dnl aclocal.m4 generated automatically by aclocal 1.4-p4


dnl Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
dnl This file is free software; the Free Software Foundation
dnl gives unlimited permission to copy and/or distribute it,
dnl with or without modifications, as long as this notice is preserved.

dnl This program is distributed in the hope that it will be useful,
dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without
dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A
dnl PARTICULAR PURPOSE.

# libtool.m4 - Configure libtool for the host system. -*-Autoconf-*-

# serial 47 AC_PROG_LIBTOOL

builtin([undefine],[symbols])

# AC_PROG_LIBTOOL
# ---------------
AC_DEFUN([AC_PROG_LIBTOOL],
[AC_REQUIRE([_AC_PROG_LIBTOOL])dnl
dnl If AC_PROG_CXX has already been expanded, run AC_LIBTOOL_CXX
dnl immediately, otherwise, hook it in at the end of AC_PROG_CXX.
  AC_PROVIDE_IFELSE([AC_PROG_CXX],
    [AC_LIBTOOL_CXX],
    [define([AC_PROG_CXX], defn([AC_PROG_CXX])[AC_LIBTOOL_CXX
  ])])

dnl Quote A][M_PROG_GCJ so that aclocal doesn't bring it in needlessly.
dnl If either AC_PROG_GCJ or A][M_PROG_GCJ have already been expanded, run
dnl AC_LIBTOOL_GCJ immediately, otherwise, hook it in at the end of both.
  AC_PROVIDE_IFELSE([AC_PROG_GCJ],
    [AC_LIBTOOL_GCJ],
    [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],
      [AC_LIBTOOL_GCJ],
      [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],
	[AC_LIBTOOL_GCJ],
      [ifdef([AC_PROG_GCJ],
	     [define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[AC_LIBTOOL_GCJ])])
       ifdef([A][M_PROG_GCJ],
	     [define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[AC_LIBTOOL_GCJ])])
       ifdef([LT_AC_PROG_GCJ],
	     [define([LT_AC_PROG_GCJ],
                defn([LT_AC_PROG_GCJ])[AC_LIBTOOL_GCJ])])])])
])])# AC_PROG_LIBTOOL


# _AC_PROG_LIBTOOL
# ----------------
AC_DEFUN([_AC_PROG_LIBTOOL],
[AC_REQUIRE([AC_LIBTOOL_SETUP])dnl
AC_BEFORE([$0],[AC_LIBTOOL_CXX])dnl
AC_BEFORE([$0],[AC_LIBTOOL_GCJ])dnl

# This can be used to rebuild libtool when needed
LIBTOOL_DEPS="$ac_aux_dir/ltmain.sh"

# Always use our own libtool.
LIBTOOL='$(SHELL) $(top_builddir)/libtool'
AC_SUBST(LIBTOOL)dnl

# Prevent multiple expansion
define([AC_PROG_LIBTOOL], [])
])# _AC_PROG_LIBTOOL


# AC_LIBTOOL_SETUP
# ----------------
AC_DEFUN([AC_LIBTOOL_SETUP],
[AC_PREREQ(2.50)dnl
AC_REQUIRE([AC_ENABLE_SHARED])dnl
AC_REQUIRE([AC_ENABLE_STATIC])dnl
AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl
AC_REQUIRE([AC_CANONICAL_HOST])dnl
AC_REQUIRE([AC_CANONICAL_BUILD])dnl
AC_REQUIRE([AC_PROG_CC])dnl
AC_REQUIRE([AC_PROG_LD])dnl
AC_REQUIRE([AC_PROG_LD_RELOAD_FLAG])dnl
AC_REQUIRE([AC_PROG_NM])dnl


AC_REQUIRE([AC_PROG_LN_S])dnl
AC_REQUIRE([AC_DEPLIBS_CHECK_METHOD])dnl
# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers!
AC_REQUIRE([AC_OBJEXT])dnl
AC_REQUIRE([AC_EXEEXT])dnl
dnl

AC_LIBTOOL_SYS_MAX_CMD_LEN
AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE
AC_LIBTOOL_OBJDIR

AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl
_LT_AC_PROG_ECHO_BACKSLASH

case $host_os in
aix3*)
  # AIX sometimes has problems with the GCC collect2 program.  For some
  # reason, if we set the COLLECT_NAMES environment variable, the problems
  # vanish in a puff of smoke.
  if test "X${COLLECT_NAMES+set}" != Xset; then
    COLLECT_NAMES=
    export COLLECT_NAMES
  fi
  ;;
esac

# Sed substitution that helps us do robust quoting.  It backslashifies
# metacharacters that are still active within double-quoted strings.
Xsed='sed -e s/^X//'
[sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g']

# Same as above, but do not quote variable references.
[double_quote_subst='s/\([\\"\\`\\\\]\)/\\\1/g']

# Sed substitution to delay expansion of an escaped shell variable in a
# double_quote_subst'ed string.
delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'

# Sed substitution to avoid accidental globbing in evaled expressions
no_glob_subst='s/\*/\\\*/g'

# Constants:
rm="rm -f"

# Global variables:
default_ofile=libtool
can_build_shared=yes

# All known linkers require a `.a' archive for static linking (except M$VC,
# which needs '.lib').
libext=a
ltmain="$ac_aux_dir/ltmain.sh"
ofile="$default_ofile"
with_gnu_ld="$lt_cv_prog_gnu_ld"

AC_CHECK_TOOL(RANLIB, ranlib, :)
AC_CHECK_TOOL(STRIP, strip, :)

old_CC="$CC"
old_CFLAGS="$CFLAGS"

# Set sane defaults for various variables
test -z "$AR" && AR=ar
test -z "$AR_FLAGS" && AR_FLAGS=cru
test -z "$AS" && AS=as
test -z "$CC" && CC=cc
test -z "$LTCC" && LTCC=$CC
test -z "$DLLTOOL" && DLLTOOL=dlltool
test -z "$LD" && LD=ld
test -z "$LN_S" && LN_S="ln -s"
test -z "$MAGIC_CMD" && MAGIC_CMD=file
test -z "$NM" && NM=nm
test -z "$OBJDUMP" && OBJDUMP=objdump
test -z "$RANLIB" && RANLIB=:
test -z "$STRIP" && STRIP=:
test -z "$ac_objext" && ac_objext=o

# Determine commands to create old-style static archives.
old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs'
old_postinstall_cmds='chmod 644 $oldlib'
old_postuninstall_cmds=

if test -n "$RANLIB"; then
  old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
  old_postinstall_cmds="\$RANLIB \$oldlib~$old_postinstall_cmds"
fi

# Only perform the check for file, if the check method requires it
case $deplibs_check_method in
file_magic*)
  if test "$file_magic_cmd" = '$MAGIC_CMD'; then
    AC_PATH_MAGIC
  fi
  ;;
esac




ifdef([AC_PROVIDE_AC_LIBTOOL_DLOPEN], enable_dlopen=yes, enable_dlopen=no)
ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
enable_win32_dll=yes, enable_win32_dll=no)

AC_ARG_ENABLE([libtool-lock],
    [AC_HELP_STRING([--disable-libtool-lock],
        [avoid locking (might break parallel builds)])])
test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes


AC_ARG_WITH([pic],
    [AC_HELP_STRING([--with-pic],
        [try to use only PIC/non-PIC objects @<:@default=use both@:>@])],
    [pic_mode="$withval"],
    [pic_mode=default])
test -z "$pic_mode" && pic_mode=default















# Use C for the default configuration in the libtool script
tagname=






AC_LIBTOOL_LANG_C_CONFIG








































_LT_AC_TAGCONFIG



])# AC_LIBTOOL_SETUP




















# _LT_AC_SYS_COMPILER
# -------------------
AC_DEFUN([_LT_AC_SYS_COMPILER],







[AC_REQUIRE([AC_PROG_CC])dnl





# If no C compiler was specified, use CC.
LTCC=${LTCC-"$CC"}



# Allow CC to be a program name with arguments.
set dummy $CC
compiler="[$]2"
])# _LT_AC_SYS_COMPILER






# _LT_AC_SYS_LIBPATH_AIX
# ----------------------
# Links a minimal program and checks the executable
# for the system default hardcoded library path. In most cases,
# this is /usr/lib:/lib, but when the MPI compilers are used
# the location of the communication and MPI libs are included too.
# If we don't find anything, use the default library path according 
# to the aix ld manual.
AC_DEFUN([_LT_AC_SYS_LIBPATH_AIX],
[AC_LINK_IFELSE(AC_LANG_PROGRAM,[
aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | ${AWK-awk} '/Import File Strings/ { getline; getline; if ($[2] ~ /^\//) print $[2] }'`
# Check for a 64-bit object if we didn't find anything.
if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | ${AWK-awk} '/Import File Strings/ { getline; getline; if ($[2] ~ /^\//) print $[2] }'`; fi],[])
if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
])# _LT_AC_SYS_LIBPATH_AIX







































































































































































# _LT_AC_LIBTOOL_SYS_PATH_SEPARATOR
# ---------------------------------
AC_DEFUN([_LT_AC_LIBTOOL_SYS_PATH_SEPARATOR],
[# Find the correct PATH separator.  Usually this is `:', but
# DJGPP uses `;' like DOS.
if test "X${PATH_SEPARATOR+set}" != Xset; then
  UNAME=${UNAME-`uname 2>/dev/null`}
  case X$UNAME in
    *-DOS) PATH_SEPARATOR=';' ;;
    *)     PATH_SEPARATOR=':' ;;


  esac

fi
])# _LT_AC_LIBTOOL_SYS_PATH_SEPARATOR


# _LT_AC_PROG_ECHO_BACKSLASH
# --------------------------
# Add some code to the start of the generated configure script which
# will find an echo command which doesn't interpret backslashes.
AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH],
[ifdef([AC_DIVERSION_NOTICE], [AC_DIVERT_PUSH(AC_DIVERSION_NOTICE)],
                              [AC_DIVERT_PUSH(NOTICE)])
_LT_AC_LIBTOOL_SYS_PATH_SEPARATOR

# Check that we are running under the correct shell.
SHELL=${CONFIG_SHELL-/bin/sh}

case X$ECHO in
X*--fallback-echo)
................................................................................
  exec $SHELL "[$]0" --no-reexec ${1+"[$]@"}
fi

if test "X[$]1" = X--fallback-echo; then
  # used as fallback echo
  shift
  cat <<EOF
[$]*
EOF
  exit 0
fi

# The HP-UX ksh and POSIX shell print the target directory to stdout
# if CDPATH is set.
if test "X${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi
................................................................................
else
  # The Solaris, AIX, and Digital Unix default echo programs unquote
  # backslashes.  This makes it impossible to quote backslashes using
  #   echo "$something" | sed 's/\\/\\\\/g'
  #
  # So, first we look for a working echo in the user's PATH.

  IFS="${IFS= 	}"; lt_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR}"
  for dir in $PATH /usr/ucb; do
    IFS="$lt_save_ifs"
    if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
       test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
       echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` &&
       test "X$echo_testing_string" = "X$echo_test_string"; then
      echo="$dir/echo"
      break
    fi
  done
  IFS="$lt_save_ifs"

  if test "X$echo" = Xecho; then
    # We didn't find a better echo, so look for alternatives.
    if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' &&
       echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` &&
       test "X$echo_testing_string" = "X$echo_test_string"; then
      # This shell has a builtin print -r that does the trick.
................................................................................
   ECHO="$CONFIG_SHELL \\\$\[$]0 --fallback-echo"
fi

AC_SUBST(ECHO)
AC_DIVERT_POP
])# _LT_AC_PROG_ECHO_BACKSLASH


# _LT_AC_LOCK
# -----------
AC_DEFUN([_LT_AC_LOCK],
[AC_ARG_ENABLE([libtool-lock],
    [AC_HELP_STRING([--disable-libtool-lock],
        [avoid locking (might break parallel builds)])])
test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes

# Some flags need to be propagated to the compiler or linker for good
# libtool support.
case $host in
ia64-*-hpux*)
  # Find out which ABI we are using.
  echo 'int i;' > conftest.$ac_ext
  if AC_TRY_EVAL(ac_compile); then
    case `/usr/bin/file conftest.$ac_objext` in
    *ELF-32*)
      HPUX_IA64_MODE="32"
      ;;
    *ELF-64*)
      HPUX_IA64_MODE="64"
      ;;
    esac
  fi
  rm -rf conftest*
  ;;
*-*-irix6*)
  # Find out which ABI we are using.
  echo '[#]line __oline__ "configure"' > conftest.$ac_ext
  if AC_TRY_EVAL(ac_compile); then
    case `/usr/bin/file conftest.$ac_objext` in
    *32-bit*)
      LD="${LD-ld} -32"
      ;;
    *N32*)
      LD="${LD-ld} -n32"
      ;;
    *64-bit*)
      LD="${LD-ld} -64"
      ;;
    esac
  fi
  rm -rf conftest*
  ;;

*-*-sco3.2v5*)
  # On SCO OpenServer 5, we need -belf to get full-featured binaries.
  SAVE_CFLAGS="$CFLAGS"
  CFLAGS="$CFLAGS -belf"
  AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,
    [AC_LANG_PUSH(C)
     AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])
     AC_LANG_POP])
  if test x"$lt_cv_cc_needs_belf" != x"yes"; then
    # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
    CFLAGS="$SAVE_CFLAGS"
  fi
  ;;
ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
[*-*-cygwin* | *-*-mingw* | *-*-pw32*)
  AC_CHECK_TOOL(DLLTOOL, dlltool, false)
  AC_CHECK_TOOL(AS, as, false)
  AC_CHECK_TOOL(OBJDUMP, objdump, false)

  # recent cygwin and mingw systems supply a stub DllMain which the user
  # can override, but on older systems we have to supply one
  AC_CACHE_CHECK([if libtool should supply DllMain function], lt_cv_need_dllmain,
    [AC_TRY_LINK([],
      [extern int __attribute__((__stdcall__)) DllMain(void*, int, void*);
      DllMain (0, 0, 0);],
      [lt_cv_need_dllmain=no],[lt_cv_need_dllmain=yes])])

  case $host/$CC in
  *-*-cygwin*/gcc*-mno-cygwin*|*-*-mingw*)
    # old mingw systems require "-dll" to link a DLL, while more recent ones
    # require "-mdll"
    SAVE_CFLAGS="$CFLAGS"
    CFLAGS="$CFLAGS -mdll"
    AC_CACHE_CHECK([how to link DLLs], lt_cv_cc_dll_switch,
      [AC_TRY_LINK([], [], [lt_cv_cc_dll_switch=-mdll],[lt_cv_cc_dll_switch=-dll])])
    CFLAGS="$SAVE_CFLAGS" ;;
  *-*-cygwin* | *-*-pw32*)
    # cygwin systems need to pass --dll to the linker, and not link
    # crt.o which will require a WinMain@16 definition.
    lt_cv_cc_dll_switch="-Wl,--dll -nostartfiles" ;;
  esac
  ;;
  ])
esac

need_locks="$enable_libtool_lock"

])# _LT_AC_LOCK


# AC_LIBTOOL_COMPILER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
#		[OUTPUT-FILE], [ACTION-SUCCESS], [ACTION-FAILURE])
# ----------------------------------------------------------------
# Check whether the given compiler option works
AC_DEFUN([AC_LIBTOOL_COMPILER_OPTION],
[AC_CACHE_CHECK([$1], [$2],
  [$2=no
  ifelse([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4])
   save_CFLAGS="$CFLAGS"
   CFLAGS="$CFLAGS $3"
   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
   if (eval $ac_compile 2>conftest.err) && test -s $ac_outfile; then
     # The compiler can only warn and ignore the option if not recognized
     # So say no if there are warnings
     if test -s conftest.err; then
       # Append any errors to the config.log.
       cat conftest.err 1>&AS_MESSAGE_LOG_FD
     else
       $2=yes
     fi
   fi
   $rm conftest*
   CFLAGS="$save_CFLAGS"
])

if test x"[$]$2" = xyes; then
    ifelse([$5], , :, [$5])
else
    ifelse([$6], , :, [$6])
fi
])# AC_LIBTOOL_COMPILER_OPTION


# AC_LIBTOOL_LINKER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
#                          [ACTION-SUCCESS], [ACTION-FAILURE])
# ------------------------------------------------------------
# Check whether the given compiler option works
AC_DEFUN([AC_LIBTOOL_LINKER_OPTION],
[AC_CACHE_CHECK([$1], [$2],
  [$2=no
   save_LDFLAGS="$LDFLAGS"
   LDFLAGS="$LDFLAGS $3"
   echo "$lt_simple_link_test_code" > conftest.$ac_ext
   if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
     # The compiler can only warn and ignore the option if not recognized
     # So say no if there are warnings
     if test -s conftest.err; then
       # Append any errors to the config.log.
       cat conftest.err 1>&AS_MESSAGE_LOG_FD
     else
       $2=yes
     fi
   fi
   $rm conftest* 
   LDFLAGS="$save_LDFLAGS"
])

if test x"[$]$2" = xyes; then
    ifelse([$4], , :, [$4])
else
    ifelse([$5], , :, [$5])
fi
])# AC_LIBTOOL_LINKER_OPTION


# AC_LIBTOOL_SYS_MAX_CMD_LEN
# --------------------------
AC_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN],
[# find the maximum length of command line arguments
AC_MSG_CHECKING([the maximum length of command line arguments])
AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl
  i=0
  testring="ABCD"

  case $host_os in
  msdosdjgpp*) 
    # On DJGPP, this test can blow up pretty badly due to problems in libc
    # (any single argument exceeding 2000 bytes causes a buffer overrun
    # during glob expansion).  Even if it were fixed, the result of this
    # check would be larger than it should be.
    lt_cv_sys_max_cmd_len=12288;    # 12K is about right
    ;;
    
  gnu*) 
    # Under GNU Hurd, this test is not required because there is
    # no limit to the length of command line arguments.
    # Libtool will interpret -1 as no limit whatsoever
    lt_cv_sys_max_cmd_len=-1;
    ;;
    
  *)
    # If test is not a shell built-in, we'll probably end up computing a
    # maximum length that is only half of the actual maximum length, but
    # we can't tell.
    while test "X"`$CONFIG_SHELL [$]0 --fallback-echo "X$testring" 2>/dev/null` \
               = "XX$testring" &&
            new_result=`expr "X$testring" : ".*" 2>&1` &&
            lt_cv_sys_max_cmd_len=$new_result &&
            test $i != 17 # 1/2 MB should be enough
    do
      i=`expr $i + 1`
      testring=$testring$testring
    done
    testring=
    # add a significant safety factor because C++ compilers can tack on massive
    # amounts of additional arguments before passing them to the linker.  1/4
    # should be good.
    len=`expr $lt_cv_sys_max_cmd_len \/ 4`
    lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len - $len`
    ;;
  esac
])
if test -n $lt_cv_sys_max_cmd_len ; then
  AC_MSG_RESULT($lt_cv_sys_max_cmd_len)
else
  AC_MSG_RESULT(none)
fi
])# AC_LIBTOOL_SYS_MAX_CMD_LEN


# _LT_AC_CHECK_DLFCN
# --------------------
AC_DEFUN([_LT_AC_CHECK_DLFCN],
[AC_CHECK_HEADERS(dlfcn.h)dnl
])# _LT_AC_CHECK_DLFCN


# _LT_AC_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE,
#                           ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING)
# ------------------------------------------------------------------
AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF],
[AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl
if test "$cross_compiling" = yes; then :
  [$4]
else

  lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
  lt_status=$lt_dlunknown
  cat > conftest.$ac_ext <<EOF
[#line __oline__ "configure"
#include "confdefs.h"

#if HAVE_DLFCN_H
................................................................................
    # compilation failed
    $3
  fi
fi
rm -fr conftest*
])# _LT_AC_TRY_DLOPEN_SELF


# AC_LIBTOOL_DLOPEN_SELF
# -------------------
AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF],
[AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl
if test "x$enable_dlopen" != xyes; then
  enable_dlopen=unknown
  enable_dlopen_self=unknown
  enable_dlopen_self_static=unknown
else
  lt_cv_dlopen=no
  lt_cv_dlopen_libs=

................................................................................

  cygwin* | mingw* | pw32*)
    lt_cv_dlopen="LoadLibrary"
    lt_cv_dlopen_libs=
   ;;

  *)

    AC_CHECK_FUNC(shl_load, lt_cv_dlopen="shl_load",
      [AC_CHECK_LIB(dld, shl_load,
        [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-dld"],


        [AC_CHECK_LIB(dl, dlopen,
          [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],
          [AC_CHECK_FUNC(dlopen, lt_cv_dlopen="dlopen",
            [AC_CHECK_LIB(svld, dlopen,
             [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"])


	    ])
          ])
        ])

      ])
    ;;
  esac

  if test "x$lt_cv_dlopen" != xno; then
    enable_dlopen=yes
  else
    enable_dlopen=no
  fi

  case $lt_cv_dlopen in
  dlopen)
    save_CPPFLAGS="$CPPFLAGS"

    test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"

    save_LDFLAGS="$LDFLAGS"
    eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"

    save_LIBS="$LIBS"
    LIBS="$lt_cv_dlopen_libs $LIBS"
................................................................................
  case $lt_cv_dlopen_self_static in
  yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;
  *) enable_dlopen_self_static=unknown ;;
  esac
fi
])# AC_LIBTOOL_DLOPEN_SELF








# AC_LIBTOOL_PROG_CC_C_O([TAGNAME])
# ---------------------------------




























































































































































































































































































































# Check to see if options -c and -o are simultaneously supported by compiler
AC_DEFUN([AC_LIBTOOL_PROG_CC_C_O],
[AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl
AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext],
  [_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)],
  [_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=no

   $rm -r conftest 2>/dev/null
   mkdir conftest
   cd conftest

   mkdir out
   ifelse([$1],[],[save_CFLAGS="$CFLAGS"
                   CFLAGS="$CFLAGS -o out/conftest2.$ac_objext"],
          [$1],[CXX],[save_CXXFLAGS="$CXXFLAGS"
                   CXXFLAGS="$CXXFLAGS -o out/conftest2.$ac_objext"],
          [$1],[GCJ],[save_GCJFLAGS="$GCJFLAGS"
                   GCJFLAGS="$GCJFLAGS -o out/conftest2.$ac_objext"])
   echo "$lt_simple_compile_test_code" > conftest.$ac_ext

   # According to Tom Tromey, Ian Lance Taylor reported there are C compilers
   # that will create temporary files in the current directory regardless of
   # the output directory.  Thus, making CWD read-only will cause this test
   # to fail, enabling locking or at least warning the user not to do parallel
   # builds.
   chmod -w .


   if (eval $ac_compile 2>out/conftest.err) && test -s out/conftest2.$ac_objext
   then


     # The compiler can only warn and ignore the option if not recognized
     # So say no if there are warnings
     if test -s out/conftest.err; then
       # Append any errors to the config.log.
       cat out/conftest.err 1>&AS_MESSAGE_LOG_FD

     else
       _LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes

     fi




   fi
   ifelse([$1],[],[CFLAGS="$save_CFLAGS"],
          [$1],[CXX],[CXXFLAGS="$save_CXXFLAGS"],
          [$1],[GCJ],[GCJFLAGS="$save_GCJFLAGS"])
   chmod u+w .
   $rm conftest* out/*
   rmdir out
   cd ..
   rmdir conftest
   $rm conftest*
])
])# AC_LIBTOOL_PROG_CC_C_O






























# AC_LIBTOOL_SYS_HARD_LINK_LOCKS([TAGNAME])
# -----------------------------------------
# Check to see if we can do hard links to lock some files if needed
AC_DEFUN([AC_LIBTOOL_SYS_HARD_LINK_LOCKS],
[AC_REQUIRE([_LT_AC_LOCK])dnl

hard_links="nottested"
if test "$_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)" = no && test "$need_locks" != no; then
  # do not overwrite the value of need_locks provided by the user
  AC_MSG_CHECKING([if we can lock with hard links])
  hard_links=yes
  $rm conftest*
  ln conftest.a conftest.b 2>/dev/null && hard_links=no
  touch conftest.a
  ln conftest.a conftest.b 2>&5 || hard_links=no
  ln conftest.a conftest.b 2>/dev/null && hard_links=no
  AC_MSG_RESULT([$hard_links])
  if test "$hard_links" = no; then
    AC_MSG_WARN([`$CC' does not support `-c -o', so `make -j' may be unsafe])
    need_locks=warn
  fi
else
  need_locks=no
fi
])# AC_LIBTOOL_SYS_HARD_LINK_LOCKS




















# AC_LIBTOOL_OBJDIR
# -----------------
AC_DEFUN([AC_LIBTOOL_OBJDIR],
[AC_CACHE_CHECK([for objdir], [lt_cv_objdir],
[rm -f .libs 2>/dev/null























































































































































































































































































































































































































































































































































































mkdir .libs 2>/dev/null




































































































if test -d .libs; then
  lt_cv_objdir=.libs





















else
  # MS-DOS does not allow filenames that begin with a dot.
  lt_cv_objdir=_libs

fi
rmdir .libs 2>/dev/null])
objdir=$lt_cv_objdir
])# AC_LIBTOOL_OBJDIR












# AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH([TAGNAME])
# ----------------------------------------------
# Check hardcoding attributes.
AC_DEFUN([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH],
[AC_MSG_CHECKING([how to hardcode library paths into programs])
_LT_AC_TAGVAR(hardcode_action, $1)=
if test -n "$_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)" || \
   test -n "$_LT_AC_TAGVAR(runpath_var $1)"; then


  # We can hardcode non-existant directories.
  if test "$_LT_AC_TAGVAR(hardcode_direct, $1)" != no &&

     # If the only mechanism to avoid hardcoding is shlibpath_var, we
     # have to relink, otherwise we might link with an installed library
     # when we should be linking with a yet-to-be-installed one
     ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)" != no &&
     test "$_LT_AC_TAGVAR(hardcode_minus_L, $1)" != no; then
    # Linking always hardcodes the temporary library directory.
    _LT_AC_TAGVAR(hardcode_action, $1)=relink
  else
    # We can link without hardcoding, and we can hardcode nonexisting dirs.
    _LT_AC_TAGVAR(hardcode_action, $1)=immediate
  fi
else
  # We cannot hardcode anything, or else we can only hardcode existing
  # directories.
  _LT_AC_TAGVAR(hardcode_action, $1)=unsupported
fi
AC_MSG_RESULT([$_LT_AC_TAGVAR(hardcode_action, $1)])

if test "$_LT_AC_TAGVAR(hardcode_action, $1)" = relink; then
  # Fast installation is not supported
  enable_fast_install=no
elif test "$shlibpath_overrides_runpath" = yes ||
     test "$enable_shared" = no; then
  # Fast installation is not necessary
  enable_fast_install=needless
fi
])# AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH


# AC_LIBTOOL_SYS_LIB_STRIP
# ------------------------
AC_DEFUN([AC_LIBTOOL_SYS_LIB_STRIP],
[striplib=
old_striplib=
AC_MSG_CHECKING([whether stripping libraries is possible])
if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then
  test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
  test -z "$striplib" && striplib="$STRIP --strip-unneeded"
  AC_MSG_RESULT([yes])
else
  AC_MSG_RESULT([no])
fi
])# AC_LIBTOOL_SYS_LIB_STRIP




# AC_LIBTOOL_SYS_DYNAMIC_LINKER
# -----------------------------
# PORTME Fill in your ld.so characteristics
AC_DEFUN([AC_LIBTOOL_SYS_DYNAMIC_LINKER],
[AC_MSG_CHECKING([dynamic linker characteristics])
library_names_spec=
libname_spec='lib$name'
soname_spec=
postinstall_cmds=
postuninstall_cmds=
finish_cmds=
finish_eval=
shlibpath_var=
shlibpath_overrides_runpath=unknown
version_type=none
dynamic_linker="$host_os ld.so"
sys_lib_dlsearch_path_spec="/lib /usr/lib"
sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
need_lib_prefix=unknown
hardcode_into_libs=no

# when you set need_version to no, make sure it does not cause -set_version
# flags to be left without arguments
need_version=unknown

case $host_os in
aix3*)
  version_type=linux
  library_names_spec='${libname}${release}.so$versuffix $libname.a'
  shlibpath_var=LIBPATH

  # AIX 3 has no versioning support, so we append a major version to the name.
  soname_spec='${libname}${release}.so$major'
  ;;

aix4* | aix5*)
  version_type=linux



  if test "$host_cpu" = ia64; then
    # AIX 5 supports IA64
    library_names_spec='${libname}${release}.so$major ${libname}${release}.so$versuffix $libname.so'
    shlibpath_var=LD_LIBRARY_PATH
  else
    # With GCC up to 2.95.x, collect2 would create an import file
    # for dependence libraries.  The import file would start with
    # the line `#! .'.  This would cause the generated library to
    # depend on `.', always an invalid library.  This was fixed in
    # development snapshots of GCC prior to 3.0.
    case $host_os in
      [ aix4 | aix4.[01] | aix4.[01].*)]
      if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
           echo ' yes '
           echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then
        :
      else
        can_build_shared=no
      fi
      ;;
    esac
    # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
    # soname into executable. Probably we can add versioning support to
    # collect2, so additional links can be useful in future.

    if test "$aix_use_runtimelinking" = yes; then
      # If using run time linking (on AIX 4.2 or later) use lib<name>.so
      # instead of lib<name>.a to let people know that these are not
      # typical AIX shared libraries.
      library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
    else
      # We preserve .a as extension for shared libraries through AIX4.2
      # and later when we are not doing run time linking.
      library_names_spec='${libname}${release}.a $libname.a'
      soname_spec='${libname}${release}.so$major'
    fi
    shlibpath_var=LIBPATH
    deplibs_check_method=pass_all
  fi

  ;;

amigaos*)
  library_names_spec='$libname.ixlibrary $libname.a'
  # Create ${libname}_ixlibrary.a entries in /sys/libs.
  finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | [$Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\'']`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "(cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a)"; (cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a) || exit 1; done'
  ;;

beos*)
  library_names_spec='${libname}.so'
  dynamic_linker="$host_os ld.so"
  shlibpath_var=LIBRARY_PATH
  ;;
................................................................................
  need_version=no
  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
  soname_spec='${libname}${release}.so$major'
  finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
  shlibpath_var=LD_LIBRARY_PATH
  sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
  sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"

  # the default ld.so.conf also contains /usr/contrib/lib and
  # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
  # libtool to hard-code these into programs
  ;;

cygwin* | mingw* | pw32*)
  version_type=windows
  need_version=no
  need_lib_prefix=no
  case $GCC,$host_os in
  yes,cygwin*)
    library_names_spec='$libname.dll.a'
    sys_lib_search_path_spec="/lib /lib/w32api /usr/lib /usr/local/lib"
    soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | [sed -e 's/[.]/-/g']`${versuffix}.dll'
    postinstall_cmds='dlpath=`bash 2>&1 -c '\''. $dir/${file}i;echo \$dlname'\''`~
      dldir=$destdir/`dirname \$dlpath`~
      test -d \$dldir || mkdir -p \$dldir~
      $install_prog .libs/$dlname \$dldir/$dlname'
    postuninstall_cmds='dldll=`bash 2>&1 -c '\''. $file; echo \$dlname'\''`~
      dlpath=$dir/\$dldll~
       $rm \$dlpath'
    ;;
  yes,mingw*)
    library_names_spec='${libname}`echo ${release} | [sed -e 's/[.]/-/g']`${versuffix}.dll'
    sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | sed -e "s/^libraries://" -e "s/$PATH_SEPARATOR/ /g"`
    ;;
  yes,pw32*)
    library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | sed -e 's/[.]/-/g'`${versuffix}.dll'
    ;;
  *)
    library_names_spec='${libname}`echo ${release} | [sed -e 's/[.]/-/g']`${versuffix}.dll $libname.lib'
    ;;
  esac
  dynamic_linker='Win32 ld.exe'
  # FIXME: first we should search . and the directory the executable is in
  shlibpath_var=PATH
  ;;

................................................................................
  #        yet detect zsh echo's removal of \ escapes.
  library_names_spec='${libname}${release}${versuffix}.$(test .$module = .yes && echo so || echo dylib) ${libname}${release}${major}.$(test .$module = .yes && echo so || echo dylib) ${libname}.$(test .$module = .yes && echo so || echo dylib)'
  soname_spec='${libname}${release}${major}.$(test .$module = .yes && echo so || echo dylib)'
  shlibpath_overrides_runpath=yes
  shlibpath_var=DYLD_LIBRARY_PATH
  ;;

dgux*)




  version_type=linux
  need_lib_prefix=no
  need_version=no
  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
  soname_spec='${libname}${release}.so$major'
  shlibpath_var=LD_LIBRARY_PATH
  ;;

freebsd1*)
  dynamic_linker=no
  ;;

freebsd*)
  objformat=`test -x /usr/bin/objformat && /usr/bin/objformat || echo aout`
  version_type=freebsd-$objformat
  case $version_type in
    freebsd-elf*)
................................................................................
      ;;
  esac
  shlibpath_var=LD_LIBRARY_PATH
  case $host_os in
  freebsd2*)
    shlibpath_overrides_runpath=yes
    ;;
  freebsd3.[01]* | freebsdelf3.[01]*)
    shlibpath_overrides_runpath=yes
    hardcode_into_libs=yes
    ;;
  *) # from 3.2 on
    shlibpath_overrides_runpath=no
    hardcode_into_libs=yes
    ;;
  esac
  ;;

gnu*)
................................................................................
  shlibpath_var=LD_LIBRARY_PATH
  hardcode_into_libs=yes
  ;;

hpux9* | hpux10* | hpux11*)
  # Give a soname corresponding to the major version so that dld.sl refuses to
  # link against other versions.

  version_type=sunos
  need_lib_prefix=no
  need_version=no
  if test "$host_cpu" = ia64; then
    hardcode_into_libs=yes
    dynamic_linker="$host_os dld.so"
    shlibpath_var=LD_LIBRARY_PATH
    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
    library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
    soname_spec='${libname}${release}.so$major'
    if test "X$HPUX_IA64_MODE" = X32; then
      sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
    else
      sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
    fi
    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
  else
    dynamic_linker="$host_os dld.sl"
    shlibpath_var=SHLIB_PATH
    shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
    library_names_spec='${libname}${release}.sl$versuffix ${libname}${release}.sl$major $libname.sl'
    soname_spec='${libname}${release}.sl$major'
  fi
  # HP-UX runs *really* slowly unless shared libraries are mode 555.
  postinstall_cmds='chmod 555 $lib'
  ;;

irix5* | irix6*)


  version_type=irix

  need_lib_prefix=no
  need_version=no
  soname_spec='${libname}${release}.so$major'
  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major ${libname}${release}.so $libname.so'
  case $host_os in
  irix5*)
    libsuff= shlibsuff=
    ;;
  *)
    case $LD in # libtool.m4 will add one of these switches to LD
    *-32|*"-32 ") libsuff= shlibsuff= libmagic=32-bit;;
    *-n32|*"-n32 ") libsuff=32 shlibsuff=N32 libmagic=N32;;
    *-64|*"-64 ") libsuff=64 shlibsuff=64 libmagic=64-bit;;
................................................................................
  shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
  shlibpath_overrides_runpath=no
  sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
  sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
  ;;

# No shared lib support for Linux oldld, aout, or coff.
linux*oldld* | linux*aout* | linux*coff*)
  dynamic_linker=no
  ;;

# This must be Linux ELF.
linux*)
  version_type=linux
  need_lib_prefix=no
  need_version=no
  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
  soname_spec='${libname}${release}.so$major'
  finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
  shlibpath_var=LD_LIBRARY_PATH
................................................................................
newsos6)
  version_type=linux
  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
  shlibpath_var=LD_LIBRARY_PATH
  shlibpath_overrides_runpath=yes
  ;;

nto-qnx)
  version_type=linux
  need_lib_prefix=no
  need_version=no
  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
  soname_spec='${libname}${release}.so$major'
  shlibpath_var=LD_LIBRARY_PATH
  shlibpath_overrides_runpath=yes
  ;;

openbsd*)
  version_type=sunos
  library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix'
  finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
  shlibpath_var=LD_LIBRARY_PATH
  file_magic_cmd=/usr/bin/file
  file_magic_test_file=`echo /usr/lib/libc.so.*`
  if [ "`echo __ELF__ | $CC -E - | grep __ELF__`" = "" -o "$host_os-$host_cpu" = "openbsd2.8-powerpc" ]; then
    deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB shared object'
  else
    deplibs_check_method='file_magic OpenBSD.* shared library'
  fi
  ;;

os2*)
  libname_spec='$name'
  need_lib_prefix=no
  library_names_spec='$libname.dll $libname.a'
  dynamic_linker='OS/2 ld.exe'
  shlibpath_var=LIBPATH
  ;;

osf3* | osf4* | osf5*)
  version_type=osf
  need_version=no

  soname_spec='${libname}${release}.so'
  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so $libname.so'
  shlibpath_var=LD_LIBRARY_PATH
  sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
  sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"

  ;;

sco3.2v5*)
  version_type=osf
  soname_spec='${libname}${release}.so$major'
  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
  shlibpath_var=LD_LIBRARY_PATH
................................................................................
  version_type=linux
  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
  soname_spec='${libname}${release}.so$major'
  shlibpath_var=LD_LIBRARY_PATH
  case $host_vendor in
    sni)
      shlibpath_overrides_runpath=no






      ;;
    motorola)
      need_lib_prefix=no
      need_version=no
      shlibpath_overrides_runpath=no
      sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
      ;;
  esac
  ;;

















sysv4*MP*)
  if test -d /usr/nec ;then
    version_type=linux
    library_names_spec='$libname.so.$versuffix $libname.so.$major $libname.so'
    soname_spec='$libname.so.$major'
    shlibpath_var=LD_LIBRARY_PATH
  fi
  ;;

uts4*)
  version_type=linux
  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
  soname_spec='${libname}${release}.so$major'
  shlibpath_var=LD_LIBRARY_PATH
  ;;

*)
  dynamic_linker=no
  ;;
esac
AC_MSG_RESULT([$dynamic_linker])
test "$dynamic_linker" = no && can_build_shared=no
])# AC_LIBTOOL_SYS_DYNAMIC_LINKER


# _LT_AC_TAGCONFIG
# ----------------
AC_DEFUN([_LT_AC_TAGCONFIG],
[AC_REQUIRE([_LT_AC_LIBTOOL_SYS_PATH_SEPARATOR])dnl
AC_ARG_WITH([tags], 
    [AC_HELP_STRING([--with-tags=TAGS],
        [include additional configurations @<:@CXX,GCJ@:>@])],
    [tagnames="$withval"],
    [tagnames="CXX,GCJ"])

if test -f "$ltmain" && test -n "$tagnames"; then
  if test ! -f "${ofile}"; then
    AC_MSG_WARN([output file `$ofile' does not exist])
  fi

  if test -z "$LTCC"; then
    eval "`$SHELL ${ofile} --config | grep '^LTCC='`"
    if test -z "$LTCC"; then
      AC_MSG_WARN([output file `$ofile' does not look like a libtool script])
    else
      AC_MSG_WARN([using `LTCC=$LTCC', extracted from `$ofile'])
    fi
  fi

  # Extract list of available tagged configurations in $ofile.
  # Note that this assumes the entire list is on one line.
  available_tags=`grep "^available_tags=" "${ofile}" | sed -e 's/available_tags=\(.*$\)/\1/' -e 's/\"//g'`

  IFS="${IFS= 	}"; lt_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:},"
  for tagname in $tagnames; do
    IFS="$lt_save_ifs"
    # Check whether tagname contains only valid characters
    [case `$echo "X$tagname" | $Xsed -e 's/[-_ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz1234567890,/]//g'` in]
    "") ;;
    *)  AC_MSG_ERROR([invalid tag name: $tagname])
        ;;
    esac

    if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "${ofile}" > /dev/null
    then
      AC_MSG_ERROR([tag name $tagname already exists])
    fi

    # Update the list of available tags.
    if test -n "$tagname"; then
      echo appending configuration tag \"$tagname\" to $ofile

      case $tagname in
      CXX) 
        AC_LIBTOOL_LANG_CXX_CONFIG
        ;;

      GCJ)
        AC_LIBTOOL_LANG_GCJ_CONFIG
        ;;

      *)
        AC_MSG_ERROR([Unsupported tag name: $tagname])
        ;;
      esac

      # Append the new tag name to the list of available tags.
      available_tags="$available_tags $tagname"
    fi
  done
  IFS="$lt_save_ifs"

  # Now substitute the updated list of available tags.
  if eval "sed -e 's/^available_tags=.*\$/available_tags=\"$available_tags\"/' \"$ofile\" > \"${ofile}T\""; then
    mv "${ofile}T" "$ofile"
    chmod +x "$ofile"
  else
    rm -f "${ofile}T"
    AC_MSG_ERROR([unable to update list of available tagged configurations.])
  fi
fi
])# _LT_AC_TAGCONFIG


# AC_LIBTOOL_DLOPEN
# -----------------
# enable checks for dlopen support
AC_DEFUN([AC_LIBTOOL_DLOPEN],
 [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])
])# AC_LIBTOOL_DLOPEN


# AC_LIBTOOL_WIN32_DLL
# --------------------
# declare package support for building win32 dll's
AC_DEFUN([AC_LIBTOOL_WIN32_DLL],
[AC_BEFORE([$0], [AC_LIBTOOL_SETUP])
])# AC_LIBTOOL_WIN32_DLL


# AC_ENABLE_SHARED([DEFAULT])
# ---------------------------
# implement the --enable-shared flag
# DEFAULT is either `yes' or `no'.  If omitted, it defaults to `yes'.
AC_DEFUN([AC_ENABLE_SHARED],
[AC_REQUIRE([_LT_AC_LIBTOOL_SYS_PATH_SEPARATOR])dnl
define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl
AC_ARG_ENABLE([shared],
    [AC_HELP_STRING([--enable-shared@<:@=PKGS@:>@],
        [build shared libraries @<:@default=]AC_ENABLE_SHARED_DEFAULT[@:>@])],
    [p=${PACKAGE-default}
    case $enableval in
    yes) enable_shared=yes ;;
    no) enable_shared=no ;;
    *)
      enable_shared=no
      # Look at the argument we got.  We use all the common list separators.
      IFS="${IFS= 	}"; lt_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:},"
      for pkg in $enableval; do
        IFS="$lt_save_ifs"
        if test "X$pkg" = "X$p"; then
          enable_shared=yes
        fi
      done
      IFS="$lt_save_ifs"
      ;;
    esac],
    [enable_shared=]AC_ENABLE_SHARED_DEFAULT)
])# AC_ENABLE_SHARED


# AC_DISABLE_SHARED
# -----------------
#- set the default shared flag to --disable-shared
AC_DEFUN([AC_DISABLE_SHARED],
[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
AC_ENABLE_SHARED(no)
])# AC_DISABLE_SHARED


# AC_ENABLE_STATIC([DEFAULT])
# ---------------------------
# implement the --enable-static flag
# DEFAULT is either `yes' or `no'.  If omitted, it defaults to `yes'.
AC_DEFUN([AC_ENABLE_STATIC],
[AC_REQUIRE([_LT_AC_LIBTOOL_SYS_PATH_SEPARATOR])dnl
define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl
AC_ARG_ENABLE([static],
    [AC_HELP_STRING([--enable-static@<:@=PKGS@:>@],
        [build static libraries @<:@default=]AC_ENABLE_STATIC_DEFAULT[@:>@])],
    [p=${PACKAGE-default}
    case $enableval in
    yes) enable_static=yes ;;
    no) enable_static=no ;;
    *)
     enable_static=no
      # Look at the argument we got.  We use all the common list separators.
      IFS="${IFS= 	}"; lt_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:},"
      for pkg in $enableval; do
        IFS="$lt_save_ifs"
        if test "X$pkg" = "X$p"; then
          enable_static=yes
        fi
      done
      IFS="$lt_save_ifs"
      ;;
    esac],
    [enable_static=]AC_ENABLE_STATIC_DEFAULT)
])# AC_ENABLE_STATIC


# AC_DISABLE_STATIC
# -----------------
# set the default static flag to --disable-static
AC_DEFUN([AC_DISABLE_STATIC],
[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
AC_ENABLE_STATIC(no)
])# AC_DISABLE_STATIC


# AC_ENABLE_FAST_INSTALL([DEFAULT])
# ---------------------------------
# implement the --enable-fast-install flag
# DEFAULT is either `yes' or `no'.  If omitted, it defaults to `yes'.
AC_DEFUN([AC_ENABLE_FAST_INSTALL],
[AC_REQUIRE([_LT_AC_LIBTOOL_SYS_PATH_SEPARATOR])dnl
define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl
AC_ARG_ENABLE([fast-install],
    [AC_HELP_STRING([--enable-fast-install@<:@=PKGS@:>@],
    [optimize for fast installation @<:@default=]AC_ENABLE_FAST_INSTALL_DEFAULT[@:>@])],
    [p=${PACKAGE-default}
    case $enableval in
    yes) enable_fast_install=yes ;;
    no) enable_fast_install=no ;;
    *)
      enable_fast_install=no
      # Look at the argument we got.  We use all the common list separators.
      IFS="${IFS= 	}"; lt_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:},"
      for pkg in $enableval; do
        IFS="$lt_save_ifs"
        if test "X$pkg" = "X$p"; then
          enable_fast_install=yes
        fi
      done
      IFS="$lt_save_ifs"
      ;;
    esac],
    [enable_fast_install=]AC_ENABLE_FAST_INSTALL_DEFAULT)
])# AC_ENABLE_FAST_INSTALL


# AC_DISABLE_FAST_INSTALL
# -----------------------
# set the default to --disable-fast-install
AC_DEFUN([AC_DISABLE_FAST_INSTALL],
[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
AC_ENABLE_FAST_INSTALL(no)
])# AC_DISABLE_FAST_INSTALL


# AC_LIBTOOL_PICMODE([MODE])
# --------------------------
# implement the --with-pic flag
# MODE is either `yes' or `no'.  If omitted, it defaults to `both'.
AC_DEFUN([AC_LIBTOOL_PICMODE],
[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
pic_mode=ifelse($#,1,$1,default)
])# AC_LIBTOOL_PICMODE


# AC_PATH_TOOL_PREFIX
# -------------------
# find a file program which can recognise shared library
AC_DEFUN([AC_PATH_TOOL_PREFIX],
[AC_REQUIRE([_LT_AC_LIBTOOL_SYS_PATH_SEPARATOR])dnl
AC_MSG_CHECKING([for $1])
AC_CACHE_VAL(lt_cv_path_MAGIC_CMD,
[case $MAGIC_CMD in
[\\/*] |  ?:[\\/]*)
  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
  ;;
*)
  lt_save_MAGIC_CMD="$MAGIC_CMD"
  IFS="${IFS=   }"; lt_save_ifs="$IFS"; IFS="${PATH_SEPARATOR-:}"
dnl $ac_dummy forces splitting on constant user-supplied paths.
dnl POSIX.2 word splitting is done only on the output of word expansions,
dnl not every word.  This closes a longstanding sh security hole.
  ac_dummy="ifelse([$2], , $PATH, [$2])"
  for ac_dir in $ac_dummy; do
    IFS="$lt_save_ifs"
    test -z "$ac_dir" && ac_dir=.
    if test -f $ac_dir/$1; then
      lt_cv_path_MAGIC_CMD="$ac_dir/$1"
      if test -n "$file_magic_test_file"; then
	case $deplibs_check_method in
	"file_magic "*)
	  file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`"
	  MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
	    egrep "$file_magic_regex" > /dev/null; then
	    :
	  else
	    cat <<EOF 1>&2

*** Warning: the command libtool uses to detect shared libraries,
*** $file_magic_cmd, produces output that libtool cannot recognize.
*** The result is that libtool may fail to recognize shared libraries
*** as such.  This will affect the creation of libtool libraries that
*** depend on shared libraries, but programs linked with such libtool
*** libraries will work regardless of this problem.  Nevertheless, you
*** may want to report the problem to your system manager and/or to
*** bug-libtool@gnu.org

EOF
	  fi ;;
	esac
      fi
      break
    fi
  done
  IFS="$lt_save_ifs"
  MAGIC_CMD="$lt_save_MAGIC_CMD"
  ;;
esac])
MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
if test -n "$MAGIC_CMD"; then
  AC_MSG_RESULT($MAGIC_CMD)
else
  AC_MSG_RESULT(no)
fi
])# AC_PATH_TOOL_PREFIX


# AC_PATH_MAGIC
# -------------
# find a file program which can recognise a shared library
AC_DEFUN([AC_PATH_MAGIC],
[AC_REQUIRE([_LT_AC_LIBTOOL_SYS_PATH_SEPARATOR])dnl
AC_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin${PATH_SEPARATOR-:}$PATH)
if test -z "$lt_cv_path_MAGIC_CMD"; then
  if test -n "$ac_tool_prefix"; then
    AC_PATH_TOOL_PREFIX(file, /usr/bin${PATH_SEPARATOR-:}$PATH)
  else
    MAGIC_CMD=:
  fi
fi
])# AC_PATH_MAGIC


# AC_PROG_LD
# ----------
# find the path to the GNU or non-GNU linker
AC_DEFUN([AC_PROG_LD],
[AC_ARG_WITH([gnu-ld],
    [AC_HELP_STRING([--with-gnu-ld],
        [assume the C compiler uses GNU ld @<:@default=no@:>@])],
    [test "$withval" = no || with_gnu_ld=yes],
    [with_gnu_ld=no])
AC_REQUIRE([AC_PROG_CC])dnl
AC_REQUIRE([AC_CANONICAL_HOST])dnl
AC_REQUIRE([AC_CANONICAL_BUILD])dnl
AC_REQUIRE([_LT_AC_LIBTOOL_SYS_PATH_SEPARATOR])dnl
ac_prog=ld
if test "$GCC" = yes; then
  # Check if gcc -print-prog-name=ld gives a path.
  AC_MSG_CHECKING([for ld used by GCC])
  case $host in
  *-*-mingw*)
    # gcc leaves a trailing carriage return which upsets mingw
    ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
  *)
    ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
  esac
  case $ac_prog in
    # Accept absolute paths.
    [[\\/]]* | ?:[[\\/]]*)
      [re_direlt='/[^/][^/]*/\.\./']
      # Canonicalize the path of ld
      ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
      while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
	ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
      done
      test -z "$LD" && LD="$ac_prog"
      ;;
  "")
    # If it fails, then pretend we aren't using GCC.
    ac_prog=ld
    ;;
  *)
    # If it is relative, then search for the first ld in PATH.
    with_gnu_ld=unknown
    ;;
  esac
elif test "$with_gnu_ld" = yes; then
  AC_MSG_CHECKING([for GNU ld])
else
  AC_MSG_CHECKING([for non-GNU ld])
fi
AC_CACHE_VAL(lt_cv_path_LD,
[if test -z "$LD"; then
  IFS="${IFS= 	}"; lt_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
  for ac_dir in $PATH; do
    IFS="$lt_save_ifs"
    test -z "$ac_dir" && ac_dir=.
    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
      lt_cv_path_LD="$ac_dir/$ac_prog"
      # Check to see if the program is GNU ld.  I'd rather use --version,
      # but apparently some GNU ld's only accept -v.
      # Break only if it was the GNU/non-GNU ld that we prefer.
      if "$lt_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
	test "$with_gnu_ld" != no && break
      else
	test "$with_gnu_ld" != yes && break
      fi
    fi
  done
  IFS="$lt_save_ifs"
else
  lt_cv_path_LD="$LD" # Let the user override the test with a path.
fi])
LD="$lt_cv_path_LD"
if test -n "$LD"; then
  AC_MSG_RESULT($LD)
else
  AC_MSG_RESULT(no)
fi
test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
AC_PROG_LD_GNU
])# AC_PROG_LD


# AC_PROG_LD_GNU
# --------------
AC_DEFUN([AC_PROG_LD_GNU],
[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld,
[# I'd rather use --version here, but apparently some GNU ld's only accept -v.
if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
  lt_cv_prog_gnu_ld=yes
else
  lt_cv_prog_gnu_ld=no
fi])
with_gnu_ld=$lt_cv_prog_gnu_ld
])# AC_PROG_LD_GNU


# AC_PROG_LD_RELOAD_FLAG
# ----------------------
# find reload flag for linker
#   -- PORTME Some linkers may need a different reload flag.
AC_DEFUN([AC_PROG_LD_RELOAD_FLAG],
[AC_CACHE_CHECK([for $LD option to reload object files],
  lt_cv_ld_reload_flag,
  [lt_cv_ld_reload_flag='-r'])
reload_flag=$lt_cv_ld_reload_flag
case $reload_flag in
"" | " "*) ;;
*) reload_flag=" $reload_flag" ;;
esac
reload_cmds='$LD$reload_flag -o $output$reload_objs'
])# AC_PROG_LD_RELOAD_FLAG


# AC_DEPLIBS_CHECK_METHOD
# -----------------------
# how to check for library dependencies
#  -- PORTME fill in with the dynamic library characteristics
AC_DEFUN([AC_DEPLIBS_CHECK_METHOD],
[AC_CACHE_CHECK([how to recognise dependant libraries],
lt_cv_deplibs_check_method,
[lt_cv_file_magic_cmd='$MAGIC_CMD'
lt_cv_file_magic_test_file=
lt_cv_deplibs_check_method='unknown'
# Need to set the preceding variable on all platforms that support
# interlibrary dependencies.
# 'none' -- dependencies not supported.
# `unknown' -- same as none, but documents that we really don't know.
# 'pass_all' -- all dependencies passed with no checks.
# 'test_compile' -- check by making test program.
# ['file_magic [regex]'] -- check by looking for files in library path
# which responds to the $file_magic_cmd with a given egrep regex.
# If you have `file' or equivalent on your system and you're not sure
# whether `pass_all' will *always* work, you probably want this one.

