Many hyperlinks are disabled.
Use anonymous login
to enable hyperlinks.
100 descendants and 100 ancestors of 0fc0ea20920615f3e48ea2dbe2b7dcd979b0993e
2015-07-07
| ||
15:14 | No need to test sqlite3GlobalConfig.bCoreMutex when SQLITE_THREADSAFE==0. (check-in: 26db0fee user: drh tags: pcache-bulk-local) | |
14:06 | Simplify the page recycling condition in pcache1. Fix test cases to work with the latest changes. (check-in: 5b60df55 user: drh tags: pcache-bulk-local) | |
08:29 | Further optimizations for fts5 b-tree seeks. (check-in: f3789968 user: dan tags: trunk) | |
2015-07-06
| ||
20:57 | A unified cache is now only used for SQLITE_ENABLE_MEMORY_MANAGEMENT, or if SQLITE_CONFIG_PAGECACHE defines a shared start-time page cache buffer and the application is single-threaded. (check-in: d5ff1d69 user: drh tags: pcache-bulk-local) | |
20:27 | Speed up seek operations on fts5 b-tree structures. (check-in: 7b7da1eb user: dan tags: trunk) | |
18:54 | Enhance separate pcache1 to allocate a block of pages from heap on startup, if possible, for a 5.2% performance improvement. (check-in: aa7341c8 user: drh tags: pcache-bulk-local) | |
2015-07-05
| ||
22:15 | Do not allow recursive CTEs that use aggregate queries in the recursive part. (check-in: 6d2999af user: drh tags: trunk) | |
2015-07-04
| ||
18:44 | Optimize seek operations on fts5 b-trees. (check-in: 8cf02090 user: dan tags: trunk) | |
18:15 | Preserve the number of requested PAGECACHE pages even if the memory pointer or size is zero. Enhance the pcache1.c header comment to explain the memory layout of a page cache line. (check-in: dacb2a61 user: drh tags: trunk) | |
15:35 | Fix a problem in the fts5 integrity-check. (check-in: 4e473559 user: dan tags: trunk) | |
11:14 | Do not preserve the btreeInitPage() results in PRAGMA integrity_check if there were cell sizing errors because PRAGMA cell_size_check was turned off during the btreeInitPage() call. (check-in: 743bf1f1 user: drh tags: trunk) | |
00:04 | Sync up Makefile clean targets for FTS5. (check-in: 43ead44e user: mistachkin tags: trunk) | |
2015-07-03
| ||
23:29 | Correction to check-in [1025873fdf], tighten up the number of static test mutexes. (check-in: 4e515897 user: mistachkin tags: trunk) | |
23:12 | Update clean target in MSVC makefile. (check-in: e6c03e72 user: mistachkin tags: trunk) | |
23:11 | Enhance mutex testing to include APP and VFS static mutexes. (check-in: 1025873f user: mistachkin tags: trunk) | |
21:38 | Add static mutexes for use by the built-in / third-party VFSs and use the built-in VFS mutex where appropriate. (check-in: b202e2a1 user: mistachkin tags: trunk) | |
20:47 | Rework the Fts5MultiSegIter structure a bit to make it more efficient. (check-in: 0778825d user: dan tags: trunk) | |
19:13 | Speed up eof checks on fts5 cursors. (check-in: 3df4af5d user: dan tags: trunk) | |
17:54 | Enable use of the __builtin_bswap32() only with GCC 4.3 and higher. (check-in: 030f60a7 user: mistachkin tags: trunk) | |
17:14 | Avoid freeing the array of instance matches each time the fts5 xNext() method is called. (check-in: b9b0c1e5 user: dan tags: trunk) | |
14:34 | New command-line options for speedtest1: --multithread, --nomemstat, --serialized, and --singlethread (check-in: 2b756722 user: drh tags: trunk) | |
2015-07-02
| ||
20:12 | Copy fts5.h into the build directory as part of building fts5.c. Also remove code to edit fts5parse.c from various Makefiles and add it to mkfts5c.tcl. (check-in: 4d8f03dc user: dan tags: trunk) | |
19:47 | When doing coverage analysis of a btree page for pragma integrity_check, make the first entry (that covers the header, cell index, and gap) implied, for a performance boost and size reduction. (check-in: e53d497c user: drh tags: trunk) | |
