Index: Makefile.in ================================================================== --- Makefile.in +++ Makefile.in @@ -43,11 +43,11 @@ # TCC += @TCL_INCLUDE_SPEC@ # The library that programs using TCL must link against. # -LIBTCL = @TCL_LIB_SPEC@ @TCL_LIBS@ +LIBTCL = @TCL_LIB_SPEC@ # Compiler options needed for programs that use the readline() library. # READLINE_FLAGS = -DHAVE_READLINE=@TARGET_HAVE_READLINE@ @TARGET_READLINE_INC@ @@ -165,10 +165,11 @@ backup.lo bitvec.lo btmutex.lo btree.lo build.lo \ callback.lo complete.lo ctime.lo date.lo delete.lo \ expr.lo fault.lo fkey.lo \ fts3.lo fts3_aux.lo fts3_expr.lo fts3_hash.lo fts3_icu.lo \ fts3_porter.lo fts3_snippet.lo fts3_tokenizer.lo fts3_tokenizer1.lo \ + fts3_tokenize_vtab.lo \ fts3_unicode.lo fts3_unicode2.lo fts3_write.lo \ func.lo global.lo hash.lo \ icu.lo insert.lo journal.lo legacy.lo loadext.lo \ main.lo malloc.lo mem0.lo mem1.lo mem2.lo mem3.lo mem5.lo \ memjournal.lo \ @@ -279,11 +280,12 @@ $(TOP)/src/vdbeInt.h \ $(TOP)/src/vtab.c \ $(TOP)/src/wal.c \ $(TOP)/src/wal.h \ $(TOP)/src/walker.c \ - $(TOP)/src/where.c + $(TOP)/src/where.c \ + $(TOP)/src/whereInt.h # Source code for extensions # SRC += \ $(TOP)/ext/fts1/fts1.c \ @@ -315,10 +317,11 @@ $(TOP)/ext/fts3/fts3_porter.c \ $(TOP)/ext/fts3/fts3_snippet.c \ $(TOP)/ext/fts3/fts3_tokenizer.h \ $(TOP)/ext/fts3/fts3_tokenizer.c \ $(TOP)/ext/fts3/fts3_tokenizer1.c \ + $(TOP)/ext/fts3/fts3_tokenize_vtab.c \ $(TOP)/ext/fts3/fts3_unicode.c \ $(TOP)/ext/fts3/fts3_unicode2.c \ $(TOP)/ext/fts3/fts3_write.c SRC += \ $(TOP)/ext/icu/sqliteicu.h \ @@ -356,12 +359,12 @@ $(TOP)/src/test_backup.c \ $(TOP)/src/test_btree.c \ $(TOP)/src/test_config.c \ $(TOP)/src/test_demovfs.c \ $(TOP)/src/test_devsym.c \ + $(TOP)/src/test_fs.c \ $(TOP)/src/test_func.c \ - $(TOP)/src/test_fuzzer.c \ $(TOP)/src/test_hexio.c \ $(TOP)/src/test_init.c \ $(TOP)/src/test_intarray.c \ $(TOP)/src/test_journal.c \ $(TOP)/src/test_malloc.c \ @@ -378,15 +381,28 @@ $(TOP)/src/test_syscall.c \ $(TOP)/src/test_stat.c \ $(TOP)/src/test_tclvar.c \ $(TOP)/src/test_thread.c \ $(TOP)/src/test_vfs.c \ - $(TOP)/src/test_wholenumber.c \ $(TOP)/src/test_wsd.c \ $(TOP)/ext/fts3/fts3_term.c \ $(TOP)/ext/fts3/fts3_test.c +# Statically linked extensions +# +TESTSRC += \ + $(TOP)/ext/misc/amatch.c \ + $(TOP)/ext/misc/closure.c \ + $(TOP)/ext/misc/fuzzer.c \ + $(TOP)/ext/misc/ieee754.c \ + $(TOP)/ext/misc/nextchar.c \ + $(TOP)/ext/misc/percentile.c \ + $(TOP)/ext/misc/regexp.c \ + $(TOP)/ext/misc/spellfix.c \ + $(TOP)/ext/misc/totype.c \ + $(TOP)/ext/misc/wholenumber.c + # Source code to the library files needed by the test fixture # TESTSRC2 = \ $(TOP)/src/attach.c \ $(TOP)/src/backup.c \ @@ -397,10 +413,11 @@ $(TOP)/src/date.c \ $(TOP)/src/expr.c \ $(TOP)/src/func.c \ $(TOP)/src/insert.c \ $(TOP)/src/wal.c \ + $(TOP)/src/main.c \ $(TOP)/src/mem5.c \ $(TOP)/src/os.c \ $(TOP)/src/os_unix.c \ $(TOP)/src/os_win.c \ $(TOP)/src/pager.c \ @@ -448,10 +465,11 @@ $(TOP)/src/sqlite3ext.h \ $(TOP)/src/sqliteInt.h \ $(TOP)/src/sqliteLimit.h \ $(TOP)/src/vdbe.h \ $(TOP)/src/vdbeInt.h \ + $(TOP)/src/whereInt.h \ config.h # Header files used by extensions # EXTHDR += \ @@ -484,24 +502,29 @@ sqlite3.pc: $(TOP)/sqlite3.pc.in ./config.status libsqlite3.la: $(LIBOBJ) - $(LTLINK) -o $@ $(LIBOBJ) $(TLIBS) \ + $(LTLINK) -no-undefined -o $@ $(LIBOBJ) $(TLIBS) \ ${ALLOWRELEASE} -rpath "$(libdir)" -version-info "8:6:8" libtclsqlite3.la: tclsqlite.lo libsqlite3.la - $(LTLINK) -o $@ tclsqlite.lo \ + $(LTLINK) -no-undefined -o $@ tclsqlite.lo \ libsqlite3.la @TCL_STUB_LIB_SPEC@ $(TLIBS) \ -rpath "$(TCLLIBDIR)" \ -version-info "8:6:8" \ -avoid-version sqlite3$(TEXE): $(TOP)/src/shell.c libsqlite3.la sqlite3.h $(LTLINK) $(READLINE_FLAGS) \ -o $@ $(TOP)/src/shell.c libsqlite3.la \ $(LIBREADLINE) $(TLIBS) -rpath "$(libdir)" + +mptester$(EXE): sqlite3.c $(TOP)/mptest/mptest.c + $(LTLINK) -o $@ -I. $(TOP)/mptest/mptest.c sqlite3.c \ + $(TLIBS) -rpath "$(libdir)" + # This target creates a directory named "tsrc" and fills it with # copies of all of the C source code and header files needed to # build on the target system. Some of the C source code and header # files are automatically generated. This target takes care of @@ -510,16 +533,17 @@ .target_source: $(SRC) $(TOP)/tool/vdbe-compress.tcl rm -rf tsrc mkdir tsrc cp -f $(SRC) tsrc rm tsrc/sqlite.h.in tsrc/parse.y - $(TCLSH_CMD) $(TOP)/tool/vdbe-compress.tcl vdbe.new + $(TCLSH_CMD) $(TOP)/tool/vdbe-compress.tcl $(OPTS) vdbe.new mv vdbe.new tsrc/vdbe.c touch .target_source sqlite3.c: .target_source $(TOP)/tool/mksqlite3c.tcl $(TCLSH_CMD) $(TOP)/tool/mksqlite3c.tcl + cp tsrc/shell.c tsrc/sqlite3ext.h . tclsqlite3.c: sqlite3.c echo '#ifndef USE_SYSTEM_SQLITE' >tclsqlite3.c cat sqlite3.c >>tclsqlite3.c echo '#endif /* USE_SYSTEM_SQLITE */' >>tclsqlite3.c @@ -852,10 +876,13 @@ $(LTCOMPILE) -DSQLITE_CORE -c $(TOP)/ext/fts3/fts3_tokenizer.c fts3_tokenizer1.lo: $(TOP)/ext/fts3/fts3_tokenizer1.c $(HDR) $(EXTHDR) $(LTCOMPILE) -DSQLITE_CORE -c $(TOP)/ext/fts3/fts3_tokenizer1.c +fts3_tokenize_vtab.lo: $(TOP)/ext/fts3/fts3_tokenize_vtab.c $(HDR) $(EXTHDR) + $(LTCOMPILE) -DSQLITE_CORE -c $(TOP)/ext/fts3/fts3_tokenize_vtab.c + fts3_unicode.lo: $(TOP)/ext/fts3/fts3_unicode.c $(HDR) $(EXTHDR) $(LTCOMPILE) -DSQLITE_CORE -c $(TOP)/ext/fts3/fts3_unicode.c fts3_unicode2.lo: $(TOP)/ext/fts3/fts3_unicode2.c $(HDR) $(EXTHDR) $(LTCOMPILE) -DSQLITE_CORE -c $(TOP)/ext/fts3/fts3_unicode2.c @@ -878,11 +905,12 @@ TESTFIXTURE_FLAGS += -DSQLITE_SERVER=1 -DSQLITE_PRIVATE="" -DSQLITE_CORE TESTFIXTURE_FLAGS += -DBUILD_sqlite TESTFIXTURE_SRC0 = $(TESTSRC2) libsqlite3.la TESTFIXTURE_SRC1 = sqlite3.c -TESTFIXTURE_SRC = $(TESTSRC) $(TOP)/src/tclsqlite.c $(TESTFIXTURE_SRC$(USE_AMALGAMATION)) +TESTFIXTURE_SRC = $(TESTSRC) $(TOP)/src/tclsqlite.c +TESTFIXTURE_SRC += $(TESTFIXTURE_SRC$(USE_AMALGAMATION)) testfixture$(TEXE): $(TESTFIXTURE_SRC) $(LTLINK) -DSQLITE_NO_SYNC=1 $(TEMP_STORE) $(TESTFIXTURE_FLAGS) \ -o $@ $(TESTFIXTURE_SRC) $(LIBTCL) $(TLIBS) @@ -890,10 +918,13 @@ fulltest: testfixture$(TEXE) sqlite3$(TEXE) ./testfixture$(TEXE) $(TOP)/test/all.test soaktest: testfixture$(TEXE) sqlite3$(TEXE) ./testfixture$(TEXE) $(TOP)/test/all.test -soak=1 + +fulltestonly: testfixture$(TEXE) sqlite3$(TEXE) + ./testfixture$(TEXE) $(TOP)/test/full.test test: testfixture$(TEXE) sqlite3$(TEXE) ./testfixture$(TEXE) $(TOP)/test/veryquick.test sqlite3_analyzer.c: sqlite3.c $(TOP)/src/test_stat.c $(TOP)/src/tclsqlite.c $(TOP)/tool/spaceanal.tcl @@ -905,10 +936,19 @@ echo "; return zMainloop; }" >> $@ sqlite3_analyzer$(TEXE): sqlite3_analyzer.c $(LTLINK) sqlite3_analyzer.c -o $@ $(LIBTCL) $(TLIBS) +showdb$(TEXE): $(TOP)/tool/showdb.c sqlite3.c + $(LTLINK) -o $@ $(TOP)/tool/showdb.c sqlite3.c $(TLIBS) + +wordcount$(TEXE): $(TOP)/test/wordcount.c sqlite3.c + $(LTLINK) -o $@ $(TOP)/test/wordcount.c sqlite3.c $(TLIBS) + +speedtest1$(TEXE): $(TOP)/test/wordcount.c sqlite3.lo + $(LTLINK) -o $@ $(TOP)/test/speedtest1.c sqlite3.lo $(TLIBS) + # Standard install and cleanup targets # lib_install: libsqlite3.la $(INSTALL) -d $(DESTDIR)$(libdir) $(LTINSTALL) libsqlite3.la $(DESTDIR)$(libdir) @@ -934,20 +974,22 @@ rm -f *.lo *.la *.o sqlite3$(TEXE) libsqlite3.la rm -f sqlite3.h opcodes.* rm -rf .libs .deps rm -f lemon$(BEXE) lempar.c parse.* sqlite*.tar.gz rm -f mkkeywordhash$(BEXE) keywordhash.h - rm -f $(PUBLISH) rm -f *.da *.bb *.bbg gmon.out rm -rf quota2a quota2b quota2c rm -rf tsrc .target_source rm -f tclsqlite3$(TEXE) rm -f testfixture$(TEXE) test.db rm -f sqlite3.dll sqlite3.lib sqlite3.exp sqlite3.def rm -f sqlite3.c + rm -f sqlite3rc.h + rm -f shell.c sqlite3ext.h rm -f sqlite3_analyzer$(TEXE) sqlite3_analyzer.c - rm -f sqlite-output.vsix + rm -f sqlite-*-output.vsix + rm -f mptester mptester.exe distclean: clean rm -f config.log config.status libtool Makefile sqlite3.pc # Index: Makefile.msc ================================================================== --- Makefile.msc +++ Makefile.msc @@ -7,39 +7,93 @@ # TOP = . # Set this non-0 to create and use the SQLite amalgamation file. # +!IFNDEF USE_AMALGAMATION USE_AMALGAMATION = 1 +!ENDIF + +# Set this non-0 to split the SQLite amalgamation file into chunks to +# be used for debugging with Visual Studio. +# +!IFNDEF SPLIT_AMALGAMATION +SPLIT_AMALGAMATION = 0 +!ENDIF # Set this non-0 to use the International Components for Unicode (ICU). # +!IFNDEF USE_ICU USE_ICU = 0 +!ENDIF # Set this non-0 to dynamically link to the MSVC runtime library. # +!IFNDEF USE_CRT_DLL USE_CRT_DLL = 0 +!ENDIF + +# Set this non-0 to generate assembly code listings for the source code +# files. +# +!IFNDEF USE_LISTINGS +USE_LISTINGS = 0 +!ENDIF + +# Set this non-0 to attempt setting the native compiler automatically +# for cross-compiling the command line tools needed during the compilation +# process. +# +!IFNDEF XCOMPILE +XCOMPILE = 0 +!ENDIF # Set this non-0 to use the native libraries paths for cross-compiling # the command line tools needed during the compilation process. # +!IFNDEF USE_NATIVE_LIBPATHS USE_NATIVE_LIBPATHS = 0 +!ENDIF + +# Set this 0 to skip the compiling and embedding of version resources. +# +!IFNDEF USE_RC +USE_RC = 1 +!ENDIF # Set this non-0 to compile binaries suitable for the WinRT environment. # This setting does not apply to any binaries that require Tcl to operate # properly (i.e. the text fixture, etc). # +!IFNDEF FOR_WINRT FOR_WINRT = 0 +!ENDIF # Set this non-0 to skip attempting to look for and/or link with the Tcl # runtime library. # +!IFNDEF NO_TCL NO_TCL = 0 +!ENDIF # Set this to non-0 to create and use PDBs. # +!IFNDEF SYMBOLS SYMBOLS = 1 +!ENDIF + +# Set this to non-0 to use the SQLite debugging heap subsystem. +# +!IFNDEF MEMDEBUG +MEMDEBUG = 0 +!ENDIF + +# Set this to non-0 to use the Win32 native heap subsystem. +# +!IFNDEF WIN32HEAP +WIN32HEAP = 0 +!ENDIF # Set this to one of the following values to enable various debugging # features. Each level includes the debugging options from the previous # levels. Currently, the recognized values for DEBUG are: # @@ -48,11 +102,21 @@ # 2 == SQLITE_DEBUG: Enables various diagnostics messages and code. # 3 == SQLITE_WIN32_MALLOC_VALIDATE: Validate the Win32 native heap per call. # 4 == SQLITE_DEBUG_OS_TRACE: Enables output from the OSTRACE() macros. # 5 == SQLITE_ENABLE_IOTRACE: Enables output from the IOTRACE() macros. # +!IFNDEF DEBUG DEBUG = 0 +!ENDIF + +# Enable use of available compiler optimizations? Normally, this should be +# non-zero. Setting this to zero, thus disabling all compiler optimizations, +# can be useful for testing. +# +!IFNDEF OPTIMIZATIONS +OPTIMIZATIONS = 2 +!ENDIF # Check for the predefined command macro CC. This should point to the compiler # binary for the target platform. If it is not defined, simply define it to # the legacy default value 'cl.exe'. # @@ -65,25 +129,43 @@ # default value 'link.exe'. # !IFNDEF LD LD = link.exe !ENDIF + +# Check for the predefined command macro RC. This should point to the resource +# compiler binary for the target platform. If it is not defined, simply define +# it to the legacy default value 'rc.exe'. +# +!IFNDEF RC +RC = rc.exe +!ENDIF # Check for the command macro NCC. This should point to the compiler binary # for the platform the compilation process is taking place on. If it is not # defined, simply define it to have the same value as the CC macro. When # cross-compiling, it is suggested that this macro be modified via the command # line (since nmake itself does not provide a built-in method to guess it). # For example, to use the x86 compiler when cross-compiling for x64, a command # line similar to the following could be used (all on one line): +# +# nmake /f Makefile.msc sqlite3.dll +# XCOMPILE=1 USE_NATIVE_LIBPATHS=1 +# +# Alternatively, the full path and file name to the compiler binary for the +# platform the compilation process is taking place may be specified (all on +# one line): # # nmake /f Makefile.msc sqlite3.dll # "NCC=""%VCINSTALLDIR%\bin\cl.exe""" # USE_NATIVE_LIBPATHS=1 # !IFDEF NCC NCC = $(NCC:\\=\) +!ELSEIF $(XCOMPILE)!=0 +NCC = "$(VCINSTALLDIR)\bin\$(CC)" +NCC = $(NCC:\\=\) !ELSE NCC = $(CC) !ENDIF # Check for the MSVC runtime library path macro. Othertise, this @@ -110,10 +192,17 @@ # C compiler and options for use in building executables that # will run on the platform that is doing the build. # BCC = $(NCC) -W3 + +# Check if assembly code listings should be generated for the source +# code files to be compiled. +# +!IF $(USE_LISTINGS)!=0 +BCC = $(BCC) -FAcs +!ENDIF # Check if the native library paths should be used when compiling # the command line tools used during the compilation process. If # so, set the necessary macro now. # @@ -123,20 +212,30 @@ # C compiler and options for use in building executables that # will run on the target platform. (BCC and TCC are usually the # same unless your are cross-compiling.) # -TCC = $(CC) -W3 -DSQLITE_OS_WIN=1 -I. -I$(TOP)\src -fp:precise +TCC = $(CC) -W3 -DSQLITE_OS_WIN=1 -I. -I$(TOP) -I$(TOP)\src -fp:precise +RCC = $(RC) -DSQLITE_OS_WIN=1 -I$(TOP) -I$(TOP)\src + +# Check if assembly code listings should be generated for the source +# code files to be compiled. +# +!IF $(USE_LISTINGS)!=0 +TCC = $(TCC) -FAcs +!ENDIF # When compiling the library for use in the WinRT environment, # the following compile-time options must be used as well to # disable use of Win32 APIs that are not available and to enable # use of Win32 APIs that are specific to Windows 8 and/or WinRT. # !IF $(FOR_WINRT)!=0 TCC = $(TCC) -DSQLITE_OS_WINRT=1 -TCC = $(TCC) -DWINAPI_FAMILY=WINAPI_PARTITION_APP +RCC = $(RCC) -DSQLITE_OS_WINRT=1 +TCC = $(TCC) -DWINAPI_FAMILY=WINAPI_FAMILY_APP +RCC = $(RCC) -DWINAPI_FAMILY=WINAPI_FAMILY_APP !ENDIF # Also, we need to dynamically link to the correct MSVC runtime # when compiling for WinRT (e.g. debug or release) OR if the # USE_CRT_DLL option is set to force dynamically linking to the @@ -143,74 +242,108 @@ # MSVC runtime library. # !IF $(FOR_WINRT)!=0 || $(USE_CRT_DLL)!=0 !IF $(DEBUG)>0 TCC = $(TCC) -MDd +BCC = $(BCC) -MDd !ELSE TCC = $(TCC) -MD +BCC = $(BCC) -MD !ENDIF !ELSE !IF $(DEBUG)>0 TCC = $(TCC) -MTd +BCC = $(BCC) -MTd !ELSE TCC = $(TCC) -MT +BCC = $(BCC) -MT !ENDIF !ENDIF # The mksqlite3c.tcl and mksqlite3h.tcl scripts will pull in # any extension header files by default. For non-amalgamation # builds, we need to make sure the compiler can find these. # !IF $(USE_AMALGAMATION)==0 TCC = $(TCC) -I$(TOP)\ext\fts3 +RCC = $(RCC) -I$(TOP)\ext\fts3 TCC = $(TCC) -I$(TOP)\ext\rtree +RCC = $(RCC) -I$(TOP)\ext\rtree +!ENDIF + +# The mksqlite3c.tcl script accepts some options on the command +# line. When compiling with debugging enabled, some of these +# options are necessary in order to allow debugging symbols to +# work correctly with Visual Studio when using the amalgamation. +# +!IF $(DEBUG)>0 +MKSQLITE3C_ARGS = --linemacros +!ELSE +MKSQLITE3C_ARGS = !ENDIF # Define -DNDEBUG to compile without debugging (i.e., for production usage) # Omitting the define will cause extra debugging code to be inserted and # includes extra comments when "EXPLAIN stmt" is used. # !IF $(DEBUG)==0 TCC = $(TCC) -DNDEBUG BCC = $(BCC) -DNDEBUG +RCC = $(RCC) -DNDEBUG !ENDIF !IF $(DEBUG)>1 TCC = $(TCC) -DSQLITE_DEBUG +RCC = $(RCC) -DSQLITE_DEBUG !ENDIF !IF $(DEBUG)>3 TCC = $(TCC) -DSQLITE_DEBUG_OS_TRACE=1 +RCC = $(RCC) -DSQLITE_DEBUG_OS_TRACE=1 !ENDIF !IF $(DEBUG)>4 TCC = $(TCC) -DSQLITE_ENABLE_IOTRACE +RCC = $(RCC) -DSQLITE_ENABLE_IOTRACE !ENDIF # # Prevent warnings about "insecure" MSVC runtime library functions # being used. # TCC = $(TCC) -D_CRT_SECURE_NO_DEPRECATE -D_CRT_SECURE_NO_WARNINGS BCC = $(BCC) -D_CRT_SECURE_NO_DEPRECATE -D_CRT_SECURE_NO_WARNINGS +RCC = $(RCC) -D_CRT_SECURE_NO_DEPRECATE -D_CRT_SECURE_NO_WARNINGS # # Prevent warnings about "deprecated" POSIX functions being used. # TCC = $(TCC) -D_CRT_NONSTDC_NO_DEPRECATE -D_CRT_NONSTDC_NO_WARNINGS BCC = $(BCC) -D_CRT_NONSTDC_NO_DEPRECATE -D_CRT_NONSTDC_NO_WARNINGS +RCC = $(RCC) -D_CRT_NONSTDC_NO_DEPRECATE -D_CRT_NONSTDC_NO_WARNINGS # -# Use native Win32 heap instead of malloc/free? +# Use the SQLite debugging heap subsystem? # -# TCC = $(TCC) -DSQLITE_WIN32_MALLOC=1 +!IF $(MEMDEBUG)!=0 +TCC = $(TCC) -DSQLITE_MEMDEBUG=1 +RCC = $(RCC) -DSQLITE_MEMDEBUG=1 + +# +# Use native Win32 heap subsystem instead of malloc/free? +# +!ELSEIF $(WIN32HEAP)!=0 +TCC = $(TCC) -DSQLITE_WIN32_MALLOC=1 +RCC = $(RCC) -DSQLITE_WIN32_MALLOC=1 # # Validate the heap on every call into the native Win32 heap subsystem? # !IF $(DEBUG)>2 TCC = $(TCC) -DSQLITE_WIN32_MALLOC_VALIDATE=1 +RCC = $(RCC) -DSQLITE_WIN32_MALLOC_VALIDATE=1 +!ENDIF !ENDIF # The locations of the Tcl header and library files. Also, the library that # non-stubs enabled programs using Tcl must link against. These variables # (TCLINCDIR, TCLLIBDIR, and LIBTCL) may be overridden via the environment @@ -255,23 +388,29 @@ TCLSH_CMD = tclsh85 !ENDIF # Compiler options needed for programs that use the readline() library. # +!IFNDEF READLINE_FLAGS READLINE_FLAGS = -DHAVE_READLINE=0 +!ENDIF # The library that programs using readline() must link against. # +!IFNDEF LIBREADLINE LIBREADLINE = +!ENDIF # Should the database engine be compiled threadsafe # TCC = $(TCC) -DSQLITE_THREADSAFE=1 +RCC = $(RCC) -DSQLITE_THREADSAFE=1 # Do threads override each others locks by default (1), or do we test (-1) # TCC = $(TCC) -DSQLITE_THREAD_OVERRIDE_LOCK=-1 +RCC = $(RCC) -DSQLITE_THREAD_OVERRIDE_LOCK=-1 # Any target libraries which libsqlite must be linked against # !IFNDEF TLIBS TLIBS = @@ -282,10 +421,11 @@ # SQLITE_TEMP_STORE is 0 to force temporary tables to be in a file, 1 to # default to file, 2 to default to memory, and 3 to force temporary # tables to always be in memory. # TCC = $(TCC) -DSQLITE_TEMP_STORE=1 +RCC = $(RCC) -DSQLITE_TEMP_STORE=1 # Enable/disable loadable extensions, and other optional features # based on configuration. (-DSQLITE_OMIT*, -DSQLITE_ENABLE*). # The same set of OMIT and ENABLE flags should be passed to the # LEMON parser generator and the mkkeywordhash tool as well. @@ -299,39 +439,60 @@ # BEGIN required Windows option OPT_FEATURE_FLAGS = $(OPT_FEATURE_FLAGS) -DSQLITE_MAX_TRIGGER_DEPTH=100 # END required Windows option TCC = $(TCC) $(OPT_FEATURE_FLAGS) +RCC = $(RCC) $(OPT_FEATURE_FLAGS) # Add in any optional parameters specified on the make commane line # ie. make "OPTS=-DSQLITE_ENABLE_FOO=1 -DSQLITE_OMIT_FOO=1". TCC = $(TCC) $(OPTS) +RCC = $(RCC) $(OPTS) -# If symbols are enabled, enable PDBs. -# If debugging is enabled, disable all optimizations and enable PDBs. +# If compiling for debugging, add some defines. !IF $(DEBUG)>0 -TCC = $(TCC) -Od -D_DEBUG -BCC = $(BCC) -Od -D_DEBUG -!ELSE +TCC = $(TCC) -D_DEBUG +BCC = $(BCC) -D_DEBUG +RCC = $(RCC) -D_DEBUG +!ENDIF + +# If optimizations are enabled or disabled (either implicitly or +# explicitly), add the necessary flags. +!IF $(DEBUG)>0 || $(OPTIMIZATIONS)==0 +TCC = $(TCC) -Od +BCC = $(BCC) -Od +!ELSEIF $(OPTIMIZATIONS)>=3 +TCC = $(TCC) -Ox +BCC = $(BCC) -Ox +!ELSEIF $(OPTIMIZATIONS)==2 TCC = $(TCC) -O2 BCC = $(BCC) -O2 +!ELSEIF $(OPTIMIZATIONS)==1 +TCC = $(TCC) -O1 +BCC = $(BCC) -O1 !ENDIF +# If symbols are enabled (or compiling for debugging), enable PDBs. !IF $(DEBUG)>0 || $(SYMBOLS)!=0 TCC = $(TCC) -Zi BCC = $(BCC) -Zi !ENDIF # If ICU support is enabled, add the compiler options for it. !IF $(USE_ICU)!=0 TCC = $(TCC) -DSQLITE_ENABLE_ICU=1 +RCC = $(RCC) -DSQLITE_ENABLE_ICU=1 TCC = $(TCC) -I$(TOP)\ext\icu +RCC = $(RCC) -I$(TOP)\ext\icu TCC = $(TCC) -I$(ICUINCDIR) +RCC = $(RCC) -I$(ICUINCDIR) !ENDIF -# libtool compile/link +# Command line prefixes for compiling code, compiling resources, +# linking, etc. LTCOMPILE = $(TCC) -Fo$@ +LTRCOMPILE = $(RCC) -r LTLIB = lib.exe LTLINK = $(TCC) -Fe$@ # If a platform was set, force the linker to target that. # Note that the vcvars*.bat family of batch files typically @@ -346,10 +507,21 @@ # linker option must be used to mark the executable as runnable # only in the context of an application container. # !IF $(FOR_WINRT)!=0 LTLINKOPTS = $(LTLINKOPTS) /APPCONTAINER +!IF "$(VISUALSTUDIOVERSION)"=="12.0" +!IF "$(PLATFORM)"=="x86" +LTLINKOPTS = $(LTLINKOPTS) "/LIBPATH:$(VCINSTALLDIR)\lib\store" +!ELSEIF "$(PLATFORM)"=="x64" +LTLINKOPTS = $(LTLINKOPTS) "/LIBPATH:$(VCINSTALLDIR)\lib\store\amd64" +!ELSEIF "$(PLATFORM)"=="ARM" +LTLINKOPTS = $(LTLINKOPTS) "/LIBPATH:$(VCINSTALLDIR)\lib\store\arm" +!ELSE +LTLINKOPTS = $(LTLINKOPTS) "/LIBPATH:$(VCINSTALLDIR)\lib\store" +!ENDIF +!ENDIF !ENDIF # If either debugging or symbols are enabled, enable PDBs. !IF $(DEBUG)>0 || $(SYMBOLS)!=0 LDFLAGS = /DEBUG @@ -366,35 +538,37 @@ LTLIBPATHS = $(LTLIBPATHS) /LIBPATH:$(ICULIBDIR) LTLIBS = $(LTLIBS) $(LIBICU) !ENDIF # nawk compatible awk. +!IFNDEF NAWK NAWK = gawk.exe +!ENDIF # You should not have to change anything below this line ############################################################################### # Object files for the SQLite library (non-amalgamation). # -LIBOBJS0 = alter.lo analyze.lo attach.lo auth.lo \ +LIBOBJS0 = vdbe.lo parse.lo alter.lo analyze.lo attach.lo auth.lo \ backup.lo bitvec.lo btmutex.lo btree.lo build.lo \ callback.lo complete.lo ctime.lo date.lo delete.lo \ expr.lo fault.lo fkey.lo \ fts3.lo fts3_aux.lo fts3_expr.lo fts3_hash.lo fts3_icu.lo \ fts3_porter.lo fts3_snippet.lo fts3_tokenizer.lo fts3_tokenizer1.lo \ - fts3_unicode.lo fts3_unicode2.lo fts3_write.lo \ + fts3_tokenize_vtab.lo fts3_unicode.lo fts3_unicode2.lo fts3_write.lo \ func.lo global.lo hash.lo \ icu.lo insert.lo journal.lo legacy.lo loadext.lo \ main.lo malloc.lo mem0.lo mem1.lo mem2.lo mem3.lo mem5.lo \ memjournal.lo \ mutex.lo mutex_noop.lo mutex_unix.lo mutex_w32.lo \ notify.lo opcodes.lo os.lo os_unix.lo os_win.lo \ - pager.lo parse.lo pcache.lo pcache1.lo pragma.lo prepare.lo printf.lo \ + pager.lo pcache.lo pcache1.lo pragma.lo prepare.lo printf.lo \ random.lo resolve.lo rowset.lo rtree.lo select.lo status.lo \ table.lo threads.o tokenize.lo trigger.lo \ update.lo util.lo vacuum.lo \ - vdbe.lo vdbeapi.lo vdbeaux.lo vdbeblob.lo vdbemem.lo vdbesort.lo \ + vdbeapi.lo vdbeaux.lo vdbeblob.lo vdbemem.lo vdbesort.lo \ vdbetrace.lo wal.lo walker.lo where.lo utf.lo vtab.lo # Object files for the amalgamation. # LIBOBJS1 = sqlite3.lo @@ -404,10 +578,18 @@ !IF $(USE_AMALGAMATION)==0 LIBOBJ = $(LIBOBJS0) !ELSE LIBOBJ = $(LIBOBJS1) !ENDIF + +# Determine if embedded resource compilation and usage are enabled. +# +!IF $(USE_RC)!=0 +LIBRESOBJS = sqlite3res.lo +!ELSE +LIBRESOBJS = +!ENDIF # All of the source code files. # SRC = \ $(TOP)\src\alter.c \ @@ -496,11 +678,12 @@ $(TOP)\src\vdbeInt.h \ $(TOP)\src\vtab.c \ $(TOP)\src\wal.c \ $(TOP)\src\wal.h \ $(TOP)\src\walker.c \ - $(TOP)\src\where.c + $(TOP)\src\where.c \ + $(TOP)\src\whereInt.h # Source code for extensions # SRC = $(SRC) \ $(TOP)\ext\fts1\fts1.c \ @@ -532,10 +715,11 @@ $(TOP)\ext\fts3\fts3_porter.c \ $(TOP)\ext\fts3\fts3_snippet.c \ $(TOP)\ext\fts3\fts3_tokenizer.h \ $(TOP)\ext\fts3\fts3_tokenizer.c \ $(TOP)\ext\fts3\fts3_tokenizer1.c \ + $(TOP)\ext\fts3\fts3_tokenize_vtab.c \ $(TOP)\ext\fts3\fts3_unicode.c \ $(TOP)\ext\fts3\fts3_unicode2.c \ $(TOP)\ext\fts3\fts3_write.c SRC = $(SRC) \ $(TOP)\ext\icu\sqliteicu.h \ @@ -572,12 +756,12 @@ $(TOP)\src\test_backup.c \ $(TOP)\src\test_btree.c \ $(TOP)\src\test_config.c \ $(TOP)\src\test_demovfs.c \ $(TOP)\src\test_devsym.c \ + $(TOP)\src\test_fs.c \ $(TOP)\src\test_func.c \ - $(TOP)\src\test_fuzzer.c \ $(TOP)\src\test_hexio.c \ $(TOP)\src\test_init.c \ $(TOP)\src\test_intarray.c \ $(TOP)\src\test_journal.c \ $(TOP)\src\test_malloc.c \ @@ -594,14 +778,28 @@ $(TOP)\src\test_syscall.c \ $(TOP)\src\test_stat.c \ $(TOP)\src\test_tclvar.c \ $(TOP)\src\test_thread.c \ $(TOP)\src\test_vfs.c \ - $(TOP)\src\test_wholenumber.c \ $(TOP)\src\test_wsd.c \ $(TOP)\ext\fts3\fts3_term.c \ $(TOP)\ext\fts3\fts3_test.c + +# Statically linked extensions +# +TESTEXT = \ + $(TOP)\ext\misc\amatch.c \ + $(TOP)\ext\misc\closure.c \ + $(TOP)\ext\misc\fuzzer.c \ + $(TOP)\ext\misc\ieee754.c \ + $(TOP)\ext\misc\nextchar.c \ + $(TOP)\ext\misc\percentile.c \ + $(TOP)\ext\misc\regexp.c \ + $(TOP)\ext\misc\spellfix.c \ + $(TOP)\ext\misc\totype.c \ + $(TOP)\ext\misc\wholenumber.c + # Source code to the library files needed by the test fixture # TESTSRC2 = \ $(TOP)\src\attach.c \ @@ -613,10 +811,11 @@ $(TOP)\src\date.c \ $(TOP)\src\expr.c \ $(TOP)\src\func.c \ $(TOP)\src\insert.c \ $(TOP)\src\wal.c \ + $(TOP)\src\main.c \ $(TOP)\src\mem5.c \ $(TOP)\src\os.c \ $(TOP)\src\os_unix.c \ $(TOP)\src\os_win.c \ $(TOP)\src\pager.c \ @@ -640,10 +839,11 @@ parse.c \ $(TOP)\ext\fts3\fts3.c \ $(TOP)\ext\fts3\fts3_aux.c \ $(TOP)\ext\fts3\fts3_expr.c \ $(TOP)\ext\fts3\fts3_tokenizer.c \ + $(TOP)\ext\fts3\fts3_tokenize_vtab.c \ $(TOP)\ext\fts3\fts3_unicode.c \ $(TOP)\ext\fts3\fts3_unicode2.c \ $(TOP)\ext\fts3\fts3_write.c \ $(TOP)\ext\async\sqlite3async.c @@ -665,11 +865,12 @@ sqlite3.h \ $(TOP)\src\sqlite3ext.h \ $(TOP)\src\sqliteInt.h \ $(TOP)\src\sqliteLimit.h \ $(TOP)\src\vdbe.h \ - $(TOP)\src\vdbeInt.h + $(TOP)\src\vdbeInt.h \ + $(TOP)\src\whereInt.h # Header files used by extensions # EXTHDR = $(EXTHDR) \ $(TOP)\ext\fts1\fts1.h \ @@ -700,14 +901,18 @@ $(LTLIB) $(LTLIBOPTS) /OUT:$@ $(LIBOBJ) $(TLIBS) libtclsqlite3.lib: tclsqlite.lo libsqlite3.lib $(LTLIB) $(LTLIBOPTS) $(LTLIBPATHS) /OUT:$@ tclsqlite.lo libsqlite3.lib $(LIBTCL:tcl=tclstub) $(TLIBS) -sqlite3.exe: $(TOP)\src\shell.c libsqlite3.lib sqlite3.h +sqlite3.exe: $(TOP)\src\shell.c libsqlite3.lib $(LIBRESOBJS) sqlite3.h $(LTLINK) $(READLINE_FLAGS) \ $(TOP)\src\shell.c \ - /link $(LTLINKOPTS) $(LTLIBPATHS) libsqlite3.lib $(LIBREADLINE) $(LTLIBS) $(TLIBS) + /link $(LTLINKOPTS) $(LTLIBPATHS) libsqlite3.lib $(LIBRESOBJS) $(LIBREADLINE) $(LTLIBS) $(TLIBS) + +mptester.exe: $(TOP)\mptest\mptest.c libsqlite3.lib $(LIBRESOBJS) sqlite3.h + $(LTLINK) $(TOP)\mptest\mptest.c \ + /link $(LTLINKOPTS) $(LTLIBPATHS) libsqlite3.lib $(LIBRESOBJS) $(LIBREADLINE) $(LTLIBS) $(TLIBS) # This target creates a directory named "tsrc" and fills it with # copies of all of the C source code and header files needed to # build on the target system. Some of the C source code and header # files are automatically generated. This target takes care of @@ -716,24 +921,35 @@ .target_source: $(SRC) $(TOP)\tool\vdbe-compress.tcl -rmdir /S/Q tsrc -mkdir tsrc for %i in ($(SRC)) do copy /Y %i tsrc del /Q tsrc\sqlite.h.in tsrc\parse.y - $(TCLSH_CMD) $(TOP)\tool\vdbe-compress.tcl < tsrc\vdbe.c > vdbe.new + $(TCLSH_CMD) $(TOP)\tool\vdbe-compress.tcl $(OPTS) < tsrc\vdbe.c > vdbe.new move vdbe.new tsrc\vdbe.c echo > .target_source sqlite3.c: .target_source $(TOP)\tool\mksqlite3c.tcl - $(TCLSH_CMD) $(TOP)\tool\mksqlite3c.tcl + $(TCLSH_CMD) $(TOP)\tool\mksqlite3c.tcl $(MKSQLITE3C_ARGS) + copy tsrc\shell.c . + copy tsrc\sqlite3ext.h . -sqlite3-all.c: sqlite3.c $(TOP)/tool/split-sqlite3c.tcl - $(TCLSH_CMD) $(TOP)/tool/split-sqlite3c.tcl +sqlite3-all.c: sqlite3.c $(TOP)\tool\split-sqlite3c.tcl + $(TCLSH_CMD) $(TOP)\tool\split-sqlite3c.tcl + +# Set the source code file to be used by executables and libraries when +# they need the amalgamation. +# +!IF $(SPLIT_AMALGAMATION)!=0 +SQLITE3C = sqlite3-all.c +!ELSE +SQLITE3C = sqlite3.c +!ENDIF # Rule to build the amalgamation # -sqlite3.lo: sqlite3.c - $(LTCOMPILE) -c sqlite3.c +sqlite3.lo: $(SQLITE3C) + $(LTCOMPILE) -c $(SQLITE3C) # Rules to build the LEMON compiler generator # lempar.c: $(TOP)\src\lempar.c copy $(TOP)\src\lempar.c . @@ -750,10 +966,23 @@ parse.lo: parse.c $(HDR) $(LTCOMPILE) -c parse.c opcodes.lo: opcodes.c $(LTCOMPILE) -c opcodes.c + +# Rule to build the Win32 resources object file. +# +!IF $(USE_RC)!=0 +$(LIBRESOBJS): $(TOP)\src\sqlite3.rc $(HDR) + echo #ifndef SQLITE_RESOURCE_VERSION > sqlite3rc.h + for /F %%V in ('type "$(TOP)\VERSION"') do ( \ + echo #define SQLITE_RESOURCE_VERSION %%V \ + | $(NAWK) "/.*/ { gsub(/[.]/,\",\");print }" >> sqlite3rc.h \ + ) + echo #endif >> sqlite3rc.h + $(LTRCOMPILE) -fo $(LIBRESOBJS) $(TOP)\src\sqlite3.rc +!ENDIF # Rules to build individual *.lo files from files in the src directory. # alter.lo: $(TOP)\src\alter.c $(HDR) $(LTCOMPILE) -c $(TOP)\src\alter.c @@ -969,13 +1198,12 @@ $(LTCOMPILE) -DUSE_TCL_STUBS=1 -DBUILD_sqlite -I$(TCLINCDIR) -c $(TOP)\src\tclsqlite.c tclsqlite-shell.lo: $(TOP)\src\tclsqlite.c $(HDR) $(LTCOMPILE) -DTCLSH=1 -DBUILD_sqlite -I$(TCLINCDIR) -c $(TOP)\src\tclsqlite.c -tclsqlite3.exe: tclsqlite-shell.lo libsqlite3.lib - $(LTLINK) tclsqlite-shell.lo \ - /link $(LTLINKOPTS) $(LTLIBPATHS) libsqlite3.lib $(LTLIBS) $(TLIBS) +tclsqlite3.exe: tclsqlite-shell.lo libsqlite3.lib $(LIBRESOBJS) + $(LD) $(LDFLAGS) $(LTLINKOPTS) $(LTLIBPATHS) /OUT:$@ libsqlite3.lib tclsqlite-shell.lo $(LIBRESOBJS) $(LTLIBS) $(TLIBS) # Rules to build opcodes.c and opcodes.h # opcodes.c: opcodes.h $(TOP)\mkopcodec.awk $(NAWK) -f $(TOP)\mkopcodec.awk opcodes.h > opcodes.c @@ -993,11 +1221,11 @@ .\lemon.exe $(OPT_FEATURE_FLAGS) $(OPTS) parse.y move parse.h parse.h.temp $(NAWK) -f $(TOP)\addopcodes.awk parse.h.temp > parse.h sqlite3.h: $(TOP)\src\sqlite.h.in $(TOP)\manifest.uuid $(TOP)\VERSION - $(TCLSH_CMD) $(TOP)\tool\mksqlite3h.tcl $(TOP) > sqlite3.h + $(TCLSH_CMD) $(TOP)\tool\mksqlite3h.tcl $(TOP:\=/) > sqlite3.h mkkeywordhash.exe: $(TOP)\tool\mkkeywordhash.c $(BCC) -Fe$@ $(OPT_FEATURE_FLAGS) $(OPTS) $(TOP)\tool\mkkeywordhash.c /link $(NLTLIBPATHS) keywordhash.h: $(TOP)\tool\mkkeywordhash.c mkkeywordhash.exe @@ -1053,10 +1281,13 @@ $(LTCOMPILE) -DSQLITE_CORE -c $(TOP)\ext\fts3\fts3_tokenizer.c fts3_tokenizer1.lo: $(TOP)\ext\fts3\fts3_tokenizer1.c $(HDR) $(EXTHDR) $(LTCOMPILE) -DSQLITE_CORE -c $(TOP)\ext\fts3\fts3_tokenizer1.c +fts3_tokenize_vtab.lo: $(TOP)\ext\fts3\fts3_tokenize_vtab.c $(HDR) $(EXTHDR) + $(LTCOMPILE) -DSQLITE_CORE -c $(TOP)\ext\fts3\fts3_tokenize_vtab.c + fts3_unicode.lo: $(TOP)\ext\fts3\fts3_unicode.c $(HDR) $(EXTHDR) $(LTCOMPILE) -DSQLITE_CORE -c $(TOP)\ext\fts3\fts3_unicode.c fts3_unicode2.lo: $(TOP)\ext\fts3\fts3_unicode2.c $(HDR) $(EXTHDR) $(LTCOMPILE) -DSQLITE_CORE -c $(TOP)\ext\fts3\fts3_unicode2.c @@ -1076,72 +1307,103 @@ # hidden when the library is built via the amalgamation). # TESTFIXTURE_FLAGS = -DTCLSH=1 -DSQLITE_TEST=1 -DSQLITE_CRASH_TEST=1 TESTFIXTURE_FLAGS = $(TESTFIXTURE_FLAGS) -DSQLITE_SERVER=1 -DSQLITE_PRIVATE="" -DSQLITE_CORE -TESTFIXTURE_SRC0 = $(TESTSRC2) libsqlite3.lib -TESTFIXTURE_SRC1 = sqlite3.c +TESTFIXTURE_SRC0 = $(TESTEXT) $(TESTSRC2) libsqlite3.lib +TESTFIXTURE_SRC1 = $(TESTEXT) $(SQLITE3C) !IF $(USE_AMALGAMATION)==0 TESTFIXTURE_SRC = $(TESTSRC) $(TOP)\src\tclsqlite.c $(TESTFIXTURE_SRC0) !ELSE TESTFIXTURE_SRC = $(TESTSRC) $(TOP)\src\tclsqlite.c $(TESTFIXTURE_SRC1) !ENDIF -testfixture.exe: $(TESTFIXTURE_SRC) $(HDR) +testfixture.exe: $(TESTFIXTURE_SRC) $(LIBRESOBJS) $(HDR) $(LTLINK) -DSQLITE_NO_SYNC=1 $(TESTFIXTURE_FLAGS) \ -DBUILD_sqlite -I$(TCLINCDIR) \ $(TESTFIXTURE_SRC) \ - /link $(LTLINKOPTS) $(LTLIBPATHS) $(LTLIBS) $(TLIBS) + /link $(LTLINKOPTS) $(LTLIBPATHS) $(LIBRESOBJS) $(LTLIBS) $(TLIBS) + +extensiontest: testfixture.exe testloadext.dll + .\testfixture.exe $(TOP)\test\loadext.test fulltest: testfixture.exe sqlite3.exe .\testfixture.exe $(TOP)\test\all.test soaktest: testfixture.exe sqlite3.exe .\testfixture.exe $(TOP)\test\all.test -soak=1 +fulltestonly: testfixture.exe sqlite3.exe + .\testfixture.exe $(TOP)\test\full.test + +queryplantest: testfixture.exe sqlite3.exe + .\testfixture.exe $(TOP)\test\permutations.test queryplanner + test: testfixture.exe sqlite3.exe .\testfixture.exe $(TOP)\test\veryquick.test -sqlite3_analyzer.c: sqlite3.c $(TOP)\src\test_stat.c $(TOP)\src\tclsqlite.c $(TOP)\tool\spaceanal.tcl - copy sqlite3.c + $(TOP)\src\test_stat.c + $(TOP)\src\tclsqlite.c $@ +sqlite3_analyzer.c: $(SQLITE3C) $(TOP)\src\test_stat.c $(TOP)\src\tclsqlite.c $(TOP)\tool\spaceanal.tcl + copy $(SQLITE3C) + $(TOP)\src\test_stat.c + $(TOP)\src\tclsqlite.c $@ echo static const char *tclsh_main_loop(void){ >> $@ echo static const char *zMainloop = >> $@ $(NAWK) -f $(TOP)\tool\tostr.awk $(TOP)\tool\spaceanal.tcl >> $@ echo ; return zMainloop; } >> $@ -sqlite3_analyzer.exe: sqlite3_analyzer.c +sqlite3_analyzer.exe: sqlite3_analyzer.c $(LIBRESOBJS) $(LTLINK) -DBUILD_sqlite -DTCLSH=2 -I$(TCLINCDIR) sqlite3_analyzer.c \ - /link $(LTLINKOPTS) $(LTLIBPATHS) $(LTLIBS) $(TLIBS) + /link $(LTLINKOPTS) $(LTLIBPATHS) $(LIBRESOBJS) $(LTLIBS) $(TLIBS) + +testloadext.lo: $(TOP)\src\test_loadext.c + $(LTCOMPILE) -c $(TOP)\src\test_loadext.c + +testloadext.dll: testloadext.lo + $(LD) $(LDFLAGS) $(LTLINKOPTS) $(LTLIBPATHS) /DLL /OUT:$@ testloadext.lo + +showdb.exe: $(TOP)\tool\showdb.c $(SQLITE3C) + $(LTLINK) -DSQLITE_THREADSAFE=0 -DSQLITE_OMIT_LOAD_EXTENSION -Fe$@ \ + $(TOP)\tool\showdb.c $(SQLITE3C) + +wordcount.exe: $(TOP)\test\wordcount.c $(SQLITE3C) + $(LTLINK) -DSQLITE_THREADSAFE=0 -DSQLITE_OMIT_LOAD_EXTENSION -Fe$@ \ + $(TOP)\test\wordcount.c $(SQLITE3C) + +speedtest1.exe: $(TOP)\test\speedtest1.c $(SQLITE3C) + $(LTLINK) -DSQLITE_OMIT_LOAD_EXTENSION -Fe$@ \ + $(TOP)\test\speedtest1.c $(SQLITE3C) clean: del /Q *.lo *.ilk *.lib *.obj *.pdb sqlite3.exe libsqlite3.lib - del /Q *.da *.bb *.bbg gmon.out + del /Q *.cod *.da *.bb *.bbg gmon.out del /Q sqlite3.h opcodes.c opcodes.h del /Q lemon.exe lempar.c parse.* del /Q mkkeywordhash.exe keywordhash.h + del /Q notasharedlib.* -rmdir /Q/S .deps -rmdir /Q/S .libs -rmdir /Q/S quota2a -rmdir /Q/S quota2b -rmdir /Q/S quota2c -rmdir /Q/S tsrc del /Q .target_source - del /Q tclsqlite3.exe + del /Q tclsqlite3.exe tclsqlite3.exp + del /Q testloadext.dll testloadext.exp del /Q testfixture.exe testfixture.exp test.db del /Q sqlite3.dll sqlite3.lib sqlite3.exp sqlite3.def - del /Q sqlite3.c + del /Q sqlite3.c sqlite3-*.c + del /Q sqlite3rc.h + del /Q shell.c sqlite3ext.h del /Q sqlite3_analyzer.exe sqlite3_analyzer.exp sqlite3_analyzer.c - del /Q sqlite-output.vsix + del /Q sqlite-*-output.vsix + del /Q mptester.exe -# -# Windows section +# Dynamic link library section. # dll: sqlite3.dll sqlite3.def: libsqlite3.lib echo EXPORTS > sqlite3.def dumpbin /all libsqlite3.lib \ | $(NAWK) "/ 1 _?sqlite3_/ { sub(/^.* _?/,\"\");print }" \ | sort >> sqlite3.def -sqlite3.dll: $(LIBOBJ) sqlite3.def - $(LD) $(LDFLAGS) $(LTLINKOPTS) $(LTLIBPATHS) /DLL /DEF:sqlite3.def /OUT:$@ $(LIBOBJ) $(LTLIBS) $(TLIBS) +sqlite3.dll: $(LIBOBJ) $(LIBRESOBJS) sqlite3.def + $(LD) $(LDFLAGS) $(LTLINKOPTS) $(LTLIBPATHS) /DLL /DEF:sqlite3.def /OUT:$@ $(LIBOBJ) $(LIBRESOBJS) $(LTLIBS) $(TLIBS) Index: Makefile.vxworks ================================================================== --- Makefile.vxworks +++ Makefile.vxworks @@ -623,10 +623,13 @@ ./testfixture$(EXE) $(TOP)/test/all.test soaktest: testfixture$(EXE) sqlite3$(EXE) ./testfixture$(EXE) $(TOP)/test/all.test -soak=1 +fulltestonly: testfixture$(EXE) sqlite3$(EXE) + ./testfixture$(EXE) $(TOP)/test/full.test + test: testfixture$(EXE) sqlite3$(EXE) ./testfixture$(EXE) $(TOP)/test/veryquick.test sqlite3_analyzer$(EXE): $(TOP)/src/tclsqlite.c sqlite3.c $(TESTSRC) \ $(TOP)/tool/spaceanal.tcl @@ -657,6 +660,8 @@ rm -f *.da *.bb *.bbg gmon.out rm -rf quota2a quota2b quota2c rm -rf tsrc target_source rm -f testloadext.dll libtestloadext.so rm -f sqlite3.c fts?amal.c tclsqlite3.c + rm -f sqlite3rc.h + rm -f shell.c sqlite3ext.h rm -f $(SHPREFIX)sqlite3.$(SO) DELETED README Index: README ================================================================== --- README +++ README @@ -1,39 +0,0 @@ -This directory contains source code to - - SQLite: An Embeddable SQL Database Engine - -To compile the project, first create a directory in which to place -the build products. It is recommended, but not required, that the -build directory be separate from the source directory. Cd into the -build directory and then from the build directory run the configure -script found at the root of the source tree. Then run "make". - -For example: - - tar xzf sqlite.tar.gz ;# Unpack the source tree into "sqlite" - mkdir bld ;# Build will occur in a sibling directory - cd bld ;# Change to the build directory - ../sqlite/configure ;# Run the configure script - make ;# Run the makefile. - make install ;# (Optional) Install the build products - -The configure script uses autoconf 2.61 and libtool. If the configure -script does not work out for you, there is a generic makefile named -"Makefile.linux-gcc" in the top directory of the source tree that you -can copy and edit to suit your needs. Comments on the generic makefile -show what changes are needed. - -The linux binaries on the website are created using the generic makefile, -not the configure script. The windows binaries on the website are created -using MinGW32 configured as a cross-compiler running under Linux. For -details, see the ./publish.sh script at the top-level of the source tree. -The developers do not use teh configure script. - -SQLite does not require TCL to run, but a TCL installation is required -by the makefiles. SQLite contains a lot of generated code and TCL is -used to do much of that code generation. The makefile also requires -AWK. - -Contacts: - - http://www.sqlite.org/ ADDED README.md Index: README.md ================================================================== --- README.md +++ README.md @@ -0,0 +1,215 @@ +

SQLite Source Repository

+ +This repository contains the complete source code for the SQLite database +engine. Some test scripts are also include. However, many other test scripts +and most of the documentation are managed separately. + +## Compiling + +First create a directory in which to place +the build products. It is recommended, but not required, that the +build directory be separate from the source directory. Cd into the +build directory and then from the build directory run the configure +script found at the root of the source tree. Then run "make". + +For example: + + tar xzf sqlite.tar.gz ;# Unpack the source tree into "sqlite" + mkdir bld ;# Build will occur in a sibling directory + cd bld ;# Change to the build directory + ../sqlite/configure ;# Run the configure script + make ;# Run the makefile. + make sqlite3.c ;# Build the "amalgamation" source file + make test ;# Run some tests (requires Tcl) + +See the makefile for additional targets. + +The configure script uses autoconf 2.61 and libtool. If the configure +script does not work out for you, there is a generic makefile named +"Makefile.linux-gcc" in the top directory of the source tree that you +can copy and edit to suit your needs. Comments on the generic makefile +show what changes are needed. + +## Using MSVC + +On Windows, all applicable build products can be compiled with MSVC. +First open the command prompt window associated with the desired compiler +version (e.g. "Developer Command Prompt for VS2013"). Next, use NMAKE +with the provided "Makefile.msc" to build one of the supported targets. + +For example: + + mkdir bld + cd bld + nmake /f Makefile.msc TOP=..\sqlite + nmake /f Makefile.msc sqlite3.c TOP=..\sqlite + nmake /f Makefile.msc sqlite3.dll TOP=..\sqlite + nmake /f Makefile.msc sqlite3.exe TOP=..\sqlite + nmake /f Makefile.msc test TOP=..\sqlite + +There are several build options that can be set via the NMAKE command +line. For example, to build for WinRT, simply add "FOR_WINRT=1" argument +to the "sqlite3.dll" command line above. When debugging into the SQLite +code, adding the "DEBUG=1" argument to one of the above command lines is +recommended. + +SQLite does not require Tcl to run, but a Tcl installation is required +by the makefiles (including those for MSVC). SQLite contains a lot of +generated code and Tcl is used to do much of that code generation. The +makefiles also require AWK. + +## Source Code Tour + +Most of the core source files are in the **src/** subdirectory. But +src/ also contains files used to build the "testfixture" test harness; +those file all begin with "test". And src/ contains the "shell.c" file +which is the main program for the "sqlite3.exe" command-line shell and +the "tclsqlite.c" file which implements the bindings to SQLite from the +Tcl programming language. (Historical note: SQLite began as a Tcl +extension and only later escaped to the wild as an independent library.) + +Test scripts and programs are found in the **test/** subdirectory. +There are other test suites for SQLite (see +[How SQLite Is Tested](http://www.sqlite.org/testing.html)) +but those other test suites are +in separate source repositories. + +The **ext/** subdirectory contains code for extensions. The +Full-text search engine is in **ext/fts3**. The R-Tree engine is in +**ext/rtree**. The **ext/misc** subdirectory contains a number of +smaller, single-file extensions, such as a REGEXP operator. + +The **tool/** subdirectory contains various scripts and programs used +for building generated source code files or for testing or for generating +accessory programs such as "sqlite3_analyzer(.exe)". + +### Generated Source Code Files + +Several of the C-language source files used by SQLite are generated from +other sources rather than being typed in manually by a programmer. This +section will summarize those automatically-generated files. To create all +of the automatically-generated files, simply run "make target_source". +The "target_source" make target will create a subdirectory "tsrc/" and +fill it with all the source files needed to build SQLite, both +manually-edited files and automatically-generated files. + +The SQLite interface is defined by the **sqlite3.h** header file, which is +generated from src/sqlite.h.in, ./manifest.uuid, and ./VERSION. The +Tcl script at tool/mksqlite3h.tcl does the conversion. The manifest.uuid +file contains the SHA1 hash of the particular check-in and is used to generate +the SQLITE_SOURCE_ID macro. The VERSION file contains the current SQLite +version number. The sqlite3.h header is really just a copy of src/sqlite.h.in +with the source-id and version number inserted at just the right spots. +Note that comment text in the sqlite3.h file is used to generate much of +the SQLite API documentation. The Tcl scripts used to generate that +documentation are in a separate source repository. + +The SQL language parser is **parse.c** which is generate from a grammar in +the src/parse.y file. The conversion of "parse.y" into "parse.c" is done +by the [lemon](./doc/lemon.html) LALR(1) parser generator. The source code +for lemon is at tool/lemon.c. Lemon uses a +template for generating its parser. A generic template is in tool/lempar.c, +but SQLite uses a slightly modified template found in src/lempar.c. + +Lemon also generates the **parse.h** header file, at the same time it +generates parse.c. But the parse.h header file is +modified further (to add additional symbols) using the ./addopcodes.awk +AWK script. + +The **opcodes.h** header file contains macros that define the numbers +corresponding to opcodes in the "VDBE" virtual machine. The opcodes.h +file is generated by the scanning the src/vdbe.c source file. The +AWK script at ./mkopcodeh.awk does this scan and generates opcodes.h. +A second AWK script, ./mkopcodec.awk, then scans opcodes.h to generate +the **opcodes.c** source file, which contains a reverse mapping from +opcode-number to opcode-name that is used for EXPLAIN output. + +The **keywordhash.h** header file contains the definition of a hash table +that maps SQL language keywords (ex: "CREATE", "SELECT", "INDEX", etc.) into +the numeric codes used by the parse.c parser. The keywordhash.h file is +generated by a C-language program at tool mkkeywordhash.c. + +### The Amalgamation + +All of the individual C source code and header files (both manually-edited +and automatically-generated) can be combined into a single big source file +**sqlite3.c** called "the amalgamation". The amalgamation is the recommended +way of using SQLite in a larger application. Combining all individual +source code files into a single big source code file allows the C compiler +to perform more cross-procedure analysis and generate better code. SQLite +runs about 5% faster when compiled from the amalgamation versus when compiled +from individual source files. + +The amalgamation is generated from the tool/mksqlite3c.tcl Tcl script. +First, all of the individual source files must be gathered into the tsrc/ +subdirectory (using the equivalent of "make target_source") then the +tool/mksqlite3c.tcl script is run to copy them all together in just the +right order while resolving internal "#include" references. + +The amalgamation source file is more than 100K lines long. Some symbolic +debuggers (most notably MSVC) are unable to deal with files longer than 64K +lines. To work around this, a separate Tcl script, tool/split-sqlite3c.tcl, +can be run on the amalgamation to break it up into a single small C file +called **sqlite3-all.c** that does #include on about five other files +named **sqlite3-1.c**, **sqlite3-2.c**, ..., **sqlite3-5.c**. In this way, +all of the source code is contained within a single translation unit so +that the compiler can do extra cross-procedure optimization, but no +individual source file exceeds 32K lines in length. + +## How It All Fits Together + +SQLite is modular in design. +See the [architectural description](http://www.sqlite.org/arch.html) +for details. Other documents that are useful in +(helping to understand how SQLite works include the +[file format](http://www.sqlite.org/fileformat2.html) description, +the [virtual machine](http://www.sqlite.org/vdbe.html) that runs +prepared statements, the description of +[how transactions work](http://www.sqlite.org/atomiccommit.html), and +the [overview of the query planner](http://www.sqlite.org/optoverview.html). + +Unfortunately, years of effort have gone into optimizating SQLite, both +for small size and high performance. And optimizations tend to result in +complex code. So there is a lot of complexity in the SQLite implementation. + +Key files: + + * **sqlite3.h** - This file defines the public interface to the SQLite + library. Readers will need to be familiar with this interface before + trying to understand how the library works internally. + + * **sqliteInt.h** - this header file defines many of the data objects + used internally by SQLite. + + * **parse.y** - This file describes the LALR(1) grammer that SQLite uses + to parse SQL statements, and the actions that are taken at each stop + in the parsing process. + + * **vdbe.c** - This file implements the virtual machine that runs + prepared statements. There are various helper files whose names + begin with "vdbe". The VDBE has access to the vdbeInt.h header file + which defines internal data objects. The rest of SQLite interacts + with the VDBE through an interface defined by vdbe.h. + + * **where.c** - This file analyzes the WHERE clause and generates + virtual machine code to run queries efficiently. This file is + sometimes called the "query optimizer". It has its own private + header file, whereInt.h, that defines data objects used internally. + + * **btree.c** - This file contains the implementation of the B-Tree + storage engine used by SQLite. + + * **pager.c** - This file contains the "pager" implementation, the + module that implements transactions. + + * **os_unix.c** and **os_win.c** - These two files implement the interface + between SQLite and the underlying operating system using the run-time + pluggable VFS interface. + + +## Contacts + +The main SQLite webpage is [http://www.sqlite.org/](http://www.sqlite.org/) +with geographically distributed backup servers at +[http://www2.sqlite.org/](http://www2.sqlite.org) and +[http://www3.sqlite.org/](http://www3.sqlite.org). Index: VERSION ================================================================== --- VERSION +++ VERSION @@ -1,1 +1,1 @@ -3.7.14 +3.8.4.1 Index: addopcodes.awk ================================================================== --- addopcodes.awk +++ addopcodes.awk @@ -26,9 +26,9 @@ printf "#define TK_%-29s %4d\n", "UNCLOSED_STRING", ++max printf "#define TK_%-29s %4d\n", "FUNCTION", ++max printf "#define TK_%-29s %4d\n", "COLUMN", ++max printf "#define TK_%-29s %4d\n", "AGG_FUNCTION", ++max printf "#define TK_%-29s %4d\n", "AGG_COLUMN", ++max - printf "#define TK_%-29s %4d\n", "CONST_FUNC", ++max printf "#define TK_%-29s %4d\n", "UMINUS", ++max printf "#define TK_%-29s %4d\n", "UPLUS", ++max + printf "#define TK_%-29s %4d\n", "REGISTER", ++max } ADDED autoconf/INSTALL Index: autoconf/INSTALL ================================================================== --- autoconf/INSTALL +++ autoconf/INSTALL @@ -0,0 +1,370 @@ +Installation Instructions +************************* + +Copyright (C) 1994-1996, 1999-2002, 2004-2011 Free Software Foundation, +Inc. + + Copying and distribution of this file, with or without modification, +are permitted in any medium without royalty provided the copyright +notice and this notice are preserved. This file is offered as-is, +without warranty of any kind. + +Basic Installation +================== + + Briefly, the shell commands `./configure; make; make install' should +configure, build, and install this package. The following +more-detailed instructions are generic; see the `README' file for +instructions specific to this package. Some packages provide this +`INSTALL' file but do not implement all of the features documented +below. The lack of an optional feature in a given package is not +necessarily a bug. More recommendations for GNU packages can be found +in *note Makefile Conventions: (standards)Makefile Conventions. + + The `configure' shell script attempts to guess correct values for +various system-dependent variables used during compilation. It uses +those values to create a `Makefile' in each directory of the package. +It may also create one or more `.h' files containing system-dependent +definitions. Finally, it creates a shell script `config.status' that +you can run in the future to recreate the current configuration, and a +file `config.log' containing compiler output (useful mainly for +debugging `configure'). + + It can also use an optional file (typically called `config.cache' +and enabled with `--cache-file=config.cache' or simply `-C') that saves +the results of its tests to speed up reconfiguring. Caching is +disabled by default to prevent problems with accidental use of stale +cache files. + + If you need to do unusual things to compile the package, please try +to figure out how `configure' could check whether to do them, and mail +diffs or instructions to the address given in the `README' so they can +be considered for the next release. If you are using the cache, and at +some point `config.cache' contains results you don't want to keep, you +may remove or edit it. + + The file `configure.ac' (or `configure.in') is used to create +`configure' by a program called `autoconf'. You need `configure.ac' if +you want to change it or regenerate `configure' using a newer version +of `autoconf'. + + The simplest way to compile this package is: + + 1. `cd' to the directory containing the package's source code and type + `./configure' to configure the package for your system. + + Running `configure' might take a while. While running, it prints + some messages telling which features it is checking for. + + 2. Type `make' to compile the package. + + 3. Optionally, type `make check' to run any self-tests that come with + the package, generally using the just-built uninstalled binaries. + + 4. Type `make install' to install the programs and any data files and + documentation. When installing into a prefix owned by root, it is + recommended that the package be configured and built as a regular + user, and only the `make install' phase executed with root + privileges. + + 5. Optionally, type `make installcheck' to repeat any self-tests, but + this time using the binaries in their final installed location. + This target does not install anything. Running this target as a + regular user, particularly if the prior `make install' required + root privileges, verifies that the installation completed + correctly. + + 6. You can remove the program binaries and object files from the + source code directory by typing `make clean'. To also remove the + files that `configure' created (so you can compile the package for + a different kind of computer), type `make distclean'. There is + also a `make maintainer-clean' target, but that is intended mainly + for the package's developers. If you use it, you may have to get + all sorts of other programs in order to regenerate files that came + with the distribution. + + 7. Often, you can also type `make uninstall' to remove the installed + files again. In practice, not all packages have tested that + uninstallation works correctly, even though it is required by the + GNU Coding Standards. + + 8. Some packages, particularly those that use Automake, provide `make + distcheck', which can by used by developers to test that all other + targets like `make install' and `make uninstall' work correctly. + This target is generally not run by end users. + +Compilers and Options +===================== + + Some systems require unusual options for compilation or linking that +the `configure' script does not know about. Run `./configure --help' +for details on some of the pertinent environment variables. + + You can give `configure' initial values for configuration parameters +by setting variables in the command line or in the environment. Here +is an example: + + ./configure CC=c99 CFLAGS=-g LIBS=-lposix + + *Note Defining Variables::, for more details. + +Compiling For Multiple Architectures +==================================== + + You can compile the package for more than one kind of computer at the +same time, by placing the object files for each architecture in their +own directory. To do this, you can use GNU `make'. `cd' to the +directory where you want the object files and executables to go and run +the `configure' script. `configure' automatically checks for the +source code in the directory that `configure' is in and in `..'. This +is known as a "VPATH" build. + + With a non-GNU `make', it is safer to compile the package for one +architecture at a time in the source code directory. After you have +installed the package for one architecture, use `make distclean' before +reconfiguring for another architecture. + + On MacOS X 10.5 and later systems, you can create libraries and +executables that work on multiple system types--known as "fat" or +"universal" binaries--by specifying multiple `-arch' options to the +compiler but only a single `-arch' option to the preprocessor. Like +this: + + ./configure CC="gcc -arch i386 -arch x86_64 -arch ppc -arch ppc64" \ + CXX="g++ -arch i386 -arch x86_64 -arch ppc -arch ppc64" \ + CPP="gcc -E" CXXCPP="g++ -E" + + This is not guaranteed to produce working output in all cases, you +may have to build one architecture at a time and combine the results +using the `lipo' tool if you have problems. + +Installation Names +================== + + By default, `make install' installs the package's commands under +`/usr/local/bin', include files under `/usr/local/include', etc. You +can specify an installation prefix other than `/usr/local' by giving +`configure' the option `--prefix=PREFIX', where PREFIX must be an +absolute file name. + + You can specify separate installation prefixes for +architecture-specific files and architecture-independent files. If you +pass the option `--exec-prefix=PREFIX' to `configure', the package uses +PREFIX as the prefix for installing programs and libraries. +Documentation and other data files still use the regular prefix. + + In addition, if you use an unusual directory layout you can give +options like `--bindir=DIR' to specify different values for particular +kinds of files. Run `configure --help' for a list of the directories +you can set and what kinds of files go in them. In general, the +default for these options is expressed in terms of `${prefix}', so that +specifying just `--prefix' will affect all of the other directory +specifications that were not explicitly provided. + + The most portable way to affect installation locations is to pass the +correct locations to `configure'; however, many packages provide one or +both of the following shortcuts of passing variable assignments to the +`make install' command line to change installation locations without +having to reconfigure or recompile. + + The first method involves providing an override variable for each +affected directory. For example, `make install +prefix=/alternate/directory' will choose an alternate location for all +directory configuration variables that were expressed in terms of +`${prefix}'. Any directories that were specified during `configure', +but not in terms of `${prefix}', must each be overridden at install +time for the entire installation to be relocated. The approach of +makefile variable overrides for each directory variable is required by +the GNU Coding Standards, and ideally causes no recompilation. +However, some platforms have known limitations with the semantics of +shared libraries that end up requiring recompilation when using this +method, particularly noticeable in packages that use GNU Libtool. + + The second method involves providing the `DESTDIR' variable. For +example, `make install DESTDIR=/alternate/directory' will prepend +`/alternate/directory' before all installation names. The approach of +`DESTDIR' overrides is not required by the GNU Coding Standards, and +does not work on platforms that have drive letters. On the other hand, +it does better at avoiding recompilation issues, and works well even +when some directory options were not specified in terms of `${prefix}' +at `configure' time. + +Optional Features +================= + + If the package supports it, you can cause programs to be installed +with an extra prefix or suffix on their names by giving `configure' the +option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'. + + Some packages pay attention to `--enable-FEATURE' options to +`configure', where FEATURE indicates an optional part of the package. +They may also pay attention to `--with-PACKAGE' options, where PACKAGE +is something like `gnu-as' or `x' (for the X Window System). The +`README' should mention any `--enable-' and `--with-' options that the +package recognizes. + + For packages that use the X Window System, `configure' can usually +find the X include and library files automatically, but if it doesn't, +you can use the `configure' options `--x-includes=DIR' and +`--x-libraries=DIR' to specify their locations. + + Some packages offer the ability to configure how verbose the +execution of `make' will be. For these packages, running `./configure +--enable-silent-rules' sets the default to minimal output, which can be +overridden with `make V=1'; while running `./configure +--disable-silent-rules' sets the default to verbose, which can be +overridden with `make V=0'. + +Particular systems +================== + + On HP-UX, the default C compiler is not ANSI C compatible. If GNU +CC is not installed, it is recommended to use the following options in +order to use an ANSI C compiler: + + ./configure CC="cc -Ae -D_XOPEN_SOURCE=500" + +and if that doesn't work, install pre-built binaries of GCC for HP-UX. + + HP-UX `make' updates targets which have the same time stamps as +their prerequisites, which makes it generally unusable when shipped +generated files such as `configure' are involved. Use GNU `make' +instead. + + On OSF/1 a.k.a. Tru64, some versions of the default C compiler cannot +parse its `' header file. The option `-nodtk' can be used as +a workaround. If GNU CC is not installed, it is therefore recommended +to try + + ./configure CC="cc" + +and if that doesn't work, try + + ./configure CC="cc -nodtk" + + On Solaris, don't put `/usr/ucb' early in your `PATH'. This +directory contains several dysfunctional programs; working variants of +these programs are available in `/usr/bin'. So, if you need `/usr/ucb' +in your `PATH', put it _after_ `/usr/bin'. + + On Haiku, software installed for all users goes in `/boot/common', +not `/usr/local'. It is recommended to use the following options: + + ./configure --prefix=/boot/common + +Specifying the System Type +========================== + + There may be some features `configure' cannot figure out +automatically, but needs to determine by the type of machine the package +will run on. Usually, assuming the package is built to be run on the +_same_ architectures, `configure' can figure that out, but if it prints +a message saying it cannot guess the machine type, give it the +`--build=TYPE' option. TYPE can either be a short name for the system +type, such as `sun4', or a canonical name which has the form: + + CPU-COMPANY-SYSTEM + +where SYSTEM can have one of these forms: + + OS + KERNEL-OS + + See the file `config.sub' for the possible values of each field. If +`config.sub' isn't included in this package, then this package doesn't +need to know the machine type. + + If you are _building_ compiler tools for cross-compiling, you should +use the option `--target=TYPE' to select the type of system they will +produce code for. + + If you want to _use_ a cross compiler, that generates code for a +platform different from the build platform, you should specify the +"host" platform (i.e., that on which the generated programs will +eventually be run) with `--host=TYPE'. + +Sharing Defaults +================ + + If you want to set default values for `configure' scripts to share, +you can create a site shell script called `config.site' that gives +default values for variables like `CC', `cache_file', and `prefix'. +`configure' looks for `PREFIX/share/config.site' if it exists, then +`PREFIX/etc/config.site' if it exists. Or, you can set the +`CONFIG_SITE' environment variable to the location of the site script. +A warning: not all `configure' scripts look for a site script. + +Defining Variables +================== + + Variables not defined in a site shell script can be set in the +environment passed to `configure'. However, some packages may run +configure again during the build, and the customized values of these +variables may be lost. In order to avoid this problem, you should set +them in the `configure' command line, using `VAR=value'. For example: + + ./configure CC=/usr/local2/bin/gcc + +causes the specified `gcc' to be used as the C compiler (unless it is +overridden in the site shell script). + +Unfortunately, this technique does not work for `CONFIG_SHELL' due to +an Autoconf bug. Until the bug is fixed you can use this workaround: + + CONFIG_SHELL=/bin/bash /bin/bash ./configure CONFIG_SHELL=/bin/bash + +`configure' Invocation +====================== + + `configure' recognizes the following options to control how it +operates. + +`--help' +`-h' + Print a summary of all of the options to `configure', and exit. + +`--help=short' +`--help=recursive' + Print a summary of the options unique to this package's + `configure', and exit. The `short' variant lists options used + only in the top level, while the `recursive' variant lists options + also present in any nested packages. + +`--version' +`-V' + Print the version of Autoconf used to generate the `configure' + script, and exit. + +`--cache-file=FILE' + Enable the cache: use and save the results of the tests in FILE, + traditionally `config.cache'. FILE defaults to `/dev/null' to + disable caching. + +`--config-cache' +`-C' + Alias for `--cache-file=config.cache'. + +`--quiet' +`--silent' +`-q' + Do not print messages saying which checks are being made. To + suppress all normal output, redirect it to `/dev/null' (any error + messages will still be shown). + +`--srcdir=DIR' + Look for the package's source code in directory DIR. Usually + `configure' can determine that directory automatically. + +`--prefix=DIR' + Use DIR as the installation prefix. *note Installation Names:: + for more details, including other options available for fine-tuning + the installation locations. + +`--no-create' +`-n' + Run the configure checks, but stop before creating any output + files. + +`configure' also accepts some other, not widely useful, options. Run +`configure --help' for more details. + ADDED autoconf/Makefile.am Index: autoconf/Makefile.am ================================================================== --- autoconf/Makefile.am +++ autoconf/Makefile.am @@ -0,0 +1,19 @@ + +AM_CFLAGS = @THREADSAFE_FLAGS@ @DYNAMIC_EXTENSION_FLAGS@ -DSQLITE_ENABLE_FTS3 -DSQLITE_ENABLE_RTREE + +lib_LTLIBRARIES = libsqlite3.la +libsqlite3_la_SOURCES = sqlite3.c +libsqlite3_la_LDFLAGS = -no-undefined -version-info 8:6:8 + +bin_PROGRAMS = sqlite3 +sqlite3_SOURCES = shell.c sqlite3.h +sqlite3_LDADD = $(top_builddir)/libsqlite3.la @READLINE_LIBS@ +sqlite3_DEPENDENCIES = $(top_builddir)/libsqlite3.la + +include_HEADERS = sqlite3.h sqlite3ext.h + +EXTRA_DIST = sqlite3.1 tea +pkgconfigdir = ${libdir}/pkgconfig +pkgconfig_DATA = sqlite3.pc + +man_MANS = sqlite3.1 ADDED autoconf/README Index: autoconf/README ================================================================== --- autoconf/README +++ autoconf/README @@ -0,0 +1,32 @@ + +This package contains: + + * the SQLite library amalgamation (single file) source code distribution, + * the shell.c file used to build the sqlite3 shell too, and + * the sqlite3.h and sqlite3ext.h header files required to link programs + and sqlite extensions against the installed libary. + * autoconf/automake installation infrastucture. + +The generic installation instructions for autoconf/automake are found +in the INSTALL file. + +The following SQLite specific boolean options are supported: + + --enable-readline use readline in shell tool [default=yes] + --enable-threadsafe build a thread-safe library [default=yes] + --enable-dynamic-extensions support loadable extensions [default=yes] + +The default value for the CFLAGS variable (options passed to the C +compiler) includes debugging symbols in the build, resulting in larger +binaries than are necessary. Override it on the configure command +line like this: + + $ CFLAGS="-Os" ./configure + +to produce a smaller installation footprint. + +Other SQLite compilation parameters can also be set using CFLAGS. For +example: + + $ CFLAGS="-Os -DSQLITE_OMIT_TRIGGERS" ./configure + ADDED autoconf/README.first Index: autoconf/README.first ================================================================== --- autoconf/README.first +++ autoconf/README.first @@ -0,0 +1,57 @@ + +This file describes how to use the files in this directory to create a new +version of the "autoconf-amalgamation" package. + +1. The following files should have executable permission: + + chmod 755 install-sh + chmod 755 missing + chmod 755 depcomp + chmod 755 config.sub + chmod 755 config.guess + +2. Copy new versions of the following SQLite files into this directory: + + sqlite3.c + sqlite3.h + sqlite3ext.h + sqlite3.1 + sqlite3.pc.in + shell.c + +3. Update the SQLite version number in the AC_INIT macro in file + configure.ac: + + AC_INIT(sqlite, 3.6.3, http://www.sqlite.org) + +4. Run the following commands to push the version number change through + to the generated files. + + aclocal + autoconf + automake + +5. Create the tclsqlite3.c file in the tea/generic directory. As follows: + + mkdir -p tea/generic + echo "#ifdef USE_SYSTEM_SQLITE" > tea/generic/tclsqlite3.c + echo "# include " >> tea/generic/tclsqlite3.c + echo "#else" >> tea/generic/tclsqlite3.c + echo "#include \"../../sqlite3.c\"" >> tea/generic/tclsqlite3.c + echo "#endif" >> tea/generic/tclsqlite3.c + cat ../src/tclsqlite.c >> tea/generic/tclsqlite3.c + +6. Update the SQLite version in the AC_INIT macro in file tea/configure.in: + + AC_INIT([sqlite], [3.6.3]) + +7. From the 'tea' directory, run the following commands: + + autoconf + rm -rf autom4te.cache + +8. Run "./configure && make dist". This builds a distribution package + named something like "sqlite-3.6.3.tar.gz". Rename to + "sqlite-amalgamation-3.6.3.tar.gz" and use. + + ADDED autoconf/config.guess Index: autoconf/config.guess ================================================================== --- autoconf/config.guess +++ autoconf/config.guess @@ -0,0 +1,1530 @@ +#! /bin/sh +# Attempt to guess a canonical system name. +# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, +# 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, +# 2011, 2012 Free Software Foundation, Inc. + +timestamp='2012-02-10' + +# This file is free software; you can redistribute it and/or modify it +# under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, see . +# +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + + +# Originally written by Per Bothner. Please send patches (context +# diff format) to and include a ChangeLog +# entry. +# +# This script attempts to guess a canonical system name similar to +# config.sub. If it succeeds, it prints the system name on stdout, and +# exits with 0. Otherwise, it exits with 1. +# +# You can get the latest version of this script from: +# http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess;hb=HEAD + +me=`echo "$0" | sed -e 's,.*/,,'` + +usage="\ +Usage: $0 [OPTION] + +Output the configuration name of the system \`$me' is run on. + +Operation modes: + -h, --help print this help, then exit + -t, --time-stamp print date of last modification, then exit + -v, --version print version number, then exit + +Report bugs and patches to ." + +version="\ +GNU config.guess ($timestamp) + +Originally written by Per Bothner. +Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, +2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012 +Free Software Foundation, Inc. + +This is free software; see the source for copying conditions. There is NO +warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." + +help=" +Try \`$me --help' for more information." + +# Parse command line +while test $# -gt 0 ; do + case $1 in + --time-stamp | --time* | -t ) + echo "$timestamp" ; exit ;; + --version | -v ) + echo "$version" ; exit ;; + --help | --h* | -h ) + echo "$usage"; exit ;; + -- ) # Stop option processing + shift; break ;; + - ) # Use stdin as input. + break ;; + -* ) + echo "$me: invalid option $1$help" >&2 + exit 1 ;; + * ) + break ;; + esac +done + +if test $# != 0; then + echo "$me: too many arguments$help" >&2 + exit 1 +fi + +trap 'exit 1' 1 2 15 + +# CC_FOR_BUILD -- compiler used by this script. Note that the use of a +# compiler to aid in system detection is discouraged as it requires +# temporary files to be created and, as you can see below, it is a +# headache to deal with in a portable fashion. + +# Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still +# use `HOST_CC' if defined, but it is deprecated. + +# Portable tmp directory creation inspired by the Autoconf team. + +set_cc_for_build=' +trap "exitcode=\$?; (rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null) && exit \$exitcode" 0 ; +trap "rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null; exit 1" 1 2 13 15 ; +: ${TMPDIR=/tmp} ; + { tmp=`(umask 077 && mktemp -d "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } || + { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir $tmp) ; } || + { tmp=$TMPDIR/cg-$$ && (umask 077 && mkdir $tmp) && echo "Warning: creating insecure temp directory" >&2 ; } || + { echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; } ; +dummy=$tmp/dummy ; +tmpfiles="$dummy.c $dummy.o $dummy.rel $dummy" ; +case $CC_FOR_BUILD,$HOST_CC,$CC in + ,,) echo "int x;" > $dummy.c ; + for c in cc gcc c89 c99 ; do + if ($c -c -o $dummy.o $dummy.c) >/dev/null 2>&1 ; then + CC_FOR_BUILD="$c"; break ; + fi ; + done ; + if test x"$CC_FOR_BUILD" = x ; then + CC_FOR_BUILD=no_compiler_found ; + fi + ;; + ,,*) CC_FOR_BUILD=$CC ;; + ,*,*) CC_FOR_BUILD=$HOST_CC ;; +esac ; set_cc_for_build= ;' + +# This is needed to find uname on a Pyramid OSx when run in the BSD universe. +# (ghazi@noc.rutgers.edu 1994-08-24) +if (test -f /.attbin/uname) >/dev/null 2>&1 ; then + PATH=$PATH:/.attbin ; export PATH +fi + +UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown +UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown +UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown +UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown + +# Note: order is significant - the case branches are not exclusive. + +case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in + *:NetBSD:*:*) + # NetBSD (nbsd) targets should (where applicable) match one or + # more of the tuples: *-*-netbsdelf*, *-*-netbsdaout*, + # *-*-netbsdecoff* and *-*-netbsd*. For targets that recently + # switched to ELF, *-*-netbsd* would select the old + # object file format. This provides both forward + # compatibility and a consistent mechanism for selecting the + # object file format. + # + # Note: NetBSD doesn't particularly care about the vendor + # portion of the name. We always set it to "unknown". + sysctl="sysctl -n hw.machine_arch" + UNAME_MACHINE_ARCH=`(/sbin/$sysctl 2>/dev/null || \ + /usr/sbin/$sysctl 2>/dev/null || echo unknown)` + case "${UNAME_MACHINE_ARCH}" in + armeb) machine=armeb-unknown ;; + arm*) machine=arm-unknown ;; + sh3el) machine=shl-unknown ;; + sh3eb) machine=sh-unknown ;; + sh5el) machine=sh5le-unknown ;; + *) machine=${UNAME_MACHINE_ARCH}-unknown ;; + esac + # The Operating System including object format, if it has switched + # to ELF recently, or will in the future. + case "${UNAME_MACHINE_ARCH}" in + arm*|i386|m68k|ns32k|sh3*|sparc|vax) + eval $set_cc_for_build + if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \ + | grep -q __ELF__ + then + # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout). + # Return netbsd for either. FIX? + os=netbsd + else + os=netbsdelf + fi + ;; + *) + os=netbsd + ;; + esac + # The OS release + # Debian GNU/NetBSD machines have a different userland, and + # thus, need a distinct triplet. However, they do not need + # kernel version information, so it can be replaced with a + # suitable tag, in the style of linux-gnu. + case "${UNAME_VERSION}" in + Debian*) + release='-gnu' + ;; + *) + release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'` + ;; + esac + # Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM: + # contains redundant information, the shorter form: + # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used. + echo "${machine}-${os}${release}" + exit ;; + *:OpenBSD:*:*) + UNAME_MACHINE_ARCH=`arch | sed 's/OpenBSD.//'` + echo ${UNAME_MACHINE_ARCH}-unknown-openbsd${UNAME_RELEASE} + exit ;; + *:ekkoBSD:*:*) + echo ${UNAME_MACHINE}-unknown-ekkobsd${UNAME_RELEASE} + exit ;; + *:SolidBSD:*:*) + echo ${UNAME_MACHINE}-unknown-solidbsd${UNAME_RELEASE} + exit ;; + macppc:MirBSD:*:*) + echo powerpc-unknown-mirbsd${UNAME_RELEASE} + exit ;; + *:MirBSD:*:*) + echo ${UNAME_MACHINE}-unknown-mirbsd${UNAME_RELEASE} + exit ;; + alpha:OSF1:*:*) + case $UNAME_RELEASE in + *4.0) + UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'` + ;; + *5.*) + UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $4}'` + ;; + esac + # According to Compaq, /usr/sbin/psrinfo has been available on + # OSF/1 and Tru64 systems produced since 1995. I hope that + # covers most systems running today. This code pipes the CPU + # types through head -n 1, so we only detect the type of CPU 0. + ALPHA_CPU_TYPE=`/usr/sbin/psrinfo -v | sed -n -e 's/^ The alpha \(.*\) processor.*$/\1/p' | head -n 1` + case "$ALPHA_CPU_TYPE" in + "EV4 (21064)") + UNAME_MACHINE="alpha" ;; + "EV4.5 (21064)") + UNAME_MACHINE="alpha" ;; + "LCA4 (21066/21068)") + UNAME_MACHINE="alpha" ;; + "EV5 (21164)") + UNAME_MACHINE="alphaev5" ;; + "EV5.6 (21164A)") + UNAME_MACHINE="alphaev56" ;; + "EV5.6 (21164PC)") + UNAME_MACHINE="alphapca56" ;; + "EV5.7 (21164PC)") + UNAME_MACHINE="alphapca57" ;; + "EV6 (21264)") + UNAME_MACHINE="alphaev6" ;; + "EV6.7 (21264A)") + UNAME_MACHINE="alphaev67" ;; + "EV6.8CB (21264C)") + UNAME_MACHINE="alphaev68" ;; + "EV6.8AL (21264B)") + UNAME_MACHINE="alphaev68" ;; + "EV6.8CX (21264D)") + UNAME_MACHINE="alphaev68" ;; + "EV6.9A (21264/EV69A)") + UNAME_MACHINE="alphaev69" ;; + "EV7 (21364)") + UNAME_MACHINE="alphaev7" ;; + "EV7.9 (21364A)") + UNAME_MACHINE="alphaev79" ;; + esac + # A Pn.n version is a patched version. + # A Vn.n version is a released version. + # A Tn.n version is a released field test version. + # A Xn.n version is an unreleased experimental baselevel. + # 1.2 uses "1.2" for uname -r. + echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[PVTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'` + # Reset EXIT trap before exiting to avoid spurious non-zero exit code. + exitcode=$? + trap '' 0 + exit $exitcode ;; + Alpha\ *:Windows_NT*:*) + # How do we know it's Interix rather than the generic POSIX subsystem? + # Should we change UNAME_MACHINE based on the output of uname instead + # of the specific Alpha model? + echo alpha-pc-interix + exit ;; + 21064:Windows_NT:50:3) + echo alpha-dec-winnt3.5 + exit ;; + Amiga*:UNIX_System_V:4.0:*) + echo m68k-unknown-sysv4 + exit ;; + *:[Aa]miga[Oo][Ss]:*:*) + echo ${UNAME_MACHINE}-unknown-amigaos + exit ;; + *:[Mm]orph[Oo][Ss]:*:*) + echo ${UNAME_MACHINE}-unknown-morphos + exit ;; + *:OS/390:*:*) + echo i370-ibm-openedition + exit ;; + *:z/VM:*:*) + echo s390-ibm-zvmoe + exit ;; + *:OS400:*:*) + echo powerpc-ibm-os400 + exit ;; + arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*) + echo arm-acorn-riscix${UNAME_RELEASE} + exit ;; + arm:riscos:*:*|arm:RISCOS:*:*) + echo arm-unknown-riscos + exit ;; + SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*) + echo hppa1.1-hitachi-hiuxmpp + exit ;; + Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*) + # akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE. + if test "`(/bin/universe) 2>/dev/null`" = att ; then + echo pyramid-pyramid-sysv3 + else + echo pyramid-pyramid-bsd + fi + exit ;; + NILE*:*:*:dcosx) + echo pyramid-pyramid-svr4 + exit ;; + DRS?6000:unix:4.0:6*) + echo sparc-icl-nx6 + exit ;; + DRS?6000:UNIX_SV:4.2*:7* | DRS?6000:isis:4.2*:7*) + case `/usr/bin/uname -p` in + sparc) echo sparc-icl-nx7; exit ;; + esac ;; + s390x:SunOS:*:*) + echo ${UNAME_MACHINE}-ibm-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit ;; + sun4H:SunOS:5.*:*) + echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit ;; + sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*) + echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit ;; + i86pc:AuroraUX:5.*:* | i86xen:AuroraUX:5.*:*) + echo i386-pc-auroraux${UNAME_RELEASE} + exit ;; + i86pc:SunOS:5.*:* | i86xen:SunOS:5.*:*) + eval $set_cc_for_build + SUN_ARCH="i386" + # If there is a compiler, see if it is configured for 64-bit objects. + # Note that the Sun cc does not turn __LP64__ into 1 like gcc does. + # This test works for both compilers. + if [ "$CC_FOR_BUILD" != 'no_compiler_found' ]; then + if (echo '#ifdef __amd64'; echo IS_64BIT_ARCH; echo '#endif') | \ + (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | \ + grep IS_64BIT_ARCH >/dev/null + then + SUN_ARCH="x86_64" + fi + fi + echo ${SUN_ARCH}-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit ;; + sun4*:SunOS:6*:*) + # According to config.sub, this is the proper way to canonicalize + # SunOS6. Hard to guess exactly what SunOS6 will be like, but + # it's likely to be more like Solaris than SunOS4. + echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit ;; + sun4*:SunOS:*:*) + case "`/usr/bin/arch -k`" in + Series*|S4*) + UNAME_RELEASE=`uname -v` + ;; + esac + # Japanese Language versions have a version number like `4.1.3-JL'. + echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'` + exit ;; + sun3*:SunOS:*:*) + echo m68k-sun-sunos${UNAME_RELEASE} + exit ;; + sun*:*:4.2BSD:*) + UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null` + test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3 + case "`/bin/arch`" in + sun3) + echo m68k-sun-sunos${UNAME_RELEASE} + ;; + sun4) + echo sparc-sun-sunos${UNAME_RELEASE} + ;; + esac + exit ;; + aushp:SunOS:*:*) + echo sparc-auspex-sunos${UNAME_RELEASE} + exit ;; + # The situation for MiNT is a little confusing. The machine name + # can be virtually everything (everything which is not + # "atarist" or "atariste" at least should have a processor + # > m68000). The system name ranges from "MiNT" over "FreeMiNT" + # to the lowercase version "mint" (or "freemint"). Finally + # the system name "TOS" denotes a system which is actually not + # MiNT. But MiNT is downward compatible to TOS, so this should + # be no problem. + atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*) + echo m68k-atari-mint${UNAME_RELEASE} + exit ;; + atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*) + echo m68k-atari-mint${UNAME_RELEASE} + exit ;; + *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*) + echo m68k-atari-mint${UNAME_RELEASE} + exit ;; + milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*) + echo m68k-milan-mint${UNAME_RELEASE} + exit ;; + hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*) + echo m68k-hades-mint${UNAME_RELEASE} + exit ;; + *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*) + echo m68k-unknown-mint${UNAME_RELEASE} + exit ;; + m68k:machten:*:*) + echo m68k-apple-machten${UNAME_RELEASE} + exit ;; + powerpc:machten:*:*) + echo powerpc-apple-machten${UNAME_RELEASE} + exit ;; + RISC*:Mach:*:*) + echo mips-dec-mach_bsd4.3 + exit ;; + RISC*:ULTRIX:*:*) + echo mips-dec-ultrix${UNAME_RELEASE} + exit ;; + VAX*:ULTRIX*:*:*) + echo vax-dec-ultrix${UNAME_RELEASE} + exit ;; + 2020:CLIX:*:* | 2430:CLIX:*:*) + echo clipper-intergraph-clix${UNAME_RELEASE} + exit ;; + mips:*:*:UMIPS | mips:*:*:RISCos) + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c +#ifdef __cplusplus +#include /* for printf() prototype */ + int main (int argc, char *argv[]) { +#else + int main (argc, argv) int argc; char *argv[]; { +#endif + #if defined (host_mips) && defined (MIPSEB) + #if defined (SYSTYPE_SYSV) + printf ("mips-mips-riscos%ssysv\n", argv[1]); exit (0); + #endif + #if defined (SYSTYPE_SVR4) + printf ("mips-mips-riscos%ssvr4\n", argv[1]); exit (0); + #endif + #if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD) + printf ("mips-mips-riscos%sbsd\n", argv[1]); exit (0); + #endif + #endif + exit (-1); + } +EOF + $CC_FOR_BUILD -o $dummy $dummy.c && + dummyarg=`echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` && + SYSTEM_NAME=`$dummy $dummyarg` && + { echo "$SYSTEM_NAME"; exit; } + echo mips-mips-riscos${UNAME_RELEASE} + exit ;; + Motorola:PowerMAX_OS:*:*) + echo powerpc-motorola-powermax + exit ;; + Motorola:*:4.3:PL8-*) + echo powerpc-harris-powermax + exit ;; + Night_Hawk:*:*:PowerMAX_OS | Synergy:PowerMAX_OS:*:*) + echo powerpc-harris-powermax + exit ;; + Night_Hawk:Power_UNIX:*:*) + echo powerpc-harris-powerunix + exit ;; + m88k:CX/UX:7*:*) + echo m88k-harris-cxux7 + exit ;; + m88k:*:4*:R4*) + echo m88k-motorola-sysv4 + exit ;; + m88k:*:3*:R3*) + echo m88k-motorola-sysv3 + exit ;; + AViiON:dgux:*:*) + # DG/UX returns AViiON for all architectures + UNAME_PROCESSOR=`/usr/bin/uname -p` + if [ $UNAME_PROCESSOR = mc88100 ] || [ $UNAME_PROCESSOR = mc88110 ] + then + if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx ] || \ + [ ${TARGET_BINARY_INTERFACE}x = x ] + then + echo m88k-dg-dgux${UNAME_RELEASE} + else + echo m88k-dg-dguxbcs${UNAME_RELEASE} + fi + else + echo i586-dg-dgux${UNAME_RELEASE} + fi + exit ;; + M88*:DolphinOS:*:*) # DolphinOS (SVR3) + echo m88k-dolphin-sysv3 + exit ;; + M88*:*:R3*:*) + # Delta 88k system running SVR3 + echo m88k-motorola-sysv3 + exit ;; + XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3) + echo m88k-tektronix-sysv3 + exit ;; + Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD) + echo m68k-tektronix-bsd + exit ;; + *:IRIX*:*:*) + echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'` + exit ;; + ????????:AIX?:[12].1:2) # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX. + echo romp-ibm-aix # uname -m gives an 8 hex-code CPU id + exit ;; # Note that: echo "'`uname -s`'" gives 'AIX ' + i*86:AIX:*:*) + echo i386-ibm-aix + exit ;; + ia64:AIX:*:*) + if [ -x /usr/bin/oslevel ] ; then + IBM_REV=`/usr/bin/oslevel` + else + IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE} + fi + echo ${UNAME_MACHINE}-ibm-aix${IBM_REV} + exit ;; + *:AIX:2:3) + if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + #include + + main() + { + if (!__power_pc()) + exit(1); + puts("powerpc-ibm-aix3.2.5"); + exit(0); + } +EOF + if $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` + then + echo "$SYSTEM_NAME" + else + echo rs6000-ibm-aix3.2.5 + fi + elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then + echo rs6000-ibm-aix3.2.4 + else + echo rs6000-ibm-aix3.2 + fi + exit ;; + *:AIX:*:[4567]) + IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'` + if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then + IBM_ARCH=rs6000 + else + IBM_ARCH=powerpc + fi + if [ -x /usr/bin/oslevel ] ; then + IBM_REV=`/usr/bin/oslevel` + else + IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE} + fi + echo ${IBM_ARCH}-ibm-aix${IBM_REV} + exit ;; + *:AIX:*:*) + echo rs6000-ibm-aix + exit ;; + ibmrt:4.4BSD:*|romp-ibm:BSD:*) + echo romp-ibm-bsd4.4 + exit ;; + ibmrt:*BSD:*|romp-ibm:BSD:*) # covers RT/PC BSD and + echo romp-ibm-bsd${UNAME_RELEASE} # 4.3 with uname added to + exit ;; # report: romp-ibm BSD 4.3 + *:BOSX:*:*) + echo rs6000-bull-bosx + exit ;; + DPX/2?00:B.O.S.:*:*) + echo m68k-bull-sysv3 + exit ;; + 9000/[34]??:4.3bsd:1.*:*) + echo m68k-hp-bsd + exit ;; + hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*) + echo m68k-hp-bsd4.4 + exit ;; + 9000/[34678]??:HP-UX:*:*) + HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` + case "${UNAME_MACHINE}" in + 9000/31? ) HP_ARCH=m68000 ;; + 9000/[34]?? ) HP_ARCH=m68k ;; + 9000/[678][0-9][0-9]) + if [ -x /usr/bin/getconf ]; then + sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null` + sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null` + case "${sc_cpu_version}" in + 523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0 + 528) HP_ARCH="hppa1.1" ;; # CPU_PA_RISC1_1 + 532) # CPU_PA_RISC2_0 + case "${sc_kernel_bits}" in + 32) HP_ARCH="hppa2.0n" ;; + 64) HP_ARCH="hppa2.0w" ;; + '') HP_ARCH="hppa2.0" ;; # HP-UX 10.20 + esac ;; + esac + fi + if [ "${HP_ARCH}" = "" ]; then + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + + #define _HPUX_SOURCE + #include + #include + + int main () + { + #if defined(_SC_KERNEL_BITS) + long bits = sysconf(_SC_KERNEL_BITS); + #endif + long cpu = sysconf (_SC_CPU_VERSION); + + switch (cpu) + { + case CPU_PA_RISC1_0: puts ("hppa1.0"); break; + case CPU_PA_RISC1_1: puts ("hppa1.1"); break; + case CPU_PA_RISC2_0: + #if defined(_SC_KERNEL_BITS) + switch (bits) + { + case 64: puts ("hppa2.0w"); break; + case 32: puts ("hppa2.0n"); break; + default: puts ("hppa2.0"); break; + } break; + #else /* !defined(_SC_KERNEL_BITS) */ + puts ("hppa2.0"); break; + #endif + default: puts ("hppa1.0"); break; + } + exit (0); + } +EOF + (CCOPTS= $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null) && HP_ARCH=`$dummy` + test -z "$HP_ARCH" && HP_ARCH=hppa + fi ;; + esac + if [ ${HP_ARCH} = "hppa2.0w" ] + then + eval $set_cc_for_build + + # hppa2.0w-hp-hpux* has a 64-bit kernel and a compiler generating + # 32-bit code. hppa64-hp-hpux* has the same kernel and a compiler + # generating 64-bit code. GNU and HP use different nomenclature: + # + # $ CC_FOR_BUILD=cc ./config.guess + # => hppa2.0w-hp-hpux11.23 + # $ CC_FOR_BUILD="cc +DA2.0w" ./config.guess + # => hppa64-hp-hpux11.23 + + if echo __LP64__ | (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | + grep -q __LP64__ + then + HP_ARCH="hppa2.0w" + else + HP_ARCH="hppa64" + fi + fi + echo ${HP_ARCH}-hp-hpux${HPUX_REV} + exit ;; + ia64:HP-UX:*:*) + HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` + echo ia64-hp-hpux${HPUX_REV} + exit ;; + 3050*:HI-UX:*:*) + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + #include + int + main () + { + long cpu = sysconf (_SC_CPU_VERSION); + /* The order matters, because CPU_IS_HP_MC68K erroneously returns + true for CPU_PA_RISC1_0. CPU_IS_PA_RISC returns correct + results, however. */ + if (CPU_IS_PA_RISC (cpu)) + { + switch (cpu) + { + case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break; + case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break; + case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break; + default: puts ("hppa-hitachi-hiuxwe2"); break; + } + } + else if (CPU_IS_HP_MC68K (cpu)) + puts ("m68k-hitachi-hiuxwe2"); + else puts ("unknown-hitachi-hiuxwe2"); + exit (0); + } +EOF + $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` && + { echo "$SYSTEM_NAME"; exit; } + echo unknown-hitachi-hiuxwe2 + exit ;; + 9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* ) + echo hppa1.1-hp-bsd + exit ;; + 9000/8??:4.3bsd:*:*) + echo hppa1.0-hp-bsd + exit ;; + *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*) + echo hppa1.0-hp-mpeix + exit ;; + hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* ) + echo hppa1.1-hp-osf + exit ;; + hp8??:OSF1:*:*) + echo hppa1.0-hp-osf + exit ;; + i*86:OSF1:*:*) + if [ -x /usr/sbin/sysversion ] ; then + echo ${UNAME_MACHINE}-unknown-osf1mk + else + echo ${UNAME_MACHINE}-unknown-osf1 + fi + exit ;; + parisc*:Lites*:*:*) + echo hppa1.1-hp-lites + exit ;; + C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*) + echo c1-convex-bsd + exit ;; + C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*) + if getsysinfo -f scalar_acc + then echo c32-convex-bsd + else echo c2-convex-bsd + fi + exit ;; + C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*) + echo c34-convex-bsd + exit ;; + C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*) + echo c38-convex-bsd + exit ;; + C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*) + echo c4-convex-bsd + exit ;; + CRAY*Y-MP:*:*:*) + echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' + exit ;; + CRAY*[A-Z]90:*:*:*) + echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \ + | sed -e 's/CRAY.*\([A-Z]90\)/\1/' \ + -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \ + -e 's/\.[^.]*$/.X/' + exit ;; + CRAY*TS:*:*:*) + echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' + exit ;; + CRAY*T3E:*:*:*) + echo alphaev5-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' + exit ;; + CRAY*SV1:*:*:*) + echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' + exit ;; + *:UNICOS/mp:*:*) + echo craynv-cray-unicosmp${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' + exit ;; + F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*) + FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'` + FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'` + FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'` + echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" + exit ;; + 5000:UNIX_System_V:4.*:*) + FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'` + FUJITSU_REL=`echo ${UNAME_RELEASE} | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/ /_/'` + echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" + exit ;; + i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*) + echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE} + exit ;; + sparc*:BSD/OS:*:*) + echo sparc-unknown-bsdi${UNAME_RELEASE} + exit ;; + *:BSD/OS:*:*) + echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE} + exit ;; + *:FreeBSD:*:*) + UNAME_PROCESSOR=`/usr/bin/uname -p` + case ${UNAME_PROCESSOR} in + amd64) + echo x86_64-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;; + *) + echo ${UNAME_PROCESSOR}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;; + esac + exit ;; + i*:CYGWIN*:*) + echo ${UNAME_MACHINE}-pc-cygwin + exit ;; + *:MINGW*:*) + echo ${UNAME_MACHINE}-pc-mingw32 + exit ;; + i*:MSYS*:*) + echo ${UNAME_MACHINE}-pc-msys + exit ;; + i*:windows32*:*) + # uname -m includes "-pc" on this system. + echo ${UNAME_MACHINE}-mingw32 + exit ;; + i*:PW*:*) + echo ${UNAME_MACHINE}-pc-pw32 + exit ;; + *:Interix*:*) + case ${UNAME_MACHINE} in + x86) + echo i586-pc-interix${UNAME_RELEASE} + exit ;; + authenticamd | genuineintel | EM64T) + echo x86_64-unknown-interix${UNAME_RELEASE} + exit ;; + IA64) + echo ia64-unknown-interix${UNAME_RELEASE} + exit ;; + esac ;; + [345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*) + echo i${UNAME_MACHINE}-pc-mks + exit ;; + 8664:Windows_NT:*) + echo x86_64-pc-mks + exit ;; + i*:Windows_NT*:* | Pentium*:Windows_NT*:*) + # How do we know it's Interix rather than the generic POSIX subsystem? + # It also conflicts with pre-2.0 versions of AT&T UWIN. Should we + # UNAME_MACHINE based on the output of uname instead of i386? + echo i586-pc-interix + exit ;; + i*:UWIN*:*) + echo ${UNAME_MACHINE}-pc-uwin + exit ;; + amd64:CYGWIN*:*:* | x86_64:CYGWIN*:*:*) + echo x86_64-unknown-cygwin + exit ;; + p*:CYGWIN*:*) + echo powerpcle-unknown-cygwin + exit ;; + prep*:SunOS:5.*:*) + echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit ;; + *:GNU:*:*) + # the GNU system + echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'` + exit ;; + *:GNU/*:*:*) + # other systems with GNU libc and userland + echo ${UNAME_MACHINE}-unknown-`echo ${UNAME_SYSTEM} | sed 's,^[^/]*/,,' | tr '[A-Z]' '[a-z]'``echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`-gnu + exit ;; + i*86:Minix:*:*) + echo ${UNAME_MACHINE}-pc-minix + exit ;; + aarch64:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + aarch64_be:Linux:*:*) + UNAME_MACHINE=aarch64_be + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + alpha:Linux:*:*) + case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in + EV5) UNAME_MACHINE=alphaev5 ;; + EV56) UNAME_MACHINE=alphaev56 ;; + PCA56) UNAME_MACHINE=alphapca56 ;; + PCA57) UNAME_MACHINE=alphapca56 ;; + EV6) UNAME_MACHINE=alphaev6 ;; + EV67) UNAME_MACHINE=alphaev67 ;; + EV68*) UNAME_MACHINE=alphaev68 ;; + esac + objdump --private-headers /bin/sh | grep -q ld.so.1 + if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi + echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC} + exit ;; + arm*:Linux:*:*) + eval $set_cc_for_build + if echo __ARM_EABI__ | $CC_FOR_BUILD -E - 2>/dev/null \ + | grep -q __ARM_EABI__ + then + echo ${UNAME_MACHINE}-unknown-linux-gnu + else + if echo __ARM_PCS_VFP | $CC_FOR_BUILD -E - 2>/dev/null \ + | grep -q __ARM_PCS_VFP + then + echo ${UNAME_MACHINE}-unknown-linux-gnueabi + else + echo ${UNAME_MACHINE}-unknown-linux-gnueabihf + fi + fi + exit ;; + avr32*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + cris:Linux:*:*) + echo ${UNAME_MACHINE}-axis-linux-gnu + exit ;; + crisv32:Linux:*:*) + echo ${UNAME_MACHINE}-axis-linux-gnu + exit ;; + frv:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + hexagon:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + i*86:Linux:*:*) + LIBC=gnu + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + #ifdef __dietlibc__ + LIBC=dietlibc + #endif +EOF + eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^LIBC'` + echo "${UNAME_MACHINE}-pc-linux-${LIBC}" + exit ;; + ia64:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + m32r*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + m68*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + mips:Linux:*:* | mips64:Linux:*:*) + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + #undef CPU + #undef ${UNAME_MACHINE} + #undef ${UNAME_MACHINE}el + #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL) + CPU=${UNAME_MACHINE}el + #else + #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB) + CPU=${UNAME_MACHINE} + #else + CPU= + #endif + #endif +EOF + eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^CPU'` + test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; } + ;; + or32:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + padre:Linux:*:*) + echo sparc-unknown-linux-gnu + exit ;; + parisc64:Linux:*:* | hppa64:Linux:*:*) + echo hppa64-unknown-linux-gnu + exit ;; + parisc:Linux:*:* | hppa:Linux:*:*) + # Look for CPU level + case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in + PA7*) echo hppa1.1-unknown-linux-gnu ;; + PA8*) echo hppa2.0-unknown-linux-gnu ;; + *) echo hppa-unknown-linux-gnu ;; + esac + exit ;; + ppc64:Linux:*:*) + echo powerpc64-unknown-linux-gnu + exit ;; + ppc:Linux:*:*) + echo powerpc-unknown-linux-gnu + exit ;; + s390:Linux:*:* | s390x:Linux:*:*) + echo ${UNAME_MACHINE}-ibm-linux + exit ;; + sh64*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + sh*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + sparc:Linux:*:* | sparc64:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + tile*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + vax:Linux:*:*) + echo ${UNAME_MACHINE}-dec-linux-gnu + exit ;; + x86_64:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + xtensa*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + i*86:DYNIX/ptx:4*:*) + # ptx 4.0 does uname -s correctly, with DYNIX/ptx in there. + # earlier versions are messed up and put the nodename in both + # sysname and nodename. + echo i386-sequent-sysv4 + exit ;; + i*86:UNIX_SV:4.2MP:2.*) + # Unixware is an offshoot of SVR4, but it has its own version + # number series starting with 2... + # I am not positive that other SVR4 systems won't match this, + # I just have to hope. -- rms. + # Use sysv4.2uw... so that sysv4* matches it. + echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION} + exit ;; + i*86:OS/2:*:*) + # If we were able to find `uname', then EMX Unix compatibility + # is probably installed. + echo ${UNAME_MACHINE}-pc-os2-emx + exit ;; + i*86:XTS-300:*:STOP) + echo ${UNAME_MACHINE}-unknown-stop + exit ;; + i*86:atheos:*:*) + echo ${UNAME_MACHINE}-unknown-atheos + exit ;; + i*86:syllable:*:*) + echo ${UNAME_MACHINE}-pc-syllable + exit ;; + i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.[02]*:*) + echo i386-unknown-lynxos${UNAME_RELEASE} + exit ;; + i*86:*DOS:*:*) + echo ${UNAME_MACHINE}-pc-msdosdjgpp + exit ;; + i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*) + UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'` + if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then + echo ${UNAME_MACHINE}-univel-sysv${UNAME_REL} + else + echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL} + fi + exit ;; + i*86:*:5:[678]*) + # UnixWare 7.x, OpenUNIX and OpenServer 6. + case `/bin/uname -X | grep "^Machine"` in + *486*) UNAME_MACHINE=i486 ;; + *Pentium) UNAME_MACHINE=i586 ;; + *Pent*|*Celeron) UNAME_MACHINE=i686 ;; + esac + echo ${UNAME_MACHINE}-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION} + exit ;; + i*86:*:3.2:*) + if test -f /usr/options/cb.name; then + UNAME_REL=`sed -n 's/.*Version //p' /dev/null >/dev/null ; then + UNAME_REL=`(/bin/uname -X|grep Release|sed -e 's/.*= //')` + (/bin/uname -X|grep i80486 >/dev/null) && UNAME_MACHINE=i486 + (/bin/uname -X|grep '^Machine.*Pentium' >/dev/null) \ + && UNAME_MACHINE=i586 + (/bin/uname -X|grep '^Machine.*Pent *II' >/dev/null) \ + && UNAME_MACHINE=i686 + (/bin/uname -X|grep '^Machine.*Pentium Pro' >/dev/null) \ + && UNAME_MACHINE=i686 + echo ${UNAME_MACHINE}-pc-sco$UNAME_REL + else + echo ${UNAME_MACHINE}-pc-sysv32 + fi + exit ;; + pc:*:*:*) + # Left here for compatibility: + # uname -m prints for DJGPP always 'pc', but it prints nothing about + # the processor, so we play safe by assuming i586. + # Note: whatever this is, it MUST be the same as what config.sub + # prints for the "djgpp" host, or else GDB configury will decide that + # this is a cross-build. + echo i586-pc-msdosdjgpp + exit ;; + Intel:Mach:3*:*) + echo i386-pc-mach3 + exit ;; + paragon:*:*:*) + echo i860-intel-osf1 + exit ;; + i860:*:4.*:*) # i860-SVR4 + if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then + echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4 + else # Add other i860-SVR4 vendors below as they are discovered. + echo i860-unknown-sysv${UNAME_RELEASE} # Unknown i860-SVR4 + fi + exit ;; + mini*:CTIX:SYS*5:*) + # "miniframe" + echo m68010-convergent-sysv + exit ;; + mc68k:UNIX:SYSTEM5:3.51m) + echo m68k-convergent-sysv + exit ;; + M680?0:D-NIX:5.3:*) + echo m68k-diab-dnix + exit ;; + M68*:*:R3V[5678]*:*) + test -r /sysV68 && { echo 'm68k-motorola-sysv'; exit; } ;; + 3[345]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0 | S7501*:*:4.0:3.0) + OS_REL='' + test -r /etc/.relid \ + && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid` + /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ + && { echo i486-ncr-sysv4.3${OS_REL}; exit; } + /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \ + && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;; + 3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*) + /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ + && { echo i486-ncr-sysv4; exit; } ;; + NCR*:*:4.2:* | MPRAS*:*:4.2:*) + OS_REL='.3' + test -r /etc/.relid \ + && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid` + /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ + && { echo i486-ncr-sysv4.3${OS_REL}; exit; } + /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \ + && { echo i586-ncr-sysv4.3${OS_REL}; exit; } + /bin/uname -p 2>/dev/null | /bin/grep pteron >/dev/null \ + && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;; + m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*) + echo m68k-unknown-lynxos${UNAME_RELEASE} + exit ;; + mc68030:UNIX_System_V:4.*:*) + echo m68k-atari-sysv4 + exit ;; + TSUNAMI:LynxOS:2.*:*) + echo sparc-unknown-lynxos${UNAME_RELEASE} + exit ;; + rs6000:LynxOS:2.*:*) + echo rs6000-unknown-lynxos${UNAME_RELEASE} + exit ;; + PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.[02]*:*) + echo powerpc-unknown-lynxos${UNAME_RELEASE} + exit ;; + SM[BE]S:UNIX_SV:*:*) + echo mips-dde-sysv${UNAME_RELEASE} + exit ;; + RM*:ReliantUNIX-*:*:*) + echo mips-sni-sysv4 + exit ;; + RM*:SINIX-*:*:*) + echo mips-sni-sysv4 + exit ;; + *:SINIX-*:*:*) + if uname -p 2>/dev/null >/dev/null ; then + UNAME_MACHINE=`(uname -p) 2>/dev/null` + echo ${UNAME_MACHINE}-sni-sysv4 + else + echo ns32k-sni-sysv + fi + exit ;; + PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort + # says + echo i586-unisys-sysv4 + exit ;; + *:UNIX_System_V:4*:FTX*) + # From Gerald Hewes . + # How about differentiating between stratus architectures? -djm + echo hppa1.1-stratus-sysv4 + exit ;; + *:*:*:FTX*) + # From seanf@swdc.stratus.com. + echo i860-stratus-sysv4 + exit ;; + i*86:VOS:*:*) + # From Paul.Green@stratus.com. + echo ${UNAME_MACHINE}-stratus-vos + exit ;; + *:VOS:*:*) + # From Paul.Green@stratus.com. + echo hppa1.1-stratus-vos + exit ;; + mc68*:A/UX:*:*) + echo m68k-apple-aux${UNAME_RELEASE} + exit ;; + news*:NEWS-OS:6*:*) + echo mips-sony-newsos6 + exit ;; + R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*) + if [ -d /usr/nec ]; then + echo mips-nec-sysv${UNAME_RELEASE} + else + echo mips-unknown-sysv${UNAME_RELEASE} + fi + exit ;; + BeBox:BeOS:*:*) # BeOS running on hardware made by Be, PPC only. + echo powerpc-be-beos + exit ;; + BeMac:BeOS:*:*) # BeOS running on Mac or Mac clone, PPC only. + echo powerpc-apple-beos + exit ;; + BePC:BeOS:*:*) # BeOS running on Intel PC compatible. + echo i586-pc-beos + exit ;; + BePC:Haiku:*:*) # Haiku running on Intel PC compatible. + echo i586-pc-haiku + exit ;; + SX-4:SUPER-UX:*:*) + echo sx4-nec-superux${UNAME_RELEASE} + exit ;; + SX-5:SUPER-UX:*:*) + echo sx5-nec-superux${UNAME_RELEASE} + exit ;; + SX-6:SUPER-UX:*:*) + echo sx6-nec-superux${UNAME_RELEASE} + exit ;; + SX-7:SUPER-UX:*:*) + echo sx7-nec-superux${UNAME_RELEASE} + exit ;; + SX-8:SUPER-UX:*:*) + echo sx8-nec-superux${UNAME_RELEASE} + exit ;; + SX-8R:SUPER-UX:*:*) + echo sx8r-nec-superux${UNAME_RELEASE} + exit ;; + Power*:Rhapsody:*:*) + echo powerpc-apple-rhapsody${UNAME_RELEASE} + exit ;; + *:Rhapsody:*:*) + echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE} + exit ;; + *:Darwin:*:*) + UNAME_PROCESSOR=`uname -p` || UNAME_PROCESSOR=unknown + case $UNAME_PROCESSOR in + i386) + eval $set_cc_for_build + if [ "$CC_FOR_BUILD" != 'no_compiler_found' ]; then + if (echo '#ifdef __LP64__'; echo IS_64BIT_ARCH; echo '#endif') | \ + (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | \ + grep IS_64BIT_ARCH >/dev/null + then + UNAME_PROCESSOR="x86_64" + fi + fi ;; + unknown) UNAME_PROCESSOR=powerpc ;; + esac + echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE} + exit ;; + *:procnto*:*:* | *:QNX:[0123456789]*:*) + UNAME_PROCESSOR=`uname -p` + if test "$UNAME_PROCESSOR" = "x86"; then + UNAME_PROCESSOR=i386 + UNAME_MACHINE=pc + fi + echo ${UNAME_PROCESSOR}-${UNAME_MACHINE}-nto-qnx${UNAME_RELEASE} + exit ;; + *:QNX:*:4*) + echo i386-pc-qnx + exit ;; + NEO-?:NONSTOP_KERNEL:*:*) + echo neo-tandem-nsk${UNAME_RELEASE} + exit ;; + NSE-?:NONSTOP_KERNEL:*:*) + echo nse-tandem-nsk${UNAME_RELEASE} + exit ;; + NSR-?:NONSTOP_KERNEL:*:*) + echo nsr-tandem-nsk${UNAME_RELEASE} + exit ;; + *:NonStop-UX:*:*) + echo mips-compaq-nonstopux + exit ;; + BS2000:POSIX*:*:*) + echo bs2000-siemens-sysv + exit ;; + DS/*:UNIX_System_V:*:*) + echo ${UNAME_MACHINE}-${UNAME_SYSTEM}-${UNAME_RELEASE} + exit ;; + *:Plan9:*:*) + # "uname -m" is not consistent, so use $cputype instead. 386 + # is converted to i386 for consistency with other x86 + # operating systems. + if test "$cputype" = "386"; then + UNAME_MACHINE=i386 + else + UNAME_MACHINE="$cputype" + fi + echo ${UNAME_MACHINE}-unknown-plan9 + exit ;; + *:TOPS-10:*:*) + echo pdp10-unknown-tops10 + exit ;; + *:TENEX:*:*) + echo pdp10-unknown-tenex + exit ;; + KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*) + echo pdp10-dec-tops20 + exit ;; + XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*) + echo pdp10-xkl-tops20 + exit ;; + *:TOPS-20:*:*) + echo pdp10-unknown-tops20 + exit ;; + *:ITS:*:*) + echo pdp10-unknown-its + exit ;; + SEI:*:*:SEIUX) + echo mips-sei-seiux${UNAME_RELEASE} + exit ;; + *:DragonFly:*:*) + echo ${UNAME_MACHINE}-unknown-dragonfly`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` + exit ;; + *:*VMS:*:*) + UNAME_MACHINE=`(uname -p) 2>/dev/null` + case "${UNAME_MACHINE}" in + A*) echo alpha-dec-vms ; exit ;; + I*) echo ia64-dec-vms ; exit ;; + V*) echo vax-dec-vms ; exit ;; + esac ;; + *:XENIX:*:SysV) + echo i386-pc-xenix + exit ;; + i*86:skyos:*:*) + echo ${UNAME_MACHINE}-pc-skyos`echo ${UNAME_RELEASE}` | sed -e 's/ .*$//' + exit ;; + i*86:rdos:*:*) + echo ${UNAME_MACHINE}-pc-rdos + exit ;; + i*86:AROS:*:*) + echo ${UNAME_MACHINE}-pc-aros + exit ;; + x86_64:VMkernel:*:*) + echo ${UNAME_MACHINE}-unknown-esx + exit ;; +esac + +#echo '(No uname command or uname output not recognized.)' 1>&2 +#echo "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" 1>&2 + +eval $set_cc_for_build +cat >$dummy.c < +# include +#endif +main () +{ +#if defined (sony) +#if defined (MIPSEB) + /* BFD wants "bsd" instead of "newsos". Perhaps BFD should be changed, + I don't know.... */ + printf ("mips-sony-bsd\n"); exit (0); +#else +#include + printf ("m68k-sony-newsos%s\n", +#ifdef NEWSOS4 + "4" +#else + "" +#endif + ); exit (0); +#endif +#endif + +#if defined (__arm) && defined (__acorn) && defined (__unix) + printf ("arm-acorn-riscix\n"); exit (0); +#endif + +#if defined (hp300) && !defined (hpux) + printf ("m68k-hp-bsd\n"); exit (0); +#endif + +#if defined (NeXT) +#if !defined (__ARCHITECTURE__) +#define __ARCHITECTURE__ "m68k" +#endif + int version; + version=`(hostinfo | sed -n 's/.*NeXT Mach \([0-9]*\).*/\1/p') 2>/dev/null`; + if (version < 4) + printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version); + else + printf ("%s-next-openstep%d\n", __ARCHITECTURE__, version); + exit (0); +#endif + +#if defined (MULTIMAX) || defined (n16) +#if defined (UMAXV) + printf ("ns32k-encore-sysv\n"); exit (0); +#else +#if defined (CMU) + printf ("ns32k-encore-mach\n"); exit (0); +#else + printf ("ns32k-encore-bsd\n"); exit (0); +#endif +#endif +#endif + +#if defined (__386BSD__) + printf ("i386-pc-bsd\n"); exit (0); +#endif + +#if defined (sequent) +#if defined (i386) + printf ("i386-sequent-dynix\n"); exit (0); +#endif +#if defined (ns32000) + printf ("ns32k-sequent-dynix\n"); exit (0); +#endif +#endif + +#if defined (_SEQUENT_) + struct utsname un; + + uname(&un); + + if (strncmp(un.version, "V2", 2) == 0) { + printf ("i386-sequent-ptx2\n"); exit (0); + } + if (strncmp(un.version, "V1", 2) == 0) { /* XXX is V1 correct? */ + printf ("i386-sequent-ptx1\n"); exit (0); + } + printf ("i386-sequent-ptx\n"); exit (0); + +#endif + +#if defined (vax) +# if !defined (ultrix) +# include +# if defined (BSD) +# if BSD == 43 + printf ("vax-dec-bsd4.3\n"); exit (0); +# else +# if BSD == 199006 + printf ("vax-dec-bsd4.3reno\n"); exit (0); +# else + printf ("vax-dec-bsd\n"); exit (0); +# endif +# endif +# else + printf ("vax-dec-bsd\n"); exit (0); +# endif +# else + printf ("vax-dec-ultrix\n"); exit (0); +# endif +#endif + +#if defined (alliant) && defined (i860) + printf ("i860-alliant-bsd\n"); exit (0); +#endif + + exit (1); +} +EOF + +$CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null && SYSTEM_NAME=`$dummy` && + { echo "$SYSTEM_NAME"; exit; } + +# Apollos put the system type in the environment. + +test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit; } + +# Convex versions that predate uname can use getsysinfo(1) + +if [ -x /usr/convex/getsysinfo ] +then + case `getsysinfo -f cpu_type` in + c1*) + echo c1-convex-bsd + exit ;; + c2*) + if getsysinfo -f scalar_acc + then echo c32-convex-bsd + else echo c2-convex-bsd + fi + exit ;; + c34*) + echo c34-convex-bsd + exit ;; + c38*) + echo c38-convex-bsd + exit ;; + c4*) + echo c4-convex-bsd + exit ;; + esac +fi + +cat >&2 < in order to provide the needed +information to handle your system. + +config.guess timestamp = $timestamp + +uname -m = `(uname -m) 2>/dev/null || echo unknown` +uname -r = `(uname -r) 2>/dev/null || echo unknown` +uname -s = `(uname -s) 2>/dev/null || echo unknown` +uname -v = `(uname -v) 2>/dev/null || echo unknown` + +/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null` +/bin/uname -X = `(/bin/uname -X) 2>/dev/null` + +hostinfo = `(hostinfo) 2>/dev/null` +/bin/universe = `(/bin/universe) 2>/dev/null` +/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null` +/bin/arch = `(/bin/arch) 2>/dev/null` +/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null` +/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null` + +UNAME_MACHINE = ${UNAME_MACHINE} +UNAME_RELEASE = ${UNAME_RELEASE} +UNAME_SYSTEM = ${UNAME_SYSTEM} +UNAME_VERSION = ${UNAME_VERSION} +EOF + +exit 1 + +# Local variables: +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "timestamp='" +# time-stamp-format: "%:y-%02m-%02d" +# time-stamp-end: "'" +# End: ADDED autoconf/config.sub Index: autoconf/config.sub ================================================================== --- autoconf/config.sub +++ autoconf/config.sub @@ -0,0 +1,1773 @@ +#! /bin/sh +# Configuration validation subroutine script. +# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, +# 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, +# 2011, 2012 Free Software Foundation, Inc. + +timestamp='2012-02-10' + +# This file is (in principle) common to ALL GNU software. +# The presence of a machine in this file suggests that SOME GNU software +# can handle that machine. It does not imply ALL GNU software can. +# +# This file is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, see . +# +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + + +# Please send patches to . Submit a context +# diff and a properly formatted GNU ChangeLog entry. +# +# Configuration subroutine to validate and canonicalize a configuration type. +# Supply the specified configuration type as an argument. +# If it is invalid, we print an error message on stderr and exit with code 1. +# Otherwise, we print the canonical config type on stdout and succeed. + +# You can get the latest version of this script from: +# http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub;hb=HEAD + +# This file is supposed to be the same for all GNU packages +# and recognize all the CPU types, system types and aliases +# that are meaningful with *any* GNU software. +# Each package is responsible for reporting which valid configurations +# it does not support. The user should be able to distinguish +# a failure to support a valid configuration from a meaningless +# configuration. + +# The goal of this file is to map all the various variations of a given +# machine specification into a single specification in the form: +# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM +# or in some cases, the newer four-part form: +# CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM +# It is wrong to echo any other type of specification. + +me=`echo "$0" | sed -e 's,.