case $host_os in
aix4* | aix5*)
  lt_cv_deplibs_check_method=pass_all
  ;;

beos*)
  lt_cv_deplibs_check_method=pass_all
  ;;

bsdi4*)
  [lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)']
  lt_cv_file_magic_cmd='/usr/bin/file -L'
  lt_cv_file_magic_test_file=/shlib/libc.so
  ;;

cygwin* | mingw* | pw32*)
  lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
  lt_cv_file_magic_cmd='$OBJDUMP -f'
  ;;

darwin* | rhapsody*)
  lt_cv_deplibs_check_method='file_magic Mach-O dynamically linked shared library'
  lt_cv_file_magic_cmd='/usr/bin/file -L'
  case "$host_os" in
  rhapsody* | darwin1.[012])
    lt_cv_file_magic_test_file=`/System/Library/Frameworks/System.framework/System`
    ;;
  *) # Darwin 1.3 on
    lt_cv_file_magic_test_file='/usr/lib/libSystem.dylib'
    ;;
  esac
  ;;

freebsd*)
  if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
    case $host_cpu in
    i*86 )
      # Not sure whether the presence of OpenBSD here was a mistake.
      # Let's accept both of them until this is cleared up.
      [lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD)/i[3-9]86 (compact )?demand paged shared library']
      lt_cv_file_magic_cmd=/usr/bin/file
      lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
      ;;
    esac
  else
    lt_cv_deplibs_check_method=pass_all
  fi
  ;;

gnu*)
  lt_cv_deplibs_check_method=pass_all
  ;;

hpux10.20* | hpux11*)
  lt_cv_file_magic_cmd=/usr/bin/file
  if test "$host_cpu" = ia64; then
    [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64']
    lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
  else
    [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library']
    lt_cv_file_magic_test_file=/usr/lib/libc.sl
  fi
  ;;

irix5* | irix6*)
  case $host_os in
  irix5*)
    # this will be overridden with pass_all, but let us keep it just in case
    lt_cv_deplibs_check_method="file_magic ELF 32-bit MSB dynamic lib MIPS - version 1"
    ;;
  *)
    case $LD in
    *-32|*"-32 ") libmagic=32-bit;;
    *-n32|*"-n32 ") libmagic=N32;;
    *-64|*"-64 ") libmagic=64-bit;;
    *) libmagic=never-match;;
    esac
    # this will be overridden with pass_all, but let us keep it just in case
    [lt_cv_deplibs_check_method="file_magic ELF ${libmagic} MSB mips-[1234] dynamic lib MIPS - version 1"]
    ;;
  esac
  lt_cv_file_magic_test_file=`echo /lib${libsuff}/libc.so*`
  lt_cv_deplibs_check_method=pass_all
  ;;

# This must be Linux ELF.
linux*)
  case $host_cpu in
  alpha* | hppa* | i*86 | ia64* | m68* | mips | mipsel | powerpc* | sparc* | s390* | sh*)
    lt_cv_deplibs_check_method=pass_all ;;
  *)
    # glibc up to 2.1.1 does not perform some relocations on ARM
    [lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )' ;;]
  esac
  lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so`
  ;;

netbsd*)
  if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
    [lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so\.[0-9]+\.[0-9]+$']
  else
    [lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so$']
  fi
  ;;

newos6*)
  [lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)']
  lt_cv_file_magic_cmd=/usr/bin/file
  lt_cv_file_magic_test_file=/usr/lib/libnls.so
  ;;

nto-qnx)
  lt_cv_deplibs_check_method=unknown
  ;;
     
osf3* | osf4* | osf5*)
  # this will be overridden with pass_all, but let us keep it just in case
  lt_cv_deplibs_check_method='file_magic COFF format alpha shared library'
  lt_cv_file_magic_test_file=/shlib/libc.so
  lt_cv_deplibs_check_method=pass_all
  ;;

sco3.2v5*)
  lt_cv_deplibs_check_method=pass_all
  ;;

solaris*)
  lt_cv_deplibs_check_method=pass_all
  lt_cv_file_magic_test_file=/lib/libc.so
  ;;

sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
  case $host_vendor in
  motorola)
    [lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]']
    lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
    ;;
  ncr)
    lt_cv_deplibs_check_method=pass_all
    ;;
  sequent)
    lt_cv_file_magic_cmd='/bin/file'
    [lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )']
    ;;
  sni)
    lt_cv_file_magic_cmd='/bin/file'
    [lt_cv_deplibs_check_method="file_magic ELF [0-9][0-9]*-bit [LM]SB dynamic lib"]
    lt_cv_file_magic_test_file=/lib/libc.so
    ;;
  esac
  ;;

sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[[78]]* | unixware7* | sysv4*uw2*)
  lt_cv_deplibs_check_method=pass_all
  ;;
esac
])
file_magic_cmd=$lt_cv_file_magic_cmd
deplibs_check_method=$lt_cv_deplibs_check_method
test -z "$deplibs_check_method" && deplibs_check_method=unknown
])# AC_DEPLIBS_CHECK_METHOD


# AC_PROG_NM
# ----------
# find the path to a BSD-compatible name lister
AC_DEFUN([AC_PROG_NM],
[AC_CACHE_CHECK([for BSD-compatible nm], lt_cv_path_NM,
[AC_REQUIRE([_LT_AC_LIBTOOL_SYS_PATH_SEPARATOR])dnl
if test -n "$NM"; then
  # Let the user override the test.
  lt_cv_path_NM="$NM"
else
  IFS="${IFS= 	}"; lt_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
  for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
    IFS="$lt_save_ifs"
    test -z "$ac_dir" && ac_dir=.
    tmp_nm=$ac_dir/${ac_tool_prefix}nm
    if test -f $tmp_nm || test -f $tmp_nm$ac_exeext ; then
      # Check to see if the nm accepts a BSD-compat flag.
      # Adding the `sed 1q' prevents false positives on HP-UX, which says:
      #   nm: unknown option "B" ignored
      # Tru64's nm complains that /dev/null is an invalid object file
      if ($tmp_nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep '(/dev/null|Invalid file or object type)' >/dev/null; then
	lt_cv_path_NM="$tmp_nm -B"
	break
      elif ($tmp_nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
	lt_cv_path_NM="$tmp_nm -p"
	break
      else
	lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
	continue # so that we can try to find one that supports BSD flags
      fi
    fi
  done
  IFS="$lt_save_ifs"
  test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm
fi])
NM="$lt_cv_path_NM"
])# AC_PROG_NM


# AC_CHECK_LIBM
# -------------
# check for math library
AC_DEFUN([AC_CHECK_LIBM],
[AC_REQUIRE([AC_CANONICAL_HOST])dnl
LIBM=
case $host in
*-*-beos* | *-*-cygwin* | *-*-pw32*)
  # These system don't have libm
  ;;
*-ncr-sysv4.3*)
  AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw")
  AC_CHECK_LIB(m, main, LIBM="$LIBM -lm")
  ;;
*)
  AC_CHECK_LIB(m, main, LIBM="-lm")
  ;;
esac
])# AC_CHECK_LIBM


# AC_LIBLTDL_CONVENIENCE([DIRECTORY])
# -----------------------------------
# sets LIBLTDL to the link flags for the libltdl convenience library and 
# INCLTDL to the include flags for the libltdl header and adds
# --enable-ltdl-convenience to the configure arguments.  Note that LIBLTDL
# and INCLTDL are not AC_SUBSTed, nor is AC_CONFIG_SUBDIRS called.  If
# DIRECTORY is not provided, it is assumed to be `libltdl'.  LIBLTDL will
# be prefixed with '${top_builddir}/' and INCLTDL will be prefixed with
# '${top_srcdir}/' (note the single quotes!).  If your package is not
# flat and you're not using automake, define top_builddir and
# top_srcdir appropriately in the Makefiles.
AC_DEFUN([AC_LIBLTDL_CONVENIENCE],
[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
  case $enable_ltdl_convenience in
  no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;;
  "") enable_ltdl_convenience=yes
      ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;;
  esac
  LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdlc.la
  INCLTDL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
])# AC_LIBLTDL_CONVENIENCE


# AC_LIBLTDL_INSTALLABLE([DIRECTORY])
# -----------------------------------
# sets LIBLTDL to the link flags for the libltdl installable library and
# INCLTDL to the include flags for the libltdl header and adds
# --enable-ltdl-install to the configure arguments.  Note that LIBLTDL
# and INCLTDL are not AC_SUBSTed, nor is AC_CONFIG_SUBDIRS called.  If
# DIRECTORY is not provided and an installed libltdl is not found, it is
# assumed to be `libltdl'.  LIBLTDL will be prefixed with '${top_builddir}/'
# and INCLTDL will be prefixed with '${top_srcdir}/' (note the single
# quotes!).  If your package is not flat and you're not using automake,
# define top_builddir and top_srcdir appropriately in the Makefiles.
# In the future, this macro may have to be called after AC_PROG_LIBTOOL.
AC_DEFUN([AC_LIBLTDL_INSTALLABLE],
[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
  AC_CHECK_LIB(ltdl, main,
  [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no],
  [if test x"$enable_ltdl_install" = xno; then
     AC_MSG_WARN([libltdl not installed, but installation disabled])
   else
     enable_ltdl_install=yes
   fi
  ])
  if test x"$enable_ltdl_install" = x"yes"; then
    ac_configure_args="$ac_configure_args --enable-ltdl-install"
    LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdl.la
    INCLTDL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
  else
    ac_configure_args="$ac_configure_args --enable-ltdl-install=no"
    LIBLTDL="-lltdl"
    INCLTDL=
  fi
])# AC_LIBLTDL_INSTALLABLE


# If this macro is not defined by Autoconf, define it here.
ifdef([AC_PROVIDE_IFELSE],
      [],
      [define([AC_PROVIDE_IFELSE],
              [ifdef([AC_PROVIDE_$1],
                     [$2], [$3])])])


# AC_LIBTOOL_CXX
# --------------
# enable support for C++ libraries
AC_DEFUN([AC_LIBTOOL_CXX],
[AC_REQUIRE([_LT_AC_LANG_CXX])
])# AC_LIBTOOL_CXX


# _LT_AC_LANG_CXX
# ---------------
AC_DEFUN([_LT_AC_LANG_CXX],
[AC_REQUIRE([AC_PROG_CXX])
AC_REQUIRE([AC_PROG_CXXCPP])
])# _LT_AC_LANG_CXX


# AC_LIBTOOL_GCJ
# --------------
# enable support for GCJ libraries
AC_DEFUN([AC_LIBTOOL_GCJ],
[AC_REQUIRE([_LT_AC_LANG_GCJ])
])# AC_LIBTOOL_GCJ


# _LT_AC_LANG_GCJ
# ---------------
AC_DEFUN([_LT_AC_LANG_GCJ],
[AC_PROVIDE_IFELSE([AC_PROG_GCJ],[],
  [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],[],
    [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],[],
      [ifdef([AC_PROG_GCJ],[AC_REQUIRE([AC_PROG_GCJ])],
         [ifdef([A][M_PROG_GCJ],[AC_REQUIRE([A][M_PROG_GCJ])],
           [AC_REQUIRE([A][C_PROG_GCJ_OR_A][M_PROG_GCJ])])])])])])
])# _LT_AC_LANG_GCJ


# AC_LIBTOOL_LANG_C_CONFIG
# ------------------------
# Ensure that the configuration vars for the C compiler are
# suitably defined.  Those variables are subsequently used by
# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
AC_DEFUN([AC_LIBTOOL_LANG_C_CONFIG], [_LT_AC_LANG_C_CONFIG])
AC_DEFUN([_LT_AC_LANG_C_CONFIG],
[lt_save_CC="$CC"
AC_LANG_PUSH(C)

# Source file extension for C test sources.
ac_ext=c

# Object file extension for compiled C test sources.
objext=o
_LT_AC_TAGVAR(objext, $1)=$objext

# Code to be used in simple compile tests
lt_simple_compile_test_code="int some_variable = 0;"

# Code to be used in simple link tests
lt_simple_link_test_code='main(){return(0);}'

_LT_AC_SYS_COMPILER

#
# Check for any special shared library compilation flags.
#
_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)=
if test "$GCC" = no; then
  case $host_os in
  sco3.2v5*)
    _LT_AC_TAGVAR(lt_prog_cc_shlib, $1)='-belf'
    ;;
  esac
fi
if test -n "$_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)"; then
  AC_MSG_WARN([`$CC' requires `$_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)' to build shared libraries])
  if echo "$old_CC $old_CFLAGS " | [egrep -e "[ 	]$]_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)[[ 	]"] >/dev/null; then :
  else
    AC_MSG_WARN([add `$_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)' to the CC or CFLAGS env variable and reconfigure])
    _LT_AC_TAGVAR(lt_cv_prog_cc_can_build_shared, $1)=no
  fi
fi


#
# Check to make sure the static flag actually works.
#
AC_LIBTOOL_LINKER_OPTION([if $compiler static flag $_LT_AC_TAGVAR(lt_prog_compiler_static, $1) works],
  _LT_AC_TAGVAR(lt_prog_compiler_static_works, $1),
  $_LT_AC_TAGVAR(lt_prog_compiler_static, $1),
  [],
  [_LT_AC_TAGVAR(lt_prog_compiler_static, $1)=])


AC_LIBTOOL_PROG_COMPILER_NO_RTTI($1)
AC_LIBTOOL_PROG_COMPILER_PIC($1)
AC_LIBTOOL_PROG_CC_C_O($1)
AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)
AC_LIBTOOL_PROG_LD_SHLIBS($1)
AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
AC_LIBTOOL_SYS_LIB_STRIP
AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
AC_LIBTOOL_DLOPEN_SELF($1)

# Report which librarie types wil actually be built

AC_MSG_CHECKING([if libtool supports shared libraries])
AC_MSG_RESULT([$can_build_shared])

AC_MSG_CHECKING([whether to build shared libraries])
test "$can_build_shared" = "no" && enable_shared=no

# On AIX, shared libraries and static libraries use the same namespace, and
................................................................................
  if test -n "$RANLIB"; then
    archive_cmds="$archive_cmds~\$RANLIB \$lib"
    postinstall_cmds='$RANLIB $lib'
  fi
  ;;

aix4*)
  test "$enable_shared" = yes && enable_static=no
  ;;
esac
AC_MSG_RESULT([$enable_shared])

AC_MSG_CHECKING([whether to build static libraries])
# Make sure either enable_shared or enable_static is yes.
test "$enable_shared" = yes || enable_static=yes
AC_MSG_RESULT([$enable_static])

AC_LIBTOOL_CONFIG($1)

AC_LANG_POP
CC="$lt_save_CC"
])# AC_LIBTOOL_LANG_C_CONFIG


# AC_LIBTOOL_LANG_CXX_CONFIG
# --------------------------
# Ensure that the configuration vars for the C compiler are
# suitably defined.  Those variables are subsequently used by
# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG], [_LT_AC_LANG_CXX_CONFIG(CXX)])
AC_DEFUN([_LT_AC_LANG_CXX_CONFIG],
[AC_LANG_PUSH(C++)
AC_REQUIRE([AC_PROG_CXX])
AC_REQUIRE([AC_PROG_CXXCPP])

_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
_LT_AC_TAGVAR(allow_undefined_flag, $1)=
_LT_AC_TAGVAR(always_export_symbols, $1)=no
_LT_AC_TAGVAR(archive_expsym_cmds, $1)=
_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=
_LT_AC_TAGVAR(hardcode_direct, $1)=no
_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
_LT_AC_TAGVAR(hardcode_minus_L, $1)=no
_LT_AC_TAGVAR(link_all_deplibs, $1)=unknown
_LT_AC_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
_LT_AC_TAGVAR(no_undefined_flag, $1)=
_LT_AC_TAGVAR(whole_archive_flag_spec, $1)=

# Dependencies to place before and after the object being linked:
_LT_AC_TAGVAR(predep_objects, $1)=
_LT_AC_TAGVAR(postdep_objects, $1)=
_LT_AC_TAGVAR(predeps, $1)=
_LT_AC_TAGVAR(postdeps, $1)=
_LT_AC_TAGVAR(compiler_lib_search_path, $1)=

# Source file extension for C test sources.
ac_ext=cc

# Object file extension for compiled C test sources.
objext=o
_LT_AC_TAGVAR(objext, $1)=$objext

# Code to be used in simple compile tests
lt_simple_compile_test_code="int some_variable = 0;"

# Code to be used in simple link tests
lt_simple_link_test_code='int main(int char *[]) { return(0); }'

# ltmain only uses $CC for tagged configurations so make sure $CC is set.
_LT_AC_SYS_COMPILER

# Allow CC to be a program name with arguments.
lt_save_CC="$CC"
CC=${CXX-"c++"}
set dummy $CC
compiler="[$]2"
_LT_AC_TAGVAR(compiler, $1)=$CC
cc_basename=`$echo X"$compiler" | $Xsed -e 's%^.*/%%'`

# We don't want -fno-exception wen compiling C++ code, so set the
# no_builtin_flag separately
if test "$GXX" = yes; then
  _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin'
else
  _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
fi

if test "$GXX" = yes; then
  # Set up default GNU C++ configuration

  # Check if GNU C++ uses GNU ld as the underlying linker, since the
  # archiving commands below assume that GNU ld is being used.
  if eval "`$CC -print-prog-name=ld` --version 2>&1" | \
      egrep 'GNU ld' > /dev/null; then
    with_gnu_ld=yes

    _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
    _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'

    _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
    _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'

    # If archive_cmds runs LD, not CC, wlarc should be empty
    # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to
    #     investigate it a little bit more. (MM)
    wlarc='${wl}'

    # ancient GNU ld didn't support --whole-archive et. al.
    if eval "`$CC -print-prog-name=ld` --help 2>&1" | \
        egrep 'no-whole-archive' > /dev/null; then
      _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
    else
      _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
    fi
  else
    with_gnu_ld=no
    wlarc=

    # A generic and very simple default shared library creation
    # command for GNU C++ for the case where it uses the native
    # linker, instead of GNU ld.  If possible, this setting should
    # overridden to take advantage of the native linker features on
    # the platform it is being used on.
    _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
  fi

  # Commands to make compiler produce verbose output that lists
  # what "hidden" libraries, object files and flags are used when
  # linking a shared library.
  output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | egrep "\-L"'

else
  GXX=no
  with_gnu_ld=no
  wlarc=
fi

# PORTME: fill in a description of your system's C++ link characteristics
AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
_LT_AC_TAGVAR(ld_shlibs, $1)=yes
case $host_os in
  aix3*)
    # FIXME: insert proper C++ library support
    _LT_AC_TAGVAR(ld_shlibs, $1)=no
    ;;
  aix4* | aix5*)
    if test "$host_cpu" = ia64; then
      # On IA64, the linker does run time linking by default, so we don't
      # have to do anything special.
      aix_use_runtimelinking=no
      exp_sym_flag='-Bexport'
      no_entry_flag=""
    else
      aix_use_runtimelinking=no

      # Test if we are trying to use run time linking or normal
      # AIX style linking. If -brtl is somewhere in LDFLAGS, we
      # need to do runtime linking.
      case $host_os in aix4.[[23]]|aix4.[[23]].*|aix5*)
        for ld_flag in $LDFLAGS; do
	  if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
	    aix_use_runtimelinking=yes
	    break
	  fi
        done
      esac

      exp_sym_flag='-bexport'
      no_entry_flag='-bnoentry'
    fi

    # When large executables or shared objects are built, AIX ld can
    # have problems creating the table of contents.  If linking a library
    # or program results in "error TOC overflow" add -mminimal-toc to
    # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
    # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.

    _LT_AC_TAGVAR(archive_cmds, $1)=''
    _LT_AC_TAGVAR(hardcode_direct, $1)=yes
    _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':'
    _LT_AC_TAGVAR(link_all_deplibs, $1)=yes

    if test "$GXX" = yes; then
      case $host_os in aix4.[012]|aix4.[012].*)
      # We only want to do this on AIX 4.2 and lower, the check
      # below for broken collect2 doesn't work under 4.3+
        collect2name=`${CC} -print-prog-name=collect2`
        if test -f "$collect2name" && \
	   strings "$collect2name" | grep resolve_lib_name >/dev/null
        then
	  # We have reworked collect2
	  _LT_AC_TAGVAR(hardcode_direct, $1)=yes
        else
	  # We have old collect2
	  _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported
	  # It fails to find uninstalled libraries when the uninstalled
	  # path is not listed in the libpath.  Setting hardcode_minus_L
	  # to unsupported forces relinking
	  _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
	  _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
	  _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
        fi
      esac
      shared_flag='-shared'
    else
      # not using gcc
      if test "$host_cpu" = ia64; then
	# VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
	# chokes on -Wl,-G. The following line is correct:
        shared_flag='-G'
      else
	if test "$aix_use_runtimelinking" = yes; then
          shared_flag='${wl}-G'
        else
          shared_flag='${wl}-bM:SRE'
	fi
      fi
    fi

    # It seems that -bexpall does not export symbols beginning with
    # underscore (_), so it is better to generate a list of symbols to export.
    _LT_AC_TAGVAR(always_export_symbols, $1)=yes
    if test "$aix_use_runtimelinking" = yes; then
      # Warning - without using the other runtime loading flags (-brtl),
      # -berok will link without error, but may produce a broken library.
      _LT_AC_TAGVAR(allow_undefined_flag, $1)='-berok'
      # Determine the default libpath from the value encoded in an empty executable.
      _LT_AC_SYS_LIBPATH_AIX
      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"

      _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols $shared_flag"
     else
      if test "$host_cpu" = ia64; then
        _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
        _LT_AC_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
        _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"
      else
        # Determine the default libpath from the value encoded in an empty executable.
        _LT_AC_SYS_LIBPATH_AIX
        _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
        # Warning - without using the other run time loading flags,
        # -berok will link without error, but may produce a broken library.
        _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
        _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
        # -bexpall does not export symbols beginning with underscore (_)
        _LT_AC_TAGVAR(always_export_symbols, $1)=yes
        # Exported symbols can be pulled into shared objects from archives
        _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=' '
        _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
        # This is similar to how AIX traditionally builds it's shared libraries.
        _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
      fi
    fi
    ;;
  chorus*)
    case $cc_basename in
      *)
        # FIXME: insert proper C++ library support
        _LT_AC_TAGVAR(ld_shlibs, $1)=no
        ;;
    esac
    ;;
  dgux*)
    case $cc_basename in
      ec++)
        # FIXME: insert proper C++ library support
        _LT_AC_TAGVAR(ld_shlibs, $1)=no
        ;;
      ghcx)
        # Green Hills C++ Compiler
        # FIXME: insert proper C++ library support
        _LT_AC_TAGVAR(ld_shlibs, $1)=no
        ;;
      *)
        # FIXME: insert proper C++ library support
        _LT_AC_TAGVAR(ld_shlibs, $1)=no
        ;;
    esac
    ;;
  freebsd[12]*)
    # C++ shared libraries reported to be fairly broken before switch to ELF
    _LT_AC_TAGVAR(ld_shlibs, $1)=no
    ;;
  freebsd-elf*)
    _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
    ;;
  freebsd*)
    # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF
    # conventions
    _LT_AC_TAGVAR(ld_shlibs, $1)=yes
    ;;
  gnu*)
    ;;
  hpux*)
    if test $with_gnu_ld = no; then
      if test "$host_cpu" = ia64; then
        _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
      else
        _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
        _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
        _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
      fi
    fi
    if test "$host_cpu" = ia64; then
      _LT_AC_TAGVAR(hardcode_direct, $1)=no
      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
    else
      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
    fi
    _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH, but as the default
			 # location of the library.

    case $cc_basename in
      CC)
        # FIXME: insert proper C++ library support
        _LT_AC_TAGVAR(ld_shlibs, $1)=no
        ;;
      aCC)
	case $host_os in
        hpux9*)
            _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
          ;;
      *)
          if test "$host_cpu" = ia64; then
            _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname -o $lib $linker_flags $libobjs $deplibs'
          else
            _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
          fi
          ;;
	esac
        # Commands to make compiler produce verbose output that lists
        # what "hidden" libraries, object files and flags are used when
        # linking a shared library.
        #
        # There doesn't appear to be a way to prevent this compiler from
        # explicitly linking system object files so we need to strip them
        # from the output so that they don't get included in the library
        # dependencies.
        output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | egrep "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
        ;;
      *)
        if test $GXX = yes; then
	  if test $with_gnu_ld = no; then
	    case "$host_os" in
            hpux9*)
                _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
                ;;
          *)
                if test "$host_cpu" = ia64; then
                  _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname -o $lib $linker_flags $libobjs $deplibs'
                else
                  _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
                fi
                ;;
	    esac
	  fi
	else
	  # FIXME: insert proper C++ library support
          _LT_AC_TAGVAR(ld_shlibs, $1)=no
	fi
        ;;
    esac
    ;;
  irix5* | irix6*)
    case $cc_basename in
      CC)
        # SGI C++
        _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib'

	# Archives containing C++ object files must be created using
	# "CC -ar", where "CC" is the IRIX C++ compiler.  This is
	# necessary to make sure instantiated templates are included
	# in the archive.
	_LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -ar -WR,-u -o $oldlib $oldobjs'
	;;
      *)
        if test "$GXX" = yes; then
          if test "$with_gnu_ld" = no; then
            _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib'
          else
            _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -o $lib'
          fi
        fi
        _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
        ;;
    esac
    _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
    _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
    ;;
  linux*)
    case $cc_basename in
      KCC)
        # Kuck and Associates, Inc. (KAI) C++ Compiler

        # KCC will only create a shared library if the output file
        # ends with ".so" (or ".sl" for HP-UX), so rename the library
        # to its proper name (with version) after linking.
        _LT_AC_TAGVAR(archive_cmds, $1)='templib=`echo $lib | sed -e "s/\.so\..*/\.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
        _LT_AC_TAGVAR(archive_expsym_cmds, $1)='templib=`echo $lib | sed -e "s/\.so\..*/\.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib'

        # Commands to make compiler produce verbose output that lists
        # what "hidden" libraries, object files and flags are used when
        # linking a shared library.
        #
        # There doesn't appear to be a way to prevent this compiler from
        # explicitly linking system object files so we need to strip them
        # from the output so that they don't get included in the library
        # dependencies.
        output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest.so 2>&1 | egrep "ld"`; rm -f libconftest.so; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'

        _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath,$libdir'
        _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'

	# Archives containing C++ object files must be created using
	# "CC -Bstatic", where "CC" is the KAI C++ compiler.
        _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs'
        ;;
      cxx)
        # Compaq C++
        _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
        _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname  -o $lib ${wl}-retain-symbols-file $wl$export_symbols'

        runpath_var=LD_RUN_PATH
        _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
        _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:

        # Commands to make compiler produce verbose output that lists
        # what "hidden" libraries, object files and flags are used when
        # linking a shared library.
        #
        # There doesn't appear to be a way to prevent this compiler from
        # explicitly linking system object files so we need to strip them
        # from the output so that they don't get included in the library
        # dependencies.
        output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld"`; templist=`echo $templist | sed "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
        ;;
    esac
    ;;
  lynxos*)
    # FIXME: insert proper C++ library support
    _LT_AC_TAGVAR(ld_shlibs, $1)=no
    ;;
  m88k*)
    # FIXME: insert proper C++ library support
    _LT_AC_TAGVAR(ld_shlibs, $1)=no
    ;;
  mvs*)
    case $cc_basename in
      cxx)
        # FIXME: insert proper C++ library support
        _LT_AC_TAGVAR(ld_shlibs, $1)=no
        ;;
      *)
        # FIXME: insert proper C++ library support
        _LT_AC_TAGVAR(ld_shlibs, $1)=no
        ;;
    esac
    ;;
  netbsd*)
    # NetBSD uses g++ - do we need to do anything?
    ;;
  osf3*)
    case $cc_basename in
      KCC)
        # Kuck and Associates, Inc. (KAI) C++ Compiler

        # KCC will only create a shared library if the output file
        # ends with ".so" (or ".sl" for HP-UX), so rename the library
        # to its proper name (with version) after linking.
        _LT_AC_TAGVAR(archive_cmds, $1)='templib=`echo $lib | sed -e "s/\.so\..*/\.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'

        _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
        _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:

	# Archives containing C++ object files must be created using
	# "CC -Bstatic", where "CC" is the KAI C++ compiler.
        _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs'

        ;;
      RCC)
        # Rational C++ 2.4.1
        # FIXME: insert proper C++ library support
        _LT_AC_TAGVAR(ld_shlibs, $1)=no
        ;;
      cxx)
        _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
        _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && echo ${wl}-set_version $verstring` -update_registry ${objdir}/so_locations -o $lib'

        _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
        _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:

        # Commands to make compiler produce verbose output that lists
        # what "hidden" libraries, object files and flags are used when
        # linking a shared library.
        #
        # There doesn't appear to be a way to prevent this compiler from
        # explicitly linking system object files so we need to strip them
        # from the output so that they don't get included in the library
        # dependencies.
        output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | sed "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
        ;;
      *)
        if test "$GXX" = yes && test "$with_gnu_ld" = no; then
          _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
          _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib'

          _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
          _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:

          # Commands to make compiler produce verbose output that lists
          # what "hidden" libraries, object files and flags are used when
          # linking a shared library.
          output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | egrep "\-L"'

	else
          # FIXME: insert proper C++ library support
          _LT_AC_TAGVAR(ld_shlibs, $1)=no
        fi
        ;;
    esac
    ;;
  osf4* | osf5*)
    case $cc_basename in
      KCC)
        # Kuck and Associates, Inc. (KAI) C++ Compiler

        # KCC will only create a shared library if the output file
        # ends with ".so" (or ".sl" for HP-UX), so rename the library
        # to its proper name (with version) after linking.
        _LT_AC_TAGVAR(archive_cmds, $1)='templib=`echo $lib | sed -e "s/\.so\..*/\.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'

        _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
        _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:

	# Archives containing C++ object files must be created using
	# the KAI C++ compiler.
        _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -o $oldlib $oldobjs'
        ;;
      RCC)
        # Rational C++ 2.4.1
        # FIXME: insert proper C++ library support
        _LT_AC_TAGVAR(ld_shlibs, $1)=no
        ;;
      cxx)
        _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
        _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib'
	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "-exported_symbol " >> $lib.exp; echo "\$i" >> $lib.exp; done~
	  echo "-hidden">> $lib.exp~
	  $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname -Wl,-input -Wl,$lib.exp  `test -n "$verstring" && echo -set_version	$verstring` -update_registry $objdir/so_locations -o $lib~
	  $rm $lib.exp'

        _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
        _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:

        # Commands to make compiler produce verbose output that lists
        # what "hidden" libraries, object files and flags are used when
        # linking a shared library.
        #
        # There doesn't appear to be a way to prevent this compiler from
        # explicitly linking system object files so we need to strip them
        # from the output so that they don't get included in the library
        # dependencies.
        output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | sed "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
        ;;
      *)
        if test "$GXX" = yes && test "$with_gnu_ld" = no; then
          _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
         _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib'

          _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
          _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:

          # Commands to make compiler produce verbose output that lists
          # what "hidden" libraries, object files and flags are used when
          # linking a shared library.
          output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | egrep "\-L"'

	else
          # FIXME: insert proper C++ library support
          _LT_AC_TAGVAR(ld_shlibs, $1)=no
	fi
        ;;
    esac
    ;;
  psos*)
    # FIXME: insert proper C++ library support
    _LT_AC_TAGVAR(ld_shlibs, $1)=no
    ;;
  sco*)
    case $cc_basename in
      CC)
        # FIXME: insert proper C++ library support
        _LT_AC_TAGVAR(ld_shlibs, $1)=no
        ;;
      *)
        # FIXME: insert proper C++ library support
        _LT_AC_TAGVAR(ld_shlibs, $1)=no
        ;;
    esac
    ;;
  sunos4*)
    case $cc_basename in
      CC)
        # Sun C++ 4.x
        # FIXME: insert proper C++ library support
        _LT_AC_TAGVAR(ld_shlibs, $1)=no
        ;;
      lcc)
        # Lucid
        # FIXME: insert proper C++ library support
        _LT_AC_TAGVAR(ld_shlibs, $1)=no
        ;;
      *)
        # FIXME: insert proper C++ library support
        _LT_AC_TAGVAR(ld_shlibs, $1)=no
        ;;
    esac
    ;;
  solaris*)
    case $cc_basename in
      CC)
	# Sun C++ 4.2, 5.x and Centerline C++
        _LT_AC_TAGVAR(no_undefined_flag, $1)=' -zdefs'
        _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -nolib -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
        _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
        $CC -G${allow_undefined_flag} -nolib ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'

        _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
        _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
        case $host_os in
          solaris2.[0-5] | solaris2.[0-5].*) ;;
          *)
            # The C++ compiler is used as linker so we must use $wl
            # flag to pass the commands to the underlying system
            # linker.
            # Supported since Solaris 2.6 (maybe 2.5.1?)
            _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
            ;;
        esac
        _LT_AC_TAGVAR(link_all_deplibs, $1)=yes

        # Commands to make compiler produce verbose output that lists
        # what "hidden" libraries, object files and flags are used when
        # linking a shared library.
        #
        # There doesn't appear to be a way to prevent this compiler from
        # explicitly linking system object files so we need to strip them
        # from the output so that they don't get included in the library
        # dependencies.
        output_verbose_link_cmd='templist=`$CC -G $CFLAGS -v conftest.$objext 2>&1 | egrep "\-R|\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'

	# Archives containing C++ object files must be created using
	# "CC -xar", where "CC" is the Sun C++ compiler.  This is
        # necessary to make sure instantiated templates are included
        # in the archive.
        _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs'
        ;;
      gcx)
        # Green Hills C++ Compiler
        _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'

        # The C++ compiler must be used to create the archive.
        _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC $LDFLAGS -archive -o $oldlib $oldobjs'
        ;;
      *)
        # GNU C++ compiler with Solaris linker
        if test "$GXX" = yes && test "$with_gnu_ld" = no; then
	  _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-z ${wl}defs'
          if $CC --version | egrep -v '^2\.7' > /dev/null; then
            _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $linker_flags ${wl}-h $wl$soname -o $lib'
            _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
		$CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags~$rm $lib.exp'

            # Commands to make compiler produce verbose output that lists
            # what "hidden" libraries, object files and flags are used when
            # linking a shared library.
            output_verbose_link_cmd="$CC -shared $CFLAGS -v conftest.$objext 2>&1 | egrep \"\-L\""
          else
            # g++ 2.7 appears to require `-G' NOT `-shared' on this
            # platform.
            _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $linker_flags ${wl}-h $wl$soname -o $lib'
            _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
		$CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags~$rm $lib.exp'

            # Commands to make compiler produce verbose output that lists
            # what "hidden" libraries, object files and flags are used when
            # linking a shared library.
            output_verbose_link_cmd="$CC -G $CFLAGS -v conftest.$objext 2>&1 | egrep \"\-L\""
          fi

          _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $wl$libdir'
        fi
        ;;
    esac
    ;;
  sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[[78]]* | unixware7*)
    _LT_AC_TAGVAR(archive_cmds_need_lc, $2)=no
    ;;
  tandem*)
    case $cc_basename in
      NCC)
        # NonStop-UX NCC 3.20
        # FIXME: insert proper C++ library support
        _LT_AC_TAGVAR(ld_shlibs, $1)=no
        ;;
      *)
        # FIXME: insert proper C++ library support
        _LT_AC_TAGVAR(ld_shlibs, $1)=no
        ;;
    esac
    ;;
  vxworks*)
    # FIXME: insert proper C++ library support
    _LT_AC_TAGVAR(ld_shlibs, $1)=no
    ;;
  *)
    # FIXME: insert proper C++ library support
    _LT_AC_TAGVAR(ld_shlibs, $1)=no
    ;;
esac
AC_MSG_RESULT([$_LT_AC_TAGVAR(ld_shlibs, $1)])
test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no

# Figure out "hidden" C++ library dependencies from verbose
# compiler output whening linking a shared library.
cat > conftest.$ac_ext <<EOF
class Foo
{
public:
  Foo (void) { a = 0; }
private:
  int a;
};
EOF


if AC_TRY_EVAL(ac_compile); then
  # Parse the compiler output and extract the necessary
  # objects, libraries and library flags.

  # Sentinel used to keep track of whether or not we are before
  # the conftest object file.
  pre_test_object_deps_done=no

  # The `*' in the case matches for architectures that use `case' in
  # $output_verbose_cmd can trigger glob expansion during the loop
  # eval without this substitution.
  output_verbose_link_cmd="`$echo \"X$output_verbose_link_cmd\" | $Xsed -e \"$no_glob_subst\"`"

  for p in `eval $output_verbose_link_cmd`; do
    case $p in

    -L* | -R* | -l*)
       # Some compilers place space between "-{L,R}" and the path.
       # Remove the space.
       if test $p = "-L" \
          || test $p = "-R"; then
         prev=$p
         continue
       else
         prev=
       fi

       if test "$pre_test_object_deps_done" = no; then
         case $p in
	 -L* | -R*)
	   # Internal compiler library paths should come after those
	   # provided the user.  The postdeps already come after the
	   # user supplied libs so there is no need to process them.
           if test -z "$_LT_AC_TAGVAR(compiler_lib_search_path, $1)"; then
             _LT_AC_TAGVAR(compiler_lib_search_path, $1)="${prev}${p}"
           else
             _LT_AC_TAGVAR(compiler_lib_search_path, $1)="${_LT_AC_TAGVAR(compiler_lib_search_path, $1)} ${prev}${p}"
           fi
           ;;
         # The "-l" case would never come before the object being
         # linked, so don't bother handling this case.
         esac
       else
         if test -z "$_LT_AC_TAGVAR(postdeps, $1)"; then
           _LT_AC_TAGVAR(postdeps, $1)="${prev}${p}"
         else
           _LT_AC_TAGVAR(postdeps, $1)="${_LT_AC_TAGVAR(postdeps, $1)} ${prev}${p}"
         fi
       fi
       ;;

    *.$objext)
       # This assumes that the test object file only shows up
       # once in the compiler output.
       if test "$p" = "conftest.$objext"; then
         pre_test_object_deps_done=yes
         continue
       fi

       if test "$pre_test_object_deps_done" = no; then
         if test -z "$_LT_AC_TAGVAR(predep_objects, $1)"; then
           _LT_AC_TAGVAR(predep_objects, $1)="$p"
         else
           _LT_AC_TAGVAR(predep_objects, $1)="$_LT_AC_TAGVAR(predep_objects, $1) $p"
         fi
       else
         if test -z "$_LT_AC_TAGVAR(postdep_objects, $1)"; then
           _LT_AC_TAGVAR(postdep_objects, $1)="$p"
         else
           _LT_AC_TAGVAR(postdep_objects, $1)="$_LT_AC_TAGVAR(postdep_objects, $1) $p"
         fi
       fi
       ;;

    *) ;; # Ignore the rest.

    esac
  done

  # Clean up.
  rm -f a.out
else
  echo "ltcf-cxx.sh: error: problem compiling test program"
fi

$rm -f confest.$objext

case " $_LT_AC_TAGVAR(postdeps, $1) " in
*" -lc "*) _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no ;;
*) _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes ;;
esac

_LT_AC_TAGVAR(GCC, $1)="$GXX"
_LT_AC_TAGVAR(LD, $1)="$LD"

AC_LIBTOOL_PROG_COMPILER_PIC($1)
AC_LIBTOOL_PROG_CC_C_O($1)
AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)
AC_LIBTOOL_PROG_LD_SHLIBS($1)
AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
AC_LIBTOOL_SYS_LIB_STRIP
AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
AC_LIBTOOL_DLOPEN_SELF($1)

AC_LIBTOOL_CONFIG($1)

AC_LANG_POP
CC="$lt_save_CC"
])# AC_LIBTOOL_LANG_CXX_CONFIG


# AC_LIBTOOL_LANG_GCJ_CONFIG
# --------------------------
# Ensure that the configuration vars for the C compiler are
# suitably defined.  Those variables are subsequently used by
# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
AC_DEFUN([AC_LIBTOOL_LANG_GCJ_CONFIG], [_LT_AC_LANG_GCJ_CONFIG(GCJ)])
AC_DEFUN([_LT_AC_LANG_GCJ_CONFIG],
[AC_LANG_SAVE

# Source file extension for C test sources.
ac_ext=java

# Object file extension for compiled C test sources.
objext=o
_LT_AC_TAGVAR(objext, $1)=$objext

# Code to be used in simple compile tests
lt_simple_compile_test_code="class foo {}"

# Code to be used in simple link tests
lt_simple_link_test_code='public class conftest { public static void main(String[] argv) {}; }'

# ltmain only uses $CC for tagged configurations so make sure $CC is set.
_LT_AC_SYS_COMPILER

# Allow CC to be a program name with arguments.
lt_save_CC="$CC"
CC=${GCJ-"gcj"}
set dummy $CC
compiler="[$]2"
_LT_AC_TAGVAR(compiler, $1)=$CC

# GCJ did not exist at the time GCC didn't implicitly link libc in.
_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no

AC_LIBTOOL_PROG_COMPILER_NO_RTTI($1)
AC_LIBTOOL_PROG_COMPILER_PIC($1)
AC_LIBTOOL_PROG_CC_C_O($1)
AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)
AC_LIBTOOL_PROG_LD_SHLIBS($1)
AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
AC_LIBTOOL_SYS_LIB_STRIP
AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
AC_LIBTOOL_DLOPEN_SELF($1)

AC_LIBTOOL_CONFIG($1)

AC_LANG_RESTORE
CC="$lt_save_CC"
])# AC_LIBTOOL_LANG_GCJ_CONFIG


# AC_LIBTOOL_CONFIG([TAGNAME])
# ----------------------------
# If TAGNAME is not passed, then create an initial libtool script
# with a default configuration from the untagged config vars.  Otherwise
# add code to config.status for appending the configuration named by
# TAGNAME from the matching tagged config vars.
AC_DEFUN([AC_LIBTOOL_CONFIG], 
[# The else clause should only fire when bootstrapping the
# libtool distribution, otherwise you forgot to ship ltmain.sh
# with your package, and you will get complaints that there are
# no rules to generate ltmain.sh.
if test -f "$ltmain"; then
  # Now quote all the things that may contain metacharacters while being
  # careful not to overquote the AC_SUBSTed values.  We take copies of the
  # variables and quote the copies for generation of the libtool script.
  for var in echo old_CC old_CFLAGS AR AR_FLAGS RANLIB LN_S NM SHELL \
    libname_spec library_names_spec soname_spec extract_expsyms_cmds \
    old_striplib striplib file_magic_cmd finish_cmds finish_eval \
    deplibs_check_method reload_flag reload_cmds need_locks \
    lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \
    lt_cv_sys_global_symbol_to_c_name_address \
    sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
    old_postinstall_cmds old_postuninstall_cmds \
    _LT_AC_TAGVAR(compiler, $1) \
    _LT_AC_TAGVAR(CC, $1) \
    _LT_AC_TAGVAR(LD, $1) \
    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1) \
    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1) \
    _LT_AC_TAGVAR(lt_prog_compiler_static, $1) \
    _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) \
    _LT_AC_TAGVAR(export_dynamic_flag_spec, $1) \
    _LT_AC_TAGVAR(thread_safe_flag_spec, $1) \
    _LT_AC_TAGVAR(whole_archive_flag_spec, $1) \
    _LT_AC_TAGVAR(old_archive_cmds, $1) \
    _LT_AC_TAGVAR(old_archive_from_new_cmds, $1) \
    _LT_AC_TAGVAR(predep_objects, $1) \
    _LT_AC_TAGVAR(postdep_objects, $1) \
    _LT_AC_TAGVAR(predeps, $1) \
    _LT_AC_TAGVAR(postdeps, $1) \
    _LT_AC_TAGVAR(compiler_lib_search_path, $1) \
    _LT_AC_TAGVAR(archive_cmds, $1) \
    _LT_AC_TAGVAR(archive_expsym_cmds, $1) \
    _LT_AC_TAGVAR(postinstall_cmds, $1) \
    _LT_AC_TAGVAR(postuninstall_cmds, $1) \
    _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1) \
    _LT_AC_TAGVAR(allow_undefined_flag, $1) \
    _LT_AC_TAGVAR(no_undefined_flag, $1) \
    _LT_AC_TAGVAR(export_symbols_cmds, $1) \
    _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) \
    _LT_AC_TAGVAR(hardcode_libdir_separator, $1) \
    _LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1) \
    _LT_AC_TAGVAR(exclude_expsyms, $1) \
    _LT_AC_TAGVAR(include_expsyms, $1); do

    case $var in
    _LT_AC_TAGVAR(old_archive_cmds, $1) | \
    _LT_AC_TAGVAR(old_archive_from_new_cmds, $1) | \
    _LT_AC_TAGVAR(archive_cmds, $1) | \
    _LT_AC_TAGVAR(archive_expsym_cmds, $1) | \
    _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1) | \
    _LT_AC_TAGVAR(export_symbols_cmds, $1) | \
    extract_expsyms_cmds | reload_cmds | finish_cmds | \
    postinstall_cmds | postuninstall_cmds | \
    old_postinstall_cmds | old_postuninstall_cmds | \
    sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
      # Double-quote double-evaled strings.
      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
      ;;
    *)
      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
      ;;
    esac
  done

  case $lt_echo in
  *'\[$]0 --fallback-echo"')
    lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\[$]0 --fallback-echo"[$]/[$]0 --fallback-echo"/'`
    ;;
  esac

ifelse([$1], [],
  [cfgfile="${ofile}T"
  trap "$rm \"$cfgfile\"; exit 1" 1 2 15
  $rm -f "$cfgfile"
  AC_MSG_NOTICE([creating $ofile])],
  [cfgfile="$ofile"])

  cat <<__EOF__ >> "$cfgfile"
ifelse([$1], [], 
[#! $SHELL

# `$echo "$cfgfile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
# Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP)
# NOTE: Changes made to this file will be lost: look at ltmain.sh.
#
# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001
# Free Software Foundation, Inc.
#
# This file is part of GNU Libtool:
# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
................................................................................
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
#
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
# configuration script generated by Autoconf, you may include it under
# the same distribution terms that you use for the rest of that program.




# Sed that helps us avoid accidentally triggering echo(1) options like -n.
Xsed="sed -e s/^X//"

# The HP-UX ksh and POSIX shell print the target directory to stdout
# if CDPATH is set.
if test "X\${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi

# The names of the tagged configurations supported by this script.
available_tags=

# ### BEGIN LIBTOOL CONFIG],
[# ### BEGIN LIBTOOL TAG CONFIG: $tagname])

# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:

# Shell to use when invoking shell scripts.
SHELL=$lt_SHELL

# Whether or not to build shared libraries.
build_libtool_libs=$enable_shared

# Whether or not to build static libraries.
build_old_libs=$enable_static

# Whether or not to add -lc for building shared libraries.
build_libtool_need_lc=$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)

# Whether or not to optimize for fast installation.
fast_install=$enable_fast_install

# The host system.
host_alias=$host_alias
host=$host
................................................................................
# An echo program that does not interpret backslashes.
echo=$lt_echo

# The archiver.
AR=$lt_AR
AR_FLAGS=$lt_AR_FLAGS

# A C compiler.
LTCC=$LTCC

# A language-specific compiler.
CC=$lt_[]_LT_AC_TAGVAR(compiler, $1)

# Is the compiler the GNU C compiler?
with_gcc=$_LT_AC_TAGVAR(GCC, $1)

# The linker used to build libraries.
LD=$lt_[]_LT_AC_TAGVAR(LD, $1)

# Whether we need hard or soft links.
LN_S=$lt_LN_S

# A BSD-compatible nm program.
NM=$lt_NM

................................................................................
objdir=$objdir

# How to create reloadable object files.
reload_flag=$lt_reload_flag
reload_cmds=$lt_reload_cmds

# How to pass a linker flag through the compiler.
wl=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)

# Object file suffix (normally "o").
objext="$ac_objext"

# Old archive suffix (normally "a").
libext="$libext"

# Executable file suffix (normally "").
exeext="$exeext"

# Additional compiler flags for building library objects.
pic_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)
pic_mode=$pic_mode

# What is the maximum length of a command?
max_cmd_len=$lt_cv_sys_max_cmd_len

# Does compiler simultaneously support -c and -o options?
compiler_c_o=$lt_[]_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)

# Must we lock files when doing compilation ?
need_locks=$lt_need_locks

# Do we need the lib prefix for modules?
need_lib_prefix=$need_lib_prefix

................................................................................
# Whether dlopen of programs is supported.
dlopen_self=$enable_dlopen_self

# Whether dlopen of statically linked programs is supported.
dlopen_self_static=$enable_dlopen_self_static

# Compiler flag to prevent dynamic linking.
link_static_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_static, $1)

# Compiler flag to turn off builtin functions.
no_builtin_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)

# Compiler flag to allow reflexive dlopens.
export_dynamic_flag_spec=$lt_[]_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)

# Compiler flag to generate shared objects directly from archives.
whole_archive_flag_spec=$lt_[]_LT_AC_TAGVAR(whole_archive_flag_spec, $1)

# Compiler flag to generate thread-safe objects.
thread_safe_flag_spec=$lt_[]_LT_AC_TAGVAR(thread_safe_flag_spec, $1)

# Library versioning type.
version_type=$version_type

# Format of library name prefix.
libname_spec=$lt_libname_spec

................................................................................
library_names_spec=$lt_library_names_spec

# The coded name of the library, if different from the real name.
soname_spec=$lt_soname_spec

# Commands used to build and install an old-style archive.
RANLIB=$lt_RANLIB
old_archive_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_cmds, $1)
old_postinstall_cmds=$lt_old_postinstall_cmds
old_postuninstall_cmds=$lt_old_postuninstall_cmds

# Create an old-style archive from a shared archive.
old_archive_from_new_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_from_new_cmds, $1)

# Create a temporary old-style archive to link instead of a shared archive.
old_archive_from_expsyms_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1)

# Commands used to build and install a shared archive.
archive_cmds=$lt_[]_LT_AC_TAGVAR(archive_cmds, $1)
archive_expsym_cmds=$lt_[]_LT_AC_TAGVAR(archive_expsym_cmds, $1)
postinstall_cmds=$lt_postinstall_cmds
postuninstall_cmds=$lt_postuninstall_cmds

# Commands to strip libraries.
old_striplib=$lt_old_striplib
striplib=$lt_striplib

# Dependencies to place before the objects being linked to create a
# shared library.
predep_objects=$lt_[]_LT_AC_TAGVAR(predep_objects, $1)

# Dependencies to place after the objects being linked to create a
# shared library.
postdep_objects=$lt_[]_LT_AC_TAGVAR(postdep_objects, $1)

# Dependencies to place before the objects being linked to create a
# shared library.
predeps=$lt_[]_LT_AC_TAGVAR(predeps, $1)

# Dependencies to place after the objects being linked to create a
# shared library.
postdeps=$lt_[]_LT_AC_TAGVAR(postdeps, $1)

# The library search path used internally by the compiler when linking
# a shared library.
compiler_lib_search_path=$lt_[]_LT_AC_TAGVAR(compiler_lib_search_path, $1)

# Method to check whether dependent libraries are shared objects.
deplibs_check_method=$lt_deplibs_check_method

# Command to use when deplibs_check_method == file_magic.
file_magic_cmd=$lt_file_magic_cmd

# Flag that allows shared libraries with undefined symbols to be built.
allow_undefined_flag=$lt_[]_LT_AC_TAGVAR(allow_undefined_flag, $1)

# Flag that forces no undefined symbols.
no_undefined_flag=$lt_[]_LT_AC_TAGVAR(no_undefined_flag, $1)

# Commands used to finish a libtool library installation in a directory.
finish_cmds=$lt_finish_cmds

# Same as above, but a single script fragment to be evaled but not shown.
finish_eval=$lt_finish_eval

# Take the output of nm and produce a listing of raw symbols and C names.
global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe

# Transform the output of nm in a proper C declaration
global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl

# Transform the output of nm in a C name address pair
global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address

# This is the shared library runtime path variable.
runpath_var=$runpath_var

# This is the shared library path variable.
shlibpath_var=$shlibpath_var

# Is shlibpath searched before the hard-coded library search path?
shlibpath_overrides_runpath=$shlibpath_overrides_runpath

# How to hardcode a shared library path into an executable.
hardcode_action=$_LT_AC_TAGVAR(hardcode_action, $1)

# Whether we should hardcode library paths into libraries.
hardcode_into_libs=$hardcode_into_libs

# Flag to hardcode \$libdir into a binary during linking.
# This must work even if \$libdir does not exist.
hardcode_libdir_flag_spec=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)

# Whether we need a single -rpath flag with a separated argument.
hardcode_libdir_separator=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_separator, $1)

# Set to yes if using DIR/libNAME.so during linking hardcodes DIR into the
# resulting binary.
hardcode_direct=$_LT_AC_TAGVAR(hardcode_direct, $1)

# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
# resulting binary.
hardcode_minus_L=$_LT_AC_TAGVAR(hardcode_minus_L, $1)

# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
# the resulting binary.
hardcode_shlibpath_var=$_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)

# Variables whose values should be saved in libtool wrapper scripts and
# restored at relink time.
variables_saved_for_relink="$variables_saved_for_relink"

# Whether libtool must link a program against all its dependency libraries.
link_all_deplibs=$_LT_AC_TAGVAR(link_all_deplibs, $1)

# Compile-time system search path for libraries
sys_lib_search_path_spec=$lt_sys_lib_search_path_spec

# Run-time system search path for libraries
sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec

# Fix the shell variable \$srcfile for the compiler.
fix_srcfile_path="$_LT_AC_TAGVAR(fix_srcfile_path, $1)"

# Set to yes if exported symbols are required.
always_export_symbols=$_LT_AC_TAGVAR(always_export_symbols, $1)

# The commands to list exported symbols.
export_symbols_cmds=$lt_[]_LT_AC_TAGVAR(export_symbols_cmds, $1)

# The commands to extract the exported symbol list from a shared archive.
extract_expsyms_cmds=$lt_extract_expsyms_cmds

# Symbols that should not be listed in the preloaded symbols.
exclude_expsyms=$lt_[]_LT_AC_TAGVAR(exclude_expsyms, $1)

# Symbols that must always be exported.
include_expsyms=$lt_[]_LT_AC_TAGVAR(include_expsyms, $1)

ifelse([$1],[],
[# ### END LIBTOOL CONFIG], 
[# ### END LIBTOOL TAG CONFIG: $tagname])