18:52 | Minor change to mkfts5c.tcl so that fts5.c can be used according to the instructions in loadext.html. (check-in: edbcccd3 user: dan tags: trunk) | |
18:47 | Merge in the latest enhancements from trunks, especially the use of _byteswap_ulong() and similar intrinsics on MSVC. (check-in: 85ca4409 user: drh tags: sessions) | |
18:16 | Add fts5_source_id() SQL function, similar to sqlite_source_id(). (check-in: ec257348 user: dan tags: trunk) | |
16:52 | Fix harmless compiler warnings and one macro VVA_ONLY macro usage issue. (check-in: bcc8a755 user: mistachkin tags: trunk) | |
16:50 | Simplify FTS5 handling in the MSVC makefile. (check-in: f022e043 user: mistachkin tags: trunk) | |
16:29 | Fix a (harmless) shadowed local variable definition in the integrity_check logic. (check-in: 3a26a919 user: drh tags: trunk) | |
16:17 | Smaller and faster PRAGMA integrity_check that also does a better job of detecting errors. Some output text describing discovered file corruption has changed for clarity. (check-in: 251a7590 user: drh tags: trunk) | |
15:52 | Remove "#ifdef SQLITE_ENABLE_FTS5" from individual fts5 source files. Add a single "#if !defined(SQLITE_CORE) || defined(SQLITE_ENABLE_FTS5)" to fts5.c. (check-in: 7819002e user: dan tags: trunk) | |
01:38 | Add the --shrink-memory option to the speedtest1 test program. (check-in: c9ddbd88 user: drh tags: trunk) | |
2015-07-01
| ||
19:59 | Avoid create a stack from in sqlite3BackupUpdate() in the common case where the first argument is NULL. (check-in: 2a897b9e user: drh tags: trunk) | |
17:53 | Simplification of PRAGMA integrity_check logic. Make sure that the depth of the right-most subtree is correct. Size reduction and performance increase, with no change in output. (check-in: 550705fc user: drh tags: trunk) | |
17:13 | Rework the PRAGMA integrity_check logic. Simplify the checkTreePage() routine and clean up the error messages generated. (Closed-Leaf check-in: 1c522123 user: drh tags: integrity-check-refactor) | |
04:08 | Fix some harmless compiler warnings. (check-in: 307195c8 user: drh tags: trunk) | |
01:31 | Change integrity_check to analyze the cells of a page in reverse order, as this will tend to insert the cells into the analysis heap in increasing order by address, which is the most efficient way to load a min-heap. (check-in: 59ad912c user: drh tags: trunk) | |
2015-06-30
| ||
17:28 | Make use of the _byteswap_ushort() and _byteswap_ulong() compiler intrinsics for MSVC, when available. (check-in: fe144dd7 user: mistachkin tags: trunk) | |
16:29 | Merge all the latest enhancements from trunk. This merge include FTS5 and a number of notable performance enhancements. (check-in: 39936b33 user: drh tags: sessions) | |
15:10 | Make use of built-in bswap32() and bswap16() functions in GCC/Clang for a significant performance improvement there. (check-in: 8bfcda3d user: drh tags: trunk) | |
14:01 | Only use __builtin_bswap16() with GCC 4.8 and later. (Closed-Leaf check-in: ce8177e3 user: drh tags: bswap-functions) | |
13:28 | Remove the use of htonl() in the previous check-in due to linkage issues. Add the get2byteAligned() macro and use it for access to the cell offsets on btree pages for about a 1% performance gain. (check-in: 79ff36b7 user: drh tags: bswap-functions) | |
12:47 | Make use of htonl() and __builtin_bswap32() for faster implementations of sqlite3Get4byte() and sqlite3Put4byte(). (check-in: bc27ebd7 user: drh tags: bswap-functions) | |
11:07 | Change an unreachable branch into an assert() in sqlite3PagerAcquire() and optimize sqlite3PcacheOpenSavepoint() by factoring out rarely used code into a subroutine. (check-in: b406b20e user: drh tags: trunk) | |