*/,,'` + +usage="\ +Usage: $0 [OPTION] CPU-MFR-OPSYS + $0 [OPTION] ALIAS + +Canonicalize a configuration name. + +Operation modes: + -h, --help print this help, then exit + -t, --time-stamp print date of last modification, then exit + -v, --version print version number, then exit + +Report bugs and patches to ." + +version="\ +GNU config.sub ($timestamp) + +Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, +2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012 +Free Software Foundation, Inc. + +This is free software; see the source for copying conditions. There is NO +warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." + +help=" +Try \`$me --help' for more information." + +# Parse command line +while test $# -gt 0 ; do + case $1 in + --time-stamp | --time* | -t ) + echo "$timestamp" ; exit ;; + --version | -v ) + echo "$version" ; exit ;; + --help | --h* | -h ) + echo "$usage"; exit ;; + -- ) # Stop option processing + shift; break ;; + - ) # Use stdin as input. + break ;; + -* ) + echo "$me: invalid option $1$help" + exit 1 ;; + + *local*) + # First pass through any local machine types. + echo $1 + exit ;; + + * ) + break ;; + esac +done + +case $# in + 0) echo "$me: missing argument$help" >&2 + exit 1;; + 1) ;; + *) echo "$me: too many arguments$help" >&2 + exit 1;; +esac + +# Separate what the user gave into CPU-COMPANY and OS or KERNEL-OS (if any). +# Here we must recognize all the valid KERNEL-OS combinations. +maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'` +case $maybe_os in + nto-qnx* | linux-gnu* | linux-android* | linux-dietlibc | linux-newlib* | \ + linux-uclibc* | uclinux-uclibc* | uclinux-gnu* | kfreebsd*-gnu* | \ + knetbsd*-gnu* | netbsd*-gnu* | \ + kopensolaris*-gnu* | \ + storm-chaos* | os2-emx* | rtmk-nova*) + os=-$maybe_os + basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'` + ;; + android-linux) + os=-linux-android + basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`-unknown + ;; + *) + basic_machine=`echo $1 | sed 's/-[^-]*$//'` + if [ $basic_machine != $1 ] + then os=`echo $1 | sed 's/.*-/-/'` + else os=; fi + ;; +esac + +### Let's recognize common machines as not being operating systems so +### that things like config.sub decstation-3100 work. We also +### recognize some manufacturers as not being operating systems, so we +### can provide default operating systems below. +case $os in + -sun*os*) + # Prevent following clause from handling this invalid input. + ;; + -dec* | -mips* | -sequent* | -encore* | -pc532* | -sgi* | -sony* | \ + -att* | -7300* | -3300* | -delta* | -motorola* | -sun[234]* | \ + -unicom* | -ibm* | -next | -hp | -isi* | -apollo | -altos* | \ + -convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\ + -c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \ + -harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \ + -apple | -axis | -knuth | -cray | -microblaze) + os= + basic_machine=$1 + ;; + -bluegene*) + os=-cnk + ;; + -sim | -cisco | -oki | -wec | -winbond) + os= + basic_machine=$1 + ;; + -scout) + ;; + -wrs) + os=-vxworks + basic_machine=$1 + ;; + -chorusos*) + os=-chorusos + basic_machine=$1 + ;; + -chorusrdb) + os=-chorusrdb + basic_machine=$1 + ;; + -hiux*) + os=-hiuxwe2 + ;; + -sco6) + os=-sco5v6 + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -sco5) + os=-sco3.2v5 + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -sco4) + os=-sco3.2v4 + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -sco3.2.[4-9]*) + os=`echo $os | sed -e 's/sco3.2./sco3.2v/'` + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -sco3.2v[4-9]*) + # Don't forget version if it is 3.2v4 or newer. + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -sco5v6*) + # Don't forget version if it is 3.2v4 or newer. + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -sco*) + os=-sco3.2v2 + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -udk*) + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -isc) + os=-isc2.2 + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -clix*) + basic_machine=clipper-intergraph + ;; + -isc*) + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -lynx*) + os=-lynxos + ;; + -ptx*) + basic_machine=`echo $1 | sed -e 's/86-.*/86-sequent/'` + ;; + -windowsnt*) + os=`echo $os | sed -e 's/windowsnt/winnt/'` + ;; + -psos*) + os=-psos + ;; + -mint | -mint[0-9]*) + basic_machine=m68k-atari + os=-mint + ;; +esac + +# Decode aliases for certain CPU-COMPANY combinations. +case $basic_machine in + # Recognize the basic CPU types without company name. + # Some are omitted here because they have special meanings below. + 1750a | 580 \ + | a29k \ + | aarch64 | aarch64_be \ + | alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \ + | alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \ + | am33_2.0 \ + | arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr | avr32 \ + | be32 | be64 \ + | bfin \ + | c4x | clipper \ + | d10v | d30v | dlx | dsp16xx \ + | epiphany \ + | fido | fr30 | frv \ + | h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \ + | hexagon \ + | i370 | i860 | i960 | ia64 \ + | ip2k | iq2000 \ + | le32 | le64 \ + | lm32 \ + | m32c | m32r | m32rle | m68000 | m68k | m88k \ + | maxq | mb | microblaze | mcore | mep | metag \ + | mips | mipsbe | mipseb | mipsel | mipsle \ + | mips16 \ + | mips64 | mips64el \ + | mips64octeon | mips64octeonel \ + | mips64orion | mips64orionel \ + | mips64r5900 | mips64r5900el \ + | mips64vr | mips64vrel \ + | mips64vr4100 | mips64vr4100el \ + | mips64vr4300 | mips64vr4300el \ + | mips64vr5000 | mips64vr5000el \ + | mips64vr5900 | mips64vr5900el \ + | mipsisa32 | mipsisa32el \ + | mipsisa32r2 | mipsisa32r2el \ + | mipsisa64 | mipsisa64el \ + | mipsisa64r2 | mipsisa64r2el \ + | mipsisa64sb1 | mipsisa64sb1el \ + | mipsisa64sr71k | mipsisa64sr71kel \ + | mipstx39 | mipstx39el \ + | mn10200 | mn10300 \ + | moxie \ + | mt \ + | msp430 \ + | nds32 | nds32le | nds32be \ + | nios | nios2 \ + | ns16k | ns32k \ + | open8 \ + | or32 \ + | pdp10 | pdp11 | pj | pjl \ + | powerpc | powerpc64 | powerpc64le | powerpcle \ + | pyramid \ + | rl78 | rx \ + | score \ + | sh | sh[1234] | sh[24]a | sh[24]aeb | sh[23]e | sh[34]eb | sheb | shbe | shle | sh[1234]le | sh3ele \ + | sh64 | sh64le \ + | sparc | sparc64 | sparc64b | sparc64v | sparc86x | sparclet | sparclite \ + | sparcv8 | sparcv9 | sparcv9b | sparcv9v \ + | spu \ + | tahoe | tic4x | tic54x | tic55x | tic6x | tic80 | tron \ + | ubicom32 \ + | v850 | v850e | v850e1 | v850e2 | v850es | v850e2v3 \ + | we32k \ + | x86 | xc16x | xstormy16 | xtensa \ + | z8k | z80) + basic_machine=$basic_machine-unknown + ;; + c54x) + basic_machine=tic54x-unknown + ;; + c55x) + basic_machine=tic55x-unknown + ;; + c6x) + basic_machine=tic6x-unknown + ;; + m6811 | m68hc11 | m6812 | m68hc12 | m68hcs12x | picochip) + basic_machine=$basic_machine-unknown + os=-none + ;; + m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | v70 | w65 | z8k) + ;; + ms1) + basic_machine=mt-unknown + ;; + + strongarm | thumb | xscale) + basic_machine=arm-unknown + ;; + xgate) + basic_machine=$basic_machine-unknown + os=-none + ;; + xscaleeb) + basic_machine=armeb-unknown + ;; + + xscaleel) + basic_machine=armel-unknown + ;; + + # We use `pc' rather than `unknown' + # because (1) that's what they normally are, and + # (2) the word "unknown" tends to confuse beginning users. + i*86 | x86_64) + basic_machine=$basic_machine-pc + ;; + # Object if more than one company name word. + *-*-*) + echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2 + exit 1 + ;; + # Recognize the basic CPU types with company name. + 580-* \ + | a29k-* \ + | aarch64-* | aarch64_be-* \ + | alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \ + | alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \ + | alphapca5[67]-* | alpha64pca5[67]-* | arc-* \ + | arm-* | armbe-* | armle-* | armeb-* | armv*-* \ + | avr-* | avr32-* \ + | be32-* | be64-* \ + | bfin-* | bs2000-* \ + | c[123]* | c30-* | [cjt]90-* | c4x-* \ + | clipper-* | craynv-* | cydra-* \ + | d10v-* | d30v-* | dlx-* \ + | elxsi-* \ + | f30[01]-* | f700-* | fido-* | fr30-* | frv-* | fx80-* \ + | h8300-* | h8500-* \ + | hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \ + | hexagon-* \ + | i*86-* | i860-* | i960-* | ia64-* \ + | ip2k-* | iq2000-* \ + | le32-* | le64-* \ + | lm32-* \ + | m32c-* | m32r-* | m32rle-* \ + | m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \ + | m88110-* | m88k-* | maxq-* | mcore-* | metag-* | microblaze-* \ + | mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \ + | mips16-* \ + | mips64-* | mips64el-* \ + | mips64octeon-* | mips64octeonel-* \ + | mips64orion-* | mips64orionel-* \ + | mips64r5900-* | mips64r5900el-* \ + | mips64vr-* | mips64vrel-* \ + | mips64vr4100-* | mips64vr4100el-* \ + | mips64vr4300-* | mips64vr4300el-* \ + | mips64vr5000-* | mips64vr5000el-* \ + | mips64vr5900-* | mips64vr5900el-* \ + | mipsisa32-* | mipsisa32el-* \ + | mipsisa32r2-* | mipsisa32r2el-* \ + | mipsisa64-* | mipsisa64el-* \ + | mipsisa64r2-* | mipsisa64r2el-* \ + | mipsisa64sb1-* | mipsisa64sb1el-* \ + | mipsisa64sr71k-* | mipsisa64sr71kel-* \ + | mipstx39-* | mipstx39el-* \ + | mmix-* \ + | mt-* \ + | msp430-* \ + | nds32-* | nds32le-* | nds32be-* \ + | nios-* | nios2-* \ + | none-* | np1-* | ns16k-* | ns32k-* \ + | open8-* \ + | orion-* \ + | pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \ + | powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* \ + | pyramid-* \ + | rl78-* | romp-* | rs6000-* | rx-* \ + | sh-* | sh[1234]-* | sh[24]a-* | sh[24]aeb-* | sh[23]e-* | sh[34]eb-* | sheb-* | shbe-* \ + | shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \ + | sparc-* | sparc64-* | sparc64b-* | sparc64v-* | sparc86x-* | sparclet-* \ + | sparclite-* \ + | sparcv8-* | sparcv9-* | sparcv9b-* | sparcv9v-* | sv1-* | sx?-* \ + | tahoe-* \ + | tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* \ + | tile*-* \ + | tron-* \ + | ubicom32-* \ + | v850-* | v850e-* | v850e1-* | v850es-* | v850e2-* | v850e2v3-* \ + | vax-* \ + | we32k-* \ + | x86-* | x86_64-* | xc16x-* | xps100-* \ + | xstormy16-* | xtensa*-* \ + | ymp-* \ + | z8k-* | z80-*) + ;; + # Recognize the basic CPU types without company name, with glob match. + xtensa*) + basic_machine=$basic_machine-unknown + ;; + # Recognize the various machine names and aliases which stand + # for a CPU type and a company and sometimes even an OS. + 386bsd) + basic_machine=i386-unknown + os=-bsd + ;; + 3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc) + basic_machine=m68000-att + ;; + 3b*) + basic_machine=we32k-att + ;; + a29khif) + basic_machine=a29k-amd + os=-udi + ;; + abacus) + basic_machine=abacus-unknown + ;; + adobe68k) + basic_machine=m68010-adobe + os=-scout + ;; + alliant | fx80) + basic_machine=fx80-alliant + ;; + altos | altos3068) + basic_machine=m68k-altos + ;; + am29k) + basic_machine=a29k-none + os=-bsd + ;; + amd64) + basic_machine=x86_64-pc + ;; + amd64-*) + basic_machine=x86_64-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + amdahl) + basic_machine=580-amdahl + os=-sysv + ;; + amiga | amiga-*) + basic_machine=m68k-unknown + ;; + amigaos | amigados) + basic_machine=m68k-unknown + os=-amigaos + ;; + amigaunix | amix) + basic_machine=m68k-unknown + os=-sysv4 + ;; + apollo68) + basic_machine=m68k-apollo + os=-sysv + ;; + apollo68bsd) + basic_machine=m68k-apollo + os=-bsd + ;; + aros) + basic_machine=i386-pc + os=-aros + ;; + aux) + basic_machine=m68k-apple + os=-aux + ;; + balance) + basic_machine=ns32k-sequent + os=-dynix + ;; + blackfin) + basic_machine=bfin-unknown + os=-linux + ;; + blackfin-*) + basic_machine=bfin-`echo $basic_machine | sed 's/^[^-]*-//'` + os=-linux + ;; + bluegene*) + basic_machine=powerpc-ibm + os=-cnk + ;; + c54x-*) + basic_machine=tic54x-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + c55x-*) + basic_machine=tic55x-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + c6x-*) + basic_machine=tic6x-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + c90) + basic_machine=c90-cray + os=-unicos + ;; + cegcc) + basic_machine=arm-unknown + os=-cegcc + ;; + convex-c1) + basic_machine=c1-convex + os=-bsd + ;; + convex-c2) + basic_machine=c2-convex + os=-bsd + ;; + convex-c32) + basic_machine=c32-convex + os=-bsd + ;; + convex-c34) + basic_machine=c34-convex + os=-bsd + ;; + convex-c38) + basic_machine=c38-convex + os=-bsd + ;; + cray | j90) + basic_machine=j90-cray + os=-unicos + ;; + craynv) + basic_machine=craynv-cray + os=-unicosmp + ;; + cr16 | cr16-*) + basic_machine=cr16-unknown + os=-elf + ;; + crds | unos) + basic_machine=m68k-crds + ;; + crisv32 | crisv32-* | etraxfs*) + basic_machine=crisv32-axis + ;; + cris | cris-* | etrax*) + basic_machine=cris-axis + ;; + crx) + basic_machine=crx-unknown + os=-elf + ;; + da30 | da30-*) + basic_machine=m68k-da30 + ;; + decstation | decstation-3100 | pmax | pmax-* | pmin | dec3100 | decstatn) + basic_machine=mips-dec + ;; + decsystem10* | dec10*) + basic_machine=pdp10-dec + os=-tops10 + ;; + decsystem20* | dec20*) + basic_machine=pdp10-dec + os=-tops20 + ;; + delta | 3300 | motorola-3300 | motorola-delta \ + | 3300-motorola | delta-motorola) + basic_machine=m68k-motorola + ;; + delta88) + basic_machine=m88k-motorola + os=-sysv3 + ;; + dicos) + basic_machine=i686-pc + os=-dicos + ;; + djgpp) + basic_machine=i586-pc + os=-msdosdjgpp + ;; + dpx20 | dpx20-*) + basic_machine=rs6000-bull + os=-bosx + ;; + dpx2* | dpx2*-bull) + basic_machine=m68k-bull + os=-sysv3 + ;; + ebmon29k) + basic_machine=a29k-amd + os=-ebmon + ;; + elxsi) + basic_machine=elxsi-elxsi + os=-bsd + ;; + encore | umax | mmax) + basic_machine=ns32k-encore + ;; + es1800 | OSE68k | ose68k | ose | OSE) + basic_machine=m68k-ericsson + os=-ose + ;; + fx2800) + basic_machine=i860-alliant + ;; + genix) + basic_machine=ns32k-ns + ;; + gmicro) + basic_machine=tron-gmicro + os=-sysv + ;; + go32) + basic_machine=i386-pc + os=-go32 + ;; + h3050r* | hiux*) + basic_machine=hppa1.1-hitachi + os=-hiuxwe2 + ;; + h8300hms) + basic_machine=h8300-hitachi + os=-hms + ;; + h8300xray) + basic_machine=h8300-hitachi + os=-xray + ;; + h8500hms) + basic_machine=h8500-hitachi + os=-hms + ;; + harris) + basic_machine=m88k-harris + os=-sysv3 + ;; + hp300-*) + basic_machine=m68k-hp + ;; + hp300bsd) + basic_machine=m68k-hp + os=-bsd + ;; + hp300hpux) + basic_machine=m68k-hp + os=-hpux + ;; + hp3k9[0-9][0-9] | hp9[0-9][0-9]) + basic_machine=hppa1.0-hp + ;; + hp9k2[0-9][0-9] | hp9k31[0-9]) + basic_machine=m68000-hp + ;; + hp9k3[2-9][0-9]) + basic_machine=m68k-hp + ;; + hp9k6[0-9][0-9] | hp6[0-9][0-9]) + basic_machine=hppa1.0-hp + ;; + hp9k7[0-79][0-9] | hp7[0-79][0-9]) + basic_machine=hppa1.1-hp + ;; + hp9k78[0-9] | hp78[0-9]) + # FIXME: really hppa2.0-hp + basic_machine=hppa1.1-hp + ;; + hp9k8[67]1 | hp8[67]1 | hp9k80[24] | hp80[24] | hp9k8[78]9 | hp8[78]9 | hp9k893 | hp893) + # FIXME: really hppa2.0-hp + basic_machine=hppa1.1-hp + ;; + hp9k8[0-9][13679] | hp8[0-9][13679]) + basic_machine=hppa1.1-hp + ;; + hp9k8[0-9][0-9] | hp8[0-9][0-9]) + basic_machine=hppa1.0-hp + ;; + hppa-next) + os=-nextstep3 + ;; + hppaosf) + basic_machine=hppa1.1-hp + os=-osf + ;; + hppro) + basic_machine=hppa1.1-hp + os=-proelf + ;; + i370-ibm* | ibm*) + basic_machine=i370-ibm + ;; + i*86v32) + basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` + os=-sysv32 + ;; + i*86v4*) + basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` + os=-sysv4 + ;; + i*86v) + basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` + os=-sysv + ;; + i*86sol2) + basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` + os=-solaris2 + ;; + i386mach) + basic_machine=i386-mach + os=-mach + ;; + i386-vsta | vsta) + basic_machine=i386-unknown + os=-vsta + ;; + iris | iris4d) + basic_machine=mips-sgi + case $os in + -irix*) + ;; + *) + os=-irix4 + ;; + esac + ;; + isi68 | isi) + basic_machine=m68k-isi + os=-sysv + ;; + m68knommu) + basic_machine=m68k-unknown + os=-linux + ;; + m68knommu-*) + basic_machine=m68k-`echo $basic_machine | sed 's/^[^-]*-//'` + os=-linux + ;; + m88k-omron*) + basic_machine=m88k-omron + ;; + magnum | m3230) + basic_machine=mips-mips + os=-sysv + ;; + merlin) + basic_machine=ns32k-utek + os=-sysv + ;; + microblaze) + basic_machine=microblaze-xilinx + ;; + mingw32) + basic_machine=i386-pc + os=-mingw32 + ;; + mingw32ce) + basic_machine=arm-unknown + os=-mingw32ce + ;; + miniframe) + basic_machine=m68000-convergent + ;; + *mint | -mint[0-9]* | *MiNT | *MiNT[0-9]*) + basic_machine=m68k-atari + os=-mint + ;; + mips3*-*) + basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'` + ;; + mips3*) + basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown + ;; + monitor) + basic_machine=m68k-rom68k + os=-coff + ;; + morphos) + basic_machine=powerpc-unknown + os=-morphos + ;; + msdos) + basic_machine=i386-pc + os=-msdos + ;; + ms1-*) + basic_machine=`echo $basic_machine | sed -e 's/ms1-/mt-/'` + ;; + msys) + basic_machine=i386-pc + os=-msys + ;; + mvs) + basic_machine=i370-ibm + os=-mvs + ;; + nacl) + basic_machine=le32-unknown + os=-nacl + ;; + ncr3000) + basic_machine=i486-ncr + os=-sysv4 + ;; + netbsd386) + basic_machine=i386-unknown + os=-netbsd + ;; + netwinder) + basic_machine=armv4l-rebel + os=-linux + ;; + news | news700 | news800 | news900) + basic_machine=m68k-sony + os=-newsos + ;; + news1000) + basic_machine=m68030-sony + os=-newsos + ;; + news-3600 | risc-news) + basic_machine=mips-sony + os=-newsos + ;; + necv70) + basic_machine=v70-nec + os=-sysv + ;; + next | m*-next ) + basic_machine=m68k-next + case $os in + -nextstep* ) + ;; + -ns2*) + os=-nextstep2 + ;; + *) + os=-nextstep3 + ;; + esac + ;; + nh3000) + basic_machine=m68k-harris + os=-cxux + ;; + nh[45]000) + basic_machine=m88k-harris + os=-cxux + ;; + nindy960) + basic_machine=i960-intel + os=-nindy + ;; + mon960) + basic_machine=i960-intel + os=-mon960 + ;; + nonstopux) + basic_machine=mips-compaq + os=-nonstopux + ;; + np1) + basic_machine=np1-gould + ;; + neo-tandem) + basic_machine=neo-tandem + ;; + nse-tandem) + basic_machine=nse-tandem + ;; + nsr-tandem) + basic_machine=nsr-tandem + ;; + op50n-* | op60c-*) + basic_machine=hppa1.1-oki + os=-proelf + ;; + openrisc | openrisc-*) + basic_machine=or32-unknown + ;; + os400) + basic_machine=powerpc-ibm + os=-os400 + ;; + OSE68000 | ose68000) + basic_machine=m68000-ericsson + os=-ose + ;; + os68k) + basic_machine=m68k-none + os=-os68k + ;; + pa-hitachi) + basic_machine=hppa1.1-hitachi + os=-hiuxwe2 + ;; + paragon) + basic_machine=i860-intel + os=-osf + ;; + parisc) + basic_machine=hppa-unknown + os=-linux + ;; + parisc-*) + basic_machine=hppa-`echo $basic_machine | sed 's/^[^-]*-//'` + os=-linux + ;; + pbd) + basic_machine=sparc-tti + ;; + pbb) + basic_machine=m68k-tti + ;; + pc532 | pc532-*) + basic_machine=ns32k-pc532 + ;; + pc98) + basic_machine=i386-pc + ;; + pc98-*) + basic_machine=i386-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + pentium | p5 | k5 | k6 | nexgen | viac3) + basic_machine=i586-pc + ;; + pentiumpro | p6 | 6x86 | athlon | athlon_*) + basic_machine=i686-pc + ;; + pentiumii | pentium2 | pentiumiii | pentium3) + basic_machine=i686-pc + ;; + pentium4) + basic_machine=i786-pc + ;; + pentium-* | p5-* | k5-* | k6-* | nexgen-* | viac3-*) + basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + pentiumpro-* | p6-* | 6x86-* | athlon-*) + basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + pentiumii-* | pentium2-* | pentiumiii-* | pentium3-*) + basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + pentium4-*) + basic_machine=i786-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + pn) + basic_machine=pn-gould + ;; + power) basic_machine=power-ibm + ;; + ppc | ppcbe) basic_machine=powerpc-unknown + ;; + ppc-* | ppcbe-*) + basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + ppcle | powerpclittle | ppc-le | powerpc-little) + basic_machine=powerpcle-unknown + ;; + ppcle-* | powerpclittle-*) + basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + ppc64) basic_machine=powerpc64-unknown + ;; + ppc64-*) basic_machine=powerpc64-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + ppc64le | powerpc64little | ppc64-le | powerpc64-little) + basic_machine=powerpc64le-unknown + ;; + ppc64le-* | powerpc64little-*) + basic_machine=powerpc64le-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + ps2) + basic_machine=i386-ibm + ;; + pw32) + basic_machine=i586-unknown + os=-pw32 + ;; + rdos) + basic_machine=i386-pc + os=-rdos + ;; + rom68k) + basic_machine=m68k-rom68k + os=-coff + ;; + rm[46]00) + basic_machine=mips-siemens + ;; + rtpc | rtpc-*) + basic_machine=romp-ibm + ;; + s390 | s390-*) + basic_machine=s390-ibm + ;; + s390x | s390x-*) + basic_machine=s390x-ibm + ;; + sa29200) + basic_machine=a29k-amd + os=-udi + ;; + sb1) + basic_machine=mipsisa64sb1-unknown + ;; + sb1el) + basic_machine=mipsisa64sb1el-unknown + ;; + sde) + basic_machine=mipsisa32-sde + os=-elf + ;; + sei) + basic_machine=mips-sei + os=-seiux + ;; + sequent) + basic_machine=i386-sequent + ;; + sh) + basic_machine=sh-hitachi + os=-hms + ;; + sh5el) + basic_machine=sh5le-unknown + ;; + sh64) + basic_machine=sh64-unknown + ;; + sparclite-wrs | simso-wrs) + basic_machine=sparclite-wrs + os=-vxworks + ;; + sps7) + basic_machine=m68k-bull + os=-sysv2 + ;; + spur) + basic_machine=spur-unknown + ;; + st2000) + basic_machine=m68k-tandem + ;; + stratus) + basic_machine=i860-stratus + os=-sysv4 + ;; + strongarm-* | thumb-*) + basic_machine=arm-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + sun2) + basic_machine=m68000-sun + ;; + sun2os3) + basic_machine=m68000-sun + os=-sunos3 + ;; + sun2os4) + basic_machine=m68000-sun + os=-sunos4 + ;; + sun3os3) + basic_machine=m68k-sun + os=-sunos3 + ;; + sun3os4) + basic_machine=m68k-sun + os=-sunos4 + ;; + sun4os3) + basic_machine=sparc-sun + os=-sunos3 + ;; + sun4os4) + basic_machine=sparc-sun + os=-sunos4 + ;; + sun4sol2) + basic_machine=sparc-sun + os=-solaris2 + ;; + sun3 | sun3-*) + basic_machine=m68k-sun + ;; + sun4) + basic_machine=sparc-sun + ;; + sun386 | sun386i | roadrunner) + basic_machine=i386-sun + ;; + sv1) + basic_machine=sv1-cray + os=-unicos + ;; + symmetry) + basic_machine=i386-sequent + os=-dynix + ;; + t3e) + basic_machine=alphaev5-cray + os=-unicos + ;; + t90) + basic_machine=t90-cray + os=-unicos + ;; + tile*) + basic_machine=$basic_machine-unknown + os=-linux-gnu + ;; + tx39) + basic_machine=mipstx39-unknown + ;; + tx39el) + basic_machine=mipstx39el-unknown + ;; + toad1) + basic_machine=pdp10-xkl + os=-tops20 + ;; + tower | tower-32) + basic_machine=m68k-ncr + ;; + tpf) + basic_machine=s390x-ibm + os=-tpf + ;; + udi29k) + basic_machine=a29k-amd + os=-udi + ;; + ultra3) + basic_machine=a29k-nyu + os=-sym1 + ;; + v810 | necv810) + basic_machine=v810-nec + os=-none + ;; + vaxv) + basic_machine=vax-dec + os=-sysv + ;; + vms) + basic_machine=vax-dec + os=-vms + ;; + vpp*|vx|vx-*) + basic_machine=f301-fujitsu + ;; + vxworks960) + basic_machine=i960-wrs + os=-vxworks + ;; + vxworks68) + basic_machine=m68k-wrs + os=-vxworks + ;; + vxworks29k) + basic_machine=a29k-wrs + os=-vxworks + ;; + w65*) + basic_machine=w65-wdc + os=-none + ;; + w89k-*) + basic_machine=hppa1.1-winbond + os=-proelf + ;; + xbox) + basic_machine=i686-pc + os=-mingw32 + ;; + xps | xps100) + basic_machine=xps100-honeywell + ;; + xscale-* | xscalee[bl]-*) + basic_machine=`echo $basic_machine | sed 's/^xscale/arm/'` + ;; + ymp) + basic_machine=ymp-cray + os=-unicos + ;; + z8k-*-coff) + basic_machine=z8k-unknown + os=-sim + ;; + z80-*-coff) + basic_machine=z80-unknown + os=-sim + ;; + none) + basic_machine=none-none + os=-none + ;; + +# Here we handle the default manufacturer of certain CPU types. It is in +# some cases the only manufacturer, in others, it is the most popular. + w89k) + basic_machine=hppa1.1-winbond + ;; + op50n) + basic_machine=hppa1.1-oki + ;; + op60c) + basic_machine=hppa1.1-oki + ;; + romp) + basic_machine=romp-ibm + ;; + mmix) + basic_machine=mmix-knuth + ;; + rs6000) + basic_machine=rs6000-ibm + ;; + vax) + basic_machine=vax-dec + ;; + pdp10) + # there are many clones, so DEC is not a safe bet + basic_machine=pdp10-unknown + ;; + pdp11) + basic_machine=pdp11-dec + ;; + we32k) + basic_machine=we32k-att + ;; + sh[1234] | sh[24]a | sh[24]aeb | sh[34]eb | sh[1234]le | sh[23]ele) + basic_machine=sh-unknown + ;; + sparc | sparcv8 | sparcv9 | sparcv9b | sparcv9v) + basic_machine=sparc-sun + ;; + cydra) + basic_machine=cydra-cydrome + ;; + orion) + basic_machine=orion-highlevel + ;; + orion105) + basic_machine=clipper-highlevel + ;; + mac | mpw | mac-mpw) + basic_machine=m68k-apple + ;; + pmac | pmac-mpw) + basic_machine=powerpc-apple + ;; + *-unknown) + # Make sure to match an already-canonicalized machine name. + ;; + *) + echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2 + exit 1 + ;; +esac + +# Here we canonicalize certain aliases for manufacturers. +case $basic_machine in + *-digital*) + basic_machine=`echo $basic_machine | sed 's/digital.*/dec/'` + ;; + *-commodore*) + basic_machine=`echo $basic_machine | sed 's/commodore.*/cbm/'` + ;; + *) + ;; +esac + +# Decode manufacturer-specific aliases for certain operating systems. + +if [ x"$os" != x"" ] +then +case $os in + # First match some system type aliases + # that might get confused with valid system types. + # -solaris* is a basic system type, with this one exception. + -auroraux) + os=-auroraux + ;; + -solaris1 | -solaris1.*) + os=`echo $os | sed -e 's|solaris1|sunos4|'` + ;; + -solaris) + os=-solaris2 + ;; + -svr4*) + os=-sysv4 + ;; + -unixware*) + os=-sysv4.2uw + ;; + -gnu/linux*) + os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'` + ;; + # First accept the basic system types. + # The portable systems comes first. + # Each alternative MUST END IN A *, to match a version number. + # -sysv* is not here because it comes later, after sysvr4. + -gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \ + | -*vms* | -sco* | -esix* | -isc* | -aix* | -cnk* | -sunos | -sunos[34]*\ + | -hpux* | -unos* | -osf* | -luna* | -dgux* | -auroraux* | -solaris* \ + | -sym* | -kopensolaris* \ + | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \ + | -aos* | -aros* \ + | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \ + | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \ + | -hiux* | -386bsd* | -knetbsd* | -mirbsd* | -netbsd* \ + | -openbsd* | -solidbsd* \ + | -ekkobsd* | -kfreebsd* | -freebsd* | -riscix* | -lynxos* \ + | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \ + | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \ + | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \ + | -chorusos* | -chorusrdb* | -cegcc* \ + | -cygwin* | -msys* | -pe* | -psos* | -moss* | -proelf* | -rtems* \ + | -mingw32* | -linux-gnu* | -linux-android* \ + | -linux-newlib* | -linux-uclibc* \ + | -uxpv* | -beos* | -mpeix* | -udk* \ + | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \ + | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \ + | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \ + | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \ + | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \ + | -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly* \ + | -skyos* | -haiku* | -rdos* | -toppers* | -drops* | -es*) + # Remember, each alternative MUST END IN *, to match a version number. + ;; + -qnx*) + case $basic_machine in + x86-* | i*86-*) + ;; + *) + os=-nto$os + ;; + esac + ;; + -nto-qnx*) + ;; + -nto*) + os=`echo $os | sed -e 's|nto|nto-qnx|'` + ;; + -sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \ + | -windows* | -osx | -abug | -netware* | -os9* | -beos* | -haiku* \ + | -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*) + ;; + -mac*) + os=`echo $os | sed -e 's|mac|macos|'` + ;; + -linux-dietlibc) + os=-linux-dietlibc + ;; + -linux*) + os=`echo $os | sed -e 's|linux|linux-gnu|'` + ;; + -sunos5*) + os=`echo $os | sed -e 's|sunos5|solaris2|'` + ;; + -sunos6*) + os=`echo $os | sed -e 's|sunos6|solaris3|'` + ;; + -opened*) + os=-openedition + ;; + -os400*) + os=-os400 + ;; + -wince*) + os=-wince + ;; + -osfrose*) + os=-osfrose + ;; + -osf*) + os=-osf + ;; + -utek*) + os=-bsd + ;; + -dynix*) + os=-bsd + ;; + -acis*) + os=-aos + ;; + -atheos*) + os=-atheos + ;; + -syllable*) + os=-syllable + ;; + -386bsd) + os=-bsd + ;; + -ctix* | -uts*) + os=-sysv + ;; + -nova*) + os=-rtmk-nova + ;; + -ns2 ) + os=-nextstep2 + ;; + -nsk*) + os=-nsk + ;; + # Preserve the version number of sinix5. + -sinix5.*) + os=`echo $os | sed -e 's|sinix|sysv|'` + ;; + -sinix*) + os=-sysv4 + ;; + -tpf*) + os=-tpf + ;; + -triton*) + os=-sysv3 + ;; + -oss*) + os=-sysv3 + ;; + -svr4) + os=-sysv4 + ;; + -svr3) + os=-sysv3 + ;; + -sysvr4) + os=-sysv4 + ;; + # This must come after -sysvr4. + -sysv*) + ;; + -ose*) + os=-ose + ;; + -es1800*) + os=-ose + ;; + -xenix) + os=-xenix + ;; + -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*) + os=-mint + ;; + -aros*) + os=-aros + ;; + -kaos*) + os=-kaos + ;; + -zvmoe) + os=-zvmoe + ;; + -dicos*) + os=-dicos + ;; + -nacl*) + ;; + -none) + ;; + *) + # Get rid of the `-' at the beginning of $os. + os=`echo $os | sed 's/[^-]*-//'` + echo Invalid configuration \`$1\': system \`$os\' not recognized 1>&2 + exit 1 + ;; +esac +else + +# Here we handle the default operating systems that come with various machines. +# The value should be what the vendor currently ships out the door with their +# machine or put another way, the most popular os provided with the machine. + +# Note that if you're going to try to match "-MANUFACTURER" here (say, +# "-sun"), then you have to tell the case statement up towards the top +# that MANUFACTURER isn't an operating system. Otherwise, code above +# will signal an error saying that MANUFACTURER isn't an operating +# system, and we'll never get to this point. + +case $basic_machine in + score-*) + os=-elf + ;; + spu-*) + os=-elf + ;; + *-acorn) + os=-riscix1.2 + ;; + arm*-rebel) + os=-linux + ;; + arm*-semi) + os=-aout + ;; + c4x-* | tic4x-*) + os=-coff + ;; + tic54x-*) + os=-coff + ;; + tic55x-*) + os=-coff + ;; + tic6x-*) + os=-coff + ;; + # This must come before the *-dec entry. + pdp10-*) + os=-tops20 + ;; + pdp11-*) + os=-none + ;; + *-dec | vax-*) + os=-ultrix4.2 + ;; + m68*-apollo) + os=-domain + ;; + i386-sun) + os=-sunos4.0.2 + ;; + m68000-sun) + os=-sunos3 + ;; + m68*-cisco) + os=-aout + ;; + mep-*) + os=-elf + ;; + mips*-cisco) + os=-elf + ;; + mips*-*) + os=-elf + ;; + or32-*) + os=-coff + ;; + *-tti) # must be before sparc entry or we get the wrong os. + os=-sysv3 + ;; + sparc-* | *-sun) + os=-sunos4.1.1 + ;; + *-be) + os=-beos + ;; + *-haiku) + os=-haiku + ;; + *-ibm) + os=-aix + ;; + *-knuth) + os=-mmixware + ;; + *-wec) + os=-proelf + ;; + *-winbond) + os=-proelf + ;; + *-oki) + os=-proelf + ;; + *-hp) + os=-hpux + ;; + *-hitachi) + os=-hiux + ;; + i860-* | *-att | *-ncr | *-altos | *-motorola | *-convergent) + os=-sysv + ;; + *-cbm) + os=-amigaos + ;; + *-dg) + os=-dgux + ;; + *-dolphin) + os=-sysv3 + ;; + m68k-ccur) + os=-rtu + ;; + m88k-omron*) + os=-luna + ;; + *-next ) + os=-nextstep + ;; + *-sequent) + os=-ptx + ;; + *-crds) + os=-unos + ;; + *-ns) + os=-genix + ;; + i370-*) + os=-mvs + ;; + *-next) + os=-nextstep3 + ;; + *-gould) + os=-sysv + ;; + *-highlevel) + os=-bsd + ;; + *-encore) + os=-bsd + ;; + *-sgi) + os=-irix + ;; + *-siemens) + os=-sysv4 + ;; + *-masscomp) + os=-rtu + ;; + f30[01]-fujitsu | f700-fujitsu) + os=-uxpv + ;; + *-rom68k) + os=-coff + ;; + *-*bug) + os=-coff + ;; + *-apple) + os=-macos + ;; + *-atari*) + os=-mint + ;; + *) + os=-none + ;; +esac +fi + +# Here we handle the case where we know the os, and the CPU type, but not the +# manufacturer. We pick the logical manufacturer. +vendor=unknown +case $basic_machine in + *-unknown) + case $os in + -riscix*) + vendor=acorn + ;; + -sunos*) + vendor=sun + ;; + -cnk*|-aix*) + vendor=ibm + ;; + -beos*) + vendor=be + ;; + -hpux*) + vendor=hp + ;; + -mpeix*) + vendor=hp + ;; + -hiux*) + vendor=hitachi + ;; + -unos*) + vendor=crds + ;; + -dgux*) + vendor=dg + ;; + -luna*) + vendor=omron + ;; + -genix*) + vendor=ns + ;; + -mvs* | -opened*) + vendor=ibm + ;; + -os400*) + vendor=ibm + ;; + -ptx*) + vendor=sequent + ;; + -tpf*) + vendor=ibm + ;; + -vxsim* | -vxworks* | -windiss*) + vendor=wrs + ;; + -aux*) + vendor=apple + ;; + -hms*) + vendor=hitachi + ;; + -mpw* | -macos*) + vendor=apple + ;; + -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*) + vendor=atari + ;; + -vos*) + vendor=stratus + ;; + esac + basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"` + ;; +esac + +echo $basic_machine$os +exit + +# Local variables: +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "timestamp='" +# time-stamp-format: "%:y-%02m-%02d" +# time-stamp-end: "'" +# End: ADDED autoconf/configure.ac Index: autoconf/configure.ac ================================================================== --- autoconf/configure.ac +++ autoconf/configure.ac @@ -0,0 +1,108 @@ + +#----------------------------------------------------------------------- +# Supports the following non-standard switches. +# +# --enable-threadsafe +# --enable-readline +# --enable-dynamic-extensions +# + +AC_PREREQ(2.61) +AC_INIT(sqlite, 3.7.5, http://www.sqlite.org) +AC_CONFIG_SRCDIR([sqlite3.c]) + +# Use automake. +AM_INIT_AUTOMAKE([foreign]) + +AC_SYS_LARGEFILE + +# Check for required programs. +AC_PROG_CC +AC_PROG_RANLIB +AC_PROG_LIBTOOL +AC_PROG_MKDIR_P + +# Check for library functions that SQLite can optionally use. +AC_CHECK_FUNCS([fdatasync usleep fullfsync localtime_r gmtime_r]) +AC_FUNC_STRERROR_R + +AC_CONFIG_FILES([Makefile sqlite3.pc]) +AC_SUBST(BUILD_CFLAGS) + +#----------------------------------------------------------------------- +# --enable-readline +# +AC_ARG_ENABLE(readline, [AS_HELP_STRING( + [--enable-readline], + [use readline in shell tool (yes, no) [default=yes]])], + [], [enable_readline=yes]) +if test x"$enable_readline" != xno ; then + sLIBS=$LIBS + LIBS="" + AC_SEARCH_LIBS(tgetent, curses ncurses ncursesw, [], []) + AC_SEARCH_LIBS(readline, readline, [], [enable_readline=no]) + AC_CHECK_FUNCS(readline, [], []) + READLINE_LIBS=$LIBS + LIBS=$sLIBS +fi +AC_SUBST(READLINE_LIBS) +#----------------------------------------------------------------------- + +#----------------------------------------------------------------------- +# --enable-threadsafe +# +AC_ARG_ENABLE(threadsafe, [AS_HELP_STRING( + [--enable-threadsafe], [build a thread-safe library [default=yes]])], + [], [enable_threadsafe=yes]) +THREADSAFE_FLAGS=-DSQLITE_THREADSAFE=0 +if test x"$enable_threadsafe" != "xno"; then + THREADSAFE_FLAGS="-D_REENTRANT=1 -DSQLITE_THREADSAFE=1" + AC_SEARCH_LIBS(pthread_create, pthread) +fi +AC_SUBST(THREADSAFE_FLAGS) +#----------------------------------------------------------------------- + +#----------------------------------------------------------------------- +# --enable-dynamic-extensions +# +AC_ARG_ENABLE(dynamic-extensions, [AS_HELP_STRING( + [--enable-dynamic-extensions], [support loadable extensions [default=yes]])], + [], [enable_dynamic_extensions=yes]) +if test x"$enable_dynamic_extensions" != "xno"; then + AC_SEARCH_LIBS(dlopen, dl) +else + DYNAMIC_EXTENSION_FLAGS=-DSQLITE_OMIT_LOAD_EXTENSION=1 +fi +AC_MSG_CHECKING([for whether to support dynamic extensions]) +AC_MSG_RESULT($enable_dynamic_extensions) +AC_SUBST(DYNAMIC_EXTENSION_FLAGS) +#----------------------------------------------------------------------- + +AC_CHECK_FUNCS(posix_fallocate) + +#----------------------------------------------------------------------- +# UPDATE: Maybe it's better if users just set CFLAGS before invoking +# configure. This option doesn't really add much... +# +# --enable-tempstore +# +# AC_ARG_ENABLE(tempstore, [AS_HELP_STRING( +# [--enable-tempstore], +# [in-memory temporary tables (never, no, yes, always) [default=no]])], +# [], [enable_tempstore=no]) +# AC_MSG_CHECKING([for whether or not to store temp tables in-memory]) +# case "$enable_tempstore" in +# never ) TEMP_STORE=0 ;; +# no ) TEMP_STORE=1 ;; +# always ) TEMP_STORE=3 ;; +# yes ) TEMP_STORE=3 ;; +# * ) +# TEMP_STORE=1 +# enable_tempstore=yes +# ;; +# esac +# AC_MSG_RESULT($enable_tempstore) +# AC_SUBST(TEMP_STORE) +#----------------------------------------------------------------------- + +AC_OUTPUT ADDED autoconf/depcomp Index: autoconf/depcomp ================================================================== --- autoconf/depcomp +++ autoconf/depcomp @@ -0,0 +1,708 @@ +#! /bin/sh +# depcomp - compile a program generating dependencies as side-effects + +scriptversion=2012-03-27.16; # UTC + +# Copyright (C) 1999, 2000, 2003, 2004, 2005, 2006, 2007, 2009, 2010, +# 2011, 2012 Free Software Foundation, Inc. + +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . + +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + +# Originally written by Alexandre Oliva . + +case $1 in + '') + echo "$0: No command. Try '$0 --help' for more information." 1>&2 + exit 1; + ;; + -h | --h*) + cat <<\EOF +Usage: depcomp [--help] [--version] PROGRAM [ARGS] + +Run PROGRAMS ARGS to compile a file, generating dependencies +as side-effects. + +Environment variables: + depmode Dependency tracking mode. + source Source file read by 'PROGRAMS ARGS'. + object Object file output by 'PROGRAMS ARGS'. + DEPDIR directory where to store dependencies. + depfile Dependency file to output. + tmpdepfile Temporary file to use when outputting dependencies. + libtool Whether libtool is used (yes/no). + +Report bugs to . +EOF + exit $? + ;; + -v | --v*) + echo "depcomp $scriptversion" + exit $? + ;; +esac + +# A tabulation character. +tab=' ' +# A newline character. +nl=' +' + +if test -z "$depmode" || test -z "$source" || test -z "$object"; then + echo "depcomp: Variables source, object and depmode must be set" 1>&2 + exit 1 +fi + +# Dependencies for sub/bar.o or sub/bar.obj go into sub/.deps/bar.Po. +depfile=${depfile-`echo "$object" | + sed 's|[^\\/]*$|'${DEPDIR-.deps}'/&|;s|\.\([^.]*\)$|.P\1|;s|Pobj$|Po|'`} +tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`} + +rm -f "$tmpdepfile" + +# Some modes work just like other modes, but use different flags. We +# parameterize here, but still list the modes in the big case below, +# to make depend.m4 easier to write. Note that we *cannot* use a case +# here, because this file can only contain one case statement. +if test "$depmode" = hp; then + # HP compiler uses -M and no extra arg. + gccflag=-M + depmode=gcc +fi + +if test "$depmode" = dashXmstdout; then + # This is just like dashmstdout with a different argument. + dashmflag=-xM + depmode=dashmstdout +fi + +cygpath_u="cygpath -u -f -" +if test "$depmode" = msvcmsys; then + # This is just like msvisualcpp but w/o cygpath translation. + # Just convert the backslash-escaped backslashes to single forward + # slashes to satisfy depend.m4 + cygpath_u='sed s,\\\\,/,g' + depmode=msvisualcpp +fi + +if test "$depmode" = msvc7msys; then + # This is just like msvc7 but w/o cygpath translation. + # Just convert the backslash-escaped backslashes to single forward + # slashes to satisfy depend.m4 + cygpath_u='sed s,\\\\,/,g' + depmode=msvc7 +fi + +if test "$depmode" = xlc; then + # IBM C/C++ Compilers xlc/xlC can output gcc-like dependency informations. + gccflag=-qmakedep=gcc,-MF + depmode=gcc +fi + +case "$depmode" in +gcc3) +## gcc 3 implements dependency tracking that does exactly what +## we want. Yay! Note: for some reason libtool 1.4 doesn't like +## it if -MD -MP comes after the -MF stuff. Hmm. +## Unfortunately, FreeBSD c89 acceptance of flags depends upon +## the command line argument order; so add the flags where they +## appear in depend2.am. Note that the slowdown incurred here +## affects only configure: in makefiles, %FASTDEP% shortcuts this. + for arg + do + case $arg in + -c) set fnord "$@" -MT "$object" -MD -MP -MF "$tmpdepfile" "$arg" ;; + *) set fnord "$@" "$arg" ;; + esac + shift # fnord + shift # $arg + done + "$@" + stat=$? + if test $stat -eq 0; then : + else + rm -f "$tmpdepfile" + exit $stat + fi + mv "$tmpdepfile" "$depfile" + ;; + +gcc) +## There are various ways to get dependency output from gcc. Here's +## why we pick this rather obscure method: +## - Don't want to use -MD because we'd like the dependencies to end +## up in a subdir. Having to rename by hand is ugly. +## (We might end up doing this anyway to support other compilers.) +## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like +## -MM, not -M (despite what the docs say). +## - Using -M directly means running the compiler twice (even worse +## than renaming). + if test -z "$gccflag"; then + gccflag=-MD, + fi + "$@" -Wp,"$gccflag$tmpdepfile" + stat=$? + if test $stat -eq 0; then : + else + rm -f "$tmpdepfile" + exit $stat + fi + rm -f "$depfile" + echo "$object : \\" > "$depfile" + alpha=ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz +## The second -e expression handles DOS-style file names with drive letters. + sed -e 's/^[^:]*: / /' \ + -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile" +## This next piece of magic avoids the "deleted header file" problem. +## The problem is that when a header file which appears in a .P file +## is deleted, the dependency causes make to die (because there is +## typically no way to rebuild the header). We avoid this by adding +## dummy dependencies for each header file. Too bad gcc doesn't do +## this for us directly. + tr ' ' "$nl" < "$tmpdepfile" | +## Some versions of gcc put a space before the ':'. On the theory +## that the space means something, we add a space to the output as +## well. hp depmode also adds that space, but also prefixes the VPATH +## to the object. Take care to not repeat it in the output. +## Some versions of the HPUX 10.20 sed can't process this invocation +## correctly. Breaking it into two sed invocations is a workaround. + sed -e 's/^\\$//' -e '/^$/d' -e "s|.*$object$||" -e '/:$/d' \ + | sed -e 's/$/ :/' >> "$depfile" + rm -f "$tmpdepfile" + ;; + +hp) + # This case exists only to let depend.m4 do its work. It works by + # looking at the text of this script. This case will never be run, + # since it is checked for above. + exit 1 + ;; + +sgi) + if test "$libtool" = yes; then + "$@" "-Wp,-MDupdate,$tmpdepfile" + else + "$@" -MDupdate "$tmpdepfile" + fi + stat=$? + if test $stat -eq 0; then : + else + rm -f "$tmpdepfile" + exit $stat + fi + rm -f "$depfile" + + if test -f "$tmpdepfile"; then # yes, the sourcefile depend on other files + echo "$object : \\" > "$depfile" + + # Clip off the initial element (the dependent). Don't try to be + # clever and replace this with sed code, as IRIX sed won't handle + # lines with more than a fixed number of characters (4096 in + # IRIX 6.2 sed, 8192 in IRIX 6.5). We also remove comment lines; + # the IRIX cc adds comments like '#:fec' to the end of the + # dependency line. + tr ' ' "$nl" < "$tmpdepfile" \ + | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \ + tr "$nl" ' ' >> "$depfile" + echo >> "$depfile" + + # The second pass generates a dummy entry for each header file. + tr ' ' "$nl" < "$tmpdepfile" \ + | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \ + >> "$depfile" + else + # The sourcefile does not contain any dependencies, so just + # store a dummy comment line, to avoid errors with the Makefile + # "include basename.Plo" scheme. + echo "#dummy" > "$depfile" + fi + rm -f "$tmpdepfile" + ;; + +xlc) + # This case exists only to let depend.m4 do its work. It works by + # looking at the text of this script. This case will never be run, + # since it is checked for above. + exit 1 + ;; + +aix) + # The C for AIX Compiler uses -M and outputs the dependencies + # in a .u file. In older versions, this file always lives in the + # current directory. Also, the AIX compiler puts '$object:' at the + # start of each line; $object doesn't have directory information. + # Version 6 uses the directory in both cases. + dir=`echo "$object" | sed -e 's|/[^/]*$|/|'` + test "x$dir" = "x$object" && dir= + base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'` + if test "$libtool" = yes; then + tmpdepfile1=$dir$base.u + tmpdepfile2=$base.u + tmpdepfile3=$dir.libs/$base.u + "$@" -Wc,-M + else + tmpdepfile1=$dir$base.u + tmpdepfile2=$dir$base.u + tmpdepfile3=$dir$base.u + "$@" -M + fi + stat=$? + + if test $stat -eq 0; then : + else + rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" + exit $stat + fi + + for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" + do + test -f "$tmpdepfile" && break + done + if test -f "$tmpdepfile"; then + # Each line is of the form 'foo.o: dependent.h'. + # Do two passes, one to just change these to + # '$object: dependent.h' and one to simply 'dependent.h:'. + sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile" + sed -e 's,^.*\.[a-z]*:['"$tab"' ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile" + else + # The sourcefile does not contain any dependencies, so just + # store a dummy comment line, to avoid errors with the Makefile + # "include basename.Plo" scheme. + echo "#dummy" > "$depfile" + fi + rm -f "$tmpdepfile" + ;; + +icc) + # Intel's C compiler anf tcc (Tiny C Compiler) understand '-MD -MF file'. + # However on + # $CC -MD -MF foo.d -c -o sub/foo.o sub/foo.c + # ICC 7.0 will fill foo.d with something like + # foo.o: sub/foo.c + # foo.o: sub/foo.h + # which is wrong. We want + # sub/foo.o: sub/foo.c + # sub/foo.o: sub/foo.h + # sub/foo.c: + # sub/foo.h: + # ICC 7.1 will output + # foo.o: sub/foo.c sub/foo.h + # and will wrap long lines using '\': + # foo.o: sub/foo.c ... \ + # sub/foo.h ... \ + # ... + # tcc 0.9.26 (FIXME still under development at the moment of writing) + # will emit a similar output, but also prepend the continuation lines + # with horizontal tabulation characters. + "$@" -MD -MF "$tmpdepfile" + stat=$? + if test $stat -eq 0; then : + else + rm -f "$tmpdepfile" + exit $stat + fi + rm -f "$depfile" + # Each line is of the form 'foo.o: dependent.h', + # or 'foo.o: dep1.h dep2.h \', or ' dep3.h dep4.h \'. + # Do two passes, one to just change these to + # '$object: dependent.h' and one to simply 'dependent.h:'. + sed -e "s/^[ $tab][ $tab]*/ /" -e "s,^[^:]*:,$object :," \ + < "$tmpdepfile" > "$depfile" + sed ' + s/[ '"$tab"'][ '"$tab"']*/ /g + s/^ *// + s/ *\\*$// + s/^[^:]*: *// + /^$/d + /:$/d + s/$/ :/ + ' < "$tmpdepfile" >> "$depfile" + rm -f "$tmpdepfile" + ;; + +hp2) + # The "hp" stanza above does not work with aCC (C++) and HP's ia64 + # compilers, which have integrated preprocessors. The correct option + # to use with these is +Maked; it writes dependencies to a file named + # 'foo.d', which lands next to the object file, wherever that + # happens to be. + # Much of this is similar to the tru64 case; see comments there. + dir=`echo "$object" | sed -e 's|/[^/]*$|/|'` + test "x$dir" = "x$object" && dir= + base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'` + if test "$libtool" = yes; then + tmpdepfile1=$dir$base.d + tmpdepfile2=$dir.libs/$base.d + "$@" -Wc,+Maked + else + tmpdepfile1=$dir$base.d + tmpdepfile2=$dir$base.d + "$@" +Maked + fi + stat=$? + if test $stat -eq 0; then : + else + rm -f "$tmpdepfile1" "$tmpdepfile2" + exit $stat + fi + + for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" + do + test -f "$tmpdepfile" && break + done + if test -f "$tmpdepfile"; then + sed -e "s,^.*\.[a-z]*:,$object:," "$tmpdepfile" > "$depfile" + # Add 'dependent.h:' lines. + sed -ne '2,${ + s/^ *// + s/ \\*$// + s/$/:/ + p + }' "$tmpdepfile" >> "$depfile" + else + echo "#dummy" > "$depfile" + fi + rm -f "$tmpdepfile" "$tmpdepfile2" + ;; + +tru64) + # The Tru64 compiler uses -MD to generate dependencies as a side + # effect. 'cc -MD -o foo.o ...' puts the dependencies into 'foo.o.d'. + # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put + # dependencies in 'foo.d' instead, so we check for that too. + # Subdirectories are respected. + dir=`echo "$object" | sed -e 's|/[^/]*$|/|'` + test "x$dir" = "x$object" && dir= + base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'` + + if test "$libtool" = yes; then + # With Tru64 cc, shared objects can also be used to make a + # static library. This mechanism is used in libtool 1.4 series to + # handle both shared and static libraries in a single compilation. + # With libtool 1.4, dependencies were output in $dir.libs/$base.lo.d. + # + # With libtool 1.5 this exception was removed, and libtool now + # generates 2 separate objects for the 2 libraries. These two + # compilations output dependencies in $dir.libs/$base.o.d and + # in $dir$base.o.d. We have to check for both files, because + # one of the two compilations can be disabled. We should prefer + # $dir$base.o.d over $dir.libs/$base.o.d because the latter is + # automatically cleaned when .libs/ is deleted, while ignoring + # the former would cause a distcleancheck panic. + tmpdepfile1=$dir.libs/$base.lo.d # libtool 1.4 + tmpdepfile2=$dir$base.o.d # libtool 1.5 + tmpdepfile3=$dir.libs/$base.o.d # libtool 1.5 + tmpdepfile4=$dir.libs/$base.d # Compaq CCC V6.2-504 + "$@" -Wc,-MD + else + tmpdepfile1=$dir$base.o.d + tmpdepfile2=$dir$base.d + tmpdepfile3=$dir$base.d + tmpdepfile4=$dir$base.d + "$@" -MD + fi + + stat=$? + if test $stat -eq 0; then : + else + rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4" + exit $stat + fi + + for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4" + do + test -f "$tmpdepfile" && break + done + if test -f "$tmpdepfile"; then + sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile" + sed -e 's,^.*\.[a-z]*:['"$tab"' ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile" + else + echo "#dummy" > "$depfile" + fi + rm -f "$tmpdepfile" + ;; + +msvc7) + if test "$libtool" = yes; then + showIncludes=-Wc,-showIncludes + else + showIncludes=-showIncludes + fi + "$@" $showIncludes > "$tmpdepfile" + stat=$? + grep -v '^Note: including file: ' "$tmpdepfile" + if test "$stat" = 0; then : + else + rm -f "$tmpdepfile" + exit $stat + fi + rm -f "$depfile" + echo "$object : \\" > "$depfile" + # The first sed program below extracts the file names and escapes + # backslashes for cygpath. The second sed program outputs the file + # name when reading, but also accumulates all include files in the + # hold buffer in order to output them again at the end. This only + # works with sed implementations that can handle large buffers. + sed < "$tmpdepfile" -n ' +/^Note: including file: *\(.*\)/ { + s//\1/ + s/\\/\\\\/g + p +}' | $cygpath_u | sort -u | sed -n ' +s/ /\\ /g +s/\(.*\)/'"$tab"'\1 \\/p +s/.\(.*\) \\/\1:/ +H +$ { + s/.*/'"$tab"'/ + G + p +}' >> "$depfile" + rm -f "$tmpdepfile" + ;; + +msvc7msys) + # This case exists only to let depend.m4 do its work. It works by + # looking at the text of this script. This case will never be run, + # since it is checked for above. + exit 1 + ;; + +#nosideeffect) + # This comment above is used by automake to tell side-effect + # dependency tracking mechanisms from slower ones. + +dashmstdout) + # Important note: in order to support this mode, a compiler *must* + # always write the preprocessed file to stdout, regardless of -o. + "$@" || exit $? + + # Remove the call to Libtool. + if test "$libtool" = yes; then + while test "X$1" != 'X--mode=compile'; do + shift + done + shift + fi + + # Remove '-o $object'. + IFS=" " + for arg + do + case $arg in + -o) + shift + ;; + $object) + shift + ;; + *) + set fnord "$@" "$arg" + shift # fnord + shift # $arg + ;; + esac + done + + test -z "$dashmflag" && dashmflag=-M + # Require at least two characters before searching for ':' + # in the target name. This is to cope with DOS-style filenames: + # a dependency such as 'c:/foo/bar' could be seen as target 'c' otherwise. + "$@" $dashmflag | + sed 's:^['"$tab"' ]*[^:'"$tab"' ][^:][^:]*\:['"$tab"' ]*:'"$object"'\: :' > "$tmpdepfile" + rm -f "$depfile" + cat < "$tmpdepfile" > "$depfile" + tr ' ' "$nl" < "$tmpdepfile" | \ +## Some versions of the HPUX 10.20 sed can't process this invocation +## correctly. Breaking it into two sed invocations is a workaround. + sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile" + rm -f "$tmpdepfile" + ;; + +dashXmstdout) + # This case only exists to satisfy depend.m4. It is never actually + # run, as this mode is specially recognized in the preamble. + exit 1 + ;; + +makedepend) + "$@" || exit $? + # Remove any Libtool call + if test "$libtool" = yes; then + while test "X$1" != 'X--mode=compile'; do + shift + done + shift + fi + # X makedepend + shift + cleared=no eat=no + for arg + do + case $cleared in + no) + set ""; shift + cleared=yes ;; + esac + if test $eat = yes; then + eat=no + continue + fi + case "$arg" in + -D*|-I*) + set fnord "$@" "$arg"; shift ;; + # Strip any option that makedepend may not understand. Remove + # the object too, otherwise makedepend will parse it as a source file. + -arch) + eat=yes ;; + -*|$object) + ;; + *) + set fnord "$@" "$arg"; shift ;; + esac + done + obj_suffix=`echo "$object" | sed 's/^.*\././'` + touch "$tmpdepfile" + ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@" + rm -f "$depfile" + # makedepend may prepend the VPATH from the source file name to the object. + # No need to regex-escape $object, excess matching of '.' is harmless. + sed "s|^.*\($object *:\)|\1|" "$tmpdepfile" > "$depfile" + sed '1,2d' "$tmpdepfile" | tr ' ' "$nl" | \ +## Some versions of the HPUX 10.20 sed can't process this invocation +## correctly. Breaking it into two sed invocations is a workaround. + sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile" + rm -f "$tmpdepfile" "$tmpdepfile".bak + ;; + +cpp) + # Important note: in order to support this mode, a compiler *must* + # always write the preprocessed file to stdout. + "$@" || exit $? + + # Remove the call to Libtool. + if test "$libtool" = yes; then + while test "X$1" != 'X--mode=compile'; do + shift + done + shift + fi + + # Remove '-o $object'. + IFS=" " + for arg + do + case $arg in + -o) + shift + ;; + $object) + shift + ;; + *) + set fnord "$@" "$arg" + shift # fnord + shift # $arg + ;; + esac + done + + "$@" -E | + sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \ + -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' | + sed '$ s: \\$::' > "$tmpdepfile" + rm -f "$depfile" + echo "$object : \\" > "$depfile" + cat < "$tmpdepfile" >> "$depfile" + sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile" + rm -f "$tmpdepfile" + ;; + +msvisualcpp) + # Important note: in order to support this mode, a compiler *must* + # always write the preprocessed file to stdout. + "$@" || exit $? + + # Remove the call to Libtool. + if test "$libtool" = yes; then + while test "X$1" != 'X--mode=compile'; do + shift + done + shift + fi + + IFS=" " + for arg + do + case "$arg" in + -o) + shift + ;; + $object) + shift + ;; + "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI") + set fnord "$@" + shift + shift + ;; + *) + set fnord "$@" "$arg" + shift + shift + ;; + esac + done + "$@" -E 2>/dev/null | + sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::\1:p' | $cygpath_u | sort -u > "$tmpdepfile" + rm -f "$depfile" + echo "$object : \\" > "$depfile" + sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::'"$tab"'\1 \\:p' >> "$depfile" + echo "$tab" >> "$depfile" + sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::\1\::p' >> "$depfile" + rm -f "$tmpdepfile" + ;; + +msvcmsys) + # This case exists only to let depend.m4 do its work. It works by + # looking at the text of this script. This case will never be run, + # since it is checked for above. + exit 1 + ;; + +none) + exec "$@" + ;; + +*) + echo "Unknown depmode $depmode" 1>&2 + exit 1 + ;; +esac + +exit 0 + +# Local Variables: +# mode: shell-script +# sh-indentation: 2 +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "scriptversion=" +# time-stamp-format: "%:y-%02m-%02d.%02H" +# time-stamp-time-zone: "UTC" +# time-stamp-end: "; # UTC" +# End: ADDED autoconf/install-sh Index: autoconf/install-sh ================================================================== --- autoconf/install-sh +++ autoconf/install-sh @@ -0,0 +1,527 @@ +#!/bin/sh +# install - install a program, script, or datafile + +scriptversion=2011-01-19.21; # UTC + +# This originates from X11R5 (mit/util/scripts/install.sh), which was +# later released in X11R6 (xc/config/util/install.sh) with the +# following copyright and license. +# +# Copyright (C) 1994 X Consortium +# +# Permission is hereby granted, free of charge, to any person obtaining a copy +# of this software and associated documentation files (the "Software"), to +# deal in the Software without restriction, including without limitation the +# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or +# sell copies of the Software, and to permit persons to whom the Software is +# furnished to do so, subject to the following conditions: +# +# The above copyright notice and this permission notice shall be included in +# all copies or substantial portions of the Software. +# +# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE +# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN +# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC- +# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. +# +# Except as contained in this notice, the name of the X Consortium shall not +# be used in advertising or otherwise to promote the sale, use or other deal- +# ings in this Software without prior written authorization from the X Consor- +# tium. +# +# +# FSF changes to this file are in the public domain. +# +# Calling this script install-sh is preferred over install.sh, to prevent +# `make' implicit rules from creating a file called install from it +# when there is no Makefile. +# +# This script is compatible with the BSD install script, but was written +# from scratch. + +nl=' +' +IFS=" "" $nl" + +# set DOITPROG to echo to test this script + +# Don't use :- since 4.3BSD and earlier shells don't like it. +doit=${DOITPROG-} +if test -z "$doit"; then + doit_exec=exec +else + doit_exec=$doit +fi + +# Put in absolute file names if you don't have them in your path; +# or use environment vars. + +chgrpprog=${CHGRPPROG-chgrp} +chmodprog=${CHMODPROG-chmod} +chownprog=${CHOWNPROG-chown} +cmpprog=${CMPPROG-cmp} +cpprog=${CPPROG-cp} +mkdirprog=${MKDIRPROG-mkdir} +mvprog=${MVPROG-mv} +rmprog=${RMPROG-rm} +stripprog=${STRIPPROG-strip} + +posix_glob='?' +initialize_posix_glob=' + test "$posix_glob" != "?" || { + if (set -f) 2>/dev/null; then + posix_glob= + else + posix_glob=: + fi + } +' + +posix_mkdir= + +# Desired mode of installed file. +mode=0755 + +chgrpcmd= +chmodcmd=$chmodprog +chowncmd= +mvcmd=$mvprog +rmcmd="$rmprog -f" +stripcmd= + +src= +dst= +dir_arg= +dst_arg= + +copy_on_change=false +no_target_directory= + +usage="\ +Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE + or: $0 [OPTION]... SRCFILES... DIRECTORY + or: $0 [OPTION]... -t DIRECTORY SRCFILES... + or: $0 [OPTION]... -d DIRECTORIES... + +In the 1st form, copy SRCFILE to DSTFILE. +In the 2nd and 3rd, copy all SRCFILES to DIRECTORY. +In the 4th, create DIRECTORIES. + +Options: + --help display this help and exit. + --version display version info and exit. + + -c (ignored) + -C install only if different (preserve the last data modification time) + -d create directories instead of installing files. + -g GROUP $chgrpprog installed files to GROUP. + -m MODE $chmodprog installed files to MODE. + -o USER $chownprog installed files to USER. + -s $stripprog installed files. + -t DIRECTORY install into DIRECTORY. + -T report an error if DSTFILE is a directory. + +Environment variables override the default commands: + CHGRPPROG CHMODPROG CHOWNPROG CMPPROG CPPROG MKDIRPROG MVPROG + RMPROG STRIPPROG +" + +while test $# -ne 0; do + case $1 in + -c) ;; + + -C) copy_on_change=true;; + + -d) dir_arg=true;; + + -g) chgrpcmd="$chgrpprog $2" + shift;; + + --help) echo "$usage"; exit $?;; + + -m) mode=$2 + case $mode in + *' '* | *' '* | *' +'* | *'*'* | *'?'* | *'['*) + echo "$0: invalid mode: $mode" >&2 + exit 1;; + esac + shift;; + + -o) chowncmd="$chownprog $2" + shift;; + + -s) stripcmd=$stripprog;; + + -t) dst_arg=$2 + # Protect names problematic for `test' and other utilities. + case $dst_arg in + -* | [=\(\)!]) dst_arg=./$dst_arg;; + esac + shift;; + + -T) no_target_directory=true;; + + --version) echo "$0 $scriptversion"; exit $?;; + + --) shift + break;; + + -*) echo "$0: invalid option: $1" >&2 + exit 1;; + + *) break;; + esac + shift +done + +if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then + # When -d is used, all remaining arguments are directories to create. + # When -t is used, the destination is already specified. + # Otherwise, the last argument is the destination. Remove it from $@. + for arg + do + if test -n "$dst_arg"; then + # $@ is not empty: it contains at least $arg. + set fnord "$@" "$dst_arg" + shift # fnord + fi + shift # arg + dst_arg=$arg + # Protect names problematic for `test' and other utilities. + case $dst_arg in + -* | [=\(\)!]) dst_arg=./$dst_arg;; + esac + done +fi + +if test $# -eq 0; then + if test -z "$dir_arg"; then + echo "$0: no input file specified." >&2 + exit 1 + fi + # It's OK to call `install-sh -d' without argument. + # This can happen when creating conditional directories. + exit 0 +fi + +if test -z "$dir_arg"; then + do_exit='(exit $ret); exit $ret' + trap "ret=129; $do_exit" 1 + trap "ret=130; $do_exit" 2 + trap "ret=141; $do_exit" 13 + trap "ret=143; $do_exit" 15 + + # Set umask so as not to create temps with too-generous modes. + # However, 'strip' requires both read and write access to temps. + case $mode in + # Optimize common cases. + *644) cp_umask=133;; + *755) cp_umask=22;; + + *[0-7]) + if test -z "$stripcmd"; then + u_plus_rw= + else + u_plus_rw='% 200' + fi + cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;; + *) + if test -z "$stripcmd"; then + u_plus_rw= + else + u_plus_rw=,u+rw + fi + cp_umask=$mode$u_plus_rw;; + esac +fi + +for src +do + # Protect names problematic for `test' and other utilities. + case $src in + -* | [=\(\)!]) src=./$src;; + esac + + if test -n "$dir_arg"; then + dst=$src + dstdir=$dst + test -d "$dstdir" + dstdir_status=$? + else + + # Waiting for this to be detected by the "$cpprog $src $dsttmp" command + # might cause directories to be created, which would be especially bad + # if $src (and thus $dsttmp) contains '*'. + if test ! -f "$src" && test ! -d "$src"; then + echo "$0: $src does not exist." >&2 + exit 1 + fi + + if test -z "$dst_arg"; then + echo "$0: no destination specified." >&2 + exit 1 + fi + dst=$dst_arg + + # If destination is a directory, append the input filename; won't work + # if double slashes aren't ignored. + if test -d "$dst"; then + if test -n "$no_target_directory"; then + echo "$0: $dst_arg: Is a directory" >&2 + exit 1 + fi + dstdir=$dst + dst=$dstdir/`basename "$src"` + dstdir_status=0 + else + # Prefer dirname, but fall back on a substitute if dirname fails. + dstdir=` + (dirname "$dst") 2>/dev/null || + expr X"$dst" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$dst" : 'X\(//\)[^/]' \| \ + X"$dst" : 'X\(//\)$' \| \ + X"$dst" : 'X\(/\)' \| . 2>/dev/null || + echo X"$dst" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q' + ` + + test -d "$dstdir" + dstdir_status=$? + fi + fi + + obsolete_mkdir_used=false + + if test $dstdir_status != 0; then + case $posix_mkdir in + '') + # Create intermediate dirs using mode 755 as modified by the umask. + # This is like FreeBSD 'install' as of 1997-10-28. + umask=`umask` + case $stripcmd.$umask in + # Optimize common cases. + *[2367][2367]) mkdir_umask=$umask;; + .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;; + + *[0-7]) + mkdir_umask=`expr $umask + 22 \ + - $umask % 100 % 40 + $umask % 20 \ + - $umask % 10 % 4 + $umask % 2 + `;; + *) mkdir_umask=$umask,go-w;; + esac + + # With -d, create the new directory with the user-specified mode. + # Otherwise, rely on $mkdir_umask. + if test -n "$dir_arg"; then + mkdir_mode=-m$mode + else + mkdir_mode= + fi + + posix_mkdir=false + case $umask in + *[123567][0-7][0-7]) + # POSIX mkdir -p sets u+wx bits regardless of umask, which + # is incompatible with FreeBSD 'install' when (umask & 300) != 0. + ;; + *) + tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$ + trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0 + + if (umask $mkdir_umask && + exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1 + then + if test -z "$dir_arg" || { + # Check for POSIX incompatibilities with -m. + # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or + # other-writeable bit of parent directory when it shouldn't. + # FreeBSD 6.1 mkdir -m -p sets mode of existing directory. + ls_ld_tmpdir=`ls -ld "$tmpdir"` + case $ls_ld_tmpdir in + d????-?r-*) different_mode=700;; + d????-?--*) different_mode=755;; + *) false;; + esac && + $mkdirprog -m$different_mode -p -- "$tmpdir" && { + ls_ld_tmpdir_1=`ls -ld "$tmpdir"` + test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1" + } + } + then posix_mkdir=: + fi + rmdir "$tmpdir/d" "$tmpdir" + else + # Remove any dirs left behind by ancient mkdir implementations. + rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null + fi + trap '' 0;; + esac;; + esac + + if + $posix_mkdir && ( + umask $mkdir_umask && + $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir" + ) + then : + else + + # The umask is ridiculous, or mkdir does not conform to POSIX, + # or it failed possibly due to a race condition. Create the + # directory the slow way, step by step, checking for races as we go. + + case $dstdir in + /*) prefix='/';; + [-=\(\)!]*) prefix='./';; + *) prefix='';; + esac + + eval "$initialize_posix_glob" + + oIFS=$IFS + IFS=/ + $posix_glob set -f + set fnord $dstdir + shift + $posix_glob set +f + IFS=$oIFS + + prefixes= + + for d + do + test X"$d" = X && continue + + prefix=$prefix$d + if test -d "$prefix"; then + prefixes= + else + if $posix_mkdir; then + (umask=$mkdir_umask && + $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break + # Don't fail if two instances are running concurrently. + test -d "$prefix" || exit 1 + else + case $prefix in + *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;; + *) qprefix=$prefix;; + esac + prefixes="$prefixes '$qprefix'" + fi + fi + prefix=$prefix/ + done + + if test -n "$prefixes"; then + # Don't fail if two instances are running concurrently. + (umask $mkdir_umask && + eval "\$doit_exec \$mkdirprog $prefixes") || + test -d "$dstdir" || exit 1 + obsolete_mkdir_used=true + fi + fi + fi + + if test -n "$dir_arg"; then + { test -z "$chowncmd" || $doit $chowncmd "$dst"; } && + { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } && + { test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false || + test -z "$chmodcmd" || $doit $chmodcmd $mode "$dst"; } || exit 1 + else + + # Make a couple of temp file names in the proper directory. + dsttmp=$dstdir/_inst.$$_ + rmtmp=$dstdir/_rm.$$_ + + # Trap to clean up those temp files at exit. + trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0 + + # Copy the file name to the temp name. + (umask $cp_umask && $doit_exec $cpprog "$src" "$dsttmp") && + + # and set any options; do chmod last to preserve setuid bits. + # + # If any of these fail, we abort the whole thing. If we want to + # ignore errors from any of these, just make sure not to ignore + # errors from the above "$doit $cpprog $src $dsttmp" command. + # + { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } && + { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } && + { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } && + { test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } && + + # If -C, don't bother to copy if it wouldn't change the file. + if $copy_on_change && + old=`LC_ALL=C ls -dlL "$dst" 2>/dev/null` && + new=`LC_ALL=C ls -dlL "$dsttmp" 2>/dev/null` && + + eval "$initialize_posix_glob" && + $posix_glob set -f && + set X $old && old=:$2:$4:$5:$6 && + set X $new && new=:$2:$4:$5:$6 && + $posix_glob set +f && + + test "$old" = "$new" && + $cmpprog "$dst" "$dsttmp" >/dev/null 2>&1 + then + rm -f "$dsttmp" + else + # Rename the file to the real destination. + $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null || + + # The rename failed, perhaps because mv can't rename something else + # to itself, or perhaps because mv is so ancient that it does not + # support -f. + { + # Now remove or move aside any old file at destination location. + # We try this two ways since rm can't unlink itself on some + # systems and the destination file might be busy for other + # reasons. In this case, the final cleanup might fail but the new + # file should still install successfully. + { + test ! -f "$dst" || + $doit $rmcmd -f "$dst" 2>/dev/null || + { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null && + { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; } + } || + { echo "$0: cannot unlink or rename $dst" >&2 + (exit 1); exit 1 + } + } && + + # Now rename the file to the real destination. + $doit $mvcmd "$dsttmp" "$dst" + } + fi || exit 1 + + trap '' 0 + fi +done + +# Local variables: +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "scriptversion=" +# time-stamp-format: "%:y-%02m-%02d.%02H" +# time-stamp-time-zone: "UTC" +# time-stamp-end: "; # UTC" +# End: ADDED autoconf/ltmain.sh Index: autoconf/ltmain.sh ================================================================== --- autoconf/ltmain.sh +++ autoconf/ltmain.sh @@ -0,0 +1,9655 @@ + +# libtool (GNU libtool) 2.4.2 +# Written by Gordon Matzigkeit , 1996 + +# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006, +# 2007, 2008, 2009, 2010, 2011 Free Software Foundation, Inc. +# This is free software; see the source for copying conditions. There is NO +# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + +# GNU Libtool is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# As a special exception to the GNU General Public License, +# if you distribute this file as part of a program or library that +# is built using GNU Libtool, you may include this file under the +# same distribution terms that you use for the rest of that program. +# +# GNU Libtool is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with GNU Libtool; see the file COPYING. If not, a copy +# can be downloaded from http://www.gnu.org/licenses/gpl.html, +# or obtained by writing to the Free Software Foundation, Inc., +# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + +# Usage: $progname [OPTION]... [MODE-ARG]... +# +# Provide generalized library-building support services. +# +# --config show all configuration variables +# --debug enable verbose shell tracing +# -n, --dry-run display commands without modifying any files +# --features display basic configuration information and exit +# --mode=MODE use operation mode MODE +# --preserve-dup-deps don't remove duplicate dependency libraries +# --quiet, --silent don't print informational messages +# --no-quiet, --no-silent +# print informational messages (default) +# --no-warn don't display warning messages +# --tag=TAG use configuration variables from tag TAG +# -v, --verbose print more informational messages than default +# --no-verbose don't print the extra informational messages +# --version print version information +# -h, --help, --help-all print short, long, or detailed help message +# +# MODE must be one of the following: +# +# clean remove files from the build directory +# compile compile a source file into a libtool object +# execute automatically set library path, then run a program +# finish complete the installation of libtool libraries +# install install libraries or executables +# link create a library or an executable +# uninstall remove libraries from an installed directory +# +# MODE-ARGS vary depending on the MODE. When passed as first option, +# `--mode=MODE' may be abbreviated as `MODE' or a unique abbreviation of that. +# Try `$progname --help --mode=MODE' for a more detailed description of MODE. +# +# When reporting a bug, please describe a test case to reproduce it and +# include the following information: +# +# host-triplet: $host +# shell: $SHELL +# compiler: $LTCC +# compiler flags: $LTCFLAGS +# linker: $LD (gnu? $with_gnu_ld) +# $progname: (GNU libtool) 2.4.2 +# automake: $automake_version +# autoconf: $autoconf_version +# +# Report bugs to . +# GNU libtool home page: . +# General help using GNU software: . + +PROGRAM=libtool +PACKAGE=libtool +VERSION=2.4.2 +TIMESTAMP="" +package_revision=1.3337 + +# Be Bourne compatible +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then + emulate sh + NULLCMD=: + # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' + setopt NO_GLOB_SUBST +else + case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac +fi +BIN_SH=xpg4; export BIN_SH # for Tru64 +DUALCASE=1; export DUALCASE # for MKS sh + +# A function that is used when there is no print builtin or printf. +func_fallback_echo () +{ + eval 'cat <<_LTECHO_EOF +$1 +_LTECHO_EOF' +} + +# NLS nuisances: We save the old values to restore during execute mode. +lt_user_locale= +lt_safe_locale= +for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES +do + eval "if test \"\${$lt_var+set}\" = set; then + save_$lt_var=\$$lt_var + $lt_var=C + export $lt_var + lt_user_locale=\"$lt_var=\\\$save_\$lt_var; \$lt_user_locale\" + lt_safe_locale=\"$lt_var=C; \$lt_safe_locale\" + fi" +done +LC_ALL=C +LANGUAGE=C +export LANGUAGE LC_ALL + +$lt_unset CDPATH + + +# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh +# is ksh but when the shell is invoked as "sh" and the current value of +# the _XPG environment variable is not equal to 1 (one), the special +# positional parameter $0, within a function call, is the name of the +# function. +progpath="$0" + + + +: ${CP="cp -f"} +test "${ECHO+set}" = set || ECHO=${as_echo-'printf %s\n'} +: ${MAKE="make"} +: ${MKDIR="mkdir"} +: ${MV="mv -f"} +: ${RM="rm -f"} +: ${SHELL="${CONFIG_SHELL-/bin/sh}"} +: ${Xsed="$SED -e 1s/^X//"} + +# Global variables: +EXIT_SUCCESS=0 +EXIT_FAILURE=1 +EXIT_MISMATCH=63 # $? = 63 is used to indicate version mismatch to missing. +EXIT_SKIP=77 # $? = 77 is used to indicate a skipped test to automake. + +exit_status=$EXIT_SUCCESS + +# Make sure IFS has a sensible default +lt_nl=' +' +IFS=" $lt_nl" + +dirname="s,/[^/]*$,," +basename="s,^.*/,," + +# func_dirname file append nondir_replacement +# Compute the dirname of FILE. If nonempty, add APPEND to the result, +# otherwise set result to NONDIR_REPLACEMENT. +func_dirname () +{ + func_dirname_result=`$ECHO "${1}" | $SED "$dirname"` + if test "X$func_dirname_result" = "X${1}"; then + func_dirname_result="${3}" + else + func_dirname_result="$func_dirname_result${2}" + fi +} # func_dirname may be replaced by extended shell implementation + + +# func_basename file +func_basename () +{ + func_basename_result=`$ECHO "${1}" | $SED "$basename"` +} # func_basename may be replaced by extended shell implementation + + +# func_dirname_and_basename file append nondir_replacement +# perform func_basename and func_dirname in a single function +# call: +# dirname: Compute the dirname of FILE. If nonempty, +# add APPEND to the result, otherwise set result +# to NONDIR_REPLACEMENT. +# value returned in "$func_dirname_result" +# basename: Compute filename of FILE. +# value retuned in "$func_basename_result" +# Implementation must be kept synchronized with func_dirname +# and func_basename. For efficiency, we do not delegate to +# those functions but instead duplicate the functionality here. +func_dirname_and_basename () +{ + # Extract subdirectory from the argument. + func_dirname_result=`$ECHO "${1}" | $SED -e "$dirname"` + if test "X$func_dirname_result" = "X${1}"; then + func_dirname_result="${3}" + else + func_dirname_result="$func_dirname_result${2}" + fi + func_basename_result=`$ECHO "${1}" | $SED -e "$basename"` +} # func_dirname_and_basename may be replaced by extended shell implementation + + +# func_stripname prefix suffix name +# strip PREFIX and SUFFIX off of NAME. +# PREFIX and SUFFIX must not contain globbing or regex special +# characters, hashes, percent signs, but SUFFIX may contain a leading +# dot (in which case that matches only a dot). +# func_strip_suffix prefix name +func_stripname () +{ + case ${2} in + .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;; + *) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;; + esac +} # func_stripname may be replaced by extended shell implementation + + +# These SED scripts presuppose an absolute path with a trailing slash. +pathcar='s,^/\([^/]*\).*$,\1,' +pathcdr='s,^/[^/]*,,' +removedotparts=':dotsl + s@/\./@/@g + t dotsl + s,/\.$,/,' +collapseslashes='s@/\{1,\}@/@g' +finalslash='s,/*$,/,' + +# func_normal_abspath PATH +# Remove doubled-up and trailing slashes, "." path components, +# and cancel out any ".." path components in PATH after making +# it an absolute path. +# value returned in "$func_normal_abspath_result" +func_normal_abspath () +{ + # Start from root dir and reassemble the path. + func_normal_abspath_result= + func_normal_abspath_tpath=$1 + func_normal_abspath_altnamespace= + case $func_normal_abspath_tpath in + "") + # Empty path, that just means $cwd. + func_stripname '' '/' "`pwd`" + func_normal_abspath_result=$func_stripname_result + return + ;; + # The next three entries are used to spot a run of precisely + # two leading slashes without using negated character classes; + # we take advantage of case's first-match behaviour. + ///*) + # Unusual form of absolute path, do nothing. + ;; + //*) + # Not necessarily an ordinary path; POSIX reserves leading '//' + # and for example Cygwin uses it to access remote file shares + # over CIFS/SMB, so we conserve a leading double slash if found. + func_normal_abspath_altnamespace=/ + ;; + /*) + # Absolute path, do nothing. + ;; + *) + # Relative path, prepend $cwd. + func_normal_abspath_tpath=`pwd`/$func_normal_abspath_tpath + ;; + esac + # Cancel out all the simple stuff to save iterations. We also want + # the path to end with a slash for ease of parsing, so make sure + # there is one (and only one) here. + func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \ + -e "$removedotparts" -e "$collapseslashes" -e "$finalslash"` + while :; do + # Processed it all yet? + if test "$func_normal_abspath_tpath" = / ; then + # If we ascended to the root using ".." the result may be empty now. + if test -z "$func_normal_abspath_result" ; then + func_normal_abspath_result=/ + fi + break + fi + func_normal_abspath_tcomponent=`$ECHO "$func_normal_abspath_tpath" | $SED \ + -e "$pathcar"` + func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \ + -e "$pathcdr"` + # Figure out what to do with it + case $func_normal_abspath_tcomponent in + "") + # Trailing empty path component, ignore it. + ;; + ..) + # Parent dir; strip last assembled component from result. + func_dirname "$func_normal_abspath_result" + func_normal_abspath_result=$func_dirname_result + ;; + *) + # Actual path component, append it. + func_normal_abspath_result=$func_normal_abspath_result/$func_normal_abspath_tcomponent + ;; + esac + done + # Restore leading double-slash if one was found on entry. + func_normal_abspath_result=$func_normal_abspath_altnamespace$func_normal_abspath_result +} + +# func_relative_path SRCDIR DSTDIR +# generates a relative path from SRCDIR to DSTDIR, with a trailing +# slash if non-empty, suitable for immediately appending a filename +# without needing to append a separator. +# value returned in "$func_relative_path_result" +func_relative_path () +{ + func_relative_path_result= + func_normal_abspath "$1" + func_relative_path_tlibdir=$func_normal_abspath_result + func_normal_abspath "$2" + func_relative_path_tbindir=$func_normal_abspath_result + + # Ascend the tree starting from libdir + while :; do + # check if we have found a prefix of bindir + case $func_relative_path_tbindir in + $func_relative_path_tlibdir) + # found an exact match + func_relative_path_tcancelled= + break + ;; + $func_relative_path_tlibdir*) + # found a matching prefix + func_stripname "$func_relative_path_tlibdir" '' "$func_relative_path_tbindir" + func_relative_path_tcancelled=$func_stripname_result + if test -z "$func_relative_path_result"; then + func_relative_path_result=. + fi + break + ;; + *) + func_dirname $func_relative_path_tlibdir + func_relative_path_tlibdir=${func_dirname_result} + if test "x$func_relative_path_tlibdir" = x ; then + # Have to descend all the way to the root! + func_relative_path_result=../$func_relative_path_result + func_relative_path_tcancelled=$func_relative_path_tbindir + break + fi + func_relative_path_result=../$func_relative_path_result + ;; + esac + done + + # Now calculate path; take care to avoid doubling-up slashes. + func_stripname '' '/' "$func_relative_path_result" + func_relative_path_result=$func_stripname_result + func_stripname '/' '/' "$func_relative_path_tcancelled" + if test "x$func_stripname_result" != x ; then + func_relative_path_result=${func_relative_path_result}/${func_stripname_result} + fi + + # Normalisation. If bindir is libdir, return empty string, + # else relative path ending with a slash; either way, target + # file name can be directly appended. + if test ! -z "$func_relative_path_result"; then + func_stripname './' '' "$func_relative_path_result/" + func_relative_path_result=$func_stripname_result + fi +} + +# The name of this program: +func_dirname_and_basename "$progpath" +progname=$func_basename_result + +# Make sure we have an absolute path for reexecution: +case $progpath in + [\\/]*|[A-Za-z]:\\*) ;; + *[\\/]*) + progdir=$func_dirname_result + progdir=`cd "$progdir" && pwd` + progpath="$progdir/$progname" + ;; + *) + save_IFS="$IFS" + IFS=${PATH_SEPARATOR-:} + for progdir in $PATH; do + IFS="$save_IFS" + test -x "$progdir/$progname" && break + done + IFS="$save_IFS" + test -n "$progdir" || progdir=`pwd` + progpath="$progdir/$progname" + ;; +esac + +# Sed substitution that helps us do robust quoting. It backslashifies +# metacharacters that are still active within double-quoted strings. +Xsed="${SED}"' -e 1s/^X//' +sed_quote_subst='s/\([`"$\\]\)/\\\1/g' + +# Same as above, but do not quote variable references. +double_quote_subst='s/\(["`\\]\)/\\\1/g' + +# Sed substitution that turns a string into a regex matching for the +# string literally. +sed_make_literal_regex='s,[].[^$\\*\/],\\&,g' + +# Sed substitution that converts a w32 file name or path +# which contains forward slashes, into one that contains +# (escaped) backslashes. A very naive implementation. +lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g' + +# Re-`\' parameter expansions in output of double_quote_subst that were +# `\'-ed in input to the same. If an odd number of `\' preceded a '$' +# in input to double_quote_subst, that '$' was protected from expansion. +# Since each input `\' is now two `\'s, look for any number of runs of +# four `\'s followed by two `\'s and then a '$'. `\' that '$'. +bs='\\' +bs2='\\\\' +bs4='\\\\\\\\' +dollar='\$' +sed_double_backslash="\ + s/$bs4/&\\ +/g + s/^$bs2$dollar/$bs&/ + s/\\([^$bs]\\)$bs2$dollar/\\1$bs2$bs$dollar/g + s/\n//g" + +# Standard options: +opt_dry_run=false +opt_help=false +opt_quiet=false +opt_verbose=false +opt_warning=: + +# func_echo arg... +# Echo program name prefixed message, along with the current mode +# name if it has been set yet. +func_echo () +{ + $ECHO "$progname: ${opt_mode+$opt_mode: }$*" +} + +# func_verbose arg... +# Echo program name prefixed message in verbose mode only. +func_verbose () +{ + $opt_verbose && func_echo ${1+"$@"} + + # A bug in bash halts the script if the last line of a function + # fails when set -e is in force, so we need another command to + # work around that: + : +} + +# func_echo_all arg... +# Invoke $ECHO with all args, space-separated. +func_echo_all () +{ + $ECHO "$*" +} + +# func_error arg... +# Echo program name prefixed message to standard error. +func_error () +{ + $ECHO "$progname: ${opt_mode+$opt_mode: }"${1+"$@"} 1>&2 +} + +# func_warning arg... +# Echo program name prefixed warning message to standard error. +func_warning () +{ + $opt_warning && $ECHO "$progname: ${opt_mode+$opt_mode: }warning: "${1+"$@"} 1>&2 + + # bash bug again: + : +} + +# func_fatal_error arg... +# Echo program name prefixed message to standard error, and exit. +func_fatal_error () +{ + func_error ${1+"$@"} + exit $EXIT_FAILURE +} + +# func_fatal_help arg... +# Echo program name prefixed message to standard error, followed by +# a help hint, and exit. +func_fatal_help () +{ + func_error ${1+"$@"} + func_fatal_error "$help" +} +help="Try \`$progname --help' for more information." ## default + + +# func_grep expression filename +# Check whether EXPRESSION matches any line of FILENAME, without output. +func_grep () +{ + $GREP "$1" "$2" >/dev/null 2>&1 +} + + +# func_mkdir_p directory-path +# Make sure the entire path to DIRECTORY-PATH is available. +func_mkdir_p () +{ + my_directory_path="$1" + my_dir_list= + + if test -n "$my_directory_path" && test "$opt_dry_run" != ":"; then + + # Protect directory names starting with `-' + case $my_directory_path in + -*) my_directory_path="./$my_directory_path" ;; + esac + + # While some portion of DIR does not yet exist... + while test ! -d "$my_directory_path"; do + # ...make a list in topmost first order. Use a colon delimited + # list incase some portion of path contains whitespace. + my_dir_list="$my_directory_path:$my_dir_list" + + # If the last portion added has no slash in it, the list is done + case $my_directory_path in */*) ;; *) break ;; esac + + # ...otherwise throw away the child directory and loop + my_directory_path=`$ECHO "$my_directory_path" | $SED -e "$dirname"` + done + my_dir_list=`$ECHO "$my_dir_list" | $SED 's,:*$,,'` + + save_mkdir_p_IFS="$IFS"; IFS=':' + for my_dir in $my_dir_list; do + IFS="$save_mkdir_p_IFS" + # mkdir can fail with a `File exist' error if two processes + # try to create one of the directories concurrently. Don't + # stop in that case! + $MKDIR "$my_dir" 2>/dev/null || : + done + IFS="$save_mkdir_p_IFS" + + # Bail out if we (or some other process) failed to create a directory. + test -d "$my_directory_path" || \ + func_fatal_error "Failed to create \`$1'" + fi +} + + +# func_mktempdir [string] +# Make a temporary directory that won't clash with other running +# libtool processes, and avoids race conditions if possible. If +# given, STRING is the basename for that directory. +func_mktempdir () +{ + my_template="${TMPDIR-/tmp}/${1-$progname}" + + if test "$opt_dry_run" = ":"; then + # Return a directory name, but don't create it in dry-run mode + my_tmpdir="${my_template}-$$" + else + + # If mktemp works, use that first and foremost + my_tmpdir=`mktemp -d "${my_template}-XXXXXXXX" 2>/dev/null` + + if test ! -d "$my_tmpdir"; then + # Failing that, at least try and use $RANDOM to avoid a race + my_tmpdir="${my_template}-${RANDOM-0}$$" + + save_mktempdir_umask=`umask` + umask 0077 + $MKDIR "$my_tmpdir" + umask $save_mktempdir_umask + fi + + # If we're not in dry-run mode, bomb out on failure + test -d "$my_tmpdir" || \ + func_fatal_error "cannot create temporary directory \`$my_tmpdir'" + fi + + $ECHO "$my_tmpdir" +} + + +# func_quote_for_eval arg +# Aesthetically quote ARG to be evaled later. +# This function returns two values: FUNC_QUOTE_FOR_EVAL_RESULT +# is double-quoted, suitable for a subsequent eval, whereas +# FUNC_QUOTE_FOR_EVAL_UNQUOTED_RESULT has merely all characters +# which are still active within double quotes backslashified. +func_quote_for_eval () +{ + case $1 in + *[\\\`\"\$]*) + func_quote_for_eval_unquoted_result=`$ECHO "$1" | $SED "$sed_quote_subst"` ;; + *) + func_quote_for_eval_unquoted_result="$1" ;; + esac + + case $func_quote_for_eval_unquoted_result in + # Double-quote args containing shell metacharacters to delay + # word splitting, command substitution and and variable + # expansion for a subsequent eval. + # Many Bourne shells cannot handle close brackets correctly + # in scan sets, so we specify it separately. + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + func_quote_for_eval_result="\"$func_quote_for_eval_unquoted_result\"" + ;; + *) + func_quote_for_eval_result="$func_quote_for_eval_unquoted_result" + esac +} + + +# func_quote_for_expand arg +# Aesthetically quote ARG to be evaled later; same as above, +# but do not quote variable references. +func_quote_for_expand () +{ + case $1 in + *[\\\`\"]*) + my_arg=`$ECHO "$1" | $SED \ + -e "$double_quote_subst" -e "$sed_double_backslash"` ;; + *) + my_arg="$1" ;; + esac + + case $my_arg in + # Double-quote args containing shell metacharacters to delay + # word splitting and command substitution for a subsequent eval. + # Many Bourne shells cannot handle close brackets correctly + # in scan sets, so we specify it separately. + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + my_arg="\"$my_arg\"" + ;; + esac + + func_quote_for_expand_result="$my_arg" +} + + +# func_show_eval cmd [fail_exp] +# Unless opt_silent is true, then output CMD. Then, if opt_dryrun is +# not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP +# is given, then evaluate it. +func_show_eval () +{ + my_cmd="$1" + my_fail_exp="${2-:}" + + ${opt_silent-false} || { + func_quote_for_expand "$my_cmd" + eval "func_echo $func_quote_for_expand_result" + } + + if ${opt_dry_run-false}; then :; else + eval "$my_cmd" + my_status=$? + if test "$my_status" -eq 0; then :; else + eval "(exit $my_status); $my_fail_exp" + fi + fi +} + + +# func_show_eval_locale cmd [fail_exp] +# Unless opt_silent is true, then output CMD. Then, if opt_dryrun is +# not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP +# is given, then evaluate it. Use the saved locale for evaluation. +func_show_eval_locale () +{ + my_cmd="$1" + my_fail_exp="${2-:}" + + ${opt_silent-false} || { + func_quote_for_expand "$my_cmd" + eval "func_echo $func_quote_for_expand_result" + } + + if ${opt_dry_run-false}; then :; else + eval "$lt_user_locale + $my_cmd" + my_status=$? + eval "$lt_safe_locale" + if test "$my_status" -eq 0; then :; else + eval "(exit $my_status); $my_fail_exp" + fi + fi +} + +# func_tr_sh +# Turn $1 into a string suitable for a shell variable name. +# Result is stored in $func_tr_sh_result. All characters +# not in the set a-zA-Z0-9_ are replaced with '_'. Further, +# if $1 begins with a digit, a '_' is prepended as well. +func_tr_sh () +{ + case $1 in + [0-9]* | *[!a-zA-Z0-9_]*) + func_tr_sh_result=`$ECHO "$1" | $SED 's/^\([0-9]\)/_\1/; s/[^a-zA-Z0-9_]/_/g'` + ;; + * ) + func_tr_sh_result=$1 + ;; + esac +} + + +# func_version +# Echo version message to standard output and exit. +func_version () +{ + $opt_debug + + $SED -n '/(C)/!b go + :more + /\./!{ + N + s/\n# / / + b more + } + :go + /^# '$PROGRAM' (GNU /,/# warranty; / { + s/^# // + s/^# *$// + s/\((C)\)[ 0-9,-]*\( [1-9][0-9]*\)/\1\2/ + p + }' < "$progpath" + exit $? +} + +# func_usage +# Echo short help message to standard output and exit. +func_usage () +{ + $opt_debug + + $SED -n '/^# Usage:/,/^# *.*--help/ { + s/^# // + s/^# *$// + s/\$progname/'$progname'/ + p + }' < "$progpath" + echo + $ECHO "run \`$progname --help | more' for full usage" + exit $? +} + +# func_help [NOEXIT] +# Echo long help message to standard output and exit, +# unless 'noexit' is passed as argument. +func_help () +{ + $opt_debug + + $SED -n '/^# Usage:/,/# Report bugs to/ { + :print + s/^# // + s/^# *$// + s*\$progname*'$progname'* + s*\$host*'"$host"'* + s*\$SHELL*'"$SHELL"'* + s*\$LTCC*'"$LTCC"'* + s*\$LTCFLAGS*'"$LTCFLAGS"'* + s*\$LD*'"$LD"'* + s/\$with_gnu_ld/'"$with_gnu_ld"'/ + s/\$automake_version/'"`(${AUTOMAKE-automake} --version) 2>/dev/null |$SED 1q`"'/ + s/\$autoconf_version/'"`(${AUTOCONF-autoconf} --version) 2>/dev/null |$SED 1q`"'/ + p + d + } + /^# .* home page:/b print + /^# General help using/b print + ' < "$progpath" + ret=$? + if test -z "$1"; then + exit $ret + fi +} + +# func_missing_arg argname +# Echo program name prefixed message to standard error and set global +# exit_cmd. +func_missing_arg () +{ + $opt_debug + + func_error "missing argument for $1." + exit_cmd=exit +} + + +# func_split_short_opt shortopt +# Set func_split_short_opt_name and func_split_short_opt_arg shell +# variables after splitting SHORTOPT after the 2nd character. +func_split_short_opt () +{ + my_sed_short_opt='1s/^\(..\).*$/\1/;q' + my_sed_short_rest='1s/^..\(.*\)$/\1/;q' + + func_split_short_opt_name=`$ECHO "$1" | $SED "$my_sed_short_opt"` + func_split_short_opt_arg=`$ECHO "$1" | $SED "$my_sed_short_rest"` +} # func_split_short_opt may be replaced by extended shell implementation + + +# func_split_long_opt longopt +# Set func_split_long_opt_name and func_split_long_opt_arg shell +# variables after splitting LONGOPT at the `=' sign. +func_split_long_opt () +{ + my_sed_long_opt='1s/^\(--[^=]*\)=.*/\1/;q' + my_sed_long_arg='1s/^--[^=]*=//' + + func_split_long_opt_name=`$ECHO "$1" | $SED "$my_sed_long_opt"` + func_split_long_opt_arg=`$ECHO "$1" | $SED "$my_sed_long_arg"` +} # func_split_long_opt may be replaced by extended shell implementation + +exit_cmd=: + + + + + +magic="%%%MAGIC variable%%%" +magic_exe="%%%MAGIC EXE variable%%%" + +# Global variables. +nonopt= +preserve_args= +lo2o="s/\\.lo\$/.${objext}/" +o2lo="s/\\.${objext}\$/.lo/" +extracted_archives= +extracted_serial=0 + +# If this variable is set in any of the actions, the command in it +# will be execed at the end. This prevents here-documents from being +# left over by shells. +exec_cmd= + +# func_append var value +# Append VALUE to the end of shell variable VAR. +func_append () +{ + eval "${1}=\$${1}\${2}" +} # func_append may be replaced by extended shell implementation + +# func_append_quoted var value +# Quote VALUE and append to the end of shell variable VAR, separated +# by a space. +func_append_quoted () +{ + func_quote_for_eval "${2}" + eval "${1}=\$${1}\\ \$func_quote_for_eval_result" +} # func_append_quoted may be replaced by extended shell implementation + + +# func_arith arithmetic-term... +func_arith () +{ + func_arith_result=`expr "${@}"` +} # func_arith may be replaced by extended shell implementation + + +# func_len string +# STRING may not start with a hyphen. +func_len () +{ + func_len_result=`expr "${1}" : ".*" 2>/dev/null || echo $max_cmd_len` +} # func_len may be replaced by extended shell implementation + + +# func_lo2o object +func_lo2o () +{ + func_lo2o_result=`$ECHO "${1}" | $SED "$lo2o"` +} # func_lo2o may be replaced by extended shell implementation + + +# func_xform libobj-or-source +func_xform () +{ + func_xform_result=`$ECHO "${1}" | $SED 's/\.[^.]*$/.lo/'` +} # func_xform may be replaced by extended shell implementation + + +# func_fatal_configuration arg... +# Echo program name prefixed message to standard error, followed by +# a configuration failure hint, and exit. +func_fatal_configuration () +{ + func_error ${1+"$@"} + func_error "See the $PACKAGE documentation for more information." + func_fatal_error "Fatal configuration error." +} + + +# func_config +# Display the configuration for all the tags in this script. +func_config () +{ + re_begincf='^# ### BEGIN LIBTOOL' + re_endcf='^# ### END LIBTOOL' + + # Default configuration. + $SED "1,/$re_begincf CONFIG/d;/$re_endcf CONFIG/,\$d" < "$progpath" + + # Now print the configurations for the tags. + for tagname in $taglist; do + $SED -n "/$re_begincf TAG CONFIG: $tagname\$/,/$re_endcf TAG CONFIG: $tagname\$/p" < "$progpath" + done + + exit $? +} + +# func_features +# Display the features supported by this script. +func_features () +{ + echo "host: $host" + if test "$build_libtool_libs" = yes; then + echo "enable shared libraries" + else + echo "disable shared libraries" + fi + if test "$build_old_libs" = yes; then + echo "enable static libraries" + else + echo "disable static libraries" + fi + + exit $? +} + +# func_enable_tag tagname +# Verify that TAGNAME is valid, and either flag an error and exit, or +# enable the TAGNAME tag. We also add TAGNAME to the global $taglist +# variable here. +func_enable_tag () +{ + # Global variable: + tagname="$1" + + re_begincf="^# ### BEGIN LIBTOOL TAG CONFIG: $tagname\$" + re_endcf="^# ### END LIBTOOL TAG CONFIG: $tagname\$" + sed_extractcf="/$re_begincf/,/$re_endcf/p" + + # Validate tagname. + case $tagname in + *[!-_A-Za-z0-9,/]*) + func_fatal_error "invalid tag name: $tagname" + ;; + esac + + # Don't test for the "default" C tag, as we know it's + # there but not specially marked. + case $tagname in + CC) ;; + *) + if $GREP "$re_begincf" "$progpath" >/dev/null 2>&1; then + taglist="$taglist $tagname" + + # Evaluate the configuration. Be careful to quote the path + # and the sed script, to avoid splitting on whitespace, but + # also don't use non-portable quotes within backquotes within + # quotes we have to do it in 2 steps: + extractedcf=`$SED -n -e "$sed_extractcf" < "$progpath"` + eval "$extractedcf" + else + func_error "ignoring unknown tag $tagname" + fi + ;; + esac +} + +# func_check_version_match +# Ensure that we are using m4 macros, and libtool script from the same +# release of libtool. +func_check_version_match () +{ + if test "$package_revision" != "$macro_revision"; then + if test "$VERSION" != "$macro_version"; then + if test -z "$macro_version"; then + cat >&2 <<_LT_EOF +$progname: Version mismatch error. This is $PACKAGE $VERSION, but the +$progname: definition of this LT_INIT comes from an older release. +$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION +$progname: and run autoconf again. +_LT_EOF + else + cat >&2 <<_LT_EOF +$progname: Version mismatch error. This is $PACKAGE $VERSION, but the +$progname: definition of this LT_INIT comes from $PACKAGE $macro_version. +$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION +$progname: and run autoconf again. +_LT_EOF + fi + else + cat >&2 <<_LT_EOF +$progname: Version mismatch error. This is $PACKAGE $VERSION, revision $package_revision, +$progname: but the definition of this LT_INIT comes from revision $macro_revision. +$progname: You should recreate aclocal.m4 with macros from revision $package_revision +$progname: of $PACKAGE $VERSION and run autoconf again. +_LT_EOF + fi + + exit $EXIT_MISMATCH + fi +} + + +# Shorthand for --mode=foo, only valid as the first argument +case $1 in +clean|clea|cle|cl) + shift; set dummy --mode clean ${1+"$@"}; shift + ;; +compile|compil|compi|comp|com|co|c) + shift; set dummy --mode compile ${1+"$@"}; shift + ;; +execute|execut|execu|exec|exe|ex|e) + shift; set dummy --mode execute ${1+"$@"}; shift + ;; +finish|finis|fini|fin|fi|f) + shift; set dummy --mode finish ${1+"$@"}; shift + ;; +install|instal|insta|inst|ins|in|i) + shift; set dummy --mode install ${1+"$@"}; shift + ;; +link|lin|li|l) + shift; set dummy --mode link ${1+"$@"}; shift + ;; +uninstall|uninstal|uninsta|uninst|unins|unin|uni|un|u) + shift; set dummy --mode uninstall ${1+"$@"}; shift + ;; +esac + + + +# Option defaults: +opt_debug=: +opt_dry_run=false +opt_config=false +opt_preserve_dup_deps=false +opt_features=false +opt_finish=false +opt_help=false +opt_help_all=false +opt_silent=: +opt_warning=: +opt_verbose=: +opt_silent=false +opt_verbose=false + + +# Parse options once, thoroughly. This comes as soon as possible in the +# script to make things like `--version' happen as quickly as we can. +{ + # this just eases exit handling + while test $# -gt 0; do + opt="$1" + shift + case $opt in + --debug|-x) opt_debug='set -x' + func_echo "enabling shell trace mode" + $opt_debug + ;; + --dry-run|--dryrun|-n) + opt_dry_run=: + ;; + --config) + opt_config=: +func_config + ;; + --dlopen|-dlopen) + optarg="$1" + opt_dlopen="${opt_dlopen+$opt_dlopen +}$optarg" + shift + ;; + --preserve-dup-deps) + opt_preserve_dup_deps=: + ;; + --features) + opt_features=: +func_features + ;; + --finish) + opt_finish=: +set dummy --mode finish ${1+"$@"}; shift + ;; + --help) + opt_help=: + ;; + --help-all) + opt_help_all=: +opt_help=': help-all' + ;; + --mode) + test $# = 0 && func_missing_arg $opt && break + optarg="$1" + opt_mode="$optarg" +case $optarg in + # Valid mode arguments: + clean|compile|execute|finish|install|link|relink|uninstall) ;; + + # Catch anything else as an error + *) func_error "invalid argument for $opt" + exit_cmd=exit + break + ;; +esac + shift + ;; + --no-silent|--no-quiet) + opt_silent=false +func_append preserve_args " $opt" + ;; + --no-warning|--no-warn) + opt_warning=false +func_append preserve_args " $opt" + ;; + --no-verbose) + opt_verbose=false +func_append preserve_args " $opt" + ;; + --silent|--quiet) + opt_silent=: +func_append preserve_args " $opt" + opt_verbose=false + ;; + --verbose|-v) + opt_verbose=: +func_append preserve_args " $opt" +opt_silent=false + ;; + --tag) + test $# = 0 && func_missing_arg $opt && break + optarg="$1" + opt_tag="$optarg" +func_append preserve_args " $opt $optarg" +func_enable_tag "$optarg" + shift + ;; + + -\?|-h) func_usage ;; + --help) func_help ;; + --version) func_version ;; + + # Separate optargs to long options: + --*=*) + func_split_long_opt "$opt" + set dummy "$func_split_long_opt_name" "$func_split_long_opt_arg" ${1+"$@"} + shift + ;; + + # Separate non-argument short options: + -\?*|-h*|-n*|-v*) + func_split_short_opt "$opt" + set dummy "$func_split_short_opt_name" "-$func_split_short_opt_arg" ${1+"$@"} + shift + ;; + + --) break ;; + -*) func_fatal_help "unrecognized option \`$opt'" ;; + *) set dummy "$opt" ${1+"$@"}; shift; break ;; + esac + done + + # Validate options: + + # save first non-option argument + if test "$#" -gt 0; then + nonopt="$opt" + shift + fi + + # preserve --debug + test "$opt_debug" = : || func_append preserve_args " --debug" + + case $host in + *cygwin* | *mingw* | *pw32* | *cegcc*) + # don't eliminate duplications in $postdeps and $predeps + opt_duplicate_compiler_generated_deps=: + ;; + *) + opt_duplicate_compiler_generated_deps=$opt_preserve_dup_deps + ;; + esac + + $opt_help || { + # Sanity checks first: + func_check_version_match + + if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then + func_fatal_configuration "not configured to build any kind of library" + fi + + # Darwin sucks + eval std_shrext=\"$shrext_cmds\" + + # Only execute mode is allowed to have -dlopen flags. + if test -n "$opt_dlopen" && test "$opt_mode" != execute; then + func_error "unrecognized option \`-dlopen'" + $ECHO "$help" 1>&2 + exit $EXIT_FAILURE + fi + + # Change the help message to a mode-specific one. + generic_help="$help" + help="Try \`$progname --help --mode=$opt_mode' for more information." + } + + + # Bail if the options were screwed + $exit_cmd $EXIT_FAILURE +} + + + + +## ----------- ## +## Main. ## +## ----------- ## + +# func_lalib_p file +# True iff FILE is a libtool `.la' library or `.lo' object file. +# This function is only a basic sanity check; it will hardly flush out +# determined imposters. +func_lalib_p () +{ + test -f "$1" && + $SED -e 4q "$1" 2>/dev/null \ + | $GREP "^# Generated by .*$PACKAGE" > /dev/null 2>&1 +} + +# func_lalib_unsafe_p file +# True iff FILE is a libtool `.la' library or `.lo' object file. +# This function implements the same check as func_lalib_p without +# resorting to external programs. To this end, it redirects stdin and +# closes it afterwards, without saving the original file descriptor. +# As a safety measure, use it only where a negative result would be +# fatal anyway. Works if `file' does not exist. +func_lalib_unsafe_p () +{ + lalib_p=no + if test -f "$1" && test -r "$1" && exec 5<&0 <"$1"; then + for lalib_p_l in 1 2 3 4 + do + read lalib_p_line + case "$lalib_p_line" in + \#\ Generated\ by\ *$PACKAGE* ) lalib_p=yes; break;; + esac + done + exec 0<&5 5<&- + fi + test "$lalib_p" = yes +} + +# func_ltwrapper_script_p file +# True iff FILE is a libtool wrapper script +# This function is only a basic sanity check; it will hardly flush out +# determined imposters. +func_ltwrapper_script_p () +{ + func_lalib_p "$1" +} + +# func_ltwrapper_executable_p file +# True iff FILE is a libtool wrapper executable +# This function is only a basic sanity check; it will hardly flush out +# determined imposters. +func_ltwrapper_executable_p () +{ + func_ltwrapper_exec_suffix= + case $1 in + *.exe) ;; + *) func_ltwrapper_exec_suffix=.exe ;; + esac + $GREP "$magic_exe" "$1$func_ltwrapper_exec_suffix" >/dev/null 2>&1 +} + +# func_ltwrapper_scriptname file +# Assumes file is an ltwrapper_executable +# uses $file to determine the appropriate filename for a +# temporary ltwrapper_script. +func_ltwrapper_scriptname () +{ + func_dirname_and_basename "$1" "" "." + func_stripname '' '.exe' "$func_basename_result" + func_ltwrapper_scriptname_result="$func_dirname_result/$objdir/${func_stripname_result}_ltshwrapper" +} + +# func_ltwrapper_p file +# True iff FILE is a libtool wrapper script or wrapper executable +# This function is only a basic sanity check; it will hardly flush out +# determined imposters. +func_ltwrapper_p () +{ + func_ltwrapper_script_p "$1" || func_ltwrapper_executable_p "$1" +} + + +# func_execute_cmds commands fail_cmd +# Execute tilde-delimited COMMANDS. +# If FAIL_CMD is given, eval that upon failure. +# FAIL_CMD may read-access the current command in variable CMD! +func_execute_cmds () +{ + $opt_debug + save_ifs=$IFS; IFS='~' + for cmd in $1; do + IFS=$save_ifs + eval cmd=\"$cmd\" + func_show_eval "$cmd" "${2-:}" + done + IFS=$save_ifs +} + + +# func_source file +# Source FILE, adding directory component if necessary. +# Note that it is not necessary on cygwin/mingw to append a dot to +# FILE even if both FILE and FILE.exe exist: automatic-append-.exe +# behavior happens only for exec(3), not for open(2)! Also, sourcing +# `FILE.' does not work on cygwin managed mounts. +func_source () +{ + $opt_debug + case $1 in + */* | *\\*) . "$1" ;; + *) . "./$1" ;; + esac +} + + +# func_resolve_sysroot PATH +# Replace a leading = in PATH with a sysroot. Store the result into +# func_resolve_sysroot_result +func_resolve_sysroot () +{ + func_resolve_sysroot_result=$1 + case $func_resolve_sysroot_result in + =*) + func_stripname '=' '' "$func_resolve_sysroot_result" + func_resolve_sysroot_result=$lt_sysroot$func_stripname_result + ;; + esac +} + +# func_replace_sysroot PATH +# If PATH begins with the sysroot, replace it with = and +# store the result into func_replace_sysroot_result. +func_replace_sysroot () +{ + case "$lt_sysroot:$1" in + ?