__EOF__

ifelse([$1],[], [
  case $host_os in
  aix3*)
    cat <<\EOF >> "$cfgfile"

# AIX sometimes has problems with the GCC collect2 program.  For some
# reason, if we set the COLLECT_NAMES environment variable, the problems
# vanish in a puff of smoke.
if test "X${COLLECT_NAMES+set}" != Xset; then
  COLLECT_NAMES=
  export COLLECT_NAMES
fi
EOF
    ;;



  cygwin* | mingw* | pw32* | os2*)
    cat <<'EOF' >> "$cfgfile"
    # This is a source program that is used to create dlls on Windows
    # Don't remove nor modify the starting and closing comments
    _LT_AC_FILE_LTDLL_C
    # This is a source program that is used to create import libraries
    # on Windows for dlls which lack them. Don't remove nor modify the
    # starting and closing comments
    _LT_AC_FILE_IMPGEN_C
EOF
    ;;
  esac

  # We use sed instead of cat because bash on DJGPP gets confused if
  # if finds mixed CR/LF and LF-only lines.  Since sed operates in
  # text mode, it properly converts lines to CR/LF.  This bash problem
  # is reportedly fixed, but why not run on old versions too?
  sed '$q' "$ltmain" >> "$cfgfile" || (rm -f "$cfgfile"; exit 1)

  mv -f "$cfgfile" "$ofile" || \
    (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
  chmod +x "$ofile"
])
else
  # If there is no Makefile yet, we rely on a make rule to execute
  # `config.status --recheck' to rerun these tests and create the
  # libtool script then.
  test -f Makefile && make "$ltmain"
fi
])# AC_LIBTOOL_CONFIG


# AC_LIBTOOL_PROG_COMPILER_NO_RTTI([TAGNAME])
# -------------------------------------------
AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_NO_RTTI],
[AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl

_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=

if test "$GCC" = yes; then
  _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin'

  AC_LIBTOOL_COMPILER_OPTION([if $compiler supports -fno-rtti -fno-exceptions],
    lt_cv_prog_compiler_rtti_exceptions,
    [-fno-rtti -fno-exceptions -c conftest.$ac_ext], [],
    [_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)="$_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) -fno-rtti -fno-exceptions"])
fi
])# AC_LIBTOOL_PROG_COMPILER_NO_RTTI


# AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE
# ---------------------------------
AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE],
[AC_REQUIRE([AC_CANONICAL_HOST])
AC_REQUIRE([AC_PROG_NM])
AC_REQUIRE([AC_OBJEXT])
# Check for command to grab the raw symbol name followed by C symbol from nm.
AC_MSG_CHECKING([command to parse $NM output from $compiler object])
AC_CACHE_VAL([lt_cv_sys_global_symbol_pipe],
[
# These are sane defaults that work on at least a few old systems.
# [They come from Ultrix.  What could be older than Ultrix?!! ;)]

# Character class describing NM global symbol codes.
[symcode='[BCDEGRST]']

# Regexp to match symbols that can be accessed directly from C.
[sympat='\([_A-Za-z][_A-Za-z0-9]*\)']

# Transform the above into a raw symbol and a C symbol.
symxfrm='\1 \2\3 \3'

# Transform an extracted symbol line into a proper C declaration
lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern int \1;/p'"

# Transform an extracted symbol line into symbol name and symbol address
lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/  {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode \([[^ ]]*\) \([[^ ]]*\)$/  {\"\2\", (lt_ptr) \&\2},/p'"

# Define system-specific variables.
case $host_os in
aix*)
  [symcode='[BCDT]']
  ;;
cygwin* | mingw* | pw32*)
  [symcode='[ABCDGISTW]']
  ;;
hpux*) # Its linker distinguishes data from code symbols
  if test "$host_cpu" = ia64; then
    [symcode='[ABCDEGRST]']
  fi
  lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
  lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/  {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/  {\"\2\", (lt_ptr) \&\2},/p'"
  ;;
irix*)
  [symcode='[BCDEGRST]']
  ;;
solaris* | sysv5*)
  [symcode='[BDT]']
  ;;
sysv4)
  [symcode='[DFNSTU]']
  ;;
esac

# Handle CRLF in mingw tool chain
opt_cr=
case $host_os in
mingw*)
  opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp
  ;;
esac

# If we're using GNU nm, then use its standard symbol codes.
if $NM -V 2>&1 | egrep '(GNU|with BFD)' > /dev/null; then
  [symcode='[ABCDGISTW]']
fi

# Try without a prefix undercore, then with it.
for ac_symprfx in "" "_"; do

  # Write the raw and C identifiers.
lt_cv_sys_global_symbol_pipe=["sed -n -e 's/^.*[ 	]\($symcode$symcode*\)[ 	][ 	]*\($ac_symprfx\)$sympat$opt_cr$/$symxfrm/p'"]

  # Check to see that the pipe works correctly.
  pipe_works=no

  rm -f conftest*
  cat > conftest.$ac_ext <<EOF
#ifdef __cplusplus
extern "C" {
#endif
char nm_test_var;
void nm_test_func(){}
#ifdef __cplusplus
}
#endif
int main(){nm_test_var='a';nm_test_func();return(0);}
EOF

  if AC_TRY_EVAL(ac_compile); then
    # Now try to grab the symbols.
    nlist=conftest.nm
    if AC_TRY_EVAL(NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) && test -s "$nlist"; then
      # Try sorting and uniquifying the output.
      if sort "$nlist" | uniq > "$nlist"T; then
	mv -f "$nlist"T "$nlist"
      else
	rm -f "$nlist"T
      fi

      # Make sure that we snagged all the symbols we need.
      if egrep ' nm_test_var$' "$nlist" >/dev/null; then
	if egrep ' nm_test_func$' "$nlist" >/dev/null; then
	  cat <<EOF > conftest.$ac_ext
#ifdef __cplusplus
extern "C" {
#endif

EOF
	  # Now generate the symbol file.
	  eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" >> conftest.$ac_ext'

	  cat <<EOF >> conftest.$ac_ext
#if defined (__STDC__) && __STDC__
# define lt_ptr_t void *
#else
# define lt_ptr_t char *
# define const
#endif

/* The mapping between symbol names and symbols. */
const struct {
  const char *name;
  lt_ptr_t address;
}
[lt_preloaded_symbols[] =]
{
EOF
	  sed "s/^$symcode$symcode* \(.*\) \(.*\)$/  {\"\2\", (lt_ptr_t) \&\2},/" < "$nlist" >> conftest.$ac_ext
	  cat <<\EOF >> conftest.$ac_ext
  {0, (lt_ptr_t) 0}
};

#ifdef __cplusplus
}
#endif
EOF
	  # Now try linking the two files.
	  mv conftest.$ac_objext conftstm.$ac_objext
	  lt_save_LIBS="$LIBS"
	  lt_save_CFLAGS="$CFLAGS"
	  LIBS="conftstm.$ac_objext"
	  CFLAGS="$CFLAGS$_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)"
	  if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext}; then
	    pipe_works=yes
	  fi
	  LIBS="$lt_save_LIBS"
	  CFLAGS="$lt_save_CFLAGS"
	else
	  echo "cannot find nm_test_func in $nlist" >&AS_MESSAGE_LOG_FD
	fi
      else
	echo "cannot find nm_test_var in $nlist" >&AS_MESSAGE_LOG_FD
      fi
    else
      echo "cannot run $lt_cv_sys_global_symbol_pipe" >&AS_MESSAGE_LOG_FD
    fi
  else
    echo "$progname: failed program was:" >&AS_MESSAGE_LOG_FD
    cat conftest.$ac_ext >&5
  fi
  rm -f conftest* conftst*

  # Do not use the global_symbol_pipe unless it works.
  if test "$pipe_works" = yes; then
    break
  else
    lt_cv_sys_global_symbol_pipe=
  fi
done
])
if test -z "$lt_cv_sys_global_symbol_pipe"; then
  lt_cv_sys_global_symbol_to_cdecl=
fi
if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then
  AC_MSG_RESULT(failed)
else
  AC_MSG_RESULT(ok)
fi
]) # AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE


# AC_LIBTOOL_PROG_COMPILER_PIC([TAGNAME])
# ---------------------------------------
AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_PIC],
[_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)=
_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
_LT_AC_TAGVAR(lt_prog_compiler_static, $1)=

ifelse([$1],[CXX],[
  # C++ specific cases for pic, static, wl, etc.
  if test "$GXX" = yes; then
    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
  
    case $host_os in
    aix*)
      # All AIX code is PIC.
      if test "$host_cpu" = ia64; then
        # AIX 5 now supports IA64 processor
        _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
      fi
      ;;
    amigaos*)
      # FIXME: we need at least 68020 code to build shared libraries, but
      # adding the `-m68020' flag to GCC prevents building anything better,
      # like `-m68040'.
      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
      ;;
    beos* | irix5* | irix6* | osf3* | osf4* | osf5*)
      # PIC is the default for these OSes.
      ;;
    cygwin* | mingw* | os2*)
      # This hack is so that the source file can tell whether it is being
      # built for inclusion in a dll (and should export symbols for example).
      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'
      ;;
    darwin* | rhapsody*)
      # PIC is the default on this platform
      # Common symbols not allowed in MH_DYLIB files
      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
      ;;
    *djgpp*)
      # DJGPP does not support shared libraries at all
      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
      ;;
    sysv4*MP*)
      if test -d /usr/nec; then
        _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic
      fi
      ;;
    hpux*)
      # PIC is the default for IA64 HP-UX, but not for PA HP-UX.
      if test "$host_cpu" != ia64; then
        _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
      fi
      ;;
    *)
      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
      ;;
    esac
  else
    case $host_os in
      aix4* | aix5*)
        # All AIX code is PIC.
        if test "$host_cpu" = ia64; then
          # AIX 5 now supports IA64 processor
          _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
        else
          _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'
        fi
        ;;
      chorus*)
        case $cc_basename in
        cxch68)
          # Green Hills C++ Compiler
          # _LT_AC_TAGVAR(lt_prog_compiler_static, $1)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a"
          ;;
        esac
        ;;
      dgux*)
        case $cc_basename in
          ec++)
            _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
            ;;
          ghcx)
            # Green Hills C++ Compiler
            _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
            ;;
          *)
            ;;
        esac
        ;;
      freebsd*)
        # FreeBSD uses GNU C++
        ;;
      hpux9* | hpux10* | hpux11*)
        case $cc_basename in
          CC)
            _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
            _LT_AC_TAGVAR(lt_prog_compiler_static, $1)="${ac_cv_prog_cc_wl}-a ${ac_cv_prog_cc_wl}archive"
            if test "$host_cpu" != ia64; then
              _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
            fi
            ;;
          aCC)
            _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
            _LT_AC_TAGVAR(lt_prog_compiler_static, $1)="${ac_cv_prog_cc_wl}-a ${ac_cv_prog_cc_wl}archive"
            if test "$host_cpu" != ia64; then
              _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
            fi
            ;;
          *)
            ;;
        esac
        ;;
      irix5* | irix6*)
        case $cc_basename in
          CC)
            _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
            _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
	    # CC pic flag -KPIC is the default.
            ;;
          *)
            ;;
        esac
        ;;
      linux*)
        case $cc_basename in
          KCC)
            # KAI C++ Compiler
            _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'
            _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
            ;;
          cxx)
            # Compaq C++
            # Make sure the PIC flag is empty.  It appears that all Alpha
            # Linux and Compaq Tru64 Unix objects are PIC.
            _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
            _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
            ;;
          *)
            ;;
        esac
        ;;
      lynxos*)
        ;;
      m88k*)
        ;;
      mvs*)
        case $cc_basename in
          cxx)
            _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-W c,exportall'
            ;;
          *)
            ;;
        esac
        ;;
      netbsd*)
        ;;
      osf3* | osf4* | osf5*)
        case $cc_basename in
          KCC)
            _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'
            ;;
          RCC)
            # Rational C++ 2.4.1
            _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
            ;;
          cxx)
            # Digital/Compaq C++
            _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
            # Make sure the PIC flag is empty.  It appears that all Alpha
            # Linux and Compaq Tru64 Unix objects are PIC.
            _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
            _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
            ;;
          *)
            ;;
        esac
        ;;
      psos*)
        ;;
      sco*)
        case $cc_basename in
          CC)
            _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
            ;;
          *)
            ;;
        esac
        ;;
      solaris*)
        case $cc_basename in
          CC)
            # Sun C++ 4.2, 5.x and Centerline C++
            _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
            _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
            _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
            ;;
          gcx)
            # Green Hills C++ Compiler
            _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
            ;;
          *)
            ;;
        esac
        ;;
      sunos4*)
        case $cc_basename in
          CC)
            # Sun C++ 4.x
            _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
            _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
            ;;
          lcc)
            # Lucid
            _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
            ;;
          *)
            ;;
        esac
        ;;
      tandem*)
        case $cc_basename in
          NCC)
            # NonStop-UX NCC 3.20
            _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
            ;;
          *)
            ;;
        esac
        ;;
      unixware*)
        ;;
      vxworks*)
        ;;
      *)
        _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
        ;;
    esac
  fi
],
[AC_MSG_CHECKING([for $compiler option to produce PIC])
  if test "$GCC" = yes; then
    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
  
    case $host_os in
      aix*)
      # All AIX code is PIC.
      if test "$host_cpu" = ia64; then
        # AIX 5 now supports IA64 processor
        _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
      fi
      ;;
  
    amigaos*)
      # FIXME: we need at least 68020 code to build shared libraries, but
      # adding the `-m68020' flag to GCC prevents building anything better,
      # like `-m68040'.
      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
      ;;
  
    beos* | irix5* | irix6* | osf3* | osf4* | osf5*)
      # PIC is the default for these OSes.
      ;;
  
    cygwin* | mingw* | pw32* | os2*)
      # This hack is so that the source file can tell whether it is being
      # built for inclusion in a dll (and should export symbols for example).
      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'
      ;;
  
    darwin* | rhapsody*)
      # PIC is the default on this platform
      # Common symbols not allowed in MH_DYLIB files
      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
      ;;
  
    msdosdjgpp*)
      # Just because we use GCC doesn't mean we suddenly get shared libraries
      # on systems that don't support them.
      _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
      enable_shared=no
      ;;
  
    sysv4*MP*)
      if test -d /usr/nec; then
        _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic
      fi
      ;;

    hpux*)
      # PIC is the default for IA64 HP-UX, but not for PA HP-UX.
      if test "$host_cpu" != ia64; then
        _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
      fi
      ;;
  
    *)
      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
      ;;
    esac
  else
    # PORTME Check for flag to pass linker flags through the system compiler.
    case $host_os in
    aix*)
      _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
      if test "$host_cpu" = ia64; then
        # AIX 5 now supports IA64 processor
        _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
      else
        _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'
      fi
      ;;
  
    cygwin* | mingw* | pw32* | os2*)
      # This hack is so that the source file can tell whether it is being
      # built for inclusion in a dll (and should export symbols for example).
      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'
      ;;
  
    hpux9* | hpux10* | hpux11*)
      _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
      if test "$host_cpu" != ia64; then
        _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
      fi
      # Is there a better lt_prog_compiler_static that works with the bundled CC?
      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
      ;;
  
    irix5* | irix6*)
      _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
      # PIC (with -KPIC) is the default.
      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
      ;;
  
    newsos6)
      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
      ;;
  
    osf3* | osf4* | osf5*)
      _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
      # All OSF/1 code is PIC.
      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
      ;;
  
    sco3.2v5*)
      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-Kpic'
      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-dn'
      ;;
  
    solaris*)
      _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
      ;;
  
    sunos4*)
      _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
      ;;
  
    sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
      if test "x$host_vendor" = xsni; then
        _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-LD'
      else
        _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
      fi
      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
      ;;
  
    sysv4*MP*)
      if test -d /usr/nec ;then
        _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-Kconform_pic'
        _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
      fi
      ;;
  
    uts4*)
      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
      ;;
  
    *)
      _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
      ;;
    esac
  fi
])
AC_MSG_RESULT([$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)])

#
# Check to make sure the PIC flag actually works.
#
if test -n "$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)"; then
  AC_LIBTOOL_COMPILER_OPTION([if $compiler PIC flag $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) works],
    _LT_AC_TAGVAR(lt_prog_compiler_pic_works, $1),
    [$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) -DPIC], [],
    [case $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) in
     "" | " "*) ;;
     *) _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=" $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)" ;;
     esac],
    [_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
     _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no])
fi
case "$host_os" in
  # For platforms which do not support PIC, -DPIC is meaningless:
  *djgpp*)
    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
    ;;
  *)
    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) -DPIC"
    ;;
esac
])


# AC_LIBTOOL_PROG_LD_SHLIBS([TAGNAME])
# ------------------------------------
# See if the linker supports building shared libraries.
AC_DEFUN([AC_LIBTOOL_PROG_LD_SHLIBS],
[AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
ifelse([$1],[CXX],[],[
  runpath_var=
  _LT_AC_TAGVAR(allow_undefined_flag, $1)=
  
  _LT_AC_TAGVAR(archive_cmds, $1)=
  _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=
  _LT_AC_TAGVAR(archive_expsym_cmds, $1)=
  _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)=
  _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1)=
  _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=
  _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
  _LT_AC_TAGVAR(thread_safe_flag_spec, $1)=
  _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
  _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
  _LT_AC_TAGVAR(hardcode_direct, $1)=no
  _LT_AC_TAGVAR(hardcode_minus_L, $1)=no
  _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
  _LT_AC_TAGVAR(link_all_deplibs, $1)=unknown
  _LT_AC_TAGVAR(always_export_symbols, $1)=no
  _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | sed '\''s/.* //'\'' | sort | uniq > $export_symbols'
  # include_expsyms should be a list of space-separated symbols to be *always*
  # included in the symbol list
  _LT_AC_TAGVAR(include_expsyms, $1)=
  # exclude_expsyms can be an egrep regular expression of symbols to exclude
  # it will be wrapped by ` (' and `)$', so one must not match beginning or
  # end of line.  Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
  # as well as any symbol that contains `d'.
  _LT_AC_TAGVAR(exclude_expsyms, $1)="_GLOBAL_OFFSET_TABLE_"
  # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
  # platforms (ab)use it in PIC code, but their linkers get confused if
  # the symbol is explicitly referenced.  Since portable code cannot
  # rely on this symbol name, it's probably fine to never include it in
  # preloaded symbol tables.
  extract_expsyms_cmds=
  
  case $host_os in
  cygwin* | mingw* | pw32*)
    # FIXME: the MSVC++ port hasn't been tested in a loooong time
    # When not using gcc, we currently assume that we are using
    # Microsoft Visual C++.
    if test "$GCC" != yes; then
      with_gnu_ld=no
    fi
    ;;
  openbsd*)
    with_gnu_ld=no
    ;;
  esac
  
  _LT_AC_TAGVAR(ld_shlibs, $1)=yes
  if test "$with_gnu_ld" = yes; then
    # If archive_cmds runs LD, not CC, wlarc should be empty
    wlarc='${wl}'
  
    # See if GNU ld supports shared libraries.
    case $host_os in
    aix3* | aix4* | aix5*)
      # On AIX/PPC, the GNU linker is very broken
      if test "$host_cpu" != ia64; then
        _LT_AC_TAGVAR(ld_shlibs, $1)=no
        cat <<EOF 1>&2

*** Warning: the GNU linker, at least up to release 2.9.1, is reported
*** to be unable to reliably create shared libraries on AIX.
*** Therefore, libtool is disabling shared libraries support.  If you
*** really care for shared libraries, you may want to modify your PATH
*** so that a non-GNU linker is found, and then restart.

EOF
      fi
      ;;
  
    amigaos*)
      _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
      _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
  
      # Samuel A. Falvo II <kc5tja@dolphin.openprojects.net> reports
      # that the semantics of dynamic libraries on AmigaOS, at least up
      # to version 4, is to share data among multiple programs linked
      # with the same dynamic library.  Since this doesn't match the
      # behavior of shared libraries on other platforms, we can't use
      # them.
      _LT_AC_TAGVAR(ld_shlibs, $1)=no
      ;;
  
    beos*)
      if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
        _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
        # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
        # support --undefined.  This deserves some investigation.  FIXME
        _LT_AC_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
      else
        _LT_AC_TAGVAR(ld_shlibs, $1)=no
      fi
      ;;
  
    cygwin* | mingw* | pw32*)
      # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless, as there is
      # no search path for DLLs.
      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
      _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
      _LT_AC_TAGVAR(always_export_symbols, $1)=yes
  
      extract_expsyms_cmds='test -f $output_objdir/impgen.c || \
        sed -e "/^# \/\* impgen\.c starts here \*\//,/^# \/\* impgen.c ends here \*\// { s/^# //;s/^# *$//; p; }" -e d < $''0 > $output_objdir/impgen.c~
        test -f $output_objdir/impgen.exe || (cd $output_objdir && \
        if test "x$HOST_CC" != "x" ; then $HOST_CC -o impgen impgen.c ; \
        else $CC -o impgen impgen.c ; fi)~
        $output_objdir/impgen $dir/$soroot > $output_objdir/$soname-def'
  
      _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1)='$DLLTOOL --as=$AS --dllname $soname --def $output_objdir/$soname-def --output-lib $output_objdir/$newlib'
  
      # cygwin and mingw dlls have different entry points and sets of symbols
      # to exclude.
      # FIXME: what about values for MSVC?
      dll_entry=__cygwin_dll_entry@12
      dll_exclude_symbols=DllMain@12,_cygwin_dll_entry@12,_cygwin_noncygwin_dll_entry@12~
      case $host_os in
      mingw*)
        # mingw values
        dll_entry=_DllMainCRTStartup@12
        dll_exclude_symbols=DllMain@12,DllMainCRTStartup@12,DllEntryPoint@12~
        ;;
      esac
  
      # mingw and cygwin differ, and it's simplest to just exclude the union
      # of the two symbol sets.
      dll_exclude_symbols=DllMain@12,_cygwin_dll_entry@12,_cygwin_noncygwin_dll_entry@12,DllMainCRTStartup@12,DllEntryPoint@12
  
      # recent cygwin and mingw systems supply a stub DllMain which the user
      # can override, but on older systems we have to supply one (in ltdll.c)
      if test "x$lt_cv_need_dllmain" = "xyes"; then
        ltdll_obj='$output_objdir/$soname-ltdll.'"$ac_objext "
        ltdll_cmds='test -f $output_objdir/$soname-ltdll.c || sed -e "/^# \/\* ltdll\.c starts here \*\//,/^# \/\* ltdll.c ends here \*\// { s/^# //; p; }" -e d < $''0 > $output_objdir/$soname-ltdll.c~
  	test -f $output_objdir/$soname-ltdll.$ac_objext || (cd $output_objdir && $CC -c $soname-ltdll.c)~'
      else
        ltdll_obj=
        ltdll_cmds=
      fi
  
      # Extract the symbol export list from an `--export-all' def file,
      # then regenerate the def file from the symbol export list, so that
      # the compiled dll only exports the symbol export list.
      # Be careful not to strip the DATA tag left by newer dlltools.
      _LT_AC_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds"'
        $DLLTOOL --export-all --exclude-symbols '$dll_exclude_symbols' --output-def $output_objdir/$soname-def '$ltdll_obj'$libobjs $convenience~
        [sed -e "1,/EXPORTS/d" -e "s/ @ [0-9]*//" -e "s/ *;.*$//"] < $output_objdir/$soname-def > $export_symbols'
  
      # If the export-symbols file already is a .def file (1st line
      # is EXPORTS), use it as is.
      # If DATA tags from a recent dlltool are present, honour them!
      _LT_AC_TAGVAR(archive_expsym_cmds, $1)='if test "x`head -1 $export_symbols`" = xEXPORTS; then
          cp $export_symbols $output_objdir/$soname-def;
        else
          echo EXPORTS > $output_objdir/$soname-def;
          _lt_hint=1;
          cat $export_symbols | while read symbol; do
           set dummy \$symbol;
           case \[$]# in
             2) echo "   \[$]2 @ \$_lt_hint ; " >> $output_objdir/$soname-def;;
             *) echo "   \[$]2 @ \$_lt_hint \[$]3 ; " >> $output_objdir/$soname-def;;
           esac;
           _lt_hint=`expr 1 + \$_lt_hint`;
          done;
        fi~
        '"$ltdll_cmds"'
        $CC -Wl,--base-file,$output_objdir/$soname-base '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags~
        $DLLTOOL --as=$AS --dllname $soname --exclude-symbols '$dll_exclude_symbols' --def $output_objdir/$soname-def --base-file $output_objdir/$soname-base --output-exp $output_objdir/$soname-exp~
        $CC -Wl,--base-file,$output_objdir/$soname-base $output_objdir/$soname-exp '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags~
        $DLLTOOL --as=$AS --dllname $soname --exclude-symbols '$dll_exclude_symbols' --def $output_objdir/$soname-def --base-file $output_objdir/$soname-base --output-exp $output_objdir/$soname-exp --output-lib $output_objdir/$libname.dll.a~
        $CC $output_objdir/$soname-exp '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags'
      ;;
  
    darwin* | rhapsody*)
      _LT_AC_TAGVAR(allow_undefined_flag, $1)='-undefined suppress'
      # FIXME: Relying on posixy $() will cause problems for
      #        cross-compilation, but unfortunately the echo tests do not
      #        yet detect zsh echo's removal of \ escapes.
      _LT_AC_TAGVAR(archive_cmds, $1)='$CC $(test .$module = .yes && echo -bundle || echo -dynamiclib) $allow_undefined_flag -o $lib $libobjs $deplibs$linkopts -install_name $rpath/$soname $(test -n "$verstring" -a x$verstring != x0.0 && echo $verstring)'
      # We need to add '_' to the symbols in $export_symbols first
      #_LT_AC_TAGVAR(archive_expsym_cmds, $1)="$_LT_AC_TAGVAR(archive_cmds, $1)"' && strip -s $export_symbols'
      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
      _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-all_load $convenience'
      ;;
  
    netbsd*)
      if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
        _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
        wlarc=
      else
        _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nodefaultlibs $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
        _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared -nodefaultlibs $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
      fi
      ;;
  
    solaris* | sysv5*)
      if $LD -v 2>&1 | egrep 'BFD 2\.8' > /dev/null; then
        _LT_AC_TAGVAR(ld_shlibs, $1)=no
        cat <<EOF 1>&2
  
*** Warning: The releases 2.8.* of the GNU linker cannot reliably
*** create shared libraries on Solaris systems.  Therefore, libtool
*** is disabling shared libraries support.  We urge you to upgrade GNU
*** binutils to release 2.9.1 or newer.  Another option is to modify
*** your PATH or compiler configuration so that the native linker is
*** used, and then restart.
  
EOF
      elif $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
        _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
        _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
      else
        _LT_AC_TAGVAR(ld_shlibs, $1)=no
      fi
      ;;
  
    sunos4*)
      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
      wlarc=
      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
      ;;
  
    *)
      if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
        _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
        _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
      else
        _LT_AC_TAGVAR(ld_shlibs, $1)=no
      fi
      ;;
    esac
  
    if test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = yes; then
      runpath_var=LD_RUN_PATH
      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
      _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
      case $host_os in
      cygwin* | mingw* | pw32*)
        # dlltool doesn't understand --whole-archive et. al.
        _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
        ;;
      *)
        # ancient GNU ld didn't support --whole-archive et. al.
        if $LD --help 2>&1 | egrep 'no-whole-archive' > /dev/null; then
  	_LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
        else
  	_LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
        fi
        ;;
      esac
    fi
  else
    # PORTME fill in a description of your system's linker (not GNU ld)
    case $host_os in
    aix3*)
      _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
      _LT_AC_TAGVAR(always_export_symbols, $1)=yes
      _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
      # Note: this linker hardcodes the directories in LIBPATH if there
      # are no directories specified by -L.
      _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
      if test "$GCC" = yes && test -z "$link_static_flag"; then
        # Neither direct hardcoding nor static linking is supported with a
        # broken collect2.
        _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported
      fi
      ;;
  
    aix4* | aix5*)
      if test "$host_cpu" = ia64; then
        # On IA64, the linker does run time linking by default, so we don't
        # have to do anything special.
        aix_use_runtimelinking=no
        exp_sym_flag='-Bexport'
        no_entry_flag=""
      else
        aix_use_runtimelinking=no
  
        # Test if we are trying to use run time linking or normal
        # AIX style linking. If -brtl is somewhere in LDFLAGS, we
        # need to do runtime linking.
        case $host_os in aix4.[[23]]|aix4.[[23]].*|aix5*)
          for ld_flag in $LDFLAGS; do
  	  if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
  	    aix_use_runtimelinking=yes
  	    break
  	  fi
          done
        esac
  
        exp_sym_flag='-bexport'
        no_entry_flag='-bnoentry'
      fi
  
      # When large executables or shared objects are built, AIX ld can
      # have problems creating the table of contents.  If linking a library
      # or program results in "error TOC overflow" add -mminimal-toc to
      # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
      # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
  
      _LT_AC_TAGVAR(archive_cmds, $1)=''
      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
      _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':'
      _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
  
      if test "$GCC" = yes; then
        case $host_os in aix4.[012]|aix4.[012].*)
        # We only want to do this on AIX 4.2 and lower, the check
        # below for broken collect2 doesn't work under 4.3+
          collect2name=`${CC} -print-prog-name=collect2`
          if test -f "$collect2name" && \
  	   strings "$collect2name" | grep resolve_lib_name >/dev/null
          then
  	  # We have reworked collect2
  	  _LT_AC_TAGVAR(hardcode_direct, $1)=yes
          else
  	  # We have old collect2
  	  _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported
  	  # It fails to find uninstalled libraries when the uninstalled
  	  # path is not listed in the libpath.  Setting hardcode_minus_L
  	  # to unsupported forces relinking
  	  _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
  	  _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
  	  _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
          fi
        esac
        shared_flag='-shared'
      else
        # not using gcc
        if test "$host_cpu" = ia64; then
  	# VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
  	# chokes on -Wl,-G. The following line is correct:
          shared_flag='-G'
        else
  	if test "$aix_use_runtimelinking" = yes; then
            shared_flag='${wl}-G'
          else
            shared_flag='${wl}-bM:SRE'
  	fi
        fi
      fi
  
      # It seems that -bexpall does not export symbols beginning with
      # underscore (_), so it is better to generate a list of symbols to export.
      _LT_AC_TAGVAR(always_export_symbols, $1)=yes
      if test "$aix_use_runtimelinking" = yes; then
        # Warning - without using the other runtime loading flags (-brtl),
        # -berok will link without error, but may produce a broken library.
        _LT_AC_TAGVAR(allow_undefined_flag, $1)='-berok'
       # Determine the default libpath from the value encoded in an empty executable.
       _LT_AC_SYS_LIBPATH_AIX
       _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
        _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols $shared_flag"
       else
        if test "$host_cpu" = ia64; then
          _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
          _LT_AC_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
          _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"
        else
         # Determine the default libpath from the value encoded in an empty executable.
         _LT_AC_SYS_LIBPATH_AIX
         _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
          # Warning - without using the other run time loading flags,
          # -berok will link without error, but may produce a broken library.
          _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
          _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
          # -bexpall does not export symbols beginning with underscore (_)
          _LT_AC_TAGVAR(always_export_symbols, $1)=yes
          # Exported symbols can be pulled into shared objects from archives
          _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=' '
          _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
          # This is similar to how AIX traditionally builds it's shared libraries.
          _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
        fi
      fi
      ;;
  
    amigaos*)
      _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
      _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
      # see comment about different semantics on the GNU ld section
      _LT_AC_TAGVAR(ld_shlibs, $1)=no
      ;;
  
    bsdi4*)
      _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=-rdynamic
      ;;
  
    cygwin* | mingw* | pw32*)
      # When not using gcc, we currently assume that we are using
      # Microsoft Visual C++.
      # hardcode_libdir_flag_spec is actually meaningless, as there is
      # no search path for DLLs.
      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
      _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
      # Tell ltmain to make .lib files, not .a files.
      libext=lib
      # FIXME: Setting linknames here is a bad hack.
      _LT_AC_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | sed -e '\''s/ -lc$//'\''` -link -dll~linknames='
      # The linker will automatically build a .lib file if we build a DLL.
      _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)='true'
      # FIXME: Should let the user specify the lib program.
      _LT_AC_TAGVAR(old_archive_cmds, $1)='lib /OUT:$oldlib$oldobjs$old_deplibs'
      fix_srcfile_path='`cygpath -w "$srcfile"`'
      ;;
  
    dgux*)
      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
      ;;
  
    freebsd1*)
      _LT_AC_TAGVAR(ld_shlibs, $1)=no
      ;;
  
    # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
    # support.  Future versions do this automatically, but an explicit c++rt0.o
    # does not break anything, and helps significantly (at the cost of a little
    # extra space).
    freebsd2.2*)
      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
      ;;
  
    # Unfortunately, older versions of FreeBSD 2 do not have this feature.
    freebsd2*)
      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
      _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
      ;;
  
    # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
    freebsd*)
      _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
      ;;
  
    hpux9* | hpux10* | hpux11*)
      if test $GXX = yes; then
        case $host_os in
          hpux9*)
            _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
            ;;
        *)
            if test "$host_cpu" = ia64; then
              _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
            else
              _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
            fi
            ;;
        esac
      else
        case $host_os in
          hpux9*)
            _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
            ;;
          *) 
            if test "$host_cpu" = ia64; then
              _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname -o $lib $libobjs $deplibs $linker_flags'
            else
              _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
            fi
            ;;
        esac
      fi
      if test "$host_cpu" = ia64; then
        _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
        _LT_AC_TAGVAR(hardcode_direct, $1)=no
        _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
      else
        _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
        _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
        _LT_AC_TAGVAR(hardcode_direct, $1)=yes
      fi
      # hardcode_minus_L: Not really in the search PATH,
      # but as the default location of the library.
      _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
      _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
      ;;
  
    irix5* | irix6*)
      if test "$GCC" = yes; then
        _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
      else
        _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
      fi
      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
      _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
      _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
      ;;
  
    netbsd*)
      if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
        _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'  # a.out
      else
        _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared -o $lib $libobjs $deplibs $linker_flags'      # ELF
      fi
      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
      ;;
  
    newsos6)
      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linkopts'
      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
      _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
      ;;
  
    openbsd*)
      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
    
      case "$host_os" in
        openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
          _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
          _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
        ;;
        *)
          _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $linker_flags'
          _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
          if [ "`echo __ELF__ | $CC -E - | grep __ELF__`" = "" -o "$host_os-$host_cpu" = "openbsd2.8-powerpc" ]; then
           _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
          fi
        ;;
      esac
      ;;
  
    os2*)
      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
      _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
      _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
      _LT_AC_TAGVAR(archive_cmds, $1)='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
      _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
      ;;
  
    osf3*)
      if test "$GCC" = yes; then
        _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
        _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
      else
        _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
        _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
      fi
      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
      _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
      ;;
  
    osf4* | osf5*)	# as osf3* with the addition of -msym flag
      if test "$GCC" = yes; then
        _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
        _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
        _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
      else
        _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
        _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
        _LT_AC_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "-exported_symbol " >> $lib.exp; echo "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~
        $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib~$rm $lib.exp'
  
        # Both c and cxx compiler support -rpath directly
        _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
      fi
      _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
      ;;
  
    sco3.2v5*)
      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
      _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport'
      runpath_var=LD_RUN_PATH
      hardcode_runpath_var=yes
      ;;
  
    solaris*)
      _LT_AC_TAGVAR(no_undefined_flag, $1)=' -z defs'
      if test "$GXX" = yes; then
        _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
        _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
          $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp'
      else
        _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
        _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
  	$LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
      fi
      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
      case $host_os in
      [solaris2.[0-5] | solaris2.[0-5].*]) ;;
      *) # Supported since Solaris 2.6 (maybe 2.5.1?)
        _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract' ;;
      esac
      _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
      ;;
  
    sunos4*)
      if test "x$host_vendor" = xsequent; then
        # Use $CC to link under sequent, because it throws in some extra .o
        # files that make .init and .fini sections work.
        _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
      else
        _LT_AC_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
      fi
      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
      _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
      ;;
  
    sysv4)
      if test "x$host_vendor" = xsni; then
        _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -Bsymbolic -h $soname -o $lib $libobjs $deplibs $linkopts'
        _LT_AC_TAGVAR(hardcode_direct, $1)=yes # is this really true???
      else
        _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
        _LT_AC_TAGVAR(hardcode_direct, $1)=no #Motorola manual says yes, but my tests say they lie
      fi
      runpath_var='LD_RUN_PATH'
      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
      ;;
  
    sysv4.3*)
      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
      _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='-Bexport'
      ;;
  
    sysv4*MP*)
      if test -d /usr/nec; then
        _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
        _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
        runpath_var=LD_RUN_PATH
        hardcode_runpath_var=yes
        _LT_AC_TAGVAR(ld_shlibs, $1)=yes
      fi
      ;;
  
    sysv4.2uw2*)
      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags'
      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
      _LT_AC_TAGVAR(hardcode_minus_L, $1)=no
      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
      hardcode_runpath_var=yes
      runpath_var=LD_RUN_PATH
      ;;
  
   sysv5OpenUNIX8* | sysv5UnixWare7* |  sysv5uw[[78]]* | unixware7*)
      _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z ${wl}text'
      if test "$GCC" = yes; then
        _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
      else
        _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
      fi
      runpath_var='LD_RUN_PATH'
      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
      ;;
  
    sysv5*)
      _LT_AC_TAGVAR(no_undefined_flag, $1)=' -z text'
      # $CC -shared without GNU ld will not create a library from C++
      # object files and a static libstdc++, better avoid it by now
      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
      _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
  		$LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
      runpath_var='LD_RUN_PATH'
      ;;
  
    uts4*)
      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
      ;;
  
    *)
      _LT_AC_TAGVAR(ld_shlibs, $1)=no
      ;;
    esac
  fi
])
AC_MSG_RESULT([$_LT_AC_TAGVAR(ld_shlibs, $1)])
test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no

variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
if test "$GCC" = yes; then
  variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
fi

#
# Do we need to explicitly link libc?
#
_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
if test "$enable_shared" = yes && test "$GCC" = yes; then
  case $_LT_AC_TAGVAR(archive_cmds, $1) in
  *'~'*)
    # FIXME: we may have to deal with multi-command sequences.
    ;;
  '$CC '*)
    # Test whether the compiler implicitly links with -lc since on some
    # systems, -lgcc has to come before -lc. If gcc already passes -lc
    # to ld, don't add -lc before -lgcc.
    AC_MSG_CHECKING([whether -lc should be explicitly linked in])
    $rm conftest*
    echo 'static int dummy;' > conftest.$ac_ext

    if AC_TRY_EVAL(ac_compile) 2>conftest.err; then
      soname=conftest
      lib=conftest
      libobjs=conftest.$ac_objext
      deplibs=
      wl=$_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)
      compiler_flags=-v
      linker_flags=-v
      verstring=
      output_objdir=.
      libname=conftest
      lt_save_allow_undefined_flag=$_LT_AC_TAGVAR(allow_undefined_flag, $1)
      _LT_AC_TAGVAR(allow_undefined_flag, $1)=
      if AC_TRY_EVAL(_LT_AC_TAGVAR(archive_cmds, $1) 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1)
      then
	_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
      else
	_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
      fi
      _LT_AC_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag
    else
      cat conftest.err 1>&5
    fi
    $rm conftest*
    AC_MSG_RESULT([$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)])
    ;;
  esac
fi
])# AC_LIBTOOL_PROG_LD_SHLIBS


# _LT_AC_FILE_LTDLL_C
# -------------------
AC_DEFUN([_LT_AC_FILE_LTDLL_C],
[# /* ltdll.c starts here */
# #define WIN32_LEAN_AND_MEAN
# #include <windows.h>
# #undef WIN32_LEAN_AND_MEAN
# #include <stdio.h>
#
# #ifndef __CYGWIN__
# #  ifdef __CYGWIN32__
................................................................................
# BOOL APIENTRY
# DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved)
# {
#   __hDllInstance_base = hInst;
#   return TRUE;
# }
# /* ltdll.c ends here */
])# _LT_AC_FILE_LTDLL_C


# _LT_AC_FILE_IMPGEN_C
# --------------------
AC_DEFUN([_LT_AC_FILE_IMPGEN_C],


[# /* impgen.c starts here */
# /*   Copyright (C) 1999, 2000, 2001 Free Software Foundation, Inc.
#
#  This file is part of GNU libtool.
#
#  This program is free software; you can redistribute it and/or modify
#  it under the terms of the GNU General Public License as published by
#  the Free Software Foundation; either version 2 of the License, or
#  (at your option) any later version.
................................................................................
# 	unsigned long name_rva = pe_as32 (erva+name_rvas+i*4);
# 	printf ("\t%s @ %ld ;\n", erva+name_rva, 1+ i);
#     }
#
#     return 0;
# }
# /* impgen.c ends here */
















])# _LT_AC_FILE_IMPGEN_C

# _LT_AC_TAGVAR(VARNAME, [TAGNAME])
# ---------------------------------
AC_DEFUN([_LT_AC_TAGVAR], [ifelse([$2], [], [$1], [$1_$2])])












































































































































































































































































































































































































































































































































































































# old names
AC_DEFUN([AM_PROG_LIBTOOL],   [AC_PROG_LIBTOOL])
AC_DEFUN([AM_ENABLE_SHARED],  [AC_ENABLE_SHARED($@)])
AC_DEFUN([AM_ENABLE_STATIC],  [AC_ENABLE_STATIC($@)])
AC_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)])
AC_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)])
AC_DEFUN([AM_PROG_LD],        [AC_PROG_LD])
AC_DEFUN([AM_PROG_NM],        [AC_PROG_NM])

# This is just to silence aclocal about the macro not being used
ifelse([AC_DISABLE_FAST_INSTALL])









AC_DEFUN([LT_AC_PROG_GCJ],
[AC_CHECK_TOOL(GCJ, gcj, no)
  test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2"
  AC_SUBST(GCJFLAGS)







































































])

# generated automatically by aclocal 1.7.3 -*- Autoconf -*-

# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002
# Free Software Foundation, Inc.
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.

# libtool.m4 - Configure libtool for the host system. -*-Shell-script-*-

# serial 46 AC_PROG_LIBTOOL





AC_DEFUN([AC_PROG_LIBTOOL],






























[AC_REQUIRE([AC_LIBTOOL_SETUP])dnl



# This can be used to rebuild libtool when needed
LIBTOOL_DEPS="$ac_aux_dir/ltmain.sh"

# Always use our own libtool.
LIBTOOL='$(SHELL) $(top_builddir)/libtool'
AC_SUBST(LIBTOOL)dnl

# Prevent multiple expansion
define([AC_PROG_LIBTOOL], [])
])




AC_DEFUN([AC_LIBTOOL_SETUP],
[AC_PREREQ(2.13)dnl
AC_REQUIRE([AC_ENABLE_SHARED])dnl
AC_REQUIRE([AC_ENABLE_STATIC])dnl
AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl
AC_REQUIRE([AC_CANONICAL_HOST])dnl
AC_REQUIRE([AC_CANONICAL_BUILD])dnl
AC_REQUIRE([AC_PROG_CC])dnl
AC_REQUIRE([AC_PROG_LD])dnl
AC_REQUIRE([AC_PROG_LD_RELOAD_FLAG])dnl
AC_REQUIRE([AC_PROG_NM])dnl
AC_REQUIRE([LT_AC_PROG_SED])dnl

AC_REQUIRE([AC_PROG_LN_S])dnl
AC_REQUIRE([AC_DEPLIBS_CHECK_METHOD])dnl

AC_REQUIRE([AC_OBJEXT])dnl
AC_REQUIRE([AC_EXEEXT])dnl
dnl






_LT_AC_PROG_ECHO_BACKSLASH










































































# Only perform the check for file, if the check method requires it
case $deplibs_check_method in
file_magic*)
  if test "$file_magic_cmd" = '$MAGIC_CMD'; then
    AC_PATH_MAGIC
  fi
  ;;
esac

AC_CHECK_TOOL(RANLIB, ranlib, :)
AC_CHECK_TOOL(STRIP, strip, :)

ifdef([AC_PROVIDE_AC_LIBTOOL_DLOPEN], enable_dlopen=yes, enable_dlopen=no)
ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
enable_win32_dll=yes, enable_win32_dll=no)

AC_ARG_ENABLE(libtool-lock,

  [  --disable-libtool-lock  avoid locking (might break parallel builds)])
test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes

# Some flags need to be propagated to the compiler or linker for good
# libtool support.
case $host in
*-*-irix6*)
  # Find out which ABI we are using.
  echo '[#]line __oline__ "configure"' > conftest.$ac_ext
  if AC_TRY_EVAL(ac_compile); then
    case `/usr/bin/file conftest.$ac_objext` in
    *32-bit*)
      LD="${LD-ld} -32"
      ;;
    *N32*)
      LD="${LD-ld} -n32"
      ;;
    *64-bit*)
      LD="${LD-ld} -64"
      ;;
    esac
  fi
  rm -rf conftest*
  ;;



*-*-sco3.2v5*)
  # On SCO OpenServer 5, we need -belf to get full-featured binaries.
  SAVE_CFLAGS="$CFLAGS"
  CFLAGS="$CFLAGS -belf"
  AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,
    [AC_LANG_SAVE
     AC_LANG_C
     AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])
     AC_LANG_RESTORE])
  if test x"$lt_cv_cc_needs_belf" != x"yes"; then
    # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
    CFLAGS="$SAVE_CFLAGS"
  fi
  ;;

ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
[*-*-cygwin* | *-*-mingw* | *-*-pw32*)
  AC_CHECK_TOOL(DLLTOOL, dlltool, false)
  AC_CHECK_TOOL(AS, as, false)
  AC_CHECK_TOOL(OBJDUMP, objdump, false)

  # recent cygwin and mingw systems supply a stub DllMain which the user
  # can override, but on older systems we have to supply one
  AC_CACHE_CHECK([if libtool should supply DllMain function], lt_cv_need_dllmain,
    [AC_TRY_LINK([],
      [extern int __attribute__((__stdcall__)) DllMain(void*, int, void*);
      DllMain (0, 0, 0);],
      [lt_cv_need_dllmain=no],[lt_cv_need_dllmain=yes])])

  case $host/$CC in
  *-*-cygwin*/gcc*-mno-cygwin*|*-*-mingw*)
    # old mingw systems require "-dll" to link a DLL, while more recent ones
    # require "-mdll"
    SAVE_CFLAGS="$CFLAGS"
    CFLAGS="$CFLAGS -mdll"
    AC_CACHE_CHECK([how to link DLLs], lt_cv_cc_dll_switch,
      [AC_TRY_LINK([], [], [lt_cv_cc_dll_switch=-mdll],[lt_cv_cc_dll_switch=-dll])])
    CFLAGS="$SAVE_CFLAGS" ;;
  *-*-cygwin* | *-*-pw32*)
    # cygwin systems need to pass --dll to the linker, and not link
    # crt.o which will require a WinMain@16 definition.
    lt_cv_cc_dll_switch="-Wl,--dll -nostartfiles" ;;
  esac
  ;;
  ])
esac

_LT_AC_LTCONFIG_HACK

])

# AC_LIBTOOL_HEADER_ASSERT
# ------------------------
AC_DEFUN([AC_LIBTOOL_HEADER_ASSERT],
[AC_CACHE_CHECK([whether $CC supports assert without backlinking],
    [lt_cv_func_assert_works],
    [case $host in
    *-*-solaris*)
      if test "$GCC" = yes && test "$with_gnu_ld" != yes; then
        case `$CC --version 2>/dev/null` in
        [[12]].*) lt_cv_func_assert_works=no ;;
        *)        lt_cv_func_assert_works=yes ;;
        esac
      fi
      ;;
    esac])

if test "x$lt_cv_func_assert_works" = xyes; then
  AC_CHECK_HEADERS(assert.h)
fi
])# AC_LIBTOOL_HEADER_ASSERT

# _LT_AC_CHECK_DLFCN
# --------------------
AC_DEFUN([_LT_AC_CHECK_DLFCN],
[AC_CHECK_HEADERS(dlfcn.h)
])# _LT_AC_CHECK_DLFCN

# AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE
# ---------------------------------
AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE],
[AC_REQUIRE([AC_CANONICAL_HOST])
AC_REQUIRE([AC_PROG_NM])
AC_REQUIRE([AC_OBJEXT])
# Check for command to grab the raw symbol name followed by C symbol from nm.
AC_MSG_CHECKING([command to parse $NM output])
AC_CACHE_VAL([lt_cv_sys_global_symbol_pipe], [dnl



# These are sane defaults that work on at least a few old systems.
# [They come from Ultrix.  What could be older than Ultrix?!! ;)]





# Character class describing NM global symbol codes.
symcode='[[BCDEGRST]]'

# Regexp to match symbols that can be accessed directly from C.
sympat='\([[_A-Za-z]][[_A-Za-z0-9]]*\)'
















# Transform the above into a raw symbol and a C symbol.
symxfrm='\1 \2\3 \3'

# Transform an extracted symbol line into a proper C declaration
lt_cv_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern char \1;/p'"

# Transform an extracted symbol line into symbol name and symbol address
lt_cv_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/  {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode \([[^ ]]*\) \([[^ ]]*\)$/  {\"\2\", (lt_ptr) \&\2},/p'"

# Define system-specific variables.
case $host_os in
aix*)
  symcode='[[BCDT]]'
  ;;
cygwin* | mingw* | pw32*)
  symcode='[[ABCDGISTW]]'
  ;;
hpux*) # Its linker distinguishes data from code symbols
  lt_cv_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern char \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
  lt_cv_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/  {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/  {\"\2\", (lt_ptr) \&\2},/p'"
  ;;
irix* | nonstopux*)
  symcode='[[BCDEGRST]]'
  ;;
osf*)
  symcode='[[BCDEGQRST]]'
  ;;
solaris* | sysv5*)
  symcode='[[BDT]]'
  ;;
sysv4)
  symcode='[[DFNSTU]]'
  ;;
esac

# Handle CRLF in mingw tool chain
opt_cr=
case $host_os in
mingw*)
  opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp
  ;;
esac

# If we're using GNU nm, then use its standard symbol codes.
if $NM -V 2>&1 | egrep '(GNU|with BFD)' > /dev/null; then
  symcode='[[ABCDGISTW]]'
fi

# Try without a prefix undercore, then with it.
for ac_symprfx in "" "_"; do

  # Write the raw and C identifiers.
lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ 	]]\($symcode$symcode*\)[[ 	]][[ 	]]*\($ac_symprfx\)$sympat$opt_cr$/$symxfrm/p'"

  # Check to see that the pipe works correctly.
  pipe_works=no
  rm -f conftest*
  cat > conftest.$ac_ext <<EOF
#ifdef __cplusplus
extern "C" {
#endif
char nm_test_var;
void nm_test_func(){}
#ifdef __cplusplus
}
#endif
int main(){nm_test_var='a';nm_test_func();return(0);}
EOF

  if AC_TRY_EVAL(ac_compile); then
    # Now try to grab the symbols.
    nlist=conftest.nm
    if AC_TRY_EVAL(NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) && test -s "$nlist"; then
      # Try sorting and uniquifying the output.
      if sort "$nlist" | uniq > "$nlist"T; then
	mv -f "$nlist"T "$nlist"
      else
	rm -f "$nlist"T
      fi

      # Make sure that we snagged all the symbols we need.
      if egrep ' nm_test_var$' "$nlist" >/dev/null; then
	if egrep ' nm_test_func$' "$nlist" >/dev/null; then
	  cat <<EOF > conftest.$ac_ext
#ifdef __cplusplus
extern "C" {
#endif

EOF
	  # Now generate the symbol file.
	  eval "$lt_cv_global_symbol_to_cdecl"' < "$nlist" >> conftest.$ac_ext'

	  cat <<EOF >> conftest.$ac_ext
#if defined (__STDC__) && __STDC__
# define lt_ptr void *
#else
# define lt_ptr char *
# define const
#endif

/* The mapping between symbol names and symbols. */
const struct {
  const char *name;
  lt_ptr address;
}
lt_preloaded_symbols[[]] =
{
EOF
	  sed "s/^$symcode$symcode* \(.*\) \(.*\)$/  {\"\2\", (lt_ptr) \&\2},/" < "$nlist" >> conftest.$ac_ext
	  cat <<\EOF >> conftest.$ac_ext
  {0, (lt_ptr) 0}
};

#ifdef __cplusplus
}
#endif
EOF
	  # Now try linking the two files.
	  mv conftest.$ac_objext conftstm.$ac_objext
	  save_LIBS="$LIBS"
	  save_CFLAGS="$CFLAGS"
	  LIBS="conftstm.$ac_objext"
	  CFLAGS="$CFLAGS$no_builtin_flag"
	  if AC_TRY_EVAL(ac_link) && test -s conftest$ac_exeext; then
	    pipe_works=yes
	  fi
	  LIBS="$save_LIBS"
	  CFLAGS="$save_CFLAGS"
	else
	  echo "cannot find nm_test_func in $nlist" >&AC_FD_CC
	fi
      else
	echo "cannot find nm_test_var in $nlist" >&AC_FD_CC
      fi
    else
      echo "cannot run $lt_cv_sys_global_symbol_pipe" >&AC_FD_CC
    fi
  else
    echo "$progname: failed program was:" >&AC_FD_CC
    cat conftest.$ac_ext >&5
  fi
  rm -f conftest* conftst*

  # Do not use the global_symbol_pipe unless it works.
  if test "$pipe_works" = yes; then
    break
  else
    lt_cv_sys_global_symbol_pipe=
  fi
done
])
global_symbol_pipe="$lt_cv_sys_global_symbol_pipe"
if test -z "$lt_cv_sys_global_symbol_pipe"; then
  global_symbol_to_cdecl=
  global_symbol_to_c_name_address=
else
  global_symbol_to_cdecl="$lt_cv_global_symbol_to_cdecl"
  global_symbol_to_c_name_address="$lt_cv_global_symbol_to_c_name_address"
fi
if test -z "$global_symbol_pipe$global_symbol_to_cdec$global_symbol_to_c_name_address";
then
  AC_MSG_RESULT(failed)
else
  AC_MSG_RESULT(ok)
fi
]) # AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE

# _LT_AC_LIBTOOL_SYS_PATH_SEPARATOR
# ---------------------------------
AC_DEFUN([_LT_AC_LIBTOOL_SYS_PATH_SEPARATOR],
[# Find the correct PATH separator.  Usually this is `:', but
# DJGPP uses `;' like DOS.
if test "X${PATH_SEPARATOR+set}" != Xset; then
  UNAME=${UNAME-`uname 2>/dev/null`}
  case X$UNAME in


    *-DOS) lt_cv_sys_path_separator=';' ;;
    *)     lt_cv_sys_path_separator=':' ;;
  esac
  PATH_SEPARATOR=$lt_cv_sys_path_separator
fi
])# _LT_AC_LIBTOOL_SYS_PATH_SEPARATOR


# _LT_AC_PROG_ECHO_BACKSLASH
# --------------------------
# Add some code to the start of the generated configure script which
# will find an echo command which doesn't interpret backslashes.
AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH],
[ifdef([AC_DIVERSION_NOTICE], [AC_DIVERT_PUSH(AC_DIVERSION_NOTICE)],
			      [AC_DIVERT_PUSH(NOTICE)])
_LT_AC_LIBTOOL_SYS_PATH_SEPARATOR

# Check that we are running under the correct shell.
SHELL=${CONFIG_SHELL-/bin/sh}

case X$ECHO in
X*--fallback-echo)
................................................................................
  exec $SHELL "[$]0" --no-reexec ${1+"[$]@"}
fi

if test "X[$]1" = X--fallback-echo; then
  # used as fallback echo
  shift
  cat <<EOF
$*
EOF
  exit 0
fi

# The HP-UX ksh and POSIX shell print the target directory to stdout
# if CDPATH is set.
if test "X${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi
................................................................................
else
  # The Solaris, AIX, and Digital Unix default echo programs unquote
  # backslashes.  This makes it impossible to quote backslashes using
  #   echo "$something" | sed 's/\\/\\\\/g'
  #
  # So, first we look for a working echo in the user's PATH.

