nInput = sqlite3_value_bytes(argv[argc-1]);
  zInput = (const char *)sqlite3_value_text(argv[argc-1]);

  pHash = (Fts3Hash *)sqlite3_user_data(context);
  p = (sqlite3_tokenizer_module *)sqlite3Fts3HashFind(pHash, zName, nName+1);

  if( !p ){
    char *zErr = sqlite3_mprintf("unknown tokenizer: %s", zName);
    sqlite3_result_error(context, zErr, -1);
    sqlite3_free(zErr);
    return;
  }

  pRet = Tcl_NewObj();
  Tcl_IncrRefCount(pRet);

  for(i=1; i<argc-1; i++){

  nInput = sqlite3_value_bytes(argv[argc-1]);
  zInput = (const char *)sqlite3_value_text(argv[argc-1]);

  pHash = (Fts3Hash *)sqlite3_user_data(context);
  p = (sqlite3_tokenizer_module *)sqlite3Fts3HashFind(pHash, zName, nName+1);

  if( !p ){
    char *zErr2 = sqlite3_mprintf("unknown tokenizer: %s", zName);
    sqlite3_result_error(context, zErr2, -1);
    sqlite3_free(zErr2);
    return;
  }

  pRet = Tcl_NewObj();
  Tcl_IncrRefCount(pRet);

  for(i=1; i<argc-1; i++){

  fuzzer_rule *pRule;
  unsigned int h;

  pNew = sqlite3_malloc( sizeof(*pNew) + (int)strlen(zWord) + 1 );
  if( pNew==0 ) return 0;
  memset(pNew, 0, sizeof(*pNew));
  pNew->zBasis = (char*)&pNew[1];
  pNew->nBasis = (int)strlen(zWord);
  memcpy(pNew->zBasis, zWord, pNew->nBasis+1);
  pRule = pCur->pVtab->pRule;
  while( fuzzerSkipRule(pRule, pNew, pCur->iRuleset) ){
    pRule = pRule->pNext;
  }
  pNew->pRule = pRule;
  pNew->n = -1;

  fuzzer_rule *pRule;
  unsigned int h;

  pNew = sqlite3_malloc( sizeof(*pNew) + (int)strlen(zWord) + 1 );
  if( pNew==0 ) return 0;
  memset(pNew, 0, sizeof(*pNew));
  pNew->zBasis = (char*)&pNew[1];
  pNew->nBasis = (fuzzer_len)strlen(zWord);
  memcpy(pNew->zBasis, zWord, pNew->nBasis+1);
  pRule = pCur->pVtab->pRule;
  while( fuzzerSkipRule(pRule, pNew, pCur->iRuleset) ){
    pRule = pRule->pNext;
  }
  pNew->pRule = pRule;
  pNew->n = -1;

      ** should be inserted. This is faster.
      **
      ** If any of the indexed columns use a collation sequence other than
      ** BINARY, this optimization is disabled. This is because the user 
      ** might change the definition of a collation sequence and then run
      ** a VACUUM command. In that case keys may not be written in strictly
      ** sorted order.  */
      int i;
      for(i=0; i<pSrcIdx->nColumn; i++){
        char *zColl = pSrcIdx->azColl[i];
        assert( zColl!=0 );
        if( sqlite3_stricmp("BINARY", zColl) ) break;
      }
      if( i==pSrcIdx->nColumn ){
        useSeekResult = OPFLAG_USESEEKRESULT;

      ** should be inserted. This is faster.
      **
      ** If any of the indexed columns use a collation sequence other than
      ** BINARY, this optimization is disabled. This is because the user 
      ** might change the definition of a collation sequence and then run
      ** a VACUUM command. In that case keys may not be written in strictly
      ** sorted order.  */

      for(i=0; i<pSrcIdx->nColumn; i++){
        char *zColl = pSrcIdx->azColl[i];
        assert( zColl!=0 );
        if( sqlite3_stricmp("BINARY", zColl) ) break;
      }
      if( i==pSrcIdx->nColumn ){
        useSeekResult = OPFLAG_USESEEKRESULT;

  Pager *pPager,                  /* Pager object */
  PgHdr *pList,                   /* List of frames to log */
  Pgno nTruncate,                 /* Database size after this commit */
  int isCommit                    /* True if this is a commit */
){
  int rc;                         /* Return code */
  int nList;                      /* Number of pages in pList */
#if defined(SQLITE_DEBUG) || defined(SQLITE_CHECK_PAGES)
  PgHdr *p;                       /* For looping over pages */
#endif

  assert( pPager->pWal );
  assert( pList );
#ifdef SQLITE_DEBUG
  /* Verify that the page list is in accending order */
  for(p=pList; p && p->pDirty; p=p->pDirty){
    assert( p->pgno < p->pDirty->pgno );
................................................................................

  assert( pList->pDirty==0 || isCommit );
  if( isCommit ){
    /* If a WAL transaction is being committed, there is no point in writing
    ** any pages with page numbers greater than nTruncate into the WAL file.
    ** They will never be read by any client. So remove them from the pDirty
    ** list here. */
    PgHdr *p;
    PgHdr **ppNext = &pList;
    nList = 0;
    for(p=pList; (*ppNext = p)!=0; p=p->pDirty){
      if( p->pgno<=nTruncate ){
        ppNext = &p->pDirty;
        nList++;
      }
................................................................................
  pPager->aStat[PAGER_STAT_WRITE] += nList;

  if( pList->pgno==1 ) pager_write_changecounter(pList);
  rc = sqlite3WalFrames(pPager->pWal, 
      pPager->pageSize, pList, nTruncate, isCommit, pPager->walSyncFlags
  );
  if( rc==SQLITE_OK && pPager->pBackup ){
    PgHdr *p;
    for(p=pList; p; p=p->pDirty){
      sqlite3BackupUpdate(pPager->pBackup, p->pgno, (u8 *)p->pData);
    }
  }

#ifdef SQLITE_CHECK_PAGES
  pList = sqlite3PcacheDirtyList(pPager->pPCache);

  Pager *pPager,                  /* Pager object */
  PgHdr *pList,                   /* List of frames to log */
  Pgno nTruncate,                 /* Database size after this commit */
  int isCommit                    /* True if this is a commit */
){
  int rc;                         /* Return code */
  int nList;                      /* Number of pages in pList */

  PgHdr *p;                       /* For looping over pages */


  assert( pPager->pWal );
  assert( pList );
#ifdef SQLITE_DEBUG
  /* Verify that the page list is in accending order */
  for(p=pList; p && p->pDirty; p=p->pDirty){
    assert( p->pgno < p->pDirty->pgno );
................................................................................

  assert( pList->pDirty==0 || isCommit );
  if( isCommit ){
    /* If a WAL transaction is being committed, there is no point in writing
    ** any pages with page numbers greater than nTruncate into the WAL file.
    ** They will never be read by any client. So remove them from the pDirty
    ** list here. */

    PgHdr **ppNext = &pList;
    nList = 0;
    for(p=pList; (*ppNext = p)!=0; p=p->pDirty){
      if( p->pgno<=nTruncate ){
        ppNext = &p->pDirty;
        nList++;
      }
................................................................................
  pPager->aStat[PAGER_STAT_WRITE] += nList;

  if( pList->pgno==1 ) pager_write_changecounter(pList);
  rc = sqlite3WalFrames(pPager->pWal, 
      pPager->pageSize, pList, nTruncate, isCommit, pPager->walSyncFlags
  );
  if( rc==SQLITE_OK && pPager->pBackup ){

    for(p=pList; p; p=p->pDirty){
      sqlite3BackupUpdate(pPager->pBackup, p->pgno, (u8 *)p->pData);
    }
  }

#ifdef SQLITE_CHECK_PAGES
  pList = sqlite3PcacheDirtyList(pPager->pPCache);

#endif /* SQLITE_PAGER_PRAGMAS */

/*
** Generate code to return a single integer value.
*/
static void returnSingleInt(Parse *pParse, const char *zLabel, i64 value){
  Vdbe *v = sqlite3GetVdbe(pParse);
  int mem = ++pParse->nMem;
  i64 *pI64 = sqlite3DbMallocRaw(pParse->db, sizeof(value));
  if( pI64 ){
    memcpy(pI64, &value, sizeof(value));
  }
  sqlite3VdbeAddOp4(v, OP_Int64, 0, mem, 0, (char*)pI64, P4_INT64);
  sqlite3VdbeSetNumCols(v, 1);
  sqlite3VdbeSetColName(v, 0, COLNAME_NAME, zLabel, SQLITE_STATIC);
  sqlite3VdbeAddOp2(v, OP_ResultRow, mem, 1);
}