*:"$lt_sysroot"*) + func_stripname "$lt_sysroot" '' "$1" + func_replace_sysroot_result="=$func_stripname_result" + ;; + *) + # Including no sysroot. + func_replace_sysroot_result=$1 + ;; + esac +} + +# func_infer_tag arg +# Infer tagged configuration to use if any are available and +# if one wasn't chosen via the "--tag" command line option. +# Only attempt this if the compiler in the base compile +# command doesn't match the default compiler. +# arg is usually of the form 'gcc ...' +func_infer_tag () +{ + $opt_debug + if test -n "$available_tags" && test -z "$tagname"; then + CC_quoted= + for arg in $CC; do + func_append_quoted CC_quoted "$arg" + done + CC_expanded=`func_echo_all $CC` + CC_quoted_expanded=`func_echo_all $CC_quoted` + case $@ in + # Blanks in the command may have been stripped by the calling shell, + # but not from the CC environment variable when configure was run. + " $CC "* | "$CC "* | " $CC_expanded "* | "$CC_expanded "* | \ + " $CC_quoted"* | "$CC_quoted "* | " $CC_quoted_expanded "* | "$CC_quoted_expanded "*) ;; + # Blanks at the start of $base_compile will cause this to fail + # if we don't check for them as well. + *) + for z in $available_tags; do + if $GREP "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then + # Evaluate the configuration. + eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`" + CC_quoted= + for arg in $CC; do + # Double-quote args containing other shell metacharacters. + func_append_quoted CC_quoted "$arg" + done + CC_expanded=`func_echo_all $CC` + CC_quoted_expanded=`func_echo_all $CC_quoted` + case "$@ " in + " $CC "* | "$CC "* | " $CC_expanded "* | "$CC_expanded "* | \ + " $CC_quoted"* | "$CC_quoted "* | " $CC_quoted_expanded "* | "$CC_quoted_expanded "*) + # The compiler in the base compile command matches + # the one in the tagged configuration. + # Assume this is the tagged configuration we want. + tagname=$z + break + ;; + esac + fi + done + # If $tagname still isn't set, then no tagged configuration + # was found and let the user know that the "--tag" command + # line option must be used. + if test -z "$tagname"; then + func_echo "unable to infer tagged configuration" + func_fatal_error "specify a tag with \`--tag'" +# else +# func_verbose "using $tagname tagged configuration" + fi + ;; + esac + fi +} + + + +# func_write_libtool_object output_name pic_name nonpic_name +# Create a libtool object file (analogous to a ".la" file), +# but don't create it if we're doing a dry run. +func_write_libtool_object () +{ + write_libobj=${1} + if test "$build_libtool_libs" = yes; then + write_lobj=\'${2}\' + else + write_lobj=none + fi + + if test "$build_old_libs" = yes; then + write_oldobj=\'${3}\' + else + write_oldobj=none + fi + + $opt_dry_run || { + cat >${write_libobj}T </dev/null` + if test "$?" -eq 0 && test -n "${func_convert_core_file_wine_to_w32_tmp}"; then + func_convert_core_file_wine_to_w32_result=`$ECHO "$func_convert_core_file_wine_to_w32_tmp" | + $SED -e "$lt_sed_naive_backslashify"` + else + func_convert_core_file_wine_to_w32_result= + fi + fi +} +# end: func_convert_core_file_wine_to_w32 + + +# func_convert_core_path_wine_to_w32 ARG +# Helper function used by path conversion functions when $build is *nix, and +# $host is mingw, cygwin, or some other w32 environment. Relies on a correctly +# configured wine environment available, with the winepath program in $build's +# $PATH. Assumes ARG has no leading or trailing path separator characters. +# +# ARG is path to be converted from $build format to win32. +# Result is available in $func_convert_core_path_wine_to_w32_result. +# Unconvertible file (directory) names in ARG are skipped; if no directory names +# are convertible, then the result may be empty. +func_convert_core_path_wine_to_w32 () +{ + $opt_debug + # unfortunately, winepath doesn't convert paths, only file names + func_convert_core_path_wine_to_w32_result="" + if test -n "$1"; then + oldIFS=$IFS + IFS=: + for func_convert_core_path_wine_to_w32_f in $1; do + IFS=$oldIFS + func_convert_core_file_wine_to_w32 "$func_convert_core_path_wine_to_w32_f" + if test -n "$func_convert_core_file_wine_to_w32_result" ; then + if test -z "$func_convert_core_path_wine_to_w32_result"; then + func_convert_core_path_wine_to_w32_result="$func_convert_core_file_wine_to_w32_result" + else + func_append func_convert_core_path_wine_to_w32_result ";$func_convert_core_file_wine_to_w32_result" + fi + fi + done + IFS=$oldIFS + fi +} +# end: func_convert_core_path_wine_to_w32 + + +# func_cygpath ARGS... +# Wrapper around calling the cygpath program via LT_CYGPATH. This is used when +# when (1) $build is *nix and Cygwin is hosted via a wine environment; or (2) +# $build is MSYS and $host is Cygwin, or (3) $build is Cygwin. In case (1) or +# (2), returns the Cygwin file name or path in func_cygpath_result (input +# file name or path is assumed to be in w32 format, as previously converted +# from $build's *nix or MSYS format). In case (3), returns the w32 file name +# or path in func_cygpath_result (input file name or path is assumed to be in +# Cygwin format). Returns an empty string on error. +# +# ARGS are passed to cygpath, with the last one being the file name or path to +# be converted. +# +# Specify the absolute *nix (or w32) name to cygpath in the LT_CYGPATH +# environment variable; do not put it in $PATH. +func_cygpath () +{ + $opt_debug + if test -n "$LT_CYGPATH" && test -f "$LT_CYGPATH"; then + func_cygpath_result=`$LT_CYGPATH "$@" 2>/dev/null` + if test "$?" -ne 0; then + # on failure, ensure result is empty + func_cygpath_result= + fi + else + func_cygpath_result= + func_error "LT_CYGPATH is empty or specifies non-existent file: \`$LT_CYGPATH'" + fi +} +#end: func_cygpath + + +# func_convert_core_msys_to_w32 ARG +# Convert file name or path ARG from MSYS format to w32 format. Return +# result in func_convert_core_msys_to_w32_result. +func_convert_core_msys_to_w32 () +{ + $opt_debug + # awkward: cmd appends spaces to result + func_convert_core_msys_to_w32_result=`( cmd //c echo "$1" ) 2>/dev/null | + $SED -e 's/[ ]*$//' -e "$lt_sed_naive_backslashify"` +} +#end: func_convert_core_msys_to_w32 + + +# func_convert_file_check ARG1 ARG2 +# Verify that ARG1 (a file name in $build format) was converted to $host +# format in ARG2. Otherwise, emit an error message, but continue (resetting +# func_to_host_file_result to ARG1). +func_convert_file_check () +{ + $opt_debug + if test -z "$2" && test -n "$1" ; then + func_error "Could not determine host file name corresponding to" + func_error " \`$1'" + func_error "Continuing, but uninstalled executables may not work." + # Fallback: + func_to_host_file_result="$1" + fi +} +# end func_convert_file_check + + +# func_convert_path_check FROM_PATHSEP TO_PATHSEP FROM_PATH TO_PATH +# Verify that FROM_PATH (a path in $build format) was converted to $host +# format in TO_PATH. Otherwise, emit an error message, but continue, resetting +# func_to_host_file_result to a simplistic fallback value (see below). +func_convert_path_check () +{ + $opt_debug + if test -z "$4" && test -n "$3"; then + func_error "Could not determine the host path corresponding to" + func_error " \`$3'" + func_error "Continuing, but uninstalled executables may not work." + # Fallback. This is a deliberately simplistic "conversion" and + # should not be "improved". See libtool.info. + if test "x$1" != "x$2"; then + lt_replace_pathsep_chars="s|$1|$2|g" + func_to_host_path_result=`echo "$3" | + $SED -e "$lt_replace_pathsep_chars"` + else + func_to_host_path_result="$3" + fi + fi +} +# end func_convert_path_check + + +# func_convert_path_front_back_pathsep FRONTPAT BACKPAT REPL ORIG +# Modifies func_to_host_path_result by prepending REPL if ORIG matches FRONTPAT +# and appending REPL if ORIG matches BACKPAT. +func_convert_path_front_back_pathsep () +{ + $opt_debug + case $4 in + $1 ) func_to_host_path_result="$3$func_to_host_path_result" + ;; + esac + case $4 in + $2 ) func_append func_to_host_path_result "$3" + ;; + esac +} +# end func_convert_path_front_back_pathsep + + +################################################## +# $build to $host FILE NAME CONVERSION FUNCTIONS # +################################################## +# invoked via `$to_host_file_cmd ARG' +# +# In each case, ARG is the path to be converted from $build to $host format. +# Result will be available in $func_to_host_file_result. + + +# func_to_host_file ARG +# Converts the file name ARG from $build format to $host format. Return result +# in func_to_host_file_result. +func_to_host_file () +{ + $opt_debug + $to_host_file_cmd "$1" +} +# end func_to_host_file + + +# func_to_tool_file ARG LAZY +# converts the file name ARG from $build format to toolchain format. Return +# result in func_to_tool_file_result. If the conversion in use is listed +# in (the comma separated) LAZY, no conversion takes place. +func_to_tool_file () +{ + $opt_debug + case ,$2, in + *,"$to_tool_file_cmd",*) + func_to_tool_file_result=$1 + ;; + *) + $to_tool_file_cmd "$1" + func_to_tool_file_result=$func_to_host_file_result + ;; + esac +} +# end func_to_tool_file + + +# func_convert_file_noop ARG +# Copy ARG to func_to_host_file_result. +func_convert_file_noop () +{ + func_to_host_file_result="$1" +} +# end func_convert_file_noop + + +# func_convert_file_msys_to_w32 ARG +# Convert file name ARG from (mingw) MSYS to (mingw) w32 format; automatic +# conversion to w32 is not available inside the cwrapper. Returns result in +# func_to_host_file_result. +func_convert_file_msys_to_w32 () +{ + $opt_debug + func_to_host_file_result="$1" + if test -n "$1"; then + func_convert_core_msys_to_w32 "$1" + func_to_host_file_result="$func_convert_core_msys_to_w32_result" + fi + func_convert_file_check "$1" "$func_to_host_file_result" +} +# end func_convert_file_msys_to_w32 + + +# func_convert_file_cygwin_to_w32 ARG +# Convert file name ARG from Cygwin to w32 format. Returns result in +# func_to_host_file_result. +func_convert_file_cygwin_to_w32 () +{ + $opt_debug + func_to_host_file_result="$1" + if test -n "$1"; then + # because $build is cygwin, we call "the" cygpath in $PATH; no need to use + # LT_CYGPATH in this case. + func_to_host_file_result=`cygpath -m "$1"` + fi + func_convert_file_check "$1" "$func_to_host_file_result" +} +# end func_convert_file_cygwin_to_w32 + + +# func_convert_file_nix_to_w32 ARG +# Convert file name ARG from *nix to w32 format. Requires a wine environment +# and a working winepath. Returns result in func_to_host_file_result. +func_convert_file_nix_to_w32 () +{ + $opt_debug + func_to_host_file_result="$1" + if test -n "$1"; then + func_convert_core_file_wine_to_w32 "$1" + func_to_host_file_result="$func_convert_core_file_wine_to_w32_result" + fi + func_convert_file_check "$1" "$func_to_host_file_result" +} +# end func_convert_file_nix_to_w32 + + +# func_convert_file_msys_to_cygwin ARG +# Convert file name ARG from MSYS to Cygwin format. Requires LT_CYGPATH set. +# Returns result in func_to_host_file_result. +func_convert_file_msys_to_cygwin () +{ + $opt_debug + func_to_host_file_result="$1" + if test -n "$1"; then + func_convert_core_msys_to_w32 "$1" + func_cygpath -u "$func_convert_core_msys_to_w32_result" + func_to_host_file_result="$func_cygpath_result" + fi + func_convert_file_check "$1" "$func_to_host_file_result" +} +# end func_convert_file_msys_to_cygwin + + +# func_convert_file_nix_to_cygwin ARG +# Convert file name ARG from *nix to Cygwin format. Requires Cygwin installed +# in a wine environment, working winepath, and LT_CYGPATH set. Returns result +# in func_to_host_file_result. +func_convert_file_nix_to_cygwin () +{ + $opt_debug + func_to_host_file_result="$1" + if test -n "$1"; then + # convert from *nix to w32, then use cygpath to convert from w32 to cygwin. + func_convert_core_file_wine_to_w32 "$1" + func_cygpath -u "$func_convert_core_file_wine_to_w32_result" + func_to_host_file_result="$func_cygpath_result" + fi + func_convert_file_check "$1" "$func_to_host_file_result" +} +# end func_convert_file_nix_to_cygwin + + +############################################# +# $build to $host PATH CONVERSION FUNCTIONS # +############################################# +# invoked via `$to_host_path_cmd ARG' +# +# In each case, ARG is the path to be converted from $build to $host format. +# The result will be available in $func_to_host_path_result. +# +# Path separators are also converted from $build format to $host format. If +# ARG begins or ends with a path separator character, it is preserved (but +# converted to $host format) on output. +# +# All path conversion functions are named using the following convention: +# file name conversion function : func_convert_file_X_to_Y () +# path conversion function : func_convert_path_X_to_Y () +# where, for any given $build/$host combination the 'X_to_Y' value is the +# same. If conversion functions are added for new $build/$host combinations, +# the two new functions must follow this pattern, or func_init_to_host_path_cmd +# will break. + + +# func_init_to_host_path_cmd +# Ensures that function "pointer" variable $to_host_path_cmd is set to the +# appropriate value, based on the value of $to_host_file_cmd. +to_host_path_cmd= +func_init_to_host_path_cmd () +{ + $opt_debug + if test -z "$to_host_path_cmd"; then + func_stripname 'func_convert_file_' '' "$to_host_file_cmd" + to_host_path_cmd="func_convert_path_${func_stripname_result}" + fi +} + + +# func_to_host_path ARG +# Converts the path ARG from $build format to $host format. Return result +# in func_to_host_path_result. +func_to_host_path () +{ + $opt_debug + func_init_to_host_path_cmd + $to_host_path_cmd "$1" +} +# end func_to_host_path + + +# func_convert_path_noop ARG +# Copy ARG to func_to_host_path_result. +func_convert_path_noop () +{ + func_to_host_path_result="$1" +} +# end func_convert_path_noop + + +# func_convert_path_msys_to_w32 ARG +# Convert path ARG from (mingw) MSYS to (mingw) w32 format; automatic +# conversion to w32 is not available inside the cwrapper. Returns result in +# func_to_host_path_result. +func_convert_path_msys_to_w32 () +{ + $opt_debug + func_to_host_path_result="$1" + if test -n "$1"; then + # Remove leading and trailing path separator characters from ARG. MSYS + # behavior is inconsistent here; cygpath turns them into '.;' and ';.'; + # and winepath ignores them completely. + func_stripname : : "$1" + func_to_host_path_tmp1=$func_stripname_result + func_convert_core_msys_to_w32 "$func_to_host_path_tmp1" + func_to_host_path_result="$func_convert_core_msys_to_w32_result" + func_convert_path_check : ";" \ + "$func_to_host_path_tmp1" "$func_to_host_path_result" + func_convert_path_front_back_pathsep ":*" "*:" ";" "$1" + fi +} +# end func_convert_path_msys_to_w32 + + +# func_convert_path_cygwin_to_w32 ARG +# Convert path ARG from Cygwin to w32 format. Returns result in +# func_to_host_file_result. +func_convert_path_cygwin_to_w32 () +{ + $opt_debug + func_to_host_path_result="$1" + if test -n "$1"; then + # See func_convert_path_msys_to_w32: + func_stripname : : "$1" + func_to_host_path_tmp1=$func_stripname_result + func_to_host_path_result=`cygpath -m -p "$func_to_host_path_tmp1"` + func_convert_path_check : ";" \ + "$func_to_host_path_tmp1" "$func_to_host_path_result" + func_convert_path_front_back_pathsep ":*" "*:" ";" "$1" + fi +} +# end func_convert_path_cygwin_to_w32 + + +# func_convert_path_nix_to_w32 ARG +# Convert path ARG from *nix to w32 format. Requires a wine environment and +# a working winepath. Returns result in func_to_host_file_result. +func_convert_path_nix_to_w32 () +{ + $opt_debug + func_to_host_path_result="$1" + if test -n "$1"; then + # See func_convert_path_msys_to_w32: + func_stripname : : "$1" + func_to_host_path_tmp1=$func_stripname_result + func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1" + func_to_host_path_result="$func_convert_core_path_wine_to_w32_result" + func_convert_path_check : ";" \ + "$func_to_host_path_tmp1" "$func_to_host_path_result" + func_convert_path_front_back_pathsep ":*" "*:" ";" "$1" + fi +} +# end func_convert_path_nix_to_w32 + + +# func_convert_path_msys_to_cygwin ARG +# Convert path ARG from MSYS to Cygwin format. Requires LT_CYGPATH set. +# Returns result in func_to_host_file_result. +func_convert_path_msys_to_cygwin () +{ + $opt_debug + func_to_host_path_result="$1" + if test -n "$1"; then + # See func_convert_path_msys_to_w32: + func_stripname : : "$1" + func_to_host_path_tmp1=$func_stripname_result + func_convert_core_msys_to_w32 "$func_to_host_path_tmp1" + func_cygpath -u -p "$func_convert_core_msys_to_w32_result" + func_to_host_path_result="$func_cygpath_result" + func_convert_path_check : : \ + "$func_to_host_path_tmp1" "$func_to_host_path_result" + func_convert_path_front_back_pathsep ":*" "*:" : "$1" + fi +} +# end func_convert_path_msys_to_cygwin + + +# func_convert_path_nix_to_cygwin ARG +# Convert path ARG from *nix to Cygwin format. Requires Cygwin installed in a +# a wine environment, working winepath, and LT_CYGPATH set. Returns result in +# func_to_host_file_result. +func_convert_path_nix_to_cygwin () +{ + $opt_debug + func_to_host_path_result="$1" + if test -n "$1"; then + # Remove leading and trailing path separator characters from + # ARG. msys behavior is inconsistent here, cygpath turns them + # into '.;' and ';.', and winepath ignores them completely. + func_stripname : : "$1" + func_to_host_path_tmp1=$func_stripname_result + func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1" + func_cygpath -u -p "$func_convert_core_path_wine_to_w32_result" + func_to_host_path_result="$func_cygpath_result" + func_convert_path_check : : \ + "$func_to_host_path_tmp1" "$func_to_host_path_result" + func_convert_path_front_back_pathsep ":*" "*:" : "$1" + fi +} +# end func_convert_path_nix_to_cygwin + + +# func_mode_compile arg... +func_mode_compile () +{ + $opt_debug + # Get the compilation command and the source file. + base_compile= + srcfile="$nonopt" # always keep a non-empty value in "srcfile" + suppress_opt=yes + suppress_output= + arg_mode=normal + libobj= + later= + pie_flag= + + for arg + do + case $arg_mode in + arg ) + # do not "continue". Instead, add this to base_compile + lastarg="$arg" + arg_mode=normal + ;; + + target ) + libobj="$arg" + arg_mode=normal + continue + ;; + + normal ) + # Accept any command-line options. + case $arg in + -o) + test -n "$libobj" && \ + func_fatal_error "you cannot specify \`-o' more than once" + arg_mode=target + continue + ;; + + -pie | -fpie | -fPIE) + func_append pie_flag " $arg" + continue + ;; + + -shared | -static | -prefer-pic | -prefer-non-pic) + func_append later " $arg" + continue + ;; + + -no-suppress) + suppress_opt=no + continue + ;; + + -Xcompiler) + arg_mode=arg # the next one goes into the "base_compile" arg list + continue # The current "srcfile" will either be retained or + ;; # replaced later. I would guess that would be a bug. + + -Wc,*) + func_stripname '-Wc,' '' "$arg" + args=$func_stripname_result + lastarg= + save_ifs="$IFS"; IFS=',' + for arg in $args; do + IFS="$save_ifs" + func_append_quoted lastarg "$arg" + done + IFS="$save_ifs" + func_stripname ' ' '' "$lastarg" + lastarg=$func_stripname_result + + # Add the arguments to base_compile. + func_append base_compile " $lastarg" + continue + ;; + + *) + # Accept the current argument as the source file. + # The previous "srcfile" becomes the current argument. + # + lastarg="$srcfile" + srcfile="$arg" + ;; + esac # case $arg + ;; + esac # case $arg_mode + + # Aesthetically quote the previous argument. + func_append_quoted base_compile "$lastarg" + done # for arg + + case $arg_mode in + arg) + func_fatal_error "you must specify an argument for -Xcompile" + ;; + target) + func_fatal_error "you must specify a target with \`-o'" + ;; + *) + # Get the name of the library object. + test -z "$libobj" && { + func_basename "$srcfile" + libobj="$func_basename_result" + } + ;; + esac + + # Recognize several different file suffixes. + # If the user specifies -o file.o, it is replaced with file.lo + case $libobj in + *.[cCFSifmso] | \ + *.ada | *.adb | *.ads | *.asm | \ + *.c++ | *.cc | *.ii | *.class | *.cpp | *.cxx | \ + *.[fF][09]? | *.for | *.java | *.go | *.obj | *.sx | *.cu | *.cup) + func_xform "$libobj" + libobj=$func_xform_result + ;; + esac + + case $libobj in + *.lo) func_lo2o "$libobj"; obj=$func_lo2o_result ;; + *) + func_fatal_error "cannot determine name of library object from \`$libobj'" + ;; + esac + + func_infer_tag $base_compile + + for arg in $later; do + case $arg in + -shared) + test "$build_libtool_libs" != yes && \ + func_fatal_configuration "can not build a shared library" + build_old_libs=no + continue + ;; + + -static) + build_libtool_libs=no + build_old_libs=yes + continue + ;; + + -prefer-pic) + pic_mode=yes + continue + ;; + + -prefer-non-pic) + pic_mode=no + continue + ;; + esac + done + + func_quote_for_eval "$libobj" + test "X$libobj" != "X$func_quote_for_eval_result" \ + && $ECHO "X$libobj" | $GREP '[]~#^*{};<>?"'"'"' &()|`$[]' \ + && func_warning "libobj name \`$libobj' may not contain shell special characters." + func_dirname_and_basename "$obj" "/" "" + objname="$func_basename_result" + xdir="$func_dirname_result" + lobj=${xdir}$objdir/$objname + + test -z "$base_compile" && \ + func_fatal_help "you must specify a compilation command" + + # Delete any leftover library objects. + if test "$build_old_libs" = yes; then + removelist="$obj $lobj $libobj ${libobj}T" + else + removelist="$lobj $libobj ${libobj}T" + fi + + # On Cygwin there's no "real" PIC flag so we must build both object types + case $host_os in + cygwin* | mingw* | pw32* | os2* | cegcc*) + pic_mode=default + ;; + esac + if test "$pic_mode" = no && test "$deplibs_check_method" != pass_all; then + # non-PIC code in shared libraries is not supported + pic_mode=default + fi + + # Calculate the filename of the output object if compiler does + # not support -o with -c + if test "$compiler_c_o" = no; then + output_obj=`$ECHO "$srcfile" | $SED 's%^.*/%%; s%\.[^.]*$%%'`.${objext} + lockfile="$output_obj.lock" + else + output_obj= + need_locks=no + lockfile= + fi + + # Lock this critical section if it is needed + # We use this script file to make the link, it avoids creating a new file + if test "$need_locks" = yes; then + until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do + func_echo "Waiting for $lockfile to be removed" + sleep 2 + done + elif test "$need_locks" = warn; then + if test -f "$lockfile"; then + $ECHO "\ +*** ERROR, $lockfile exists and contains: +`cat $lockfile 2>/dev/null` + +This indicates that another process is trying to use the same +temporary object file, and libtool could not work around it because +your compiler does not support \`-c' and \`-o' together. If you +repeat this compilation, it may succeed, by chance, but you had better +avoid parallel builds (make -j) in this platform, or get a better +compiler." + + $opt_dry_run || $RM $removelist + exit $EXIT_FAILURE + fi + func_append removelist " $output_obj" + $ECHO "$srcfile" > "$lockfile" + fi + + $opt_dry_run || $RM $removelist + func_append removelist " $lockfile" + trap '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE' 1 2 15 + + func_to_tool_file "$srcfile" func_convert_file_msys_to_w32 + srcfile=$func_to_tool_file_result + func_quote_for_eval "$srcfile" + qsrcfile=$func_quote_for_eval_result + + # Only build a PIC object if we are building libtool libraries. + if test "$build_libtool_libs" = yes; then + # Without this assignment, base_compile gets emptied. + fbsd_hideous_sh_bug=$base_compile + + if test "$pic_mode" != no; then + command="$base_compile $qsrcfile $pic_flag" + else + # Don't build PIC code + command="$base_compile $qsrcfile" + fi + + func_mkdir_p "$xdir$objdir" + + if test -z "$output_obj"; then + # Place PIC objects in $objdir + func_append command " -o $lobj" + fi + + func_show_eval_locale "$command" \ + 'test -n "$output_obj" && $RM $removelist; exit $EXIT_FAILURE' + + if test "$need_locks" = warn && + test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then + $ECHO "\ +*** ERROR, $lockfile contains: +`cat $lockfile 2>/dev/null` + +but it should contain: +$srcfile + +This indicates that another process is trying to use the same +temporary object file, and libtool could not work around it because +your compiler does not support \`-c' and \`-o' together. If you +repeat this compilation, it may succeed, by chance, but you had better +avoid parallel builds (make -j) in this platform, or get a better +compiler." + + $opt_dry_run || $RM $removelist + exit $EXIT_FAILURE + fi + + # Just move the object if needed, then go on to compile the next one + if test -n "$output_obj" && test "X$output_obj" != "X$lobj"; then + func_show_eval '$MV "$output_obj" "$lobj"' \ + 'error=$?; $opt_dry_run || $RM $removelist; exit $error' + fi + + # Allow error messages only from the first compilation. + if test "$suppress_opt" = yes; then + suppress_output=' >/dev/null 2>&1' + fi + fi + + # Only build a position-dependent object if we build old libraries. + if test "$build_old_libs" = yes; then + if test "$pic_mode" != yes; then + # Don't build PIC code + command="$base_compile $qsrcfile$pie_flag" + else + command="$base_compile $qsrcfile $pic_flag" + fi + if test "$compiler_c_o" = yes; then + func_append command " -o $obj" + fi + + # Suppress compiler output if we already did a PIC compilation. + func_append command "$suppress_output" + func_show_eval_locale "$command" \ + '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE' + + if test "$need_locks" = warn && + test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then + $ECHO "\ +*** ERROR, $lockfile contains: +`cat $lockfile 2>/dev/null` + +but it should contain: +$srcfile + +This indicates that another process is trying to use the same +temporary object file, and libtool could not work around it because +your compiler does not support \`-c' and \`-o' together. If you +repeat this compilation, it may succeed, by chance, but you had better +avoid parallel builds (make -j) in this platform, or get a better +compiler." + + $opt_dry_run || $RM $removelist + exit $EXIT_FAILURE + fi + + # Just move the object if needed + if test -n "$output_obj" && test "X$output_obj" != "X$obj"; then + func_show_eval '$MV "$output_obj" "$obj"' \ + 'error=$?; $opt_dry_run || $RM $removelist; exit $error' + fi + fi + + $opt_dry_run || { + func_write_libtool_object "$libobj" "$objdir/$objname" "$objname" + + # Unlock the critical section if it was locked + if test "$need_locks" != no; then + removelist=$lockfile + $RM "$lockfile" + fi + } + + exit $EXIT_SUCCESS +} + +$opt_help || { + test "$opt_mode" = compile && func_mode_compile ${1+"$@"} +} + +func_mode_help () +{ + # We need to display help for each of the modes. + case $opt_mode in + "") + # Generic help is extracted from the usage comments + # at the start of this file. + func_help + ;; + + clean) + $ECHO \ +"Usage: $progname [OPTION]... --mode=clean RM [RM-OPTION]... FILE... + +Remove files from the build directory. + +RM is the name of the program to use to delete files associated with each FILE +(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed +to RM. + +If FILE is a libtool library, object or program, all the files associated +with it are deleted. Otherwise, only FILE itself is deleted using RM." + ;; + + compile) + $ECHO \ +"Usage: $progname [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE + +Compile a source file into a libtool library object. + +This mode accepts the following additional options: + + -o OUTPUT-FILE set the output file name to OUTPUT-FILE + -no-suppress do not suppress compiler output for multiple passes + -prefer-pic try to build PIC objects only + -prefer-non-pic try to build non-PIC objects only + -shared do not build a \`.o' file suitable for static linking + -static only build a \`.o' file suitable for static linking + -Wc,FLAG pass FLAG directly to the compiler + +COMPILE-COMMAND is a command to be used in creating a \`standard' object file +from the given SOURCEFILE. + +The output file name is determined by removing the directory component from +SOURCEFILE, then substituting the C source code suffix \`.c' with the +library object suffix, \`.lo'." + ;; + + execute) + $ECHO \ +"Usage: $progname [OPTION]... --mode=execute COMMAND [ARGS]... + +Automatically set library path, then run a program. + +This mode accepts the following additional options: + + -dlopen FILE add the directory containing FILE to the library path + +This mode sets the library path environment variable according to \`-dlopen' +flags. + +If any of the ARGS are libtool executable wrappers, then they are translated +into their corresponding uninstalled binary, and any of their required library +directories are added to the library path. + +Then, COMMAND is executed, with ARGS as arguments." + ;; + + finish) + $ECHO \ +"Usage: $progname [OPTION]... --mode=finish [LIBDIR]... + +Complete the installation of libtool libraries. + +Each LIBDIR is a directory that contains libtool libraries. + +The commands that this mode executes may require superuser privileges. Use +the \`--dry-run' option if you just want to see what would be executed." + ;; + + install) + $ECHO \ +"Usage: $progname [OPTION]... --mode=install INSTALL-COMMAND... + +Install executables or libraries. + +INSTALL-COMMAND is the installation command. The first component should be +either the \`install' or \`cp' program. + +The following components of INSTALL-COMMAND are treated specially: + + -inst-prefix-dir PREFIX-DIR Use PREFIX-DIR as a staging area for installation + +The rest of the components are interpreted as arguments to that command (only +BSD-compatible install options are recognized)." + ;; + + link) + $ECHO \ +"Usage: $progname [OPTION]... --mode=link LINK-COMMAND... + +Link object files or libraries together to form another library, or to +create an executable program. + +LINK-COMMAND is a command using the C compiler that you would use to create +a program from several object files. + +The following components of LINK-COMMAND are treated specially: + + -all-static do not do any dynamic linking at all + -avoid-version do not add a version suffix if possible + -bindir BINDIR specify path to binaries directory (for systems where + libraries must be found in the PATH setting at runtime) + -dlopen FILE \`-dlpreopen' FILE if it cannot be dlopened at runtime + -dlpreopen FILE link in FILE and add its symbols to lt_preloaded_symbols + -export-dynamic allow symbols from OUTPUT-FILE to be resolved with dlsym(3) + -export-symbols SYMFILE + try to export only the symbols listed in SYMFILE + -export-symbols-regex REGEX + try to export only the symbols matching REGEX + -LLIBDIR search LIBDIR for required installed libraries + -lNAME OUTPUT-FILE requires the installed library libNAME + -module build a library that can dlopened + -no-fast-install disable the fast-install mode + -no-install link a not-installable executable + -no-undefined declare that a library does not refer to external symbols + -o OUTPUT-FILE create OUTPUT-FILE from the specified objects + -objectlist FILE Use a list of object files found in FILE to specify objects + -precious-files-regex REGEX + don't remove output files matching REGEX + -release RELEASE specify package release information + -rpath LIBDIR the created library will eventually be installed in LIBDIR + -R[ ]LIBDIR add LIBDIR to the runtime path of programs and libraries + -shared only do dynamic linking of libtool libraries + -shrext SUFFIX override the standard shared library file extension + -static do not do any dynamic linking of uninstalled libtool libraries + -static-libtool-libs + do not do any dynamic linking of libtool libraries + -version-info CURRENT[:REVISION[:AGE]] + specify library version info [each variable defaults to 0] + -weak LIBNAME declare that the target provides the LIBNAME interface + -Wc,FLAG + -Xcompiler FLAG pass linker-specific FLAG directly to the compiler + -Wl,FLAG + -Xlinker FLAG pass linker-specific FLAG directly to the linker + -XCClinker FLAG pass link-specific FLAG to the compiler driver (CC) + +All other options (arguments beginning with \`-') are ignored. + +Every other argument is treated as a filename. Files ending in \`.la' are +treated as uninstalled libtool libraries, other files are standard or library +object files. + +If the OUTPUT-FILE ends in \`.la', then a libtool library is created, +only library objects (\`.lo' files) may be specified, and \`-rpath' is +required, except when creating a convenience library. + +If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created +using \`ar' and \`ranlib', or on Windows using \`lib'. + +If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file +is created, otherwise an executable program is created." + ;; + + uninstall) + $ECHO \ +"Usage: $progname [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE... + +Remove libraries from an installation directory. + +RM is the name of the program to use to delete files associated with each FILE +(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed +to RM. + +If FILE is a libtool library, all the files associated with it are deleted. +Otherwise, only FILE itself is deleted using RM." + ;; + + *) + func_fatal_help "invalid operation mode \`$opt_mode'" + ;; + esac + + echo + $ECHO "Try \`$progname --help' for more information about other modes." +} + +# Now that we've collected a possible --mode arg, show help if necessary +if $opt_help; then + if test "$opt_help" = :; then + func_mode_help + else + { + func_help noexit + for opt_mode in compile link execute install finish uninstall clean; do + func_mode_help + done + } | sed -n '1p; 2,$s/^Usage:/ or: /p' + { + func_help noexit + for opt_mode in compile link execute install finish uninstall clean; do + echo + func_mode_help + done + } | + sed '1d + /^When reporting/,/^Report/{ + H + d + } + $x + /information about other modes/d + /more detailed .*MODE/d + s/^Usage:.*--mode=\([^ ]*\) .*/Description of \1 mode:/' + fi + exit $? +fi + + +# func_mode_execute arg... +func_mode_execute () +{ + $opt_debug + # The first argument is the command name. + cmd="$nonopt" + test -z "$cmd" && \ + func_fatal_help "you must specify a COMMAND" + + # Handle -dlopen flags immediately. + for file in $opt_dlopen; do + test -f "$file" \ + || func_fatal_help "\`$file' is not a file" + + dir= + case $file in + *.la) + func_resolve_sysroot "$file" + file=$func_resolve_sysroot_result + + # Check to see that this really is a libtool archive. + func_lalib_unsafe_p "$file" \ + || func_fatal_help "\`$lib' is not a valid libtool archive" + + # Read the libtool library. + dlname= + library_names= + func_source "$file" + + # Skip this library if it cannot be dlopened. + if test -z "$dlname"; then + # Warn if it was a shared library. + test -n "$library_names" && \ + func_warning "\`$file' was not linked with \`-export-dynamic'" + continue + fi + + func_dirname "$file" "" "." + dir="$func_dirname_result" + + if test -f "$dir/$objdir/$dlname"; then + func_append dir "/$objdir" + else + if test ! -f "$dir/$dlname"; then + func_fatal_error "cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'" + fi + fi + ;; + + *.lo) + # Just add the directory containing the .lo file. + func_dirname "$file" "" "." + dir="$func_dirname_result" + ;; + + *) + func_warning "\`-dlopen' is ignored for non-libtool libraries and objects" + continue + ;; + esac + + # Get the absolute pathname. + absdir=`cd "$dir" && pwd` + test -n "$absdir" && dir="$absdir" + + # Now add the directory to shlibpath_var. + if eval "test -z \"\$$shlibpath_var\""; then + eval "$shlibpath_var=\"\$dir\"" + else + eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\"" + fi + done + + # This variable tells wrapper scripts just to set shlibpath_var + # rather than running their programs. + libtool_execute_magic="$magic" + + # Check if any of the arguments is a wrapper script. + args= + for file + do + case $file in + -* | *.la | *.lo ) ;; + *) + # Do a test to see if this is really a libtool program. + if func_ltwrapper_script_p "$file"; then + func_source "$file" + # Transform arg to wrapped name. + file="$progdir/$program" + elif func_ltwrapper_executable_p "$file"; then + func_ltwrapper_scriptname "$file" + func_source "$func_ltwrapper_scriptname_result" + # Transform arg to wrapped name. + file="$progdir/$program" + fi + ;; + esac + # Quote arguments (to preserve shell metacharacters). + func_append_quoted args "$file" + done + + if test "X$opt_dry_run" = Xfalse; then + if test -n "$shlibpath_var"; then + # Export the shlibpath_var. + eval "export $shlibpath_var" + fi + + # Restore saved environment variables + for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES + do + eval "if test \"\${save_$lt_var+set}\" = set; then + $lt_var=\$save_$lt_var; export $lt_var + else + $lt_unset $lt_var + fi" + done + + # Now prepare to actually exec the command. + exec_cmd="\$cmd$args" + else + # Display what would be done. + if test -n "$shlibpath_var"; then + eval "\$ECHO \"\$shlibpath_var=\$$shlibpath_var\"" + echo "export $shlibpath_var" + fi + $ECHO "$cmd$args" + exit $EXIT_SUCCESS + fi +} + +test "$opt_mode" = execute && func_mode_execute ${1+"$@"} + + +# func_mode_finish arg... +func_mode_finish () +{ + $opt_debug + libs= + libdirs= + admincmds= + + for opt in "$nonopt" ${1+"$@"} + do + if test -d "$opt"; then + func_append libdirs " $opt" + + elif test -f "$opt"; then + if func_lalib_unsafe_p "$opt"; then + func_append libs " $opt" + else + func_warning "\`$opt' is not a valid libtool archive" + fi + + else + func_fatal_error "invalid argument \`$opt'" + fi + done + + if test -n "$libs"; then + if test -n "$lt_sysroot"; then + sysroot_regex=`$ECHO "$lt_sysroot" | $SED "$sed_make_literal_regex"` + sysroot_cmd="s/\([ ']\)$sysroot_regex/\1/g;" + else + sysroot_cmd= + fi + + # Remove sysroot references + if $opt_dry_run; then + for lib in $libs; do + echo "removing references to $lt_sysroot and \`=' prefixes from $lib" + done + else + tmpdir=`func_mktempdir` + for lib in $libs; do + sed -e "${sysroot_cmd} s/\([ ']-[LR]\)=/\1/g; s/\([ ']\)=/\1/g" $lib \ + > $tmpdir/tmp-la + mv -f $tmpdir/tmp-la $lib + done + ${RM}r "$tmpdir" + fi + fi + + if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then + for libdir in $libdirs; do + if test -n "$finish_cmds"; then + # Do each command in the finish commands. + func_execute_cmds "$finish_cmds" 'admincmds="$admincmds +'"$cmd"'"' + fi + if test -n "$finish_eval"; then + # Do the single finish_eval. + eval cmds=\"$finish_eval\" + $opt_dry_run || eval "$cmds" || func_append admincmds " + $cmds" + fi + done + fi + + # Exit here if they wanted silent mode. + $opt_silent && exit $EXIT_SUCCESS + + if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then + echo "----------------------------------------------------------------------" + echo "Libraries have been installed in:" + for libdir in $libdirs; do + $ECHO " $libdir" + done + echo + echo "If you ever happen to want to link against installed libraries" + echo "in a given directory, LIBDIR, you must either use libtool, and" + echo "specify the full pathname of the library, or use the \`-LLIBDIR'" + echo "flag during linking and do at least one of the following:" + if test -n "$shlibpath_var"; then + echo " - add LIBDIR to the \`$shlibpath_var' environment variable" + echo " during execution" + fi + if test -n "$runpath_var"; then + echo " - add LIBDIR to the \`$runpath_var' environment variable" + echo " during linking" + fi + if test -n "$hardcode_libdir_flag_spec"; then + libdir=LIBDIR + eval flag=\"$hardcode_libdir_flag_spec\" + + $ECHO " - use the \`$flag' linker flag" + fi + if test -n "$admincmds"; then + $ECHO " - have your system administrator run these commands:$admincmds" + fi + if test -f /etc/ld.so.conf; then + echo " - have your system administrator add LIBDIR to \`/etc/ld.so.conf'" + fi + echo + + echo "See any operating system documentation about shared libraries for" + case $host in + solaris2.[6789]|solaris2.1[0-9]) + echo "more information, such as the ld(1), crle(1) and ld.so(8) manual" + echo "pages." + ;; + *) + echo "more information, such as the ld(1) and ld.so(8) manual pages." + ;; + esac + echo "----------------------------------------------------------------------" + fi + exit $EXIT_SUCCESS +} + +test "$opt_mode" = finish && func_mode_finish ${1+"$@"} + + +# func_mode_install arg... +func_mode_install () +{ + $opt_debug + # There may be an optional sh(1) argument at the beginning of + # install_prog (especially on Windows NT). + if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh || + # Allow the use of GNU shtool's install command. + case $nonopt in *shtool*) :;; *) false;; esac; then + # Aesthetically quote it. + func_quote_for_eval "$nonopt" + install_prog="$func_quote_for_eval_result " + arg=$1 + shift + else + install_prog= + arg=$nonopt + fi + + # The real first argument should be the name of the installation program. + # Aesthetically quote it. + func_quote_for_eval "$arg" + func_append install_prog "$func_quote_for_eval_result" + install_shared_prog=$install_prog + case " $install_prog " in + *[\\\ /]cp\ *) install_cp=: ;; + *) install_cp=false ;; + esac + + # We need to accept at least all the BSD install flags. + dest= + files= + opts= + prev= + install_type= + isdir=no + stripme= + no_mode=: + for arg + do + arg2= + if test -n "$dest"; then + func_append files " $dest" + dest=$arg + continue + fi + + case $arg in + -d) isdir=yes ;; + -f) + if $install_cp; then :; else + prev=$arg + fi + ;; + -g | -m | -o) + prev=$arg + ;; + -s) + stripme=" -s" + continue + ;; + -*) + ;; + *) + # If the previous option needed an argument, then skip it. + if test -n "$prev"; then + if test "x$prev" = x-m && test -n "$install_override_mode"; then + arg2=$install_override_mode + no_mode=false + fi + prev= + else + dest=$arg + continue + fi + ;; + esac + + # Aesthetically quote the argument. + func_quote_for_eval "$arg" + func_append install_prog " $func_quote_for_eval_result" + if test -n "$arg2"; then + func_quote_for_eval "$arg2" + fi + func_append install_shared_prog " $func_quote_for_eval_result" + done + + test -z "$install_prog" && \ + func_fatal_help "you must specify an install program" + + test -n "$prev" && \ + func_fatal_help "the \`$prev' option requires an argument" + + if test -n "$install_override_mode" && $no_mode; then + if $install_cp; then :; else + func_quote_for_eval "$install_override_mode" + func_append install_shared_prog " -m $func_quote_for_eval_result" + fi + fi + + if test -z "$files"; then + if test -z "$dest"; then + func_fatal_help "no file or destination specified" + else + func_fatal_help "you must specify a destination" + fi + fi + + # Strip any trailing slash from the destination. + func_stripname '' '/' "$dest" + dest=$func_stripname_result + + # Check to see that the destination is a directory. + test -d "$dest" && isdir=yes + if test "$isdir" = yes; then + destdir="$dest" + destname= + else + func_dirname_and_basename "$dest" "" "." + destdir="$func_dirname_result" + destname="$func_basename_result" + + # Not a directory, so check to see that there is only one file specified. + set dummy $files; shift + test "$#" -gt 1 && \ + func_fatal_help "\`$dest' is not a directory" + fi + case $destdir in + [\\/]* | [A-Za-z]:[\\/]*) ;; + *) + for file in $files; do + case $file in + *.lo) ;; + *) + func_fatal_help "\`$destdir' must be an absolute directory name" + ;; + esac + done + ;; + esac + + # This variable tells wrapper scripts just to set variables rather + # than running their programs. + libtool_install_magic="$magic" + + staticlibs= + future_libdirs= + current_libdirs= + for file in $files; do + + # Do each installation. + case $file in + *.$libext) + # Do the static libraries later. + func_append staticlibs " $file" + ;; + + *.la) + func_resolve_sysroot "$file" + file=$func_resolve_sysroot_result + + # Check to see that this really is a libtool archive. + func_lalib_unsafe_p "$file" \ + || func_fatal_help "\`$file' is not a valid libtool archive" + + library_names= + old_library= + relink_command= + func_source "$file" + + # Add the libdir to current_libdirs if it is the destination. + if test "X$destdir" = "X$libdir"; then + case "$current_libdirs " in + *" $libdir "*) ;; + *) func_append current_libdirs " $libdir" ;; + esac + else + # Note the libdir as a future libdir. + case "$future_libdirs " in + *" $libdir "*) ;; + *) func_append future_libdirs " $libdir" ;; + esac + fi + + func_dirname "$file" "/" "" + dir="$func_dirname_result" + func_append dir "$objdir" + + if test -n "$relink_command"; then + # Determine the prefix the user has applied to our future dir. + inst_prefix_dir=`$ECHO "$destdir" | $SED -e "s%$libdir\$%%"` + + # Don't allow the user to place us outside of our expected + # location b/c this prevents finding dependent libraries that + # are installed to the same prefix. + # At present, this check doesn't affect windows .dll's that + # are installed into $libdir/../bin (currently, that works fine) + # but it's something to keep an eye on. + test "$inst_prefix_dir" = "$destdir" && \ + func_fatal_error "error: cannot install \`$file' to a directory not ending in $libdir" + + if test -n "$inst_prefix_dir"; then + # Stick the inst_prefix_dir data into the link command. + relink_command=`$ECHO "$relink_command" | $SED "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"` + else + relink_command=`$ECHO "$relink_command" | $SED "s%@inst_prefix_dir@%%"` + fi + + func_warning "relinking \`$file'" + func_show_eval "$relink_command" \ + 'func_fatal_error "error: relink \`$file'\'' with the above command before installing it"' + fi + + # See the names of the shared library. + set dummy $library_names; shift + if test -n "$1"; then + realname="$1" + shift + + srcname="$realname" + test -n "$relink_command" && srcname="$realname"T + + # Install the shared library and build the symlinks. + func_show_eval "$install_shared_prog $dir/$srcname $destdir/$realname" \ + 'exit $?' + tstripme="$stripme" + case $host_os in + cygwin* | mingw* | pw32* | cegcc*) + case $realname in + *.dll.a) + tstripme="" + ;; + esac + ;; + esac + if test -n "$tstripme" && test -n "$striplib"; then + func_show_eval "$striplib $destdir/$realname" 'exit $?' + fi + + if test "$#" -gt 0; then + # Delete the old symlinks, and create new ones. + # Try `ln -sf' first, because the `ln' binary might depend on + # the symlink we replace! Solaris /bin/ln does not understand -f, + # so we also need to try rm && ln -s. + for linkname + do + test "$linkname" != "$realname" \ + && func_show_eval "(cd $destdir && { $LN_S -f $realname $linkname || { $RM $linkname && $LN_S $realname $linkname; }; })" + done + fi + + # Do each command in the postinstall commands. + lib="$destdir/$realname" + func_execute_cmds "$postinstall_cmds" 'exit $?' + fi + + # Install the pseudo-library for information purposes. + func_basename "$file" + name="$func_basename_result" + instname="$dir/$name"i + func_show_eval "$install_prog $instname $destdir/$name" 'exit $?' + + # Maybe install the static library, too. + test -n "$old_library" && func_append staticlibs " $dir/$old_library" + ;; + + *.lo) + # Install (i.e. copy) a libtool object. + + # Figure out destination file name, if it wasn't already specified. + if test -n "$destname"; then + destfile="$destdir/$destname" + else + func_basename "$file" + destfile="$func_basename_result" + destfile="$destdir/$destfile" + fi + + # Deduce the name of the destination old-style object file. + case $destfile in + *.lo) + func_lo2o "$destfile" + staticdest=$func_lo2o_result + ;; + *.$objext) + staticdest="$destfile" + destfile= + ;; + *) + func_fatal_help "cannot copy a libtool object to \`$destfile'" + ;; + esac + + # Install the libtool object if requested. + test -n "$destfile" && \ + func_show_eval "$install_prog $file $destfile" 'exit $?' + + # Install the old object if enabled. + if test "$build_old_libs" = yes; then + # Deduce the name of the old-style object file. + func_lo2o "$file" + staticobj=$func_lo2o_result + func_show_eval "$install_prog \$staticobj \$staticdest" 'exit $?' + fi + exit $EXIT_SUCCESS + ;; + + *) + # Figure out destination file name, if it wasn't already specified. + if test -n "$destname"; then + destfile="$destdir/$destname" + else + func_basename "$file" + destfile="$func_basename_result" + destfile="$destdir/$destfile" + fi + + # If the file is missing, and there is a .exe on the end, strip it + # because it is most likely a libtool script we actually want to + # install + stripped_ext="" + case $file in + *.exe) + if test ! -f "$file"; then + func_stripname '' '.exe' "$file" + file=$func_stripname_result + stripped_ext=".exe" + fi + ;; + esac + + # Do a test to see if this is really a libtool program. + case $host in + *cygwin* | *mingw*) + if func_ltwrapper_executable_p "$file"; then + func_ltwrapper_scriptname "$file" + wrapper=$func_ltwrapper_scriptname_result + else + func_stripname '' '.exe' "$file" + wrapper=$func_stripname_result + fi + ;; + *) + wrapper=$file + ;; + esac + if func_ltwrapper_script_p "$wrapper"; then + notinst_deplibs= + relink_command= + + func_source "$wrapper" + + # Check the variables that should have been set. + test -z "$generated_by_libtool_version" && \ + func_fatal_error "invalid libtool wrapper script \`$wrapper'" + + finalize=yes + for lib in $notinst_deplibs; do + # Check to see that each library is installed. + libdir= + if test -f "$lib"; then + func_source "$lib" + fi + libfile="$libdir/"`$ECHO "$lib" | $SED 's%^.*/%%g'` ### testsuite: skip nested quoting test + if test -n "$libdir" && test ! -f "$libfile"; then + func_warning "\`$lib' has not been installed in \`$libdir'" + finalize=no + fi + done + + relink_command= + func_source "$wrapper" + + outputname= + if test "$fast_install" = no && test -n "$relink_command"; then + $opt_dry_run || { + if test "$finalize" = yes; then + tmpdir=`func_mktempdir` + func_basename "$file$stripped_ext" + file="$func_basename_result" + outputname="$tmpdir/$file" + # Replace the output file specification. + relink_command=`$ECHO "$relink_command" | $SED 's%@OUTPUT@%'"$outputname"'%g'` + + $opt_silent || { + func_quote_for_expand "$relink_command" + eval "func_echo $func_quote_for_expand_result" + } + if eval "$relink_command"; then : + else + func_error "error: relink \`$file' with the above command before installing it" + $opt_dry_run || ${RM}r "$tmpdir" + continue + fi + file="$outputname" + else + func_warning "cannot relink \`$file'" + fi + } + else + # Install the binary that we compiled earlier. + file=`$ECHO "$file$stripped_ext" | $SED "s%\([^/]*\)$%$objdir/\1%"` + fi + fi + + # remove .exe since cygwin /usr/bin/install will append another + # one anyway + case $install_prog,$host in + */usr/bin/install*,*cygwin*) + case $file:$destfile in + *.exe:*.exe) + # this is ok + ;; + *.exe:*) + destfile=$destfile.exe + ;; + *:*.exe) + func_stripname '' '.exe' "$destfile" + destfile=$func_stripname_result + ;; + esac + ;; + esac + func_show_eval "$install_prog\$stripme \$file \$destfile" 'exit $?' + $opt_dry_run || if test -n "$outputname"; then + ${RM}r "$tmpdir" + fi + ;; + esac + done + + for file in $staticlibs; do + func_basename "$file" + name="$func_basename_result" + + # Set up the ranlib parameters. + oldlib="$destdir/$name" + func_to_tool_file "$oldlib" func_convert_file_msys_to_w32 + tool_oldlib=$func_to_tool_file_result + + func_show_eval "$install_prog \$file \$oldlib" 'exit $?' + + if test -n "$stripme" && test -n "$old_striplib"; then + func_show_eval "$old_striplib $tool_oldlib" 'exit $?' + fi + + # Do each command in the postinstall commands. + func_execute_cmds "$old_postinstall_cmds" 'exit $?' + done + + test -n "$future_libdirs" && \ + func_warning "remember to run \`$progname --finish$future_libdirs'" + + if test -n "$current_libdirs"; then + # Maybe just do a dry run. + $opt_dry_run && current_libdirs=" -n$current_libdirs" + exec_cmd='$SHELL $progpath $preserve_args --finish$current_libdirs' + else + exit $EXIT_SUCCESS + fi +} + +test "$opt_mode" = install && func_mode_install ${1+"$@"} + + +# func_generate_dlsyms outputname originator pic_p +# Extract symbols from dlprefiles and create ${outputname}S.o with +# a dlpreopen symbol table. +func_generate_dlsyms () +{ + $opt_debug + my_outputname="$1" + my_originator="$2" + my_pic_p="${3-no}" + my_prefix=`$ECHO "$my_originator" | sed 's%[^a-zA-Z0-9]%_%g'` + my_dlsyms= + + if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then + if test -n "$NM" && test -n "$global_symbol_pipe"; then + my_dlsyms="${my_outputname}S.c" + else + func_error "not configured to extract global symbols from dlpreopened files" + fi + fi + + if test -n "$my_dlsyms"; then + case $my_dlsyms in + "") ;; + *.c) + # Discover the nlist of each of the dlfiles. + nlist="$output_objdir/${my_outputname}.nm" + + func_show_eval "$RM $nlist ${nlist}S ${nlist}T" + + # Parse the name list into a source file. + func_verbose "creating $output_objdir/$my_dlsyms" + + $opt_dry_run || $ECHO > "$output_objdir/$my_dlsyms" "\ +/* $my_dlsyms - symbol resolution table for \`$my_outputname' dlsym emulation. */ +/* Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION */ + +#ifdef __cplusplus +extern \"C\" { +#endif + +#if defined(__GNUC__) && (((__GNUC__ == 4) && (__GNUC_MINOR__ >= 4)) || (__GNUC__ > 4)) +#pragma GCC diagnostic ignored \"-Wstrict-prototypes\" +#endif + +/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */ +#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE) +/* DATA imports from DLLs on WIN32 con't be const, because runtime + relocations are performed -- see ld's documentation on pseudo-relocs. */ +# define LT_DLSYM_CONST +#elif defined(__osf__) +/* This system does not cope well with relocations in const data. */ +# define LT_DLSYM_CONST +#else +# define LT_DLSYM_CONST const +#endif + +/* External symbol declarations for the compiler. */\ +" + + if test "$dlself" = yes; then + func_verbose "generating symbol list for \`$output'" + + $opt_dry_run || echo ': @PROGRAM@ ' > "$nlist" + + # Add our own program objects to the symbol list. + progfiles=`$ECHO "$objs$old_deplibs" | $SP2NL | $SED "$lo2o" | $NL2SP` + for progfile in $progfiles; do + func_to_tool_file "$progfile" func_convert_file_msys_to_w32 + func_verbose "extracting global C symbols from \`$func_to_tool_file_result'" + $opt_dry_run || eval "$NM $func_to_tool_file_result | $global_symbol_pipe >> '$nlist'" + done + + if test -n "$exclude_expsyms"; then + $opt_dry_run || { + eval '$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T' + eval '$MV "$nlist"T "$nlist"' + } + fi + + if test -n "$export_symbols_regex"; then + $opt_dry_run || { + eval '$EGREP -e "$export_symbols_regex" "$nlist" > "$nlist"T' + eval '$MV "$nlist"T "$nlist"' + } + fi + + # Prepare the list of exported symbols + if test -z "$export_symbols"; then + export_symbols="$output_objdir/$outputname.exp" + $opt_dry_run || { + $RM $export_symbols + eval "${SED} -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"' + case $host in + *cygwin* | *mingw* | *cegcc* ) + eval "echo EXPORTS "'> "$output_objdir/$outputname.def"' + eval 'cat "$export_symbols" >> "$output_objdir/$outputname.def"' + ;; + esac + } + else + $opt_dry_run || { + eval "${SED} -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"' + eval '$GREP -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T' + eval '$MV "$nlist"T "$nlist"' + case $host in + *cygwin* | *mingw* | *cegcc* ) + eval "echo EXPORTS "'> "$output_objdir/$outputname.def"' + eval 'cat "$nlist" >> "$output_objdir/$outputname.def"' + ;; + esac + } + fi + fi + + for dlprefile in $dlprefiles; do + func_verbose "extracting global C symbols from \`$dlprefile'" + func_basename "$dlprefile" + name="$func_basename_result" + case $host in + *cygwin* | *mingw* | *cegcc* ) + # if an import library, we need to obtain dlname + if func_win32_import_lib_p "$dlprefile"; then + func_tr_sh "$dlprefile" + eval "curr_lafile=\$libfile_$func_tr_sh_result" + dlprefile_dlbasename="" + if test -n "$curr_lafile" && func_lalib_p "$curr_lafile"; then + # Use subshell, to avoid clobbering current variable values + dlprefile_dlname=`source "$curr_lafile" && echo "$dlname"` + if test -n "$dlprefile_dlname" ; then + func_basename "$dlprefile_dlname" + dlprefile_dlbasename="$func_basename_result" + else + # no lafile. user explicitly requested -dlpreopen . + $sharedlib_from_linklib_cmd "$dlprefile" + dlprefile_dlbasename=$sharedlib_from_linklib_result + fi + fi + $opt_dry_run || { + if test -n "$dlprefile_dlbasename" ; then + eval '$ECHO ": $dlprefile_dlbasename" >> "$nlist"' + else + func_warning "Could not compute DLL name from $name" + eval '$ECHO ": $name " >> "$nlist"' + fi + func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32 + eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe | + $SED -e '/I __imp/d' -e 's/I __nm_/D /;s/_nm__//' >> '$nlist'" + } + else # not an import lib + $opt_dry_run || { + eval '$ECHO ": $name " >> "$nlist"' + func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32 + eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe >> '$nlist'" + } + fi + ;; + *) + $opt_dry_run || { + eval '$ECHO ": $name " >> "$nlist"' + func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32 + eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe >> '$nlist'" + } + ;; + esac + done + + $opt_dry_run || { + # Make sure we have at least an empty file. + test -f "$nlist" || : > "$nlist" + + if test -n "$exclude_expsyms"; then + $EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T + $MV "$nlist"T "$nlist" + fi + + # Try sorting and uniquifying the output. + if $GREP -v "^: " < "$nlist" | + if sort -k 3 /dev/null 2>&1; then + sort -k 3 + else + sort +2 + fi | + uniq > "$nlist"S; then + : + else + $GREP -v "^: " < "$nlist" > "$nlist"S + fi + + if test -f "$nlist"S; then + eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$my_dlsyms"' + else + echo '/* NONE */' >> "$output_objdir/$my_dlsyms" + fi + + echo >> "$output_objdir/$my_dlsyms" "\ + +/* The mapping between symbol names and symbols. */ +typedef struct { + const char *name; + void *address; +} lt_dlsymlist; +extern LT_DLSYM_CONST lt_dlsymlist +lt_${my_prefix}_LTX_preloaded_symbols[]; +LT_DLSYM_CONST lt_dlsymlist +lt_${my_prefix}_LTX_preloaded_symbols[] = +{\ + { \"$my_originator\", (void *) 0 }," + + case $need_lib_prefix in + no) + eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$my_dlsyms" + ;; + *) + eval "$global_symbol_to_c_name_address_lib_prefix" < "$nlist" >> "$output_objdir/$my_dlsyms" + ;; + esac + echo >> "$output_objdir/$my_dlsyms" "\ + {0, (void *) 0} +}; + +/* This works around a problem in FreeBSD linker */ +#ifdef FREEBSD_WORKAROUND +static const void *lt_preloaded_setup() { + return lt_${my_prefix}_LTX_preloaded_symbols; +} +#endif + +#ifdef __cplusplus +} +#endif\ +" + } # !$opt_dry_run + + pic_flag_for_symtable= + case "$compile_command " in + *" -static "*) ;; + *) + case $host in + # compiling the symbol table file with pic_flag works around + # a FreeBSD bug that causes programs to crash when -lm is + # linked before any other PIC object. But we must not use + # pic_flag when linking with -static. The problem exists in + # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1. + *-*-freebsd2.*|*-*-freebsd3.0*|*-*-freebsdelf3.0*) + pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND" ;; + *-*-hpux*) + pic_flag_for_symtable=" $pic_flag" ;; + *) + if test "X$my_pic_p" != Xno; then + pic_flag_for_symtable=" $pic_flag" + fi + ;; + esac + ;; + esac + symtab_cflags= + for arg in $LTCFLAGS; do + case $arg in + -pie | -fpie | -fPIE) ;; + *) func_append symtab_cflags " $arg" ;; + esac + done + + # Now compile the dynamic symbol file. + func_show_eval '(cd $output_objdir && $LTCC$symtab_cflags -c$no_builtin_flag$pic_flag_for_symtable "$my_dlsyms")' 'exit $?' + + # Clean up the generated files. + func_show_eval '$RM "$output_objdir/$my_dlsyms" "$nlist" "${nlist}S" "${nlist}T"' + + # Transform the symbol file into the correct name. + symfileobj="$output_objdir/${my_outputname}S.$objext" + case $host in + *cygwin* | *mingw* | *cegcc* ) + if test -f "$output_objdir/$my_outputname.def"; then + compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"` + finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"` + else + compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$symfileobj%"` + finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$symfileobj%"` + fi + ;; + *) + compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$symfileobj%"` + finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$symfileobj%"` + ;; + esac + ;; + *) + func_fatal_error "unknown suffix for \`$my_dlsyms'" + ;; + esac + else + # We keep going just in case the user didn't refer to + # lt_preloaded_symbols. The linker will fail if global_symbol_pipe + # really was required. + + # Nullify the symbol file. + compile_command=`$ECHO "$compile_command" | $SED "s% @SYMFILE@%%"` + finalize_command=`$ECHO "$finalize_command" | $SED "s% @SYMFILE@%%"` + fi +} + +# func_win32_libid arg +# return the library type of file 'arg' +# +# Need a lot of goo to handle *both* DLLs and import libs +# Has to be a shell function in order to 'eat' the argument +# that is supplied when $file_magic_command is called. +# Despite the name, also deal with 64 bit binaries. +func_win32_libid () +{ + $opt_debug + win32_libid_type="unknown" + win32_fileres=`file -L $1 2>/dev/null` + case $win32_fileres in + *ar\ archive\ import\ library*) # definitely import + win32_libid_type="x86 archive import" + ;; + *ar\ archive*) # could be an import, or static + # Keep the egrep pattern in sync with the one in _LT_CHECK_MAGIC_METHOD. + if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null | + $EGREP 'file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)' >/dev/null; then + func_to_tool_file "$1" func_convert_file_msys_to_w32 + win32_nmres=`eval $NM -f posix -A \"$func_to_tool_file_result\" | + $SED -n -e ' + 1,100{ + / I /{ + s,.*,import, + p + q + } + }'` + case $win32_nmres in + import*) win32_libid_type="x86 archive import";; + *) win32_libid_type="x86 archive static";; + esac + fi + ;; + *DLL*) + win32_libid_type="x86 DLL" + ;; + *executable*) # but shell scripts are "executable" too... + case $win32_fileres in + *MS\ Windows\ PE\ Intel*) + win32_libid_type="x86 DLL" + ;; + esac + ;; + esac + $ECHO "$win32_libid_type" +} + +# func_cygming_dll_for_implib ARG +# +# Platform-specific function to extract the +# name of the DLL associated with the specified +# import library ARG. +# Invoked by eval'ing the libtool variable +# $sharedlib_from_linklib_cmd +# Result is available in the variable +# $sharedlib_from_linklib_result +func_cygming_dll_for_implib () +{ + $opt_debug + sharedlib_from_linklib_result=`$DLLTOOL --identify-strict --identify "$1"` +} + +# func_cygming_dll_for_implib_fallback_core SECTION_NAME LIBNAMEs +# +# The is the core of a fallback implementation of a +# platform-specific function to extract the name of the +# DLL associated with the specified import library LIBNAME. +# +# SECTION_NAME is either .idata$6 or .idata$7, depending +# on the platform and compiler that created the implib. +# +# Echos the name of the DLL associated with the +# specified import library. +func_cygming_dll_for_implib_fallback_core () +{ + $opt_debug + match_literal=`$ECHO "$1" | $SED "$sed_make_literal_regex"` + $OBJDUMP -s --section "$1" "$2" 2>/dev/null | + $SED '/^Contents of section '"$match_literal"':/{ + # Place marker at beginning of archive member dllname section + s/.*/====MARK====/ + p + d + } + # These lines can sometimes be longer than 43 characters, but + # are always uninteresting + /:[ ]*file format pe[i]\{,1\}-/d + /^In archive [^:]*:/d + # Ensure marker is printed + /^====MARK====/p + # Remove all lines with less than 43 characters + /^.\{43\}/!d + # From remaining lines, remove first 43 characters + s/^.\{43\}//' | + $SED -n ' + # Join marker and all lines until next marker into a single line + /^====MARK====/ b para + H + $ b para + b + :para + x + s/\n//g + # Remove the marker + s/^====MARK====// + # Remove trailing dots and whitespace + s/[\. \t]*$// + # Print + /./p' | + # we now have a list, one entry per line, of the stringified + # contents of the appropriate section of all members of the + # archive which possess that section. Heuristic: eliminate + # all those which have a first or second character that is + # a '.' (that is, objdump's representation of an unprintable + # character.) This should work for all archives with less than + # 0x302f exports -- but will fail for DLLs whose name actually + # begins with a literal '.' or a single character followed by + # a '.'. + # + # Of those that remain, print the first one. + $SED -e '/^\./d;/^.\./d;q' +} + +# func_cygming_gnu_implib_p ARG +# This predicate returns with zero status (TRUE) if +# ARG is a GNU/binutils-style import library. Returns +# with nonzero status (FALSE) otherwise. +func_cygming_gnu_implib_p () +{ + $opt_debug + func_to_tool_file "$1" func_convert_file_msys_to_w32 + func_cygming_gnu_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $EGREP ' (_head_[A-Za-z0-9_]+_[ad]l*|[A-Za-z0-9_]+_[ad]l*_iname)$'` + test -n "$func_cygming_gnu_implib_tmp" +} + +# func_cygming_ms_implib_p ARG +# This predicate returns with zero status (TRUE) if +# ARG is an MS-style import library. Returns +# with nonzero status (FALSE) otherwise. +func_cygming_ms_implib_p () +{ + $opt_debug + func_to_tool_file "$1" func_convert_file_msys_to_w32 + func_cygming_ms_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $GREP '_NULL_IMPORT_DESCRIPTOR'` + test -n "$func_cygming_ms_implib_tmp" +} + +# func_cygming_dll_for_implib_fallback ARG +# Platform-specific function to extract the +# name of the DLL associated with the specified +# import library ARG. +# +# This fallback implementation is for use when $DLLTOOL +# does not support the --identify-strict option. +# Invoked by eval'ing the libtool variable +# $sharedlib_from_linklib_cmd +# Result is available in the variable +# $sharedlib_from_linklib_result +func_cygming_dll_for_implib_fallback () +{ + $opt_debug + if func_cygming_gnu_implib_p "$1" ; then + # binutils import library + sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$7' "$1"` + elif func_cygming_ms_implib_p "$1" ; then + # ms-generated import library + sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$6' "$1"` + else + # unknown + sharedlib_from_linklib_result="" + fi +} + + +# func_extract_an_archive dir oldlib +func_extract_an_archive () +{ + $opt_debug + f_ex_an_ar_dir="$1"; shift + f_ex_an_ar_oldlib="$1" + if test "$lock_old_archive_extraction" = yes; then + lockfile=$f_ex_an_ar_oldlib.lock + until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do + func_echo "Waiting for $lockfile to be removed" + sleep 2 + done + fi + func_show_eval "(cd \$f_ex_an_ar_dir && $AR x \"\$f_ex_an_ar_oldlib\")" \ + 'stat=$?; rm -f "$lockfile"; exit $stat' + if test "$lock_old_archive_extraction" = yes; then + $opt_dry_run || rm -f "$lockfile" + fi + if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then + : + else + func_fatal_error "object name conflicts in archive: $f_ex_an_ar_dir/$f_ex_an_ar_oldlib" + fi +} + + +# func_extract_archives gentop oldlib ... +func_extract_archives () +{ + $opt_debug + my_gentop="$1"; shift + my_oldlibs=${1+"$@"} + my_oldobjs="" + my_xlib="" + my_xabs="" + my_xdir="" + + for my_xlib in $my_oldlibs; do + # Extract the objects. + case $my_xlib in + [\\/]* | [A-Za-z]:[\\/]*) my_xabs="$my_xlib" ;; + *) my_xabs=`pwd`"/$my_xlib" ;; + esac + func_basename "$my_xlib" + my_xlib="$func_basename_result" + my_xlib_u=$my_xlib + while :; do + case " $extracted_archives " in + *" $my_xlib_u "*) + func_arith $extracted_serial + 1 + extracted_serial=$func_arith_result + my_xlib_u=lt$extracted_serial-$my_xlib ;; + *) break ;; + esac + done + extracted_archives="$extracted_archives $my_xlib_u" + my_xdir="$my_gentop/$my_xlib_u" + + func_mkdir_p "$my_xdir" + + case $host in + *-darwin*) + func_verbose "Extracting $my_xabs" + # Do not bother doing anything if just a dry run + $opt_dry_run || { + darwin_orig_dir=`pwd` + cd $my_xdir || exit $? + darwin_archive=$my_xabs + darwin_curdir=`pwd` + darwin_base_archive=`basename "$darwin_archive"` + darwin_arches=`$LIPO -info "$darwin_archive" 2>/dev/null | $GREP Architectures 2>/dev/null || true` + if test -n "$darwin_arches"; then + darwin_arches=`$ECHO "$darwin_arches" | $SED -e 's/.*are://'` + darwin_arch= + func_verbose "$darwin_base_archive has multiple architectures $darwin_arches" + for darwin_arch in $darwin_arches ; do + func_mkdir_p "unfat-$$/${darwin_base_archive}-${darwin_arch}" + $LIPO -thin $darwin_arch -output "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" "${darwin_archive}" + cd "unfat-$$/${darwin_base_archive}-${darwin_arch}" + func_extract_an_archive "`pwd`" "${darwin_base_archive}" + cd "$darwin_curdir" + $RM "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" + done # $darwin_arches + ## Okay now we've a bunch of thin objects, gotta fatten them up :) + darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print | $SED -e "$basename" | sort -u` + darwin_file= + darwin_files= + for darwin_file in $darwin_filelist; do + darwin_files=`find unfat-$$ -name $darwin_file -print | sort | $NL2SP` + $LIPO -create -output "$darwin_file" $darwin_files + done # $darwin_filelist + $RM -rf unfat-$$ + cd "$darwin_orig_dir" + else + cd $darwin_orig_dir + func_extract_an_archive "$my_xdir" "$my_xabs" + fi # $darwin_arches + } # !$opt_dry_run + ;; + *) + func_extract_an_archive "$my_xdir" "$my_xabs" + ;; + esac + my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | sort | $NL2SP` + done + + func_extract_archives_result="$my_oldobjs" +} + + +# func_emit_wrapper [arg=no] +# +# Emit a libtool wrapper script on stdout. +# Don't directly open a file because we may want to +# incorporate the script contents within a cygwin/mingw +# wrapper executable. Must ONLY be called from within +# func_mode_link because it depends on a number of variables +# set therein. +# +# ARG is the value that the WRAPPER_SCRIPT_BELONGS_IN_OBJDIR +# variable will take. If 'yes', then the emitted script +# will assume that the directory in which it is stored is +# the $objdir directory. This is a cygwin/mingw-specific +# behavior. +func_emit_wrapper () +{ + func_emit_wrapper_arg1=${1-no} + + $ECHO "\ +#! $SHELL + +# $output - temporary wrapper script for $objdir/$outputname +# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION +# +# The $output program cannot be directly executed until all the libtool +# libraries that it depends on are installed. +# +# This wrapper script should never be moved out of the build directory. +# If it is, it will not operate correctly. + +# Sed substitution that helps us do robust quoting. It backslashifies +# metacharacters that are still active within double-quoted strings. +sed_quote_subst='$sed_quote_subst' + +# Be Bourne compatible +if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then + emulate sh + NULLCMD=: + # Zsh 3.x and 4.x performs word splitting on \${1+\"\$@\"}, which + # is contrary to our usage. Disable this feature. + alias -g '\${1+\"\$@\"}'='\"\$@\"' + setopt NO_GLOB_SUBST +else + case \`(set -o) 2>/dev/null\` in *posix*) set -o posix;; esac +fi +BIN_SH=xpg4; export BIN_SH # for Tru64 +DUALCASE=1; export DUALCASE # for MKS sh + +# The HP-UX ksh and POSIX shell print the target directory to stdout +# if CDPATH is set. +(unset CDPATH) >/dev/null 2>&1 && unset CDPATH + +relink_command=\"$relink_command\" + +# This environment variable determines our operation mode. +if test \"\$libtool_install_magic\" = \"$magic\"; then + # install mode needs the following variables: + generated_by_libtool_version='$macro_version' + notinst_deplibs='$notinst_deplibs' +else + # When we are sourced in execute mode, \$file and \$ECHO are already set. + if test \"\$libtool_execute_magic\" != \"$magic\"; then + file=\"\$0\"" + + qECHO=`$ECHO "$ECHO" | $SED "$sed_quote_subst"` + $ECHO "\ + +# A function that is used when there is no print builtin or printf. +func_fallback_echo () +{ + eval 'cat <<_LTECHO_EOF +\$1 +_LTECHO_EOF' +} + ECHO=\"$qECHO\" + fi + +# Very basic option parsing. These options are (a) specific to +# the libtool wrapper, (b) are identical between the wrapper +# /script/ and the wrapper /executable/ which is used only on +# windows platforms, and (c) all begin with the string "--lt-" +# (application programs are unlikely to have options which match +# this pattern). +# +# There are only two supported options: --lt-debug and +# --lt-dump-script. There is, deliberately, no --lt-help. +# +# The first argument to this parsing function should be the +# script's $0 value, followed by "$@". +lt_option_debug= +func_parse_lt_options () +{ + lt_script_arg0=\$0 + shift + for lt_opt + do + case \"\$lt_opt\" in + --lt-debug) lt_option_debug=1 ;; + --lt-dump-script) + lt_dump_D=\`\$ECHO \"X\$lt_script_arg0\" | $SED -e 's/^X//' -e 's%/[^/]*$%%'\` + test \"X\$lt_dump_D\" = \"X\$lt_script_arg0\" && lt_dump_D=. + lt_dump_F=\`\$ECHO \"X\$lt_script_arg0\" | $SED -e 's/^X//' -e 's%^.*/%%'\` + cat \"\$lt_dump_D/\$lt_dump_F\" + exit 0 + ;; + --lt-*) + \$ECHO \"Unrecognized --lt- option: '\$lt_opt'\" 1>&2 + exit 1 + ;; + esac + done + + # Print the debug banner immediately: + if test -n \"\$lt_option_debug\"; then + echo \"${outputname}:${output}:\${LINENO}: libtool wrapper (GNU $PACKAGE$TIMESTAMP) $VERSION\" 1>&2 + fi +} + +# Used when --lt-debug. Prints its arguments to stdout +# (redirection is the responsibility of the caller) +func_lt_dump_args () +{ + lt_dump_args_N=1; + for lt_arg + do + \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[\$lt_dump_args_N]: \$lt_arg\" + lt_dump_args_N=\`expr \$lt_dump_args_N + 1\` + done +} + +# Core function for launching the target application +func_exec_program_core () +{ +" + case $host in + # Backslashes separate directories on plain windows + *-*-mingw | *-*-os2* | *-cegcc*) + $ECHO "\ + if test -n \"\$lt_option_debug\"; then + \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[0]: \$progdir\\\\\$program\" 1>&2 + func_lt_dump_args \${1+\"\$@\"} 1>&2 + fi + exec \"\$progdir\\\\\$program\" \${1+\"\$@\"} +" + ;; + + *) + $ECHO "\ + if test -n \"\$lt_option_debug\"; then + \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[0]: \$progdir/\$program\" 1>&2 + func_lt_dump_args \${1+\"\$@\"} 1>&2 + fi + exec \"\$progdir/\$program\" \${1+\"\$@\"} +" + ;; + esac + $ECHO "\ + \$ECHO \"\$0: cannot exec \$program \$*\" 1>&2 + exit 1 +} + +# A function to encapsulate launching the target application +# Strips options in the --lt-* namespace from \$@ and +# launches target application with the remaining arguments. +func_exec_program () +{ + case \" \$* \" in + *\\ --lt-*) + for lt_wr_arg + do + case \$lt_wr_arg in + --lt-*) ;; + *) set x \"\$@\" \"\$lt_wr_arg\"; shift;; + esac + shift + done ;; + esac + func_exec_program_core \${1+\"\$@\"} +} + + # Parse options + func_parse_lt_options \"\$0\" \${1+\"\$@\"} + + # Find the directory that this script lives in. + thisdir=\`\$ECHO \"\$file\" | $SED 's%/[^/]*$%%'\` + test \"x\$thisdir\" = \"x\$file\" && thisdir=. + + # Follow symbolic links until we get to the real thisdir. + file=\`ls -ld \"\$file\" | $SED -n 's/.*-> //p'\` + while test -n \"\$file\"; do + destdir=\`\$ECHO \"\$file\" | $SED 's%/[^/]*\$%%'\` + + # If there was a directory component, then change thisdir. + if test \"x\$destdir\" != \"x\$file\"; then + case \"\$destdir\" in + [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;; + *) thisdir=\"\$thisdir/\$destdir\" ;; + esac + fi + + file=\`\$ECHO \"\$file\" | $SED 's%^.*/%%'\` + file=\`ls -ld \"\$thisdir/\$file\" | $SED -n 's/.*-> //p'\` + done + + # Usually 'no', except on cygwin/mingw when embedded into + # the cwrapper. + WRAPPER_SCRIPT_BELONGS_IN_OBJDIR=$func_emit_wrapper_arg1 + if test \"\$WRAPPER_SCRIPT_BELONGS_IN_OBJDIR\" = \"yes\"; then + # special case for '.' + if test \"\$thisdir\" = \".\"; then + thisdir=\`pwd\` + fi + # remove .libs from thisdir + case \"\$thisdir\" in + *[\\\\/]$objdir ) thisdir=\`\$ECHO \"\$thisdir\" | $SED 's%[\\\\/][^\\\\/]*$%%'\` ;; + $objdir ) thisdir=. ;; + esac + fi + + # Try to get the absolute directory name. + absdir=\`cd \"\$thisdir\" && pwd\` + test -n \"\$absdir\" && thisdir=\"\$absdir\" +" + + if test "$fast_install" = yes; then + $ECHO "\ + program=lt-'$outputname'$exeext + progdir=\"\$thisdir/$objdir\" + + if test ! -f \"\$progdir/\$program\" || + { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\ + test \"X\$file\" != \"X\$progdir/\$program\"; }; then + + file=\"\$\$-\$program\" + + if test ! -d \"\$progdir\"; then + $MKDIR \"\$progdir\" + else + $RM \"\$progdir/\$file\" + fi" + + $ECHO "\ + + # relink executable if necessary + if test -n \"\$relink_command\"; then + if relink_command_output=\`eval \$relink_command 2>&1\`; then : + else + $ECHO \"\$relink_command_output\" >&2 + $RM \"\$progdir/\$file\" + exit 1 + fi + fi + + $MV \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null || + { $RM \"\$progdir/\$program\"; + $MV \"\$progdir/\$file\" \"\$progdir/\$program\"; } + $RM \"\$progdir/\$file\" + fi" + else + $ECHO "\ + program='$outputname' + progdir=\"\$thisdir/$objdir\" +" + fi + + $ECHO "\ + + if test -f \"\$progdir/\$program\"; then" + + # fixup the dll searchpath if we need to. + # + # Fix the DLL searchpath if we need to. Do this before prepending + # to shlibpath, because on Windows, both are PATH and uninstalled + # libraries must come first. + if test -n "$dllsearchpath"; then + $ECHO "\ + # Add the dll search path components to the executable PATH + PATH=$dllsearchpath:\$PATH +" + fi + + # Export our shlibpath_var if we have one. + if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then + $ECHO "\ + # Add our own library path to $shlibpath_var + $shlibpath_var=\"$temp_rpath\$$shlibpath_var\" + + # Some systems cannot cope with colon-terminated $shlibpath_var + # The second colon is a workaround for a bug in BeOS R4 sed + $shlibpath_var=\`\$ECHO \"\$$shlibpath_var\" | $SED 's/::*\$//'\` + + export $shlibpath_var +" + fi + + $ECHO "\ + if test \"\$libtool_execute_magic\" != \"$magic\"; then + # Run the actual program with our arguments. + func_exec_program \${1+\"\$@\"} + fi + else + # The program doesn't exist. + \$ECHO \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2 + \$ECHO \"This script is just a wrapper for \$program.\" 1>&2 + \$ECHO \"See the $PACKAGE documentation for more information.\" 1>&2 + exit 1 + fi +fi\ +" +} + + +# func_emit_cwrapperexe_src +# emit the source code for a wrapper executable on stdout +# Must ONLY be called from within func_mode_link because +# it depends on a number of variable set therein. +func_emit_cwrapperexe_src () +{ + cat < +#include +#ifdef _MSC_VER +# include +# include +# include +#else +# include +# include +# ifdef __CYGWIN__ +# include +# endif +#endif +#include +#include +#include +#include +#include +#include +#include +#include + +/* declarations of non-ANSI functions */ +#if defined(__MINGW32__) +# ifdef __STRICT_ANSI__ +int _putenv (const char *); +# endif +#elif defined(__CYGWIN__) +# ifdef __STRICT_ANSI__ +char *realpath (const char *, char *); +int putenv (char *); +int setenv (const char *, const char *, int); +# endif +/* #elif defined (other platforms) ... */ +#endif + +/* portability defines, excluding path handling macros */ +#if defined(_MSC_VER) +# define setmode _setmode +# define stat _stat +# define chmod _chmod +# define getcwd _getcwd +# define putenv _putenv +# define S_IXUSR _S_IEXEC +# ifndef _INTPTR_T_DEFINED +# define _INTPTR_T_DEFINED +# define intptr_t int +# endif +#elif defined(__MINGW32__) +# define setmode _setmode +# define stat _stat +# define chmod _chmod +# define getcwd _getcwd +# define putenv _putenv +#elif defined(__CYGWIN__) +# define HAVE_SETENV +# define FOPEN_WB "wb" +/* #elif defined (other platforms) ... */ +#endif + +#if defined(PATH_MAX) +# define LT_PATHMAX PATH_MAX +#elif defined(MAXPATHLEN) +# define LT_PATHMAX MAXPATHLEN +#else +# define LT_PATHMAX 1024 +#endif + +#ifndef S_IXOTH +# define S_IXOTH 0 +#endif +#ifndef S_IXGRP +# define S_IXGRP 0 +#endif + +/* path handling portability macros */ +#ifndef DIR_SEPARATOR +# define DIR_SEPARATOR '/' +# define PATH_SEPARATOR ':' +#endif + +#if defined (_WIN32) || defined (__MSDOS__) || defined (__DJGPP__) || \ + defined (__OS2__) +# define HAVE_DOS_BASED_FILE_SYSTEM +# define FOPEN_WB "wb" +# ifndef DIR_SEPARATOR_2 +# define DIR_SEPARATOR_2 '\\' +# endif +# ifndef PATH_SEPARATOR_2 +# define PATH_SEPARATOR_2 ';' +# endif +#endif + +#ifndef DIR_SEPARATOR_2 +# define IS_DIR_SEPARATOR(ch) ((ch) == DIR_SEPARATOR) +#else /* DIR_SEPARATOR_2 */ +# define IS_DIR_SEPARATOR(ch) \ + (((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2)) +#endif /* DIR_SEPARATOR_2 */ + +#ifndef PATH_SEPARATOR_2 +# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR) +#else /* PATH_SEPARATOR_2 */ +# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2) +#endif /* PATH_SEPARATOR_2 */ + +#ifndef FOPEN_WB +# define FOPEN_WB "w" +#endif +#ifndef _O_BINARY +# define _O_BINARY 0 +#endif + +#define XMALLOC(type, num) ((type *) xmalloc ((num) * sizeof(type))) +#define XFREE(stale) do { \ + if (stale) { free ((void *) stale); stale = 0; } \ +} while (0) + +#if defined(LT_DEBUGWRAPPER) +static int lt_debug = 1; +#else +static int lt_debug = 0; +#endif + +const char *program_name = "libtool-wrapper"; /* in case xstrdup fails */ + +void *xmalloc (size_t num); +char *xstrdup (const char *string); +const char *base_name (const char *name); +char *find_executable (const char *wrapper); +char *chase_symlinks (const char *pathspec); +int make_executable (const char *path); +int check_executable (const char *path); +char *strendzap (char *str, const char *pat); +void lt_debugprintf (const char *file, int line, const char *fmt, ...); +void lt_fatal (const char *file, int line, const char *message, ...); +static const char *nonnull (const char *s); +static const char *nonempty (const char *s); +void lt_setenv (const char *name, const char *value); +char *lt_extend_str (const char *orig_value, const char *add, int to_end); +void lt_update_exe_path (const char *name, const char *value); +void lt_update_lib_path (const char *name, const char *value); +char **prepare_spawn (char **argv); +void lt_dump_script (FILE *f); +EOF + + cat <= 0) + && (st.st_mode & (S_IXUSR | S_IXGRP | S_IXOTH))) + return 1; + else + return 0; +} + +int +make_executable (const char *path) +{ + int rval = 0; + struct stat st; + + lt_debugprintf (__FILE__, __LINE__, "(make_executable): %s\n", + nonempty (path)); + if ((!path) || (!*path)) + return 0; + + if (stat (path, &st) >= 0) + { + rval = chmod (path, st.st_mode | S_IXOTH | S_IXGRP | S_IXUSR); + } + return rval; +} + +/* Searches for the full path of the wrapper. Returns + newly allocated full path name if found, NULL otherwise + Does not chase symlinks, even on platforms that support them. +*/ +char * +find_executable (const char *wrapper) +{ + int has_slash = 0; + const char *p; + const char *p_next; + /* static buffer for getcwd */ + char tmp[LT_PATHMAX + 1]; + int tmp_len; + char *concat_name; + + lt_debugprintf (__FILE__, __LINE__, "(find_executable): %s\n", + nonempty (wrapper)); + + if ((wrapper == NULL) || (*wrapper == '\0')) + return NULL; + + /* Absolute path? */ +#if defined (HAVE_DOS_BASED_FILE_SYSTEM) + if (isalpha ((unsigned char) wrapper[0]) && wrapper[1] == ':') + { + concat_name = xstrdup (wrapper); + if (check_executable (concat_name)) + return concat_name; + XFREE (concat_name); + } + else + { +#endif + if (IS_DIR_SEPARATOR (wrapper[0])) + { + concat_name = xstrdup (wrapper); + if (check_executable (concat_name)) + return concat_name; + XFREE (concat_name); + } +#if defined (HAVE_DOS_BASED_FILE_SYSTEM) + } +#endif + + for (p = wrapper; *p; p++) + if (*p == '/') + { + has_slash = 1; + break; + } + if (!has_slash) + { + /* no slashes; search PATH */ + const char *path = getenv ("PATH"); + if (path != NULL) + { + for (p = path; *p; p = p_next) + { + const char *q; + size_t p_len; + for (q = p; *q; q++) + if (IS_PATH_SEPARATOR (*q)) + break; + p_len = q - p; + p_next = (*q == '\0' ? q : q + 1); + if (p_len == 0) + { + /* empty path: current directory */ + if (getcwd (tmp, LT_PATHMAX) == NULL) + lt_fatal (__FILE__, __LINE__, "getcwd failed: %s", + nonnull (strerror (errno))); + tmp_len = strlen (tmp); + concat_name = + XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1); + memcpy (concat_name, tmp, tmp_len); + concat_name[tmp_len] = '/'; + strcpy (concat_name + tmp_len + 1, wrapper); + } + else + { + concat_name = + XMALLOC (char, p_len + 1 + strlen (wrapper) + 1); + memcpy (concat_name, p, p_len); + concat_name[p_len] = '/'; + strcpy (concat_name + p_len + 1, wrapper); + } + if (check_executable (concat_name)) + return concat_name; + XFREE (concat_name); + } + } + /* not found in PATH; assume curdir */ + } + /* Relative path | not found in path: prepend cwd */ + if (getcwd (tmp, LT_PATHMAX) == NULL) + lt_fatal (__FILE__, __LINE__, "getcwd failed: %s", + nonnull (strerror (errno))); + tmp_len = strlen (tmp); + concat_name = XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1); + memcpy (concat_name, tmp, tmp_len); + concat_name[tmp_len] = '/'; + strcpy (concat_name + tmp_len + 1, wrapper); + + if (check_executable (concat_name)) + return concat_name; + XFREE (concat_name); + return NULL; +} + +char * +chase_symlinks (const char *pathspec) +{ +#ifndef S_ISLNK + return xstrdup (pathspec); +#else + char buf[LT_PATHMAX]; + struct stat s; + char *tmp_pathspec = xstrdup (pathspec); + char *p; + int has_symlinks = 0; + while (strlen (tmp_pathspec) && !has_symlinks) + { + lt_debugprintf (__FILE__, __LINE__, + "checking path component for symlinks: %s\n", + tmp_pathspec); + if (lstat (tmp_pathspec, &s) == 0) + { + if (S_ISLNK (s.st_mode) != 0) + { + has_symlinks = 1; + break; + } + + /* search backwards for last DIR_SEPARATOR */ + p = tmp_pathspec + strlen (tmp_pathspec) - 1; + while ((p > tmp_pathspec) && (!IS_DIR_SEPARATOR (*p))) + p--; + if ((p == tmp_pathspec) && (!IS_DIR_SEPARATOR (*p))) + { + /* no more DIR_SEPARATORS left */ + break; + } + *p = '\0'; + } + else + { + lt_fatal (__FILE__, __LINE__, + "error accessing file \"%s\": %s", + tmp_pathspec, nonnull (strerror (errno))); + } + } + XFREE (tmp_pathspec); + + if (!has_symlinks) + { + return xstrdup (pathspec); + } + + tmp_pathspec = realpath (pathspec, buf); + if (tmp_pathspec == 0) + { + lt_fatal (__FILE__, __LINE__, + "could not follow symlinks for %s", pathspec); + } + return xstrdup (tmp_pathspec); +#endif +} + +char * +strendzap (char *str, const char *pat) +{ + size_t len, patlen; + + assert (str != NULL); + assert (pat != NULL); + + len = strlen (str); + patlen = strlen (pat); + + if (patlen <= len) + { + str += len - patlen; + if (strcmp (str, pat) == 0) + *str = '\0'; + } + return str; +} + +void +lt_debugprintf (const char *file, int line, const char *fmt, ...) +{ + va_list args; + if (lt_debug) + { + (void) fprintf (stderr, "%s:%s:%d: ", program_name, file, line); + va_start (args, fmt); + (void) vfprintf (stderr, fmt, args); + va_end (args); + } +} + +static void +lt_error_core (int exit_status, const char *file, + int line, const char *mode, + const char *message, va_list ap) +{ + fprintf (stderr, "%s:%s:%d: %s: ", program_name, file, line, mode); + vfprintf (stderr, message, ap); + fprintf (stderr, ".\n"); + + if (exit_status >= 0) + exit (exit_status); +} + +void +lt_fatal (const char *file, int line, const char *message, ...) +{ + va_list ap; + va_start (ap, message); + lt_error_core (EXIT_FAILURE, file, line, "FATAL", message, ap); + va_end (ap); +} + +static const char * +nonnull (const char *s) +{ + return s ? s : "(null)"; +} + +static const char * +nonempty (const char *s) +{ + return (s && !*s) ? "(empty)" : nonnull (s); +} + +void +lt_setenv (const char *name, const char *value) +{ + lt_debugprintf (__FILE__, __LINE__, + "(lt_setenv) setting '%s' to '%s'\n", + nonnull (name), nonnull (value)); + { +#ifdef HAVE_SETENV + /* always make a copy, for consistency with !HAVE_SETENV */ + char *str = xstrdup (value); + setenv (name, str, 1); +#else + int len = strlen (name) + 1 + strlen (value) + 1; + char *str = XMALLOC (char, len); + sprintf (str, "%s=%s", name, value); + if (putenv (str) != EXIT_SUCCESS) + { + XFREE (str); + } +#endif + } +} + +char * +lt_extend_str (const char *orig_value, const char *add, int to_end) +{ + char *new_value; + if (orig_value && *orig_value) + { + int orig_value_len = strlen (orig_value); + int add_len = strlen (add); + new_value = XMALLOC (char, add_len + orig_value_len + 1); + if (to_end) + { + strcpy (new_value, orig_value); + strcpy (new_value + orig_value_len, add); + } + else + { + strcpy (new_value, add); + strcpy (new_value + add_len, orig_value); + } + } + else + { + new_value = xstrdup (add); + } + return new_value; +} + +void +lt_update_exe_path (const char *name, const char *value) +{ + lt_debugprintf (__FILE__, __LINE__, + "(lt_update_exe_path) modifying '%s' by prepending '%s'\n", + nonnull (name), nonnull (value)); + + if (name && *name && value && *value) + { + char *new_value = lt_extend_str (getenv (name), value, 0); + /* some systems can't cope with a ':'-terminated path #' */ + int len = strlen (new_value); + while (((len = strlen (new_value)) > 0) && IS_PATH_SEPARATOR (new_value[len-1])) + { + new_value[len-1] = '\0'; + } + lt_setenv (name, new_value); + XFREE (new_value); + } +} + +void +lt_update_lib_path (const char *name, const char *value) +{ + lt_debugprintf (__FILE__, __LINE__, + "(lt_update_lib_path) modifying '%s' by prepending '%s'\n", + nonnull (name), nonnull (value)); + + if (name && *name && value && *value) + { + char *new_value = lt_extend_str (getenv (name), value, 0); + lt_setenv (name, new_value); + XFREE (new_value); + } +} + +EOF + case $host_os in + mingw*) + cat <<"EOF" + +/* Prepares an argument vector before calling spawn(). + Note that spawn() does not by itself call the command interpreter + (getenv ("COMSPEC") != NULL ? getenv ("COMSPEC") : + ({ OSVERSIONINFO v; v.dwOSVersionInfoSize = sizeof(OSVERSIONINFO); + GetVersionEx(&v); + v.dwPlatformId == VER_PLATFORM_WIN32_NT; + }) ? "cmd.exe" : "command.com"). + Instead it simply concatenates the arguments, separated by ' ', and calls + CreateProcess(). We must quote the arguments since Win32 CreateProcess() + interprets characters like ' ', '\t', '\\', '"' (but not '<' and '>') in a + special way: + - Space and tab are interpreted as delimiters. They are not treated as + delimiters if they are surrounded by double quotes: "...". + - Unescaped double quotes are removed from the input. Their only effect is + that within double quotes, space and tab are treated like normal + characters. + - Backslashes not followed by double quotes are not special. + - But 2*n+1 backslashes followed by a double quote become + n backslashes followed by a double quote (n >= 0): + \" -> " + \\\" -> \" + \\\\\" -> \\" + */ +#define SHELL_SPECIAL_CHARS "\"\\ \001\002\003\004\005\006\007\010\011\012\013\014\015\016\017\020\021\022\023\024\025\026\027\030\031\032\033\034\035\036\037" +#define SHELL_SPACE_CHARS " \001\002\003\004\005\006\007\010\011\012\013\014\015\016\017\020\021\022\023\024\025\026\027\030\031\032\033\034\035\036\037" +char ** +prepare_spawn (char **argv) +{ + size_t argc; + char **new_argv; + size_t i; + + /* Count number of arguments. */ + for (argc = 0; argv[argc] != NULL; argc++) + ; + + /* Allocate new argument vector. */ + new_argv = XMALLOC (char *, argc + 1); + + /* Put quoted arguments into the new argument vector. */ + for (i = 0; i < argc; i++) + { + const char *string = argv[i]; + + if (string[0] == '\0') + new_argv[i] = xstrdup ("\"\""); + else if (strpbrk (string, SHELL_SPECIAL_CHARS) != NULL) + { + int quote_around = (strpbrk (string, SHELL_SPACE_CHARS) != NULL); + size_t length; + unsigned int backslashes; + const char *s; + char *quoted_string; + char *p; + + length = 0; + backslashes = 0; + if (quote_around) + length++; + for (s = string; *s != '\0'; s++) + { + char c = *s; + if (c == '"') + length += backslashes + 1; + length++; + if (c == '\\') + backslashes++; + else + backslashes = 0; + } + if (quote_around) + length += backslashes + 1; + + quoted_string = XMALLOC (char, length + 1); + + p = quoted_string; + backslashes = 0; + if (quote_around) + *p++ = '"'; + for (s = string; *s != '\0'; s++) + { + char c = *s; + if (c == '"') + { + unsigned int j; + for (j = backslashes + 1; j > 0; j--) + *p++ = '\\'; + } + *p++ = c; + if (c == '\\') + backslashes++; + else + backslashes = 0; + } + if (quote_around) + { + unsigned int j; + for (j = backslashes; j > 0; j--) + *p++ = '\\'; + *p++ = '"'; + } + *p = '\0'; + + new_argv[i] = quoted_string; + } + else + new_argv[i] = (char *) string; + } + new_argv[argc] = NULL; + + return new_argv; +} +EOF + ;; + esac + + cat <<"EOF" +void lt_dump_script (FILE* f) +{ +EOF + func_emit_wrapper yes | + $SED -n -e ' +s/^\(.\{79\}\)\(..*\)/\1\ +\2/ +h +s/\([\\"]\)/\\\1/g +s/$/\\n/ +s/\([^\n]*\).*/ fputs ("\1", f);/p +g +D' + cat <<"EOF" +} +EOF +} +# end: func_emit_cwrapperexe_src + +# func_win32_import_lib_p ARG +# True if ARG is an import lib, as indicated by $file_magic_cmd +func_win32_import_lib_p () +{ + $opt_debug + case `eval $file_magic_cmd \"\$1\" 2>/dev/null | $SED -e 10q` in + *import*) : ;; + *) false ;; + esac +} + +# func_mode_link arg... +func_mode_link () +{ + $opt_debug + case $host in + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*) + # It is impossible to link a dll without this setting, and + # we shouldn't force the makefile maintainer to figure out + # which system we are compiling for in order to pass an extra + # flag for every libtool invocation. + # allow_undefined=no + + # FIXME: Unfortunately, there are problems with the above when trying + # to make a dll which has undefined symbols, in which case not + # even a static library is built. For now, we need to specify + # -no-undefined on the libtool link line when we can be certain + # that all symbols are satisfied, otherwise we get a static library. + allow_undefined=yes + ;; + *) + allow_undefined=yes + ;; + esac + libtool_args=$nonopt + base_compile="$nonopt $@" + compile_command=$nonopt + finalize_command=$nonopt + + compile_rpath= + finalize_rpath= + compile_shlibpath= + finalize_shlibpath= + convenience= + old_convenience= + deplibs= + old_deplibs= + compiler_flags= + linker_flags= + dllsearchpath= + lib_search_path=`pwd` + inst_prefix_dir= + new_inherited_linker_flags= + + avoid_version=no + bindir= + dlfiles= + dlprefiles= + dlself=no + export_dynamic=no + export_symbols= + export_symbols_regex= + generated= + libobjs= + ltlibs= + module=no + no_install=no + objs= + non_pic_objects= + precious_files_regex= + prefer_static_libs=no + preload=no + prev= + prevarg= + release= + rpath= + xrpath= + perm_rpath= + temp_rpath= + thread_safe=no + vinfo= + vinfo_number=no + weak_libs= + single_module="${wl}-single_module" + func_infer_tag $base_compile + + # We need to know -static, to get the right output filenames. + for arg + do + case $arg in + -shared) + test "$build_libtool_libs" != yes && \ + func_fatal_configuration "can not build a shared library" + build_old_libs=no + break + ;; + -all-static | -static | -static-libtool-libs) + case $arg in + -all-static) + if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then + func_warning "complete static linking is impossible in this configuration" + fi + if test -n "$link_static_flag"; then + dlopen_self=$dlopen_self_static + fi + prefer_static_libs=yes + ;; + -static) + if test -z "$pic_flag" && test -n "$link_static_flag"; then + dlopen_self=$dlopen_self_static + fi + prefer_static_libs=built + ;; + -static-libtool-libs) + if test -z "$pic_flag" && test -n "$link_static_flag"; then + dlopen_self=$dlopen_self_static + fi + prefer_static_libs=yes + ;; + esac + build_libtool_libs=no + build_old_libs=yes + break + ;; + esac + done + + # See if our shared archives depend on static archives. + test -n "$old_archive_from_new_cmds" && build_old_libs=yes + + # Go through the arguments, transforming them on the way. + while test "$#" -gt 0; do + arg="$1" + shift + func_quote_for_eval "$arg" + qarg=$func_quote_for_eval_unquoted_result + func_append libtool_args " $func_quote_for_eval_result" + + # If the previous option needs an argument, assign it. + if test -n "$prev"; then + case $prev in + output) + func_append compile_command " @OUTPUT@" + func_append finalize_command " @OUTPUT@" + ;; + esac + + case $prev in + bindir) + bindir="$arg" + prev= + continue + ;; + dlfiles|dlprefiles) + if test "$preload" = no; then + # Add the symbol object into the linking commands. + func_append compile_command " @SYMFILE@" + func_append finalize_command " @SYMFILE@" + preload=yes + fi + case $arg in + *.la | *.lo) ;; # We handle these cases below. + force) + if test "$dlself" = no; then + dlself=needless + export_dynamic=yes + fi + prev= + continue + ;; + self) + if test "$prev" = dlprefiles; then + dlself=yes + elif test "$prev" = dlfiles && test "$dlopen_self" != yes; then + dlself=yes + else + dlself=needless + export_dynamic=yes + fi + prev= + continue + ;; + *) + if test "$prev" = dlfiles; then + func_append dlfiles " $arg" + else + func_append dlprefiles " $arg" + fi + prev= + continue + ;; + esac + ;; + expsyms) + export_symbols="$arg" + test -f "$arg" \ + || func_fatal_error "symbol file \`$arg' does not exist" + prev= + continue + ;; + expsyms_regex) + export_symbols_regex="$arg" + prev= + continue + ;; + framework) + case $host in + *-*-darwin*) + case "$deplibs " in + *" $qarg.ltframework "*) ;; + *) func_append deplibs " $qarg.ltframework" # this is fixed later + ;; + esac + ;; + esac + prev= + continue + ;; + inst_prefix) + inst_prefix_dir="$arg" + prev= + continue + ;; + objectlist) + if test -f "$arg"; then + save_arg=$arg + moreargs= + for fil in `cat "$save_arg"` + do +# func_append moreargs " $fil" + arg=$fil + # A libtool-controlled object. + + # Check to see that this really is a libtool object. + if func_lalib_unsafe_p "$arg"; then + pic_object= + non_pic_object= + + # Read the .lo file + func_source "$arg" + + if test -z "$pic_object" || + test -z "$non_pic_object" || + test "$pic_object" = none && + test "$non_pic_object" = none; then + func_fatal_error "cannot find name of object for \`$arg'" + fi + + # Extract subdirectory from the argument. + func_dirname "$arg" "/" "" + xdir="$func_dirname_result" + + if test "$pic_object" != none; then + # Prepend the subdirectory the object is found in. + pic_object="$xdir$pic_object" + + if test "$prev" = dlfiles; then + if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then + func_append dlfiles " $pic_object" + prev= + continue + else + # If libtool objects are unsupported, then we need to preload. + prev=dlprefiles + fi + fi + + # CHECK ME: I think I busted this. -Ossama + if test "$prev" = dlprefiles; then + # Preload the old-style object. + func_append dlprefiles " $pic_object" + prev= + fi + + # A PIC object. + func_append libobjs " $pic_object" + arg="$pic_object" + fi + + # Non-PIC object. + if test "$non_pic_object" != none; then + # Prepend the subdirectory the object is found in. + non_pic_object="$xdir$non_pic_object" + + # A standard non-PIC object + func_append non_pic_objects " $non_pic_object" + if test -z "$pic_object" || test "$pic_object" = none ; then + arg="$non_pic_object" + fi + else + # If the PIC object exists, use it instead. + # $xdir was prepended to $pic_object above. + non_pic_object="$pic_object" + func_append non_pic_objects " $non_pic_object" + fi + else + # Only an error if not doing a dry-run. + if $opt_dry_run; then + # Extract subdirectory from the argument. + func_dirname "$arg" "/" "" + xdir="$func_dirname_result" + + func_lo2o "$arg" + pic_object=$xdir$objdir/$func_lo2o_result + non_pic_object=$xdir$func_lo2o_result + func_append libobjs " $pic_object" + func_append non_pic_objects " $non_pic_object" + else + func_fatal_error "\`$arg' is not a valid libtool object" + fi + fi + done + else + func_fatal_error "link input file \`$arg' does not exist" + fi + arg=$save_arg + prev= + continue + ;; + precious_regex) + precious_files_regex="$arg" + prev= + continue + ;; + release) + release="-$arg" + prev= + continue + ;; + rpath | xrpath) + # We need an absolute path. + case $arg in + [\\/]* | [A-Za-z]:[\\/]*) ;; + *) + func_fatal_error "only absolute run-paths are allowed" + ;; + esac + if test "$prev" = rpath; then + case "$rpath " in + *" $arg "*) ;; + *) func_append rpath " $arg" ;; + esac + else + case "$xrpath " in + *" $arg "*) ;; + *) func_append xrpath " $arg" ;; + esac + fi + prev= + continue + ;; + shrext) + shrext_cmds="$arg" + prev= + continue + ;; + weak) + func_append weak_libs " $arg" + prev= + continue + ;; + xcclinker) + func_append linker_flags " $qarg" + func_append compiler_flags " $qarg" + prev= + func_append compile_command " $qarg" + func_append finalize_command " $qarg" + continue + ;; + xcompiler) + func_append compiler_flags " $qarg" + prev= + func_append compile_command " $qarg" + func_append finalize_command " $qarg" + continue + ;; + xlinker) + func_append linker_flags " $qarg" + func_append compiler_flags " $wl$qarg" + prev= + func_append compile_command " $wl$qarg" + func_append finalize_command " $wl$qarg" + continue + ;; + *) + eval "$prev=\"\$arg\"" + prev= + continue + ;; + esac + fi # test -n "$prev" + + prevarg="$arg" + + case $arg in + -all-static) + if test -n "$link_static_flag"; then + # See comment for -static flag below, for more details. + func_append compile_command " $link_static_flag" + func_append finalize_command " $link_static_flag" + fi + continue + ;; + + -allow-undefined) + # FIXME: remove this flag sometime in the future. + func_fatal_error "\`-allow-undefined' must not be used because it is the default" + ;; + + -avoid-version) + avoid_version=yes + continue + ;; + + -bindir) + prev=bindir + continue + ;; + + -dlopen) + prev=dlfiles + continue + ;; + + -dlpreopen) + prev=dlprefiles + continue + ;; + + -export-dynamic) + export_dynamic=yes + continue + ;; + + -export-symbols | -export-symbols-regex) + if test -n "$export_symbols" || test -n "$export_symbols_regex"; then + func_fatal_error "more than one -exported-symbols argument is not allowed" + fi + if test "X$arg" = "X-export-symbols"; then + prev=expsyms + else + prev=expsyms_regex + fi + continue + ;; + + -framework) + prev=framework + continue + ;; + + -inst-prefix-dir) + prev=inst_prefix + continue + ;; + + # The native IRIX linker understands -LANG:*, -LIST:* and -LNO:* + # so, if we see these flags be careful not to treat them like -L + -L[A-Z][A-Z]*:*) + case $with_gcc/$host in + no/*-*-irix* | /*-*-irix*) + func_append compile_command " $arg" + func_append finalize_command " $arg" + ;; + esac + continue + ;; + + -L*) + func_stripname "-L" '' "$arg" + if test -z "$func_stripname_result"; then + if test "$#" -gt 0; then + func_fatal_error "require no space between \`-L' and \`$1'" + else + func_fatal_error "need path for \`-L' option" + fi + fi + func_resolve_sysroot "$func_stripname_result" + dir=$func_resolve_sysroot_result + # We need an absolute path. + case $dir in + [\\/]* | [A-Za-z]:[\\/]*) ;; + *) + absdir=`cd "$dir" && pwd` + test -z "$absdir" && \ + func_fatal_error "cannot determine absolute directory name of \`$dir'" + dir="$absdir" + ;; + esac + case "$deplibs " in + *" -L$dir "* | *" $arg "*) + # Will only happen for absolute or sysroot arguments + ;; + *) + # Preserve sysroot, but never include relative directories + case $dir in + [\\/]* | [A-Za-z]:[\\/]* | =*) func_append deplibs " $arg" ;; + *) func_append deplibs " -L$dir" ;; + esac + func_append lib_search_path " $dir" + ;; + esac + case $host in + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*) + testbindir=`$ECHO "$dir" | $SED 's*/lib$*/bin*'` + case :$dllsearchpath: in + *":$dir:"*) ;; + ::) dllsearchpath=$dir;; + *) func_append dllsearchpath ":$dir";; + esac + case :$dllsearchpath: in + *":$testbindir:"*) ;; + ::) dllsearchpath=$testbindir;; + *) func_append dllsearchpath ":$testbindir";; + esac + ;; + esac + continue + ;; + + -l*) + if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then + case $host in + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos* | *-cegcc* | *-*-haiku*) + # These systems don't actually have a C or math library (as such) + continue + ;; + *-*-os2*) + # These systems don't actually have a C library (as such) + test "X$arg" = "X-lc" && continue + ;; + *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) + # Do not include libc due to us having libc/libc_r. + test "X$arg" = "X-lc" && continue + ;; + *-*-rhapsody* | *-*-darwin1.[012]) + # Rhapsody C and math libraries are in the System framework + func_append deplibs " System.ltframework" + continue + ;; + *-*-sco3.2v5* | *-*-sco5v6*) + # Causes problems with __ctype + test "X$arg" = "X-lc" && continue + ;; + *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*) + # Compiler inserts libc in the correct place for threads to work + test "X$arg" = "X-lc" && continue + ;; + esac + elif test "X$arg" = "X-lc_r"; then + case $host in + *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) + # Do not include libc_r directly, use -pthread flag. + continue + ;; + esac + fi + func_append deplibs " $arg" + continue + ;; + + -module) + module=yes + continue + ;; + + # Tru64 UNIX uses -model [arg] to determine the layout of C++ + # classes, name mangling, and exception handling. + # Darwin uses the -arch flag to determine output architecture. + -model|-arch|-isysroot|--sysroot) + func_append compiler_flags " $arg" + func_append compile_command " $arg" + func_append finalize_command " $arg" + prev=xcompiler + continue + ;; + + -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe \ + |-threads|-fopenmp|-openmp|-mp|-xopenmp|-omp|-qsmp=*) + func_append compiler_flags " $arg" + func_append compile_command " $arg" + func_append finalize_command " $arg" + case "$new_inherited_linker_flags " in + *" $arg "*) ;; + * ) func_append new_inherited_linker_flags " $arg" ;; + esac + continue + ;; + + -multi_module) + single_module="${wl}-multi_module" + continue + ;; + + -no-fast-install) + fast_install=no + continue + ;; + + -no-install) + case $host in + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-darwin* | *-cegcc*) + # The PATH hackery in wrapper scripts is required on Windows + # and Darwin in order for the loader to find any dlls it needs. + func_warning "\`-no-install' is ignored for $host" + func_warning "assuming \`-no-fast-install' instead" + fast_install=no + ;; + *) no_install=yes ;; + esac + continue + ;; + + -no-undefined) + allow_undefined=no + continue + ;; + + -objectlist) + prev=objectlist + continue + ;; + + -o) prev=output ;; + + -precious-files-regex) + prev=precious_regex + continue + ;; + + -release) + prev=release + continue + ;; + + -rpath) + prev=rpath + continue + ;; + + -R) + prev=xrpath + continue + ;; + + -R*) + func_stripname '-R' '' "$arg" + dir=$func_stripname_result + # We need an absolute path. + case $dir in + [\\/]* | [A-Za-z]:[\\/]*) ;; + =*) + func_stripname '=' '' "$dir" + dir=$lt_sysroot$func_stripname_result + ;; + *) + func_fatal_error "only absolute run-paths are allowed" + ;; + esac + case "$xrpath " in + *" $dir "*) ;; + *) func_append xrpath " $dir" ;; + esac + continue + ;; + + -shared) + # The effects of -shared are defined in a previous loop. + continue + ;; + + -shrext) + prev=shrext + continue + ;; + + -static | -static-libtool-libs) + # The effects of -static are defined in a previous loop. + # We used to do the same as -all-static on platforms that + # didn't have a PIC flag, but the assumption that the effects + # would be equivalent was wrong. It would break on at least + # Digital Unix and AIX. + continue + ;; + + -thread-safe) + thread_safe=yes + continue + ;; + + -version-info) + prev=vinfo + continue + ;; + + -version-number) + prev=vinfo + vinfo_number=yes + continue + ;; + + -weak) + prev=weak + continue + ;; + + -Wc,*) + func_stripname '-Wc,' '' "$arg" + args=$func_stripname_result + arg= + save_ifs="$IFS"; IFS=',' + for flag in $args; do + IFS="$save_ifs" + func_quote_for_eval "$flag" + func_append arg " $func_quote_for_eval_result" + func_append compiler_flags " $func_quote_for_eval_result" + done + IFS="$save_ifs" + func_stripname ' ' '' "$arg" + arg=$func_stripname_result + ;; + + -Wl,*) + func_stripname '-Wl,' '' "$arg" + args=$func_stripname_result + arg= + save_ifs="$IFS"; IFS=',' + for flag in $args; do + IFS="$save_ifs" + func_quote_for_eval "$flag" + func_append arg " $wl$func_quote_for_eval_result" + func_append compiler_flags " $wl$func_quote_for_eval_result" + func_append linker_flags " $func_quote_for_eval_result" + done + IFS="$save_ifs" + func_stripname ' ' '' "$arg" + arg=$func_stripname_result + ;; + + -Xcompiler) + prev=xcompiler + continue + ;; + + -Xlinker) + prev=xlinker + continue + ;; + + -XCClinker) + prev=xcclinker + continue + ;; + + # -msg_* for osf cc + -msg_*) + func_quote_for_eval "$arg" + arg="$func_quote_for_eval_result" + ;; + + # Flags to be passed through unchanged, with rationale: + # -64, -mips[0-9] enable 64-bit mode for the SGI compiler + # -r[0-9][0-9]* specify processor for the SGI compiler + # -xarch=*, -xtarget=* enable 64-bit mode for the Sun compiler + # +DA*, +DD* enable 64-bit mode for the HP compiler + # -q* compiler args for the IBM compiler + # -m*, -t[45]*, -txscale* architecture-specific flags for GCC + # -F/path path to uninstalled frameworks, gcc on darwin + # -p, -pg, --coverage, -fprofile-* profiling flags for GCC + # @file GCC response files + # -tp=* Portland pgcc target processor selection + # --sysroot=* for sysroot support + # -O*, -flto*, -fwhopr*, -fuse-linker-plugin GCC link-time optimization + -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*| \ + -t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*|-tp=*|--sysroot=*| \ + -O*|-flto*|-fwhopr*|-fuse-linker-plugin) + func_quote_for_eval "$arg" + arg="$func_quote_for_eval_result" + func_append compile_command " $arg" + func_append finalize_command " $arg" + func_append compiler_flags " $arg" + continue + ;; + + # Some other compiler flag. + -* | +*) + func_quote_for_eval "$arg" + arg="$func_quote_for_eval_result" + ;; + + *.$objext) + # A standard object. + func_append objs " $arg" + ;; + + *.lo) + # A libtool-controlled object. + + # Check to see that this really is a libtool object. + if func_lalib_unsafe_p "$arg"; then + pic_object= + non_pic_object= + + # Read the .lo file + func_source "$arg" + + if test -z "$pic_object" || + test -z "$non_pic_object" || + test "$pic_object" = none && + test "$non_pic_object" = none; then + func_fatal_error "cannot find name of object for \`$arg'" + fi + + # Extract subdirectory from the argument. + func_dirname "$arg" "/" "" + xdir="$func_dirname_result" + + if test "$pic_object" != none; then + # Prepend the subdirectory the object is found in. + pic_object="$xdir$pic_object" + + if test "$prev" = dlfiles; then + if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then + func_append dlfiles " $pic_object" + prev= + continue + else + # If libtool objects are unsupported, then we need to preload. + prev=dlprefiles + fi + fi + + # CHECK ME: I think I busted this. -Ossama + if test "$prev" = dlprefiles; then + # Preload the old-style object. + func_append dlprefiles " $pic_object" + prev= + fi + + # A PIC object. + func_append libobjs " $pic_object" + arg="$pic_object" + fi + + # Non-PIC object. + if test "$non_pic_object" != none; then + # Prepend the subdirectory the object is found in. + non_pic_object="$xdir$non_pic_object" + + # A standard non-PIC object + func_append non_pic_objects " $non_pic_object" + if test -z "$pic_object" || test "$pic_object" = none ; then + arg="$non_pic_object" + fi + else + # If the PIC object exists, use it instead. + # $xdir was prepended to $pic_object above. + non_pic_object="$pic_object" + func_append non_pic_objects " $non_pic_object" + fi + else + # Only an error if not doing a dry-run. + if $opt_dry_run; then + # Extract subdirectory from the argument. + func_dirname "$arg" "/" "" + xdir="$func_dirname_result" + + func_lo2o "$arg" + pic_object=$xdir$objdir/$func_lo2o_result + non_pic_object=$xdir$func_lo2o_result + func_append libobjs " $pic_object" + func_append non_pic_objects " $non_pic_object" + else + func_fatal_error "\`$arg' is not a valid libtool object" + fi + fi + ;; + + *.$libext) + # An archive. + func_append deplibs " $arg" + func_append old_deplibs " $arg" + continue + ;; + + *.la) + # A libtool-controlled library. + + func_resolve_sysroot "$arg" + if test "$prev" = dlfiles; then + # This library was specified with -dlopen. + func_append dlfiles " $func_resolve_sysroot_result" + prev= + elif test "$prev" = dlprefiles; then + # The library was specified with -dlpreopen. + func_append dlprefiles " $func_resolve_sysroot_result" + prev= + else + func_append deplibs " $func_resolve_sysroot_result" + fi + continue + ;; + + # Some other compiler argument. + *) + # Unknown arguments in both finalize_command and compile_command need + # to be aesthetically quoted because they are evaled later. + func_quote_for_eval "$arg" + arg="$func_quote_for_eval_result" + ;; + esac # arg + + # Now actually substitute the argument into the commands. + if test -n "$arg"; then + func_append compile_command " $arg" + func_append finalize_command " $arg" + fi + done # argument parsing loop + + test -n "$prev" && \ + func_fatal_help "the \`$prevarg' option requires an argument" + + if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then + eval arg=\"$export_dynamic_flag_spec\" + func_append compile_command " $arg" + func_append finalize_command " $arg" + fi + + oldlibs= + # calculate the name of the file, without its directory + func_basename "$output" + outputname="$func_basename_result" + libobjs_save="$libobjs" + + if test -n "$shlibpath_var"; then + # get the directories listed in $shlibpath_var + eval shlib_search_path=\`\$ECHO \"\${$shlibpath_var}\" \| \$SED \'s/:/ /g\'\` + else + shlib_search_path= + fi + eval sys_lib_search_path=\"$sys_lib_search_path_spec\" + eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\" + + func_dirname "$output" "/" "" + output_objdir="$func_dirname_result$objdir" + func_to_tool_file "$output_objdir/" + tool_output_objdir=$func_to_tool_file_result + # Create the object directory. + func_mkdir_p "$output_objdir" + + # Determine the type of output + case $output in + "") + func_fatal_help "you must specify an output file" + ;; + *.$libext) linkmode=oldlib ;; + *.lo | *.$objext) linkmode=obj ;; + *.la) linkmode=lib ;; + *) linkmode=prog ;; # Anything else should be a program. + esac + + specialdeplibs= + + libs= + # Find all interdependent deplibs by searching for libraries + # that are linked more than once (e.g. -la -lb -la) + for deplib in $deplibs; do + if $opt_preserve_dup_deps ; then + case "$libs " in + *" $deplib "*) func_append specialdeplibs " $deplib" ;; + esac + fi + func_append libs " $deplib" + done + + if test "$linkmode" = lib; then + libs="$predeps $libs $compiler_lib_search_path $postdeps" + + # Compute libraries that are listed more than once in $predeps + # $postdeps and mark them as special (i.e., whose duplicates are + # not to be eliminated). + pre_post_deps= + if $opt_duplicate_compiler_generated_deps; then + for pre_post_dep in $predeps $postdeps; do + case "$pre_post_deps " in + *" $pre_post_dep "*) func_append specialdeplibs " $pre_post_deps" ;; + esac + func_append pre_post_deps " $pre_post_dep" + done + fi + pre_post_deps= + fi + + deplibs= + newdependency_libs= + newlib_search_path= + need_relink=no # whether we're linking any uninstalled libtool libraries + notinst_deplibs= # not-installed libtool libraries + notinst_path= # paths that contain not-installed libtool libraries + + case $linkmode in + lib) + passes="conv dlpreopen link" + for file in $dlfiles $dlprefiles; do + case $file in + *.la) ;; + *) + func_fatal_help "libraries can \`-dlopen' only libtool libraries: $file" + ;; + esac + done + ;; + prog) + compile_deplibs= + finalize_deplibs= + alldeplibs=no + newdlfiles= + newdlprefiles= + passes="conv scan dlopen dlpreopen link" + ;; + *) passes="conv" + ;; + esac + + for pass in $passes; do + # The preopen pass in lib mode reverses $deplibs; put it back here + # so that -L comes before libs that need it for instance... + if test "$linkmode,$pass" = "lib,link"; then + ## FIXME: Find the place where the list is rebuilt in the wrong + ## order, and fix it there properly + tmp_deplibs= + for deplib in $deplibs; do + tmp_deplibs="$deplib $tmp_deplibs" + done + deplibs="$tmp_deplibs" + fi + + if test "$linkmode,$pass" = "lib,link" || + test "$linkmode,$pass" = "prog,scan"; then + libs="$deplibs" + deplibs= + fi + if test "$linkmode" = prog; then + case $pass in + dlopen) libs="$dlfiles" ;; + dlpreopen) libs="$dlprefiles" ;; + link) libs="$deplibs %DEPLIBS% $dependency_libs" ;; + esac + fi + if test "$linkmode,$pass" = "lib,dlpreopen"; then + # Collect and forward deplibs of preopened libtool libs + for lib in $dlprefiles; do + # Ignore non-libtool-libs + dependency_libs= + func_resolve_sysroot "$lib" + case $lib in + *.la) func_source "$func_resolve_sysroot_result" ;; + esac + + # Collect preopened libtool deplibs, except any this library + # has declared as weak libs + for deplib in $dependency_libs; do + func_basename "$deplib" + deplib_base=$func_basename_result + case " $weak_libs " in + *" $deplib_base "*) ;; + *) func_append deplibs " $deplib" ;; + esac + done + done + libs="$dlprefiles" + fi + if test "$pass" = dlopen; then + # Collect dlpreopened libraries + save_deplibs="$deplibs" + deplibs= + fi + + for deplib in $libs; do + lib= + found=no + case $deplib in + -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe \ + |-threads|-fopenmp|-openmp|-mp|-xopenmp|-omp|-qsmp=*) + if test "$linkmode,$pass" = "prog,link"; then + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + else + func_append compiler_flags " $deplib" + if test "$linkmode" = lib ; then + case "$new_inherited_linker_flags " in + *" $deplib "*) ;; + * ) func_append new_inherited_linker_flags " $deplib" ;; + esac + fi + fi + continue + ;; + -l*) + if test "$linkmode" != lib && test "$linkmode" != prog; then + func_warning "\`-l' is ignored for archives/objects" + continue + fi + func_stripname '-l' '' "$deplib" + name=$func_stripname_result + if test "$linkmode" = lib; then + searchdirs="$newlib_search_path $lib_search_path $compiler_lib_search_dirs $sys_lib_search_path $shlib_search_path" + else + searchdirs="$newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path" + fi + for searchdir in $searchdirs; do + for search_ext in .la $std_shrext .so .a; do + # Search the libtool library + lib="$searchdir/lib${name}${search_ext}" + if test -f "$lib"; then + if test "$search_ext" = ".la"; then + found=yes + else + found=no + fi + break 2 + fi + done + done + if test "$found" != yes; then + # deplib doesn't seem to be a libtool library + if test "$linkmode,$pass" = "prog,link"; then + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + else + deplibs="$deplib $deplibs" + test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs" + fi + continue + else # deplib is a libtool library + # If $allow_libtool_libs_with_static_runtimes && $deplib is a stdlib, + # We need to do some special things here, and not later. + if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then + case " $predeps $postdeps " in + *" $deplib "*) + if func_lalib_p "$lib"; then + library_names= + old_library= + func_source "$lib" + for l in $old_library $library_names; do + ll="$l" + done + if test "X$ll" = "X$old_library" ; then # only static version available + found=no + func_dirname "$lib" "" "." + ladir="$func_dirname_result" + lib=$ladir/$old_library + if test "$linkmode,$pass" = "prog,link"; then + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + else + deplibs="$deplib $deplibs" + test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs" + fi + continue + fi + fi + ;; + *) ;; + esac + fi + fi + ;; # -l + *.ltframework) + if test "$linkmode,$pass" = "prog,link"; then + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + else + deplibs="$deplib $deplibs" + if test "$linkmode" = lib ; then + case "$new_inherited_linker_flags " in + *" $deplib "*) ;; + * ) func_append new_inherited_linker_flags " $deplib" ;; + esac + fi + fi + continue + ;; + -L*) + case $linkmode in + lib) + deplibs="$deplib $deplibs" + test "$pass" = conv && continue + newdependency_libs="$deplib $newdependency_libs" + func_stripname '-L' '' "$deplib" + func_resolve_sysroot "$func_stripname_result" + func_append newlib_search_path " $func_resolve_sysroot_result" + ;; + prog) + if test "$pass" = conv; then + deplibs="$deplib $deplibs" + continue + fi + if test "$pass" = scan; then + deplibs="$deplib $deplibs" + else + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + fi + func_stripname '-L' '' "$deplib" + func_resolve_sysroot "$func_stripname_result" + func_append newlib_search_path " $func_resolve_sysroot_result" + ;; + *) + func_warning "\`-L' is ignored for archives/objects" + ;; + esac # linkmode + continue + ;; # -L + -R*) + if test "$pass" = link; then + func_stripname '-R' '' "$deplib" + func_resolve_sysroot "$func_stripname_result" + dir=$func_resolve_sysroot_result + # Make sure the xrpath contains only unique directories. + case "$xrpath " in + *" $dir "*) ;; + *) func_append xrpath " $dir" ;; + esac + fi + deplibs="$deplib $deplibs" + continue + ;; + *.la) + func_resolve_sysroot "$deplib" + lib=$func_resolve_sysroot_result + ;; + *.