  IFS="${IFS= 	}"; save_ifs="$IFS"; IFS=$PATH_SEPARATOR
  for dir in $PATH /usr/ucb; do

    if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
       test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
       echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` &&
       test "X$echo_testing_string" = "X$echo_test_string"; then
      echo="$dir/echo"
      break
    fi
  done
  IFS="$save_ifs"

  if test "X$echo" = Xecho; then
    # We didn't find a better echo, so look for alternatives.
    if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' &&
       echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` &&
       test "X$echo_testing_string" = "X$echo_test_string"; then
      # This shell has a builtin print -r that does the trick.
................................................................................
   ECHO="$CONFIG_SHELL \\\$\[$]0 --fallback-echo"
fi

AC_SUBST(ECHO)
AC_DIVERT_POP
])# _LT_AC_PROG_ECHO_BACKSLASH
































































































































































































































# _LT_AC_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE,
#                           ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING)
# ------------------------------------------------------------------
AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF],

[if test "$cross_compiling" = yes; then :
  [$4]
else
  AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl
  lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
  lt_status=$lt_dlunknown
  cat > conftest.$ac_ext <<EOF
[#line __oline__ "configure"
#include "confdefs.h"

#if HAVE_DLFCN_H
................................................................................
    # compilation failed
    $3
  fi
fi
rm -fr conftest*
])# _LT_AC_TRY_DLOPEN_SELF


# AC_LIBTOOL_DLOPEN_SELF
# -------------------
AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF],

[if test "x$enable_dlopen" != xyes; then
  enable_dlopen=unknown
  enable_dlopen_self=unknown
  enable_dlopen_self_static=unknown
else
  lt_cv_dlopen=no
  lt_cv_dlopen_libs=

................................................................................

  cygwin* | mingw* | pw32*)
    lt_cv_dlopen="LoadLibrary"
    lt_cv_dlopen_libs=
   ;;

  *)
    AC_CHECK_FUNC([shl_load],
          [lt_cv_dlopen="shl_load"],
      [AC_CHECK_LIB([dld], [shl_load],
            [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-dld"],
	[AC_CHECK_FUNC([dlopen],
	      [lt_cv_dlopen="dlopen"],
	  [AC_CHECK_LIB([dl], [dlopen],
	        [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],

	    [AC_CHECK_LIB([svld], [dlopen],
	          [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"],
	      [AC_CHECK_LIB([dld], [dld_link],
	            [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld"])
	      ])
	    ])
	  ])
	])
      ])
    ;;
  esac

  if test "x$lt_cv_dlopen" != xno; then
    enable_dlopen=yes
  else
    enable_dlopen=no
  fi

  case $lt_cv_dlopen in
  dlopen)
    save_CPPFLAGS="$CPPFLAGS"
    AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl
    test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"

    save_LDFLAGS="$LDFLAGS"
    eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"

    save_LIBS="$LIBS"
    LIBS="$lt_cv_dlopen_libs $LIBS"
................................................................................
  case $lt_cv_dlopen_self_static in
  yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;
  *) enable_dlopen_self_static=unknown ;;
  esac
fi
])# AC_LIBTOOL_DLOPEN_SELF

AC_DEFUN([_LT_AC_LTCONFIG_HACK],
[AC_REQUIRE([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE])dnl
# Sed substitution that helps us do robust quoting.  It backslashifies
# metacharacters that are still active within double-quoted strings.
Xsed='sed -e s/^X//'
sed_quote_subst='s/\([[\\"\\`$\\\\]]\)/\\\1/g'



# Same as above, but do not quote variable references.
double_quote_subst='s/\([[\\"\\`\\\\]]\)/\\\1/g'

# Sed substitution to delay expansion of an escaped shell variable in a
# double_quote_subst'ed string.
delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'

# Constants:
rm="rm -f"

# Global variables:
default_ofile=libtool
can_build_shared=yes

# All known linkers require a `.a' archive for static linking (except M$VC,
# which needs '.lib').
libext=a
ltmain="$ac_aux_dir/ltmain.sh"
ofile="$default_ofile"
with_gnu_ld="$lt_cv_prog_gnu_ld"
need_locks="$enable_libtool_lock"

old_CC="$CC"
old_CFLAGS="$CFLAGS"

# Set sane defaults for various variables
test -z "$AR" && AR=ar
test -z "$AR_FLAGS" && AR_FLAGS=cru
test -z "$AS" && AS=as
test -z "$CC" && CC=cc
test -z "$DLLTOOL" && DLLTOOL=dlltool
test -z "$LD" && LD=ld
test -z "$LN_S" && LN_S="ln -s"
test -z "$MAGIC_CMD" && MAGIC_CMD=file
test -z "$NM" && NM=nm
test -z "$OBJDUMP" && OBJDUMP=objdump
test -z "$RANLIB" && RANLIB=:
test -z "$STRIP" && STRIP=:
test -z "$ac_objext" && ac_objext=o

if test x"$host" != x"$build"; then
  ac_tool_prefix=${host_alias}-
else
  ac_tool_prefix=
fi

# Transform linux* to *-*-linux-gnu*, to support old configure scripts.
case $host_os in
linux-gnu*) ;;
linux*) host=`echo $host | sed 's/^\(.*-.*-linux\)\(.*\)$/\1-gnu\2/'`
esac

case $host_os in
aix3*)
  # AIX sometimes has problems with the GCC collect2 program.  For some
  # reason, if we set the COLLECT_NAMES environment variable, the problems
  # vanish in a puff of smoke.
  if test "X${COLLECT_NAMES+set}" != Xset; then
    COLLECT_NAMES=
    export COLLECT_NAMES
  fi
  ;;
esac

# Determine commands to create old-style static archives.
old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs'
old_postinstall_cmds='chmod 644 $oldlib'
old_postuninstall_cmds=

if test -n "$RANLIB"; then
  case $host_os in
  openbsd*)
    old_postinstall_cmds="\$RANLIB -t \$oldlib~$old_postinstall_cmds"
    ;;
  *)
    old_postinstall_cmds="\$RANLIB \$oldlib~$old_postinstall_cmds"
    ;;
  esac
  old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
fi

# Allow CC to be a program name with arguments.
set dummy $CC
compiler="[$]2"

AC_MSG_CHECKING([for objdir])
rm -f .libs 2>/dev/null
mkdir .libs 2>/dev/null
if test -d .libs; then
  objdir=.libs
else
  # MS-DOS does not allow filenames that begin with a dot.
  objdir=_libs
fi
rmdir .libs 2>/dev/null
AC_MSG_RESULT($objdir)


AC_ARG_WITH(pic,
[  --with-pic              try to use only PIC/non-PIC objects [default=use both]],
pic_mode="$withval", pic_mode=default)
test -z "$pic_mode" && pic_mode=default

# We assume here that the value for lt_cv_prog_cc_pic will not be cached
# in isolation, and that seeing it set (from the cache) indicates that
# the associated values are set (in the cache) correctly too.
AC_MSG_CHECKING([for $compiler option to produce PIC])
AC_CACHE_VAL(lt_cv_prog_cc_pic,
[ lt_cv_prog_cc_pic=
  lt_cv_prog_cc_shlib=
  lt_cv_prog_cc_wl=
  lt_cv_prog_cc_static=
  lt_cv_prog_cc_no_builtin=
  lt_cv_prog_cc_can_build_shared=$can_build_shared

  if test "$GCC" = yes; then
    lt_cv_prog_cc_wl='-Wl,'
    lt_cv_prog_cc_static='-static'

    case $host_os in
    aix*)
      # Below there is a dirty hack to force normal static linking with -ldl
      # The problem is because libdl dynamically linked with both libc and
      # libC (AIX C++ library), which obviously doesn't included in libraries
      # list by gcc. This cause undefined symbols with -static flags.
      # This hack allows C programs to be linked with "-static -ldl", but
      # not sure about C++ programs.
      lt_cv_prog_cc_static="$lt_cv_prog_cc_static ${lt_cv_prog_cc_wl}-lC"
      ;;
    amigaos*)
      # FIXME: we need at least 68020 code to build shared libraries, but
      # adding the `-m68020' flag to GCC prevents building anything better,
      # like `-m68040'.
      lt_cv_prog_cc_pic='-m68020 -resident32 -malways-restore-a4'
      ;;
    beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
      # PIC is the default for these OSes.
      ;;
    darwin* | rhapsody*)
      # PIC is the default on this platform
      # Common symbols not allowed in MH_DYLIB files
      lt_cv_prog_cc_pic='-fno-common'
      ;;
    cygwin* | mingw* | pw32* | os2*)
      # This hack is so that the source file can tell whether it is being
      # built for inclusion in a dll (and should export symbols for example).
      lt_cv_prog_cc_pic='-DDLL_EXPORT'
      ;;
    sysv4*MP*)
      if test -d /usr/nec; then
	 lt_cv_prog_cc_pic=-Kconform_pic
      fi
      ;;
    *)
      lt_cv_prog_cc_pic='-fPIC'
      ;;
    esac
  else
    # PORTME Check for PIC flags for the system compiler.
    case $host_os in
    aix3* | aix4* | aix5*)
      lt_cv_prog_cc_wl='-Wl,'
      # All AIX code is PIC.
      if test "$host_cpu" = ia64; then
	# AIX 5 now supports IA64 processor
	lt_cv_prog_cc_static='-Bstatic'
      else
	lt_cv_prog_cc_static='-bnso -bI:/lib/syscalls.exp'
      fi
      ;;

    hpux9* | hpux10* | hpux11*)
      # Is there a better lt_cv_prog_cc_static that works with the bundled CC?
      lt_cv_prog_cc_wl='-Wl,'
      lt_cv_prog_cc_static="${lt_cv_prog_cc_wl}-a ${lt_cv_prog_cc_wl}archive"
      lt_cv_prog_cc_pic='+Z'
      ;;

    irix5* | irix6* | nonstopux*)
      lt_cv_prog_cc_wl='-Wl,'
      lt_cv_prog_cc_static='-non_shared'
      # PIC (with -KPIC) is the default.
      ;;

    cygwin* | mingw* | pw32* | os2*)
      # This hack is so that the source file can tell whether it is being
      # built for inclusion in a dll (and should export symbols for example).
      lt_cv_prog_cc_pic='-DDLL_EXPORT'
      ;;

    newsos6)
      lt_cv_prog_cc_pic='-KPIC'
      lt_cv_prog_cc_static='-Bstatic'
      ;;

    osf3* | osf4* | osf5*)
      # All OSF/1 code is PIC.
      lt_cv_prog_cc_wl='-Wl,'
      lt_cv_prog_cc_static='-non_shared'
      ;;

    sco3.2v5*)
      lt_cv_prog_cc_pic='-Kpic'
      lt_cv_prog_cc_static='-dn'
      lt_cv_prog_cc_shlib='-belf'
      ;;

    solaris*)
      lt_cv_prog_cc_pic='-KPIC'
      lt_cv_prog_cc_static='-Bstatic'
      lt_cv_prog_cc_wl='-Wl,'
      ;;

    sunos4*)
      lt_cv_prog_cc_pic='-PIC'
      lt_cv_prog_cc_static='-Bstatic'
      lt_cv_prog_cc_wl='-Qoption ld '
      ;;

    sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
      lt_cv_prog_cc_pic='-KPIC'
      lt_cv_prog_cc_static='-Bstatic'
      lt_cv_prog_cc_wl='-Wl,'
      ;;

    uts4*)
      lt_cv_prog_cc_pic='-pic'
      lt_cv_prog_cc_static='-Bstatic'
      ;;

    sysv4*MP*)
      if test -d /usr/nec ;then
	lt_cv_prog_cc_pic='-Kconform_pic'
	lt_cv_prog_cc_static='-Bstatic'
      fi
      ;;

    *)
      lt_cv_prog_cc_can_build_shared=no
      ;;
    esac
  fi
])
if test -z "$lt_cv_prog_cc_pic"; then
  AC_MSG_RESULT([none])
else
  AC_MSG_RESULT([$lt_cv_prog_cc_pic])

  # Check to make sure the pic_flag actually works.
  AC_MSG_CHECKING([if $compiler PIC flag $lt_cv_prog_cc_pic works])
  AC_CACHE_VAL(lt_cv_prog_cc_pic_works, [dnl
    save_CFLAGS="$CFLAGS"
    CFLAGS="$CFLAGS $lt_cv_prog_cc_pic -DPIC"
    AC_TRY_COMPILE([], [], [dnl
      case $host_os in
      hpux9* | hpux10* | hpux11*)
	# On HP-UX, both CC and GCC only warn that PIC is supported... then
	# they create non-PIC objects.  So, if there were any warnings, we
	# assume that PIC is not supported.
	if test -s conftest.err; then
	  lt_cv_prog_cc_pic_works=no
	else
	  lt_cv_prog_cc_pic_works=yes
	fi
	;;
      *)
	lt_cv_prog_cc_pic_works=yes
	;;
      esac
    ], [dnl
      lt_cv_prog_cc_pic_works=no
    ])
    CFLAGS="$save_CFLAGS"
  ])

  if test "X$lt_cv_prog_cc_pic_works" = Xno; then
    lt_cv_prog_cc_pic=
    lt_cv_prog_cc_can_build_shared=no
  else
    lt_cv_prog_cc_pic=" $lt_cv_prog_cc_pic"
  fi

  AC_MSG_RESULT([$lt_cv_prog_cc_pic_works])
fi

# Check for any special shared library compilation flags.
if test -n "$lt_cv_prog_cc_shlib"; then
  AC_MSG_WARN([\`$CC' requires \`$lt_cv_prog_cc_shlib' to build shared libraries])
  if echo "$old_CC $old_CFLAGS " | egrep -e "[[ 	]]$lt_cv_prog_cc_shlib[[ 	]]" >/dev/null; then :
  else
   AC_MSG_WARN([add \`$lt_cv_prog_cc_shlib' to the CC or CFLAGS env variable and reconfigure])
    lt_cv_prog_cc_can_build_shared=no
  fi
fi

AC_MSG_CHECKING([if $compiler static flag $lt_cv_prog_cc_static works])
AC_CACHE_VAL([lt_cv_prog_cc_static_works], [dnl
  lt_cv_prog_cc_static_works=no
  save_LDFLAGS="$LDFLAGS"
  LDFLAGS="$LDFLAGS $lt_cv_prog_cc_static"
  AC_TRY_LINK([], [], [lt_cv_prog_cc_static_works=yes])
  LDFLAGS="$save_LDFLAGS"
])

# Belt *and* braces to stop my trousers falling down:
test "X$lt_cv_prog_cc_static_works" = Xno && lt_cv_prog_cc_static=
AC_MSG_RESULT([$lt_cv_prog_cc_static_works])

pic_flag="$lt_cv_prog_cc_pic"
special_shlib_compile_flags="$lt_cv_prog_cc_shlib"
wl="$lt_cv_prog_cc_wl"
link_static_flag="$lt_cv_prog_cc_static"
no_builtin_flag="$lt_cv_prog_cc_no_builtin"
can_build_shared="$lt_cv_prog_cc_can_build_shared"


# Check to see if options -o and -c are simultaneously supported by compiler


AC_MSG_CHECKING([if $compiler supports -c -o file.$ac_objext])


AC_CACHE_VAL([lt_cv_compiler_c_o], [
$rm -r conftest 2>/dev/null
mkdir conftest
cd conftest
echo "int some_variable = 0;" > conftest.$ac_ext
mkdir out








# According to Tom Tromey, Ian Lance Taylor reported there are C compilers
# that will create temporary files in the current directory regardless of
# the output directory.  Thus, making CWD read-only will cause this test
# to fail, enabling locking or at least warning the user not to do parallel
# builds.
chmod -w .

save_CFLAGS="$CFLAGS"
CFLAGS="$CFLAGS -o out/conftest2.$ac_objext"

compiler_c_o=no
if { (eval echo configure:__oline__: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>out/conftest.err; } && test -s out/conftest2.$ac_objext; then
  # The compiler can only warn and ignore the option if not recognized
  # So say no if there are warnings
  if test -s out/conftest.err; then


    lt_cv_compiler_c_o=no
  else

    lt_cv_compiler_c_o=yes
  fi
else
  # Append any errors to the config.log.
  cat out/conftest.err 1>&AC_FD_CC
  lt_cv_compiler_c_o=no
fi
CFLAGS="$save_CFLAGS"


chmod u+w .
$rm conftest* out/*
rmdir out
cd ..
rmdir conftest
$rm -r conftest 2>/dev/null
])

compiler_c_o=$lt_cv_compiler_c_o
AC_MSG_RESULT([$compiler_c_o])

if test x"$compiler_c_o" = x"yes"; then
  # Check to see if we can write to a .lo
  AC_MSG_CHECKING([if $compiler supports -c -o file.lo])
  AC_CACHE_VAL([lt_cv_compiler_o_lo], [
  lt_cv_compiler_o_lo=no
  save_CFLAGS="$CFLAGS"
  CFLAGS="$CFLAGS -c -o conftest.lo"
  save_objext="$ac_objext"
  ac_objext=lo
  AC_TRY_COMPILE([], [int some_variable = 0;], [dnl
    # The compiler can only warn and ignore the option if not recognized
    # So say no if there are warnings
    if test -s conftest.err; then
      lt_cv_compiler_o_lo=no
    else
      lt_cv_compiler_o_lo=yes
    fi
  ])
  ac_objext="$save_objext"
  CFLAGS="$save_CFLAGS"
  ])
  compiler_o_lo=$lt_cv_compiler_o_lo
  AC_MSG_RESULT([$compiler_o_lo])
else
  compiler_o_lo=no
fi



# Check to see if we can do hard links to lock some files if needed



hard_links="nottested"
if test "$compiler_c_o" = no && test "$need_locks" != no; then
  # do not overwrite the value of need_locks provided by the user
  AC_MSG_CHECKING([if we can lock with hard links])
  hard_links=yes
  $rm conftest*
  ln conftest.a conftest.b 2>/dev/null && hard_links=no
  touch conftest.a
  ln conftest.a conftest.b 2>&5 || hard_links=no
  ln conftest.a conftest.b 2>/dev/null && hard_links=no
  AC_MSG_RESULT([$hard_links])
  if test "$hard_links" = no; then
    AC_MSG_WARN([\`$CC' does not support \`-c -o', so \`make -j' may be unsafe])
    need_locks=warn
  fi
else
  need_locks=no
fi


if test "$GCC" = yes; then
  # Check to see if options -fno-rtti -fno-exceptions are supported by compiler
  AC_MSG_CHECKING([if $compiler supports -fno-rtti -fno-exceptions])
  echo "int some_variable = 0;" > conftest.$ac_ext
  save_CFLAGS="$CFLAGS"
  CFLAGS="$CFLAGS -fno-rtti -fno-exceptions -c conftest.$ac_ext"
  compiler_rtti_exceptions=no
  AC_TRY_COMPILE([], [int some_variable = 0;], [dnl
    # The compiler can only warn and ignore the option if not recognized
    # So say no if there are warnings
    if test -s conftest.err; then
      compiler_rtti_exceptions=no
    else
      compiler_rtti_exceptions=yes
    fi
  ])
  CFLAGS="$save_CFLAGS"
  AC_MSG_RESULT([$compiler_rtti_exceptions])






  if test "$compiler_rtti_exceptions" = "yes"; then
    no_builtin_flag=' -fno-builtin -fno-rtti -fno-exceptions'
  else
    no_builtin_flag=' -fno-builtin'
  fi
fi

# See if the linker supports building shared libraries.
AC_MSG_CHECKING([whether the linker ($LD) supports shared libraries])

allow_undefined_flag=
no_undefined_flag=
need_lib_prefix=unknown
need_version=unknown
# when you set need_version to no, make sure it does not cause -set_version
# flags to be left without arguments
archive_cmds=
archive_expsym_cmds=
old_archive_from_new_cmds=
old_archive_from_expsyms_cmds=
export_dynamic_flag_spec=
whole_archive_flag_spec=
thread_safe_flag_spec=
hardcode_into_libs=no
hardcode_libdir_flag_spec=
hardcode_libdir_separator=
hardcode_direct=no
hardcode_minus_L=no
hardcode_shlibpath_var=unsupported
runpath_var=
link_all_deplibs=unknown
always_export_symbols=no
export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | sed '\''s/.* //'\'' | sort | uniq > $export_symbols'
# include_expsyms should be a list of space-separated symbols to be *always*
# included in the symbol list
include_expsyms=
# exclude_expsyms can be an egrep regular expression of symbols to exclude
# it will be wrapped by ` (' and `)$', so one must not match beginning or
# end of line.  Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
# as well as any symbol that contains `d'.
exclude_expsyms="_GLOBAL_OFFSET_TABLE_"
# Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
# platforms (ab)use it in PIC code, but their linkers get confused if
# the symbol is explicitly referenced.  Since portable code cannot
# rely on this symbol name, it's probably fine to never include it in
# preloaded symbol tables.
extract_expsyms_cmds=

case $host_os in
cygwin* | mingw* | pw32*)
  # FIXME: the MSVC++ port hasn't been tested in a loooong time
  # When not using gcc, we currently assume that we are using
  # Microsoft Visual C++.
  if test "$GCC" != yes; then
    with_gnu_ld=no
  fi
  ;;
openbsd*)
  with_gnu_ld=no
  ;;
esac

ld_shlibs=yes
if test "$with_gnu_ld" = yes; then
  # If archive_cmds runs LD, not CC, wlarc should be empty
  wlarc='${wl}'

  # See if GNU ld supports shared libraries.
  case $host_os in
  aix3* | aix4* | aix5*)
    # On AIX, the GNU linker is very broken
    # Note:Check GNU linker on AIX 5-IA64 when/if it becomes available.
    ld_shlibs=no
    cat <<EOF 1>&2

*** Warning: the GNU linker, at least up to release 2.9.1, is reported
*** to be unable to reliably create shared libraries on AIX.
*** Therefore, libtool is disabling shared libraries support.  If you
*** really care for shared libraries, you may want to modify your PATH
*** so that a non-GNU linker is found, and then restart.

EOF
    ;;

  amigaos*)
    archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
    hardcode_libdir_flag_spec='-L$libdir'
    hardcode_minus_L=yes

    # Samuel A. Falvo II <kc5tja@dolphin.openprojects.net> reports
    # that the semantics of dynamic libraries on AmigaOS, at least up
    # to version 4, is to share data among multiple programs linked
    # with the same dynamic library.  Since this doesn't match the
    # behavior of shared libraries on other platforms, we can use
    # them.
    ld_shlibs=no
    ;;

  beos*)
    if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
      allow_undefined_flag=unsupported
      # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
      # support --undefined.  This deserves some investigation.  FIXME
      archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
    else
      ld_shlibs=no
    fi
    ;;

  cygwin* | mingw* | pw32*)
    # hardcode_libdir_flag_spec is actually meaningless, as there is
    # no search path for DLLs.
    hardcode_libdir_flag_spec='-L$libdir'
    allow_undefined_flag=unsupported
    always_export_symbols=yes

    extract_expsyms_cmds='test -f $output_objdir/impgen.c || \
      sed -e "/^# \/\* impgen\.c starts here \*\//,/^# \/\* impgen.c ends here \*\// { s/^# //;s/^# *$//; p; }" -e d < $''0 > $output_objdir/impgen.c~
      test -f $output_objdir/impgen.exe || (cd $output_objdir && \
      if test "x$HOST_CC" != "x" ; then $HOST_CC -o impgen impgen.c ; \
      else $CC -o impgen impgen.c ; fi)~
      $output_objdir/impgen $dir/$soroot > $output_objdir/$soname-def'

    old_archive_from_expsyms_cmds='$DLLTOOL --as=$AS --dllname $soname --def $output_objdir/$soname-def --output-lib $output_objdir/$newlib'

    # cygwin and mingw dlls have different entry points and sets of symbols
    # to exclude.
    # FIXME: what about values for MSVC?
    dll_entry=__cygwin_dll_entry@12
    dll_exclude_symbols=DllMain@12,_cygwin_dll_entry@12,_cygwin_noncygwin_dll_entry@12~
    case $host_os in
    mingw*)
      # mingw values
      dll_entry=_DllMainCRTStartup@12
      dll_exclude_symbols=DllMain@12,DllMainCRTStartup@12,DllEntryPoint@12~
      ;;
    esac

    # mingw and cygwin differ, and it's simplest to just exclude the union
    # of the two symbol sets.
    dll_exclude_symbols=DllMain@12,_cygwin_dll_entry@12,_cygwin_noncygwin_dll_entry@12,DllMainCRTStartup@12,DllEntryPoint@12

    # recent cygwin and mingw systems supply a stub DllMain which the user
    # can override, but on older systems we have to supply one (in ltdll.c)
    if test "x$lt_cv_need_dllmain" = "xyes"; then
      ltdll_obj='$output_objdir/$soname-ltdll.'"$ac_objext "
      ltdll_cmds='test -f $output_objdir/$soname-ltdll.c || sed -e "/^# \/\* ltdll\.c starts here \*\//,/^# \/\* ltdll.c ends here \*\// { s/^# //; p; }" -e d < $''0 > $output_objdir/$soname-ltdll.c~
	test -f $output_objdir/$soname-ltdll.$ac_objext || (cd $output_objdir && $CC -c $soname-ltdll.c)~'
    else
      ltdll_obj=
      ltdll_cmds=
    fi

    # Extract the symbol export list from an `--export-all' def file,
    # then regenerate the def file from the symbol export list, so that
    # the compiled dll only exports the symbol export list.
    # Be careful not to strip the DATA tag left be newer dlltools.
    export_symbols_cmds="$ltdll_cmds"'
      $DLLTOOL --export-all --exclude-symbols '$dll_exclude_symbols' --output-def $output_objdir/$soname-def '$ltdll_obj'$libobjs $convenience~
      sed -e "1,/EXPORTS/d" -e "s/ @ [[0-9]]*//" -e "s/ *;.*$//" < $output_objdir/$soname-def > $export_symbols'

    # If the export-symbols file already is a .def file (1st line
    # is EXPORTS), use it as is.
    # If DATA tags from a recent dlltool are present, honour them!
    archive_expsym_cmds='if test "x`sed 1q $export_symbols`" = xEXPORTS; then
	cp $export_symbols $output_objdir/$soname-def;
      else
	echo EXPORTS > $output_objdir/$soname-def;
	_lt_hint=1;
	cat $export_symbols | while read symbol; do
	 set dummy \$symbol;
	 case \[$]# in
	   2) echo "   \[$]2 @ \$_lt_hint ; " >> $output_objdir/$soname-def;;
	   4) echo "   \[$]2 \[$]3 \[$]4 ; " >> $output_objdir/$soname-def; _lt_hint=`expr \$_lt_hint - 1`;;
	   *) echo "     \[$]2 @ \$_lt_hint \[$]3 ; " >> $output_objdir/$soname-def;;
	 esac;
	 _lt_hint=`expr 1 + \$_lt_hint`;
	done;
      fi~
      '"$ltdll_cmds"'
      $CC -Wl,--base-file,$output_objdir/$soname-base '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags~
      $DLLTOOL --as=$AS --dllname $soname --exclude-symbols '$dll_exclude_symbols' --def $output_objdir/$soname-def --base-file $output_objdir/$soname-base --output-exp $output_objdir/$soname-exp~
      $CC -Wl,--base-file,$output_objdir/$soname-base $output_objdir/$soname-exp '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags~
      $DLLTOOL --as=$AS --dllname $soname --exclude-symbols '$dll_exclude_symbols' --def $output_objdir/$soname-def --base-file $output_objdir/$soname-base --output-exp $output_objdir/$soname-exp --output-lib $output_objdir/$libname.dll.a~
      $CC $output_objdir/$soname-exp '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags'
    ;;

  netbsd*)
    if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
      archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
      wlarc=
    else
      archive_cmds='$CC -shared -nodefaultlibs $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
      archive_expsym_cmds='$CC -shared -nodefaultlibs $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
    fi
    ;;

  solaris* | sysv5*)
    if $LD -v 2>&1 | egrep 'BFD 2\.8' > /dev/null; then
      ld_shlibs=no
      cat <<EOF 1>&2

*** Warning: The releases 2.8.* of the GNU linker cannot reliably
*** create shared libraries on Solaris systems.  Therefore, libtool
*** is disabling shared libraries support.  We urge you to upgrade GNU
*** binutils to release 2.9.1 or newer.  Another option is to modify
*** your PATH or compiler configuration so that the native linker is
*** used, and then restart.

EOF
    elif $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
      archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
      archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
    else
      ld_shlibs=no
    fi
    ;;

  sunos4*)
    archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
    wlarc=
    hardcode_direct=yes
    hardcode_shlibpath_var=no
    ;;

  *)
    if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
      archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
      archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
    else
      ld_shlibs=no
    fi
    ;;
  esac

  if test "$ld_shlibs" = yes; then
    runpath_var=LD_RUN_PATH
    hardcode_libdir_flag_spec='${wl}--rpath ${wl}$libdir'
    export_dynamic_flag_spec='${wl}--export-dynamic'
    case $host_os in
    cygwin* | mingw* | pw32*)
      # dlltool doesn't understand --whole-archive et. al.
      whole_archive_flag_spec=
      ;;
    *)
      # ancient GNU ld didn't support --whole-archive et. al.
      if $LD --help 2>&1 | egrep 'no-whole-archive' > /dev/null; then
	whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
      else
	whole_archive_flag_spec=
      fi
      ;;
    esac
  fi
else
  # PORTME fill in a description of your system's linker (not GNU ld)
  case $host_os in
  aix3*)
    allow_undefined_flag=unsupported
    always_export_symbols=yes
    archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
    # Note: this linker hardcodes the directories in LIBPATH if there
    # are no directories specified by -L.
    hardcode_minus_L=yes
    if test "$GCC" = yes && test -z "$link_static_flag"; then
      # Neither direct hardcoding nor static linking is supported with a
      # broken collect2.
      hardcode_direct=unsupported
    fi
    ;;

  aix4* | aix5*)
    if test "$host_cpu" = ia64; then
      # On IA64, the linker does run time linking by default, so we don't
      # have to do anything special.
      aix_use_runtimelinking=no
      exp_sym_flag='-Bexport'
      no_entry_flag=""
    else
      aix_use_runtimelinking=no

      # Test if we are trying to use run time linking or normal
      # AIX style linking. If -brtl is somewhere in LDFLAGS, we
      # need to do runtime linking.
      case $host_os in aix4.[[23]]|aix4.[[23]].*|aix5*)
	for ld_flag in $LDFLAGS; do
	  case $ld_flag in
	  *-brtl*)
	    aix_use_runtimelinking=yes
	    break
	  ;;
	  esac
	done
      esac

      exp_sym_flag='-bexport'
      no_entry_flag='-bnoentry'
    fi

    # When large executables or shared objects are built, AIX ld can
    # have problems creating the table of contents.  If linking a library
    # or program results in "error TOC overflow" add -mminimal-toc to
    # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
    # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.

    hardcode_direct=yes
    archive_cmds=''
    hardcode_libdir_separator=':'
    if test "$GCC" = yes; then
      case $host_os in aix4.[[012]]|aix4.[[012]].*)
	collect2name=`${CC} -print-prog-name=collect2`
	if test -f "$collect2name" && \
	  strings "$collect2name" | grep resolve_lib_name >/dev/null
	then
	  # We have reworked collect2
	  hardcode_direct=yes
	else
	  # We have old collect2
	  hardcode_direct=unsupported
	  # It fails to find uninstalled libraries when the uninstalled
	  # path is not listed in the libpath.  Setting hardcode_minus_L
	  # to unsupported forces relinking
	  hardcode_minus_L=yes
	  hardcode_libdir_flag_spec='-L$libdir'
	  hardcode_libdir_separator=
	fi
      esac

      shared_flag='-shared'
    else
      # not using gcc
      if test "$host_cpu" = ia64; then
	shared_flag='${wl}-G'
      else
	if test "$aix_use_runtimelinking" = yes; then
	  shared_flag='${wl}-G'
	else
	  shared_flag='${wl}-bM:SRE'
	fi
      fi
    fi

    # It seems that -bexpall can do strange things, so it is better to
    # generate a list of symbols to export.
    always_export_symbols=yes
    if test "$aix_use_runtimelinking" = yes; then
      # Warning - without using the other runtime loading flags (-brtl),
      # -berok will link without error, but may produce a broken library.
      allow_undefined_flag='-berok'
      hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:/usr/lib:/lib'
      archive_expsym_cmds="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols $shared_flag"
    else
      if test "$host_cpu" = ia64; then
	hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib'
	allow_undefined_flag="-z nodefs"
	archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname ${wl}-h$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"
      else
	hardcode_libdir_flag_spec='${wl}-bnolibpath ${wl}-blibpath:$libdir:/usr/lib:/lib'
	# Warning - without using the other run time loading flags,
	# -berok will link without error, but may produce a broken library.
	allow_undefined_flag='${wl}-berok'
	# This is a bit strange, but is similar to how AIX traditionally builds
	# it's shared libraries.
	archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"' ~$AR -crlo $output_objdir/$libname$release.a $output_objdir/$soname'
      fi
    fi
    ;;

  amigaos*)
    archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
    hardcode_libdir_flag_spec='-L$libdir'
    hardcode_minus_L=yes
    # see comment about different semantics on the GNU ld section
    ld_shlibs=no
    ;;

  cygwin* | mingw* | pw32*)
    # When not using gcc, we currently assume that we are using
    # Microsoft Visual C++.
    # hardcode_libdir_flag_spec is actually meaningless, as there is
    # no search path for DLLs.
    hardcode_libdir_flag_spec=' '
    allow_undefined_flag=unsupported
    # Tell ltmain to make .lib files, not .a files.
    libext=lib
    # FIXME: Setting linknames here is a bad hack.
    archive_cmds='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | sed -e '\''s/ -lc$//'\''` -link -dll~linknames='
    # The linker will automatically build a .lib file if we build a DLL.
    old_archive_from_new_cmds='true'
    # FIXME: Should let the user specify the lib program.
    old_archive_cmds='lib /OUT:$oldlib$oldobjs$old_deplibs'
    fix_srcfile_path='`cygpath -w "$srcfile"`'
    ;;

  darwin* | rhapsody*)
    case "$host_os" in
    rhapsody* | darwin1.[[012]])
      allow_undefined_flag='-undefined suppress'
      ;;
    *) # Darwin 1.3 on
      allow_undefined_flag='-flat_namespace -undefined suppress'
      ;;
    esac
    # FIXME: Relying on posixy $() will cause problems for
    #        cross-compilation, but unfortunately the echo tests do not
    #        yet detect zsh echo's removal of \ escapes.  Also zsh mangles
    #	     `"' quotes if we put them in here... so don't!
    archive_cmds='$CC -r -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs && $CC $(test .$module = .yes && echo -bundle || echo -dynamiclib) $allow_undefined_flag -o $lib ${lib}-master.o $deplibs$linker_flags $(test .$module != .yes && echo -install_name $rpath/$soname $verstring)'
    # We need to add '_' to the symbols in $export_symbols first
    #archive_expsym_cmds="$archive_cmds"' && strip -s $export_symbols'
    hardcode_direct=yes
    hardcode_shlibpath_var=no
    whole_archive_flag_spec='-all_load $convenience'
    ;;

  freebsd1*)
    ld_shlibs=no
    ;;

  # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
  # support.  Future versions do this automatically, but an explicit c++rt0.o
  # does not break anything, and helps significantly (at the cost of a little
  # extra space).
  freebsd2.2*)
    archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
    hardcode_libdir_flag_spec='-R$libdir'
    hardcode_direct=yes
    hardcode_shlibpath_var=no
    ;;

  # Unfortunately, older versions of FreeBSD 2 do not have this feature.
  freebsd2*)
    archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
    hardcode_direct=yes
    hardcode_minus_L=yes
    hardcode_shlibpath_var=no
    ;;

  # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
  freebsd*)
    archive_cmds='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
    hardcode_libdir_flag_spec='-R$libdir'
    hardcode_direct=yes
    hardcode_shlibpath_var=no
    ;;

  hpux9* | hpux10* | hpux11*)
    case $host_os in
    hpux9*) archive_cmds='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' ;;
    *) archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' ;;
    esac
    hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
    hardcode_libdir_separator=:
    hardcode_direct=yes
    hardcode_minus_L=yes # Not in the search PATH, but as the default
			 # location of the library.
    export_dynamic_flag_spec='${wl}-E'
    ;;

  irix5* | irix6* | nonstopux*)
    if test "$GCC" = yes; then
      archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
      hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
    else
      archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
      hardcode_libdir_flag_spec='-rpath $libdir'
    fi
    hardcode_libdir_separator=:
    link_all_deplibs=yes
    ;;

  netbsd*)
    if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
      archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'  # a.out
    else
      archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags'      # ELF
    fi
    hardcode_libdir_flag_spec='-R$libdir'
    hardcode_direct=yes
    hardcode_shlibpath_var=no
    ;;

  newsos6)
    archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
    hardcode_direct=yes
    hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
    hardcode_libdir_separator=:
    hardcode_shlibpath_var=no
    ;;

  openbsd*)
    hardcode_direct=yes
    hardcode_shlibpath_var=no
    if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
      archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
      hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
      export_dynamic_flag_spec='${wl}-E'
    else
      case "$host_os" in
      openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*)
	archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
	hardcode_libdir_flag_spec='-R$libdir'
        ;;
      *)
        archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
        hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
        ;;
      esac
    fi
    ;;

  os2*)
    hardcode_libdir_flag_spec='-L$libdir'
    hardcode_minus_L=yes
    allow_undefined_flag=unsupported
    archive_cmds='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
    old_archive_from_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
    ;;

  osf3*)
    if test "$GCC" = yes; then
      allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
      archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
    else
      allow_undefined_flag=' -expect_unresolved \*'
      archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
    fi
    hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
    hardcode_libdir_separator=:
    ;;

  osf4* | osf5*)	# as osf3* with the addition of -msym flag
    if test "$GCC" = yes; then
      allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
      archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
      hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
    else
      allow_undefined_flag=' -expect_unresolved \*'
      archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
      archive_expsym_cmds='for i in `cat $export_symbols`; do printf "-exported_symbol " >> $lib.exp; echo "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~
      $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib~$rm $lib.exp'

      #Both c and cxx compiler support -rpath directly
      hardcode_libdir_flag_spec='-rpath $libdir'
    fi
    hardcode_libdir_separator=:
    ;;

  sco3.2v5*)
    archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
    hardcode_shlibpath_var=no
    runpath_var=LD_RUN_PATH
    hardcode_runpath_var=yes
    export_dynamic_flag_spec='${wl}-Bexport'
    ;;

  solaris*)
    # gcc --version < 3.0 without binutils cannot create self contained
    # shared libraries reliably, requiring libgcc.a to resolve some of
    # the object symbols generated in some cases.  Libraries that use
    # assert need libgcc.a to resolve __eprintf, for example.  Linking
    # a copy of libgcc.a into every shared library to guarantee resolving
    # such symbols causes other problems:  According to Tim Van Holder
    # <tim.van.holder@pandora.be>, C++ libraries end up with a separate
    # (to the application) exception stack for one thing.
    no_undefined_flag=' -z defs'
    if test "$GCC" = yes; then
      case `$CC --version 2>/dev/null` in
      [[12]].*)
	cat <<EOF 1>&2

*** Warning: Releases of GCC earlier than version 3.0 cannot reliably
*** create self contained shared libraries on Solaris systems, without
*** introducing a dependency on libgcc.a.  Therefore, libtool is disabling
*** -no-undefined support, which will at least allow you to build shared
*** libraries.  However, you may find that when you link such libraries
*** into an application without using GCC, you have to manually add
*** \`gcc --print-libgcc-file-name\` to the link command.  We urge you to
*** upgrade to a newer version of GCC.  Another option is to rebuild your
*** current GCC to use the GNU linker from GNU binutils 2.9.1 or newer.

EOF
        no_undefined_flag=
	;;
      esac
    fi
    # $CC -shared without GNU ld will not create a library from C++
    # object files and a static libstdc++, better avoid it by now
    archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
    archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
		$LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
    hardcode_libdir_flag_spec='-R$libdir'
    hardcode_shlibpath_var=no
    case $host_os in
    solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
    *) # Supported since Solaris 2.6 (maybe 2.5.1?)
      whole_archive_flag_spec='-z allextract$convenience -z defaultextract' ;;
    esac
    link_all_deplibs=yes
    ;;

  sunos4*)
    if test "x$host_vendor" = xsequent; then
      # Use $CC to link under sequent, because it throws in some extra .o
      # files that make .init and .fini sections work.
      archive_cmds='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
    else
      archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
    fi
    hardcode_libdir_flag_spec='-L$libdir'
    hardcode_direct=yes
    hardcode_minus_L=yes
    hardcode_shlibpath_var=no
    ;;

  sysv4)
    case $host_vendor in
      sni)
        archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
        hardcode_direct=yes # is this really true???
        ;;
      siemens)
        ## LD is ld it makes a PLAMLIB
        ## CC just makes a GrossModule.
        archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags'
        reload_cmds='$CC -r -o $output$reload_objs'
        hardcode_direct=no
        ;;
      motorola)
        archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
        hardcode_direct=no #Motorola manual says yes, but my tests say they lie
        ;;
    esac
    runpath_var='LD_RUN_PATH'
    hardcode_shlibpath_var=no
    ;;

  sysv4.3*)
    archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
    hardcode_shlibpath_var=no
    export_dynamic_flag_spec='-Bexport'
    ;;

  sysv5*)
    no_undefined_flag=' -z text'
    # $CC -shared without GNU ld will not create a library from C++
    # object files and a static libstdc++, better avoid it by now
    archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
    archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
		$LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
    hardcode_libdir_flag_spec=
    hardcode_shlibpath_var=no
    runpath_var='LD_RUN_PATH'
    ;;

  uts4*)
    archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
    hardcode_libdir_flag_spec='-L$libdir'
    hardcode_shlibpath_var=no
    ;;

  dgux*)
    archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
    hardcode_libdir_flag_spec='-L$libdir'
    hardcode_shlibpath_var=no
    ;;

  sysv4*MP*)
    if test -d /usr/nec; then

      archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
      hardcode_shlibpath_var=no
      runpath_var=LD_RUN_PATH
      hardcode_runpath_var=yes
      ld_shlibs=yes
    fi
    ;;

  sysv4.2uw2*)
    archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags'
    hardcode_direct=yes
    hardcode_minus_L=no
    hardcode_shlibpath_var=no
    hardcode_runpath_var=yes
    runpath_var=LD_RUN_PATH
    ;;

  sysv5uw7* | unixware7*)
    no_undefined_flag='${wl}-z ${wl}text'
    if test "$GCC" = yes; then
      archive_cmds='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
    else


      archive_cmds='$CC -G ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
    fi



    runpath_var='LD_RUN_PATH'
    hardcode_shlibpath_var=no
    ;;

  *)
    ld_shlibs=no
    ;;
  esac
fi
AC_MSG_RESULT([$ld_shlibs])
test "$ld_shlibs" = no && can_build_shared=no



# Check hardcoding attributes.

AC_MSG_CHECKING([how to hardcode library paths into programs])
hardcode_action=
if test -n "$hardcode_libdir_flag_spec" || \

   test -n "$runpath_var"; then

  # We can hardcode non-existant directories.

  if test "$hardcode_direct" != no &&
     # If the only mechanism to avoid hardcoding is shlibpath_var, we
     # have to relink, otherwise we might link with an installed library
     # when we should be linking with a yet-to-be-installed one
     ## test "$hardcode_shlibpath_var" != no &&
     test "$hardcode_minus_L" != no; then
    # Linking always hardcodes the temporary library directory.
    hardcode_action=relink
  else
    # We can link without hardcoding, and we can hardcode nonexisting dirs.
    hardcode_action=immediate
  fi
else
  # We cannot hardcode anything, or else we can only hardcode existing
  # directories.
  hardcode_action=unsupported
fi
AC_MSG_RESULT([$hardcode_action])















striplib=
old_striplib=
AC_MSG_CHECKING([whether stripping libraries is possible])
if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then
  test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
  test -z "$striplib" && striplib="$STRIP --strip-unneeded"
  AC_MSG_RESULT([yes])
else
  AC_MSG_RESULT([no])
fi


reload_cmds='$LD$reload_flag -o $output$reload_objs'
test -z "$deplibs_check_method" && deplibs_check_method=unknown



# PORTME Fill in your ld.so characteristics

AC_MSG_CHECKING([dynamic linker characteristics])
library_names_spec=
libname_spec='lib$name'
soname_spec=
postinstall_cmds=
postuninstall_cmds=
finish_cmds=
finish_eval=
shlibpath_var=
shlibpath_overrides_runpath=unknown
version_type=none
dynamic_linker="$host_os ld.so"
sys_lib_dlsearch_path_spec="/lib /usr/lib"
sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"







case $host_os in
aix3*)
  version_type=linux
  library_names_spec='${libname}${release}.so$versuffix $libname.a'
  shlibpath_var=LIBPATH

  # AIX has no versioning support, so we append a major version to the name.
  soname_spec='${libname}${release}.so$major'
  ;;

aix4* | aix5*)
  version_type=linux
  need_lib_prefix=no
  need_version=no
  hardcode_into_libs=yes
  if test "$host_cpu" = ia64; then
    # AIX 5 supports IA64
    library_names_spec='${libname}${release}.so$major ${libname}${release}.so$versuffix $libname.so'
    shlibpath_var=LD_LIBRARY_PATH
  else
    # With GCC up to 2.95.x, collect2 would create an import file
    # for dependence libraries.  The import file would start with
    # the line `#! .'.  This would cause the generated library to
    # depend on `.', always an invalid library.  This was fixed in
    # development snapshots of GCC prior to 3.0.
    case $host_os in
      aix4 | aix4.[[01]] | aix4.[[01]].*)
	if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
	     echo ' yes '
	     echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then
	  :
	else
	  can_build_shared=no
	fi
	;;
    esac
    # AIX (on Power*) has no versioning support, so currently we can
    # not hardcode correct soname into executable. Probably we can
    # add versioning support to collect2, so additional links can
    # be useful in future.
    if test "$aix_use_runtimelinking" = yes; then
      # If using run time linking (on AIX 4.2 or later) use lib<name>.so
      # instead of lib<name>.a to let people know that these are not
      # typical AIX shared libraries.
      library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
    else
      # We preserve .a as extension for shared libraries through AIX4.2
      # and later when we are not doing run time linking.
      library_names_spec='${libname}${release}.a $libname.a'
      soname_spec='${libname}${release}.so$major'
    fi
    shlibpath_var=LIBPATH

  fi
  hardcode_into_libs=yes
  ;;

amigaos*)
  library_names_spec='$libname.ixlibrary $libname.a'
  # Create ${libname}_ixlibrary.a entries in /sys/libs.
  finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "(cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a)"; (cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a) || exit 1; done'
  ;;

beos*)
  library_names_spec='${libname}.so'
  dynamic_linker="$host_os ld.so"
  shlibpath_var=LIBRARY_PATH
  ;;
................................................................................
  need_version=no
  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
  soname_spec='${libname}${release}.so$major'
  finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
  shlibpath_var=LD_LIBRARY_PATH
  sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
  sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
  export_dynamic_flag_spec=-rdynamic
  # the default ld.so.conf also contains /usr/contrib/lib and
  # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
  # libtool to hard-code these into programs
  ;;

cygwin* | mingw* | pw32*)
  version_type=windows
  need_version=no
  need_lib_prefix=no
  case $GCC,$host_os in
  yes,cygwin*)
    library_names_spec='$libname.dll.a'

    soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | sed -e 's/[[.]]/-/g'`${versuffix}.dll'
    postinstall_cmds='dlpath=`bash 2>&1 -c '\''. $dir/${file}i;echo \$dlname'\''`~
      dldir=$destdir/`dirname \$dlpath`~
      test -d \$dldir || mkdir -p \$dldir~
      $install_prog .libs/$dlname \$dldir/$dlname'
    postuninstall_cmds='dldll=`bash 2>&1 -c '\''. $file; echo \$dlname'\''`~
      dlpath=$dir/\$dldll~
       $rm \$dlpath'
    ;;
  yes,mingw*)
    library_names_spec='${libname}`echo ${release} | sed -e 's/[[.]]/-/g'`${versuffix}.dll'
    sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | sed -e "s/^libraries://" -e "s/;/ /g" -e "s,=/,/,g"`
    ;;
  yes,pw32*)
    library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | sed -e 's/[.]/-/g'`${versuffix}.dll'
    ;;
  *)
    library_names_spec='${libname}`echo ${release} | sed -e 's/[[.]]/-/g'`${versuffix}.dll $libname.lib'
    ;;
  esac
  dynamic_linker='Win32 ld.exe'
  # FIXME: first we should search . and the directory the executable is in
  shlibpath_var=PATH
  ;;

................................................................................
  #        yet detect zsh echo's removal of \ escapes.
  library_names_spec='${libname}${release}${versuffix}.$(test .$module = .yes && echo so || echo dylib) ${libname}${release}${major}.$(test .$module = .yes && echo so || echo dylib) ${libname}.$(test .$module = .yes && echo so || echo dylib)'
  soname_spec='${libname}${release}${major}.$(test .$module = .yes && echo so || echo dylib)'
  shlibpath_overrides_runpath=yes
  shlibpath_var=DYLD_LIBRARY_PATH
  ;;

freebsd1*)
  dynamic_linker=no
  ;;

freebsd*-gnu*)
  version_type=linux
  need_lib_prefix=no
  need_version=no
  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
  soname_spec='${libname}${release}.so$major'
  shlibpath_var=LD_LIBRARY_PATH
  shlibpath_overrides_runpath=no
  hardcode_into_libs=yes
  dynamic_linker='GNU/FreeBSD ld.so'

  ;;

freebsd*)
  objformat=`test -x /usr/bin/objformat && /usr/bin/objformat || echo aout`
  version_type=freebsd-$objformat
  case $version_type in
    freebsd-elf*)
................................................................................
      ;;
  esac
  shlibpath_var=LD_LIBRARY_PATH
  case $host_os in
  freebsd2*)
    shlibpath_overrides_runpath=yes
    ;;
  *)




    shlibpath_overrides_runpath=no
    hardcode_into_libs=yes
    ;;
  esac
  ;;

gnu*)
................................................................................
  shlibpath_var=LD_LIBRARY_PATH
  hardcode_into_libs=yes
  ;;

hpux9* | hpux10* | hpux11*)
  # Give a soname corresponding to the major version so that dld.sl refuses to
  # link against other versions.
  dynamic_linker="$host_os dld.sl"
  version_type=sunos
  need_lib_prefix=no
  need_version=no















  shlibpath_var=SHLIB_PATH
  shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
  library_names_spec='${libname}${release}.sl$versuffix ${libname}${release}.sl$major $libname.sl'
  soname_spec='${libname}${release}.sl$major'

  # HP-UX runs *really* slowly unless shared libraries are mode 555.
  postinstall_cmds='chmod 555 $lib'
  ;;

irix5* | irix6* | nonstopux*)
  case $host_os in
    nonstopux*) version_type=nonstopux ;;
    *)          version_type=irix ;;
  esac
  need_lib_prefix=no
  need_version=no
  soname_spec='${libname}${release}.so$major'
  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major ${libname}${release}.so $libname.so'
  case $host_os in
  irix5* | nonstopux*)
    libsuff= shlibsuff=
    ;;
  *)
    case $LD in # libtool.m4 will add one of these switches to LD
    *-32|*"-32 ") libsuff= shlibsuff= libmagic=32-bit;;
    *-n32|*"-n32 ") libsuff=32 shlibsuff=N32 libmagic=N32;;
    *-64|*"-64 ") libsuff=64 shlibsuff=64 libmagic=64-bit;;
................................................................................
  shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
  shlibpath_overrides_runpath=no
  sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
  sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
  ;;