/*
** Set the safety_level and pager flags for pager iDb.  Or if iDb<0
** set these values for all pagers.
*/
................................................................................
  aFcntl[1] = zLeft;
  aFcntl[2] = zRight;
  aFcntl[3] = 0;
  db->busyHandler.nBusy = 0;
  rc = sqlite3_file_control(db, zDb, SQLITE_FCNTL_PRAGMA, (void*)aFcntl);
  if( rc==SQLITE_OK ){
    if( aFcntl[0] ){
      int mem = ++pParse->nMem;
      sqlite3VdbeAddOp4(v, OP_String8, 0, mem, 0, aFcntl[0], 0);
      sqlite3VdbeSetNumCols(v, 1);
      sqlite3VdbeSetColName(v, 0, COLNAME_NAME, "result", SQLITE_STATIC);
      sqlite3VdbeAddOp2(v, OP_ResultRow, mem, 1);
      sqlite3_free(aFcntl[0]);
    }
    goto pragma_out;
  }
  if( rc!=SQLITE_NOTFOUND ){
    if( aFcntl[0] ){
      sqlite3ErrorMsg(pParse, "%s", aFcntl[0]);

#endif /* SQLITE_PAGER_PRAGMAS */

/*
** Generate code to return a single integer value.
*/
static void returnSingleInt(Parse *pParse, const char *zLabel, i64 value){
  Vdbe *v = sqlite3GetVdbe(pParse);
  int nMem = ++pParse->nMem;
  i64 *pI64 = sqlite3DbMallocRaw(pParse->db, sizeof(value));
  if( pI64 ){
    memcpy(pI64, &value, sizeof(value));
  }
  sqlite3VdbeAddOp4(v, OP_Int64, 0, nMem, 0, (char*)pI64, P4_INT64);
  sqlite3VdbeSetNumCols(v, 1);
  sqlite3VdbeSetColName(v, 0, COLNAME_NAME, zLabel, SQLITE_STATIC);
  sqlite3VdbeAddOp2(v, OP_ResultRow, nMem, 1);
}


/*
** Set the safety_level and pager flags for pager iDb.  Or if iDb<0
** set these values for all pagers.
*/
................................................................................
  aFcntl[1] = zLeft;
  aFcntl[2] = zRight;
  aFcntl[3] = 0;
  db->busyHandler.nBusy = 0;
  rc = sqlite3_file_control(db, zDb, SQLITE_FCNTL_PRAGMA, (void*)aFcntl);
  if( rc==SQLITE_OK ){
    if( aFcntl[0] ){
      int nMem = ++pParse->nMem;
      sqlite3VdbeAddOp4(v, OP_String8, 0, nMem, 0, aFcntl[0], 0);
      sqlite3VdbeSetNumCols(v, 1);
      sqlite3VdbeSetColName(v, 0, COLNAME_NAME, "result", SQLITE_STATIC);
      sqlite3VdbeAddOp2(v, OP_ResultRow, nMem, 1);
      sqlite3_free(aFcntl[0]);
    }
    goto pragma_out;
  }
  if( rc!=SQLITE_NOTFOUND ){
    if( aFcntl[0] ){
      sqlite3ErrorMsg(pParse, "%s", aFcntl[0]);

static int stdin_is_interactive = 1;

/*
** The following is the open SQLite database.  We make a pointer
** to this database a static variable so that it can be accessed
** by the SIGINT handler to interrupt database processing.
*/
static sqlite3 *db = 0;

/*
** True if an interrupt (Control-C) has been received.
*/
static volatile int seenInterrupt = 0;

/*
................................................................................
/*
** This routine runs when the user presses Ctrl-C
*/
static void interrupt_handler(int NotUsed){
  UNUSED_PARAMETER(NotUsed);
  seenInterrupt++;
  if( seenInterrupt>2 ) exit(1);
  if( db ) sqlite3_interrupt(db);
}
#endif

/*
** This is the callback routine that the shell
** invokes for each row of a query result.
*/
................................................................................
** Make sure the database is open.  If it is not, then open it.  If
** the database fails to open, print an error message and exit.
*/
static void open_db(ShellState *p, int keepAlive){
  if( p->db==0 ){
    sqlite3_initialize();
    sqlite3_open(p->zDbFilename, &p->db);
    db = p->db;
    if( db && sqlite3_errcode(db)==SQLITE_OK ){
      sqlite3_create_function(db, "shellstatic", 0, SQLITE_UTF8, 0,
          shellstaticFunc, 0, 0);
    }
    if( db==0 || SQLITE_OK!=sqlite3_errcode(db) ){
      fprintf(stderr,"Error: unable to open database \"%s\": %s\n", 
          p->zDbFilename, sqlite3_errmsg(db));
      if( keepAlive ) return;
      exit(1);
    }
#ifndef SQLITE_OMIT_LOAD_EXTENSION
    sqlite3_enable_load_extension(p->db, 1);
#endif
    sqlite3_create_function(db, "readfile", 1, SQLITE_UTF8, 0,
                            readfileFunc, 0, 0);
    sqlite3_create_function(db, "writefile", 2, SQLITE_UTF8, 0,
                            writefileFunc, 0, 0);
  }
}

/*
** Do C-language style dequoting.
**
................................................................................
/*
** If an input line begins with "." then invoke this routine to
** process that line.
**
** Return 1 on error, 2 to exit, and 0 otherwise.
*/
static int do_meta_command(char *zLine, ShellState *p){
  int i = 1;
  int nArg = 0;
  int n, c;
  int rc = 0;
  char *azArg[50];

  /* Parse the input line into tokens.
  */
  while( zLine[i] && nArg<ArraySize(azArg) ){
    while( IsSpace(zLine[i]) ){ i++; }
    if( zLine[i]==0 ) break;
    if( zLine[i]=='\'' || zLine[i]=='"' ){
      int delim = zLine[i++];
      azArg[nArg++] = &zLine[i];
      while( zLine[i] && zLine[i]!=delim ){ 
        if( zLine[i]=='\\' && delim=='"' && zLine[i+1]!=0 ) i++;
        i++; 
      }
      if( zLine[i]==delim ){
        zLine[i++] = 0;
      }
      if( delim=='"' ) resolve_backslashes(azArg[nArg-1]);
    }else{
      azArg[nArg++] = &zLine[i];
      while( zLine[i] && !IsSpace(zLine[i]) ){ i++; }
      if( zLine[i] ) zLine[i++] = 0;
      resolve_backslashes(azArg[nArg-1]);
    }
  }

  /* Process the input line.
  */
  if( nArg==0 ) return 0; /* no tokens, no error */
................................................................................
      fprintf(stderr, "Error: out of memory\n");
      xCloser(sCtx.in);
      return 1;
    }
    nByte = strlen30(zSql);
    rc = sqlite3_prepare_v2(p->db, zSql, -1, &pStmt, 0);
    import_append_char(&sCtx, 0);    /* To ensure sCtx.z is allocated */
    if( rc && sqlite3_strglob("no such table: *", sqlite3_errmsg(db))==0 ){
      char *zCreate = sqlite3_mprintf("CREATE TABLE %s", zTable);
      char cSep = '(';
      while( xRead(&sCtx) ){
        zCreate = sqlite3_mprintf("%z%c\n  \"%s\" TEXT", zCreate, cSep, sCtx.z);
        cSep = ',';
        if( sCtx.cTerm!=sCtx.cColSep ) break;
      }
................................................................................
        return 1;
      }
      zCreate = sqlite3_mprintf("%z\n)", zCreate);
      rc = sqlite3_exec(p->db, zCreate, 0, 0, 0);
      sqlite3_free(zCreate);
      if( rc ){
        fprintf(stderr, "CREATE TABLE %s(...) failed: %s\n", zTable,
                sqlite3_errmsg(db));
        sqlite3_free(sCtx.z);
        xCloser(sCtx.in);
        return 1;
      }
      rc = sqlite3_prepare_v2(p->db, zSql, -1, &pStmt, 0);
    }
    sqlite3_free(zSql);
    if( rc ){
      if (pStmt) sqlite3_finalize(pStmt);
      fprintf(stderr,"Error: %s\n", sqlite3_errmsg(db));
      xCloser(sCtx.in);
      return 1;
    }
    nCol = sqlite3_column_count(pStmt);
    sqlite3_finalize(pStmt);
    pStmt = 0;
    if( nCol==0 ) return 0; /* no columns, no error */
................................................................................
      zSql[j++] = '?';
    }
    zSql[j++] = ')';
    zSql[j] = 0;
    rc = sqlite3_prepare_v2(p->db, zSql, -1, &pStmt, 0);
    sqlite3_free(zSql);
    if( rc ){
      fprintf(stderr, "Error: %s\n", sqlite3_errmsg(db));
      if (pStmt) sqlite3_finalize(pStmt);
      xCloser(sCtx.in);
      return 1;
    }
    needCommit = sqlite3_get_autocommit(db);
    if( needCommit ) sqlite3_exec(db, "BEGIN", 0, 0, 0);
    do{
      int startLine = sCtx.nLine;
      for(i=0; i<nCol; i++){
        char *z = xRead(&sCtx);
        /*
        ** Did we reach end-of-file before finding any columns?
        ** If so, stop instead of NULL filling the remaining columns.
................................................................................
                        sCtx.zFile, startLine, nCol, i);
      }
      if( i>=nCol ){
        sqlite3_step(pStmt);
        rc = sqlite3_reset(pStmt);
        if( rc!=SQLITE_OK ){
          fprintf(stderr, "%s:%d: INSERT failed: %s\n", sCtx.zFile, startLine,
                  sqlite3_errmsg(db));
        }
      }
    }while( sCtx.cTerm!=EOF );