$libext) + if test "$pass" = conv; then + deplibs="$deplib $deplibs" + continue + fi + case $linkmode in + lib) + # Linking convenience modules into shared libraries is allowed, + # but linking other static libraries is non-portable. + case " $dlpreconveniencelibs " in + *" $deplib "*) ;; + *) + valid_a_lib=no + case $deplibs_check_method in + match_pattern*) + set dummy $deplibs_check_method; shift + match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"` + if eval "\$ECHO \"$deplib\"" 2>/dev/null | $SED 10q \ + | $EGREP "$match_pattern_regex" > /dev/null; then + valid_a_lib=yes + fi + ;; + pass_all) + valid_a_lib=yes + ;; + esac + if test "$valid_a_lib" != yes; then + echo + $ECHO "*** Warning: Trying to link with static lib archive $deplib." + echo "*** I have the capability to make that library automatically link in when" + echo "*** you link to this library. But I can only do this if you have a" + echo "*** shared version of the library, which you do not appear to have" + echo "*** because the file extensions .$libext of this argument makes me believe" + echo "*** that it is just a static archive that I should not use here." + else + echo + $ECHO "*** Warning: Linking the shared library $output against the" + $ECHO "*** static library $deplib is not portable!" + deplibs="$deplib $deplibs" + fi + ;; + esac + continue + ;; + prog) + if test "$pass" != link; then + deplibs="$deplib $deplibs" + else + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + fi + continue + ;; + esac # linkmode + ;; # *.$libext + *.lo | *.$objext) + if test "$pass" = conv; then + deplibs="$deplib $deplibs" + elif test "$linkmode" = prog; then + if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then + # If there is no dlopen support or we're linking statically, + # we need to preload. + func_append newdlprefiles " $deplib" + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + else + func_append newdlfiles " $deplib" + fi + fi + continue + ;; + %DEPLIBS%) + alldeplibs=yes + continue + ;; + esac # case $deplib + + if test "$found" = yes || test -f "$lib"; then : + else + func_fatal_error "cannot find the library \`$lib' or unhandled argument \`$deplib'" + fi + + # Check to see that this really is a libtool archive. + func_lalib_unsafe_p "$lib" \ + || func_fatal_error "\`$lib' is not a valid libtool archive" + + func_dirname "$lib" "" "." + ladir="$func_dirname_result" + + dlname= + dlopen= + dlpreopen= + libdir= + library_names= + old_library= + inherited_linker_flags= + # If the library was installed with an old release of libtool, + # it will not redefine variables installed, or shouldnotlink + installed=yes + shouldnotlink=no + avoidtemprpath= + + + # Read the .la file + func_source "$lib" + + # Convert "-framework foo" to "foo.ltframework" + if test -n "$inherited_linker_flags"; then + tmp_inherited_linker_flags=`$ECHO "$inherited_linker_flags" | $SED 's/-framework \([^ $]*\)/\1.ltframework/g'` + for tmp_inherited_linker_flag in $tmp_inherited_linker_flags; do + case " $new_inherited_linker_flags " in + *" $tmp_inherited_linker_flag "*) ;; + *) func_append new_inherited_linker_flags " $tmp_inherited_linker_flag";; + esac + done + fi + dependency_libs=`$ECHO " $dependency_libs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` + if test "$linkmode,$pass" = "lib,link" || + test "$linkmode,$pass" = "prog,scan" || + { test "$linkmode" != prog && test "$linkmode" != lib; }; then + test -n "$dlopen" && func_append dlfiles " $dlopen" + test -n "$dlpreopen" && func_append dlprefiles " $dlpreopen" + fi + + if test "$pass" = conv; then + # Only check for convenience libraries + deplibs="$lib $deplibs" + if test -z "$libdir"; then + if test -z "$old_library"; then + func_fatal_error "cannot find name of link library for \`$lib'" + fi + # It is a libtool convenience library, so add in its objects. + func_append convenience " $ladir/$objdir/$old_library" + func_append old_convenience " $ladir/$objdir/$old_library" + elif test "$linkmode" != prog && test "$linkmode" != lib; then + func_fatal_error "\`$lib' is not a convenience library" + fi + tmp_libs= + for deplib in $dependency_libs; do + deplibs="$deplib $deplibs" + if $opt_preserve_dup_deps ; then + case "$tmp_libs " in + *" $deplib "*) func_append specialdeplibs " $deplib" ;; + esac + fi + func_append tmp_libs " $deplib" + done + continue + fi # $pass = conv + + + # Get the name of the library we link against. + linklib= + if test -n "$old_library" && + { test "$prefer_static_libs" = yes || + test "$prefer_static_libs,$installed" = "built,no"; }; then + linklib=$old_library + else + for l in $old_library $library_names; do + linklib="$l" + done + fi + if test -z "$linklib"; then + func_fatal_error "cannot find name of link library for \`$lib'" + fi + + # This library was specified with -dlopen. + if test "$pass" = dlopen; then + if test -z "$libdir"; then + func_fatal_error "cannot -dlopen a convenience library: \`$lib'" + fi + if test -z "$dlname" || + test "$dlopen_support" != yes || + test "$build_libtool_libs" = no; then + # If there is no dlname, no dlopen support or we're linking + # statically, we need to preload. We also need to preload any + # dependent libraries so libltdl's deplib preloader doesn't + # bomb out in the load deplibs phase. + func_append dlprefiles " $lib $dependency_libs" + else + func_append newdlfiles " $lib" + fi + continue + fi # $pass = dlopen + + # We need an absolute path. + case $ladir in + [\\/]* | [A-Za-z]:[\\/]*) abs_ladir="$ladir" ;; + *) + abs_ladir=`cd "$ladir" && pwd` + if test -z "$abs_ladir"; then + func_warning "cannot determine absolute directory name of \`$ladir'" + func_warning "passing it literally to the linker, although it might fail" + abs_ladir="$ladir" + fi + ;; + esac + func_basename "$lib" + laname="$func_basename_result" + + # Find the relevant object directory and library name. + if test "X$installed" = Xyes; then + if test ! -f "$lt_sysroot$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then + #func_warning "library \`$lib' was moved." + dir="$ladir" + absdir="$abs_ladir" + libdir="$abs_ladir" + else + dir="$lt_sysroot$libdir" + absdir="$lt_sysroot$libdir" + fi + test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes + else + if test ! -f "$ladir/$objdir/$linklib" && test -f "$abs_ladir/$linklib"; then + dir="$ladir" + absdir="$abs_ladir" + # Remove this search path later + func_append notinst_path " $abs_ladir" + else + dir="$ladir/$objdir" + absdir="$abs_ladir/$objdir" + # Remove this search path later + func_append notinst_path " $abs_ladir" + fi + fi # $installed = yes + func_stripname 'lib' '.la' "$laname" + name=$func_stripname_result + + # This library was specified with -dlpreopen. + if test "$pass" = dlpreopen; then + if test -z "$libdir" && test "$linkmode" = prog; then + func_fatal_error "only libraries may -dlpreopen a convenience library: \`$lib'" + fi + case "$host" in + # special handling for platforms with PE-DLLs. + *cygwin* | *mingw* | *cegcc* ) + # Linker will automatically link against shared library if both + # static and shared are present. Therefore, ensure we extract + # symbols from the import library if a shared library is present + # (otherwise, the dlopen module name will be incorrect). We do + # this by putting the import library name into $newdlprefiles. + # We recover the dlopen module name by 'saving' the la file + # name in a special purpose variable, and (later) extracting the + # dlname from the la file. + if test -n "$dlname"; then + func_tr_sh "$dir/$linklib" + eval "libfile_$func_tr_sh_result=\$abs_ladir/\$laname" + func_append newdlprefiles " $dir/$linklib" + else + func_append newdlprefiles " $dir/$old_library" + # Keep a list of preopened convenience libraries to check + # that they are being used correctly in the link pass. + test -z "$libdir" && \ + func_append dlpreconveniencelibs " $dir/$old_library" + fi + ;; + * ) + # Prefer using a static library (so that no silly _DYNAMIC symbols + # are required to link). + if test -n "$old_library"; then + func_append newdlprefiles " $dir/$old_library" + # Keep a list of preopened convenience libraries to check + # that they are being used correctly in the link pass. + test -z "$libdir" && \ + func_append dlpreconveniencelibs " $dir/$old_library" + # Otherwise, use the dlname, so that lt_dlopen finds it. + elif test -n "$dlname"; then + func_append newdlprefiles " $dir/$dlname" + else + func_append newdlprefiles " $dir/$linklib" + fi + ;; + esac + fi # $pass = dlpreopen + + if test -z "$libdir"; then + # Link the convenience library + if test "$linkmode" = lib; then + deplibs="$dir/$old_library $deplibs" + elif test "$linkmode,$pass" = "prog,link"; then + compile_deplibs="$dir/$old_library $compile_deplibs" + finalize_deplibs="$dir/$old_library $finalize_deplibs" + else + deplibs="$lib $deplibs" # used for prog,scan pass + fi + continue + fi + + + if test "$linkmode" = prog && test "$pass" != link; then + func_append newlib_search_path " $ladir" + deplibs="$lib $deplibs" + + linkalldeplibs=no + if test "$link_all_deplibs" != no || test -z "$library_names" || + test "$build_libtool_libs" = no; then + linkalldeplibs=yes + fi + + tmp_libs= + for deplib in $dependency_libs; do + case $deplib in + -L*) func_stripname '-L' '' "$deplib" + func_resolve_sysroot "$func_stripname_result" + func_append newlib_search_path " $func_resolve_sysroot_result" + ;; + esac + # Need to link against all dependency_libs? + if test "$linkalldeplibs" = yes; then + deplibs="$deplib $deplibs" + else + # Need to hardcode shared library paths + # or/and link against static libraries + newdependency_libs="$deplib $newdependency_libs" + fi + if $opt_preserve_dup_deps ; then + case "$tmp_libs " in + *" $deplib "*) func_append specialdeplibs " $deplib" ;; + esac + fi + func_append tmp_libs " $deplib" + done # for deplib + continue + fi # $linkmode = prog... + + if test "$linkmode,$pass" = "prog,link"; then + if test -n "$library_names" && + { { test "$prefer_static_libs" = no || + test "$prefer_static_libs,$installed" = "built,yes"; } || + test -z "$old_library"; }; then + # We need to hardcode the library path + if test -n "$shlibpath_var" && test -z "$avoidtemprpath" ; then + # Make sure the rpath contains only unique directories. + case "$temp_rpath:" in + *"$absdir:"*) ;; + *) func_append temp_rpath "$absdir:" ;; + esac + fi + + # Hardcode the library path. + # Skip directories that are in the system default run-time + # search path. + case " $sys_lib_dlsearch_path " in + *" $absdir "*) ;; + *) + case "$compile_rpath " in + *" $absdir "*) ;; + *) func_append compile_rpath " $absdir" ;; + esac + ;; + esac + case " $sys_lib_dlsearch_path " in + *" $libdir "*) ;; + *) + case "$finalize_rpath " in + *" $libdir "*) ;; + *) func_append finalize_rpath " $libdir" ;; + esac + ;; + esac + fi # $linkmode,$pass = prog,link... + + if test "$alldeplibs" = yes && + { test "$deplibs_check_method" = pass_all || + { test "$build_libtool_libs" = yes && + test -n "$library_names"; }; }; then + # We only need to search for static libraries + continue + fi + fi + + link_static=no # Whether the deplib will be linked statically + use_static_libs=$prefer_static_libs + if test "$use_static_libs" = built && test "$installed" = yes; then + use_static_libs=no + fi + if test -n "$library_names" && + { test "$use_static_libs" = no || test -z "$old_library"; }; then + case $host in + *cygwin* | *mingw* | *cegcc*) + # No point in relinking DLLs because paths are not encoded + func_append notinst_deplibs " $lib" + need_relink=no + ;; + *) + if test "$installed" = no; then + func_append notinst_deplibs " $lib" + need_relink=yes + fi + ;; + esac + # This is a shared library + + # Warn about portability, can't link against -module's on some + # systems (darwin). Don't bleat about dlopened modules though! + dlopenmodule="" + for dlpremoduletest in $dlprefiles; do + if test "X$dlpremoduletest" = "X$lib"; then + dlopenmodule="$dlpremoduletest" + break + fi + done + if test -z "$dlopenmodule" && test "$shouldnotlink" = yes && test "$pass" = link; then + echo + if test "$linkmode" = prog; then + $ECHO "*** Warning: Linking the executable $output against the loadable module" + else + $ECHO "*** Warning: Linking the shared library $output against the loadable module" + fi + $ECHO "*** $linklib is not portable!" + fi + if test "$linkmode" = lib && + test "$hardcode_into_libs" = yes; then + # Hardcode the library path. + # Skip directories that are in the system default run-time + # search path. + case " $sys_lib_dlsearch_path " in + *" $absdir "*) ;; + *) + case "$compile_rpath " in + *" $absdir "*) ;; + *) func_append compile_rpath " $absdir" ;; + esac + ;; + esac + case " $sys_lib_dlsearch_path " in + *" $libdir "*) ;; + *) + case "$finalize_rpath " in + *" $libdir "*) ;; + *) func_append finalize_rpath " $libdir" ;; + esac + ;; + esac + fi + + if test -n "$old_archive_from_expsyms_cmds"; then + # figure out the soname + set dummy $library_names + shift + realname="$1" + shift + libname=`eval "\\$ECHO \"$libname_spec\""` + # use dlname if we got it. it's perfectly good, no? + if test -n "$dlname"; then + soname="$dlname" + elif test -n "$soname_spec"; then + # bleh windows + case $host in + *cygwin* | mingw* | *cegcc*) + func_arith $current - $age + major=$func_arith_result + versuffix="-$major" + ;; + esac + eval soname=\"$soname_spec\" + else + soname="$realname" + fi + + # Make a new name for the extract_expsyms_cmds to use + soroot="$soname" + func_basename "$soroot" + soname="$func_basename_result" + func_stripname 'lib' '.dll' "$soname" + newlib=libimp-$func_stripname_result.a + + # If the library has no export list, then create one now + if test -f "$output_objdir/$soname-def"; then : + else + func_verbose "extracting exported symbol list from \`$soname'" + func_execute_cmds "$extract_expsyms_cmds" 'exit $?' + fi + + # Create $newlib + if test -f "$output_objdir/$newlib"; then :; else + func_verbose "generating import library for \`$soname'" + func_execute_cmds "$old_archive_from_expsyms_cmds" 'exit $?' + fi + # make sure the library variables are pointing to the new library + dir=$output_objdir + linklib=$newlib + fi # test -n "$old_archive_from_expsyms_cmds" + + if test "$linkmode" = prog || test "$opt_mode" != relink; then + add_shlibpath= + add_dir= + add= + lib_linked=yes + case $hardcode_action in + immediate | unsupported) + if test "$hardcode_direct" = no; then + add="$dir/$linklib" + case $host in + *-*-sco3.2v5.0.[024]*) add_dir="-L$dir" ;; + *-*-sysv4*uw2*) add_dir="-L$dir" ;; + *-*-sysv5OpenUNIX* | *-*-sysv5UnixWare7.[01].[10]* | \ + *-*-unixware7*) add_dir="-L$dir" ;; + *-*-darwin* ) + # if the lib is a (non-dlopened) module then we can not + # link against it, someone is ignoring the earlier warnings + if /usr/bin/file -L $add 2> /dev/null | + $GREP ": [^:]* bundle" >/dev/null ; then + if test "X$dlopenmodule" != "X$lib"; then + $ECHO "*** Warning: lib $linklib is a module, not a shared library" + if test -z "$old_library" ; then + echo + echo "*** And there doesn't seem to be a static archive available" + echo "*** The link will probably fail, sorry" + else + add="$dir/$old_library" + fi + elif test -n "$old_library"; then + add="$dir/$old_library" + fi + fi + esac + elif test "$hardcode_minus_L" = no; then + case $host in + *-*-sunos*) add_shlibpath="$dir" ;; + esac + add_dir="-L$dir" + add="-l$name" + elif test "$hardcode_shlibpath_var" = no; then + add_shlibpath="$dir" + add="-l$name" + else + lib_linked=no + fi + ;; + relink) + if test "$hardcode_direct" = yes && + test "$hardcode_direct_absolute" = no; then + add="$dir/$linklib" + elif test "$hardcode_minus_L" = yes; then + add_dir="-L$absdir" + # Try looking first in the location we're being installed to. + if test -n "$inst_prefix_dir"; then + case $libdir in + [\\/]*) + func_append add_dir " -L$inst_prefix_dir$libdir" + ;; + esac + fi + add="-l$name" + elif test "$hardcode_shlibpath_var" = yes; then + add_shlibpath="$dir" + add="-l$name" + else + lib_linked=no + fi + ;; + *) lib_linked=no ;; + esac + + if test "$lib_linked" != yes; then + func_fatal_configuration "unsupported hardcode properties" + fi + + if test -n "$add_shlibpath"; then + case :$compile_shlibpath: in + *":$add_shlibpath:"*) ;; + *) func_append compile_shlibpath "$add_shlibpath:" ;; + esac + fi + if test "$linkmode" = prog; then + test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs" + test -n "$add" && compile_deplibs="$add $compile_deplibs" + else + test -n "$add_dir" && deplibs="$add_dir $deplibs" + test -n "$add" && deplibs="$add $deplibs" + if test "$hardcode_direct" != yes && + test "$hardcode_minus_L" != yes && + test "$hardcode_shlibpath_var" = yes; then + case :$finalize_shlibpath: in + *":$libdir:"*) ;; + *) func_append finalize_shlibpath "$libdir:" ;; + esac + fi + fi + fi + + if test "$linkmode" = prog || test "$opt_mode" = relink; then + add_shlibpath= + add_dir= + add= + # Finalize command for both is simple: just hardcode it. + if test "$hardcode_direct" = yes && + test "$hardcode_direct_absolute" = no; then + add="$libdir/$linklib" + elif test "$hardcode_minus_L" = yes; then + add_dir="-L$libdir" + add="-l$name" + elif test "$hardcode_shlibpath_var" = yes; then + case :$finalize_shlibpath: in + *":$libdir:"*) ;; + *) func_append finalize_shlibpath "$libdir:" ;; + esac + add="-l$name" + elif test "$hardcode_automatic" = yes; then + if test -n "$inst_prefix_dir" && + test -f "$inst_prefix_dir$libdir/$linklib" ; then + add="$inst_prefix_dir$libdir/$linklib" + else + add="$libdir/$linklib" + fi + else + # We cannot seem to hardcode it, guess we'll fake it. + add_dir="-L$libdir" + # Try looking first in the location we're being installed to. + if test -n "$inst_prefix_dir"; then + case $libdir in + [\\/]*) + func_append add_dir " -L$inst_prefix_dir$libdir" + ;; + esac + fi + add="-l$name" + fi + + if test "$linkmode" = prog; then + test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs" + test -n "$add" && finalize_deplibs="$add $finalize_deplibs" + else + test -n "$add_dir" && deplibs="$add_dir $deplibs" + test -n "$add" && deplibs="$add $deplibs" + fi + fi + elif test "$linkmode" = prog; then + # Here we assume that one of hardcode_direct or hardcode_minus_L + # is not unsupported. This is valid on all known static and + # shared platforms. + if test "$hardcode_direct" != unsupported; then + test -n "$old_library" && linklib="$old_library" + compile_deplibs="$dir/$linklib $compile_deplibs" + finalize_deplibs="$dir/$linklib $finalize_deplibs" + else + compile_deplibs="-l$name -L$dir $compile_deplibs" + finalize_deplibs="-l$name -L$dir $finalize_deplibs" + fi + elif test "$build_libtool_libs" = yes; then + # Not a shared library + if test "$deplibs_check_method" != pass_all; then + # We're trying link a shared library against a static one + # but the system doesn't support it. + + # Just print a warning and add the library to dependency_libs so + # that the program can be linked against the static library. + echo + $ECHO "*** Warning: This system can not link to static lib archive $lib." + echo "*** I have the capability to make that library automatically link in when" + echo "*** you link to this library. But I can only do this if you have a" + echo "*** shared version of the library, which you do not appear to have." + if test "$module" = yes; then + echo "*** But as you try to build a module library, libtool will still create " + echo "*** a static module, that should work as long as the dlopening application" + echo "*** is linked with the -dlopen flag to resolve symbols at runtime." + if test -z "$global_symbol_pipe"; then + echo + echo "*** However, this would only work if libtool was able to extract symbol" + echo "*** lists from a program, using \`nm' or equivalent, but libtool could" + echo "*** not find such a program. So, this module is probably useless." + echo "*** \`nm' from GNU binutils and a full rebuild may help." + fi + if test "$build_old_libs" = no; then + build_libtool_libs=module + build_old_libs=yes + else + build_libtool_libs=no + fi + fi + else + deplibs="$dir/$old_library $deplibs" + link_static=yes + fi + fi # link shared/static library? + + if test "$linkmode" = lib; then + if test -n "$dependency_libs" && + { test "$hardcode_into_libs" != yes || + test "$build_old_libs" = yes || + test "$link_static" = yes; }; then + # Extract -R from dependency_libs + temp_deplibs= + for libdir in $dependency_libs; do + case $libdir in + -R*) func_stripname '-R' '' "$libdir" + temp_xrpath=$func_stripname_result + case " $xrpath " in + *" $temp_xrpath "*) ;; + *) func_append xrpath " $temp_xrpath";; + esac;; + *) func_append temp_deplibs " $libdir";; + esac + done + dependency_libs="$temp_deplibs" + fi + + func_append newlib_search_path " $absdir" + # Link against this library + test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs" + # ... and its dependency_libs + tmp_libs= + for deplib in $dependency_libs; do + newdependency_libs="$deplib $newdependency_libs" + case $deplib in + -L*) func_stripname '-L' '' "$deplib" + func_resolve_sysroot "$func_stripname_result";; + *) func_resolve_sysroot "$deplib" ;; + esac + if $opt_preserve_dup_deps ; then + case "$tmp_libs " in + *" $func_resolve_sysroot_result "*) + func_append specialdeplibs " $func_resolve_sysroot_result" ;; + esac + fi + func_append tmp_libs " $func_resolve_sysroot_result" + done + + if test "$link_all_deplibs" != no; then + # Add the search paths of all dependency libraries + for deplib in $dependency_libs; do + path= + case $deplib in + -L*) path="$deplib" ;; + *.la) + func_resolve_sysroot "$deplib" + deplib=$func_resolve_sysroot_result + func_dirname "$deplib" "" "." + dir=$func_dirname_result + # We need an absolute path. + case $dir in + [\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;; + *) + absdir=`cd "$dir" && pwd` + if test -z "$absdir"; then + func_warning "cannot determine absolute directory name of \`$dir'" + absdir="$dir" + fi + ;; + esac + if $GREP "^installed=no" $deplib > /dev/null; then + case $host in + *-*-darwin*) + depdepl= + eval deplibrary_names=`${SED} -n -e 's/^library_names=\(.*\)$/\1/p' $deplib` + if test -n "$deplibrary_names" ; then + for tmp in $deplibrary_names ; do + depdepl=$tmp + done + if test -f "$absdir/$objdir/$depdepl" ; then + depdepl="$absdir/$objdir/$depdepl" + darwin_install_name=`${OTOOL} -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'` + if test -z "$darwin_install_name"; then + darwin_install_name=`${OTOOL64} -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'` + fi + func_append compiler_flags " ${wl}-dylib_file ${wl}${darwin_install_name}:${depdepl}" + func_append linker_flags " -dylib_file ${darwin_install_name}:${depdepl}" + path= + fi + fi + ;; + *) + path="-L$absdir/$objdir" + ;; + esac + else + eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib` + test -z "$libdir" && \ + func_fatal_error "\`$deplib' is not a valid libtool archive" + #test "$absdir" != "$libdir" && \ + # func_warning "\`$deplib' seems to be moved" + + path="-L$absdir" + fi + ;; + esac + case " $deplibs " in + *" $path "*) ;; + *) deplibs="$path $deplibs" ;; + esac + done + fi # link_all_deplibs != no + fi # linkmode = lib + done # for deplib in $libs + if test "$pass" = link; then + if test "$linkmode" = "prog"; then + compile_deplibs="$new_inherited_linker_flags $compile_deplibs" + finalize_deplibs="$new_inherited_linker_flags $finalize_deplibs" + else + compiler_flags="$compiler_flags "`$ECHO " $new_inherited_linker_flags" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` + fi + fi + dependency_libs="$newdependency_libs" + if test "$pass" = dlpreopen; then + # Link the dlpreopened libraries before other libraries + for deplib in $save_deplibs; do + deplibs="$deplib $deplibs" + done + fi + if test "$pass" != dlopen; then + if test "$pass" != conv; then + # Make sure lib_search_path contains only unique directories. + lib_search_path= + for dir in $newlib_search_path; do + case "$lib_search_path " in + *" $dir "*) ;; + *) func_append lib_search_path " $dir" ;; + esac + done + newlib_search_path= + fi + + if test "$linkmode,$pass" != "prog,link"; then + vars="deplibs" + else + vars="compile_deplibs finalize_deplibs" + fi + for var in $vars dependency_libs; do + # Add libraries to $var in reverse order + eval tmp_libs=\"\$$var\" + new_libs= + for deplib in $tmp_libs; do + # FIXME: Pedantically, this is the right thing to do, so + # that some nasty dependency loop isn't accidentally + # broken: + #new_libs="$deplib $new_libs" + # Pragmatically, this seems to cause very few problems in + # practice: + case $deplib in + -L*) new_libs="$deplib $new_libs" ;; + -R*) ;; + *) + # And here is the reason: when a library appears more + # than once as an explicit dependence of a library, or + # is implicitly linked in more than once by the + # compiler, it is considered special, and multiple + # occurrences thereof are not removed. Compare this + # with having the same library being listed as a + # dependency of multiple other libraries: in this case, + # we know (pedantically, we assume) the library does not + # need to be listed more than once, so we keep only the + # last copy. This is not always right, but it is rare + # enough that we require users that really mean to play + # such unportable linking tricks to link the library + # using -Wl,-lname, so that libtool does not consider it + # for duplicate removal. + case " $specialdeplibs " in + *" $deplib "*) new_libs="$deplib $new_libs" ;; + *) + case " $new_libs " in + *" $deplib "*) ;; + *) new_libs="$deplib $new_libs" ;; + esac + ;; + esac + ;; + esac + done + tmp_libs= + for deplib in $new_libs; do + case $deplib in + -L*) + case " $tmp_libs " in + *" $deplib "*) ;; + *) func_append tmp_libs " $deplib" ;; + esac + ;; + *) func_append tmp_libs " $deplib" ;; + esac + done + eval $var=\"$tmp_libs\" + done # for var + fi + # Last step: remove runtime libs from dependency_libs + # (they stay in deplibs) + tmp_libs= + for i in $dependency_libs ; do + case " $predeps $postdeps $compiler_lib_search_path " in + *" $i "*) + i="" + ;; + esac + if test -n "$i" ; then + func_append tmp_libs " $i" + fi + done + dependency_libs=$tmp_libs + done # for pass + if test "$linkmode" = prog; then + dlfiles="$newdlfiles" + fi + if test "$linkmode" = prog || test "$linkmode" = lib; then + dlprefiles="$newdlprefiles" + fi + + case $linkmode in + oldlib) + if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then + func_warning "\`-dlopen' is ignored for archives" + fi + + case " $deplibs" in + *\ -l* | *\ -L*) + func_warning "\`-l' and \`-L' are ignored for archives" ;; + esac + + test -n "$rpath" && \ + func_warning "\`-rpath' is ignored for archives" + + test -n "$xrpath" && \ + func_warning "\`-R' is ignored for archives" + + test -n "$vinfo" && \ + func_warning "\`-version-info/-version-number' is ignored for archives" + + test -n "$release" && \ + func_warning "\`-release' is ignored for archives" + + test -n "$export_symbols$export_symbols_regex" && \ + func_warning "\`-export-symbols' is ignored for archives" + + # Now set the variables for building old libraries. + build_libtool_libs=no + oldlibs="$output" + func_append objs "$old_deplibs" + ;; + + lib) + # Make sure we only generate libraries of the form `libNAME.la'. + case $outputname in + lib*) + func_stripname 'lib' '.la' "$outputname" + name=$func_stripname_result + eval shared_ext=\"$shrext_cmds\" + eval libname=\"$libname_spec\" + ;; + *) + test "$module" = no && \ + func_fatal_help "libtool library \`$output' must begin with \`lib'" + + if test "$need_lib_prefix" != no; then + # Add the "lib" prefix for modules if required + func_stripname '' '.la' "$outputname" + name=$func_stripname_result + eval shared_ext=\"$shrext_cmds\" + eval libname=\"$libname_spec\" + else + func_stripname '' '.la' "$outputname" + libname=$func_stripname_result + fi + ;; + esac + + if test -n "$objs"; then + if test "$deplibs_check_method" != pass_all; then + func_fatal_error "cannot build libtool library \`$output' from non-libtool objects on this host:$objs" + else + echo + $ECHO "*** Warning: Linking the shared library $output against the non-libtool" + $ECHO "*** objects $objs is not portable!" + func_append libobjs " $objs" + fi + fi + + test "$dlself" != no && \ + func_warning "\`-dlopen self' is ignored for libtool libraries" + + set dummy $rpath + shift + test "$#" -gt 1 && \ + func_warning "ignoring multiple \`-rpath's for a libtool library" + + install_libdir="$1" + + oldlibs= + if test -z "$rpath"; then + if test "$build_libtool_libs" = yes; then + # Building a libtool convenience library. + # Some compilers have problems with a `.al' extension so + # convenience libraries should have the same extension an + # archive normally would. + oldlibs="$output_objdir/$libname.$libext $oldlibs" + build_libtool_libs=convenience + build_old_libs=yes + fi + + test -n "$vinfo" && \ + func_warning "\`-version-info/-version-number' is ignored for convenience libraries" + + test -n "$release" && \ + func_warning "\`-release' is ignored for convenience libraries" + else + + # Parse the version information argument. + save_ifs="$IFS"; IFS=':' + set dummy $vinfo 0 0 0 + shift + IFS="$save_ifs" + + test -n "$7" && \ + func_fatal_help "too many parameters to \`-version-info'" + + # convert absolute version numbers to libtool ages + # this retains compatibility with .la files and attempts + # to make the code below a bit more comprehensible + + case $vinfo_number in + yes) + number_major="$1" + number_minor="$2" + number_revision="$3" + # + # There are really only two kinds -- those that + # use the current revision as the major version + # and those that subtract age and use age as + # a minor version. But, then there is irix + # which has an extra 1 added just for fun + # + case $version_type in + # correct linux to gnu/linux during the next big refactor + darwin|linux|osf|windows|none) + func_arith $number_major + $number_minor + current=$func_arith_result + age="$number_minor" + revision="$number_revision" + ;; + freebsd-aout|freebsd-elf|qnx|sunos) + current="$number_major" + revision="$number_minor" + age="0" + ;; + irix|nonstopux) + func_arith $number_major + $number_minor + current=$func_arith_result + age="$number_minor" + revision="$number_minor" + lt_irix_increment=no + ;; + esac + ;; + no) + current="$1" + revision="$2" + age="$3" + ;; + esac + + # Check that each of the things are valid numbers. + case $current in + 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; + *) + func_error "CURRENT \`$current' must be a nonnegative integer" + func_fatal_error "\`$vinfo' is not valid version information" + ;; + esac + + case $revision in + 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; + *) + func_error "REVISION \`$revision' must be a nonnegative integer" + func_fatal_error "\`$vinfo' is not valid version information" + ;; + esac + + case $age in + 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; + *) + func_error "AGE \`$age' must be a nonnegative integer" + func_fatal_error "\`$vinfo' is not valid version information" + ;; + esac + + if test "$age" -gt "$current"; then + func_error "AGE \`$age' is greater than the current interface number \`$current'" + func_fatal_error "\`$vinfo' is not valid version information" + fi + + # Calculate the version variables. + major= + versuffix= + verstring= + case $version_type in + none) ;; + + darwin) + # Like Linux, but with the current version available in + # verstring for coding it into the library header + func_arith $current - $age + major=.$func_arith_result + versuffix="$major.$age.$revision" + # Darwin ld doesn't like 0 for these options... + func_arith $current + 1 + minor_current=$func_arith_result + xlcverstring="${wl}-compatibility_version ${wl}$minor_current ${wl}-current_version ${wl}$minor_current.$revision" + verstring="-compatibility_version $minor_current -current_version $minor_current.$revision" + ;; + + freebsd-aout) + major=".$current" + versuffix=".$current.$revision"; + ;; + + freebsd-elf) + major=".$current" + versuffix=".$current" + ;; + + irix | nonstopux) + if test "X$lt_irix_increment" = "Xno"; then + func_arith $current - $age + else + func_arith $current - $age + 1 + fi + major=$func_arith_result + + case $version_type in + nonstopux) verstring_prefix=nonstopux ;; + *) verstring_prefix=sgi ;; + esac + verstring="$verstring_prefix$major.$revision" + + # Add in all the interfaces that we are compatible with. + loop=$revision + while test "$loop" -ne 0; do + func_arith $revision - $loop + iface=$func_arith_result + func_arith $loop - 1 + loop=$func_arith_result + verstring="$verstring_prefix$major.$iface:$verstring" + done + + # Before this point, $major must not contain `.'. + major=.$major + versuffix="$major.$revision" + ;; + + linux) # correct to gnu/linux during the next big refactor + func_arith $current - $age + major=.$func_arith_result + versuffix="$major.$age.$revision" + ;; + + osf) + func_arith $current - $age + major=.$func_arith_result + versuffix=".$current.$age.$revision" + verstring="$current.$age.$revision" + + # Add in all the interfaces that we are compatible with. + loop=$age + while test "$loop" -ne 0; do + func_arith $current - $loop + iface=$func_arith_result + func_arith $loop - 1 + loop=$func_arith_result + verstring="$verstring:${iface}.0" + done + + # Make executables depend on our current version. + func_append verstring ":${current}.0" + ;; + + qnx) + major=".$current" + versuffix=".$current" + ;; + + sunos) + major=".$current" + versuffix=".$current.$revision" + ;; + + windows) + # Use '-' rather than '.', since we only want one + # extension on DOS 8.3 filesystems. + func_arith $current - $age + major=$func_arith_result + versuffix="-$major" + ;; + + *) + func_fatal_configuration "unknown library version type \`$version_type'" + ;; + esac + + # Clear the version info if we defaulted, and they specified a release. + if test -z "$vinfo" && test -n "$release"; then + major= + case $version_type in + darwin) + # we can't check for "0.0" in archive_cmds due to quoting + # problems, so we reset it completely + verstring= + ;; + *) + verstring="0.0" + ;; + esac + if test "$need_version" = no; then + versuffix= + else + versuffix=".0.0" + fi + fi + + # Remove version info from name if versioning should be avoided + if test "$avoid_version" = yes && test "$need_version" = no; then + major= + versuffix= + verstring="" + fi + + # Check to see if the archive will have undefined symbols. + if test "$allow_undefined" = yes; then + if test "$allow_undefined_flag" = unsupported; then + func_warning "undefined symbols not allowed in $host shared libraries" + build_libtool_libs=no + build_old_libs=yes + fi + else + # Don't allow undefined symbols. + allow_undefined_flag="$no_undefined_flag" + fi + + fi + + func_generate_dlsyms "$libname" "$libname" "yes" + func_append libobjs " $symfileobj" + test "X$libobjs" = "X " && libobjs= + + if test "$opt_mode" != relink; then + # Remove our outputs, but don't remove object files since they + # may have been created when compiling PIC objects. + removelist= + tempremovelist=`$ECHO "$output_objdir/*"` + for p in $tempremovelist; do + case $p in + *.$objext | *.gcno) + ;; + $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/${libname}${release}.*) + if test "X$precious_files_regex" != "X"; then + if $ECHO "$p" | $EGREP -e "$precious_files_regex" >/dev/null 2>&1 + then + continue + fi + fi + func_append removelist " $p" + ;; + *) ;; + esac + done + test -n "$removelist" && \ + func_show_eval "${RM}r \$removelist" + fi + + # Now set the variables for building old libraries. + if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then + func_append oldlibs " $output_objdir/$libname.$libext" + + # Transform .lo files to .o files. + oldobjs="$objs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.${libext}$/d; $lo2o" | $NL2SP` + fi + + # Eliminate all temporary directories. + #for path in $notinst_path; do + # lib_search_path=`$ECHO "$lib_search_path " | $SED "s% $path % %g"` + # deplibs=`$ECHO "$deplibs " | $SED "s% -L$path % %g"` + # dependency_libs=`$ECHO "$dependency_libs " | $SED "s% -L$path % %g"` + #done + + if test -n "$xrpath"; then + # If the user specified any rpath flags, then add them. + temp_xrpath= + for libdir in $xrpath; do + func_replace_sysroot "$libdir" + func_append temp_xrpath " -R$func_replace_sysroot_result" + case "$finalize_rpath " in + *" $libdir "*) ;; + *) func_append finalize_rpath " $libdir" ;; + esac + done + if test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes; then + dependency_libs="$temp_xrpath $dependency_libs" + fi + fi + + # Make sure dlfiles contains only unique files that won't be dlpreopened + old_dlfiles="$dlfiles" + dlfiles= + for lib in $old_dlfiles; do + case " $dlprefiles $dlfiles " in + *" $lib "*) ;; + *) func_append dlfiles " $lib" ;; + esac + done + + # Make sure dlprefiles contains only unique files + old_dlprefiles="$dlprefiles" + dlprefiles= + for lib in $old_dlprefiles; do + case "$dlprefiles " in + *" $lib "*) ;; + *) func_append dlprefiles " $lib" ;; + esac + done + + if test "$build_libtool_libs" = yes; then + if test -n "$rpath"; then + case $host in + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos* | *-cegcc* | *-*-haiku*) + # these systems don't actually have a c library (as such)! + ;; + *-*-rhapsody* | *-*-darwin1.[012]) + # Rhapsody C library is in the System framework + func_append deplibs " System.ltframework" + ;; + *-*-netbsd*) + # Don't link with libc until the a.out ld.so is fixed. + ;; + *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) + # Do not include libc due to us having libc/libc_r. + ;; + *-*-sco3.2v5* | *-*-sco5v6*) + # Causes problems with __ctype + ;; + *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*) + # Compiler inserts libc in the correct place for threads to work + ;; + *) + # Add libc to deplibs on all other systems if necessary. + if test "$build_libtool_need_lc" = "yes"; then + func_append deplibs " -lc" + fi + ;; + esac + fi + + # Transform deplibs into only deplibs that can be linked in shared. + name_save=$name + libname_save=$libname + release_save=$release + versuffix_save=$versuffix + major_save=$major + # I'm not sure if I'm treating the release correctly. I think + # release should show up in the -l (ie -lgmp5) so we don't want to + # add it in twice. Is that correct? + release="" + versuffix="" + major="" + newdeplibs= + droppeddeps=no + case $deplibs_check_method in + pass_all) + # Don't check for shared/static. Everything works. + # This might be a little naive. We might want to check + # whether the library exists or not. But this is on + # osf3 & osf4 and I'm not really sure... Just + # implementing what was already the behavior. + newdeplibs=$deplibs + ;; + test_compile) + # This code stresses the "libraries are programs" paradigm to its + # limits. Maybe even breaks it. We compile a program, linking it + # against the deplibs as a proxy for the library. Then we can check + # whether they linked in statically or dynamically with ldd. + $opt_dry_run || $RM conftest.c + cat > conftest.c </dev/null` + $nocaseglob + else + potential_libs=`ls $i/$libnameglob[.-]* 2>/dev/null` + fi + for potent_lib in $potential_libs; do + # Follow soft links. + if ls -lLd "$potent_lib" 2>/dev/null | + $GREP " -> " >/dev/null; then + continue + fi + # The statement above tries to avoid entering an + # endless loop below, in case of cyclic links. + # We might still enter an endless loop, since a link + # loop can be closed while we follow links, + # but so what? + potlib="$potent_lib" + while test -h "$potlib" 2>/dev/null; do + potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'` + case $potliblink in + [\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";; + *) potlib=`$ECHO "$potlib" | $SED 's,[^/]*$,,'`"$potliblink";; + esac + done + if eval $file_magic_cmd \"\$potlib\" 2>/dev/null | + $SED -e 10q | + $EGREP "$file_magic_regex" > /dev/null; then + func_append newdeplibs " $a_deplib" + a_deplib="" + break 2 + fi + done + done + fi + if test -n "$a_deplib" ; then + droppeddeps=yes + echo + $ECHO "*** Warning: linker path does not have real file for library $a_deplib." + echo "*** I have the capability to make that library automatically link in when" + echo "*** you link to this library. But I can only do this if you have a" + echo "*** shared version of the library, which you do not appear to have" + echo "*** because I did check the linker path looking for a file starting" + if test -z "$potlib" ; then + $ECHO "*** with $libname but no candidates were found. (...for file magic test)" + else + $ECHO "*** with $libname and none of the candidates passed a file format test" + $ECHO "*** using a file magic. Last file checked: $potlib" + fi + fi + ;; + *) + # Add a -L argument. + func_append newdeplibs " $a_deplib" + ;; + esac + done # Gone through all deplibs. + ;; + match_pattern*) + set dummy $deplibs_check_method; shift + match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"` + for a_deplib in $deplibs; do + case $a_deplib in + -l*) + func_stripname -l '' "$a_deplib" + name=$func_stripname_result + if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then + case " $predeps $postdeps " in + *" $a_deplib "*) + func_append newdeplibs " $a_deplib" + a_deplib="" + ;; + esac + fi + if test -n "$a_deplib" ; then + libname=`eval "\\$ECHO \"$libname_spec\""` + for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do + potential_libs=`ls $i/$libname[.-]* 2>/dev/null` + for potent_lib in $potential_libs; do + potlib="$potent_lib" # see symlink-check above in file_magic test + if eval "\$ECHO \"$potent_lib\"" 2>/dev/null | $SED 10q | \ + $EGREP "$match_pattern_regex" > /dev/null; then + func_append newdeplibs " $a_deplib" + a_deplib="" + break 2 + fi + done + done + fi + if test -n "$a_deplib" ; then + droppeddeps=yes + echo + $ECHO "*** Warning: linker path does not have real file for library $a_deplib." + echo "*** I have the capability to make that library automatically link in when" + echo "*** you link to this library. But I can only do this if you have a" + echo "*** shared version of the library, which you do not appear to have" + echo "*** because I did check the linker path looking for a file starting" + if test -z "$potlib" ; then + $ECHO "*** with $libname but no candidates were found. (...for regex pattern test)" + else + $ECHO "*** with $libname and none of the candidates passed a file format test" + $ECHO "*** using a regex pattern. Last file checked: $potlib" + fi + fi + ;; + *) + # Add a -L argument. + func_append newdeplibs " $a_deplib" + ;; + esac + done # Gone through all deplibs. + ;; + none | unknown | *) + newdeplibs="" + tmp_deplibs=`$ECHO " $deplibs" | $SED 's/ -lc$//; s/ -[LR][^ ]*//g'` + if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then + for i in $predeps $postdeps ; do + # can't use Xsed below, because $i might contain '/' + tmp_deplibs=`$ECHO " $tmp_deplibs" | $SED "s,$i,,"` + done + fi + case $tmp_deplibs in + *[!\ \ ]*) + echo + if test "X$deplibs_check_method" = "Xnone"; then + echo "*** Warning: inter-library dependencies are not supported in this platform." + else + echo "*** Warning: inter-library dependencies are not known to be supported." + fi + echo "*** All declared inter-library dependencies are being dropped." + droppeddeps=yes + ;; + esac + ;; + esac + versuffix=$versuffix_save + major=$major_save + release=$release_save + libname=$libname_save + name=$name_save + + case $host in + *-*-rhapsody* | *-*-darwin1.[012]) + # On Rhapsody replace the C library with the System framework + newdeplibs=`$ECHO " $newdeplibs" | $SED 's/ -lc / System.ltframework /'` + ;; + esac + + if test "$droppeddeps" = yes; then + if test "$module" = yes; then + echo + echo "*** Warning: libtool could not satisfy all declared inter-library" + $ECHO "*** dependencies of module $libname. Therefore, libtool will create" + echo "*** a static module, that should work as long as the dlopening" + echo "*** application is linked with the -dlopen flag." + if test -z "$global_symbol_pipe"; then + echo + echo "*** However, this would only work if libtool was able to extract symbol" + echo "*** lists from a program, using \`nm' or equivalent, but libtool could" + echo "*** not find such a program. So, this module is probably useless." + echo "*** \`nm' from GNU binutils and a full rebuild may help." + fi + if test "$build_old_libs" = no; then + oldlibs="$output_objdir/$libname.$libext" + build_libtool_libs=module + build_old_libs=yes + else + build_libtool_libs=no + fi + else + echo "*** The inter-library dependencies that have been dropped here will be" + echo "*** automatically added whenever a program is linked with this library" + echo "*** or is declared to -dlopen it." + + if test "$allow_undefined" = no; then + echo + echo "*** Since this library must not contain undefined symbols," + echo "*** because either the platform does not support them or" + echo "*** it was explicitly requested with -no-undefined," + echo "*** libtool will only create a static version of it." + if test "$build_old_libs" = no; then + oldlibs="$output_objdir/$libname.$libext" + build_libtool_libs=module + build_old_libs=yes + else + build_libtool_libs=no + fi + fi + fi + fi + # Done checking deplibs! + deplibs=$newdeplibs + fi + # Time to change all our "foo.ltframework" stuff back to "-framework foo" + case $host in + *-*-darwin*) + newdeplibs=`$ECHO " $newdeplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` + new_inherited_linker_flags=`$ECHO " $new_inherited_linker_flags" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` + deplibs=`$ECHO " $deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` + ;; + esac + + # move library search paths that coincide with paths to not yet + # installed libraries to the beginning of the library search list + new_libs= + for path in $notinst_path; do + case " $new_libs " in + *" -L$path/$objdir "*) ;; + *) + case " $deplibs " in + *" -L$path/$objdir "*) + func_append new_libs " -L$path/$objdir" ;; + esac + ;; + esac + done + for deplib in $deplibs; do + case $deplib in + -L*) + case " $new_libs " in + *" $deplib "*) ;; + *) func_append new_libs " $deplib" ;; + esac + ;; + *) func_append new_libs " $deplib" ;; + esac + done + deplibs="$new_libs" + + # All the library-specific variables (install_libdir is set above). + library_names= + old_library= + dlname= + + # Test again, we may have decided not to build it any more + if test "$build_libtool_libs" = yes; then + # Remove ${wl} instances when linking with ld. + # FIXME: should test the right _cmds variable. + case $archive_cmds in + *\$LD\ *) wl= ;; + esac + if test "$hardcode_into_libs" = yes; then + # Hardcode the library paths + hardcode_libdirs= + dep_rpath= + rpath="$finalize_rpath" + test "$opt_mode" != relink && rpath="$compile_rpath$rpath" + for libdir in $rpath; do + if test -n "$hardcode_libdir_flag_spec"; then + if test -n "$hardcode_libdir_separator"; then + func_replace_sysroot "$libdir" + libdir=$func_replace_sysroot_result + if test -z "$hardcode_libdirs"; then + hardcode_libdirs="$libdir" + else + # Just accumulate the unique libdirs. + case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in + *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) + ;; + *) + func_append hardcode_libdirs "$hardcode_libdir_separator$libdir" + ;; + esac + fi + else + eval flag=\"$hardcode_libdir_flag_spec\" + func_append dep_rpath " $flag" + fi + elif test -n "$runpath_var"; then + case "$perm_rpath " in + *" $libdir "*) ;; + *) func_append perm_rpath " $libdir" ;; + esac + fi + done + # Substitute the hardcoded libdirs into the rpath. + if test -n "$hardcode_libdir_separator" && + test -n "$hardcode_libdirs"; then + libdir="$hardcode_libdirs" + eval "dep_rpath=\"$hardcode_libdir_flag_spec\"" + fi + if test -n "$runpath_var" && test -n "$perm_rpath"; then + # We should set the runpath_var. + rpath= + for dir in $perm_rpath; do + func_append rpath "$dir:" + done + eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var" + fi + test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs" + fi + + shlibpath="$finalize_shlibpath" + test "$opt_mode" != relink && shlibpath="$compile_shlibpath$shlibpath" + if test -n "$shlibpath"; then + eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var" + fi + + # Get the real and link names of the library. + eval shared_ext=\"$shrext_cmds\" + eval library_names=\"$library_names_spec\" + set dummy $library_names + shift + realname="$1" + shift + + if test -n "$soname_spec"; then + eval soname=\"$soname_spec\" + else + soname="$realname" + fi + if test -z "$dlname"; then + dlname=$soname + fi + + lib="$output_objdir/$realname" + linknames= + for link + do + func_append linknames " $link" + done + + # Use standard objects if they are pic + test -z "$pic_flag" && libobjs=`$ECHO "$libobjs" | $SP2NL | $SED "$lo2o" | $NL2SP` + test "X$libobjs" = "X " && libobjs= + + delfiles= + if test -n "$export_symbols" && test -n "$include_expsyms"; then + $opt_dry_run || cp "$export_symbols" "$output_objdir/$libname.uexp" + export_symbols="$output_objdir/$libname.uexp" + func_append delfiles " $export_symbols" + fi + + orig_export_symbols= + case $host_os in + cygwin* | mingw* | cegcc*) + if test -n "$export_symbols" && test -z "$export_symbols_regex"; then + # exporting using user supplied symfile + if test "x`$SED 1q $export_symbols`" != xEXPORTS; then + # and it's NOT already a .def file. Must figure out + # which of the given symbols are data symbols and tag + # them as such. So, trigger use of export_symbols_cmds. + # export_symbols gets reassigned inside the "prepare + # the list of exported symbols" if statement, so the + # include_expsyms logic still works. + orig_export_symbols="$export_symbols" + export_symbols= + always_export_symbols=yes + fi + fi + ;; + esac + + # Prepare the list of exported symbols + if test -z "$export_symbols"; then + if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then + func_verbose "generating symbol list for \`$libname.la'" + export_symbols="$output_objdir/$libname.exp" + $opt_dry_run || $RM $export_symbols + cmds=$export_symbols_cmds + save_ifs="$IFS"; IFS='~' + for cmd1 in $cmds; do + IFS="$save_ifs" + # Take the normal branch if the nm_file_list_spec branch + # doesn't work or if tool conversion is not needed. + case $nm_file_list_spec~$to_tool_file_cmd in + *~func_convert_file_noop | *~func_convert_file_msys_to_w32 | ~*) + try_normal_branch=yes + eval cmd=\"$cmd1\" + func_len " $cmd" + len=$func_len_result + ;; + *) + try_normal_branch=no + ;; + esac + if test "$try_normal_branch" = yes \ + && { test "$len" -lt "$max_cmd_len" \ + || test "$max_cmd_len" -le -1; } + then + func_show_eval "$cmd" 'exit $?' + skipped_export=false + elif test -n "$nm_file_list_spec"; then + func_basename "$output" + output_la=$func_basename_result + save_libobjs=$libobjs + save_output=$output + output=${output_objdir}/${output_la}.nm + func_to_tool_file "$output" + libobjs=$nm_file_list_spec$func_to_tool_file_result + func_append delfiles " $output" + func_verbose "creating $NM input file list: $output" + for obj in $save_libobjs; do + func_to_tool_file "$obj" + $ECHO "$func_to_tool_file_result" + done > "$output" + eval cmd=\"$cmd1\" + func_show_eval "$cmd" 'exit $?' + output=$save_output + libobjs=$save_libobjs + skipped_export=false + else + # The command line is too long to execute in one step. + func_verbose "using reloadable object file for export list..." + skipped_export=: + # Break out early, otherwise skipped_export may be + # set to false by a later but shorter cmd. + break + fi + done + IFS="$save_ifs" + if test -n "$export_symbols_regex" && test "X$skipped_export" != "X:"; then + func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"' + func_show_eval '$MV "${export_symbols}T" "$export_symbols"' + fi + fi + fi + + if test -n "$export_symbols" && test -n "$include_expsyms"; then + tmp_export_symbols="$export_symbols" + test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols" + $opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"' + fi + + if test "X$skipped_export" != "X:" && test -n "$orig_export_symbols"; then + # The given exports_symbols file has to be filtered, so filter it. + func_verbose "filter symbol list for \`$libname.la' to tag DATA exports" + # FIXME: $output_objdir/$libname.filter potentially contains lots of + # 's' commands which not all seds can handle. GNU sed should be fine + # though. Also, the filter scales superlinearly with the number of + # global variables. join(1) would be nice here, but unfortunately + # isn't a blessed tool. + $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter + func_append delfiles " $export_symbols $output_objdir/$libname.filter" + export_symbols=$output_objdir/$libname.def + $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols + fi + + tmp_deplibs= + for test_deplib in $deplibs; do + case " $convenience " in + *" $test_deplib "*) ;; + *) + func_append tmp_deplibs " $test_deplib" + ;; + esac + done + deplibs="$tmp_deplibs" + + if test -n "$convenience"; then + if test -n "$whole_archive_flag_spec" && + test "$compiler_needs_object" = yes && + test -z "$libobjs"; then + # extract the archives, so we have objects to list. + # TODO: could optimize this to just extract one archive. + whole_archive_flag_spec= + fi + if test -n "$whole_archive_flag_spec"; then + save_libobjs=$libobjs + eval libobjs=\"\$libobjs $whole_archive_flag_spec\" + test "X$libobjs" = "X " && libobjs= + else + gentop="$output_objdir/${outputname}x" + func_append generated " $gentop" + + func_extract_archives $gentop $convenience + func_append libobjs " $func_extract_archives_result" + test "X$libobjs" = "X " && libobjs= + fi + fi + + if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then + eval flag=\"$thread_safe_flag_spec\" + func_append linker_flags " $flag" + fi + + # Make a backup of the uninstalled library when relinking + if test "$opt_mode" = relink; then + $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}U && $MV $realname ${realname}U)' || exit $? + fi + + # Do each of the archive commands. + if test "$module" = yes && test -n "$module_cmds" ; then + if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then + eval test_cmds=\"$module_expsym_cmds\" + cmds=$module_expsym_cmds + else + eval test_cmds=\"$module_cmds\" + cmds=$module_cmds + fi + else + if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then + eval test_cmds=\"$archive_expsym_cmds\" + cmds=$archive_expsym_cmds + else + eval test_cmds=\"$archive_cmds\" + cmds=$archive_cmds + fi + fi + + if test "X$skipped_export" != "X:" && + func_len " $test_cmds" && + len=$func_len_result && + test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then + : + else + # The command line is too long to link in one step, link piecewise + # or, if using GNU ld and skipped_export is not :, use a linker + # script. + + # Save the value of $output and $libobjs because we want to + # use them later. If we have whole_archive_flag_spec, we + # want to use save_libobjs as it was before + # whole_archive_flag_spec was expanded, because we can't + # assume the linker understands whole_archive_flag_spec. + # This may have to be revisited, in case too many + # convenience libraries get linked in and end up exceeding + # the spec. + if test -z "$convenience" || test -z "$whole_archive_flag_spec"; then + save_libobjs=$libobjs + fi + save_output=$output + func_basename "$output" + output_la=$func_basename_result + + # Clear the reloadable object creation command queue and + # initialize k to one. + test_cmds= + concat_cmds= + objlist= + last_robj= + k=1 + + if test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "$with_gnu_ld" = yes; then + output=${output_objdir}/${output_la}.lnkscript + func_verbose "creating GNU ld script: $output" + echo 'INPUT (' > $output + for obj in $save_libobjs + do + func_to_tool_file "$obj" + $ECHO "$func_to_tool_file_result" >> $output + done + echo ')' >> $output + func_append delfiles " $output" + func_to_tool_file "$output" + output=$func_to_tool_file_result + elif test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "X$file_list_spec" != X; then + output=${output_objdir}/${output_la}.lnk + func_verbose "creating linker input file list: $output" + : > $output + set x $save_libobjs + shift + firstobj= + if test "$compiler_needs_object" = yes; then + firstobj="$1 " + shift + fi + for obj + do + func_to_tool_file "$obj" + $ECHO "$func_to_tool_file_result" >> $output + done + func_append delfiles " $output" + func_to_tool_file "$output" + output=$firstobj\"$file_list_spec$func_to_tool_file_result\" + else + if test -n "$save_libobjs"; then + func_verbose "creating reloadable object files..." + output=$output_objdir/$output_la-${k}.$objext + eval test_cmds=\"$reload_cmds\" + func_len " $test_cmds" + len0=$func_len_result + len=$len0 + + # Loop over the list of objects to be linked. + for obj in $save_libobjs + do + func_len " $obj" + func_arith $len + $func_len_result + len=$func_arith_result + if test "X$objlist" = X || + test "$len" -lt "$max_cmd_len"; then + func_append objlist " $obj" + else + # The command $test_cmds is almost too long, add a + # command to the queue. + if test "$k" -eq 1 ; then + # The first file doesn't have a previous command to add. + reload_objs=$objlist + eval concat_cmds=\"$reload_cmds\" + else + # All subsequent reloadable object files will link in + # the last one created. + reload_objs="$objlist $last_robj" + eval concat_cmds=\"\$concat_cmds~$reload_cmds~\$RM $last_robj\" + fi + last_robj=$output_objdir/$output_la-${k}.$objext + func_arith $k + 1 + k=$func_arith_result + output=$output_objdir/$output_la-${k}.$objext + objlist=" $obj" + func_len " $last_robj" + func_arith $len0 + $func_len_result + len=$func_arith_result + fi + done + # Handle the remaining objects by creating one last + # reloadable object file. All subsequent reloadable object + # files will link in the last one created. + test -z "$concat_cmds" || concat_cmds=$concat_cmds~ + reload_objs="$objlist $last_robj" + eval concat_cmds=\"\${concat_cmds}$reload_cmds\" + if test -n "$last_robj"; then + eval concat_cmds=\"\${concat_cmds}~\$RM $last_robj\" + fi + func_append delfiles " $output" + + else + output= + fi + + if ${skipped_export-false}; then + func_verbose "generating symbol list for \`$libname.la'" + export_symbols="$output_objdir/$libname.exp" + $opt_dry_run || $RM $export_symbols + libobjs=$output + # Append the command to create the export file. + test -z "$concat_cmds" || concat_cmds=$concat_cmds~ + eval concat_cmds=\"\$concat_cmds$export_symbols_cmds\" + if test -n "$last_robj"; then + eval concat_cmds=\"\$concat_cmds~\$RM $last_robj\" + fi + fi + + test -n "$save_libobjs" && + func_verbose "creating a temporary reloadable object file: $output" + + # Loop through the commands generated above and execute them. + save_ifs="$IFS"; IFS='~' + for cmd in $concat_cmds; do + IFS="$save_ifs" + $opt_silent || { + func_quote_for_expand "$cmd" + eval "func_echo $func_quote_for_expand_result" + } + $opt_dry_run || eval "$cmd" || { + lt_exit=$? + + # Restore the uninstalled library and exit + if test "$opt_mode" = relink; then + ( cd "$output_objdir" && \ + $RM "${realname}T" && \ + $MV "${realname}U" "$realname" ) + fi + + exit $lt_exit + } + done + IFS="$save_ifs" + + if test -n "$export_symbols_regex" && ${skipped_export-false}; then + func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"' + func_show_eval '$MV "${export_symbols}T" "$export_symbols"' + fi + fi + + if ${skipped_export-false}; then + if test -n "$export_symbols" && test -n "$include_expsyms"; then + tmp_export_symbols="$export_symbols" + test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols" + $opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"' + fi + + if test -n "$orig_export_symbols"; then + # The given exports_symbols file has to be filtered, so filter it. + func_verbose "filter symbol list for \`$libname.la' to tag DATA exports" + # FIXME: $output_objdir/$libname.filter potentially contains lots of + # 's' commands which not all seds can handle. GNU sed should be fine + # though. Also, the filter scales superlinearly with the number of + # global variables. join(1) would be nice here, but unfortunately + # isn't a blessed tool. + $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter + func_append delfiles " $export_symbols $output_objdir/$libname.filter" + export_symbols=$output_objdir/$libname.def + $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols + fi + fi + + libobjs=$output + # Restore the value of output. + output=$save_output + + if test -n "$convenience" && test -n "$whole_archive_flag_spec"; then + eval libobjs=\"\$libobjs $whole_archive_flag_spec\" + test "X$libobjs" = "X " && libobjs= + fi + # Expand the library linking commands again to reset the + # value of $libobjs for piecewise linking. + + # Do each of the archive commands. + if test "$module" = yes && test -n "$module_cmds" ; then + if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then + cmds=$module_expsym_cmds + else + cmds=$module_cmds + fi + else + if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then + cmds=$archive_expsym_cmds + else + cmds=$archive_cmds + fi + fi + fi + + if test -n "$delfiles"; then + # Append the command to remove temporary files to $cmds. + eval cmds=\"\$cmds~\$RM $delfiles\" + fi + + # Add any objects from preloaded convenience libraries + if test -n "$dlprefiles"; then + gentop="$output_objdir/${outputname}x" + func_append generated " $gentop" + + func_extract_archives $gentop $dlprefiles + func_append libobjs " $func_extract_archives_result" + test "X$libobjs" = "X " && libobjs= + fi + + save_ifs="$IFS"; IFS='~' + for cmd in $cmds; do + IFS="$save_ifs" + eval cmd=\"$cmd\" + $opt_silent || { + func_quote_for_expand "$cmd" + eval "func_echo $func_quote_for_expand_result" + } + $opt_dry_run || eval "$cmd" || { + lt_exit=$? + + # Restore the uninstalled library and exit + if test "$opt_mode" = relink; then + ( cd "$output_objdir" && \ + $RM "${realname}T" && \ + $MV "${realname}U" "$realname" ) + fi + + exit $lt_exit + } + done + IFS="$save_ifs" + + # Restore the uninstalled library and exit + if test "$opt_mode" = relink; then + $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}T && $MV $realname ${realname}T && $MV ${realname}U $realname)' || exit $? + + if test -n "$convenience"; then + if test -z "$whole_archive_flag_spec"; then + func_show_eval '${RM}r "$gentop"' + fi + fi + + exit $EXIT_SUCCESS + fi + + # Create links to the real library. + for linkname in $linknames; do + if test "$realname" != "$linkname"; then + func_show_eval '(cd "$output_objdir" && $RM "$linkname" && $LN_S "$realname" "$linkname")' 'exit $?' + fi + done + + # If -module or -export-dynamic was specified, set the dlname. + if test "$module" = yes || test "$export_dynamic" = yes; then + # On all known operating systems, these are identical. + dlname="$soname" + fi + fi + ;; + + obj) + if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then + func_warning "\`-dlopen' is ignored for objects" + fi + + case " $deplibs" in + *\ -l* | *\ -L*) + func_warning "\`-l' and \`-L' are ignored for objects" ;; + esac + + test -n "$rpath" && \ + func_warning "\`-rpath' is ignored for objects" + + test -n "$xrpath" && \ + func_warning "\`-R' is ignored for objects" + + test -n "$vinfo" && \ + func_warning "\`-version-info' is ignored for objects" + + test -n "$release" && \ + func_warning "\`-release' is ignored for objects" + + case $output in + *.lo) + test -n "$objs$old_deplibs" && \ + func_fatal_error "cannot build library object \`$output' from non-libtool objects" + + libobj=$output + func_lo2o "$libobj" + obj=$func_lo2o_result + ;; + *) + libobj= + obj="$output" + ;; + esac + + # Delete the old objects. + $opt_dry_run || $RM $obj $libobj + + # Objects from convenience libraries. This assumes + # single-version convenience libraries. Whenever we create + # different ones for PIC/non-PIC, this we'll have to duplicate + # the extraction. + reload_conv_objs= + gentop= + # reload_cmds runs $LD directly, so let us get rid of + # -Wl from whole_archive_flag_spec and hope we can get by with + # turning comma into space.. + wl= + + if test -n "$convenience"; then + if test -n "$whole_archive_flag_spec"; then + eval tmp_whole_archive_flags=\"$whole_archive_flag_spec\" + reload_conv_objs=$reload_objs\ `$ECHO "$tmp_whole_archive_flags" | $SED 's|,| |g'` + else + gentop="$output_objdir/${obj}x" + func_append generated " $gentop" + + func_extract_archives $gentop $convenience + reload_conv_objs="$reload_objs $func_extract_archives_result" + fi + fi + + # If we're not building shared, we need to use non_pic_objs + test "$build_libtool_libs" != yes && libobjs="$non_pic_objects" + + # Create the old-style object. + reload_objs="$objs$old_deplibs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.${libext}$/d; /\.lib$/d; $lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test + + output="$obj" + func_execute_cmds "$reload_cmds" 'exit $?' + + # Exit if we aren't doing a library object file. + if test -z "$libobj"; then + if test -n "$gentop"; then + func_show_eval '${RM}r "$gentop"' + fi + + exit $EXIT_SUCCESS + fi + + if test "$build_libtool_libs" != yes; then + if test -n "$gentop"; then + func_show_eval '${RM}r "$gentop"' + fi + + # Create an invalid libtool object if no PIC, so that we don't + # accidentally link it into a program. + # $show "echo timestamp > $libobj" + # $opt_dry_run || eval "echo timestamp > $libobj" || exit $? + exit $EXIT_SUCCESS + fi + + if test -n "$pic_flag" || test "$pic_mode" != default; then + # Only do commands if we really have different PIC objects. + reload_objs="$libobjs $reload_conv_objs" + output="$libobj" + func_execute_cmds "$reload_cmds" 'exit $?' + fi + + if test -n "$gentop"; then + func_show_eval '${RM}r "$gentop"' + fi + + exit $EXIT_SUCCESS + ;; + + prog) + case $host in + *cygwin*) func_stripname '' '.exe' "$output" + output=$func_stripname_result.exe;; + esac + test -n "$vinfo" && \ + func_warning "\`-version-info' is ignored for programs" + + test -n "$release" && \ + func_warning "\`-release' is ignored for programs" + + test "$preload" = yes \ + && test "$dlopen_support" = unknown \ + && test "$dlopen_self" = unknown \ + && test "$dlopen_self_static" = unknown && \ + func_warning "\`LT_INIT([dlopen])' not used. Assuming no dlopen support." + + case $host in + *-*-rhapsody* | *-*-darwin1.[012]) + # On Rhapsody replace the C library is the System framework + compile_deplibs=`$ECHO " $compile_deplibs" | $SED 's/ -lc / System.ltframework /'` + finalize_deplibs=`$ECHO " $finalize_deplibs" | $SED 's/ -lc / System.ltframework /'` + ;; + esac + + case $host in + *-*-darwin*) + # Don't allow lazy linking, it breaks C++ global constructors + # But is supposedly fixed on 10.4 or later (yay!). + if test "$tagname" = CXX ; then + case ${MACOSX_DEPLOYMENT_TARGET-10.0} in + 10.[0123]) + func_append compile_command " ${wl}-bind_at_load" + func_append finalize_command " ${wl}-bind_at_load" + ;; + esac + fi + # Time to change all our "foo.ltframework" stuff back to "-framework foo" + compile_deplibs=`$ECHO " $compile_deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` + finalize_deplibs=`$ECHO " $finalize_deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` + ;; + esac + + + # move library search paths that coincide with paths to not yet + # installed libraries to the beginning of the library search list + new_libs= + for path in $notinst_path; do + case " $new_libs " in + *" -L$path/$objdir "*) ;; + *) + case " $compile_deplibs " in + *" -L$path/$objdir "*) + func_append new_libs " -L$path/$objdir" ;; + esac + ;; + esac + done + for deplib in $compile_deplibs; do + case $deplib in + -L*) + case " $new_libs " in + *" $deplib "*) ;; + *) func_append new_libs " $deplib" ;; + esac + ;; + *) func_append new_libs " $deplib" ;; + esac + done + compile_deplibs="$new_libs" + + + func_append compile_command " $compile_deplibs" + func_append finalize_command " $finalize_deplibs" + + if test -n "$rpath$xrpath"; then + # If the user specified any rpath flags, then add them. + for libdir in $rpath $xrpath; do + # This is the magic to use -rpath. + case "$finalize_rpath " in + *" $libdir "*) ;; + *) func_append finalize_rpath " $libdir" ;; + esac + done + fi + + # Now hardcode the library paths + rpath= + hardcode_libdirs= + for libdir in $compile_rpath $finalize_rpath; do + if test -n "$hardcode_libdir_flag_spec"; then + if test -n "$hardcode_libdir_separator"; then + if test -z "$hardcode_libdirs"; then + hardcode_libdirs="$libdir" + else + # Just accumulate the unique libdirs. + case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in + *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) + ;; + *) + func_append hardcode_libdirs "$hardcode_libdir_separator$libdir" + ;; + esac + fi + else + eval flag=\"$hardcode_libdir_flag_spec\" + func_append rpath " $flag" + fi + elif test -n "$runpath_var"; then + case "$perm_rpath " in + *" $libdir "*) ;; + *) func_append perm_rpath " $libdir" ;; + esac + fi + case $host in + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*) + testbindir=`${ECHO} "$libdir" | ${SED} -e 's*/lib$*/bin*'` + case :$dllsearchpath: in + *":$libdir:"*) ;; + ::) dllsearchpath=$libdir;; + *) func_append dllsearchpath ":$libdir";; + esac + case :$dllsearchpath: in + *":$testbindir:"*) ;; + ::) dllsearchpath=$testbindir;; + *) func_append dllsearchpath ":$testbindir";; + esac + ;; + esac + done + # Substitute the hardcoded libdirs into the rpath. + if test -n "$hardcode_libdir_separator" && + test -n "$hardcode_libdirs"; then + libdir="$hardcode_libdirs" + eval rpath=\" $hardcode_libdir_flag_spec\" + fi + compile_rpath="$rpath" + + rpath= + hardcode_libdirs= + for libdir in $finalize_rpath; do + if test -n "$hardcode_libdir_flag_spec"; then + if test -n "$hardcode_libdir_separator"; then + if test -z "$hardcode_libdirs"; then + hardcode_libdirs="$libdir" + else + # Just accumulate the unique libdirs. + case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in + *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) + ;; + *) + func_append hardcode_libdirs "$hardcode_libdir_separator$libdir" + ;; + esac + fi + else + eval flag=\"$hardcode_libdir_flag_spec\" + func_append rpath " $flag" + fi + elif test -n "$runpath_var"; then + case "$finalize_perm_rpath " in + *" $libdir "*) ;; + *) func_append finalize_perm_rpath " $libdir" ;; + esac + fi + done + # Substitute the hardcoded libdirs into the rpath. + if test -n "$hardcode_libdir_separator" && + test -n "$hardcode_libdirs"; then + libdir="$hardcode_libdirs" + eval rpath=\" $hardcode_libdir_flag_spec\" + fi + finalize_rpath="$rpath" + + if test -n "$libobjs" && test "$build_old_libs" = yes; then + # Transform all the library objects into standard objects. + compile_command=`$ECHO "$compile_command" | $SP2NL | $SED "$lo2o" | $NL2SP` + finalize_command=`$ECHO "$finalize_command" | $SP2NL | $SED "$lo2o" | $NL2SP` + fi + + func_generate_dlsyms "$outputname" "@PROGRAM@" "no" + + # template prelinking step + if test -n "$prelink_cmds"; then + func_execute_cmds "$prelink_cmds" 'exit $?' + fi + + wrappers_required=yes + case $host in + *cegcc* | *mingw32ce*) + # Disable wrappers for cegcc and mingw32ce hosts, we are cross compiling anyway. + wrappers_required=no + ;; + *cygwin* | *mingw* ) + if test "$build_libtool_libs" != yes; then + wrappers_required=no + fi + ;; + *) + if test "$need_relink" = no || test "$build_libtool_libs" != yes; then + wrappers_required=no + fi + ;; + esac + if test "$wrappers_required" = no; then + # Replace the output file specification. + compile_command=`$ECHO "$compile_command" | $SED 's%@OUTPUT@%'"$output"'%g'` + link_command="$compile_command$compile_rpath" + + # We have no uninstalled library dependencies, so finalize right now. + exit_status=0 + func_show_eval "$link_command" 'exit_status=$?' + + if test -n "$postlink_cmds"; then + func_to_tool_file "$output" + postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'` + func_execute_cmds "$postlink_cmds" 'exit $?' + fi + + # Delete the generated files. + if test -f "$output_objdir/${outputname}S.${objext}"; then + func_show_eval '$RM "$output_objdir/${outputname}S.${objext}"' + fi + + exit $exit_status + fi + + if test -n "$compile_shlibpath$finalize_shlibpath"; then + compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command" + fi + if test -n "$finalize_shlibpath"; then + finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\" $finalize_command" + fi + + compile_var= + finalize_var= + if test -n "$runpath_var"; then + if test -n "$perm_rpath"; then + # We should set the runpath_var. + rpath= + for dir in $perm_rpath; do + func_append rpath "$dir:" + done + compile_var="$runpath_var=\"$rpath\$$runpath_var\" " + fi + if test -n "$finalize_perm_rpath"; then + # We should set the runpath_var. + rpath= + for dir in $finalize_perm_rpath; do + func_append rpath "$dir:" + done + finalize_var="$runpath_var=\"$rpath\$$runpath_var\" " + fi + fi + + if test "$no_install" = yes; then + # We don't need to create a wrapper script. + link_command="$compile_var$compile_command$compile_rpath" + # Replace the output file specification. + link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output"'%g'` + # Delete the old output file. + $opt_dry_run || $RM $output + # Link the executable and exit + func_show_eval "$link_command" 'exit $?' + + if test -n "$postlink_cmds"; then + func_to_tool_file "$output" + postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'` + func_execute_cmds "$postlink_cmds" 'exit $?' + fi + + exit $EXIT_SUCCESS + fi + + if test "$hardcode_action" = relink; then + # Fast installation is not supported + link_command="$compile_var$compile_command$compile_rpath" + relink_command="$finalize_var$finalize_command$finalize_rpath" + + func_warning "this platform does not like uninstalled shared libraries" + func_warning "\`$output' will be relinked during installation" + else + if test "$fast_install" != no; then + link_command="$finalize_var$compile_command$finalize_rpath" + if test "$fast_install" = yes; then + relink_command=`$ECHO "$compile_var$compile_command$compile_rpath" | $SED 's%@OUTPUT@%\$progdir/\$file%g'` + else + # fast_install is set to needless + relink_command= + fi + else + link_command="$compile_var$compile_command$compile_rpath" + relink_command="$finalize_var$finalize_command$finalize_rpath" + fi + fi + + # Replace the output file specification. + link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'` + + # Delete the old output files. + $opt_dry_run || $RM $output $output_objdir/$outputname $output_objdir/lt-$outputname + + func_show_eval "$link_command" 'exit $?' + + if test -n "$postlink_cmds"; then + func_to_tool_file "$output_objdir/$outputname" + postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'` + func_execute_cmds "$postlink_cmds" 'exit $?' + fi + + # Now create the wrapper script. + func_verbose "creating $output" + + # Quote the relink command for shipping. + if test -n "$relink_command"; then + # Preserve any variables that may affect compiler behavior + for var in $variables_saved_for_relink; do + if eval test -z \"\${$var+set}\"; then + relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command" + elif eval var_value=\$$var; test -z "$var_value"; then + relink_command="$var=; export $var; $relink_command" + else + func_quote_for_eval "$var_value" + relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command" + fi + done + relink_command="(cd `pwd`; $relink_command)" + relink_command=`$ECHO "$relink_command" | $SED "$sed_quote_subst"` + fi + + # Only actually do things if not in dry run mode. + $opt_dry_run || { + # win32 will think the script is a binary if it has + # a .exe suffix, so we strip it off here. + case $output in + *.exe) func_stripname '' '.exe' "$output" + output=$func_stripname_result ;; + esac + # test for cygwin because mv fails w/o .exe extensions + case $host in + *cygwin*) + exeext=.exe + func_stripname '' '.exe' "$outputname" + outputname=$func_stripname_result ;; + *) exeext= ;; + esac + case $host in + *cygwin* | *mingw* ) + func_dirname_and_basename "$output" "" "." + output_name=$func_basename_result + output_path=$func_dirname_result + cwrappersource="$output_path/$objdir/lt-$output_name.c" + cwrapper="$output_path/$output_name.exe" + $RM $cwrappersource $cwrapper + trap "$RM $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15 + + func_emit_cwrapperexe_src > $cwrappersource + + # The wrapper executable is built using the $host compiler, + # because it contains $host paths and files. If cross- + # compiling, it, like the target executable, must be + # executed on the $host or under an emulation environment. + $opt_dry_run || { + $LTCC $LTCFLAGS -o $cwrapper $cwrappersource + $STRIP $cwrapper + } + + # Now, create the wrapper script for func_source use: + func_ltwrapper_scriptname $cwrapper + $RM $func_ltwrapper_scriptname_result + trap "$RM $func_ltwrapper_scriptname_result; exit $EXIT_FAILURE" 1 2 15 + $opt_dry_run || { + # note: this script will not be executed, so do not chmod. + if test "x$build" = "x$host" ; then + $cwrapper --lt-dump-script > $func_ltwrapper_scriptname_result + else + func_emit_wrapper no > $func_ltwrapper_scriptname_result + fi + } + ;; + * ) + $RM $output + trap "$RM $output; exit $EXIT_FAILURE" 1 2 15 + + func_emit_wrapper no > $output + chmod +x $output + ;; + esac + } + exit $EXIT_SUCCESS + ;; + esac + + # See if we need to build an old-fashioned archive. + for oldlib in $oldlibs; do + + if test "$build_libtool_libs" = convenience; then + oldobjs="$libobjs_save $symfileobj" + addlibs="$convenience" + build_libtool_libs=no + else + if test "$build_libtool_libs" = module; then + oldobjs="$libobjs_save" + build_libtool_libs=no + else + oldobjs="$old_deplibs $non_pic_objects" + if test "$preload" = yes && test -f "$symfileobj"; then + func_append oldobjs " $symfileobj" + fi + fi + addlibs="$old_convenience" + fi + + if test -n "$addlibs"; then + gentop="$output_objdir/${outputname}x" + func_append generated " $gentop" + + func_extract_archives $gentop $addlibs + func_append oldobjs " $func_extract_archives_result" + fi + + # Do each command in the archive commands. + if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then + cmds=$old_archive_from_new_cmds + else + + # Add any objects from preloaded convenience libraries + if test -n "$dlprefiles"; then + gentop="$output_objdir/${outputname}x" + func_append generated " $gentop" + + func_extract_archives $gentop $dlprefiles + func_append oldobjs " $func_extract_archives_result" + fi + + # POSIX demands no paths to be encoded in archives. We have + # to avoid creating archives with duplicate basenames if we + # might have to extract them afterwards, e.g., when creating a + # static archive out of a convenience library, or when linking + # the entirety of a libtool archive into another (currently + # not supported by libtool). + if (for obj in $oldobjs + do + func_basename "$obj" + $ECHO "$func_basename_result" + done | sort | sort -uc >/dev/null 2>&1); then + : + else + echo "copying selected object files to avoid basename conflicts..." + gentop="$output_objdir/${outputname}x" + func_append generated " $gentop" + func_mkdir_p "$gentop" + save_oldobjs=$oldobjs + oldobjs= + counter=1 + for obj in $save_oldobjs + do + func_basename "$obj" + objbase="$func_basename_result" + case " $oldobjs " in + " ") oldobjs=$obj ;; + *[\ /]"$objbase "*) + while :; do + # Make sure we don't pick an alternate name that also + # overlaps. + newobj=lt$counter-$objbase + func_arith $counter + 1 + counter=$func_arith_result + case " $oldobjs " in + *[\ /]"$newobj "*) ;; + *) if test ! -f "$gentop/$newobj"; then break; fi ;; + esac + done + func_show_eval "ln $obj $gentop/$newobj || cp $obj $gentop/$newobj" + func_append oldobjs " $gentop/$newobj" + ;; + *) func_append oldobjs " $obj" ;; + esac + done + fi + func_to_tool_file "$oldlib" func_convert_file_msys_to_w32 + tool_oldlib=$func_to_tool_file_result + eval cmds=\"$old_archive_cmds\" + + func_len " $cmds" + len=$func_len_result + if test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then + cmds=$old_archive_cmds + elif test -n "$archiver_list_spec"; then + func_verbose "using command file archive linking..." + for obj in $oldobjs + do + func_to_tool_file "$obj" + $ECHO "$func_to_tool_file_result" + done > $output_objdir/$libname.libcmd + func_to_tool_file "$output_objdir/$libname.libcmd" + oldobjs=" $archiver_list_spec$func_to_tool_file_result" + cmds=$old_archive_cmds + else + # the command line is too long to link in one step, link in parts + func_verbose "using piecewise archive linking..." + save_RANLIB=$RANLIB + RANLIB=: + objlist= + concat_cmds= + save_oldobjs=$oldobjs + oldobjs= + # Is there a better way of finding the last object in the list? + for obj in $save_oldobjs + do + last_oldobj=$obj + done + eval test_cmds=\"$old_archive_cmds\" + func_len " $test_cmds" + len0=$func_len_result + len=$len0 + for obj in $save_oldobjs + do + func_len " $obj" + func_arith $len + $func_len_result + len=$func_arith_result + func_append objlist " $obj" + if test "$len" -lt "$max_cmd_len"; then + : + else + # the above command should be used before it gets too long + oldobjs=$objlist + if test "$obj" = "$last_oldobj" ; then + RANLIB=$save_RANLIB + fi + test -z "$concat_cmds" || concat_cmds=$concat_cmds~ + eval concat_cmds=\"\${concat_cmds}$old_archive_cmds\" + objlist= + len=$len0 + fi + done + RANLIB=$save_RANLIB + oldobjs=$objlist + if test "X$oldobjs" = "X" ; then + eval cmds=\"\$concat_cmds\" + else + eval cmds=\"\$concat_cmds~\$old_archive_cmds\" + fi + fi + fi + func_execute_cmds "$cmds" 'exit $?' + done + + test -n "$generated" && \ + func_show_eval "${RM}r$generated" + + # Now create the libtool archive. + case $output in + *.la) + old_library= + test "$build_old_libs" = yes && old_library="$libname.$libext" + func_verbose "creating $output" + + # Preserve any variables that may affect compiler behavior + for var in $variables_saved_for_relink; do + if eval test -z \"\${$var+set}\"; then + relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command" + elif eval var_value=\$$var; test -z "$var_value"; then + relink_command="$var=; export $var; $relink_command" + else + func_quote_for_eval "$var_value" + relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command" + fi + done + # Quote the link command for shipping. + relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)" + relink_command=`$ECHO "$relink_command" | $SED "$sed_quote_subst"` + if test "$hardcode_automatic" = yes ; then + relink_command= + fi + + # Only create the output if not a dry run. + $opt_dry_run || { + for installed in no yes; do + if test "$installed" = yes; then + if test -z "$install_libdir"; then + break + fi + output="$output_objdir/$outputname"i + # Replace all uninstalled libtool libraries with the installed ones + newdependency_libs= + for deplib in $dependency_libs; do + case $deplib in + *.la) + func_basename "$deplib" + name="$func_basename_result" + func_resolve_sysroot "$deplib" + eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $func_resolve_sysroot_result` + test -z "$libdir" && \ + func_fatal_error "\`$deplib' is not a valid libtool archive" + func_append newdependency_libs " ${lt_sysroot:+=}$libdir/$name" + ;; + -L*) + func_stripname -L '' "$deplib" + func_replace_sysroot "$func_stripname_result" + func_append newdependency_libs " -L$func_replace_sysroot_result" + ;; + -R*) + func_stripname -R '' "$deplib" + func_replace_sysroot "$func_stripname_result" + func_append newdependency_libs " -R$func_replace_sysroot_result" + ;; + *) func_append newdependency_libs " $deplib" ;; + esac + done + dependency_libs="$newdependency_libs" + newdlfiles= + + for lib in $dlfiles; do + case $lib in + *.la) + func_basename "$lib" + name="$func_basename_result" + eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib` + test -z "$libdir" && \ + func_fatal_error "\`$lib' is not a valid libtool archive" + func_append newdlfiles " ${lt_sysroot:+=}$libdir/$name" + ;; + *) func_append newdlfiles " $lib" ;; + esac + done + dlfiles="$newdlfiles" + newdlprefiles= + for lib in $dlprefiles; do + case $lib in + *.la) + # Only pass preopened files to the pseudo-archive (for + # eventual linking with the app. that links it) if we + # didn't already link the preopened objects directly into + # the library: + func_basename "$lib" + name="$func_basename_result" + eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib` + test -z "$libdir" && \ + func_fatal_error "\`$lib' is not a valid libtool archive" + func_append newdlprefiles " ${lt_sysroot:+=}$libdir/$name" + ;; + esac + done + dlprefiles="$newdlprefiles" + else + newdlfiles= + for lib in $dlfiles; do + case $lib in + [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;; + *) abs=`pwd`"/$lib" ;; + esac + func_append newdlfiles " $abs" + done + dlfiles="$newdlfiles" + newdlprefiles= + for lib in $dlprefiles; do + case $lib in + [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;; + *) abs=`pwd`"/$lib" ;; + esac + func_append newdlprefiles " $abs" + done + dlprefiles="$newdlprefiles" + fi + $RM $output + # place dlname in correct position for cygwin + # In fact, it would be nice if we could use this code for all target + # systems that can't hard-code library paths into their executables + # and that have no shared library path variable independent of PATH, + # but it turns out we can't easily determine that from inspecting + # libtool variables, so we have to hard-code the OSs to which it + # applies here; at the moment, that means platforms that use the PE + # object format with DLL files. See the long comment at the top of + # tests/bindir.at for full details. + tdlname=$dlname + case $host,$output,$installed,$module,$dlname in + *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll | *cegcc*,*lai,yes,no,*.dll) + # If a -bindir argument was supplied, place the dll there. + if test "x$bindir" != x ; + then + func_relative_path "$install_libdir" "$bindir" + tdlname=$func_relative_path_result$dlname + else + # Otherwise fall back on heuristic. + tdlname=../bin/$dlname + fi + ;; + esac + $ECHO > $output "\ +# $outputname - a libtool library file +# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION +# +# Please DO NOT delete this file! +# It is necessary for linking the library. + +# The name that we can dlopen(3). +dlname='$tdlname' + +# Names of this library. +library_names='$library_names' + +# The name of the static archive. +old_library='$old_library' + +# Linker flags that can not go in dependency_libs. +inherited_linker_flags='$new_inherited_linker_flags' + +# Libraries that this one depends upon. +dependency_libs='$dependency_libs' + +# Names of additional weak libraries provided by this library +weak_library_names='$weak_libs' + +# Version information for $libname. +current=$current +age=$age +revision=$revision + +# Is this an already installed library? +installed=$installed + +# Should we warn about portability when linking against -modules? +shouldnotlink=$module + +# Files to dlopen/dlpreopen +dlopen='$dlfiles' +dlpreopen='$dlprefiles' + +# Directory that this library needs to be installed in: +libdir='$install_libdir'" + if test "$installed" = no && test "$need_relink" = yes; then + $ECHO >> $output "\ +relink_command=\"$relink_command\"" + fi + done + } + + # Do a symbolic link so that the libtool archive can be found in + # LD_LIBRARY_PATH before the program is installed. + func_show_eval '( cd "$output_objdir" && $RM "$outputname" && $LN_S "../$outputname" "$outputname" )' 'exit $?' + ;; + esac + exit $EXIT_SUCCESS +} + +{ test "$opt_mode" = link || test "$opt_mode" = relink; } && + func_mode_link ${1+"$@"} + + +# func_mode_uninstall arg... +func_mode_uninstall () +{ + $opt_debug + RM="$nonopt" + files= + rmforce= + exit_status=0 + + # This variable tells wrapper scripts just to set variables rather + # than running their programs. + libtool_install_magic="$magic" + + for arg + do + case $arg in + -f) func_append RM " $arg"; rmforce=yes ;; + -*) func_append RM " $arg" ;; + *) func_append files " $arg" ;; + esac + done + + test -z "$RM" && \ + func_fatal_help "you must specify an RM program" + + rmdirs= + + for file in $files; do + func_dirname "$file" "" "." + dir="$func_dirname_result" + if test "X$dir" = X.; then + odir="$objdir" + else + odir="$dir/$objdir" + fi + func_basename "$file" + name="$func_basename_result" + test "$opt_mode" = uninstall && odir="$dir" + + # Remember odir for removal later, being careful to avoid duplicates + if test "$opt_mode" = clean; then + case " $rmdirs " in + *" $odir "*) ;; + *) func_append rmdirs " $odir" ;; + esac + fi + + # Don't error if the file doesn't exist and rm -f was used. + if { test -L "$file"; } >/dev/null 2>&1 || + { test -h "$file"; } >/dev/null 2>&1 || + test -f "$file"; then + : + elif test -d "$file"; then + exit_status=1 + continue + elif test "$rmforce" = yes; then + continue + fi + + rmfiles="$file" + + case $name in + *.la) + # Possibly a libtool archive, so verify it. + if func_lalib_p "$file"; then + func_source $dir/$name + + # Delete the libtool libraries and symlinks. + for n in $library_names; do + func_append rmfiles " $odir/$n" + done + test -n "$old_library" && func_append rmfiles " $odir/$old_library" + + case "$opt_mode" in + clean) + case " $library_names " in + *" $dlname "*) ;; + *) test -n "$dlname" && func_append rmfiles " $odir/$dlname" ;; + esac + test -n "$libdir" && func_append rmfiles " $odir/$name $odir/${name}i" + ;; + uninstall) + if test -n "$library_names"; then + # Do each command in the postuninstall commands. + func_execute_cmds "$postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1' + fi + + if test -n "$old_library"; then + # Do each command in the old_postuninstall commands. + func_execute_cmds "$old_postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1' + fi + # FIXME: should reinstall the best remaining shared library. + ;; + esac + fi + ;; + + *.lo) + # Possibly a libtool object, so verify it. + if func_lalib_p "$file"; then + + # Read the .lo file + func_source $dir/$name + + # Add PIC object to the list of files to remove. + if test -n "$pic_object" && + test "$pic_object" != none; then + func_append rmfiles " $dir/$pic_object" + fi + + # Add non-PIC object to the list of files to remove. + if test -n "$non_pic_object" && + test "$non_pic_object" != none; then + func_append rmfiles " $dir/$non_pic_object" + fi + fi + ;; + + *) + if test "$opt_mode" = clean ; then + noexename=$name + case $file in + *.exe) + func_stripname '' '.exe' "$file" + file=$func_stripname_result + func_stripname '' '.exe' "$name" + noexename=$func_stripname_result + # $file with .exe has already been added to rmfiles, + # add $file without .exe + func_append rmfiles " $file" + ;; + esac + # Do a test to see if this is a libtool program. + if func_ltwrapper_p "$file"; then + if func_ltwrapper_executable_p "$file"; then + func_ltwrapper_scriptname "$file" + relink_command= + func_source $func_ltwrapper_scriptname_result + func_append rmfiles " $func_ltwrapper_scriptname_result" + else + relink_command= + func_source $dir/$noexename + fi + + # note $name still contains .exe if it was in $file originally + # as does the version of $file that was added into $rmfiles + func_append rmfiles " $odir/$name $odir/${name}S.${objext}" + if test "$fast_install" = yes && test -n "$relink_command"; then + func_append rmfiles " $odir/lt-$name" + fi + if test "X$noexename" != "X$name" ; then + func_append rmfiles " $odir/lt-${noexename}.c" + fi + fi + fi + ;; + esac + func_show_eval "$RM $rmfiles" 'exit_status=1' + done + + # Try to remove the ${objdir}s in the directories where we deleted files + for dir in $rmdirs; do + if test -d "$dir"; then + func_show_eval "rmdir $dir >/dev/null 2>&1" + fi + done + + exit $exit_status +} + +{ test "$opt_mode" = uninstall || test "$opt_mode" = clean; } && + func_mode_uninstall ${1+"$@"} + +test -z "$opt_mode" && { + help="$generic_help" + func_fatal_help "you must specify a MODE" +} + +test -z "$exec_cmd" && \ + func_fatal_help "invalid operation mode \`$opt_mode'" + +if test -n "$exec_cmd"; then + eval exec "$exec_cmd" + exit $EXIT_FAILURE +fi + +exit $exit_status + + +# The TAGs below are defined such that we never get into a situation +# in which we disable both kinds of libraries. Given conflicting +# choices, we go for a static library, that is the most portable, +# since we can't tell whether shared libraries were disabled because +# the user asked for that or because the platform doesn't support +# them. This is particularly important on AIX, because we don't +# support having both static and shared libraries enabled at the same +# time on that platform, so we default to a shared-only configuration. +# If a disable-shared tag is given, we'll fallback to a static-only +# configuration. But we'll never go from static-only to shared-only. + +# ### BEGIN LIBTOOL TAG CONFIG: disable-shared +build_libtool_libs=no +build_old_libs=yes +# ### END LIBTOOL TAG CONFIG: disable-shared + +# ### BEGIN LIBTOOL TAG CONFIG: disable-static +build_old_libs=`case $build_libtool_libs in yes) echo no;; *) echo yes;; esac` +# ### END LIBTOOL TAG CONFIG: disable-static + +# Local Variables: +# mode:shell-script +# sh-indentation:2 +# End: +# vi:sw=2 + ADDED autoconf/missing Index: autoconf/missing ================================================================== --- autoconf/missing +++ autoconf/missing @@ -0,0 +1,331 @@ +#! /bin/sh +# Common stub for a few missing GNU programs while installing. + +scriptversion=2012-01-06.13; # UTC + +# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005, 2006, +# 2008, 2009, 2010, 2011, 2012 Free Software Foundation, Inc. +# Originally by Fran,cois Pinard , 1996. + +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . + +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + +if test $# -eq 0; then + echo 1>&2 "Try \`$0 --help' for more information" + exit 1 +fi + +run=: +sed_output='s/.* --output[ =]\([^ ]*\).*/\1/p' +sed_minuso='s/.* -o \([^ ]*\).*/\1/p' + +# In the cases where this matters, `missing' is being run in the +# srcdir already. +if test -f configure.ac; then + configure_ac=configure.ac +else + configure_ac=configure.in +fi + +msg="missing on your system" + +case $1 in +--run) + # Try to run requested program, and just exit if it succeeds. + run= + shift + "$@" && exit 0 + # Exit code 63 means version mismatch. This often happens + # when the user try to use an ancient version of a tool on + # a file that requires a minimum version. In this case we + # we should proceed has if the program had been absent, or + # if --run hadn't been passed. + if test $? = 63; then + run=: + msg="probably too old" + fi + ;; + + -h|--h|--he|--hel|--help) + echo "\ +$0 [OPTION]... PROGRAM [ARGUMENT]... + +Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an +error status if there is no known handling for PROGRAM. + +Options: + -h, --help display this help and exit + -v, --version output version information and exit + --run try to run the given command, and emulate it if it fails + +Supported PROGRAM values: + aclocal touch file \`aclocal.m4' + autoconf touch file \`configure' + autoheader touch file \`config.h.in' + autom4te touch the output file, or create a stub one + automake touch all \`Makefile.in' files + bison create \`y.tab.[ch]', if possible, from existing .[ch] + flex create \`lex.yy.c', if possible, from existing .c + help2man touch the output file + lex create \`lex.yy.c', if possible, from existing .c + makeinfo touch the output file + yacc create \`y.tab.[ch]', if possible, from existing .[ch] + +Version suffixes to PROGRAM as well as the prefixes \`gnu-', \`gnu', and +\`g' are ignored when checking the name. + +Send bug reports to ." + exit $? + ;; + + -v|--v|--ve|--ver|--vers|--versi|--versio|--version) + echo "missing $scriptversion (GNU Automake)" + exit $? + ;; + + -*) + echo 1>&2 "$0: Unknown \`$1' option" + echo 1>&2 "Try \`$0 --help' for more information" + exit 1 + ;; + +esac + +# normalize program name to check for. +program=`echo "$1" | sed ' + s/^gnu-//; t + s/^gnu//; t + s/^g//; t'` + +# Now exit if we have it, but it failed. Also exit now if we +# don't have it and --version was passed (most likely to detect +# the program). This is about non-GNU programs, so use $1 not +# $program. +case $1 in + lex*|yacc*) + # Not GNU programs, they don't have --version. + ;; + + *) + if test -z "$run" && ($1 --version) > /dev/null 2>&1; then + # We have it, but it failed. + exit 1 + elif test "x$2" = "x--version" || test "x$2" = "x--help"; then + # Could not run --version or --help. This is probably someone + # running `$TOOL --version' or `$TOOL --help' to check whether + # $TOOL exists and not knowing $TOOL uses missing. + exit 1 + fi + ;; +esac + +# If it does not exist, or fails to run (possibly an outdated version), +# try to emulate it. +case $program in + aclocal*) + echo 1>&2 "\ +WARNING: \`$1' is $msg. You should only need it if + you modified \`acinclude.m4' or \`${configure_ac}'. You might want + to install the \`Automake' and \`Perl' packages. Grab them from + any GNU archive site." + touch aclocal.m4 + ;; + + autoconf*) + echo 1>&2 "\ +WARNING: \`$1' is $msg. You should only need it if + you modified \`${configure_ac}'. You might want to install the + \`Autoconf' and \`GNU m4' packages. Grab them from any GNU + archive site." + touch configure + ;; + + autoheader*) + echo 1>&2 "\ +WARNING: \`$1' is $msg. You should only need it if + you modified \`acconfig.h' or \`${configure_ac}'. You might want + to install the \`Autoconf' and \`GNU m4' packages. Grab them + from any GNU archive site." + files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}` + test -z "$files" && files="config.h" + touch_files= + for f in $files; do + case $f in + *:*) touch_files="$touch_files "`echo "$f" | + sed -e 's/^[^:]*://' -e 's/:.*//'`;; + *) touch_files="$touch_files $f.in";; + esac + done + touch $touch_files + ;; + + automake*) + echo 1>&2 "\ +WARNING: \`$1' is $msg. You should only need it if + you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'. + You might want to install the \`Automake' and \`Perl' packages. + Grab them from any GNU archive site." + find . -type f -name Makefile.am -print | + sed 's/\.am$/.in/' | + while read f; do touch "$f"; done + ;; + + autom4te*) + echo 1>&2 "\ +WARNING: \`$1' is needed, but is $msg. + You might have modified some files without having the + proper tools for further handling them. + You can get \`$1' as part of \`Autoconf' from any GNU + archive site." + + file=`echo "$*" | sed -n "$sed_output"` + test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"` + if test -f "$file"; then + touch $file + else + test -z "$file" || exec >$file + echo "#! /bin/sh" + echo "# Created by GNU Automake missing as a replacement of" + echo "# $ $@" + echo "exit 0" + chmod +x $file + exit 1 + fi + ;; + + bison*|yacc*) + echo 1>&2 "\ +WARNING: \`$1' $msg. You should only need it if + you modified a \`.y' file. You may need the \`Bison' package + in order for those modifications to take effect. You can get + \`Bison' from any GNU archive site." + rm -f y.tab.c y.tab.h + if test $# -ne 1; then + eval LASTARG=\${$#} + case $LASTARG in + *.y) + SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'` + if test -f "$SRCFILE"; then + cp "$SRCFILE" y.tab.c + fi + SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'` + if test -f "$SRCFILE"; then + cp "$SRCFILE" y.tab.h + fi + ;; + esac + fi + if test ! -f y.tab.h; then + echo >y.tab.h + fi + if test ! -f y.tab.c; then + echo 'main() { return 0; }' >y.tab.c + fi + ;; + + lex*|flex*) + echo 1>&2 "\ +WARNING: \`$1' is $msg. You should only need it if + you modified a \`.l' file. You may need the \`Flex' package + in order for those modifications to take effect. You can get + \`Flex' from any GNU archive site." + rm -f lex.yy.c + if test $# -ne 1; then + eval LASTARG=\${$#} + case $LASTARG in + *.l) + SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'` + if test -f "$SRCFILE"; then + cp "$SRCFILE" lex.yy.c + fi + ;; + esac + fi + if test ! -f lex.yy.c; then + echo 'main() { return 0; }' >lex.yy.c + fi + ;; + + help2man*) + echo 1>&2 "\ +WARNING: \`$1' is $msg. You should only need it if + you modified a dependency of a manual page. You may need the + \`Help2man' package in order for those modifications to take + effect. You can get \`Help2man' from any GNU archive site." + + file=`echo "$*" | sed -n "$sed_output"` + test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"` + if test -f "$file"; then + touch $file + else + test -z "$file" || exec >$file + echo ".ab help2man is required to generate this page" + exit $? + fi + ;; + + makeinfo*) + echo 1>&2 "\ +WARNING: \`$1' is $msg. You should only need it if + you modified a \`.texi' or \`.texinfo' file, or any other file + indirectly affecting the aspect of the manual. The spurious + call might also be the consequence of using a buggy \`make' (AIX, + DU, IRIX). You might want to install the \`Texinfo' package or + the \`GNU make' package. Grab either from any GNU archive site." + # The file to touch is that specified with -o ... + file=`echo "$*" | sed -n "$sed_output"` + test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"` + if test -z "$file"; then + # ... or it is the one specified with @setfilename ... + infile=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'` + file=`sed -n ' + /^@setfilename/{ + s/.* \([^ ]*\) *$/\1/ + p + q + }' $infile` + # ... or it is derived from the source name (dir/f.texi becomes f.info) + test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info + fi + # If the file does not exist, the user really needs makeinfo; + # let's fail without touching anything. + test -f $file || exit 1 + touch $file + ;; + + *) + echo 1>&2 "\ +WARNING: \`$1' is needed, and is $msg. + You might have modified some files without having the + proper tools for further handling them. Check the \`README' file, + it often tells you about the needed prerequisites for installing + this package. You may also peek at any GNU archive site, in case + some other package would contain this missing \`$1' program." + exit 1 + ;; +esac + +exit 0 + +# Local variables: +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "scriptversion=" +# time-stamp-format: "%:y-%02m-%02d.%02H" +# time-stamp-time-zone: "UTC" +# time-stamp-end: "; # UTC" +# End: ADDED autoconf/tea/Makefile.in Index: autoconf/tea/Makefile.in ================================================================== --- autoconf/tea/Makefile.in +++ autoconf/tea/Makefile.in @@ -0,0 +1,439 @@ +# Makefile.in -- +# +# This file is a Makefile for Sample TEA Extension. If it has the name +# "Makefile.in" then it is a template for a Makefile; to generate the +# actual Makefile, run "./configure", which is a configuration script +# generated by the "autoconf" program (constructs like "@foo@" will get +# replaced in the actual Makefile. +# +# Copyright (c) 1999 Scriptics Corporation. +# Copyright (c) 2002-2005 ActiveState Corporation. +# +# See the file "license.terms" for information on usage and redistribution +# of this file, and for a DISCLAIMER OF ALL WARRANTIES. +# +# RCS: @(#) $Id: Makefile.in,v 1.59 2005/07/26 19:17:02 mdejong Exp $ + +#======================================================================== +# Add additional lines to handle any additional AC_SUBST cases that +# have been added in a customized configure script. +#======================================================================== + +#SAMPLE_NEW_VAR = @SAMPLE_NEW_VAR@ + +#======================================================================== +# Nothing of the variables below this line should need to be changed. +# Please check the TARGETS section below to make sure the make targets +# are correct. +#======================================================================== + +#======================================================================== +# The names of the source files is defined in the configure script. +# The object files are used for linking into the final library. +# This will be used when a dist target is added to the Makefile. +# It is not important to specify the directory, as long as it is the +# $(srcdir) or in the generic, win or unix subdirectory. +#======================================================================== + +PKG_SOURCES = @PKG_SOURCES@ +PKG_OBJECTS = @PKG_OBJECTS@ + +PKG_STUB_SOURCES = @PKG_STUB_SOURCES@ +PKG_STUB_OBJECTS = @PKG_STUB_OBJECTS@ + +#======================================================================== +# PKG_TCL_SOURCES identifies Tcl runtime files that are associated with +# this package that need to be installed, if any. +#======================================================================== + +PKG_TCL_SOURCES = @PKG_TCL_SOURCES@ + +#======================================================================== +# This is a list of public header files to be installed, if any. +#======================================================================== + +PKG_HEADERS = @PKG_HEADERS@ + +#======================================================================== +# "PKG_LIB_FILE" refers to the library (dynamic or static as per +# configuration options) composed of the named objects. +#======================================================================== + +PKG_LIB_FILE = @PKG_LIB_FILE@ +PKG_STUB_LIB_FILE = @PKG_STUB_LIB_FILE@ + +lib_BINARIES = $(PKG_LIB_FILE) +BINARIES = $(lib_BINARIES) + +SHELL = @SHELL@ + +srcdir = @srcdir@ +prefix = @prefix@ +exec_prefix = @exec_prefix@ + +bindir = @bindir@ +libdir = @libdir@ +datadir = @datadir@ +mandir = @mandir@ +includedir = @includedir@ + +DESTDIR = + +PKG_DIR = $(PACKAGE_NAME)$(PACKAGE_VERSION) +pkgdatadir = $(datadir)/$(PKG_DIR) +pkglibdir = $(libdir)/$(PKG_DIR) +pkgincludedir = $(includedir)/$(PKG_DIR) + +top_builddir = . + +INSTALL = @INSTALL@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_DATA = @INSTALL_DATA@ +INSTALL_SCRIPT = @INSTALL_SCRIPT@ + +PACKAGE_NAME = @PACKAGE_NAME@ +PACKAGE_VERSION = @PACKAGE_VERSION@ +CC = @CC@ +CFLAGS_DEFAULT = @CFLAGS_DEFAULT@ +CFLAGS_WARNING = @CFLAGS_WARNING@ +CLEANFILES = @CLEANFILES@ +EXEEXT = @EXEEXT@ +LDFLAGS_DEFAULT = @LDFLAGS_DEFAULT@ +MAKE_LIB = @MAKE_LIB@ +MAKE_SHARED_LIB = @MAKE_SHARED_LIB@ +MAKE_STATIC_LIB = @MAKE_STATIC_LIB@ +MAKE_STUB_LIB = @MAKE_STUB_LIB@ +OBJEXT = @OBJEXT@ +RANLIB = @RANLIB@ +RANLIB_STUB = @RANLIB_STUB@ +SHLIB_CFLAGS = @SHLIB_CFLAGS@ +SHLIB_LD = @SHLIB_LD@ +SHLIB_LD_LIBS = @SHLIB_LD_LIBS@ +STLIB_LD = @STLIB_LD@ +#TCL_DEFS = @TCL_DEFS@ +TCL_BIN_DIR = @TCL_BIN_DIR@ +TCL_SRC_DIR = @TCL_SRC_DIR@ +#TK_BIN_DIR = @TK_BIN_DIR@ +#TK_SRC_DIR = @TK_SRC_DIR@ + +# This is no longer necessary even for packages that use private Tcl headers +#TCL_TOP_DIR_NATIVE = @TCL_TOP_DIR_NATIVE@ +# Not used, but retained for reference of what libs Tcl required +#TCL_LIBS = @TCL_LIBS@ + +#======================================================================== +# TCLLIBPATH seeds the auto_path in Tcl's init.tcl so we can test our +# package without installing. The other environment variables allow us +# to test against an uninstalled Tcl. Add special env vars that you +# require for testing here (like TCLX_LIBRARY). +#======================================================================== + +EXTRA_PATH = $(top_builddir):$(TCL_BIN_DIR) +#EXTRA_PATH = $(top_builddir):$(TCL_BIN_DIR):$(TK_BIN_DIR) +TCLLIBPATH = $(top_builddir) +TCLSH_ENV = TCL_LIBRARY=`@CYGPATH@ $(TCL_SRC_DIR)/library` \ + @LD_LIBRARY_PATH_VAR@="$(EXTRA_PATH):$(@LD_LIBRARY_PATH_VAR@)" \ + PATH="$(EXTRA_PATH):$(PATH)" \ + TCLLIBPATH="$(TCLLIBPATH)" +# TK_LIBRARY=`@CYGPATH@ $(TK_SRC_DIR)/library` + +TCLSH_PROG = @TCLSH_PROG@ +TCLSH = $(TCLSH_ENV) $(TCLSH_PROG) + +#WISH_PROG = @WISH_PROG@ +#WISH = $(TCLSH_ENV) $(WISH_PROG) + + +SHARED_BUILD = @SHARED_BUILD@ + +INCLUDES = @PKG_INCLUDES@ @TCL_INCLUDES@ -I$(srcdir)/.. +#INCLUDES = @PKG_INCLUDES@ @TCL_INCLUDES@ @TK_INCLUDES@ @TK_XINCLUDES@ + +PKG_CFLAGS = @PKG_CFLAGS@ + +# TCL_DEFS is not strictly need here, but if you remove it, then you +# must make sure that configure.in checks for the necessary components +# that your library may use. TCL_DEFS can actually be a problem if +# you do not compile with a similar machine setup as the Tcl core was +# compiled with. +#DEFS = $(TCL_DEFS) @DEFS@ $(PKG_CFLAGS) +DEFS = @DEFS@ $(PKG_CFLAGS) + +CONFIG_CLEAN_FILES = Makefile pkgIndex.tcl + +CPPFLAGS = @CPPFLAGS@ +LIBS = @PKG_LIBS@ @LIBS@ +AR = @AR@ +CFLAGS = @CFLAGS@ +COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) + +#======================================================================== +# Start of user-definable TARGETS section +#======================================================================== + +#======================================================================== +# TEA TARGETS. Please note that the "libraries:" target refers to platform +# independent files, and the "binaries:" target inclues executable programs and +# platform-dependent libraries. Modify these targets so that they install +# the various pieces of your package. The make and install rules +# for the BINARIES that you specified above have already been done. +#======================================================================== + +all: binaries libraries doc + +#======================================================================== +# The binaries target builds executable programs, Windows .dll's, unix +# shared/static libraries, and any other platform-dependent files. +# The list of targets to build for "binaries:" is specified at the top +# of the Makefile, in the "BINARIES" variable. +#======================================================================== + +binaries: $(BINARIES) + +libraries: + + +#======================================================================== +# Your doc target should differentiate from doc builds (by the developer) +# and doc installs (see install-doc), which just install the docs on the +# end user machine when building from source. +#======================================================================== + +doc: + @echo "If you have documentation to create, place the commands to" + @echo "build the docs in the 'doc:' target. For example:" + @echo " xml2nroff sample.xml > sample.n" + @echo " xml2html sample.xml > sample.html" + +install: all install-binaries install-libraries install-doc + +install-binaries: binaries install-lib-binaries install-bin-binaries + +#======================================================================== +# This rule installs platform-independent files, such as header files. +# The list=...; for p in $$list handles the empty list case x-platform. +#======================================================================== + +install-libraries: libraries + @mkdir -p $(DESTDIR)$(includedir) + @echo "Installing header files in $(DESTDIR)$(includedir)" + @list='$(PKG_HEADERS)'; for i in $$list; do \ + echo "Installing $(srcdir)/$$i" ; \ + $(INSTALL_DATA) $(srcdir)/$$i $(DESTDIR)$(includedir) ; \ + done; + +#======================================================================== +# Install documentation. Unix manpages should go in the $(mandir) +# directory. +#======================================================================== + +install-doc: doc + @mkdir -p $(DESTDIR)$(mandir)/mann + @echo "Installing documentation in $(DESTDIR)$(mandir)" + @list='$(srcdir)/doc/*.n'; for i in $$list; do \ + echo "Installing $$i"; \ + rm -f $(DESTDIR)$(mandir)/mann/`basename $$i`; \ + $(INSTALL_DATA) $$i $(DESTDIR)$(mandir)/mann ; \ + done + +test: binaries libraries + @echo "SQLite TEA distribution does not include tests" + +shell: binaries libraries + @$(TCLSH) $(SCRIPT) + +gdb: + $(TCLSH_ENV) gdb $(TCLSH_PROG) $(SCRIPT) + +depend: + +#======================================================================== +# $(PKG_LIB_FILE) should be listed as part of the BINARIES variable +# mentioned above. That will ensure that this target is built when you +# run "make binaries". +# +# The $(PKG_OBJECTS) objects are created and linked into the final +# library. In most cases these object files will correspond to the +# source files above. +#======================================================================== + +$(PKG_LIB_FILE): $(PKG_OBJECTS) + -rm -f $(PKG_LIB_FILE) + ${MAKE_LIB} + $(RANLIB) $(PKG_LIB_FILE) + +$(PKG_STUB_LIB_FILE): $(PKG_STUB_OBJECTS) + -rm -f $(PKG_STUB_LIB_FILE) + ${MAKE_STUB_LIB} + $(RANLIB_STUB) $(PKG_STUB_LIB_FILE) + +#======================================================================== +# We need to enumerate the list of .c to .o lines here. +# +# In the following lines, $(srcdir) refers to the toplevel directory +# containing your extension. If your sources are in a subdirectory, +# you will have to modify the paths to reflect this: +# +# sample.