SQLite

/*
** 2007 August 14
**
** The author disclaims copyright to this source code.  In place of
** a legal notice, here is a blessing:
**
**    May you do good and not evil.
**    May you find forgiveness for yourself and forgive others.
**    May you share freely, never taking more than you give.
**
*************************************************************************
** This file contains the C functions that implement mutexes for win32
**
** $Id: mutex_w32.c,v 1.14 2009/01/30 05:40:27 shane Exp $
*/
#include "sqliteInt.h"

/*
** The code in this file is only used if we are compiling multithreaded
** on a win32 system.
*/

  assert( p->id==SQLITE_MUTEX_RECURSIVE || winMutexNotheld(p) );
  EnterCriticalSection(&p->mutex);
  p->owner = GetCurrentThreadId(); 
  p->nRef++;
}
static int winMutexTry(sqlite3_mutex *p){
  int rc = SQLITE_BUSY;
  UNUSED_PARAMETER(p);
  assert( p->id==SQLITE_MUTEX_RECURSIVE || winMutexNotheld(p) );
  /*
  ** The sqlite3_mutex_try() routine is very rarely used, and when it
  ** is used it is merely an optimization.  So it is OK for it to always
  ** fail.  
  **
  ** The TryEnterCriticalSection() interface is only available on WinNT.

** The pager is used to access a database disk file.  It implements
** atomic commit and rollback through the use of a journal file that
** is separate from the database file.  The pager also implements file
** locking to prevent two processes from writing the same database
** file simultaneously, or one process from reading the database while
** another is writing.
**
** @(#) $Id: pager.c,v 1.560 2009/01/30 05:40:27 shane Exp $
*/
#ifndef SQLITE_OMIT_DISKIO
#include "sqliteInt.h"

/*
** Macros for troubleshooting.  Normally turned off
*/

         && pPager->journalHdr+JOURNAL_HDR_SZ(pPager)!=pPager->journalOff
         && ((szJ - pPager->journalOff) / JOURNAL_PG_SZ(pPager))>0
         && pagerNextJournalPageIsValid(pPager))
    );
    if( nJRec==0 
     && pPager->journalHdr+JOURNAL_HDR_SZ(pPager)==pPager->journalOff
    ){
      nJRec = (u32)((szJ - pPager->journalOff)/JOURNAL_PG_SZ(pPager));
    }
    for(ii=0; rc==SQLITE_OK && ii<nJRec && pPager->journalOff<szJ; ii++){
      rc = pager_playback_one_page(pPager, 1, &pPager->journalOff, 1, pDone);
    }
    assert( rc!=SQLITE_DONE );
  }
  assert( rc!=SQLITE_OK || pPager->journalOff==szJ );

    if( isOpen(pPager->fd) && (rc = sqlite3OsFileSize(pPager->fd, &n)) ){
      pager_error(pPager, rc);
      return rc;
    }
    if( n>0 && n<pPager->pageSize ){
      nPage = 1;
    }else{
      nPage = (Pgno)(n / pPager->pageSize);
    }
    if( pPager->state!=PAGER_UNLOCK ){
      pPager->dbSize = nPage;
      pPager->dbFileSize = nPage;
      pPager->dbSizeValid = 1;
    }
  }

  /* If the current number of pages in the file is greater than the 
  ** configured maximum pager number, increase the allowed limit so
  ** that the file can be read.