    xCloser(sCtx.in);
    sqlite3_free(sCtx.z);
    sqlite3_finalize(pStmt);
    if( needCommit ) sqlite3_exec(db, "COMMIT", 0, 0, 0);
  }else

  if( c=='i' && (strncmp(azArg[0], "indices", n)==0
                 || strncmp(azArg[0], "indexes", n)==0) ){
    ShellState data;
    char *zErrMsg = 0;
    open_db(p, 0);
................................................................................
      sqlite3_bind_text(pStmt, 1, azArg[1], -1, SQLITE_TRANSIENT);
    }else{
      sqlite3_bind_text(pStmt, 1, "%", -1, SQLITE_STATIC);
    }
    while( sqlite3_step(pStmt)==SQLITE_ROW ){
      if( nRow>=nAlloc ){
        char **azNew;
        int n = nAlloc*2 + 10;
        azNew = sqlite3_realloc(azResult, sizeof(azResult[0])*n);
        if( azNew==0 ){
          fprintf(stderr, "Error: out of memory\n");
          break;
        }
        nAlloc = n;
        azResult = azNew;
      }
      azResult[nRow] = sqlite3_mprintf("%s", sqlite3_column_text(pStmt, 0));
      if( azResult[nRow] ) nRow++;
    }
    sqlite3_finalize(pStmt);        
    if( nRow>0 ){
................................................................................
      { "iskeyword",             SQLITE_TESTCTRL_ISKEYWORD              },
      { "scratchmalloc",         SQLITE_TESTCTRL_SCRATCHMALLOC          },
      { "byteorder",             SQLITE_TESTCTRL_BYTEORDER              },
      { "never_corrupt",         SQLITE_TESTCTRL_NEVER_CORRUPT          },
      { "imposter",              SQLITE_TESTCTRL_IMPOSTER               },
    };
    int testctrl = -1;
    int rc = 0;
    int i, n;
    open_db(p, 0);

    /* convert testctrl text option to value. allow any unique prefix
    ** of the option name, or a numerical value. */
    n = strlen30(azArg[1]);
    for(i=0; i<(int)(sizeof(aCtrl)/sizeof(aCtrl[0])); i++){
      if( strncmp(azArg[1], aCtrl[i].zCtrlName, n)==0 ){
        if( testctrl<0 ){
          testctrl = aCtrl[i].ctrlCode;
        }else{
          fprintf(stderr, "ambiguous option name: \"%s\"\n", azArg[1]);
          testctrl = -1;
          break;
        }
................................................................................
      switch(testctrl){

        /* sqlite3_test_control(int, db, int) */
        case SQLITE_TESTCTRL_OPTIMIZATIONS:
        case SQLITE_TESTCTRL_RESERVE:             
          if( nArg==3 ){
            int opt = (int)strtol(azArg[2], 0, 0);        
            rc = sqlite3_test_control(testctrl, p->db, opt);
            fprintf(p->out, "%d (0x%08x)\n", rc, rc);
          } else {
            fprintf(stderr,"Error: testctrl %s takes a single int option\n",
                    azArg[1]);
          }
          break;

        /* sqlite3_test_control(int) */
        case SQLITE_TESTCTRL_PRNG_SAVE:
        case SQLITE_TESTCTRL_PRNG_RESTORE:
        case SQLITE_TESTCTRL_PRNG_RESET:
        case SQLITE_TESTCTRL_BYTEORDER:
          if( nArg==2 ){
            rc = sqlite3_test_control(testctrl);
            fprintf(p->out, "%d (0x%08x)\n", rc, rc);
          } else {
            fprintf(stderr,"Error: testctrl %s takes no options\n", azArg[1]);
          }
          break;

        /* sqlite3_test_control(int, uint) */
        case SQLITE_TESTCTRL_PENDING_BYTE:        
          if( nArg==3 ){
            unsigned int opt = (unsigned int)integerValue(azArg[2]);
            rc = sqlite3_test_control(testctrl, opt);
            fprintf(p->out, "%d (0x%08x)\n", rc, rc);
          } else {
            fprintf(stderr,"Error: testctrl %s takes a single unsigned"
                           " int option\n", azArg[1]);
          }
          break;
          
        /* sqlite3_test_control(int, int) */
        case SQLITE_TESTCTRL_ASSERT:              
        case SQLITE_TESTCTRL_ALWAYS:      
        case SQLITE_TESTCTRL_NEVER_CORRUPT:        
          if( nArg==3 ){
            int opt = booleanValue(azArg[2]);        
            rc = sqlite3_test_control(testctrl, opt);
            fprintf(p->out, "%d (0x%08x)\n", rc, rc);
          } else {
            fprintf(stderr,"Error: testctrl %s takes a single int option\n",
                            azArg[1]);
          }
          break;

        /* sqlite3_test_control(int, char *) */
#ifdef SQLITE_N_KEYWORD
        case SQLITE_TESTCTRL_ISKEYWORD:           
          if( nArg==3 ){
            const char *opt = azArg[2];        
            rc = sqlite3_test_control(testctrl, opt);
            fprintf(p->out, "%d (0x%08x)\n", rc, rc);
          } else {
            fprintf(stderr,"Error: testctrl %s takes a single char * option\n",
                            azArg[1]);
          }
          break;
#endif

        case SQLITE_TESTCTRL_IMPOSTER:
          if( nArg==5 ){
            rc = sqlite3_test_control(testctrl, p->db, 
                          azArg[2],
                          integerValue(azArg[3]),
                          integerValue(azArg[4]));
            fprintf(p->out, "%d (0x%08x)\n", rc, rc);
          }else{
            fprintf(stderr,"Usage: .testctrl imposter dbName onoff tnum\n");
          }
          break;

        case SQLITE_TESTCTRL_BITVEC_TEST:         
        case SQLITE_TESTCTRL_FAULT_INSTALL:       

static int stdin_is_interactive = 1;

/*
** The following is the open SQLite database.  We make a pointer
** to this database a static variable so that it can be accessed
** by the SIGINT handler to interrupt database processing.
*/
static sqlite3 *globalDb = 0;

/*
** True if an interrupt (Control-C) has been received.
*/
static volatile int seenInterrupt = 0;

/*
................................................................................
/*
** This routine runs when the user presses Ctrl-C
*/
static void interrupt_handler(int NotUsed){
  UNUSED_PARAMETER(NotUsed);
  seenInterrupt++;
  if( seenInterrupt>2 ) exit(1);
  if( globalDb ) sqlite3_interrupt(globalDb);
}
#endif

/*
** This is the callback routine that the shell
** invokes for each row of a query result.
*/
................................................................................
** Make sure the database is open.  If it is not, then open it.  If
** the database fails to open, print an error message and exit.
*/
static void open_db(ShellState *p, int keepAlive){
  if( p->db==0 ){
    sqlite3_initialize();
    sqlite3_open(p->zDbFilename, &p->db);
    globalDb = p->db;
    if( p->db && sqlite3_errcode(p->db)==SQLITE_OK ){
      sqlite3_create_function(p->db, "shellstatic", 0, SQLITE_UTF8, 0,
          shellstaticFunc, 0, 0);
    }
    if( p->db==0 || SQLITE_OK!=sqlite3_errcode(p->db) ){
      fprintf(stderr,"Error: unable to open database \"%s\": %s\n", 
          p->zDbFilename, sqlite3_errmsg(p->db));
      if( keepAlive ) return;
      exit(1);
    }
#ifndef SQLITE_OMIT_LOAD_EXTENSION
    sqlite3_enable_load_extension(p->db, 1);
#endif
    sqlite3_create_function(p->db, "readfile", 1, SQLITE_UTF8, 0,
                            readfileFunc, 0, 0);
    sqlite3_create_function(p->db, "writefile", 2, SQLITE_UTF8, 0,
                            writefileFunc, 0, 0);
  }
}