03:57 | Optimization to the sqlite3PcacheFetch() logic. (check-in: d9a0481c user: drh tags: trunk) | |
03:34 | Put all variable declarations for sqlite3PagerWrite() at the beginning of the block. Syntax only - no logic changes. (check-in: a0fa6b3b user: drh tags: trunk) | |
03:18 | Implement sqlite3Strlen30() using strlen() from the C library. (check-in: 8001aa52 user: drh tags: trunk) | |
03:13 | Change sqlite3ApiExit() so that its first argument is never NULL. (check-in: 791b706e user: drh tags: trunk) | |
02:47 | Put BtCursor objects on a singly-linked list instead of a doubly-linked list. Add the BTCF_Multiple flag. Only invoke saveAllCursors() when using a cursor that has BTCF_Multiple set. (check-in: 429ccef2 user: drh tags: trunk) | |
01:25 | Convert several 5-year-old and older NEVER() macros into assert(). (check-in: ed54c14e user: drh tags: trunk) | |
2015-06-29
| ||
23:01 | From sqlite3BtreeInsert(), bypass the btreeMoveto() routine for table inserts and go directly to sqlite3BtreeMovetoUnpacked(). (check-in: 53fe685d user: drh tags: trunk) | |
20:53 | Add a bypass path in sqlite3PagerWrite() for pages with the PGHDR_WRITEABLE bit set, for about a 1% performance increase. (check-in: ba425a6a user: drh tags: trunk) | |
19:08 | Combine subjRequiresPage() and subjournalPage() into a single subjournalPageIfRequired() routine. (check-in: 3b65eb56 user: drh tags: trunk) | |
18:29 | Add the PGHDR_WRITEABLE bit for PgHdr.flags which is used to distinguish between pages that are on the dirty list and pages that are safe to modify. (check-in: 7c4ef7b7 user: drh tags: trunk) | |
18:14 | Fix over-length source code lines in pager.c. (check-in: 14de3d39 user: drh tags: trunk) | |
15:41 | Fix minor problems in the ota demo application. (check-in: 6aaaec6e user: dan tags: trunk) | |
14:11 | Simplifications and performance improvement in pager_write(). (check-in: ab7aeeea user: drh tags: trunk) | |
04:21 | Add the new PGHDR_CLEAN bit to PgHdr.flags in pcache.c. This bit is always the opposite of PGHDR_DIRTY. Use the extra bit to avoid a comparison for a small performance boost. (check-in: 8619fc34 user: drh tags: trunk) | |
03:28 | Very small size reduction and performance increase in sqlite3BitvecTest(). (check-in: 9b3a7281 user: drh tags: trunk) | |
00:52 | Move an assert() and testcase() into their correct position within getAndInitPage(). (check-in: 18115164 user: drh tags: trunk) | |
00:21 | Use tail recursion in pcache1Unpin() to get a small size reduction and speed improvement. (check-in: fde70472 user: drh tags: trunk) | |
2015-06-28
| ||
17:33 | Comment typo fix and minor cleanup in the pager. No logic changes. (check-in: 94ef1701 user: drh tags: trunk) | |
02:58 | Avoid unnecessary calls to sqlite3VdbeSerialTypeLen() for integer serial types, for a small size reduction and a speed increase. (check-in: 9cd30d33 user: drh tags: trunk) | |
2015-06-27
| ||
23:55 | Make greater use of BtCursor.curIntKey. (check-in: 63998471 user: drh tags: trunk) | |
22:49 | Add the BtCursor.curIntKey field and use it for a small size reduction and performance boost. (check-in: 4a17df13 user: drh tags: trunk) | |
20:55 | Enhancements to the previous check-in to make it a little smaller and faster. (check-in: 291d9e0c user: drh tags: trunk) | |
19:45 | Performance improvements in moveToChild() by shifting some work over to getAndInitPage(). Net improvement is about 800K cycles at cost of 30 bytes. (check-in: 1956a4ce user: drh tags: trunk) | |
15:51 | Manually inline the call from getAndInitPage() to btreeGetPage() for a savings of 2.5 million cycles at a cost of less than 100 bytes. (check-in: 7f65b96b user: drh tags: trunk) | |