$(OBJEXT): $(srcdir)/generic/sample.c +# $(COMPILE) -c `@CYGPATH@ $(srcdir)/generic/sample.c` -o $@ +# +# Setting the VPATH variable to a list of paths will cause the makefile +# to look into these paths when resolving .c to .obj dependencies. +# As necessary, add $(srcdir):$(srcdir)/compat:.... +#======================================================================== + +VPATH = $(srcdir):$(srcdir)/generic:$(srcdir)/unix:$(srcdir)/win + +.c.@OBJEXT@: + $(COMPILE) -c `@CYGPATH@ $<` -o $@ + +#======================================================================== +# Distribution creation +# You may need to tweak this target to make it work correctly. +#======================================================================== + +#COMPRESS = tar cvf $(PKG_DIR).tar $(PKG_DIR); compress $(PKG_DIR).tar +COMPRESS = gtar zcvf $(PKG_DIR).tar.gz $(PKG_DIR) +DIST_ROOT = /tmp/dist +DIST_DIR = $(DIST_ROOT)/$(PKG_DIR) + +dist-clean: + rm -rf $(DIST_DIR) $(DIST_ROOT)/$(PKG_DIR).tar.* + +dist: dist-clean + mkdir -p $(DIST_DIR) + cp -p $(srcdir)/README* $(srcdir)/license* \ + $(srcdir)/aclocal.m4 $(srcdir)/configure $(srcdir)/*.in \ + $(DIST_DIR)/ + chmod 664 $(DIST_DIR)/Makefile.in $(DIST_DIR)/aclocal.m4 + chmod 775 $(DIST_DIR)/configure $(DIST_DIR)/configure.in + + for i in $(srcdir)/*.[ch]; do \ + if [ -f $$i ]; then \ + cp -p $$i $(DIST_DIR)/ ; \ + fi; \ + done; + + mkdir $(DIST_DIR)/tclconfig + cp $(srcdir)/tclconfig/install-sh $(srcdir)/tclconfig/tcl.m4 \ + $(DIST_DIR)/tclconfig/ + chmod 664 $(DIST_DIR)/tclconfig/tcl.m4 + chmod +x $(DIST_DIR)/tclconfig/install-sh + + list='demos doc generic library mac tests unix win'; \ + for p in $$list; do \ + if test -d $(srcdir)/$$p ; then \ + mkdir $(DIST_DIR)/$$p; \ + cp -p $(srcdir)/$$p/*.* $(DIST_DIR)/$$p/; \ + fi; \ + done + + (cd $(DIST_ROOT); $(COMPRESS);) + +#======================================================================== +# End of user-definable section +#======================================================================== + +#======================================================================== +# Don't modify the file to clean here. Instead, set the "CLEANFILES" +# variable in configure.in +#======================================================================== + +clean: + -test -z "$(BINARIES)" || rm -f $(BINARIES) + -rm -f *.$(OBJEXT) core *.core + -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES) + +distclean: clean + -rm -f *.tab.c + -rm -f $(CONFIG_CLEAN_FILES) + -rm -f config.cache config.log config.status + +#======================================================================== +# Install binary object libraries. On Windows this includes both .dll and +# .lib files. Because the .lib files are not explicitly listed anywhere, +# we need to deduce their existence from the .dll file of the same name. +# Library files go into the lib directory. +# In addition, this will generate the pkgIndex.tcl +# file in the install location (assuming it can find a usable tclsh shell) +# +# You should not have to modify this target. +#======================================================================== + +install-lib-binaries: binaries + @mkdir -p $(DESTDIR)$(pkglibdir) + @list='$(lib_BINARIES)'; for p in $$list; do \ + if test -f $$p; then \ + echo " $(INSTALL_PROGRAM) $$p $(DESTDIR)$(pkglibdir)/$$p"; \ + $(INSTALL_PROGRAM) $$p $(DESTDIR)$(pkglibdir)/$$p; \ + stub=`echo $$p|sed -e "s/.*\(stub\).*/\1/"`; \ + if test "x$$stub" = "xstub"; then \ + echo " $(RANLIB_STUB) $(DESTDIR)$(pkglibdir)/$$p"; \ + $(RANLIB_STUB) $(DESTDIR)$(pkglibdir)/$$p; \ + else \ + echo " $(RANLIB) $(DESTDIR)$(pkglibdir)/$$p"; \ + $(RANLIB) $(DESTDIR)$(pkglibdir)/$$p; \ + fi; \ + ext=`echo $$p|sed -e "s/.*\.//"`; \ + if test "x$$ext" = "xdll"; then \ + lib=`basename $$p|sed -e 's/.[^.]*$$//'`.lib; \ + if test -f $$lib; then \ + echo " $(INSTALL_DATA) $$lib $(DESTDIR)$(pkglibdir)/$$lib"; \ + $(INSTALL_DATA) $$lib $(DESTDIR)$(pkglibdir)/$$lib; \ + fi; \ + fi; \ + fi; \ + done + @list='$(PKG_TCL_SOURCES)'; for p in $$list; do \ + if test -f $(srcdir)/$$p; then \ + destp=`basename $$p`; \ + echo " Install $$destp $(DESTDIR)$(pkglibdir)/$$destp"; \ + $(INSTALL_DATA) $(srcdir)/$$p $(DESTDIR)$(pkglibdir)/$$destp; \ + fi; \ + done + @if test "x$(SHARED_BUILD)" = "x1"; then \ + echo " Install pkgIndex.tcl $(DESTDIR)$(pkglibdir)"; \ + $(INSTALL_DATA) pkgIndex.tcl $(DESTDIR)$(pkglibdir); \ + fi + +#======================================================================== +# Install binary executables (e.g. .exe files and dependent .dll files) +# This is for files that must go in the bin directory (located next to +# wish and tclsh), like dependent .dll files on Windows. +# +# You should not have to modify this target, except to define bin_BINARIES +# above if necessary. +#======================================================================== + +install-bin-binaries: binaries + @mkdir -p $(DESTDIR)$(bindir) + @list='$(bin_BINARIES)'; for p in $$list; do \ + if test -f $$p; then \ + echo " $(INSTALL_PROGRAM) $$p $(DESTDIR)$(bindir)/$$p"; \ + $(INSTALL_PROGRAM) $$p $(DESTDIR)$(bindir)/$$p; \ + fi; \ + done + +.SUFFIXES: .c .$(OBJEXT) + +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + cd $(top_builddir) \ + && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status + +uninstall-binaries: + list='$(lib_BINARIES)'; for p in $$list; do \ + rm -f $(DESTDIR)$(pkglibdir)/$$p; \ + done + list='$(PKG_TCL_SOURCES)'; for p in $$list; do \ + p=`basename $$p`; \ + rm -f $(DESTDIR)$(pkglibdir)/$$p; \ + done + list='$(bin_BINARIES)'; for p in $$list; do \ + rm -f $(DESTDIR)$(bindir)/$$p; \ + done + +.PHONY: all binaries clean depend distclean doc install libraries test + +# Tell versions [3.59,3.63) of GNU make to not export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: ADDED autoconf/tea/README Index: autoconf/tea/README ================================================================== --- autoconf/tea/README +++ autoconf/tea/README @@ -0,0 +1,36 @@ +This is the SQLite extension for Tcl using the Tcl Extension +Architecture (TEA). For additional information on SQLite see + + http://www.sqlite.org/ + + +UNIX BUILD +========== + +Building under most UNIX systems is easy, just run the configure script +and then run make. For more information about the build process, see +the tcl/unix/README file in the Tcl src dist. The following minimal +example will install the extension in the /opt/tcl directory. + + $ cd sqlite-*-tea + $ ./configure --prefix=/opt/tcl + $ make + $ make install + +WINDOWS BUILD +============= + +The recommended method to build extensions under windows is to use the +Msys + Mingw build process. This provides a Unix-style build while +generating native Windows binaries. Using the Msys + Mingw build tools +means that you can use the same configure script as per the Unix build +to create a Makefile. See the tcl/win/README file for the URL of +the Msys + Mingw download. + +If you have VC++ then you may wish to use the files in the win +subdirectory and build the extension using just VC++. These files have +been designed to be as generic as possible but will require some +additional maintenance by the project developer to synchronise with +the TEA configure.in and Makefile.in files. Instructions for using the +VC++ makefile are written in the first part of the Makefile.vc +file. ADDED autoconf/tea/aclocal.m4 Index: autoconf/tea/aclocal.m4 ================================================================== --- autoconf/tea/aclocal.m4 +++ autoconf/tea/aclocal.m4 @@ -0,0 +1,9 @@ +# +# Include the TEA standard macro set +# + +builtin(include,tclconfig/tcl.m4) + +# +# Add here whatever m4 macros you want to define for your package +# ADDED autoconf/tea/configure.in Index: autoconf/tea/configure.in ================================================================== --- autoconf/tea/configure.in +++ autoconf/tea/configure.in @@ -0,0 +1,200 @@ +#!/bin/bash -norc +dnl This file is an input file used by the GNU "autoconf" program to +dnl generate the file "configure", which is run during Tcl installation +dnl to configure the system for the local environment. +# +# RCS: @(#) $Id: configure.in,v 1.43 2005/07/26 19:17:05 mdejong Exp $ + +#----------------------------------------------------------------------- +# Sample configure.in for Tcl Extensions. The only places you should +# need to modify this file are marked by the string __CHANGE__ +#----------------------------------------------------------------------- + +#----------------------------------------------------------------------- +# __CHANGE__ +# Set your package name and version numbers here. +# +# This initializes the environment with PACKAGE_NAME and PACKAGE_VERSION +# set as provided. These will also be added as -D defs in your Makefile +# so you can encode the package version directly into the source files. +#----------------------------------------------------------------------- + +AC_INIT([sqlite], [3.7.4]) + +#-------------------------------------------------------------------- +# Call TEA_INIT as the first TEA_ macro to set up initial vars. +# This will define a ${TEA_PLATFORM} variable == "unix" or "windows" +# as well as PKG_LIB_FILE and PKG_STUB_LIB_FILE. +#-------------------------------------------------------------------- + +TEA_INIT([3.9]) + +AC_CONFIG_AUX_DIR(tclconfig) + +#-------------------------------------------------------------------- +# Load the tclConfig.sh file +#-------------------------------------------------------------------- + +TEA_PATH_TCLCONFIG +TEA_LOAD_TCLCONFIG + +#-------------------------------------------------------------------- +# Load the tkConfig.sh file if necessary (Tk extension) +#-------------------------------------------------------------------- + +#TEA_PATH_TKCONFIG +#TEA_LOAD_TKCONFIG + +#----------------------------------------------------------------------- +# Handle the --prefix=... option by defaulting to what Tcl gave. +# Must be called after TEA_LOAD_TCLCONFIG and before TEA_SETUP_COMPILER. +#----------------------------------------------------------------------- + +TEA_PREFIX + +#----------------------------------------------------------------------- +# Standard compiler checks. +# This sets up CC by using the CC env var, or looks for gcc otherwise. +# This also calls AC_PROG_CC, AC_PROG_INSTALL and a few others to create +# the basic setup necessary to compile executables. +#----------------------------------------------------------------------- + +TEA_SETUP_COMPILER + +#----------------------------------------------------------------------- +# __CHANGE__ +# Specify the C source files to compile in TEA_ADD_SOURCES, +# public headers that need to be installed in TEA_ADD_HEADERS, +# stub library C source files to compile in TEA_ADD_STUB_SOURCES, +# and runtime Tcl library files in TEA_ADD_TCL_SOURCES. +# This defines PKG(_STUB)_SOURCES, PKG(_STUB)_OBJECTS, PKG_HEADERS +# and PKG_TCL_SOURCES. +#----------------------------------------------------------------------- + +TEA_ADD_SOURCES([tclsqlite3.c]) +TEA_ADD_HEADERS([]) +TEA_ADD_INCLUDES([-I\"`\${CYGPATH} \${srcdir}/generic`\"]) +TEA_ADD_LIBS([]) +TEA_ADD_CFLAGS([-DSQLITE_ENABLE_FTS3=1]) +TEA_ADD_CFLAGS([-DSQLITE_3_SUFFIX_ONLY=1]) +TEA_ADD_CFLAGS([-DSQLITE_ENABLE_RTREE=1]) +TEA_ADD_CFLAGS([-DSQLITE_OMIT_DEPRECATED=1]) +TEA_ADD_STUB_SOURCES([]) +TEA_ADD_TCL_SOURCES([]) + +#-------------------------------------------------------------------- +# The --with-system-sqlite causes the TCL bindings to SQLite to use +# the system shared library for SQLite rather than statically linking +# against its own private copy. This is dangerous and leads to +# undersirable dependences and is not recommended. +# Patchs from rmax. +#-------------------------------------------------------------------- +AC_ARG_WITH([system-sqlite], + [AC_HELP_STRING([--with-system-sqlite], + [use a system-supplied libsqlite3 instead of the bundled one])], + [], [with_system_sqlite=no]) +if test x$with_system_sqlite != xno; then + AC_CHECK_HEADER([sqlite3.h], + [AC_CHECK_LIB([sqlite3],[sqlite3_initialize], + [AC_DEFINE(USE_SYSTEM_SQLITE) + LIBS="$LIBS -lsqlite3"])]) +fi + +#-------------------------------------------------------------------- +# __CHANGE__ +# Choose which headers you need. Extension authors should try very +# hard to only rely on the Tcl public header files. Internal headers +# contain private data structures and are subject to change without +# notice. +# This MUST be called after TEA_LOAD_TCLCONFIG / TEA_LOAD_TKCONFIG +#-------------------------------------------------------------------- + +TEA_PUBLIC_TCL_HEADERS +#TEA_PRIVATE_TCL_HEADERS + +#TEA_PUBLIC_TK_HEADERS +#TEA_PRIVATE_TK_HEADERS +#TEA_PATH_X + +#-------------------------------------------------------------------- +# Check whether --enable-threads or --disable-threads was given. +# This auto-enables if Tcl was compiled threaded. +#-------------------------------------------------------------------- + +TEA_ENABLE_THREADS +if test "${TCL_THREADS}" = "1" ; then + AC_DEFINE(SQLITE_THREADSAFE, 1, [Trigger sqlite threadsafe build]) + # Not automatically added by Tcl because its assumed Tcl links to them, + # but it may not if it isn't really a threaded build. + TEA_ADD_LIBS([$THREADS_LIBS]) +else + AC_DEFINE(SQLITE_THREADSAFE, 0, [Trigger sqlite non-threadsafe build]) +fi + +#-------------------------------------------------------------------- +# The statement below defines a collection of symbols related to +# building as a shared library instead of a static library. +#-------------------------------------------------------------------- + +TEA_ENABLE_SHARED + +#-------------------------------------------------------------------- +# This macro figures out what flags to use with the compiler/linker +# when building shared/static debug/optimized objects. This information +# can be taken from the tclConfig.sh file, but this figures it all out. +#-------------------------------------------------------------------- + +TEA_CONFIG_CFLAGS + +#-------------------------------------------------------------------- +# Set the default compiler switches based on the --enable-symbols option. +#-------------------------------------------------------------------- + +TEA_ENABLE_SYMBOLS + +#-------------------------------------------------------------------- +# Everyone should be linking against the Tcl stub library. If you +# can't for some reason, remove this definition. If you aren't using +# stubs, you also need to modify the SHLIB_LD_LIBS setting below to +# link against the non-stubbed Tcl library. Add Tk too if necessary. +#-------------------------------------------------------------------- + +AC_DEFINE(USE_TCL_STUBS, 1, [Use Tcl stubs]) +#AC_DEFINE(USE_TK_STUBS, 1, [Use Tk stubs]) + + +#-------------------------------------------------------------------- +# Redefine fdatasync as fsync on systems that lack fdatasync +#-------------------------------------------------------------------- + +AC_CHECK_FUNC(fdatasync, , AC_DEFINE(fdatasync, fsync)) + +AC_FUNC_STRERROR_R + + +#-------------------------------------------------------------------- +# This macro generates a line to use when building a library. It +# depends on values set by the TEA_ENABLE_SHARED, TEA_ENABLE_SYMBOLS, +# and TEA_LOAD_TCLCONFIG macros above. +#-------------------------------------------------------------------- + +TEA_MAKE_LIB + +#-------------------------------------------------------------------- +# Determine the name of the tclsh and/or wish executables in the +# Tcl and Tk build directories or the location they were installed +# into. These paths are used to support running test cases only, +# the Makefile should not be making use of these paths to generate +# a pkgIndex.tcl file or anything else at extension build time. +#-------------------------------------------------------------------- + +TEA_PROG_TCLSH +#TEA_PROG_WISH + +#-------------------------------------------------------------------- +# Finally, substitute all of the various values into the Makefile. +# You may alternatively have a special pkgIndex.tcl.in or other files +# which require substituting th AC variables in. Include these here. +#-------------------------------------------------------------------- + +AC_OUTPUT([Makefile pkgIndex.tcl]) ADDED autoconf/tea/doc/sqlite3.n Index: autoconf/tea/doc/sqlite3.n ================================================================== --- autoconf/tea/doc/sqlite3.n +++ autoconf/tea/doc/sqlite3.n @@ -0,0 +1,15 @@ +.TH sqlite3 n 4.1 "Tcl-Extensions" +.HS sqlite3 tcl +.BS +.SH NAME +sqlite3 \- an interface to the SQLite3 database engine +.SH SYNOPSIS +\fBsqlite3\fI command_name ?filename?\fR +.br +.SH DESCRIPTION +SQLite3 is a self-contains, zero-configuration, transactional SQL database +engine. This extension provides an easy to use interface for accessing +SQLite database files from Tcl. +.PP +For full documentation see \fIhttp://www.sqlite.org/\fR and +in particular \fIhttp://www.sqlite.org/tclsqlite.html\fR. ADDED autoconf/tea/license.terms Index: autoconf/tea/license.terms ================================================================== --- autoconf/tea/license.terms +++ autoconf/tea/license.terms @@ -0,0 +1,6 @@ +The author disclaims copyright to this source code. In place of +a legal notice, here is a blessing: + + May you do good and not evil. + May you find forgiveness for yourself and forgive others. + May you share freely, never taking more than you give. ADDED autoconf/tea/pkgIndex.tcl.in Index: autoconf/tea/pkgIndex.tcl.in ================================================================== --- autoconf/tea/pkgIndex.tcl.in +++ autoconf/tea/pkgIndex.tcl.in @@ -0,0 +1,7 @@ +# +# Tcl package index file +# +# Note sqlite*3* init specifically +# +package ifneeded sqlite3 @PACKAGE_VERSION@ \ + [list load [file join $dir @PKG_LIB_FILE@] Sqlite3] ADDED autoconf/tea/tclconfig/install-sh Index: autoconf/tea/tclconfig/install-sh ================================================================== --- autoconf/tea/tclconfig/install-sh +++ autoconf/tea/tclconfig/install-sh @@ -0,0 +1,528 @@ +#!/bin/sh +# install - install a program, script, or datafile + +scriptversion=2011-04-20.01; # UTC + +# This originates from X11R5 (mit/util/scripts/install.sh), which was +# later released in X11R6 (xc/config/util/install.sh) with the +# following copyright and license. +# +# Copyright (C) 1994 X Consortium +# +# Permission is hereby granted, free of charge, to any person obtaining a copy +# of this software and associated documentation files (the "Software"), to +# deal in the Software without restriction, including without limitation the +# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or +# sell copies of the Software, and to permit persons to whom the Software is +# furnished to do so, subject to the following conditions: +# +# The above copyright notice and this permission notice shall be included in +# all copies or substantial portions of the Software. +# +# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE +# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN +# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC- +# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. +# +# Except as contained in this notice, the name of the X Consortium shall not +# be used in advertising or otherwise to promote the sale, use or other deal- +# ings in this Software without prior written authorization from the X Consor- +# tium. +# +# +# FSF changes to this file are in the public domain. +# +# Calling this script install-sh is preferred over install.sh, to prevent +# `make' implicit rules from creating a file called install from it +# when there is no Makefile. +# +# This script is compatible with the BSD install script, but was written +# from scratch. + +nl=' +' +IFS=" "" $nl" + +# set DOITPROG to echo to test this script + +# Don't use :- since 4.3BSD and earlier shells don't like it. +doit=${DOITPROG-} +if test -z "$doit"; then + doit_exec=exec +else + doit_exec=$doit +fi + +# Put in absolute file names if you don't have them in your path; +# or use environment vars. + +chgrpprog=${CHGRPPROG-chgrp} +chmodprog=${CHMODPROG-chmod} +chownprog=${CHOWNPROG-chown} +cmpprog=${CMPPROG-cmp} +cpprog=${CPPROG-cp} +mkdirprog=${MKDIRPROG-mkdir} +mvprog=${MVPROG-mv} +rmprog=${RMPROG-rm} +stripprog=${STRIPPROG-strip} + +posix_glob='?' +initialize_posix_glob=' + test "$posix_glob" != "?" || { + if (set -f) 2>/dev/null; then + posix_glob= + else + posix_glob=: + fi + } +' + +posix_mkdir= + +# Desired mode of installed file. +mode=0755 + +chgrpcmd= +chmodcmd=$chmodprog +chowncmd= +mvcmd=$mvprog +rmcmd="$rmprog -f" +stripcmd= + +src= +dst= +dir_arg= +dst_arg= + +copy_on_change=false +no_target_directory= + +usage="\ +Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE + or: $0 [OPTION]... SRCFILES... DIRECTORY + or: $0 [OPTION]... -t DIRECTORY SRCFILES... + or: $0 [OPTION]... -d DIRECTORIES... + +In the 1st form, copy SRCFILE to DSTFILE. +In the 2nd and 3rd, copy all SRCFILES to DIRECTORY. +In the 4th, create DIRECTORIES. + +Options: + --help display this help and exit. + --version display version info and exit. + + -c (ignored) + -C install only if different (preserve the last data modification time) + -d create directories instead of installing files. + -g GROUP $chgrpprog installed files to GROUP. + -m MODE $chmodprog installed files to MODE. + -o USER $chownprog installed files to USER. + -s $stripprog installed files. + -S $stripprog installed files. + -t DIRECTORY install into DIRECTORY. + -T report an error if DSTFILE is a directory. + +Environment variables override the default commands: + CHGRPPROG CHMODPROG CHOWNPROG CMPPROG CPPROG MKDIRPROG MVPROG + RMPROG STRIPPROG +" + +while test $# -ne 0; do + case $1 in + -c) ;; + + -C) copy_on_change=true;; + + -d) dir_arg=true;; + + -g) chgrpcmd="$chgrpprog $2" + shift;; + + --help) echo "$usage"; exit $?;; + + -m) mode=$2 + case $mode in + *' '* | *' '* | *' +'* | *'*'* | *'?'* | *'['*) + echo "$0: invalid mode: $mode" >&2 + exit 1;; + esac + shift;; + + -o) chowncmd="$chownprog $2" + shift;; + + -s) stripcmd=$stripprog;; + + -S) stripcmd="$stripprog $2" + shift;; + + -t) dst_arg=$2 + shift;; + + -T) no_target_directory=true;; + + --version) echo "$0 $scriptversion"; exit $?;; + + --) shift + break;; + + -*) echo "$0: invalid option: $1" >&2 + exit 1;; + + *) break;; + esac + shift +done + +if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then + # When -d is used, all remaining arguments are directories to create. + # When -t is used, the destination is already specified. + # Otherwise, the last argument is the destination. Remove it from $@. + for arg + do + if test -n "$dst_arg"; then + # $@ is not empty: it contains at least $arg. + set fnord "$@" "$dst_arg" + shift # fnord + fi + shift # arg + dst_arg=$arg + done +fi + +if test $# -eq 0; then + if test -z "$dir_arg"; then + echo "$0: no input file specified." >&2 + exit 1 + fi + # It's OK to call `install-sh -d' without argument. + # This can happen when creating conditional directories. + exit 0 +fi + +if test -z "$dir_arg"; then + do_exit='(exit $ret); exit $ret' + trap "ret=129; $do_exit" 1 + trap "ret=130; $do_exit" 2 + trap "ret=141; $do_exit" 13 + trap "ret=143; $do_exit" 15 + + # Set umask so as not to create temps with too-generous modes. + # However, 'strip' requires both read and write access to temps. + case $mode in + # Optimize common cases. + *644) cp_umask=133;; + *755) cp_umask=22;; + + *[0-7]) + if test -z "$stripcmd"; then + u_plus_rw= + else + u_plus_rw='% 200' + fi + cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;; + *) + if test -z "$stripcmd"; then + u_plus_rw= + else + u_plus_rw=,u+rw + fi + cp_umask=$mode$u_plus_rw;; + esac +fi + +for src +do + # Protect names starting with `-'. + case $src in + -*) src=./$src;; + esac + + if test -n "$dir_arg"; then + dst=$src + dstdir=$dst + test -d "$dstdir" + dstdir_status=$? + else + + # Waiting for this to be detected by the "$cpprog $src $dsttmp" command + # might cause directories to be created, which would be especially bad + # if $src (and thus $dsttmp) contains '*'. + if test ! -f "$src" && test ! -d "$src"; then + echo "$0: $src does not exist." >&2 + exit 1 + fi + + if test -z "$dst_arg"; then + echo "$0: no destination specified." >&2 + exit 1 + fi + + dst=$dst_arg + # Protect names starting with `-'. + case $dst in + -*) dst=./$dst;; + esac + + # If destination is a directory, append the input filename; won't work + # if double slashes aren't ignored. + if test -d "$dst"; then + if test -n "$no_target_directory"; then + echo "$0: $dst_arg: Is a directory" >&2 + exit 1 + fi + dstdir=$dst + dst=$dstdir/`basename "$src"` + dstdir_status=0 + else + # Prefer dirname, but fall back on a substitute if dirname fails. + dstdir=` + (dirname "$dst") 2>/dev/null || + expr X"$dst" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$dst" : 'X\(//\)[^/]' \| \ + X"$dst" : 'X\(//\)$' \| \ + X"$dst" : 'X\(/\)' \| . 2>/dev/null || + echo X"$dst" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q' + ` + + test -d "$dstdir" + dstdir_status=$? + fi + fi + + obsolete_mkdir_used=false + + if test $dstdir_status != 0; then + case $posix_mkdir in + '') + # Create intermediate dirs using mode 755 as modified by the umask. + # This is like FreeBSD 'install' as of 1997-10-28. + umask=`umask` + case $stripcmd.$umask in + # Optimize common cases. + *[2367][2367]) mkdir_umask=$umask;; + .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;; + + *[0-7]) + mkdir_umask=`expr $umask + 22 \ + - $umask % 100 % 40 + $umask % 20 \ + - $umask % 10 % 4 + $umask % 2 + `;; + *) mkdir_umask=$umask,go-w;; + esac + + # With -d, create the new directory with the user-specified mode. + # Otherwise, rely on $mkdir_umask. + if test -n "$dir_arg"; then + mkdir_mode=-m$mode + else + mkdir_mode= + fi + + posix_mkdir=false + case $umask in + *[123567][0-7][0-7]) + # POSIX mkdir -p sets u+wx bits regardless of umask, which + # is incompatible with FreeBSD 'install' when (umask & 300) != 0. + ;; + *) + tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$ + trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0 + + if (umask $mkdir_umask && + exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1 + then + if test -z "$dir_arg" || { + # Check for POSIX incompatibilities with -m. + # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or + # other-writeable bit of parent directory when it shouldn't. + # FreeBSD 6.1 mkdir -m -p sets mode of existing directory. + ls_ld_tmpdir=`ls -ld "$tmpdir"` + case $ls_ld_tmpdir in + d????-?r-*) different_mode=700;; + d????-?--*) different_mode=755;; + *) false;; + esac && + $mkdirprog -m$different_mode -p -- "$tmpdir" && { + ls_ld_tmpdir_1=`ls -ld "$tmpdir"` + test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1" + } + } + then posix_mkdir=: + fi + rmdir "$tmpdir/d" "$tmpdir" + else + # Remove any dirs left behind by ancient mkdir implementations. + rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null + fi + trap '' 0;; + esac;; + esac + + if + $posix_mkdir && ( + umask $mkdir_umask && + $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir" + ) + then : + else + + # The umask is ridiculous, or mkdir does not conform to POSIX, + # or it failed possibly due to a race condition. Create the + # directory the slow way, step by step, checking for races as we go. + + case $dstdir in + /*) prefix='/';; + -*) prefix='./';; + *) prefix='';; + esac + + eval "$initialize_posix_glob" + + oIFS=$IFS + IFS=/ + $posix_glob set -f + set fnord $dstdir + shift + $posix_glob set +f + IFS=$oIFS + + prefixes= + + for d + do + test -z "$d" && continue + + prefix=$prefix$d + if test -d "$prefix"; then + prefixes= + else + if $posix_mkdir; then + (umask=$mkdir_umask && + $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break + # Don't fail if two instances are running concurrently. + test -d "$prefix" || exit 1 + else + case $prefix in + *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;; + *) qprefix=$prefix;; + esac + prefixes="$prefixes '$qprefix'" + fi + fi + prefix=$prefix/ + done + + if test -n "$prefixes"; then + # Don't fail if two instances are running concurrently. + (umask $mkdir_umask && + eval "\$doit_exec \$mkdirprog $prefixes") || + test -d "$dstdir" || exit 1 + obsolete_mkdir_used=true + fi + fi + fi + + if test -n "$dir_arg"; then + { test -z "$chowncmd" || $doit $chowncmd "$dst"; } && + { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } && + { test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false || + test -z "$chmodcmd" || $doit $chmodcmd $mode "$dst"; } || exit 1 + else + + # Make a couple of temp file names in the proper directory. + dsttmp=$dstdir/_inst.$$_ + rmtmp=$dstdir/_rm.$$_ + + # Trap to clean up those temp files at exit. + trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0 + + # Copy the file name to the temp name. + (umask $cp_umask && $doit_exec $cpprog "$src" "$dsttmp") && + + # and set any options; do chmod last to preserve setuid bits. + # + # If any of these fail, we abort the whole thing. If we want to + # ignore errors from any of these, just make sure not to ignore + # errors from the above "$doit $cpprog $src $dsttmp" command. + # + { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } && + { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } && + { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } && + { test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } && + + # If -C, don't bother to copy if it wouldn't change the file. + if $copy_on_change && + old=`LC_ALL=C ls -dlL "$dst" 2>/dev/null` && + new=`LC_ALL=C ls -dlL "$dsttmp" 2>/dev/null` && + + eval "$initialize_posix_glob" && + $posix_glob set -f && + set X $old && old=:$2:$4:$5:$6 && + set X $new && new=:$2:$4:$5:$6 && + $posix_glob set +f && + + test "$old" = "$new" && + $cmpprog "$dst" "$dsttmp" >/dev/null 2>&1 + then + rm -f "$dsttmp" + else + # Rename the file to the real destination. + $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null || + + # The rename failed, perhaps because mv can't rename something else + # to itself, or perhaps because mv is so ancient that it does not + # support -f. + { + # Now remove or move aside any old file at destination location. + # We try this two ways since rm can't unlink itself on some + # systems and the destination file might be busy for other + # reasons. In this case, the final cleanup might fail but the new + # file should still install successfully. + { + test ! -f "$dst" || + $doit $rmcmd -f "$dst" 2>/dev/null || + { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null && + { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; } + } || + { echo "$0: cannot unlink or rename $dst" >&2 + (exit 1); exit 1 + } + } && + + # Now rename the file to the real destination. + $doit $mvcmd "$dsttmp" "$dst" + } + fi || exit 1 + + trap '' 0 + fi +done + +# Local variables: +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "scriptversion=" +# time-stamp-format: "%:y-%02m-%02d.%02H" +# time-stamp-time-zone: "UTC" +# time-stamp-end: "; # UTC" +# End: ADDED autoconf/tea/tclconfig/tcl.m4 Index: autoconf/tea/tclconfig/tcl.m4 ================================================================== --- autoconf/tea/tclconfig/tcl.m4 +++ autoconf/tea/tclconfig/tcl.m4 @@ -0,0 +1,4165 @@ +# tcl.m4 -- +# +# This file provides a set of autoconf macros to help TEA-enable +# a Tcl extension. +# +# Copyright (c) 1999-2000 Ajuba Solutions. +# Copyright (c) 2002-2005 ActiveState Corporation. +# +# See the file "license.terms" for information on usage and redistribution +# of this file, and for a DISCLAIMER OF ALL WARRANTIES. + +AC_PREREQ(2.57) + +dnl TEA extensions pass us the version of TEA they think they +dnl are compatible with (must be set in TEA_INIT below) +dnl TEA_VERSION="3.9" + +# Possible values for key variables defined: +# +# TEA_WINDOWINGSYSTEM - win32 aqua x11 (mirrors 'tk windowingsystem') +# TEA_PLATFORM - windows unix +# + +#------------------------------------------------------------------------ +# TEA_PATH_TCLCONFIG -- +# +# Locate the tclConfig.sh file and perform a sanity check on +# the Tcl compile flags +# +# Arguments: +# none +# +# Results: +# +# Adds the following arguments to configure: +# --with-tcl=... +# +# Defines the following vars: +# TCL_BIN_DIR Full path to the directory containing +# the tclConfig.sh file +#------------------------------------------------------------------------ + +AC_DEFUN([TEA_PATH_TCLCONFIG], [ + dnl TEA specific: Make sure we are initialized + AC_REQUIRE([TEA_INIT]) + # + # Ok, lets find the tcl configuration + # First, look for one uninstalled. + # the alternative search directory is invoked by --with-tcl + # + + if test x"${no_tcl}" = x ; then + # we reset no_tcl in case something fails here + no_tcl=true + AC_ARG_WITH(tcl, + AC_HELP_STRING([--with-tcl], + [directory containing tcl configuration (tclConfig.sh)]), + with_tclconfig="${withval}") + AC_MSG_CHECKING([for Tcl configuration]) + AC_CACHE_VAL(ac_cv_c_tclconfig,[ + + # First check to see if --with-tcl was specified. + if test x"${with_tclconfig}" != x ; then + case "${with_tclconfig}" in + */tclConfig.sh ) + if test -f "${with_tclconfig}"; then + AC_MSG_WARN([--with-tcl argument should refer to directory containing tclConfig.sh, not to tclConfig.sh itself]) + with_tclconfig="`echo "${with_tclconfig}" | sed 's!/tclConfig\.sh$!!'`" + fi ;; + esac + if test -f "${with_tclconfig}/tclConfig.sh" ; then + ac_cv_c_tclconfig="`(cd "${with_tclconfig}"; pwd)`" + else + AC_MSG_ERROR([${with_tclconfig} directory doesn't contain tclConfig.sh]) + fi + fi + + # then check for a private Tcl installation + if test x"${ac_cv_c_tclconfig}" = x ; then + for i in \ + ../tcl \ + `ls -dr ../tcl[[8-9]].[[0-9]].[[0-9]]* 2>/dev/null` \ + `ls -dr ../tcl[[8-9]].[[0-9]] 2>/dev/null` \ + `ls -dr ../tcl[[8-9]].[[0-9]]* 2>/dev/null` \ + ../../tcl \ + `ls -dr ../../tcl[[8-9]].[[0-9]].[[0-9]]* 2>/dev/null` \ + `ls -dr ../../tcl[[8-9]].[[0-9]] 2>/dev/null` \ + `ls -dr ../../tcl[[8-9]].[[0-9]]* 2>/dev/null` \ + ../../../tcl \ + `ls -dr ../../../tcl[[8-9]].[[0-9]].[[0-9]]* 2>/dev/null` \ + `ls -dr ../../../tcl[[8-9]].[[0-9]] 2>/dev/null` \ + `ls -dr ../../../tcl[[8-9]].[[0-9]]* 2>/dev/null` ; do + if test "${TEA_PLATFORM}" = "windows" \ + -a -f "$i/win/tclConfig.sh" ; then + ac_cv_c_tclconfig="`(cd $i/win; pwd)`" + break + fi + if test -f "$i/unix/tclConfig.sh" ; then + ac_cv_c_tclconfig="`(cd $i/unix; pwd)`" + break + fi + done + fi + + # on Darwin, check in Framework installation locations + if test "`uname -s`" = "Darwin" -a x"${ac_cv_c_tclconfig}" = x ; then + for i in `ls -d ~/Library/Frameworks 2>/dev/null` \ + `ls -d /Library/Frameworks 2>/dev/null` \ + `ls -d /Network/Library/Frameworks 2>/dev/null` \ + `ls -d /System/Library/Frameworks 2>/dev/null` \ + ; do + if test -f "$i/Tcl.framework/tclConfig.sh" ; then + ac_cv_c_tclconfig="`(cd $i/Tcl.framework; pwd)`" + break + fi + done + fi + + # TEA specific: on Windows, check in common installation locations + if test "${TEA_PLATFORM}" = "windows" \ + -a x"${ac_cv_c_tclconfig}" = x ; then + for i in `ls -d C:/Tcl/lib 2>/dev/null` \ + `ls -d C:/Progra~1/Tcl/lib 2>/dev/null` \ + ; do + if test -f "$i/tclConfig.sh" ; then + ac_cv_c_tclconfig="`(cd $i; pwd)`" + break + fi + done + fi + + # check in a few common install locations + if test x"${ac_cv_c_tclconfig}" = x ; then + for i in `ls -d ${libdir} 2>/dev/null` \ + `ls -d ${exec_prefix}/lib 2>/dev/null` \ + `ls -d ${prefix}/lib 2>/dev/null` \ + `ls -d /usr/local/lib 2>/dev/null` \ + `ls -d /usr/contrib/lib 2>/dev/null` \ + `ls -d /usr/lib 2>/dev/null` \ + `ls -d /usr/lib64 2>/dev/null` \ + `ls -d /usr/lib/tcl8.6 2>/dev/null` \ + `ls -d /usr/lib/tcl8.5 2>/dev/null` \ + ; do + if test -f "$i/tclConfig.sh" ; then + ac_cv_c_tclconfig="`(cd $i; pwd)`" + break + fi + done + fi + + # check in a few other private locations + if test x"${ac_cv_c_tclconfig}" = x ; then + for i in \ + ${srcdir}/../tcl \ + `ls -dr ${srcdir}/../tcl[[8-9]].[[0-9]].[[0-9]]* 2>/dev/null` \ + `ls -dr ${srcdir}/../tcl[[8-9]].[[0-9]] 2>/dev/null` \ + `ls -dr ${srcdir}/../tcl[[8-9]].[[0-9]]* 2>/dev/null` ; do + if test "${TEA_PLATFORM}" = "windows" \ + -a -f "$i/win/tclConfig.sh" ; then + ac_cv_c_tclconfig="`(cd $i/win; pwd)`" + break + fi + if test -f "$i/unix/tclConfig.sh" ; then + ac_cv_c_tclconfig="`(cd $i/unix; pwd)`" + break + fi + done + fi + ]) + + if test x"${ac_cv_c_tclconfig}" = x ; then + TCL_BIN_DIR="# no Tcl configs found" + AC_MSG_ERROR([Can't find Tcl configuration definitions. Use --with-tcl to specify a directory containing tclConfig.sh]) + else + no_tcl= + TCL_BIN_DIR="${ac_cv_c_tclconfig}" + AC_MSG_RESULT([found ${TCL_BIN_DIR}/tclConfig.sh]) + fi + fi +]) + +#------------------------------------------------------------------------ +# TEA_PATH_TKCONFIG -- +# +# Locate the tkConfig.sh file +# +# Arguments: +# none +# +# Results: +# +# Adds the following arguments to configure: +# --with-tk=... +# +# Defines the following vars: +# TK_BIN_DIR Full path to the directory containing +# the tkConfig.sh file +#------------------------------------------------------------------------ + +AC_DEFUN([TEA_PATH_TKCONFIG], [ + # + # Ok, lets find the tk configuration + # First, look for one uninstalled. + # the alternative search directory is invoked by --with-tk + # + + if test x"${no_tk}" = x ; then + # we reset no_tk in case something fails here + no_tk=true + AC_ARG_WITH(tk, + AC_HELP_STRING([--with-tk], + [directory containing tk configuration (tkConfig.sh)]), + with_tkconfig="${withval}") + AC_MSG_CHECKING([for Tk configuration]) + AC_CACHE_VAL(ac_cv_c_tkconfig,[ + + # First check to see if --with-tkconfig was specified. + if test x"${with_tkconfig}" != x ; then + case "${with_tkconfig}" in + */tkConfig.sh ) + if test -f "${with_tkconfig}"; then + AC_MSG_WARN([--with-tk argument should refer to directory containing tkConfig.sh, not to tkConfig.sh itself]) + with_tkconfig="`echo "${with_tkconfig}" | sed 's!/tkConfig\.sh$!!'`" + fi ;; + esac + if test -f "${with_tkconfig}/tkConfig.sh" ; then + ac_cv_c_tkconfig="`(cd "${with_tkconfig}"; pwd)`" + else + AC_MSG_ERROR([${with_tkconfig} directory doesn't contain tkConfig.sh]) + fi + fi + + # then check for a private Tk library + if test x"${ac_cv_c_tkconfig}" = x ; then + for i in \ + ../tk \ + `ls -dr ../tk[[8-9]].[[0-9]].[[0-9]]* 2>/dev/null` \ + `ls -dr ../tk[[8-9]].[[0-9]] 2>/dev/null` \ + `ls -dr ../tk[[8-9]].[[0-9]]* 2>/dev/null` \ + ../../tk \ + `ls -dr ../../tk[[8-9]].[[0-9]].[[0-9]]* 2>/dev/null` \ + `ls -dr ../../tk[[8-9]].[[0-9]] 2>/dev/null` \ + `ls -dr ../../tk[[8-9]].[[0-9]]* 2>/dev/null` \ + ../../../tk \ + `ls -dr ../../../tk[[8-9]].[[0-9]].[[0-9]]* 2>/dev/null` \ + `ls -dr ../../../tk[[8-9]].[[0-9]] 2>/dev/null` \ + `ls -dr ../../../tk[[8-9]].[[0-9]]* 2>/dev/null` ; do + if test "${TEA_PLATFORM}" = "windows" \ + -a -f "$i/win/tkConfig.sh" ; then + ac_cv_c_tkconfig="`(cd $i/win; pwd)`" + break + fi + if test -f "$i/unix/tkConfig.sh" ; then + ac_cv_c_tkconfig="`(cd $i/unix; pwd)`" + break + fi + done + fi + + # on Darwin, check in Framework installation locations + if test "`uname -s`" = "Darwin" -a x"${ac_cv_c_tkconfig}" = x ; then + for i in `ls -d ~/Library/Frameworks 2>/dev/null` \ + `ls -d /Library/Frameworks 2>/dev/null` \ + `ls -d /Network/Library/Frameworks 2>/dev/null` \ + `ls -d /System/Library/Frameworks 2>/dev/null` \ + ; do + if test -f "$i/Tk.framework/tkConfig.sh" ; then + ac_cv_c_tkconfig="`(cd $i/Tk.framework; pwd)`" + break + fi + done + fi + + # check in a few common install locations + if test x"${ac_cv_c_tkconfig}" = x ; then + for i in `ls -d ${libdir} 2>/dev/null` \ + `ls -d ${exec_prefix}/lib 2>/dev/null` \ + `ls -d ${prefix}/lib 2>/dev/null` \ + `ls -d /usr/local/lib 2>/dev/null` \ + `ls -d /usr/contrib/lib 2>/dev/null` \ + `ls -d /usr/lib 2>/dev/null` \ + `ls -d /usr/lib64 2>/dev/null` \ + ; do + if test -f "$i/tkConfig.sh" ; then + ac_cv_c_tkconfig="`(cd $i; pwd)`" + break + fi + done + fi + + # TEA specific: on Windows, check in common installation locations + if test "${TEA_PLATFORM}" = "windows" \ + -a x"${ac_cv_c_tkconfig}" = x ; then + for i in `ls -d C:/Tcl/lib 2>/dev/null` \ + `ls -d C:/Progra~1/Tcl/lib 2>/dev/null` \ + ; do + if test -f "$i/tkConfig.sh" ; then + ac_cv_c_tkconfig="`(cd $i; pwd)`" + break + fi + done + fi + + # check in a few other private locations + if test x"${ac_cv_c_tkconfig}" = x ; then + for i in \ + ${srcdir}/../tk \ + `ls -dr ${srcdir}/../tk[[8-9]].[[0-9]].[[0-9]]* 2>/dev/null` \ + `ls -dr ${srcdir}/../tk[[8-9]].[[0-9]] 2>/dev/null` \ + `ls -dr ${srcdir}/../tk[[8-9]].[[0-9]]* 2>/dev/null` ; do + if test "${TEA_PLATFORM}" = "windows" \ + -a -f "$i/win/tkConfig.sh" ; then + ac_cv_c_tkconfig="`(cd $i/win; pwd)`" + break + fi + if test -f "$i/unix/tkConfig.sh" ; then + ac_cv_c_tkconfig="`(cd $i/unix; pwd)`" + break + fi + done + fi + ]) + + if test x"${ac_cv_c_tkconfig}" = x ; then + TK_BIN_DIR="# no Tk configs found" + AC_MSG_ERROR([Can't find Tk configuration definitions. Use --with-tk to specify a directory containing tkConfig.sh]) + else + no_tk= + TK_BIN_DIR="${ac_cv_c_tkconfig}" + AC_MSG_RESULT([found ${TK_BIN_DIR}/tkConfig.sh]) + fi + fi +]) + +#------------------------------------------------------------------------ +# TEA_LOAD_TCLCONFIG -- +# +# Load the tclConfig.sh file +# +# Arguments: +# +# Requires the following vars to be set: +# TCL_BIN_DIR +# +# Results: +# +# Substitutes the following vars: +# TCL_BIN_DIR +# TCL_SRC_DIR +# TCL_LIB_FILE +#------------------------------------------------------------------------ + +AC_DEFUN([TEA_LOAD_TCLCONFIG], [ + AC_MSG_CHECKING([for existence of ${TCL_BIN_DIR}/tclConfig.sh]) + + if test -f "${TCL_BIN_DIR}/tclConfig.sh" ; then + AC_MSG_RESULT([loading]) + . "${TCL_BIN_DIR}/tclConfig.sh" + else + AC_MSG_RESULT([could not find ${TCL_BIN_DIR}/tclConfig.sh]) + fi + + # eval is required to do the TCL_DBGX substitution + eval "TCL_LIB_FILE=\"${TCL_LIB_FILE}\"" + eval "TCL_STUB_LIB_FILE=\"${TCL_STUB_LIB_FILE}\"" + + # If the TCL_BIN_DIR is the build directory (not the install directory), + # then set the common variable name to the value of the build variables. + # For example, the variable TCL_LIB_SPEC will be set to the value + # of TCL_BUILD_LIB_SPEC. An extension should make use of TCL_LIB_SPEC + # instead of TCL_BUILD_LIB_SPEC since it will work with both an + # installed and uninstalled version of Tcl. + if test -f "${TCL_BIN_DIR}/Makefile" ; then + TCL_LIB_SPEC="${TCL_BUILD_LIB_SPEC}" + TCL_STUB_LIB_SPEC="${TCL_BUILD_STUB_LIB_SPEC}" + TCL_STUB_LIB_PATH="${TCL_BUILD_STUB_LIB_PATH}" + elif test "`uname -s`" = "Darwin"; then + # If Tcl was built as a framework, attempt to use the libraries + # from the framework at the given location so that linking works + # against Tcl.framework installed in an arbitrary location. + case ${TCL_DEFS} in + *TCL_FRAMEWORK*) + if test -f "${TCL_BIN_DIR}/${TCL_LIB_FILE}"; then + for i in "`cd "${TCL_BIN_DIR}"; pwd`" \ + "`cd "${TCL_BIN_DIR}"/../..; pwd`"; do + if test "`basename "$i"`" = "${TCL_LIB_FILE}.framework"; then + TCL_LIB_SPEC="-F`dirname "$i" | sed -e 's/ /\\\\ /g'` -framework ${TCL_LIB_FILE}" + break + fi + done + fi + if test -f "${TCL_BIN_DIR}/${TCL_STUB_LIB_FILE}"; then + TCL_STUB_LIB_SPEC="-L`echo "${TCL_BIN_DIR}" | sed -e 's/ /\\\\ /g'` ${TCL_STUB_LIB_FLAG}" + TCL_STUB_LIB_PATH="${TCL_BIN_DIR}/${TCL_STUB_LIB_FILE}" + fi + ;; + esac + fi + + # eval is required to do the TCL_DBGX substitution + eval "TCL_LIB_FLAG=\"${TCL_LIB_FLAG}\"" + eval "TCL_LIB_SPEC=\"${TCL_LIB_SPEC}\"" + eval "TCL_STUB_LIB_FLAG=\"${TCL_STUB_LIB_FLAG}\"" + eval "TCL_STUB_LIB_SPEC=\"${TCL_STUB_LIB_SPEC}\"" + + AC_SUBST(TCL_VERSION) + AC_SUBST(TCL_PATCH_LEVEL) + AC_SUBST(TCL_BIN_DIR) + AC_SUBST(TCL_SRC_DIR) + + AC_SUBST(TCL_LIB_FILE) + AC_SUBST(TCL_LIB_FLAG) + AC_SUBST(TCL_LIB_SPEC) + + AC_SUBST(TCL_STUB_LIB_FILE) + AC_SUBST(TCL_STUB_LIB_FLAG) + AC_SUBST(TCL_STUB_LIB_SPEC) + + AC_MSG_CHECKING([platform]) + hold_cc=$CC; CC="$TCL_CC" + AC_TRY_COMPILE(,[ + #ifdef _WIN32 + #error win32 + #endif + ], TEA_PLATFORM="unix", + TEA_PLATFORM="windows" + ) + CC=$hold_cc + AC_MSG_RESULT($TEA_PLATFORM) + + # The BUILD_$pkg is to define the correct extern storage class + # handling when making this package + AC_DEFINE_UNQUOTED(BUILD_${PACKAGE_NAME}, [], + [Building extension source?]) + # Do this here as we have fully defined TEA_PLATFORM now + if test "${TEA_PLATFORM}" = "windows" ; then + EXEEXT=".exe" + CLEANFILES="$CLEANFILES *.lib *.dll *.pdb *.exp" + fi + + # TEA specific: + AC_SUBST(CLEANFILES) + AC_SUBST(TCL_LIBS) + AC_SUBST(TCL_DEFS) + AC_SUBST(TCL_EXTRA_CFLAGS) + AC_SUBST(TCL_LD_FLAGS) + AC_SUBST(TCL_SHLIB_LD_LIBS) +]) + +#------------------------------------------------------------------------ +# TEA_LOAD_TKCONFIG -- +# +# Load the tkConfig.sh file +# +# Arguments: +# +# Requires the following vars to be set: +# TK_BIN_DIR +# +# Results: +# +# Sets the following vars that should be in tkConfig.sh: +# TK_BIN_DIR +#------------------------------------------------------------------------ + +AC_DEFUN([TEA_LOAD_TKCONFIG], [ + AC_MSG_CHECKING([for existence of ${TK_BIN_DIR}/tkConfig.sh]) + + if test -f "${TK_BIN_DIR}/tkConfig.sh" ; then + AC_MSG_RESULT([loading]) + . "${TK_BIN_DIR}/tkConfig.sh" + else + AC_MSG_RESULT([could not find ${TK_BIN_DIR}/tkConfig.sh]) + fi + + # eval is required to do the TK_DBGX substitution + eval "TK_LIB_FILE=\"${TK_LIB_FILE}\"" + eval "TK_STUB_LIB_FILE=\"${TK_STUB_LIB_FILE}\"" + + # If the TK_BIN_DIR is the build directory (not the install directory), + # then set the common variable name to the value of the build variables. + # For example, the variable TK_LIB_SPEC will be set to the value + # of TK_BUILD_LIB_SPEC. An extension should make use of TK_LIB_SPEC + # instead of TK_BUILD_LIB_SPEC since it will work with both an + # installed and uninstalled version of Tcl. + if test -f "${TK_BIN_DIR}/Makefile" ; then + TK_LIB_SPEC="${TK_BUILD_LIB_SPEC}" + TK_STUB_LIB_SPEC="${TK_BUILD_STUB_LIB_SPEC}" + TK_STUB_LIB_PATH="${TK_BUILD_STUB_LIB_PATH}" + elif test "`uname -s`" = "Darwin"; then + # If Tk was built as a framework, attempt to use the libraries + # from the framework at the given location so that linking works + # against Tk.framework installed in an arbitrary location. + case ${TK_DEFS} in + *TK_FRAMEWORK*) + if test -f "${TK_BIN_DIR}/${TK_LIB_FILE}"; then + for i in "`cd "${TK_BIN_DIR}"; pwd`" \ + "`cd "${TK_BIN_DIR}"/../..; pwd`"; do + if test "`basename "$i"`" = "${TK_LIB_FILE}.framework"; then + TK_LIB_SPEC="-F`dirname "$i" | sed -e 's/ /\\\\ /g'` -framework ${TK_LIB_FILE}" + break + fi + done + fi + if test -f "${TK_BIN_DIR}/${TK_STUB_LIB_FILE}"; then + TK_STUB_LIB_SPEC="-L` echo "${TK_BIN_DIR}" | sed -e 's/ /\\\\ /g'` ${TK_STUB_LIB_FLAG}" + TK_STUB_LIB_PATH="${TK_BIN_DIR}/${TK_STUB_LIB_FILE}" + fi + ;; + esac + fi + + # eval is required to do the TK_DBGX substitution + eval "TK_LIB_FLAG=\"${TK_LIB_FLAG}\"" + eval "TK_LIB_SPEC=\"${TK_LIB_SPEC}\"" + eval "TK_STUB_LIB_FLAG=\"${TK_STUB_LIB_FLAG}\"" + eval "TK_STUB_LIB_SPEC=\"${TK_STUB_LIB_SPEC}\"" + + # TEA specific: Ensure windowingsystem is defined + if test "${TEA_PLATFORM}" = "unix" ; then + case ${TK_DEFS} in + *MAC_OSX_TK*) + AC_DEFINE(MAC_OSX_TK, 1, [Are we building against Mac OS X TkAqua?]) + TEA_WINDOWINGSYSTEM="aqua" + ;; + *) + TEA_WINDOWINGSYSTEM="x11" + ;; + esac + elif test "${TEA_PLATFORM}" = "windows" ; then + TEA_WINDOWINGSYSTEM="win32" + fi + + AC_SUBST(TK_VERSION) + AC_SUBST(TK_BIN_DIR) + AC_SUBST(TK_SRC_DIR) + + AC_SUBST(TK_LIB_FILE) + AC_SUBST(TK_LIB_FLAG) + AC_SUBST(TK_LIB_SPEC) + + AC_SUBST(TK_STUB_LIB_FILE) + AC_SUBST(TK_STUB_LIB_FLAG) + AC_SUBST(TK_STUB_LIB_SPEC) + + # TEA specific: + AC_SUBST(TK_LIBS) + AC_SUBST(TK_XINCLUDES) +]) + +#------------------------------------------------------------------------ +# TEA_PROG_TCLSH +# Determine the fully qualified path name of the tclsh executable +# in the Tcl build directory or the tclsh installed in a bin +# directory. This macro will correctly determine the name +# of the tclsh executable even if tclsh has not yet been +# built in the build directory. The tclsh found is always +# associated with a tclConfig.sh file. This tclsh should be used +# only for running extension test cases. It should never be +# or generation of files (like pkgIndex.tcl) at build time. +# +# Arguments: +# none +# +# Results: +# Substitutes the following vars: +# TCLSH_PROG +#------------------------------------------------------------------------ + +AC_DEFUN([TEA_PROG_TCLSH], [ + AC_MSG_CHECKING([for tclsh]) + if test -f "${TCL_BIN_DIR}/Makefile" ; then + # tclConfig.sh is in Tcl build directory + if test "${TEA_PLATFORM}" = "windows"; then + TCLSH_PROG="${TCL_BIN_DIR}/tclsh${TCL_MAJOR_VERSION}${TCL_MINOR_VERSION}${TCL_DBGX}${EXEEXT}" + else + TCLSH_PROG="${TCL_BIN_DIR}/tclsh" + fi + else + # tclConfig.sh is in install location + if test "${TEA_PLATFORM}" = "windows"; then + TCLSH_PROG="tclsh${TCL_MAJOR_VERSION}${TCL_MINOR_VERSION}${TCL_DBGX}${EXEEXT}" + else + TCLSH_PROG="tclsh${TCL_MAJOR_VERSION}.${TCL_MINOR_VERSION}${TCL_DBGX}" + fi + list="`ls -d ${TCL_BIN_DIR}/../bin 2>/dev/null` \ + `ls -d ${TCL_BIN_DIR}/.. 2>/dev/null` \ + `ls -d ${TCL_PREFIX}/bin 2>/dev/null`" + for i in $list ; do + if test -f "$i/${TCLSH_PROG}" ; then + REAL_TCL_BIN_DIR="`cd "$i"; pwd`/" + break + fi + done + TCLSH_PROG="${REAL_TCL_BIN_DIR}${TCLSH_PROG}" + fi + AC_MSG_RESULT([${TCLSH_PROG}]) + AC_SUBST(TCLSH_PROG) +]) + +#------------------------------------------------------------------------ +# TEA_PROG_WISH +# Determine the fully qualified path name of the wish executable +# in the Tk build directory or the wish installed in a bin +# directory. This macro will correctly determine the name +# of the wish executable even if wish has not yet been +# built in the build directory. The wish found is always +# associated with a tkConfig.sh file. This wish should be used +# only for running extension test cases. It should never be +# or generation of files (like pkgIndex.tcl) at build time. +# +# Arguments: +# none +# +# Results: +# Substitutes the following vars: +# WISH_PROG +#------------------------------------------------------------------------ + +AC_DEFUN([TEA_PROG_WISH], [ + AC_MSG_CHECKING([for wish]) + if test -f "${TK_BIN_DIR}/Makefile" ; then + # tkConfig.sh is in Tk build directory + if test "${TEA_PLATFORM}" = "windows"; then + WISH_PROG="${TK_BIN_DIR}/wish${TK_MAJOR_VERSION}${TK_MINOR_VERSION}${TK_DBGX}${EXEEXT}" + else + WISH_PROG="${TK_BIN_DIR}/wish" + fi + else + # tkConfig.sh is in install location + if test "${TEA_PLATFORM}" = "windows"; then + WISH_PROG="wish${TK_MAJOR_VERSION}${TK_MINOR_VERSION}${TK_DBGX}${EXEEXT}" + else + WISH_PROG="wish${TK_MAJOR_VERSION}.${TK_MINOR_VERSION}${TK_DBGX}" + fi + list="`ls -d ${TK_BIN_DIR}/../bin 2>/dev/null` \ + `ls -d ${TK_BIN_DIR}/.. 2>/dev/null` \ + `ls -d ${TK_PREFIX}/bin 2>/dev/null`" + for i in $list ; do + if test -f "$i/${WISH_PROG}" ; then + REAL_TK_BIN_DIR="`cd "$i"; pwd`/" + break + fi + done + WISH_PROG="${REAL_TK_BIN_DIR}${WISH_PROG}" + fi + AC_MSG_RESULT([${WISH_PROG}]) + AC_SUBST(WISH_PROG) +]) + +#------------------------------------------------------------------------ +# TEA_ENABLE_SHARED -- +# +# Allows the building of shared libraries +# +# Arguments: +# none +# +# Results: +# +# Adds the following arguments to configure: +# --enable-shared=yes|no +# +# Defines the following vars: +# STATIC_BUILD Used for building import/export libraries +# on Windows. +# +# Sets the following vars: +# SHARED_BUILD Value of 1 or 0 +#------------------------------------------------------------------------ + +AC_DEFUN([TEA_ENABLE_SHARED], [ + AC_MSG_CHECKING([how to build libraries]) + AC_ARG_ENABLE(shared, + AC_HELP_STRING([--enable-shared], + [build and link with shared libraries (default: on)]), + [tcl_ok=$enableval], [tcl_ok=yes]) + + if test "${enable_shared+set}" = set; then + enableval="$enable_shared" + tcl_ok=$enableval + else + tcl_ok=yes + fi + + if test "$tcl_ok" = "yes" ; then + AC_MSG_RESULT([shared]) + SHARED_BUILD=1 + else + AC_MSG_RESULT([static]) + SHARED_BUILD=0 + AC_DEFINE(STATIC_BUILD, 1, [Is this a static build?]) + fi + AC_SUBST(SHARED_BUILD) +]) + +#------------------------------------------------------------------------ +# TEA_ENABLE_THREADS -- +# +# Specify if thread support should be enabled. If "yes" is specified +# as an arg (optional), threads are enabled by default, "no" means +# threads are disabled. "yes" is the default. +# +# TCL_THREADS is checked so that if you are compiling an extension +# against a threaded core, your extension must be compiled threaded +# as well. +# +# Note that it is legal to have a thread enabled extension run in a +# threaded or non-threaded Tcl core, but a non-threaded extension may +# only run in a non-threaded Tcl core. +# +# Arguments: +# none +# +# Results: +# +# Adds the following arguments to configure: +# --enable-threads +# +# Sets the following vars: +# THREADS_LIBS Thread library(s) +# +# Defines the following vars: +# TCL_THREADS +# _REENTRANT +# _THREAD_SAFE +#------------------------------------------------------------------------ + +AC_DEFUN([TEA_ENABLE_THREADS], [ + AC_ARG_ENABLE(threads, + AC_HELP_STRING([--enable-threads], + [build with threads]), + [tcl_ok=$enableval], [tcl_ok=yes]) + + if test "${enable_threads+set}" = set; then + enableval="$enable_threads" + tcl_ok=$enableval + else + tcl_ok=yes + fi + + if test "$tcl_ok" = "yes" -o "${TCL_THREADS}" = 1; then + TCL_THREADS=1 + + if test "${TEA_PLATFORM}" != "windows" ; then + # We are always OK on Windows, so check what this platform wants: + + # USE_THREAD_ALLOC tells us to try the special thread-based + # allocator that significantly reduces lock contention + AC_DEFINE(USE_THREAD_ALLOC, 1, + [Do we want to use the threaded memory allocator?]) + AC_DEFINE(_REENTRANT, 1, [Do we want the reentrant OS API?]) + if test "`uname -s`" = "SunOS" ; then + AC_DEFINE(_POSIX_PTHREAD_SEMANTICS, 1, + [Do we really want to follow the standard? Yes we do!]) + fi + AC_DEFINE(_THREAD_SAFE, 1, [Do we want the thread-safe OS API?]) + AC_CHECK_LIB(pthread,pthread_mutex_init,tcl_ok=yes,tcl_ok=no) + if test "$tcl_ok" = "no"; then + # Check a little harder for __pthread_mutex_init in the same + # library, as some systems hide it there until pthread.h is + # defined. We could alternatively do an AC_TRY_COMPILE with + # pthread.h, but that will work with libpthread really doesn't + # exist, like AIX 4.2. [Bug: 4359] + AC_CHECK_LIB(pthread, __pthread_mutex_init, + tcl_ok=yes, tcl_ok=no) + fi + + if test "$tcl_ok" = "yes"; then + # The space is needed + THREADS_LIBS=" -lpthread" + else + AC_CHECK_LIB(pthreads, pthread_mutex_init, + tcl_ok=yes, tcl_ok=no) + if test "$tcl_ok" = "yes"; then + # The space is needed + THREADS_LIBS=" -lpthreads" + else + AC_CHECK_LIB(c, pthread_mutex_init, + tcl_ok=yes, tcl_ok=no) + if test "$tcl_ok" = "no"; then + AC_CHECK_LIB(c_r, pthread_mutex_init, + tcl_ok=yes, tcl_ok=no) + if test "$tcl_ok" = "yes"; then + # The space is needed + THREADS_LIBS=" -pthread" + else + TCL_THREADS=0 + AC_MSG_WARN([Do not know how to find pthread lib on your system - thread support disabled]) + fi + fi + fi + fi + fi + else + TCL_THREADS=0 + fi + # Do checking message here to not mess up interleaved configure output + AC_MSG_CHECKING([for building with threads]) + if test "${TCL_THREADS}" = 1; then + AC_DEFINE(TCL_THREADS, 1, [Are we building with threads enabled?]) + AC_MSG_RESULT([yes (default)]) + else + AC_MSG_RESULT([no]) + fi + # TCL_THREADS sanity checking. See if our request for building with + # threads is the same as the way Tcl was built. If not, warn the user. + case ${TCL_DEFS} in + *THREADS=1*) + if test "${TCL_THREADS}" = "0"; then + AC_MSG_WARN([ + Building ${PACKAGE_NAME} without threads enabled, but building against Tcl + that IS thread-enabled. It is recommended to use --enable-threads.]) + fi + ;; + *) + if test "${TCL_THREADS}" = "1"; then + AC_MSG_WARN([ + --enable-threads requested, but building against a Tcl that is NOT + thread-enabled. This is an OK configuration that will also run in + a thread-enabled core.]) + fi + ;; + esac + AC_SUBST(TCL_THREADS) +]) + +#------------------------------------------------------------------------ +# TEA_ENABLE_SYMBOLS -- +# +# Specify if debugging symbols should be used. +# Memory (TCL_MEM_DEBUG) debugging can also be enabled. +# +# Arguments: +# none +# +# TEA varies from core Tcl in that C|LDFLAGS_DEFAULT receives +# the value of C|LDFLAGS_OPTIMIZE|DEBUG already substituted. +# Requires the following vars to be set in the Makefile: +# CFLAGS_DEFAULT +# LDFLAGS_DEFAULT +# +# Results: +# +# Adds the following arguments to configure: +# --enable-symbols +# +# Defines the following vars: +# CFLAGS_DEFAULT Sets to $(CFLAGS_DEBUG) if true +# Sets to "$(CFLAGS_OPTIMIZE) -DNDEBUG" if false +# LDFLAGS_DEFAULT Sets to $(LDFLAGS_DEBUG) if true +# Sets to $(LDFLAGS_OPTIMIZE) if false +# DBGX Formerly used as debug library extension; +# always blank now. +#------------------------------------------------------------------------ + +AC_DEFUN([TEA_ENABLE_SYMBOLS], [ + dnl TEA specific: Make sure we are initialized + AC_REQUIRE([TEA_CONFIG_CFLAGS]) + AC_MSG_CHECKING([for build with symbols]) + AC_ARG_ENABLE(symbols, + AC_HELP_STRING([--enable-symbols], + [build with debugging symbols (default: off)]), + [tcl_ok=$enableval], [tcl_ok=no]) + DBGX="" + if test "$tcl_ok" = "no"; then + CFLAGS_DEFAULT="${CFLAGS_OPTIMIZE} -DNDEBUG" + LDFLAGS_DEFAULT="${LDFLAGS_OPTIMIZE}" + AC_MSG_RESULT([no]) + else + CFLAGS_DEFAULT="${CFLAGS_DEBUG}" + LDFLAGS_DEFAULT="${LDFLAGS_DEBUG}" + if test "$tcl_ok" = "yes"; then + AC_MSG_RESULT([yes (standard debugging)]) + fi + fi + # TEA specific: + if test "${TEA_PLATFORM}" != "windows" ; then + LDFLAGS_DEFAULT="${LDFLAGS}" + fi + AC_SUBST(CFLAGS_DEFAULT) + AC_SUBST(LDFLAGS_DEFAULT) + AC_SUBST(TCL_DBGX) + + if test "$tcl_ok" = "mem" -o "$tcl_ok" = "all"; then + AC_DEFINE(TCL_MEM_DEBUG, 1, [Is memory debugging enabled?]) + fi + + if test "$tcl_ok" != "yes" -a "$tcl_ok" != "no"; then + if test "$tcl_ok" = "all"; then + AC_MSG_RESULT([enabled symbols mem debugging]) + else + AC_MSG_RESULT([enabled $tcl_ok debugging]) + fi + fi +]) + +#------------------------------------------------------------------------ +# TEA_ENABLE_LANGINFO -- +# +# Allows use of modern nl_langinfo check for better l10n. +# This is only relevant for Unix. +# +# Arguments: +# none +# +# Results: +# +# Adds the following arguments to configure: +# --enable-langinfo=yes|no (default is yes) +# +# Defines the following vars: +# HAVE_LANGINFO Triggers use of nl_langinfo if defined. +#------------------------------------------------------------------------ + +AC_DEFUN([TEA_ENABLE_LANGINFO], [ + AC_ARG_ENABLE(langinfo, + AC_HELP_STRING([--enable-langinfo], + [use nl_langinfo if possible to determine encoding at startup, otherwise use old heuristic (default: on)]), + [langinfo_ok=$enableval], [langinfo_ok=yes]) + + HAVE_LANGINFO=0 + if test "$langinfo_ok" = "yes"; then + AC_CHECK_HEADER(langinfo.h,[langinfo_ok=yes],[langinfo_ok=no]) + fi + AC_MSG_CHECKING([whether to use nl_langinfo]) + if test "$langinfo_ok" = "yes"; then + AC_CACHE_VAL(tcl_cv_langinfo_h, [ + AC_TRY_COMPILE([#include ], [nl_langinfo(CODESET);], + [tcl_cv_langinfo_h=yes],[tcl_cv_langinfo_h=no])]) + AC_MSG_RESULT([$tcl_cv_langinfo_h]) + if test $tcl_cv_langinfo_h = yes; then + AC_DEFINE(HAVE_LANGINFO, 1, [Do we have nl_langinfo()?]) + fi + else + AC_MSG_RESULT([$langinfo_ok]) + fi +]) + +#-------------------------------------------------------------------- +# TEA_CONFIG_SYSTEM +# +# Determine what the system is (some things cannot be easily checked +# on a feature-driven basis, alas). This can usually be done via the +# "uname" command. +# +# Arguments: +# none +# +# Results: +# Defines the following var: +# +# system - System/platform/version identification code. +#-------------------------------------------------------------------- + +AC_DEFUN([TEA_CONFIG_SYSTEM], [ + AC_CACHE_CHECK([system version], tcl_cv_sys_version, [ + # TEA specific: + if test "${TEA_PLATFORM}" = "windows" ; then + tcl_cv_sys_version=windows + else + tcl_cv_sys_version=`uname -s`-`uname -r` + if test "$?" -ne 0 ; then + AC_MSG_WARN([can't find uname command]) + tcl_cv_sys_version=unknown + else + if test "`uname -s`" = "AIX" ; then + tcl_cv_sys_version=AIX-`uname -v`.`uname -r` + fi + fi + fi + ]) + system=$tcl_cv_sys_version +]) + +#-------------------------------------------------------------------- +# TEA_CONFIG_CFLAGS +# +# Try to determine the proper flags to pass to the compiler +# for building shared libraries and other such nonsense. +# +# Arguments: +# none +# +# Results: +# +# Defines and substitutes the following vars: +# +# DL_OBJS, DL_LIBS - removed for TEA, only needed by core. +# LDFLAGS - Flags to pass to the compiler when linking object +# files into an executable application binary such +# as tclsh. +# LD_SEARCH_FLAGS-Flags to pass to ld, such as "-R /usr/local/tcl/lib", +# that tell the run-time dynamic linker where to look +# for shared libraries such as libtcl.so. Depends on +# the variable LIB_RUNTIME_DIR in the Makefile. Could +# be the same as CC_SEARCH_FLAGS if ${CC} is used to link. +# CC_SEARCH_FLAGS-Flags to pass to ${CC}, such as "-Wl,-rpath,/usr/local/tcl/lib", +# that tell the run-time dynamic linker where to look +# for shared libraries such as libtcl.so. Depends on +# the variable LIB_RUNTIME_DIR in the Makefile. +# SHLIB_CFLAGS - Flags to pass to cc when compiling the components +# of a shared library (may request position-independent +# code, among other things). +# SHLIB_LD - Base command to use for combining object files +# into a shared library. +# SHLIB_LD_LIBS - Dependent libraries for the linker to scan when +# creating shared libraries. This symbol typically +# goes at the end of the "ld" commands that build +# shared libraries. The value of the symbol defaults to +# "${LIBS}" if all of the dependent libraries should +# be specified when creating a shared library. If +# dependent libraries should not be specified (as on +# SunOS 4.x, where they cause the link to fail, or in +# general if Tcl and Tk aren't themselves shared +# libraries), then this symbol has an empty string +# as its value. +# SHLIB_SUFFIX - Suffix to use for the names of dynamically loadable +# extensions. An empty string means we don't know how +# to use shared libraries on this platform. +# LIB_SUFFIX - Specifies everything that comes after the "libfoo" +# in a static or shared library name, using the $PACKAGE_VERSION variable +# to put the version in the right place. This is used +# by platforms that need non-standard library names. +# Examples: ${PACKAGE_VERSION}.so.1.1 on NetBSD, since it needs +# to have a version after the .so, and ${PACKAGE_VERSION}.a +# on AIX, since a shared library needs to have +# a .a extension whereas shared objects for loadable +# extensions have a .so extension. Defaults to +# ${PACKAGE_VERSION}${SHLIB_SUFFIX}. +# CFLAGS_DEBUG - +# Flags used when running the compiler in debug mode +# CFLAGS_OPTIMIZE - +# Flags used when running the compiler in optimize mode +# CFLAGS - Additional CFLAGS added as necessary (usually 64-bit) +#-------------------------------------------------------------------- + +AC_DEFUN([TEA_CONFIG_CFLAGS], [ + dnl TEA specific: Make sure we are initialized + AC_REQUIRE([TEA_INIT]) + + # Step 0.a: Enable 64 bit support? + + AC_MSG_CHECKING([if 64bit support is requested]) + AC_ARG_ENABLE(64bit, + AC_HELP_STRING([--enable-64bit], + [enable 64bit support (default: off)]), + [do64bit=$enableval], [do64bit=no]) + AC_MSG_RESULT([$do64bit]) + + # Step 0.b: Enable Solaris 64 bit VIS support? + + AC_MSG_CHECKING([if 64bit Sparc VIS support is requested]) + AC_ARG_ENABLE(64bit-vis, + AC_HELP_STRING([--enable-64bit-vis], + [enable 64bit Sparc VIS support (default: off)]), + [do64bitVIS=$enableval], [do64bitVIS=no]) + AC_MSG_RESULT([$do64bitVIS]) + # Force 64bit on with VIS + AS_IF([test "$do64bitVIS" = "yes"], [do64bit=yes]) + + # Step 0.c: Check if visibility support is available. Do this here so + # that platform specific alternatives can be used below if this fails. + + AC_CACHE_CHECK([if compiler supports visibility "hidden"], + tcl_cv_cc_visibility_hidden, [ + hold_cflags=$CFLAGS; CFLAGS="$CFLAGS -Werror" + AC_TRY_LINK([ + extern __attribute__((__visibility__("hidden"))) void f(void); + void f(void) {}], [f();], tcl_cv_cc_visibility_hidden=yes, + tcl_cv_cc_visibility_hidden=no) + CFLAGS=$hold_cflags]) + AS_IF([test $tcl_cv_cc_visibility_hidden = yes], [ + AC_DEFINE(MODULE_SCOPE, + [extern __attribute__((__visibility__("hidden")))], + [Compiler support for module scope symbols]) + AC_DEFINE(HAVE_HIDDEN, [1], [Compiler support for module scope symbols]) + ]) + + # Step 0.d: Disable -rpath support? + + AC_MSG_CHECKING([if rpath support is requested]) + AC_ARG_ENABLE(rpath, + AC_HELP_STRING([--disable-rpath], + [disable rpath support (default: on)]), + [doRpath=$enableval], [doRpath=yes]) + AC_MSG_RESULT([$doRpath]) + + # TEA specific: Cross-compiling options for Windows/CE builds? + + AS_IF([test "${TEA_PLATFORM}" = windows], [ + AC_MSG_CHECKING([if Windows/CE build is requested]) + AC_ARG_ENABLE(wince, + AC_HELP_STRING([--enable-wince], + [enable Win/CE support (where applicable)]), + [doWince=$enableval], [doWince=no]) + AC_MSG_RESULT([$doWince]) + ]) + + # Set the variable "system" to hold the name and version number + # for the system. + + TEA_CONFIG_SYSTEM + + # Require ranlib early so we can override it in special cases below. + + AC_REQUIRE([AC_PROG_RANLIB]) + + # Set configuration options based on system name and version. + # This is similar to Tcl's unix/tcl.m4 except that we've added a + # "windows" case and removed some core-only vars. + + do64bit_ok=no + # default to '{$LIBS}' and set to "" on per-platform necessary basis + SHLIB_LD_LIBS='${LIBS}' + # When ld needs options to work in 64-bit mode, put them in + # LDFLAGS_ARCH so they eventually end up in LDFLAGS even if [load] + # is disabled by the user. [Bug 1016796] + LDFLAGS_ARCH="" + UNSHARED_LIB_SUFFIX="" + # TEA specific: use PACKAGE_VERSION instead of VERSION + TCL_TRIM_DOTS='`echo ${PACKAGE_VERSION} | tr -d .`' + ECHO_VERSION='`echo ${PACKAGE_VERSION}`' + TCL_LIB_VERSIONS_OK=ok + CFLAGS_DEBUG=-g + AS_IF([test "$GCC" = yes], [ + CFLAGS_OPTIMIZE=-O2 + CFLAGS_WARNING="-Wall" + ], [ + CFLAGS_OPTIMIZE=-O + CFLAGS_WARNING="" + ]) + AC_CHECK_TOOL(AR, ar) + STLIB_LD='${AR} cr' + LD_LIBRARY_PATH_VAR="LD_LIBRARY_PATH" + AS_IF([test "x$SHLIB_VERSION" = x],[SHLIB_VERSION="1.0"]) + case $system in + # TEA specific: + windows) + # This is a 2-stage check to make sure we have the 64-bit SDK + # We have to know where the SDK is installed. + # This magic is based on MS Platform SDK for Win2003 SP1 - hobbs + # MACHINE is IX86 for LINK, but this is used by the manifest, + # which requires x86|amd64|ia64. + MACHINE="X86" + if test "$do64bit" != "no" ; then + if test "x${MSSDK}x" = "xx" ; then + MSSDK="C:/Progra~1/Microsoft Platform SDK" + fi + MSSDK=`echo "$MSSDK" | sed -e 's!\\\!/!g'` + PATH64="" + case "$do64bit" in + amd64|x64|yes) + MACHINE="AMD64" ; # default to AMD64 64-bit build + PATH64="${MSSDK}/Bin/Win64/x86/AMD64" + ;; + ia64) + MACHINE="IA64" + PATH64="${MSSDK}/Bin/Win64" + ;; + esac + if test "$GCC" != "yes" -a ! -d "${PATH64}" ; then + AC_MSG_WARN([Could not find 64-bit $MACHINE SDK to enable 64bit mode]) + AC_MSG_WARN([Ensure latest Platform SDK is installed]) + do64bit="no" + else + AC_MSG_RESULT([ Using 64-bit $MACHINE mode]) + do64bit_ok="yes" + fi + fi + + if test "$doWince" != "no" ; then + if test "$do64bit" != "no" ; then + AC_MSG_ERROR([Windows/CE and 64-bit builds incompatible]) + fi + if test "$GCC" = "yes" ; then + AC_MSG_ERROR([Windows/CE and GCC builds incompatible]) + fi + TEA_PATH_CELIB + # Set defaults for common evc4/PPC2003 setup + # Currently Tcl requires 300+, possibly 420+ for sockets + CEVERSION=420; # could be 211 300 301 400 420 ... + TARGETCPU=ARMV4; # could be ARMV4 ARM MIPS SH3 X86 ... + ARCH=ARM; # could be ARM MIPS X86EM ... + PLATFORM="Pocket PC 2003"; # or "Pocket PC 2002" + if test "$doWince" != "yes"; then + # If !yes then the user specified something + # Reset ARCH to allow user to skip specifying it + ARCH= + eval `echo $doWince | awk -F, '{ \ + if (length([$]1)) { printf "CEVERSION=\"%s\"\n", [$]1; \ + if ([$]1 < 400) { printf "PLATFORM=\"Pocket PC 2002\"\n" } }; \ + if (length([$]2)) { printf "TARGETCPU=\"%s\"\n", toupper([$]2) }; \ + if (length([$]3)) { printf "ARCH=\"%s\"\n", toupper([$]3) }; \ + if (length([$]4)) { printf "PLATFORM=\"%s\"\n", [$]4 }; \ + }'` + if test "x${ARCH}" = "x" ; then + ARCH=$TARGETCPU; + fi + fi + OSVERSION=WCE$CEVERSION; + if test "x${WCEROOT}" = "x" ; then + WCEROOT="C:/Program Files/Microsoft eMbedded C++ 4.0" + if test ! -d "${WCEROOT}" ; then + WCEROOT="C:/Program Files/Microsoft eMbedded Tools" + fi + fi + if test "x${SDKROOT}" = "x" ; then + SDKROOT="C:/Program Files/Windows CE Tools" + if test ! -d "${SDKROOT}" ; then + SDKROOT="C:/Windows CE Tools" + fi + fi + WCEROOT=`echo "$WCEROOT" | sed -e 's!\\\!/!g'` + SDKROOT=`echo "$SDKROOT" | sed -e 's!\\\!/!g'` + if test ! -d "${SDKROOT}/${OSVERSION}/${PLATFORM}/Lib/${TARGETCPU}" \ + -o ! -d "${WCEROOT}/EVC/${OSVERSION}/bin"; then + AC_MSG_ERROR([could not find PocketPC SDK or target compiler to enable WinCE mode [$CEVERSION,$TARGETCPU,$ARCH,$PLATFORM]]) + doWince="no" + else + # We could PATH_NOSPACE these, but that's not important, + # as long as we quote them when used. + CEINCLUDE="${SDKROOT}/${OSVERSION}/${PLATFORM}/include" + if test -d "${CEINCLUDE}/${TARGETCPU}" ; then + CEINCLUDE="${CEINCLUDE}/${TARGETCPU}" + fi + CELIBPATH="${SDKROOT}/${OSVERSION}/${PLATFORM}/Lib/${TARGETCPU}" + fi + fi + + if test "$GCC" != "yes" ; then + if test "${SHARED_BUILD}" = "0" ; then + runtime=-MT + else + runtime=-MD + fi + + if test "$do64bit" != "no" ; then + # All this magic is necessary for the Win64 SDK RC1 - hobbs + CC="\"${PATH64}/cl.exe\"" + CFLAGS="${CFLAGS} -I\"${MSSDK}/Include\" -I\"${MSSDK}/Include/crt\" -I\"${MSSDK}/Include/crt/sys\"" + RC="\"${MSSDK}/bin/rc.exe\"" + lflags="-nologo -MACHINE:${MACHINE} -LIBPATH:\"${MSSDK}/Lib/${MACHINE}\"" + LINKBIN="\"${PATH64}/link.exe\"" + CFLAGS_DEBUG="-nologo -Zi -Od -W3 ${runtime}d" + CFLAGS_OPTIMIZE="-nologo -O2 -W2 ${runtime}" + # Avoid 'unresolved external symbol __security_cookie' + # errors, c.f. http://support.microsoft.com/?id=894573 + TEA_ADD_LIBS([bufferoverflowU.lib]) + elif test "$doWince" != "no" ; then + CEBINROOT="${WCEROOT}/EVC/${OSVERSION}/bin" + if test "${TARGETCPU}" = "X86"; then + CC="\"${CEBINROOT}/cl.exe\"" + else + CC="\"${CEBINROOT}/cl${ARCH}.exe\"" + fi + CFLAGS="$CFLAGS -I\"${CELIB_DIR}/inc\" -I\"${CEINCLUDE}\"" + RC="\"${WCEROOT}/Common/EVC/bin/rc.exe\"" + arch=`echo ${ARCH} | awk '{print tolower([$]0)}'` + defs="${ARCH} _${ARCH}_ ${arch} PALM_SIZE _MT _WINDOWS" + if test "${SHARED_BUILD}" = "1" ; then + # Static CE builds require static celib as well + defs="${defs} _DLL" + fi + for i in $defs ; do + AC_DEFINE_UNQUOTED($i, 1, [WinCE def ]$i) + done + AC_DEFINE_UNQUOTED(_WIN32_WCE, $CEVERSION, [_WIN32_WCE version]) + AC_DEFINE_UNQUOTED(UNDER_CE, $CEVERSION, [UNDER_CE version]) + CFLAGS_DEBUG="-nologo -Zi -Od" + CFLAGS_OPTIMIZE="-nologo -Ox" + lversion=`echo ${CEVERSION} | sed -e 's/\(.\)\(..\)/\1\.\2/'` + lflags="-MACHINE:${ARCH} -LIBPATH:\"${CELIBPATH}\" -subsystem:windowsce,${lversion} -nologo" + LINKBIN="\"${CEBINROOT}/link.exe\"" + AC_SUBST(CELIB_DIR) + else + RC="rc" + lflags="-nologo" + LINKBIN="link" + CFLAGS_DEBUG="-nologo -Z7 -Od -W3 -WX ${runtime}d" + CFLAGS_OPTIMIZE="-nologo -O2 -W2 ${runtime}" + fi + fi + + if test "$GCC" = "yes"; then + # mingw gcc mode + AC_CHECK_TOOL(RC, windres) + CFLAGS_DEBUG="-g" + CFLAGS_OPTIMIZE="-O2 -fomit-frame-pointer" + SHLIB_LD='${CC} -shared' + UNSHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.a' + LDFLAGS_CONSOLE="-wl,--subsystem,console ${lflags}" + LDFLAGS_WINDOW="-wl,--subsystem,windows ${lflags}" + + AC_CACHE_CHECK(for cross-compile version of gcc, + ac_cv_cross, + AC_TRY_COMPILE([ + #ifdef _WIN32 + #error cross-compiler + #endif + ], [], + ac_cv_cross=yes, + ac_cv_cross=no) + ) + if test "$ac_cv_cross" = "yes"; then + case "$do64bit" in + amd64|x64|yes) + CC="x86_64-w64-mingw32-gcc" + LD="x86_64-w64-mingw32-ld" + AR="x86_64-w64-mingw32-ar" + RANLIB="x86_64-w64-mingw32-ranlib" + RC="x86_64-w64-mingw32-windres" + ;; + *) + CC="i686-w64-mingw32-gcc" + LD="i686-w64-mingw32-ld" + AR="i686-w64-mingw32-ar" + RANLIB="i686-w64-mingw32-ranlib" + RC="i686-w64-mingw32-windres" + ;; + esac + fi + + else + SHLIB_LD="${LINKBIN} -dll ${lflags}" + # link -lib only works when -lib is the first arg + STLIB_LD="${LINKBIN} -lib ${lflags}" + UNSHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.lib' + PATHTYPE=-w + # For information on what debugtype is most useful, see: + # http://msdn.microsoft.com/library/en-us/dnvc60/html/gendepdebug.asp + # and also + # http://msdn2.microsoft.com/en-us/library/y0zzbyt4%28VS.80%29.aspx + # This essentially turns it all on. + LDFLAGS_DEBUG="-debug -debugtype:cv" + LDFLAGS_OPTIMIZE="-release" + if test "$doWince" != "no" ; then + LDFLAGS_CONSOLE="-link ${lflags}" + LDFLAGS_WINDOW=${LDFLAGS_CONSOLE} + else + LDFLAGS_CONSOLE="-link -subsystem:console ${lflags}" + LDFLAGS_WINDOW="-link -subsystem:windows ${lflags}" + fi + fi + + SHLIB_SUFFIX=".dll" + SHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.dll' + + TCL_LIB_VERSIONS_OK=nodots + ;; + AIX-*) + AS_IF([test "${TCL_THREADS}" = "1" -a "$GCC" != "yes"], [ + # AIX requires the _r compiler when gcc isn't being used + case "${CC}" in + *_r|*_r\ *) + # ok ... + ;; + *) + # Make sure only first arg gets _r + CC=`echo "$CC" | sed -e 's/^\([[^ ]]*\)/\1_r/'` + ;; + esac + AC_MSG_RESULT([Using $CC for compiling with threads]) + ]) + LIBS="$LIBS -lc" + SHLIB_CFLAGS="" + SHLIB_SUFFIX=".so" + + LD_LIBRARY_PATH_VAR="LIBPATH" + + # Check to enable 64-bit flags for compiler/linker + AS_IF([test "$do64bit" = yes], [ + AS_IF([test "$GCC" = yes], [ + AC_MSG_WARN([64bit mode not supported with GCC on $system]) + ], [ + do64bit_ok=yes + CFLAGS="$CFLAGS -q64" + LDFLAGS_ARCH="-q64" + RANLIB="${RANLIB} -X64" + AR="${AR} -X64" + SHLIB_LD_FLAGS="-b64" + ]) + ]) + + AS_IF([test "`uname -m`" = ia64], [ + # AIX-5 uses ELF style dynamic libraries on IA-64, but not PPC + SHLIB_LD="/usr/ccs/bin/ld -G -z text" + AS_IF([test "$GCC" = yes], [ + CC_SEARCH_FLAGS='-Wl,-R,${LIB_RUNTIME_DIR}' + ], [ + CC_SEARCH_FLAGS='-R${LIB_RUNTIME_DIR}' + ]) + LD_SEARCH_FLAGS='-R ${LIB_RUNTIME_DIR}' + ], [ + AS_IF([test "$GCC" = yes], [ + SHLIB_LD='${CC} -shared -Wl,-bexpall' + ], [ + SHLIB_LD="/bin/ld -bhalt:4 -bM:SRE -bexpall -H512 -T512 -bnoentry" + LDFLAGS="$LDFLAGS -brtl" + ]) + SHLIB_LD="${SHLIB_LD} ${SHLIB_LD_FLAGS}" + CC_SEARCH_FLAGS='-L${LIB_RUNTIME_DIR}' + LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS} + ]) + ;; + BeOS*) + SHLIB_CFLAGS="-fPIC" + SHLIB_LD='${CC} -nostart' + SHLIB_SUFFIX=".so" + + #----------------------------------------------------------- + # Check for inet_ntoa in -lbind, for BeOS (which also needs + # -lsocket, even if the network functions are in -lnet which + # is always linked to, for compatibility. + #----------------------------------------------------------- + AC_CHECK_LIB(bind, inet_ntoa, [LIBS="$LIBS -lbind -lsocket"]) + ;; + BSD/OS-4.*) + SHLIB_CFLAGS="-export-dynamic -fPIC" + SHLIB_LD='${CC} -shared' + SHLIB_SUFFIX=".so" + LDFLAGS="$LDFLAGS -export-dynamic" + CC_SEARCH_FLAGS="" + LD_SEARCH_FLAGS="" + ;; + CYGWIN_*) + SHLIB_CFLAGS="" + SHLIB_LD='${CC} -shared' + SHLIB_SUFFIX=".dll" + EXEEXT=".exe" + do64bit_ok=yes + CC_SEARCH_FLAGS="" + LD_SEARCH_FLAGS="" + ;; + Haiku*) + LDFLAGS="$LDFLAGS -Wl,--export-dynamic" + SHLIB_CFLAGS="-fPIC" + SHLIB_SUFFIX=".so" + SHLIB_LD='${CC} -shared ${CFLAGS} ${LDFLAGS}' + AC_CHECK_LIB(network, inet_ntoa, [LIBS="$LIBS -lnetwork"]) + ;; + HP-UX-*.11.*) + # Use updated header definitions where possible + AC_DEFINE(_XOPEN_SOURCE_EXTENDED, 1, [Do we want to use the XOPEN network library?]) + # TEA specific: Needed by Tcl, but not most extensions + #AC_DEFINE(_XOPEN_SOURCE, 1, [Do we want to use the XOPEN network library?]) + #LIBS="$LIBS -lxnet" # Use the XOPEN network library + + AS_IF([test "`uname -m`" = ia64], [ + SHLIB_SUFFIX=".so" + # Use newer C++ library for C++ extensions + #if test "$GCC" != "yes" ; then + # CPPFLAGS="-AA" + #fi + ], [ + SHLIB_SUFFIX=".sl" + ]) + AC_CHECK_LIB(dld, shl_load, tcl_ok=yes, tcl_ok=no) + AS_IF([test "$tcl_ok" = yes], [ + LDFLAGS="$LDFLAGS -Wl,-E" + CC_SEARCH_FLAGS='-Wl,+s,+b,${LIB_RUNTIME_DIR}:.' + LD_SEARCH_FLAGS='+s +b ${LIB_RUNTIME_DIR}:.' + LD_LIBRARY_PATH_VAR="SHLIB_PATH" + ]) + AS_IF([test "$GCC" = yes], [ + SHLIB_LD='${CC} -shared' + LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS} + ], [ + CFLAGS="$CFLAGS -z" + # Users may want PA-RISC 1.1/2.0 portable code - needs HP cc + #CFLAGS="$CFLAGS +DAportable" + SHLIB_CFLAGS="+z" + SHLIB_LD="ld -b" + ]) + + # Check to enable 64-bit flags for compiler/linker + AS_IF([test "$do64bit" = "yes"], [ + AS_IF([test "$GCC" = yes], [ + case `${CC} -dumpmachine` in + hppa64*) + # 64-bit gcc in use. Fix flags for GNU ld. + do64bit_ok=yes + SHLIB_LD='${CC} -shared' + AS_IF([test $doRpath = yes], [ + CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}']) + LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS} + ;; + *) + AC_MSG_WARN([64bit mode not supported with GCC on $system]) + ;; + esac + ], [ + do64bit_ok=yes + CFLAGS="$CFLAGS +DD64" + LDFLAGS_ARCH="+DD64" + ]) + ]) ;; + IRIX-6.*) + SHLIB_CFLAGS="" + SHLIB_LD="ld -n32 -shared -rdata_shared" + SHLIB_SUFFIX=".so" + AS_IF([test $doRpath = yes], [ + CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}' + LD_SEARCH_FLAGS='-rpath ${LIB_RUNTIME_DIR}']) + AS_IF([test "$GCC" = yes], [ + CFLAGS="$CFLAGS -mabi=n32" + LDFLAGS="$LDFLAGS -mabi=n32" + ], [ + case $system in + IRIX-6.3) + # Use to build 6.2 compatible binaries on 6.3. + CFLAGS="$CFLAGS -n32 -D_OLD_TERMIOS" + ;; + *) + CFLAGS="$CFLAGS -n32" + ;; + esac + LDFLAGS="$LDFLAGS -n32" + ]) + ;; + IRIX64-6.*) + SHLIB_CFLAGS="" + SHLIB_LD="ld -n32 -shared -rdata_shared" + SHLIB_SUFFIX=".so" + AS_IF([test $doRpath = yes], [ + CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}' + LD_SEARCH_FLAGS='-rpath ${LIB_RUNTIME_DIR}']) + + # Check to enable 64-bit flags for compiler/linker + + AS_IF([test "$do64bit" = yes], [ + AS_IF([test "$GCC" = yes], [ + AC_MSG_WARN([64bit mode not supported by gcc]) + ], [ + do64bit_ok=yes + SHLIB_LD="ld -64 -shared -rdata_shared" + CFLAGS="$CFLAGS -64" + LDFLAGS_ARCH="-64" + ]) + ]) + ;; + Linux*|GNU*|NetBSD-Debian) + SHLIB_CFLAGS="-fPIC" + SHLIB_SUFFIX=".so" + + # TEA specific: + CFLAGS_OPTIMIZE="-O2 -fomit-frame-pointer" + + # TEA specific: use LDFLAGS_DEFAULT instead of LDFLAGS + SHLIB_LD='${CC} -shared ${CFLAGS} ${LDFLAGS_DEFAULT}' + LDFLAGS="$LDFLAGS -Wl,--export-dynamic" + AS_IF([test $doRpath = yes], [ + CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}']) + LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS} + AS_IF([test "`uname -m`" = "alpha"], [CFLAGS="$CFLAGS -mieee"]) + AS_IF([test $do64bit = yes], [ + AC_CACHE_CHECK([if compiler accepts -m64 flag], tcl_cv_cc_m64, [ + hold_cflags=$CFLAGS + CFLAGS="$CFLAGS -m64" + AC_TRY_LINK(,, tcl_cv_cc_m64=yes, tcl_cv_cc_m64=no) + CFLAGS=$hold_cflags]) + AS_IF([test $tcl_cv_cc_m64 = yes], [ + CFLAGS="$CFLAGS -m64" + do64bit_ok=yes + ]) + ]) + + # The combo of gcc + glibc has a bug related to inlining of + # functions like strtod(). The -fno-builtin flag should address + # this problem but it does not work. The -fno-inline flag is kind + # of overkill but it works. Disable inlining only when one of the + # files in compat/*.c is being linked in. + + AS_IF([test x"${USE_COMPAT}" != x],[CFLAGS="$CFLAGS -fno-inline"]) + ;; + Lynx*) + SHLIB_CFLAGS="-fPIC" + SHLIB_SUFFIX=".so" + CFLAGS_OPTIMIZE=-02 + SHLIB_LD='${CC} -shared' + LD_FLAGS="-Wl,--export-dynamic" + AS_IF([test $doRpath = yes], [ + CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}' + LD_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}']) + ;; + OpenBSD-*) + arch=`arch -s` + case "$arch" in + vax) + SHLIB_SUFFIX="" + SHARED_LIB_SUFFIX="" + LDFLAGS="" + ;; + *) + SHLIB_CFLAGS="-fPIC" + SHLIB_LD='${CC} -shared ${SHLIB_CFLAGS}' + SHLIB_SUFFIX=".so" + AS_IF([test $doRpath = yes], [ + CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}']) + LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS} + SHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.so.${SHLIB_VERSION}' + LDFLAGS="-Wl,-export-dynamic" + ;; + esac + case "$arch" in + vax) + CFLAGS_OPTIMIZE="-O1" + ;; + *) + CFLAGS_OPTIMIZE="-O2" + ;; + esac + AS_IF([test "${TCL_THREADS}" = "1"], [ + # On OpenBSD: Compile with -pthread + # Don't link with -lpthread + LIBS=`echo $LIBS | sed s/-lpthread//` + CFLAGS="$CFLAGS -pthread" + ]) + # OpenBSD doesn't do version numbers with dots. + UNSHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.a' + TCL_LIB_VERSIONS_OK=nodots + ;; + NetBSD-*) + # NetBSD has ELF and can use 'cc -shared' to build shared libs + SHLIB_CFLAGS="-fPIC" + SHLIB_LD='${CC} -shared ${SHLIB_CFLAGS}' + SHLIB_SUFFIX=".so" + LDFLAGS="$LDFLAGS -export-dynamic" + AS_IF([test $doRpath = yes], [ + CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}']) + LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS} + AS_IF([test "${TCL_THREADS}" = "1"], [ + # The -pthread needs to go in the CFLAGS, not LIBS + LIBS=`echo $LIBS | sed s/-pthread//` + CFLAGS="$CFLAGS -pthread" + LDFLAGS="$LDFLAGS -pthread" + ]) + ;; + FreeBSD-*) + # This configuration from FreeBSD Ports. + SHLIB_CFLAGS="-fPIC" + SHLIB_LD="${CC} -shared" + TCL_SHLIB_LD_EXTRAS="-Wl,-soname=\$[@]" + SHLIB_SUFFIX=".so" + LDFLAGS="" + AS_IF([test $doRpath = yes], [ + CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}' + LD_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}']) + AS_IF([test "${TCL_THREADS}" = "1"], [ + # The -pthread needs to go in the LDFLAGS, not LIBS + LIBS=`echo $LIBS | sed s/-pthread//` + CFLAGS="$CFLAGS $PTHREAD_CFLAGS" + LDFLAGS="$LDFLAGS $PTHREAD_LIBS"]) + # Version numbers are dot-stripped by system policy. + TCL_TRIM_DOTS=`echo ${PACKAGE_VERSION} | tr -d .` + UNSHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.a' + SHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}\$\{DBGX\}.so.1' + TCL_LIB_VERSIONS_OK=nodots + ;; + Darwin-*) + CFLAGS_OPTIMIZE="-Os" + SHLIB_CFLAGS="-fno-common" + # To avoid discrepancies between what headers configure sees during + # preprocessing tests and compiling tests, move any -isysroot and + # -mmacosx-version-min flags from CFLAGS to CPPFLAGS: + CPPFLAGS="${CPPFLAGS} `echo " ${CFLAGS}" | \ + awk 'BEGIN {FS=" +-";ORS=" "}; {for (i=2;i<=NF;i++) \ + if ([$]i~/^(isysroot|mmacosx-version-min)/) print "-"[$]i}'`" + CFLAGS="`echo " ${CFLAGS}" | \ + awk 'BEGIN {FS=" +-";ORS=" "}; {for (i=2;i<=NF;i++) \ + if (!([$]i~/^(isysroot|mmacosx-version-min)/)) print "-"[$]i}'`" + AS_IF([test $do64bit = yes], [ + case `arch` in + ppc) + AC_CACHE_CHECK([if compiler accepts -arch ppc64 flag], + tcl_cv_cc_arch_ppc64, [ + hold_cflags=$CFLAGS + CFLAGS="$CFLAGS -arch ppc64 -mpowerpc64 -mcpu=G5" + AC_TRY_LINK(,, tcl_cv_cc_arch_ppc64=yes, + tcl_cv_cc_arch_ppc64=no) + CFLAGS=$hold_cflags]) + AS_IF([test $tcl_cv_cc_arch_ppc64 = yes], [ + CFLAGS="$CFLAGS -arch ppc64 -mpowerpc64 -mcpu=G5" + do64bit_ok=yes + ]);; + i386) + AC_CACHE_CHECK([if compiler accepts -arch x86_64 flag], + tcl_cv_cc_arch_x86_64, [ + hold_cflags=$CFLAGS + CFLAGS="$CFLAGS -arch x86_64" + AC_TRY_LINK(,, tcl_cv_cc_arch_x86_64=yes, + tcl_cv_cc_arch_x86_64=no) + CFLAGS=$hold_cflags]) + AS_IF([test $tcl_cv_cc_arch_x86_64 = yes], [ + CFLAGS="$CFLAGS -arch x86_64" + do64bit_ok=yes + ]);; + *) + AC_MSG_WARN([Don't know how enable 64-bit on architecture `arch`]);; + esac + ], [ + # Check for combined 32-bit and 64-bit fat build + AS_IF([echo "$CFLAGS " |grep -E -q -- '-arch (ppc64|x86_64) ' \ + && echo "$CFLAGS " |grep -E -q -- '-arch (ppc|i386) '], [ + fat_32_64=yes]) + ]) + # TEA specific: use LDFLAGS_DEFAULT instead of LDFLAGS + SHLIB_LD='${CC} -dynamiclib ${CFLAGS} ${LDFLAGS_DEFAULT}' + AC_CACHE_CHECK([if ld accepts -single_module flag], tcl_cv_ld_single_module, [ + hold_ldflags=$LDFLAGS + LDFLAGS="$LDFLAGS -dynamiclib -Wl,-single_module" + AC_TRY_LINK(, [int i;], tcl_cv_ld_single_module=yes, tcl_cv_ld_single_module=no) + LDFLAGS=$hold_ldflags]) + AS_IF([test $tcl_cv_ld_single_module = yes], [ + SHLIB_LD="${SHLIB_LD} -Wl,-single_module" + ]) + # TEA specific: link shlib with current and compatibility version flags + vers=`echo ${PACKAGE_VERSION} | sed -e 's/^\([[0-9]]\{1,5\}\)\(\(\.[[0-9]]\{1,3\}\)\{0,2\}\).*$/\1\2/p' -e d` + SHLIB_LD="${SHLIB_LD} -current_version ${vers:-0} -compatibility_version ${vers:-0}" + SHLIB_SUFFIX=".dylib" + # Don't use -prebind when building for Mac OS X 10.4 or later only: + AS_IF([test "`echo "${MACOSX_DEPLOYMENT_TARGET}" | awk -F '10\\.' '{print int([$]2)}'`" -lt 4 -a \ + "`echo "${CPPFLAGS}" | awk -F '-mmacosx-version-min=10\\.' '{print int([$]2)}'`" -lt 4], [ + LDFLAGS="$LDFLAGS -prebind"]) + LDFLAGS="$LDFLAGS -headerpad_max_install_names" + AC_CACHE_CHECK([if ld accepts -search_paths_first flag], + tcl_cv_ld_search_paths_first, [ + hold_ldflags=$LDFLAGS + LDFLAGS="$LDFLAGS -Wl,-search_paths_first" + AC_TRY_LINK(, [int i;], tcl_cv_ld_search_paths_first=yes, + tcl_cv_ld_search_paths_first=no) + LDFLAGS=$hold_ldflags]) + AS_IF([test $tcl_cv_ld_search_paths_first = yes], [ + LDFLAGS="$LDFLAGS -Wl,-search_paths_first" + ]) + AS_IF([test "$tcl_cv_cc_visibility_hidden" != yes], [ + AC_DEFINE(MODULE_SCOPE, [__private_extern__], + [Compiler support for module scope symbols]) + tcl_cv_cc_visibility_hidden=yes + ]) + CC_SEARCH_FLAGS="" + LD_SEARCH_FLAGS="" + LD_LIBRARY_PATH_VAR="DYLD_LIBRARY_PATH" + # TEA specific: for combined 32 & 64 bit fat builds of Tk + # extensions, verify that 64-bit build is possible. + AS_IF([test "$fat_32_64" = yes && test -n "${TK_BIN_DIR}"], [ + AS_IF([test "${TEA_WINDOWINGSYSTEM}" = x11], [ + AC_CACHE_CHECK([for 64-bit X11], tcl_cv_lib_x11_64, [ + for v in CFLAGS CPPFLAGS LDFLAGS; do + eval 'hold_'$v'="$'$v'";'$v'="`echo "$'$v' "|sed -e "s/-arch ppc / /g" -e "s/-arch i386 / /g"`"' + done + CPPFLAGS="$CPPFLAGS -I/usr/X11R6/include" + LDFLAGS="$LDFLAGS -L/usr/X11R6/lib -lX11" + AC_TRY_LINK([#include ], [XrmInitialize();], + tcl_cv_lib_x11_64=yes, tcl_cv_lib_x11_64=no) + for v in CFLAGS CPPFLAGS LDFLAGS; do + eval $v'="$hold_'$v'"' + done]) + ]) + AS_IF([test "${TEA_WINDOWINGSYSTEM}" = aqua], [ + AC_CACHE_CHECK([for 64-bit Tk], tcl_cv_lib_tk_64, [ + for v in CFLAGS CPPFLAGS LDFLAGS; do + eval 'hold_'$v'="$'$v'";'$v'="`echo "$'$v' "|sed -e "s/-arch ppc / /g" -e "s/-arch i386 / /g"`"' + done + CPPFLAGS="$CPPFLAGS -DUSE_TCL_STUBS=1 -DUSE_TK_STUBS=1 ${TCL_INCLUDES} ${TK_INCLUDES}" + LDFLAGS="$LDFLAGS ${TCL_STUB_LIB_SPEC} ${TK_STUB_LIB_SPEC}" + AC_TRY_LINK([#include ], [Tk_InitStubs(NULL, "", 0);], + tcl_cv_lib_tk_64=yes, tcl_cv_lib_tk_64=no) + for v in CFLAGS CPPFLAGS LDFLAGS; do + eval $v'="$hold_'$v'"' + done]) + ]) + # remove 64-bit arch flags from CFLAGS et al. if configuration + # does not support 64-bit. + AS_IF([test "$tcl_cv_lib_tk_64" = no -o "$tcl_cv_lib_x11_64" = no], [ + AC_MSG_NOTICE([Removing 64-bit architectures from compiler & linker flags]) + for v in CFLAGS CPPFLAGS LDFLAGS; do + eval $v'="`echo "$'$v' "|sed -e "s/-arch ppc64 / /g" -e "s/-arch x86_64 / /g"`"' + done]) + ]) + ;; + OS/390-*) + CFLAGS_OPTIMIZE="" # Optimizer is buggy + AC_DEFINE(_OE_SOCKETS, 1, # needed in sys/socket.h + [Should OS/390 do the right thing with sockets?]) + ;; + OSF1-V*) + # Digital OSF/1 + SHLIB_CFLAGS="" + AS_IF([test "$SHARED_BUILD" = 1], [ + SHLIB_LD='ld -shared -expect_unresolved "*"' + ], [ + SHLIB_LD='ld -non_shared -expect_unresolved "*"' + ]) + SHLIB_SUFFIX=".so" + AS_IF([test $doRpath = yes], [ + CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}' + LD_SEARCH_FLAGS='-rpath ${LIB_RUNTIME_DIR}']) + AS_IF([test "$GCC" = yes], [CFLAGS="$CFLAGS -mieee"], [ + CFLAGS="$CFLAGS -DHAVE_TZSET -std1 -ieee"]) + # see pthread_intro(3) for pthread support on osf1, k.furukawa + AS_IF([test "${TCL_THREADS}" = 1], [ + CFLAGS="$CFLAGS -DHAVE_PTHREAD_ATTR_SETSTACKSIZE" + CFLAGS="$CFLAGS -DTCL_THREAD_STACK_MIN=PTHREAD_STACK_MIN*64" + LIBS=`echo $LIBS | sed s/-lpthreads//` + AS_IF([test "$GCC" = yes], [ + LIBS="$LIBS -lpthread -lmach -lexc" + ], [ + CFLAGS="$CFLAGS -pthread" + LDFLAGS="$LDFLAGS -pthread" + ]) + ]) + ;; + QNX-6*) + # QNX RTP + # This may work for all QNX, but it was only reported for v6. + SHLIB_CFLAGS="-fPIC" + SHLIB_LD="ld -Bshareable -x" + SHLIB_LD_LIBS="" + SHLIB_SUFFIX=".so" + CC_SEARCH_FLAGS="" + LD_SEARCH_FLAGS="" + ;; + SCO_SV-3.2*) + AS_IF([test "$GCC" = yes], [ + SHLIB_CFLAGS="-fPIC -melf" + LDFLAGS="$LDFLAGS -melf -Wl,-Bexport" + ], [ + SHLIB_CFLAGS="-Kpic -belf" + LDFLAGS="$LDFLAGS -belf -Wl,-Bexport" + ]) + SHLIB_LD="ld -G" + SHLIB_LD_LIBS="" + SHLIB_SUFFIX=".so" + CC_SEARCH_FLAGS="" + LD_SEARCH_FLAGS="" + ;; + SunOS-5.[[0-6]]) + # Careful to not let 5.10+ fall into this case + + # Note: If _REENTRANT isn't defined, then Solaris + # won't define thread-safe library routines. + + AC_DEFINE(_REENTRANT, 1, [Do we want the reentrant OS API?]) + AC_DEFINE(_POSIX_PTHREAD_SEMANTICS, 1, + [Do we really want to follow the standard? Yes we do!]) + + SHLIB_CFLAGS="-KPIC" + SHLIB_SUFFIX=".so" + AS_IF([test "$GCC" = yes], [ + SHLIB_LD='${CC} -shared' + CC_SEARCH_FLAGS='-Wl,-R,${LIB_RUNTIME_DIR}' + LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS} + ], [ + SHLIB_LD="/usr/ccs/bin/ld -G -z text" + CC_SEARCH_FLAGS='-R ${LIB_RUNTIME_DIR}' + LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS} + ]) + ;; + SunOS-5*) + # Note: If _REENTRANT isn't defined, then Solaris + # won't define thread-safe library routines. + + AC_DEFINE(_REENTRANT, 1, [Do we want the reentrant OS API?]) + AC_DEFINE(_POSIX_PTHREAD_SEMANTICS, 1, + [Do we really want to follow the standard? Yes we do!]) + + SHLIB_CFLAGS="-KPIC" + + # Check to enable 64-bit flags for compiler/linker + AS_IF([test "$do64bit" = yes], [ + arch=`isainfo` + AS_IF([test "$arch" = "sparcv9 sparc"], [ + AS_IF([test "$GCC" = yes], [ + AS_IF([test "`${CC} -dumpversion | awk -F. '{print [$]1}'`" -lt 3], [ + AC_MSG_WARN([64bit mode not supported with GCC < 3.2 on $system]) + ], [ + do64bit_ok=yes + CFLAGS="$CFLAGS -m64 -mcpu=v9" + LDFLAGS="$LDFLAGS -m64 -mcpu=v9" + SHLIB_CFLAGS="-fPIC" + ]) + ], [ + do64bit_ok=yes + AS_IF([test "$do64bitVIS" = yes], [ + CFLAGS="$CFLAGS -xarch=v9a" + LDFLAGS_ARCH="-xarch=v9a" + ], [ + CFLAGS="$CFLAGS -xarch=v9" + LDFLAGS_ARCH="-xarch=v9" + ]) + # Solaris 64 uses this as well + #LD_LIBRARY_PATH_VAR="LD_LIBRARY_PATH_64" + ]) + ], [AS_IF([test "$arch" = "amd64 i386"], [ + AS_IF([test "$GCC" = yes], [ + case $system in + SunOS-5.1[[1-9]]*|SunOS-5.[[2-9]][[0-9]]*) + do64bit_ok=yes + CFLAGS="$CFLAGS -m64" + LDFLAGS="$LDFLAGS -m64";; + *) + AC_MSG_WARN([64bit mode not supported with GCC on $system]);; + esac + ], [ + do64bit_ok=yes + case $system in + SunOS-5.1[[1-9]]*|SunOS-5.[[2-9]][[0-9]]*) + CFLAGS="$CFLAGS -m64" + LDFLAGS="$LDFLAGS -m64";; + *) + CFLAGS="$CFLAGS -xarch=amd64" + LDFLAGS="$LDFLAGS -xarch=amd64";; + esac + ]) + ], [AC_MSG_WARN([64bit mode not supported for $arch])])]) + ]) + + SHLIB_SUFFIX=".so" + AS_IF([test "$GCC" = yes], [ + SHLIB_LD='${CC} -shared' + CC_SEARCH_FLAGS='-Wl,-R,${LIB_RUNTIME_DIR}' + LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS} + AS_IF([test "$do64bit_ok" = yes], [ + AS_IF([test "$arch" = "sparcv9 sparc"], [ + # We need to specify -static-libgcc or we need to + # add the path to the sparv9 libgcc. + # JH: static-libgcc is necessary for core Tcl, but may + # not be necessary for extensions. + SHLIB_LD="$SHLIB_LD -m64 -mcpu=v9 -static-libgcc" + # for finding sparcv9 libgcc, get the regular libgcc + # path, remove so name and append 'sparcv9' + #v9gcclibdir="`gcc -print-file-name=libgcc_s.so` | ..." + #CC_SEARCH_FLAGS="${CC_SEARCH_FLAGS},-R,$v9gcclibdir" + ], [AS_IF([test "$arch" = "amd64 i386"], [ + # JH: static-libgcc is necessary for core Tcl, but may + # not be necessary for extensions. + SHLIB_LD="$SHLIB_LD -m64 -static-libgcc" + ])]) + ]) + ], [ + case $system in + SunOS-5.[[1-9]][[0-9]]*) + # TEA specific: use LDFLAGS_DEFAULT instead of LDFLAGS + SHLIB_LD='${CC} -G -z text ${LDFLAGS_DEFAULT}';; + *) + SHLIB_LD='/usr/ccs/bin/ld -G -z text';; + esac + CC_SEARCH_FLAGS='-Wl,-R,${LIB_RUNTIME_DIR}' + LD_SEARCH_FLAGS='-R ${LIB_RUNTIME_DIR}' + ]) + ;; + UNIX_SV* | UnixWare-5*) + SHLIB_CFLAGS="-KPIC" + SHLIB_LD='${CC} -G' + SHLIB_LD_LIBS="" + SHLIB_SUFFIX=".so" + # Some UNIX_SV* systems (unixware 1.1.2 for example) have linkers + # that don't grok the -Bexport option. Test that it does. + AC_CACHE_CHECK([for ld accepts -Bexport flag], tcl_cv_ld_Bexport, [ + hold_ldflags=$LDFLAGS + LDFLAGS="$LDFLAGS -Wl,-Bexport" + AC_TRY_LINK(, [int i;], tcl_cv_ld_Bexport=yes, tcl_cv_ld_Bexport=no) + LDFLAGS=$hold_ldflags]) + AS_IF([test $tcl_cv_ld_Bexport = yes], [ + LDFLAGS="$LDFLAGS -Wl,-Bexport" + ]) + CC_SEARCH_FLAGS="" + LD_SEARCH_FLAGS="" + ;; + esac + + AS_IF([test "$do64bit" = yes -a "$do64bit_ok" = no], [ + AC_MSG_WARN([64bit support being disabled -- don't know magic for this platform]) + ]) + +dnl # Add any CPPFLAGS set in the environment to our CFLAGS, but delay doing so +dnl # until the end of configure, as configure's compile and link tests use +dnl # both CPPFLAGS and CFLAGS (unlike our compile and link) but configure's +dnl # preprocessing tests use only CPPFLAGS. + AC_CONFIG_COMMANDS_PRE([CFLAGS="${CFLAGS} ${CPPFLAGS}"; CPPFLAGS=""]) + + # Add in the arch flags late to ensure it wasn't removed. + # Not necessary in TEA, but this is aligned with core + LDFLAGS="$LDFLAGS $LDFLAGS_ARCH" + + # If we're running gcc, then change the C flags for compiling shared + # libraries to the right flags for gcc, instead of those for the + # standard manufacturer compiler. + + AS_IF([test "$GCC" = yes], [ + case $system in + AIX-*) ;; + BSD/OS*) ;; + CYGWIN_*|MINGW32_*) ;; + IRIX*) ;; + NetBSD-*|FreeBSD-*|OpenBSD-*) ;; + Darwin-*) ;; + SCO_SV-3.2*) ;; + windows) ;; + *) SHLIB_CFLAGS="-fPIC" ;; + esac]) + + AS_IF([test "$tcl_cv_cc_visibility_hidden" != yes], [ + AC_DEFINE(MODULE_SCOPE, [extern], + [No Compiler support for module scope symbols]) + ]) + + AS_IF([test "$SHARED_LIB_SUFFIX" = ""], [ + # TEA specific: use PACKAGE_VERSION instead of VERSION + SHARED_LIB_SUFFIX='${PACKAGE_VERSION}${SHLIB_SUFFIX}']) + AS_IF([test "$UNSHARED_LIB_SUFFIX" = ""], [ + # TEA specific: use PACKAGE_VERSION instead of VERSION + UNSHARED_LIB_SUFFIX='${PACKAGE_VERSION}.a']) + + if test "${GCC}" = "yes" -a ${SHLIB_SUFFIX} = ".dll"; then + AC_CACHE_CHECK(for SEH support in compiler, + tcl_cv_seh, + AC_TRY_RUN([ +#define WIN32_LEAN_AND_MEAN +#include +#undef WIN32_LEAN_AND_MEAN + + int main(int argc, char** argv) { + int a, b = 0; + __try { + a = 666 / b; + } + __except (EXCEPTION_EXECUTE_HANDLER) { + return 0; + } + return 1; + } + ], + tcl_cv_seh=yes, + tcl_cv_seh=no, + tcl_cv_seh=no) + ) + if test "$tcl_cv_seh" = "no" ; then + AC_DEFINE(HAVE_NO_SEH, 1, + [Defined when mingw does not support SEH]) + fi + + # + # Check to see if the excpt.h include file provided contains the + # definition for EXCEPTION_DISPOSITION; if not, which is the case + # with Cygwin's version as of 2002-04-10, define it to be int, + # sufficient for getting the current code to work. + # + AC_CACHE_CHECK(for EXCEPTION_DISPOSITION support in include files, + tcl_cv_eh_disposition, + AC_TRY_COMPILE([ +# define WIN32_LEAN_AND_MEAN +# include +# undef WIN32_LEAN_AND_MEAN + ],[ + EXCEPTION_DISPOSITION x; + ], + tcl_cv_eh_disposition=yes, + tcl_cv_eh_disposition=no) + ) + if test "$tcl_cv_eh_disposition" = "no" ; then + AC_DEFINE(EXCEPTION_DISPOSITION, int, + [Defined when cygwin/mingw does not support EXCEPTION DISPOSITION]) + fi + + # Check to see if winnt.h defines CHAR, SHORT, and LONG + # even if VOID has already been #defined. The win32api + # used by mingw and cygwin is known to do this. + + AC_CACHE_CHECK(for winnt.h that ignores VOID define, + tcl_cv_winnt_ignore_void, + AC_TRY_COMPILE([ +#define VOID void +#define WIN32_LEAN_AND_MEAN +#include +#undef WIN32_LEAN_AND_MEAN + ], [ + CHAR c; + SHORT s; + LONG l; + ], + tcl_cv_winnt_ignore_void=yes, + tcl_cv_winnt_ignore_void=no) + ) + if test "$tcl_cv_winnt_ignore_void" = "yes" ; then + AC_DEFINE(HAVE_WINNT_IGNORE_VOID, 1, + [Defined when cygwin/mingw ignores VOID define in winnt.h]) + fi + fi + + # See if the compiler supports casting to a union type. + # This is used to stop gcc from printing a compiler + # warning when initializing a union member. + + AC_CACHE_CHECK(for cast to union support, + tcl_cv_cast_to_union, + AC_TRY_COMPILE([], + [ + union foo { int i; double d; }; + union foo f = (union foo) (int) 0; + ], + tcl_cv_cast_to_union=yes, + tcl_cv_cast_to_union=no) + ) + if test "$tcl_cv_cast_to_union" = "yes"; then + AC_DEFINE(HAVE_CAST_TO_UNION, 1, + [Defined when compiler supports casting to union type.]) + fi + + AC_SUBST(CFLAGS_DEBUG) + AC_SUBST(CFLAGS_OPTIMIZE) + AC_SUBST(CFLAGS_WARNING) + + AC_SUBST(STLIB_LD) + AC_SUBST(SHLIB_LD) + + AC_SUBST(SHLIB_LD_LIBS) + AC_SUBST(SHLIB_CFLAGS) + + AC_SUBST(LD_LIBRARY_PATH_VAR) + + # These must be called after we do the basic CFLAGS checks and + # verify any possible 64-bit or similar switches are necessary + TEA_TCL_EARLY_FLAGS + TEA_TCL_64BIT_FLAGS +]) + +#-------------------------------------------------------------------- +# TEA_SERIAL_PORT +# +# Determine which interface to use to talk to the serial port. +# Note that #include lines must begin in leftmost column for +# some compilers to recognize them as preprocessor directives, +# and some build environments have stdin not pointing at a +# pseudo-terminal (usually /dev/null instead.) +# +# Arguments: +# none +# +# Results: +# +# Defines only one of the following vars: +# HAVE_SYS_MODEM_H +# USE_TERMIOS +# USE_TERMIO +# USE_SGTTY +#-------------------------------------------------------------------- + +AC_DEFUN([TEA_SERIAL_PORT], [ + AC_CHECK_HEADERS(sys/modem.h) + AC_CACHE_CHECK([termios vs. termio vs. sgtty], tcl_cv_api_serial, [ + AC_TRY_RUN([ +#include + +int main() { + struct termios t; + if (tcgetattr(0, &t) == 0) { + cfsetospeed(&t, 0); + t.c_cflag |= PARENB | PARODD | CSIZE | CSTOPB; + return 0; + } + return 1; +}], tcl_cv_api_serial=termios, tcl_cv_api_serial=no, tcl_cv_api_serial=no) + if test $tcl_cv_api_serial = no ; then + AC_TRY_RUN([ +#include + +int main() { + struct termio t; + if (ioctl(0, TCGETA, &t) == 0) { + t.c_cflag |= CBAUD | PARENB | PARODD | CSIZE | CSTOPB; + return 0; + } + return 1; +}], tcl_cv_api_serial=termio, tcl_cv_api_serial=no, tcl_cv_api_serial=no) + fi + if test $tcl_cv_api_serial = no ; then + AC_TRY_RUN([ +#include + +int main() { + struct sgttyb t; + if (ioctl(0, TIOCGETP, &t) == 0) { + t.sg_ospeed = 0; + t.sg_flags |= ODDP | EVENP | RAW; + return 0; + } + return 1; +}], tcl_cv_api_serial=sgtty, tcl_cv_api_serial=no, tcl_cv_api_serial=no) + fi + if test $tcl_cv_api_serial = no ; then + AC_TRY_RUN([ +#include +#include + +int main() { + struct termios t; + if (tcgetattr(0, &t) == 0 + || errno == ENOTTY || errno == ENXIO || errno == EINVAL) { + cfsetospeed(&t, 0); + t.c_cflag |= PARENB | PARODD | CSIZE | CSTOPB; + return 0; + } + return 1; +}], tcl_cv_api_serial=termios, tcl_cv_api_serial=no, tcl_cv_api_serial=no) + fi + if test $tcl_cv_api_serial = no; then + AC_TRY_RUN([ +#include +#include + +int main() { + struct termio t; + if (ioctl(0, TCGETA, &t) == 0 + || errno == ENOTTY || errno == ENXIO || errno == EINVAL) { + t.c_cflag |= CBAUD | PARENB | PARODD | CSIZE | CSTOPB; + return 0; + } + return 1; + }], tcl_cv_api_serial=termio, tcl_cv_api_serial=no, tcl_cv_api_serial=no) + fi + if test $tcl_cv_api_serial = no; then + AC_TRY_RUN([ +#include +#include + +int main() { + struct sgttyb t; + if (ioctl(0, TIOCGETP, &t) == 0 + || errno == ENOTTY || errno == ENXIO || errno == EINVAL) { + t.sg_ospeed = 0; + t.sg_flags |= ODDP | EVENP | RAW; + return 0; + } + return 1; +}], tcl_cv_api_serial=sgtty, tcl_cv_api_serial=none, tcl_cv_api_serial=none) + fi]) + case $tcl_cv_api_serial in + termios) AC_DEFINE(USE_TERMIOS, 1, [Use the termios API for serial lines]);; + termio) AC_DEFINE(USE_TERMIO, 1, [Use the termio API for serial lines]);; + sgtty) AC_DEFINE(USE_SGTTY, 1, [Use the sgtty API for serial lines]);; + esac +]) + +#-------------------------------------------------------------------- +# TEA_MISSING_POSIX_HEADERS +# +# Supply substitutes for missing POSIX header files. Special +# notes: +# - stdlib.h doesn't define strtol, strtoul, or +# strtod in some versions of SunOS +# - some versions of string.h don't declare procedures such +# as strstr +# +# Arguments: +# none +# +# Results: +# +# Defines some of the following vars: +# NO_DIRENT_H +# NO_ERRNO_H +# NO_VALUES_H +# HAVE_LIMITS_H or NO_LIMITS_H +# NO_STDLIB_H +# NO_STRING_H +# NO_SYS_WAIT_H +# NO_DLFCN_H +# HAVE_SYS_PARAM_H +# +# HAVE_STRING_H ? +# +# tkUnixPort.h checks for HAVE_LIMITS_H, so do both HAVE and +# CHECK on limits.h +#-------------------------------------------------------------------- + +AC_DEFUN([TEA_MISSING_POSIX_HEADERS], [ + AC_CACHE_CHECK([dirent.h], tcl_cv_dirent_h, [ + AC_TRY_LINK([#include +#include ], [ +#ifndef _POSIX_SOURCE +# ifdef __Lynx__ + /* + * Generate compilation error to make the test fail: Lynx headers + * are only valid if really in the POSIX environment. + */ + + missing_procedure(); +# endif +#endif +DIR *d; +struct dirent *entryPtr; +char *p; +d = opendir("foobar"); +entryPtr = readdir(d); +p = entryPtr->d_name; +closedir(d); +], tcl_cv_dirent_h=yes, tcl_cv_dirent_h=no)]) + + if test $tcl_cv_dirent_h = no; then + AC_DEFINE(NO_DIRENT_H, 1, [Do we have ?]) + fi + + # TEA specific: + AC_CHECK_HEADER(errno.h, , [AC_DEFINE(NO_ERRNO_H, 1, [Do we have ?])]) + AC_CHECK_HEADER(float.h, , [AC_DEFINE(NO_FLOAT_H, 1, [Do we have ?])]) + AC_CHECK_HEADER(values.h, , [AC_DEFINE(NO_VALUES_H, 1, [Do we have ?])]) + AC_CHECK_HEADER(limits.h, + [AC_DEFINE(HAVE_LIMITS_H, 1, [Do we have ?])], + [AC_DEFINE(NO_LIMITS_H, 1, [Do we have ?])]) + AC_CHECK_HEADER(stdlib.h, tcl_ok=1, tcl_ok=0) + AC_EGREP_HEADER(strtol, stdlib.h, , tcl_ok=0) + AC_EGREP_HEADER(strtoul, stdlib.h, , tcl_ok=0) + AC_EGREP_HEADER(strtod, stdlib.h, , tcl_ok=0) + if test $tcl_ok = 0; then + AC_DEFINE(NO_STDLIB_H, 1, [Do we have ?]) + fi + AC_CHECK_HEADER(string.h, tcl_ok=1, tcl_ok=0) + AC_EGREP_HEADER(strstr, string.h, , tcl_ok=0) + AC_EGREP_HEADER(strerror, string.h, , tcl_ok=0) + + # See also memmove check below for a place where NO_STRING_H can be + # set and why. + + if test $tcl_ok = 0; then + AC_DEFINE(NO_STRING_H, 1, [Do we have ?]) + fi + + AC_CHECK_HEADER(sys/wait.h, , [AC_DEFINE(NO_SYS_WAIT_H, 1, [Do we have ?])]) + AC_CHECK_HEADER(dlfcn.h, , [AC_DEFINE(NO_DLFCN_H, 1, [Do we have ?])]) + + # OS/390 lacks sys/param.h (and doesn't need it, by chance). + AC_HAVE_HEADERS(sys/param.h) +]) + +#-------------------------------------------------------------------- +# TEA_PATH_X +# +# Locate the X11 header files and the X11 library archive. Try +# the ac_path_x macro first, but if it doesn't find the X stuff +# (e.g. because there's no xmkmf program) then check through +# a list of possible directories. Under some conditions the +# autoconf macro will return an include directory that contains +# no include files, so double-check its result just to be safe. +# +# This should be called after TEA_CONFIG_CFLAGS as setting the +# LIBS line can confuse some configure macro magic. +# +# Arguments: +# none +# +# Results: +# +# Sets the following vars: +# XINCLUDES +# XLIBSW +# PKG_LIBS (appends to) +#-------------------------------------------------------------------- + +AC_DEFUN([TEA_PATH_X], [ + if test "${TEA_WINDOWINGSYSTEM}" = "x11" ; then + TEA_PATH_UNIX_X + fi +]) + +AC_DEFUN([TEA_PATH_UNIX_X], [ + AC_PATH_X + not_really_there="" + if test "$no_x" = ""; then + if test "$x_includes" = ""; then + AC_TRY_CPP([#include ], , not_really_there="yes") + else + if test ! -r $x_includes/X11/Xlib.h; then + not_really_there="yes" + fi + fi + fi + if test "$no_x" = "yes" -o "$not_really_there" = "yes"; then + AC_MSG_CHECKING([for X11 header files]) + found_xincludes="no" + AC_TRY_CPP([#include ], found_xincludes="yes", found_xincludes="no") + if test "$found_xincludes" = "no"; then + dirs="/usr/unsupported/include /usr/local/include /usr/X386/include /usr/X11R6/include /usr/X11R5/include /usr/include/X11R5 /usr/include/X11R4 /usr/openwin/include /usr/X11/include /usr/sww/include" + for i in $dirs ; do + if test -r $i/X11/Xlib.h; then + AC_MSG_RESULT([$i]) + XINCLUDES=" -I$i" + found_xincludes="yes" + break + fi + done + fi + else + if test "$x_includes" != ""; then + XINCLUDES="-I$x_includes" + found_xincludes="yes" + fi + fi + if test "$found_xincludes" = "no"; then + AC_MSG_RESULT([couldn't find any!]) + fi + + if test "$no_x" = yes; then + AC_MSG_CHECKING([for X11 libraries]) + XLIBSW=nope + dirs="/usr/unsupported/lib /usr/local/lib /usr/X386/lib /usr/X11R6/lib /usr/X11R5/lib /usr/lib/X11R5 /usr/lib/X11R4 /usr/openwin/lib /usr/X11/lib /usr/sww/X11/lib" + for i in $dirs ; do + if test -r $i/libX11.a -o -r $i/libX11.so -o -r $i/libX11.sl -o -r $i/libX11.dylib; then + AC_MSG_RESULT([$i]) + XLIBSW="-L$i -lX11" + x_libraries="$i" + break + fi + done + else + if test "$x_libraries" = ""; then + XLIBSW=-lX11 + else + XLIBSW="-L$x_libraries -lX11" + fi + fi + if test "$XLIBSW" = nope ; then + AC_CHECK_LIB(Xwindow, XCreateWindow, XLIBSW=-lXwindow) + fi + if test "$XLIBSW" = nope ; then + AC_MSG_RESULT([could not find any! Using -lX11.]) + XLIBSW=-lX11 + fi + # TEA specific: + if test x"${XLIBSW}" != x ; then + PKG_LIBS="${PKG_LIBS} ${XLIBSW}" + fi +]) + +#-------------------------------------------------------------------- +# TEA_BLOCKING_STYLE +# +# The statements below check for systems where POSIX-style +# non-blocking I/O (O_NONBLOCK) doesn't work or is unimplemented. +# On these systems (mostly older ones), use the old BSD-style +# FIONBIO approach instead. +# +# Arguments: +# none +# +# Results: +# +# Defines some of the following vars: +# HAVE_SYS_IOCTL_H +# HAVE_SYS_FILIO_H +# USE_FIONBIO +# O_NONBLOCK +#-------------------------------------------------------------------- + +AC_DEFUN([TEA_BLOCKING_STYLE], [ + AC_CHECK_HEADERS(sys/ioctl.h) + AC_CHECK_HEADERS(sys/filio.h) + TEA_CONFIG_SYSTEM + AC_MSG_CHECKING([FIONBIO vs. O_NONBLOCK for nonblocking I/O]) + case $system in + OSF*) + AC_DEFINE(USE_FIONBIO, 1, [Should we use FIONBIO?]) + AC_MSG_RESULT([FIONBIO]) + ;; + *) + AC_MSG_RESULT([O_NONBLOCK]) + ;; + esac +]) + +#-------------------------------------------------------------------- +# TEA_TIME_HANDLER +# +# Checks how the system deals with time.h, what time structures +# are used on the system, and what fields the structures have. +# +# Arguments: +# none +# +# Results: +# +# Defines some of the following vars: +# USE_DELTA_FOR_TZ +# HAVE_TM_GMTOFF +# HAVE_TM_TZADJ +# HAVE_TIMEZONE_VAR +#-------------------------------------------------------------------- + +AC_DEFUN([TEA_TIME_HANDLER], [ + AC_CHECK_HEADERS(sys/time.h) + AC_HEADER_TIME + AC_STRUCT_TIMEZONE + + AC_CHECK_FUNCS(gmtime_r localtime_r) + + AC_CACHE_CHECK([tm_tzadj in struct tm], tcl_cv_member_tm_tzadj, [ + AC_TRY_COMPILE([#include ], [struct tm tm; tm.tm_tzadj;], + tcl_cv_member_tm_tzadj=yes, tcl_cv_member_tm_tzadj=no)]) + if test $tcl_cv_member_tm_tzadj = yes ; then + AC_DEFINE(HAVE_TM_TZADJ, 1, [Should we use the tm_tzadj field of struct tm?]) + fi + + AC_CACHE_CHECK([tm_gmtoff in struct tm], tcl_cv_member_tm_gmtoff, [ + AC_TRY_COMPILE([#include ], [struct tm tm; tm.tm_gmtoff;], + tcl_cv_member_tm_gmtoff=yes, tcl_cv_member_tm_gmtoff=no)]) + if test $tcl_cv_member_tm_gmtoff = yes ; then + AC_DEFINE(HAVE_TM_GMTOFF, 1, [Should we use the tm_gmtoff field of struct tm?]) + fi + + # + # Its important to include time.h in this check, as some systems + # (like convex) have timezone functions, etc. + # + AC_CACHE_CHECK([long timezone variable], tcl_cv_timezone_long, [ + AC_TRY_COMPILE([#include ], + [extern long timezone; + timezone += 1; + exit (0);], + tcl_cv_timezone_long=yes, tcl_cv_timezone_long=no)]) + if test $tcl_cv_timezone_long = yes ; then + AC_DEFINE(HAVE_TIMEZONE_VAR, 1, [Should we use the global timezone variable?]) + else + # + # On some systems (eg IRIX 6.2), timezone is a time_t and not a long. + # + AC_CACHE_CHECK([time_t timezone variable], tcl_cv_timezone_time, [ + AC_TRY_COMPILE([#include ], + [extern time_t timezone; + timezone += 1; + exit (0);], + tcl_cv_timezone_time=yes, tcl_cv_timezone_time=no)]) + if test $tcl_cv_timezone_time = yes ; then + AC_DEFINE(HAVE_TIMEZONE_VAR, 1, [Should we use the global timezone variable?]) + fi + fi +]) + +#-------------------------------------------------------------------- +# TEA_BUGGY_STRTOD +# +# Under Solaris 2.4, strtod returns the wrong value for the +# terminating character under some conditions. Check for this +# and if the problem exists use a substitute procedure +# "fixstrtod" (provided by Tcl) that corrects the error. +# Also, on Compaq's Tru64 Unix 5.0, +# strtod(" ") returns 0.0 instead of a failure to convert. +# +# Arguments: +# none +# +# Results: +# +# Might defines some of the following vars: +# strtod (=fixstrtod) +#-------------------------------------------------------------------- + +AC_DEFUN([TEA_BUGGY_STRTOD], [ + AC_CHECK_FUNC(strtod, tcl_strtod=1, tcl_strtod=0) + if test "$tcl_strtod" = 1; then + AC_CACHE_CHECK([for Solaris2.4/Tru64 strtod bugs], tcl_cv_strtod_buggy,[ + AC_TRY_RUN([ + extern double strtod(); + int main() { + char *infString="Inf", *nanString="NaN", *spaceString=" "; + char *term; + double value; + value = strtod(infString, &term); + if ((term != infString) && (term[-1] == 0)) { + exit(1); + } + value = strtod(nanString, &term); + if ((term != nanString) && (term[-1] == 0)) { + exit(1); + } + value = strtod(spaceString, &term); + if (term == (spaceString+1)) { + exit(1); + } + exit(0); + }], tcl_cv_strtod_buggy=ok, tcl_cv_strtod_buggy=buggy, + tcl_cv_strtod_buggy=buggy)]) + if test "$tcl_cv_strtod_buggy" = buggy; then + AC_LIBOBJ([fixstrtod]) + USE_COMPAT=1 + AC_DEFINE(strtod, fixstrtod, [Do we want to use the strtod() in compat?]) + fi + fi +]) + +#-------------------------------------------------------------------- +# TEA_TCL_LINK_LIBS +# +# Search for the libraries needed to link the Tcl shell. +# Things like the math library (-lm) and socket stuff (-lsocket vs. +# -lnsl) are dealt with here. +# +# Arguments: +# Requires the following vars to be set in the Makefile: +# DL_LIBS (not in TEA, only needed in core) +# LIBS +# MATH_LIBS +# +# Results: +# +# Substitutes the following vars: +# TCL_LIBS +# MATH_LIBS +# +# Might append to the following vars: +# LIBS +# +# Might define the following vars: +# HAVE_NET_ERRNO_H +#-------------------------------------------------------------------- + +AC_DEFUN([TEA_TCL_LINK_LIBS], [ + #-------------------------------------------------------------------- + # On a few very rare systems, all of the libm.a stuff is + # already in libc.a. Set compiler flags accordingly. + # Also, Linux requires the "ieee" library for math to work + # right (and it must appear before "-lm"). + #-------------------------------------------------------------------- + + AC_CHECK_FUNC(sin, MATH_LIBS="", MATH_LIBS="-lm") + AC_CHECK_LIB(ieee, main, [MATH_LIBS="-lieee $MATH_LIBS"]) + + #-------------------------------------------------------------------- + # Interactive UNIX requires -linet instead of -lsocket, plus it + # needs net/errno.h to define the socket-related error codes. + #-------------------------------------------------------------------- + + AC_CHECK_LIB(inet, main, [LIBS="$LIBS -linet"]) + AC_CHECK_HEADER(net/errno.h, [ + AC_DEFINE(HAVE_NET_ERRNO_H, 1, [Do we have ?])]) + + #-------------------------------------------------------------------- + # Check for the existence of the -lsocket and -lnsl libraries. + # The order here is important, so that they end up in the right + # order in the command line generated by make. Here are some + # special considerations: + # 1. Use "connect" and "accept" to check for -lsocket, and + # "gethostbyname" to check for -lnsl. + # 2. Use each function name only once: can't redo a check because + # autoconf caches the results of the last check and won't redo it. + # 3. Use -lnsl and -lsocket only if they supply procedures that + # aren't already present in the normal libraries. This is because + # IRIX 5.2 has libraries, but they aren't needed and they're + # bogus: they goof up name resolution if used. + # 4. On some SVR4 systems, can't use -lsocket without -lnsl too. + # To get around this problem, check for both libraries together + # if -lsocket doesn't work by itself. + #-------------------------------------------------------------------- + + tcl_checkBoth=0 + AC_CHECK_FUNC(connect, tcl_checkSocket=0, tcl_checkSocket=1) + if test "$tcl_checkSocket" = 1; then + AC_CHECK_FUNC(setsockopt, , [AC_CHECK_LIB(socket, setsockopt, + LIBS="$LIBS -lsocket", tcl_checkBoth=1)]) + fi + if test "$tcl_checkBoth" = 1; then + tk_oldLibs=$LIBS + LIBS="$LIBS -lsocket -lnsl" + AC_CHECK_FUNC(accept, tcl_checkNsl=0, [LIBS=$tk_oldLibs]) + fi + AC_CHECK_FUNC(gethostbyname, , [AC_CHECK_LIB(nsl, gethostbyname, + [LIBS="$LIBS -lnsl"])]) + + # TEA specific: Don't perform the eval of the libraries here because + # DL_LIBS won't be set until we call TEA_CONFIG_CFLAGS + + TCL_LIBS='${DL_LIBS} ${LIBS} ${MATH_LIBS}' + AC_SUBST(TCL_LIBS) + AC_SUBST(MATH_LIBS) +]) + +#-------------------------------------------------------------------- +# TEA_TCL_EARLY_FLAGS +# +# Check for what flags are needed to be passed so the correct OS +# features are available. +# +# Arguments: +# None +# +# Results: +# +# Might define the following vars: +# _ISOC99_SOURCE +# _LARGEFILE64_SOURCE +# _LARGEFILE_SOURCE64 +#-------------------------------------------------------------------- + +AC_DEFUN([TEA_TCL_EARLY_FLAG],[ + AC_CACHE_VAL([tcl_cv_flag_]translit($1,[A-Z],[a-z]), + AC_TRY_COMPILE([$2], $3, [tcl_cv_flag_]translit($1,[A-Z],[a-z])=no, + AC_TRY_COMPILE([[#define ]$1[ 1 +]$2], $3, + [tcl_cv_flag_]translit($1,[A-Z],[a-z])=yes, + [tcl_cv_flag_]translit($1,[A-Z],[a-z])=no))) + if test ["x${tcl_cv_flag_]translit($1,[A-Z],[a-z])[}" = "xyes"] ; then + AC_DEFINE($1, 1, [Add the ]$1[ flag when building]) + tcl_flags="$tcl_flags $1" + fi +]) + +AC_DEFUN([TEA_TCL_EARLY_FLAGS],[ + AC_MSG_CHECKING([for required early compiler flags]) + tcl_flags="" + TEA_TCL_EARLY_FLAG(_ISOC99_SOURCE,[#include ], + [char *p = (char *)strtoll; char *q = (char *)strtoull;]) + TEA_TCL_EARLY_FLAG(_LARGEFILE64_SOURCE,[#include ], + [struct stat64 buf; int i = stat64("/", &buf);]) + TEA_TCL_EARLY_FLAG(_LARGEFILE_SOURCE64,[#include ], + [char *p = (char *)open64;]) + if test "x${tcl_flags}" = "x" ; then + AC_MSG_RESULT([none]) + else + AC_MSG_RESULT([${tcl_flags}]) + fi +]) + +#-------------------------------------------------------------------- +# TEA_TCL_64BIT_FLAGS +# +# Check for what is defined in the way of 64-bit features. +# +# Arguments: +# None +# +# Results: +# +# Might define the following vars: +# TCL_WIDE_INT_IS_LONG +# TCL_WIDE_INT_TYPE +# HAVE_STRUCT_DIRENT64 +# HAVE_STRUCT_STAT64 +# HAVE_TYPE_OFF64_T +#-------------------------------------------------------------------- + +AC_DEFUN([TEA_TCL_64BIT_FLAGS], [ + AC_MSG_CHECKING([for 64-bit integer type]) + AC_CACHE_VAL(tcl_cv_type_64bit,[ + tcl_cv_type_64bit=none + # See if the compiler knows natively about __int64 + AC_TRY_COMPILE(,[__int64 value = (__int64) 0;], + tcl_type_64bit=__int64, tcl_type_64bit="long long") + # See if we should use long anyway Note that we substitute in the + # type that is our current guess for a 64-bit type inside this check + # program, so it should be modified only carefully... + AC_TRY_COMPILE(,[switch (0) { + case 1: case (sizeof(]${tcl_type_64bit}[)==sizeof(long)): ; + }],tcl_cv_type_64bit=${tcl_type_64bit})]) + if test "${tcl_cv_type_64bit}" = none ; then + AC_DEFINE(TCL_WIDE_INT_IS_LONG, 1, [Are wide integers to be implemented with C 'long's?]) + AC_MSG_RESULT([using long]) + elif test "${tcl_cv_type_64bit}" = "__int64" \ + -a "${TEA_PLATFORM}" = "windows" ; then + # TEA specific: We actually want to use the default tcl.h checks in + # this case to handle both TCL_WIDE_INT_TYPE and TCL_LL_MODIFIER* + AC_MSG_RESULT([using Tcl header defaults]) + else + AC_DEFINE_UNQUOTED(TCL_WIDE_INT_TYPE,${tcl_cv_type_64bit}, + [What type should be used to define wide integers?]) + AC_MSG_RESULT([${tcl_cv_type_64bit}]) + + # Now check for auxiliary declarations + AC_CACHE_CHECK([for struct dirent64], tcl_cv_struct_dirent64,[ + AC_TRY_COMPILE([#include +#include ],[struct dirent64 p;], + tcl_cv_struct_dirent64=yes,tcl_cv_struct_dirent64=no)]) + if test "x${tcl_cv_struct_dirent64}" = "xyes" ; then + AC_DEFINE(HAVE_STRUCT_DIRENT64, 1, [Is 'struct dirent64' in ?]) + fi + + AC_CACHE_CHECK([for struct stat64], tcl_cv_struct_stat64,[ + AC_TRY_COMPILE([#include ],[struct stat64 p; +], + tcl_cv_struct_stat64=yes,tcl_cv_struct_stat64=no)]) + if test "x${tcl_cv_struct_stat64}" = "xyes" ; then + AC_DEFINE(HAVE_STRUCT_STAT64, 1, [Is 'struct stat64' in ?]) + fi + + AC_CHECK_FUNCS(open64 lseek64) + AC_MSG_CHECKING([for off64_t]) + AC_CACHE_VAL(tcl_cv_type_off64_t,[ + AC_TRY_COMPILE([#include ],[off64_t offset; +], + tcl_cv_type_off64_t=yes,tcl_cv_type_off64_t=no)]) + dnl Define HAVE_TYPE_OFF64_T only when the off64_t type and the + dnl functions lseek64 and open64 are defined. + if test "x${tcl_cv_type_off64_t}" = "xyes" && \ + test "x${ac_cv_func_lseek64}" = "xyes" && \ + test "x${ac_cv_func_open64}" = "xyes" ; then + AC_DEFINE(HAVE_TYPE_OFF64_T, 1, [Is off64_t in ?]) + AC_MSG_RESULT([yes]) + else + AC_MSG_RESULT([no]) + fi + fi +]) + +## +## Here ends the standard Tcl configuration bits and starts the +## TEA specific functions +## + +#------------------------------------------------------------------------ +# TEA_INIT -- +# +# Init various Tcl Extension Architecture (TEA) variables. +# This should be the first called TEA_* macro. +# +# Arguments: +# none +# +# Results: +# +# Defines and substs the following vars: +# CYGPATH +# EXEEXT +# Defines only: +# TEA_VERSION +# TEA_INITED +# TEA_PLATFORM (windows or unix) +# +# "cygpath" is used on windows to generate native path names for include +# files. These variables should only be used with the compiler and linker +# since they generate native path names. +# +# EXEEXT +# Select the executable extension based on the host type. This +# is a lightweight replacement for AC_EXEEXT that doesn't require +# a compiler. +#------------------------------------------------------------------------ + +AC_DEFUN([TEA_INIT], [ + # TEA extensions pass this us the version of TEA they think they + # are compatible with. + TEA_VERSION="3.9" + + AC_MSG_CHECKING([for correct TEA configuration]) + if test x"${PACKAGE_NAME}" = x ; then + AC_MSG_ERROR([ +The PACKAGE_NAME variable must be defined by your TEA configure.in]) + fi + if test x"$1" = x ; then + AC_MSG_ERROR([ +TEA version not specified.]) + elif test "$1" != "${TEA_VERSION}" ; then + AC_MSG_RESULT([warning: requested TEA version "$1", have "${TEA_VERSION}"]) + else + AC_MSG_RESULT([ok (TEA ${TEA_VERSION})]) + fi + + # If the user did not set CFLAGS, set it now to keep macros + # like AC_PROG_CC and AC_TRY_COMPILE from adding "-g -O2". + if test "${CFLAGS+set}" != "set" ; then + CFLAGS="" + fi + + case "`uname -s`" in + *win32*|*WIN32*|*MINGW32_*) + AC_CHECK_PROG(CYGPATH, cygpath, cygpath -w, echo) + EXEEXT=".exe" + TEA_PLATFORM="windows" + ;; + *CYGWIN_*) + CYGPATH=echo + EXEEXT=".exe" + # TEA_PLATFORM is determined later in LOAD_TCLCONFIG + ;; + *) + CYGPATH=echo + # Maybe we are cross-compiling.... + case ${host_alias} in + *mingw32*) + EXEEXT=".exe" + TEA_PLATFORM="windows" + ;; + *) + EXEEXT="" + TEA_PLATFORM="unix" + ;; + esac + ;; + esac + + # Check if exec_prefix is set. If not use fall back to prefix. + # Note when adjusted, so that TEA_PREFIX can correct for this. + # This is needed for recursive configures, since autoconf propagates + # $prefix, but not $exec_prefix (doh!). + if test x$exec_prefix = xNONE ; then + exec_prefix_default=yes + exec_prefix=$prefix + fi + + AC_MSG_NOTICE([configuring ${PACKAGE_NAME} ${PACKAGE_VERSION}]) + + AC_SUBST(EXEEXT) + AC_SUBST(CYGPATH) + + # This package name must be replaced statically for AC_SUBST to work + AC_SUBST(PKG_LIB_FILE) + # Substitute STUB_LIB_FILE in case package creates a stub library too. + AC_SUBST(PKG_STUB_LIB_FILE) + + # We AC_SUBST these here to ensure they are subst'ed, + # in case the user doesn't call TEA_ADD_... + AC_SUBST(PKG_STUB_SOURCES) + AC_SUBST(PKG_STUB_OBJECTS) + AC_SUBST(PKG_TCL_SOURCES) + AC_SUBST(PKG_HEADERS) + AC_SUBST(PKG_INCLUDES) + AC_SUBST(PKG_LIBS) + AC_SUBST(PKG_CFLAGS) +]) + +#------------------------------------------------------------------------ +# TEA_ADD_SOURCES -- +# +# Specify one or more source files. Users should check for +# the right platform before adding to their list. +# It is not important to specify the directory, as long as it is +# in the generic, win or unix subdirectory of $(srcdir). +# +# Arguments: +# one or more file names +# +# Results: +# +# Defines and substs the following vars: +# PKG_SOURCES +# PKG_OBJECTS +#------------------------------------------------------------------------ +AC_DEFUN([TEA_ADD_SOURCES], [ + vars="$@" + for i in $vars; do + case $i in + [\$]*) + # allow $-var names + PKG_SOURCES="$PKG_SOURCES $i" + PKG_OBJECTS="$PKG_OBJECTS $i" + ;; + *) + # check for existence - allows for generic/win/unix VPATH + # To add more dirs here (like 'src'), you have to update VPATH + # in Makefile.in as well + if test ! -f "${srcdir}/$i" -a ! -f "${srcdir}/generic/$i" \ + -a ! -f "${srcdir}/win/$i" -a ! -f "${srcdir}/unix/$i" \ + -a ! -f "${srcdir}/macosx/$i" \ + ; then + AC_MSG_ERROR([could not find source file '$i']) + fi + PKG_SOURCES="$PKG_SOURCES $i" + # this assumes it is in a VPATH dir + i=`basename $i` + # handle user calling this before or after TEA_SETUP_COMPILER + if test x"${OBJEXT}" != x ; then + j="`echo $i | sed -e 's/\.