# No shared lib support for Linux oldld, aout, or coff.
linux-gnuoldld* | linux-gnuaout* | linux-gnucoff*)
  dynamic_linker=no
  ;;

# This must be Linux ELF.
linux-gnu*)
  version_type=linux
  need_lib_prefix=no
  need_version=no
  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
  soname_spec='${libname}${release}.so$major'
  finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
  shlibpath_var=LD_LIBRARY_PATH
................................................................................
newsos6)
  version_type=linux
  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
  shlibpath_var=LD_LIBRARY_PATH
  shlibpath_overrides_runpath=yes
  ;;

openbsd*)
  version_type=sunos
  need_lib_prefix=no
  need_version=no
  if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
    case "$host_os" in
    openbsd2.[[89]] | openbsd2.[[89]].*)
      shlibpath_overrides_runpath=no
      ;;
    *)
      shlibpath_overrides_runpath=yes
      ;;
    esac
  else
    shlibpath_overrides_runpath=yes
  fi
  library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix'
  finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
  shlibpath_var=LD_LIBRARY_PATH



  ;;

os2*)
  libname_spec='$name'
  need_lib_prefix=no
  library_names_spec='$libname.dll $libname.a'
  dynamic_linker='OS/2 ld.exe'
  shlibpath_var=LIBPATH
  ;;

osf3* | osf4* | osf5*)
  version_type=osf
  need_version=no
  need_lib_prefix=no
  soname_spec='${libname}${release}.so$major'
  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
  shlibpath_var=LD_LIBRARY_PATH
  sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
  sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
  hardcode_into_libs=yes
  ;;

sco3.2v5*)
  version_type=osf
  soname_spec='${libname}${release}.so$major'
  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
  shlibpath_var=LD_LIBRARY_PATH
................................................................................
  version_type=linux
  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
  soname_spec='${libname}${release}.so$major'
  shlibpath_var=LD_LIBRARY_PATH
  case $host_vendor in
    sni)
      shlibpath_overrides_runpath=no
      need_lib_prefix=no
      export_dynamic_flag_spec='${wl}-Blargedynsym'
      runpath_var=LD_RUN_PATH
      ;;
    siemens)
      need_lib_prefix=no
      ;;
    motorola)
      need_lib_prefix=no
      need_version=no
      shlibpath_overrides_runpath=no
      sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
      ;;
  esac
  ;;

uts4*)
  version_type=linux
  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
  soname_spec='${libname}${release}.so$major'
  shlibpath_var=LD_LIBRARY_PATH
  ;;

dgux*)
  version_type=linux
  need_lib_prefix=no
  need_version=no
  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
  soname_spec='${libname}${release}.so$major'
  shlibpath_var=LD_LIBRARY_PATH
  ;;

sysv4*MP*)
  if test -d /usr/nec ;then
    version_type=linux
    library_names_spec='$libname.so.$versuffix $libname.so.$major $libname.so'
    soname_spec='$libname.so.$major'
    shlibpath_var=LD_LIBRARY_PATH
  fi
  ;;








*)
  dynamic_linker=no
  ;;
esac
AC_MSG_RESULT([$dynamic_linker])
test "$dynamic_linker" = no && can_build_shared=no
































































































































































































































































































































































































































































































































































































































































































































































































































































# Report the final consequences.
AC_MSG_CHECKING([if libtool supports shared libraries])
AC_MSG_RESULT([$can_build_shared])

AC_MSG_CHECKING([whether to build shared libraries])
test "$can_build_shared" = "no" && enable_shared=no

# On AIX, shared libraries and static libraries use the same namespace, and
................................................................................
  if test -n "$RANLIB"; then
    archive_cmds="$archive_cmds~\$RANLIB \$lib"
    postinstall_cmds='$RANLIB $lib'
  fi
  ;;

aix4*)
  if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
    test "$enable_shared" = yes && enable_static=no
  fi
  ;;
esac
AC_MSG_RESULT([$enable_shared])

AC_MSG_CHECKING([whether to build static libraries])
# Make sure either enable_shared or enable_static is yes.
test "$enable_shared" = yes || enable_static=yes
AC_MSG_RESULT([$enable_static])

if test "$hardcode_action" = relink; then
  # Fast installation is not supported
  enable_fast_install=no
elif test "$shlibpath_overrides_runpath" = yes ||
     test "$enable_shared" = no; then
  # Fast installation is not necessary
  enable_fast_install=needless
fi

variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
if test "$GCC" = yes; then
  variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
fi

AC_LIBTOOL_DLOPEN_SELF

if test "$enable_shared" = yes && test "$GCC" = yes; then
  case $archive_cmds in
  *'~'*)
    # FIXME: we may have to deal with multi-command sequences.
    ;;
  '$CC '*)
    # Test whether the compiler implicitly links with -lc since on some
    # systems, -lgcc has to come before -lc. If gcc already passes -lc
    # to ld, don't add -lc before -lgcc.
    AC_MSG_CHECKING([whether -lc should be explicitly linked in])
    AC_CACHE_VAL([lt_cv_archive_cmds_need_lc],
    [$rm conftest*
    echo 'static int dummy;' > conftest.$ac_ext

    if AC_TRY_EVAL(ac_compile); then
      soname=conftest
      lib=conftest
      libobjs=conftest.$ac_objext
      deplibs=
      wl=$lt_cv_prog_cc_wl
      compiler_flags=-v
      linker_flags=-v
      verstring=
      output_objdir=.
      libname=conftest
      save_allow_undefined_flag=$allow_undefined_flag
      allow_undefined_flag=
      if AC_TRY_EVAL(archive_cmds 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1)
      then
	lt_cv_archive_cmds_need_lc=no
      else
	lt_cv_archive_cmds_need_lc=yes
      fi
      allow_undefined_flag=$save_allow_undefined_flag
    else
      cat conftest.err 1>&5
    fi])
    AC_MSG_RESULT([$lt_cv_archive_cmds_need_lc])
    ;;
  esac
fi
need_lc=${lt_cv_archive_cmds_need_lc-yes}

# The second clause should only fire when bootstrapping the
# libtool distribution, otherwise you forgot to ship ltmain.sh
# with your package, and you will get complaints that there are
# no rules to generate ltmain.sh.
if test -f "$ltmain"; then
  :
else
  # If there is no Makefile yet, we rely on a make rule to execute
  # `config.status --recheck' to rerun these tests and create the
  # libtool script then.
  test -f Makefile && make "$ltmain"
fi

if test -f "$ltmain"; then
  trap "$rm \"${ofile}T\"; exit 1" 1 2 15
  $rm -f "${ofile}T"

  echo creating $ofile

  # Now quote all the things that may contain metacharacters while being
  # careful not to overquote the AC_SUBSTed values.  We take copies of the
  # variables and quote the copies for generation of the libtool script.
  for var in echo old_CC old_CFLAGS SED \
    AR AR_FLAGS CC LD LN_S NM SHELL \
    reload_flag reload_cmds wl \
    pic_flag link_static_flag no_builtin_flag export_dynamic_flag_spec \
    thread_safe_flag_spec whole_archive_flag_spec libname_spec \
    library_names_spec soname_spec \
    RANLIB old_archive_cmds old_archive_from_new_cmds old_postinstall_cmds \
    old_postuninstall_cmds archive_cmds archive_expsym_cmds postinstall_cmds \
    postuninstall_cmds extract_expsyms_cmds old_archive_from_expsyms_cmds \
    old_striplib striplib file_magic_cmd export_symbols_cmds \
    deplibs_check_method allow_undefined_flag no_undefined_flag \
    finish_cmds finish_eval global_symbol_pipe global_symbol_to_cdecl \
    global_symbol_to_c_name_address \
    hardcode_libdir_flag_spec hardcode_libdir_separator  \
    sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
    compiler_c_o compiler_o_lo need_locks exclude_expsyms include_expsyms; do

    case $var in
    reload_cmds | old_archive_cmds | old_archive_from_new_cmds | \
    old_postinstall_cmds | old_postuninstall_cmds | \
    export_symbols_cmds | archive_cmds | archive_expsym_cmds | \
    extract_expsyms_cmds | old_archive_from_expsyms_cmds | \
    postinstall_cmds | postuninstall_cmds | \
    finish_cmds | sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)









































































































































































































































































































































































































































































































































































































































































































































































































































































      # Double-quote double-evaled strings.
      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
      ;;
    *)
      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
      ;;
    esac
  done














  cat <<__EOF__ > "${ofile}T"

#! $SHELL

# `$echo "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
# Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP)
# NOTE: Changes made to this file will be lost: look at ltmain.sh.
#

# Copyright (C) 1996-2000 Free Software Foundation, Inc.


# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
................................................................................
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
#
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
# configuration script generated by Autoconf, you may include it under
# the same distribution terms that you use for the rest of that program.

# A sed that does not truncate output.
SED=$lt_SED

# Sed that helps us avoid accidentally triggering echo(1) options like -n.
Xsed="${SED} -e s/^X//"

# The HP-UX ksh and POSIX shell print the target directory to stdout
# if CDPATH is set.
if test "X\${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi




# ### BEGIN LIBTOOL CONFIG


# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:

# Shell to use when invoking shell scripts.
SHELL=$lt_SHELL

# Whether or not to build shared libraries.
build_libtool_libs=$enable_shared

# Whether or not to build static libraries.
build_old_libs=$enable_static

# Whether or not to add -lc for building shared libraries.
build_libtool_need_lc=$need_lc

# Whether or not to optimize for fast installation.
fast_install=$enable_fast_install

# The host system.
host_alias=$host_alias
host=$host
................................................................................
# An echo program that does not interpret backslashes.
echo=$lt_echo

# The archiver.
AR=$lt_AR
AR_FLAGS=$lt_AR_FLAGS

# The default C compiler.
CC=$lt_CC




# Is the compiler the GNU C compiler?
with_gcc=$GCC

# The linker used to build libraries.
LD=$lt_LD

# Whether we need hard or soft links.
LN_S=$lt_LN_S

# A BSD-compatible nm program.
NM=$lt_NM

................................................................................
objdir=$objdir

# How to create reloadable object files.
reload_flag=$lt_reload_flag
reload_cmds=$lt_reload_cmds

# How to pass a linker flag through the compiler.
wl=$lt_wl

# Object file suffix (normally "o").
objext="$ac_objext"

# Old archive suffix (normally "a").
libext="$libext"

# Executable file suffix (normally "").
exeext="$exeext"

# Additional compiler flags for building library objects.
pic_flag=$lt_pic_flag
pic_mode=$pic_mode

# Does compiler simultaneously support -c and -o options?
compiler_c_o=$lt_compiler_c_o

# Can we write directly to a .lo ?
compiler_o_lo=$lt_compiler_o_lo

# Must we lock files when doing compilation ?
need_locks=$lt_need_locks

# Do we need the lib prefix for modules?
need_lib_prefix=$need_lib_prefix

................................................................................
# Whether dlopen of programs is supported.
dlopen_self=$enable_dlopen_self

# Whether dlopen of statically linked programs is supported.
dlopen_self_static=$enable_dlopen_self_static

# Compiler flag to prevent dynamic linking.
link_static_flag=$lt_link_static_flag

# Compiler flag to turn off builtin functions.
no_builtin_flag=$lt_no_builtin_flag

# Compiler flag to allow reflexive dlopens.
export_dynamic_flag_spec=$lt_export_dynamic_flag_spec

# Compiler flag to generate shared objects directly from archives.
whole_archive_flag_spec=$lt_whole_archive_flag_spec

# Compiler flag to generate thread-safe objects.
thread_safe_flag_spec=$lt_thread_safe_flag_spec

# Library versioning type.
version_type=$version_type

# Format of library name prefix.
libname_spec=$lt_libname_spec

................................................................................
library_names_spec=$lt_library_names_spec

# The coded name of the library, if different from the real name.
soname_spec=$lt_soname_spec

# Commands used to build and install an old-style archive.
RANLIB=$lt_RANLIB
old_archive_cmds=$lt_old_archive_cmds
old_postinstall_cmds=$lt_old_postinstall_cmds
old_postuninstall_cmds=$lt_old_postuninstall_cmds

# Create an old-style archive from a shared archive.
old_archive_from_new_cmds=$lt_old_archive_from_new_cmds

# Create a temporary old-style archive to link instead of a shared archive.
old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds

# Commands used to build and install a shared archive.
archive_cmds=$lt_archive_cmds
archive_expsym_cmds=$lt_archive_expsym_cmds
postinstall_cmds=$lt_postinstall_cmds
postuninstall_cmds=$lt_postuninstall_cmds

# Commands to strip libraries.
old_striplib=$lt_old_striplib
striplib=$lt_striplib





















# Method to check whether dependent libraries are shared objects.
deplibs_check_method=$lt_deplibs_check_method

# Command to use when deplibs_check_method == file_magic.
file_magic_cmd=$lt_file_magic_cmd

# Flag that allows shared libraries with undefined symbols to be built.
allow_undefined_flag=$lt_allow_undefined_flag

# Flag that forces no undefined symbols.
no_undefined_flag=$lt_no_undefined_flag

# Commands used to finish a libtool library installation in a directory.
finish_cmds=$lt_finish_cmds

# Same as above, but a single script fragment to be evaled but not shown.
finish_eval=$lt_finish_eval

# Take the output of nm and produce a listing of raw symbols and C names.
global_symbol_pipe=$lt_global_symbol_pipe

# Transform the output of nm in a proper C declaration
global_symbol_to_cdecl=$lt_global_symbol_to_cdecl

# Transform the output of nm in a C name address pair
global_symbol_to_c_name_address=$lt_global_symbol_to_c_name_address

# This is the shared library runtime path variable.
runpath_var=$runpath_var

# This is the shared library path variable.
shlibpath_var=$shlibpath_var

# Is shlibpath searched before the hard-coded library search path?
shlibpath_overrides_runpath=$shlibpath_overrides_runpath

# How to hardcode a shared library path into an executable.
hardcode_action=$hardcode_action

# Whether we should hardcode library paths into libraries.
hardcode_into_libs=$hardcode_into_libs

# Flag to hardcode \$libdir into a binary during linking.
# This must work even if \$libdir does not exist.
hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec

# Whether we need a single -rpath flag with a separated argument.
hardcode_libdir_separator=$lt_hardcode_libdir_separator

# Set to yes if using DIR/libNAME.so during linking hardcodes DIR into the
# resulting binary.
hardcode_direct=$hardcode_direct

# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
# resulting binary.
hardcode_minus_L=$hardcode_minus_L

# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
# the resulting binary.
hardcode_shlibpath_var=$hardcode_shlibpath_var

# Variables whose values should be saved in libtool wrapper scripts and
# restored at relink time.
variables_saved_for_relink="$variables_saved_for_relink"

# Whether libtool must link a program against all its dependency libraries.
link_all_deplibs=$link_all_deplibs

# Compile-time system search path for libraries
sys_lib_search_path_spec=$lt_sys_lib_search_path_spec

# Run-time system search path for libraries
sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec

# Fix the shell variable \$srcfile for the compiler.
fix_srcfile_path="$fix_srcfile_path"

# Set to yes if exported symbols are required.
always_export_symbols=$always_export_symbols

# The commands to list exported symbols.
export_symbols_cmds=$lt_export_symbols_cmds

# The commands to extract the exported symbol list from a shared archive.
extract_expsyms_cmds=$lt_extract_expsyms_cmds

# Symbols that should not be listed in the preloaded symbols.
exclude_expsyms=$lt_exclude_expsyms

# Symbols that must always be exported.
include_expsyms=$lt_include_expsyms


# ### END LIBTOOL CONFIG


__EOF__


  case $host_os in
  aix3*)
    cat <<\EOF >> "${ofile}T"

# AIX sometimes has problems with the GCC collect2 program.  For some
# reason, if we set the COLLECT_NAMES environment variable, the problems
# vanish in a puff of smoke.
if test "X${COLLECT_NAMES+set}" != Xset; then
  COLLECT_NAMES=
  export COLLECT_NAMES
fi
EOF
    ;;
  esac

  case $host_os in
  cygwin* | mingw* | pw32* | os2*)
    cat <<'EOF' >> "${ofile}T"
      # This is a source program that is used to create dlls on Windows
      # Don't remove nor modify the starting and closing comments



























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































# /* ltdll.c starts here */
# #define WIN32_LEAN_AND_MEAN
# #include <windows.h>
# #undef WIN32_LEAN_AND_MEAN
# #include <stdio.h>
#
# #ifndef __CYGWIN__
# #  ifdef __CYGWIN32__
................................................................................
# BOOL APIENTRY
# DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved)
# {
#   __hDllInstance_base = hInst;
#   return TRUE;
# }
# /* ltdll.c ends here */
	# This is a source program that is used to create import libraries





	# on Windows for dlls which lack them. Don't remove nor modify the
	# starting and closing comments
# /* impgen.c starts here */
# /*   Copyright (C) 1999-2000 Free Software Foundation, Inc.
#
#  This file is part of GNU libtool.
#
#  This program is free software; you can redistribute it and/or modify
#  it under the terms of the GNU General Public License as published by
#  the Free Software Foundation; either version 2 of the License, or
#  (at your option) any later version.
................................................................................
# 	unsigned long name_rva = pe_as32 (erva+name_rvas+i*4);
# 	printf ("\t%s @ %ld ;\n", erva+name_rva, 1+ i);
#     }
#
#     return 0;
# }
# /* impgen.c ends here */

EOF
    ;;
  esac

  # We use sed instead of cat because bash on DJGPP gets confused if
  # if finds mixed CR/LF and LF-only lines.  Since sed operates in
  # text mode, it properly converts lines to CR/LF.  This bash problem
  # is reportedly fixed, but why not run on old versions too?
  sed '$q' "$ltmain" >> "${ofile}T" || (rm -f "${ofile}T"; exit 1)

  mv -f "${ofile}T" "$ofile" || \
    (rm -f "$ofile" && cp "${ofile}T" "$ofile" && rm -f "${ofile}T")
  chmod +x "$ofile"
fi

])# _LT_AC_LTCONFIG_HACK




# AC_LIBTOOL_DLOPEN - enable checks for dlopen support
AC_DEFUN([AC_LIBTOOL_DLOPEN], [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])])

# AC_LIBTOOL_WIN32_DLL - declare package support for building win32 dll's
AC_DEFUN([AC_LIBTOOL_WIN32_DLL], [AC_BEFORE([$0], [AC_LIBTOOL_SETUP])])

# AC_ENABLE_SHARED - implement the --enable-shared flag
# Usage: AC_ENABLE_SHARED[(DEFAULT)]
#   Where DEFAULT is either `yes' or `no'.  If omitted, it defaults to
#   `yes'.
AC_DEFUN([AC_ENABLE_SHARED],
[define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl
AC_ARG_ENABLE(shared,
changequote(<<, >>)dnl
<<  --enable-shared[=PKGS]  build shared libraries [default=>>AC_ENABLE_SHARED_DEFAULT],
changequote([, ])dnl
[p=${PACKAGE-default}
case $enableval in
yes) enable_shared=yes ;;
no) enable_shared=no ;;
*)
  enable_shared=no
  # Look at the argument we got.  We use all the common list separators.
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
  for pkg in $enableval; do
    if test "X$pkg" = "X$p"; then
      enable_shared=yes
    fi
  done
  IFS="$ac_save_ifs"
  ;;
esac],
enable_shared=AC_ENABLE_SHARED_DEFAULT)dnl
])

# AC_DISABLE_SHARED - set the default shared flag to --disable-shared
AC_DEFUN([AC_DISABLE_SHARED],
[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
AC_ENABLE_SHARED(no)])

# AC_ENABLE_STATIC - implement the --enable-static flag
# Usage: AC_ENABLE_STATIC[(DEFAULT)]
#   Where DEFAULT is either `yes' or `no'.  If omitted, it defaults to
#   `yes'.
AC_DEFUN([AC_ENABLE_STATIC],
[define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl
AC_ARG_ENABLE(static,
changequote(<<, >>)dnl
<<  --enable-static[=PKGS]  build static libraries [default=>>AC_ENABLE_STATIC_DEFAULT],
changequote([, ])dnl
[p=${PACKAGE-default}
case $enableval in
yes) enable_static=yes ;;
no) enable_static=no ;;
*)
  enable_static=no
  # Look at the argument we got.  We use all the common list separators.
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
  for pkg in $enableval; do
    if test "X$pkg" = "X$p"; then
      enable_static=yes
    fi
  done
  IFS="$ac_save_ifs"
  ;;
esac],
enable_static=AC_ENABLE_STATIC_DEFAULT)dnl
])

# AC_DISABLE_STATIC - set the default static flag to --disable-static
AC_DEFUN([AC_DISABLE_STATIC],
[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
AC_ENABLE_STATIC(no)])


# AC_ENABLE_FAST_INSTALL - implement the --enable-fast-install flag
# Usage: AC_ENABLE_FAST_INSTALL[(DEFAULT)]
#   Where DEFAULT is either `yes' or `no'.  If omitted, it defaults to
#   `yes'.
AC_DEFUN([AC_ENABLE_FAST_INSTALL],
[define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl
AC_ARG_ENABLE(fast-install,
changequote(<<, >>)dnl
<<  --enable-fast-install[=PKGS]  optimize for fast installation [default=>>AC_ENABLE_FAST_INSTALL_DEFAULT],
changequote([, ])dnl
[p=${PACKAGE-default}
case $enableval in
yes) enable_fast_install=yes ;;
no) enable_fast_install=no ;;
*)
  enable_fast_install=no
  # Look at the argument we got.  We use all the common list separators.
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
  for pkg in $enableval; do
    if test "X$pkg" = "X$p"; then
      enable_fast_install=yes
    fi
  done
  IFS="$ac_save_ifs"
  ;;
esac],
enable_fast_install=AC_ENABLE_FAST_INSTALL_DEFAULT)dnl
])

# AC_DISABLE_FAST_INSTALL - set the default to --disable-fast-install
AC_DEFUN([AC_DISABLE_FAST_INSTALL],
[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
AC_ENABLE_FAST_INSTALL(no)])

# AC_LIBTOOL_PICMODE - implement the --with-pic flag
# Usage: AC_LIBTOOL_PICMODE[(MODE)]
#   Where MODE is either `yes' or `no'.  If omitted, it defaults to
#   `both'.
AC_DEFUN([AC_LIBTOOL_PICMODE],
[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
pic_mode=ifelse($#,1,$1,default)])


# AC_PATH_TOOL_PREFIX - find a file program which can recognise shared library
AC_DEFUN([AC_PATH_TOOL_PREFIX],
[AC_MSG_CHECKING([for $1])
AC_CACHE_VAL(lt_cv_path_MAGIC_CMD,
[case $MAGIC_CMD in
  /*)
  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
  ;;
  ?:/*)
  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a dos path.
  ;;
  *)
  ac_save_MAGIC_CMD="$MAGIC_CMD"
  IFS="${IFS=   }"; ac_save_ifs="$IFS"; IFS=":"
dnl $ac_dummy forces splitting on constant user-supplied paths.
dnl POSIX.2 word splitting is done only on the output of word expansions,
dnl not every word.  This closes a longstanding sh security hole.
  ac_dummy="ifelse([$2], , $PATH, [$2])"
  for ac_dir in $ac_dummy; do
    test -z "$ac_dir" && ac_dir=.
    if test -f $ac_dir/$1; then
      lt_cv_path_MAGIC_CMD="$ac_dir/$1"
      if test -n "$file_magic_test_file"; then
	case $deplibs_check_method in
	"file_magic "*)
	  file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`"
	  MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
	    egrep "$file_magic_regex" > /dev/null; then
	    :
	  else
	    cat <<EOF 1>&2

*** Warning: the command libtool uses to detect shared libraries,
*** $file_magic_cmd, produces output that libtool cannot recognize.
*** The result is that libtool may fail to recognize shared libraries
*** as such.  This will affect the creation of libtool libraries that
*** depend on shared libraries, but programs linked with such libtool
*** libraries will work regardless of this problem.  Nevertheless, you
*** may want to report the problem to your system manager and/or to
*** bug-libtool@gnu.org

EOF
	  fi ;;
	esac
      fi
      break
    fi
  done
  IFS="$ac_save_ifs"
  MAGIC_CMD="$ac_save_MAGIC_CMD"
  ;;
esac])
MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
if test -n "$MAGIC_CMD"; then
  AC_MSG_RESULT($MAGIC_CMD)
else
  AC_MSG_RESULT(no)
fi
])


# AC_PATH_MAGIC - find a file program which can recognise a shared library
AC_DEFUN([AC_PATH_MAGIC],
[AC_REQUIRE([AC_CHECK_TOOL_PREFIX])dnl
AC_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin:$PATH)
if test -z "$lt_cv_path_MAGIC_CMD"; then
  if test -n "$ac_tool_prefix"; then
    AC_PATH_TOOL_PREFIX(file, /usr/bin:$PATH)
  else
    MAGIC_CMD=:
  fi
fi
])


# AC_PROG_LD - find the path to the GNU or non-GNU linker
AC_DEFUN([AC_PROG_LD],
[AC_ARG_WITH(gnu-ld,
[  --with-gnu-ld           assume the C compiler uses GNU ld [default=no]],
test "$withval" = no || with_gnu_ld=yes, with_gnu_ld=no)
AC_REQUIRE([AC_PROG_CC])dnl
AC_REQUIRE([AC_CANONICAL_HOST])dnl
AC_REQUIRE([AC_CANONICAL_BUILD])dnl
AC_REQUIRE([_LT_AC_LIBTOOL_SYS_PATH_SEPARATOR])dnl
ac_prog=ld
if test "$GCC" = yes; then
  # Check if gcc -print-prog-name=ld gives a path.
  AC_MSG_CHECKING([for ld used by GCC])
  case $host in
  *-*-mingw*)
    # gcc leaves a trailing carriage return which upsets mingw
    ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
  *)
    ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
  esac
  case $ac_prog in
    # Accept absolute paths.
    [[\\/]]* | [[A-Za-z]]:[[\\/]]*)
      re_direlt='/[[^/]][[^/]]*/\.\./'
      # Canonicalize the path of ld
      ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
      while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
	ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
      done
      test -z "$LD" && LD="$ac_prog"
      ;;
  "")
    # If it fails, then pretend we aren't using GCC.
    ac_prog=ld
    ;;
  *)
    # If it is relative, then search for the first ld in PATH.
    with_gnu_ld=unknown
    ;;
  esac
elif test "$with_gnu_ld" = yes; then
  AC_MSG_CHECKING([for GNU ld])
else
  AC_MSG_CHECKING([for non-GNU ld])
fi
AC_CACHE_VAL(lt_cv_path_LD,
[if test -z "$LD"; then
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
  for ac_dir in $PATH; do
    test -z "$ac_dir" && ac_dir=.
    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
      lt_cv_path_LD="$ac_dir/$ac_prog"
      # Check to see if the program is GNU ld.  I'd rather use --version,
      # but apparently some GNU ld's only accept -v.
      # Break only if it was the GNU/non-GNU ld that we prefer.
      if "$lt_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
	test "$with_gnu_ld" != no && break
      else
	test "$with_gnu_ld" != yes && break
      fi
    fi
  done
  IFS="$ac_save_ifs"
else
  lt_cv_path_LD="$LD" # Let the user override the test with a path.
fi])
LD="$lt_cv_path_LD"
if test -n "$LD"; then
  AC_MSG_RESULT($LD)
else
  AC_MSG_RESULT(no)
fi
test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
AC_PROG_LD_GNU
])

# AC_PROG_LD_GNU -
AC_DEFUN([AC_PROG_LD_GNU],
[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld,
[# I'd rather use --version here, but apparently some GNU ld's only accept -v.
if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
  lt_cv_prog_gnu_ld=yes
else
  lt_cv_prog_gnu_ld=no
fi])
with_gnu_ld=$lt_cv_prog_gnu_ld
])

# AC_PROG_LD_RELOAD_FLAG - find reload flag for linker
#   -- PORTME Some linkers may need a different reload flag.
AC_DEFUN([AC_PROG_LD_RELOAD_FLAG],
[AC_CACHE_CHECK([for $LD option to reload object files], lt_cv_ld_reload_flag,
[lt_cv_ld_reload_flag='-r'])
reload_flag=$lt_cv_ld_reload_flag
test -n "$reload_flag" && reload_flag=" $reload_flag"
])

# AC_DEPLIBS_CHECK_METHOD - how to check for library dependencies
#  -- PORTME fill in with the dynamic library characteristics
AC_DEFUN([AC_DEPLIBS_CHECK_METHOD],
[AC_CACHE_CHECK([how to recognise dependent libraries],
lt_cv_deplibs_check_method,
[lt_cv_file_magic_cmd='$MAGIC_CMD'
lt_cv_file_magic_test_file=
lt_cv_deplibs_check_method='unknown'
# Need to set the preceding variable on all platforms that support
# interlibrary dependencies.
# 'none' -- dependencies not supported.
# `unknown' -- same as none, but documents that we really don't know.
# 'pass_all' -- all dependencies passed with no checks.
# 'test_compile' -- check by making test program.
# 'file_magic [[regex]]' -- check by looking for files in library path
# which responds to the $file_magic_cmd with a given egrep regex.
# If you have `file' or equivalent on your system and you're not sure
# whether `pass_all' will *always* work, you probably want this one.

case $host_os in
aix4* | aix5*)
  lt_cv_deplibs_check_method=pass_all
  ;;

beos*)
  lt_cv_deplibs_check_method=pass_all
  ;;

bsdi4*)
  lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib)'
  lt_cv_file_magic_cmd='/usr/bin/file -L'
  lt_cv_file_magic_test_file=/shlib/libc.so
  ;;

cygwin* | mingw* | pw32*)
  lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
  lt_cv_file_magic_cmd='$OBJDUMP -f'
  ;;

darwin* | rhapsody*)
  lt_cv_deplibs_check_method='file_magic Mach-O dynamically linked shared library'
  lt_cv_file_magic_cmd='/usr/bin/file -L'
  case "$host_os" in
  rhapsody* | darwin1.[[012]])
    lt_cv_file_magic_test_file=`echo /System/Library/Frameworks/System.framework/Versions/*/System | head -1`
    ;;
  *) # Darwin 1.3 on
    lt_cv_file_magic_test_file='/usr/lib/libSystem.dylib'
    ;;
  esac
  ;;

freebsd*)
  if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
    case $host_cpu in
    i*86 )
      # Not sure whether the presence of OpenBSD here was a mistake.
      # Let's accept both of them until this is cleared up.
      lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD)/i[[3-9]]86 (compact )?demand paged shared library'
      lt_cv_file_magic_cmd=/usr/bin/file
      lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
      ;;
    esac
  else
    lt_cv_deplibs_check_method=pass_all
  fi
  ;;

gnu*)
  lt_cv_deplibs_check_method=pass_all
  ;;

hpux10.20*|hpux11*)
  lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]].[[0-9]]) shared library'
  lt_cv_file_magic_cmd=/usr/bin/file
  lt_cv_file_magic_test_file=/usr/lib/libc.sl
  ;;

irix5* | irix6* | nonstopux*)
  case $host_os in
  irix5* | nonstopux*)
    # this will be overridden with pass_all, but let us keep it just in case
    lt_cv_deplibs_check_method="file_magic ELF 32-bit MSB dynamic lib MIPS - version 1"
    ;;
  *)
    case $LD in
    *-32|*"-32 ") libmagic=32-bit;;
    *-n32|*"-n32 ") libmagic=N32;;
    *-64|*"-64 ") libmagic=64-bit;;
    *) libmagic=never-match;;
    esac
    # this will be overridden with pass_all, but let us keep it just in case
    lt_cv_deplibs_check_method="file_magic ELF ${libmagic} MSB mips-[[1234]] dynamic lib MIPS - version 1"
    ;;
  esac
  lt_cv_file_magic_test_file=`echo /lib${libsuff}/libc.so*`
  lt_cv_deplibs_check_method=pass_all
  ;;

# This must be Linux ELF.
linux-gnu*)
  case $host_cpu in
  alpha* | hppa* | i*86 | mips | mipsel | powerpc* | sparc* | ia64*)
    lt_cv_deplibs_check_method=pass_all ;;
  *)
    # glibc up to 2.1.1 does not perform some relocations on ARM
    lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )' ;;
  esac
  lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so`
  ;;

netbsd*)
  if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
    lt_cv_deplibs_check_method='match_pattern /lib[[^/\.]]+\.so\.[[0-9]]+\.[[0-9]]+$'
  else
    lt_cv_deplibs_check_method='match_pattern /lib[[^/\.]]+\.so$'
  fi
  ;;

newos6*)
  lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (executable|dynamic lib)'
  lt_cv_file_magic_cmd=/usr/bin/file
  lt_cv_file_magic_test_file=/usr/lib/libnls.so
  ;;

openbsd*)
  lt_cv_file_magic_cmd=/usr/bin/file
  lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
  if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
    lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB shared object'
  else
    lt_cv_deplibs_check_method='file_magic OpenBSD.* shared library'
  fi
  ;;

osf3* | osf4* | osf5*)
  # this will be overridden with pass_all, but let us keep it just in case
  lt_cv_deplibs_check_method='file_magic COFF format alpha shared library'
  lt_cv_file_magic_test_file=/shlib/libc.so
  lt_cv_deplibs_check_method=pass_all
  ;;

sco3.2v5*)
  lt_cv_deplibs_check_method=pass_all
  ;;

solaris*)
  lt_cv_deplibs_check_method=pass_all
  lt_cv_file_magic_test_file=/lib/libc.so
  ;;

sysv5uw[[78]]* | sysv4*uw2*)
  lt_cv_deplibs_check_method=pass_all
  ;;

sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
  case $host_vendor in
  motorola)
    lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib) M[[0-9]][[0-9]]* Version [[0-9]]'
    lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
    ;;
  ncr)
    lt_cv_deplibs_check_method=pass_all
    ;;
  sequent)
    lt_cv_file_magic_cmd='/bin/file'
    lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )'
    ;;
  sni)
    lt_cv_file_magic_cmd='/bin/file'
    lt_cv_deplibs_check_method="file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB dynamic lib"
    lt_cv_file_magic_test_file=/lib/libc.so
    ;;
  siemens)
    lt_cv_deplibs_check_method=pass_all
    ;;
  esac
  ;;
esac
])
file_magic_cmd=$lt_cv_file_magic_cmd
deplibs_check_method=$lt_cv_deplibs_check_method
])


# AC_PROG_NM - find the path to a BSD-compatible name lister
AC_DEFUN([AC_PROG_NM],
[AC_REQUIRE([_LT_AC_LIBTOOL_SYS_PATH_SEPARATOR])dnl
AC_MSG_CHECKING([for BSD-compatible nm])
AC_CACHE_VAL(lt_cv_path_NM,
[if test -n "$NM"; then
  # Let the user override the test.
  lt_cv_path_NM="$NM"
else
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
  for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
    test -z "$ac_dir" && ac_dir=.
    tmp_nm=$ac_dir/${ac_tool_prefix}nm
    if test -f $tmp_nm || test -f $tmp_nm$ac_exeext ; then
      # Check to see if the nm accepts a BSD-compat flag.
      # Adding the `sed 1q' prevents false positives on HP-UX, which says:
      #   nm: unknown option "B" ignored
      # Tru64's nm complains that /dev/null is an invalid object file
      if ($tmp_nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep '(/dev/null|Invalid file or object type)' >/dev/null; then
	lt_cv_path_NM="$tmp_nm -B"
	break
      elif ($tmp_nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
	lt_cv_path_NM="$tmp_nm -p"
	break
      else
	lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
	continue # so that we can try to find one that supports BSD flags
      fi
    fi
  done
  IFS="$ac_save_ifs"
  test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm
fi])
NM="$lt_cv_path_NM"
AC_MSG_RESULT([$NM])
])

# AC_CHECK_LIBM - check for math library
AC_DEFUN([AC_CHECK_LIBM],
[AC_REQUIRE([AC_CANONICAL_HOST])dnl
LIBM=
case $host in
*-*-beos* | *-*-cygwin* | *-*-pw32*)
  # These system don't have libm
  ;;
*-ncr-sysv4.3*)
  AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw")
  AC_CHECK_LIB(m, main, LIBM="$LIBM -lm")
  ;;
*)
  AC_CHECK_LIB(m, main, LIBM="-lm")
  ;;
esac
])

# AC_LIBLTDL_CONVENIENCE[(dir)] - sets LIBLTDL to the link flags for
# the libltdl convenience library and LTDLINCL to the include flags for
# the libltdl header and adds --enable-ltdl-convenience to the
# configure arguments.  Note that LIBLTDL and LTDLINCL are not
# AC_SUBSTed, nor is AC_CONFIG_SUBDIRS called.  If DIR is not
# provided, it is assumed to be `libltdl'.  LIBLTDL will be prefixed
# with '${top_builddir}/' and LTDLINCL will be prefixed with
# '${top_srcdir}/' (note the single quotes!).  If your package is not
# flat and you're not using automake, define top_builddir and
# top_srcdir appropriately in the Makefiles.
AC_DEFUN([AC_LIBLTDL_CONVENIENCE],
[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
  case $enable_ltdl_convenience in
  no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;;
  "") enable_ltdl_convenience=yes
      ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;;
  esac
  LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdlc.la
  LTDLINCL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
  # For backwards non-gettext consistent compatibility...
  INCLTDL="$LTDLINCL"
])

# AC_LIBLTDL_INSTALLABLE[(dir)] - sets LIBLTDL to the link flags for
# the libltdl installable library and LTDLINCL to the include flags for
# the libltdl header and adds --enable-ltdl-install to the configure
# arguments.  Note that LIBLTDL and LTDLINCL are not AC_SUBSTed, nor is
# AC_CONFIG_SUBDIRS called.  If DIR is not provided and an installed
# libltdl is not found, it is assumed to be `libltdl'.  LIBLTDL will
# be prefixed with '${top_builddir}/' and LTDLINCL will be prefixed
# with '${top_srcdir}/' (note the single quotes!).  If your package is
# not flat and you're not using automake, define top_builddir and
# top_srcdir appropriately in the Makefiles.
# In the future, this macro may have to be called after AC_PROG_LIBTOOL.
AC_DEFUN([AC_LIBLTDL_INSTALLABLE],
[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
  AC_CHECK_LIB(ltdl, main,
  [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no],
  [if test x"$enable_ltdl_install" = xno; then
     AC_MSG_WARN([libltdl not installed, but installation disabled])
   else
     enable_ltdl_install=yes
   fi
  ])
  if test x"$enable_ltdl_install" = x"yes"; then
    ac_configure_args="$ac_configure_args --enable-ltdl-install"
    LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdl.la
    LTDLINCL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
  else
    ac_configure_args="$ac_configure_args --enable-ltdl-install=no"
    LIBLTDL="-lltdl"
    LTDLINCL=
  fi
  # For backwards non-gettext consistent compatibility...
  INCLTDL="$LTDLINCL"
])

# old names
AC_DEFUN([AM_PROG_LIBTOOL],   [AC_PROG_LIBTOOL])
AC_DEFUN([AM_ENABLE_SHARED],  [AC_ENABLE_SHARED($@)])
AC_DEFUN([AM_ENABLE_STATIC],  [AC_ENABLE_STATIC($@)])
AC_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)])
AC_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)])
AC_DEFUN([AM_PROG_LD],        [AC_PROG_LD])
AC_DEFUN([AM_PROG_NM],        [AC_PROG_NM])

# This is just to silence aclocal about the macro not being used
ifelse([AC_DISABLE_FAST_INSTALL])

# NOTE: This macro has been submitted for inclusion into   #
#  GNU Autoconf as AC_PROG_SED.  When it is available in   #
#  a released version of Autoconf we should remove this    #
#  macro and use it instead.                               #
# LT_AC_PROG_SED
# --------------
# Check for a fully-functional sed program, that truncates
# as few characters as possible.  Prefer GNU sed if found.
AC_DEFUN([LT_AC_PROG_SED],



[AC_MSG_CHECKING([for a sed that does not truncate output])
AC_CACHE_VAL(lt_cv_path_SED,
[# Loop through the user's path and test for sed and gsed.
# Then use that list of sed's as ones to test for truncation.
as_executable_p="test -f"
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
  IFS=$as_save_IFS
  test -z "$as_dir" && as_dir=.
  for ac_prog in sed gsed; do
    for ac_exec_ext in '' $ac_executable_extensions; do
      if $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then
        _sed_list="$_sed_list $as_dir/$ac_prog$ac_exec_ext"
      fi
    done
  done
done

  # Create a temporary directory, and hook for its removal unless debugging.
$debug ||
{
  trap 'exit_status=$?; rm -rf $tmp && exit $exit_status' 0
  trap '{ (exit 1); exit 1; }' 1 2 13 15
}

# Create a (secure) tmp directory for tmp files.
: ${TMPDIR=/tmp}
{
  tmp=`(umask 077 && mktemp -d -q "$TMPDIR/sedXXXXXX") 2>/dev/null` &&
  test -n "$tmp" && test -d "$tmp"
}  ||
{
  tmp=$TMPDIR/sed$$-$RANDOM
  (umask 077 && mkdir $tmp)
} ||
{
   echo "$me: cannot create a temporary directory in $TMPDIR" >&2
   { (exit 1); exit 1; }
}
  _max=0
  _count=0
  # Add /usr/xpg4/bin/sed as it is typically found on Solaris
  # along with /bin/sed that truncates output.
  for _sed in $_sed_list /usr/xpg4/bin/sed; do
    test ! -f ${_sed} && break
    cat /dev/null > "$tmp/sed.in"
    _count=0
    echo ${ECHO_N-$ac_n} "0123456789${ECHO_C-$ac_c}" >"$tmp/sed.in"
    # Check for GNU sed and select it if it is found.
    if "${_sed}" --version 2>&1 < /dev/null | egrep '(GNU)' > /dev/null; then
      lt_cv_path_SED=${_sed}
      break
    fi
    while true; do
      cat "$tmp/sed.in" "$tmp/sed.in" >"$tmp/sed.tmp"
      mv "$tmp/sed.tmp" "$tmp/sed.in"
      cp "$tmp/sed.in" "$tmp/sed.nl"
      echo >>"$tmp/sed.nl"
      ${_sed} -e 's/a$//' < "$tmp/sed.nl" >"$tmp/sed.out" || break
      cmp -s "$tmp/sed.out" "$tmp/sed.nl" || break
      # 40000 chars as input seems more than enough
      test $_count -gt 10 && break
      _count=`expr $_count + 1`
      if test $_count -gt $_max; then
        _max=$_count
        lt_cv_path_SED=$_sed
      fi
    done
  done
  rm -rf "$tmp"
])
if test "X$SED" != "X"; then
  lt_cv_path_SED=$SED
else
  SED=$lt_cv_path_SED
fi
AC_MSG_RESULT([$SED])
])

#! /bin/sh
# Attempt to guess a canonical system name.
#   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001
#   Free Software Foundation, Inc.

timestamp='2001-09-04'

# This file is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful, but
................................................................................
# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
#
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
# configuration script generated by Autoconf, you may include it under
# the same distribution terms that you use for the rest of that program.

# Written by Per Bothner <bothner@cygnus.com>.
# Please send patches to <config-patches@gnu.org>.

#
# This script attempts to guess a canonical system name similar to
# config.sub.  If it succeeds, it prints the system name on stdout, and
# exits with 0.  Otherwise, it exits with 1.
#
# The plan is that this can be called by configure scripts if you
# don't specify an explicit build system type.
................................................................................
done

if test $# != 0; then
  echo "$me: too many arguments$help" >&2
  exit 1
fi



dummy=dummy-$$
trap 'rm -f $dummy.c $dummy.o $dummy.rel $dummy; exit 1' 1 2 15




# CC_FOR_BUILD -- compiler used by this script.
# Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still
# use `HOST_CC' if defined, but it is deprecated.












set_cc_for_build='case $CC_FOR_BUILD,$HOST_CC,$CC in
 ,,)    echo "int dummy(){}" > $dummy.c ;
	for c in cc gcc c89 ; do
	  ($c $dummy.c -c -o $dummy.o) >/dev/null 2>&1 ;
	  if test $? = 0 ; then
	     CC_FOR_BUILD="$c"; break ;
	  fi ;
	done ;
	rm -f $dummy.c $dummy.o $dummy.rel ;
	if test x"$CC_FOR_BUILD" = x ; then
	  CC_FOR_BUILD=no_compiler_found ;
	fi
	;;
 ,,*)   CC_FOR_BUILD=$CC ;;
 ,*,*)  CC_FOR_BUILD=$HOST_CC ;;
esac'

# This is needed to find uname on a Pyramid OSx when run in the BSD universe.
# (ghazi@noc.rutgers.edu 1994-08-24)
if (test -f /.attbin/uname) >/dev/null 2>&1 ; then
	PATH=$PATH:/.attbin ; export PATH
fi

................................................................................
UNAME_SYSTEM=`(uname -s) 2>/dev/null`  || UNAME_SYSTEM=unknown
UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown

# Note: order is significant - the case branches are not exclusive.

case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
    *:NetBSD:*:*)
	# Netbsd (nbsd) targets should (where applicable) match one or
	# more of the tupples: *-*-netbsdelf*, *-*-netbsdaout*,
	# *-*-netbsdecoff* and *-*-netbsd*.  For targets that recently
	# switched to ELF, *-*-netbsd* would select the old
	# object file format.  This provides both forward
	# compatibility and a consistent mechanism for selecting the
	# object file format.
	# Determine the machine/vendor (is the vendor relevant).
	case "${UNAME_MACHINE}" in
	    amiga) machine=m68k-unknown ;;
	    arm32) machine=arm-unknown ;;
	    atari*) machine=m68k-atari ;;
	    sun3*) machine=m68k-sun ;;
	    mac68k) machine=m68k-apple ;;
	    macppc) machine=powerpc-apple ;;
	    hp3[0-9][05]) machine=m68k-hp ;;
	    ibmrt|romp-ibm) machine=romp-ibm ;;
	    *) machine=${UNAME_MACHINE}-unknown ;;
	esac
	# The Operating System including object format, if it has switched
	# to ELF recently, or will in the future.
	case "${UNAME_MACHINE}" in
	    i386|sparc|amiga|arm*|hp300|mvme68k|vax|atari|luna68k|mac68k|news68k|next68k|pc532|sun3*|x68k)

		eval $set_cc_for_build
		if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \
			| grep __ELF__ >/dev/null
		then
		    # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout).
		    # Return netbsd for either.  FIX?
		    os=netbsd
................................................................................
		fi
		;;
	    *)
	        os=netbsd
		;;
	esac
	# The OS release









	release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`


	# Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM:
	# contains redundant information, the shorter form:
	# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used.
	echo "${machine}-${os}${release}"
	exit 0 ;;










































    alpha:OSF1:*:*)
	if test $UNAME_RELEASE = "V4.0"; then
		UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'`
	fi
	# A Vn.n version is a released version.
	# A Tn.n version is a released field test version.
	# A Xn.n version is an unreleased experimental baselevel.
	# 1.2 uses "1.2" for uname -r.

	cat <<EOF >$dummy.s
	.data
\$Lformat:
	.byte 37,100,45,37,120,10,0	# "%d-%x\n"

	.text
	.globl main
................................................................................
	not \$1,\$18
	jsr \$26,printf
	ldgp \$29,0(\$26)
	mov 0,\$16
	jsr \$26,exit
	.end main
EOF
	eval $set_cc_for_build
	$CC_FOR_BUILD $dummy.s -o $dummy 2>/dev/null
	if test "$?" = 0 ; then
		case `./$dummy` in
			0-0)
				UNAME_MACHINE="alpha"
				;;
			1-0)
				UNAME_MACHINE="alphaev5"
				;;
			1-1)
................................................................................
				;;
			2-307)
				UNAME_MACHINE="alphaev67"
				;;
			2-1307)
				UNAME_MACHINE="alphaev68"
				;;



		esac
	fi
	rm -f $dummy.s $dummy
	echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[VTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
	exit 0 ;;
    Alpha\ *:Windows_NT*:*)
	# How do we know it's Interix rather than the generic POSIX subsystem?
	# Should we change UNAME_MACHINE based on the output of uname instead
	# of the specific Alpha model?
	echo alpha-pc-interix
................................................................................
	exit 0 ;;
    21064:Windows_NT:50:3)
	echo alpha-dec-winnt3.5
	exit 0 ;;
    Amiga*:UNIX_System_V:4.0:*)
	echo m68k-unknown-sysv4
	exit 0;;
    amiga:OpenBSD:*:*)
	echo m68k-unknown-openbsd${UNAME_RELEASE}
	exit 0 ;;
    *:[Aa]miga[Oo][Ss]:*:*)
	echo ${UNAME_MACHINE}-unknown-amigaos
	exit 0 ;;
    arc64:OpenBSD:*:*)
	echo mips64el-unknown-openbsd${UNAME_RELEASE}
	exit 0 ;;
    arc:OpenBSD:*:*)
	echo mipsel-unknown-openbsd${UNAME_RELEASE}
	exit 0 ;;
    hkmips:OpenBSD:*:*)
	echo mips-unknown-openbsd${UNAME_RELEASE}
	exit 0 ;;
    pmax:OpenBSD:*:*)
	echo mipsel-unknown-openbsd${UNAME_RELEASE}
	exit 0 ;;
    sgi:OpenBSD:*:*)
	echo mips-unknown-openbsd${UNAME_RELEASE}
	exit 0 ;;
    wgrisc:OpenBSD:*:*)
	echo mipsel-unknown-openbsd${UNAME_RELEASE}
	exit 0 ;;
    *:OS/390:*:*)
	echo i370-ibm-openedition
	exit 0 ;;
    arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*)
	echo arm-acorn-riscix${UNAME_RELEASE}
	exit 0;;
................................................................................
	else
		echo pyramid-pyramid-bsd
	fi
	exit 0 ;;
    NILE*:*:*:dcosx)
	echo pyramid-pyramid-svr4
	exit 0 ;;




    sun4H:SunOS:5.*:*)
	echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
	exit 0 ;;
    sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*)
	echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
	exit 0 ;;
    i86pc:SunOS:5.*:*)
................................................................................
	# Japanese Language versions have a version number like `4.1.3-JL'.
	echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'`
	exit 0 ;;
    sun3*:SunOS:*:*)
	echo m68k-sun-sunos${UNAME_RELEASE}
	exit 0 ;;
    sun*:*:4.2BSD:*)
	UNAME_RELEASE=`(head -1 /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null`
	test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3
	case "`/bin/arch`" in
	    sun3)
		echo m68k-sun-sunos${UNAME_RELEASE}
		;;
	    sun4)
		echo sparc-sun-sunos${UNAME_RELEASE}
		;;
	esac
	exit 0 ;;
    aushp:SunOS:*:*)
	echo sparc-auspex-sunos${UNAME_RELEASE}
	exit 0 ;;
    sparc*:NetBSD:*)
	echo `uname -p`-unknown-netbsd${UNAME_RELEASE}
	exit 0 ;;
    atari*:OpenBSD:*:*)
	echo m68k-unknown-openbsd${UNAME_RELEASE}
	exit 0 ;;
    # The situation for MiNT is a little confusing.  The machine name
    # can be virtually everything (everything which is not
    # "atarist" or "atariste" at least should have a processor
    # > m68000).  The system name ranges from "MiNT" over "FreeMiNT"
    # to the lowercase version "mint" (or "freemint").  Finally
    # the system name "TOS" denotes a system which is actually not
    # MiNT.  But MiNT is downward compatible to TOS, so this should
................................................................................
        exit 0 ;;
    hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*)
        echo m68k-hades-mint${UNAME_RELEASE}
        exit 0 ;;
    *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*)
        echo m68k-unknown-mint${UNAME_RELEASE}
        exit 0 ;;
    sun3*:OpenBSD:*:*)
	echo m68k-unknown-openbsd${UNAME_RELEASE}
	exit 0 ;;
    mac68k:OpenBSD:*:*)
	echo m68k-unknown-openbsd${UNAME_RELEASE}
	exit 0 ;;
    mvme68k:OpenBSD:*:*)
	echo m68k-unknown-openbsd${UNAME_RELEASE}
	exit 0 ;;
    mvme88k:OpenBSD:*:*)
	echo m88k-unknown-openbsd${UNAME_RELEASE}
	exit 0 ;;
    powerpc:machten:*:*)
	echo powerpc-apple-machten${UNAME_RELEASE}
	exit 0 ;;
    RISC*:Mach:*:*)
	echo mips-dec-mach_bsd4.3
	exit 0 ;;
    RISC*:ULTRIX:*:*)
................................................................................
	#if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD)
	  printf ("mips-mips-riscos%sbsd\n", argv[1]); exit (0);
	#endif
	#endif
	  exit (-1);
	}
EOF
	$CC_FOR_BUILD $dummy.c -o $dummy \
	  && ./$dummy `echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` \
	  && rm -f $dummy.c $dummy && exit 0
	rm -f $dummy.c $dummy
	echo mips-mips-riscos${UNAME_RELEASE}
	exit 0 ;;
    Motorola:PowerMAX_OS:*:*)
	echo powerpc-motorola-powermax
	exit 0 ;;






    Night_Hawk:Power_UNIX:*:*)
	echo powerpc-harris-powerunix
	exit 0 ;;
    m88k:CX/UX:7*:*)
	echo m88k-harris-cxux7
	exit 0 ;;
    m88k:*:4*:R4*)
................................................................................
			{
			if (!__power_pc())
				exit(1);
			puts("powerpc-ibm-aix3.2.5");
			exit(0);
			}
EOF
		$CC_FOR_BUILD $dummy.c -o $dummy && ./$dummy && rm -f $dummy.c $dummy && exit 0
		rm -f $dummy.c $dummy
		echo rs6000-ibm-aix3.2.5
	elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then
		echo rs6000-ibm-aix3.2.4
	else
		echo rs6000-ibm-aix3.2
	fi
	exit 0 ;;
    *:AIX:*:[45])
	IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | head -1 | awk '{ print $1 }'`
	if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then
		IBM_ARCH=rs6000
	else
		IBM_ARCH=powerpc
	fi
	if [ -x /usr/bin/oslevel ] ; then
		IBM_REV=`/usr/bin/oslevel`
................................................................................
	exit 0 ;;
    9000/[34678]??:HP-UX:*:*)
	HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
	case "${UNAME_MACHINE}" in
	    9000/31? )            HP_ARCH=m68000 ;;
	    9000/[34]?? )         HP_ARCH=m68k ;;
	    9000/[678][0-9][0-9])
              case "${HPUX_REV}" in
                11.[0-9][0-9])
                  if [ -x /usr/bin/getconf ]; then
                    sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null`
                    sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null`
                    case "${sc_cpu_version}" in
                      523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0
                      528) HP_ARCH="hppa1.1" ;; # CPU_PA_RISC1_1
                      532)                      # CPU_PA_RISC2_0
                        case "${sc_kernel_bits}" in
                          32) HP_ARCH="hppa2.0n" ;;
                          64) HP_ARCH="hppa2.0w" ;;