/*
** Do C-language style dequoting.
**
................................................................................
/*
** If an input line begins with "." then invoke this routine to
** process that line.
**
** Return 1 on error, 2 to exit, and 0 otherwise.
*/
static int do_meta_command(char *zLine, ShellState *p){
  int h = 1;
  int nArg = 0;
  int n, c;
  int rc = 0;
  char *azArg[50];

  /* Parse the input line into tokens.
  */
  while( zLine[h] && nArg<ArraySize(azArg) ){
    while( IsSpace(zLine[h]) ){ h++; }
    if( zLine[h]==0 ) break;
    if( zLine[h]=='\'' || zLine[h]=='"' ){
      int delim = zLine[h++];
      azArg[nArg++] = &zLine[h];
      while( zLine[h] && zLine[h]!=delim ){ 
        if( zLine[h]=='\\' && delim=='"' && zLine[h+1]!=0 ) h++;
        h++; 
      }
      if( zLine[h]==delim ){
        zLine[h++] = 0;
      }
      if( delim=='"' ) resolve_backslashes(azArg[nArg-1]);
    }else{
      azArg[nArg++] = &zLine[h];
      while( zLine[h] && !IsSpace(zLine[h]) ){ h++; }
      if( zLine[h] ) zLine[h++] = 0;
      resolve_backslashes(azArg[nArg-1]);
    }
  }

  /* Process the input line.
  */
  if( nArg==0 ) return 0; /* no tokens, no error */
................................................................................
      fprintf(stderr, "Error: out of memory\n");
      xCloser(sCtx.in);
      return 1;
    }
    nByte = strlen30(zSql);
    rc = sqlite3_prepare_v2(p->db, zSql, -1, &pStmt, 0);
    import_append_char(&sCtx, 0);    /* To ensure sCtx.z is allocated */
    if( rc && sqlite3_strglob("no such table: *", sqlite3_errmsg(p->db))==0 ){
      char *zCreate = sqlite3_mprintf("CREATE TABLE %s", zTable);
      char cSep = '(';
      while( xRead(&sCtx) ){
        zCreate = sqlite3_mprintf("%z%c\n  \"%s\" TEXT", zCreate, cSep, sCtx.z);
        cSep = ',';
        if( sCtx.cTerm!=sCtx.cColSep ) break;
      }
................................................................................
        return 1;
      }
      zCreate = sqlite3_mprintf("%z\n)", zCreate);
      rc = sqlite3_exec(p->db, zCreate, 0, 0, 0);
      sqlite3_free(zCreate);
      if( rc ){
        fprintf(stderr, "CREATE TABLE %s(...) failed: %s\n", zTable,
                sqlite3_errmsg(p->db));
        sqlite3_free(sCtx.z);
        xCloser(sCtx.in);
        return 1;
      }
      rc = sqlite3_prepare_v2(p->db, zSql, -1, &pStmt, 0);
    }
    sqlite3_free(zSql);
    if( rc ){
      if (pStmt) sqlite3_finalize(pStmt);
      fprintf(stderr,"Error: %s\n", sqlite3_errmsg(p->db));
      xCloser(sCtx.in);
      return 1;
    }
    nCol = sqlite3_column_count(pStmt);
    sqlite3_finalize(pStmt);
    pStmt = 0;
    if( nCol==0 ) return 0; /* no columns, no error */
................................................................................
      zSql[j++] = '?';
    }
    zSql[j++] = ')';
    zSql[j] = 0;
    rc = sqlite3_prepare_v2(p->db, zSql, -1, &pStmt, 0);
    sqlite3_free(zSql);
    if( rc ){
      fprintf(stderr, "Error: %s\n", sqlite3_errmsg(p->db));
      if (pStmt) sqlite3_finalize(pStmt);
      xCloser(sCtx.in);
      return 1;
    }
    needCommit = sqlite3_get_autocommit(p->db);
    if( needCommit ) sqlite3_exec(p->db, "BEGIN", 0, 0, 0);
    do{
      int startLine = sCtx.nLine;
      for(i=0; i<nCol; i++){
        char *z = xRead(&sCtx);
        /*
        ** Did we reach end-of-file before finding any columns?
        ** If so, stop instead of NULL filling the remaining columns.
................................................................................
                        sCtx.zFile, startLine, nCol, i);
      }
      if( i>=nCol ){
        sqlite3_step(pStmt);
        rc = sqlite3_reset(pStmt);
        if( rc!=SQLITE_OK ){
          fprintf(stderr, "%s:%d: INSERT failed: %s\n", sCtx.zFile, startLine,
                  sqlite3_errmsg(p->db));
        }
      }
    }while( sCtx.cTerm!=EOF );

    xCloser(sCtx.in);
    sqlite3_free(sCtx.z);
    sqlite3_finalize(pStmt);
    if( needCommit ) sqlite3_exec(p->db, "COMMIT", 0, 0, 0);
  }else

  if( c=='i' && (strncmp(azArg[0], "indices", n)==0
                 || strncmp(azArg[0], "indexes", n)==0) ){
    ShellState data;
    char *zErrMsg = 0;
    open_db(p, 0);
................................................................................
      sqlite3_bind_text(pStmt, 1, azArg[1], -1, SQLITE_TRANSIENT);
    }else{
      sqlite3_bind_text(pStmt, 1, "%", -1, SQLITE_STATIC);
    }
    while( sqlite3_step(pStmt)==SQLITE_ROW ){
      if( nRow>=nAlloc ){
        char **azNew;
        int n2 = nAlloc*2 + 10;
        azNew = sqlite3_realloc(azResult, sizeof(azResult[0])*n2);
        if( azNew==0 ){
          fprintf(stderr, "Error: out of memory\n");
          break;
        }
        nAlloc = n2;
        azResult = azNew;
      }
      azResult[nRow] = sqlite3_mprintf("%s", sqlite3_column_text(pStmt, 0));
      if( azResult[nRow] ) nRow++;
    }
    sqlite3_finalize(pStmt);        
    if( nRow>0 ){
................................................................................
      { "iskeyword",             SQLITE_TESTCTRL_ISKEYWORD              },
      { "scratchmalloc",         SQLITE_TESTCTRL_SCRATCHMALLOC          },
      { "byteorder",             SQLITE_TESTCTRL_BYTEORDER              },
      { "never_corrupt",         SQLITE_TESTCTRL_NEVER_CORRUPT          },
      { "imposter",              SQLITE_TESTCTRL_IMPOSTER               },
    };
    int testctrl = -1;
    int rc2 = 0;
    int i, n2;
    open_db(p, 0);

    /* convert testctrl text option to value. allow any unique prefix
    ** of the option name, or a numerical value. */
    n2 = strlen30(azArg[1]);
    for(i=0; i<(int)(sizeof(aCtrl)/sizeof(aCtrl[0])); i++){
      if( strncmp(azArg[1], aCtrl[i].zCtrlName, n2)==0 ){
        if( testctrl<0 ){
          testctrl = aCtrl[i].ctrlCode;
        }else{
          fprintf(stderr, "ambiguous option name: \"%s\"\n", azArg[1]);
          testctrl = -1;
          break;
        }
................................................................................
      switch(testctrl){

        /* sqlite3_test_control(int, db, int) */
        case SQLITE_TESTCTRL_OPTIMIZATIONS:
        case SQLITE_TESTCTRL_RESERVE:             
          if( nArg==3 ){
            int opt = (int)strtol(azArg[2], 0, 0);        
            rc2 = sqlite3_test_control(testctrl, p->db, opt);
            fprintf(p->out, "%d (0x%08x)\n", rc2, rc2);
          } else {
            fprintf(stderr,"Error: testctrl %s takes a single int option\n",
                    azArg[1]);
          }
          break;

        /* sqlite3_test_control(int) */
        case SQLITE_TESTCTRL_PRNG_SAVE:
        case SQLITE_TESTCTRL_PRNG_RESTORE:
        case SQLITE_TESTCTRL_PRNG_RESET:
        case SQLITE_TESTCTRL_BYTEORDER:
          if( nArg==2 ){
            rc2 = sqlite3_test_control(testctrl);
            fprintf(p->out, "%d (0x%08x)\n", rc2, rc2);
          } else {
            fprintf(stderr,"Error: testctrl %s takes no options\n", azArg[1]);
          }
          break;