14:59 | Add releasePageNotNull() as an alternative to releasePage() when the argument is guaranteed to be non-NULL, and use it for a small performance gain. (check-in: 9383a688 user: drh tags: trunk) | |
03:58 | Add the Mempage.aDataOfst field and use it in sqlite3BtreeMovetoUnpacked() for about a 2 million cycle gain. (check-in: bee94dc3 user: drh tags: trunk) | |
2015-06-26
| ||
20:45 | Treat compilation of FTS5 for the loadable extension specially with MSVC. (check-in: 7c610276 user: mistachkin tags: trunk) | |
20:25 | Merge fts5 branch into trunk. (check-in: d27d9965 user: dan tags: trunk) | |
20:14 | Merge latest trunk with this branch. (Closed-Leaf check-in: 8671b9e1 user: dan tags: fts5) | |
20:13 | Remove unnecessary lines from fts3.h and main.mk. (check-in: c1b268ce user: dan tags: fts5) | |
20:08 | Fix a segfault that could follow an OOM error in fts5. (check-in: 713239b8 user: dan tags: fts5) | |
19:33 | Merge latest trunk changes with this branch. (check-in: 2a1af0f2 user: dan tags: fts5) | |
18:50 | Fix some cases in the fts5 code where a corrupt database could cause a buffer overread. (check-in: 360c57bb user: dan tags: fts5) | |
17:10 | Merge changes to get FTS5 working with MSVC. (check-in: 954231d2 user: mistachkin tags: fts5) | |
16:55 | Merge upstream changes. Get the test fixture working with FTS5. Fix compiler warnings. (Closed-Leaf check-in: bfcd1608 user: mistachkin tags: fts5Msvc) | |
16:42 | Remove fts5 initialization code from core file main.c. (check-in: c91a93b3 user: dan tags: fts5) | |
16:17 | Add FTS5 DLL target for MSVC. (check-in: be85b824 user: mistachkin tags: fts5Msvc) | |
04:34 | Initial changes to get FTS5 working with MSVC. (check-in: ef2052f8 user: mistachkin tags: fts5Msvc) | |
2015-06-25
| ||
20:36 | Fix Makefile.in to account for recent changes. Update fts5 test scripts so that they do not run if SQLITE_ENABLE_FTS5 is not defined. (check-in: 31752207 user: dan tags: fts5) | |
20:16 | Merge latest trunk changes into this branch. (check-in: fcd8f7ce user: dan tags: fts5) | |
20:10 | Add a script to combine all fts5 code into a single file - fts5.c - that can be used to build an SQLite loadable extension. (check-in: 46e86b06 user: dan tags: fts5) | |
2015-06-23
| ||
18:47 | Improve test coverage of fts5. (check-in: df5ccea8 user: dan tags: fts5) | |
15:06 | Merge latest trunk changes with this branch. Add tests for columnsize=0. (check-in: ef44c71a user: dan tags: fts5) | |
2015-06-10
| ||
10:45 | Fix the fts5 xRename() method. (check-in: 0f7fd513 user: dan tags: fts5) | |
2015-06-09
| ||
20:58 | Add the "columnsize=" option to fts5, similar to fts4's "matchinfo=fts3". (check-in: aa12f9d9 user: dan tags: fts5) | |
2015-06-06
| ||
19:23 | Fix a comment in fts5.h. (check-in: e964b587 user: dan tags: fts5) | |
16:28 | Fix handling of fts5 rowid constraints in the absence of a MATCH clause. Add tests to cover recently added branches. (check-in: 3a9cb648 user: dan tags: fts5) | |
2015-06-05
| ||
19:05 | Make use of range constraints on the rowid field of an fts5 table in full-text queries. (check-in: 32cbc0ed user: dan tags: fts5) | |
2015-06-03
| ||
11:23 | Fix an fts5 problem in extracting columns from position lists containing large varints. (check-in: 4ea015ab user: dan tags: fts5) | |
2015-06-02
| ||
19:38 | Change the fts5 multi-column syntax to use parenthesis instead of square brackets. (check-in: ab85a6fc user: dan tags: fts5) | |
18:07 | Merge latest trunk changes with this branch. (check-in: c9ffda4a user: dan tags: fts5) | |
17:57 | Reimplement [ec69e09a] so that each call to the xNext() method does not involve two iterations of the match expression tree (only one). (check-in: 80fe305b user: dan tags: fts5) | |