[[^.]]*$//'`.${OBJEXT}" + else + j="`echo $i | sed -e 's/\.[[^.]]*$//'`.\${OBJEXT}" + fi + PKG_OBJECTS="$PKG_OBJECTS $j" + ;; + esac + done + AC_SUBST(PKG_SOURCES) + AC_SUBST(PKG_OBJECTS) +]) + +#------------------------------------------------------------------------ +# TEA_ADD_STUB_SOURCES -- +# +# Specify one or more source files. Users should check for +# the right platform before adding to their list. +# It is not important to specify the directory, as long as it is +# in the generic, win or unix subdirectory of $(srcdir). +# +# Arguments: +# one or more file names +# +# Results: +# +# Defines and substs the following vars: +# PKG_STUB_SOURCES +# PKG_STUB_OBJECTS +#------------------------------------------------------------------------ +AC_DEFUN([TEA_ADD_STUB_SOURCES], [ + vars="$@" + for i in $vars; do + # check for existence - allows for generic/win/unix VPATH + if test ! -f "${srcdir}/$i" -a ! -f "${srcdir}/generic/$i" \ + -a ! -f "${srcdir}/win/$i" -a ! -f "${srcdir}/unix/$i" \ + -a ! -f "${srcdir}/macosx/$i" \ + ; then + AC_MSG_ERROR([could not find stub source file '$i']) + fi + PKG_STUB_SOURCES="$PKG_STUB_SOURCES $i" + # this assumes it is in a VPATH dir + i=`basename $i` + # handle user calling this before or after TEA_SETUP_COMPILER + if test x"${OBJEXT}" != x ; then + j="`echo $i | sed -e 's/\.[[^.]]*$//'`.${OBJEXT}" + else + j="`echo $i | sed -e 's/\.[[^.]]*$//'`.\${OBJEXT}" + fi + PKG_STUB_OBJECTS="$PKG_STUB_OBJECTS $j" + done + AC_SUBST(PKG_STUB_SOURCES) + AC_SUBST(PKG_STUB_OBJECTS) +]) + +#------------------------------------------------------------------------ +# TEA_ADD_TCL_SOURCES -- +# +# Specify one or more Tcl source files. These should be platform +# independent runtime files. +# +# Arguments: +# one or more file names +# +# Results: +# +# Defines and substs the following vars: +# PKG_TCL_SOURCES +#------------------------------------------------------------------------ +AC_DEFUN([TEA_ADD_TCL_SOURCES], [ + vars="$@" + for i in $vars; do + # check for existence, be strict because it is installed + if test ! -f "${srcdir}/$i" ; then + AC_MSG_ERROR([could not find tcl source file '${srcdir}/$i']) + fi + PKG_TCL_SOURCES="$PKG_TCL_SOURCES $i" + done + AC_SUBST(PKG_TCL_SOURCES) +]) + +#------------------------------------------------------------------------ +# TEA_ADD_HEADERS -- +# +# Specify one or more source headers. Users should check for +# the right platform before adding to their list. +# +# Arguments: +# one or more file names +# +# Results: +# +# Defines and substs the following vars: +# PKG_HEADERS +#------------------------------------------------------------------------ +AC_DEFUN([TEA_ADD_HEADERS], [ + vars="$@" + for i in $vars; do + # check for existence, be strict because it is installed + if test ! -f "${srcdir}/$i" ; then + AC_MSG_ERROR([could not find header file '${srcdir}/$i']) + fi + PKG_HEADERS="$PKG_HEADERS $i" + done + AC_SUBST(PKG_HEADERS) +]) + +#------------------------------------------------------------------------ +# TEA_ADD_INCLUDES -- +# +# Specify one or more include dirs. Users should check for +# the right platform before adding to their list. +# +# Arguments: +# one or more file names +# +# Results: +# +# Defines and substs the following vars: +# PKG_INCLUDES +#------------------------------------------------------------------------ +AC_DEFUN([TEA_ADD_INCLUDES], [ + vars="$@" + for i in $vars; do + PKG_INCLUDES="$PKG_INCLUDES $i" + done + AC_SUBST(PKG_INCLUDES) +]) + +#------------------------------------------------------------------------ +# TEA_ADD_LIBS -- +# +# Specify one or more libraries. Users should check for +# the right platform before adding to their list. For Windows, +# libraries provided in "foo.lib" format will be converted to +# "-lfoo" when using GCC (mingw). +# +# Arguments: +# one or more file names +# +# Results: +# +# Defines and substs the following vars: +# PKG_LIBS +#------------------------------------------------------------------------ +AC_DEFUN([TEA_ADD_LIBS], [ + vars="$@" + for i in $vars; do + if test "${TEA_PLATFORM}" = "windows" -a "$GCC" = "yes" ; then + # Convert foo.lib to -lfoo for GCC. No-op if not *.lib + i=`echo "$i" | sed -e 's/^\([[^-]].*\)\.lib[$]/-l\1/i'` + fi + PKG_LIBS="$PKG_LIBS $i" + done + AC_SUBST(PKG_LIBS) +]) + +#------------------------------------------------------------------------ +# TEA_ADD_CFLAGS -- +# +# Specify one or more CFLAGS. Users should check for +# the right platform before adding to their list. +# +# Arguments: +# one or more file names +# +# Results: +# +# Defines and substs the following vars: +# PKG_CFLAGS +#------------------------------------------------------------------------ +AC_DEFUN([TEA_ADD_CFLAGS], [ + PKG_CFLAGS="$PKG_CFLAGS $@" + AC_SUBST(PKG_CFLAGS) +]) + +#------------------------------------------------------------------------ +# TEA_ADD_CLEANFILES -- +# +# Specify one or more CLEANFILES. +# +# Arguments: +# one or more file names to clean target +# +# Results: +# +# Appends to CLEANFILES, already defined for subst in LOAD_TCLCONFIG +#------------------------------------------------------------------------ +AC_DEFUN([TEA_ADD_CLEANFILES], [ + CLEANFILES="$CLEANFILES $@" +]) + +#------------------------------------------------------------------------ +# TEA_PREFIX -- +# +# Handle the --prefix=... option by defaulting to what Tcl gave +# +# Arguments: +# none +# +# Results: +# +# If --prefix or --exec-prefix was not specified, $prefix and +# $exec_prefix will be set to the values given to Tcl when it was +# configured. +#------------------------------------------------------------------------ +AC_DEFUN([TEA_PREFIX], [ + if test "${prefix}" = "NONE"; then + prefix_default=yes + if test x"${TCL_PREFIX}" != x; then + AC_MSG_NOTICE([--prefix defaulting to TCL_PREFIX ${TCL_PREFIX}]) + prefix=${TCL_PREFIX} + else + AC_MSG_NOTICE([--prefix defaulting to /usr/local]) + prefix=/usr/local + fi + fi + if test "${exec_prefix}" = "NONE" -a x"${prefix_default}" = x"yes" \ + -o x"${exec_prefix_default}" = x"yes" ; then + if test x"${TCL_EXEC_PREFIX}" != x; then + AC_MSG_NOTICE([--exec-prefix defaulting to TCL_EXEC_PREFIX ${TCL_EXEC_PREFIX}]) + exec_prefix=${TCL_EXEC_PREFIX} + else + AC_MSG_NOTICE([--exec-prefix defaulting to ${prefix}]) + exec_prefix=$prefix + fi + fi +]) + +#------------------------------------------------------------------------ +# TEA_SETUP_COMPILER_CC -- +# +# Do compiler checks the way we want. This is just a replacement +# for AC_PROG_CC in TEA configure.in files to make them cleaner. +# +# Arguments: +# none +# +# Results: +# +# Sets up CC var and other standard bits we need to make executables. +#------------------------------------------------------------------------ +AC_DEFUN([TEA_SETUP_COMPILER_CC], [ + # Don't put any macros that use the compiler (e.g. AC_TRY_COMPILE) + # in this macro, they need to go into TEA_SETUP_COMPILER instead. + + AC_PROG_CC + AC_PROG_CPP + + INSTALL="\$(SHELL) \$(srcdir)/tclconfig/install-sh -c" + AC_SUBST(INSTALL) + INSTALL_DATA="\${INSTALL} -m 644" + AC_SUBST(INSTALL_DATA) + INSTALL_PROGRAM="\${INSTALL}" + AC_SUBST(INSTALL_PROGRAM) + INSTALL_SCRIPT="\${INSTALL}" + AC_SUBST(INSTALL_SCRIPT) + + #-------------------------------------------------------------------- + # Checks to see if the make program sets the $MAKE variable. + #-------------------------------------------------------------------- + + AC_PROG_MAKE_SET + + #-------------------------------------------------------------------- + # Find ranlib + #-------------------------------------------------------------------- + + AC_CHECK_TOOL(RANLIB, ranlib) + + #-------------------------------------------------------------------- + # Determines the correct binary file extension (.o, .obj, .exe etc.) + #-------------------------------------------------------------------- + + AC_OBJEXT + AC_EXEEXT +]) + +#------------------------------------------------------------------------ +# TEA_SETUP_COMPILER -- +# +# Do compiler checks that use the compiler. This must go after +# TEA_SETUP_COMPILER_CC, which does the actual compiler check. +# +# Arguments: +# none +# +# Results: +# +# Sets up CC var and other standard bits we need to make executables. +#------------------------------------------------------------------------ +AC_DEFUN([TEA_SETUP_COMPILER], [ + # Any macros that use the compiler (e.g. AC_TRY_COMPILE) have to go here. + AC_REQUIRE([TEA_SETUP_COMPILER_CC]) + + #------------------------------------------------------------------------ + # If we're using GCC, see if the compiler understands -pipe. If so, use it. + # It makes compiling go faster. (This is only a performance feature.) + #------------------------------------------------------------------------ + + if test -z "$no_pipe" -a -n "$GCC"; then + AC_CACHE_CHECK([if the compiler understands -pipe], + tcl_cv_cc_pipe, [ + hold_cflags=$CFLAGS; CFLAGS="$CFLAGS -pipe" + AC_TRY_COMPILE(,, tcl_cv_cc_pipe=yes, tcl_cv_cc_pipe=no) + CFLAGS=$hold_cflags]) + if test $tcl_cv_cc_pipe = yes; then + CFLAGS="$CFLAGS -pipe" + fi + fi + + #-------------------------------------------------------------------- + # Common compiler flag setup + #-------------------------------------------------------------------- + + AC_C_BIGENDIAN + if test "${TEA_PLATFORM}" = "unix" ; then + TEA_TCL_LINK_LIBS + TEA_MISSING_POSIX_HEADERS + # Let the user call this, because if it triggers, they will + # need a compat/strtod.c that is correct. Users can also + # use Tcl_GetDouble(FromObj) instead. + #TEA_BUGGY_STRTOD + fi +]) + +#------------------------------------------------------------------------ +# TEA_MAKE_LIB -- +# +# Generate a line that can be used to build a shared/unshared library +# in a platform independent manner. +# +# Arguments: +# none +# +# Requires: +# +# Results: +# +# Defines the following vars: +# CFLAGS - Done late here to note disturb other AC macros +# MAKE_LIB - Command to execute to build the Tcl library; +# differs depending on whether or not Tcl is being +# compiled as a shared library. +# MAKE_SHARED_LIB Makefile rule for building a shared library +# MAKE_STATIC_LIB Makefile rule for building a static library +# MAKE_STUB_LIB Makefile rule for building a stub library +# VC_MANIFEST_EMBED_DLL Makefile rule for embedded VC manifest in DLL +# VC_MANIFEST_EMBED_EXE Makefile rule for embedded VC manifest in EXE +#------------------------------------------------------------------------ + +AC_DEFUN([TEA_MAKE_LIB], [ + if test "${TEA_PLATFORM}" = "windows" -a "$GCC" != "yes"; then + MAKE_STATIC_LIB="\${STLIB_LD} -out:\[$]@ \$(PKG_OBJECTS)" + MAKE_SHARED_LIB="\${SHLIB_LD} \${SHLIB_LD_LIBS} \${LDFLAGS_DEFAULT} -out:\[$]@ \$(PKG_OBJECTS)" + AC_EGREP_CPP([manifest needed], [ +#if defined(_MSC_VER) && _MSC_VER >= 1400 +print("manifest needed") +#endif + ], [ + # Could do a CHECK_PROG for mt, but should always be with MSVC8+ + VC_MANIFEST_EMBED_DLL="if test -f \[$]@.manifest ; then mt.exe -nologo -manifest \[$]@.manifest -outputresource:\[$]@\;2 ; fi" + VC_MANIFEST_EMBED_EXE="if test -f \[$]@.manifest ; then mt.exe -nologo -manifest \[$]@.manifest -outputresource:\[$]@\;1 ; fi" + MAKE_SHARED_LIB="${MAKE_SHARED_LIB} ; ${VC_MANIFEST_EMBED_DLL}" + TEA_ADD_CLEANFILES([*.manifest]) + ]) + MAKE_STUB_LIB="\${STLIB_LD} -nodefaultlib -out:\[$]@ \$(PKG_STUB_OBJECTS)" + else + MAKE_STATIC_LIB="\${STLIB_LD} \[$]@ \$(PKG_OBJECTS)" + MAKE_SHARED_LIB="\${SHLIB_LD} -o \[$]@ \$(PKG_OBJECTS) \${SHLIB_LD_LIBS}" + MAKE_STUB_LIB="\${STLIB_LD} \[$]@ \$(PKG_STUB_OBJECTS)" + fi + + if test "${SHARED_BUILD}" = "1" ; then + MAKE_LIB="${MAKE_SHARED_LIB} " + else + MAKE_LIB="${MAKE_STATIC_LIB} " + fi + + #-------------------------------------------------------------------- + # Shared libraries and static libraries have different names. + # Use the double eval to make sure any variables in the suffix is + # substituted. (@@@ Might not be necessary anymore) + #-------------------------------------------------------------------- + + if test "${TEA_PLATFORM}" = "windows" ; then + if test "${SHARED_BUILD}" = "1" ; then + # We force the unresolved linking of symbols that are really in + # the private libraries of Tcl and Tk. + if test x"${TK_BIN_DIR}" != x ; then + SHLIB_LD_LIBS="${SHLIB_LD_LIBS} \"`${CYGPATH} ${TK_BIN_DIR}/${TK_STUB_LIB_FILE}`\"" + fi + SHLIB_LD_LIBS="${SHLIB_LD_LIBS} \"`${CYGPATH} ${TCL_BIN_DIR}/${TCL_STUB_LIB_FILE}`\"" + if test "$GCC" = "yes"; then + SHLIB_LD_LIBS="${SHLIB_LD_LIBS} -static-libgcc" + fi + eval eval "PKG_LIB_FILE=${PACKAGE_NAME}${SHARED_LIB_SUFFIX}" + else + eval eval "PKG_LIB_FILE=${PACKAGE_NAME}${UNSHARED_LIB_SUFFIX}" + if test "$GCC" = "yes"; then + PKG_LIB_FILE=lib${PKG_LIB_FILE} + fi + fi + # Some packages build their own stubs libraries + eval eval "PKG_STUB_LIB_FILE=${PACKAGE_NAME}stub${UNSHARED_LIB_SUFFIX}" + if test "$GCC" = "yes"; then + PKG_STUB_LIB_FILE=lib${PKG_STUB_LIB_FILE} + fi + # These aren't needed on Windows (either MSVC or gcc) + RANLIB=: + RANLIB_STUB=: + else + RANLIB_STUB="${RANLIB}" + if test "${SHARED_BUILD}" = "1" ; then + SHLIB_LD_LIBS="${SHLIB_LD_LIBS} ${TCL_STUB_LIB_SPEC}" + if test x"${TK_BIN_DIR}" != x ; then + SHLIB_LD_LIBS="${SHLIB_LD_LIBS} ${TK_STUB_LIB_SPEC}" + fi + eval eval "PKG_LIB_FILE=lib${PACKAGE_NAME}${SHARED_LIB_SUFFIX}" + RANLIB=: + else + eval eval "PKG_LIB_FILE=lib${PACKAGE_NAME}${UNSHARED_LIB_SUFFIX}" + fi + # Some packages build their own stubs libraries + eval eval "PKG_STUB_LIB_FILE=lib${PACKAGE_NAME}stub${UNSHARED_LIB_SUFFIX}" + fi + + # These are escaped so that only CFLAGS is picked up at configure time. + # The other values will be substituted at make time. + CFLAGS="${CFLAGS} \${CFLAGS_DEFAULT} \${CFLAGS_WARNING}" + if test "${SHARED_BUILD}" = "1" ; then + CFLAGS="${CFLAGS} \${SHLIB_CFLAGS}" + fi + + AC_SUBST(MAKE_LIB) + AC_SUBST(MAKE_SHARED_LIB) + AC_SUBST(MAKE_STATIC_LIB) + AC_SUBST(MAKE_STUB_LIB) + AC_SUBST(RANLIB_STUB) + AC_SUBST(VC_MANIFEST_EMBED_DLL) + AC_SUBST(VC_MANIFEST_EMBED_EXE) +]) + +#------------------------------------------------------------------------ +# TEA_LIB_SPEC -- +# +# Compute the name of an existing object library located in libdir +# from the given base name and produce the appropriate linker flags. +# +# Arguments: +# basename The base name of the library without version +# numbers, extensions, or "lib" prefixes. +# extra_dir Extra directory in which to search for the +# library. This location is used first, then +# $prefix/$exec-prefix, then some defaults. +# +# Requires: +# TEA_INIT and TEA_PREFIX must be called first. +# +# Results: +# +# Defines the following vars: +# ${basename}_LIB_NAME The computed library name. +# ${basename}_LIB_SPEC The computed linker flags. +#------------------------------------------------------------------------ + +AC_DEFUN([TEA_LIB_SPEC], [ + AC_MSG_CHECKING([for $1 library]) + + # Look in exec-prefix for the library (defined by TEA_PREFIX). + + tea_lib_name_dir="${exec_prefix}/lib" + + # Or in a user-specified location. + + if test x"$2" != x ; then + tea_extra_lib_dir=$2 + else + tea_extra_lib_dir=NONE + fi + + for i in \ + `ls -dr ${tea_extra_lib_dir}/$1[[0-9]]*.lib 2>/dev/null ` \ + `ls -dr ${tea_extra_lib_dir}/lib$1[[0-9]]* 2>/dev/null ` \ + `ls -dr ${tea_lib_name_dir}/$1[[0-9]]*.lib 2>/dev/null ` \ + `ls -dr ${tea_lib_name_dir}/lib$1[[0-9]]* 2>/dev/null ` \ + `ls -dr /usr/lib/$1[[0-9]]*.lib 2>/dev/null ` \ + `ls -dr /usr/lib/lib$1[[0-9]]* 2>/dev/null ` \ + `ls -dr /usr/lib64/$1[[0-9]]*.lib 2>/dev/null ` \ + `ls -dr /usr/lib64/lib$1[[0-9]]* 2>/dev/null ` \ + `ls -dr /usr/local/lib/$1[[0-9]]*.lib 2>/dev/null ` \ + `ls -dr /usr/local/lib/lib$1[[0-9]]* 2>/dev/null ` ; do + if test -f "$i" ; then + tea_lib_name_dir=`dirname $i` + $1_LIB_NAME=`basename $i` + $1_LIB_PATH_NAME=$i + break + fi + done + + if test "${TEA_PLATFORM}" = "windows"; then + $1_LIB_SPEC=\"`${CYGPATH} ${$1_LIB_PATH_NAME} 2>/dev/null`\" + else + # Strip off the leading "lib" and trailing ".a" or ".so" + + tea_lib_name_lib=`echo ${$1_LIB_NAME}|sed -e 's/^lib//' -e 's/\.[[^.]]*$//' -e 's/\.so.*//'` + $1_LIB_SPEC="-L${tea_lib_name_dir} -l${tea_lib_name_lib}" + fi + + if test "x${$1_LIB_NAME}" = x ; then + AC_MSG_ERROR([not found]) + else + AC_MSG_RESULT([${$1_LIB_SPEC}]) + fi +]) + +#------------------------------------------------------------------------ +# TEA_PRIVATE_TCL_HEADERS -- +# +# Locate the private Tcl include files +# +# Arguments: +# +# Requires: +# TCL_SRC_DIR Assumes that TEA_LOAD_TCLCONFIG has +# already been called. +# +# Results: +# +# Substitutes the following vars: +# TCL_TOP_DIR_NATIVE +# TCL_INCLUDES +#------------------------------------------------------------------------ + +AC_DEFUN([TEA_PRIVATE_TCL_HEADERS], [ + # Allow for --with-tclinclude to take effect and define ${ac_cv_c_tclh} + AC_REQUIRE([TEA_PUBLIC_TCL_HEADERS]) + AC_MSG_CHECKING([for Tcl private include files]) + + TCL_SRC_DIR_NATIVE=`${CYGPATH} ${TCL_SRC_DIR}` + TCL_TOP_DIR_NATIVE=\"${TCL_SRC_DIR_NATIVE}\" + + # Check to see if tclPort.h isn't already with the public headers + # Don't look for tclInt.h because that resides with tcl.h in the core + # sources, but the Port headers are in a different directory + if test "${TEA_PLATFORM}" = "windows" -a \ + -f "${ac_cv_c_tclh}/tclWinPort.h"; then + result="private headers found with public headers" + elif test "${TEA_PLATFORM}" = "unix" -a \ + -f "${ac_cv_c_tclh}/tclUnixPort.h"; then + result="private headers found with public headers" + else + TCL_GENERIC_DIR_NATIVE=\"${TCL_SRC_DIR_NATIVE}/generic\" + if test "${TEA_PLATFORM}" = "windows"; then + TCL_PLATFORM_DIR_NATIVE=\"${TCL_SRC_DIR_NATIVE}/win\" + else + TCL_PLATFORM_DIR_NATIVE=\"${TCL_SRC_DIR_NATIVE}/unix\" + fi + # Overwrite the previous TCL_INCLUDES as this should capture both + # public and private headers in the same set. + # We want to ensure these are substituted so as not to require + # any *_NATIVE vars be defined in the Makefile + TCL_INCLUDES="-I${TCL_GENERIC_DIR_NATIVE} -I${TCL_PLATFORM_DIR_NATIVE}" + if test "`uname -s`" = "Darwin"; then + # If Tcl was built as a framework, attempt to use + # the framework's Headers and PrivateHeaders directories + case ${TCL_DEFS} in + *TCL_FRAMEWORK*) + if test -d "${TCL_BIN_DIR}/Headers" -a \ + -d "${TCL_BIN_DIR}/PrivateHeaders"; then + TCL_INCLUDES="-I\"${TCL_BIN_DIR}/Headers\" -I\"${TCL_BIN_DIR}/PrivateHeaders\" ${TCL_INCLUDES}" + else + TCL_INCLUDES="${TCL_INCLUDES} ${TCL_INCLUDE_SPEC} `echo "${TCL_INCLUDE_SPEC}" | sed -e 's/Headers/PrivateHeaders/'`" + fi + ;; + esac + result="Using ${TCL_INCLUDES}" + else + if test ! -f "${TCL_SRC_DIR}/generic/tclInt.h" ; then + AC_MSG_ERROR([Cannot find private header tclInt.h in ${TCL_SRC_DIR}]) + fi + result="Using srcdir found in tclConfig.sh: ${TCL_SRC_DIR}" + fi + fi + + AC_SUBST(TCL_TOP_DIR_NATIVE) + + AC_SUBST(TCL_INCLUDES) + AC_MSG_RESULT([${result}]) +]) + +#------------------------------------------------------------------------ +# TEA_PUBLIC_TCL_HEADERS -- +# +# Locate the installed public Tcl header files +# +# Arguments: +# None. +# +# Requires: +# CYGPATH must be set +# +# Results: +# +# Adds a --with-tclinclude switch to configure. +# Result is cached. +# +# Substitutes the following vars: +# TCL_INCLUDES +#------------------------------------------------------------------------ + +AC_DEFUN([TEA_PUBLIC_TCL_HEADERS], [ + AC_MSG_CHECKING([for Tcl public headers]) + + AC_ARG_WITH(tclinclude, [ --with-tclinclude directory containing the public Tcl header files], with_tclinclude=${withval}) + + AC_CACHE_VAL(ac_cv_c_tclh, [ + # Use the value from --with-tclinclude, if it was given + + if test x"${with_tclinclude}" != x ; then + if test -f "${with_tclinclude}/tcl.h" ; then + ac_cv_c_tclh=${with_tclinclude} + else + AC_MSG_ERROR([${with_tclinclude} directory does not contain tcl.h]) + fi + else + list="" + if test "`uname -s`" = "Darwin"; then + # If Tcl was built as a framework, attempt to use + # the framework's Headers directory + case ${TCL_DEFS} in + *TCL_FRAMEWORK*) + list="`ls -d ${TCL_BIN_DIR}/Headers 2>/dev/null`" + ;; + esac + fi + + # Look in the source dir only if Tcl is not installed, + # and in that situation, look there before installed locations. + if test -f "${TCL_BIN_DIR}/Makefile" ; then + list="$list `ls -d ${TCL_SRC_DIR}/generic 2>/dev/null`" + fi + + # Check order: pkg --prefix location, Tcl's --prefix location, + # relative to directory of tclConfig.sh. + + eval "temp_includedir=${includedir}" + list="$list \ + `ls -d ${temp_includedir} 2>/dev/null` \ + `ls -d ${TCL_PREFIX}/include 2>/dev/null` \ + `ls -d ${TCL_BIN_DIR}/../include 2>/dev/null`" + if test "${TEA_PLATFORM}" != "windows" -o "$GCC" = "yes"; then + list="$list /usr/local/include /usr/include" + if test x"${TCL_INCLUDE_SPEC}" != x ; then + d=`echo "${TCL_INCLUDE_SPEC}" | sed -e 's/^-I//'` + list="$list `ls -d ${d} 2>/dev/null`" + fi + fi + for i in $list ; do + if test -f "$i/tcl.h" ; then + ac_cv_c_tclh=$i + break + fi + done + fi + ]) + + # Print a message based on how we determined the include path + + if test x"${ac_cv_c_tclh}" = x ; then + AC_MSG_ERROR([tcl.h not found. Please specify its location with --with-tclinclude]) + else + AC_MSG_RESULT([${ac_cv_c_tclh}]) + fi + + # Convert to a native path and substitute into the output files. + + INCLUDE_DIR_NATIVE=`${CYGPATH} ${ac_cv_c_tclh}` + + TCL_INCLUDES=-I\"${INCLUDE_DIR_NATIVE}\" + + AC_SUBST(TCL_INCLUDES) +]) + +#------------------------------------------------------------------------ +# TEA_PRIVATE_TK_HEADERS -- +# +# Locate the private Tk include files +# +# Arguments: +# +# Requires: +# TK_SRC_DIR Assumes that TEA_LOAD_TKCONFIG has +# already been called. +# +# Results: +# +# Substitutes the following vars: +# TK_INCLUDES +#------------------------------------------------------------------------ + +AC_DEFUN([TEA_PRIVATE_TK_HEADERS], [ + # Allow for --with-tkinclude to take effect and define ${ac_cv_c_tkh} + AC_REQUIRE([TEA_PUBLIC_TK_HEADERS]) + AC_MSG_CHECKING([for Tk private include files]) + + TK_SRC_DIR_NATIVE=`${CYGPATH} ${TK_SRC_DIR}` + TK_TOP_DIR_NATIVE=\"${TK_SRC_DIR_NATIVE}\" + + # Check to see if tkPort.h isn't already with the public headers + # Don't look for tkInt.h because that resides with tk.h in the core + # sources, but the Port headers are in a different directory + if test "${TEA_PLATFORM}" = "windows" -a \ + -f "${ac_cv_c_tkh}/tkWinPort.h"; then + result="private headers found with public headers" + elif test "${TEA_PLATFORM}" = "unix" -a \ + -f "${ac_cv_c_tkh}/tkUnixPort.h"; then + result="private headers found with public headers" + else + TK_GENERIC_DIR_NATIVE=\"${TK_SRC_DIR_NATIVE}/generic\" + TK_XLIB_DIR_NATIVE=\"${TK_SRC_DIR_NATIVE}/xlib\" + if test "${TEA_PLATFORM}" = "windows"; then + TK_PLATFORM_DIR_NATIVE=\"${TK_SRC_DIR_NATIVE}/win\" + else + TK_PLATFORM_DIR_NATIVE=\"${TK_SRC_DIR_NATIVE}/unix\" + fi + # Overwrite the previous TK_INCLUDES as this should capture both + # public and private headers in the same set. + # We want to ensure these are substituted so as not to require + # any *_NATIVE vars be defined in the Makefile + TK_INCLUDES="-I${TK_GENERIC_DIR_NATIVE} -I${TK_PLATFORM_DIR_NATIVE}" + # Detect and add ttk subdir + if test -d "${TK_SRC_DIR}/generic/ttk"; then + TK_INCLUDES="${TK_INCLUDES} -I\"${TK_SRC_DIR_NATIVE}/generic/ttk\"" + fi + if test "${TEA_WINDOWINGSYSTEM}" != "x11"; then + TK_INCLUDES="${TK_INCLUDES} -I\"${TK_XLIB_DIR_NATIVE}\"" + fi + if test "${TEA_WINDOWINGSYSTEM}" = "aqua"; then + TK_INCLUDES="${TK_INCLUDES} -I\"${TK_SRC_DIR_NATIVE}/macosx\"" + fi + if test "`uname -s`" = "Darwin"; then + # If Tk was built as a framework, attempt to use + # the framework's Headers and PrivateHeaders directories + case ${TK_DEFS} in + *TK_FRAMEWORK*) + if test -d "${TK_BIN_DIR}/Headers" -a \ + -d "${TK_BIN_DIR}/PrivateHeaders"; then + TK_INCLUDES="-I\"${TK_BIN_DIR}/Headers\" -I\"${TK_BIN_DIR}/PrivateHeaders\" ${TK_INCLUDES}" + else + TK_INCLUDES="${TK_INCLUDES} ${TK_INCLUDE_SPEC} `echo "${TK_INCLUDE_SPEC}" | sed -e 's/Headers/PrivateHeaders/'`" + fi + ;; + esac + result="Using ${TK_INCLUDES}" + else + if test ! -f "${TK_SRC_DIR}/generic/tkInt.h" ; then + AC_MSG_ERROR([Cannot find private header tkInt.h in ${TK_SRC_DIR}]) + fi + result="Using srcdir found in tkConfig.sh: ${TK_SRC_DIR}" + fi + fi + + AC_SUBST(TK_TOP_DIR_NATIVE) + AC_SUBST(TK_XLIB_DIR_NATIVE) + + AC_SUBST(TK_INCLUDES) + AC_MSG_RESULT([${result}]) +]) + +#------------------------------------------------------------------------ +# TEA_PUBLIC_TK_HEADERS -- +# +# Locate the installed public Tk header files +# +# Arguments: +# None. +# +# Requires: +# CYGPATH must be set +# +# Results: +# +# Adds a --with-tkinclude switch to configure. +# Result is cached. +# +# Substitutes the following vars: +# TK_INCLUDES +#------------------------------------------------------------------------ + +AC_DEFUN([TEA_PUBLIC_TK_HEADERS], [ + AC_MSG_CHECKING([for Tk public headers]) + + AC_ARG_WITH(tkinclude, [ --with-tkinclude directory containing the public Tk header files], with_tkinclude=${withval}) + + AC_CACHE_VAL(ac_cv_c_tkh, [ + # Use the value from --with-tkinclude, if it was given + + if test x"${with_tkinclude}" != x ; then + if test -f "${with_tkinclude}/tk.h" ; then + ac_cv_c_tkh=${with_tkinclude} + else + AC_MSG_ERROR([${with_tkinclude} directory does not contain tk.h]) + fi + else + list="" + if test "`uname -s`" = "Darwin"; then + # If Tk was built as a framework, attempt to use + # the framework's Headers directory. + case ${TK_DEFS} in + *TK_FRAMEWORK*) + list="`ls -d ${TK_BIN_DIR}/Headers 2>/dev/null`" + ;; + esac + fi + + # Look in the source dir only if Tk is not installed, + # and in that situation, look there before installed locations. + if test -f "${TK_BIN_DIR}/Makefile" ; then + list="$list `ls -d ${TK_SRC_DIR}/generic 2>/dev/null`" + fi + + # Check order: pkg --prefix location, Tk's --prefix location, + # relative to directory of tkConfig.sh, Tcl's --prefix location, + # relative to directory of tclConfig.sh. + + eval "temp_includedir=${includedir}" + list="$list \ + `ls -d ${temp_includedir} 2>/dev/null` \ + `ls -d ${TK_PREFIX}/include 2>/dev/null` \ + `ls -d ${TK_BIN_DIR}/../include 2>/dev/null` \ + `ls -d ${TCL_PREFIX}/include 2>/dev/null` \ + `ls -d ${TCL_BIN_DIR}/../include 2>/dev/null`" + if test "${TEA_PLATFORM}" != "windows" -o "$GCC" = "yes"; then + list="$list /usr/local/include /usr/include" + if test x"${TK_INCLUDE_SPEC}" != x ; then + d=`echo "${TK_INCLUDE_SPEC}" | sed -e 's/^-I//'` + list="$list `ls -d ${d} 2>/dev/null`" + fi + fi + for i in $list ; do + if test -f "$i/tk.h" ; then + ac_cv_c_tkh=$i + break + fi + done + fi + ]) + + # Print a message based on how we determined the include path + + if test x"${ac_cv_c_tkh}" = x ; then + AC_MSG_ERROR([tk.h not found. Please specify its location with --with-tkinclude]) + else + AC_MSG_RESULT([${ac_cv_c_tkh}]) + fi + + # Convert to a native path and substitute into the output files. + + INCLUDE_DIR_NATIVE=`${CYGPATH} ${ac_cv_c_tkh}` + + TK_INCLUDES=-I\"${INCLUDE_DIR_NATIVE}\" + + AC_SUBST(TK_INCLUDES) + + if test "${TEA_WINDOWINGSYSTEM}" != "x11"; then + # On Windows and Aqua, we need the X compat headers + AC_MSG_CHECKING([for X11 header files]) + if test ! -r "${INCLUDE_DIR_NATIVE}/X11/Xlib.h"; then + INCLUDE_DIR_NATIVE="`${CYGPATH} ${TK_SRC_DIR}/xlib`" + TK_XINCLUDES=-I\"${INCLUDE_DIR_NATIVE}\" + AC_SUBST(TK_XINCLUDES) + fi + AC_MSG_RESULT([${INCLUDE_DIR_NATIVE}]) + fi +]) + +#------------------------------------------------------------------------ +# TEA_PATH_CONFIG -- +# +# Locate the ${1}Config.sh file and perform a sanity check on +# the ${1} compile flags. These are used by packages like +# [incr Tk] that load *Config.sh files from more than Tcl and Tk. +# +# Arguments: +# none +# +# Results: +# +# Adds the following arguments to configure: +# --with-$1=... +# +# Defines the following vars: +# $1_BIN_DIR Full path to the directory containing +# the $1Config.sh file +#------------------------------------------------------------------------ + +AC_DEFUN([TEA_PATH_CONFIG], [ + # + # Ok, lets find the $1 configuration + # First, look for one uninstalled. + # the alternative search directory is invoked by --with-$1 + # + + if test x"${no_$1}" = x ; then + # we reset no_$1 in case something fails here + no_$1=true + AC_ARG_WITH($1, [ --with-$1 directory containing $1 configuration ($1Config.sh)], with_$1config=${withval}) + AC_MSG_CHECKING([for $1 configuration]) + AC_CACHE_VAL(ac_cv_c_$1config,[ + + # First check to see if --with-$1 was specified. + if test x"${with_$1config}" != x ; then + case ${with_$1config} in + */$1Config.sh ) + if test -f ${with_$1config}; then + AC_MSG_WARN([--with-$1 argument should refer to directory containing $1Config.sh, not to $1Config.sh itself]) + with_$1config=`echo ${with_$1config} | sed 's!/$1Config\.sh$!!'` + fi;; + esac + if test -f "${with_$1config}/$1Config.sh" ; then + ac_cv_c_$1config=`(cd ${with_$1config}; pwd)` + else + AC_MSG_ERROR([${with_$1config} directory doesn't contain $1Config.sh]) + fi + fi + + # then check for a private $1 installation + if test x"${ac_cv_c_$1config}" = x ; then + for i in \ + ../$1 \ + `ls -dr ../$1*[[0-9]].[[0-9]]*.[[0-9]]* 2>/dev/null` \ + `ls -dr ../$1*[[0-9]].[[0-9]][[0-9]] 2>/dev/null` \ + `ls -dr ../$1*[[0-9]].[[0-9]] 2>/dev/null` \ + `ls -dr ../$1*[[0-9]].[[0-9]]* 2>/dev/null` \ + ../../$1 \ + `ls -dr ../../$1*[[0-9]].[[0-9]]*.[[0-9]]* 2>/dev/null` \ + `ls -dr ../../$1*[[0-9]].[[0-9]][[0-9]] 2>/dev/null` \ + `ls -dr ../../$1*[[0-9]].[[0-9]] 2>/dev/null` \ + `ls -dr ../../$1*[[0-9]].[[0-9]]* 2>/dev/null` \ + ../../../$1 \ + `ls -dr ../../../$1*[[0-9]].[[0-9]]*.[[0-9]]* 2>/dev/null` \ + `ls -dr ../../../$1*[[0-9]].[[0-9]][[0-9]] 2>/dev/null` \ + `ls -dr ../../../$1*[[0-9]].[[0-9]] 2>/dev/null` \ + `ls -dr ../../../$1*[[0-9]].[[0-9]]* 2>/dev/null` \ + ${srcdir}/../$1 \ + `ls -dr ${srcdir}/../$1*[[0-9]].[[0-9]]*.[[0-9]]* 2>/dev/null` \ + `ls -dr ${srcdir}/../$1*[[0-9]].[[0-9]][[0-9]] 2>/dev/null` \ + `ls -dr ${srcdir}/../$1*[[0-9]].[[0-9]] 2>/dev/null` \ + `ls -dr ${srcdir}/../$1*[[0-9]].[[0-9]]* 2>/dev/null` \ + ; do + if test -f "$i/$1Config.sh" ; then + ac_cv_c_$1config=`(cd $i; pwd)` + break + fi + if test -f "$i/unix/$1Config.sh" ; then + ac_cv_c_$1config=`(cd $i/unix; pwd)` + break + fi + done + fi + + # check in a few common install locations + if test x"${ac_cv_c_$1config}" = x ; then + for i in `ls -d ${libdir} 2>/dev/null` \ + `ls -d ${exec_prefix}/lib 2>/dev/null` \ + `ls -d ${prefix}/lib 2>/dev/null` \ + `ls -d /usr/local/lib 2>/dev/null` \ + `ls -d /usr/contrib/lib 2>/dev/null` \ + `ls -d /usr/lib 2>/dev/null` \ + `ls -d /usr/lib64 2>/dev/null` \ + ; do + if test -f "$i/$1Config.sh" ; then + ac_cv_c_$1config=`(cd $i; pwd)` + break + fi + done + fi + ]) + + if test x"${ac_cv_c_$1config}" = x ; then + $1_BIN_DIR="# no $1 configs found" + AC_MSG_WARN([Cannot find $1 configuration definitions]) + exit 0 + else + no_$1= + $1_BIN_DIR=${ac_cv_c_$1config} + AC_MSG_RESULT([found $$1_BIN_DIR/$1Config.sh]) + fi + fi +]) + +#------------------------------------------------------------------------ +# TEA_LOAD_CONFIG -- +# +# Load the $1Config.sh file +# +# Arguments: +# +# Requires the following vars to be set: +# $1_BIN_DIR +# +# Results: +# +# Substitutes the following vars: +# $1_SRC_DIR +# $1_LIB_FILE +# $1_LIB_SPEC +#------------------------------------------------------------------------ + +AC_DEFUN([TEA_LOAD_CONFIG], [ + AC_MSG_CHECKING([for existence of ${$1_BIN_DIR}/$1Config.sh]) + + if test -f "${$1_BIN_DIR}/$1Config.sh" ; then + AC_MSG_RESULT([loading]) + . "${$1_BIN_DIR}/$1Config.sh" + else + AC_MSG_RESULT([file not found]) + fi + + # + # If the $1_BIN_DIR is the build directory (not the install directory), + # then set the common variable name to the value of the build variables. + # For example, the variable $1_LIB_SPEC will be set to the value + # of $1_BUILD_LIB_SPEC. An extension should make use of $1_LIB_SPEC + # instead of $1_BUILD_LIB_SPEC since it will work with both an + # installed and uninstalled version of Tcl. + # + + if test -f "${$1_BIN_DIR}/Makefile" ; then + AC_MSG_WARN([Found Makefile - using build library specs for $1]) + $1_LIB_SPEC=${$1_BUILD_LIB_SPEC} + $1_STUB_LIB_SPEC=${$1_BUILD_STUB_LIB_SPEC} + $1_STUB_LIB_PATH=${$1_BUILD_STUB_LIB_PATH} + $1_INCLUDE_SPEC=${$1_BUILD_INCLUDE_SPEC} + $1_LIBRARY_PATH=${$1_LIBRARY_PATH} + fi + + AC_SUBST($1_VERSION) + AC_SUBST($1_BIN_DIR) + AC_SUBST($1_SRC_DIR) + + AC_SUBST($1_LIB_FILE) + AC_SUBST($1_LIB_SPEC) + + AC_SUBST($1_STUB_LIB_FILE) + AC_SUBST($1_STUB_LIB_SPEC) + AC_SUBST($1_STUB_LIB_PATH) + + # Allow the caller to prevent this auto-check by specifying any 2nd arg + AS_IF([test "x$2" = x], [ + # Check both upper and lower-case variants + # If a dev wanted non-stubs libs, this function could take an option + # to not use _STUB in the paths below + AS_IF([test "x${$1_STUB_LIB_SPEC}" = x], + [TEA_LOAD_CONFIG_LIB(translit($1,[a-z],[A-Z])_STUB)], + [TEA_LOAD_CONFIG_LIB($1_STUB)]) + ]) +]) + +#------------------------------------------------------------------------ +# TEA_LOAD_CONFIG_LIB -- +# +# Helper function to load correct library from another extension's +# ${PACKAGE}Config.sh. +# +# Results: +# Adds to LIBS the appropriate extension library +#------------------------------------------------------------------------ +AC_DEFUN([TEA_LOAD_CONFIG_LIB], [ + AC_MSG_CHECKING([For $1 library for LIBS]) + # This simplifies the use of stub libraries by automatically adding + # the stub lib to your path. Normally this would add to SHLIB_LD_LIBS, + # but this is called before CONFIG_CFLAGS. More importantly, this adds + # to PKG_LIBS, which becomes LIBS, and that is only used by SHLIB_LD. + if test "x${$1_LIB_SPEC}" != "x" ; then + if test "${TEA_PLATFORM}" = "windows" -a "$GCC" != "yes" ; then + TEA_ADD_LIBS([\"`${CYGPATH} ${$1_LIB_PATH}`\"]) + AC_MSG_RESULT([using $1_LIB_PATH ${$1_LIB_PATH}]) + else + TEA_ADD_LIBS([${$1_LIB_SPEC}]) + AC_MSG_RESULT([using $1_LIB_SPEC ${$1_LIB_SPEC}]) + fi + else + AC_MSG_RESULT([file not found]) + fi +]) + +#------------------------------------------------------------------------ +# TEA_EXPORT_CONFIG -- +# +# Define the data to insert into the ${PACKAGE}Config.sh file +# +# Arguments: +# +# Requires the following vars to be set: +# $1 +# +# Results: +# Substitutes the following vars: +#------------------------------------------------------------------------ + +AC_DEFUN([TEA_EXPORT_CONFIG], [ + #-------------------------------------------------------------------- + # These are for $1Config.sh + #-------------------------------------------------------------------- + + # pkglibdir must be a fully qualified path and (not ${exec_prefix}/lib) + eval pkglibdir="[$]{libdir}/$1${PACKAGE_VERSION}" + if test "${TCL_LIB_VERSIONS_OK}" = "ok"; then + eval $1_LIB_FLAG="-l$1${PACKAGE_VERSION}${DBGX}" + eval $1_STUB_LIB_FLAG="-l$1stub${PACKAGE_VERSION}${DBGX}" + else + eval $1_LIB_FLAG="-l$1`echo ${PACKAGE_VERSION} | tr -d .`${DBGX}" + eval $1_STUB_LIB_FLAG="-l$1stub`echo ${PACKAGE_VERSION} | tr -d .`${DBGX}" + fi + $1_BUILD_LIB_SPEC="-L`pwd` ${$1_LIB_FLAG}" + $1_LIB_SPEC="-L${pkglibdir} ${$1_LIB_FLAG}" + $1_BUILD_STUB_LIB_SPEC="-L`pwd` [$]{$1_STUB_LIB_FLAG}" + $1_STUB_LIB_SPEC="-L${pkglibdir} [$]{$1_STUB_LIB_FLAG}" + $1_BUILD_STUB_LIB_PATH="`pwd`/[$]{PKG_STUB_LIB_FILE}" + $1_STUB_LIB_PATH="${pkglibdir}/[$]{PKG_STUB_LIB_FILE}" + + AC_SUBST($1_BUILD_LIB_SPEC) + AC_SUBST($1_LIB_SPEC) + AC_SUBST($1_BUILD_STUB_LIB_SPEC) + AC_SUBST($1_STUB_LIB_SPEC) + AC_SUBST($1_BUILD_STUB_LIB_PATH) + AC_SUBST($1_STUB_LIB_PATH) + + AC_SUBST(MAJOR_VERSION) + AC_SUBST(MINOR_VERSION) + AC_SUBST(PATCHLEVEL) +]) + + +#------------------------------------------------------------------------ +# TEA_PATH_CELIB -- +# +# Locate Keuchel's celib emulation layer for targeting Win/CE +# +# Arguments: +# none +# +# Results: +# +# Adds the following arguments to configure: +# --with-celib=... +# +# Defines the following vars: +# CELIB_DIR Full path to the directory containing +# the include and platform lib files +#------------------------------------------------------------------------ + +AC_DEFUN([TEA_PATH_CELIB], [ + # First, look for one uninstalled. + # the alternative search directory is invoked by --with-celib + + if test x"${no_celib}" = x ; then + # we reset no_celib in case something fails here + no_celib=true + AC_ARG_WITH(celib,[ --with-celib=DIR use Windows/CE support library from DIR], with_celibconfig=${withval}) + AC_MSG_CHECKING([for Windows/CE celib directory]) + AC_CACHE_VAL(ac_cv_c_celibconfig,[ + # First check to see if --with-celibconfig was specified. + if test x"${with_celibconfig}" != x ; then + if test -d "${with_celibconfig}/inc" ; then + ac_cv_c_celibconfig=`(cd ${with_celibconfig}; pwd)` + else + AC_MSG_ERROR([${with_celibconfig} directory doesn't contain inc directory]) + fi + fi + + # then check for a celib library + if test x"${ac_cv_c_celibconfig}" = x ; then + for i in \ + ../celib-palm-3.0 \ + ../celib \ + ../../celib-palm-3.0 \ + ../../celib \ + `ls -dr ../celib-*3.[[0-9]]* 2>/dev/null` \ + ${srcdir}/../celib-palm-3.0 \ + ${srcdir}/../celib \ + `ls -dr ${srcdir}/../celib-*3.[[0-9]]* 2>/dev/null` \ + ; do + if test -d "$i/inc" ; then + ac_cv_c_celibconfig=`(cd $i; pwd)` + break + fi + done + fi + ]) + if test x"${ac_cv_c_celibconfig}" = x ; then + AC_MSG_ERROR([Cannot find celib support library directory]) + else + no_celib= + CELIB_DIR=${ac_cv_c_celibconfig} + CELIB_DIR=`echo "$CELIB_DIR" | sed -e 's!\\\!/!g'` + AC_MSG_RESULT([found $CELIB_DIR]) + fi + fi +]) + + +# Local Variables: +# mode: autoconf +# End: ADDED autoconf/tea/win/makefile.vc Index: autoconf/tea/win/makefile.vc ================================================================== --- autoconf/tea/win/makefile.vc +++ autoconf/tea/win/makefile.vc @@ -0,0 +1,414 @@ +# makefile.vc -- -*- Makefile -*- +# +# Microsoft Visual C++ makefile for use with nmake.exe v1.62+ (VC++ 5.0+) +# +# This makefile is based upon the Tcl 8.4 Makefile.vc and modified to +# make it suitable as a general package makefile. Look for the word EDIT +# which marks sections that may need modification. As a minumum you will +# need to change the PROJECT, DOTVERSION and DLLOBJS variables to values +# relevant to your package. +# +# See the file "license.terms" for information on usage and redistribution +# of this file, and for a DISCLAIMER OF ALL WARRANTIES. +# +# Copyright (c) 1995-1996 Sun Microsystems, Inc. +# Copyright (c) 1998-2000 Ajuba Solutions. +# Copyright (c) 2001 ActiveState Corporation. +# Copyright (c) 2001-2002 David Gravereaux. +# Copyright (c) 2003 Pat Thoyts +# +#------------------------------------------------------------------------- +# RCS: @(#)$Id: makefile.vc,v 1.4 2004/07/26 08:22:05 patthoyts Exp $ +#------------------------------------------------------------------------- + +!if !defined(MSDEVDIR) && !defined(MSVCDIR) && !defined(VCINSTALLDIR) && !defined(MSSDK) && !defined(WINDOWSSDKDIR) +MSG = ^ +You will need to run vcvars32.bat from Developer Studio, first, to setup^ +the environment. Jump to this line to read the new instructions. +!error $(MSG) +!endif + +#------------------------------------------------------------------------------ +# HOW TO USE this makefile: +# +# 1) It is now necessary to have %MSVCDir% set in the environment. This is +# used as a check to see if vcvars32.bat had been run prior to running +# nmake or during the installation of Microsoft Visual C++, MSVCDir had +# been set globally and the PATH adjusted. Either way is valid. +# +# You'll need to run vcvars32.bat contained in the MsDev's vc(98)/bin +# directory to setup the proper environment, if needed, for your current +# setup. This is a needed bootstrap requirement and allows the swapping of +# different environments to be easier. +# +# 2) To use the Platform SDK (not expressly needed), run setenv.bat after +# vcvars32.bat according to the instructions for it. This can also turn on +# the 64-bit compiler, if your SDK has it. +# +# 3) Targets are: +# all -- Builds everything. +# -- Builds the project (eg: nmake sample) +# test -- Builds and runs the test suite. +# install -- Installs the built binaries and libraries to $(INSTALLDIR) +# in an appropriate subdirectory. +# clean/realclean/distclean -- varying levels of cleaning. +# +# 4) Macros usable on the commandline: +# INSTALLDIR= +# Sets where to install Tcl from the built binaries. +# C:\Progra~1\Tcl is assumed when not specified. +# +# OPTS=static,msvcrt,staticpkg,threads,symbols,profile,loimpact,none +# Sets special options for the core. The default is for none. +# Any combination of the above may be used (comma separated). +# 'none' will over-ride everything to nothing. +# +# static = Builds a static library of the core instead of a +# dll. The shell will be static (and large), as well. +# msvcrt = Effects the static option only to switch it from +# using libcmt(d) as the C runtime [by default] to +# msvcrt(d). This is useful for static embedding +# support. +# staticpkg = Effects the static option only to switch +# tclshXX.exe to have the dde and reg extension linked +# inside it. +# threads = Turns on full multithreading support. +# thrdalloc = Use the thread allocator (shared global free pool). +# symbols = Adds symbols for step debugging. +# profile = Adds profiling hooks. Map file is assumed. +# loimpact = Adds a flag for how NT treats the heap to keep memory +# in use, low. This is said to impact alloc performance. +# +# STATS=memdbg,compdbg,none +# Sets optional memory and bytecode compiler debugging code added +# to the core. The default is for none. Any combination of the +# above may be used (comma separated). 'none' will over-ride +# everything to nothing. +# +# memdbg = Enables the debugging memory allocator. +# compdbg = Enables byte compilation logging. +# +# MACHINE=(IX86|IA64|ALPHA) +# Set the machine type used for the compiler, linker, and +# resource compiler. This hook is needed to tell the tools +# when alternate platforms are requested. IX86 is the default +# when not specified. +# +# TMP_DIR= +# OUT_DIR= +# Hooks to allow the intermediate and output directories to be +# changed. $(OUT_DIR) is assumed to be +# $(BINROOT)\(Release|Debug) based on if symbols are requested. +# $(TMP_DIR) will de $(OUT_DIR)\ by default. +# +# TESTPAT= +# Reads the tests requested to be run from this file. +# +# CFG_ENCODING=encoding +# name of encoding for configuration information. Defaults +# to cp1252 +# +# 5) Examples: +# +# Basic syntax of calling nmake looks like this: +# nmake [-nologo] -f makefile.vc [target|macrodef [target|macrodef] [...]] +# +# Standard (no frills) +# c:\tcl_src\win\>c:\progra~1\micros~1\vc98\bin\vcvars32.bat +# Setting environment for using Microsoft Visual C++ tools. +# c:\tcl_src\win\>nmake -f makefile.vc all +# c:\tcl_src\win\>nmake -f makefile.vc install INSTALLDIR=c:\progra~1\tcl +# +# Building for Win64 +# c:\tcl_src\win\>c:\progra~1\micros~1\vc98\bin\vcvars32.bat +# Setting environment for using Microsoft Visual C++ tools. +# c:\tcl_src\win\>c:\progra~1\platfo~1\setenv.bat /pre64 /RETAIL +# Targeting Windows pre64 RETAIL +# c:\tcl_src\win\>nmake -f makefile.vc MACHINE=IA64 +# +#------------------------------------------------------------------------------ +#============================================================================== +############################################################################### +#------------------------------------------------------------------------------ + +!if !exist("makefile.vc") +MSG = ^ +You must run this makefile only from the directory it is in.^ +Please `cd` to its location first. +!error $(MSG) +!endif + +#------------------------------------------------------------------------- +# Project specific information (EDIT) +# +# You should edit this with the name and version of your project. This +# information is used to generate the name of the package library and +# it's install location. +# +# For example, the sample extension is going to build sample04.dll and +# would install it into $(INSTALLDIR)\lib\sample04 +# +# You need to specify the object files that need to be linked into your +# binary here. +# +#------------------------------------------------------------------------- + +PROJECT = sqlite3 +!include "rules.vc" + +# nmakehelp -V will search the file for tag, skips until a +# number and returns all character until a character not in [0-9.ab] +# is read. + +!if [echo REM = This file is generated from Makefile.vc > versions.vc] +!endif +# get project version from row "AC_INIT([sqlite], [3.7.14])" +!if [echo DOTVERSION = \>> versions.vc] \ + && [nmakehlp -V ..\configure.in AC_INIT >> versions.vc] +!endif +!include "versions.vc" + +VERSION = $(DOTVERSION:.=) +STUBPREFIX = $(PROJECT)stub + +DLLOBJS = \ + $(TMP_DIR)\tclsqlite3.obj + +#------------------------------------------------------------------------- +# Target names and paths ( shouldn't need changing ) +#------------------------------------------------------------------------- + +BINROOT = . +ROOT = .. + +PRJIMPLIB = $(OUT_DIR)\$(PROJECT)$(VERSION)$(SUFX).lib +PRJLIBNAME = $(PROJECT)$(VERSION)$(SUFX).$(EXT) +PRJLIB = $(OUT_DIR)\$(PRJLIBNAME) + +PRJSTUBLIBNAME = $(STUBPREFIX)$(VERSION).lib +PRJSTUBLIB = $(OUT_DIR)\$(PRJSTUBLIBNAME) + +### Make sure we use backslash only. +PRJ_INSTALL_DIR = $(_INSTALLDIR)\$(PROJECT)$(DOTVERSION) +LIB_INSTALL_DIR = $(PRJ_INSTALL_DIR) +BIN_INSTALL_DIR = $(PRJ_INSTALL_DIR) +DOC_INSTALL_DIR = $(PRJ_INSTALL_DIR) +SCRIPT_INSTALL_DIR = $(PRJ_INSTALL_DIR) +INCLUDE_INSTALL_DIR = $(_TCLDIR)\include + +### The following paths CANNOT have spaces in them. +GENERICDIR = $(ROOT)\generic +WINDIR = $(ROOT)\win +LIBDIR = $(ROOT)\library +DOCDIR = $(ROOT)\doc +TOOLSDIR = $(ROOT)\tools +COMPATDIR = $(ROOT)\compat + +#--------------------------------------------------------------------- +# Compile flags +#--------------------------------------------------------------------- + +!if !$(DEBUG) +!if $(OPTIMIZING) +### This cranks the optimization level to maximize speed +cdebug = -O2 -Op -Gs +!else +cdebug = +!endif +!else if "$(MACHINE)" == "IA64" +### Warnings are too many, can't support warnings into errors. +cdebug = -Z7 -Od -GZ +!else +cdebug = -Z7 -WX -Od -GZ +!endif + +### Declarations common to all compiler options +cflags = -nologo -c -W3 -YX -Fp$(TMP_DIR)^\ + +!if $(MSVCRT) +!if $(DEBUG) +crt = -MDd +!else +crt = -MD +!endif +!else +!if $(DEBUG) +crt = -MTd +!else +crt = -MT +!endif +!endif + +INCLUDES = $(TCL_INCLUDES) -I"$(WINDIR)" -I"$(GENERICDIR)" \ + -I"$(ROOT)\.." +BASE_CLFAGS = $(cflags) $(cdebug) $(crt) $(INCLUDES) \ + -DSQLITE_3_SUFFIX_ONLY=1 -DSQLITE_ENABLE_RTREE=1 \ + -DSQLITE_ENABLE_FTS3=1 -DSQLITE_OMIT_DEPRECATED=1 +CON_CFLAGS = $(cflags) $(cdebug) $(crt) -DCONSOLE -DSQLITE_ENABLE_FTS3=1 +TCL_CFLAGS = -DBUILD_sqlite -DUSE_TCL_STUBS \ + -DPACKAGE_VERSION="\"$(DOTVERSION)\"" $(BASE_CLFAGS) \ + $(OPTDEFINES) + +#--------------------------------------------------------------------- +# Link flags +#--------------------------------------------------------------------- + +!if $(DEBUG) +ldebug = -debug:full -debugtype:cv +!else +ldebug = -release -opt:ref -opt:icf,3 +!endif + +### Declarations common to all linker options +lflags = -nologo -machine:$(MACHINE) $(ldebug) + +!if $(PROFILE) +lflags = $(lflags) -profile +!endif + +!if $(ALIGN98_HACK) && !$(STATIC_BUILD) +### Align sections for PE size savings. +lflags = $(lflags) -opt:nowin98 +!else if !$(ALIGN98_HACK) && $(STATIC_BUILD) +### Align sections for speed in loading by choosing the virtual page size. +lflags = $(lflags) -align:4096 +!endif + +!if $(LOIMPACT) +lflags = $(lflags) -ws:aggressive +!endif + +dlllflags = $(lflags) -dll +conlflags = $(lflags) -subsystem:console +guilflags = $(lflags) -subsystem:windows +baselibs = $(TCLSTUBLIB) + +#--------------------------------------------------------------------- +# TclTest flags +#--------------------------------------------------------------------- + +!IF "$(TESTPAT)" != "" +TESTFLAGS = $(TESTFLAGS) -file $(TESTPAT) +!ENDIF + +#--------------------------------------------------------------------- +# Project specific targets (EDIT) +#--------------------------------------------------------------------- + +all: setup $(PROJECT) +$(PROJECT): setup $(PRJLIB) +install: install-binaries install-libraries install-docs + +# Tests need to ensure we load the right dll file we +# have to handle the output differently on Win9x. +# +!if "$(OS)" == "Windows_NT" || "$(MSVCDIR)" == "IDE" +test: setup $(PROJECT) + set TCL_LIBRARY=$(ROOT)/library + $(TCLSH) << +load $(PRJLIB:\=/) +cd "$(ROOT)/tests" +set argv "$(TESTFLAGS)" +source all.tcl +<< +!else +test: setup $(PROJECT) + echo Please wait while the test results are collected + set TCL_LIBRARY=$(ROOT)/library + $(TCLSH) << >tests.log +load $(PRJLIB:\=/) +cd "$(ROOT)/tests" +set argv "$(TESTFLAGS)" +source all.tcl +<< + type tests.log | more +!endif + +setup: + @if not exist $(OUT_DIR)\nul mkdir $(OUT_DIR) + @if not exist $(TMP_DIR)\nul mkdir $(TMP_DIR) + +$(PRJLIB): $(DLLOBJS) + $(link32) $(dlllflags) -out:$@ $(baselibs) @<< +$** +<< + -@del $*.exp + +$(PRJSTUBLIB): $(PRJSTUBOBJS) + $(lib32) -nologo -out:$@ $(PRJSTUBOBJS) + +#--------------------------------------------------------------------- +# Implicit rules +#--------------------------------------------------------------------- + +{$(WINDIR)}.c{$(TMP_DIR)}.obj:: + $(cc32) $(TCL_CFLAGS) -DBUILD_$(PROJECT) -Fo$(TMP_DIR)\ @<< +$< +<< + +{$(GENERICDIR)}.c{$(TMP_DIR)}.obj:: + $(cc32) $(TCL_CFLAGS) -DBUILD_$(PROJECT) -Fo$(TMP_DIR)\ @<< +$< +<< + +{$(COMPATDIR)}.c{$(TMP_DIR)}.obj:: + $(cc32) $(TCL_CFLAGS) -DBUILD_$(PROJECT) -Fo$(TMP_DIR)\ @<< +$< +<< + +{$(WINDIR)}.rc{$(TMP_DIR)}.res: + $(rc32) -fo $@ -r -i "$(GENERICDIR)" -D__WIN32__ \ +!if $(DEBUG) + -d DEBUG \ +!endif +!if $(TCL_THREADS) + -d TCL_THREADS \ +!endif +!if $(STATIC_BUILD) + -d STATIC_BUILD \ +!endif + $< + +.SUFFIXES: +.SUFFIXES:.c .rc + +#--------------------------------------------------------------------- +# Installation. (EDIT) +# +# You may need to modify this section to reflect the final distribution +# of your files and possibly to generate documentation. +# +#--------------------------------------------------------------------- + +install-binaries: + @echo Installing binaries to '$(SCRIPT_INSTALL_DIR)' + @if not exist "$(SCRIPT_INSTALL_DIR)" mkdir "$(SCRIPT_INSTALL_DIR)" + @$(CPY) $(PRJLIB) "$(SCRIPT_INSTALL_DIR)" >NUL + +install-libraries: + @echo Installing libraries to '$(SCRIPT_INSTALL_DIR)' + @if exist $(LIBDIR) $(CPY) $(LIBDIR)\*.tcl "$(SCRIPT_INSTALL_DIR)" + @echo Installing package index in '$(SCRIPT_INSTALL_DIR)' + @type << >"$(SCRIPT_INSTALL_DIR)\pkgIndex.tcl" +package ifneeded $(PROJECT) $(DOTVERSION) \ + [list load [file join $$dir $(PRJLIBNAME)] sqlite3] +<< + +install-docs: + @echo Installing documentation files to '$(DOC_INSTALL_DIR)' + @if exist $(DOCDIR) $(CPY) $(DOCDIR)\*.n "$(DOC_INSTALL_DIR)" + +#--------------------------------------------------------------------- +# Clean up +#--------------------------------------------------------------------- + +clean: + @if exist $(TMP_DIR)\nul $(RMDIR) $(TMP_DIR) + @if exist $(WINDIR)\version.vc del $(WINDIR)\version.vc + +realclean: clean + @if exist $(OUT_DIR)\nul $(RMDIR) $(OUT_DIR) + +distclean: realclean + @if exist $(WINDIR)\nmakehlp.exe del $(WINDIR)\nmakehlp.exe + @if exist $(WINDIR)\nmakehlp.obj del $(WINDIR)\nmakehlp.obj ADDED autoconf/tea/win/nmakehlp.c Index: autoconf/tea/win/nmakehlp.c ================================================================== --- autoconf/tea/win/nmakehlp.c +++ autoconf/tea/win/nmakehlp.c @@ -0,0 +1,694 @@ +/* + * ---------------------------------------------------------------------------- + * nmakehlp.c -- + * + * This is used to fix limitations within nmake and the environment. + * + * Copyright (c) 2002 by David Gravereaux. + * Copyright (c) 2006 by Pat Thoyts + * + * See the file "license.terms" for information on usage and redistribution of + * this file, and for a DISCLAIMER OF ALL WARRANTIES. + * ---------------------------------------------------------------------------- + */ + +#define _CRT_SECURE_NO_DEPRECATE +#include +#define NO_SHLWAPI_GDI +#define NO_SHLWAPI_STREAM +#define NO_SHLWAPI_REG +#include +#pragma comment (lib, "user32.lib") +#pragma comment (lib, "kernel32.lib") +#pragma comment (lib, "shlwapi.lib") +#include +#include + +/* + * This library is required for x64 builds with _some_ versions of MSVC + */ +#if defined(_M_IA64) || defined(_M_AMD64) +#if _MSC_VER >= 1400 && _MSC_VER < 1500 +#pragma comment(lib, "bufferoverflowU") +#endif +#endif + +/* ISO hack for dumb VC++ */ +#ifdef _MSC_VER +#define snprintf _snprintf +#endif + + + +/* protos */ + +static int CheckForCompilerFeature(const char *option); +static int CheckForLinkerFeature(const char *option); +static int IsIn(const char *string, const char *substring); +static int SubstituteFile(const char *substs, const char *filename); +static int QualifyPath(const char *path); +static const char *GetVersionFromFile(const char *filename, const char *match); +static DWORD WINAPI ReadFromPipe(LPVOID args); + +/* globals */ + +#define CHUNK 25 +#define STATICBUFFERSIZE 1000 +typedef struct { + HANDLE pipe; + char buffer[STATICBUFFERSIZE]; +} pipeinfo; + +pipeinfo Out = {INVALID_HANDLE_VALUE, '\0'}; +pipeinfo Err = {INVALID_HANDLE_VALUE, '\0'}; + +/* + * exitcodes: 0 == no, 1 == yes, 2 == error + */ + +int +main( + int argc, + char *argv[]) +{ + char msg[300]; + DWORD dwWritten; + int chars; + + /* + * Make sure children (cl.exe and link.exe) are kept quiet. + */ + + SetErrorMode(SEM_FAILCRITICALERRORS | SEM_NOOPENFILEERRORBOX); + + /* + * Make sure the compiler and linker aren't effected by the outside world. + */ + + SetEnvironmentVariable("CL", ""); + SetEnvironmentVariable("LINK", ""); + + if (argc > 1 && *argv[1] == '-') { + switch (*(argv[1]+1)) { + case 'c': + if (argc != 3) { + chars = snprintf(msg, sizeof(msg) - 1, + "usage: %s -c \n" + "Tests for whether cl.exe supports an option\n" + "exitcodes: 0 == no, 1 == yes, 2 == error\n", argv[0]); + WriteFile(GetStdHandle(STD_ERROR_HANDLE), msg, chars, + &dwWritten, NULL); + return 2; + } + return CheckForCompilerFeature(argv[2]); + case 'l': + if (argc != 3) { + chars = snprintf(msg, sizeof(msg) - 1, + "usage: %s -l \n" + "Tests for whether link.exe supports an option\n" + "exitcodes: 0 == no, 1 == yes, 2 == error\n", argv[0]); + WriteFile(GetStdHandle(STD_ERROR_HANDLE), msg, chars, + &dwWritten, NULL); + return 2; + } + return CheckForLinkerFeature(argv[2]); + case 'f': + if (argc == 2) { + chars = snprintf(msg, sizeof(msg) - 1, + "usage: %s -f \n" + "Find a substring within another\n" + "exitcodes: 0 == no, 1 == yes, 2 == error\n", argv[0]); + WriteFile(GetStdHandle(STD_ERROR_HANDLE), msg, chars, + &dwWritten, NULL); + return 2; + } else if (argc == 3) { + /* + * If the string is blank, there is no match. + */ + + return 0; + } else { + return IsIn(argv[2], argv[3]); + } + case 's': + if (argc == 2) { + chars = snprintf(msg, sizeof(msg) - 1, + "usage: %s -s \n" + "Perform a set of string map type substutitions on a file\n" + "exitcodes: 0\n", + argv[0]); + WriteFile(GetStdHandle(STD_ERROR_HANDLE), msg, chars, + &dwWritten, NULL); + return 2; + } + return SubstituteFile(argv[2], argv[3]); + case 'V': + if (argc != 4) { + chars = snprintf(msg, sizeof(msg) - 1, + "usage: %s -V filename matchstring\n" + "Extract a version from a file:\n" + "eg: pkgIndex.tcl \"package ifneeded http\"", + argv[0]); + WriteFile(GetStdHandle(STD_ERROR_HANDLE), msg, chars, + &dwWritten, NULL); + return 0; + } + printf("%s\n", GetVersionFromFile(argv[2], argv[3])); + return 0; + case 'Q': + if (argc != 3) { + chars = snprintf(msg, sizeof(msg) - 1, + "usage: %s -Q path\n" + "Emit the fully qualified path\n" + "exitcodes: 0 == no, 1 == yes, 2 == error\n", argv[0]); + WriteFile(GetStdHandle(STD_ERROR_HANDLE), msg, chars, + &dwWritten, NULL); + return 2; + } + return QualifyPath(argv[2]); + } + } + chars = snprintf(msg, sizeof(msg) - 1, + "usage: %s -c|-f|-l|-Q|-s|-V ...\n" + "This is a little helper app to equalize shell differences between WinNT and\n" + "Win9x and get nmake.exe to accomplish its job.\n", + argv[0]); + WriteFile(GetStdHandle(STD_ERROR_HANDLE), msg, chars, &dwWritten, NULL); + return 2; +} + +static int +CheckForCompilerFeature( + const char *option) +{ + STARTUPINFO si; + PROCESS_INFORMATION pi; + SECURITY_ATTRIBUTES sa; + DWORD threadID; + char msg[300]; + BOOL ok; + HANDLE hProcess, h, pipeThreads[2]; + char cmdline[100]; + + hProcess = GetCurrentProcess(); + + ZeroMemory(&pi, sizeof(PROCESS_INFORMATION)); + ZeroMemory(&si, sizeof(STARTUPINFO)); + si.cb = sizeof(STARTUPINFO); + si.dwFlags = STARTF_USESTDHANDLES; + si.hStdInput = INVALID_HANDLE_VALUE; + + ZeroMemory(&sa, sizeof(SECURITY_ATTRIBUTES)); + sa.nLength = sizeof(SECURITY_ATTRIBUTES); + sa.lpSecurityDescriptor = NULL; + sa.bInheritHandle = FALSE; + + /* + * Create a non-inheritible pipe. + */ + + CreatePipe(&Out.pipe, &h, &sa, 0); + + /* + * Dupe the write side, make it inheritible, and close the original. + */ + + DuplicateHandle(hProcess, h, hProcess, &si.hStdOutput, 0, TRUE, + DUPLICATE_SAME_ACCESS | DUPLICATE_CLOSE_SOURCE); + + /* + * Same as above, but for the error side. + */ + + CreatePipe(&Err.pipe, &h, &sa, 0); + DuplicateHandle(hProcess, h, hProcess, &si.hStdError, 0, TRUE, + DUPLICATE_SAME_ACCESS | DUPLICATE_CLOSE_SOURCE); + + /* + * Base command line. + */ + + lstrcpy(cmdline, "cl.exe -nologo -c -TC -Zs -X -Fp.\\_junk.pch "); + + /* + * Append our option for testing + */ + + lstrcat(cmdline, option); + + /* + * Filename to compile, which exists, but is nothing and empty. + */ + + lstrcat(cmdline, " .\\nul"); + + ok = CreateProcess( + NULL, /* Module name. */ + cmdline, /* Command line. */ + NULL, /* Process handle not inheritable. */ + NULL, /* Thread handle not inheritable. */ + TRUE, /* yes, inherit handles. */ + DETACHED_PROCESS, /* No console for you. */ + NULL, /* Use parent's environment block. */ + NULL, /* Use parent's starting directory. */ + &si, /* Pointer to STARTUPINFO structure. */ + &pi); /* Pointer to PROCESS_INFORMATION structure. */ + + if (!ok) { + DWORD err = GetLastError(); + int chars = snprintf(msg, sizeof(msg) - 1, + "Tried to launch: \"%s\", but got error [%u]: ", cmdline, err); + + FormatMessage(FORMAT_MESSAGE_FROM_SYSTEM|FORMAT_MESSAGE_IGNORE_INSERTS| + FORMAT_MESSAGE_MAX_WIDTH_MASK, 0L, err, 0, (LPVOID)&msg[chars], + (300-chars), 0); + WriteFile(GetStdHandle(STD_ERROR_HANDLE), msg, lstrlen(msg), &err,NULL); + return 2; + } + + /* + * Close our references to the write handles that have now been inherited. + */ + + CloseHandle(si.hStdOutput); + CloseHandle(si.hStdError); + + WaitForInputIdle(pi.hProcess, 5000); + CloseHandle(pi.hThread); + + /* + * Start the pipe reader threads. + */ + + pipeThreads[0] = CreateThread(NULL, 0, ReadFromPipe, &Out, 0, &threadID); + pipeThreads[1] = CreateThread(NULL, 0, ReadFromPipe, &Err, 0, &threadID); + + /* + * Block waiting for the process to end. + */ + + WaitForSingleObject(pi.hProcess, INFINITE); + CloseHandle(pi.hProcess); + + /* + * Wait for our pipe to get done reading, should it be a little slow. + */ + + WaitForMultipleObjects(2, pipeThreads, TRUE, 500); + CloseHandle(pipeThreads[0]); + CloseHandle(pipeThreads[1]); + + /* + * Look for the commandline warning code in both streams. + * - in MSVC 6 & 7 we get D4002, in MSVC 8 we get D9002. + */ + + return !(strstr(Out.buffer, "D4002") != NULL + || strstr(Err.buffer, "D4002") != NULL + || strstr(Out.buffer, "D9002") != NULL + || strstr(Err.buffer, "D9002") != NULL + || strstr(Out.buffer, "D2021") != NULL + || strstr(Err.buffer, "D2021") != NULL); +} + +static int +CheckForLinkerFeature( + const char *option) +{ + STARTUPINFO si; + PROCESS_INFORMATION pi; + SECURITY_ATTRIBUTES sa; + DWORD threadID; + char msg[300]; + BOOL ok; + HANDLE hProcess, h, pipeThreads[2]; + char cmdline[100]; + + hProcess = GetCurrentProcess(); + + ZeroMemory(&pi, sizeof(PROCESS_INFORMATION)); + ZeroMemory(&si, sizeof(STARTUPINFO)); + si.cb = sizeof(STARTUPINFO); + si.dwFlags = STARTF_USESTDHANDLES; + si.hStdInput = INVALID_HANDLE_VALUE; + + ZeroMemory(&sa, sizeof(SECURITY_ATTRIBUTES)); + sa.nLength = sizeof(SECURITY_ATTRIBUTES); + sa.lpSecurityDescriptor = NULL; + sa.bInheritHandle = TRUE; + + /* + * Create a non-inheritible pipe. + */ + + CreatePipe(&Out.pipe, &h, &sa, 0); + + /* + * Dupe the write side, make it inheritible, and close the original. + */ + + DuplicateHandle(hProcess, h, hProcess, &si.hStdOutput, 0, TRUE, + DUPLICATE_SAME_ACCESS | DUPLICATE_CLOSE_SOURCE); + + /* + * Same as above, but for the error side. + */ + + CreatePipe(&Err.pipe, &h, &sa, 0); + DuplicateHandle(hProcess, h, hProcess, &si.hStdError, 0, TRUE, + DUPLICATE_SAME_ACCESS | DUPLICATE_CLOSE_SOURCE); + + /* + * Base command line. + */ + + lstrcpy(cmdline, "link.exe -nologo "); + + /* + * Append our option for testing. + */ + + lstrcat(cmdline, option); + + ok = CreateProcess( + NULL, /* Module name. */ + cmdline, /* Command line. */ + NULL, /* Process handle not inheritable. */ + NULL, /* Thread handle not inheritable. */ + TRUE, /* yes, inherit handles. */ + DETACHED_PROCESS, /* No console for you. */ + NULL, /* Use parent's environment block. */ + NULL, /* Use parent's starting directory. */ + &si, /* Pointer to STARTUPINFO structure. */ + &pi); /* Pointer to PROCESS_INFORMATION structure. */ + + if (!ok) { + DWORD err = GetLastError(); + int chars = snprintf(msg, sizeof(msg) - 1, + "Tried to launch: \"%s\", but got error [%u]: ", cmdline, err); + + FormatMessage(FORMAT_MESSAGE_FROM_SYSTEM|FORMAT_MESSAGE_IGNORE_INSERTS| + FORMAT_MESSAGE_MAX_WIDTH_MASK, 0L, err, 0, (LPVOID)&msg[chars], + (300-chars), 0); + WriteFile(GetStdHandle(STD_ERROR_HANDLE), msg, lstrlen(msg), &err,NULL); + return 2; + } + + /* + * Close our references to the write handles that have now been inherited. + */ + + CloseHandle(si.hStdOutput); + CloseHandle(si.hStdError); + + WaitForInputIdle(pi.hProcess, 5000); + CloseHandle(pi.hThread); + + /* + * Start the pipe reader threads. + */ + + pipeThreads[0] = CreateThread(NULL, 0, ReadFromPipe, &Out, 0, &threadID); + pipeThreads[1] = CreateThread(NULL, 0, ReadFromPipe, &Err, 0, &threadID); + + /* + * Block waiting for the process to end. + */ + + WaitForSingleObject(pi.hProcess, INFINITE); + CloseHandle(pi.hProcess); + + /* + * Wait for our pipe to get done reading, should it be a little slow. + */ + + WaitForMultipleObjects(2, pipeThreads, TRUE, 500); + CloseHandle(pipeThreads[0]); + CloseHandle(pipeThreads[1]); + + /* + * Look for the commandline warning code in the stderr stream. + */ + + return !(strstr(Out.buffer, "LNK1117") != NULL || + strstr(Err.buffer, "LNK1117") != NULL || + strstr(Out.buffer, "LNK4044") != NULL || + strstr(Err.buffer, "LNK4044") != NULL); +} + +static DWORD WINAPI +ReadFromPipe( + LPVOID args) +{ + pipeinfo *pi = (pipeinfo *) args; + char *lastBuf = pi->buffer; + DWORD dwRead; + BOOL ok; + + again: + if (lastBuf - pi->buffer + CHUNK > STATICBUFFERSIZE) { + CloseHandle(pi->pipe); + return (DWORD)-1; + } + ok = ReadFile(pi->pipe, lastBuf, CHUNK, &dwRead, 0L); + if (!ok || dwRead == 0) { + CloseHandle(pi->pipe); + return 0; + } + lastBuf += dwRead; + goto again; + + return 0; /* makes the compiler happy */ +} + +static int +IsIn( + const char *string, + const char *substring) +{ + return (strstr(string, substring) != NULL); +} + +/* + * GetVersionFromFile -- + * Looks for a match string in a file and then returns the version + * following the match where a version is anything acceptable to + * package provide or package ifneeded. + */ + +static const char * +GetVersionFromFile( + const char *filename, + const char *match) +{ + size_t cbBuffer = 100; + static char szBuffer[100]; + char *szResult = NULL; + FILE *fp = fopen(filename, "rt"); + + if (fp != NULL) { + /* + * Read data until we see our match string. + */ + + while (fgets(szBuffer, cbBuffer, fp) != NULL) { + LPSTR p, q; + + p = strstr(szBuffer, match); + if (p != NULL) { + /* + * Skip to first digit. + */ + + while (*p && !isdigit(*p)) { + ++p; + } + + /* + * Find ending whitespace. + */ + + q = p; + while (*q && (isalnum(*q) || *q == '.')) { + ++q; + } + + memcpy(szBuffer, p, q - p); + szBuffer[q-p] = 0; + szResult = szBuffer; + break; + } + } + fclose(fp); + } + return szResult; +} + +/* + * List helpers for the SubstituteFile function + */ + +typedef struct list_item_t { + struct list_item_t *nextPtr; + char * key; + char * value; +} list_item_t; + +/* insert a list item into the list (list may be null) */ +static list_item_t * +list_insert(list_item_t **listPtrPtr, const char *key, const char *value) +{ + list_item_t *itemPtr = malloc(sizeof(list_item_t)); + if (itemPtr) { + itemPtr->key = strdup(key); + itemPtr->value = strdup(value); + itemPtr->nextPtr = NULL; + + while(*listPtrPtr) { + listPtrPtr = &(*listPtrPtr)->nextPtr; + } + *listPtrPtr = itemPtr; + } + return itemPtr; +} + +static void +list_free(list_item_t **listPtrPtr) +{ + list_item_t *tmpPtr, *listPtr = *listPtrPtr; + while (listPtr) { + tmpPtr = listPtr; + listPtr = listPtr->nextPtr; + free(tmpPtr->key); + free(tmpPtr->value); + free(tmpPtr); + } +} + +/* + * SubstituteFile -- + * As windows doesn't provide anything useful like sed and it's unreliable + * to use the tclsh you are building against (consider x-platform builds - + * eg compiling AMD64 target from IX86) we provide a simple substitution + * option here to handle autoconf style substitutions. + * The substitution file is whitespace and line delimited. The file should + * consist of lines matching the regular expression: + * \s*\S+\s+\S*$ + * + * Usage is something like: + * nmakehlp -S << $** > $@ + * @PACKAGE_NAME@ $(PACKAGE_NAME) + * @PACKAGE_VERSION@ $(PACKAGE_VERSION) + * << + */ + +static int +SubstituteFile( + const char *substitutions, + const char *filename) +{ + size_t cbBuffer = 1024; + static char szBuffer[1024], szCopy[1024]; + char *szResult = NULL; + list_item_t *substPtr = NULL; + FILE *fp, *sp; + + fp = fopen(filename, "rt"); + if (fp != NULL) { + + /* + * Build a list of substutitions from the first filename + */ + + sp = fopen(substitutions, "rt"); + if (sp != NULL) { + while (fgets(szBuffer, cbBuffer, sp) != NULL) { + char *ks, *ke, *vs, *ve; + ks = szBuffer; + while (ks && *ks && isspace(*ks)) ++ks; + ke = ks; + while (ke && *ke && !isspace(*ke)) ++ke; + vs = ke; + while (vs && *vs && isspace(*vs)) ++vs; + ve = vs; + while (ve && *ve && !(*ve == '\r' || *ve == '\n')) ++ve; + *ke = 0, *ve = 0; + list_insert(&substPtr, ks, vs); + } + fclose(sp); + } + + /* debug: dump the list */ +#ifdef _DEBUG + { + int n = 0; + list_item_t *p = NULL; + for (p = substPtr; p != NULL; p = p->nextPtr, ++n) { + fprintf(stderr, "% 3d '%s' => '%s'\n", n, p->key, p->value); + } + } +#endif + + /* + * Run the substitutions over each line of the input + */ + + while (fgets(szBuffer, cbBuffer, fp) != NULL) { + list_item_t *p = NULL; + for (p = substPtr; p != NULL; p = p->nextPtr) { + char *m = strstr(szBuffer, p->key); + if (m) { + char *cp, *op, *sp; + cp = szCopy; + op = szBuffer; + while (op != m) *cp++ = *op++; + sp = p->value; + while (sp && *sp) *cp++ = *sp++; + op += strlen(p->key); + while (*op) *cp++ = *op++; + *cp = 0; + memcpy(szBuffer, szCopy, sizeof(szCopy)); + } + } + printf(szBuffer); + } + + list_free(&substPtr); + } + fclose(fp); + return 0; +} + +/* + * QualifyPath -- + * + * This composes the current working directory with a provided path + * and returns the fully qualified and normalized path. + * Mostly needed to setup paths for testing. + */ + +static int +QualifyPath( + const char *szPath) +{ + char szCwd[MAX_PATH + 1]; + char szTmp[MAX_PATH + 1]; + char *p; + GetCurrentDirectory(MAX_PATH, szCwd); + while ((p = strchr(szPath, '/')) && *p) + *p = '\\'; + PathCombine(szTmp, szCwd, szPath); + PathCanonicalize(szCwd, szTmp); + printf("%s\n", szCwd); + return 0; +} + +/* + * Local variables: + * mode: c + * c-basic-offset: 4 + * fill-column: 78 + * indent-tabs-mode: t + * tab-width: 8 + * End: + */ ADDED autoconf/tea/win/rules.vc Index: autoconf/tea/win/rules.vc ================================================================== --- autoconf/tea/win/rules.vc +++ autoconf/tea/win/rules.vc @@ -0,0 +1,711 @@ +#------------------------------------------------------------------------------ +# rules.vc -- +# +# Microsoft Visual C++ makefile include for decoding the commandline +# macros. This file does not need editing to build Tcl. +# +# See the file "license.terms" for information on usage and redistribution +# of this file, and for a DISCLAIMER OF ALL WARRANTIES. +# +# Copyright (c) 2001-2003 David Gravereaux. +# Copyright (c) 2003-2008 Patrick Thoyts +#------------------------------------------------------------------------------ + +!ifndef _RULES_VC +_RULES_VC = 1 + +cc32 = $(CC) # built-in default. +link32 = link +lib32 = lib +rc32 = $(RC) # built-in default. + +!ifndef INSTALLDIR +### Assume the normal default. +_INSTALLDIR = C:\Program Files\Tcl +!else +### Fix the path separators. +_INSTALLDIR = $(INSTALLDIR:/=\) +!endif + +#---------------------------------------------------------- +# Set the proper copy method to avoid overwrite questions +# to the user when copying files and selecting the right +# "delete all" method. +#---------------------------------------------------------- + +!if "$(OS)" == "Windows_NT" +RMDIR = rmdir /S /Q +ERRNULL = 2>NUL +!if ![ver | find "4.0" > nul] +CPY = echo y | xcopy /i >NUL +COPY = copy >NUL +!else +CPY = xcopy /i /y >NUL +COPY = copy /y >NUL +!endif +!else # "$(OS)" != "Windows_NT" +CPY = xcopy /i >_JUNK.OUT # On Win98 NUL does not work here. +COPY = copy >_JUNK.OUT # On Win98 NUL does not work here. +RMDIR = deltree /Y +NULL = \NUL # Used in testing directory existence +ERRNULL = >NUL # Win9x shell cannot redirect stderr +!endif +MKDIR = mkdir + +#------------------------------------------------------------------------------ +# Determine the host and target architectures and compiler version. +#------------------------------------------------------------------------------ + +_HASH=^# +_VC_MANIFEST_EMBED_EXE= +_VC_MANIFEST_EMBED_DLL= +VCVER=0 +!if ![echo VCVERSION=_MSC_VER > vercl.x] \ + && ![echo $(_HASH)if defined(_M_IX86) >> vercl.x] \ + && ![echo ARCH=IX86 >> vercl.x] \ + && ![echo $(_HASH)elif defined(_M_AMD64) >> vercl.x] \ + && ![echo ARCH=AMD64 >> vercl.x] \ + && ![echo $(_HASH)endif >> vercl.x] \ + && ![cl -nologo -TC -P vercl.x $(ERRNULL)] +!include vercl.i +!if ![echo VCVER= ^\> vercl.vc] \ + && ![set /a $(VCVERSION) / 100 - 6 >> vercl.vc] +!include vercl.vc +!endif +!endif +!if ![del $(ERRNUL) /q/f vercl.x vercl.i vercl.vc] +!endif + +!if ![reg query HKLM\Hardware\Description\System\CentralProcessor\0 /v Identifier | findstr /i x86] +NATIVE_ARCH=IX86 +!else +NATIVE_ARCH=AMD64 +!endif + +# Since MSVC8 we must deal with manifest resources. +!if $(VCVERSION) >= 1400 +_VC_MANIFEST_EMBED_EXE=if exist $@.manifest mt -nologo -manifest $@.manifest -outputresource:$@;1 +_VC_MANIFEST_EMBED_DLL=if exist $@.manifest mt -nologo -manifest $@.manifest -outputresource:$@;2 +!endif + +!ifndef MACHINE +MACHINE=$(ARCH) +!endif + +!ifndef CFG_ENCODING +CFG_ENCODING = \"cp1252\" +!endif + +!message =============================================================================== + +#---------------------------------------------------------- +# build the helper app we need to overcome nmake's limiting +# environment. +#---------------------------------------------------------- + +!if !exist(nmakehlp.exe) +!if [$(cc32) -nologo nmakehlp.c -link -subsystem:console > nul] +!endif +!endif + +#---------------------------------------------------------- +# Test for compiler features +#---------------------------------------------------------- + +### test for optimizations +!if [nmakehlp -c -Ot] +!message *** Compiler has 'Optimizations' +OPTIMIZING = 1 +!else +!message *** Compiler does not have 'Optimizations' +OPTIMIZING = 0 +!endif + +OPTIMIZATIONS = + +!if [nmakehlp -c -Ot] +OPTIMIZATIONS = $(OPTIMIZATIONS) -Ot +!endif + +!if [nmakehlp -c -Oi] +OPTIMIZATIONS = $(OPTIMIZATIONS) -Oi +!endif + +!if [nmakehlp -c -Op] +OPTIMIZATIONS = $(OPTIMIZATIONS) -Op +!endif + +!if [nmakehlp -c -fp:strict] +OPTIMIZATIONS = $(OPTIMIZATIONS) -fp:strict +!endif + +!if [nmakehlp -c -Gs] +OPTIMIZATIONS = $(OPTIMIZATIONS) -Gs +!endif + +!if [nmakehlp -c -GS] +OPTIMIZATIONS = $(OPTIMIZATIONS) -GS +!endif + +!if [nmakehlp -c -GL] +OPTIMIZATIONS = $(OPTIMIZATIONS) -GL +!endif + +DEBUGFLAGS = + +!if [nmakehlp -c -RTC1] +DEBUGFLAGS = $(DEBUGFLAGS) -RTC1 +!elseif [nmakehlp -c -GZ] +DEBUGFLAGS = $(DEBUGFLAGS) -GZ +!endif + +COMPILERFLAGS =-W3 -DUNICODE -D_UNICODE + +# In v13 -GL and -YX are incompatible. +!if [nmakehlp -c -YX] +!if ![nmakehlp -c -GL] +OPTIMIZATIONS = $(OPTIMIZATIONS) -YX +!endif +!endif + +!if "$(MACHINE)" == "IX86" +### test for pentium errata +!if [nmakehlp -c -QI0f] +!message *** Compiler has 'Pentium 0x0f fix' +COMPILERFLAGS = $(COMPILERFLAGS) -QI0f +!else +!message *** Compiler does not have 'Pentium 0x0f fix' +!endif +!endif + +!if "$(MACHINE)" == "IA64" +### test for Itanium errata +!if [nmakehlp -c -QIA64_Bx] +!message *** Compiler has 'B-stepping errata workarounds' +COMPILERFLAGS = $(COMPILERFLAGS) -QIA64_Bx +!else +!message *** Compiler does not have 'B-stepping errata workarounds' +!endif +!endif + +!if "$(MACHINE)" == "IX86" +### test for -align:4096, when align:512 will do. +!if [nmakehlp -l -opt:nowin98] +!message *** Linker has 'Win98 alignment problem' +ALIGN98_HACK = 1 +!else +!message *** Linker does not have 'Win98 alignment problem' +ALIGN98_HACK = 0 +!endif +!else +ALIGN98_HACK = 0 +!endif + +LINKERFLAGS = + +!if [nmakehlp -l -ltcg] +LINKERFLAGS =-ltcg +!endif + +#---------------------------------------------------------- +# Decode the options requested. +#---------------------------------------------------------- + +!if "$(OPTS)" == "" || [nmakehlp -f "$(OPTS)" "none"] +STATIC_BUILD = 0 +TCL_THREADS = 1 +DEBUG = 0 +SYMBOLS = 0 +PROFILE = 0 +PGO = 0 +MSVCRT = 0 +LOIMPACT = 0 +TCL_USE_STATIC_PACKAGES = 0 +USE_THREAD_ALLOC = 1 +UNCHECKED = 0 +!else +!if [nmakehlp -f $(OPTS) "static"] +!message *** Doing static +STATIC_BUILD = 1 +!else +STATIC_BUILD = 0 +!endif +!if [nmakehlp -f $(OPTS) "msvcrt"] +!message *** Doing msvcrt +MSVCRT = 1 +!else +MSVCRT = 0 +!endif +!if [nmakehlp -f $(OPTS) "staticpkg"] +!message *** Doing staticpkg +TCL_USE_STATIC_PACKAGES = 1 +!else +TCL_USE_STATIC_PACKAGES = 0 +!endif +!if [nmakehlp -f $(OPTS) "nothreads"] +!message *** Compile explicitly for non-threaded tcl +TCL_THREADS = 0 +!else +TCL_THREADS = 1 +USE_THREAD_ALLOC= 1 +!endif +!if [nmakehlp -f $(OPTS) "symbols"] +!message *** Doing symbols +DEBUG = 1 +!else +DEBUG = 0 +!endif +!if [nmakehlp -f $(OPTS) "pdbs"] +!message *** Doing pdbs +SYMBOLS = 1 +!else +SYMBOLS = 0 +!endif +!if [nmakehlp -f $(OPTS) "profile"] +!message *** Doing profile +PROFILE = 1 +!else +PROFILE = 0 +!endif +!if [nmakehlp -f $(OPTS) "pgi"] +!message *** Doing profile guided optimization instrumentation +PGO = 1 +!elseif [nmakehlp -f $(OPTS) "pgo"] +!message *** Doing profile guided optimization +PGO = 2 +!else +PGO = 0 +!endif +!if [nmakehlp -f $(OPTS) "loimpact"] +!message *** Doing loimpact +LOIMPACT = 1 +!else +LOIMPACT = 0 +!endif +!if [nmakehlp -f $(OPTS) "thrdalloc"] +!message *** Doing thrdalloc +USE_THREAD_ALLOC = 1 +!endif +!if [nmakehlp -f $(OPTS) "tclalloc"] +!message *** Doing tclalloc +USE_THREAD_ALLOC = 0 +!endif +!if [nmakehlp -f $(OPTS) "unchecked"] +!message *** Doing unchecked +UNCHECKED = 1 +!else +UNCHECKED = 0 +!endif +!endif + + +!if !$(STATIC_BUILD) +# Make sure we don't build overly fat DLLs. +MSVCRT = 1 +# We shouldn't statically put the extensions inside the shell when dynamic. +TCL_USE_STATIC_PACKAGES = 0 +!endif + + +#---------------------------------------------------------- +# Figure-out how to name our intermediate and output directories. +# We wouldn't want different builds to use the same .obj files +# by accident. +#---------------------------------------------------------- + +#---------------------------------------- +# Naming convention: +# t = full thread support. +# s = static library (as opposed to an +# import library) +# g = linked to the debug enabled C +# run-time. +# x = special static build when it +# links to the dynamic C run-time. +#---------------------------------------- +SUFX = tsgx + +!if $(DEBUG) +BUILDDIRTOP = Debug +!else +BUILDDIRTOP = Release +!endif + +!if "$(MACHINE)" != "IX86" +BUILDDIRTOP =$(BUILDDIRTOP)_$(MACHINE) +!endif +!if $(VCVER) > 6 +BUILDDIRTOP =$(BUILDDIRTOP)_VC$(VCVER) +!endif + +!if !$(DEBUG) || $(DEBUG) && $(UNCHECKED) +SUFX = $(SUFX:g=) +!endif + +TMP_DIRFULL = .\$(BUILDDIRTOP)\$(PROJECT)_ThreadedDynamicStaticX + +!if !$(STATIC_BUILD) +TMP_DIRFULL = $(TMP_DIRFULL:Static=) +SUFX = $(SUFX:s=) +EXT = dll +!if $(MSVCRT) +TMP_DIRFULL = $(TMP_DIRFULL:X=) +SUFX = $(SUFX:x=) +!endif +!else +TMP_DIRFULL = $(TMP_DIRFULL:Dynamic=) +EXT = lib +!if !$(MSVCRT) +TMP_DIRFULL = $(TMP_DIRFULL:X=) +SUFX = $(SUFX:x=) +!endif +!endif + +!if !$(TCL_THREADS) +TMP_DIRFULL = $(TMP_DIRFULL:Threaded=) +SUFX = $(SUFX:t=) +!endif + +!ifndef TMP_DIR +TMP_DIR = $(TMP_DIRFULL) +!ifndef OUT_DIR +OUT_DIR = .\$(BUILDDIRTOP) +!endif +!else +!ifndef OUT_DIR +OUT_DIR = $(TMP_DIR) +!endif +!endif + + +#---------------------------------------------------------- +# Decode the statistics requested. +#---------------------------------------------------------- + +!if "$(STATS)" == "" || [nmakehlp -f "$(STATS)" "none"] +TCL_MEM_DEBUG = 0 +TCL_COMPILE_DEBUG = 0 +!else +!if [nmakehlp -f $(STATS) "memdbg"] +!message *** Doing memdbg +TCL_MEM_DEBUG = 1 +!else +TCL_MEM_DEBUG = 0 +!endif +!if [nmakehlp -f $(STATS) "compdbg"] +!message *** Doing compdbg +TCL_COMPILE_DEBUG = 1 +!else +TCL_COMPILE_DEBUG = 0 +!endif +!endif + + +#---------------------------------------------------------- +# Decode the checks requested. +#---------------------------------------------------------- + +!if "$(CHECKS)" == "" || [nmakehlp -f "$(CHECKS)" "none"] +TCL_NO_DEPRECATED = 0 +WARNINGS = -W3 +!else +!if [nmakehlp -f $(CHECKS) "nodep"] +!message *** Doing nodep check +TCL_NO_DEPRECATED = 1 +!else +TCL_NO_DEPRECATED = 0 +!endif +!if [nmakehlp -f $(CHECKS) "fullwarn"] +!message *** Doing full warnings check +WARNINGS = -W4 +!if [nmakehlp -l -warn:3] +LINKERFLAGS = $(LINKERFLAGS) -warn:3 +!endif +!else +WARNINGS = -W3 +!endif +!if [nmakehlp -f $(CHECKS) "64bit"] && [nmakehlp -c -Wp64] +!message *** Doing 64bit portability warnings +WARNINGS = $(WARNINGS) -Wp64 +!endif +!endif + +!if $(PGO) > 1 +!if [nmakehlp -l -ltcg:pgoptimize] +LINKERFLAGS = $(LINKERFLAGS:-ltcg=) -ltcg:pgoptimize +!else +MSG=^ +This compiler does not support profile guided optimization. +!error $(MSG) +!endif +!elseif $(PGO) > 0 +!if [nmakehlp -l -ltcg:pginstrument] +LINKERFLAGS = $(LINKERFLAGS:-ltcg=) -ltcg:pginstrument +!else +MSG=^ +This compiler does not support profile guided optimization. +!error $(MSG) +!endif +!endif + +#---------------------------------------------------------- +# Set our defines now armed with our options. +#---------------------------------------------------------- + +OPTDEFINES = -DTCL_CFGVAL_ENCODING=$(CFG_ENCODING) -DSTDC_HEADERS + +!if $(TCL_MEM_DEBUG) +OPTDEFINES = $(OPTDEFINES) -DTCL_MEM_DEBUG +!endif +!if $(TCL_COMPILE_DEBUG) +OPTDEFINES = $(OPTDEFINES) -DTCL_COMPILE_DEBUG -DTCL_COMPILE_STATS +!endif +!if $(TCL_THREADS) +OPTDEFINES = $(OPTDEFINES) -DTCL_THREADS=1 +!if $(USE_THREAD_ALLOC) +OPTDEFINES = $(OPTDEFINES) -DUSE_THREAD_ALLOC=1 +!endif +!endif +!if $(STATIC_BUILD) +OPTDEFINES = $(OPTDEFINES) -DSTATIC_BUILD +!endif +!if $(TCL_NO_DEPRECATED) +OPTDEFINES = $(OPTDEFINES) -DTCL_NO_DEPRECATED +!endif + +!if !$(DEBUG) +OPTDEFINES = $(OPTDEFINES) -DNDEBUG +!if $(OPTIMIZING) +OPTDEFINES = $(OPTDEFINES) -DTCL_CFG_OPTIMIZED +!endif +!endif +!if $(PROFILE) +OPTDEFINES = $(OPTDEFINES) -DTCL_CFG_PROFILED +!endif +!if "$(MACHINE)" == "IA64" || "$(MACHINE)" == "AMD64" +OPTDEFINES = $(OPTDEFINES) -DTCL_CFG_DO64BIT +!endif +!if $(VCVERSION) < 1300 +OPTDEFINES = $(OPTDEFINES) -DNO_STRTOI64 +!endif + +#---------------------------------------------------------- +# Locate the Tcl headers to build against +#---------------------------------------------------------- + +!if "$(PROJECT)" == "tcl" + +_TCL_H = ..\generic\tcl.h + +!else + +# If INSTALLDIR set to tcl root dir then reset to the lib dir. +!if exist("$(_INSTALLDIR)\include\tcl.h") +_INSTALLDIR=$(_INSTALLDIR)\lib +!endif + +!if !defined(TCLDIR) +!if exist("$(_INSTALLDIR)\..\include\tcl.h") +TCLINSTALL = 1 +_TCLDIR = $(_INSTALLDIR)\.. +_TCL_H = $(_INSTALLDIR)\..\include\tcl.h +TCLDIR = $(_INSTALLDIR)\.. +!else +MSG=^ +Failed to find tcl.h. Set the TCLDIR macro. +!error $(MSG) +!endif +!else +_TCLDIR = $(TCLDIR:/=\) +!if exist("$(_TCLDIR)\include\tcl.h") +TCLINSTALL = 1 +_TCL_H = $(_TCLDIR)\include\tcl.h +!elseif exist("$(_TCLDIR)\generic\tcl.h") +TCLINSTALL = 0 +_TCL_H = $(_TCLDIR)\generic\tcl.h +!else +MSG =^ +Failed to find tcl.h. The TCLDIR macro does not appear correct. +!error $(MSG) +!endif +!endif +!endif + +#-------------------------------------------------------------- +# Extract various version numbers from tcl headers +# The generated file is then included in the makefile. +#-------------------------------------------------------------- + +!if [echo REM = This file is generated from rules.vc > versions.vc] +!endif +!if [echo TCL_MAJOR_VERSION = \>> versions.vc] \ + && [nmakehlp -V "$(_TCL_H)" TCL_MAJOR_VERSION >> versions.vc] +!endif +!if [echo TCL_MINOR_VERSION = \>> versions.vc] \ + && [nmakehlp -V "$(_TCL_H)" TCL_MINOR_VERSION >> versions.vc] +!endif +!if [echo TCL_PATCH_LEVEL = \>> versions.vc] \ + && [nmakehlp -V "$(_TCL_H)" TCL_PATCH_LEVEL >> versions.vc] +!endif + +# If building the tcl core then we need additional package versions +!if "$(PROJECT)" == "tcl" +!if [echo PKG_HTTP_VER = \>> versions.vc] \ + && [nmakehlp -V ..\library\http\pkgIndex.tcl http >> versions.vc] +!endif +!if [echo PKG_TCLTEST_VER = \>> versions.vc] \ + && [nmakehlp -V ..\library\tcltest\pkgIndex.tcl tcltest >> versions.vc] +!endif +!if [echo PKG_MSGCAT_VER = \>> versions.vc] \ + && [nmakehlp -V ..\library\msgcat\pkgIndex.tcl msgcat >> versions.vc] +!endif +!if [echo PKG_PLATFORM_VER = \>> versions.vc] \ + && [nmakehlp -V ..\library\platform\pkgIndex.tcl "platform " >> versions.vc] +!endif +!if [echo PKG_SHELL_VER = \>> versions.vc] \ + && [nmakehlp -V ..\library\platform\pkgIndex.tcl "platform::shell" >> versions.vc] +!endif +!if [echo PKG_DDE_VER = \>> versions.vc] \ + && [nmakehlp -V ..\library\dde\pkgIndex.tcl "dde " >> versions.vc] +!endif +!if [echo PKG_REG_VER =\>> versions.vc] \ + && [nmakehlp -V ..\library\reg\pkgIndex.tcl registry >> versions.vc] +!endif +!endif + +!include versions.vc + +#-------------------------------------------------------------- +# Setup tcl version dependent stuff headers +#-------------------------------------------------------------- + +!if "$(PROJECT)" != "tcl" + +TCL_VERSION = $(TCL_MAJOR_VERSION)$(TCL_MINOR_VERSION) + +!if $(TCL_VERSION) < 81 +TCL_DOES_STUBS = 0 +!else +TCL_DOES_STUBS = 1 +!endif + +!if $(TCLINSTALL) +TCLSH = "$(_TCLDIR)\bin\tclsh$(TCL_VERSION)$(SUFX).exe" +!if !exist($(TCLSH)) && $(TCL_THREADS) +TCLSH = "$(_TCLDIR)\bin\tclsh$(TCL_VERSION)t$(SUFX).exe" +!endif +TCLSTUBLIB = "$(_TCLDIR)\lib\tclstub$(TCL_VERSION).lib" +TCLIMPLIB = "$(_TCLDIR)\lib\tcl$(TCL_VERSION)$(SUFX).lib" +TCL_LIBRARY = $(_TCLDIR)\lib +TCLREGLIB = "$(_TCLDIR)\lib\tclreg13$(SUFX:t=).lib" +TCLDDELIB = "$(_TCLDIR)\lib\tcldde14$(SUFX:t=).lib" +COFFBASE = \must\have\tcl\sources\to\build\this\target +TCLTOOLSDIR = \must\have\tcl\sources\to\build\this\target +TCL_INCLUDES = -I"$(_TCLDIR)\include" +!else +TCLSH = "$(_TCLDIR)\win\$(BUILDDIRTOP)\tclsh$(TCL_VERSION)$(SUFX).exe" +!if !exist($(TCLSH)) && $(TCL_THREADS) +TCLSH = "$(_TCLDIR)\win\$(BUILDDIRTOP)\tclsh$(TCL_VERSION)t$(SUFX).exe" +!endif +TCLSTUBLIB = "$(_TCLDIR)\win\$(BUILDDIRTOP)\tclstub$(TCL_VERSION).lib" +TCLIMPLIB = "$(_TCLDIR)\win\$(BUILDDIRTOP)\tcl$(TCL_VERSION)$(SUFX).lib" +TCL_LIBRARY = $(_TCLDIR)\library +TCLREGLIB = "$(_TCLDIR)\win\$(BUILDDIRTOP)\tclreg13$(SUFX:t=).lib" +TCLDDELIB = "$(_TCLDIR)\win\$(BUILDDIRTOP)\tcldde14$(SUFX:t=).lib" +COFFBASE = "$(_TCLDIR)\win\coffbase.txt" +TCLTOOLSDIR = $(_TCLDIR)\tools +TCL_INCLUDES = -I"$(_TCLDIR)\generic" -I"$(_TCLDIR)\win" +!endif + +!endif + +#------------------------------------------------------------------------- +# Locate the Tk headers to build against +#------------------------------------------------------------------------- + +!if "$(PROJECT)" == "tk" +_TK_H = ..\generic\tk.h +_INSTALLDIR = $(_INSTALLDIR)\.. +!endif + +!ifdef PROJECT_REQUIRES_TK +!if !defined(TKDIR) +!if exist("$(_INSTALLDIR)\..\include\tk.h") +TKINSTALL = 1 +_TKDIR = $(_INSTALLDIR)\.. +_TK_H = $(_TKDIR)\include\tk.h +TKDIR = $(_TKDIR) +!elseif exist("$(_TCLDIR)\include\tk.h") +TKINSTALL = 1 +_TKDIR = $(_TCLDIR) +_TK_H = $(_TKDIR)\include\tk.h +TKDIR = $(_TKDIR) +!endif +!else +_TKDIR = $(TKDIR:/=\) +!if exist("$(_TKDIR)\include\tk.h") +TKINSTALL = 1 +_TK_H = $(_TKDIR)\include\tk.h +!elseif exist("$(_TKDIR)\generic\tk.h") +TKINSTALL = 0 +_TK_H = $(_TKDIR)\generic\tk.h +!else +MSG =^ +Failed to find tk.h. The TKDIR macro does not appear correct. +!error $(MSG) +!endif +!endif +!endif + +#------------------------------------------------------------------------- +# Extract Tk version numbers +#------------------------------------------------------------------------- + +!if defined(PROJECT_REQUIRES_TK) || "$(PROJECT)" == "tk" + +!if [echo TK_MAJOR_VERSION = \>> versions.vc] \ + && [nmakehlp -V $(_TK_H) TK_MAJOR_VERSION >> versions.vc] +!endif +!if [echo TK_MINOR_VERSION = \>> versions.vc] \ + && [nmakehlp -V $(_TK_H) TK_MINOR_VERSION >> versions.vc] +!endif +!if [echo TK_PATCH_LEVEL = \>> versions.vc] \ + && [nmakehlp -V $(_TK_H) TK_PATCH_LEVEL >> versions.vc] +!endif + +!include versions.vc + +TK_DOTVERSION = $(TK_MAJOR_VERSION).$(TK_MINOR_VERSION) +TK_VERSION = $(TK_MAJOR_VERSION)$(TK_MINOR_VERSION) + +!if "$(PROJECT)" != "tk" +!if $(TKINSTALL) +WISH = "$(_TKDIR)\bin\wish$(TK_VERSION)$(SUFX).exe" +TKSTUBLIB = "$(_TKDIR)\lib\tkstub$(TK_VERSION).lib" +TKIMPLIB = "$(_TKDIR)\lib\tk$(TK_VERSION)$(SUFX).lib" +TK_INCLUDES = -I"$(_TKDIR)\include" +!else +WISH = "$(_TKDIR)\win\$(BUILDDIRTOP)\wish$(TCL_VERSION)$(SUFX).exe" +TKSTUBLIB = "$(_TKDIR)\win\$(BUILDDIRTOP)\tkstub$(TCL_VERSION).lib" +TKIMPLIB = "$(_TKDIR)\win\$(BUILDDIRTOP)\tk$(TCL_VERSION)$(SUFX).lib" +TK_INCLUDES = -I"$(_TKDIR)\generic" -I"$(_TKDIR)\win" -I"$(_TKDIR)\xlib" +!endif +!endif + +!endif + +#---------------------------------------------------------- +# Display stats being used. +#---------------------------------------------------------- + +!message *** Intermediate directory will be '$(TMP_DIR)' +!message *** Output directory will be '$(OUT_DIR)' +!message *** Suffix for binaries will be '$(SUFX)' +!message *** Optional defines are '$(OPTDEFINES)' +!message *** Compiler version $(VCVER). Target machine is $(MACHINE) +!message *** Host architecture is $(NATIVE_ARCH) +!message *** Compiler options '$(COMPILERFLAGS) $(OPTIMIZATIONS) $(DEBUGFLAGS) $(WARNINGS)' +!message *** Link options '$(LINKERFLAGS)' + +!endif + Index: configure ================================================================== --- configure +++ configure @@ -1,8 +1,8 @@ #! /bin/sh # Guess values for system-dependent variables and create Makefiles. -# Generated by GNU Autoconf 2.62 for sqlite 3.7.14. +# Generated by GNU Autoconf 2.62 for sqlite 3.8.4.1. # # Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, # 2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. # This configure script is free software; the Free Software Foundation # gives unlimited permission to copy, distribute and modify it. @@ -741,12 +741,12 @@ SHELL=${CONFIG_SHELL-/bin/sh} # Identity of this package. PACKAGE_NAME='sqlite' PACKAGE_TARNAME='sqlite' -PACKAGE_VERSION='3.7.14' -PACKAGE_STRING='sqlite 3.7.14' +PACKAGE_VERSION='3.8.4.1' +PACKAGE_STRING='sqlite 3.8.4.1' PACKAGE_BUGREPORT='' # Factoring default headers for most tests. ac_includes_default="\ #include @@ -872,16 +872,14 @@ ALLOWRELEASE TEMP_STORE BUILD_EXEEXT SQLITE_OS_UNIX SQLITE_OS_WIN -SQLITE_OS_OS2 TARGET_EXEEXT TCL_VERSION TCL_BIN_DIR TCL_SRC_DIR -TCL_LIBS TCL_INCLUDE_SPEC TCL_LIB_FILE TCL_LIB_FLAG TCL_LIB_SPEC TCL_STUB_LIB_FILE @@ -1483,11 +1481,11 @@ # if test "$ac_init_help" = "long"; then # Omit some internal or obsolete options to make the list less imposing. # This message is too long to be a string in the A/UX 3.1 sh. cat <<_ACEOF -\`configure' configures sqlite 3.7.14 to adapt to many kinds of systems. +\`configure' configures sqlite 3.8.4.1 to adapt to many kinds of systems. Usage: $0 [OPTION]... [VAR=VALUE]... To assign environment variables (e.g., CC, CFLAGS...), specify them as VAR=VALUE. See below for descriptions of some of the useful variables. @@ -1548,11 +1546,11 @@ _ACEOF fi if test -n "$ac_init_help"; then case $ac_init_help in - short | recursive ) echo "Configuration of sqlite 3.7.14:";; + short | recursive ) echo "Configuration of sqlite 3.8.4.1:";; esac cat <<\_ACEOF Optional Features: --disable-option-checking ignore unrecognized --enable/--with options @@ -1664,11 +1662,11 @@ fi test -n "$ac_init_help" && exit $ac_status if $ac_init_version; then cat <<\_ACEOF -sqlite configure 3.7.14 +sqlite configure 3.8.4.1 generated by GNU Autoconf 2.62 Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. This configure script is free software; the Free Software Foundation @@ -1678,11 +1676,11 @@ fi cat >config.log <<_ACEOF This file contains any messages produced by compilers while running configure, to aid debugging if configure makes a mistake. -It was created by sqlite $as_me 3.7.14, which was +It was created by sqlite $as_me 3.8.4.1, which was generated by GNU Autoconf 2.62. Invocation command line was $ $0 $@ _ACEOF @@ -3732,17 +3730,17 @@ if test "${lt_cv_nm_interface+set}" = set; then $as_echo_n "(cached) " >&6 else lt_cv_nm_interface="BSD nm" echo "int some_variable = 0;" > conftest.$ac_ext - (eval echo "\"\$as_me:3737: $ac_compile\"" >&5) + (eval echo "\"\$as_me:3735: $ac_compile\"" >&5) (eval "$ac_compile" 2>conftest.err) cat conftest.err >&5 - (eval echo "\"\$as_me:3740: $NM \\\"conftest.$ac_objext\\\"\"" >&5) + (eval echo "\"\$as_me:3738: $NM \\\"conftest.$ac_objext\\\"\"" >&5) (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out) cat conftest.err >&5 - (eval echo "\"\$as_me:3743: output\"" >&5) + (eval echo "\"\$as_me:3741: output\"" >&5) cat conftest.out >&5 if $GREP 'External.*some_variable' conftest.out > /dev/null; then lt_cv_nm_interface="MS dumpbin" fi rm -f conftest* @@ -4960,11 +4958,11 @@ fi rm -rf conftest* ;; *-*-irix6*) # Find out which ABI we are using. - echo '#line 4965 "configure"' > conftest.$ac_ext + echo '#line 4963 "configure"' > conftest.$ac_ext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; then @@ -6829,15 +6827,15 @@ # The option is referenced via a variable to avoid confusing sed. lt_compile=`echo "$ac_compile" | $SED \ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:6834: $lt_compile\"" >&5) + (eval echo "\"\$as_me:6832: $lt_compile\"" >&5) (eval "$lt_compile" 2>conftest.err) ac_status=$? cat conftest.err >&5 - echo "$as_me:6838: \$? = $ac_status" >&5 + echo "$as_me:6836: \$? = $ac_status" >&5 if (exit $ac_status) && test -s "$ac_outfile"; then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings other than the usual output. $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 @@ -7168,15 +7166,15 @@ # The option is referenced via a variable to avoid confusing sed. lt_compile=`echo "$ac_compile" | $SED \ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:7173: $lt_compile\"" >&5) + (eval echo "\"\$as_me:7171: $lt_compile\"" >&5) (eval "$lt_compile" 2>conftest.err) ac_status=$? cat conftest.err >&5 - echo "$as_me:7177: \$? = $ac_status" >&5 + echo "$as_me:7175: \$? = $ac_status" >&5 if (exit $ac_status) && test -s "$ac_outfile"; then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings other than the usual output. $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 @@ -7273,15 +7271,15 @@ # with a dollar sign (not a hyphen), so the echo should work correctly. lt_compile=`echo "$ac_compile" | $SED \ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:7278: $lt_compile\"" >&5) + (eval echo "\"\$as_me:7276: $lt_compile\"" >&5) (eval "$lt_compile" 2>out/conftest.err) ac_status=$? cat out/conftest.err >&5 - echo "$as_me:7282: \$? = $ac_status" >&5 + echo "$as_me:7280: \$? = $ac_status" >&5 if (exit $ac_status) && test -s out/conftest2.$ac_objext then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp @@ -7328,15 +7326,15 @@ # with a dollar sign (not a hyphen), so the echo should work correctly. lt_compile=`echo "$ac_compile" | $SED \ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:7333: $lt_compile\"" >&5) + (eval echo "\"\$as_me:7331: $lt_compile\"" >&5) (eval "$lt_compile" 2>out/conftest.err) ac_status=$? cat out/conftest.err >&5 - echo "$as_me:7337: \$? = $ac_status" >&5 + echo "$as_me:7335: \$? = $ac_status" >&5 if (exit $ac_status) && test -s out/conftest2.$ac_objext then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp @@ -10141,11 +10139,11 @@ lt_cv_dlopen_self=cross else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 10146 "configure" +#line 10144 "configure" #include "confdefs.h" #if HAVE_DLFCN_H #include #endif @@ -10237,11 +10235,11 @@ lt_cv_dlopen_self_static=cross else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 10242 "configure" +#line 10240 "configure" #include "confdefs.h" #if HAVE_DLFCN_H #include #endif @@ -12256,11 +12254,11 @@ ######### # See whether we can run specific tclsh versions known to work well; # if not, then we fall back to plain tclsh. # TODO: try other versions before falling back? # -for ac_prog in tclsh8.5 tclsh +for ac_prog in tclsh8.6 tclsh8.5 tclsh do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 { $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } @@ -12712,28 +12710,18 @@ TARGET_EXEEXT=$BUILD_EXEEXT else TARGET_EXEEXT=$config_TARGET_EXEEXT fi if test "$TARGET_EXEEXT" = ".exe"; then - if test $OS2_SHELL ; then - SQLITE_OS_UNIX=0 - SQLITE_OS_WIN=0 - SQLITE_OS_OS2=1 - CFLAGS="$CFLAGS -DSQLITE_OS_OS2=1" - else - SQLITE_OS_UNIX=0 - SQLITE_OS_WIN=1 - SQLITE_OS_OS2=0 - CFLAGS="$CFLAGS -DSQLITE_OS_WIN=1" - fi + SQLITE_OS_UNIX=0 + SQLITE_OS_WIN=1 + CFLAGS="$CFLAGS -DSQLITE_OS_WIN=1" else SQLITE_OS_UNIX=1 SQLITE_OS_WIN=0 - SQLITE_OS_OS2=0 CFLAGS="$CFLAGS -DSQLITE_OS_UNIX=1" fi - @@ -12894,11 +12882,10 @@ eval "TCL_LIB_SPEC=\"${TCL_LIB_SPEC}\"" eval "TCL_STUB_LIB_FILE=\"${TCL_STUB_LIB_FILE}\"" eval "TCL_STUB_LIB_FLAG=\"${TCL_STUB_LIB_FLAG}\"" eval "TCL_STUB_LIB_SPEC=\"${TCL_STUB_LIB_SPEC}\"" - @@ -14032,11 +14019,11 @@ # Save the log message, to keep $[0] and so on meaningful, and to # report actual input values of CONFIG_FILES etc. instead of their # values after options handling. ac_log=" -This file was extended by sqlite $as_me 3.7.14, which was +This file was extended by sqlite $as_me 3.8.4.1, which was generated by GNU Autoconf 2.62. Invocation command line was CONFIG_FILES = $CONFIG_FILES CONFIG_HEADERS = $CONFIG_HEADERS CONFIG_LINKS = $CONFIG_LINKS @@ -14085,11 +14072,11 @@ Report bugs to ." _ACEOF cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 ac_cs_version="\\ -sqlite config.status 3.7.14 +sqlite config.status 3.8.4.1 configured by $0, generated by GNU Autoconf 2.62, with options \\"`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`\\" Copyright (C) 2008 Free Software Foundation, Inc. This config.status script is free software; the Free Software Foundation Index: configure.ac ================================================================== --- configure.ac +++ configure.ac @@ -137,11 +137,11 @@ ######### # See whether we can run specific tclsh versions known to work well; # if not, then we fall back to plain tclsh. # TODO: try other versions before falling back? # -AC_CHECK_PROGS(TCLSH_CMD, [tclsh8.5 tclsh], none) +AC_CHECK_PROGS(TCLSH_CMD, [tclsh8.6 tclsh8.5 tclsh], none) if test "$TCLSH_CMD" = "none"; then # If we can't find a local tclsh, then building the amalgamation will fail. # We act as though --disable-amalgamation has been used. echo "Warning: can't find tclsh - defaulting to non-amalgamation build." USE_AMALGAMATION=0 @@ -338,32 +338,22 @@ TARGET_EXEEXT=$BUILD_EXEEXT else TARGET_EXEEXT=$config_TARGET_EXEEXT fi if test "$TARGET_EXEEXT" = ".exe"; then - if test $OS2_SHELL ; then - SQLITE_OS_UNIX=0 - SQLITE_OS_WIN=0 - SQLITE_OS_OS2=1 - CFLAGS="$CFLAGS -DSQLITE_OS_OS2=1" - else - SQLITE_OS_UNIX=0 - SQLITE_OS_WIN=1 - SQLITE_OS_OS2=0 - CFLAGS="$CFLAGS -DSQLITE_OS_WIN=1" - fi + SQLITE_OS_UNIX=0 + SQLITE_OS_WIN=1 + CFLAGS="$CFLAGS -DSQLITE_OS_WIN=1" else SQLITE_OS_UNIX=1 SQLITE_OS_WIN=0 - SQLITE_OS_OS2=0 CFLAGS="$CFLAGS -DSQLITE_OS_UNIX=1" fi AC_SUBST(BUILD_EXEEXT) AC_SUBST(SQLITE_OS_UNIX) AC_SUBST(SQLITE_OS_WIN) -AC_SUBST(SQLITE_OS_OS2) AC_SUBST(TARGET_EXEEXT) ########## # Figure out all the parameters needed to compile against Tcl. # @@ -499,11 +489,10 @@ eval "TCL_STUB_LIB_SPEC=\"${TCL_STUB_LIB_SPEC}\"" AC_SUBST(TCL_VERSION) AC_SUBST(TCL_BIN_DIR) AC_SUBST(TCL_SRC_DIR) - AC_SUBST(TCL_LIBS) AC_SUBST(TCL_INCLUDE_SPEC) AC_SUBST(TCL_LIB_FILE) AC_SUBST(TCL_LIB_FLAG) AC_SUBST(TCL_LIB_SPEC) Index: doc/lemon.html ================================================================== --- doc/lemon.html +++ doc/lemon.html @@ -479,11 +479,11 @@ precedence of the rule to reduce, then resolve in favor of the reduce action. No parsing conflict is reported.
  • If the precedences are the same and the shift token is right-associative, then resolve in favor of the shift. No parsing conflict is reported. -
  • If the precedences are the same the the shift token is +
  • If the precedences are the same the shift token is left-associative, then resolve in favor of the reduce. No parsing conflict is reported.