                        esac ;;
                    esac
                  fi ;;
              esac
              if [ "${HP_ARCH}" = "" ]; then
	      eval $set_cc_for_build
              sed 's/^              //' << EOF >$dummy.c

              #define _HPUX_SOURCE
              #include <stdlib.h>
              #include <unistd.h>

              int main ()
              {
................................................................................
              	    puts ("hppa2.0"); break;
              #endif
              	default: puts ("hppa1.0"); break;
              	}
                  exit (0);
              }
EOF
	    (CCOPTS= $CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null ) && HP_ARCH=`./$dummy`
	    if test -z "$HP_ARCH"; then HP_ARCH=hppa; fi
	    rm -f $dummy.c $dummy
	fi ;;
	esac











	echo ${HP_ARCH}-hp-hpux${HPUX_REV}
	exit 0 ;;
    ia64:HP-UX:*:*)
	HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
	echo ia64-hp-hpux${HPUX_REV}
	exit 0 ;;
    3050*:HI-UX:*:*)
................................................................................
	    }
	  else if (CPU_IS_HP_MC68K (cpu))
	    puts ("m68k-hitachi-hiuxwe2");
	  else puts ("unknown-hitachi-hiuxwe2");
	  exit (0);
	}
EOF
	$CC_FOR_BUILD $dummy.c -o $dummy && ./$dummy && rm -f $dummy.c $dummy && exit 0
	rm -f $dummy.c $dummy
	echo unknown-hitachi-hiuxwe2
	exit 0 ;;
    9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* )
	echo hppa1.1-hp-bsd
	exit 0 ;;
    9000/8??:4.3bsd:*:*)
	echo hppa1.0-hp-bsd
................................................................................
	else
	    echo ${UNAME_MACHINE}-unknown-osf1
	fi
	exit 0 ;;
    parisc*:Lites*:*:*)
	echo hppa1.1-hp-lites
	exit 0 ;;
    hppa*:OpenBSD:*:*)
	echo hppa-unknown-openbsd
	exit 0 ;;
    C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*)
	echo c1-convex-bsd
        exit 0 ;;
    C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*)
	if getsysinfo -f scalar_acc
	then echo c32-convex-bsd
	else echo c2-convex-bsd
................................................................................
        exit 0 ;;
    C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*)
	echo c38-convex-bsd
        exit 0 ;;
    C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*)
	echo c4-convex-bsd
        exit 0 ;;
    CRAY*X-MP:*:*:*)
	echo xmp-cray-unicos
        exit 0 ;;
    CRAY*Y-MP:*:*:*)
	echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
	exit 0 ;;
    CRAY*[A-Z]90:*:*:*)
	echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \
	| sed -e 's/CRAY.*\([A-Z]90\)/\1/' \
	      -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \
	      -e 's/\.[^.]*$/.X/'
	exit 0 ;;
    CRAY*TS:*:*:*)
	echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
	exit 0 ;;
    CRAY*T3D:*:*:*)
	echo alpha-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
	exit 0 ;;
    CRAY*T3E:*:*:*)
	echo alphaev5-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
	exit 0 ;;
    CRAY*SV1:*:*:*)
	echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
	exit 0 ;;
    CRAY-2:*:*:*)
	echo cray2-cray-unicos
        exit 0 ;;
    F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*)
	FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
        FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
        FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'`
        echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
        exit 0 ;;
    hp300:OpenBSD:*:*)
	echo m68k-unknown-openbsd${UNAME_RELEASE}
	exit 0 ;;
    i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*)
	echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE}
	exit 0 ;;
    sparc*:BSD/OS:*:*)
	echo sparc-unknown-bsdi${UNAME_RELEASE}
	exit 0 ;;
    *:BSD/OS:*:*)
	echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE}
	exit 0 ;;
    *:FreeBSD:*:*)











	echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`
	exit 0 ;;
    *:OpenBSD:*:*)
	echo ${UNAME_MACHINE}-unknown-openbsd`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
	exit 0 ;;
    i*:CYGWIN*:*)
	echo ${UNAME_MACHINE}-pc-cygwin
	exit 0 ;;
    i*:MINGW*:*)
	echo ${UNAME_MACHINE}-pc-mingw32
	exit 0 ;;
    i*:PW*:*)
	echo ${UNAME_MACHINE}-pc-pw32
	exit 0 ;;






    i*:Windows_NT*:* | Pentium*:Windows_NT*:*)
	# How do we know it's Interix rather than the generic POSIX subsystem?
	# It also conflicts with pre-2.0 versions of AT&T UWIN. Should we
	# UNAME_MACHINE based on the output of uname instead of i386?
	echo i386-pc-interix
	exit 0 ;;
    i*:UWIN*:*)
	echo ${UNAME_MACHINE}-pc-uwin
	exit 0 ;;
    p*:CYGWIN*:*)
	echo powerpcle-unknown-cygwin
	exit 0 ;;
................................................................................
    i*86:Minix:*:*)
	echo ${UNAME_MACHINE}-pc-minix
	exit 0 ;;
    arm*:Linux:*:*)
	echo ${UNAME_MACHINE}-unknown-linux-gnu
	exit 0 ;;
    ia64:Linux:*:*)
	echo ${UNAME_MACHINE}-unknown-linux
	exit 0 ;;
    m68*:Linux:*:*)
	echo ${UNAME_MACHINE}-unknown-linux-gnu
	exit 0 ;;
    mips:Linux:*:*)
	case `sed -n '/^byte/s/^.*: \(.*\) endian/\1/p' < /proc/cpuinfo` in
	  big)    echo mips-unknown-linux-gnu && exit 0 ;;
	  little) echo mipsel-unknown-linux-gnu && exit 0 ;;
	esac
































	;;
    ppc:Linux:*:*)
	echo powerpc-unknown-linux-gnu
	exit 0 ;;
    ppc64:Linux:*:*)
	echo powerpc64-unknown-linux-gnu
	exit 0 ;;
................................................................................
    x86_64:Linux:*:*)
	echo x86_64-unknown-linux-gnu
	exit 0 ;;
    i*86:Linux:*:*)
	# The BFD linker knows what the default object file format is, so
	# first see if it will tell us. cd to the root directory to prevent
	# problems with other programs or directories called `ld' in the path.

	ld_supported_targets=`cd /; ld --help 2>&1 \
			 | sed -ne '/supported targets:/!d
				    s/[ 	][ 	]*/ /g
				    s/.*supported targets: *//
				    s/ .*//
				    p'`
        case "$ld_supported_targets" in
	  elf32-i386)
		TENTATIVE="${UNAME_MACHINE}-pc-linux-gnu"
		;;
	  a.out-i386-linux)
		echo "${UNAME_MACHINE}-pc-linux-gnuaout"
		exit 0 ;;		
	  coff-i386)
		echo "${UNAME_MACHINE}-pc-linux-gnucoff"
		exit 0 ;;
	  "")
		# Either a pre-BFD a.out linker (linux-gnuoldld) or
		# one that does not give us useful --help.
		echo "${UNAME_MACHINE}-pc-linux-gnuoldld"
		exit 0 ;;
	esac
	# Determine whether the default compiler is a.out or elf
	eval $set_cc_for_build
	cat >$dummy.c <<EOF
#include <features.h>
#ifdef __cplusplus
#include <stdio.h>  /* for printf() prototype */
	int main (int argc, char *argv[]) {
#else
	int main (argc, argv) int argc; char *argv[]; {
#endif
#ifdef __ELF__
# ifdef __GLIBC__
#  if __GLIBC__ >= 2
    printf ("%s-pc-linux-gnu\n", argv[1]);

#  else
    printf ("%s-pc-linux-gnulibc1\n", argv[1]);

#  endif
# else
   printf ("%s-pc-linux-gnulibc1\n", argv[1]);

# endif
#else
  printf ("%s-pc-linux-gnuaout\n", argv[1]);




#endif
  return 0;
}

EOF
	$CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null && ./$dummy "${UNAME_MACHINE}" && rm -f $dummy.c $dummy && exit 0
	rm -f $dummy.c $dummy


	test x"${TENTATIVE}" != x && echo "${TENTATIVE}" && exit 0
	;;
    i*86:DYNIX/ptx:4*:*)
	# ptx 4.0 does uname -s correctly, with DYNIX/ptx in there.
	# earlier versions are messed up and put the nodename in both
	# sysname and nodename.
	echo i386-sequent-sysv4
................................................................................
        # Unixware is an offshoot of SVR4, but it has its own version
        # number series starting with 2...
        # I am not positive that other SVR4 systems won't match this,
	# I just have to hope.  -- rms.
        # Use sysv4.2uw... so that sysv4* matches it.
	echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION}
	exit 0 ;;

















    i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*)
	UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'`
	if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then
		echo ${UNAME_MACHINE}-univel-sysv${UNAME_REL}
	else
		echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL}
	fi
................................................................................
	echo ${UNAME_MACHINE}-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION}
	exit 0 ;;
    i*86:*:3.2:*)
	if test -f /usr/options/cb.name; then
		UNAME_REL=`sed -n 's/.*Version //p' </usr/options/cb.name`
		echo ${UNAME_MACHINE}-pc-isc$UNAME_REL
	elif /bin/uname -X 2>/dev/null >/dev/null ; then
		UNAME_REL=`(/bin/uname -X|egrep Release|sed -e 's/.*= //')`
		(/bin/uname -X|egrep i80486 >/dev/null) && UNAME_MACHINE=i486
		(/bin/uname -X|egrep '^Machine.*Pentium' >/dev/null) \
			&& UNAME_MACHINE=i586
		(/bin/uname -X|egrep '^Machine.*Pent ?II' >/dev/null) \
			&& UNAME_MACHINE=i686
		(/bin/uname -X|egrep '^Machine.*Pentium Pro' >/dev/null) \
			&& UNAME_MACHINE=i686
		echo ${UNAME_MACHINE}-pc-sco$UNAME_REL
	else
		echo ${UNAME_MACHINE}-pc-sysv32
	fi
	exit 0 ;;
    i*86:*DOS:*:*)
	echo ${UNAME_MACHINE}-pc-msdosdjgpp
	exit 0 ;;
    pc:*:*:*)
	# Left here for compatibility:
        # uname -m prints for DJGPP always 'pc', but it prints nothing about
        # the processor, so we play safe by assuming i386.
	echo i386-pc-msdosdjgpp
        exit 0 ;;
    Intel:Mach:3*:*)
................................................................................
	else # Add other i860-SVR4 vendors below as they are discovered.
	  echo i860-unknown-sysv${UNAME_RELEASE}  # Unknown i860-SVR4
	fi
	exit 0 ;;
    mini*:CTIX:SYS*5:*)
	# "miniframe"
	echo m68010-convergent-sysv






	exit 0 ;;
    M68*:*:R3V[567]*:*)
	test -r /sysV68 && echo 'm68k-motorola-sysv' && exit 0 ;;
    3[34]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 4850:*:4.0:3.0)
	OS_REL=''
	test -r /etc/.relid \
	&& OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
	/bin/uname -p 2>/dev/null | grep 86 >/dev/null \
	  && echo i486-ncr-sysv4.3${OS_REL} && exit 0
	/bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \
	  && echo i586-ncr-sysv4.3${OS_REL} && exit 0 ;;
................................................................................
          && echo i486-ncr-sysv4 && exit 0 ;;
    m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*)
	echo m68k-unknown-lynxos${UNAME_RELEASE}
	exit 0 ;;
    mc68030:UNIX_System_V:4.*:*)
	echo m68k-atari-sysv4
	exit 0 ;;
    i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.0*:*)
	echo i386-unknown-lynxos${UNAME_RELEASE}
	exit 0 ;;
    TSUNAMI:LynxOS:2.*:*)
	echo sparc-unknown-lynxos${UNAME_RELEASE}
	exit 0 ;;
    rs6000:LynxOS:2.*:*)
	echo rs6000-unknown-lynxos${UNAME_RELEASE}
	exit 0 ;;
    PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.0*:*)
................................................................................
	exit 0 ;;
    SX-4:SUPER-UX:*:*)
	echo sx4-nec-superux${UNAME_RELEASE}
	exit 0 ;;
    SX-5:SUPER-UX:*:*)
	echo sx5-nec-superux${UNAME_RELEASE}
	exit 0 ;;



    Power*:Rhapsody:*:*)
	echo powerpc-apple-rhapsody${UNAME_RELEASE}
	exit 0 ;;
    *:Rhapsody:*:*)
	echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE}
	exit 0 ;;
    *:Darwin:*:*)




	echo `uname -p`-apple-darwin${UNAME_RELEASE}
	exit 0 ;;
    *:procnto*:*:* | *:QNX:[0123456789]*:*)
	if test "${UNAME_MACHINE}" = "x86pc"; then



		UNAME_MACHINE=pc
	fi
	echo `uname -p`-${UNAME_MACHINE}-nto-qnx
	exit 0 ;;
    *:QNX:*:4*)
	echo i386-pc-qnx
	exit 0 ;;
    NSR-[KW]:NONSTOP_KERNEL:*:*)
	echo nsr-tandem-nsk${UNAME_RELEASE}
	exit 0 ;;
    *:NonStop-UX:*:*)
	echo mips-compaq-nonstopux
	exit 0 ;;
    BS2000:POSIX*:*:*)
	echo bs2000-siemens-sysv
................................................................................
	if test "$cputype" = "386"; then
	    UNAME_MACHINE=i386
	else
	    UNAME_MACHINE="$cputype"
	fi
	echo ${UNAME_MACHINE}-unknown-plan9
	exit 0 ;;
    i*86:OS/2:*:*)
	# If we were able to find `uname', then EMX Unix compatibility
	# is probably installed.
	echo ${UNAME_MACHINE}-pc-os2-emx
	exit 0 ;;
    *:TOPS-10:*:*)
	echo pdp10-unknown-tops10
	exit 0 ;;
    *:TENEX:*:*)
	echo pdp10-unknown-tenex
	exit 0 ;;
    KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*)
................................................................................
	exit 0 ;;
    *:TOPS-20:*:*)
	echo pdp10-unknown-tops20
	exit 0 ;;
    *:ITS:*:*)
	echo pdp10-unknown-its
	exit 0 ;;
    i*86:XTS-300:*:STOP)
	echo ${UNAME_MACHINE}-unknown-stop
	exit 0 ;;
    i*86:atheos:*:*)
	echo ${UNAME_MACHINE}-unknown-atheos
	exit 0 ;;
esac

#echo '(No uname command or uname output not recognized.)' 1>&2
#echo "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" 1>&2

eval $set_cc_for_build
cat >$dummy.c <<EOF
................................................................................
  printf ("i860-alliant-bsd\n"); exit (0);
#endif

  exit (1);
}
EOF

$CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null && ./$dummy && rm -f $dummy.c $dummy && exit 0
rm -f $dummy.c $dummy

# Apollos put the system type in the environment.

test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit 0; }

# Convex versions that predate uname can use getsysinfo(1)

#! /bin/sh
# Attempt to guess a canonical system name.
#   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
#   2000, 2001, 2002, 2003 Free Software Foundation, Inc.

timestamp='2003-01-10'

# This file is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful, but
................................................................................
# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
#
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
# configuration script generated by Autoconf, you may include it under
# the same distribution terms that you use for the rest of that program.

# Originally written by Per Bothner <per@bothner.com>.
# Please send patches to <config-patches@gnu.org>.  Submit a context
# diff and a properly formatted ChangeLog entry.
#
# This script attempts to guess a canonical system name similar to
# config.sub.  If it succeeds, it prints the system name on stdout, and
# exits with 0.  Otherwise, it exits with 1.
#
# The plan is that this can be called by configure scripts if you
# don't specify an explicit build system type.
................................................................................
done

if test $# != 0; then
  echo "$me: too many arguments$help" >&2
  exit 1
fi

trap 'exit 1' 1 2 15


# CC_FOR_BUILD -- compiler used by this script. Note that the use of a
# compiler to aid in system detection is discouraged as it requires
# temporary files to be created and, as you can see below, it is a
# headache to deal with in a portable fashion.


# Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still
# use `HOST_CC' if defined, but it is deprecated.

# Portable tmp directory creation inspired by the Autoconf team.

set_cc_for_build='
trap "exitcode=\$?; (rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null) && exit \$exitcode" 0 ;
trap "rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null; exit 1" 1 2 13 15 ;
: ${TMPDIR=/tmp} ;
 { tmp=`(umask 077 && mktemp -d -q "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } ||
 { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir $tmp) ; } ||
 { echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; } ;
dummy=$tmp/dummy ;
tmpfiles="$dummy.c $dummy.o $dummy.rel $dummy" ;
case $CC_FOR_BUILD,$HOST_CC,$CC in
 ,,)    echo "int x;" > $dummy.c ;
	for c in cc gcc c89 c99 ; do
	  if ($c -c -o $dummy.o $dummy.c) >/dev/null 2>&1 ; then

	     CC_FOR_BUILD="$c"; break ;
	  fi ;
	done ;

	if test x"$CC_FOR_BUILD" = x ; then
	  CC_FOR_BUILD=no_compiler_found ;
	fi
	;;
 ,,*)   CC_FOR_BUILD=$CC ;;
 ,*,*)  CC_FOR_BUILD=$HOST_CC ;;
esac ;'

# This is needed to find uname on a Pyramid OSx when run in the BSD universe.
# (ghazi@noc.rutgers.edu 1994-08-24)
if (test -f /.attbin/uname) >/dev/null 2>&1 ; then
	PATH=$PATH:/.attbin ; export PATH
fi

................................................................................
UNAME_SYSTEM=`(uname -s) 2>/dev/null`  || UNAME_SYSTEM=unknown
UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown

# Note: order is significant - the case branches are not exclusive.

case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
    *:NetBSD:*:*)
	# NetBSD (nbsd) targets should (where applicable) match one or
	# more of the tupples: *-*-netbsdelf*, *-*-netbsdaout*,
	# *-*-netbsdecoff* and *-*-netbsd*.  For targets that recently
	# switched to ELF, *-*-netbsd* would select the old
	# object file format.  This provides both forward
	# compatibility and a consistent mechanism for selecting the
	# object file format.
	#
	# Note: NetBSD doesn't particularly care about the vendor
	# portion of the name.  We always set it to "unknown".
	sysctl="sysctl -n hw.machine_arch"
	UNAME_MACHINE_ARCH=`(/sbin/$sysctl 2>/dev/null || \
	    /usr/sbin/$sysctl 2>/dev/null || echo unknown)`
	case "${UNAME_MACHINE_ARCH}" in
	    armeb) machine=armeb-unknown ;;
	    arm*) machine=arm-unknown ;;
	    sh3el) machine=shl-unknown ;;
	    sh3eb) machine=sh-unknown ;;
	    *) machine=${UNAME_MACHINE_ARCH}-unknown ;;
	esac
	# The Operating System including object format, if it has switched
	# to ELF recently, or will in the future.
	case "${UNAME_MACHINE_ARCH}" in
	    arm*|i386|m68k|ns32k|sh3*|sparc|vax)
		eval $set_cc_for_build
		if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \
			| grep __ELF__ >/dev/null
		then
		    # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout).
		    # Return netbsd for either.  FIX?
		    os=netbsd
................................................................................
		fi
		;;
	    *)
	        os=netbsd
		;;
	esac
	# The OS release
	# Debian GNU/NetBSD machines have a different userland, and
	# thus, need a distinct triplet. However, they do not need
	# kernel version information, so it can be replaced with a
	# suitable tag, in the style of linux-gnu.
	case "${UNAME_VERSION}" in
	    Debian*)
		release='-gnu'
		;;
	    *)
		release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
		;;
	esac
	# Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM:
	# contains redundant information, the shorter form:
	# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used.
	echo "${machine}-${os}${release}"
	exit 0 ;;
    amiga:OpenBSD:*:*)
	echo m68k-unknown-openbsd${UNAME_RELEASE}
	exit 0 ;;
    arc:OpenBSD:*:*)
	echo mipsel-unknown-openbsd${UNAME_RELEASE}
	exit 0 ;;
    hp300:OpenBSD:*:*)
	echo m68k-unknown-openbsd${UNAME_RELEASE}
	exit 0 ;;
    mac68k:OpenBSD:*:*)
	echo m68k-unknown-openbsd${UNAME_RELEASE}
	exit 0 ;;
    macppc:OpenBSD:*:*)
	echo powerpc-unknown-openbsd${UNAME_RELEASE}
	exit 0 ;;
    mvme68k:OpenBSD:*:*)
	echo m68k-unknown-openbsd${UNAME_RELEASE}
	exit 0 ;;
    mvme88k:OpenBSD:*:*)
	echo m88k-unknown-openbsd${UNAME_RELEASE}
	exit 0 ;;
    mvmeppc:OpenBSD:*:*)
	echo powerpc-unknown-openbsd${UNAME_RELEASE}
	exit 0 ;;
    pmax:OpenBSD:*:*)
	echo mipsel-unknown-openbsd${UNAME_RELEASE}
	exit 0 ;;
    sgi:OpenBSD:*:*)
	echo mipseb-unknown-openbsd${UNAME_RELEASE}
	exit 0 ;;
    sun3:OpenBSD:*:*)
	echo m68k-unknown-openbsd${UNAME_RELEASE}
	exit 0 ;;
    wgrisc:OpenBSD:*:*)
	echo mipsel-unknown-openbsd${UNAME_RELEASE}
	exit 0 ;;
    *:OpenBSD:*:*)
	echo ${UNAME_MACHINE}-unknown-openbsd${UNAME_RELEASE}
	exit 0 ;;
    *:MicroBSD:*:*)
	echo ${UNAME_MACHINE}-unknown-microbsd${UNAME_RELEASE}
	exit 0 ;;
    alpha:OSF1:*:*)
	if test $UNAME_RELEASE = "V4.0"; then
		UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'`
	fi
	# A Vn.n version is a released version.
	# A Tn.n version is a released field test version.
	# A Xn.n version is an unreleased experimental baselevel.
	# 1.2 uses "1.2" for uname -r.
	eval $set_cc_for_build
	cat <<EOF >$dummy.s
	.data
\$Lformat:
	.byte 37,100,45,37,120,10,0	# "%d-%x\n"

	.text
	.globl main
................................................................................
	not \$1,\$18
	jsr \$26,printf
	ldgp \$29,0(\$26)
	mov 0,\$16
	jsr \$26,exit
	.end main
EOF
	$CC_FOR_BUILD -o $dummy $dummy.s 2>/dev/null

	if test "$?" = 0 ; then
		case `$dummy` in
			0-0)
				UNAME_MACHINE="alpha"
				;;
			1-0)
				UNAME_MACHINE="alphaev5"
				;;
			1-1)
................................................................................
				;;
			2-307)
				UNAME_MACHINE="alphaev67"
				;;
			2-1307)
				UNAME_MACHINE="alphaev68"
				;;
			3-1307)
				UNAME_MACHINE="alphaev7"
				;;
		esac
	fi

	echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[VTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
	exit 0 ;;
    Alpha\ *:Windows_NT*:*)
	# How do we know it's Interix rather than the generic POSIX subsystem?
	# Should we change UNAME_MACHINE based on the output of uname instead
	# of the specific Alpha model?
	echo alpha-pc-interix
................................................................................
	exit 0 ;;
    21064:Windows_NT:50:3)
	echo alpha-dec-winnt3.5
	exit 0 ;;
    Amiga*:UNIX_System_V:4.0:*)
	echo m68k-unknown-sysv4
	exit 0;;



    *:[Aa]miga[Oo][Ss]:*:*)
	echo ${UNAME_MACHINE}-unknown-amigaos
	exit 0 ;;
    *:[Mm]orph[Oo][Ss]:*:*)
	echo ${UNAME_MACHINE}-unknown-morphos















	exit 0 ;;
    *:OS/390:*:*)
	echo i370-ibm-openedition
	exit 0 ;;
    arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*)
	echo arm-acorn-riscix${UNAME_RELEASE}
	exit 0;;
................................................................................
	else
		echo pyramid-pyramid-bsd
	fi
	exit 0 ;;
    NILE*:*:*:dcosx)
	echo pyramid-pyramid-svr4
	exit 0 ;;
    DRS?6000:UNIX_SV:4.2*:7*)
	case `/usr/bin/uname -p` in
	    sparc) echo sparc-icl-nx7 && exit 0 ;;
	esac ;;
    sun4H:SunOS:5.*:*)
	echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
	exit 0 ;;
    sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*)
	echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
	exit 0 ;;
    i86pc:SunOS:5.*:*)
................................................................................
	# Japanese Language versions have a version number like `4.1.3-JL'.
	echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'`
	exit 0 ;;
    sun3*:SunOS:*:*)
	echo m68k-sun-sunos${UNAME_RELEASE}
	exit 0 ;;
    sun*:*:4.2BSD:*)
	UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null`
	test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3
	case "`/bin/arch`" in
	    sun3)
		echo m68k-sun-sunos${UNAME_RELEASE}
		;;
	    sun4)
		echo sparc-sun-sunos${UNAME_RELEASE}
		;;
	esac
	exit 0 ;;
    aushp:SunOS:*:*)
	echo sparc-auspex-sunos${UNAME_RELEASE}
	exit 0 ;;






    # The situation for MiNT is a little confusing.  The machine name
    # can be virtually everything (everything which is not
    # "atarist" or "atariste" at least should have a processor
    # > m68000).  The system name ranges from "MiNT" over "FreeMiNT"
    # to the lowercase version "mint" (or "freemint").  Finally
    # the system name "TOS" denotes a system which is actually not
    # MiNT.  But MiNT is downward compatible to TOS, so this should
................................................................................
        exit 0 ;;
    hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*)
        echo m68k-hades-mint${UNAME_RELEASE}
        exit 0 ;;
    *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*)
        echo m68k-unknown-mint${UNAME_RELEASE}
        exit 0 ;;












    powerpc:machten:*:*)
	echo powerpc-apple-machten${UNAME_RELEASE}
	exit 0 ;;
    RISC*:Mach:*:*)
	echo mips-dec-mach_bsd4.3
	exit 0 ;;
    RISC*:ULTRIX:*:*)
................................................................................
	#if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD)
	  printf ("mips-mips-riscos%sbsd\n", argv[1]); exit (0);
	#endif
	#endif
	  exit (-1);
	}
EOF
	$CC_FOR_BUILD -o $dummy $dummy.c \
	  && $dummy `echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` \
	  && exit 0

	echo mips-mips-riscos${UNAME_RELEASE}
	exit 0 ;;
    Motorola:PowerMAX_OS:*:*)
	echo powerpc-motorola-powermax
	exit 0 ;;
    Motorola:*:4.3:PL8-*)
	echo powerpc-harris-powermax
	exit 0 ;;
    Night_Hawk:*:*:PowerMAX_OS | Synergy:PowerMAX_OS:*:*)
	echo powerpc-harris-powermax
	exit 0 ;;
    Night_Hawk:Power_UNIX:*:*)
	echo powerpc-harris-powerunix
	exit 0 ;;
    m88k:CX/UX:7*:*)
	echo m88k-harris-cxux7
	exit 0 ;;
    m88k:*:4*:R4*)
................................................................................
			{
			if (!__power_pc())
				exit(1);
			puts("powerpc-ibm-aix3.2.5");
			exit(0);
			}
EOF
		$CC_FOR_BUILD -o $dummy $dummy.c && $dummy && exit 0

		echo rs6000-ibm-aix3.2.5
	elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then
		echo rs6000-ibm-aix3.2.4
	else
		echo rs6000-ibm-aix3.2
	fi
	exit 0 ;;
    *:AIX:*:[45])
	IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'`
	if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then
		IBM_ARCH=rs6000
	else
		IBM_ARCH=powerpc
	fi
	if [ -x /usr/bin/oslevel ] ; then
		IBM_REV=`/usr/bin/oslevel`
................................................................................
	exit 0 ;;
    9000/[34678]??:HP-UX:*:*)
	HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
	case "${UNAME_MACHINE}" in
	    9000/31? )            HP_ARCH=m68000 ;;
	    9000/[34]?? )         HP_ARCH=m68k ;;
	    9000/[678][0-9][0-9])


		if [ -x /usr/bin/getconf ]; then
		    sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null`
                    sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null`
                    case "${sc_cpu_version}" in
                      523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0
                      528) HP_ARCH="hppa1.1" ;; # CPU_PA_RISC1_1
                      532)                      # CPU_PA_RISC2_0
                        case "${sc_kernel_bits}" in
                          32) HP_ARCH="hppa2.0n" ;;
                          64) HP_ARCH="hppa2.0w" ;;
			  '') HP_ARCH="hppa2.0" ;;   # HP-UX 10.20
                        esac ;;
                    esac
		fi

		if [ "${HP_ARCH}" = "" ]; then
		    eval $set_cc_for_build
		    sed 's/^              //' << EOF >$dummy.c

              #define _HPUX_SOURCE
              #include <stdlib.h>
              #include <unistd.h>

              int main ()
              {
................................................................................
              	    puts ("hppa2.0"); break;
              #endif
              	default: puts ("hppa1.0"); break;
              	}
                  exit (0);
              }
EOF
		    (CCOPTS= $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null) && HP_ARCH=`$dummy`
		    test -z "$HP_ARCH" && HP_ARCH=hppa

		fi ;;
	esac
	if [ ${HP_ARCH} = "hppa2.0w" ]
	then
	    # avoid double evaluation of $set_cc_for_build
	    test -n "$CC_FOR_BUILD" || eval $set_cc_for_build
	    if echo __LP64__ | (CCOPTS= $CC_FOR_BUILD -E -) | grep __LP64__ >/dev/null
	    then
		HP_ARCH="hppa2.0w"
	    else
		HP_ARCH="hppa64"
	    fi
	fi
	echo ${HP_ARCH}-hp-hpux${HPUX_REV}
	exit 0 ;;
    ia64:HP-UX:*:*)
	HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
	echo ia64-hp-hpux${HPUX_REV}
	exit 0 ;;
    3050*:HI-UX:*:*)
................................................................................
	    }
	  else if (CPU_IS_HP_MC68K (cpu))
	    puts ("m68k-hitachi-hiuxwe2");
	  else puts ("unknown-hitachi-hiuxwe2");
	  exit (0);
	}
EOF
	$CC_FOR_BUILD -o $dummy $dummy.c && $dummy && exit 0

	echo unknown-hitachi-hiuxwe2
	exit 0 ;;
    9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* )
	echo hppa1.1-hp-bsd
	exit 0 ;;
    9000/8??:4.3bsd:*:*)
	echo hppa1.0-hp-bsd
................................................................................
	else
	    echo ${UNAME_MACHINE}-unknown-osf1
	fi
	exit 0 ;;
    parisc*:Lites*:*:*)
	echo hppa1.1-hp-lites
	exit 0 ;;



    C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*)
	echo c1-convex-bsd
        exit 0 ;;
    C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*)
	if getsysinfo -f scalar_acc
	then echo c32-convex-bsd
	else echo c2-convex-bsd
................................................................................
        exit 0 ;;
    C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*)
	echo c38-convex-bsd
        exit 0 ;;
    C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*)
	echo c4-convex-bsd
        exit 0 ;;



    CRAY*Y-MP:*:*:*)
	echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
	exit 0 ;;
    CRAY*[A-Z]90:*:*:*)
	echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \
	| sed -e 's/CRAY.*\([A-Z]90\)/\1/' \
	      -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \
	      -e 's/\.[^.]*$/.X/'
	exit 0 ;;
    CRAY*TS:*:*:*)
	echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
	exit 0 ;;



    CRAY*T3E:*:*:*)
	echo alphaev5-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
	exit 0 ;;
    CRAY*SV1:*:*:*)
	echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
	exit 0 ;;
    *:UNICOS/mp:*:*)
	echo nv1-cray-unicosmp${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' 
	exit 0 ;;
    F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*)
	FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
        FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
        FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'`
        echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
        exit 0 ;;



    i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*)
	echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE}
	exit 0 ;;
    sparc*:BSD/OS:*:*)
	echo sparc-unknown-bsdi${UNAME_RELEASE}
	exit 0 ;;
    *:BSD/OS:*:*)
	echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE}
	exit 0 ;;
    *:FreeBSD:*:*)
	# Determine whether the default compiler uses glibc.
	eval $set_cc_for_build
	sed 's/^	//' << EOF >$dummy.c
	#include <features.h>
	#if __GLIBC__ >= 2
	LIBC=gnu
	#else
	LIBC=
	#endif
EOF
	eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^LIBC=`
	echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`${LIBC:+-$LIBC}



	exit 0 ;;
    i*:CYGWIN*:*)
	echo ${UNAME_MACHINE}-pc-cygwin
	exit 0 ;;
    i*:MINGW*:*)
	echo ${UNAME_MACHINE}-pc-mingw32
	exit 0 ;;
    i*:PW*:*)
	echo ${UNAME_MACHINE}-pc-pw32
	exit 0 ;;
    x86:Interix*:3*)
	echo i586-pc-interix3
	exit 0 ;;
    [345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*)
	echo i${UNAME_MACHINE}-pc-mks
	exit 0 ;;
    i*:Windows_NT*:* | Pentium*:Windows_NT*:*)
	# How do we know it's Interix rather than the generic POSIX subsystem?
	# It also conflicts with pre-2.0 versions of AT&T UWIN. Should we
	# UNAME_MACHINE based on the output of uname instead of i386?
	echo i586-pc-interix
	exit 0 ;;
    i*:UWIN*:*)
	echo ${UNAME_MACHINE}-pc-uwin
	exit 0 ;;
    p*:CYGWIN*:*)
	echo powerpcle-unknown-cygwin
	exit 0 ;;
................................................................................
    i*86:Minix:*:*)
	echo ${UNAME_MACHINE}-pc-minix
	exit 0 ;;
    arm*:Linux:*:*)
	echo ${UNAME_MACHINE}-unknown-linux-gnu
	exit 0 ;;
    ia64:Linux:*:*)
	echo ${UNAME_MACHINE}-unknown-linux-gnu
	exit 0 ;;
    m68*:Linux:*:*)
	echo ${UNAME_MACHINE}-unknown-linux-gnu
	exit 0 ;;
    mips:Linux:*:*)
	eval $set_cc_for_build
	sed 's/^	//' << EOF >$dummy.c
	#undef CPU
	#undef mips
	#undef mipsel
	#if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL)
	CPU=mipsel
	#else
	#if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB)
	CPU=mips
	#else
	CPU=
	#endif
	#endif
EOF
	eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^CPU=`
	test x"${CPU}" != x && echo "${CPU}-unknown-linux-gnu" && exit 0
	;;
    mips64:Linux:*:*)
	eval $set_cc_for_build
	sed 's/^	//' << EOF >$dummy.c
	#undef CPU
	#undef mips64
	#undef mips64el
	#if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL)
	CPU=mips64el
	#else
	#if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB)
	CPU=mips64
	#else
	CPU=
	#endif
	#endif
EOF
	eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^CPU=`
	test x"${CPU}" != x && echo "${CPU}-unknown-linux-gnu" && exit 0
	;;
    ppc:Linux:*:*)
	echo powerpc-unknown-linux-gnu
	exit 0 ;;
    ppc64:Linux:*:*)
	echo powerpc64-unknown-linux-gnu
	exit 0 ;;
................................................................................
    x86_64:Linux:*:*)
	echo x86_64-unknown-linux-gnu
	exit 0 ;;
    i*86:Linux:*:*)
	# The BFD linker knows what the default object file format is, so
	# first see if it will tell us. cd to the root directory to prevent
	# problems with other programs or directories called `ld' in the path.
	# Set LC_ALL=C to ensure ld outputs messages in English.
	ld_supported_targets=`cd /; LC_ALL=C ld --help 2>&1 \
			 | sed -ne '/supported targets:/!d
				    s/[ 	][ 	]*/ /g
				    s/.*supported targets: *//
				    s/ .*//
				    p'`
        case "$ld_supported_targets" in
	  elf32-i386)
		TENTATIVE="${UNAME_MACHINE}-pc-linux-gnu"
		;;
	  a.out-i386-linux)
		echo "${UNAME_MACHINE}-pc-linux-gnuaout"
		exit 0 ;;
	  coff-i386)
		echo "${UNAME_MACHINE}-pc-linux-gnucoff"
		exit 0 ;;
	  "")
		# Either a pre-BFD a.out linker (linux-gnuoldld) or
		# one that does not give us useful --help.
		echo "${UNAME_MACHINE}-pc-linux-gnuoldld"
		exit 0 ;;
	esac
	# Determine whether the default compiler is a.out or elf
	eval $set_cc_for_build
	sed 's/^	//' << EOF >$dummy.c
	#include <features.h>






	#ifdef __ELF__
	# ifdef __GLIBC__
	#  if __GLIBC__ >= 2

	LIBC=gnu
	#  else

	LIBC=gnulibc1
	#  endif
	# else

	LIBC=gnulibc1
	# endif
	#else

	#ifdef __INTEL_COMPILER
	LIBC=gnu
	#else
	LIBC=gnuaout
	#endif


	#endif
EOF


	eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^LIBC=`
	test x"${LIBC}" != x && echo "${UNAME_MACHINE}-pc-linux-${LIBC}" && exit 0
	test x"${TENTATIVE}" != x && echo "${TENTATIVE}" && exit 0
	;;
    i*86:DYNIX/ptx:4*:*)
	# ptx 4.0 does uname -s correctly, with DYNIX/ptx in there.
	# earlier versions are messed up and put the nodename in both
	# sysname and nodename.
	echo i386-sequent-sysv4
................................................................................
        # Unixware is an offshoot of SVR4, but it has its own version
        # number series starting with 2...
        # I am not positive that other SVR4 systems won't match this,
	# I just have to hope.  -- rms.
        # Use sysv4.2uw... so that sysv4* matches it.
	echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION}
	exit 0 ;;
    i*86:OS/2:*:*)
	# If we were able to find `uname', then EMX Unix compatibility
	# is probably installed.
	echo ${UNAME_MACHINE}-pc-os2-emx
	exit 0 ;;
    i*86:XTS-300:*:STOP)
	echo ${UNAME_MACHINE}-unknown-stop
	exit 0 ;;
    i*86:atheos:*:*)
	echo ${UNAME_MACHINE}-unknown-atheos
	exit 0 ;;
    i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.0*:*)
	echo i386-unknown-lynxos${UNAME_RELEASE}
	exit 0 ;;
    i*86:*DOS:*:*)
	echo ${UNAME_MACHINE}-pc-msdosdjgpp
	exit 0 ;;
    i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*)
	UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'`
	if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then
		echo ${UNAME_MACHINE}-univel-sysv${UNAME_REL}
	else
		echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL}
	fi
................................................................................
	echo ${UNAME_MACHINE}-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION}
	exit 0 ;;
    i*86:*:3.2:*)
	if test -f /usr/options/cb.name; then
		UNAME_REL=`sed -n 's/.*Version //p' </usr/options/cb.name`
		echo ${UNAME_MACHINE}-pc-isc$UNAME_REL
	elif /bin/uname -X 2>/dev/null >/dev/null ; then
		UNAME_REL=`(/bin/uname -X|grep Release|sed -e 's/.*= //')`
		(/bin/uname -X|grep i80486 >/dev/null) && UNAME_MACHINE=i486
		(/bin/uname -X|grep '^Machine.*Pentium' >/dev/null) \
			&& UNAME_MACHINE=i586
		(/bin/uname -X|grep '^Machine.*Pent *II' >/dev/null) \
			&& UNAME_MACHINE=i686
		(/bin/uname -X|grep '^Machine.*Pentium Pro' >/dev/null) \
			&& UNAME_MACHINE=i686
		echo ${UNAME_MACHINE}-pc-sco$UNAME_REL
	else
		echo ${UNAME_MACHINE}-pc-sysv32
	fi
	exit 0 ;;



    pc:*:*:*)
	# Left here for compatibility:
        # uname -m prints for DJGPP always 'pc', but it prints nothing about
        # the processor, so we play safe by assuming i386.
	echo i386-pc-msdosdjgpp
        exit 0 ;;
    Intel:Mach:3*:*)
................................................................................
	else # Add other i860-SVR4 vendors below as they are discovered.
	  echo i860-unknown-sysv${UNAME_RELEASE}  # Unknown i860-SVR4
	fi
	exit 0 ;;
    mini*:CTIX:SYS*5:*)
	# "miniframe"
	echo m68010-convergent-sysv
	exit 0 ;;
    mc68k:UNIX:SYSTEM5:3.51m)
	echo m68k-convergent-sysv
	exit 0 ;;
    M680?0:D-NIX:5.3:*)
	echo m68k-diab-dnix
	exit 0 ;;
    M68*:*:R3V[567]*:*)
	test -r /sysV68 && echo 'm68k-motorola-sysv' && exit 0 ;;
    3[34]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0)
	OS_REL=''
	test -r /etc/.relid \
	&& OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
	/bin/uname -p 2>/dev/null | grep 86 >/dev/null \
	  && echo i486-ncr-sysv4.3${OS_REL} && exit 0
	/bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \
	  && echo i586-ncr-sysv4.3${OS_REL} && exit 0 ;;
................................................................................
          && echo i486-ncr-sysv4 && exit 0 ;;
    m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*)
	echo m68k-unknown-lynxos${UNAME_RELEASE}
	exit 0 ;;
    mc68030:UNIX_System_V:4.*:*)
	echo m68k-atari-sysv4
	exit 0 ;;



    TSUNAMI:LynxOS:2.*:*)
	echo sparc-unknown-lynxos${UNAME_RELEASE}
	exit 0 ;;
    rs6000:LynxOS:2.*:*)
	echo rs6000-unknown-lynxos${UNAME_RELEASE}
	exit 0 ;;
    PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.0*:*)
................................................................................
	exit 0 ;;
    SX-4:SUPER-UX:*:*)
	echo sx4-nec-superux${UNAME_RELEASE}
	exit 0 ;;
    SX-5:SUPER-UX:*:*)
	echo sx5-nec-superux${UNAME_RELEASE}
	exit 0 ;;
    SX-6:SUPER-UX:*:*)
	echo sx6-nec-superux${UNAME_RELEASE}
	exit 0 ;;
    Power*:Rhapsody:*:*)
	echo powerpc-apple-rhapsody${UNAME_RELEASE}
	exit 0 ;;
    *:Rhapsody:*:*)
	echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE}
	exit 0 ;;
    *:Darwin:*:*)
	case `uname -p` in
	    *86) UNAME_PROCESSOR=i686 ;;
	    powerpc) UNAME_PROCESSOR=powerpc ;;
	esac
	echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE}
	exit 0 ;;
    *:procnto*:*:* | *:QNX:[0123456789]*:*)

	UNAME_PROCESSOR=`uname -p`
	if test "$UNAME_PROCESSOR" = "x86"; then
		UNAME_PROCESSOR=i386
		UNAME_MACHINE=pc
	fi
	echo ${UNAME_PROCESSOR}-${UNAME_MACHINE}-nto-qnx${UNAME_RELEASE}
	exit 0 ;;
    *:QNX:*:4*)
	echo i386-pc-qnx
	exit 0 ;;
    NSR-[DGKLNPTVW]:NONSTOP_KERNEL:*:*)
	echo nsr-tandem-nsk${UNAME_RELEASE}
	exit 0 ;;
    *:NonStop-UX:*:*)
	echo mips-compaq-nonstopux
	exit 0 ;;
    BS2000:POSIX*:*:*)
	echo bs2000-siemens-sysv
................................................................................
	if test "$cputype" = "386"; then
	    UNAME_MACHINE=i386
	else
	    UNAME_MACHINE="$cputype"
	fi
	echo ${UNAME_MACHINE}-unknown-plan9
	exit 0 ;;





    *:TOPS-10:*:*)
	echo pdp10-unknown-tops10
	exit 0 ;;
    *:TENEX:*:*)
	echo pdp10-unknown-tenex
	exit 0 ;;
    KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*)
................................................................................
	exit 0 ;;
    *:TOPS-20:*:*)
	echo pdp10-unknown-tops20
	exit 0 ;;
    *:ITS:*:*)
	echo pdp10-unknown-its
	exit 0 ;;






esac

#echo '(No uname command or uname output not recognized.)' 1>&2
#echo "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" 1>&2

eval $set_cc_for_build
cat >$dummy.c <<EOF
................................................................................
  printf ("i860-alliant-bsd\n"); exit (0);
#endif

  exit (1);
}
EOF

$CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null && $dummy && exit 0


# Apollos put the system type in the environment.

test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit 0; }

# Convex versions that predate uname can use getsysinfo(1)

#! /bin/sh
# Configuration validation subroutine script.
#   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001
#   Free Software Foundation, Inc.

timestamp='2001-09-07'

# This file is (in principle) common to ALL GNU software.
# The presence of a machine in this file suggests that SOME GNU software
# can handle that machine.  It does not imply ALL GNU software can.
#
# This file is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
................................................................................
# Boston, MA 02111-1307, USA.

# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
# configuration script generated by Autoconf, you may include it under
# the same distribution terms that you use for the rest of that program.

# Please send patches to <config-patches@gnu.org>.

#
# Configuration subroutine to validate and canonicalize a configuration type.
# Supply the specified configuration type as an argument.
# If it is invalid, we print an error message on stderr and exit with code 1.
# Otherwise, we print the canonical config type on stdout and succeed.

# This file is supposed to be the same for all GNU packages
................................................................................
    exit 1;;
esac

# Separate what the user gave into CPU-COMPANY and OS or KERNEL-OS (if any).
# Here we must recognize all the valid KERNEL-OS combinations.
maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'`
case $maybe_os in
  nto-qnx* | linux-gnu* | storm-chaos* | os2-emx* | windows32-*)
    os=-$maybe_os
    basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`
    ;;
  *)
    basic_machine=`echo $1 | sed 's/-[^-]*$//'`
    if [ $basic_machine != $1 ]
    then os=`echo $1 | sed 's/.*-/-/'`
................................................................................
# Decode aliases for certain CPU-COMPANY combinations.
case $basic_machine in
	# Recognize the basic CPU types without company name.
	# Some are omitted here because they have special meanings below.
	1750a | 580 \
	| a29k \
	| alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \

	| arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr \
	| c4x | clipper \
	| d10v | d30v | dsp16xx \
	| fr30 \
	| h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \
	| i370 | i860 | i960 | ia64 \

	| m32r | m68000 | m68k | m88k | mcore \




	| mips16 | mips64 | mips64el | mips64orion | mips64orionel \
	| mips64vr4100 | mips64vr4100el | mips64vr4300 \

	| mips64vr4300el | mips64vr5000 | mips64vr5000el \
	| mipsbe | mipseb | mipsel | mipsle | mipstx39 | mipstx39el \
	| mipsisa32 \





	| mn10200 | mn10300 \

	| ns16k | ns32k \
	| openrisc \
	| pdp10 | pdp11 | pj | pjl \
	| powerpc | powerpc64 | powerpc64le | powerpcle | ppcbe \
	| pyramid \
	| s390 | s390x \
	| sh | sh[34] | sh[34]eb | shbe | shle \
	| sparc | sparc64 | sparclet | sparclite | sparcv9 | sparcv9b \
	| stormy16 | strongarm \
	| tahoe | thumb | tic80 | tron \
	| v850 \
	| we32k \
	| x86 | xscale \
	| z8k)
		basic_machine=$basic_machine-unknown
		;;
	m6811 | m68hc11 | m6812 | m68hc12)
		# Motorola 68HC11/12.
		basic_machine=$basic_machine-unknown
		os=-none
................................................................................
		echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
		exit 1
		;;
	# Recognize the basic CPU types with company name.
	580-* \
	| a29k-* \
	| alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \

	| alphapca5[67]-* | arc-* \
	| arm-*  | armbe-* | armle-* | armv*-* \

	| bs2000-* \
	| c[123]* | c30-* | [cjt]90-* | c54x-* \
	| clipper-* | cray2-* | cydra-* \
	| d10v-* | d30v-* \
	| elxsi-* \
	| f30[01]-* | f700-* | fr30-* | fx80-* \
	| h8300-* | h8500-* \
	| hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \
	| i*86-* | i860-* | i960-* | ia64-* \

	| m32r-* \
	| m68000-* | m680[01234]0-* | m68360-* | m683?2-* | m68k-* \
	| m88110-* | m88k-* | mcore-* \


	| mips-* | mips16-* | mips64-* | mips64el-* | mips64orion-* \


	| mips64orionel-* | mips64vr4100-* | mips64vr4100el-* \
	| mips64vr4300-* | mips64vr4300el-* | mipsbe-* | mipseb-* \






	| mipsle-* | mipsel-* | mipstx39-* | mipstx39el-* \

	| none-* | np1-* | ns16k-* | ns32k-* \
	| orion-* \
	| pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \
	| powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* | ppcbe-* \
	| pyramid-* \
	| romp-* | rs6000-* \
	| s390-* | s390x-* \
	| sh-* | sh[34]-* | sh[34]eb-* | shbe-* | shle-* \
	| sparc-* | sparc64-* | sparc86x-* | sparclite-* \
	| sparcv9-* | sparcv9b-* | stormy16-* | strongarm-* | sv1-* \
	| t3e-* | tahoe-* | thumb-* | tic30-* | tic54x-* | tic80-* | tron-* \
	| v850-* | vax-* \
	| we32k-* \
	| x86-* | x86_64-* | xmp-* | xps100-* | xscale-* \

	| ymp-* \
	| z8k-*)
		;;
	# Recognize the various machine names and aliases which stand
	# for a CPU type and a company and sometimes even an OS.
	386bsd)
		basic_machine=i386-unknown
................................................................................
		basic_machine=m68k-apple
		os=-aux
		;;
	balance)
		basic_machine=ns32k-sequent
		os=-dynix
		;;




	convex-c1)
		basic_machine=c1-convex
		os=-bsd
		;;
	convex-c2)
		basic_machine=c2-convex
		os=-bsd
................................................................................
		basic_machine=c34-convex
		os=-bsd
		;;
	convex-c38)
		basic_machine=c38-convex
		os=-bsd
		;;
	cray | ymp)
		basic_machine=ymp-cray
		os=-unicos
		;;
	cray2)
		basic_machine=cray2-cray
		os=-unicos
		;;
	[cjt]90)
		basic_machine=${basic_machine}-cray
		os=-unicos
		;;
	crds | unos)
		basic_machine=m68k-crds
		;;
	cris | cris-* | etrax*)
		basic_machine=cris-axis
		;;
	da30 | da30-*)
		basic_machine=m68k-da30
		;;
	decstation | decstation-3100 | pmax | pmax-* | pmin | dec3100 | decstatn)
		basic_machine=mips-dec








		;;
	delta | 3300 | motorola-3300 | motorola-delta \
	      | 3300-motorola | delta-motorola)
		basic_machine=m68k-motorola
		;;
	delta88)
		basic_machine=m88k-motorola
................................................................................
	miniframe)
		basic_machine=m68000-convergent
		;;
	*mint | -mint[0-9]* | *MiNT | *MiNT[0-9]*)
		basic_machine=m68k-atari
		os=-mint
		;;
	mipsel*-linux*)
		basic_machine=mipsel-unknown
		os=-linux-gnu
		;;
	mips*-linux*)
		basic_machine=mips-unknown
		os=-linux-gnu
		;;
	mips3*-*)
		basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`
		;;
	mips3*)
		basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown
		;;
	mmix*)
................................................................................
		basic_machine=mmix-knuth
		os=-mmixware
		;;
	monitor)
		basic_machine=m68k-rom68k
		os=-coff
		;;




	msdos)
		basic_machine=i386-pc
		os=-msdos
		;;
	mvs)
		basic_machine=i370-ibm
		os=-mvs
................................................................................
	nonstopux)
		basic_machine=mips-compaq
		os=-nonstopux
		;;
	np1)
		basic_machine=np1-gould
		;;




	nsr-tandem)
		basic_machine=nsr-tandem
		;;
	op50n-* | op60c-*)
		basic_machine=hppa1.1-oki
		os=-proelf




		;;
	OSE68000 | ose68000)
		basic_machine=m68000-ericsson
		os=-ose
		;;
	os68k)
		basic_machine=m68k-none
................................................................................
		;;
	pbd)
		basic_machine=sparc-tti
		;;
	pbb)
		basic_machine=m68k-tti
		;;
        pc532 | pc532-*)
		basic_machine=ns32k-pc532
		;;
	pentium | p5 | k5 | k6 | nexgen)
		basic_machine=i586-pc
		;;
	pentiumpro | p6 | 6x86 | athlon)
		basic_machine=i686-pc
		;;
	pentiumii | pentium2)
		basic_machine=i686-pc
		;;
	pentium-* | p5-* | k5-* | k6-* | nexgen-*)
		basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'`
		;;
	pentiumpro-* | p6-* | 6x86-* | athlon-*)
		basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
		;;
	pentiumii-* | pentium2-*)
		basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
................................................................................
		;;
	pn)
		basic_machine=pn-gould
		;;
	power)	basic_machine=power-ibm
		;;
	ppc)	basic_machine=powerpc-unknown
	        ;;
	ppc-*)	basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'`
		;;
	ppcle | powerpclittle | ppc-le | powerpc-little)
		basic_machine=powerpcle-unknown
	        ;;
	ppcle-* | powerpclittle-*)
		basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'`
		;;
	ppc64)	basic_machine=powerpc64-unknown
	        ;;
	ppc64-*) basic_machine=powerpc64-`echo $basic_machine | sed 's/^[^-]*-//'`
		;;
	ppc64le | powerpc64little | ppc64-le | powerpc64-little)
		basic_machine=powerpc64le-unknown
	        ;;
	ppc64le-* | powerpc64little-*)
		basic_machine=powerpc64le-`echo $basic_machine | sed 's/^[^-]*-//'`
		;;
	ps2)
		basic_machine=i386-ibm
		;;
	pw32)
................................................................................
		;;
	rm[46]00)
		basic_machine=mips-siemens
		;;
	rtpc | rtpc-*)
		basic_machine=romp-ibm
		;;






	sa29200)
		basic_machine=a29k-amd
		os=-udi
		;;






	sequent)
		basic_machine=i386-sequent
		;;
	sh)
		basic_machine=sh-hitachi
		os=-hms
		;;
	sparclite-wrs)
		basic_machine=sparclite-wrs
		os=-vxworks
		;;
	sps7)
		basic_machine=m68k-bull
		os=-sysv2
		;;
................................................................................
		os=-unicos
		;;
	symmetry)
		basic_machine=i386-sequent
		os=-dynix
		;;
	t3e)




		basic_machine=t3e-cray
		os=-unicos




		;;
	tic54x | c54x*)
		basic_machine=tic54x-unknown
		os=-coff
		;;
	tx39)
		basic_machine=mipstx39-unknown
		;;
	tx39el)
		basic_machine=mipstx39el-unknown
		;;




	tower | tower-32)
		basic_machine=m68k-ncr
		;;
	udi29k)
		basic_machine=a29k-amd
		os=-udi
		;;
................................................................................
		os=-sysv
		;;
	vms)
		basic_machine=vax-dec
		os=-vms
		;;
	vpp*|vx|vx-*)
               basic_machine=f301-fujitsu
               ;;
	vxworks960)
		basic_machine=i960-wrs
		os=-vxworks
		;;
	vxworks68)
		basic_machine=m68k-wrs
		os=-vxworks
................................................................................
		basic_machine=w65-wdc
		os=-none
		;;
	w89k-*)
		basic_machine=hppa1.1-winbond
		os=-proelf
		;;
	windows32)
		basic_machine=i386-pc
		os=-windows32-msvcrt
		;;
	xmp)
		basic_machine=xmp-cray
		os=-unicos
		;;
        xps | xps100)
		basic_machine=xps100-honeywell
		;;
	z8k-*-coff)
		basic_machine=z8k-unknown
		os=-sim
		;;
	none)
		basic_machine=none-none
		os=-none
................................................................................
		basic_machine=hppa1.1-winbond
		;;
	op50n)
		basic_machine=hppa1.1-oki
		;;
	op60c)
		basic_machine=hppa1.1-oki
		;;
	mips)
		if [ x$os = x-linux-gnu ]; then
			basic_machine=mips-unknown
		else
			basic_machine=mips-mips
		fi
		;;
	romp)
		basic_machine=romp-ibm
		;;
	rs6000)
		basic_machine=rs6000-ibm
		;;
................................................................................
		;;
	pdp11)
		basic_machine=pdp11-dec
		;;
	we32k)
		basic_machine=we32k-att
		;;
	sh3 | sh4 | sh3eb | sh4eb)
		basic_machine=sh-unknown
		;;



	sparc | sparcv9 | sparcv9b)
		basic_machine=sparc-sun
		;;
        cydra)
		basic_machine=cydra-cydrome
		;;
	orion)
		basic_machine=orion-highlevel
		;;
	orion105)
		basic_machine=clipper-highlevel
................................................................................
		;;
	mac | mpw | mac-mpw)
		basic_machine=m68k-apple
		;;
	pmac | pmac-mpw)
		basic_machine=powerpc-apple
		;;
	c4x*)
		basic_machine=c4x-none
		os=-coff
		;;
	*-unknown)
		# Make sure to match an already-canonicalized machine name.
		;;
	*)
		echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
		exit 1
		;;
................................................................................
	      | -hiux* | -386bsd* | -netbsd* | -openbsd* | -freebsd* | -riscix* \
	      | -lynxos* | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \
	      | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \
	      | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \
	      | -chorusos* | -chorusrdb* \
	      | -cygwin* | -pe* | -psos* | -moss* | -proelf* | -rtems* \
	      | -mingw32* | -linux-gnu* | -uxpv* | -beos* | -mpeix* | -udk* \
	      | -interix* | -uwin* | -rhapsody* | -darwin* | -opened* \
	      | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \
	      | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \
	      | -os2* | -vos*)


	# Remember, each alternative MUST END IN *, to match a version number.
		;;
	-qnx*)
		case $basic_machine in
		    x86-* | i*86-*)
			;;
		    *)
			os=-nto$os
			;;
		esac
		;;


	-nto*)
		os=-nto-qnx

		;;
	-sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \
	      | -windows* | -osx | -abug | -netware* | -os9* | -beos* \
	      | -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*)
		;;
	-mac*)
		os=`echo $os | sed -e 's|mac|macos|'`
................................................................................
		;;
	-dynix*)
		os=-bsd
		;;
	-acis*)
		os=-aos
		;;



	-386bsd)
		os=-bsd
		;;
	-ctix* | -uts*)
		os=-sysv
		;;



	-ns2 )
	        os=-nextstep2
		;;
	-nsk*)
		os=-nsk
		;;
	# Preserve the version number of sinix5.
	-sinix5.*)
		os=`echo $os | sed -e 's|sinix|sysv|'`
................................................................................
		;;
	-es1800*)
		os=-ose
		;;
	-xenix)
		os=-xenix
		;;
        -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*)
	        os=-mint
		;;
	-none)
		;;
	*)
		# Get rid of the `-' at the beginning of $os.
		os=`echo $os | sed 's/[^-]*-//'`
		echo Invalid configuration \`$1\': system \`$os\' not recognized 1>&2
................................................................................
		;;
	arm*-rebel)
		os=-linux
		;;
	arm*-semi)
		os=-aout
		;;

	pdp10-*)
		os=-tops20
		;;
        pdp11-*)
		os=-none
		;;
	*-dec | vax-*)
		os=-ultrix4.2
		;;
	m68*-apollo)
		os=-domain
................................................................................
		;;
	mips*-cisco)
		os=-elf
		;;
	mips*-*)
		os=-elf
		;;



	*-tti)	# must be before sparc entry or we get the wrong os.
		os=-sysv3
		;;
	sparc-* | *-sun)
		os=-sunos4.1.1
		;;
	*-be)
................................................................................
		;;
	i370-*)
		os=-mvs
		;;
	*-next)
		os=-nextstep3
		;;
        *-gould)
		os=-sysv
		;;
        *-highlevel)
		os=-bsd
		;;
	*-encore)
		os=-bsd
		;;
        *-sgi)
		os=-irix
		;;
        *-siemens)
		os=-sysv4
		;;
	*-masscomp)
		os=-rtu
		;;
	f30[01]-fujitsu | f700-fujitsu)
		os=-uxpv
................................................................................
				;;
			-mvs* | -opened*)
				vendor=ibm
				;;
			-ptx*)
				vendor=sequent
				;;
			-vxsim* | -vxworks*)
				vendor=wrs
				;;
			-aux*)
				vendor=apple
				;;
			-hms*)
				vendor=hitachi

#! /bin/sh
# Configuration validation subroutine script.
#   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
#   2000, 2001, 2002, 2003 Free Software Foundation, Inc.

timestamp='2003-01-03'

# This file is (in principle) common to ALL GNU software.
# The presence of a machine in this file suggests that SOME GNU software
# can handle that machine.  It does not imply ALL GNU software can.
#
# This file is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
................................................................................
# Boston, MA 02111-1307, USA.

# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
# configuration script generated by Autoconf, you may include it under
# the same distribution terms that you use for the rest of that program.

# Please send patches to <config-patches@gnu.org>.  Submit a context
# diff and a properly formatted ChangeLog entry.
#
# Configuration subroutine to validate and canonicalize a configuration type.
# Supply the specified configuration type as an argument.
# If it is invalid, we print an error message on stderr and exit with code 1.
# Otherwise, we print the canonical config type on stdout and succeed.

# This file is supposed to be the same for all GNU packages
................................................................................
    exit 1;;
esac

# Separate what the user gave into CPU-COMPANY and OS or KERNEL-OS (if any).
# Here we must recognize all the valid KERNEL-OS combinations.
maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'`
case $maybe_os in
  nto-qnx* | linux-gnu* | freebsd*-gnu* | netbsd*-gnu* | storm-chaos* | os2-emx* | rtmk-nova*)
    os=-$maybe_os
    basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`
    ;;
  *)
    basic_machine=`echo $1 | sed 's/-[^-]*$//'`
    if [ $basic_machine != $1 ]
    then os=`echo $1 | sed 's/.*-/-/'`
................................................................................
# Decode aliases for certain CPU-COMPANY combinations.
case $basic_machine in
	# Recognize the basic CPU types without company name.
	# Some are omitted here because they have special meanings below.
	1750a | 580 \
	| a29k \
	| alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \
	| alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \
	| arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr \
	| clipper \
	| d10v | d30v | dlx | dsp16xx \
	| fr30 | frv \
	| h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \
	| i370 | i860 | i960 | ia64 \
	| ip2k \
	| m32r | m68000 | m68k | m88k | mcore \
	| mips | mipsbe | mipseb | mipsel | mipsle \
	| mips16 \
	| mips64 | mips64el \
	| mips64vr | mips64vrel \
	| mips64orion | mips64orionel \
	| mips64vr4100 | mips64vr4100el \
	| mips64vr4300 | mips64vr4300el \
	| mips64vr5000 | mips64vr5000el \

	| mipsisa32 | mipsisa32el \
	| mipsisa32r2 | mipsisa32r2el \
	| mipsisa64 | mipsisa64el \
	| mipsisa64sb1 | mipsisa64sb1el \
	| mipsisa64sr71k | mipsisa64sr71kel \
	| mipstx39 | mipstx39el \
	| mn10200 | mn10300 \
	| msp430 \
	| ns16k | ns32k \
	| openrisc | or32 \
	| pdp10 | pdp11 | pj | pjl \
	| powerpc | powerpc64 | powerpc64le | powerpcle | ppcbe \
	| pyramid \
	| sh | sh[1234] | sh3e | sh[34]eb | shbe | shle | sh[1234]le | sh3ele \
	| sh64 | sh64le \
	| sparc | sparc64 | sparc86x | sparclet | sparclite | sparcv9 | sparcv9b \
	| strongarm \
	| tahoe | thumb | tic80 | tron \
	| v850 | v850e \
	| we32k \
	| x86 | xscale | xstormy16 | xtensa \
	| z8k)
		basic_machine=$basic_machine-unknown
		;;
	m6811 | m68hc11 | m6812 | m68hc12)
		# Motorola 68HC11/12.
		basic_machine=$basic_machine-unknown
		os=-none
................................................................................
		echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
		exit 1
		;;
	# Recognize the basic CPU types with company name.
	580-* \
	| a29k-* \
	| alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \
	| alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \
	| alphapca5[67]-* | alpha64pca5[67]-* | arc-* \
	| arm-*  | armbe-* | armle-* | armeb-* | armv*-* \
	| avr-* \
	| bs2000-* \
	| c[123]* | c30-* | [cjt]90-* | c4x-* | c54x-* \
	| clipper-* | cydra-* \
	| d10v-* | d30v-* | dlx-* \
	| elxsi-* \
	| f30[01]-* | f700-* | fr30-* | frv-* | fx80-* \
	| h8300-* | h8500-* \
	| hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \
	| i*86-* | i860-* | i960-* | ia64-* \
	| ip2k-* \
	| m32r-* \
	| m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \
	| m88110-* | m88k-* | mcore-* \
	| mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \
	| mips16-* \
	| mips64-* | mips64el-* \
	| mips64vr-* | mips64vrel-* \
	| mips64orion-* | mips64orionel-* \
	| mips64vr4100-* | mips64vr4100el-* \
	| mips64vr4300-* | mips64vr4300el-* \
	| mips64vr5000-* | mips64vr5000el-* \
	| mipsisa32-* | mipsisa32el-* \
	| mipsisa32r2-* | mipsisa32r2el-* \
	| mipsisa64-* | mipsisa64el-* \
	| mipsisa64sb1-* | mipsisa64sb1el-* \
	| mipsisa64sr71k-* | mipsisa64sr71kel-* \
	| mipstx39-* | mipstx39el-* \
	| msp430-* \
	| none-* | np1-* | nv1-* | ns16k-* | ns32k-* \
	| orion-* \
	| pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \
	| powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* | ppcbe-* \
	| pyramid-* \
	| romp-* | rs6000-* \
	| sh-* | sh[1234]-* | sh3e-* | sh[34]eb-* | shbe-* \
	| shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \
	| sparc-* | sparc64-* | sparc86x-* | sparclet-* | sparclite-* \
	| sparcv9-* | sparcv9b-* | strongarm-* | sv1-* | sx?-* \
	| tahoe-* | thumb-* | tic30-* | tic4x-* | tic54x-* | tic80-* | tron-* \
	| v850-* | v850e-* | vax-* \
	| we32k-* \
	| x86-* | x86_64-* | xps100-* | xscale-* | xstormy16-* \
	| xtensa-* \
	| ymp-* \
	| z8k-*)
		;;
	# Recognize the various machine names and aliases which stand
	# for a CPU type and a company and sometimes even an OS.
	386bsd)
		basic_machine=i386-unknown
................................................................................
		basic_machine=m68k-apple
		os=-aux
		;;
	balance)
		basic_machine=ns32k-sequent
		os=-dynix
		;;
	c90)
		basic_machine=c90-cray
		os=-unicos
		;;
	convex-c1)
		basic_machine=c1-convex
		os=-bsd
		;;
	convex-c2)
		basic_machine=c2-convex
		os=-bsd
................................................................................
		basic_machine=c34-convex
		os=-bsd
		;;
	convex-c38)
		basic_machine=c38-convex
		os=-bsd
		;;
	cray | j90)
		basic_machine=j90-cray








		os=-unicos
		;;
	crds | unos)
		basic_machine=m68k-crds
		;;
	cris | cris-* | etrax*)
		basic_machine=cris-axis
		;;
	da30 | da30-*)
		basic_machine=m68k-da30
		;;
	decstation | decstation-3100 | pmax | pmax-* | pmin | dec3100 | decstatn)
		basic_machine=mips-dec
		;;
	decsystem10* | dec10*)
		basic_machine=pdp10-dec
		os=-tops10
		;;
	decsystem20* | dec20*)
		basic_machine=pdp10-dec
		os=-tops20
		;;
	delta | 3300 | motorola-3300 | motorola-delta \
	      | 3300-motorola | delta-motorola)
		basic_machine=m68k-motorola
		;;
	delta88)
		basic_machine=m88k-motorola
................................................................................
	miniframe)
		basic_machine=m68000-convergent
		;;
	*mint | -mint[0-9]* | *MiNT | *MiNT[0-9]*)
		basic_machine=m68k-atari
		os=-mint
		;;








	mips3*-*)
		basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`
		;;
	mips3*)
		basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown
		;;
	mmix*)
................................................................................
		basic_machine=mmix-knuth
		os=-mmixware
		;;
	monitor)
		basic_machine=m68k-rom68k
		os=-coff
		;;
	morphos)
		basic_machine=powerpc-unknown
		os=-morphos
		;;
	msdos)
		basic_machine=i386-pc
		os=-msdos
		;;
	mvs)
		basic_machine=i370-ibm
		os=-mvs
................................................................................
	nonstopux)
		basic_machine=mips-compaq
		os=-nonstopux
		;;
	np1)
		basic_machine=np1-gould
		;;
	nv1)
		basic_machine=nv1-cray
		os=-unicosmp
		;;
	nsr-tandem)
		basic_machine=nsr-tandem
		;;
	op50n-* | op60c-*)
		basic_machine=hppa1.1-oki
		os=-proelf
		;;
	or32 | or32-*)
		basic_machine=or32-unknown
		os=-coff
		;;
	OSE68000 | ose68000)
		basic_machine=m68000-ericsson
		os=-ose
		;;
	os68k)
		basic_machine=m68k-none
................................................................................
		;;
	pbd)
		basic_machine=sparc-tti
		;;
	pbb)
		basic_machine=m68k-tti
		;;
	pc532 | pc532-*)
		basic_machine=ns32k-pc532
		;;
	pentium | p5 | k5 | k6 | nexgen | viac3)
		basic_machine=i586-pc
		;;
	pentiumpro | p6 | 6x86 | athlon | athlon_*)
		basic_machine=i686-pc
		;;
	pentiumii | pentium2)
		basic_machine=i686-pc
		;;
	pentium-* | p5-* | k5-* | k6-* | nexgen-* | viac3-*)
		basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'`
		;;
	pentiumpro-* | p6-* | 6x86-* | athlon-*)
		basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
		;;
	pentiumii-* | pentium2-*)
		basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
................................................................................
		;;
	pn)
		basic_machine=pn-gould
		;;
	power)	basic_machine=power-ibm
		;;
	ppc)	basic_machine=powerpc-unknown
		;;
	ppc-*)	basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'`
		;;
	ppcle | powerpclittle | ppc-le | powerpc-little)
		basic_machine=powerpcle-unknown
		;;
	ppcle-* | powerpclittle-*)
		basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'`
		;;
	ppc64)	basic_machine=powerpc64-unknown
		;;
	ppc64-*) basic_machine=powerpc64-`echo $basic_machine | sed 's/^[^-]*-//'`
		;;
	ppc64le | powerpc64little | ppc64-le | powerpc64-little)
		basic_machine=powerpc64le-unknown
		;;
	ppc64le-* | powerpc64little-*)
		basic_machine=powerpc64le-`echo $basic_machine | sed 's/^[^-]*-//'`
		;;
	ps2)
		basic_machine=i386-ibm
		;;
	pw32)
................................................................................
		;;
	rm[46]00)
		basic_machine=mips-siemens
		;;
	rtpc | rtpc-*)
		basic_machine=romp-ibm
		;;
	s390 | s390-*)
		basic_machine=s390-ibm
		;;
	s390x | s390x-*)
		basic_machine=s390x-ibm
		;;
	sa29200)
		basic_machine=a29k-amd
		os=-udi
		;;
	sb1)
		basic_machine=mipsisa64sb1-unknown
		;;
	sb1el)
		basic_machine=mipsisa64sb1el-unknown
		;;
	sequent)
		basic_machine=i386-sequent
		;;
	sh)
		basic_machine=sh-hitachi
		os=-hms
		;;
	sparclite-wrs | simso-wrs)
		basic_machine=sparclite-wrs
		os=-vxworks
		;;
	sps7)
		basic_machine=m68k-bull
		os=-sysv2
		;;
................................................................................
		os=-unicos
		;;
	symmetry)
		basic_machine=i386-sequent
		os=-dynix
		;;
	t3e)
		basic_machine=alphaev5-cray
		os=-unicos
		;;
	t90)
		basic_machine=t90-cray
		os=-unicos
		;;
        tic4x | c4x*)
		basic_machine=tic4x-unknown
		os=-coff
		;;
	tic54x | c54x*)
		basic_machine=tic54x-unknown
		os=-coff
		;;
	tx39)
		basic_machine=mipstx39-unknown
		;;
	tx39el)
		basic_machine=mipstx39el-unknown
		;;
	toad1)
		basic_machine=pdp10-xkl
		os=-tops20
		;;
	tower | tower-32)
		basic_machine=m68k-ncr
		;;
	udi29k)
		basic_machine=a29k-amd
		os=-udi
		;;
................................................................................
		os=-sysv
		;;
	vms)
		basic_machine=vax-dec
		os=-vms
		;;
	vpp*|vx|vx-*)
		basic_machine=f301-fujitsu
		;;
	vxworks960)
		basic_machine=i960-wrs
		os=-vxworks
		;;
	vxworks68)
		basic_machine=m68k-wrs
		os=-vxworks
................................................................................
		basic_machine=w65-wdc
		os=-none
		;;
	w89k-*)
		basic_machine=hppa1.1-winbond
		os=-proelf
		;;
	xps | xps100)
		basic_machine=xps100-honeywell

		;;
	ymp)
		basic_machine=ymp-cray
		os=-unicos
		;;



	z8k-*-coff)
		basic_machine=z8k-unknown
		os=-sim
		;;
	none)
		basic_machine=none-none
		os=-none
................................................................................
		basic_machine=hppa1.1-winbond
		;;
	op50n)
		basic_machine=hppa1.1-oki
		;;
	op60c)
		basic_machine=hppa1.1-oki







		;;
	romp)
		basic_machine=romp-ibm
		;;
	rs6000)
		basic_machine=rs6000-ibm
		;;
................................................................................
		;;
	pdp11)
		basic_machine=pdp11-dec
		;;
	we32k)
		basic_machine=we32k-att
		;;
	sh3 | sh4 | sh3eb | sh4eb | sh[1234]le | sh3ele)
		basic_machine=sh-unknown
		;;
	sh64)
		basic_machine=sh64-unknown
		;;
	sparc | sparcv9 | sparcv9b)
		basic_machine=sparc-sun
		;;
	cydra)
		basic_machine=cydra-cydrome
		;;
	orion)
		basic_machine=orion-highlevel
		;;
	orion105)
		basic_machine=clipper-highlevel
................................................................................
		;;
	mac | mpw | mac-mpw)
		basic_machine=m68k-apple
		;;
	pmac | pmac-mpw)
		basic_machine=powerpc-apple
		;;




	*-unknown)
		# Make sure to match an already-canonicalized machine name.
		;;
	*)
		echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
		exit 1
		;;
................................................................................
	      | -hiux* | -386bsd* | -netbsd* | -openbsd* | -freebsd* | -riscix* \
	      | -lynxos* | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \
	      | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \
	      | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \
	      | -chorusos* | -chorusrdb* \
	      | -cygwin* | -pe* | -psos* | -moss* | -proelf* | -rtems* \
	      | -mingw32* | -linux-gnu* | -uxpv* | -beos* | -mpeix* | -udk* \
	      | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \
	      | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \
	      | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \
	      | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \
	      | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \
	      | -powermax* | -dnix* | -microbsd*)
	# Remember, each alternative MUST END IN *, to match a version number.
		;;
	-qnx*)
		case $basic_machine in
		    x86-* | i*86-*)
			;;
		    *)
			os=-nto$os
			;;
		esac
		;;
	-nto-qnx*)
		;;
	-nto*)

		os=`echo $os | sed -e 's|nto|nto-qnx|'`
		;;
	-sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \
	      | -windows* | -osx | -abug | -netware* | -os9* | -beos* \
	      | -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*)
		;;
	-mac*)
		os=`echo $os | sed -e 's|mac|macos|'`
................................................................................
		;;
	-dynix*)
		os=-bsd
		;;
	-acis*)
		os=-aos
		;;
	-atheos*)
		os=-atheos
		;;
	-386bsd)
		os=-bsd
		;;
	-ctix* | -uts*)
		os=-sysv
		;;
	-nova*)
		os=-rtmk-nova
		;;
	-ns2 )
		os=-nextstep2
		;;
	-nsk*)
		os=-nsk
		;;
	# Preserve the version number of sinix5.
	-sinix5.*)
		os=`echo $os | sed -e 's|sinix|sysv|'`
................................................................................
		;;
	-es1800*)
		os=-ose
		;;
	-xenix)
		os=-xenix
		;;
	-*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*)
		os=-mint
		;;
	-none)
		;;
	*)
		# Get rid of the `-' at the beginning of $os.
		os=`echo $os | sed 's/[^-]*-//'`
		echo Invalid configuration \`$1\': system \`$os\' not recognized 1>&2
................................................................................
		;;
	arm*-rebel)
		os=-linux
		;;
	arm*-semi)
		os=-aout
		;;
	# This must come before the *-dec entry.
	pdp10-*)
		os=-tops20
		;;
	pdp11-*)
		os=-none
		;;
	*-dec | vax-*)
		os=-ultrix4.2
		;;
	m68*-apollo)
		os=-domain
................................................................................
		;;
	mips*-cisco)
		os=-elf
		;;
	mips*-*)
		os=-elf
		;;
	or32-*)
		os=-coff
		;;
	*-tti)	# must be before sparc entry or we get the wrong os.
		os=-sysv3
		;;
	sparc-* | *-sun)
		os=-sunos4.1.1
		;;
	*-be)
................................................................................
		;;
	i370-*)
		os=-mvs
		;;
	*-next)
		os=-nextstep3
		;;
	*-gould)
		os=-sysv
		;;
	*-highlevel)
		os=-bsd
		;;
	*-encore)
		os=-bsd
		;;
	*-sgi)
		os=-irix
		;;
	*-siemens)
		os=-sysv4
		;;
	*-masscomp)
		os=-rtu
		;;
	f30[01]-fujitsu | f700-fujitsu)
		os=-uxpv
................................................................................
				;;
			-mvs* | -opened*)
				vendor=ibm
				;;
			-ptx*)
				vendor=sequent
				;;
			-vxsim* | -vxworks* | -windiss*)
				vendor=wrs
				;;
			-aux*)
				vendor=apple
				;;
			-hms*)
				vendor=hitachi

#! /bin/sh

# libtoolT - Provide generalized library-building support services.
# Generated automatically by  (GNU  )
# NOTE: Changes made to this file will be lost: look at ltmain.sh.
#
# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001
# Free Software Foundation, Inc.
#
# This file is part of GNU Libtool:
# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
................................................................................
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
#
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
# configuration script generated by Autoconf, you may include it under
# the same distribution terms that you use for the rest of that program.




# Sed that helps us avoid accidentally triggering echo(1) options like -n.
Xsed="sed -e s/^X//"

# The HP-UX ksh and POSIX shell print the target directory to stdout
# if CDPATH is set.
if test "X${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi

# The names of the tagged configurations supported by this script.
available_tags=" CXX GCJ"

# ### BEGIN LIBTOOL CONFIG

# Libtool was configured on host alice:

# Shell to use when invoking shell scripts.
SHELL="/bin/sh"

................................................................................
# An echo program that does not interpret backslashes.
echo="echo"

# The archiver.
AR="ar"
AR_FLAGS="cru"

# A C compiler.
LTCC=gcc

# A language-specific compiler.
CC="gcc"

# Is the compiler the GNU C compiler?
with_gcc=yes

# The linker used to build libraries.
LD="/usr/bin/ld"
................................................................................
# Old archive suffix (normally "a").
libext="a"

# Executable file suffix (normally "").
exeext=""

# Additional compiler flags for building library objects.
pic_flag=" -fPIC -DPIC"
pic_mode=default

# What is the maximum length of a command?
max_cmd_len=49153

# Does compiler simultaneously support -c and -o options?
compiler_c_o="yes"




# Must we lock files when doing compilation ?
need_locks="no"

# Do we need the lib prefix for modules?
need_lib_prefix=no

................................................................................
postinstall_cmds=""
postuninstall_cmds=""

# Commands to strip libraries.
old_striplib="strip --strip-debug"
striplib="strip --strip-unneeded"

# Dependencies to place before the objects being linked to create a
# shared library.
predep_objects=""

# Dependencies to place after the objects being linked to create a
# shared library.
postdep_objects=""

# Dependencies to place before the objects being linked to create a
# shared library.
predeps=""

# Dependencies to place after the objects being linked to create a
# shared library.
postdeps=""

# The library search path used internally by the compiler when linking
# a shared library.
compiler_lib_search_path=""

# Method to check whether dependent libraries are shared objects.
deplibs_check_method="pass_all"

# Command to use when deplibs_check_method == file_magic.
file_magic_cmd="\$MAGIC_CMD"

# Flag that allows shared libraries with undefined symbols to be built.
................................................................................
# Same as above, but a single script fragment to be evaled but not shown.
finish_eval=""

# Take the output of nm and produce a listing of raw symbols and C names.
global_symbol_pipe="sed -n -e 's/^.*[ 	]\\([ABCDGISTW][ABCDGISTW]*\\)[ 	][ 	]*\\(\\)\\([_A-Za-z][_A-Za-z0-9]*\\)\$/\\1 \\2\\3 \\3/p'"

# Transform the output of nm in a proper C declaration
global_symbol_to_cdecl="sed -n -e 's/^. .* \\(.*\\)\$/extern int \\1;/p'"

# Transform the output of nm in a C name address pair
global_symbol_to_c_name_address="sed -n -e 's/^: \\([^ ]*\\) \$/  {\\\"\\1\\\", (lt_ptr) 0},/p' -e 's/^[BCDEGRST] \\([^ ]*\\) \\([^ ]*\\)\$/  {\"\\2\", (lt_ptr) \\&\\2},/p'"

# This is the shared library runtime path variable.
runpath_var=LD_RUN_PATH

................................................................................

# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
# the resulting binary.
hardcode_shlibpath_var=unsupported

# Variables whose values should be saved in libtool wrapper scripts and
# restored at relink time.
variables_saved_for_relink="PATH  LD_RUN_PATH GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"

# Whether libtool must link a program against all its dependency libraries.
link_all_deplibs=unknown

# Compile-time system search path for libraries
sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"

................................................................................
  cat <<EOF
$*
EOF
  exit 0
fi

# The name of this program.
progname=`$echo "$0" | sed 's%^.*/%%'`
modename="$progname"

# Constants.
PROGRAM=ltmain.sh
PACKAGE=libtool
VERSION=1.4b
TIMESTAMP=" (1.971 2001/07/09 22:02:09)"

default_mode=
help="Try \`$progname --help' for more information."
magic="%%%MAGIC variable%%%"
mkdir="mkdir"
mv="mv -f"
rm="rm -f"

# Sed substitution that helps us do robust quoting.  It backslashifies
# metacharacters that are still active within double-quoted strings.
Xsed='sed -e 1s/^X//'
sed_quote_subst='s/\([\\`\\"$\\\\]\)/\\\1/g'
SP2NL='tr \040 \012'
NL2SP='tr \015\012 \040\040'










# NLS nuisances.
# Only set LANG and LC_ALL to C if already set.
# These must not be set unconditionally because not all systems understand
# e.g. LANG=C (notably SCO).
# We save the old values to restore during execute mode.
if test "${LC_ALL+set}" = set; then
  save_LC_ALL="$LC_ALL"; LC_ALL=C; export LC_ALL
fi
if test "${LANG+set}" = set; then
  save_LANG="$LANG"; LANG=C; export LANG
fi




if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then
  echo "$modename: not configured to build any kind of library" 1>&2
  echo "Fatal configuration error.  See the $PACKAGE docs for more information." 1>&2
  exit 1
fi

................................................................................

  # If the previous option needs an argument, assign it.
  if test -n "$prev"; then
    case $prev in
    execute_dlfiles)
      execute_dlfiles="$execute_dlfiles $arg"
      ;;
    tag)
      tagname="$arg"

      # Check whether tagname contains only valid characters
      case $tagname in
      *[!-_A-Za-z0-9,/]*)
	echo "$progname: invalid tag name: $tagname" 1>&2
	exit 1
        ;;
      esac

      case $tagname in
      CC)
	# Don't test for the "default" C tag, as we know, it's there, but
	# not specially marked.
	;;
      *)
        if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "$0" > /dev/null; then
          taglist="$taglist $tagname"
	  # Evaluate the configuration.
	  eval "`sed -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$tagname'$/,/^# ### END LIBTOOL TAG CONFIG: '$tagname'$/p' < $0`"
        else
	  echo "$progname: ignoring unknown tag $tagname" 1>&2
        fi
        ;;
      esac
      ;;
    *)
      eval "$prev=\$arg"
      ;;
    esac

    prev=
    prevopt=
................................................................................
  case $arg in
  --help)
    show_help=yes
    ;;

  --version)
    echo "$PROGRAM (GNU $PACKAGE) $VERSION$TIMESTAMP"
    echo
    echo "Copyright 1996, 1997, 1998, 1999, 2000, 2001"
    echo "Free Software Foundation, Inc."
    echo "This is free software; see the source for copying conditions.  There is NO"
    echo "warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
    exit 0
    ;;

  --config)
    sed -e '1,/^# ### BEGIN LIBTOOL CONFIG/d' -e '/^# ### END LIBTOOL CONFIG/,$d' $0
    # Now print the configurations for the tags.
    for tagname in $taglist; do
      sed -n -e "/^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$/,/^# ### END LIBTOOL TAG CONFIG: $tagname$/p" < "$0"
    done
    exit 0
    ;;

  --debug)
    echo "$progname: enabling shell trace mode"
    set -x
    ;;
................................................................................
    ;;

  --finish) mode="finish" ;;

  --mode) prevopt="--mode" prev=mode ;;
  --mode=*) mode="$optarg" ;;



  --quiet | --silent)
    show=:
    ;;

  --tag) prevopt="--tag" prev=tag ;;
  --tag=*)
    set tag "$optarg" ${1+"$@"}
    shift
    prev=tag
    ;;

  -dlopen)
    prevopt="-dlopen"
    prev=execute_dlfiles
    ;;

  -*)
    $echo "$modename: unrecognized option \`$arg'" 1>&2
................................................................................
exec_cmd=

if test -z "$show_help"; then

  # Infer the operation mode.
  if test -z "$mode"; then
    case $nonopt in
    *cc | *++ | gcc* | *-gcc*)
      mode=link
      for arg
      do
	case $arg in
	-c)
	   mode=compile
	   break
................................................................................
	prev=xcompiler
	continue
	;;

      -Wc,*)
	args=`$echo "X$arg" | $Xsed -e "s/^-Wc,//"`
	lastarg=
	IFS="${IFS= 	}"; save_ifs="$IFS"; IFS=','
	for arg in $args; do
	  IFS="$save_ifs"

	  # Double-quote args containing other shell metacharacters.
	  # Many Bourne shells cannot handle close brackets correctly
	  # in scan sets, so we specify it separately.
	  case $arg in
................................................................................
      $echo "$modename: you must specify a target with \`-o'" 1>&2
      exit 1
      ;;
    esac

    # Recognize several different file suffixes.
    # If the user specifies -o file.o, it is replaced with file.lo
    xform='[cCFSifmso]'
    case $libobj in
    *.ada) xform=ada ;;
    *.adb) xform=adb ;;
    *.ads) xform=ads ;;
    *.asm) xform=asm ;;
    *.c++) xform=c++ ;;
    *.cc) xform=cc ;;
    *.ii) xform=ii ;;
    *.class) xform=class ;;
    *.cpp) xform=cpp ;;
    *.cxx) xform=cxx ;;
    *.f90) xform=f90 ;;
    *.for) xform=for ;;
    *.java) xform=java ;;
    esac

    libobj=`$echo "X$libobj" | $Xsed -e "s/\.$xform$/.lo/"`

    case $libobj in
    *.lo) obj=`$echo "X$libobj" | $Xsed -e "$lo2o"` ;;
    *)
      $echo "$modename: cannot determine name of library object from \`$libobj'" 1>&2
      exit 1
      ;;
    esac

    # Infer tagged configuration to use if any are available and
    # if one wasn't chosen via the "--tag" command line option.
    # Only attempt this if the compiler in the base compile
    # command doesn't match the default compiler.
    if test -n "$available_tags" && test -z "$tagname"; then
      case $base_compile in
      "$CC "*) ;;
      # Blanks in the command may have been stripped by the calling shell,
      # but not from the CC environment variable when ltconfig was run.
      "`$echo $CC` "*) ;;
      *)
        for z in $available_tags; do
          if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$0" > /dev/null; then
	    # Evaluate the configuration.
	    eval "`sed -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $0`"
            case $base_compile in
	    "$CC "*)
              # The compiler in the base compile command matches
              # the one in the tagged configuration.
              # Assume this is the tagged configuration we want.
              tagname=$z
              break
              ;;
	    "`$echo $CC` "*)
	      tagname=$z
	      break
	      ;;
	    esac
          fi
        done
        # If $tagname still isn't set, then no tagged configuration
        # was found and let the user know that the "--tag" command
        # line option must be used.
        if test -z "$tagname"; then
          echo "$modename: unable to infer tagged configuration"
          echo "$modename: specify a tag with \`--tag'" 1>&2
	  exit 1
#        else
#          echo "$modename: using $tagname tagged configuration"
        fi
	;;
      esac
    fi

    objname=`$echo "X$obj" | $Xsed -e 's%^.*/%%'`
    xdir=`$echo "X$obj" | $Xsed -e 's%/[^/]*$%%'`
    if test "X$xdir" = "X$obj"; then
      xdir=
    else
      xdir=$xdir/
    fi
    lobj=${xdir}$objdir/$objname

    if test -z "$base_compile"; then
      $echo "$modename: you must specify a compilation command" 1>&2
      $echo "$help" 1>&2
      exit 1
    fi

    # Delete any leftover library objects.
    if test "$build_old_libs" = yes; then
      removelist="$obj $lobj $libobj ${libobj}T"
    else
      removelist="$lobj $libobj ${libobj}T"
    fi

    $run $rm $removelist
    trap "$run $rm $removelist; exit 1" 1 2 15

    # On Cygwin there's no "real" PIC flag so we must build both object types
    case $host_os in
................................................................................
    # not support -o with -c
    if test "$compiler_c_o" = no; then
      output_obj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%' -e 's%\.[^.]*$%%'`.${objext}
      lockfile="$output_obj.lock"
      removelist="$removelist $output_obj $lockfile"
      trap "$run $rm $removelist; exit 1" 1 2 15
    else
      output_obj=
      need_locks=no
      lockfile=
    fi

    # Lock this critical section if it is needed
    # We use this script file to make the link, it avoids creating a new file
    if test "$need_locks" = yes; then
................................................................................
      echo $srcfile > "$lockfile"
    fi

    if test -n "$fix_srcfile_path"; then
      eval srcfile=\"$fix_srcfile_path\"
    fi

    $run $rm "$libobj" "${libobj}T"

    # Create a libtool object file (analogous to a ".la" file),
    # but don't create it if we're doing a dry run.
    test -z "$run" && cat > ${libobj}T <<EOF
# $libobj - a libtool object file
# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP
#
# Please DO NOT delete this file!
# It is necessary for linking the library.

# Name of the PIC object.
EOF

    # Only build a PIC object if we are building libtool libraries.
    if test "$build_libtool_libs" = yes; then
      # Without this assignment, base_compile gets emptied.
      fbsd_hideous_sh_bug=$base_compile

      if test "$pic_mode" != no; then

	command="$base_compile $srcfile $pic_flag"
      else
	# Don't build PIC code
	command="$base_compile $srcfile"
      fi










      if test ! -d ${xdir}$objdir; then




	$show "$mkdir ${xdir}$objdir"
	$run $mkdir ${xdir}$objdir
	status=$?
	if test $status -ne 0 && test ! -d ${xdir}$objdir; then
	  exit $status
        fi
      fi 






      if test -z "$output_obj"; then
        # Place PIC objects in $objdir
        command="$command -o $lobj"
      fi

      $run $rm "$lobj" "$output_obj"

      $show "$command"
      if $run eval "$command"; then :
      else
	test -n "$output_obj" && $run $rm $removelist
	exit 1
      fi

................................................................................
compiler."

	$run $rm $removelist
	exit 1
      fi

      # Just move the object if needed, then go on to compile the next one
      if test -n "$output_obj" && test "x$output_obj" != "x$lobj"; then
	$show "$mv $output_obj $lobj"
	if $run $mv $output_obj $lobj; then :








































	else
	  error=$?
	  $run $rm $removelist
	  exit $error
	fi
      fi

      # Append the name of the PIC object to the libtool object file.
      test -z "$run" && cat >> ${libobj}T <<EOF
pic_object='$objdir/$objname'

EOF

      # Allow error messages only from the first compilation.
      suppress_output=' >/dev/null 2>&1'
    else
      # No PIC object so indicate it doesn't exist in the libtool
      # object file.
      test -z "$run" && cat >> ${libobj}T <<EOF
pic_object=none

EOF
    fi

    # Only build a position-dependent object if we build old libraries.
    if test "$build_old_libs" = yes; then
      if test "$pic_mode" != yes; then
	# Don't build PIC code
	command="$base_compile $srcfile"
      else

	command="$base_compile $srcfile $pic_flag"
      fi
      if test "$compiler_c_o" = yes; then
	command="$command -o $obj"

      fi

      # Suppress compiler output if we already did a PIC compilation.
      command="$command$suppress_output"
      $run $rm "$obj" "$output_obj"
      $show "$command"
      if $run eval "$command"; then :
      else
	$run $rm $removelist
	exit 1
      fi

................................................................................
compiler."

	$run $rm $removelist
	exit 1
      fi

      # Just move the object if needed
      if test -n "$output_obj" && test "x$output_obj" != "x$obj"; then
	$show "$mv $output_obj $obj"
	if $run $mv $output_obj $obj; then :
	else
	  error=$?
	  $run $rm $removelist
	  exit $error
	fi
      fi

      # Append the name of the non-PIC object the libtool object file.
      # Only append if the libtool object file exists.
      test -z "$run" && cat >> ${libobj}T <<EOF
# Name of the non-PIC object.
non_pic_object='$objname'

EOF
    else


      # Append the name of the non-PIC object the libtool object file.
      # Only append if the libtool object file exists.
      test -z "$run" && cat >> ${libobj}T <<EOF
# Name of the non-PIC object.
non_pic_object=none

EOF
    fi



    $run $mv "${libobj}T" "${libobj}"

    # Unlock the critical section if it was locked
    if test "$need_locks" != no; then
      $run $rm "$lockfile"
    fi

    exit 0
    ;;
................................................................................
      allow_undefined=yes
      ;;
    *)
      allow_undefined=yes
      ;;
    esac
    libtool_args="$nonopt"
    base_compile="$nonopt"
    compile_command="$nonopt"
    finalize_command="$nonopt"

    compile_rpath=
    finalize_rpath=
    compile_shlibpath=
    finalize_shlibpath=
................................................................................
    old_convenience=
    deplibs=
    old_deplibs=
    compiler_flags=
    linker_flags=
    dllsearchpath=
    lib_search_path=`pwd`


    avoid_version=no
    dlfiles=
    dlprefiles=
    dlself=no
    export_dynamic=no
    export_symbols=
................................................................................
    export_symbols_regex=
    generated=
    libobjs=
    ltlibs=
    module=no
    no_install=no
    objs=
    non_pic_objects=
    prefer_static_libs=no
    preload=no
    prev=
    prevarg=
    release=
    rpath=
    xrpath=
................................................................................

    # See if our shared archives depend on static archives.
    test -n "$old_archive_from_new_cmds" && build_old_libs=yes

    # Go through the arguments, transforming them on the way.
    while test $# -gt 0; do
      arg="$1"
      base_compile="$base_compile $arg"
      shift
      case $arg in
      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
	qarg=\"`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`\" ### testsuite: skip nested quoting test
	;;
      *) qarg=$arg ;;
      esac
................................................................................
	  continue
	  ;;
	expsyms_regex)
	  export_symbols_regex="$arg"
	  prev=
	  continue
	  ;;
	release)
	  release="-$arg"
	  prev=
	  continue
	  ;;
	objectlist)
	  if test -f "$arg"; then
            save_arg=$arg
	    moreargs=
	    for fil in `cat $save_arg`
	    do
#	      moreargs="$moreargs $fil"
              arg=$fil
              # A libtool-controlled object.

	      # Check to see that this really is a libtool object.
	      if (sed -e '2q' $arg | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
                pic_object=
                non_pic_object=

                # Read the .lo file
                # If there is no directory component, then add one.
                case $arg in
                */* | *\\*) . $arg ;;
                *) . ./$arg ;;
                esac

                if test -z "$pic_object" || \
                   test -z "$non_pic_object" ||
                   test "$pic_object" = none && \
                   test "$non_pic_object" = none; then
                  $echo "$modename: cannot find name of object for \`$arg'" 1>&2
                  exit 1
                fi

	        # Extract subdirectory from the argument.
	        xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
	        if test "X$xdir" = "X$arg"; then
	          xdir=
	        else
	          xdir="$xdir/"
	        fi

                if test "$pic_object" != none; then
                  # Prepend the subdirectory the object is found in.
	          pic_object="$xdir$pic_object"

	          if test "$prev" = dlfiles; then
	            if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
	              dlfiles="$dlfiles $pic_object"
	              prev=
	              continue
	            else
	              # If libtool objects are unsupported, then we need to preload.
	              prev=dlprefiles
	            fi
	          fi

	          # CHECK ME:  I think I busted this.  -Ossama
                  if test "$prev" = dlprefiles; then
	            # Preload the old-style object.
	            dlprefiles="$dlprefiles $pic_object"
	            prev=
                  fi

                  # A PIC object.
	          libobjs="$libobjs $pic_object"
	          arg="$pic_object"
                fi

                # Non-PIC object.
                if test "$non_pic_object" != none; then
                  # Prepend the subdirectory the object is found in.
	          non_pic_object="$xdir$non_pic_object"

                  # A standard non-PIC object
                  non_pic_objects="$non_pic_objects $non_pic_object"
                  if test -z "$pic_object" || test "$pic_object" = none ; then
                    arg="$non_pic_object"
                  fi
                fi
              else
                # Only an error if not doing a dry-run.
                if test -z "$run"; then
                  $echo "$modename: \`$arg' is not a valid libtool object" 1>&2
                  exit 1
                else
                  # Dry-run case.

	          # Extract subdirectory from the argument.
	          xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
	          if test "X$xdir" = "X$arg"; then
	            xdir=
	          else
	            xdir="$xdir/"
	          fi

                  pic_object=`$echo "X${xdir}${objdir}/${arg}" | $Xsed -e "$lo2o"`
                  non_pic_object=`$echo "X${xdir}${arg}" | $Xsed -e "$lo2o"`
	          libobjs="$libobjs $pic_object"
                  non_pic_objects="$non_pic_objects $non_pic_object"
                fi
	      fi
	    done
	  else
	    $echo "$modename: link input file \`$save_arg' does not exist"
	    exit 1
	  fi
          arg=$save_arg
	  prev=
	  continue
	  ;;
	rpath | xrpath)
	  # We need an absolute path.
	  case $arg in
	  [\\/]* | [A-Za-z]:[\\/]*) ;;
	  *)
................................................................................
	if test "X$arg" = "X-export-symbols"; then
	  prev=expsyms
	else
	  prev=expsyms_regex
	fi
	continue
	;;






      # The native IRIX linker understands -LANG:*, -LIST:* and -LNO:*
      # so, if we see these flags be careful not to treat them like -L
      -L[A-Z][A-Z]*:*)
	case $with_gcc/$host in
	no/*-*-irix*)
	  compile_command="$compile_command $arg"
	  finalize_command="$finalize_command $arg"
	  ;;
	esac
	continue
	;;

................................................................................
	    # These systems don't actually have a C or math library (as such)
	    continue
	    ;;
	  *-*-mingw* | *-*-os2*)
	    # These systems don't actually have a C library (as such)
	    test "X$arg" = "X-lc" && continue
	    ;;
	  *-*-openbsd*)
	    # OpenBSD uses either libc or libc_r.
	    continue
	    ;;
	  *-*-rhapsody* | *-*-darwin1.[012])
	    # Rhapsody C and math libraries are in the System framework
	    deplibs="$deplibs -framework System"
	    continue
	  esac
	fi
        if test "X$arg" = "X-lc_r"; then
         case $host in
         *-*-openbsd*)
           # Do not include libc_r directly, use -pthread flag.
           continue
           ;;
         esac
        fi
	deplibs="$deplibs $arg"
	continue
	;;

      -module)
	module=yes
	continue
................................................................................
	;;

      -no-undefined)
	allow_undefined=no
	continue
	;;

      -objectlist)
	prev=objectlist
	continue
	;;

      -o) prev=output ;;

      -release)
	prev=release
	continue
	;;

................................................................................
	prev=vinfo
	continue
	;;

      -Wc,*)
	args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wc,//'`
	arg=
	IFS="${IFS= 	}"; save_ifs="$IFS"; IFS=','
	for flag in $args; do
	  IFS="$save_ifs"
	  case $flag in
	    *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
	    flag="\"$flag\""
	    ;;
	  esac
................................................................................
	IFS="$save_ifs"
	arg=`$echo "X$arg" | $Xsed -e "s/^ //"`
	;;

      -Wl,*)
	args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wl,//'`
	arg=
	IFS="${IFS= 	}"; save_ifs="$IFS"; IFS=','
	for flag in $args; do
	  IFS="$save_ifs"
	  case $flag in
	    *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
	    flag="\"$flag\""
	    ;;
	  esac
................................................................................
	case $arg in
	*[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
	  arg="\"$arg\""
	  ;;
	esac
	;;

      *.$objext)
	# A standard object.
	objs="$objs $arg"
	;;

      *.lo)
	# A libtool-controlled object.

	# Check to see that this really is a libtool object.
	if (sed -e '2q' $arg | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
          pic_object=
          non_pic_object=

          # Read the .lo file
          # If there is no directory component, then add one.
          case $arg in
          */* | *\\*) . $arg ;;
          *) . ./$arg ;;
          esac

          if test -z "$pic_object" || \
             test -z "$non_pic_object" ||
             test "$pic_object" = none && \
             test "$non_pic_object" = none; then
            $echo "$modename: cannot find name of object for \`$arg'" 1>&2
            exit 1
          fi

	  # Extract subdirectory from the argument.
	  xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
	  if test "X$xdir" = "X$arg"; then
	    xdir=
 	  else
	    xdir="$xdir/"
	  fi

          if test "$pic_object" != none; then
            # Prepend the subdirectory the object is found in.
	    pic_object="$xdir$pic_object"

	    if test "$prev" = dlfiles; then

	      if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
	        dlfiles="$dlfiles $pic_object"
	        prev=
	        continue
	      else
	        # If libtool objects are unsupported, then we need to preload.
	        prev=dlprefiles
	      fi
	    fi

	    # CHECK ME:  I think I busted this.  -Ossama
            if test "$prev" = dlprefiles; then
	      # Preload the old-style object.
	      dlprefiles="$dlprefiles $pic_object"
	      prev=
            fi

            # A PIC object.
	    libobjs="$libobjs $pic_object"
	    arg="$pic_object"
          fi

          # Non-PIC object.
          if test "$non_pic_object" != none; then
            # Prepend the subdirectory the object is found in.
	    non_pic_object="$xdir$non_pic_object"

            # A standard non-PIC object
            non_pic_objects="$non_pic_objects $non_pic_object"
            if test -z "$pic_object" || test "$pic_object" = none ; then
              arg="$non_pic_object"
            fi
          fi
        else
          # Only an error if not doing a dry-run.
          if test -z "$run"; then
            $echo "$modename: \`$arg' is not a valid libtool object" 1>&2
            exit 1
          else
            # Dry-run case.