2015-06-01
| ||
19:17 | Improve performance of the fts5 AND operator. (check-in: b43e9a5b user: dan tags: fts5) | |
09:15 | Change fts5 expression processing to avoid linear scans of long doclists caused by phrases that match specific columns only. (check-in: ec69e09a user: dan tags: fts5) | |
2015-05-30
| ||
11:49 | Remove the "#include sqlite3Int.h" from fts5Int.h. (check-in: e008c3c8 user: dan tags: fts5) | |
2015-05-29
| ||
19:00 | Add extra tests and fixes for multi-column matches. (check-in: ae6794ff user: dan tags: fts5) | |
15:55 | Add syntax to fts5 used to specify that a phrase or NEAR group should match a subset of columns. For example "[col1 col2 ...] : <phrase>". (check-in: 0fc0ea20 user: dan tags: fts5) | |
2015-05-28
| ||
19:57 | Optimizations for fts5 queries that match against a specific column. (check-in: b29ac50a user: dan tags: fts5) | |
14:37 | Remove some dead code from fts5. Add auxiliary function api tests to the same. (check-in: 0f9df202 user: dan tags: fts5) | |
2015-05-26
| ||
18:22 | Simplifications and minor optimizations to fts5 prefix queries that cannot use a prefix index. (check-in: aef89d9f user: dan tags: fts5) | |
2015-05-25
| ||
11:46 | Avoid redundant loads from the %_data table in the fts5 code. (check-in: 02069782 user: dan tags: fts5) | |
2015-05-23
| ||
15:43 | Avoid making redundant copies of position-lists within the fts5 code. (check-in: 5165de54 user: dan tags: fts5) | |
2015-05-22
| ||
07:44 | Increase test coverage of fts5_vocab.c. (check-in: 065ab83a user: dan tags: fts5) | |
06:08 | Improve test coverage of fts5_unicode2.c. (check-in: fea8a4db user: dan tags: fts5) | |
2015-05-20
| ||
09:27 | Improve test coverage of fts5_tokenize.c. (check-in: 0e91a6a5 user: dan tags: fts5) | |
2015-05-19
| ||
19:37 | Add tests for fts5 tokenizers. (check-in: 4f90ba20 user: dan tags: fts5) | |
11:38 | Update Makefile.in so that the amalgamation files built by "make sqlite3.c" include fts5. (check-in: 2870a805 user: dan tags: fts5) | |
11:32 | Fix a memory leak that could follow an OOM condition in fts5. (check-in: de9f8ef6 user: dan tags: fts5) | |
2015-05-18
| ||
20:34 | Improve test coverage of fts5_storage.c. (check-in: 4dfe2e58 user: dan tags: fts5) | |
18:24 | Fix a bug in test script fts5fault4.test. (check-in: a5080593 user: dan tags: fts5) | |
18:03 | Add a test for an untested branch in fts5_expr.c. (check-in: ce08206b user: dan tags: fts5) | |
17:50 | Improve test coverage of fts5_config.c. (check-in: 47dbfadb user: dan tags: fts5) | |
2015-05-16
| ||
20:04 | Further test coverage improvements for fts5. (check-in: 927d9a64 user: dan tags: fts5) | |
2015-05-15
| ||
18:13 | Improve test coverage of fts5_index.c. (check-in: 7aea8c6d user: dan tags: fts5) | |
12:18 | Add test cases. And some fixes. (check-in: adee7885 user: dan tags: fts5) | |
2015-05-13
| ||
18:12 | Merge latest trunk changes with this branch. (check-in: b5f0e8c5 user: dan tags: fts5) | |
17:15 | Change fts5 doclist-index structures to be trees instead of flat lists. This only makes a difference for databases that contain millions of instances of the same token. (check-in: aa34bf66 user: dan tags: fts5) | |
04:50 | Enhancements to the MSVC makefile. (check-in: 59e3e9e7 user: mistachkin tags: trunk) | |
2015-05-12
| ||
19:53 | Fix typo in Win32 VFS code enabled when the SQLITE_WIN32_USE_UUID compile-time option is used. (check-in: b33f1bac user: mistachkin tags: trunk) | |
19:10 | Attempt to get DBSTAT to compile without warnings across all build configurations. (check-in: c3cbe3b0 user: drh tags: trunk) | |