  • Otherwise, resolve the conflict by doing the shift and report the parsing conflict. Index: doc/pager-invariants.txt ================================================================== --- doc/pager-invariants.txt +++ doc/pager-invariants.txt @@ -42,11 +42,11 @@ (6) If a master journal file is used, then all writes to the database file are synced prior to the master journal being deleted. *** Definition: Two databases (or the same database at two points it time) are said to be "logically equivalent" if they give the same answer to - all queries. Note in particular the the content of freelist leaf + all queries. Note in particular the content of freelist leaf pages can be changed arbitarily without effecting the logical equivalence of the database. (7) At any time, if any subset, including the empty set and the total set, of the unsynced changes to a rollback journal are removed and the Index: ext/async/README.txt ================================================================== --- ext/async/README.txt +++ ext/async/README.txt @@ -1,5 +1,12 @@ +NOTE (2012-11-29): + +The functionality implemented by this extension has been superseded +by WAL-mode. This module is no longer supported or maintained. The +code is retained for historical reference only. + +------------------------------------------------------------------------------ Normally, when SQLite writes to a database file, it waits until the write operation is finished before returning control to the calling application. Since writing to the file-system is usually very slow compared with CPU bound operations, this can be a performance bottleneck. This directory @@ -159,6 +166,5 @@ static void async_cond_signal(int eCond); static void async_sched_yield(void); The functionality required of each of the above functions is described in comments in sqlite3async.c. - Index: ext/async/sqlite3async.c ================================================================== --- ext/async/sqlite3async.c +++ ext/async/sqlite3async.c @@ -1508,10 +1508,11 @@ } case ASYNC_DELETE: ASYNC_TRACE(("DELETE %s\n", p->zBuf)); rc = pVfs->xDelete(pVfs, p->zBuf, (int)p->iOffset); + if( rc==SQLITE_IOERR_DELETE_NOENT ) rc = SQLITE_OK; break; case ASYNC_OPENEXCLUSIVE: { int flags = (int)p->iOffset; AsyncFileData *pData = p->pFileData; Index: ext/async/sqlite3async.h ================================================================== --- ext/async/sqlite3async.h +++ ext/async/sqlite3async.h @@ -73,11 +73,11 @@ ** sqlite3_vfs_unregister(). ** ** On win32 platforms, this function also releases the small number of ** critical section and event objects created by sqlite3async_initialize(). */ -void sqlite3async_shutdown(); +void sqlite3async_shutdown(void); /* ** This function may only be called when the asynchronous IO VFS is ** installed (after a call to sqlite3async_initialize()). It processes ** zero or more queued write operations before returning. It is expected @@ -92,11 +92,11 @@ ** then blocks waiting for new ones. ** ** If multiple simultaneous calls are made to sqlite3async_run() from two ** or more threads, then the calls are serialized internally. */ -void sqlite3async_run(); +void sqlite3async_run(void); /* ** This function may only be called when the asynchronous IO VFS is ** installed (after a call to sqlite3async_initialize()). It is used ** to query or configure various parameters that affect the operation Index: ext/fts1/ft_hash.h ================================================================== --- ext/fts1/ft_hash.h +++ ext/fts1/ft_hash.h @@ -7,11 +7,11 @@ ** May you do good and not evil. ** May you find forgiveness for yourself and forgive others. ** May you share freely, never taking more than you give. ** ************************************************************************* -** This is the header file for the generic hash-table implemenation +** This is the header file for the generic hash-table implementation ** used in SQLite. We've modified it slightly to serve as a standalone ** hash table implementation for the full-text indexing module. ** */ #ifndef _HASH_H_ Index: ext/fts1/fts1.c ================================================================== --- ext/fts1/fts1.c +++ ext/fts1/fts1.c @@ -3333,13 +3333,16 @@ sqlite3_overload_function(db, "offsets", -1); return sqlite3_create_module(db, "fts1", &fulltextModule, 0); } #if !SQLITE_CORE -int sqlite3_extension_init(sqlite3 *db, char **pzErrMsg, - const sqlite3_api_routines *pApi){ +#ifdef _WIN32 +__declspec(dllexport) +#endif +int sqlite3_fts1_init(sqlite3 *db, char **pzErrMsg, + const sqlite3_api_routines *pApi){ SQLITE_EXTENSION_INIT2(pApi) return sqlite3Fts1Init(db); } #endif #endif /* !defined(SQLITE_CORE) || defined(SQLITE_ENABLE_FTS1) */ Index: ext/fts1/fts1_hash.h ================================================================== --- ext/fts1/fts1_hash.h +++ ext/fts1/fts1_hash.h @@ -7,11 +7,11 @@ ** May you do good and not evil. ** May you find forgiveness for yourself and forgive others. ** May you share freely, never taking more than you give. ** ************************************************************************* -** This is the header file for the generic hash-table implemenation +** This is the header file for the generic hash-table implementation ** used in SQLite. We've modified it slightly to serve as a standalone ** hash table implementation for the full-text indexing module. ** */ #ifndef _FTS1_HASH_H_ Index: ext/fts1/fulltext.c ================================================================== --- ext/fts1/fulltext.c +++ ext/fts1/fulltext.c @@ -850,12 +850,18 @@ ** argv[1] - database name ** argv[2] - table name ** argv[3] - tokenizer name (optional, a sensible default is provided) ** argv[4..] - passed to tokenizer (optional based on tokenizer) **/ -static int fulltextConnect(sqlite3 *db, void *pAux, int argc, char **argv, - sqlite3_vtab **ppVTab){ +static int fulltextConnect( + sqlite3 *db, + void *pAux, + int argc, + const char * const *argv, + sqlite3_vtab **ppVTab, + char **pzErr +){ int rc; fulltext_vtab *v; sqlite3_tokenizer_module *m = NULL; assert( argc>=3 ); @@ -896,12 +902,18 @@ *ppVTab = &v->base; return SQLITE_OK; } -static int fulltextCreate(sqlite3 *db, void *pAux, int argc, char **argv, - sqlite3_vtab **ppVTab){ +static int fulltextCreate( + sqlite3 *db, + void *pAux, + int argc, + const char * const *argv, + sqlite3_vtab **ppVTab, + char **pzErr +){ int rc; assert( argc>=3 ); /* The %_content table holds the text of each full-text item, with ** the rowid used as the docid. @@ -932,11 +944,11 @@ "create table %_content(content text);" "create table %_term(term text, first integer, doclist blob);" "create index %_index on %_term(term, first)"); if( rc!=SQLITE_OK ) return rc; - return fulltextConnect(db, pAux, argc, argv, ppVTab); + return fulltextConnect(db, pAux, argc, argv, ppVTab, pzErr); } /* Decide how to handle an SQL query. * At the moment, MATCH queries can include implicit boolean ANDs; we * haven't implemented phrase searches or OR yet. */ @@ -1486,11 +1498,14 @@ int fulltext_init(sqlite3 *db){ return sqlite3_create_module(db, "fulltext", &fulltextModule, 0); } #if !SQLITE_CORE -int sqlite3_extension_init(sqlite3 *db, char **pzErrMsg, - const sqlite3_api_routines *pApi){ +#ifdef _WIN32 +__declspec(dllexport) +#endif +int sqlite3_fulltext_init(sqlite3 *db, char **pzErrMsg, + const sqlite3_api_routines *pApi){ SQLITE_EXTENSION_INIT2(pApi) return fulltext_init(db); } #endif Index: ext/fts2/fts2.c ================================================================== --- ext/fts2/fts2.c +++ ext/fts2/fts2.c @@ -5049,11 +5049,11 @@ ** should be check-in function for all statement handles which ** arranges to call sqlite3_reset(). This most likely will require ** modification to control flow all over the place, though, so for now ** just punt. ** -** Note the the current system assumes that segment merges will run to +** Note the current system assumes that segment merges will run to ** completion, which is why this particular probably hasn't arisen in ** this case. Probably a brittle assumption. */ static int leavesReaderReset(LeavesReader *pReader){ return sqlite3_reset(pReader->pStmt); @@ -6777,11 +6777,11 @@ void sqlite3Fts2IcuTokenizerModule(sqlite3_tokenizer_module const**ppModule); int sqlite3Fts2InitHashTable(sqlite3 *, fts2Hash *, const char *); /* -** Initialise the fts2 extension. If this extension is built as part +** Initialize the fts2 extension. If this extension is built as part ** of the sqlite library, then this function is called directly by ** SQLite. If fts2 is built as a dynamically loadable extension, this ** function is called by the sqlite3_extension_init() entry point. */ int sqlite3Fts2Init(sqlite3 *db){ @@ -6795,11 +6795,11 @@ sqlite3Fts2PorterTokenizerModule(&pPorter); #ifdef SQLITE_ENABLE_ICU sqlite3Fts2IcuTokenizerModule(&pIcu); #endif - /* Allocate and initialise the hash-table used to store tokenizers. */ + /* Allocate and initialize the hash-table used to store tokenizers. */ pHash = sqlite3_malloc(sizeof(fts2Hash)); if( !pHash ){ rc = SQLITE_NOMEM; }else{ sqlite3Fts2HashInit(pHash, FTS2_HASH_STRING, 1); @@ -6842,11 +6842,14 @@ } return rc; } #if !SQLITE_CORE -int sqlite3_extension_init( +#ifdef _WIN32 +__declspec(dllexport) +#endif +int sqlite3_fts2_init( sqlite3 *db, char **pzErrMsg, const sqlite3_api_routines *pApi ){ SQLITE_EXTENSION_INIT2(pApi) Index: ext/fts2/fts2_hash.c ================================================================== --- ext/fts2/fts2_hash.c +++ ext/fts2/fts2_hash.c @@ -28,10 +28,12 @@ #include #include #include #include "sqlite3.h" +#include "sqlite3ext.h" +SQLITE_EXTENSION_INIT3 #include "fts2_hash.h" /* ** Malloc and Free functions */ Index: ext/fts2/fts2_hash.h ================================================================== --- ext/fts2/fts2_hash.h +++ ext/fts2/fts2_hash.h @@ -7,11 +7,11 @@ ** May you do good and not evil. ** May you find forgiveness for yourself and forgive others. ** May you share freely, never taking more than you give. ** ************************************************************************* -** This is the header file for the generic hash-table implemenation +** This is the header file for the generic hash-table implementation ** used in SQLite. We've modified it slightly to serve as a standalone ** hash table implementation for the full-text indexing module. ** */ #ifndef _FTS2_HASH_H_ Index: ext/fts2/fts2_icu.c ================================================================== --- ext/fts2/fts2_icu.c +++ ext/fts2/fts2_icu.c @@ -116,19 +116,19 @@ nInput = strlen(zInput); } nChar = nInput+1; pCsr = (IcuCursor *)sqlite3_malloc( sizeof(IcuCursor) + /* IcuCursor */ - nChar * sizeof(UChar) + /* IcuCursor.aChar[] */ + ((nChar+3)&~3) * sizeof(UChar) + /* IcuCursor.aChar[] */ (nChar+1) * sizeof(int) /* IcuCursor.aOffset[] */ ); if( !pCsr ){ return SQLITE_NOMEM; } memset(pCsr, 0, sizeof(IcuCursor)); pCsr->aChar = (UChar *)&pCsr[1]; - pCsr->aOffset = (int *)&pCsr->aChar[nChar]; + pCsr->aOffset = (int *)&pCsr->aChar[(nChar+3)&~3]; pCsr->aOffset[iOut] = iInput; U8_NEXT(zInput, iInput, nInput, c); while( c>0 ){ int isError = 0; Index: ext/fts2/fts2_porter.c ================================================================== --- ext/fts2/fts2_porter.c +++ ext/fts2/fts2_porter.c @@ -28,10 +28,13 @@ #include #include #include #include +#include "sqlite3.h" +#include "sqlite3ext.h" +SQLITE_EXTENSION_INIT3 #include "fts2_tokenizer.h" /* ** Class derived from sqlite3_tokenizer */ Index: ext/fts2/fts2_tokenizer.c ================================================================== --- ext/fts2/fts2_tokenizer.c +++ ext/fts2/fts2_tokenizer.c @@ -26,11 +26,11 @@ #if !defined(SQLITE_CORE) || defined(SQLITE_ENABLE_FTS2) #include "sqlite3.h" #include "sqlite3ext.h" -SQLITE_EXTENSION_INIT1 +SQLITE_EXTENSION_INIT3 #include "fts2_hash.h" #include "fts2_tokenizer.h" #include @@ -317,11 +317,11 @@ #endif /* ** Set up SQL objects in database db used to access the contents of ** the hash table pointed to by argument pHash. The hash table must -** been initialised to use string keys, and to take a private copy +** been initialized to use string keys, and to take a private copy ** of the key when a value is inserted. i.e. by a call similar to: ** ** sqlite3Fts2HashInit(pHash, FTS2_HASH_STRING, 1); ** ** This function adds a scalar function (see header comment above Index: ext/fts2/fts2_tokenizer.h ================================================================== --- ext/fts2/fts2_tokenizer.h +++ ext/fts2/fts2_tokenizer.h @@ -68,11 +68,11 @@ ** to the strings "arg1" and "arg2". ** ** This method should return either SQLITE_OK (0), or an SQLite error ** code. If SQLITE_OK is returned, then *ppTokenizer should be set ** to point at the newly created tokenizer structure. The generic - ** sqlite3_tokenizer.pModule variable should not be initialised by + ** sqlite3_tokenizer.pModule variable should not be initialized by ** this callback. The caller will do so. */ int (*xCreate)( int argc, /* Size of argv array */ const char *const*argv, /* Tokenizer argument strings */ Index: ext/fts2/fts2_tokenizer1.c ================================================================== --- ext/fts2/fts2_tokenizer1.c +++ ext/fts2/fts2_tokenizer1.c @@ -28,10 +28,13 @@ #include #include #include #include +#include "sqlite3.h" +#include "sqlite3ext.h" +SQLITE_EXTENSION_INIT3 #include "fts2_tokenizer.h" typedef struct simple_tokenizer { sqlite3_tokenizer base; char delim[128]; /* flag ASCII delimiters */ Index: ext/fts3/fts3.c ================================================================== --- ext/fts3/fts3.c +++ ext/fts3/fts3.c @@ -328,36 +328,63 @@ q[-1] &= 0x7f; /* turn off high bit in final byte */ assert( q - (unsigned char *)p <= FTS3_VARINT_MAX ); return (int) (q - (unsigned char *)p); } +#define GETVARINT_STEP(v, ptr, shift, mask1, mask2, var, ret) \ + v = (v & mask1) | ( (*ptr++) << shift ); \ + if( (v & mask2)==0 ){ var = v; return ret; } +#define GETVARINT_INIT(v, ptr, shift, mask1, mask2, var, ret) \ + v = (*ptr++); \ + if( (v & mask2)==0 ){ var = v; return ret; } + /* ** Read a 64-bit variable-length integer from memory starting at p[0]. ** Return the number of bytes read, or 0 on error. ** The value is stored in *v. */ int sqlite3Fts3GetVarint(const char *p, sqlite_int64 *v){ - const unsigned char *q = (const unsigned char *) p; - sqlite_uint64 x = 0, y = 1; - while( (*q&0x80)==0x80 && q-(unsigned char *)p PREFIX */ { "compress", 8 }, /* 2 -> COMPRESS */ { "uncompress", 10 }, /* 3 -> UNCOMPRESS */ { "order", 5 }, /* 4 -> ORDER */ { "content", 7 }, /* 5 -> CONTENT */ - { "languageid", 10 } /* 6 -> LANGUAGEID */ + { "languageid", 10 }, /* 6 -> LANGUAGEID */ + { "notindexed", 10 } /* 7 -> NOTINDEXED */ }; int iOpt; if( !zVal ){ rc = SQLITE_NOMEM; @@ -1195,10 +1235,15 @@ assert( iOpt==6 ); sqlite3_free(zLanguageid); zLanguageid = zVal; zVal = 0; break; + + case 7: /* NOTINDEXED */ + azNotindexed[nNotindexed++] = zVal; + zVal = 0; + break; } } sqlite3_free(zVal); } } @@ -1266,10 +1311,11 @@ /* Allocate and populate the Fts3Table structure. */ nByte = sizeof(Fts3Table) + /* Fts3Table */ nCol * sizeof(char *) + /* azColumn */ nIndex * sizeof(struct Fts3Index) + /* aIndex */ + nCol * sizeof(u8) + /* abNotindexed */ nName + /* zName */ nDb + /* zDb */ nString; /* Space for azColumn strings */ p = (Fts3Table*)sqlite3_malloc(nByte); if( p==0 ){ @@ -1299,13 +1345,14 @@ memcpy(p->aIndex, aIndex, sizeof(struct Fts3Index) * nIndex); p->nIndex = nIndex; for(i=0; iaIndex[i].hPending, FTS3_HASH_STRING, 1); } + p->abNotindexed = (u8 *)&p->aIndex[nIndex]; /* Fill in the zName and zDb fields of the vtab structure. */ - zCsr = (char *)&p->aIndex[nIndex]; + zCsr = (char *)&p->abNotindexed[nCol]; p->zName = zCsr; memcpy(zCsr, argv[2], nName); zCsr += nName; p->zDb = zCsr; memcpy(zCsr, argv[1], nDb); @@ -1322,11 +1369,30 @@ p->azColumn[iCol] = zCsr; zCsr += n+1; assert( zCsr <= &((char *)p)[nByte] ); } - if( (zCompress==0)!=(zUncompress==0) ){ + /* Fill in the abNotindexed array */ + for(iCol=0; iColazColumn[iCol]); + for(i=0; iazColumn[iCol], zNot, n) ){ + p->abNotindexed[iCol] = 1; + sqlite3_free(zNot); + azNotindexed[i] = 0; + } + } + } + for(i=0; izReadExprlist = fts3ReadExprList(p, zUncompress, &rc); @@ -1342,14 +1408,11 @@ /* Check to see if a legacy fts3 table has been "upgraded" by the ** addition of a %_stat table so that it can use incremental merge. */ if( !isFts4 && !isCreate ){ - int rc2 = SQLITE_OK; - fts3DbExec(&rc2, db, "SELECT 1 FROM %Q.'%q_stat' WHERE id=2", - p->zDb, p->zName); - if( rc2==SQLITE_OK ) p->bHasStat = 1; + p->bHasStat = 2; } /* Figure out the page-size for the database. This is required in order to ** estimate the cost of loading large doclists from the database. */ fts3DatabasePageSize(&rc, p); @@ -1363,11 +1426,13 @@ sqlite3_free(aIndex); sqlite3_free(zCompress); sqlite3_free(zUncompress); sqlite3_free(zContent); sqlite3_free(zLanguageid); + for(i=0; ipModule->xDestroy(pTokenizer); @@ -1401,10 +1466,23 @@ sqlite3_vtab **ppVtab, /* OUT: New sqlite3_vtab object */ char **pzErr /* OUT: sqlite3_malloc'd error message */ ){ return fts3InitVtab(1, db, pAux, argc, argv, ppVtab, pzErr); } + +/* +** Set the pIdxInfo->estimatedRows variable to nRow. Unless this +** extension is currently being used by a version of SQLite too old to +** support estimatedRows. In that case this function is a no-op. +*/ +static void fts3SetEstimatedRows(sqlite3_index_info *pIdxInfo, i64 nRow){ +#if SQLITE_VERSION_NUMBER>=3008002 + if( sqlite3_libversion_number()>=3008002 ){ + pIdxInfo->estimatedRows = nRow; + } +#endif +} /* ** Implementation of the xBestIndex method for FTS3 tables. There ** are three possible strategies, in order of preference: ** @@ -1414,27 +1492,44 @@ */ static int fts3BestIndexMethod(sqlite3_vtab *pVTab, sqlite3_index_info *pInfo){ Fts3Table *p = (Fts3Table *)pVTab; int i; /* Iterator variable */ int iCons = -1; /* Index of constraint to use */ + int iLangidCons = -1; /* Index of langid=x constraint, if present */ + int iDocidGe = -1; /* Index of docid>=x constraint, if present */ + int iDocidLe = -1; /* Index of docid<=x constraint, if present */ + int iIdx; /* By default use a full table scan. This is an expensive option, ** so search through the constraints to see if a more efficient ** strategy is possible. */ pInfo->idxNum = FTS3_FULLSCAN_SEARCH; - pInfo->estimatedCost = 500000; + pInfo->estimatedCost = 5000000; for(i=0; inConstraint; i++){ + int bDocid; /* True if this constraint is on docid */ struct sqlite3_index_constraint *pCons = &pInfo->aConstraint[i]; - if( pCons->usable==0 ) continue; + if( pCons->usable==0 ){ + if( pCons->op==SQLITE_INDEX_CONSTRAINT_MATCH ){ + /* There exists an unusable MATCH constraint. This means that if + ** the planner does elect to use the results of this call as part + ** of the overall query plan the user will see an "unable to use + ** function MATCH in the requested context" error. To discourage + ** this, return a very high cost here. */ + pInfo->idxNum = FTS3_FULLSCAN_SEARCH; + pInfo->estimatedCost = 1e50; + fts3SetEstimatedRows(pInfo, ((sqlite3_int64)1) << 50); + return SQLITE_OK; + } + continue; + } + + bDocid = (pCons->iColumn<0 || pCons->iColumn==p->nColumn+1); /* A direct lookup on the rowid or docid column. Assign a cost of 1.0. */ - if( iCons<0 - && pCons->op==SQLITE_INDEX_CONSTRAINT_EQ - && (pCons->iColumn<0 || pCons->iColumn==p->nColumn+1 ) - ){ + if( iCons<0 && pCons->op==SQLITE_INDEX_CONSTRAINT_EQ && bDocid ){ pInfo->idxNum = FTS3_DOCID_SEARCH; pInfo->estimatedCost = 1.0; iCons = i; } @@ -1459,18 +1554,42 @@ if( pCons->op==SQLITE_INDEX_CONSTRAINT_EQ && pCons->iColumn==p->nColumn + 2 ){ iLangidCons = i; } + + if( bDocid ){ + switch( pCons->op ){ + case SQLITE_INDEX_CONSTRAINT_GE: + case SQLITE_INDEX_CONSTRAINT_GT: + iDocidGe = i; + break; + + case SQLITE_INDEX_CONSTRAINT_LE: + case SQLITE_INDEX_CONSTRAINT_LT: + iDocidLe = i; + break; + } + } } + iIdx = 1; if( iCons>=0 ){ - pInfo->aConstraintUsage[iCons].argvIndex = 1; + pInfo->aConstraintUsage[iCons].argvIndex = iIdx++; pInfo->aConstraintUsage[iCons].omit = 1; } if( iLangidCons>=0 ){ - pInfo->aConstraintUsage[iLangidCons].argvIndex = 2; + pInfo->idxNum |= FTS3_HAVE_LANGID; + pInfo->aConstraintUsage[iLangidCons].argvIndex = iIdx++; + } + if( iDocidGe>=0 ){ + pInfo->idxNum |= FTS3_HAVE_DOCID_GE; + pInfo->aConstraintUsage[iDocidGe].argvIndex = iIdx++; + } + if( iDocidLe>=0 ){ + pInfo->idxNum |= FTS3_HAVE_DOCID_LE; + pInfo->aConstraintUsage[iDocidLe].argvIndex = iIdx++; } /* Regardless of the strategy selected, FTS can deliver rows in rowid (or ** docid) order. Both ascending and descending are possible. */ @@ -1569,11 +1688,11 @@ if( SQLITE_ROW==sqlite3_step(pCsr->pStmt) ){ return SQLITE_OK; }else{ rc = sqlite3_reset(pCsr->pStmt); if( rc==SQLITE_OK && ((Fts3Table *)pCsr->base.pVtab)->zContentTbl==0 ){ - /* If no row was found and no error has occured, then the %_content + /* If no row was found and no error has occurred, then the %_content ** table is missing a row that is present in the full-text index. ** The data structures are corrupt. */ rc = FTS_CORRUPT_VTAB; pCsr->isEof = 1; } @@ -1644,14 +1763,14 @@ int nBuffer; /* Total term size */ /* Load the next term on the node into zBuffer. Use realloc() to expand ** the size of zBuffer if required. */ if( !isFirstTerm ){ - zCsr += sqlite3Fts3GetVarint32(zCsr, &nPrefix); + zCsr += fts3GetVarint32(zCsr, &nPrefix); } isFirstTerm = 0; - zCsr += sqlite3Fts3GetVarint32(zCsr, &nSuffix); + zCsr += fts3GetVarint32(zCsr, &nSuffix); if( nPrefix<0 || nSuffix<0 || &zCsr[nSuffix]>zEnd ){ rc = FTS_CORRUPT_VTAB; goto finish_scan; } @@ -1735,11 +1854,11 @@ int rc; /* Return code */ int iHeight; /* Height of this node in tree */ assert( piLeaf || piLeaf2 ); - sqlite3Fts3GetVarint32(zNode, &iHeight); + fts3GetVarint32(zNode, &iHeight); rc = fts3ScanInteriorNode(zTerm, nTerm, zNode, nNode, piLeaf, piLeaf2); assert( !piLeaf2 || !piLeaf || rc!=SQLITE_OK || (*piLeaf<=*piLeaf2) ); if( rc==SQLITE_OK && iHeight>1 ){ char *zBlob = 0; /* Blob read from %_segments table */ @@ -1937,15 +2056,15 @@ while( *p1 || *p2 ){ int iCol1; /* The current column index in pp1 */ int iCol2; /* The current column index in pp2 */ - if( *p1==POS_COLUMN ) sqlite3Fts3GetVarint32(&p1[1], &iCol1); + if( *p1==POS_COLUMN ) fts3GetVarint32(&p1[1], &iCol1); else if( *p1==POS_END ) iCol1 = POSITION_LIST_END; else iCol1 = 0; - if( *p2==POS_COLUMN ) sqlite3Fts3GetVarint32(&p2[1], &iCol2); + if( *p2==POS_COLUMN ) fts3GetVarint32(&p2[1], &iCol2); else if( *p2==POS_END ) iCol2 = POSITION_LIST_END; else iCol2 = 0; if( iCol1==iCol2 ){ sqlite3_int64 i1 = 0; /* Last position from pp1 */ @@ -2034,15 +2153,15 @@ assert( isSaveLeft==0 || isExact==0 ); assert( p!=0 && *p1!=0 && *p2!=0 ); if( *p1==POS_COLUMN ){ p1++; - p1 += sqlite3Fts3GetVarint32(p1, &iCol1); + p1 += fts3GetVarint32(p1, &iCol1); } if( *p2==POS_COLUMN ){ p2++; - p2 += sqlite3Fts3GetVarint32(p2, &iCol2); + p2 += fts3GetVarint32(p2, &iCol2); } while( 1 ){ if( iCol1==iCol2 ){ char *pSave = p; @@ -2088,13 +2207,13 @@ fts3ColumnlistCopy(0, &p2); assert( (*p1&0xFE)==0 && (*p2&0xFE)==0 ); if( 0==*p1 || 0==*p2 ) break; p1++; - p1 += sqlite3Fts3GetVarint32(p1, &iCol1); + p1 += fts3GetVarint32(p1, &iCol1); p2++; - p2 += sqlite3Fts3GetVarint32(p2, &iCol2); + p2 += fts3GetVarint32(p2, &iCol2); } /* Advance pointer p1 or p2 (whichever corresponds to the smaller of ** iCol1 and iCol2) so that it points to either the 0x00 that marks the ** end of the position list, or the 0x01 that precedes the next @@ -2102,16 +2221,16 @@ */ else if( iCol1base.pVtab)->pSegments==0 ); return rc; } + +/* +** The following are copied from sqliteInt.h. +** +** Constants for the largest and smallest possible 64-bit signed integers. +** These macros are designed to work correctly on both 32-bit and 64-bit +** compilers. +*/ +#ifndef SQLITE_AMALGAMATION +# define LARGEST_INT64 (0xffffffff|(((sqlite3_int64)0x7fffffff)<<32)) +# define SMALLEST_INT64 (((sqlite3_int64)-1) - LARGEST_INT64) +#endif + +/* +** If the numeric type of argument pVal is "integer", then return it +** converted to a 64-bit signed integer. Otherwise, return a copy of +** the second parameter, iDefault. +*/ +static sqlite3_int64 fts3DocidRange(sqlite3_value *pVal, i64 iDefault){ + if( pVal ){ + int eType = sqlite3_value_numeric_type(pVal); + if( eType==SQLITE_INTEGER ){ + return sqlite3_value_int64(pVal); + } + } + return iDefault; +} /* ** This is the xFilter interface for the virtual table. See ** the virtual table xFilter method documentation for additional ** information. @@ -2938,61 +3084,73 @@ int nVal, /* Number of elements in apVal */ sqlite3_value **apVal /* Arguments for the indexing scheme */ ){ int rc; char *zSql; /* SQL statement used to access %_content */ + int eSearch; Fts3Table *p = (Fts3Table *)pCursor->pVtab; Fts3Cursor *pCsr = (Fts3Cursor *)pCursor; + + sqlite3_value *pCons = 0; /* The MATCH or rowid constraint, if any */ + sqlite3_value *pLangid = 0; /* The "langid = ?" constraint, if any */ + sqlite3_value *pDocidGe = 0; /* The "docid >= ?" constraint, if any */ + sqlite3_value *pDocidLe = 0; /* The "docid <= ?" constraint, if any */ + int iIdx; UNUSED_PARAMETER(idxStr); UNUSED_PARAMETER(nVal); - assert( idxNum>=0 && idxNum<=(FTS3_FULLTEXT_SEARCH+p->nColumn) ); - assert( nVal==0 || nVal==1 || nVal==2 ); - assert( (nVal==0)==(idxNum==FTS3_FULLSCAN_SEARCH) ); + eSearch = (idxNum & 0x0000FFFF); + assert( eSearch>=0 && eSearch<=(FTS3_FULLTEXT_SEARCH+p->nColumn) ); assert( p->pSegments==0 ); + + /* Collect arguments into local variables */ + iIdx = 0; + if( eSearch!=FTS3_FULLSCAN_SEARCH ) pCons = apVal[iIdx++]; + if( idxNum & FTS3_HAVE_LANGID ) pLangid = apVal[iIdx++]; + if( idxNum & FTS3_HAVE_DOCID_GE ) pDocidGe = apVal[iIdx++]; + if( idxNum & FTS3_HAVE_DOCID_LE ) pDocidLe = apVal[iIdx++]; + assert( iIdx==nVal ); /* In case the cursor has been used before, clear it now. */ sqlite3_finalize(pCsr->pStmt); sqlite3_free(pCsr->aDoclist); sqlite3Fts3ExprFree(pCsr->pExpr); memset(&pCursor[1], 0, sizeof(Fts3Cursor)-sizeof(sqlite3_vtab_cursor)); + /* Set the lower and upper bounds on docids to return */ + pCsr->iMinDocid = fts3DocidRange(pDocidGe, SMALLEST_INT64); + pCsr->iMaxDocid = fts3DocidRange(pDocidLe, LARGEST_INT64); + if( idxStr ){ pCsr->bDesc = (idxStr[0]=='D'); }else{ pCsr->bDesc = p->bDescIdx; } - pCsr->eSearch = (i16)idxNum; + pCsr->eSearch = (i16)eSearch; - if( idxNum!=FTS3_DOCID_SEARCH && idxNum!=FTS3_FULLSCAN_SEARCH ){ - int iCol = idxNum-FTS3_FULLTEXT_SEARCH; - const char *zQuery = (const char *)sqlite3_value_text(apVal[0]); + if( eSearch!=FTS3_DOCID_SEARCH && eSearch!=FTS3_FULLSCAN_SEARCH ){ + int iCol = eSearch-FTS3_FULLTEXT_SEARCH; + const char *zQuery = (const char *)sqlite3_value_text(pCons); - if( zQuery==0 && sqlite3_value_type(apVal[0])!=SQLITE_NULL ){ + if( zQuery==0 && sqlite3_value_type(pCons)!=SQLITE_NULL ){ return SQLITE_NOMEM; } pCsr->iLangid = 0; - if( nVal==2 ) pCsr->iLangid = sqlite3_value_int(apVal[1]); + if( pLangid ) pCsr->iLangid = sqlite3_value_int(pLangid); + assert( p->base.zErrMsg==0 ); rc = sqlite3Fts3ExprParse(p->pTokenizer, pCsr->iLangid, - p->azColumn, p->bFts4, p->nColumn, iCol, zQuery, -1, &pCsr->pExpr + p->azColumn, p->bFts4, p->nColumn, iCol, zQuery, -1, &pCsr->pExpr, + &p->base.zErrMsg ); if( rc!=SQLITE_OK ){ - if( rc==SQLITE_ERROR ){ - static const char *zErr = "malformed MATCH expression: [%s]"; - p->base.zErrMsg = sqlite3_mprintf(zErr, zQuery); - } return rc; } - rc = sqlite3Fts3ReadLock(p); - if( rc!=SQLITE_OK ) return rc; - rc = fts3EvalStart(pCsr); - sqlite3Fts3SegmentsClose(p); if( rc!=SQLITE_OK ) return rc; pCsr->pNextId = pCsr->aDoclist; pCsr->iPrevId = 0; } @@ -3000,11 +3158,11 @@ /* Compile a SELECT statement for this cursor. For a full-table-scan, the ** statement loops through all rows of the %_content table. For a ** full-text query or docid lookup, the statement retrieves a single ** row by docid. */ - if( idxNum==FTS3_FULLSCAN_SEARCH ){ + if( eSearch==FTS3_FULLSCAN_SEARCH ){ zSql = sqlite3_mprintf( "SELECT %s ORDER BY rowid %s", p->zReadExprlist, (pCsr->bDesc ? "DESC" : "ASC") ); if( zSql ){ @@ -3011,14 +3169,14 @@ rc = sqlite3_prepare_v2(p->db, zSql, -1, &pCsr->pStmt, 0); sqlite3_free(zSql); }else{ rc = SQLITE_NOMEM; } - }else if( idxNum==FTS3_DOCID_SEARCH ){ + }else if( eSearch==FTS3_DOCID_SEARCH ){ rc = fts3CursorSeekStmt(pCsr, &pCsr->pStmt); if( rc==SQLITE_OK ){ - rc = sqlite3_bind_value(pCsr->pStmt, 1, apVal[0]); + rc = sqlite3_bind_value(pCsr->pStmt, 1, pCons); } } if( rc!=SQLITE_OK ) return rc; return fts3NextMethod(pCursor); @@ -3157,11 +3315,38 @@ sqlite3Fts3SegmentsClose(p); return rc; } /* -** Implementation of xBegin() method. This is a no-op. +** If it is currently unknown whether or not the FTS table has an %_stat +** table (if p->bHasStat==2), attempt to determine this (set p->bHasStat +** to 0 or 1). Return SQLITE_OK if successful, or an SQLite error code +** if an error occurs. +*/ +static int fts3SetHasStat(Fts3Table *p){ + int rc = SQLITE_OK; + if( p->bHasStat==2 ){ + const char *zFmt ="SELECT 1 FROM %Q.sqlite_master WHERE tbl_name='%q_stat'"; + char *zSql = sqlite3_mprintf(zFmt, p->zDb, p->zName); + if( zSql ){ + sqlite3_stmt *pStmt = 0; + rc = sqlite3_prepare_v2(p->db, zSql, -1, &pStmt, 0); + if( rc==SQLITE_OK ){ + int bHasStat = (sqlite3_step(pStmt)==SQLITE_ROW); + rc = sqlite3_finalize(pStmt); + if( rc==SQLITE_OK ) p->bHasStat = bHasStat; + } + sqlite3_free(zSql); + }else{ + rc = SQLITE_NOMEM; + } + } + return rc; +} + +/* +** Implementation of xBegin() method. */ static int fts3BeginMethod(sqlite3_vtab *pVtab){ Fts3Table *p = (Fts3Table*)pVtab; UNUSED_PARAMETER(pVtab); assert( p->pSegments==0 ); @@ -3168,11 +3353,11 @@ assert( p->nPendingData==0 ); assert( p->inTransaction!=1 ); TESTONLY( p->inTransaction = 1 ); TESTONLY( p->mxSavepoint = -1; ); p->nLeafAdd = 0; - return SQLITE_OK; + return fts3SetHasStat(p); } /* ** Implementation of xCommit() method. This is a no-op. The contents of ** the pending-terms hash-table have already been flushed into the database @@ -3417,18 +3602,24 @@ ){ Fts3Table *p = (Fts3Table *)pVtab; sqlite3 *db = p->db; /* Database connection */ int rc; /* Return Code */ + /* At this point it must be known if the %_stat table exists or not. + ** So bHasStat may not be 2. */ + rc = fts3SetHasStat(p); + /* As it happens, the pending terms table is always empty here. This is ** because an "ALTER TABLE RENAME TABLE" statement inside a transaction ** always opens a savepoint transaction. And the xSavepoint() method ** flushes the pending terms table. But leave the (no-op) call to ** PendingTermsFlush() in in case that changes. */ assert( p->nPendingData==0 ); - rc = sqlite3Fts3PendingTermsFlush(p); + if( rc==SQLITE_OK ){ + rc = sqlite3Fts3PendingTermsFlush(p); + } if( p->zContentTbl==0 ){ fts3DbExec(&rc, db, "ALTER TABLE %Q.'%q_content' RENAME TO '%q_content';", p->zDb, p->zName, zName @@ -3560,11 +3751,11 @@ #ifdef SQLITE_ENABLE_ICU void sqlite3Fts3IcuTokenizerModule(sqlite3_tokenizer_module const**ppModule); #endif /* -** Initialise the fts3 extension. If this extension is built as part +** Initialize the fts3 extension. If this extension is built as part ** of the sqlite library, then this function is called directly by ** SQLite. If fts3 is built as a dynamically loadable extension, this ** function is called by the sqlite3_extension_init() entry point. */ int sqlite3Fts3Init(sqlite3 *db){ @@ -3594,11 +3785,11 @@ if( rc!=SQLITE_OK ) return rc; sqlite3Fts3SimpleTokenizerModule(&pSimple); sqlite3Fts3PorterTokenizerModule(&pPorter); - /* Allocate and initialise the hash-table used to store tokenizers. */ + /* Allocate and initialize the hash-table used to store tokenizers. */ pHash = sqlite3_malloc(sizeof(Fts3Hash)); if( !pHash ){ rc = SQLITE_NOMEM; }else{ sqlite3Fts3HashInit(pHash, FTS3_HASH_STRING, 1); @@ -3644,12 +3835,16 @@ if( rc==SQLITE_OK ){ rc = sqlite3_create_module_v2( db, "fts4", &fts3Module, (void *)pHash, 0 ); } + if( rc==SQLITE_OK ){ + rc = sqlite3Fts3InitTok(db, (void *)pHash); + } return rc; } + /* An error has occurred. Delete the hash table and return the error code. */ assert( rc!=SQLITE_OK ); if( pHash ){ sqlite3Fts3HashClear(pHash); @@ -3901,10 +4096,16 @@ } return SQLITE_OK; } +/* +** Maximum number of tokens a phrase may have to be considered for the +** incremental doclists strategy. +*/ +#define MAX_INCR_PHRASE_TOKENS 4 + /* ** This function is called for each Fts3Phrase in a full-text query ** expression to initialize the mechanism for returning rows. Once this ** function has been called successfully on an Fts3Phrase, it may be ** used with fts3EvalPhraseNext() to iterate through the matching docids. @@ -3914,27 +4115,47 @@ ** memory within this call. ** ** SQLITE_OK is returned if no error occurs, otherwise an SQLite error code. */ static int fts3EvalPhraseStart(Fts3Cursor *pCsr, int bOptOk, Fts3Phrase *p){ - int rc; /* Error code */ - Fts3PhraseToken *pFirst = &p->aToken[0]; Fts3Table *pTab = (Fts3Table *)pCsr->base.pVtab; + int rc = SQLITE_OK; /* Error code */ + int i; - if( pCsr->bDesc==pTab->bDescIdx - && bOptOk==1 - && p->nToken==1 - && pFirst->pSegcsr - && pFirst->pSegcsr->bLookup - && pFirst->bFirst==0 - ){ + /* Determine if doclists may be loaded from disk incrementally. This is + ** possible if the bOptOk argument is true, the FTS doclists will be + ** scanned in forward order, and the phrase consists of + ** MAX_INCR_PHRASE_TOKENS or fewer tokens, none of which are are "^first" + ** tokens or prefix tokens that cannot use a prefix-index. */ + int bHaveIncr = 0; + int bIncrOk = (bOptOk + && pCsr->bDesc==pTab->bDescIdx + && p->nToken<=MAX_INCR_PHRASE_TOKENS && p->nToken>0 + && p->nToken<=MAX_INCR_PHRASE_TOKENS && p->nToken>0 +#ifdef SQLITE_TEST + && pTab->bNoIncrDoclist==0 +#endif + ); + for(i=0; bIncrOk==1 && inToken; i++){ + Fts3PhraseToken *pToken = &p->aToken[i]; + if( pToken->bFirst || (pToken->pSegcsr!=0 && !pToken->pSegcsr->bLookup) ){ + bIncrOk = 0; + } + if( pToken->pSegcsr ) bHaveIncr = 1; + } + + if( bIncrOk && bHaveIncr ){ /* Use the incremental approach. */ int iCol = (p->iColumn >= pTab->nColumn ? -1 : p->iColumn); - rc = sqlite3Fts3MsrIncrStart( - pTab, pFirst->pSegcsr, iCol, pFirst->z, pFirst->n); + for(i=0; rc==SQLITE_OK && inToken; i++){ + Fts3PhraseToken *pToken = &p->aToken[i]; + Fts3MultiSegReader *pSegcsr = pToken->pSegcsr; + if( pSegcsr ){ + rc = sqlite3Fts3MsrIncrStart(pTab, pSegcsr, iCol, pToken->z, pToken->n); + } + } p->bIncr = 1; - }else{ /* Load the full doclist for the phrase into memory. */ rc = fts3EvalPhraseLoad(pCsr, p); p->bIncr = 0; } @@ -4038,10 +4259,220 @@ } } *ppIter = p; } + +/* +** Advance the iterator pDL to the next entry in pDL->aAll/nAll. Set *pbEof +** to true if EOF is reached. +*/ +static void fts3EvalDlPhraseNext( + Fts3Table *pTab, + Fts3Doclist *pDL, + u8 *pbEof +){ + char *pIter; /* Used to iterate through aAll */ + char *pEnd = &pDL->aAll[pDL->nAll]; /* 1 byte past end of aAll */ + + if( pDL->pNextDocid ){ + pIter = pDL->pNextDocid; + }else{ + pIter = pDL->aAll; + } + + if( pIter>=pEnd ){ + /* We have already reached the end of this doclist. EOF. */ + *pbEof = 1; + }else{ + sqlite3_int64 iDelta; + pIter += sqlite3Fts3GetVarint(pIter, &iDelta); + if( pTab->bDescIdx==0 || pDL->pNextDocid==0 ){ + pDL->iDocid += iDelta; + }else{ + pDL->iDocid -= iDelta; + } + pDL->pList = pIter; + fts3PoslistCopy(0, &pIter); + pDL->nList = (int)(pIter - pDL->pList); + + /* pIter now points just past the 0x00 that terminates the position- + ** list for document pDL->iDocid. However, if this position-list was + ** edited in place by fts3EvalNearTrim(), then pIter may not actually + ** point to the start of the next docid value. The following line deals + ** with this case by advancing pIter past the zero-padding added by + ** fts3EvalNearTrim(). */ + while( pIterpNextDocid = pIter; + assert( pIter>=&pDL->aAll[pDL->nAll] || *pIter ); + *pbEof = 0; + } +} + +/* +** Helper type used by fts3EvalIncrPhraseNext() and incrPhraseTokenNext(). +*/ +typedef struct TokenDoclist TokenDoclist; +struct TokenDoclist { + int bIgnore; + sqlite3_int64 iDocid; + char *pList; + int nList; +}; + +/* +** Token pToken is an incrementally loaded token that is part of a +** multi-token phrase. Advance it to the next matching document in the +** database and populate output variable *p with the details of the new +** entry. Or, if the iterator has reached EOF, set *pbEof to true. +** +** If an error occurs, return an SQLite error code. Otherwise, return +** SQLITE_OK. +*/ +static int incrPhraseTokenNext( + Fts3Table *pTab, /* Virtual table handle */ + Fts3Phrase *pPhrase, /* Phrase to advance token of */ + int iToken, /* Specific token to advance */ + TokenDoclist *p, /* OUT: Docid and doclist for new entry */ + u8 *pbEof /* OUT: True if iterator is at EOF */ +){ + int rc = SQLITE_OK; + + if( pPhrase->iDoclistToken==iToken ){ + assert( p->bIgnore==0 ); + assert( pPhrase->aToken[iToken].pSegcsr==0 ); + fts3EvalDlPhraseNext(pTab, &pPhrase->doclist, pbEof); + p->pList = pPhrase->doclist.pList; + p->nList = pPhrase->doclist.nList; + p->iDocid = pPhrase->doclist.iDocid; + }else{ + Fts3PhraseToken *pToken = &pPhrase->aToken[iToken]; + assert( pToken->pDeferred==0 ); + assert( pToken->pSegcsr || pPhrase->iDoclistToken>=0 ); + if( pToken->pSegcsr ){ + assert( p->bIgnore==0 ); + rc = sqlite3Fts3MsrIncrNext( + pTab, pToken->pSegcsr, &p->iDocid, &p->pList, &p->nList + ); + if( p->pList==0 ) *pbEof = 1; + }else{ + p->bIgnore = 1; + } + } + + return rc; +} + + +/* +** The phrase iterator passed as the second argument: +** +** * features at least one token that uses an incremental doclist, and +** +** * does not contain any deferred tokens. +** +** Advance it to the next matching documnent in the database and populate +** the Fts3Doclist.pList and nList fields. +** +** If there is no "next" entry and no error occurs, then *pbEof is set to +** 1 before returning. Otherwise, if no error occurs and the iterator is +** successfully advanced, *pbEof is set to 0. +** +** If an error occurs, return an SQLite error code. Otherwise, return +** SQLITE_OK. +*/ +static int fts3EvalIncrPhraseNext( + Fts3Cursor *pCsr, /* FTS Cursor handle */ + Fts3Phrase *p, /* Phrase object to advance to next docid */ + u8 *pbEof /* OUT: Set to 1 if EOF */ +){ + int rc = SQLITE_OK; + Fts3Doclist *pDL = &p->doclist; + Fts3Table *pTab = (Fts3Table *)pCsr->base.pVtab; + u8 bEof = 0; + + /* This is only called if it is guaranteed that the phrase has at least + ** one incremental token. In which case the bIncr flag is set. */ + assert( p->bIncr==1 ); + + if( p->nToken==1 && p->bIncr ){ + rc = sqlite3Fts3MsrIncrNext(pTab, p->aToken[0].pSegcsr, + &pDL->iDocid, &pDL->pList, &pDL->nList + ); + if( pDL->pList==0 ) bEof = 1; + }else{ + int bDescDoclist = pCsr->bDesc; + struct TokenDoclist a[MAX_INCR_PHRASE_TOKENS]; + + memset(a, 0, sizeof(a)); + assert( p->nToken<=MAX_INCR_PHRASE_TOKENS ); + assert( p->iDoclistTokennToken && bEof==0; i++){ + rc = incrPhraseTokenNext(pTab, p, i, &a[i], &bEof); + if( a[i].bIgnore==0 && (bMaxSet==0 || DOCID_CMP(iMax, a[i].iDocid)<0) ){ + iMax = a[i].iDocid; + bMaxSet = 1; + } + } + assert( rc!=SQLITE_OK || a[p->nToken-1].bIgnore==0 ); + assert( rc!=SQLITE_OK || bMaxSet ); + + /* Keep advancing iterators until they all point to the same document */ + for(i=0; inToken; i++){ + while( rc==SQLITE_OK && bEof==0 + && a[i].bIgnore==0 && DOCID_CMP(a[i].iDocid, iMax)<0 + ){ + rc = incrPhraseTokenNext(pTab, p, i, &a[i], &bEof); + if( DOCID_CMP(a[i].iDocid, iMax)>0 ){ + iMax = a[i].iDocid; + i = 0; + } + } + } + + /* Check if the current entries really are a phrase match */ + if( bEof==0 ){ + int nList = 0; + int nByte = a[p->nToken-1].nList; + char *aDoclist = sqlite3_malloc(nByte+1); + if( !aDoclist ) return SQLITE_NOMEM; + memcpy(aDoclist, a[p->nToken-1].pList, nByte+1); + + for(i=0; i<(p->nToken-1); i++){ + if( a[i].bIgnore==0 ){ + char *pL = a[i].pList; + char *pR = aDoclist; + char *pOut = aDoclist; + int nDist = p->nToken-1-i; + int res = fts3PoslistPhraseMerge(&pOut, nDist, 0, 1, &pL, &pR); + if( res==0 ) break; + nList = (int)(pOut - aDoclist); + } + } + if( i==(p->nToken-1) ){ + pDL->iDocid = iMax; + pDL->pList = aDoclist; + pDL->nList = nList; + pDL->bFreeList = 1; + break; + } + sqlite3_free(aDoclist); + } + } + } + + *pbEof = bEof; + return rc; +} /* ** Attempt to move the phrase iterator to point to the next matching docid. ** If an error occurs, return an SQLite error code. Otherwise, return ** SQLITE_OK. @@ -4058,59 +4489,18 @@ int rc = SQLITE_OK; Fts3Doclist *pDL = &p->doclist; Fts3Table *pTab = (Fts3Table *)pCsr->base.pVtab; if( p->bIncr ){ - assert( p->nToken==1 ); - assert( pDL->pNextDocid==0 ); - rc = sqlite3Fts3MsrIncrNext(pTab, p->aToken[0].pSegcsr, - &pDL->iDocid, &pDL->pList, &pDL->nList - ); - if( rc==SQLITE_OK && !pDL->pList ){ - *pbEof = 1; - } + rc = fts3EvalIncrPhraseNext(pCsr, p, pbEof); }else if( pCsr->bDesc!=pTab->bDescIdx && pDL->nAll ){ sqlite3Fts3DoclistPrev(pTab->bDescIdx, pDL->aAll, pDL->nAll, &pDL->pNextDocid, &pDL->iDocid, &pDL->nList, pbEof ); pDL->pList = pDL->pNextDocid; }else{ - char *pIter; /* Used to iterate through aAll */ - char *pEnd = &pDL->aAll[pDL->nAll]; /* 1 byte past end of aAll */ - if( pDL->pNextDocid ){ - pIter = pDL->pNextDocid; - }else{ - pIter = pDL->aAll; - } - - if( pIter>=pEnd ){ - /* We have already reached the end of this doclist. EOF. */ - *pbEof = 1; - }else{ - sqlite3_int64 iDelta; - pIter += sqlite3Fts3GetVarint(pIter, &iDelta); - if( pTab->bDescIdx==0 || pDL->pNextDocid==0 ){ - pDL->iDocid += iDelta; - }else{ - pDL->iDocid -= iDelta; - } - pDL->pList = pIter; - fts3PoslistCopy(0, &pIter); - pDL->nList = (int)(pIter - pDL->pList); - - /* pIter now points just past the 0x00 that terminates the position- - ** list for document pDL->iDocid. However, if this position-list was - ** edited in place by fts3EvalNearTrim(), then pIter may not actually - ** point to the start of the next docid value. The following line deals - ** with this case by advancing pIter past the zero-padding added by - ** fts3EvalNearTrim(). */ - while( pIterpNextDocid = pIter; - assert( pIter>=&pDL->aAll[pDL->nAll] || *pIter ); - *pbEof = 0; - } + fts3EvalDlPhraseNext(pTab, pDL, pbEof); } return rc; } @@ -4131,11 +4521,10 @@ ** code before returning. */ static void fts3EvalStartReaders( Fts3Cursor *pCsr, /* FTS Cursor handle */ Fts3Expr *pExpr, /* Expression to initialize phrases in */ - int bOptOk, /* True to enable incremental loading */ int *pRc /* IN/OUT: Error code */ ){ if( pExpr && SQLITE_OK==*pRc ){ if( pExpr->eType==FTSQUERY_PHRASE ){ int i; @@ -4142,14 +4531,14 @@ int nToken = pExpr->pPhrase->nToken; for(i=0; ipPhrase->aToken[i].pDeferred==0 ) break; } pExpr->bDeferred = (i==nToken); - *pRc = fts3EvalPhraseStart(pCsr, bOptOk, pExpr->pPhrase); + *pRc = fts3EvalPhraseStart(pCsr, 1, pExpr->pPhrase); }else{ - fts3EvalStartReaders(pCsr, pExpr->pLeft, bOptOk, pRc); - fts3EvalStartReaders(pCsr, pExpr->pRight, bOptOk, pRc); + fts3EvalStartReaders(pCsr, pExpr->pLeft, pRc); + fts3EvalStartReaders(pCsr, pExpr->pRight, pRc); pExpr->bDeferred = (pExpr->pLeft->bDeferred && pExpr->pRight->bDeferred); } } } @@ -4387,11 +4776,11 @@ /* Set nLoad4 to the value of (4^nOther) for the next iteration of the ** for-loop. Except, limit the value to 2^24 to prevent it from ** overflowing the 32-bit integer it is stored in. */ if( ii<12 ) nLoad4 = nLoad4*4; - if( ii==0 || pTC->pPhrase->nToken>1 ){ + if( ii==0 || (pTC->pPhrase->nToken>1 && ii!=nToken-1) ){ /* Either this is the cheapest token in the entire query, or it is ** part of a multi-token phrase. Either way, the entire doclist will ** (eventually) be loaded into memory. It may as well be now. */ Fts3PhraseToken *pToken = pTC->pToken; int nList = 0; @@ -4467,11 +4856,11 @@ sqlite3_free(aTC); } } #endif - fts3EvalStartReaders(pCsr, pCsr->pExpr, 1, &rc); + fts3EvalStartReaders(pCsr, pCsr->pExpr, &rc); return rc; } /* ** Invalidate the current position list for phrase pPhrase. @@ -4741,39 +5130,43 @@ /* Allocate temporary working space. */ for(p=pExpr; p->pLeft; p=p->pLeft){ nTmp += p->pRight->pPhrase->doclist.nList; } nTmp += p->pPhrase->doclist.nList; - aTmp = sqlite3_malloc(nTmp*2); - if( !aTmp ){ - *pRc = SQLITE_NOMEM; + if( nTmp==0 ){ res = 0; }else{ - char *aPoslist = p->pPhrase->doclist.pList; - int nToken = p->pPhrase->nToken; - - for(p=p->pParent;res && p && p->eType==FTSQUERY_NEAR; p=p->pParent){ - Fts3Phrase *pPhrase = p->pRight->pPhrase; - int nNear = p->nNear; - res = fts3EvalNearTrim(nNear, aTmp, &aPoslist, &nToken, pPhrase); - } - - aPoslist = pExpr->pRight->pPhrase->doclist.pList; - nToken = pExpr->pRight->pPhrase->nToken; - for(p=pExpr->pLeft; p && res; p=p->pLeft){ - int nNear; - Fts3Phrase *pPhrase; - assert( p->pParent && p->pParent->pLeft==p ); - nNear = p->pParent->nNear; - pPhrase = ( - p->eType==FTSQUERY_NEAR ? p->pRight->pPhrase : p->pPhrase - ); - res = fts3EvalNearTrim(nNear, aTmp, &aPoslist, &nToken, pPhrase); + aTmp = sqlite3_malloc(nTmp*2); + if( !aTmp ){ + *pRc = SQLITE_NOMEM; + res = 0; + }else{ + char *aPoslist = p->pPhrase->doclist.pList; + int nToken = p->pPhrase->nToken; + + for(p=p->pParent;res && p && p->eType==FTSQUERY_NEAR; p=p->pParent){ + Fts3Phrase *pPhrase = p->pRight->pPhrase; + int nNear = p->nNear; + res = fts3EvalNearTrim(nNear, aTmp, &aPoslist, &nToken, pPhrase); + } + + aPoslist = pExpr->pRight->pPhrase->doclist.pList; + nToken = pExpr->pRight->pPhrase->nToken; + for(p=pExpr->pLeft; p && res; p=p->pLeft){ + int nNear; + Fts3Phrase *pPhrase; + assert( p->pParent && p->pParent->pLeft==p ); + nNear = p->pParent->nNear; + pPhrase = ( + p->eType==FTSQUERY_NEAR ? p->pRight->pPhrase : p->pPhrase + ); + res = fts3EvalNearTrim(nNear, aTmp, &aPoslist, &nToken, pPhrase); + } } + + sqlite3_free(aTmp); } - - sqlite3_free(aTmp); } return res; } @@ -4946,10 +5339,20 @@ pCsr->isRequireSeek = 1; pCsr->isMatchinfoNeeded = 1; pCsr->iPrevId = pExpr->iDocid; }while( pCsr->isEof==0 && fts3EvalTestDeferredAndNear(pCsr, &rc) ); } + + /* Check if the cursor is past the end of the docid range specified + ** by Fts3Cursor.iMinDocid/iMaxDocid. If so, set the EOF flag. */ + if( rc==SQLITE_OK && ( + (pCsr->bDesc==0 && pCsr->iPrevId>pCsr->iMaxDocid) + || (pCsr->bDesc!=0 && pCsr->iPrevIdiMinDocid) + )){ + pCsr->isEof = 1; + } + return rc; } /* ** Restart interation for expression pExpr so that the next call to @@ -4969,16 +5372,20 @@ Fts3Phrase *pPhrase = pExpr->pPhrase; if( pPhrase ){ fts3EvalInvalidatePoslist(pPhrase); if( pPhrase->bIncr ){ - assert( pPhrase->nToken==1 ); - assert( pPhrase->aToken[0].pSegcsr ); - sqlite3Fts3MsrIncrRestart(pPhrase->aToken[0].pSegcsr); + int i; + for(i=0; inToken; i++){ + Fts3PhraseToken *pToken = &pPhrase->aToken[i]; + assert( pToken->pDeferred==0 ); + if( pToken->pSegcsr ){ + sqlite3Fts3MsrIncrRestart(pToken->pSegcsr); + } + } *pRc = fts3EvalPhraseStart(pCsr, 0, pPhrase); } - pPhrase->doclist.pNextDocid = 0; pPhrase->doclist.iDocid = 0; } pExpr->iDocid = 0; @@ -5019,11 +5426,11 @@ */ pExpr->aMI[iCol*3 + 1] += iCnt; pExpr->aMI[iCol*3 + 2] += (iCnt>0); if( *p==0x00 ) break; p++; - p += sqlite3Fts3GetVarint32(p, &iCol); + p += fts3GetVarint32(p, &iCol); } } fts3EvalUpdateCounts(pExpr->pLeft); fts3EvalUpdateCounts(pExpr->pRight); @@ -5189,11 +5596,11 @@ ** The returned value is either NULL or a pointer to a buffer containing ** a position-list indicating the occurrences of the phrase in column iCol ** of the current row. ** ** More specifically, the returned buffer contains 1 varint for each -** occurence of the phrase in the column, stored using the normal (delta+2) +** occurrence of the phrase in the column, stored using the normal (delta+2) ** compression and is terminated by either an 0x01 or 0x00 byte. For example, ** if the requested column contains "a b X c d X X" and the position-list ** for 'X' is requested, the buffer returned may contain: ** ** 0x04 0x05 0x03 0x01 or 0x04 0x05 0x03 0x00 @@ -5223,19 +5630,27 @@ iDocid = pExpr->iDocid; pIter = pPhrase->doclist.pList; if( iDocid!=pCsr->iPrevId || pExpr->bEof ){ int bDescDoclist = pTab->bDescIdx; /* For DOCID_CMP macro */ + int iMul; /* +1 if csr dir matches index dir, else -1 */ int bOr = 0; u8 bEof = 0; - Fts3Expr *p; + u8 bTreeEof = 0; + Fts3Expr *p; /* Used to iterate from pExpr to root */ + Fts3Expr *pNear; /* Most senior NEAR ancestor (or pExpr) */ /* Check if this phrase descends from an OR expression node. If not, ** return NULL. Otherwise, the entry that corresponds to docid - ** pCsr->iPrevId may lie earlier in the doclist buffer. */ + ** pCsr->iPrevId may lie earlier in the doclist buffer. Or, if the + ** tree that the node is part of has been marked as EOF, but the node + ** itself is not EOF, then it may point to an earlier entry. */ + pNear = pExpr; for(p=pExpr->pParent; p; p=p->pParent){ if( p->eType==FTSQUERY_OR ) bOr = 1; + if( p->eType==FTSQUERY_NEAR ) pNear = p; + if( p->bEof ) bTreeEof = 1; } if( bOr==0 ) return SQLITE_OK; /* This is the descendent of an OR node. In this case we cannot use ** an incremental phrase. Load the entire doclist for the phrase @@ -5250,51 +5665,81 @@ } pIter = pPhrase->doclist.pList; assert( rc!=SQLITE_OK || pPhrase->bIncr==0 ); if( rc!=SQLITE_OK ) return rc; } - - if( pExpr->bEof ){ - pIter = 0; - iDocid = 0; + + iMul = ((pCsr->bDesc==bDescDoclist) ? 1 : -1); + while( bTreeEof==1 + && pNear->bEof==0 + && (DOCID_CMP(pNear->iDocid, pCsr->iPrevId) * iMul)<0 + ){ + int rc = SQLITE_OK; + fts3EvalNextRow(pCsr, pExpr, &rc); + if( rc!=SQLITE_OK ) return rc; + iDocid = pExpr->iDocid; + pIter = pPhrase->doclist.pList; } + bEof = (pPhrase->doclist.nAll==0); assert( bDescDoclist==0 || bDescDoclist==1 ); assert( pCsr->bDesc==0 || pCsr->bDesc==1 ); - if( pCsr->bDesc==bDescDoclist ){ - int dummy; - while( (pIter==0 || DOCID_CMP(iDocid, pCsr->iPrevId)>0 ) && bEof==0 ){ - sqlite3Fts3DoclistPrev( - bDescDoclist, pPhrase->doclist.aAll, pPhrase->doclist.nAll, - &pIter, &iDocid, &dummy, &bEof - ); - } - }else{ - while( (pIter==0 || DOCID_CMP(iDocid, pCsr->iPrevId)<0 ) && bEof==0 ){ - sqlite3Fts3DoclistNext( - bDescDoclist, pPhrase->doclist.aAll, pPhrase->doclist.nAll, - &pIter, &iDocid, &bEof - ); + if( bEof==0 ){ + if( pCsr->bDesc==bDescDoclist ){ + int dummy; + if( pNear->bEof ){ + /* This expression is already at EOF. So position it to point to the + ** last entry in the doclist at pPhrase->doclist.aAll[]. Variable + ** iDocid is already set for this entry, so all that is required is + ** to set pIter to point to the first byte of the last position-list + ** in the doclist. + ** + ** It would also be correct to set pIter and iDocid to zero. In + ** this case, the first call to sqltie3Fts4DoclistPrev() below + ** would also move the iterator to point to the last entry in the + ** doclist. However, this is expensive, as to do so it has to + ** iterate through the entire doclist from start to finish (since + ** it does not know the docid for the last entry). */ + pIter = &pPhrase->doclist.aAll[pPhrase->doclist.nAll-1]; + fts3ReversePoslist(pPhrase->doclist.aAll, &pIter); + } + while( (pIter==0 || DOCID_CMP(iDocid, pCsr->iPrevId)>0 ) && bEof==0 ){ + sqlite3Fts3DoclistPrev( + bDescDoclist, pPhrase->doclist.aAll, pPhrase->doclist.nAll, + &pIter, &iDocid, &dummy, &bEof + ); + } + }else{ + if( pNear->bEof ){ + pIter = 0; + iDocid = 0; + } + while( (pIter==0 || DOCID_CMP(iDocid, pCsr->iPrevId)<0 ) && bEof==0 ){ + sqlite3Fts3DoclistNext( + bDescDoclist, pPhrase->doclist.aAll, pPhrase->doclist.nAll, + &pIter, &iDocid, &bEof + ); + } } } if( bEof || iDocid!=pCsr->iPrevId ) pIter = 0; } if( pIter==0 ) return SQLITE_OK; if( *pIter==0x01 ){ pIter++; - pIter += sqlite3Fts3GetVarint32(pIter, &iThis); + pIter += fts3GetVarint32(pIter, &iThis); }else{ iThis = 0; } while( iThis=? */ +#define FTS3_HAVE_DOCID_LE 0x00040000 /* docid<=? */ struct Fts3Doclist { char *aAll; /* Array containing doclist (or NULL) */ int nAll; /* Size of a[] in bytes */ char *pNextDocid; /* Pointer to next docid */ @@ -419,11 +448,10 @@ sqlite3_int64, sqlite3_int64, const char *, int, Fts3SegReader**); int sqlite3Fts3SegReaderPending( Fts3Table*,int,const char*,int,int,Fts3SegReader**); void sqlite3Fts3SegReaderFree(Fts3SegReader *); int sqlite3Fts3AllSegdirs(Fts3Table*, int, int, int, sqlite3_stmt **); -int sqlite3Fts3ReadLock(Fts3Table *); int sqlite3Fts3ReadBlock(Fts3Table*, sqlite3_int64, char **, int*, int*); int sqlite3Fts3SelectDoctotal(Fts3Table *, sqlite3_stmt **); int sqlite3Fts3SelectDocsize(Fts3Table *, sqlite3_int64, sqlite3_stmt **); @@ -493,10 +521,14 @@ char *aDoclist; /* Pointer to doclist buffer */ int nDoclist; /* Size of aDoclist[] in bytes */ }; int sqlite3Fts3Incrmerge(Fts3Table*,int,int); + +#define fts3GetVarint32(p, piVal) ( \ + (*(u8*)(p)&0x80) ? sqlite3Fts3GetVarint32(p, piVal) : (*piVal=*(u8*)(p), 1) \ +) /* fts3.c */ int sqlite3Fts3PutVarint(char *, sqlite3_int64); int sqlite3Fts3GetVarint(const char *, sqlite_int64 *); int sqlite3Fts3GetVarint32(const char *, int *); @@ -522,11 +554,11 @@ ); void sqlite3Fts3Matchinfo(sqlite3_context *, Fts3Cursor *, const char *); /* fts3_expr.c */ int sqlite3Fts3ExprParse(sqlite3_tokenizer *, int, - char **, int, int, int, const char *, int, Fts3Expr ** + char **, int, int, int, const char *, int, Fts3Expr **, char ** ); void sqlite3Fts3ExprFree(Fts3Expr *); #ifdef SQLITE_TEST int sqlite3Fts3ExprInitTestInterface(sqlite3 *db); int sqlite3Fts3InitTerm(sqlite3 *db); @@ -547,14 +579,17 @@ Fts3Table *, Fts3MultiSegReader *, sqlite3_int64 *, char **, int *); int sqlite3Fts3EvalPhrasePoslist(Fts3Cursor *, Fts3Expr *, int iCol, char **); int sqlite3Fts3MsrOvfl(Fts3Cursor *, Fts3MultiSegReader *, int *); int sqlite3Fts3MsrIncrRestart(Fts3MultiSegReader *pCsr); +/* fts3_tokenize_vtab.c */ +int sqlite3Fts3InitTok(sqlite3*, Fts3Hash *); + /* fts3_unicode2.c (functions generated by parsing unicode text files) */ #ifdef SQLITE_ENABLE_FTS4_UNICODE61 int sqlite3FtsUnicodeFold(int, int); int sqlite3FtsUnicodeIsalnum(int); int sqlite3FtsUnicodeIsdiacritic(int); #endif #endif /* !SQLITE_CORE || SQLITE_ENABLE_FTS3 */ #endif /* _FTSINT_H */ Index: ext/fts3/fts3_aux.c ================================================================== --- ext/fts3/fts3_aux.c +++ ext/fts3/fts3_aux.c @@ -29,10 +29,11 @@ sqlite3_vtab_cursor base; /* Base class used by SQLite core */ Fts3MultiSegReader csr; /* Must be right after "base" */ Fts3SegFilter filter; char *zStop; int nStop; /* Byte-length of string zStop */ + int iLangid; /* Language id to query */ int isEof; /* True if cursor is at EOF */ sqlite3_int64 iRowid; /* Current rowid */ int iCol; /* Current value of 'col' column */ int nStat; /* Size of aStat[] array */ @@ -43,11 +44,12 @@ }; /* ** Schema of the terms table. */ -#define FTS3_TERMS_SCHEMA "CREATE TABLE x(term, col, documents, occurrences)" +#define FTS3_AUX_SCHEMA \ + "CREATE TABLE x(term, col, documents, occurrences, languageid HIDDEN)" /* ** This function does all the work for both the xConnect and xCreate methods. ** These tables have no persistent representation of their own, so xConnect ** and xCreate are identical operations. @@ -68,24 +70,33 @@ int rc; /* value returned by declare_vtab() */ Fts3auxTable *p; /* Virtual table object to return */ UNUSED_PARAMETER(pUnused); - /* The user should specify a single argument - the name of an fts3 table. */ - if( argc!=4 ){ - *pzErr = sqlite3_mprintf( - "wrong number of arguments to fts4aux constructor" - ); - return SQLITE_ERROR; - } + /* The user should invoke this in one of two forms: + ** + ** CREATE VIRTUAL TABLE xxx USING fts4aux(fts4-table); + ** CREATE VIRTUAL TABLE xxx USING fts4aux(fts4-table-db, fts4-table); + */ + if( argc!=4 && argc!=5 ) goto bad_args; zDb = argv[1]; nDb = (int)strlen(zDb); - zFts3 = argv[3]; + if( argc==5 ){ + if( nDb==4 && 0==sqlite3_strnicmp("temp", zDb, 4) ){ + zDb = argv[3]; + nDb = (int)strlen(zDb); + zFts3 = argv[4]; + }else{ + goto bad_args; + } + }else{ + zFts3 = argv[3]; + } nFts3 = (int)strlen(zFts3); - rc = sqlite3_declare_vtab(db, FTS3_TERMS_SCHEMA); + rc = sqlite3_declare_vtab(db, FTS3_AUX_SCHEMA); if( rc!=SQLITE_OK ) return rc; nByte = sizeof(Fts3auxTable) + sizeof(Fts3Table) + nDb + nFts3 + 2; p = (Fts3auxTable *)sqlite3_malloc(nByte); if( !p ) return SQLITE_NOMEM; @@ -101,10 +112,14 @@ memcpy((char *)p->pFts3Tab->zName, zFts3, nFts3); sqlite3Fts3Dequote((char *)p->pFts3Tab->zName); *ppVtab = (sqlite3_vtab *)p; return SQLITE_OK; + + bad_args: + *pzErr = sqlite3_mprintf("invalid arguments to fts4aux constructor"); + return SQLITE_ERROR; } /* ** This function does the work for both the xDisconnect and xDestroy methods. ** These tables have no persistent representation of their own, so xDisconnect @@ -137,10 +152,12 @@ ){ int i; int iEq = -1; int iGe = -1; int iLe = -1; + int iLangid = -1; + int iNext = 1; /* Next free argvIndex value */ UNUSED_PARAMETER(pVTab); /* This vtab delivers always results in "ORDER BY term ASC" order. */ if( pInfo->nOrderBy==1 @@ -148,40 +165,52 @@ && pInfo->aOrderBy[0].desc==0 ){ pInfo->orderByConsumed = 1; } - /* Search for equality and range constraints on the "term" column. */ + /* Search for equality and range constraints on the "term" column. + ** And equality constraints on the hidden "languageid" column. */ for(i=0; inConstraint; i++){ - if( pInfo->aConstraint[i].usable && pInfo->aConstraint[i].iColumn==0 ){ + if( pInfo->aConstraint[i].usable ){ int op = pInfo->aConstraint[i].op; - if( op==SQLITE_INDEX_CONSTRAINT_EQ ) iEq = i; - if( op==SQLITE_INDEX_CONSTRAINT_LT ) iLe = i; - if( op==SQLITE_INDEX_CONSTRAINT_LE ) iLe = i; - if( op==SQLITE_INDEX_CONSTRAINT_GT ) iGe = i; - if( op==SQLITE_INDEX_CONSTRAINT_GE ) iGe = i; + int iCol = pInfo->aConstraint[i].iColumn; + + if( iCol==0 ){ + if( op==SQLITE_INDEX_CONSTRAINT_EQ ) iEq = i; + if( op==SQLITE_INDEX_CONSTRAINT_LT ) iLe = i; + if( op==SQLITE_INDEX_CONSTRAINT_LE ) iLe = i; + if( op==SQLITE_INDEX_CONSTRAINT_GT ) iGe = i; + if( op==SQLITE_INDEX_CONSTRAINT_GE ) iGe = i; + } + if( iCol==4 ){ + if( op==SQLITE_INDEX_CONSTRAINT_EQ ) iLangid = i; + } } } if( iEq>=0 ){ pInfo->idxNum = FTS4AUX_EQ_CONSTRAINT; - pInfo->aConstraintUsage[iEq].argvIndex = 1; + pInfo->aConstraintUsage[iEq].argvIndex = iNext++; pInfo->estimatedCost = 5; }else{ pInfo->idxNum = 0; pInfo->estimatedCost = 20000; if( iGe>=0 ){ pInfo->idxNum += FTS4AUX_GE_CONSTRAINT; - pInfo->aConstraintUsage[iGe].argvIndex = 1; + pInfo->aConstraintUsage[iGe].argvIndex = iNext++; pInfo->estimatedCost /= 2; } if( iLe>=0 ){ pInfo->idxNum += FTS4AUX_LE_CONSTRAINT; - pInfo->aConstraintUsage[iLe].argvIndex = 1 + (iGe>=0); + pInfo->aConstraintUsage[iLe].argvIndex = iNext++; pInfo->estimatedCost /= 2; } } + if( iLangid>=0 ){ + pInfo->aConstraintUsage[iLangid].argvIndex = iNext++; + pInfo->estimatedCost--; + } return SQLITE_OK; } /* @@ -337,21 +366,42 @@ sqlite3_value **apVal /* Arguments for the indexing scheme */ ){ Fts3auxCursor *pCsr = (Fts3auxCursor *)pCursor; Fts3Table *pFts3 = ((Fts3auxTable *)pCursor->pVtab)->pFts3Tab; int rc; - int isScan; + int isScan = 0; + int iLangVal = 0; /* Language id to query */ + + int iEq = -1; /* Index of term=? value in apVal */ + int iGe = -1; /* Index of term>=? value in apVal */ + int iLe = -1; /* Index of term<=? value in apVal */ + int iLangid = -1; /* Index of languageid=? value in apVal */ + int iNext = 0; UNUSED_PARAMETER(nVal); UNUSED_PARAMETER(idxStr); assert( idxStr==0 ); assert( idxNum==FTS4AUX_EQ_CONSTRAINT || idxNum==0 || idxNum==FTS4AUX_LE_CONSTRAINT || idxNum==FTS4AUX_GE_CONSTRAINT || idxNum==(FTS4AUX_LE_CONSTRAINT|FTS4AUX_GE_CONSTRAINT) ); - isScan = (idxNum!=FTS4AUX_EQ_CONSTRAINT); + + if( idxNum==FTS4AUX_EQ_CONSTRAINT ){ + iEq = iNext++; + }else{ + isScan = 1; + if( idxNum & FTS4AUX_GE_CONSTRAINT ){ + iGe = iNext++; + } + if( idxNum & FTS4AUX_LE_CONSTRAINT ){ + iLe = iNext++; + } + } + if( iNextfilter.zTerm); sqlite3Fts3SegReaderFinish(&pCsr->csr); sqlite3_free((void *)pCsr->filter.zTerm); @@ -359,26 +409,39 @@ memset(&pCsr->csr, 0, ((u8*)&pCsr[1]) - (u8*)&pCsr->csr); pCsr->filter.flags = FTS3_SEGMENT_REQUIRE_POS|FTS3_SEGMENT_IGNORE_EMPTY; if( isScan ) pCsr->filter.flags |= FTS3_SEGMENT_SCAN; - if( idxNum&(FTS4AUX_EQ_CONSTRAINT|FTS4AUX_GE_CONSTRAINT) ){ + if( iEq>=0 || iGe>=0 ){ const unsigned char *zStr = sqlite3_value_text(apVal[0]); + assert( (iEq==0 && iGe==-1) || (iEq==-1 && iGe==0) ); if( zStr ){ pCsr->filter.zTerm = sqlite3_mprintf("%s", zStr); pCsr->filter.nTerm = sqlite3_value_bytes(apVal[0]); if( pCsr->filter.zTerm==0 ) return SQLITE_NOMEM; } } - if( idxNum&FTS4AUX_LE_CONSTRAINT ){ - int iIdx = (idxNum&FTS4AUX_GE_CONSTRAINT) ? 1 : 0; - pCsr->zStop = sqlite3_mprintf("%s", sqlite3_value_text(apVal[iIdx])); - pCsr->nStop = sqlite3_value_bytes(apVal[iIdx]); + + if( iLe>=0 ){ + pCsr->zStop = sqlite3_mprintf("%s", sqlite3_value_text(apVal[iLe])); + pCsr->nStop = sqlite3_value_bytes(apVal[iLe]); if( pCsr->zStop==0 ) return SQLITE_NOMEM; } + + if( iLangid>=0 ){ + iLangVal = sqlite3_value_int(apVal[iLangid]); - rc = sqlite3Fts3SegReaderCursor(pFts3, 0, 0, FTS3_SEGCURSOR_ALL, + /* If the user specified a negative value for the languageid, use zero + ** instead. This works, as the "languageid=?" constraint will also + ** be tested by the VDBE layer. The test will always be false (since + ** this module will not return a row with a negative languageid), and + ** so the overall query will return zero rows. */ + if( iLangVal<0 ) iLangVal = 0; + } + pCsr->iLangid = iLangVal; + + rc = sqlite3Fts3SegReaderCursor(pFts3, iLangVal, 0, FTS3_SEGCURSOR_ALL, pCsr->filter.zTerm, pCsr->filter.nTerm, 0, isScan, &pCsr->csr ); if( rc==SQLITE_OK ){ rc = sqlite3Fts3SegReaderStart(pFts3, &pCsr->csr, &pCsr->filter); } @@ -398,28 +461,41 @@ /* ** xColumn - Return a column value. */ static int fts3auxColumnMethod( sqlite3_vtab_cursor *pCursor, /* Cursor to retrieve value from */ - sqlite3_context *pContext, /* Context for sqlite3_result_xxx() calls */ + sqlite3_context *pCtx, /* Context for sqlite3_result_xxx() calls */ int iCol /* Index of column to read value from */ ){ Fts3auxCursor *p = (Fts3auxCursor *)pCursor; assert( p->isEof==0 ); - if( iCol==0 ){ /* Column "term" */ - sqlite3_result_text(pContext, p->csr.zTerm, p->csr.nTerm, SQLITE_TRANSIENT); - }else if( iCol==1 ){ /* Column "col" */ - if( p->iCol ){ - sqlite3_result_int(pContext, p->iCol-1); - }else{ - sqlite3_result_text(pContext, "*", -1, SQLITE_STATIC); - } - }else if( iCol==2 ){ /* Column "documents" */ - sqlite3_result_int64(pContext, p->aStat[p->iCol].nDoc); - }else{ /* Column "occurrences" */ - sqlite3_result_int64(pContext, p->aStat[p->iCol].nOcc); + switch( iCol ){ + case 0: /* term */ + sqlite3_result_text(pCtx, p->csr.zTerm, p->csr.nTerm, SQLITE_TRANSIENT); + break; + + case 1: /* col */ + if( p->iCol ){ + sqlite3_result_int(pCtx, p->iCol-1); + }else{ + sqlite3_result_text(pCtx, "*", -1, SQLITE_STATIC); + } + break; + + case 2: /* documents */ + sqlite3_result_int64(pCtx, p->aStat[p->iCol].nDoc); + break; + + case 3: /* occurrences */ + sqlite3_result_int64(pCtx, p->aStat[p->iCol].nOcc); + break; + + default: /* languageid */ + assert( iCol==4 ); + sqlite3_result_int(pCtx, p->iLangid); + break; } return SQLITE_OK; } Index: ext/fts3/fts3_expr.c ================================================================== --- ext/fts3/fts3_expr.c +++ ext/fts3/fts3_expr.c @@ -104,11 +104,11 @@ /* ** This function is equivalent to the standard isspace() function. ** ** The standard isspace() can be awkward to use safely, because although it -** is defined to accept an argument of type int, its behaviour when passed +** is defined to accept an argument of type int, its behavior when passed ** an integer that falls outside of the range of the unsigned char type ** is undefined (and sometimes, "undefined" means segfault). This wrapper ** is defined to accept an argument of type char, and always returns 0 for ** any values that fall outside of the range of the unsigned char type (i.e. ** negative values). @@ -153,10 +153,15 @@ } *ppCsr = pCsr; return rc; } +/* +** Function getNextNode(), which is called by fts3ExprParse(), may itself +** call fts3ExprParse(). So this forward declaration is required. +*/ +static int fts3ExprParse(ParseContext *, const char *, int, Fts3Expr **, int *); /* ** Extract the next token from buffer z (length n) using the tokenizer ** and other information (column names etc.) in pParse. Create an Fts3Expr ** structure of type FTSQUERY_PHRASE containing a phrase consisting of this @@ -183,15 +188,39 @@ int nConsumed = 0; rc = sqlite3Fts3OpenTokenizer(pTokenizer, pParse->iLangid, z, n, &pCursor); if( rc==SQLITE_OK ){ const char *zToken; - int nToken, iStart, iEnd, iPosition; + int nToken = 0, iStart = 0, iEnd = 0, iPosition = 0; int nByte; /* total space to allocate */ rc = pModule->xNext(pCursor, &zToken, &nToken, &iStart, &iEnd, &iPosition); - if( rc==SQLITE_OK ){ + + if( (rc==SQLITE_OK || rc==SQLITE_DONE) && sqlite3_fts3_enable_parentheses ){ + int i; + if( rc==SQLITE_DONE ) iStart = n; + for(i=0; inNest++; + rc = fts3ExprParse(pParse, &z[i+1], n-i-1, &pRet, &nConsumed); + if( rc==SQLITE_OK && !pRet ){ + rc = SQLITE_DONE; + } + nConsumed = (int)(i + 1 + nConsumed); + break; + } + + if( z[i]==')' ){ + rc = SQLITE_DONE; + pParse->nNest--; + nConsumed = i+1; + break; + } + } + } + + if( nConsumed==0 && rc==SQLITE_OK ){ nByte = sizeof(Fts3Expr) + sizeof(Fts3Phrase) + nToken; pRet = (Fts3Expr *)fts3MallocZero(nByte); if( !pRet ){ rc = SQLITE_NOMEM; }else{ @@ -298,11 +327,11 @@ pTokenizer, pParse->iLangid, zInput, nInput, &pCursor); if( rc==SQLITE_OK ){ int ii; for(ii=0; rc==SQLITE_OK; ii++){ const char *zByte; - int nByte, iBegin, iEnd, iPos; + int nByte = 0, iBegin = 0, iEnd = 0, iPos = 0; rc = pModule->xNext(pCursor, &zByte, &nByte, &iBegin, &iEnd, &iPos); if( rc==SQLITE_OK ){ Fts3PhraseToken *pToken; p = fts3ReallocOrFree(p, nSpace + ii*sizeof(Fts3PhraseToken)); @@ -367,16 +396,10 @@ sqlite3_free(p); *ppExpr = 0; return SQLITE_NOMEM; } -/* -** Function getNextNode(), which is called by fts3ExprParse(), may itself -** call fts3ExprParse(). So this forward declaration is required. -*/ -static int fts3ExprParse(ParseContext *, const char *, int, Fts3Expr **, int *); - /* ** The output variable *ppExpr is populated with an allocated Fts3Expr ** structure, or set to 0 if the end of the input buffer is reached. ** ** Returns an SQLite error code. SQLITE_OK if everything works, SQLITE_NOMEM @@ -469,31 +492,10 @@ ** user has supplied a token such as "ORacle". Continue. */ } } - /* Check for an open bracket. */ - if( sqlite3_fts3_enable_parentheses ){ - if( *zInput=='(' ){ - int nConsumed; - pParse->nNest++; - rc = fts3ExprParse(pParse, &zInput[1], nInput-1, ppExpr, &nConsumed); - if( rc==SQLITE_OK && !*ppExpr ){ - rc = SQLITE_DONE; - } - *pnConsumed = (int)((zInput - z) + 1 + nConsumed); - return rc; - } - - /* Check for a close bracket. */ - if( *zInput==')' ){ - pParse->nNest--; - *pnConsumed = (int)((zInput - z) + 1); - return SQLITE_DONE; - } - } - /* See if we are dealing with a quoted phrase. If this is the case, then ** search for the closing quote and pass the whole string to getNextString() ** for processing. This is easy to do, as fts3 has no syntax for escaping ** a quote character embedded in a string. */ @@ -638,12 +640,14 @@ rc = SQLITE_NOMEM; goto exprparse_out; } pNot->eType = FTSQUERY_NOT; pNot->pRight = p; + p->pParent = pNot; if( pNotBranch ){ pNot->pLeft = pNotBranch; + pNotBranch->pParent = pNot; } pNotBranch = pNot; p = pPrev; }else{ int eType = p->eType; @@ -727,10 +731,11 @@ Fts3Expr *pIter = pNotBranch; while( pIter->pLeft ){ pIter = pIter->pLeft; } pIter->pLeft = pRet; + pRet->pParent = pIter; pRet = pNotBranch; } } } *pnConsumed = n - nIn; @@ -742,10 +747,227 @@ pRet = 0; } *ppExpr = pRet; return rc; } + +/* +** Return SQLITE_ERROR if the maximum depth of the expression tree passed +** as the only argument is more than nMaxDepth. +*/ +static int fts3ExprCheckDepth(Fts3Expr *p, int nMaxDepth){ + int rc = SQLITE_OK; + if( p ){ + if( nMaxDepth<0 ){ + rc = SQLITE_TOOBIG; + }else{ + rc = fts3ExprCheckDepth(p->pLeft, nMaxDepth-1); + if( rc==SQLITE_OK ){ + rc = fts3ExprCheckDepth(p->pRight, nMaxDepth-1); + } + } + } + return rc; +} + +/* +** This function attempts to transform the expression tree at (*pp) to +** an equivalent but more balanced form. The tree is modified in place. +** If successful, SQLITE_OK is returned and (*pp) set to point to the +** new root expression node. +** +** nMaxDepth is the maximum allowable depth of the balanced sub-tree. +** +** Otherwise, if an error occurs, an SQLite error code is returned and +** expression (*pp) freed. +*/ +static int fts3ExprBalance(Fts3Expr **pp, int nMaxDepth){ + int rc = SQLITE_OK; /* Return code */ + Fts3Expr *pRoot = *pp; /* Initial root node */ + Fts3Expr *pFree = 0; /* List of free nodes. Linked by pParent. */ + int eType = pRoot->eType; /* Type of node in this tree */ + + if( nMaxDepth==0 ){ + rc = SQLITE_ERROR; + } + + if( rc==SQLITE_OK && (eType==FTSQUERY_AND || eType==FTSQUERY_OR) ){ + Fts3Expr **apLeaf; + apLeaf = (Fts3Expr **)sqlite3_malloc(sizeof(Fts3Expr *) * nMaxDepth); + if( 0==apLeaf ){ + rc = SQLITE_NOMEM; + }else{ + memset(apLeaf, 0, sizeof(Fts3Expr *) * nMaxDepth); + } + + if( rc==SQLITE_OK ){ + int i; + Fts3Expr *p; + + /* Set $p to point to the left-most leaf in the tree of eType nodes. */ + for(p=pRoot; p->eType==eType; p=p->pLeft){ + assert( p->pParent==0 || p->pParent->pLeft==p ); + assert( p->pLeft && p->pRight ); + } + + /* This loop runs once for each leaf in the tree of eType nodes. */ + while( 1 ){ + int iLvl; + Fts3Expr *pParent = p->pParent; /* Current parent of p */ + + assert( pParent==0 || pParent->pLeft==p ); + p->pParent = 0; + if( pParent ){ + pParent->pLeft = 0; + }else{ + pRoot = 0; + } + rc = fts3ExprBalance(&p, nMaxDepth-1); + if( rc!=SQLITE_OK ) break; + + for(iLvl=0; p && iLvlpLeft = apLeaf[iLvl]; + pFree->pRight = p; + pFree->pLeft->pParent = pFree; + pFree->pRight->pParent = pFree; + + p = pFree; + pFree = pFree->pParent; + p->pParent = 0; + apLeaf[iLvl] = 0; + } + } + if( p ){ + sqlite3Fts3ExprFree(p); + rc = SQLITE_TOOBIG; + break; + } + + /* If that was the last leaf node, break out of the loop */ + if( pParent==0 ) break; + + /* Set $p to point to the next leaf in the tree of eType nodes */ + for(p=pParent->pRight; p->eType==eType; p=p->pLeft); + + /* Remove pParent from the original tree. */ + assert( pParent->pParent==0 || pParent->pParent->pLeft==pParent ); + pParent->pRight->pParent = pParent->pParent; + if( pParent->pParent ){ + pParent->pParent->pLeft = pParent->pRight; + }else{ + assert( pParent==pRoot ); + pRoot = pParent->pRight; + } + + /* Link pParent into the free node list. It will be used as an + ** internal node of the new tree. */ + pParent->pParent = pFree; + pFree = pParent; + } + + if( rc==SQLITE_OK ){ + p = 0; + for(i=0; ipParent = 0; + }else{ + assert( pFree!=0 ); + pFree->pRight = p; + pFree->pLeft = apLeaf[i]; + pFree->pLeft->pParent = pFree; + pFree->pRight->pParent = pFree; + + p = pFree; + pFree = pFree->pParent; + p->pParent = 0; + } + } + } + pRoot = p; + }else{ + /* An error occurred. Delete the contents of the apLeaf[] array + ** and pFree list. Everything else is cleaned up by the call to + ** sqlite3Fts3ExprFree(pRoot) below. */ + Fts3Expr *pDel; + for(i=0; ipParent; + sqlite3_free(pDel); + } + } + + assert( pFree==0 ); + sqlite3_free( apLeaf ); + } + } + + if( rc!=SQLITE_OK ){ + sqlite3Fts3ExprFree(pRoot); + pRoot = 0; + } + *pp = pRoot; + return rc; +} + +/* +** This function is similar to sqlite3Fts3ExprParse(), with the following +** differences: +** +** 1. It does not do expression rebalancing. +** 2. It does not check that the expression does not exceed the +** maximum allowable depth. +** 3. Even if it fails, *ppExpr may still be set to point to an +** expression tree. It should be deleted using sqlite3Fts3ExprFree() +** in this case. +*/ +static int fts3ExprParseUnbalanced( + sqlite3_tokenizer *pTokenizer, /* Tokenizer module */ + int iLangid, /* Language id for tokenizer */ + char **azCol, /* Array of column names for fts3 table */ + int bFts4, /* True to allow FTS4-only syntax */ + int nCol, /* Number of entries in azCol[] */ + int iDefaultCol, /* Default column to query */ + const char *z, int n, /* Text of MATCH query */ + Fts3Expr **ppExpr /* OUT: Parsed query structure */ +){ + int nParsed; + int rc; + ParseContext sParse; + + memset(&sParse, 0, sizeof(ParseContext)); + sParse.pTokenizer = pTokenizer; + sParse.iLangid = iLangid; + sParse.azCol = (const char **)azCol; + sParse.nCol = nCol; + sParse.iDefaultCol = iDefaultCol; + sParse.bFts4 = bFts4; + if( z==0 ){ + *ppExpr = 0; + return SQLITE_OK; + } + if( n<0 ){ + n = (int)strlen(z); + } + rc = fts3ExprParse(&sParse, z, n, ppExpr, &nParsed); + assert( rc==SQLITE_OK || *ppExpr==0 ); + + /* Check for mismatched parenthesis */ + if( rc==SQLITE_OK && sParse.nNest ){ + rc = SQLITE_ERROR; + } + + return rc; +} /* ** Parameters z and n contain a pointer to and length of a buffer containing ** an fts3 query expression, respectively. This function attempts to parse the ** query expression and create a tree of Fts3Expr structures representing the @@ -775,53 +997,78 @@ char **azCol, /* Array of column names for fts3 table */ int bFts4, /* True to allow FTS4-only syntax */ int nCol, /* Number of entries in azCol[] */ int iDefaultCol, /* Default column to query */ const char *z, int n, /* Text of MATCH query */ - Fts3Expr **ppExpr /* OUT: Parsed query structure */ + Fts3Expr **ppExpr, /* OUT: Parsed query structure */ + char **pzErr /* OUT: Error message (sqlite3_malloc) */ ){ - int nParsed; - int rc; - ParseContext sParse; + int rc = fts3ExprParseUnbalanced( + pTokenizer, iLangid, azCol, bFts4, nCol, iDefaultCol, z, n, ppExpr + ); + + /* Rebalance the expression. And check that its depth does not exceed + ** SQLITE_FTS3_MAX_EXPR_DEPTH. */ + if( rc==SQLITE_OK && *ppExpr ){ + rc = fts3ExprBalance(ppExpr, SQLITE_FTS3_MAX_EXPR_DEPTH); + if( rc==SQLITE_OK ){ + rc = fts3ExprCheckDepth(*ppExpr, SQLITE_FTS3_MAX_EXPR_DEPTH); + } + } - memset(&sParse, 0, sizeof(ParseContext)); - sParse.pTokenizer = pTokenizer; - sParse.iLangid = iLangid; - sParse.azCol = (const char **)azCol; - sParse.nCol = nCol; - sParse.iDefaultCol = iDefaultCol; - sParse.bFts4 = bFts4; - if( z==0 ){ - *ppExpr = 0; - return SQLITE_OK; - } - if( n<0 ){ - n = (int)strlen(z); - } - rc = fts3ExprParse(&sParse, z, n, ppExpr, &nParsed); - - /* Check for mismatched parenthesis */ - if( rc==SQLITE_OK && sParse.nNest ){ - rc = SQLITE_ERROR; + if( rc!=SQLITE_OK ){ sqlite3Fts3ExprFree(*ppExpr); *ppExpr = 0; + if( rc==SQLITE_TOOBIG ){ + *pzErr = sqlite3_mprintf( + "FTS expression tree is too large (maximum depth %d)", + SQLITE_FTS3_MAX_EXPR_DEPTH + ); + rc = SQLITE_ERROR; + }else if( rc==SQLITE_ERROR ){ + *pzErr = sqlite3_mprintf("malformed MATCH expression: [%s]", z); + } } return rc; } + +/* +** Free a single node of an expression tree. +*/ +static void fts3FreeExprNode(Fts3Expr *p){ + assert( p->eType==FTSQUERY_PHRASE || p->pPhrase==0 ); + sqlite3Fts3EvalPhraseCleanup(p->pPhrase); + sqlite3_free(p->aMI); + sqlite3_free(p); +} /* ** Free a parsed fts3 query expression allocated by sqlite3Fts3ExprParse(). +** +** This function would be simpler if it recursively called itself. But +** that would mean passing a sufficiently large expression to ExprParse() +** could cause a stack overflow. */ -void sqlite3Fts3ExprFree(Fts3Expr *p){ - if( p ){ - assert( p->eType==FTSQUERY_PHRASE || p->pPhrase==0 ); - sqlite3Fts3ExprFree(p->pLeft); - sqlite3Fts3ExprFree(p->pRight); - sqlite3Fts3EvalPhraseCleanup(p->pPhrase); - sqlite3_free(p->aMI); - sqlite3_free(p); +void sqlite3Fts3ExprFree(Fts3Expr *pDel){ + Fts3Expr *p; + assert( pDel==0 || pDel->pParent==0 ); + for(p=pDel; p && (p->pLeft||p->pRight); p=(p->pLeft ? p->pLeft : p->pRight)){ + assert( p->pParent==0 || p==p->pParent->pRight || p==p->pParent->pLeft ); + } + while( p ){ + Fts3Expr *pParent = p->pParent; + fts3FreeExprNode(p); + if( pParent && p==pParent->pLeft && pParent->pRight ){ + p = pParent->pRight; + while( p && (p->pLeft || p->pRight) ){ + assert( p==p->pParent->pRight || p==p->pParent->pLeft ); + p = (p->pLeft ? p->pLeft : p->pRight); + } + }else{ + p = pParent; + } } } /**************************************************************************** ***************************************************************************** @@ -869,10 +1116,13 @@ ** ** If the second argument is not NULL, then its contents are prepended to ** the returned expression text and then freed using sqlite3_free(). */ static char *exprToString(Fts3Expr *pExpr, char *zBuf){ + if( pExpr==0 ){ + return sqlite3_mprintf(""); + } switch( pExpr->eType ){ case FTSQUERY_PHRASE: { Fts3Phrase *pPhrase = pExpr->pPhrase; int i; zBuf = sqlite3_mprintf( @@ -976,14 +1226,25 @@ } for(ii=0; ii 0 ){ h = (h<<3) ^ h ^ *z++; nKey--; } - return h & 0x7fffffff; + return (int)(h & 0x7fffffff); } static int fts3StrCompare(const void *pKey1, int n1, const void *pKey2, int n2){ if( n1!=n2 ) return 1; return strncmp((const char*)pKey1,(const char*)pKey2,n1); } Index: ext/fts3/fts3_hash.h ================================================================== --- ext/fts3/fts3_hash.h +++ ext/fts3/fts3_hash.h @@ -7,11 +7,11 @@ ** May you do good and not evil. ** May you find forgiveness for yourself and forgive others. ** May you share freely, never taking more than you give. ** ************************************************************************* -** This is the header file for the generic hash-table implemenation +** This is the header file for the generic hash-table implementation ** used in SQLite. We've modified it slightly to serve as a standalone ** hash table implementation for the full-text indexing module. ** */ #ifndef _FTS3_HASH_H_ Index: ext/fts3/fts3_icu.c ================================================================== --- ext/fts3/fts3_icu.c +++ ext/fts3/fts3_icu.c @@ -117,19 +117,19 @@ nInput = strlen(zInput); } nChar = nInput+1; pCsr = (IcuCursor *)sqlite3_malloc( sizeof(IcuCursor) + /* IcuCursor */ - nChar * sizeof(UChar) + /* IcuCursor.aChar[] */ + ((nChar+3)&~3) * sizeof(UChar) + /* IcuCursor.aChar[] */ (nChar+1) * sizeof(int) /* IcuCursor.aOffset[] */ ); if( !pCsr ){ return SQLITE_NOMEM; } memset(pCsr, 0, sizeof(IcuCursor)); pCsr->aChar = (UChar *)&pCsr[1]; - pCsr->aOffset = (int *)&pCsr->aChar[nChar]; + pCsr->aOffset = (int *)&pCsr->aChar[(nChar+3)&~3]; pCsr->aOffset[iOut] = iInput; U8_NEXT(zInput, iInput, nInput, c); while( c>0 ){ int isError = 0; Index: ext/fts3/fts3_porter.c ================================================================== --- ext/fts3/fts3_porter.c +++ ext/fts3/fts3_porter.c @@ -401,61 +401,74 @@ } /* Step 2 */ switch( z[1] ){ case 'a': - stem(&z, "lanoita", "ate", m_gt_0) || - stem(&z, "lanoit", "tion", m_gt_0); + if( !stem(&z, "lanoita", "ate", m_gt_0) ){ + stem(&z, "lanoit", "tion", m_gt_0); + } break; case 'c': - stem(&z, "icne", "ence", m_gt_0) || - stem(&z, "icna", "ance", m_gt_0); + if( !stem(&z, "icne", "ence", m_gt_0) ){ + stem(&z, "icna", "ance", m_gt_0); + } break; case 'e': stem(&z, "rezi", "ize", m_gt_0); break; case 'g': stem(&z, "igol", "log", m_gt_0); break; case 'l': - stem(&z, "ilb", "ble", m_gt_0) || - stem(&z, "illa", "al", m_gt_0) || - stem(&z, "iltne", "ent", m_gt_0) || - stem(&z, "ile", "e", m_gt_0) || - stem(&z, "ilsuo", "ous", m_gt_0); + if( !stem(&z, "ilb", "ble", m_gt_0) + && !stem(&z, "illa", "al", m_gt_0) + && !stem(&z, "iltne", "ent", m_gt_0) + && !stem(&z, "ile", "e", m_gt_0) + ){ + stem(&z, "ilsuo", "ous", m_gt_0); + } break; case 'o': - stem(&z, "noitazi", "ize", m_gt_0) || - stem(&z, "noita", "ate", m_gt_0) || - stem(&z, "rota", "ate", m_gt_0); + if( !stem(&z, "noitazi", "ize", m_gt_0) + && !stem(&z, "noita", "ate", m_gt_0) + ){ + stem(&z, "rota", "ate", m_gt_0); + } break; case 's': - stem(&z, "msila", "al", m_gt_0) || - stem(&z, "ssenevi", "ive", m_gt_0) || - stem(&z, "ssenluf", "ful", m_gt_0) || - stem(&z, "ssensuo", "ous", m_gt_0); + if( !stem(&z, "msila", "al", m_gt_0) + && !stem(&z, "ssenevi", "ive", m_gt_0) + && !stem(&z, "ssenluf", "ful", m_gt_0) + ){ + stem(&z, "ssensuo", "ous", m_gt_0); + } break; case 't': - stem(&z, "itila", "al", m_gt_0) || - stem(&z, "itivi", "ive", m_gt_0) || - stem(&z, "itilib", "ble", m_gt_0); + if( !stem(&z, "itila", "al", m_gt_0) + && !stem(&z, "itivi", "ive", m_gt_0) + ){ + stem(&z, "itilib", "ble", m_gt_0); + } break; } /* Step 3 */ switch( z[0] ){ case 'e': - stem(&z, "etaci", "ic", m_gt_0) || - stem(&z, "evita", "", m_gt_0) || - stem(&z, "ezila", "al", m_gt_0); + if( !stem(&z, "etaci", "ic", m_gt_0) + && !stem(&z, "evita", "", m_gt_0) + ){ + stem(&z, "ezila", "al", m_gt_0); + } break; case 'i': stem(&z, "itici", "ic", m_gt_0); break; case 'l': - stem(&z, "laci", "ic", m_gt_0) || - stem(&z, "luf", "", m_gt_0); + if( !stem(&z, "laci", "ic", m_gt_0) ){ + stem(&z, "luf", "", m_gt_0); + } break; case 's': stem(&z, "ssen", "", m_gt_0); break; } @@ -492,13 +505,15 @@ if( z[2]=='a' ){ if( m_gt_1(z+3) ){ z += 3; } }else if( z[2]=='e' ){ - stem(&z, "tneme", "", m_gt_1) || - stem(&z, "tnem", "", m_gt_1) || - stem(&z, "tne", "", m_gt_1); + if( !stem(&z, "tneme", "", m_gt_1) + && !stem(&z, "tnem", "", m_gt_1) + ){ + stem(&z, "tne", "", m_gt_1); + } } } break; case 'o': if( z[0]=='u' ){ @@ -513,12 +528,13 @@ if( z[0]=='m' && z[2]=='i' && m_gt_1(z+3) ){ z += 3; } break; case 't': - stem(&z, "eta", "", m_gt_1) || - stem(&z, "iti", "", m_gt_1); + if( !stem(&z, "eta", "", m_gt_1) ){ + stem(&z, "iti", "", m_gt_1); + } break; case 'u': if( z[0]=='s' && z[2]=='o' && m_gt_1(z+3) ){ z += 3; } Index: ext/fts3/fts3_snippet.c ================================================================== --- ext/fts3/fts3_snippet.c +++ ext/fts3/fts3_snippet.c @@ -126,11 +126,11 @@ ** After it returns, *piPos contains the value of the next element of the ** list and *pp is advanced to the following varint. */ static void fts3GetDeltaPosition(char **pp, int *piPos){ int iVal; - *pp += sqlite3Fts3GetVarint32(*pp, &iVal); + *pp += fts3GetVarint32(*pp, &iVal); *piPos += (iVal-2); } /* ** Helper function for fts3ExprIterate() (see below). @@ -387,13 +387,13 @@ ** Select the fragment of text consisting of nFragment contiguous tokens ** from column iCol that represent the "best" snippet. The best snippet ** is the snippet with the highest score, where scores are calculated ** by adding: ** -** (a) +1 point for each occurence of a matchable phrase in the snippet. +** (a) +1 point for each occurrence of a matchable phrase in the snippet. ** -** (b) +1000 points for the first occurence of each matchable phrase in +** (b) +1000 points for the first occurrence of each matchable phrase in ** the snippet for which the corresponding mCovered bit is not set. ** ** The selected snippet parameters are stored in structure *pFragment before ** returning. The score of the selected snippet is stored in *piScore ** before returning. @@ -502,10 +502,11 @@ return SQLITE_NOMEM; } pStr->z = zNew; pStr->nAlloc = nAlloc; } + assert( pStr->z!=0 && (pStr->nAlloc >= pStr->n+nAppend+1) ); /* Append the data to the string buffer. */ memcpy(&pStr->z[pStr->n], zAppend, nAppend); pStr->n += nAppend; pStr->z[pStr->n] = '\0'; @@ -574,11 +575,11 @@ rc = sqlite3Fts3OpenTokenizer(pTab->pTokenizer, iLangid, zDoc, nDoc, &pC); if( rc!=SQLITE_OK ){ return rc; } while( rc==SQLITE_OK && iCurrent<(nSnippet+nDesired) ){ - const char *ZDUMMY; int DUMMY1, DUMMY2, DUMMY3; + const char *ZDUMMY; int DUMMY1 = 0, DUMMY2 = 0, DUMMY3 = 0; rc = pMod->xNext(pC, &ZDUMMY, &DUMMY1, &DUMMY2, &DUMMY3, &iCurrent); } pMod->xClose(pC); if( rc!=SQLITE_OK && rc!=SQLITE_DONE ){ return rc; } @@ -618,12 +619,10 @@ int iPos = pFragment->iPos; /* First token of snippet */ u64 hlmask = pFragment->hlmask; /* Highlight-mask for snippet */ int iCol = pFragment->iCol+1; /* Query column to extract text from */ sqlite3_tokenizer_module *pMod; /* Tokenizer module methods object */ sqlite3_tokenizer_cursor *pC; /* Tokenizer cursor open on zDoc/nDoc */ - const char *ZDUMMY; /* Dummy argument used with tokenizer */ - int DUMMY1; /* Dummy argument used with tokenizer */ zDoc = (const char *)sqlite3_column_text(pCsr->pStmt, iCol); if( zDoc==0 ){ if( sqlite3_column_type(pCsr->pStmt, iCol)!=SQLITE_NULL ){ return SQLITE_NOMEM; @@ -638,14 +637,27 @@ if( rc!=SQLITE_OK ){ return rc; } while( rc==SQLITE_OK ){ - int iBegin; /* Offset in zDoc of start of token */ - int iFin; /* Offset in zDoc of end of token */ - int isHighlight; /* True for highlighted terms */ + const char *ZDUMMY; /* Dummy argument used with tokenizer */ + int DUMMY1 = -1; /* Dummy argument used with tokenizer */ + int iBegin = 0; /* Offset in zDoc of start of token */ + int iFin = 0; /* Offset in zDoc of end of token */ + int isHighlight = 0; /* True for highlighted terms */ + /* Variable DUMMY1 is initialized to a negative value above. Elsewhere + ** in the FTS code the variable that the third argument to xNext points to + ** is initialized to zero before the first (*but not necessarily + ** subsequent*) call to xNext(). This is done for a particular application + ** that needs to know whether or not the tokenizer is being used for + ** snippet generation or for some other purpose. + ** + ** Extreme care is required when writing code to depend on this + ** initialization. It is not a documented part of the tokenizer interface. + ** If a tokenizer is used directly by any code outside of FTS, this + ** convention might not be respected. */ rc = pMod->xNext(pC, &ZDUMMY, &DUMMY1, &iBegin, &iFin, &iCurrent); if( rc!=SQLITE_OK ){ if( rc==SQLITE_DONE ){ /* Special case - the last token of the snippet is also the last token ** of the column. Append any punctuation that occurred between the end @@ -1331,12 +1343,10 @@ sqlite3_context *pCtx, /* SQLite function call context */ Fts3Cursor *pCsr /* Cursor object */ ){ Fts3Table *pTab = (Fts3Table *)pCsr->base.pVtab; sqlite3_tokenizer_module const *pMod = pTab->pTokenizer->pModule; - const char *ZDUMMY; /* Dummy argument used with xNext() */ - int NDUMMY; /* Dummy argument used with xNext() */ int rc; /* Return Code */ int nToken; /* Number of tokens in query */ int iCol; /* Column currently being processed */ StrBuffer res = {0, 0, 0}; /* Result string */ TermOffsetCtx sCtx; /* Context for fts3ExprTermOffsetInit() */ @@ -1365,13 +1375,15 @@ /* Loop through the table columns, appending offset information to ** string-buffer res for each column. */ for(iCol=0; iColnColumn; iCol++){ sqlite3_tokenizer_cursor *pC; /* Tokenizer cursor */ - int iStart; - int iEnd; - int iCurrent; + const char *ZDUMMY; /* Dummy argument used with xNext() */ + int NDUMMY = 0; /* Dummy argument used with xNext() */ + int iStart = 0; + int iEnd = 0; + int iCurrent = 0; const char *zDoc; int nDoc; /* Initialize the contents of sCtx.aTerm[] for column iCol. There is ** no way that this operation can fail, so the return code from Index: ext/fts3/fts3_test.c ================================================================== --- ext/fts3/fts3_test.c +++ ext/fts3/fts3_test.c @@ -265,11 +265,11 @@ ** in. The second argument is the minimum doclist size in bytes to use ** incremental loading with. ** ** Whether or not the arguments are present, this command returns a list of ** two integers - the initial chunksize and threshold when the command is -** invoked. This can be used to restore the default behaviour after running +** invoked. This can be used to restore the default behavior after running ** tests. For example: ** ** # Override incr-load settings for testing: ** set cfg [fts3_configure_incr_load $new_chunksize $new_threshold] ** @@ -514,10 +514,55 @@ )); #endif UNUSED_PARAMETER(clientData); return TCL_OK; } + +static int fts3_test_varint_cmd( + ClientData clientData, + Tcl_Interp *interp, + int objc, + Tcl_Obj *CONST objv[] +){ +#ifdef SQLITE_ENABLE_FTS3 + char aBuf[24]; + int rc; + Tcl_WideInt w, w2; + int nByte, nByte2; + + if( objc!=2 ){ + Tcl_WrongNumArgs(interp, 1, objv, "INTEGER"); + return TCL_ERROR; + } + + rc = Tcl_GetWideIntFromObj(interp, objv[1], &w); + if( rc!=TCL_OK ) return rc; + + nByte = sqlite3Fts3PutVarint(aBuf, w); + nByte2 = sqlite3Fts3GetVarint(aBuf, &w2); + if( w!=w2 || nByte!=nByte2 ){ + char *zErr = sqlite3_mprintf("error testing %lld", w); + Tcl_ResetResult(interp); + Tcl_AppendResult(interp, zErr, 0); + return TCL_ERROR; + } + + if( w<=2147483647 && w>=0 ){ + int i; + nByte2 = fts3GetVarint32(aBuf, &i); + if( (int)w!=i || nByte!=nByte2 ){ + char *zErr = sqlite3_mprintf("error testing %lld (32-bit)", w); + Tcl_ResetResult(interp); + Tcl_AppendResult(interp, zErr, 0); + return TCL_ERROR; + } + } + +#endif + UNUSED_PARAMETER(clientData); + return TCL_OK; +} /* ** End of tokenizer code. **************************************************************************/ @@ -527,9 +572,13 @@ "fts3_configure_incr_load", fts3_configure_incr_load_cmd, 0, 0 ); Tcl_CreateObjCommand( interp, "fts3_test_tokenizer", fts3_test_tokenizer_cmd, 0, 0 ); + + Tcl_CreateObjCommand( + interp, "fts3_test_varint", fts3_test_varint_cmd, 0, 0 + ); return TCL_OK; } #endif /* SQLITE_ENABLE_FTS3 || SQLITE_ENABLE_FTS4 */ #endif /* ifdef SQLITE_TEST */ ADDED ext/fts3/fts3_tokenize_vtab.c Index: ext/fts3/fts3_tokenize_vtab.c ================================================================== --- ext/fts3/fts3_tokenize_vtab.c +++ ext/fts3/fts3_tokenize_vtab.c @@ -0,0 +1,454 @@ +/* +** 2013 Apr 22 +** +** The author disclaims copyright to this source code. In place of +** a legal notice, here is a blessing: +** +** May you do good and not evil. +** May you find forgiveness for yourself and forgive others. +** May you share freely, never taking more than you give. +** +****************************************************************************** +** +** This file contains code for the "fts3tokenize" virtual table module. +** An fts3tokenize virtual table is created as follows: +** +** CREATE VIRTUAL TABLE USING fts3tokenize( +** , , ... +** ); +** +** The table created has the following schema: +** +** CREATE TABLE (input, token, start, end, position) +** +** When queried, the query must include a WHERE clause of type: +** +** input = +** +** The virtual table module tokenizes this , using the FTS3 +** tokenizer specified by the arguments to the CREATE VIRTUAL TABLE +** statement and returns one row for each token in the result. With +** fields set as follows: +** +** input: Always set to a copy of +** token: A token from the input. +** start: Byte offset of the token within the input . +** end: Byte offset of the byte immediately following the end of the +** token within the input string. +** pos: Token offset of token within input. +** +*/ +#include "fts3Int.h" +#if !defined(SQLITE_CORE) || defined(SQLITE_ENABLE_FTS3) + +#include +#include + +typedef struct Fts3tokTable Fts3tokTable; +typedef struct Fts3tokCursor Fts3tokCursor; + +/* +** Virtual table structure. +*/ +struct Fts3tokTable { + sqlite3_vtab base; /* Base class used by SQLite core */ + const sqlite3_tokenizer_module *pMod; + sqlite3_tokenizer *pTok; +}; + +/* +** Virtual table cursor structure. +*/ +struct Fts3tokCursor { + sqlite3_vtab_cursor base; /* Base class used by SQLite core */ + char *zInput; /* Input string */ + sqlite3_tokenizer_cursor *pCsr; /* Cursor to iterate through zInput */ + int iRowid; /* Current 'rowid' value */ + const char *zToken; /* Current 'token' value */ + int nToken; /* Size of zToken in bytes */ + int iStart; /* Current 'start' value */ + int iEnd; /* Current 'end' value */ + int iPos; /* Current 'pos' value */ +}; + +/* +** Query FTS for the tokenizer implementation named zName. +*/ +static int fts3tokQueryTokenizer( + Fts3Hash *pHash, + const char *zName, + const sqlite3_tokenizer_module **pp, + char **pzErr +){ + sqlite3_tokenizer_module *p; + int nName = (int)strlen(zName); + + p = (sqlite3_tokenizer_module *)sqlite3Fts3HashFind(pHash, zName, nName+1); + if( !p ){ + *pzErr = sqlite3_mprintf("unknown tokenizer: %s", zName); + return SQLITE_ERROR; + } + + *pp = p; + return SQLITE_OK; +} + +/* +** The second argument, argv[], is an array of pointers to nul-terminated +** strings. This function makes a copy of the array and strings into a +** single block of memory. It then dequotes any of the strings that appear +** to be quoted. +** +** If successful, output parameter *pazDequote is set to point at the +** array of dequoted strings and SQLITE_OK is returned. The caller is +** responsible for eventually calling sqlite3_free() to free the array +** in this case. Or, if an error occurs, an SQLite error code is returned. +** The final value of *pazDequote is undefined in this case. +*/ +static int fts3tokDequoteArray( + int argc, /* Number of elements in argv[] */ + const char * const *argv, /* Input array */ + char ***pazDequote /* Output array */ +){ + int rc = SQLITE_OK; /* Return code */ + if( argc==0 ){ + *pazDequote = 0; + }else{ + int i; + int nByte = 0; + char **azDequote; + + for(i=0; ixCreate((nDequote>1 ? nDequote-1 : 0), azArg, &pTok); + } + + if( rc==SQLITE_OK ){ + pTab = (Fts3tokTable *)sqlite3_malloc(sizeof(Fts3tokTable)); + if( pTab==0 ){ + rc = SQLITE_NOMEM; + } + } + + if( rc==SQLITE_OK ){ + memset(pTab, 0, sizeof(Fts3tokTable)); + pTab->pMod = pMod; + pTab->pTok = pTok; + *ppVtab = &pTab->base; + }else{ + if( pTok ){ + pMod->xDestroy(pTok); + } + } + + sqlite3_free(azDequote); + return rc; +} + +/* +** This function does the work for both the xDisconnect and xDestroy methods. +** These tables have no persistent representation of their own, so xDisconnect +** and xDestroy are identical operations. +*/ +static int fts3tokDisconnectMethod(sqlite3_vtab *pVtab){ + Fts3tokTable *pTab = (Fts3tokTable *)pVtab; + + pTab->pMod->xDestroy(pTab->pTok); + sqlite3_free(pTab); + return SQLITE_OK; +} + +/* +** xBestIndex - Analyze a WHERE and ORDER BY clause. +*/ +static int fts3tokBestIndexMethod( + sqlite3_vtab *pVTab, + sqlite3_index_info *pInfo +){ + int i; + UNUSED_PARAMETER(pVTab); + + for(i=0; inConstraint; i++){ + if( pInfo->aConstraint[i].usable + && pInfo->aConstraint[i].iColumn==0 + && pInfo->aConstraint[i].op==SQLITE_INDEX_CONSTRAINT_EQ + ){ + pInfo->idxNum = 1; + pInfo->aConstraintUsage[i].argvIndex = 1; + pInfo->aConstraintUsage[i].omit = 1; + pInfo->estimatedCost = 1; + return SQLITE_OK; + } + } + + pInfo->idxNum = 0; + assert( pInfo->estimatedCost>1000000.0 ); + + return SQLITE_OK; +} + +/* +** xOpen - Open a cursor. +*/ +static int fts3tokOpenMethod(sqlite3_vtab *pVTab, sqlite3_vtab_cursor **ppCsr){ + Fts3tokCursor *pCsr; + UNUSED_PARAMETER(pVTab); + + pCsr = (Fts3tokCursor *)sqlite3_malloc(sizeof(Fts3tokCursor)); + if( pCsr==0 ){ + return SQLITE_NOMEM; + } + memset(pCsr, 0, sizeof(Fts3tokCursor)); + + *ppCsr = (sqlite3_vtab_cursor *)pCsr; + return SQLITE_OK; +} + +/* +** Reset the tokenizer cursor passed as the only argument. As if it had +** just been returned by fts3tokOpenMethod(). +*/ +static void fts3tokResetCursor(Fts3tokCursor *pCsr){ + if( pCsr->pCsr ){ + Fts3tokTable *pTab = (Fts3tokTable *)(pCsr->base.pVtab); + pTab->pMod->xClose(pCsr->pCsr); + pCsr->pCsr = 0; + } + sqlite3_free(pCsr->zInput); + pCsr->zInput = 0; + pCsr->zToken = 0; + pCsr->nToken = 0; + pCsr->iStart = 0; + pCsr->iEnd = 0; + pCsr->iPos = 0; + pCsr->iRowid = 0; +} + +/* +** xClose - Close a cursor. +*/ +static int fts3tokCloseMethod(sqlite3_vtab_cursor *pCursor){ + Fts3tokCursor *pCsr = (Fts3tokCursor *)pCursor; + + fts3tokResetCursor(pCsr); + sqlite3_free(pCsr); + return SQLITE_OK; +} + +/* +** xNext - Advance the cursor to the next row, if any. +*/ +static int fts3tokNextMethod(sqlite3_vtab_cursor *pCursor){ + Fts3tokCursor *pCsr = (Fts3tokCursor *)pCursor; + Fts3tokTable *pTab = (Fts3tokTable *)(pCursor->pVtab); + int rc; /* Return code */ + + pCsr->iRowid++; + rc = pTab->pMod->xNext(pCsr->pCsr, + &pCsr->zToken, &pCsr->nToken, + &pCsr->iStart, &pCsr->iEnd, &pCsr->iPos + ); + + if( rc!=SQLITE_OK ){ + fts3tokResetCursor(pCsr); + if( rc==SQLITE_DONE ) rc = SQLITE_OK; + } + + return rc; +} + +/* +** xFilter - Initialize a cursor to point at the start of its data. +*/ +static int fts3tokFilterMethod( + sqlite3_vtab_cursor *pCursor, /* The cursor used for this query */ + int idxNum, /* Strategy index */ + const char *idxStr, /* Unused */ + int nVal, /* Number of elements in apVal */ + sqlite3_value **apVal /* Arguments for the indexing scheme */ +){ + int rc = SQLITE_ERROR; + Fts3tokCursor *pCsr = (Fts3tokCursor *)pCursor; + Fts3tokTable *pTab = (Fts3tokTable *)(pCursor->pVtab); + UNUSED_PARAMETER(idxStr); + UNUSED_PARAMETER(nVal); + + fts3tokResetCursor(pCsr); + if( idxNum==1 ){ + const char *zByte = (const char *)sqlite3_value_text(apVal[0]); + int nByte = sqlite3_value_bytes(apVal[0]); + pCsr->zInput = sqlite3_malloc(nByte+1); + if( pCsr->zInput==0 ){ + rc = SQLITE_NOMEM; + }else{ + memcpy(pCsr->zInput, zByte, nByte); + pCsr->zInput[nByte] = 0; + rc = pTab->pMod->xOpen(pTab->pTok, pCsr->zInput, nByte, &pCsr->pCsr); + if( rc==SQLITE_OK ){ + pCsr->pCsr->pTokenizer = pTab->pTok; + } + } + } + + if( rc!=SQLITE_OK ) return rc; + return fts3tokNextMethod(pCursor); +} + +/* +** xEof - Return true if the cursor is at EOF, or false otherwise. +*/ +static int fts3tokEofMethod(sqlite3_vtab_cursor *pCursor){ + Fts3tokCursor *pCsr = (Fts3tokCursor *)pCursor; + return (pCsr->zToken==0); +} + +/* +** xColumn - Return a column value. +*/ +static int fts3tokColumnMethod( + sqlite3_vtab_cursor *pCursor, /* Cursor to retrieve value from */ + sqlite3_context *pCtx, /* Context for sqlite3_result_xxx() calls */ + int iCol /* Index of column to read value from */ +){ + Fts3tokCursor *pCsr = (Fts3tokCursor *)pCursor; + + /* CREATE TABLE x(input, token, start, end, position) */ + switch( iCol ){ + case 0: + sqlite3_result_text(pCtx, pCsr->zInput, -1, SQLITE_TRANSIENT); + break; + case 1: + sqlite3_result_text(pCtx, pCsr->zToken, pCsr->nToken, SQLITE_TRANSIENT); + break; + case 2: + sqlite3_result_int(pCtx, pCsr->iStart); + break; + case 3: + sqlite3_result_int(pCtx, pCsr->iEnd); + break; + default: + assert( iCol==4 ); + sqlite3_result_int(pCtx, pCsr->iPos); + break; + } + return SQLITE_OK; +} + +/* +** xRowid - Return the current rowid for the cursor. +*/ +static int fts3tokRowidMethod( + sqlite3_vtab_cursor *pCursor, /* Cursor to retrieve value from */ + sqlite_int64 *pRowid /* OUT: Rowid value */ +){ + Fts3tokCursor *pCsr = (Fts3tokCursor *)pCursor; + *pRowid = (sqlite3_int64)pCsr->iRowid; + return SQLITE_OK; +} + +/* +** Register the fts3tok module with database connection db. Return SQLITE_OK +** if successful or an error code if sqlite3_create_module() fails. +*/ +int sqlite3Fts3InitTok(sqlite3 *db, Fts3Hash *pHash){ + static const sqlite3_module fts3tok_module = { + 0, /* iVersion */ + fts3tokConnectMethod, /* xCreate */ + fts3tokConnectMethod, /* xConnect */ + fts3tokBestIndexMethod, /* xBestIndex */ + fts3tokDisconnectMethod, /* xDisconnect */ + fts3tokDisconnectMethod, /* xDestroy */ + fts3tokOpenMethod, /* xOpen */ + fts3tokCloseMethod, /* xClose */ + fts3tokFilterMethod, /* xFilter */ + fts3tokNextMethod, /* xNext */ + fts3tokEofMethod, /* xEof */ + fts3tokColumnMethod, /* xColumn */ + fts3tokRowidMethod, /* xRowid */ + 0, /* xUpdate */ + 0, /* xBegin */ + 0, /* xSync */ + 0, /* xCommit */ + 0, /* xRollback */ + 0, /* xFindFunction */ + 0, /* xRename */ + 0, /* xSavepoint */ + 0, /* xRelease */ + 0 /* xRollbackTo */ + }; + int rc; /* Return code */ + + rc = sqlite3_create_module(db, "fts3tokenize", &fts3tok_module, (void*)pHash); + return rc; +} + +#endif /* !defined(SQLITE_CORE) || defined(SQLITE_ENABLE_FTS3) */ Index: ext/fts3/fts3_tokenizer.c ================================================================== --- ext/fts3/fts3_tokenizer.c +++ ext/fts3/fts3_tokenizer.c @@ -249,14 +249,14 @@ int nInput; const char *azArg[64]; const char *zToken; - int nToken; - int iStart; - int iEnd; - int iPos; + int nToken = 0; + int iStart = 0; + int iEnd = 0; + int iPos = 0; int i; Tcl_Obj *pRet; if( argc<2 ){ @@ -426,11 +426,11 @@ #endif /* ** Set up SQL objects in database db used to access the contents of ** the hash table pointed to by argument pHash. The hash table must -** been initialised to use string keys, and to take a private copy +** been initialized to use string keys, and to take a private copy ** of the key when a value is inserted. i.e. by a call similar to: ** ** sqlite3Fts3HashInit(pHash, FTS3_HASH_STRING, 1); ** ** This function adds a scalar function (see header comment above Index: ext/fts3/fts3_tokenizer.h ================================================================== --- ext/fts3/fts3_tokenizer.h +++ ext/fts3/fts3_tokenizer.h @@ -68,11 +68,11 @@ ** to the strings "arg1" and "arg2". ** ** This method should return either SQLITE_OK (0), or an SQLite error ** code. If SQLITE_OK is returned, then *ppTokenizer should be set ** to point at the newly created tokenizer structure. The generic - ** sqlite3_tokenizer.pModule variable should not be initialised by + ** sqlite3_tokenizer.pModule variable should not be initialized by ** this callback. The caller will do so. */ int (*xCreate)( int argc, /* Size of argv array */ const char *const*argv, /* Tokenizer argument strings */ Index: ext/fts3/fts3_unicode.c ================================================================== --- ext/fts3/fts3_unicode.c +++ ext/fts3/fts3_unicode.c @@ -123,11 +123,11 @@ ** the return value of sqlite3FtsUnicodeIsalnum() is inverted for all ** codepoints in the aiException[] array. ** ** If a standalone diacritic mark (one that sqlite3FtsUnicodeIsdiacritic() ** identifies as a diacritic) occurs in the zIn/nIn string it is ignored. -** It is not possible to change the behaviour of the tokenizer with respect +** It is not possible to change the behavior of the tokenizer with respect ** to these codepoints. */ static int unicodeAddExceptions( unicode_tokenizer *p, /* Tokenizer to add exceptions to */ int bAlnum, /* Replace Isalnum() return value with this */ Index: ext/fts3/fts3_unicode2.c ================================================================== --- ext/fts3/fts3_unicode2.c +++ ext/fts3/fts3_unicode2.c @@ -99,32 +99,31 @@ 0x02A3E003, 0x02A4980A, 0x02A51C0D, 0x02A57C01, 0x02A60004, 0x02A6CC1B, 0x02A77802, 0x02A8A40E, 0x02A90C01, 0x02A93002, 0x02A97004, 0x02A9DC03, 0x02A9EC01, 0x02AAC001, 0x02AAC803, 0x02AADC02, 0x02AAF802, 0x02AB0401, 0x02AB7802, 0x02ABAC07, 0x02ABD402, 0x02AF8C0B, 0x03600001, 0x036DFC02, 0x036FFC02, - 0x037FFC02, 0x03E3FC01, 0x03EC7801, 0x03ECA401, 0x03EEC810, - 0x03F4F802, 0x03F7F002, 0x03F8001A, 0x03F88007, 0x03F8C023, - 0x03F95013, 0x03F9A004, 0x03FBFC01, 0x03FC040F, 0x03FC6807, - 0x03FCEC06, 0x03FD6C0B, 0x03FF8007, 0x03FFA007, 0x03FFE405, - 0x04040003, 0x0404DC09, 0x0405E411, 0x0406400C, 0x0407402E, - 0x040E7C01, 0x040F4001, 0x04215C01, 0x04247C01, 0x0424FC01, - 0x04280403, 0x04281402, 0x04283004, 0x0428E003, 0x0428FC01, - 0x04294009, 0x0429FC01, 0x042CE407, 0x04400003, 0x0440E016, - 0x04420003, 0x0442C012, 0x04440003, 0x04449C0E, 0x04450004, - 0x04460003, 0x0446CC0E, 0x04471404, 0x045AAC0D, 0x0491C004, - 0x05BD442E, 0x05BE3C04, 0x074000F6, 0x07440027, 0x0744A4B5, - 0x07480046, 0x074C0057, 0x075B0401, 0x075B6C01, 0x075BEC01, - 0x075C5401, 0x075CD401, 0x075D3C01, 0x075DBC01, 0x075E2401, - 0x075EA401, 0x075F0C01, 0x07BBC002, 0x07C0002C, 0x07C0C064, - 0x07C2800F, 0x07C2C40E, 0x07C3040F, 0x07C3440F, 0x07C4401F, - 0x07C4C03C, 0x07C5C02B, 0x07C7981D, 0x07C8402B, 0x07C90009, - 0x07C94002, 0x07CC0021, 0x07CCC006, 0x07CCDC46, 0x07CE0014, - 0x07CE8025, 0x07CF1805, 0x07CF8011, 0x07D0003F, 0x07D10001, - 0x07D108B6, 0x07D3E404, 0x07D4003E, 0x07D50004, 0x07D54018, - 0x07D7EC46, 0x07D9140B, 0x07DA0046, 0x07DC0074, 0x38000401, - 0x38008060, 0x380400F0, 0x3C000001, 0x3FFFF401, 0x40000001, - 0x43FFF401, + 0x037FFC01, 0x03EC7801, 0x03ECA401, 0x03EEC810, 0x03F4F802, + 0x03F7F002, 0x03F8001A, 0x03F88007, 0x03F8C023, 0x03F95013, + 0x03F9A004, 0x03FBFC01, 0x03FC040F, 0x03FC6807, 0x03FCEC06, + 0x03FD6C0B, 0x03FF8007, 0x03FFA007, 0x03FFE405, 0x04040003, + 0x0404DC09, 0x0405E411, 0x0406400C, 0x0407402E, 0x040E7C01, + 0x040F4001, 0x04215C01, 0x04247C01, 0x0424FC01, 0x04280403, + 0x04281402, 0x04283004, 0x0428E003, 0x0428FC01, 0x04294009, + 0x0429FC01, 0x042CE407, 0x04400003, 0x0440E016, 0x04420003, + 0x0442C012, 0x04440003, 0x04449C0E, 0x04450004, 0x04460003, + 0x0446CC0E, 0x04471404, 0x045AAC0D, 0x0491C004, 0x05BD442E, + 0x05BE3C04, 0x074000F6, 0x07440027, 0x0744A4B5, 0x07480046, + 0x074C0057, 0x075B0401, 0x075B6C01, 0x075BEC01, 0x075C5401, + 0x075CD401, 0x075D3C01, 0x075DBC01, 0x075E2401, 0x075EA401, + 0x075F0C01, 0x07BBC002, 0x07C0002C, 0x07C0C064, 0x07C2800F, + 0x07C2C40E, 0x07C3040F, 0x07C3440F, 0x07C4401F, 0x07C4C03C, + 0x07C5C02B, 0x07C7981D, 0x07C8402B, 0x07C90009, 0x07C94002, + 0x07CC0021, 0x07CCC006, 0x07CCDC46, 0x07CE0014, 0x07CE8025, + 0x07CF1805, 0x07CF8011, 0x07D0003F, 0x07D10001, 0x07D108B6, + 0x07D3E404, 0x07D4003E, 0x07D50004, 0x07D54018, 0x07D7EC46, + 0x07D9140B, 0x07DA0046, 0x07DC0074, 0x38000401, 0x38008060, + 0x380400F0, }; static const unsigned int aAscii[4] = { 0xFFFFFFFF, 0xFC00FFFF, 0xF8000001, 0xF8000001, }; Index: ext/fts3/fts3_write.c ================================================================== --- ext/fts3/fts3_write.c +++ ext/fts3/fts3_write.c @@ -487,41 +487,34 @@ *pRC = rc; } /* -** This function ensures that the caller has obtained a shared-cache -** table-lock on the %_content table. This is required before reading -** data from the fts3 table. If this lock is not acquired first, then -** the caller may end up holding read-locks on the %_segments and %_segdir -** tables, but no read-lock on the %_content table. If this happens -** a second connection will be able to write to the fts3 table, but -** attempting to commit those writes might return SQLITE_LOCKED or -** SQLITE_LOCKED_SHAREDCACHE (because the commit attempts to obtain -** write-locks on the %_segments and %_segdir ** tables). -** -** We try to avoid this because if FTS3 returns any error when committing -** a transaction, the whole transaction will be rolled back. And this is -** not what users expect when they get SQLITE_LOCKED_SHAREDCACHE. It can -** still happen if the user reads data directly from the %_segments or -** %_segdir tables instead of going through FTS3 though. -** -** This reasoning does not apply to a content=xxx table. -*/ -int sqlite3Fts3ReadLock(Fts3Table *p){ - int rc; /* Return code */ - sqlite3_stmt *pStmt; /* Statement used to obtain lock */ - - if( p->zContentTbl==0 ){ - rc = fts3SqlStmt(p, SQL_SELECT_CONTENT_BY_ROWID, &pStmt, 0); +** This function ensures that the caller has obtained an exclusive +** shared-cache table-lock on the %_segdir table. This is required before +** writing data to the fts3 table. If this lock is not acquired first, then +** the caller may end up attempting to take this lock as part of committing +** a transaction, causing SQLite to return SQLITE_LOCKED or +** LOCKED_SHAREDCACHEto a COMMIT command. +** +** It is best to avoid this because if FTS3 returns any error when +** committing a transaction, the whole transaction will be rolled back. +** And this is not what users expect when they get SQLITE_LOCKED_SHAREDCACHE. +** It can still happen if the user locks the underlying tables directly +** instead of accessing them via FTS. +*/ +static int fts3Writelock(Fts3Table *p){ + int rc = SQLITE_OK; + + if( p->nPendingData==0 ){ + sqlite3_stmt *pStmt; + rc = fts3SqlStmt(p, SQL_DELETE_SEGDIR_LEVEL, &pStmt, 0); if( rc==SQLITE_OK ){ sqlite3_bind_null(pStmt, 1); sqlite3_step(pStmt); rc = sqlite3_reset(pStmt); } - }else{ - rc = SQLITE_OK; } return rc; } @@ -774,20 +767,20 @@ static int fts3PendingTermsAdd( Fts3Table *p, /* Table into which text will be inserted */ int iLangid, /* Language id to use */ const char *zText, /* Text of document to be inserted */ int iCol, /* Column into which text is being inserted */ - u32 *pnWord /* OUT: Number of tokens inserted */ + u32 *pnWord /* IN/OUT: Incr. by number tokens inserted */ ){ int rc; - int iStart; - int iEnd; - int iPos; + int iStart = 0; + int iEnd = 0; + int iPos = 0; int nWord = 0; char const *zToken; - int nToken; + int nToken = 0; sqlite3_tokenizer *pTokenizer = p->pTokenizer; sqlite3_tokenizer_module const *pModule = pTokenizer->pModule; sqlite3_tokenizer_cursor *pCsr; int (*xNext)(sqlite3_tokenizer_cursor *pCursor, @@ -838,11 +831,11 @@ ); } } pModule->xClose(pCsr); - *pnWord = nWord; + *pnWord += nWord; return (rc==SQLITE_DONE ? SQLITE_OK : rc); } /* ** Calling this function indicates that subsequent calls to @@ -905,16 +898,19 @@ sqlite3_value **apVal, u32 *aSz ){ int i; /* Iterator variable */ for(i=2; inColumn+2; i++){ - const char *zText = (const char *)sqlite3_value_text(apVal[i]); - int rc = fts3PendingTermsAdd(p, iLangid, zText, i-2, &aSz[i-2]); - if( rc!=SQLITE_OK ){ - return rc; + int iCol = i-2; + if( p->abNotindexed[iCol]==0 ){ + const char *zText = (const char *)sqlite3_value_text(apVal[i]); + int rc = fts3PendingTermsAdd(p, iLangid, zText, iCol, &aSz[iCol]); + if( rc!=SQLITE_OK ){ + return rc; + } + aSz[p->nColumn] += sqlite3_value_bytes(apVal[i]); } - aSz[p->nColumn] += sqlite3_value_bytes(apVal[i]); } return SQLITE_OK; } /* @@ -1042,32 +1038,38 @@ */ static void fts3DeleteTerms( int *pRC, /* Result code */ Fts3Table *p, /* The FTS table to delete from */ sqlite3_value *pRowid, /* The docid to be deleted */ - u32 *aSz /* Sizes of deleted document written here */ + u32 *aSz, /* Sizes of deleted document written here */ + int *pbFound /* OUT: Set to true if row really does exist */ ){ int rc; sqlite3_stmt *pSelect; + assert( *pbFound==0 ); if( *pRC ) return; rc = fts3SqlStmt(p, SQL_SELECT_CONTENT_BY_ROWID, &pSelect, &pRowid); if( rc==SQLITE_OK ){ if( SQLITE_ROW==sqlite3_step(pSelect) ){ int i; int iLangid = langidFromSelect(p, pSelect); rc = fts3PendingTermsDocid(p, iLangid, sqlite3_column_int64(pSelect, 0)); for(i=1; rc==SQLITE_OK && i<=p->nColumn; i++){ - const char *zText = (const char *)sqlite3_column_text(pSelect, i); - rc = fts3PendingTermsAdd(p, iLangid, zText, -1, &aSz[i-1]); - aSz[p->nColumn] += sqlite3_column_bytes(pSelect, i); + int iCol = i-1; + if( p->abNotindexed[iCol]==0 ){ + const char *zText = (const char *)sqlite3_column_text(pSelect, i); + rc = fts3PendingTermsAdd(p, iLangid, zText, -1, &aSz[iCol]); + aSz[p->nColumn] += sqlite3_column_bytes(pSelect, i); + } } if( rc!=SQLITE_OK ){ sqlite3_reset(pSelect); *pRC = rc; return; } + *pbFound = 1; } rc = sqlite3_reset(pSelect); }else{ sqlite3_reset(pSelect); } @@ -1340,12 +1342,12 @@ rc = fts3SegReaderRequire(pReader, pNext, FTS3_VARINT_MAX*2); if( rc!=SQLITE_OK ) return rc; /* Because of the FTS3_NODE_PADDING bytes of padding, the following is ** safe (no risk of overread) even if the node data is corrupted. */ - pNext += sqlite3Fts3GetVarint32(pNext, &nPrefix); - pNext += sqlite3Fts3GetVarint32(pNext, &nSuffix); + pNext += fts3GetVarint32(pNext, &nPrefix); + pNext += fts3GetVarint32(pNext, &nSuffix); if( nPrefix<0 || nSuffix<=0 || &pNext[nSuffix]>&pReader->aNode[pReader->nNode] ){ return FTS_CORRUPT_VTAB; } @@ -1364,11 +1366,11 @@ if( rc!=SQLITE_OK ) return rc; memcpy(&pReader->zTerm[nPrefix], pNext, nSuffix); pReader->nTerm = nPrefix+nSuffix; pNext += nSuffix; - pNext += sqlite3Fts3GetVarint32(pNext, &pReader->nDoclist); + pNext += fts3GetVarint32(pNext, &pReader->nDoclist); pReader->aDoclist = pNext; pReader->pOffsetList = 0; /* Check that the doclist does not appear to extend past the end of the ** b-tree node. And that the final byte of the doclist is 0x00. If either @@ -1457,11 +1459,11 @@ while( 1 ){ /* The following line of code (and the "p++" below the while() loop) is ** normally all that is required to move pointer p to the desired ** position. The exception is if this node is being loaded from disk - ** incrementally and pointer "p" now points to the first byte passed + ** incrementally and pointer "p" now points to the first byte past ** the populated part of pReader->aNode[]. */ while( *p | c ) c = *p++ & 0x80; assert( *p==0 ); @@ -1477,10 +1479,11 @@ if( ppOffsetList ){ *ppOffsetList = pReader->pOffsetList; *pnOffsetList = (int)(p - pReader->pOffsetList - 1); } + /* List may have been edited in place by fts3EvalNearTrim() */ while( papSegment, nMerge, j, xCmp); + + if( nList>0 && fts3SegReaderIsPending(apSegment[0]) ){ + rc = fts3MsrBufferData(pMsr, pList, nList+1); + if( rc!=SQLITE_OK ) return rc; + assert( (pMsr->aBuffer[nList] & 0xFE)==0x00 ); + pList = pMsr->aBuffer; + } if( pMsr->iColFilter>=0 ){ - fts3ColumnFilter(pMsr->iColFilter, &pList, &nList); + fts3ColumnFilter(pMsr->iColFilter, 1, &pList, &nList); } if( nList>0 ){ - if( fts3SegReaderIsPending(apSegment[0]) ){ - rc = fts3MsrBufferData(pMsr, pList, nList+1); - if( rc!=SQLITE_OK ) return rc; - *paPoslist = pMsr->aBuffer; - assert( (pMsr->aBuffer[nList] & 0xFE)==0x00 ); - }else{ - *paPoslist = pList; - } + *paPoslist = pList; *piDocid = iDocid; *pnPoslist = nList; break; } } @@ -2836,12 +2846,12 @@ fts3SegReaderFirstDocid(p, apSegment[i]); } fts3SegReaderSort(apSegment, nMerge, nMerge, xCmp); while( apSegment[0]->pOffsetList ){ int j; /* Number of segments that share a docid */ - char *pList; - int nList; + char *pList = 0; + int nList = 0; int nByte; sqlite3_int64 iDocid = apSegment[0]->iDocid; fts3SegReaderNextDocid(p, apSegment[0], &pList, &nList); j = 1; while( jiCol, &pList, &nList); + fts3ColumnFilter(pFilter->iCol, 0, &pList, &nList); } if( !isIgnoreEmpty || nList>0 ){ /* Calculate the 'docid' delta value to write into the merged @@ -2967,11 +2977,11 @@ rc = sqlite3Fts3SegReaderCursor(p, iLangid, iIndex, iLevel, 0, 0, 1, 0, &csr); if( rc!=SQLITE_OK || csr.nSegment==0 ) goto finished; if( iLevel==FTS3_SEGCURSOR_ALL ){ /* This call is to merge all segments in the database to a single - ** segment. The level of the new segment is equal to the the numerically + ** segment. The level of the new segment is equal to the numerically ** greatest segment level currently present in the database for this ** index. The idx of the new segment is always 0. */ if( csr.nSegment==1 ){ rc = SQLITE_DONE; goto finished; @@ -3288,15 +3298,17 @@ while( rc==SQLITE_OK && SQLITE_ROW==sqlite3_step(pStmt) ){ int iCol; int iLangid = langidFromSelect(p, pStmt); rc = fts3PendingTermsDocid(p, iLangid, sqlite3_column_int64(pStmt, 0)); - aSz[p->nColumn] = 0; + memset(aSz, 0, sizeof(aSz[0]) * (p->nColumn+1)); for(iCol=0; rc==SQLITE_OK && iColnColumn; iCol++){ - const char *z = (const char *) sqlite3_column_text(pStmt, iCol+1); - rc = fts3PendingTermsAdd(p, iLangid, z, iCol, &aSz[iCol]); - aSz[p->nColumn] += sqlite3_column_bytes(pStmt, iCol+1); + if( p->abNotindexed[iCol]==0 ){ + const char *z = (const char *) sqlite3_column_text(pStmt, iCol+1); + rc = fts3PendingTermsAdd(p, iLangid, z, iCol, &aSz[iCol]); + aSz[p->nColumn] += sqlite3_column_bytes(pStmt, iCol+1); + } } if( p->bHasDocsize ){ fts3InsertDocsize(&rc, p, aSz); } if( rc!=SQLITE_OK ){ @@ -3480,21 +3492,21 @@ if( p->iOff>=p->nNode ){ /* EOF */ p->aNode = 0; }else{ if( bFirst==0 ){ - p->iOff += sqlite3Fts3GetVarint32(&p->aNode[p->iOff], &nPrefix); + p->iOff += fts3GetVarint32(&p->aNode[p->iOff], &nPrefix); } - p->iOff += sqlite3Fts3GetVarint32(&p->aNode[p->iOff], &nSuffix); + p->iOff += fts3GetVarint32(&p->aNode[p->iOff], &nSuffix); blobGrowBuffer(&p->term, nPrefix+nSuffix, &rc); if( rc==SQLITE_OK ){ memcpy(&p->term.a[nPrefix], &p->aNode[p->iOff], nSuffix); p->term.n = nPrefix+nSuffix; p->iOff += nSuffix; if( p->iChild==0 ){ - p->iOff += sqlite3Fts3GetVarint32(&p->aNode[p->iOff], &p->nDoclist); + p->iOff += fts3GetVarint32(&p->aNode[p->iOff], &p->nDoclist); p->aDoclist = &p->aNode[p->iOff]; p->iOff += p->nDoclist; } } } @@ -3597,11 +3609,11 @@ memcpy(pNode->key.a, zTerm, nTerm); pNode->key.n = nTerm; } }else{ - /* Otherwise, flush the the current node of layer iLayer to disk. + /* Otherwise, flush the current node of layer iLayer to disk. ** Then allocate a new, empty sibling node. The key will be written ** into the parent of this node. */ rc = fts3WriteSegment(p, pNode->iBlock, pNode->block.a, pNode->block.n); assert( pNode->block.nAlloc>=p->nNodeSize ); @@ -4542,11 +4554,11 @@ while( i>0 && (pHint->a[i-1] & 0x80) ) i--; while( i>0 && (pHint->a[i-1] & 0x80) ) i--; pHint->n = i; i += sqlite3Fts3GetVarint(&pHint->a[i], piAbsLevel); - i += sqlite3Fts3GetVarint32(&pHint->a[i], pnInput); + i += fts3GetVarint32(&pHint->a[i], pnInput); if( i!=nHint ) return SQLITE_CORRUPT_VTAB; return SQLITE_OK; } @@ -4766,11 +4778,11 @@ assert( p->bFts4==0 ); sqlite3Fts3CreateStatTable(&rc, p); if( rc ) return rc; } rc = fts3SqlStmt(p, SQL_REPLACE_STAT, &pStmt, 0); - if( rc ) return rc;; + if( rc ) return rc; sqlite3_bind_int(pStmt, 1, FTS_STAT_AUTOINCRMERGE); sqlite3_bind_int(pStmt, 2, p->bAutoincrmerge); sqlite3_step(pStmt); rc = sqlite3_reset(pStmt); return rc; @@ -4932,13 +4944,13 @@ sqlite3_tokenizer_cursor *pT = 0; rc = sqlite3Fts3OpenTokenizer(p->pTokenizer, iLang, zText, nText, &pT); while( rc==SQLITE_OK ){ char const *zToken; /* Buffer containing token */ - int nToken; /* Number of bytes in token */ - int iDum1, iDum2; /* Dummy variables */ - int iPos; /* Position of token in zText */ + int nToken = 0; /* Number of bytes in token */ + int iDum1 = 0, iDum2 = 0; /* Dummy variables */ + int iPos = 0; /* Position of token in zText */ rc = pModule->xNext(pT, &zToken, &nToken, &iDum1, &iDum2, &iPos); if( rc==SQLITE_OK ){ int i; cksum2 = cksum2 ^ fts3ChecksumEntry( @@ -5036,10 +5048,13 @@ p->nNodeSize = atoi(&zVal[9]); rc = SQLITE_OK; }else if( nVal>11 && 0==sqlite3_strnicmp(zVal, "maxpending=", 9) ){ p->nMaxPendingData = atoi(&zVal[11]); rc = SQLITE_OK; + }else if( nVal>21 && 0==sqlite3_strnicmp(zVal, "test-no-incr-doclist=", 21) ){ + p->bNoIncrDoclist = atoi(&zVal[21]); + rc = SQLITE_OK; #endif }else{ rc = SQLITE_ERROR; } @@ -5095,36 +5110,38 @@ assert( pCsr->isRequireSeek==0 ); iDocid = sqlite3_column_int64(pCsr->pStmt, 0); for(i=0; inColumn && rc==SQLITE_OK; i++){ - const char *zText = (const char *)sqlite3_column_text(pCsr->pStmt, i+1); - sqlite3_tokenizer_cursor *pTC = 0; - - rc = sqlite3Fts3OpenTokenizer(pT, pCsr->iLangid, zText, -1, &pTC); - while( rc==SQLITE_OK ){ - char const *zToken; /* Buffer containing token */ - int nToken; /* Number of bytes in token */ - int iDum1, iDum2; /* Dummy variables */ - int iPos; /* Position of token in zText */ - - rc = pModule->xNext(pTC, &zToken, &nToken, &iDum1, &iDum2, &iPos); - for(pDef=pCsr->pDeferred; pDef && rc==SQLITE_OK; pDef=pDef->pNext){ - Fts3PhraseToken *pPT = pDef->pToken; - if( (pDef->iCol>=p->nColumn || pDef->iCol==i) - && (pPT->bFirst==0 || iPos==0) - && (pPT->n==nToken || (pPT->isPrefix && pPT->nz, pPT->n)) - ){ - fts3PendingListAppend(&pDef->pList, iDocid, i, iPos, &rc); + if( p->abNotindexed[i]==0 ){ + const char *zText = (const char *)sqlite3_column_text(pCsr->pStmt, i+1); + sqlite3_tokenizer_cursor *pTC = 0; + + rc = sqlite3Fts3OpenTokenizer(pT, pCsr->iLangid, zText, -1, &pTC); + while( rc==SQLITE_OK ){ + char const *zToken; /* Buffer containing token */ + int nToken = 0; /* Number of bytes in token */ + int iDum1 = 0, iDum2 = 0; /* Dummy variables */ + int iPos = 0; /* Position of token in zText */ + + rc = pModule->xNext(pTC, &zToken, &nToken, &iDum1, &iDum2, &iPos); + for(pDef=pCsr->pDeferred; pDef && rc==SQLITE_OK; pDef=pDef->pNext){ + Fts3PhraseToken *pPT = pDef->pToken; + if( (pDef->iCol>=p->nColumn || pDef->iCol==i) + && (pPT->bFirst==0 || iPos==0) + && (pPT->n==nToken || (pPT->isPrefix && pPT->nz, pPT->n)) + ){ + fts3PendingListAppend(&pDef->pList, iDocid, i, iPos, &rc); + } } } + if( pTC ) pModule->xClose(pTC); + if( rc==SQLITE_DONE ) rc = SQLITE_OK; } - if( pTC ) pModule->xClose(pTC); - if( rc==SQLITE_DONE ) rc = SQLITE_OK; } - + for(pDef=pCsr->pDeferred; pDef && rc==SQLITE_OK; pDef=pDef->pNext){ if( pDef->pList ){ rc = fts3PendingListAppendVarint(&pDef->pList, 0); } } @@ -5192,32 +5209,36 @@ ** of subsiduary data structures accordingly. */ static int fts3DeleteByRowid( Fts3Table *p, sqlite3_value *pRowid, - int *pnDoc, + int *pnChng, /* IN/OUT: Decrement if row is deleted */ u32 *aSzDel ){ - int isEmpty = 0; - int rc = fts3IsEmpty(p, pRowid, &isEmpty); - if( rc==SQLITE_OK ){ - if( isEmpty ){ - /* Deleting this row means the whole table is empty. In this case - ** delete the contents of all three tables and throw away any - ** data in the pendingTerms hash table. */ - rc = fts3DeleteAll(p, 1); - *pnDoc = *pnDoc - 1; - }else{ - fts3DeleteTerms(&rc, p, pRowid, aSzDel); - if( p->zContentTbl==0 ){ - fts3SqlExec(&rc, p, SQL_DELETE_CONTENT, &pRowid); - if( sqlite3_changes(p->db) ) *pnDoc = *pnDoc - 1; + int rc = SQLITE_OK; /* Return code */ + int bFound = 0; /* True if *pRowid really is in the table */ + + fts3DeleteTerms(&rc, p, pRowid, aSzDel, &bFound); + if( bFound && rc==SQLITE_OK ){ + int isEmpty = 0; /* Deleting *pRowid leaves the table empty */ + rc = fts3IsEmpty(p, pRowid, &isEmpty); + if( rc==SQLITE_OK ){ + if( isEmpty ){ + /* Deleting this row means the whole table is empty. In this case + ** delete the contents of all three tables and throw away any + ** data in the pendingTerms hash table. */ + rc = fts3DeleteAll(p, 1); + *pnChng = 0; + memset(aSzDel, 0, sizeof(u32) * (p->nColumn+1) * 2); }else{ - *pnDoc = *pnDoc - 1; - } - if( p->bHasDocsize ){ - fts3SqlExec(&rc, p, SQL_DELETE_DOCSIZE, &pRowid); + *pnChng = *pnChng - 1; + if( p->zContentTbl==0 ){ + fts3SqlExec(&rc, p, SQL_DELETE_CONTENT, &pRowid); + } + if( p->bHasDocsize ){ + fts3SqlExec(&rc, p, SQL_DELETE_DOCSIZE, &pRowid); + } } } } return rc; @@ -5244,13 +5265,17 @@ ){ Fts3Table *p = (Fts3Table *)pVtab; int rc = SQLITE_OK; /* Return Code */ int isRemove = 0; /* True for an UPDATE or DELETE */ u32 *aSzIns = 0; /* Sizes of inserted documents */ - u32 *aSzDel; /* Sizes of deleted documents */ + u32 *aSzDel = 0; /* Sizes of deleted documents */ int nChng = 0; /* Net change in number of documents */ int bInsertDone = 0; + + /* At this point it must be known if the %_stat table exists or not. + ** So bHasStat may not be 2. */ + assert( p->bHasStat==0 || p->bHasStat==1 ); assert( p->pSegments==0 ); assert( nArg==1 /* DELETE operations */ || nArg==(2 + p->nColumn + 3) /* INSERT or UPDATE operations */ @@ -5272,17 +5297,20 @@ rc = SQLITE_CONSTRAINT; goto update_out; } /* Allocate space to hold the change in document sizes */ - aSzIns = sqlite3_malloc( sizeof(aSzIns[0])*(p->nColumn+1)*2 ); - if( aSzIns==0 ){ + aSzDel = sqlite3_malloc( sizeof(aSzDel[0])*(p->nColumn+1)*2 ); + if( aSzDel==0 ){ rc = SQLITE_NOMEM; goto update_out; } - aSzDel = &aSzIns[p->nColumn+1]; - memset(aSzIns, 0, sizeof(aSzIns[0])*(p->nColumn+1)*2); + aSzIns = &aSzDel[p->nColumn+1]; + memset(aSzDel, 0, sizeof(aSzDel[0])*(p->nColumn+1)*2); + + rc = fts3Writelock(p); + if( rc!