        /* sqlite3_test_control(int, uint) */
        case SQLITE_TESTCTRL_PENDING_BYTE:        
          if( nArg==3 ){
            unsigned int opt = (unsigned int)integerValue(azArg[2]);
            rc2 = sqlite3_test_control(testctrl, opt);
            fprintf(p->out, "%d (0x%08x)\n", rc2, rc2);
          } else {
            fprintf(stderr,"Error: testctrl %s takes a single unsigned"
                           " int option\n", azArg[1]);
          }
          break;
          
        /* sqlite3_test_control(int, int) */
        case SQLITE_TESTCTRL_ASSERT:              
        case SQLITE_TESTCTRL_ALWAYS:      
        case SQLITE_TESTCTRL_NEVER_CORRUPT:        
          if( nArg==3 ){
            int opt = booleanValue(azArg[2]);        
            rc2 = sqlite3_test_control(testctrl, opt);
            fprintf(p->out, "%d (0x%08x)\n", rc2, rc2);
          } else {
            fprintf(stderr,"Error: testctrl %s takes a single int option\n",
                            azArg[1]);
          }
          break;

        /* sqlite3_test_control(int, char *) */
#ifdef SQLITE_N_KEYWORD
        case SQLITE_TESTCTRL_ISKEYWORD:           
          if( nArg==3 ){
            const char *opt = azArg[2];        
            rc2 = sqlite3_test_control(testctrl, opt);
            fprintf(p->out, "%d (0x%08x)\n", rc2, rc2);
          } else {
            fprintf(stderr,"Error: testctrl %s takes a single char * option\n",
                            azArg[1]);
          }
          break;
#endif

        case SQLITE_TESTCTRL_IMPOSTER:
          if( nArg==5 ){
            rc2 = sqlite3_test_control(testctrl, p->db, 
                          azArg[2],
                          integerValue(azArg[3]),
                          integerValue(azArg[4]));
            fprintf(p->out, "%d (0x%08x)\n", rc2, rc2);
          }else{
            fprintf(stderr,"Usage: .testctrl imposter dbName onoff tnum\n");
          }
          break;

        case SQLITE_TESTCTRL_BITVEC_TEST:         
        case SQLITE_TESTCTRL_FAULT_INSTALL:       

    const char *zVar = sqlite3_bind_parameter_name(pStmt, i);
    if( zVar!=0 && (zVar[0]=='$' || zVar[0]==':' || zVar[0]=='@') ){
      Tcl_Obj *pVar = Tcl_GetVar2Ex(interp, &zVar[1], 0, 0);
      if( pVar ){
        int n;
        u8 *data;
        const char *zType = (pVar->typePtr ? pVar->typePtr->name : "");
        char c = zType[0];
        if( zVar[0]=='@' ||
           (c=='b' && strcmp(zType,"bytearray")==0 && pVar->bytes==0) ){
          /* Load a BLOB type if the Tcl variable is a bytearray and
          ** it has no string representation or the host
          ** parameter name begins with "@". */
          data = Tcl_GetByteArrayFromObj(pVar, &n);
          sqlite3_bind_blob(pStmt, i, data, n, SQLITE_STATIC);
................................................................................
      dbEvalFinalize(&sEval);
      if( rc==TCL_BREAK ){
        Tcl_SetObjResult(interp, pRet);
        rc = TCL_OK;
      }
      Tcl_DecrRefCount(pRet);
    }else{
      ClientData cd[2];
      DbEvalContext *p;
      Tcl_Obj *pArray = 0;
      Tcl_Obj *pScript;

      if( objc==5 && *(char *)Tcl_GetString(objv[3]) ){
        pArray = objv[3];
      }
      pScript = objv[objc-1];
      Tcl_IncrRefCount(pScript);
      
      p = (DbEvalContext *)Tcl_Alloc(sizeof(DbEvalContext));
      dbEvalInit(p, pDb, objv[2], pArray);

      cd[0] = (void *)p;
      cd[1] = (void *)pScript;
      rc = DbEvalNextCmd(cd, interp, TCL_OK);
    }
    break;
  }

  /*
  **     $db function NAME [-argcount N] [-deterministic] SCRIPT
  **

    const char *zVar = sqlite3_bind_parameter_name(pStmt, i);
    if( zVar!=0 && (zVar[0]=='$' || zVar[0]==':' || zVar[0]=='@') ){
      Tcl_Obj *pVar = Tcl_GetVar2Ex(interp, &zVar[1], 0, 0);
      if( pVar ){
        int n;
        u8 *data;
        const char *zType = (pVar->typePtr ? pVar->typePtr->name : "");
        c = zType[0];
        if( zVar[0]=='@' ||
           (c=='b' && strcmp(zType,"bytearray")==0 && pVar->bytes==0) ){
          /* Load a BLOB type if the Tcl variable is a bytearray and
          ** it has no string representation or the host
          ** parameter name begins with "@". */
          data = Tcl_GetByteArrayFromObj(pVar, &n);
          sqlite3_bind_blob(pStmt, i, data, n, SQLITE_STATIC);
................................................................................
      dbEvalFinalize(&sEval);
      if( rc==TCL_BREAK ){
        Tcl_SetObjResult(interp, pRet);
        rc = TCL_OK;
      }
      Tcl_DecrRefCount(pRet);
    }else{
      ClientData cd2[2];
      DbEvalContext *p;
      Tcl_Obj *pArray = 0;
      Tcl_Obj *pScript;

      if( objc==5 && *(char *)Tcl_GetString(objv[3]) ){
        pArray = objv[3];
      }
      pScript = objv[objc-1];
      Tcl_IncrRefCount(pScript);
      
      p = (DbEvalContext *)Tcl_Alloc(sizeof(DbEvalContext));
      dbEvalInit(p, pDb, objv[2], pArray);

      cd2[0] = (void *)p;
      cd2[1] = (void *)pScript;
      rc = DbEvalNextCmd(cd2, interp, TCL_OK);
    }
    break;
  }

  /*
  **     $db function NAME [-argcount N] [-deterministic] SCRIPT
  **

    if( rc==SQLITE_OK ){
      rc = sqlite3_config(SQLITE_CONFIG_MALLOC, &m);
    }
    sqlite3_test_control(SQLITE_TESTCTRL_BENIGN_MALLOC_HOOKS, 
        faultsimBeginBenign, faultsimEndBenign
    );
  }else{
    sqlite3_mem_methods m;
    assert(memfault.m.xMalloc);

    /* One should be able to reset the default memory allocator by storing
    ** a zeroed allocator then calling GETMALLOC. */
    memset(&m, 0, sizeof(m));
    sqlite3_config(SQLITE_CONFIG_MALLOC, &m);
    sqlite3_config(SQLITE_CONFIG_GETMALLOC, &m);
    assert( memcmp(&m, &memfault.m, sizeof(m))==0 );

    rc = sqlite3_config(SQLITE_CONFIG_MALLOC, &memfault.m);
    sqlite3_test_control(SQLITE_TESTCTRL_BENIGN_MALLOC_HOOKS, 0, 0);
  }

  if( rc==SQLITE_OK ){
    memfault.isInstalled = 1;

    if( rc==SQLITE_OK ){
      rc = sqlite3_config(SQLITE_CONFIG_MALLOC, &m);
    }
    sqlite3_test_control(SQLITE_TESTCTRL_BENIGN_MALLOC_HOOKS, 
        faultsimBeginBenign, faultsimEndBenign
    );
  }else{
    sqlite3_mem_methods m2;
    assert(memfault.m.xMalloc);