14:22 | Fix a compiler warning when building with tclsqlite3.c and without SQLITE_ENABLE_DBSTAT_VTAB. (check-in: aad3ff25 user: drh tags: trunk) | |
13:32 | Improvements to documentation of the sqlite3_column_xxxxx() interfaces. No code changes. (check-in: f1aa951a user: drh tags: trunk) | |
12:24 | Try to get recent sqlite3_analyzer and sqldiff tests working for all tested combinations of compile-time options, especially SQLITE_OMIT_VIRTUALTABLE and SQLITE_OMIT_LOAD_EXTENSION. (check-in: 07c7d392 user: drh tags: trunk) | |
00:46 | Fix sqldiff.exe so that it always runs in single-thread mode. (check-in: c223910e user: drh tags: trunk) | |
2015-05-11
| ||
19:01 | Add new fts3 matchinfo option 'b'. Also optimize existing option 'y'. (check-in: 2e7679a1 user: dan tags: trunk) | |
18:48 | Add missing "finish_test" commands to the end of the two new test scripts for sqlite3_analyzer and sqldiff. (check-in: 1d5e72b1 user: drh tags: trunk) | |
18:46 | Merge latest trunk changes into this branch. (Closed-Leaf check-in: 82e5a6e0 user: dan tags: fts3-matchinfo-y) | |
17:46 | Test cases for sqlite3_analyzer and sqldiff. Fix a problem with sqlite3_analyzer related to the renaming of the initialization routine. (check-in: 85a4a46c user: drh tags: trunk) | |
16:27 | Fix minor Makefile typos. Improve consistency of MSVC makefile. Add new targets to clean. (check-in: f84fbe98 user: mistachkin tags: trunk) | |
12:15 | Build the sqlite3_analyzer.exe and sqldiff.exe programs on "make test" and "make smoketest" and other similar test targets. (check-in: 1b83f2e7 user: drh tags: trunk) | |
11:59 | Revamp the way the DBSTAT virtual table is registered. (check-in: 4e652015 user: drh tags: trunk) | |
06:22 | Change autoconf/Makefile.am to avoid building target sqlite3.o as part of both the shared library and shell tool. Doing so causes problems for parallel builds. (check-in: 85bfa9a6 user: dan tags: trunk) | |
2015-05-10
| ||
02:01 | Fix the sqlite3_memory_used() and sqlite3_memory_highwater() interfaces so that they really do provide a 64-bit answer. (check-in: 8a0d5d5e user: drh tags: trunk) | |
2015-05-09
| ||
18:28 | Allow the fts5vocab table to optionally provide data on a per-column basis. (check-in: 39222761 user: dan tags: fts5) | |
12:14 | Version 3.8.10.1 (check-in: 05b4b1f2 user: drh tags: trunk, release, version-3.8.10.1) | |
10:27 | Bump the version number to 3.8.10.1 (check-in: 9c6bf0c1 user: drh tags: trunk) | |
2015-05-08
| ||
20:21 | Add the fts5vocab module, for direct access to the fts5 index. (check-in: 6bf93e3b user: dan tags: fts5) | |
09:21 | Improve the error message returned by FTS5 if it encounters an unknown file format. (check-in: f369caec user: dan tags: fts5) | |
01:04 | Fix harmless compiler warning with MSVC. (check-in: 902d0cb8 user: mistachkin tags: trunk) | |
00:58 | Remove a couple stray test breakpoint calls. (check-in: 2860cebe user: mistachkin tags: trunk) | |
2015-05-07
| ||
20:26 | Add an entry to sqlite3_compileoption_used() for SQLITE_ENABLE_DBSTAT_VTAB. (check-in: 480b4cb0 user: drh tags: trunk) | |
19:29 | Change to storing all keys in a single merge-tree structure instead of one main structure and a separate one for each prefix index. This is a file-format change. Also introduce a mechanism for managing file-format changes. (check-in: a684b5e2 user: dan tags: fts5) | |
18:29 | Testing improvements and corner-case bug fixes for the dbstat virtual table. (check-in: d51ce539 user: drh tags: trunk) | |
14:41 | Enhance the dbstat virtual table with the ability to analyze ATTACHed databases. (check-in: 25ec0940 user: drh tags: trunk) | |
11:53 | Version 3.8.10 (check-in: cf975957 user: drh tags: trunk, release, version-3.8.10) | |