=SQLITE_OK ) goto update_out; /* If this is an INSERT operation, or an UPDATE that modifies the rowid ** value, then this operation requires constraint handling. ** ** If the on-conflict mode is REPLACE, this means that the existing row @@ -5363,11 +5391,11 @@ if( p->bFts4 ){ fts3UpdateDocTotals(&rc, p, aSzIns, aSzDel, nChng); } update_out: - sqlite3_free(aSzIns); + sqlite3_free(aSzDel); sqlite3Fts3SegmentsClose(p); return rc; } /* Index: ext/fts3/unicode/mkunicode.tcl ================================================================== --- ext/fts3/unicode/mkunicode.tcl +++ ext/fts3/unicode/mkunicode.tcl @@ -237,11 +237,14 @@ set fields [split $line ";"] if {[llength $fields] != [llength $lField]} { error "parse error: $line" } foreach $lField $fields {} set iCode [expr "0x$code"] - set bAlnum [expr {[lsearch {L N} [string range $general_category 0 0]]>=0}] + set bAlnum [expr { + [lsearch {L N} [string range $general_category 0 0]] >= 0 + || $general_category=="Co" + }] if { !$bAlnum } { lappend lRet $iCode } } close $fd @@ -358,11 +361,11 @@ iHi = iTest-1; } } assert( aEntry[0]=aEntry[iRes] ); - return (c >= ((aEntry[iRes]>>10) + (aEntry[iRes]&0x3FF))); + return (((unsigned int)c) >= ((aEntry[iRes]>>10) + (aEntry[iRes]&0x3FF))); } return 1;} puts "\}" } @@ -727,11 +730,11 @@ /* ** DO NOT EDIT THIS MACHINE GENERATED FILE. */ }] puts "" - puts "#if !defined(SQLITE_DISABLE_FTS3_UNICODE)" + puts "#if defined(SQLITE_ENABLE_FTS4_UNICODE61)" puts "#if defined(SQLITE_ENABLE_FTS3) || defined(SQLITE_ENABLE_FTS4)" puts "" puts "#include " puts "" } @@ -803,6 +806,6 @@ print_fold_test sqlite3FtsUnicodeFold $mappings print_test_main } puts "#endif /* defined(SQLITE_ENABLE_FTS3) || defined(SQLITE_ENABLE_FTS4) */" -puts "#endif /* !defined(SQLITE_DISABLE_FTS3_UNICODE) */" +puts "#endif /* !defined(SQLITE_ENABLE_FTS4_UNICODE61) */" Index: ext/icu/README.txt ================================================================== --- ext/icu/README.txt +++ ext/icu/README.txt @@ -96,11 +96,11 @@ in SQLite documentation: REGEXP This extension uses the ICU defaults for regular expression matching - behaviour. Specifically, this means that: + behavior. Specifically, this means that: * Matching is case-sensitive, * Regular expression comments are not allowed within patterns, and * The '^' and '$' characters match the beginning and end of the argument, not the beginning and end of lines within Index: ext/icu/icu.c ================================================================== --- ext/icu/icu.c +++ ext/icu/icu.c @@ -20,11 +20,11 @@ ** operator) using the ICU uregex_XX() APIs. ** ** * Implementations of the SQL scalar upper() and lower() functions ** for case mapping. ** -** * Integration of ICU and SQLite collation seqences. +** * Integration of ICU and SQLite collation sequences. ** ** * An implementation of the LIKE operator that uses ICU to ** provide case-independent matching. */ @@ -486,11 +486,14 @@ return rc; } #if !SQLITE_CORE -int sqlite3_extension_init( +#ifdef _WIN32 +__declspec(dllexport) +#endif +int sqlite3_icu_init( sqlite3 *db, char **pzErrMsg, const sqlite3_api_routines *pApi ){ SQLITE_EXTENSION_INIT2(pApi) ADDED ext/misc/amatch.c Index: ext/misc/amatch.c ================================================================== --- ext/misc/amatch.c +++ ext/misc/amatch.c @@ -0,0 +1,1487 @@ +/* +** 2013-03-14 +** +** The author disclaims copyright to this source code. In place of +** a legal notice, here is a blessing: +** +** May you do good and not evil. +** May you find forgiveness for yourself and forgive others. +** May you share freely, never taking more than you give. +** +************************************************************************* +** +** This file contains code for a demonstration virtual table that finds +** "approximate matches" - strings from a finite set that are nearly the +** same as a single input string. The virtual table is called "amatch". +** +** A amatch virtual table is created like this: +** +** CREATE VIRTUAL TABLE f USING approximate_match( +** vocabulary_table=, -- V +** vocabulary_word=, -- W +** vocabulary_language=, -- L +** edit_distances= +** ); +** +** When it is created, the new amatch table must be supplied with the +** the name of a table V and columns V.W and V.L such that +** +** SELECT W FROM V WHERE L=$language +** +** returns the allowed vocabulary for the match. If the "vocabulary_language" +** or L columnname is left unspecified or is an empty string, then no +** filtering of the vocabulary by language is performed. +** +** For efficiency, it is essential that the vocabulary table be indexed: +** +** CREATE vocab_index ON V(W) +** +** A separate edit-cost-table provides scoring information that defines +** what it means for one string to be "close" to another. +** +** The edit-cost-table must contain exactly four columns (more precisely, +** the statement "SELECT * FROM " must return records +** that consist of four columns). It does not matter what the columns are +** named. +** +** Each row in the edit-cost-table represents a single character +** transformation going from user input to the vocabulary. The leftmost +** column of the row (column 0) contains an integer identifier of the +** language to which the transformation rule belongs (see "MULTIPLE LANGUAGES" +** below). The second column of the row (column 1) contains the input +** character or characters - the characters of user input. The third +** column contains characters as they appear in the vocabulary table. +** And the fourth column contains the integer cost of making the +** transformation. For example: +** +** CREATE TABLE f_data(iLang, cFrom, cTo, Cost); +** INSERT INTO f_data(iLang, cFrom, cTo, Cost) VALUES(0, '', 'a', 100); +** INSERT INTO f_data(iLang, cFrom, cTo, Cost) VALUES(0, 'b', '', 87); +** INSERT INTO f_data(iLang, cFrom, cTo, Cost) VALUES(0, 'o', 'oe', 38); +** INSERT INTO f_data(iLang, cFrom, cTo, Cost) VALUES(0, 'oe', 'o', 40); +** +** The first row inserted into the edit-cost-table by the SQL script +** above indicates that the cost of having an extra 'a' in the vocabulary +** table that is missing in the user input 100. (All costs are integers. +** Overall cost must not exceed 16777216.) The second INSERT statement +** creates a rule saying that the cost of having a single letter 'b' in +** user input which is missing in the vocabulary table is 87. The third +** INSERT statement mean that the cost of matching an 'o' in user input +** against an 'oe' in the vocabulary table is 38. And so forth. +** +** The following rules are special: +** +** INSERT INTO f_data(iLang, cFrom, cTo, Cost) VALUES(0, '?', '', 97); +** INSERT INTO f_data(iLang, cFrom, cTo, Cost) VALUES(0, '', '?', 98); +** INSERT INTO f_data(iLang, cFrom, cTo, Cost) VALUES(0, '?', '?', 99); +** +** The '?' to '' rule is the cost of having any single character in the input +** that is not found in the vocabular. The '' to '?' rule is the cost of +** having a character in the vocabulary table that is missing from input. +** And the '?' to '?' rule is the cost of doing an arbitrary character +** substitution. These three generic rules apply across all languages. +** In other words, the iLang field is ignored for the generic substitution +** rules. If more than one cost is given for a generic substitution rule, +** then the lowest cost is used. +** +** Once it has been created, the amatch virtual table can be queried +** as follows: +** +** SELECT word, distance FROM f +** WHERE word MATCH 'abcdefg' +** AND distance<200; +** +** This query outputs the strings contained in the T(F) field that +** are close to "abcdefg" and in order of increasing distance. No string +** is output more than once. If there are multiple ways to transform the +** target string ("abcdefg") into a string in the vocabulary table then +** the lowest cost transform is the one that is returned. In this example, +** the search is limited to strings with a total distance of less than 200. +** +** For efficiency, it is important to put tight bounds on the distance. +** The time and memory space needed to perform this query is exponential +** in the maximum distance. A good rule of thumb is to limit the distance +** to no more than 1.5 or 2 times the maximum cost of any rule in the +** edit-cost-table. +** +** The amatch is a read-only table. Any attempt to DELETE, INSERT, or +** UPDATE on a amatch table will throw an error. +** +** It is important to put some kind of a limit on the amatch output. This +** can be either in the form of a LIMIT clause at the end of the query, +** or better, a "distance +#include +#include +#include +#include + +#ifndef SQLITE_OMIT_VIRTUALTABLE + +/* +** Forward declaration of objects used by this implementation +*/ +typedef struct amatch_vtab amatch_vtab; +typedef struct amatch_cursor amatch_cursor; +typedef struct amatch_rule amatch_rule; +typedef struct amatch_word amatch_word; +typedef struct amatch_avl amatch_avl; + + +/***************************************************************************** +** AVL Tree implementation +*/ +/* +** Objects that want to be members of the AVL tree should embedded an +** instance of this structure. +*/ +struct amatch_avl { + amatch_word *pWord; /* Points to the object being stored in the tree */ + char *zKey; /* Key. zero-terminated string. Must be unique */ + amatch_avl *pBefore; /* Other elements less than zKey */ + amatch_avl *pAfter; /* Other elements greater than zKey */ + amatch_avl *pUp; /* Parent element */ + short int height; /* Height of this node. Leaf==1 */ + short int imbalance; /* Height difference between pBefore and pAfter */ +}; + +/* Recompute the amatch_avl.height and amatch_avl.imbalance fields for p. +** Assume that the children of p have correct heights. +*/ +static void amatchAvlRecomputeHeight(amatch_avl *p){ + short int hBefore = p->pBefore ? p->pBefore->height : 0; + short int hAfter = p->pAfter ? p->pAfter->height : 0; + p->imbalance = hBefore - hAfter; /* -: pAfter higher. +: pBefore higher */ + p->height = (hBefore>hAfter ? hBefore : hAfter)+1; +} + +/* +** P B +** / \ / \ +** B Z ==> X P +** / \ / \ +** X Y Y Z +** +*/ +static amatch_avl *amatchAvlRotateBefore(amatch_avl *pP){ + amatch_avl *pB = pP->pBefore; + amatch_avl *pY = pB->pAfter; + pB->pUp = pP->pUp; + pB->pAfter = pP; + pP->pUp = pB; + pP->pBefore = pY; + if( pY ) pY->pUp = pP; + amatchAvlRecomputeHeight(pP); + amatchAvlRecomputeHeight(pB); + return pB; +} + +/* +** P A +** / \ / \ +** X A ==> P Z +** / \ / \ +** Y Z X Y +** +*/ +static amatch_avl *amatchAvlRotateAfter(amatch_avl *pP){ + amatch_avl *pA = pP->pAfter; + amatch_avl *pY = pA->pBefore; + pA->pUp = pP->pUp; + pA->pBefore = pP; + pP->pUp = pA; + pP->pAfter = pY; + if( pY ) pY->pUp = pP; + amatchAvlRecomputeHeight(pP); + amatchAvlRecomputeHeight(pA); + return pA; +} + +/* +** Return a pointer to the pBefore or pAfter pointer in the parent +** of p that points to p. Or if p is the root node, return pp. +*/ +static amatch_avl **amatchAvlFromPtr(amatch_avl *p, amatch_avl **pp){ + amatch_avl *pUp = p->pUp; + if( pUp==0 ) return pp; + if( pUp->pAfter==p ) return &pUp->pAfter; + return &pUp->pBefore; +} + +/* +** Rebalance all nodes starting with p and working up to the root. +** Return the new root. +*/ +static amatch_avl *amatchAvlBalance(amatch_avl *p){ + amatch_avl *pTop = p; + amatch_avl **pp; + while( p ){ + amatchAvlRecomputeHeight(p); + if( p->imbalance>=2 ){ + amatch_avl *pB = p->pBefore; + if( pB->imbalance<0 ) p->pBefore = amatchAvlRotateAfter(pB); + pp = amatchAvlFromPtr(p,&p); + p = *pp = amatchAvlRotateBefore(p); + }else if( p->imbalance<=(-2) ){ + amatch_avl *pA = p->pAfter; + if( pA->imbalance>0 ) p->pAfter = amatchAvlRotateBefore(pA); + pp = amatchAvlFromPtr(p,&p); + p = *pp = amatchAvlRotateAfter(p); + } + pTop = p; + p = p->pUp; + } + return pTop; +} + +/* Search the tree rooted at p for an entry with zKey. Return a pointer +** to the entry or return NULL. +*/ +static amatch_avl *amatchAvlSearch(amatch_avl *p, const char *zKey){ + int c; + while( p && (c = strcmp(zKey, p->zKey))!=0 ){ + p = (c<0) ? p->pBefore : p->pAfter; + } + return p; +} + +/* Find the first node (the one with the smallest key). +*/ +static amatch_avl *amatchAvlFirst(amatch_avl *p){ + if( p ) while( p->pBefore ) p = p->pBefore; + return p; +} + +#if 0 /* NOT USED */ +/* Return the node with the next larger key after p. +*/ +static amatch_avl *amatchAvlNext(amatch_avl *p){ + amatch_avl *pPrev = 0; + while( p && p->pAfter==pPrev ){ + pPrev = p; + p = p->pUp; + } + if( p && pPrev==0 ){ + p = amatchAvlFirst(p->pAfter); + } + return p; +} +#endif + +#if 0 /* NOT USED */ +/* Verify AVL tree integrity +*/ +static int amatchAvlIntegrity(amatch_avl *pHead){ + amatch_avl *p; + if( pHead==0 ) return 1; + if( (p = pHead->pBefore)!=0 ){ + assert( p->pUp==pHead ); + assert( amatchAvlIntegrity(p) ); + assert( strcmp(p->zKey, pHead->zKey)<0 ); + while( p->pAfter ) p = p->pAfter; + assert( strcmp(p->zKey, pHead->zKey)<0 ); + } + if( (p = pHead->pAfter)!=0 ){ + assert( p->pUp==pHead ); + assert( amatchAvlIntegrity(p) ); + assert( strcmp(p->zKey, pHead->zKey)>0 ); + p = amatchAvlFirst(p); + assert( strcmp(p->zKey, pHead->zKey)>0 ); + } + return 1; +} +static int amatchAvlIntegrity2(amatch_avl *pHead){ + amatch_avl *p, *pNext; + for(p=amatchAvlFirst(pHead); p; p=pNext){ + pNext = amatchAvlNext(p); + if( pNext==0 ) break; + assert( strcmp(p->zKey, pNext->zKey)<0 ); + } + return 1; +} +#endif + +/* Insert a new node pNew. Return NULL on success. If the key is not +** unique, then do not perform the insert but instead leave pNew unchanged +** and return a pointer to an existing node with the same key. +*/ +static amatch_avl *amatchAvlInsert(amatch_avl **ppHead, amatch_avl *pNew){ + int c; + amatch_avl *p = *ppHead; + if( p==0 ){ + p = pNew; + pNew->pUp = 0; + }else{ + while( p ){ + c = strcmp(pNew->zKey, p->zKey); + if( c<0 ){ + if( p->pBefore ){ + p = p->pBefore; + }else{ + p->pBefore = pNew; + pNew->pUp = p; + break; + } + }else if( c>0 ){ + if( p->pAfter ){ + p = p->pAfter; + }else{ + p->pAfter = pNew; + pNew->pUp = p; + break; + } + }else{ + return p; + } + } + } + pNew->pBefore = 0; + pNew->pAfter = 0; + pNew->height = 1; + pNew->imbalance = 0; + *ppHead = amatchAvlBalance(p); + /* assert( amatchAvlIntegrity(*ppHead) ); */ + /* assert( amatchAvlIntegrity2(*ppHead) ); */ + return 0; +} + +/* Remove node pOld from the tree. pOld must be an element of the tree or +** the AVL tree will become corrupt. +*/ +static void amatchAvlRemove(amatch_avl **ppHead, amatch_avl *pOld){ + amatch_avl **ppParent; + amatch_avl *pBalance; + /* assert( amatchAvlSearch(*ppHead, pOld->zKey)==pOld ); */ + ppParent = amatchAvlFromPtr(pOld, ppHead); + if( pOld->pBefore==0 && pOld->pAfter==0 ){ + *ppParent = 0; + pBalance = pOld->pUp; + }else if( pOld->pBefore && pOld->pAfter ){ + amatch_avl *pX, *pY; + pX = amatchAvlFirst(pOld->pAfter); + *amatchAvlFromPtr(pX, 0) = pX->pAfter; + if( pX->pAfter ) pX->pAfter->pUp = pX->pUp; + pBalance = pX->pUp; + pX->pAfter = pOld->pAfter; + if( pX->pAfter ){ + pX->pAfter->pUp = pX; + }else{ + assert( pBalance==pOld ); + pBalance = pX; + } + pX->pBefore = pY = pOld->pBefore; + if( pY ) pY->pUp = pX; + pX->pUp = pOld->pUp; + *ppParent = pX; + }else if( pOld->pBefore==0 ){ + *ppParent = pBalance = pOld->pAfter; + pBalance->pUp = pOld->pUp; + }else if( pOld->pAfter==0 ){ + *ppParent = pBalance = pOld->pBefore; + pBalance->pUp = pOld->pUp; + } + *ppHead = amatchAvlBalance(pBalance); + pOld->pUp = 0; + pOld->pBefore = 0; + pOld->pAfter = 0; + /* assert( amatchAvlIntegrity(*ppHead) ); */ + /* assert( amatchAvlIntegrity2(*ppHead) ); */ +} +/* +** End of the AVL Tree implementation +******************************************************************************/ + + +/* +** Various types. +** +** amatch_cost is the "cost" of an edit operation. +** +** amatch_len is the length of a matching string. +** +** amatch_langid is an ruleset identifier. +*/ +typedef int amatch_cost; +typedef signed char amatch_len; +typedef int amatch_langid; + +/* +** Limits +*/ +#define AMATCH_MX_LENGTH 50 /* Maximum length of a rule string */ +#define AMATCH_MX_LANGID 2147483647 /* Maximum rule ID */ +#define AMATCH_MX_COST 1000 /* Maximum single-rule cost */ + +/* +** A match or partial match +*/ +struct amatch_word { + amatch_word *pNext; /* Next on a list of all amatch_words */ + amatch_avl sCost; /* Linkage of this node into the cost tree */ + amatch_avl sWord; /* Linkage of this node into the word tree */ + amatch_cost rCost; /* Cost of the match so far */ + int iSeq; /* Sequence number */ + char zCost[10]; /* Cost key (text rendering of rCost) */ + short int nMatch; /* Input characters matched */ + char zWord[4]; /* Text of the word. Extra space appended as needed */ +}; + +/* +** Each transformation rule is stored as an instance of this object. +** All rules are kept on a linked list sorted by rCost. +*/ +struct amatch_rule { + amatch_rule *pNext; /* Next rule in order of increasing rCost */ + char *zFrom; /* Transform from (a string from user input) */ + amatch_cost rCost; /* Cost of this transformation */ + amatch_langid iLang; /* The langauge to which this rule belongs */ + amatch_len nFrom, nTo; /* Length of the zFrom and zTo strings */ + char zTo[4]; /* Tranform to V.W value (extra space appended) */ +}; + +/* +** A amatch virtual-table object +*/ +struct amatch_vtab { + sqlite3_vtab base; /* Base class - must be first */ + char *zClassName; /* Name of this class. Default: "amatch" */ + char *zDb; /* Name of database. (ex: "main") */ + char *zSelf; /* Name of this virtual table */ + char *zCostTab; /* Name of edit-cost-table */ + char *zVocabTab; /* Name of vocabulary table */ + char *zVocabWord; /* Name of vocabulary table word column */ + char *zVocabLang; /* Name of vocabulary table language column */ + amatch_rule *pRule; /* All active rules in this amatch */ + amatch_cost rIns; /* Generic insertion cost '' -> ? */ + amatch_cost rDel; /* Generic deletion cost ? -> '' */ + amatch_cost rSub; /* Generic substitution cost ? -> ? */ + sqlite3 *db; /* The database connection */ + sqlite3_stmt *pVCheck; /* Query to check zVocabTab */ + int nCursor; /* Number of active cursors */ +}; + +/* A amatch cursor object */ +struct amatch_cursor { + sqlite3_vtab_cursor base; /* Base class - must be first */ + sqlite3_int64 iRowid; /* The rowid of the current word */ + amatch_langid iLang; /* Use this language ID */ + amatch_cost rLimit; /* Maximum cost of any term */ + int nBuf; /* Space allocated for zBuf */ + int oomErr; /* True following an OOM error */ + int nWord; /* Number of amatch_word objects */ + char *zBuf; /* Temp-use buffer space */ + char *zInput; /* Input word to match against */ + amatch_vtab *pVtab; /* The virtual table this cursor belongs to */ + amatch_word *pAllWords; /* List of all amatch_word objects */ + amatch_word *pCurrent; /* Most recent solution */ + amatch_avl *pCost; /* amatch_word objects keyed by iCost */ + amatch_avl *pWord; /* amatch_word objects keyed by zWord */ +}; + +/* +** The two input rule lists are both sorted in order of increasing +** cost. Merge them together into a single list, sorted by cost, and +** return a pointer to the head of that list. +*/ +static amatch_rule *amatchMergeRules(amatch_rule *pA, amatch_rule *pB){ + amatch_rule head; + amatch_rule *pTail; + + pTail = &head; + while( pA && pB ){ + if( pA->rCost<=pB->rCost ){ + pTail->pNext = pA; + pTail = pA; + pA = pA->pNext; + }else{ + pTail->pNext = pB; + pTail = pB; + pB = pB->pNext; + } + } + if( pA==0 ){ + pTail->pNext = pB; + }else{ + pTail->pNext = pA; + } + return head.pNext; +} + +/* +** Statement pStmt currently points to a row in the amatch data table. This +** function allocates and populates a amatch_rule structure according to +** the content of the row. +** +** If successful, *ppRule is set to point to the new object and SQLITE_OK +** is returned. Otherwise, *ppRule is zeroed, *pzErr may be set to point +** to an error message and an SQLite error code returned. +*/ +static int amatchLoadOneRule( + amatch_vtab *p, /* Fuzzer virtual table handle */ + sqlite3_stmt *pStmt, /* Base rule on statements current row */ + amatch_rule **ppRule, /* OUT: New rule object */ + char **pzErr /* OUT: Error message */ +){ + sqlite3_int64 iLang = sqlite3_column_int64(pStmt, 0); + const char *zFrom = (const char *)sqlite3_column_text(pStmt, 1); + const char *zTo = (const char *)sqlite3_column_text(pStmt, 2); + amatch_cost rCost = sqlite3_column_int(pStmt, 3); + + int rc = SQLITE_OK; /* Return code */ + int nFrom; /* Size of string zFrom, in bytes */ + int nTo; /* Size of string zTo, in bytes */ + amatch_rule *pRule = 0; /* New rule object to return */ + + if( zFrom==0 ) zFrom = ""; + if( zTo==0 ) zTo = ""; + nFrom = (int)strlen(zFrom); + nTo = (int)strlen(zTo); + + /* Silently ignore null transformations */ + if( strcmp(zFrom, zTo)==0 ){ + if( zFrom[0]=='?' && zFrom[1]==0 ){ + if( p->rSub==0 || p->rSub>rCost ) p->rSub = rCost; + } + *ppRule = 0; + return SQLITE_OK; + } + + if( rCost<=0 || rCost>AMATCH_MX_COST ){ + *pzErr = sqlite3_mprintf("%s: cost must be between 1 and %d", + p->zClassName, AMATCH_MX_COST + ); + rc = SQLITE_ERROR; + }else + if( nFrom>AMATCH_MX_LENGTH || nTo>AMATCH_MX_LENGTH ){ + *pzErr = sqlite3_mprintf("%s: maximum string length is %d", + p->zClassName, AMATCH_MX_LENGTH + ); + rc = SQLITE_ERROR; + }else + if( iLang<0 || iLang>AMATCH_MX_LANGID ){ + *pzErr = sqlite3_mprintf("%s: iLang must be between 0 and %d", + p->zClassName, AMATCH_MX_LANGID + ); + rc = SQLITE_ERROR; + }else + if( strcmp(zFrom,"")==0 && strcmp(zTo,"?")==0 ){ + if( p->rIns==0 || p->rIns>rCost ) p->rIns = rCost; + }else + if( strcmp(zFrom,"?")==0 && strcmp(zTo,"")==0 ){ + if( p->rDel==0 || p->rDel>rCost ) p->rDel = rCost; + }else + { + pRule = sqlite3_malloc( sizeof(*pRule) + nFrom + nTo ); + if( pRule==0 ){ + rc = SQLITE_NOMEM; + }else{ + memset(pRule, 0, sizeof(*pRule)); + pRule->zFrom = &pRule->zTo[nTo+1]; + pRule->nFrom = nFrom; + memcpy(pRule->zFrom, zFrom, nFrom+1); + memcpy(pRule->zTo, zTo, nTo+1); + pRule->nTo = nTo; + pRule->rCost = rCost; + pRule->iLang = (int)iLang; + } + } + + *ppRule = pRule; + return rc; +} + +/* +** Free all the content in the edit-cost-table +*/ +static void amatchFreeRules(amatch_vtab *p){ + while( p->pRule ){ + amatch_rule *pRule = p->pRule; + p->pRule = pRule->pNext; + sqlite3_free(pRule); + } + p->pRule = 0; +} + +/* +** Load the content of the amatch data table into memory. +*/ +static int amatchLoadRules( + sqlite3 *db, /* Database handle */ + amatch_vtab *p, /* Virtual amatch table to configure */ + char **pzErr /* OUT: Error message */ +){ + int rc = SQLITE_OK; /* Return code */ + char *zSql; /* SELECT used to read from rules table */ + amatch_rule *pHead = 0; + + zSql = sqlite3_mprintf("SELECT * FROM %Q.%Q", p->zDb, p->zCostTab); + if( zSql==0 ){ + rc = SQLITE_NOMEM; + }else{ + int rc2; /* finalize() return code */ + sqlite3_stmt *pStmt = 0; + rc = sqlite3_prepare_v2(db, zSql, -1, &pStmt, 0); + if( rc!=SQLITE_OK ){ + *pzErr = sqlite3_mprintf("%s: %s", p->zClassName, sqlite3_errmsg(db)); + }else if( sqlite3_column_count(pStmt)!=4 ){ + *pzErr = sqlite3_mprintf("%s: %s has %d columns, expected 4", + p->zClassName, p->zCostTab, sqlite3_column_count(pStmt) + ); + rc = SQLITE_ERROR; + }else{ + while( rc==SQLITE_OK && SQLITE_ROW==sqlite3_step(pStmt) ){ + amatch_rule *pRule = 0; + rc = amatchLoadOneRule(p, pStmt, &pRule, pzErr); + if( pRule ){ + pRule->pNext = pHead; + pHead = pRule; + } + } + } + rc2 = sqlite3_finalize(pStmt); + if( rc==SQLITE_OK ) rc = rc2; + } + sqlite3_free(zSql); + + /* All rules are now in a singly linked list starting at pHead. This + ** block sorts them by cost and then sets amatch_vtab.pRule to point to + ** point to the head of the sorted list. + */ + if( rc==SQLITE_OK ){ + unsigned int i; + amatch_rule *pX; + amatch_rule *a[15]; + for(i=0; ipNext; + pX->pNext = 0; + for(i=0; a[i] && ipRule = amatchMergeRules(p->pRule, pX); + }else{ + /* An error has occurred. Setting p->pRule to point to the head of the + ** allocated list ensures that the list will be cleaned up in this case. + */ + assert( p->pRule==0 ); + p->pRule = pHead; + } + + return rc; +} + +/* +** This function converts an SQL quoted string into an unquoted string +** and returns a pointer to a buffer allocated using sqlite3_malloc() +** containing the result. The caller should eventually free this buffer +** using sqlite3_free. +** +** Examples: +** +** "abc" becomes abc +** 'xyz' becomes xyz +** [pqr] becomes pqr +** `mno` becomes mno +*/ +static char *amatchDequote(const char *zIn){ + int nIn; /* Size of input string, in bytes */ + char *zOut; /* Output (dequoted) string */ + + nIn = (int)strlen(zIn); + zOut = sqlite3_malloc(nIn+1); + if( zOut ){ + char q = zIn[0]; /* Quote character (if any ) */ + + if( q!='[' && q!= '\'' && q!='"' && q!='`' ){ + memcpy(zOut, zIn, nIn+1); + }else{ + int iOut = 0; /* Index of next byte to write to output */ + int iIn; /* Index of next byte to read from input */ + + if( q=='[' ) q = ']'; + for(iIn=1; iInpVCheck ){ + sqlite3_finalize(p->pVCheck); + p->pVCheck = 0; + } +} + +/* +** Deallocate an amatch_vtab object +*/ +static void amatchFree(amatch_vtab *p){ + if( p ){ + amatchFreeRules(p); + amatchVCheckClear(p); + sqlite3_free(p->zClassName); + sqlite3_free(p->zDb); + sqlite3_free(p->zCostTab); + sqlite3_free(p->zVocabTab); + sqlite3_free(p->zVocabWord); + sqlite3_free(p->zVocabLang); + sqlite3_free(p->zSelf); + memset(p, 0, sizeof(*p)); + sqlite3_free(p); + } +} + +/* +** xDisconnect/xDestroy method for the amatch module. +*/ +static int amatchDisconnect(sqlite3_vtab *pVtab){ + amatch_vtab *p = (amatch_vtab*)pVtab; + assert( p->nCursor==0 ); + amatchFree(p); + return SQLITE_OK; +} + +/* +** Check to see if the argument is of the form: +** +** KEY = VALUE +** +** If it is, return a pointer to the first character of VALUE. +** If not, return NULL. Spaces around the = are ignored. +*/ +static const char *amatchValueOfKey(const char *zKey, const char *zStr){ + int nKey = (int)strlen(zKey); + int nStr = (int)strlen(zStr); + int i; + if( nStr module name ("approximate_match") +** argv[1] -> database name +** argv[2] -> table name +** argv[3...] -> arguments +*/ +static int amatchConnect( + sqlite3 *db, + void *pAux, + int argc, const char *const*argv, + sqlite3_vtab **ppVtab, + char **pzErr +){ + int rc = SQLITE_OK; /* Return code */ + amatch_vtab *pNew = 0; /* New virtual table */ + const char *zModule = argv[0]; + const char *zDb = argv[1]; + const char *zVal; + int i; + + (void)pAux; + *ppVtab = 0; + pNew = sqlite3_malloc( sizeof(*pNew) ); + if( pNew==0 ) return SQLITE_NOMEM; + rc = SQLITE_NOMEM; + memset(pNew, 0, sizeof(*pNew)); + pNew->db = db; + pNew->zClassName = sqlite3_mprintf("%s", zModule); + if( pNew->zClassName==0 ) goto amatchConnectError; + pNew->zDb = sqlite3_mprintf("%s", zDb); + if( pNew->zDb==0 ) goto amatchConnectError; + pNew->zSelf = sqlite3_mprintf("%s", argv[2]); + if( pNew->zSelf==0 ) goto amatchConnectError; + for(i=3; izVocabTab); + pNew->zVocabTab = amatchDequote(zVal); + if( pNew->zVocabTab==0 ) goto amatchConnectError; + continue; + } + zVal = amatchValueOfKey("vocabulary_word", argv[i]); + if( zVal ){ + sqlite3_free(pNew->zVocabWord); + pNew->zVocabWord = amatchDequote(zVal); + if( pNew->zVocabWord==0 ) goto amatchConnectError; + continue; + } + zVal = amatchValueOfKey("vocabulary_language", argv[i]); + if( zVal ){ + sqlite3_free(pNew->zVocabLang); + pNew->zVocabLang = amatchDequote(zVal); + if( pNew->zVocabLang==0 ) goto amatchConnectError; + continue; + } + zVal = amatchValueOfKey("edit_distances", argv[i]); + if( zVal ){ + sqlite3_free(pNew->zCostTab); + pNew->zCostTab = amatchDequote(zVal); + if( pNew->zCostTab==0 ) goto amatchConnectError; + continue; + } + *pzErr = sqlite3_mprintf("unrecognized argument: [%s]\n", argv[i]); + amatchFree(pNew); + *ppVtab = 0; + return SQLITE_ERROR; + } + rc = SQLITE_OK; + if( pNew->zCostTab==0 ){ + *pzErr = sqlite3_mprintf("no edit_distances table specified"); + rc = SQLITE_ERROR; + }else{ + rc = amatchLoadRules(db, pNew, pzErr); + } + if( rc==SQLITE_OK ){ + rc = sqlite3_declare_vtab(db, + "CREATE TABLE x(word,distance,language," + "command HIDDEN,nword HIDDEN)" + ); +#define AMATCH_COL_WORD 0 +#define AMATCH_COL_DISTANCE 1 +#define AMATCH_COL_LANGUAGE 2 +#define AMATCH_COL_COMMAND 3 +#define AMATCH_COL_NWORD 4 + } + if( rc!=SQLITE_OK ){ + amatchFree(pNew); + } + *ppVtab = &pNew->base; + return rc; + +amatchConnectError: + amatchFree(pNew); + return rc; +} + +/* +** Open a new amatch cursor. +*/ +static int amatchOpen(sqlite3_vtab *pVTab, sqlite3_vtab_cursor **ppCursor){ + amatch_vtab *p = (amatch_vtab*)pVTab; + amatch_cursor *pCur; + pCur = sqlite3_malloc( sizeof(*pCur) ); + if( pCur==0 ) return SQLITE_NOMEM; + memset(pCur, 0, sizeof(*pCur)); + pCur->pVtab = p; + *ppCursor = &pCur->base; + p->nCursor++; + return SQLITE_OK; +} + +/* +** Free up all the memory allocated by a cursor. Set it rLimit to 0 +** to indicate that it is at EOF. +*/ +static void amatchClearCursor(amatch_cursor *pCur){ + amatch_word *pWord, *pNextWord; + for(pWord=pCur->pAllWords; pWord; pWord=pNextWord){ + pNextWord = pWord->pNext; + sqlite3_free(pWord); + } + pCur->pAllWords = 0; + sqlite3_free(pCur->zInput); + pCur->zInput = 0; + sqlite3_free(pCur->zBuf); + pCur->zBuf = 0; + pCur->nBuf = 0; + pCur->pCost = 0; + pCur->pWord = 0; + pCur->pCurrent = 0; + pCur->rLimit = 1000000; + pCur->iLang = 0; + pCur->nWord = 0; +} + +/* +** Close a amatch cursor. +*/ +static int amatchClose(sqlite3_vtab_cursor *cur){ + amatch_cursor *pCur = (amatch_cursor *)cur; + amatchClearCursor(pCur); + pCur->pVtab->nCursor--; + sqlite3_free(pCur); + return SQLITE_OK; +} + +/* +** Render a 24-bit unsigned integer as a 4-byte base-64 number. +*/ +static void amatchEncodeInt(int x, char *z){ + static const char a[] = + "0123456789" + "ABCDEFGHIJ" + "KLMNOPQRST" + "UVWXYZ^abc" + "defghijklm" + "nopqrstuvw" + "xyz~"; + z[0] = a[(x>>18)&0x3f]; + z[1] = a[(x>>12)&0x3f]; + z[2] = a[(x>>6)&0x3f]; + z[3] = a[x&0x3f]; +} + +/* +** Write the zCost[] field for a amatch_word object +*/ +static void amatchWriteCost(amatch_word *pWord){ + amatchEncodeInt(pWord->rCost, pWord->zCost); + amatchEncodeInt(pWord->iSeq, pWord->zCost+4); + pWord->zCost[8] = 0; +} + +/* +** Add a new amatch_word object to the queue. +** +** If a prior amatch_word object with the same zWord, and nMatch +** already exists, update its rCost (if the new rCost is less) but +** otherwise leave it unchanged. Do not add a duplicate. +** +** Do nothing if the cost exceeds threshold. +*/ +static void amatchAddWord( + amatch_cursor *pCur, + amatch_cost rCost, + int nMatch, + const char *zWordBase, + const char *zWordTail +){ + amatch_word *pWord; + amatch_avl *pNode; + amatch_avl *pOther; + int nBase, nTail; + char zBuf[4]; + + if( rCost>pCur->rLimit ){ + return; + } + nBase = (int)strlen(zWordBase); + nTail = (int)strlen(zWordTail); + if( nBase+nTail+3>pCur->nBuf ){ + pCur->nBuf = nBase+nTail+100; + pCur->zBuf = sqlite3_realloc(pCur->zBuf, pCur->nBuf); + if( pCur->zBuf==0 ){ + pCur->nBuf = 0; + return; + } + } + amatchEncodeInt(nMatch, zBuf); + memcpy(pCur->zBuf, zBuf+2, 2); + memcpy(pCur->zBuf+2, zWordBase, nBase); + memcpy(pCur->zBuf+2+nBase, zWordTail, nTail+1); + pNode = amatchAvlSearch(pCur->pWord, pCur->zBuf); + if( pNode ){ + pWord = pNode->pWord; + if( pWord->rCost>rCost ){ +#ifdef AMATCH_TRACE_1 + printf("UPDATE [%s][%.*s^%s] %d (\"%s\" \"%s\")\n", + pWord->zWord+2, pWord->nMatch, pCur->zInput, pCur->zInput, + pWord->rCost, pWord->zWord, pWord->zCost); +#endif + amatchAvlRemove(&pCur->pCost, &pWord->sCost); + pWord->rCost = rCost; + amatchWriteCost(pWord); +#ifdef AMATCH_TRACE_1 + printf(" ---> %d (\"%s\" \"%s\")\n", + pWord->rCost, pWord->zWord, pWord->zCost); +#endif + pOther = amatchAvlInsert(&pCur->pCost, &pWord->sCost); + assert( pOther==0 ); (void)pOther; + } + return; + } + pWord = sqlite3_malloc( sizeof(*pWord) + nBase + nTail - 1 ); + if( pWord==0 ) return; + memset(pWord, 0, sizeof(*pWord)); + pWord->rCost = rCost; + pWord->iSeq = pCur->nWord++; + amatchWriteCost(pWord); + pWord->nMatch = nMatch; + pWord->pNext = pCur->pAllWords; + pCur->pAllWords = pWord; + pWord->sCost.zKey = pWord->zCost; + pWord->sCost.pWord = pWord; + pOther = amatchAvlInsert(&pCur->pCost, &pWord->sCost); + assert( pOther==0 ); (void)pOther; + pWord->sWord.zKey = pWord->zWord; + pWord->sWord.pWord = pWord; + strcpy(pWord->zWord, pCur->zBuf); + pOther = amatchAvlInsert(&pCur->pWord, &pWord->sWord); + assert( pOther==0 ); (void)pOther; +#ifdef AMATCH_TRACE_1 + printf("INSERT [%s][%.*s^%s] %d (\"%s\" \"%s\")\n", pWord->zWord+2, + pWord->nMatch, pCur->zInput, pCur->zInput+pWord->nMatch, rCost, + pWord->zWord, pWord->zCost); +#endif +} + +/* +** Advance a cursor to its next row of output +*/ +static int amatchNext(sqlite3_vtab_cursor *cur){ + amatch_cursor *pCur = (amatch_cursor*)cur; + amatch_word *pWord = 0; + amatch_avl *pNode; + int isMatch = 0; + amatch_vtab *p = pCur->pVtab; + int nWord; + int rc; + int i; + const char *zW; + amatch_rule *pRule; + char *zBuf = 0; + char nBuf = 0; + char zNext[8]; + char zNextIn[8]; + int nNextIn; + + if( p->pVCheck==0 ){ + char *zSql; + if( p->zVocabLang && p->zVocabLang[0] ){ + zSql = sqlite3_mprintf( + "SELECT \"%w\" FROM \"%w\"", + " WHERE \"%w\">=?1 AND \"%w\"=?2" + " ORDER BY 1", + p->zVocabWord, p->zVocabTab, + p->zVocabWord, p->zVocabLang + ); + }else{ + zSql = sqlite3_mprintf( + "SELECT \"%w\" FROM \"%w\"" + " WHERE \"%w\">=?1" + " ORDER BY 1", + p->zVocabWord, p->zVocabTab, + p->zVocabWord + ); + } + rc = sqlite3_prepare_v2(p->db, zSql, -1, &p->pVCheck, 0); + sqlite3_free(zSql); + if( rc ) return rc; + } + sqlite3_bind_int(p->pVCheck, 2, pCur->iLang); + + do{ + pNode = amatchAvlFirst(pCur->pCost); + if( pNode==0 ){ + pWord = 0; + break; + } + pWord = pNode->pWord; + amatchAvlRemove(&pCur->pCost, &pWord->sCost); + +#ifdef AMATCH_TRACE_1 + printf("PROCESS [%s][%.*s^%s] %d (\"%s\" \"%s\")\n", + pWord->zWord+2, pWord->nMatch, pCur->zInput, pCur->zInput+pWord->nMatch, + pWord->rCost, pWord->zWord, pWord->zCost); +#endif + nWord = (int)strlen(pWord->zWord+2); + if( nWord+20>nBuf ){ + nBuf = nWord+100; + zBuf = sqlite3_realloc(zBuf, nBuf); + if( zBuf==0 ) return SQLITE_NOMEM; + } + strcpy(zBuf, pWord->zWord+2); + zNext[0] = 0; + zNextIn[0] = pCur->zInput[pWord->nMatch]; + if( zNextIn[0] ){ + for(i=1; i<=4 && (pCur->zInput[pWord->nMatch+i]&0xc0)==0x80; i++){ + zNextIn[i] = pCur->zInput[pWord->nMatch+i]; + } + zNextIn[i] = 0; + nNextIn = i; + }else{ + nNextIn = 0; + } + + if( zNextIn[0] && zNextIn[0]!='*' ){ + sqlite3_reset(p->pVCheck); + strcat(zBuf, zNextIn); + sqlite3_bind_text(p->pVCheck, 1, zBuf, nWord+nNextIn, SQLITE_STATIC); + rc = sqlite3_step(p->pVCheck); + if( rc==SQLITE_ROW ){ + zW = (const char*)sqlite3_column_text(p->pVCheck, 0); + if( strncmp(zBuf, zW, nWord+nNextIn)==0 ){ + amatchAddWord(pCur, pWord->rCost, pWord->nMatch+nNextIn, zBuf, ""); + } + } + zBuf[nWord] = 0; + } + + while( 1 ){ + strcpy(zBuf+nWord, zNext); + sqlite3_reset(p->pVCheck); + sqlite3_bind_text(p->pVCheck, 1, zBuf, -1, SQLITE_TRANSIENT); + rc = sqlite3_step(p->pVCheck); + if( rc!=SQLITE_ROW ) break; + zW = (const char*)sqlite3_column_text(p->pVCheck, 0); + strcpy(zBuf+nWord, zNext); + if( strncmp(zW, zBuf, nWord)!=0 ) break; + if( (zNextIn[0]=='*' && zNextIn[1]==0) + || (zNextIn[0]==0 && zW[nWord]==0) + ){ + isMatch = 1; + zNextIn[0] = 0; + nNextIn = 0; + break; + } + zNext[0] = zW[nWord]; + for(i=1; i<=4 && (zW[nWord+i]&0xc0)==0x80; i++){ + zNext[i] = zW[nWord+i]; + } + zNext[i] = 0; + zBuf[nWord] = 0; + if( p->rIns>0 ){ + amatchAddWord(pCur, pWord->rCost+p->rIns, pWord->nMatch, + zBuf, zNext); + } + if( p->rSub>0 ){ + amatchAddWord(pCur, pWord->rCost+p->rSub, pWord->nMatch+nNextIn, + zBuf, zNext); + } + if( p->rIns<0 && p->rSub<0 ) break; + zNext[i-1]++; /* FIX ME */ + } + sqlite3_reset(p->pVCheck); + + if( p->rDel>0 ){ + zBuf[nWord] = 0; + amatchAddWord(pCur, pWord->rCost+p->rDel, pWord->nMatch+nNextIn, + zBuf, ""); + } + + for(pRule=p->pRule; pRule; pRule=pRule->pNext){ + if( pRule->iLang!=pCur->iLang ) continue; + if( strncmp(pRule->zFrom, pCur->zInput+pWord->nMatch, pRule->nFrom)==0 ){ + amatchAddWord(pCur, pWord->rCost+pRule->rCost, + pWord->nMatch+pRule->nFrom, pWord->zWord+2, pRule->zTo); + } + } + }while( !isMatch ); + pCur->pCurrent = pWord; + sqlite3_free(zBuf); + return SQLITE_OK; +} + +/* +** Called to "rewind" a cursor back to the beginning so that +** it starts its output over again. Always called at least once +** prior to any amatchColumn, amatchRowid, or amatchEof call. +*/ +static int amatchFilter( + sqlite3_vtab_cursor *pVtabCursor, + int idxNum, const char *idxStr, + int argc, sqlite3_value **argv +){ + amatch_cursor *pCur = (amatch_cursor *)pVtabCursor; + const char *zWord = "*"; + int idx; + + amatchClearCursor(pCur); + idx = 0; + if( idxNum & 1 ){ + zWord = (const char*)sqlite3_value_text(argv[0]); + idx++; + } + if( idxNum & 2 ){ + pCur->rLimit = (amatch_cost)sqlite3_value_int(argv[idx]); + idx++; + } + if( idxNum & 4 ){ + pCur->iLang = (amatch_cost)sqlite3_value_int(argv[idx]); + idx++; + } + pCur->zInput = sqlite3_mprintf("%s", zWord); + if( pCur->zInput==0 ) return SQLITE_NOMEM; + amatchAddWord(pCur, 0, 0, "", ""); + amatchNext(pVtabCursor); + + return SQLITE_OK; +} + +/* +** Only the word and distance columns have values. All other columns +** return NULL +*/ +static int amatchColumn(sqlite3_vtab_cursor *cur, sqlite3_context *ctx, int i){ + amatch_cursor *pCur = (amatch_cursor*)cur; + switch( i ){ + case AMATCH_COL_WORD: { + sqlite3_result_text(ctx, pCur->pCurrent->zWord+2, -1, SQLITE_STATIC); + break; + } + case AMATCH_COL_DISTANCE: { + sqlite3_result_int(ctx, pCur->pCurrent->rCost); + break; + } + case AMATCH_COL_LANGUAGE: { + sqlite3_result_int(ctx, pCur->iLang); + break; + } + case AMATCH_COL_NWORD: { + sqlite3_result_int(ctx, pCur->nWord); + break; + } + default: { + sqlite3_result_null(ctx); + break; + } + } + return SQLITE_OK; +} + +/* +** The rowid. +*/ +static int amatchRowid(sqlite3_vtab_cursor *cur, sqlite_int64 *pRowid){ + amatch_cursor *pCur = (amatch_cursor*)cur; + *pRowid = pCur->iRowid; + return SQLITE_OK; +} + +/* +** EOF indicator +*/ +static int amatchEof(sqlite3_vtab_cursor *cur){ + amatch_cursor *pCur = (amatch_cursor*)cur; + return pCur->pCurrent==0; +} + +/* +** Search for terms of these forms: +** +** (A) word MATCH $str +** (B1) distance < $value +** (B2) distance <= $value +** (C) language == $language +** +** The distance< and distance<= are both treated as distance<=. +** The query plan number is a bit vector: +** +** bit 1: Term of the form (A) found +** bit 2: Term like (B1) or (B2) found +** bit 3: Term like (C) found +** +** If bit-1 is set, $str is always in filter.argv[0]. If bit-2 is set +** then $value is in filter.argv[0] if bit-1 is clear and is in +** filter.argv[1] if bit-1 is set. If bit-3 is set, then $ruleid is +** in filter.argv[0] if bit-1 and bit-2 are both zero, is in +** filter.argv[1] if exactly one of bit-1 and bit-2 are set, and is in +** filter.argv[2] if both bit-1 and bit-2 are set. +*/ +static int amatchBestIndex( + sqlite3_vtab *tab, + sqlite3_index_info *pIdxInfo +){ + int iPlan = 0; + int iDistTerm = -1; + int iLangTerm = -1; + int i; + const struct sqlite3_index_constraint *pConstraint; + + (void)tab; + pConstraint = pIdxInfo->aConstraint; + for(i=0; inConstraint; i++, pConstraint++){ + if( pConstraint->usable==0 ) continue; + if( (iPlan & 1)==0 + && pConstraint->iColumn==0 + && pConstraint->op==SQLITE_INDEX_CONSTRAINT_MATCH + ){ + iPlan |= 1; + pIdxInfo->aConstraintUsage[i].argvIndex = 1; + pIdxInfo->aConstraintUsage[i].omit = 1; + } + if( (iPlan & 2)==0 + && pConstraint->iColumn==1 + && (pConstraint->op==SQLITE_INDEX_CONSTRAINT_LT + || pConstraint->op==SQLITE_INDEX_CONSTRAINT_LE) + ){ + iPlan |= 2; + iDistTerm = i; + } + if( (iPlan & 4)==0 + && pConstraint->iColumn==2 + && pConstraint->op==SQLITE_INDEX_CONSTRAINT_EQ + ){ + iPlan |= 4; + pIdxInfo->aConstraintUsage[i].omit = 1; + iLangTerm = i; + } + } + if( iPlan & 2 ){ + pIdxInfo->aConstraintUsage[iDistTerm].argvIndex = 1+((iPlan&1)!=0); + } + if( iPlan & 4 ){ + int idx = 1; + if( iPlan & 1 ) idx++; + if( iPlan & 2 ) idx++; + pIdxInfo->aConstraintUsage[iLangTerm].argvIndex = idx; + } + pIdxInfo->idxNum = iPlan; + if( pIdxInfo->nOrderBy==1 + && pIdxInfo->aOrderBy[0].iColumn==1 + && pIdxInfo->aOrderBy[0].desc==0 + ){ + pIdxInfo->orderByConsumed = 1; + } + pIdxInfo->estimatedCost = (double)10000; + + return SQLITE_OK; +} + +/* +** The xUpdate() method. +** +** This implementation disallows DELETE and UPDATE. The only thing +** allowed is INSERT into the "command" column. +*/ +static int amatchUpdate( + sqlite3_vtab *pVTab, + int argc, + sqlite3_value **argv, + sqlite_int64 *pRowid +){ + amatch_vtab *p = (amatch_vtab*)pVTab; + const unsigned char *zCmd; + (void)pRowid; + if( argc==1 ){ + pVTab->zErrMsg = sqlite3_mprintf("DELETE from %s is not allowed", + p->zSelf); + return SQLITE_ERROR; + } + if( sqlite3_value_type(argv[0])!=SQLITE_NULL ){ + pVTab->zErrMsg = sqlite3_mprintf("UPDATE of %s is not allowed", + p->zSelf); + return SQLITE_ERROR; + } + if( sqlite3_value_type(argv[2+AMATCH_COL_WORD])!=SQLITE_NULL + || sqlite3_value_type(argv[2+AMATCH_COL_DISTANCE])!=SQLITE_NULL + || sqlite3_value_type(argv[2+AMATCH_COL_LANGUAGE])!=SQLITE_NULL + ){ + pVTab->zErrMsg = sqlite3_mprintf( + "INSERT INTO %s allowed for column [command] only", p->zSelf); + return SQLITE_ERROR; + } + zCmd = sqlite3_value_text(argv[2+AMATCH_COL_COMMAND]); + if( zCmd==0 ) return SQLITE_OK; + + return SQLITE_OK; +} + +/* +** A virtual table module that implements the "approximate_match". +*/ +static sqlite3_module amatchModule = { + 0, /* iVersion */ + amatchConnect, /* xCreate */ + amatchConnect, /* xConnect */ + amatchBestIndex, /* xBestIndex */ + amatchDisconnect, /* xDisconnect */ + amatchDisconnect, /* xDestroy */ + amatchOpen, /* xOpen - open a cursor */ + amatchClose, /* xClose - close a cursor */ + amatchFilter, /* xFilter - configure scan constraints */ + amatchNext, /* xNext - advance a cursor */ + amatchEof, /* xEof - check for end of scan */ + amatchColumn, /* xColumn - read data */ + amatchRowid, /* xRowid - read data */ + amatchUpdate, /* xUpdate */ + 0, /* xBegin */ + 0, /* xSync */ + 0, /* xCommit */ + 0, /* xRollback */ + 0, /* xFindMethod */ + 0, /* xRename */ + 0, /* xSavepoint */ + 0, /* xRelease */ + 0 /* xRollbackTo */ +}; + +#endif /* SQLITE_OMIT_VIRTUALTABLE */ + +/* +** Register the amatch virtual table +*/ +#ifdef _WIN32 +__declspec(dllexport) +#endif +int sqlite3_amatch_init( + sqlite3 *db, + char **pzErrMsg, + const sqlite3_api_routines *pApi +){ + int rc = SQLITE_OK; + SQLITE_EXTENSION_INIT2(pApi); + (void)pzErrMsg; /* Not used */ +#ifndef SQLITE_OMIT_VIRTUALTABLE + rc = sqlite3_create_module(db, "approximate_match", &amatchModule, 0); +#endif /* SQLITE_OMIT_VIRTUALTABLE */ + return rc; +} ADDED ext/misc/closure.c Index: ext/misc/closure.c ================================================================== --- ext/misc/closure.c +++ ext/misc/closure.c @@ -0,0 +1,958 @@ +/* +** 2013-04-16 +** +** The author disclaims copyright to this source code. In place of +** a legal notice, here is a blessing: +** +** May you do good and not evil. +** May you find forgiveness for yourself and forgive others. +** May you share freely, never taking more than you give. +** +************************************************************************* +** +** This file contains code for a virtual table that finds the transitive +** closure of a parent/child relationship in a real table. The virtual +** table is called "transitive_closure". +** +** A transitive_closure virtual table is created like this: +** +** CREATE VIRTUAL TABLE x USING transitive_closure( +** tablename=, -- T +** idcolumn=, -- X +** parentcolumn= -- P +** ); +** +** When it is created, the new transitive_closure table may be supplied +** with default values for the name of a table T and columns T.X and T.P. +** The T.X and T.P columns must contain integers. The ideal case is for +** T.X to be the INTEGER PRIMARY KEY. The T.P column should reference +** the T.X column. The row referenced by T.P is the parent of the current row. +** +** The tablename, idcolumn, and parentcolumn supplied by the CREATE VIRTUAL +** TABLE statement may be overridden in individual queries by including +** terms like tablename='newtable', idcolumn='id2', or +** parentcolumn='parent3' in the WHERE clause of the query. +** +** For efficiency, it is essential that there be an index on the P column: +** +** CREATE Tidx1 ON T(P) +** +** Suppose a specific instance of the closure table is as follows: +** +** CREATE VIRTUAL TABLE ct1 USING transitive_closure( +** tablename='group', +** idcolumn='groupId', +** parentcolumn='parentId' +** ); +** +** Such an instance of the transitive_closure virtual table would be +** appropriate for walking a tree defined using a table like this, for example: +** +** CREATE TABLE group( +** groupId INTEGER PRIMARY KEY, +** parentId INTEGER REFERENCES group +** ); +** CREATE INDEX group_idx1 ON group(parentId); +** +** The group table above would presumably have other application-specific +** fields. The key point here is that rows of the group table form a +** tree. The purpose of the ct1 virtual table is to easily extract +** branches of that tree. +** +** Once it has been created, the ct1 virtual table can be queried +** as follows: +** +** SELECT * FROM element +** WHERE element.groupId IN (SELECT id FROM ct1 WHERE root=?1); +** +** The above query will return all elements that are part of group ?1 +** or children of group ?1 or grand-children of ?1 and so forth for all +** descendents of group ?1. The same query can be formulated as a join: +** +** SELECT element.* FROM element, ct1 +** WHERE element.groupid=ct1.id +** AND ct1.root=?1; +** +** The depth of the transitive_closure (the number of generations of +** parent/child relations to follow) can be limited by setting "depth" +** column in the WHERE clause. So, for example, the following query +** finds only children and grandchildren but no further descendents: +** +** SELECT element.* FROM element, ct1 +** WHERE element.groupid=ct1.id +** AND ct1.root=?1 +** AND ct1.depth<=2; +** +** The "ct1.depth<=2" term could be a strict equality "ct1.depth=2" in +** order to find only the grandchildren of ?1, not ?1 itself or the +** children of ?1. +** +** The root=?1 term must be supplied in WHERE clause or else the query +** of the ct1 virtual table will return an empty set. The tablename, +** idcolumn, and parentcolumn attributes can be overridden in the WHERE +** clause if desired. So, for example, the ct1 table could be repurposed +** to find ancestors rather than descendents by inverting the roles of +** the idcolumn and parentcolumn: +** +** SELECT element.* FROM element, ct1 +** WHERE element.groupid=ct1.id +** AND ct1.root=?1 +** AND ct1.idcolumn='parentId' +** AND ct1.parentcolumn='groupId'; +** +** Multiple calls to ct1 could be combined. For example, the following +** query finds all elements that "cousins" of groupId ?1. That is to say +** elements where the groupId is a grandchild of the grandparent of ?1. +** (This definition of "cousins" also includes siblings and self.) +** +** SELECT element.* FROM element, ct1 +** WHERE element.groupId=ct1.id +** AND ct1.depth=2 +** AND ct1.root IN (SELECT id FROM ct1 +** WHERE root=?1 +** AND depth=2 +** AND idcolumn='parentId' +** AND parentcolumn='groupId'); +** +** In our example, the group.groupId column is unique and thus the +** subquery will return exactly one row. For that reason, the IN +** operator could be replaced by "=" to get the same result. But +** in the general case where the idcolumn is not unique, an IN operator +** would be required for this kind of query. +** +** Note that because the tablename, idcolumn, and parentcolumn can +** all be specified in the query, it is possible for an application +** to define a single transitive_closure virtual table for use on lots +** of different hierarchy tables. One might say: +** +** CREATE VIRTUAL TABLE temp.closure USING transitive_closure; +** +** As each database connection is being opened. Then the application +** would always have a "closure" virtual table handy to use for querying. +** +** SELECT element.* FROM element, closure +** WHERE element.groupid=ct1.id +** AND closure.root=?1 +** AND closure.tablename='group' +** AND closure.idname='groupId' +** AND closure.parentname='parentId'; +** +** See the documentation at http://www.sqlite.org/loadext.html for information +** on how to compile and use loadable extensions such as this one. +*/ +#include "sqlite3ext.h" +SQLITE_EXTENSION_INIT1 +#include +#include +#include +#include +#include + +#ifndef SQLITE_OMIT_VIRTUALTABLE + +/* +** Forward declaration of objects used by this implementation +*/ +typedef struct closure_vtab closure_vtab; +typedef struct closure_cursor closure_cursor; +typedef struct closure_queue closure_queue; +typedef struct closure_avl closure_avl; + +/***************************************************************************** +** AVL Tree implementation +*/ +/* +** Objects that want to be members of the AVL tree should embedded an +** instance of this structure. +*/ +struct closure_avl { + sqlite3_int64 id; /* Id of this entry in the table */ + int iGeneration; /* Which generation is this entry part of */ + closure_avl *pList; /* A linked list of nodes */ + closure_avl *pBefore; /* Other elements less than id */ + closure_avl *pAfter; /* Other elements greater than id */ + closure_avl *pUp; /* Parent element */ + short int height; /* Height of this node. Leaf==1 */ + short int imbalance; /* Height difference between pBefore and pAfter */ +}; + +/* Recompute the closure_avl.height and closure_avl.imbalance fields for p. +** Assume that the children of p have correct heights. +*/ +static void closureAvlRecomputeHeight(closure_avl *p){ + short int hBefore = p->pBefore ? p->pBefore->height : 0; + short int hAfter = p->pAfter ? p->pAfter->height : 0; + p->imbalance = hBefore - hAfter; /* -: pAfter higher. +: pBefore higher */ + p->height = (hBefore>hAfter ? hBefore : hAfter)+1; +} + +/* +** P B +** / \ / \ +** B Z ==> X P +** / \ / \ +** X Y Y Z +** +*/ +static closure_avl *closureAvlRotateBefore(closure_avl *pP){ + closure_avl *pB = pP->pBefore; + closure_avl *pY = pB->pAfter; + pB->pUp = pP->pUp; + pB->pAfter = pP; + pP->pUp = pB; + pP->pBefore = pY; + if( pY ) pY->pUp = pP; + closureAvlRecomputeHeight(pP); + closureAvlRecomputeHeight(pB); + return pB; +} + +/* +** P A +** / \ / \ +** X A ==> P Z +** / \ / \ +** Y Z X Y +** +*/ +static closure_avl *closureAvlRotateAfter(closure_avl *pP){ + closure_avl *pA = pP->pAfter; + closure_avl *pY = pA->pBefore; + pA->pUp = pP->pUp; + pA->pBefore = pP; + pP->pUp = pA; + pP->pAfter = pY; + if( pY ) pY->pUp = pP; + closureAvlRecomputeHeight(pP); + closureAvlRecomputeHeight(pA); + return pA; +} + +/* +** Return a pointer to the pBefore or pAfter pointer in the parent +** of p that points to p. Or if p is the root node, return pp. +*/ +static closure_avl **closureAvlFromPtr(closure_avl *p, closure_avl **pp){ + closure_avl *pUp = p->pUp; + if( pUp==0 ) return pp; + if( pUp->pAfter==p ) return &pUp->pAfter; + return &pUp->pBefore; +} + +/* +** Rebalance all nodes starting with p and working up to the root. +** Return the new root. +*/ +static closure_avl *closureAvlBalance(closure_avl *p){ + closure_avl *pTop = p; + closure_avl **pp; + while( p ){ + closureAvlRecomputeHeight(p); + if( p->imbalance>=2 ){ + closure_avl *pB = p->pBefore; + if( pB->imbalance<0 ) p->pBefore = closureAvlRotateAfter(pB); + pp = closureAvlFromPtr(p,&p); + p = *pp = closureAvlRotateBefore(p); + }else if( p->imbalance<=(-2) ){ + closure_avl *pA = p->pAfter; + if( pA->imbalance>0 ) p->pAfter = closureAvlRotateBefore(pA); + pp = closureAvlFromPtr(p,&p); + p = *pp = closureAvlRotateAfter(p); + } + pTop = p; + p = p->pUp; + } + return pTop; +} + +/* Search the tree rooted at p for an entry with id. Return a pointer +** to the entry or return NULL. +*/ +static closure_avl *closureAvlSearch(closure_avl *p, sqlite3_int64 id){ + while( p && id!=p->id ){ + p = (idid) ? p->pBefore : p->pAfter; + } + return p; +} + +/* Find the first node (the one with the smallest key). +*/ +static closure_avl *closureAvlFirst(closure_avl *p){ + if( p ) while( p->pBefore ) p = p->pBefore; + return p; +} + +/* Return the node with the next larger key after p. +*/ +closure_avl *closureAvlNext(closure_avl *p){ + closure_avl *pPrev = 0; + while( p && p->pAfter==pPrev ){ + pPrev = p; + p = p->pUp; + } + if( p && pPrev==0 ){ + p = closureAvlFirst(p->pAfter); + } + return p; +} + +/* Insert a new node pNew. Return NULL on success. If the key is not +** unique, then do not perform the insert but instead leave pNew unchanged +** and return a pointer to an existing node with the same key. +*/ +static closure_avl *closureAvlInsert( + closure_avl **ppHead, /* Head of the tree */ + closure_avl *pNew /* New node to be inserted */ +){ + closure_avl *p = *ppHead; + if( p==0 ){ + p = pNew; + pNew->pUp = 0; + }else{ + while( p ){ + if( pNew->idid ){ + if( p->pBefore ){ + p = p->pBefore; + }else{ + p->pBefore = pNew; + pNew->pUp = p; + break; + } + }else if( pNew->id>p->id ){ + if( p->pAfter ){ + p = p->pAfter; + }else{ + p->pAfter = pNew; + pNew->pUp = p; + break; + } + }else{ + return p; + } + } + } + pNew->pBefore = 0; + pNew->pAfter = 0; + pNew->height = 1; + pNew->imbalance = 0; + *ppHead = closureAvlBalance(p); + return 0; +} + +/* Walk the tree can call xDestroy on each node +*/ +static void closureAvlDestroy(closure_avl *p, void (*xDestroy)(closure_avl*)){ + if( p ){ + closureAvlDestroy(p->pBefore, xDestroy); + closureAvlDestroy(p->pAfter, xDestroy); + xDestroy(p); + } +} +/* +** End of the AVL Tree implementation +******************************************************************************/ + +/* +** A closure virtual-table object +*/ +struct closure_vtab { + sqlite3_vtab base; /* Base class - must be first */ + char *zDb; /* Name of database. (ex: "main") */ + char *zSelf; /* Name of this virtual table */ + char *zTableName; /* Name of table holding parent/child relation */ + char *zIdColumn; /* Name of ID column of zTableName */ + char *zParentColumn; /* Name of PARENT column in zTableName */ + sqlite3 *db; /* The database connection */ + int nCursor; /* Number of pending cursors */ +}; + +/* A closure cursor object */ +struct closure_cursor { + sqlite3_vtab_cursor base; /* Base class - must be first */ + closure_vtab *pVtab; /* The virtual table this cursor belongs to */ + char *zTableName; /* Name of table holding parent/child relation */ + char *zIdColumn; /* Name of ID column of zTableName */ + char *zParentColumn; /* Name of PARENT column in zTableName */ + closure_avl *pCurrent; /* Current element of output */ + closure_avl *pClosure; /* The complete closure tree */ +}; + +/* A queue of AVL nodes */ +struct closure_queue { + closure_avl *pFirst; /* Oldest node on the queue */ + closure_avl *pLast; /* Youngest node on the queue */ +}; + +/* +** Add a node to the end of the queue +*/ +static void queuePush(closure_queue *pQueue, closure_avl *pNode){ + pNode->pList = 0; + if( pQueue->pLast ){ + pQueue->pLast->pList = pNode; + }else{ + pQueue->pFirst = pNode; + } + pQueue->pLast = pNode; +} + +/* +** Extract the oldest element (the front element) from the queue. +*/ +static closure_avl *queuePull(closure_queue *pQueue){ + closure_avl *p = pQueue->pFirst; + if( p ){ + pQueue->pFirst = p->pList; + if( pQueue->pFirst==0 ) pQueue->pLast = 0; + } + return p; +} + +/* +** This function converts an SQL quoted string into an unquoted string +** and returns a pointer to a buffer allocated using sqlite3_malloc() +** containing the result. The caller should eventually free this buffer +** using sqlite3_free. +** +** Examples: +** +** "abc" becomes abc +** 'xyz' becomes xyz +** [pqr] becomes pqr +** `mno` becomes mno +*/ +static char *closureDequote(const char *zIn){ + int nIn; /* Size of input string, in bytes */ + char *zOut; /* Output (dequoted) string */ + + nIn = (int)strlen(zIn); + zOut = sqlite3_malloc(nIn+1); + if( zOut ){ + char q = zIn[0]; /* Quote character (if any ) */ + + if( q!='[' && q!= '\'' && q!='"' && q!='`' ){ + memcpy(zOut, zIn, nIn+1); + }else{ + int iOut = 0; /* Index of next byte to write to output */ + int iIn; /* Index of next byte to read from input */ + + if( q=='[' ) q = ']'; + for(iIn=1; iInzDb); + sqlite3_free(p->zSelf); + sqlite3_free(p->zTableName); + sqlite3_free(p->zIdColumn); + sqlite3_free(p->zParentColumn); + memset(p, 0, sizeof(*p)); + sqlite3_free(p); + } +} + +/* +** xDisconnect/xDestroy method for the closure module. +*/ +static int closureDisconnect(sqlite3_vtab *pVtab){ + closure_vtab *p = (closure_vtab*)pVtab; + assert( p->nCursor==0 ); + closureFree(p); + return SQLITE_OK; +} + +/* +** Check to see if the argument is of the form: +** +** KEY = VALUE +** +** If it is, return a pointer to the first character of VALUE. +** If not, return NULL. Spaces around the = are ignored. +*/ +static const char *closureValueOfKey(const char *zKey, const char *zStr){ + int nKey = (int)strlen(zKey); + int nStr = (int)strlen(zStr); + int i; + if( nStr module name ("transitive_closure") +** argv[1] -> database name +** argv[2] -> table name +** argv[3...] -> arguments +*/ +static int closureConnect( + sqlite3 *db, + void *pAux, + int argc, const char *const*argv, + sqlite3_vtab **ppVtab, + char **pzErr +){ + int rc = SQLITE_OK; /* Return code */ + closure_vtab *pNew = 0; /* New virtual table */ + const char *zDb = argv[1]; + const char *zVal; + int i; + + (void)pAux; + *ppVtab = 0; + pNew = sqlite3_malloc( sizeof(*pNew) ); + if( pNew==0 ) return SQLITE_NOMEM; + rc = SQLITE_NOMEM; + memset(pNew, 0, sizeof(*pNew)); + pNew->db = db; + pNew->zDb = sqlite3_mprintf("%s", zDb); + if( pNew->zDb==0 ) goto closureConnectError; + pNew->zSelf = sqlite3_mprintf("%s", argv[2]); + if( pNew->zSelf==0 ) goto closureConnectError; + for(i=3; izTableName); + pNew->zTableName = closureDequote(zVal); + if( pNew->zTableName==0 ) goto closureConnectError; + continue; + } + zVal = closureValueOfKey("idcolumn", argv[i]); + if( zVal ){ + sqlite3_free(pNew->zIdColumn); + pNew->zIdColumn = closureDequote(zVal); + if( pNew->zIdColumn==0 ) goto closureConnectError; + continue; + } + zVal = closureValueOfKey("parentcolumn", argv[i]); + if( zVal ){ + sqlite3_free(pNew->zParentColumn); + pNew->zParentColumn = closureDequote(zVal); + if( pNew->zParentColumn==0 ) goto closureConnectError; + continue; + } + *pzErr = sqlite3_mprintf("unrecognized argument: [%s]\n", argv[i]); + closureFree(pNew); + *ppVtab = 0; + return SQLITE_ERROR; + } + rc = sqlite3_declare_vtab(db, + "CREATE TABLE x(id,depth,root HIDDEN,tablename HIDDEN," + "idcolumn HIDDEN,parentcolumn HIDDEN)" + ); +#define CLOSURE_COL_ID 0 +#define CLOSURE_COL_DEPTH 1 +#define CLOSURE_COL_ROOT 2 +#define CLOSURE_COL_TABLENAME 3 +#define CLOSURE_COL_IDCOLUMN 4 +#define CLOSURE_COL_PARENTCOLUMN 5 + if( rc!=SQLITE_OK ){ + closureFree(pNew); + } + *ppVtab = &pNew->base; + return rc; + +closureConnectError: + closureFree(pNew); + return rc; +} + +/* +** Open a new closure cursor. +*/ +static int closureOpen(sqlite3_vtab *pVTab, sqlite3_vtab_cursor **ppCursor){ + closure_vtab *p = (closure_vtab*)pVTab; + closure_cursor *pCur; + pCur = sqlite3_malloc( sizeof(*pCur) ); + if( pCur==0 ) return SQLITE_NOMEM; + memset(pCur, 0, sizeof(*pCur)); + pCur->pVtab = p; + *ppCursor = &pCur->base; + p->nCursor++; + return SQLITE_OK; +} + +/* +** Free up all the memory allocated by a cursor. Set it rLimit to 0 +** to indicate that it is at EOF. +*/ +static void closureClearCursor(closure_cursor *pCur){ + closureAvlDestroy(pCur->pClosure, (void(*)(closure_avl*))sqlite3_free); + sqlite3_free(pCur->zTableName); + sqlite3_free(pCur->zIdColumn); + sqlite3_free(pCur->zParentColumn); + pCur->zTableName = 0; + pCur->zIdColumn = 0; + pCur->zParentColumn = 0; + pCur->pCurrent = 0; + pCur->pClosure = 0; +} + +/* +** Close a closure cursor. +*/ +static int closureClose(sqlite3_vtab_cursor *cur){ + closure_cursor *pCur = (closure_cursor *)cur; + closureClearCursor(pCur); + pCur->pVtab->nCursor--; + sqlite3_free(pCur); + return SQLITE_OK; +} + +/* +** Advance a cursor to its next row of output +*/ +static int closureNext(sqlite3_vtab_cursor *cur){ + closure_cursor *pCur = (closure_cursor*)cur; + pCur->pCurrent = closureAvlNext(pCur->pCurrent); + return SQLITE_OK; +} + +/* +** Allocate and insert a node +*/ +static int closureInsertNode( + closure_queue *pQueue, /* Add new node to this queue */ + closure_cursor *pCur, /* The cursor into which to add the node */ + sqlite3_int64 id, /* The node ID */ + int iGeneration /* The generation number for this node */ +){ + closure_avl *pNew = sqlite3_malloc( sizeof(*pNew) ); + if( pNew==0 ) return SQLITE_NOMEM; + memset(pNew, 0, sizeof(*pNew)); + pNew->id = id; + pNew->iGeneration = iGeneration; + closureAvlInsert(&pCur->pClosure, pNew); + queuePush(pQueue, pNew); + return SQLITE_OK; +} + +/* +** Called to "rewind" a cursor back to the beginning so that +** it starts its output over again. Always called at least once +** prior to any closureColumn, closureRowid, or closureEof call. +** +** This routine actually computes the closure. +** +** See the comment at the beginning of closureBestIndex() for a +** description of the meaning of idxNum. The idxStr parameter is +** not used. +*/ +static int closureFilter( + sqlite3_vtab_cursor *pVtabCursor, + int idxNum, const char *idxStr, + int argc, sqlite3_value **argv +){ + closure_cursor *pCur = (closure_cursor *)pVtabCursor; + closure_vtab *pVtab = pCur->pVtab; + sqlite3_int64 iRoot; + int mxGen = 999999999; + char *zSql; + sqlite3_stmt *pStmt; + closure_avl *pAvl; + int rc = SQLITE_OK; + const char *zTableName = pVtab->zTableName; + const char *zIdColumn = pVtab->zIdColumn; + const char *zParentColumn = pVtab->zParentColumn; + closure_queue sQueue; + + (void)idxStr; /* Unused parameter */ + (void)argc; /* Unused parameter */ + closureClearCursor(pCur); + memset(&sQueue, 0, sizeof(sQueue)); + if( (idxNum & 1)==0 ){ + /* No root=$root in the WHERE clause. Return an empty set */ + return SQLITE_OK; + } + iRoot = sqlite3_value_int64(argv[0]); + if( (idxNum & 0x000f0)!=0 ){ + mxGen = sqlite3_value_int(argv[(idxNum>>4)&0x0f]); + if( (idxNum & 0x00002)!=0 ) mxGen--; + } + if( (idxNum & 0x00f00)!=0 ){ + zTableName = (const char*)sqlite3_value_text(argv[(idxNum>>8)&0x0f]); + pCur->zTableName = sqlite3_mprintf("%s", zTableName); + } + if( (idxNum & 0x0f000)!=0 ){ + zIdColumn = (const char*)sqlite3_value_text(argv[(idxNum>>12)&0x0f]); + pCur->zIdColumn = sqlite3_mprintf("%s", zIdColumn); + } + if( (idxNum & 0x0f0000)!=0 ){ + zParentColumn = (const char*)sqlite3_value_text(argv[(idxNum>>16)&0x0f]); + pCur->zParentColumn = sqlite3_mprintf("%s", zParentColumn); + } + + zSql = sqlite3_mprintf( + "SELECT \"%w\".\"%w\" FROM \"%w\" WHERE \"%w\".\"%w\"=?1", + zTableName, zIdColumn, zTableName, zTableName, zParentColumn); + if( zSql==0 ){ + return SQLITE_NOMEM; + }else{ + rc = sqlite3_prepare_v2(pVtab->db, zSql, -1, &pStmt, 0); + sqlite3_free(zSql); + if( rc ){ + sqlite3_free(pVtab->base.zErrMsg); + pVtab->base.zErrMsg = sqlite3_mprintf("%s", sqlite3_errmsg(pVtab->db)); + return rc; + } + } + if( rc==SQLITE_OK ){ + rc = closureInsertNode(&sQueue, pCur, iRoot, 0); + } + while( (pAvl = queuePull(&sQueue))!=0 ){ + if( pAvl->iGeneration>=mxGen ) continue; + sqlite3_bind_int64(pStmt, 1, pAvl->id); + while( rc==SQLITE_OK && sqlite3_step(pStmt)==SQLITE_ROW ){ + if( sqlite3_column_type(pStmt,0)==SQLITE_INTEGER ){ + sqlite3_int64 iNew = sqlite3_column_int64(pStmt, 0); + if( closureAvlSearch(pCur->pClosure, iNew)==0 ){ + rc = closureInsertNode(&sQueue, pCur, iNew, pAvl->iGeneration+1); + } + } + } + sqlite3_reset(pStmt); + } + sqlite3_finalize(pStmt); + if( rc==SQLITE_OK ){ + pCur->pCurrent = closureAvlFirst(pCur->pClosure); + } + + return rc; +} + +/* +** Only the word and distance columns have values. All other columns +** return NULL +*/ +static int closureColumn(sqlite3_vtab_cursor *cur, sqlite3_context *ctx, int i){ + closure_cursor *pCur = (closure_cursor*)cur; + switch( i ){ + case CLOSURE_COL_ID: { + sqlite3_result_int64(ctx, pCur->pCurrent->id); + break; + } + case CLOSURE_COL_DEPTH: { + sqlite3_result_int(ctx, pCur->pCurrent->iGeneration); + break; + } + case CLOSURE_COL_ROOT: { + sqlite3_result_null(ctx); + break; + } + case CLOSURE_COL_TABLENAME: { + sqlite3_result_text(ctx, + pCur->zTableName ? pCur->zTableName : pCur->pVtab->zTableName, + -1, SQLITE_TRANSIENT); + break; + } + case CLOSURE_COL_IDCOLUMN: { + sqlite3_result_text(ctx, + pCur->zIdColumn ? pCur->zIdColumn : pCur->pVtab->zIdColumn, + -1, SQLITE_TRANSIENT); + break; + } + case CLOSURE_COL_PARENTCOLUMN: { + sqlite3_result_text(ctx, + pCur->zParentColumn ? pCur->zParentColumn : pCur->pVtab->zParentColumn, + -1, SQLITE_TRANSIENT); + break; + } + } + return SQLITE_OK; +} + +/* +** The rowid. For the closure table, this is the same as the "id" column. +*/ +static int closureRowid(sqlite3_vtab_cursor *cur, sqlite_int64 *pRowid){ + closure_cursor *pCur = (closure_cursor*)cur; + *pRowid = pCur->pCurrent->id; + return SQLITE_OK; +} + +/* +** EOF indicator +*/ +static int closureEof(sqlite3_vtab_cursor *cur){ + closure_cursor *pCur = (closure_cursor*)cur; + return pCur->pCurrent==0; +} + +/* +** Search for terms of these forms: +** +** (A) root = $root +** (B1) depth < $depth +** (B2) depth <= $depth +** (B3) depth = $depth +** (C) tablename = $tablename +** (D) idcolumn = $idcolumn +** (E) parentcolumn = $parentcolumn +** +** +** +** idxNum meaning +** ---------- ------------------------------------------------------ +** 0x00000001 Term of the form (A) found +** 0x00000002 The term of bit-2 is like (B1) +** 0x000000f0 Index in filter.argv[] of $depth. 0 if not used. +** 0x00000f00 Index in filter.argv[] of $tablename. 0 if not used. +** 0x0000f000 Index in filter.argv[] of $idcolumn. 0 if not used +** 0x000f0000 Index in filter.argv[] of $parentcolumn. 0 if not used. +** +** There must be a term of type (A). If there is not, then the index type +** is 0 and the query will return an empty set. +*/ +static int closureBestIndex( + sqlite3_vtab *pTab, /* The virtual table */ + sqlite3_index_info *pIdxInfo /* Information about the query */ +){ + int iPlan = 0; + int i; + int idx = 1; + int seenMatch = 0; + const struct sqlite3_index_constraint *pConstraint; + closure_vtab *pVtab = (closure_vtab*)pTab; + double rCost = 10000000.0; + + pConstraint = pIdxInfo->aConstraint; + for(i=0; inConstraint; i++, pConstraint++){ + if( pConstraint->iColumn==CLOSURE_COL_ROOT + && pConstraint->op==SQLITE_INDEX_CONSTRAINT_EQ ){ + seenMatch = 1; + } + if( pConstraint->usable==0 ) continue; + if( (iPlan & 1)==0 + && pConstraint->iColumn==CLOSURE_COL_ROOT + && pConstraint->op==SQLITE_INDEX_CONSTRAINT_EQ + ){ + iPlan |= 1; + pIdxInfo->aConstraintUsage[i].argvIndex = 1; + pIdxInfo->aConstraintUsage[i].omit = 1; + rCost /= 100.0; + } + if( (iPlan & 0x0000f0)==0 + && pConstraint->iColumn==CLOSURE_COL_DEPTH + && (pConstraint->op==SQLITE_INDEX_CONSTRAINT_LT + || pConstraint->op==SQLITE_INDEX_CONSTRAINT_LE + || pConstraint->op==SQLITE_INDEX_CONSTRAINT_EQ) + ){ + iPlan |= idx<<4; + pIdxInfo->aConstraintUsage[i].argvIndex = ++idx; + if( pConstraint->op==SQLITE_INDEX_CONSTRAINT_LT ) iPlan |= 0x000002; + rCost /= 5.0; + } + if( (iPlan & 0x000f00)==0 + && pConstraint->iColumn==CLOSURE_COL_TABLENAME + && pConstraint->op==SQLITE_INDEX_CONSTRAINT_EQ + ){ + iPlan |= idx<<8; + pIdxInfo->aConstraintUsage[i].argvIndex = ++idx; + pIdxInfo->aConstraintUsage[i].omit = 1; + rCost /= 5.0; + } + if( (iPlan & 0x00f000)==0 + && pConstraint->iColumn==CLOSURE_COL_IDCOLUMN + && pConstraint->op==SQLITE_INDEX_CONSTRAINT_EQ + ){ + iPlan |= idx<<12; + pIdxInfo->aConstraintUsage[i].argvIndex = ++idx; + pIdxInfo->aConstraintUsage[i].omit = 1; + } + if( (iPlan & 0x0f0000)==0 + && pConstraint->iColumn==CLOSURE_COL_PARENTCOLUMN + && pConstraint->op==SQLITE_INDEX_CONSTRAINT_EQ + ){ + iPlan |= idx<<16; + pIdxInfo->aConstraintUsage[i].argvIndex = ++idx; + pIdxInfo->aConstraintUsage[i].omit = 1; + } + } + if( (pVtab->zTableName==0 && (iPlan & 0x000f00)==0) + || (pVtab->zIdColumn==0 && (iPlan & 0x00f000)==0) + || (pVtab->zParentColumn==0 && (iPlan & 0x0f0000)==0) + ){ + /* All of tablename, idcolumn, and parentcolumn must be specified + ** in either the CREATE VIRTUAL TABLE or in the WHERE clause constraints + ** or else the result is an empty set. */ + iPlan = 0; + } + pIdxInfo->idxNum = iPlan; + if( pIdxInfo->nOrderBy==1 + && pIdxInfo->aOrderBy[0].iColumn==CLOSURE_COL_ID + && pIdxInfo->aOrderBy[0].desc==0 + ){ + pIdxInfo->orderByConsumed = 1; + } + if( seenMatch && (iPlan&1)==0 ) rCost *= 1e30; + pIdxInfo->estimatedCost = rCost; + + return SQLITE_OK; +} + +/* +** A virtual table module that implements the "transitive_closure". +*/ +static sqlite3_module closureModule = { + 0, /* iVersion */ + closureConnect, /* xCreate */ + closureConnect, /* xConnect */ + closureBestIndex, /* xBestIndex */ + closureDisconnect, /* xDisconnect */ + closureDisconnect, /* xDestroy */ + closureOpen, /* xOpen - open a cursor */ + closureClose, /* xClose - close a cursor */ + closureFilter, /* xFilter - configure scan constraints */ + closureNext, /* xNext - advance a cursor */ + closureEof, /* xEof - check for end of scan */ + closureColumn, /* xColumn - read data */ + closureRowid, /* xRowid - read data */ + 0, /* xUpdate */ + 0, /* xBegin */ + 0, /* xSync */ + 0, /* xCommit */ + 0, /* xRollback */ + 0, /* xFindMethod */ + 0, /* xRename */ + 0, /* xSavepoint */ + 0, /* xRelease */ + 0 /* xRollbackTo */ +}; + +#endif /* SQLITE_OMIT_VIRTUALTABLE */ + +/* +** Register the closure virtual table +*/ +#ifdef _WIN32 +__declspec(dllexport) +#endif +int sqlite3_closure_init( + sqlite3 *db, + char **pzErrMsg, + const sqlite3_api_routines *pApi +){ + int rc = SQLITE_OK; + SQLITE_EXTENSION_INIT2(pApi); + (void)pzErrMsg; +#ifndef SQLITE_OMIT_VIRTUALTABLE + rc = sqlite3_create_module(db, "transitive_closure", &closureModule, 0); +#endif /* SQLITE_OMIT_VIRTUALTABLE */ + return rc; +} ADDED ext/misc/fuzzer.c Index: ext/misc/fuzzer.c ================================================================== --- ext/misc/fuzzer.c +++ ext/misc/fuzzer.c @@ -0,0 +1,1184 @@ +/* +** 2011 March 24 +** +** The author disclaims copyright to this source code. In place of +** a legal notice, here is a blessing: +** +** May you do good and not evil. +** May you find forgiveness for yourself and forgive others. +** May you share freely, never taking more than you give. +** +************************************************************************* +** +** Code for a demonstration virtual table that generates variations +** on an input word at increasing edit distances from the original. +** +** A fuzzer virtual table is created like this: +** +** CREATE VIRTUAL TABLE f USING fuzzer(); +** +** When it is created, the new fuzzer table must be supplied with the +** name of a "fuzzer data table", which must reside in the same database +** file as the new fuzzer table. The fuzzer data table contains the various +** transformations and their costs that the fuzzer logic uses to generate +** variations. +** +** The fuzzer data table must contain exactly four columns (more precisely, +** the statement "SELECT * FROM " must return records +** that consist of four columns). It does not matter what the columns are +** named. +** +** Each row in the fuzzer data table represents a single character +** transformation. The left most column of the row (column 0) contains an +** integer value - the identifier of the ruleset to which the transformation +** rule belongs (see "MULTIPLE RULE SETS" below). The second column of the +** row (column 0) contains the input character or characters. The third +** column contains the output character or characters. And the fourth column +** contains the integer cost of making the transformation. For example: +** +** CREATE TABLE f_data(ruleset, cFrom, cTo, Cost); +** INSERT INTO f_data(ruleset, cFrom, cTo, Cost) VALUES(0, '', 'a', 100); +** INSERT INTO f_data(ruleset, cFrom, cTo, Cost) VALUES(0, 'b', '', 87); +** INSERT INTO f_data(ruleset, cFrom, cTo, Cost) VALUES(0, 'o', 'oe', 38); +** INSERT INTO f_data(ruleset, cFrom, cTo, Cost) VALUES(0, 'oe', 'o', 40); +** +** The first row inserted into the fuzzer data table by the SQL script +** above indicates that the cost of inserting a letter 'a' is 100. (All +** costs are integers. We recommend that costs be scaled so that the +** average cost is around 100.) The second INSERT statement creates a rule +** saying that the cost of deleting a single letter 'b' is 87. The third +** and fourth INSERT statements mean that the cost of transforming a +** single letter "o" into the two-letter sequence "oe" is 38 and that the +** cost of transforming "oe" back into "o" is 40. +** +** The contents of the fuzzer data table are loaded into main memory when +** a fuzzer table is first created, and may be internally reloaded by the +** system at any subsequent time. Therefore, the fuzzer data table should be +** populated before the fuzzer table is created and not modified thereafter. +** If you do need to modify the contents of the fuzzer data table, it is +** recommended that the associated fuzzer table be dropped, the fuzzer data +** table edited, and the fuzzer table recreated within a single transaction. +** Alternatively, the fuzzer data table can be edited then the database +** connection can be closed and reopened. +** +** Once it has been created, the fuzzer table can be queried as follows: +** +** SELECT word, distance FROM f +** WHERE word MATCH 'abcdefg' +** AND distance<200; +** +** This first query outputs the string "abcdefg" and all strings that +** can be derived from that string by appling the specified transformations. +** The strings are output together with their total transformation cost +** (called "distance") and appear in order of increasing cost. No string +** is output more than once. If there are multiple ways to transform the +** target string into the output string then the lowest cost transform is +** the one that is returned. In the example, the search is limited to +** strings with a total distance of less than 200. +** +** The fuzzer is a read-only table. Any attempt to DELETE, INSERT, or +** UPDATE on a fuzzer table will throw an error. +** +** It is important to put some kind of a limit on the fuzzer output. This +** can be either in the form of a LIMIT clause at the end of the query, +** or better, a "distance +#include +#include +#include + +#ifndef SQLITE_OMIT_VIRTUALTABLE + +/* +** Forward declaration of objects used by this implementation +*/ +typedef struct fuzzer_vtab fuzzer_vtab; +typedef struct fuzzer_cursor fuzzer_cursor; +typedef struct fuzzer_rule fuzzer_rule; +typedef struct fuzzer_seen fuzzer_seen; +typedef struct fuzzer_stem fuzzer_stem; + +/* +** Various types. +** +** fuzzer_cost is the "cost" of an edit operation. +** +** fuzzer_len is the length of a matching string. +** +** fuzzer_ruleid is an ruleset identifier. +*/ +typedef int fuzzer_cost; +typedef signed char fuzzer_len; +typedef int fuzzer_ruleid; + +/* +** Limits +*/ +#define FUZZER_MX_LENGTH 50 /* Maximum length of a rule string */ +#define FUZZER_MX_RULEID 2147483647 /* Maximum rule ID */ +#define FUZZER_MX_COST 1000 /* Maximum single-rule cost */ +#define FUZZER_MX_OUTPUT_LENGTH 100 /* Maximum length of an output string */ + + +/* +** Each transformation rule is stored as an instance of this object. +** All rules are kept on a linked list sorted by rCost. +*/ +struct fuzzer_rule { + fuzzer_rule *pNext; /* Next rule in order of increasing rCost */ + char *zFrom; /* Transform from */ + fuzzer_cost rCost; /* Cost of this transformation */ + fuzzer_len nFrom, nTo; /* Length of the zFrom and zTo strings */ + fuzzer_ruleid iRuleset; /* The rule set to which this rule belongs */ + char zTo[4]; /* Transform to (extra space appended) */ +}; + +/* +** A stem object is used to generate variants. It is also used to record +** previously generated outputs. +** +** Every stem is added to a hash table as it is output. Generation of +** duplicate stems is suppressed. +** +** Active stems (those that might generate new outputs) are kepts on a linked +** list sorted by increasing cost. The cost is the sum of rBaseCost and +** pRule->rCost. +*/ +struct fuzzer_stem { + char *zBasis; /* Word being fuzzed */ + const fuzzer_rule *pRule; /* Current rule to apply */ + fuzzer_stem *pNext; /* Next stem in rCost order */ + fuzzer_stem *pHash; /* Next stem with same hash on zBasis */ + fuzzer_cost rBaseCost; /* Base cost of getting to zBasis */ + fuzzer_cost rCostX; /* Precomputed rBaseCost + pRule->rCost */ + fuzzer_len nBasis; /* Length of the zBasis string */ + fuzzer_len n; /* Apply pRule at this character offset */ +}; + +/* +** A fuzzer virtual-table object +*/ +struct fuzzer_vtab { + sqlite3_vtab base; /* Base class - must be first */ + char *zClassName; /* Name of this class. Default: "fuzzer" */ + fuzzer_rule *pRule; /* All active rules in this fuzzer */ + int nCursor; /* Number of active cursors */ +}; + +#define FUZZER_HASH 4001 /* Hash table size */ +#define FUZZER_NQUEUE 20 /* Number of slots on the stem queue */ + +/* A fuzzer cursor object */ +struct fuzzer_cursor { + sqlite3_vtab_cursor base; /* Base class - must be first */ + sqlite3_int64 iRowid; /* The rowid of the current word */ + fuzzer_vtab *pVtab; /* The virtual table this cursor belongs to */ + fuzzer_cost rLimit; /* Maximum cost of any term */ + fuzzer_stem *pStem; /* Stem with smallest rCostX */ + fuzzer_stem *pDone; /* Stems already processed to completion */ + fuzzer_stem *aQueue[FUZZER_NQUEUE]; /* Queue of stems with higher rCostX */ + int mxQueue; /* Largest used index in aQueue[] */ + char *zBuf; /* Temporary use buffer */ + int nBuf; /* Bytes allocated for zBuf */ + int nStem; /* Number of stems allocated */ + int iRuleset; /* Only process rules from this ruleset */ + fuzzer_rule nullRule; /* Null rule used first */ + fuzzer_stem *apHash[FUZZER_HASH]; /* Hash of previously generated terms */ +}; + +/* +** The two input rule lists are both sorted in order of increasing +** cost. Merge them together into a single list, sorted by cost, and +** return a pointer to the head of that list. +*/ +static fuzzer_rule *fuzzerMergeRules(fuzzer_rule *pA, fuzzer_rule *pB){ + fuzzer_rule head; + fuzzer_rule *pTail; + + pTail = &head; + while( pA && pB ){ + if( pA->rCost<=pB->rCost ){ + pTail->pNext = pA; + pTail = pA; + pA = pA->pNext; + }else{ + pTail->pNext = pB; + pTail = pB; + pB = pB->pNext; + } + } + if( pA==0 ){ + pTail->pNext = pB; + }else{ + pTail->pNext = pA; + } + return head.pNext; +} + +/* +** Statement pStmt currently points to a row in the fuzzer data table. This +** function allocates and populates a fuzzer_rule structure according to +** the content of the row. +** +** If successful, *ppRule is set to point to the new object and SQLITE_OK +** is returned. Otherwise, *ppRule is zeroed, *pzErr may be set to point +** to an error message and an SQLite error code returned. +*/ +static int fuzzerLoadOneRule( + fuzzer_vtab *p, /* Fuzzer virtual table handle */ + sqlite3_stmt *pStmt, /* Base rule on statements current row */ + fuzzer_rule **ppRule, /* OUT: New rule object */ + char **pzErr /* OUT: Error message */ +){ + sqlite3_int64 iRuleset = sqlite3_column_int64(pStmt, 0); + const char *zFrom = (const char *)sqlite3_column_text(pStmt, 1); + const char *zTo = (const char *)sqlite3_column_text(pStmt, 2); + int nCost = sqlite3_column_int(pStmt, 3); + + int rc = SQLITE_OK; /* Return code */ + int nFrom; /* Size of string zFrom, in bytes */ + int nTo; /* Size of string zTo, in bytes */ + fuzzer_rule *pRule = 0; /* New rule object to return */ + + if( zFrom==0 ) zFrom = ""; + if( zTo==0 ) zTo = ""; + nFrom = (int)strlen(zFrom); + nTo = (int)strlen(zTo); + + /* Silently ignore null transformations */ + if( strcmp(zFrom, zTo)==0 ){ + *ppRule = 0; + return SQLITE_OK; + } + + if( nCost<=0 || nCost>FUZZER_MX_COST ){ + *pzErr = sqlite3_mprintf("%s: cost must be between 1 and %d", + p->zClassName, FUZZER_MX_COST + ); + rc = SQLITE_ERROR; + }else + if( nFrom>FUZZER_MX_LENGTH || nTo>FUZZER_MX_LENGTH ){ + *pzErr = sqlite3_mprintf("%s: maximum string length is %d", + p->zClassName, FUZZER_MX_LENGTH + ); + rc = SQLITE_ERROR; + }else + if( iRuleset<0 || iRuleset>FUZZER_MX_RULEID ){ + *pzErr = sqlite3_mprintf("%s: ruleset must be between 0 and %d", + p->zClassName, FUZZER_MX_RULEID + ); + rc = SQLITE_ERROR; + }else{ + + pRule = sqlite3_malloc( sizeof(*pRule) + nFrom + nTo ); + if( pRule==0 ){ + rc = SQLITE_NOMEM; + }else{ + memset(pRule, 0, sizeof(*pRule)); + pRule->zFrom = &pRule->zTo[nTo+1]; + pRule->nFrom = nFrom; + memcpy(pRule->zFrom, zFrom, nFrom+1); + memcpy(pRule->zTo, zTo, nTo+1); + pRule->nTo = nTo; + pRule->rCost = nCost; + pRule->iRuleset = (int)iRuleset; + } + } + + *ppRule = pRule; + return rc; +} + +/* +** Load the content of the fuzzer data table into memory. +*/ +static int fuzzerLoadRules( + sqlite3 *db, /* Database handle */ + fuzzer_vtab *p, /* Virtual fuzzer table to configure */ + const char *zDb, /* Database containing rules data */ + const char *zData, /* Table containing rules data */ + char **pzErr /* OUT: Error message */ +){ + int rc = SQLITE_OK; /* Return code */ + char *zSql; /* SELECT used to read from rules table */ + fuzzer_rule *pHead = 0; + + zSql = sqlite3_mprintf("SELECT * FROM %Q.%Q", zDb, zData); + if( zSql==0 ){ + rc = SQLITE_NOMEM; + }else{ + int rc2; /* finalize() return code */ + sqlite3_stmt *pStmt = 0; + rc = sqlite3_prepare_v2(db, zSql, -1, &pStmt, 0); + if( rc!=SQLITE_OK ){ + *pzErr = sqlite3_mprintf("%s: %s", p->zClassName, sqlite3_errmsg(db)); + }else if( sqlite3_column_count(pStmt)!=4 ){ + *pzErr = sqlite3_mprintf("%s: %s has %d columns, expected 4", + p->zClassName, zData, sqlite3_column_count(pStmt) + ); + rc = SQLITE_ERROR; + }else{ + while( rc==SQLITE_OK && SQLITE_ROW==sqlite3_step(pStmt) ){ + fuzzer_rule *pRule = 0; + rc = fuzzerLoadOneRule(p, pStmt, &pRule, pzErr); + if( pRule ){ + pRule->pNext = pHead; + pHead = pRule; + } + } + } + rc2 = sqlite3_finalize(pStmt); + if( rc==SQLITE_OK ) rc = rc2; + } + sqlite3_free(zSql); + + /* All rules are now in a singly linked list starting at pHead. This + ** block sorts them by cost and then sets fuzzer_vtab.pRule to point to + ** point to the head of the sorted list. + */ + if( rc==SQLITE_OK ){ + unsigned int i; + fuzzer_rule *pX; + fuzzer_rule *a[15]; + for(i=0; ipNext; + pX->pNext = 0; + for(i=0; a[i] && ipRule = fuzzerMergeRules(p->pRule, pX); + }else{ + /* An error has occurred. Setting p->pRule to point to the head of the + ** allocated list ensures that the list will be cleaned up in this case. + */ + assert( p->pRule==0 ); + p->pRule = pHead; + } + + return rc; +} + +/* +** This function converts an SQL quoted string into an unquoted string +** and returns a pointer to a buffer allocated using sqlite3_malloc() +** containing the result. The caller should eventually free this buffer +** using sqlite3_free. +** +** Examples: +** +** "abc" becomes abc +** 'xyz' becomes xyz +** [pqr] becomes pqr +** `mno` becomes mno +*/ +static char *fuzzerDequote(const char *zIn){ + int nIn; /* Size of input string, in bytes */ + char *zOut; /* Output (dequoted) string */ + + nIn = (int)strlen(zIn); + zOut = sqlite3_malloc(nIn+1); + if( zOut ){ + char q = zIn[0]; /* Quote character (if any ) */ + + if( q!='[' && q!= '\'' && q!='"' && q!='`' ){ + memcpy(zOut, zIn, nIn+1); + }else{ + int iOut = 0; /* Index of next byte to write to output */ + int iIn; /* Index of next byte to read from input */ + + if( q=='[' ) q = ']'; + for(iIn=1; iInnCursor==0 ); + while( p->pRule ){ + fuzzer_rule *pRule = p->pRule; + p->pRule = pRule->pNext; + sqlite3_free(pRule); + } + sqlite3_free(p); + return SQLITE_OK; +} + +/* +** xConnect/xCreate method for the fuzzer module. Arguments are: +** +** argv[0] -> module name ("fuzzer") +** argv[1] -> database name +** argv[2] -> table name +** argv[3] -> fuzzer rule table name +*/ +static int fuzzerConnect( + sqlite3 *db, + void *pAux, + int argc, const char *const*argv, + sqlite3_vtab **ppVtab, + char **pzErr +){ + int rc = SQLITE_OK; /* Return code */ + fuzzer_vtab *pNew = 0; /* New virtual table */ + const char *zModule = argv[0]; + const char *zDb = argv[1]; + + if( argc!=4 ){ + *pzErr = sqlite3_mprintf( + "%s: wrong number of CREATE VIRTUAL TABLE arguments", zModule + ); + rc = SQLITE_ERROR; + }else{ + int nModule; /* Length of zModule, in bytes */ + + nModule = (int)strlen(zModule); + pNew = sqlite3_malloc( sizeof(*pNew) + nModule + 1); + if( pNew==0 ){ + rc = SQLITE_NOMEM; + }else{ + char *zTab; /* Dequoted name of fuzzer data table */ + + memset(pNew, 0, sizeof(*pNew)); + pNew->zClassName = (char*)&pNew[1]; + memcpy(pNew->zClassName, zModule, nModule+1); + + zTab = fuzzerDequote(argv[3]); + if( zTab==0 ){ + rc = SQLITE_NOMEM; + }else{ + rc = fuzzerLoadRules(db, pNew, zDb, zTab, pzErr); + sqlite3_free(zTab); + } + + if( rc==SQLITE_OK ){ + rc = sqlite3_declare_vtab(db, "CREATE TABLE x(word,distance,ruleset)"); + } + if( rc!=SQLITE_OK ){ + fuzzerDisconnect((sqlite3_vtab *)pNew); + pNew = 0; + } + } + } + + *ppVtab = (sqlite3_vtab *)pNew; + return rc; +} + +/* +** Open a new fuzzer cursor. +*/ +static int fuzzerOpen(sqlite3_vtab *pVTab, sqlite3_vtab_cursor **ppCursor){ + fuzzer_vtab *p = (fuzzer_vtab*)pVTab; + fuzzer_cursor *pCur; + pCur = sqlite3_malloc( sizeof(*pCur) ); + if( pCur==0 ) return SQLITE_NOMEM; + memset(pCur, 0, sizeof(*pCur)); + pCur->pVtab = p; + *ppCursor = &pCur->base; + p->nCursor++; + return SQLITE_OK; +} + +/* +** Free all stems in a list. +*/ +static void fuzzerClearStemList(fuzzer_stem *pStem){ + while( pStem ){ + fuzzer_stem *pNext = pStem->pNext; + sqlite3_free(pStem); + pStem = pNext; + } +} + +/* +** Free up all the memory allocated by a cursor. Set it rLimit to 0 +** to indicate that it is at EOF. +*/ +static void fuzzerClearCursor(fuzzer_cursor *pCur, int clearHash){ + int i; + fuzzerClearStemList(pCur->pStem); + fuzzerClearStemList(pCur->pDone); + for(i=0; iaQueue[i]); + pCur->rLimit = (fuzzer_cost)0; + if( clearHash && pCur->nStem ){ + pCur->mxQueue = 0; + pCur->pStem = 0; + pCur->pDone = 0; + memset(pCur->aQueue, 0, sizeof(pCur->aQueue)); + memset(pCur->apHash, 0, sizeof(pCur->apHash)); + } + pCur->nStem = 0; +} + +/* +** Close a fuzzer cursor. +*/ +static int fuzzerClose(sqlite3_vtab_cursor *cur){ + fuzzer_cursor *pCur = (fuzzer_cursor *)cur; + fuzzerClearCursor(pCur, 0); + sqlite3_free(pCur->zBuf); + pCur->pVtab->nCursor--; + sqlite3_free(pCur); + return SQLITE_OK; +} + +/* +** Compute the current output term for a fuzzer_stem. +*/ +static int fuzzerRender( + fuzzer_stem *pStem, /* The stem to be rendered */ + char **pzBuf, /* Write results into this buffer. realloc if needed */ + int *pnBuf /* Size of the buffer */ +){ + const fuzzer_rule *pRule = pStem->pRule; + int n; /* Size of output term without nul-term */ + char *z; /* Buffer to assemble output term in */ + + n = pStem->nBasis + pRule->nTo - pRule->nFrom; + if( (*pnBuf)n; + z = *pzBuf; + if( n<0 ){ + memcpy(z, pStem->zBasis, pStem->nBasis+1); + }else{ + memcpy(z, pStem->zBasis, n); + memcpy(&z[n], pRule->zTo, pRule->nTo); + memcpy(&z[n+pRule->nTo], &pStem->zBasis[n+pRule->nFrom], + pStem->nBasis-n-pRule->nFrom+1); + } + + assert( z[pStem->nBasis + pRule->nTo - pRule->nFrom]==0 ); + return SQLITE_OK; +} + +/* +** Compute a hash on zBasis. +*/ +static unsigned int fuzzerHash(const char *z){ + unsigned int h = 0; + while( *z ){ h = (h<<3) ^ (h>>29) ^ *(z++); } + return h % FUZZER_HASH; +} + +/* +** Current cost of a stem +*/ +static fuzzer_cost fuzzerCost(fuzzer_stem *pStem){ + return pStem->rCostX = pStem->rBaseCost + pStem->pRule->rCost; +} + +#if 0 +/* +** Print a description of a fuzzer_stem on stderr. +*/ +static void fuzzerStemPrint( + const char *zPrefix, + fuzzer_stem *pStem, + const char *zSuffix +){ + if( pStem->n<0 ){ + fprintf(stderr, "%s[%s](%d)-->self%s", + zPrefix, + pStem->zBasis, pStem->rBaseCost, + zSuffix + ); + }else{ + char *zBuf = 0; + int nBuf = 0; + if( fuzzerRender(pStem, &zBuf, &nBuf)!=SQLITE_OK ) return; + fprintf(stderr, "%s[%s](%d)-->{%s}(%d)%s", + zPrefix, + pStem->zBasis, pStem->rBaseCost, zBuf, pStem->, + zSuffix + ); + sqlite3_free(zBuf); + } +} +#endif + +/* +** Return 1 if the string to which the cursor is point has already +** been emitted. Return 0 if not. Return -1 on a memory allocation +** failures. +*/ +static int fuzzerSeen(fuzzer_cursor *pCur, fuzzer_stem *pStem){ + unsigned int h; + fuzzer_stem *pLookup; + + if( fuzzerRender(pStem, &pCur->zBuf, &pCur->nBuf)==SQLITE_NOMEM ){ + return -1; + } + h = fuzzerHash(pCur->zBuf); + pLookup = pCur->apHash[h]; + while( pLookup && strcmp(pLookup->zBasis, pCur->zBuf)!=0 ){ + pLookup = pLookup->pHash; + } + return pLookup!=0; +} + +/* +** If argument pRule is NULL, this function returns false. +** +** Otherwise, it returns true if rule pRule should be skipped. A rule +** should be skipped if it does not belong to rule-set iRuleset, or if +** applying it to stem pStem would create a string longer than +** FUZZER_MX_OUTPUT_LENGTH bytes. +*/ +static int fuzzerSkipRule( + const fuzzer_rule *pRule, /* Determine whether or not to skip this */ + fuzzer_stem *pStem, /* Stem rule may be applied to */ + int iRuleset /* Rule-set used by the current query */ +){ + return pRule && ( + (pRule->iRuleset!=iRuleset) + || (pStem->nBasis + pRule->nTo - pRule->nFrom)>FUZZER_MX_OUTPUT_LENGTH + ); +} + +/* +** Advance a fuzzer_stem to its next value. Return 0 if there are +** no more values that can be generated by this fuzzer_stem. Return +** -1 on a memory allocation failure. +*/ +static int fuzzerAdvance(fuzzer_cursor *pCur, fuzzer_stem *pStem){ + const fuzzer_rule *pRule; + while( (pRule = pStem->pRule)!=0 ){ + assert( pRule==&pCur->nullRule || pRule->iRuleset==pCur->iRuleset ); + while( pStem->n < pStem->nBasis - pRule->nFrom ){ + pStem->n++; + if( pRule->nFrom==0 + || memcmp(&pStem->zBasis[pStem->n], pRule->zFrom, pRule->nFrom)==0 + ){ + /* Found a rewrite case. Make sure it is not a duplicate */ + int rc = fuzzerSeen(pCur, pStem); + if( rc<0 ) return -1; + if( rc==0 ){ + fuzzerCost(pStem); + return 1; + } + } + } + pStem->n = -1; + do{ + pRule = pRule->pNext; + }while( fuzzerSkipRule(pRule, pStem, pCur->iRuleset) ); + pStem->pRule = pRule; + if( pRule && fuzzerCost(pStem)>pCur->rLimit ) pStem->pRule = 0; + } + return 0; +} + +/* +** The two input stem lists are both sorted in order of increasing +** rCostX. Merge them together into a single list, sorted by rCostX, and +** return a pointer to the head of that new list. +*/ +static fuzzer_stem *fuzzerMergeStems(fuzzer_stem *pA, fuzzer_stem *pB){ + fuzzer_stem head; + fuzzer_stem *pTail; + + pTail = &head; + while( pA && pB ){ + if( pA->rCostX<=pB->rCostX ){ + pTail->pNext = pA; + pTail = pA; + pA = pA->pNext; + }else{ + pTail->pNext = pB; + pTail = pB; + pB = pB->pNext; + } + } + if( pA==0 ){ + pTail->pNext = pB; + }else{ + pTail->pNext = pA; + } + return head.pNext; +} + +/* +** Load pCur->pStem with the lowest-cost stem. Return a pointer +** to the lowest-cost stem. +*/ +static fuzzer_stem *fuzzerLowestCostStem(fuzzer_cursor *pCur){ + fuzzer_stem *pBest, *pX; + int iBest; + int i; + + if( pCur->pStem==0 ){ + iBest = -1; + pBest = 0; + for(i=0; i<=pCur->mxQueue; i++){ + pX = pCur->aQueue[i]; + if( pX==0 ) continue; + if( pBest==0 || pBest->rCostX>pX->rCostX ){ + pBest = pX; + iBest = i; + } + } + if( pBest ){ + pCur->aQueue[iBest] = pBest->pNext; + pBest->pNext = 0; + pCur->pStem = pBest; + } + } + return pCur->pStem; +} + +/* +** Insert pNew into queue of pending stems. Then find the stem +** with the lowest rCostX and move it into pCur->pStem. +** list. The insert is done such the pNew is in the correct order +** according to fuzzer_stem.zBaseCost+fuzzer_stem.pRule->rCost. +*/ +static fuzzer_stem *fuzzerInsert(fuzzer_cursor *pCur, fuzzer_stem *pNew){ + fuzzer_stem *pX; + int i; + + /* If pCur->pStem exists and is greater than pNew, then make pNew + ** the new pCur->pStem and insert the old pCur->pStem instead. + */ + if( (pX = pCur->pStem)!=0 && pX->rCostX>pNew->rCostX ){ + pNew->pNext = 0; + pCur->pStem = pNew; + pNew = pX; + } + + /* Insert the new value */ + pNew->pNext = 0; + pX = pNew; + for(i=0; i<=pCur->mxQueue; i++){ + if( pCur->aQueue[i] ){ + pX = fuzzerMergeStems(pX, pCur->aQueue[i]); + pCur->aQueue[i] = 0; + }else{ + pCur->aQueue[i] = pX; + break; + } + } + if( i>pCur->mxQueue ){ + if( imxQueue = i; + pCur->aQueue[i] = pX; + }else{ + assert( pCur->mxQueue==FUZZER_NQUEUE-1 ); + pX = fuzzerMergeStems(pX, pCur->aQueue[FUZZER_NQUEUE-1]); + pCur->aQueue[FUZZER_NQUEUE-1] = pX; + } + } + + return fuzzerLowestCostStem(pCur); +} + +/* +** Allocate a new fuzzer_stem. Add it to the hash table but do not +** link it into either the pCur->pStem or pCur->pDone lists. +*/ +static fuzzer_stem *fuzzerNewStem( + fuzzer_cursor *pCur, + const char *zWord, + fuzzer_cost rBaseCost +){ + fuzzer_stem *pNew; + fuzzer_rule *pRule; + unsigned int h; + + pNew = sqlite3_malloc( sizeof(*pNew) + (int)strlen(zWord) + 1 ); + if( pNew==0 ) return 0; + memset(pNew, 0, sizeof(*pNew)); + pNew->zBasis = (char*)&pNew[1]; + pNew->nBasis = (int)strlen(zWord); + memcpy(pNew->zBasis, zWord, pNew->nBasis+1); + pRule = pCur->pVtab->pRule; + while( fuzzerSkipRule(pRule, pNew, pCur->iRuleset) ){ + pRule = pRule->pNext; + } + pNew->pRule = pRule; + pNew->n = -1; + pNew->rBaseCost = pNew->rCostX = rBaseCost; + h = fuzzerHash(pNew->zBasis); + pNew->pHash = pCur->apHash[h]; + pCur->apHash[h] = pNew; + pCur->nStem++; + return pNew; +} + + +/* +** Advance a cursor to its next row of output +*/ +static int fuzzerNext(sqlite3_vtab_cursor *cur){ + fuzzer_cursor *pCur = (fuzzer_cursor*)cur; + int rc; + fuzzer_stem *pStem, *pNew; + + pCur->iRowid++; + + /* Use the element the cursor is currently point to to create + ** a new stem and insert the new stem into the priority queue. + */ + pStem = pCur->pStem; + if( pStem->rCostX>0 ){ + rc = fuzzerRender(pStem, &pCur->zBuf, &pCur->nBuf); + if( rc==SQLITE_NOMEM ) return SQLITE_NOMEM; + pNew = fuzzerNewStem(pCur, pCur->zBuf, pStem->rCostX); + if( pNew ){ + if( fuzzerAdvance(pCur, pNew)==0 ){ + pNew->pNext = pCur->pDone; + pCur->pDone = pNew; + }else{ + if( fuzzerInsert(pCur, pNew)==pNew ){ + return SQLITE_OK; + } + } + }else{ + return SQLITE_NOMEM; + } + } + + /* Adjust the priority queue so that the first element of the + ** stem list is the next lowest cost word. + */ + while( (pStem = pCur->pStem)!=0 ){ + int res = fuzzerAdvance(pCur, pStem); + if( res<0 ){ + return SQLITE_NOMEM; + }else if( res>0 ){ + pCur->pStem = 0; + pStem = fuzzerInsert(pCur, pStem); + if( (rc = fuzzerSeen(pCur, pStem))!=0 ){ + if( rc<0 ) return SQLITE_NOMEM; + continue; + } + return SQLITE_OK; /* New word found */ + } + pCur->pStem = 0; + pStem->pNext = pCur->pDone; + pCur->pDone = pStem; + if( fuzzerLowestCostStem(pCur) ){ + rc = fuzzerSeen(pCur, pCur->pStem); + if( rc<0 ) return SQLITE_NOMEM; + if( rc==0 ){ + return SQLITE_OK; + } + } + } + + /* Reach this point only if queue has been exhausted and there is + ** nothing left to be output. */ + pCur->rLimit = (fuzzer_cost)0; + return SQLITE_OK; +} + +/* +** Called to "rewind" a cursor back to the beginning so that +** it starts its output over again. Always called at least once +** prior to any fuzzerColumn, fuzzerRowid, or fuzzerEof call. +*/ +static int fuzzerFilter( + sqlite3_vtab_cursor *pVtabCursor, + int idxNum, const char *idxStr, + int argc, sqlite3_value **argv +){ + fuzzer_cursor *pCur = (fuzzer_cursor *)pVtabCursor; + const char *zWord = ""; + fuzzer_stem *pStem; + int idx; + + fuzzerClearCursor(pCur, 1); + pCur->rLimit = 2147483647; + idx = 0; + if( idxNum & 1 ){ + zWord = (const char*)sqlite3_value_text(argv[0]); + idx++; + } + if( idxNum & 2 ){ + pCur->rLimit = (fuzzer_cost)sqlite3_value_int(argv[idx]); + idx++; + } + if( idxNum & 4 ){ + pCur->iRuleset = (fuzzer_cost)sqlite3_value_int(argv[idx]); + idx++; + } + pCur->nullRule.pNext = pCur->pVtab->pRule; + pCur->nullRule.rCost = 0; + pCur->nullRule.nFrom = 0; + pCur->nullRule.nTo = 0; + pCur->nullRule.zFrom = ""; + pCur->iRowid = 1; + assert( pCur->pStem==0 ); + + /* If the query term is longer than FUZZER_MX_OUTPUT_LENGTH bytes, this + ** query will return zero rows. */ + if( (int)strlen(zWord)pStem = pStem = fuzzerNewStem(pCur, zWord, (fuzzer_cost)0); + if( pStem==0 ) return SQLITE_NOMEM; + pStem->pRule = &pCur->nullRule; + pStem->n = pStem->nBasis; + }else{ + pCur->rLimit = 0; + } + + return SQLITE_OK; +} + +/* +** Only the word and distance columns have values. All other columns +** return NULL +*/ +static int fuzzerColumn(sqlite3_vtab_cursor *cur, sqlite3_context *ctx, int i){ + fuzzer_cursor *pCur = (fuzzer_cursor*)cur; + if( i==0 ){ + /* the "word" column */ + if( fuzzerRender(pCur->pStem, &pCur->zBuf, &pCur->nBuf)==SQLITE_NOMEM ){ + return SQLITE_NOMEM; + } + sqlite3_result_text(ctx, pCur->zBuf, -1, SQLITE_TRANSIENT); + }else if( i==1 ){ + /* the "distance" column */ + sqlite3_result_int(ctx, pCur->pStem->rCostX); + }else{ + /* All other columns are NULL */ + sqlite3_result_null(ctx); + } + return SQLITE_OK; +} + +/* +** The rowid. +*/ +static int fuzzerRowid(sqlite3_vtab_cursor *cur, sqlite_int64 *pRowid){ + fuzzer_cursor *pCur = (fuzzer_cursor*)cur; + *pRowid = pCur->iRowid; + return SQLITE_OK; +} + +/* +** When the fuzzer_cursor.rLimit value is 0 or less, that is a signal +** that the cursor has nothing more to output. +*/ +static int fuzzerEof(sqlite3_vtab_cursor *cur){ + fuzzer_cursor *pCur = (fuzzer_cursor*)cur; + return pCur->rLimit<=(fuzzer_cost)0; +} + +/* +** Search for terms of these forms: +** +** (A) word MATCH $str +** (B1) distance < $value +** (B2) distance <= $value +** (C) ruleid == $ruleid +** +** The distance< and distance<= are both treated as distance<=. +** The query plan number is a bit vector: +** +** bit 1: Term of the form (A) found +** bit 2: Term like (B1) or (B2) found +** bit 3: Term like (C) found +** +** If bit-1 is set, $str is always in filter.argv[0]. If bit-2 is set +** then $value is in filter.argv[0] if bit-1 is clear and is in +** filter.argv[1] if bit-1 is set. If bit-3 is set, then $ruleid is +** in filter.argv[0] if bit-1 and bit-2 are both zero, is in +** filter.argv[1] if exactly one of bit-1 and bit-2 are set, and is in +** filter.argv[2] if both bit-1 and bit-2 are set. +*/ +static int fuzzerBestIndex(sqlite3_vtab *tab, sqlite3_index_info *pIdxInfo){ + int iPlan = 0; + int iDistTerm = -1; + int iRulesetTerm = -1; + int i; + int seenMatch = 0; + const struct sqlite3_index_constraint *pConstraint; + double rCost = 1e12; + + pConstraint = pIdxInfo->aConstraint; + for(i=0; inConstraint; i++, pConstraint++){ + if( pConstraint->iColumn==0 + && pConstraint->op==SQLITE_INDEX_CONSTRAINT_MATCH ){ + seenMatch = 1; + } + if( pConstraint->usable==0 ) continue; + if( (iPlan & 1)==0 + && pConstraint->iColumn==0 + && pConstraint->op==SQLITE_INDEX_CONSTRAINT_MATCH + ){ + iPlan |= 1; + pIdxInfo->aConstraintUsage[i].argvIndex = 1; + pIdxInfo->aConstraintUsage[i].omit = 1; + rCost /= 1e6; + } + if( (iPlan & 2)==0 + && pConstraint->iColumn==1 + && (pConstraint->op==SQLITE_INDEX_CONSTRAINT_LT + || pConstraint->op==SQLITE_INDEX_CONSTRAINT_LE) + ){ + iPlan |= 2; + iDistTerm = i; + rCost /= 10.0; + } + if( (iPlan & 4)==0 + && pConstraint->iColumn==2 + && pConstraint->op==SQLITE_INDEX_CONSTRAINT_EQ + ){ + iPlan |= 4; + pIdxInfo->aConstraintUsage[i].omit = 1; + iRulesetTerm = i; + rCost /= 10.0; + } + } + if( iPlan & 2 ){ + pIdxInfo->aConstraintUsage[iDistTerm].argvIndex = 1+((iPlan&1)!=0); + } + if( iPlan & 4 ){ + int idx = 1; + if( iPlan & 1 ) idx++; + if( iPlan & 2 ) idx++; + pIdxInfo->aConstraintUsage[iRulesetTerm].argvIndex = idx; + } + pIdxInfo->idxNum = iPlan; + if( pIdxInfo->nOrderBy==1 + && pIdxInfo->aOrderBy[0].iColumn==1 + && pIdxInfo->aOrderBy[0].desc==0 + ){ + pIdxInfo->orderByConsumed = 1; + } + if( seenMatch && (iPlan&1)==0 ) rCost = 1e99; + pIdxInfo->estimatedCost = rCost; + + return SQLITE_OK; +} + +/* +** A virtual table module that implements the "fuzzer". +*/ +static sqlite3_module fuzzerModule = { + 0, /* iVersion */ + fuzzerConnect, + fuzzerConnect, + fuzzerBestIndex, + fuzzerDisconnect, + fuzzerDisconnect, + fuzzerOpen, /* xOpen - open a cursor */ + fuzzerClose, /* xClose - close a cursor */ + fuzzerFilter, /* xFilter - configure scan constraints */ + fuzzerNext, /* xNext - advance a cursor */ + fuzzerEof, /* xEof - check for end of scan */ + fuzzerColumn, /* xColumn - read data */ + fuzzerRowid, /* xRowid - read data */ + 0, /* xUpdate */ + 0, /* xBegin */ + 0, /* xSync */ + 0, /* xCommit */ + 0, /* xRollback */ + 0, /* xFindMethod */ + 0, /* xRename */ +}; + +#endif /* SQLITE_OMIT_VIRTUALTABLE */ + + +#ifdef _WIN32 +__declspec(dllexport) +#endif +int sqlite3_fuzzer_init( + sqlite3 *db, + char **pzErrMsg, + const sqlite3_api_routines *pApi +){ + int rc = SQLITE_OK; + SQLITE_EXTENSION_INIT2(pApi); +#ifndef SQLITE_OMIT_VIRTUALTABLE + rc = sqlite3_create_module(db, "fuzzer", &fuzzerModule, 0); +#endif + return rc; +} ADDED ext/misc/ieee754.c Index: ext/misc/ieee754.c ================================================================== --- ext/misc/ieee754.c +++ ext/misc/ieee754.c @@ -0,0 +1,131 @@ +/* +** 2013-04-17 +** +** The author disclaims copyright to this source code. In place of +** a legal notice, here is a blessing: +** +** May you do good and not evil. +** May you find forgiveness for yourself and forgive others. +** May you share freely, never taking more than you give. +** +****************************************************************************** +** +** This SQLite extension implements functions for the exact display +** and input of IEEE754 Binary64 floating-point numbers. +** +** ieee754(X) +** ieee754(Y,Z) +** +** In the first form, the value X should be a floating-point number. +** The function will return a string of the form 'ieee754(Y,Z)' where +** Y and Z are integers such that X==Y*pow(2,Z). +** +** In the second form, Y and Z are integers which are the mantissa and +** base-2 exponent of a new floating point number. The function returns +** a floating-point value equal to Y*pow(2,Z). +** +** Examples: +** +** ieee754(2.0) -> 'ieee754(2,0)' +** ieee754(45.25) -> 'ieee754(181,-2)' +** ieee754(2, 0) -> 2.0 +** ieee754(181, -2) -> 45.25 +*/ +#include "sqlite3ext.h" +SQLITE_EXTENSION_INIT1 +#include +#include + +/* +** Implementation of the ieee754() function +*/ +static void ieee754func( + sqlite3_context *context, + int argc, + sqlite3_value **argv +){ + if( argc==1 ){ + sqlite3_int64 m, a; + double r; + int e; + int isNeg; + char zResult[100]; + assert( sizeof(m)==sizeof(r) ); + if( sqlite3_value_type(argv[0])!=SQLITE_FLOAT ) return; + r = sqlite3_value_double(argv[0]); + if( r<0.0 ){ + isNeg = 1; + r = -r; + }else{ + isNeg = 0; + } + memcpy(&a,&r,sizeof(a)); + if( a==0 ){ + e = 0; + m = 0; + }else{ + e = a>>52; + m = a & ((((sqlite3_int64)1)<<52)-1); + m |= ((sqlite3_int64)1)<<52; + while( e<1075 && m>0 && (m&1)==0 ){ + m >>= 1; + e++; + } + if( isNeg ) m = -m; + } + sqlite3_snprintf(sizeof(zResult), zResult, "ieee754(%lld,%d)", + m, e-1075); + sqlite3_result_text(context, zResult, -1, SQLITE_TRANSIENT); + }else if( argc==2 ){ + sqlite3_int64 m, e, a; + double r; + int isNeg = 0; + m = sqlite3_value_int64(argv[0]); + e = sqlite3_value_int64(argv[1]); + if( m<0 ){ + isNeg = 1; + m = -m; + if( m<0 ) return; + }else if( m==0 && e>1000 && e<1000 ){ + sqlite3_result_double(context, 0.0); + return; + } + while( (m>>32)&0xffe00000 ){ + m >>= 1; + e++; + } + while( ((m>>32)&0xfff00000)==0 ){ + m <<= 1; + e--; + } + e += 1075; + if( e<0 ) e = m = 0; + if( e>0x7ff ) m = 0; + a = m & ((((sqlite3_int64)1)<<52)-1); + a |= e<<52; + if( isNeg ) a |= ((sqlite3_int64)1)<<63; + memcpy(&r, &a, sizeof(r)); + sqlite3_result_double(context, r); + } +} + + +#ifdef _WIN32 +__declspec(dllexport) +#endif +int sqlite3_ieee_init( + sqlite3 *db, + char **pzErrMsg, + const sqlite3_api_routines *pApi +){ + int rc = SQLITE_OK; + SQLITE_EXTENSION_INIT2(pApi); + (void)pzErrMsg; /* Unused parameter */ + rc = sqlite3_create_function(db, "ieee754", 1, SQLITE_UTF8, 0, + ieee754func, 0, 0); + if( rc==SQLITE_OK ){ + rc = sqlite3_create_function(db, "ieee754", 2, SQLITE_UTF8, 0, + ieee754func, 0, 0); + } + return rc; +} ADDED ext/misc/nextchar.c Index: ext/misc/nextchar.c ================================================================== --- ext/misc/nextchar.c +++ ext/misc/nextchar.c @@ -0,0 +1,311 @@ +/* +** 2013-02-28 +** +** The author disclaims copyright to this source code. In place of +** a legal notice, here is a blessing: +** +** May you do good and not evil. +** May you find forgiveness for yourself and forgive others. +** May you share freely, never taking more than you give. +** +****************************************************************************** +** +** This file contains code to implement the next_char(A,T,F,W,C) SQL function. +** +** The next_char(A,T,F,W,C) function finds all valid "next" characters for +** string A given the vocabulary in T.F. If the W value exists and is a +** non-empty string, then it is an SQL expression that limits the entries +** in T.F that will be considered. If C exists and is a non-empty string, +** then it is the name of the collating sequence to use for comparison. If +** +** Only the first three arguments are required. If the C parameter is +** omitted or is NULL or is an empty string, then the default collating +** sequence of T.F is used for comparision. If the W parameter is omitted +** or is NULL or is an empty string, then no filtering of the output is +** done. +** +** The T.F column should be indexed using collation C or else this routine +** will be quite slow. +** +** For example, suppose an application has a dictionary like this: +** +** CREATE TABLE dictionary(word TEXT UNIQUE); +** +** Further suppose that for user keypad entry, it is desired to disable +** (gray out) keys that are not valid as the next character. If the +** the user has previously entered (say) 'cha' then to find all allowed +** next characters (and thereby determine when keys should not be grayed +** out) run the following query: +** +** SELECT next_char('cha','dictionary','word'); +** +** IMPLEMENTATION NOTES: +** +** The next_char function is implemented using recursive SQL that makes +** use of the table name and column name as part of a query. If either +** the table name or column name are keywords or contain special characters, +** then they should be escaped. For example: +** +** SELECT next_char('cha','[dictionary]','[word]'); +** +** This also means that the table name can be a subquery: +** +** SELECT next_char('cha','(SELECT word AS w FROM dictionary)','w'); +*/ +#include "sqlite3ext.h" +SQLITE_EXTENSION_INIT1 +#include + +/* +** A structure to hold context of the next_char() computation across +** nested function calls. +*/ +typedef struct nextCharContext nextCharContext; +struct nextCharContext { + sqlite3 *db; /* Database connection */ + sqlite3_stmt *pStmt; /* Prepared statement used to query */ + const unsigned char *zPrefix; /* Prefix to scan */ + int nPrefix; /* Size of zPrefix in bytes */ + int nAlloc; /* Space allocated to aResult */ + int nUsed; /* Space used in aResult */ + unsigned int *aResult; /* Array of next characters */ + int mallocFailed; /* True if malloc fails */ + int otherError; /* True for any other failure */ +}; + +/* +** Append a result character if the character is not already in the +** result. +*/ +static void nextCharAppend(nextCharContext *p, unsigned c){ + int i; + for(i=0; inUsed; i++){ + if( p->aResult[i]==c ) return; + } + if( p->nUsed+1 > p->nAlloc ){ + unsigned int *aNew; + int n = p->nAlloc*2 + 30; + aNew = sqlite3_realloc(p->aResult, n*sizeof(unsigned int)); + if( aNew==0 ){ + p->mallocFailed = 1; + return; + }else{ + p->aResult = aNew; + p->nAlloc = n; + } + } + p->aResult[p->nUsed++] = c; +} + +/* +** Write a character into z[] as UTF8. Return the number of bytes needed +** to hold the character +*/ +static int writeUtf8(unsigned char *z, unsigned c){ + if( c<0x00080 ){ + z[0] = (unsigned char)(c&0xff); + return 1; + } + if( c<0x00800 ){ + z[0] = 0xC0 + (unsigned char)((c>>6)&0x1F); + z[1] = 0x80 + (unsigned char)(c & 0x3F); + return 2; + } + if( c<0x10000 ){ + z[0] = 0xE0 + (unsigned char)((c>>12)&0x0F); + z[1] = 0x80 + (unsigned char)((c>>6) & 0x3F); + z[2] = 0x80 + (unsigned char)(c & 0x3F); + return 3; + } + z[0] = 0xF0 + (unsigned char)((c>>18) & 0x07); + z[1] = 0x80 + (unsigned char)((c>>12) & 0x3F); + z[2] = 0x80 + (unsigned char)((c>>6) & 0x3F); + z[3] = 0x80 + (unsigned char)(c & 0x3F); + return 4; +} + +/* +** Read a UTF8 character out of z[] and write it into *pOut. Return +** the number of bytes in z[] that were used to construct the character. +*/ +static int readUtf8(const unsigned char *z, unsigned *pOut){ + static const unsigned char validBits[] = { + 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, + 0x08, 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f, + 0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17, + 0x18, 0x19, 0x1a, 0x1b, 0x1c, 0x1d, 0x1e, 0x1f, + 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, + 0x08, 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f, + 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, + 0x00, 0x01, 0x02, 0x03, 0x00, 0x01, 0x00, 0x00, + }; + unsigned c = z[0]; + if( c<0xc0 ){ + *pOut = c; + return 1; + }else{ + int n = 1; + c = validBits[c-0xc0]; + while( (z[n] & 0xc0)==0x80 ){ + c = (c<<6) + (0x3f & z[n++]); + } + if( c<0x80 || (c&0xFFFFF800)==0xD800 || (c&0xFFFFFFFE)==0xFFFE ){ + c = 0xFFFD; + } + *pOut = c; + return n; + } +} + +/* +** The nextCharContext structure has been set up. Add all "next" characters +** to the result set. +*/ +static void findNextChars(nextCharContext *p){ + unsigned cPrev = 0; + unsigned char zPrev[8]; + int n, rc; + + for(;;){ + sqlite3_bind_text(p->pStmt, 1, (char*)p->zPrefix, p->nPrefix, + SQLITE_STATIC); + n = writeUtf8(zPrev, cPrev+1); + sqlite3_bind_text(p->pStmt, 2, (char*)zPrev, n, SQLITE_STATIC); + rc = sqlite3_step(p->pStmt); + if( rc==SQLITE_DONE ){ + sqlite3_reset(p->pStmt); + return; + }else if( rc!=SQLITE_ROW ){ + p->otherError = rc; + return; + }else{ + const unsigned char *zOut = sqlite3_column_text(p->pStmt, 0); + unsigned cNext; + n = readUtf8(zOut+p->nPrefix, &cNext); + sqlite3_reset(p->pStmt); + nextCharAppend(p, cNext); + cPrev = cNext; + if( p->mallocFailed ) return; + } + } +} + + +/* +** next_character(A,T,F,W) +** +** Return a string composted of all next possible characters after +** A for elements of T.F. If W is supplied, then it is an SQL expression +** that limits the elements in T.F that are considered. +*/ +static void nextCharFunc( + sqlite3_context *context, + int argc, + sqlite3_value **argv +){ + nextCharContext c; + const unsigned char *zTable = sqlite3_value_text(argv[1]); + const unsigned char *zField = sqlite3_value_text(argv[2]); + const unsigned char *zWhere; + const unsigned char *zCollName; + char *zWhereClause = 0; + char *zColl = 0; + char *zSql; + int rc; + + memset(&c, 0, sizeof(c)); + c.db = sqlite3_context_db_handle(context); + c.zPrefix = sqlite3_value_text(argv[0]); + c.nPrefix = sqlite3_value_bytes(argv[0]); + if( zTable==0 || zField==0 || c.zPrefix==0 ) return; + if( argc>=4 + && (zWhere = sqlite3_value_text(argv[3]))!=0 + && zWhere[0]!=0 + ){ + zWhereClause = sqlite3_mprintf("AND (%s)", zWhere); + if( zWhereClause==0 ){ + sqlite3_result_error_nomem(context); + return; + } + }else{ + zWhereClause = ""; + } + if( argc>=5 + && (zCollName = sqlite3_value_text(argv[4]))!=0 + && zCollName[0]!=0 + ){ + zColl = sqlite3_mprintf("collate \"%w\"", zCollName); + if( zColl==0 ){ + sqlite3_result_error_nomem(context); + if( zWhereClause[0] ) sqlite3_free(zWhereClause); + return; + } + }else{ + zColl = ""; + } + zSql = sqlite3_mprintf( + "SELECT %s FROM %s" + " WHERE %s>=(?1 || ?2) %s" + " AND %s<=(?1 || char(1114111)) %s" /* 1114111 == 0x10ffff */ + " %s" + " ORDER BY 1 %s ASC LIMIT 1", + zField, zTable, zField, zColl, zField, zColl, zWhereClause, zColl + ); + if( zWhereClause[0] ) sqlite3_free(zWhereClause); + if( zColl[0] ) sqlite3_free(zColl); + if( zSql==0 ){ + sqlite3_result_error_nomem(context); + return; + } + + rc = sqlite3_prepare_v2(c.db, zSql, -1, &c.pStmt, 0); + sqlite3_free(zSql); + if( rc ){ + sqlite3_result_error(context, sqlite3_errmsg(c.db), -1); + return; + } + findNextChars(&c); + if( c.mallocFailed ){ + sqlite3_result_error_nomem(context); + }else{ + unsigned char *pRes; + pRes = sqlite3_malloc( c.nUsed*4 + 1 ); + if( pRes==0 ){ + sqlite3_result_error_nomem(context); + }else{ + int i; + int n = 0; + for(i=0; i +#include +#include + +/* The following object is the session context for a single percentile() +** function. We have to remember all input Y values until the very end. +** Those values are accumulated in the Percentile.a[] array. +*/ +typedef struct Percentile Percentile; +struct Percentile { + unsigned nAlloc; /* Number of slots allocated for a[] */ + unsigned nUsed; /* Number of slots actually used in a[] */ + double rPct; /* 1.0 more than the value for P */ + double *a; /* Array of Y values */ +}; + +/* +** Return TRUE if the input floating-point number is an infinity. +*/ +static int isInfinity(double r){ + sqlite3_uint64 u; + assert( sizeof(u)==sizeof(r) ); + memcpy(&u, &r, sizeof(u)); + return ((u>>52)&0x7ff)==0x7ff; +} + +/* +** Return TRUE if two doubles differ by 0.001 or less +*/ +static int sameValue(double a, double b){ + a -= b; + return a>=-0.001 && a<=0.001; +} + +/* +** The "step" function for percentile(Y,P) is called once for each +** input row. +*/ +static void percentStep(sqlite3_context *pCtx, int argc, sqlite3_value **argv){ + Percentile *p; + double rPct; + int eType; + double y; + assert( argc==2 ); + + /* Requirement 3: P must be a number between 0 and 100 */ + eType = sqlite3_value_numeric_type(argv[1]); + rPct = sqlite3_value_double(argv[1]); + if( (eType!=SQLITE_INTEGER && eType!=SQLITE_FLOAT) || + ((rPct = sqlite3_value_double(argv[1]))<0.0 || rPct>100.0) ){ + sqlite3_result_error(pCtx, "2nd argument to percentile() is not " + "a number between 0.0 and 100.0", -1); + return; + } + + /* Allocate the session context. */ + p = (Percentile*)sqlite3_aggregate_context(pCtx, sizeof(*p)); + if( p==0 ) return; + + /* Remember the P value. Throw an error if the P value is different + ** from any prior row, per Requirement (2). */ + if( p->rPct==0.0 ){ + p->rPct = rPct+1.0; + }else if( !sameValue(p->rPct,rPct+1.0) ){ + sqlite3_result_error(pCtx, "2nd argument to percentile() is not the " + "same for all input rows", -1); + return; + } + + /* Ignore rows for which Y is NULL */ + eType = sqlite3_value_type(argv[0]); + if( eType==SQLITE_NULL ) return; + + /* If not NULL, then Y must be numeric. Otherwise throw an error. + ** Requirement 4 */ + if( eType!=SQLITE_INTEGER && eType!=SQLITE_FLOAT ){ + sqlite3_result_error(pCtx, "1st argument to percentile() is not " + "numeric", -1); + return; + } + + /* Throw an error if the Y value is infinity or NaN */ + y = sqlite3_value_double(argv[0]); + if( isInfinity(y) ){ + sqlite3_result_error(pCtx, "Inf input to percentile()", -1); + return; + } + + /* Allocate and store the Y */ + if( p->nUsed>=p->nAlloc ){ + unsigned n = p->nAlloc*2 + 250; + double *a = sqlite3_realloc(p->a, sizeof(double)*n); + if( a==0 ){ + sqlite3_free(p->a); + memset(p, 0, sizeof(*p)); + sqlite3_result_error_nomem(pCtx); + return; + } + p->nAlloc = n; + p->a = a; + } + p->a[p->nUsed++] = y; +} + +/* +** Compare to doubles for sorting using qsort() +*/ +static int doubleCmp(const void *pA, const void *pB){ + double a = *(double*)pA; + double b = *(double*)pB; + if( a==b ) return 0; + if( aa==0 ) return; + if( p->nUsed ){ + qsort(p->a, p->nUsed, sizeof(double), doubleCmp); + ix = (p->rPct-1.0)*(p->nUsed-1)*0.01; + i1 = (unsigned)ix; + i2 = ix==(double)i1 || i1==p->nUsed-1 ? i1 : i1+1; + v1 = p->a[i1]; + v2 = p->a[i2]; + vx = v1 + (v2-v1)*(ix-i1); + sqlite3_result_double(pCtx, vx); + } + sqlite3_free(p->a); + memset(p, 0, sizeof(*p)); +} + + +#ifdef _WIN32 +__declspec(dllexport) +#endif +int sqlite3_percentile_init( + sqlite3 *db, + char **pzErrMsg, + const sqlite3_api_routines *pApi +){ + int rc = SQLITE_OK; + SQLITE_EXTENSION_INIT2(pApi); + (void)pzErrMsg; /* Unused parameter */ + rc = sqlite3_create_function(db, "percentile", 2, SQLITE_UTF8, 0, + 0, percentStep, percentFinal); + return rc; +} ADDED ext/misc/regexp.c Index: ext/misc/regexp.c ================================================================== --- ext/misc/regexp.c +++ ext/misc/regexp.c @@ -0,0 +1,760 @@ +/* +** 2012-11-13 +** +** The author disclaims copyright to this source code. In place of +** a legal notice, here is a blessing: +** +** May you do good and not evil. +** May you find forgiveness for yourself and forgive others. +** May you share freely, never taking more than you give. +** +****************************************************************************** +** +** The code in this file implements a compact but reasonably +** efficient regular-expression matcher for posix extended regular +** expressions against UTF8 text. +** +** This file is an SQLite extension. It registers a single function +** named "regexp(A,B)" where A is the regular expression and B is the +** string to be matched. By registering this function, SQLite will also +** then implement the "B regexp A" operator. Note that with the function +** the regular expression comes first, but with the operator it comes +** second. +** +** The following regular expression syntax is supported: +** +** X* zero or more occurrences of X +** X+ one or more occurrences of X +** X? zero or one occurrences of X +** X{p,q} between p and q occurrences of X +** (X) match X +** X|Y X or Y +** ^X X occurring at the beginning of the string +** X$ X occurring at the end of the string +** . Match any single character +** \c Character c where c is one of \{}()[]|*+?. +** \c C-language escapes for c in afnrtv. ex: \t or \n +** \uXXXX Where XXXX is exactly 4 hex digits, unicode value XXXX +** \xXX Where XX is exactly 2 hex digits, unicode value XX +** [abc] Any single character from the set abc +** [^abc] Any single character not in the set abc +** [a-z] Any single character in the range a-z +** [^a-z] Any single character not in the range a-z +** \b Word boundary +** \w Word character. [A-Za-z0-9_] +** \W Non-word character +** \d Digit +** \D Non-digit +** \s Whitespace character +** \S Non-whitespace character +** +** A nondeterministic finite automaton (NFA) is used for matching, so the +** performance is bounded by O(N*M) where N is the size of the regular +** expression and M is the size of the input string. The matcher never +** exhibits exponential behavior. Note that the X{p,q} operator expands +** to p copies of X following by q-p copies of X? and that the size of the +** regular expression in the O(N*M) performance bound is computed after +** this expansion. +*/ +#include +#include +#include "sqlite3ext.h" +SQLITE_EXTENSION_INIT1 + +/* +** The following #defines change the names of some functions implemented in +** this file to prevent name collisions with C-library functions of the +** same name. +*/ +#define re_match sqlite3re_match +#define re_compile sqlite3re_compile +#define re_free sqlite3re_free + +/* The end-of-input character */ +#define RE_EOF 0 /* End of input */ + +/* The NFA is implemented as sequence of opcodes taken from the following +** set. Each opcode has a single integer argument. +*/ +#define RE_OP_MATCH 1 /* Match the one character in the argument */ +#define RE_OP_ANY 2 /* Match any one character. (Implements ".") */ +#define RE_OP_ANYSTAR 3 /* Special optimized version of .* */ +#define RE_OP_FORK 4 /* Continue to both next and opcode at iArg */ +#define RE_OP_GOTO 5 /* Jump to opcode at iArg */ +#define RE_OP_ACCEPT 6 /* Halt and indicate a successful match */ +#define RE_OP_CC_INC 7 /* Beginning of a [...] character class */ +#define RE_OP_CC_EXC 8 /* Beginning of a [^...] character class */ +#define RE_OP_CC_VALUE 9 /* Single value in a character class */ +#define RE_OP_CC_RANGE 10 /* Range of values in a character class */ +#define RE_OP_WORD 11 /* Perl word character [A-Za-z0-9_] */ +#define RE_OP_NOTWORD 12 /* Not a perl word character */ +#define RE_OP_DIGIT 13 /* digit: [0-9] */ +#define RE_OP_NOTDIGIT 14 /* Not a digit */ +#define RE_OP_SPACE 15 /* space: [ \t\n\r\v\f] */ +#define RE_OP_NOTSPACE 16 /* Not a digit */ +#define RE_OP_BOUNDARY 17 /* Boundary between word and non-word */ + +/* Each opcode is a "state" in the NFA */ +typedef unsigned short ReStateNumber; + +/* Because this is an NFA and not a DFA, multiple states can be active at +** once. An instance of the following object records all active states in +** the NFA. The implementation is optimized for the common case where the +** number of actives states is small. +*/ +typedef struct ReStateSet { + unsigned nState; /* Number of current states */ + ReStateNumber *aState; /* Current states */ +} ReStateSet; + +/* An input string read one character at a time. +*/ +typedef struct ReInput ReInput; +struct ReInput { + const unsigned char *z; /* All text */ + int i; /* Next byte to read */ + int mx; /* EOF when i>=mx */ +}; + +/* A compiled NFA (or an NFA that is in the process of being compiled) is +** an instance of the following object. +*/ +typedef struct ReCompiled ReCompiled; +struct ReCompiled { + ReInput sIn; /* Regular expression text */ + const char *zErr; /* Error message to return */ + char *aOp; /* Operators for the virtual machine */ + int *aArg; /* Arguments to each operator */ + unsigned (*xNextChar)(ReInput*); /* Next character function */ + unsigned char zInit[12]; /* Initial text to match */ + int nInit; /* Number of characters in zInit */ + unsigned nState; /* Number of entries in aOp[