    /* One should be able to reset the default memory allocator by storing
    ** a zeroed allocator then calling GETMALLOC. */
    memset(&m2, 0, sizeof(m2));
    sqlite3_config(SQLITE_CONFIG_MALLOC, &m2);
    sqlite3_config(SQLITE_CONFIG_GETMALLOC, &m2);
    assert( memcmp(&m2, &memfault.m, sizeof(m2))==0 );

    rc = sqlite3_config(SQLITE_CONFIG_MALLOC, &memfault.m);
    sqlite3_test_control(SQLITE_TESTCTRL_BENIGN_MALLOC_HOOKS, 0, 0);
  }

  if( rc==SQLITE_OK ){
    memfault.isInstalled = 1;

    pGroup->flags = flags;
    rc = multiplexSubFilename(pGroup, 1);
    if( rc==SQLITE_OK ){
      pSubOpen = multiplexSubOpen(pGroup, 0, &rc, pOutFlags, 0);
      if( pSubOpen==0 && rc==SQLITE_OK ) rc = SQLITE_CANTOPEN;
    }
    if( rc==SQLITE_OK ){
      sqlite3_int64 sz;

      rc = pSubOpen->pMethods->xFileSize(pSubOpen, &sz);
      if( rc==SQLITE_OK && zName ){
        int bExists;
        if( flags & SQLITE_OPEN_MASTER_JOURNAL ){
          pGroup->bEnabled = 0;
        }else
        if( sz==0 ){
          if( flags & SQLITE_OPEN_MAIN_JOURNAL ){
            /* If opening a main journal file and the first chunk is zero
            ** bytes in size, delete any subsequent chunks from the 
            ** file-system. */
            int iChunk = 1;
            do {
              rc = pOrigVfs->xAccess(pOrigVfs, 
................................................................................
          ** larger than the chunk size, that means the chunk size is too small.
          ** But we have no way of determining the intended chunk size, so 
          ** just disable the multiplexor all togethre.
          */
          rc = pOrigVfs->xAccess(pOrigVfs, pGroup->aReal[1].z,
              SQLITE_ACCESS_EXISTS, &bExists);
          bExists = multiplexSubSize(pGroup, 1, &rc)>0;
          if( rc==SQLITE_OK && bExists  && sz==(sz&0xffff0000) && sz>0
              && sz!=pGroup->szChunk ){
            pGroup->szChunk = (int)sz;
          }else if( rc==SQLITE_OK && !bExists && sz>pGroup->szChunk ){
            pGroup->bEnabled = 0;
          }
        }
      }
    }

    if( rc==SQLITE_OK ){

    pGroup->flags = flags;
    rc = multiplexSubFilename(pGroup, 1);
    if( rc==SQLITE_OK ){
      pSubOpen = multiplexSubOpen(pGroup, 0, &rc, pOutFlags, 0);
      if( pSubOpen==0 && rc==SQLITE_OK ) rc = SQLITE_CANTOPEN;
    }
    if( rc==SQLITE_OK ){
      sqlite3_int64 sz64;

      rc = pSubOpen->pMethods->xFileSize(pSubOpen, &sz64);
      if( rc==SQLITE_OK && zName ){
        int bExists;
        if( flags & SQLITE_OPEN_MASTER_JOURNAL ){
          pGroup->bEnabled = 0;
        }else
        if( sz64==0 ){
          if( flags & SQLITE_OPEN_MAIN_JOURNAL ){
            /* If opening a main journal file and the first chunk is zero
            ** bytes in size, delete any subsequent chunks from the 
            ** file-system. */
            int iChunk = 1;
            do {
              rc = pOrigVfs->xAccess(pOrigVfs, 
................................................................................
          ** larger than the chunk size, that means the chunk size is too small.
          ** But we have no way of determining the intended chunk size, so 
          ** just disable the multiplexor all togethre.
          */
          rc = pOrigVfs->xAccess(pOrigVfs, pGroup->aReal[1].z,
              SQLITE_ACCESS_EXISTS, &bExists);
          bExists = multiplexSubSize(pGroup, 1, &rc)>0;
          if( rc==SQLITE_OK && bExists && sz64==(sz64&0xffff0000) && sz64>0
              && sz64!=pGroup->szChunk ){
            pGroup->szChunk = (int)sz64;
          }else if( rc==SQLITE_OK && !bExists && sz64>pGroup->szChunk ){
            pGroup->bEnabled = 0;
          }
        }
      }
    }

    if( rc==SQLITE_OK ){

  fs_file *p = (fs_file *)pFile;
  fs_real_file *pReal = 0;
  int eType;
  int nName;
  int rc = SQLITE_OK;

  if( 0==(flags&(SQLITE_OPEN_MAIN_DB|SQLITE_OPEN_MAIN_JOURNAL)) ){
    tmp_file *p = (tmp_file *)pFile;
    memset(p, 0, sizeof(*p));
    p->base.pMethods = &tmp_io_methods;
    return SQLITE_OK;
  }

  eType = ((flags&(SQLITE_OPEN_MAIN_DB))?DATABASE_FILE:JOURNAL_FILE);
  p->base.pMethods = &fs_io_methods;
  p->eType = eType;

  fs_file *p = (fs_file *)pFile;
  fs_real_file *pReal = 0;
  int eType;
  int nName;
  int rc = SQLITE_OK;

  if( 0==(flags&(SQLITE_OPEN_MAIN_DB|SQLITE_OPEN_MAIN_JOURNAL)) ){
    tmp_file *p2 = (tmp_file *)pFile;
    memset(p2, 0, sizeof(*p2));
    p2->base.pMethods = &tmp_io_methods;
    return SQLITE_OK;
  }

  eType = ((flags&(SQLITE_OPEN_MAIN_DB))?DATABASE_FILE:JOURNAL_FILE);
  p->base.pMethods = &fs_io_methods;
  p->eType = eType;

  }
  if( Tcl_GetIndexFromObj(interp, objv[1], strs, "sub-command", 0, &iSub) ){
    return TCL_ERROR;
  }

  switch( (enum VL_enum)iSub ){
    case VL_ANNOTATE: {
      int rc;
      char *zVfs;
      char *zMsg;
      if( objc!=4 ){
        Tcl_WrongNumArgs(interp, 3, objv, "VFS");
        return TCL_ERROR;
      }
      zVfs = Tcl_GetString(objv[2]);
................................................................................
      if( rc!=SQLITE_OK ){
        Tcl_AppendResult(interp, "failed", 0);
        return TCL_ERROR;
      }
      break;
    }
    case VL_FINALIZE: {
      int rc;
      char *zVfs;
      if( objc!=3 ){
        Tcl_WrongNumArgs(interp, 2, objv, "VFS");
        return TCL_ERROR;
      }
      zVfs = Tcl_GetString(objv[2]);
      rc = sqlite3_vfslog_finalize(zVfs);
................................................................................
        Tcl_AppendResult(interp, "failed", 0);
        return TCL_ERROR;
      }
      break;
    };

    case VL_NEW: {
      int rc;
      char *zVfs;
      char *zParent;
      char *zLog;
      if( objc!=5 ){
        Tcl_WrongNumArgs(interp, 2, objv, "VFS PARENT LOGFILE");
        return TCL_ERROR;
      }

  }
  if( Tcl_GetIndexFromObj(interp, objv[1], strs, "sub-command", 0, &iSub) ){
    return TCL_ERROR;
  }

  switch( (enum VL_enum)iSub ){
    case VL_ANNOTATE: {

      char *zVfs;
      char *zMsg;
      if( objc!=4 ){
        Tcl_WrongNumArgs(interp, 3, objv, "VFS");
        return TCL_ERROR;
      }
      zVfs = Tcl_GetString(objv[2]);
................................................................................
      if( rc!=SQLITE_OK ){
        Tcl_AppendResult(interp, "failed", 0);
        return TCL_ERROR;
      }
      break;
    }
    case VL_FINALIZE: {

      char *zVfs;
      if( objc!=3 ){
        Tcl_WrongNumArgs(interp, 2, objv, "VFS");
        return TCL_ERROR;
      }
      zVfs = Tcl_GetString(objv[2]);
      rc = sqlite3_vfslog_finalize(zVfs);
................................................................................
        Tcl_AppendResult(interp, "failed", 0);
        return TCL_ERROR;
      }
      break;
    };

    case VL_NEW: {

      char *zVfs;
      char *zParent;
      char *zLog;
      if( objc!=5 ){
        Tcl_WrongNumArgs(interp, 2, objv, "VFS PARENT LOGFILE");
        return TCL_ERROR;
      }

    return TCL_ERROR;
  }
  Tcl_ResetResult(interp);

  switch( aSubcmd[i].eCmd ){
    case CMD_SHM: {
      Tcl_Obj *pObj;
      int i, rc;
      TestvfsBuffer *pBuffer;
      char *zName;
      if( objc!=3 && objc!=4 ){
        Tcl_WrongNumArgs(interp, 2, objv, "FILE ?VALUE?");
        return TCL_ERROR;
      }
      zName = ckalloc(p->pParent->mxPathname);
................................................................................
        { "xFullPathname",      TESTVFS_FULLPATHNAME_MASK },
        { "xUnlock",            TESTVFS_UNLOCK_MASK },
        { "xLock",              TESTVFS_LOCK_MASK },
        { "xCheckReservedLock", TESTVFS_CKLOCK_MASK },
      };
      Tcl_Obj **apElem = 0;
      int nElem = 0;
      int i;
      int mask = 0;
      if( objc!=3 ){
        Tcl_WrongNumArgs(interp, 2, objv, "LIST");
        return TCL_ERROR;
      }
      if( Tcl_ListObjGetElements(interp, objv[2], &nElem, &apElem) ){
        return TCL_ERROR;