    **
    **    + SQLITE_DEFAULT_PAGE_SIZE,
    **    + The value returned by sqlite3OsSectorSize()
    **    + The largest page size that can be written atomically.
    */
    if( rc==SQLITE_OK && !readOnly ){
      setSectorSize(pPager);
      assert(SQLITE_DEFAULT_PAGE_SIZE<=SQLITE_MAX_DEFAULT_PAGE_SIZE);
      if( szPageDflt<pPager->sectorSize ){
        if( pPager->sectorSize>SQLITE_MAX_DEFAULT_PAGE_SIZE ){
          szPageDflt = SQLITE_MAX_DEFAULT_PAGE_SIZE;
        }else{
          szPageDflt = (u16)pPager->sectorSize;
        }
      }
#ifdef SQLITE_ENABLE_ATOMIC_WRITE
      {
        int iDc = sqlite3OsDeviceCharacteristics(pPager->fd);
        int ii;
        assert(SQLITE_IOCAP_ATOMIC512==(512>>8));
        assert(SQLITE_IOCAP_ATOMIC64K==(65536>>8));
        assert(SQLITE_MAX_DEFAULT_PAGE_SIZE<=65536);
        for(ii=szPageDflt; ii<=SQLITE_MAX_DEFAULT_PAGE_SIZE; ii=ii*2){
          if( iDc&(SQLITE_IOCAP_ATOMIC|(ii>>8)) ){
            szPageDflt = ii;
          }
        }
      }
#endif



    }
  }else{
    /* If a temporary file is requested, it is not opened immediately.
    ** In this case we accept the default page size and delay actually
    ** opening the file until the first call to OsWrite().
    **
    ** This branch is also run for an in-memory database. An in-memory

**    May you find forgiveness for yourself and forgive others.
**    May you share freely, never taking more than you give.
**
*************************************************************************
** This file contains code to implement the "sqlite" command line
** utility for accessing SQLite databases.
**
** $Id: shell.c,v 1.199 2009/01/30 05:40:27 shane Exp $
*/
#if defined(_WIN32) || defined(WIN32)
/* This needs to come before any includes for MSVC compiler */
#define _CRT_SECURE_NO_WARNINGS
#endif

#include <stdlib.h>

static void shellstaticFunc(
  sqlite3_context *context,
  int argc,
  sqlite3_value **argv
){
  assert( 0==argc );
  assert( zShellStatic );
  UNUSED_PARAMETER(argc);
  UNUSED_PARAMETER(argv);
  sqlite3_result_text(context, zShellStatic, -1, SQLITE_STATIC);
}


/*
** This routine reads a line of text from FILE in, stores

** This module contains C code that generates VDBE code used to process
** the WHERE clause of SQL statements.  This module is responsible for
** generating the code that loops through a table looking for applicable
** rows.  Indices are selected and used to speed the search when doing
** so is applicable.  Because this module is responsible for selecting
** indices, you might also think of this module as the "query optimizer".
**
** $Id: where.c,v 1.366 2009/01/30 05:40:27 shane Exp $
*/
#include "sqliteInt.h"

/*
** Trace output macros
*/
#if defined(SQLITE_TEST) || defined(SQLITE_DEBUG)

    pLevel->plan = bestPlan.plan;
    if( bestPlan.plan.wsFlags & WHERE_INDEXED ){
      pLevel->iIdxCur = pParse->nTab++;
    }else{
      pLevel->iIdxCur = -1;
    }
    notReady &= ~getMask(pMaskSet, pTabList->a[bestJ].iCursor);
    pLevel->iFrom = (u8)bestJ;

    /* Check that if the table scanned by this loop iteration had an
    ** INDEXED BY clause attached to it, that the named index is being
    ** used for the scan. If not, then query compilation has failed.
    ** Return an error.
    */
    pIdx = pTabList->a[bestJ].pIndex;

    /* If we are not debugging and the reduce action popped at least
    ** one element off the stack, then we can push the new element back
    ** onto the stack here, and skip the stack overflow test in yy_shift().
    ** That gives a significant speed improvement. */
    if( yysize ){
      yypParser->yyidx++;
      yymsp -= yysize-1;
      yymsp->stateno = (YYACTIONTYPE)yyact;
      yymsp->major = (YYCODETYPE)yygoto;
      yymsp->minor = yygotominor;
    }else
#endif
    {
      yy_shift(yypParser,yyact,yygoto,&yygotominor);
    }
  }else{