00:09 | Remove a faulty assert() statement. (check-in: 5f2539da user: drh tags: trunk) | |
2015-05-06
| ||
18:15 | Merge latest trunk changes with this branch. (check-in: 8a13e1fd user: dan tags: fts3-matchinfo-y) | |
17:51 | Remove some dead code from fts3_snippet.c. (check-in: 46b2d3ce user: dan tags: fts3-matchinfo-y) | |
17:41 | More optimization for the 'y' and 'b' matchinfo directives. (check-in: 8c5b9fed user: dan tags: fts3-matchinfo-y) | |
14:18 | Have the autoconf package build the shell tool with SQLite linked in statically. (check-in: 31834c3a user: dan tags: trunk) | |
08:43 | Further optimizations for the 'y' and 'b' matchinfo operators. (check-in: fbd038bb user: dan tags: fts3-matchinfo-y) | |
2015-05-05
| ||
20:39 | Add the fts3 matchinfo 'b' flag. (check-in: b9b77972 user: dan tags: fts3-matchinfo-y) | |
19:37 | Optimizations for the matchinfo() function, particularly the 'y' flag. (check-in: dddd7e18 user: dan tags: fts3-matchinfo-y) | |
18:52 | Remove four lines of superfluous code identified by clang scan-build. (check-in: 04afa3fe user: drh tags: trunk) | |
16:57 | Fix a minor coding inefficiency found during pre-release inspection. (check-in: cc50883d user: drh tags: trunk) | |
11:08 | Add #ifdef statements to test_blob.c so that it will build with SQLITE_OMIT_INCRBLOB. (check-in: b8f090e6 user: drh tags: trunk) | |
10:46 | Spell SQLITE_OMIT_VIRTUALTABLE correctly in a #if in dbstat.c. (check-in: d2cb1bec user: drh tags: trunk) | |
10:03 | Fix a faulty assert() in the btree part of the "PRAGMA page_size = ?" code. (check-in: 90b19748 user: dan tags: trunk) | |
01:09 | Fix a problem in Makefile.in that only comes up on Windows with MinGW. (check-in: 5f3cd68b user: drh tags: trunk) | |
00:48 | Fix #ifdef problem in tclsqlite.c. (check-in: fe723bb5 user: drh tags: trunk) | |
2015-05-04
| ||
20:25 | Automatically enable the dbstat virtual table on all new database connections with the SQLITE_ENABLE_DBSTAT_VTAB compile-time option is used. (check-in: 1c9c6eaa user: drh tags: trunk) | |
19:13 | In the command-line shell, and the ".binary" command and additional C-style backslash escapes. (check-in: 850c1186 user: drh tags: trunk) | |
19:06 | Add the "dbstat" virtual table as a standard component in the SQLite amalgamation, though turned off unless compiled with SQLITE_ENABLE_DBSTAT_VTAB. (check-in: e7529705 user: drh tags: trunk) | |
18:31 | Rename the test_stat.c source file to dbstat.c and rework the makefiles to make dbstat.c a first-class source module. (Closed-Leaf check-in: a24480a4 user: drh tags: dbstat-in-amalgamation) | |
17:06 | Include the "dbstat" virtual table in the amalgamation. (check-in: fc6504aa user: drh tags: dbstat-in-amalgamation) | |
16:09 | Fix a faulty assert() in the SELECT code generator and add a test case to prevent regression. (check-in: 1421c8ff user: drh tags: trunk) | |
15:04 | Fix a bug in --changeset output for sqldiff.exe for floating-point values. Also fix harmless compiler warnings in sqldiff.exe. (check-in: 9f428530 user: drh tags: trunk) | |
13:25 | Add the --lib option to the sqldiff.exe command-line utility. (check-in: a117e8f6 user: drh tags: trunk) | |
12:29 | Add the 'y' flag to the fts3/4 matchinfo() function. (check-in: aef1e8f4 user: dan tags: trunk) | |
2015-05-02
| ||
20:35 | Reorganize some of the fts5 expression parsing code. Improve test coverage of the same. (check-in: c4456dc5 user: dan tags: fts5) | |
19:54 | Improvements to fuzzershell: Avoid excess memory allocations when loading many files. Show the total runtime on final output. Show individual filenames as they are processed even if they are single test-case files. (check-in: 34a722a2 user: drh tags: trunk) | |