    return TCL_ERROR;
  }
  Tcl_ResetResult(interp);

  switch( aSubcmd[i].eCmd ){
    case CMD_SHM: {
      Tcl_Obj *pObj;
      int rc;
      TestvfsBuffer *pBuffer;
      char *zName;
      if( objc!=3 && objc!=4 ){
        Tcl_WrongNumArgs(interp, 2, objv, "FILE ?VALUE?");
        return TCL_ERROR;
      }
      zName = ckalloc(p->pParent->mxPathname);
................................................................................
        { "xFullPathname",      TESTVFS_FULLPATHNAME_MASK },
        { "xUnlock",            TESTVFS_UNLOCK_MASK },
        { "xLock",              TESTVFS_LOCK_MASK },
        { "xCheckReservedLock", TESTVFS_CKLOCK_MASK },
      };
      Tcl_Obj **apElem = 0;
      int nElem = 0;

      int mask = 0;
      if( objc!=3 ){
        Tcl_WrongNumArgs(interp, 2, objv, "LIST");
        return TCL_ERROR;
      }
      if( Tcl_ListObjGetElements(interp, objv[2], &nElem, &apElem) ){
        return TCL_ERROR;

  ** finite state machine) an action to ACCEPT if the lookahead is the
  ** start nonterminal.  */
  Action_add(&lemp->sorted[0]->ap,ACCEPT,sp,0);

  /* Resolve conflicts */
  for(i=0; i<lemp->nstate; i++){
    struct action *ap, *nap;
    struct state *stp;
    stp = lemp->sorted[i];
    /* assert( stp->ap ); */
    stp->ap = Action_sort(stp->ap);
    for(ap=stp->ap; ap && ap->next; ap=ap->next){
      for(nap=ap->next; nap && nap->sp==ap->sp; nap=nap->next){
         /* The two actions "ap" and "nap" have the same lookahead.
         ** Figure out which one should be used */
................................................................................
  }
  lineno = 1;
  tplt_xfer(lemp->name,in,out,&lineno);

  /* Generate the include code, if any */
  tplt_print(out,lemp,lemp->include,&lineno);
  if( mhflag ){
    char *name = file_makename(lemp, ".h");
    fprintf(out,"#include \"%s\"\n", name); lineno++;
    free(name);
  }
  tplt_xfer(lemp->name,in,out,&lineno);

  /* Generate #defines for all tokens */
  if( mhflag ){
    const char *prefix;
    fprintf(out,"#if INTERFACE\n"); lineno++;
................................................................................
  }
  fprintf(out, "#endif\n"); lineno++;
  if( mhflag ){
    fprintf(out,"#if INTERFACE\n"); lineno++;
  }
  name = lemp->name ? lemp->name : "Parse";
  if( lemp->arg && lemp->arg[0] ){
    int i;
    i = lemonStrlen(lemp->arg);
    while( i>=1 && isspace(lemp->arg[i-1]) ) i--;
    while( i>=1 && (isalnum(lemp->arg[i-1]) || lemp->arg[i-1]=='_') ) i--;
    fprintf(out,"#define %sARG_SDECL %s;\n",name,lemp->arg);  lineno++;
    fprintf(out,"#define %sARG_PDECL ,%s\n",name,lemp->arg);  lineno++;
    fprintf(out,"#define %sARG_FETCH %s = yypParser->%s\n",
                 name,lemp->arg,&lemp->arg[i]);  lineno++;
................................................................................
      /* Fail because overwrite is not allows. */
      return 0;
    }
    np = np->next;
  }
  if( x1a->count>=x1a->size ){
    /* Need to make the hash table bigger */
    int i,size;
    struct s_x1 array;
    array.size = size = x1a->size*2;
    array.count = x1a->count;
    array.tbl = (x1node*)calloc(size, sizeof(x1node) + sizeof(x1node*));
    if( array.tbl==0 ) return 0;  /* Fail due to malloc failure */
    array.ht = (x1node**)&(array.tbl[size]);
    for(i=0; i<size; i++) array.ht[i] = 0;
    for(i=0; i<x1a->count; i++){
      x1node *oldnp, *newnp;
      oldnp = &(x1a->tbl[i]);
      h = strhash(oldnp->data) & (size-1);
      newnp = &(array.tbl[i]);
      if( array.ht[h] ) array.ht[h]->from = &(newnp->next);
      newnp->next = array.ht[h];
      newnp->data = oldnp->data;
      newnp->from = &(array.ht[h]);
      array.ht[h] = newnp;
    }
................................................................................
      /* Fail because overwrite is not allows. */
      return 0;
    }
    np = np->next;
  }
  if( x2a->count>=x2a->size ){
    /* Need to make the hash table bigger */
    int i,size;
    struct s_x2 array;
    array.size = size = x2a->size*2;
    array.count = x2a->count;
    array.tbl = (x2node*)calloc(size, sizeof(x2node) + sizeof(x2node*));
    if( array.tbl==0 ) return 0;  /* Fail due to malloc failure */
    array.ht = (x2node**)&(array.tbl[size]);
    for(i=0; i<size; i++) array.ht[i] = 0;
    for(i=0; i<x2a->count; i++){
      x2node *oldnp, *newnp;
      oldnp = &(x2a->tbl[i]);
      h = strhash(oldnp->key) & (size-1);
      newnp = &(array.tbl[i]);
      if( array.ht[h] ) array.ht[h]->from = &(newnp->next);
      newnp->next = array.ht[h];
      newnp->key = oldnp->key;
      newnp->data = oldnp->data;
      newnp->from = &(array.ht[h]);
      array.ht[h] = newnp;
................................................................................

/* Return an array of pointers to all data in the table.
** The array is obtained from malloc.  Return NULL if memory allocation
** problems, or if the array is empty. */
struct symbol **Symbol_arrayof()
{
  struct symbol **array;
  int i,size;
  if( x2a==0 ) return 0;
  size = x2a->count;
  array = (struct symbol **)calloc(size, sizeof(struct symbol *));
  if( array ){
    for(i=0; i<size; i++) array[i] = x2a->tbl[i].data;
  }
  return array;
}

/* Compare two configurations */
int Configcmp(const char *_a,const char *_b)
{
................................................................................
      /* Fail because overwrite is not allows. */
      return 0;
    }
    np = np->next;
  }
  if( x3a->count>=x3a->size ){
    /* Need to make the hash table bigger */
    int i,size;
    struct s_x3 array;
    array.size = size = x3a->size*2;
    array.count = x3a->count;
    array.tbl = (x3node*)calloc(size, sizeof(x3node) + sizeof(x3node*));
    if( array.tbl==0 ) return 0;  /* Fail due to malloc failure */
    array.ht = (x3node**)&(array.tbl[size]);
    for(i=0; i<size; i++) array.ht[i] = 0;
    for(i=0; i<x3a->count; i++){
      x3node *oldnp, *newnp;
      oldnp = &(x3a->tbl[i]);
      h = statehash(oldnp->key) & (size-1);
      newnp = &(array.tbl[i]);
      if( array.ht[h] ) array.ht[h]->from = &(newnp->next);
      newnp->next = array.ht[h];
      newnp->key = oldnp->key;
      newnp->data = oldnp->data;
      newnp->from = &(array.ht[h]);
      array.ht[h] = newnp;
................................................................................

/* Return an array of pointers to all data in the table.
** The array is obtained from malloc.  Return NULL if memory allocation
** problems, or if the array is empty. */
struct state **State_arrayof()
{
  struct state **array;
  int i,size;
  if( x3a==0 ) return 0;
  size = x3a->count;
  array = (struct state **)calloc(size, sizeof(struct state *));
  if( array ){
    for(i=0; i<size; i++) array[i] = x3a->tbl[i].data;
  }
  return array;
}

/* Hash a configuration */
PRIVATE unsigned confighash(struct config *a)
{
................................................................................
      /* Fail because overwrite is not allows. */
      return 0;
    }
    np = np->next;
  }
  if( x4a->count>=x4a->size ){
    /* Need to make the hash table bigger */
    int i,size;
    struct s_x4 array;
    array.size = size = x4a->size*2;
    array.count = x4a->count;
    array.tbl = (x4node*)calloc(size, sizeof(x4node) + sizeof(x4node*));
    if( array.tbl==0 ) return 0;  /* Fail due to malloc failure */
    array.ht = (x4node**)&(array.tbl[size]);
    for(i=0; i<size; i++) array.ht[i] = 0;
    for(i=0; i<x4a->count; i++){
      x4node *oldnp, *newnp;
      oldnp = &(x4a->tbl[i]);
      h = confighash(oldnp->data) & (size-1);
      newnp = &(array.tbl[i]);
      if( array.ht[h] ) array.ht[h]->from = &(newnp->next);
      newnp->next = array.ht[h];
      newnp->data = oldnp->data;
      newnp->from = &(array.ht[h]);
      array.ht[h] = newnp;
    }

  ** finite state machine) an action to ACCEPT if the lookahead is the
  ** start nonterminal.  */
  Action_add(&lemp->sorted[0]->ap,ACCEPT,sp,0);

  /* Resolve conflicts */
  for(i=0; i<lemp->nstate; i++){
    struct action *ap, *nap;

    stp = lemp->sorted[i];
    /* assert( stp->ap ); */
    stp->ap = Action_sort(stp->ap);
    for(ap=stp->ap; ap && ap->next; ap=ap->next){
      for(nap=ap->next; nap && nap->sp==ap->sp; nap=nap->next){
         /* The two actions "ap" and "nap" have the same lookahead.
         ** Figure out which one should be used */
................................................................................
  }
  lineno = 1;
  tplt_xfer(lemp->name,in,out,&lineno);

  /* Generate the include code, if any */
  tplt_print(out,lemp,lemp->include,&lineno);
  if( mhflag ){
    char *incName = file_makename(lemp, ".h");
    fprintf(out,"#include \"%s\"\n", incName); lineno++;
    free(incName);
  }
  tplt_xfer(lemp->name,in,out,&lineno);

  /* Generate #defines for all tokens */
  if( mhflag ){
    const char *prefix;
    fprintf(out,"#if INTERFACE\n"); lineno++;
................................................................................
  }
  fprintf(out, "#endif\n"); lineno++;
  if( mhflag ){
    fprintf(out,"#if INTERFACE\n"); lineno++;
  }
  name = lemp->name ? lemp->name : "Parse";
  if( lemp->arg && lemp->arg[0] ){

    i = lemonStrlen(lemp->arg);
    while( i>=1 && isspace(lemp->arg[i-1]) ) i--;
    while( i>=1 && (isalnum(lemp->arg[i-1]) || lemp->arg[i-1]=='_') ) i--;
    fprintf(out,"#define %sARG_SDECL %s;\n",name,lemp->arg);  lineno++;
    fprintf(out,"#define %sARG_PDECL ,%s\n",name,lemp->arg);  lineno++;
    fprintf(out,"#define %sARG_FETCH %s = yypParser->%s\n",
                 name,lemp->arg,&lemp->arg[i]);  lineno++;
................................................................................
      /* Fail because overwrite is not allows. */
      return 0;
    }
    np = np->next;
  }
  if( x1a->count>=x1a->size ){
    /* Need to make the hash table bigger */
    int i,arrSize;
    struct s_x1 array;
    array.size = arrSize = x1a->size*2;
    array.count = x1a->count;
    array.tbl = (x1node*)calloc(arrSize, sizeof(x1node) + sizeof(x1node*));
    if( array.tbl==0 ) return 0;  /* Fail due to malloc failure */
    array.ht = (x1node**)&(array.tbl[arrSize]);
    for(i=0; i<arrSize; i++) array.ht[i] = 0;
    for(i=0; i<x1a->count; i++){
      x1node *oldnp, *newnp;
      oldnp = &(x1a->tbl[i]);
      h = strhash(oldnp->data) & (arrSize-1);
      newnp = &(array.tbl[i]);
      if( array.ht[h] ) array.ht[h]->from = &(newnp->next);
      newnp->next = array.ht[h];
      newnp->data = oldnp->data;
      newnp->from = &(array.ht[h]);
      array.ht[h] = newnp;
    }
................................................................................
      /* Fail because overwrite is not allows. */
      return 0;
    }
    np = np->next;
  }
  if( x2a->count>=x2a->size ){
    /* Need to make the hash table bigger */
    int i,arrSize;
    struct s_x2 array;
    array.size = arrSize = x2a->size*2;
    array.count = x2a->count;
    array.tbl = (x2node*)calloc(arrSize, sizeof(x2node) + sizeof(x2node*));
    if( array.tbl==0 ) return 0;  /* Fail due to malloc failure */
    array.ht = (x2node**)&(array.tbl[arrSize]);
    for(i=0; i<arrSize; i++) array.ht[i] = 0;
    for(i=0; i<x2a->count; i++){
      x2node *oldnp, *newnp;
      oldnp = &(x2a->tbl[i]);
      h = strhash(oldnp->key) & (arrSize-1);
      newnp = &(array.tbl[i]);
      if( array.ht[h] ) array.ht[h]->from = &(newnp->next);
      newnp->next = array.ht[h];
      newnp->key = oldnp->key;
      newnp->data = oldnp->data;
      newnp->from = &(array.ht[h]);
      array.ht[h] = newnp;
................................................................................

/* Return an array of pointers to all data in the table.
** The array is obtained from malloc.  Return NULL if memory allocation
** problems, or if the array is empty. */
struct symbol **Symbol_arrayof()
{
  struct symbol **array;
  int i,arrSize;
  if( x2a==0 ) return 0;
  arrSize = x2a->count;
  array = (struct symbol **)calloc(arrSize, sizeof(struct symbol *));
  if( array ){
    for(i=0; i<arrSize; i++) array[i] = x2a->tbl[i].data;
  }
  return array;
}

/* Compare two configurations */
int Configcmp(const char *_a,const char *_b)
{
................................................................................
      /* Fail because overwrite is not allows. */
      return 0;
    }
    np = np->next;
  }
  if( x3a->count>=x3a->size ){
    /* Need to make the hash table bigger */
    int i,arrSize;
    struct s_x3 array;
    array.size = arrSize = x3a->size*2;
    array.count = x3a->count;
    array.tbl = (x3node*)calloc(arrSize, sizeof(x3node) + sizeof(x3node*));
    if( array.tbl==0 ) return 0;  /* Fail due to malloc failure */
    array.ht = (x3node**)&(array.tbl[arrSize]);
    for(i=0; i<arrSize; i++) array.ht[i] = 0;
    for(i=0; i<x3a->count; i++){
      x3node *oldnp, *newnp;
      oldnp = &(x3a->tbl[i]);
      h = statehash(oldnp->key) & (arrSize-1);
      newnp = &(array.tbl[i]);
      if( array.ht[h] ) array.ht[h]->from = &(newnp->next);
      newnp->next = array.ht[h];
      newnp->key = oldnp->key;
      newnp->data = oldnp->data;
      newnp->from = &(array.ht[h]);
      array.ht[h] = newnp;
................................................................................

/* Return an array of pointers to all data in the table.
** The array is obtained from malloc.  Return NULL if memory allocation
** problems, or if the array is empty. */
struct state **State_arrayof()
{
  struct state **array;
  int i,arrSize;
  if( x3a==0 ) return 0;
  arrSize = x3a->count;
  array = (struct state **)calloc(arrSize, sizeof(struct state *));
  if( array ){
    for(i=0; i<arrSize; i++) array[i] = x3a->tbl[i].data;
  }
  return array;
}

/* Hash a configuration */
PRIVATE unsigned confighash(struct config *a)
{
................................................................................
      /* Fail because overwrite is not allows. */
      return 0;
    }
    np = np->next;
  }
  if( x4a->count>=x4a->size ){
    /* Need to make the hash table bigger */
    int i,arrSize;
    struct s_x4 array;
    array.size = arrSize = x4a->size*2;
    array.count = x4a->count;
    array.tbl = (x4node*)calloc(arrSize, sizeof(x4node) + sizeof(x4node*));
    if( array.tbl==0 ) return 0;  /* Fail due to malloc failure */
    array.ht = (x4node**)&(array.tbl[arrSize]);
    for(i=0; i<arrSize; i++) array.ht[i] = 0;
    for(i=0; i<x4a->count; i++){
      x4node *oldnp, *newnp;
      oldnp = &(x4a->tbl[i]);
      h = confighash(oldnp->data) & (arrSize-1);
      newnp = &(array.tbl[i]);
      if( array.ht[h] ) array.ht[h]->from = &(newnp->next);
      newnp->next = array.ht[h];
      newnp->data = oldnp->data;
      newnp->from = &(array.ht[h]);
      array.ht[h] = newnp;
    }