17:40 | Add the ".limit" command to the command-line shell. (check-in: 803cb60e user: drh tags: trunk) | |
12:40 | Reorganize some multi-threaded code in vdbesort.c so that full MC/DC test coverage does not depend on the outcome of a race condition. (check-in: 78c7ec95 user: dan tags: trunk) | |
11:45 | Cleanup of the sqlite3StrAccumInit() function. No functionality changes. (check-in: 7952c322 user: drh tags: trunk) | |
09:44 | Add the experimental matchinfo 'y' flag to fts3/4. (Closed-Leaf check-in: 92941609 user: dan tags: fts3-matchinfo-y) | |
2015-05-01
| ||
20:38 | Further improvements to test coverage of fts5 code. (check-in: d4331943 user: dan tags: fts5) | |
20:34 | Enhance the fuzzershell --uniquecases option to output results in order of increasing runtime and to include the runtime in the comment separator of the output. (check-in: 04630b98 user: drh tags: trunk) | |
19:21 | Enhance fuzzershell to accept multiple input files. Add the test/fuzzdata2.txt fuzz test content. (check-in: ab5523aa user: drh tags: trunk) | |
18:00 | Fix an assert in RTREE that would fire if the rtree table is misdeclared. (check-in: 9a45409c user: drh tags: trunk) | |
16:57 | Fix an assert() failure caused by setting "PRAGMA journal_mode=off" on an database in exclusive-mode that has already opened the journal file. (check-in: 40db3e40 user: dan tags: trunk) | |
15:25 | Remove obselete comment text from the description of the Table object. No changes to code. (check-in: 6566b72a user: drh tags: trunk) | |
14:07 | Use the sqlite3Fts3ErrMsg() function to set error message text in FTS3, and to ensure that error messages are not overwritten and thus leaked. (check-in: 605347e0 user: drh tags: trunk) | |
12:14 | Improve test coverage of fts5.c. (check-in: add4f468 user: dan tags: fts5) | |
2015-04-30
| ||
20:35 | Enhance the CLI to initialize the dbstat virtual table if compiled using SQLITE_ENABLE_STAT_VTAB. (check-in: 822dfc00 user: drh tags: trunk) | |
20:33 | Fix a harmless comment typo. (check-in: 012a0c4e user: drh tags: trunk) | |
20:26 | Avoid dropping an error code in test function sqlite3_dbstat_register(). (check-in: 9a9f633f user: dan tags: trunk) | |
13:06 | Modify the mkfuzzdata1.tcl script so that it retains the culled test vectors in the tmp2 subdirectory. (check-in: 431a958f user: drh tags: trunk) | |
12:31 | Fix signed/unsigned comparison compiler warnings. Add the SQLITE_OMIT_RANDOMNESS compile-time option to cause the PRNG to be seeded identically on every run, for testing purposes. (check-in: 93ce2bca user: drh tags: trunk) | |
2015-04-29
| ||
20:54 | Improve fts5 tests. (check-in: c1f07a3a user: dan tags: fts5) | |
16:50 | Use sqlite3_malloc64() in place of sqlite3_malloc() internally. (check-in: 48f553b0 user: drh tags: trunk) | |
00:35 | Improved support for OSTRACE on Windows. (check-in: ca43812b user: drh tags: trunk) | |
2015-04-28
| ||
23:34 | Revise when the sqlite3ErrName() function is defined. (Closed-Leaf check-in: 9e593fb3 user: mistachkin tags: winTest) | |
20:24 | Fix an fts5 bug in handling writes while there are active cursors. (check-in: 07f70955 user: dan tags: fts5) | |
18:35 | Improve coverage of fts5 tests. (check-in: 8e8136f2 user: dan tags: fts5) | |
14:49 | Update the test/fuzzdata1.txt file with the latest cases discovered by AFL. (check-in: f2063f53 user: drh tags: trunk) | |
14:07 | Fix an assert() failure that could occur if the internal sqlite3_rename_parent() SQL scalar function was invoked directly. (check-in: 36e51526 user: dan tags: trunk) | |
14:00 | Fix sqlite3VdbeMakeWritable() to always clear the MEM_Ephem flag. Change the OP_Move opcode to always deephemeralize moved content. (check-in: fbb06727 user: drh tags: trunk) | |