	    # Extract subdirectory from the argument.
	    xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
	    if test "X$xdir" = "X$arg"; then
	      xdir=
	    else
	      xdir="$xdir/"
	    fi

            pic_object=`$echo "X${xdir}${objdir}/${arg}" | $Xsed -e "$lo2o"`
            non_pic_object=`$echo "X${xdir}${arg}" | $Xsed -e "$lo2o"`

	    libobjs="$libobjs $pic_object"
            non_pic_objects="$non_pic_objects $non_pic_object"
          fi


	fi
	;;

      *.$libext)
	# An archive.
	deplibs="$deplibs $arg"
	old_deplibs="$old_deplibs $arg"
................................................................................

    if test -n "$prev"; then
      $echo "$modename: the \`$prevarg' option requires an argument" 1>&2
      $echo "$help" 1>&2
      exit 1
    fi

    # Infer tagged configuration to use if any are available and
    # if one wasn't chosen via the "--tag" command line option.
    # Only attempt this if the compiler in the base link
    # command doesn't match the default compiler.
    if test -n "$available_tags" && test -z "$tagname"; then
      case $base_compile in
      "$CC "*) ;;
      # Blanks in the command may have been stripped by the calling shell,
      # but not from the CC environment variable when ltconfig was run.
      "`$echo $CC` "*) ;;
      *)
        for z in $available_tags; do
          if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$0" > /dev/null; then
	    # Evaluate the configuration.
	    eval "`sed -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $0`"
            case $base_compile in
	    "$CC "*)
              # The compiler in $compile_command matches
              # the one in the tagged configuration.
              # Assume this is the tagged configuration we want.
              tagname=$z
              break
	      ;;
	    "`$echo $CC` "*)
	      tagname=$z
	      break
	      ;;
	    esac
          fi
        done
        # If $tagname still isn't set, then no tagged configuration
        # was found and let the user know that the "--tag" command
        # line option must be used.
        if test -z "$tagname"; then
          echo "$modename: unable to infer tagged configuration"
          echo "$modename: specify a tag with \`--tag'" 1>&2
	  exit 1
#       else
#         echo "$modename: using $tagname tagged configuration"
        fi
	;;
      esac
    fi

    if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then
      eval arg=\"$export_dynamic_flag_spec\"
      compile_command="$compile_command $arg"
      finalize_command="$finalize_command $arg"
    fi

    oldlibs=
    # calculate the name of the file, without its directory
    outputname=`$echo "X$output" | $Xsed -e 's%^.*/%%'`
    libobjs_save="$libobjs"

    if test -n "$shlibpath_var"; then
      # get the directories listed in $shlibpath_var
      eval shlib_search_path=\`\$echo \"X\${$shlibpath_var}\" \| \$Xsed -e \'s/:/ /g\'\`
................................................................................
    esac

    specialdeplibs=
    libs=
    # Find all interdependent deplibs by searching for libraries
    # that are linked more than once (e.g. -la -lb -la)
    for deplib in $deplibs; do

      case "$libs " in
      *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
      esac

      libs="$libs $deplib"
    done

    if test $linkmode = lib; then
      libs="$predeps $libs $compiler_lib_search_path $postdeps"

      # Compute libraries that are listed more than once in $predeps
      # $postdeps and mark them as special (i.e., whose duplicates are
      # not to be eliminated).
      pre_post_deps=
      for pre_post_dep in $predeps $postdeps; do
        case "$pre_post_deps " in
	*" $pre_post_dep "*) specialdeplibs="$specialdeplibs $pre_post_deps" ;;
	esac
	pre_post_deps="$pre_post_deps $pre_post_dep"
      done
      pre_post_deps=
    fi

    deplibs=
    newdependency_libs=
    newlib_search_path=
    need_relink=no # whether we're linking any uninstalled libtool libraries
    notinst_deplibs= # not-installed libtool libraries
    notinst_path= # paths that contain not-installed libtool libraries
    case $linkmode in
................................................................................
	newdlprefiles=
	passes="conv scan dlopen dlpreopen link"
	;;
    *)  passes="conv"
	;;
    esac
    for pass in $passes; do
      if test "$linkmode,$pass" = "lib,link" ||
	 test "$linkmode,$pass" = "prog,scan"; then
	libs="$deplibs"
	deplibs=
      fi
      if test $linkmode = prog; then

	case $pass in

	dlopen) libs="$dlfiles" ;;



	dlpreopen) libs="$dlprefiles" ;;
	link) libs="$deplibs %DEPLIBS% $dependency_libs" ;;
	esac
      fi
      if test $pass = dlopen; then
	# Collect dlpreopened libraries
	save_deplibs="$deplibs"
	deplibs=
      fi
      for deplib in $libs; do
	lib=
	found=no
	case $deplib in
	-l*)
	  if test $linkmode != lib && test $linkmode != prog; then
	    $echo "$modename: warning: \`-l' is ignored for archives/objects" 1>&2
	    continue
	  fi
	  if test $pass = conv; then
	    deplibs="$deplib $deplibs"
	    continue
	  fi
	  name=`$echo "X$deplib" | $Xsed -e 's/^-l//'`
................................................................................
	      newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`
	    else
	      compile_deplibs="$deplib $compile_deplibs"
	      finalize_deplibs="$deplib $finalize_deplibs"
	    fi
	    ;;
	  *)
	    $echo "$modename: warning: \`-L' is ignored for archives/objects" 1>&2
	    ;;
	  esac # linkmode
	  continue
	  ;; # -L
	-R*)
	  if test $pass = link; then
	    dir=`$echo "X$deplib" | $Xsed -e 's/^-R//'`
................................................................................
	    deplibs="$deplib $deplibs"
	    continue
	  fi
	  case $linkmode in
	  lib)
	    if test "$deplibs_check_method" != pass_all; then
	      echo
	      echo "*** Warning: This library needs some functionality provided by $deplib."
	      echo "*** I have the capability to make that library automatically link in when"
	      echo "*** you link to this library.  But I can only do this if you have a"
	      echo "*** shared version of the library, which you do not appear to have."


	    else
	      echo
	      echo "*** Warning: Linking the shared library $output against the"
	      echo "*** static library $deplib is not portable!"
	      deplibs="$deplib $deplibs"
	    fi
	    continue
................................................................................
	      finalize_deplibs="$deplib $finalize_deplibs"
	    fi
	    continue
	    ;;
	  esac # linkmode
	  ;; # *.$libext
	*.lo | *.$objext)
	  if test $pass = conv; then
	    deplibs="$deplib $deplibs"
	  elif test $linkmode = prog; then
	    if test $pass = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then
	      # If there is no dlopen support or we're linking statically,
	      # we need to preload.
	      newdlprefiles="$newdlprefiles $deplib"
	      compile_deplibs="$deplib $compile_deplibs"
	      finalize_deplibs="$deplib $finalize_deplibs"
	    else
	      newdlfiles="$newdlfiles $deplib"
	    fi
	  fi
	  continue
	  ;;
	%DEPLIBS%)
	  alldeplibs=yes
	  continue
	  ;;
................................................................................
	if test $found = yes || test -f "$lib"; then :
	else
	  $echo "$modename: cannot find the library \`$lib'" 1>&2
	  exit 1
	fi

	# Check to see that this really is a libtool archive.
	if (sed -e '2q' $lib | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
	else
	  $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
	  exit 1
	fi

	ladir=`$echo "X$lib" | $Xsed -e 's%/[^/]*$%%'`
	test "X$ladir" = "X$lib" && ladir="."
................................................................................
	case $lib in
	*/* | *\\*) . $lib ;;
	*) . ./$lib ;;
	esac

	if test "$linkmode,$pass" = "lib,link" ||
	   test "$linkmode,$pass" = "prog,scan" ||
	   { test $linkmode != prog && test $linkmode != lib; }; then

	  test -n "$dlopen" && dlfiles="$dlfiles $dlopen"
	  test -n "$dlpreopen" && dlprefiles="$dlprefiles $dlpreopen"
	fi

	if test $pass = conv; then
	  # Only check for convenience libraries
	  deplibs="$lib $deplibs"
................................................................................
	    fi
	    # It is a libtool convenience library, so add in its objects.
	    convenience="$convenience $ladir/$objdir/$old_library"
	    old_convenience="$old_convenience $ladir/$objdir/$old_library"
	    tmp_libs=
	    for deplib in $dependency_libs; do
	      deplibs="$deplib $deplibs"

	      case "$tmp_libs " in
	      *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
	      esac

	      tmp_libs="$tmp_libs $deplib"
	    done
	  elif test $linkmode != prog && test $linkmode != lib; then
	    $echo "$modename: \`$lib' is not a convenience library" 1>&2
	    exit 1
	  fi
	  continue
................................................................................
	if test $pass = dlopen; then
	  if test -z "$libdir"; then
	    $echo "$modename: cannot -dlopen a convenience library: \`$lib'" 1>&2
	    exit 1
	  fi
	  if test -z "$dlname" || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then
	    # If there is no dlname, no dlopen support or we're linking
	    # statically, we need to preload.  We also need to preload any
	    # dependent libraries so libltdl's deplib preloader doesn't
	    # bomb out in the load deplibs phase.
	    dlprefiles="$dlprefiles $lib $dependency_libs"
	  else
	    newdlfiles="$newdlfiles $lib"
	  fi
	  continue
	fi # $pass = dlopen

	# We need an absolute path.
................................................................................
	  # Link the convenience library
	  if test $linkmode = lib; then
	    deplibs="$dir/$old_library $deplibs"
	  elif test "$linkmode,$pass" = "prog,link"; then
	    compile_deplibs="$dir/$old_library $compile_deplibs"
	    finalize_deplibs="$dir/$old_library $finalize_deplibs"
	  else
	    deplibs="$lib $deplibs" # used for prog,scan pass
	  fi
	  continue
	fi

	if test $linkmode = prog && test $pass != link; then
	  newlib_search_path="$newlib_search_path $ladir"
	  deplibs="$lib $deplibs"
................................................................................
	    if test $linkalldeplibs = yes; then
	      deplibs="$deplib $deplibs"
	    else
	      # Need to hardcode shared library paths
	      # or/and link against static libraries
	      newdependency_libs="$deplib $newdependency_libs"
	    fi

	    case "$tmp_libs " in
	    *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
	    esac

	    tmp_libs="$tmp_libs $deplib"
	  done # for deplib
	  continue
	fi # $linkmode = prog...

	if test "$linkmode,$pass" = "prog,link"; then
	  if test -n "$library_names" &&
	     { test "$prefer_static_libs" = no || test -z "$old_library"; }; then
	    # We need to hardcode the library path
	    if test -n "$shlibpath_var"; then
	      # Make sure the rpath contains only unique directories.
	      case "$temp_rpath " in
	      *" $dir "*) ;;
	      *" $absdir "*) ;;
	      *) temp_rpath="$temp_rpath $dir" ;;
	      esac
	    fi



	    # Hardcode the library path.
	    # Skip directories that are in the system default run-time
	    # search path.
	    case " $sys_lib_dlsearch_path " in
	    *" $absdir "*) ;;
	    *)
	      case "$compile_rpath " in
................................................................................
	    *)
	      case "$finalize_rpath " in
	      *" $libdir "*) ;;
	      *) finalize_rpath="$finalize_rpath $libdir"
	      esac
	      ;;
	    esac











	  fi # $linkmode,$pass = prog,link...

	  if test "$alldeplibs" = yes &&
	     { test "$deplibs_check_method" = pass_all ||
	       { test "$build_libtool_libs" = yes &&
		 test -n "$library_names"; }; }; then
	    # We only need to search for static libraries
	    continue
	  fi
	fi
 
	link_static=no # Whether the deplib will be linked statically
	if test -n "$library_names" &&
	   { test "$prefer_static_libs" = no || test -z "$old_library"; }; then
	  if test "$installed" = no; then
	    notinst_deplibs="$notinst_deplibs $lib"
	    need_relink=yes
	  fi
	  # This is a shared library
	  if test $linkmode = lib &&
	     test $hardcode_into_libs = yes; then
	    # Hardcode the library path.
	    # Skip directories that are in the system default run-time
	    # search path.
	    case " $sys_lib_dlsearch_path " in
	    *" $absdir "*) ;;
	    *)
	      case "$compile_rpath " in
	      *" $absdir "*) ;;
	      *) compile_rpath="$compile_rpath $absdir"
	      esac
	      ;;
	    esac
	    case " $sys_lib_dlsearch_path " in
	    *" $libdir "*) ;;
	    *)
	      case "$finalize_rpath " in
	      *" $libdir "*) ;;
	      *) finalize_rpath="$finalize_rpath $libdir"
	      esac
	      ;;
	    esac
	  fi

	  if test -n "$old_archive_from_expsyms_cmds"; then
	    # figure out the soname
	    set dummy $library_names
	    realname="$2"
	    shift; shift
	    libname=`eval \\$echo \"$libname_spec\"`
................................................................................
	      eval soname=\"$soname_spec\"
	    else
	      soname="$realname"
	    fi

	    # Make a new name for the extract_expsyms_cmds to use
	    soroot="$soname"
	    soname=`echo $soroot | sed -e 's/^.*\///'`
	    newlib="libimp-`echo $soname | sed 's/^lib//;s/\.dll$//'`.a"

	    # If the library has no export list, then create one now
	    if test -f "$output_objdir/$soname-def"; then :
	    else
	      $show "extracting exported symbol list from \`$soname'"
	      IFS="${IFS= 	}"; save_ifs="$IFS"; IFS='~'
	      eval cmds=\"$extract_expsyms_cmds\"
	      for cmd in $cmds; do
		IFS="$save_ifs"
		$show "$cmd"
		$run eval "$cmd" || exit $?
	      done
	      IFS="$save_ifs"
	    fi

	    # Create $newlib
	    if test -f "$output_objdir/$newlib"; then :; else
	      $show "generating import library for \`$soname'"
	      IFS="${IFS= 	}"; save_ifs="$IFS"; IFS='~'
	      eval cmds=\"$old_archive_from_expsyms_cmds\"
	      for cmd in $cmds; do
		IFS="$save_ifs"
		$show "$cmd"
		$run eval "$cmd" || exit $?
	      done
	      IFS="$save_ifs"
................................................................................
	      fi
	      ;;
	    relink)
	      if test "$hardcode_direct" = yes; then
		add="$dir/$linklib"
	      elif test "$hardcode_minus_L" = yes; then
		add_dir="-L$dir"








		add="-l$name"
	      elif test "$hardcode_shlibpath_var" = yes; then
		add_shlibpath="$dir"
		add="-l$name"
	      else
		lib_linked=no
	      fi
................................................................................
	      *":$libdir:"*) ;;
	      *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;;
	      esac
	      add="-l$name"
	    else
	      # We cannot seem to hardcode it, guess we'll fake it.
	      add_dir="-L$libdir"








	      add="-l$name"
	    fi

	    if test $linkmode = prog; then
	      test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs"
	      test -n "$add" && finalize_deplibs="$add $finalize_deplibs"
	    else
	      test -n "$add_dir" && deplibs="$add_dir $deplibs"
	      test -n "$add" && deplibs="$add $deplibs"
	    fi
	  fi
	elif test $linkmode = prog; then









	  # Here we assume that one of hardcode_direct or hardcode_minus_L
	  # is not unsupported.  This is valid on all known static and
	  # shared platforms.
	  if test "$hardcode_direct" != unsupported; then
	    test -n "$old_library" && linklib="$old_library"
	    compile_deplibs="$dir/$linklib $compile_deplibs"
	    finalize_deplibs="$dir/$linklib $finalize_deplibs"
................................................................................
	  if test "$deplibs_check_method" != pass_all; then
	    # We're trying link a shared library against a static one
	    # but the system doesn't support it.

	    # Just print a warning and add the library to dependency_libs so
	    # that the program can be linked against the static library.
	    echo
	    echo "*** Warning: This library needs some functionality provided by $lib."
	    echo "*** I have the capability to make that library automatically link in when"
	    echo "*** you link to this library.  But I can only do this if you have a"
	    echo "*** shared version of the library, which you do not appear to have."
	    if test "$module" = yes; then

	      echo "*** Therefore, libtool will create a static module, that should work "
	      echo "*** as long as the dlopening application is linked with the -dlopen flag."
	      if test -z "$global_symbol_pipe"; then
	        echo
	        echo "*** However, this would only work if libtool was able to extract symbol"
	        echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
	        echo "*** not find such a program.  So, this module is probably useless."
	        echo "*** \`nm' from GNU binutils and a full rebuild may help."
	      fi
	      if test "$build_old_libs" = no; then
	        build_libtool_libs=module
	        build_old_libs=yes
	      else
	        build_libtool_libs=no
	      fi
	    fi
	  else
	    convenience="$convenience $dir/$old_library"
	    old_convenience="$old_convenience $dir/$old_library"
	    deplibs="$dir/$old_library $deplibs"
	    link_static=yes
................................................................................
	  newlib_search_path="$newlib_search_path $absdir"
	  # Link against this library
	  test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs"
	  # ... and its dependency_libs
	  tmp_libs=
	  for deplib in $dependency_libs; do
	    newdependency_libs="$deplib $newdependency_libs"

	    case "$tmp_libs " in
	    *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
	    esac

	    tmp_libs="$tmp_libs $deplib"
	  done

	  if test $link_all_deplibs != no; then
	    # Add the search paths of all dependency libraries
	    for deplib in $dependency_libs; do
	      case $deplib in
................................................................................
		    absdir="$dir"
		  fi
		  ;;
		esac
		if grep "^installed=no" $deplib > /dev/null; then
		  path="-L$absdir/$objdir"
		else
		  eval libdir=`sed -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
		  if test -z "$libdir"; then
		    $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2
		    exit 1
		  fi
		  if test "$absdir" != "$libdir"; then
		    $echo "$modename: warning: \`$deplib' seems to be moved" 1>&2
		  fi
................................................................................
	      *" $path "*) ;;
	      *) deplibs="$deplibs $path" ;;
	      esac
	    done
	  fi # link_all_deplibs != no
	fi # linkmode = lib
      done # for deplib in $libs
      dependency_libs="$newdependency_libs"
      if test $pass = dlpreopen; then
	# Link the dlpreopened libraries before other libraries
	for deplib in $save_deplibs; do
	  deplibs="$deplib $deplibs"
	done
      fi
      if test $pass != dlopen; then

	if test $pass != conv; then
	  # Make sure lib_search_path contains only unique directories.
	  lib_search_path=
	  for dir in $newlib_search_path; do
	    case "$lib_search_path " in
	    *" $dir "*) ;;
	    *) lib_search_path="$lib_search_path $dir" ;;
................................................................................
	  vars="compile_deplibs finalize_deplibs"
	fi
	for var in $vars dependency_libs; do
	  # Add libraries to $var in reverse order
	  eval tmp_libs=\"\$$var\"
	  new_libs=
	  for deplib in $tmp_libs; do
	    # FIXME: Pedantically, this is the right thing to do, so
	    #        that some nasty dependency loop isn't accidentally
	    #        broken:
	    #new_libs="$deplib $new_libs"
	    # Pragmatically, this seems to cause very few problems in
	    # practice:
	    case $deplib in
            -L*) new_libs="$deplib $new_libs" ;;
            *)
	      # And here is the reason: when a library appears more
	      # than once as an explicit dependence of a library, or
	      # is implicitly linked in more than once by the
	      # compiler, it is considered special, and multiple
	      # occurrences thereof are not removed.  Compare this
	      # with having the same library being listed as a
	      # dependency of multiple other libraries: in this case,
	      # we know (pedantically, we assume) the library does not
	      # need to be listed more than once, so we keep only the
	      # last copy.  This is not always right, but it is rare
	      # enough that we require users that really mean to play
	      # such unportable linking tricks to link the library
	      # using -Wl,-lname, so that libtool does not consider it
	      # for duplicate removal.
              case " $specialdeplibs " in
              *" $deplib "*) new_libs="$deplib $new_libs" ;;
              *)
                case " $new_libs " in
                *" $deplib "*) ;;
                *) new_libs="$deplib $new_libs" ;;
                esac
                ;;
              esac
              ;;
            esac
	  done
	  tmp_libs=
	  for deplib in $new_libs; do
	    case $deplib in
	    -L*)
	      case " $tmp_libs " in
	      *" $deplib "*) ;;
................................................................................
	      esac
	      ;;
	    *) tmp_libs="$tmp_libs $deplib" ;;
	    esac
	  done
	  eval $var=\"$tmp_libs\"
	done # for var





      fi
    done # for pass
    if test $linkmode = prog; then
      dlfiles="$newdlfiles"
      dlprefiles="$newdlprefiles"
    fi

    case $linkmode in
    oldlib)
      if test -n "$deplibs"; then
	$echo "$modename: warning: \`-l' and \`-L' are ignored for archives" 1>&2
      fi

      if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
	$echo "$modename: warning: \`-dlopen' is ignored for archives" 1>&2
      fi

      if test -n "$rpath"; then
	$echo "$modename: warning: \`-rpath' is ignored for archives" 1>&2
      fi
................................................................................
      fi
      install_libdir="$2"

      oldlibs=
      if test -z "$rpath"; then
	if test "$build_libtool_libs" = yes; then
	  # Building a libtool convenience library.
	  # Some compilers have problems with a `.al' extension so
          # convenience libraries should have the same extension an
          # archive normally would.
	  oldlibs="$output_objdir/$libname.$libext $oldlibs"
	  build_libtool_libs=convenience
	  build_old_libs=yes
	fi

	if test -n "$vinfo"; then
	  $echo "$modename: warning: \`-version-info' is ignored for convenience libraries" 1>&2
................................................................................

	if test -n "$release"; then
	  $echo "$modename: warning: \`-release' is ignored for convenience libraries" 1>&2
	fi
      else

	# Parse the version information argument.
	IFS="${IFS= 	}"; save_ifs="$IFS"; IFS=':'
	set dummy $vinfo 0 0 0
	IFS="$save_ifs"

	if test -n "$8"; then
	  $echo "$modename: too many parameters to \`-version-info'" 1>&2
	  $echo "$help" 1>&2
	  exit 1
................................................................................
	  ;;

	freebsd-elf)
	  major=".$current"
	  versuffix=".$current";
	  ;;

	irix)
	  major=`expr $current - $age + 1`





	  verstring="sgi$major.$revision"

	  # Add in all the interfaces that we are compatible with.
	  loop=$revision
	  while test $loop != 0; do
	    iface=`expr $revision - $loop`
	    loop=`expr $loop - 1`
	    verstring="sgi$major.$iface:$verstring"
	  done

	  # Before this point, $major must not contain `.'.
	  major=.$major
	  versuffix="$major.$revision"
	  ;;

	linux)
	  major=.`expr $current - $age`
	  versuffix="$major.$age.$revision"
	  ;;

	osf)
	  major=`expr $current - $age`
	  versuffix=".$current.$age.$revision"
	  verstring="$current.$age.$revision"

	  # Add in all the interfaces that we are compatible with.
	  loop=$age
	  while test $loop != 0; do
	    iface=`expr $current - $loop`
................................................................................
	  ;;
	esac

	# Clear the version info if we defaulted, and they specified a release.
	if test -z "$vinfo" && test -n "$release"; then
	  major=
	  verstring="0.0"










	  if test "$need_version" = no; then
	    versuffix=
	  else
	    versuffix=".0.0"
	  fi
	fi

................................................................................
	else
	  # Don't allow undefined symbols.
	  allow_undefined_flag="$no_undefined_flag"
	fi
      fi

      if test "$mode" != relink; then
	# Remove our outputs, but don't remove object files since they
        # may have been created when compiling PIC objects.
        removelist=
        tempremovelist=`echo "$output_objdir/*"`
	for p in $tempremovelist; do
          case $p in
            *.$objext)
               ;;
            $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/${libname}${release}.*)
               removelist="$removelist $p"
               ;;
            *) ;;
          esac
        done
        if test -n "$removelist"; then
	  $show "${rm}r $removelist"
	  $run ${rm}r $removelist
        fi
      fi

      # Now set the variables for building old libraries.
      if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then
	oldlibs="$oldlibs $output_objdir/$libname.$libext"

	# Transform .lo files to .o files.
	oldobjs="$objs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e "$lo2o" | $NL2SP`
      fi

      # Eliminate all temporary directories.
      for path in $notinst_path; do
	lib_search_path=`echo "$lib_search_path " | sed -e 's% $path % %g'`
	deplibs=`echo "$deplibs " | sed -e 's% -L$path % %g'`
	dependency_libs=`echo "$dependency_libs " | sed -e 's% -L$path % %g'`
      done

      if test -n "$xrpath"; then
	# If the user specified any rpath flags, then add them.
	temp_xrpath=
	for libdir in $xrpath; do
	  temp_xrpath="$temp_xrpath -R$libdir"
................................................................................
	  *-*-rhapsody* | *-*-darwin1.[012])
	    # Rhapsody C library is in the System framework
	    deplibs="$deplibs -framework System"
	    ;;
	  *-*-netbsd*)
	    # Don't link with libc until the a.out ld.so is fixed.
	    ;;
          *-*-openbsd*)
	    # OpenBSD uses either libc or libc_r.
            ;;
 	  *)
	    # Add libc to deplibs on all other systems if necessary.
	    if test $build_libtool_need_lc = "yes"; then
	      deplibs="$deplibs -lc"
	    fi
	    ;;
	  esac
	fi
................................................................................
	  # against the deplibs as a proxy for the library.  Then we can check
	  # whether they linked in statically or dynamically with ldd.
	  $rm conftest.c
	  cat > conftest.c <<EOF
	  int main() { return 0; }
EOF
	  $rm conftest
	  $LTCC -o conftest conftest.c $deplibs
	  if test $? -eq 0 ; then
	    ldd_output=`ldd conftest`
	    for i in $deplibs; do
	      name="`expr $i : '-l\(.*\)'`"
	      # If $name is empty we are operating on a -L argument.
	      if test "$name" != "" -a "$name" != "0"; then
		libname=`eval \\$echo \"$libname_spec\"`
		deplib_matches=`eval \\$echo \"$library_names_spec\"`
		set dummy $deplib_matches
		deplib_match=$2
		if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
		  newdeplibs="$newdeplibs $i"
		else
		  droppeddeps=yes
		  echo
		  echo "*** Warning: This library needs some functionality provided by $i."
		  echo "*** I have the capability to make that library automatically link in when"
		  echo "*** you link to this library.  But I can only do this if you have a"
		  echo "*** shared version of the library, which you do not appear to have."


		fi
	      else
		newdeplibs="$newdeplibs $i"
	      fi
	    done
	  else
	    # Error occured in the first compile.  Let's try to salvage the situation:
	    # Compile a seperate program for each library.
	    for i in $deplibs; do
	      name="`expr $i : '-l\(.*\)'`"
	     # If $name is empty we are operating on a -L argument.
	      if test "$name" != "" -a "$name" != "0"; then
		$rm conftest
		$LTCC -o conftest conftest.c $i
		# Did it work?
		if test $? -eq 0 ; then
		  ldd_output=`ldd conftest`
		  libname=`eval \\$echo \"$libname_spec\"`
		  deplib_matches=`eval \\$echo \"$library_names_spec\"`
		  set dummy $deplib_matches
		  deplib_match=$2
		  if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
		    newdeplibs="$newdeplibs $i"
		  else
		    droppeddeps=yes
		    echo
		    echo "*** Warning: This library needs some functionality provided by $i."
		    echo "*** I have the capability to make that library automatically link in when"
		    echo "*** you link to this library.  But I can only do this if you have a"
		    echo "*** shared version of the library, which you do not appear to have."


		  fi
		else
		  droppeddeps=yes
		  echo
		  echo "*** Warning!  Library $i is needed by this library but I was not able to"
		  echo "***  make it link in!  You will probably need to install it or some"
		  echo "*** library that it depends on before this library will be fully"
................................................................................
	  ;;
	file_magic*)
	  set dummy $deplibs_check_method
	  file_magic_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"`
	  for a_deplib in $deplibs; do
	    name="`expr $a_deplib : '-l\(.*\)'`"
	    # If $name is empty we are operating on a -L argument.
	    if test "$name" != "" -a "$name" != "0"; then
	      libname=`eval \\$echo \"$libname_spec\"`
	      for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
		    potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
		    for potent_lib in $potential_libs; do
		      # Follow soft links.
		      if ls -lLd "$potent_lib" 2>/dev/null \
			 | grep " -> " >/dev/null; then
................................................................................
		      # The statement above tries to avoid entering an
		      # endless loop below, in case of cyclic links.
		      # We might still enter an endless loop, since a link
		      # loop can be closed while we follow links,
		      # but so what?
		      potlib="$potent_lib"
		      while test -h "$potlib" 2>/dev/null; do
			potliblink=`ls -ld $potlib | sed 's/.* -> //'`
			case $potliblink in
			[\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";;
			*) potlib=`$echo "X$potlib" | $Xsed -e 's,[^/]*$,,'`"$potliblink";;
			esac
		      done
		      if eval $file_magic_cmd \"\$potlib\" 2>/dev/null \
			 | sed 10q \
			 | egrep "$file_magic_regex" > /dev/null; then
			newdeplibs="$newdeplibs $a_deplib"
			a_deplib=""
			break 2
		      fi
		    done
	      done
	      if test -n "$a_deplib" ; then
		droppeddeps=yes
		echo
		echo "*** Warning: This library needs some functionality provided by $a_deplib."
		echo "*** I have the capability to make that library automatically link in when"
		echo "*** you link to this library.  But I can only do this if you have a"
		echo "*** shared version of the library, which you do not appear to have."







	      fi
	    else
	      # Add a -L argument.
	      newdeplibs="$newdeplibs $a_deplib"
	    fi
	  done # Gone through all deplibs.
	  ;;
................................................................................
	    name="`expr $a_deplib : '-l\(.*\)'`"
	    # If $name is empty we are operating on a -L argument.
	    if test -n "$name" && test "$name" != "0"; then
	      libname=`eval \\$echo \"$libname_spec\"`
	      for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
		potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
		for potent_lib in $potential_libs; do

		  if eval echo \"$potent_lib\" 2>/dev/null \
		      | sed 10q \
		      | egrep "$match_pattern_regex" > /dev/null; then
		    newdeplibs="$newdeplibs $a_deplib"
		    a_deplib=""
		    break 2
		  fi
		done
	      done
	      if test -n "$a_deplib" ; then
		droppeddeps=yes
		echo
		echo "*** Warning: This library needs some functionality provided by $a_deplib."
		echo "*** I have the capability to make that library automatically link in when"
		echo "*** you link to this library.  But I can only do this if you have a"
		echo "*** shared version of the library, which you do not appear to have."







	      fi
	    else
	      # Add a -L argument.
	      newdeplibs="$newdeplibs $a_deplib"
	    fi
	  done # Gone through all deplibs.
	  ;;
................................................................................
	shift; shift

	if test -n "$soname_spec"; then
	  eval soname=\"$soname_spec\"
	else
	  soname="$realname"
	fi
	if test x$dlname = x; then
	  dlname=$soname
	fi

	lib="$output_objdir/$realname"
	for link
	do
	  linknames="$linknames $link"
	done


















	# Use standard objects if they are pic
	test -z "$pic_flag" && libobjs=`$echo "X$libobjs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`

	# Prepare the list of exported symbols
	if test -z "$export_symbols"; then
	  if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then
	    $show "generating symbol list for \`$libname.la'"
	    export_symbols="$output_objdir/$libname.exp"
	    $run $rm $export_symbols
	    eval cmds=\"$export_symbols_cmds\"
	    IFS="${IFS= 	}"; save_ifs="$IFS"; IFS='~'
	    for cmd in $cmds; do
	      IFS="$save_ifs"
	      $show "$cmd"
	      $run eval "$cmd" || exit $?
	    done
	    IFS="$save_ifs"
	    if test -n "$export_symbols_regex"; then
................................................................................

	if test -n "$export_symbols" && test -n "$include_expsyms"; then
	  $run eval '$echo "X$include_expsyms" | $SP2NL >> "$export_symbols"'
	fi

	if test -n "$convenience"; then
	  if test -n "$whole_archive_flag_spec"; then
	    save_libobjs=$libobjs
	    eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
	  else
	    gentop="$output_objdir/${outputname}x"
	    $show "${rm}r $gentop"
	    $run ${rm}r "$gentop"
	    $show "$mkdir $gentop"
	    $run $mkdir "$gentop"
	    status=$?
	    if test $status -ne 0 && test ! -d "$gentop"; then
	      exit $status
	    fi
	    generated="$generated $gentop"

	    for xlib in $convenience; do
................................................................................
	      *) xabs=`pwd`"/$xlib" ;;
	      esac
	      xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'`
	      xdir="$gentop/$xlib"

	      $show "${rm}r $xdir"
	      $run ${rm}r "$xdir"
	      $show "$mkdir $xdir"
	      $run $mkdir "$xdir"
	      status=$?
	      if test $status -ne 0 && test ! -d "$xdir"; then
		exit $status
	      fi
	      $show "(cd $xdir && $AR x $xabs)"
	      $run eval "(cd \$xdir && $AR x \$xabs)" || exit $?

	      libobjs="$libobjs "`find $xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP`
	    done
	  fi
	fi

	if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then
	  eval flag=\"$thread_safe_flag_spec\"
	  linker_flags="$linker_flags $flag"
................................................................................
	  $run eval '(cd $output_objdir && $rm ${realname}U && $mv $realname ${realname}U)' || exit $?
	fi

	# Do each of the archive commands.
	if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
	  eval cmds=\"$archive_expsym_cmds\"
	else
	  eval cmds=\"$archive_cmds\"
	fi


        if len=`expr "X$cmds" : ".*"` &&
           test $len -le $max_cmd_len || test $max_cmd_len -le -1; then
          :
        else
	  # The command line is too long to link in one step, link piecewise.
          $echo "creating reloadable object files..."

	  # Save the value of $output and $libobjs because we want to
	  # use them later.  If we have whole_archive_flag_spec, we
	  # want to use save_libobjs as it was before
	  # whole_archive_flag_spec was expanded, because we can't
	  # assume the linker understands whole_archive_flag_spec.
	  # This may have to be revisited, in case too many
	  # convenience libraries get linked in and end up exceeding
	  # the spec.
	  if test -z "$convenience" || test -z "$whole_archive_flag_spec"; then
	    save_libobjs=$libobjs

	  fi
          save_output=$output

	  # Clear the reloadable object creation command queue and
	  # initialize k to one.
          test_cmds=
          concat_cmds=
          objlist=
          delfiles=
          last_robj=
          k=1
          output=$output_objdir/$save_output-${k}.$objext
	  # Loop over the list of objects to be linked.
          for obj in $save_libobjs
          do
            eval test_cmds=\"$reload_cmds $objlist $last_robj\"
            if test "X$objlist" = X ||
	       { len=`expr "X$test_cmds" : ".*"` &&
                 test $len -le $max_cmd_len; }; then
              objlist="$objlist $obj"
            else
	      # The command $test_cmds is almost too long, add a
	      # command to the queue.
              if test $k -eq 1 ; then
	        # The first file doesn't have a previous command to add.
                eval concat_cmds=\"$reload_cmds $objlist $last_robj\"
              else
	        # All subsequent reloadable object files will link in
	        # the last one created.
                eval concat_cmds=\"\$concat_cmds~$reload_cmds $objlist $last_robj\"
              fi
              last_robj=$output_objdir/$save_output-${k}.$objext
              k=`expr $k + 1`
              output=$output_objdir/$save_output-${k}.$objext
              objlist=$obj
              len=1
            fi
          done
	  # Handle the remaining objects by creating one last
	  # reloadable object file.  All subsequent reloadable object
	  # files will link in the last one created.
	  test -z "$concat_cmds" || concat_cmds=$concat_cmds~
          eval concat_cmds=\"\${concat_cmds}$reload_cmds $objlist $last_robj\"

	  # Set up a command to remove the reloadale object files
	  # after they are used.
          i=0
          while test $i -lt $k
          do
            i=`expr $i + 1`
            delfiles="$delfiles $output_objdir/$save_output-${i}.$objext"

          done

          $echo "creating a temporary reloadable object file: $output"

	  # Loop through the commands generated above and execute them.
          IFS="${IFS= 	}"; save_ifs="$IFS"; IFS='~'
          for cmd in $concat_cmds; do
            IFS="$save_ifs"
            $show "$cmd"
            $run eval "$cmd" || exit $?
          done
          IFS="$save_ifs"

          libobjs=$output
	  # Restore the value of output.
          output=$save_output

	  if test -n "$convenience" && test -n "$whole_archive_flag_spec"; then
	    eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
	  fi
	  # Expand the library linking commands again to reset the
	  # value of $libobjs for piecewise linking.

	  # Do each of the archive commands.
          if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
            eval cmds=\"$archive_expsym_cmds\"
          else
            eval cmds=\"$archive_cmds\"

          fi

	  # Append the command to remove the reloadable object files
	  # to the just-reset $cmds.
          eval cmds=\"\$cmds~$rm $delfiles\"
        fi
        IFS="${IFS= 	}"; save_ifs="$IFS"; IFS='~'
        for cmd in $cmds; do
          IFS="$save_ifs"
          $show "$cmd"
          $run eval "$cmd" || exit $?
        done
        IFS="$save_ifs"

	# Restore the uninstalled library and exit
	if test "$mode" = relink; then
	  $run eval '(cd $output_objdir && $rm ${realname}T && $mv $realname ${realname}T && $mv "$realname"U $realname)' || exit $?
	  exit 0
	fi

................................................................................
      if test -n "$convenience"; then
	if test -n "$whole_archive_flag_spec"; then
	  eval reload_conv_objs=\"\$reload_objs $whole_archive_flag_spec\"
	else
	  gentop="$output_objdir/${obj}x"
	  $show "${rm}r $gentop"
	  $run ${rm}r "$gentop"
	  $show "$mkdir $gentop"
	  $run $mkdir "$gentop"
	  status=$?
	  if test $status -ne 0 && test ! -d "$gentop"; then
	    exit $status
	  fi
	  generated="$generated $gentop"

	  for xlib in $convenience; do
................................................................................
	    *) xabs=`pwd`"/$xlib" ;;
	    esac
	    xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'`
	    xdir="$gentop/$xlib"

	    $show "${rm}r $xdir"
	    $run ${rm}r "$xdir"
	    $show "$mkdir $xdir"
	    $run $mkdir "$xdir"
	    status=$?
	    if test $status -ne 0 && test ! -d "$xdir"; then
	      exit $status
	    fi
	    $show "(cd $xdir && $AR x $xabs)"
	    $run eval "(cd \$xdir && $AR x \$xabs)" || exit $?

	    reload_conv_objs="$reload_objs "`find $xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP`
	  done
	fi
      fi

      # Create the old-style object.
      reload_objs="$objs$old_deplibs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}$'/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test

      output="$obj"
      eval cmds=\"$reload_cmds\"
      IFS="${IFS= 	}"; save_ifs="$IFS"; IFS='~'
      for cmd in $cmds; do
	IFS="$save_ifs"
	$show "$cmd"
	$run eval "$cmd" || exit $?
      done
      IFS="$save_ifs"

................................................................................
	if test -n "$gentop"; then
	  $show "${rm}r $gentop"
	  $run ${rm}r $gentop
	fi

	# Create an invalid libtool object if no PIC, so that we don't
	# accidentally link it into a program.
	# $show "echo timestamp > $libobj"
	# $run eval "echo timestamp > $libobj" || exit $?
	exit 0
      fi

      if test -n "$pic_flag" || test "$pic_mode" != default; then
	# Only do commands if we really have different PIC objects.
	reload_objs="$libobjs $reload_conv_objs"
	output="$libobj"
	eval cmds=\"$reload_cmds\"
	IFS="${IFS= 	}"; save_ifs="$IFS"; IFS='~'
	for cmd in $cmds; do
	  IFS="$save_ifs"
	  $show "$cmd"
	  $run eval "$cmd" || exit $?
	done
	IFS="$save_ifs"














      fi

      if test -n "$gentop"; then
	$show "${rm}r $gentop"
	$run ${rm}r $gentop
      fi

      exit 0
      ;;

    prog)
      case $host in
	*cygwin*) output=`echo $output | sed -e 's,.exe$,,;s,$,.exe,'` ;;
      esac
      if test -n "$vinfo"; then
	$echo "$modename: warning: \`-version-info' is ignored for programs" 1>&2
      fi

      if test -n "$release"; then
	$echo "$modename: warning: \`-release' is ignored for programs" 1>&2
................................................................................
      fi

      case $host in
      *-*-rhapsody* | *-*-darwin1.[012])
	# On Rhapsody replace the C library is the System framework
	compile_deplibs=`$echo "X $compile_deplibs" | $Xsed -e 's/ -lc / -framework System /'`
	finalize_deplibs=`$echo "X $finalize_deplibs" | $Xsed -e 's/ -lc / -framework System /'`







	;;
      esac

      compile_command="$compile_command $compile_deplibs"
      finalize_command="$finalize_command $finalize_deplibs"

      if test -n "$rpath$xrpath"; then
................................................................................
	      $run eval '$mv "$nlist"T "$nlist"'
	    fi

	    # Prepare the list of exported symbols
	    if test -z "$export_symbols"; then
	      export_symbols="$output_objdir/$output.exp"
	      $run $rm $export_symbols
	      $run eval "sed -n -e '/^: @PROGRAM@$/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"'
	    else
	      $run eval "sed -e 's/\([][.*^$]\)/\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$output.exp"'
	      $run eval 'grep -f "$output_objdir/$output.exp" < "$nlist" > "$nlist"T'
	      $run eval 'mv "$nlist"T "$nlist"'
	    fi
	  fi

	  for arg in $dlprefiles; do
	    $show "extracting global C symbols from \`$arg'"
	    name=`echo "$arg" | sed -e 's%^.*/%%'`
	    $run eval 'echo ": $name " >> "$nlist"'
	    $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'"
	  done

	  if test -z "$run"; then
	    # Make sure we have at least an empty file.
	    test -f "$nlist" || : > "$nlist"
................................................................................

	    if test -n "$exclude_expsyms"; then
	      egrep -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T
	      $mv "$nlist"T "$nlist"
	    fi

	    # Try sorting and uniquifying the output.
	    if grep -v "^: " < "$nlist" | sort +2 | uniq > "$nlist"S; then






	      :
	    else
	      grep -v "^: " < "$nlist" > "$nlist"S
	    fi

	    if test -f "$nlist"S; then
	      eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$dlsyms"'
................................................................................
	  # a FreeBSD bug that causes programs to crash when -lm is
	  # linked before any other PIC object.  But we must not use
	  # pic_flag when linking with -static.  The problem exists in
	  # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1.
	  *-*-freebsd2*|*-*-freebsd3.0*|*-*-freebsdelf3.0*)
	    case "$compile_command " in
	    *" -static "*) ;;
	    *) pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND";;
	    esac;;
	  *-*-hpux*)
	    case "$compile_command " in
	    *" -static "*) ;;
	    *) pic_flag_for_symtable=" $pic_flag";;
	    esac
	  esac

	  # Now compile the dynamic symbol file.
	  $show "(cd $output_objdir && $LTCC -c$no_builtin_flag$pic_flag_for_symtable \"$dlsyms\")"
	  $run eval '(cd $output_objdir && $LTCC -c$no_builtin_flag$pic_flag_for_symtable "$dlsyms")' || exit $?

	  # Clean up the generated files.
	  $show "$rm $output_objdir/$dlsyms $nlist ${nlist}S ${nlist}T"
	  $run $rm "$output_objdir/$dlsyms" "$nlist" "${nlist}S" "${nlist}T"

	  # Transform the symbol file into the correct name.
	  compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"`
................................................................................
	  elif eval var_value=\$$var; test -z "$var_value"; then
	    relink_command="$var=; export $var; $relink_command"
	  else
	    var_value=`$echo "X$var_value" | $Xsed -e "$sed_quote_subst"`
	    relink_command="$var=\"$var_value\"; export $var; $relink_command"
	  fi
	done
	relink_command="cd `pwd`; $relink_command"
	relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"`
      fi

      # Quote $echo for shipping.
      if test "X$echo" = "X$SHELL $0 --fallback-echo"; then
	case $0 in
	[\\/]* | [A-Za-z]:[\\/]*) qecho="$SHELL $0 --fallback-echo";;
................................................................................
      fi

      # Only actually do things if our run command is non-null.
      if test -z "$run"; then
	# win32 will think the script is a binary if it has
	# a .exe suffix, so we strip it off here.
	case $output in
	  *.exe) output=`echo $output|sed 's,.exe$,,'` ;;
	esac
	# test for cygwin because mv fails w/o .exe extensions
	case $host in
	  *cygwin*) exeext=.exe ;;
	  *) exeext= ;;
	esac
	$rm $output
................................................................................
# libraries that it depends on are installed.
#
# This wrapper script should never be moved out of the build directory.
# If it is, it will not operate correctly.

# Sed substitution that helps us do robust quoting.  It backslashifies
# metacharacters that are still active within double-quoted strings.
Xsed='sed -e 1s/^X//'
sed_quote_subst='$sed_quote_subst'

# The HP-UX ksh and POSIX shell print the target directory to stdout
# if CDPATH is set.
if test \"\${CDPATH+set}\" = set; then CDPATH=:; export CDPATH; fi

relink_command=\"$relink_command\"
................................................................................
	$echo >> $output "\

  # Find the directory that this script lives in.
  thisdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*$%%'\`
  test \"x\$thisdir\" = \"x\$file\" && thisdir=.

  # Follow symbolic links until we get to the real thisdir.
  file=\`ls -ld \"\$file\" | sed -n 's/.*-> //p'\`
  while test -n \"\$file\"; do
    destdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*\$%%'\`

    # If there was a directory component, then change thisdir.
    if test \"x\$destdir\" != \"x\$file\"; then
      case \"\$destdir\" in
      [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;;
      *) thisdir=\"\$thisdir/\$destdir\" ;;
      esac
    fi

    file=\`\$echo \"X\$file\" | \$Xsed -e 's%^.*/%%'\`
    file=\`ls -ld \"\$thisdir/\$file\" | sed -n 's/.*-> //p'\`
  done

  # Try to get the absolute directory name.
  absdir=\`cd \"\$thisdir\" && pwd\`
  test -n \"\$absdir\" && thisdir=\"\$absdir\"
"

	if test "$fast_install" = yes; then
	  echo >> $output "\
  program=lt-'$outputname'$exeext
  progdir=\"\$thisdir/$objdir\"

  if test ! -f \"\$progdir/\$program\" || \\
     { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | sed 1q\`; \\
       test \"X\$file\" != \"X\$progdir/\$program\"; }; then

    file=\"\$\$-\$program\"

    if test ! -d \"\$progdir\"; then
      $mkdir \"\$progdir\"
    else
................................................................................

	  echo >> $output "\

    # relink executable if necessary
    if test -n \"\$relink_command\"; then
      if relink_command_output=\`eval \$relink_command 2>&1\`; then :
      else
        $echo \"\$relink_command_output\" >&2
	$rm \"\$progdir/\$file\"
	exit 1
      fi
    fi

    $mv \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null ||
    { $rm \"\$progdir/\$program\";
................................................................................
	# Export our shlibpath_var if we have one.
	if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
	  $echo >> $output "\
    # Add our own library path to $shlibpath_var
    $shlibpath_var=\"$temp_rpath\$$shlibpath_var\"

    # Some systems cannot cope with colon-terminated $shlibpath_var
    # The second colon is a workaround for a bug in BeOS R4 sed
    $shlibpath_var=\`\$echo \"X\$$shlibpath_var\" | \$Xsed -e 's/::*\$//'\`

    export $shlibpath_var
"
	fi

	# fixup the dll searchpath if we need to.
................................................................................
	addlibs="$convenience"
	build_libtool_libs=no
      else
	if test "$build_libtool_libs" = module; then
	  oldobjs="$libobjs_save"
	  build_libtool_libs=no
	else
	  oldobjs="$objs$old_deplibs $non_pic_objects"
	fi
	addlibs="$old_convenience"
      fi

      if test -n "$addlibs"; then
	gentop="$output_objdir/${outputname}x"
	$show "${rm}r $gentop"
	$run ${rm}r "$gentop"
	$show "$mkdir $gentop"
	$run $mkdir "$gentop"
	status=$?
	if test $status -ne 0 && test ! -d "$gentop"; then
	  exit $status
	fi
	generated="$generated $gentop"

	# Add in members from convenience archives.
................................................................................
	  *) xabs=`pwd`"/$xlib" ;;
	  esac
	  xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'`
	  xdir="$gentop/$xlib"

	  $show "${rm}r $xdir"
	  $run ${rm}r "$xdir"
	  $show "$mkdir $xdir"
	  $run $mkdir "$xdir"
	  status=$?
	  if test $status -ne 0 && test ! -d "$xdir"; then
	    exit $status
	  fi
	  $show "(cd $xdir && $AR x $xabs)"
	  $run eval "(cd \$xdir && $AR x \$xabs)" || exit $?

................................................................................
	done
      fi

      # Do each command in the archive commands.
      if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then
	eval cmds=\"$old_archive_from_new_cmds\"
      else
	eval cmds=\"$old_archive_cmds\"


        if len=`expr "X$cmds" : ".*"` &&
             test $len -le $max_cmd_len || test $max_cmd_len -le -1; then
          :




        else
          # the command line is too long to link in one step, link in parts
          $echo "using piecewise archive linking..."
	  save_RANLIB=$RANLIB
	  RANLIB=:
          objlist=

          concat_cmds=
          save_oldobjs=$oldobjs
          for obj in $save_oldobjs
          do
            oldobjs="$objlist $obj"
            objlist="$objlist $obj"
            eval test_cmds=\"$old_archive_cmds\"
            if len=`expr "X$test_cmds" : ".*"` &&
               test $len -le $max_cmd_len; then
              :
            else
              # the above command should be used before it gets too long
              oldobjs=$objlist
	      test -z "$concat_cmds" || concat_cmds=$concat_cmds~
              eval concat_cmds=\"\${concat_cmds}$old_archive_cmds\"
              objlist=
            fi
          done
	  RANLIB=$save_RANLIB
          oldobjs=$objlist

          eval cmds=\"\$concat_cmds~$old_archive_cmds\"
        fi
      fi
      IFS="${IFS= 	}"; save_ifs="$IFS"; IFS='~'
      for cmd in $cmds; do
	IFS="$save_ifs"
	$show "$cmd"
	$run eval "$cmd" || exit $?
      done
      IFS="$save_ifs"
    done
................................................................................
	  relink_command="$var=; export $var; $relink_command"
	else
	  var_value=`$echo "X$var_value" | $Xsed -e "$sed_quote_subst"`
	  relink_command="$var=\"$var_value\"; export $var; $relink_command"
	fi
      done
      # Quote the link command for shipping.
      relink_command="cd `pwd`; $SHELL $0 --mode=relink $libtool_args"
      relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"`

      # Only create the output if not a dry run.
      if test -z "$run"; then
	for installed in no yes; do
	  if test "$installed" = yes; then
	    if test -z "$install_libdir"; then
................................................................................
	    output="$output_objdir/$outputname"i
	    # Replace all uninstalled libtool libraries with the installed ones
	    newdependency_libs=
	    for deplib in $dependency_libs; do
	      case $deplib in
	      *.la)
		name=`$echo "X$deplib" | $Xsed -e 's%^.*/%%'`
		eval libdir=`sed -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
		if test -z "$libdir"; then
		  $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2
		  exit 1
		fi
		newdependency_libs="$newdependency_libs $libdir/$name"
		;;
	      *) newdependency_libs="$newdependency_libs $deplib" ;;
	      esac
	    done
	    dependency_libs="$newdependency_libs"
	    newdlfiles=
	    for lib in $dlfiles; do
	      name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'`
	      eval libdir=`sed -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
	      if test -z "$libdir"; then
		$echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
		exit 1
	      fi
	      newdlfiles="$newdlfiles $libdir/$name"
	    done
	    dlfiles="$newdlfiles"
	    newdlprefiles=
	    for lib in $dlprefiles; do
	      name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'`
	      eval libdir=`sed -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
	      if test -z "$libdir"; then
		$echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
		exit 1
	      fi
	      newdlprefiles="$newdlprefiles $libdir/$name"
	    done
	    dlprefiles="$newdlprefiles"
................................................................................
      *.$libext)
	# Do the static libraries later.
	staticlibs="$staticlibs $file"
	;;

      *.la)
	# Check to see that this really is a libtool archive.
	if (sed -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
	else
	  $echo "$modename: \`$file' is not a valid libtool archive" 1>&2
	  $echo "$help" 1>&2
	  exit 1
	fi

	library_names=
................................................................................
	fi

	dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`/
	test "X$dir" = "X$file/" && dir=
	dir="$dir$objdir"

	if test -n "$relink_command"; then


















	  $echo "$modename: warning: relinking \`$file'" 1>&2
	  $show "$relink_command"
	  if $run eval "$relink_command"; then :
	  else
	    $echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2
	    continue
	  fi
	fi

	# See the names of the shared library.
	set dummy $library_names
	if test -n "$2"; then
	  realname="$2"
................................................................................
	      fi
	    done
	  fi

	  # Do each command in the postinstall commands.
	  lib="$destdir/$realname"
	  eval cmds=\"$postinstall_cmds\"
	  IFS="${IFS= 	}"; save_ifs="$IFS"; IFS='~'
	  for cmd in $cmds; do
	    IFS="$save_ifs"
	    $show "$cmd"
	    $run eval "$cmd" || exit $?
	  done
	  IFS="$save_ifs"
	fi
................................................................................
	  destfile="$destdir/$destname"
	else
	  destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
	  destfile="$destdir/$destfile"
	fi

	# Do a test to see if this is really a libtool program.








	if (sed -e '4q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
	  notinst_deplibs=
	  relink_command=

	  # If there is no directory component, then add one.
	  case $file in
	  */* | *\\*) . $file ;;
	  *) . ./$file ;;
	  esac

	  # Check the variables that should have been set.
	  if test -z "$notinst_deplibs"; then
	    $echo "$modename: invalid libtool wrapper script \`$file'" 1>&2
	    exit 1
	  fi

	  finalize=yes
	  for lib in $notinst_deplibs; do
	    # Check to see that each library is installed.
	    libdir=
................................................................................
	      finalize=no
	    fi
	  done

	  relink_command=
	  # If there is no directory component, then add one.
	  case $file in
	  */* | *\\*) . $file ;;
	  *) . ./$file ;;
	  esac

	  outputname=
	  if test "$fast_install" = no && test -n "$relink_command"; then
	    if test "$finalize" = yes && test -z "$run"; then
	      tmpdir="/tmp"
	      test -n "$TMPDIR" && tmpdir="$TMPDIR"
................................................................................
	    file=`$echo "X$file" | $Xsed -e "s%\([^/]*\)$%$objdir/\1%"`
	  fi
	fi

	# remove .exe since cygwin /usr/bin/install will append another
	# one anyways
	case $install_prog,$host in
	*/usr/bin/install*,*cygwin*)
	  case $file:$destfile in
	  *.exe:*.exe)
	    # this is ok
	    ;;
	  *.exe:*)
	    destfile=$destfile.exe
	    ;;
	  *:*.exe)
	    destfile=`echo $destfile | sed -e 's,.exe$,,'`
	    ;;
	  esac
	  ;;
	esac
	$show "$install_prog$stripme $file $destfile"
	$run eval "$install_prog\$stripme \$file \$destfile" || exit $?
	test -n "$outputname" && ${rm}r "$tmpdir"
................................................................................
      if test -n "$stripme" && test -n "$striplib"; then
	$show "$old_striplib $oldlib"
	$run eval "$old_striplib $oldlib" || exit $?
      fi

      # Do each command in the postinstall commands.
      eval cmds=\"$old_postinstall_cmds\"
      IFS="${IFS= 	}"; save_ifs="$IFS"; IFS='~'
      for cmd in $cmds; do
	IFS="$save_ifs"
	$show "$cmd"
	$run eval "$cmd" || exit $?
      done
      IFS="$save_ifs"
    done
................................................................................
	libdirs="$libdirs $dir"
      done

      for libdir in $libdirs; do
	if test -n "$finish_cmds"; then
	  # Do each command in the finish commands.
	  eval cmds=\"$finish_cmds\"
	  IFS="${IFS= 	}"; save_ifs="$IFS"; IFS='~'
	  for cmd in $cmds; do
	    IFS="$save_ifs"
	    $show "$cmd"
	    $run eval "$cmd" || admincmds="$admincmds
       $cmd"
	  done
	  IFS="$save_ifs"
................................................................................
	  $run eval "$cmds" || admincmds="$admincmds
       $cmds"
	fi
      done
    fi

    # Exit here if they wanted silent mode.
    test "$show" = : && exit 0

    echo "----------------------------------------------------------------------"
    echo "Libraries have been installed in:"
    for libdir in $libdirs; do
      echo "   $libdir"
    done
    echo
................................................................................
	exit 1
      fi

      dir=
      case $file in
      *.la)
	# Check to see that this really is a libtool archive.
	if (sed -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
	else
	  $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
	  $echo "$help" 1>&2
	  exit 1
	fi

	# Read the libtool library.
................................................................................
    args=
    for file
    do
      case $file in
      -*) ;;
      *)
	# Do a test to see if this is really a libtool program.
	if (sed -e '4q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
	  # If there is no directory component, then add one.
	  case $file in
	  */* | *\\*) . $file ;;
	  *) . ./$file ;;
	  esac

	  # Transform arg to wrapped name.
................................................................................
	LC_ALL="$save_LC_ALL"; export LC_ALL
      fi
      if test "${save_LANG+set}" = set; then
	LANG="$save_LANG"; export LANG
      fi

      # Now prepare to actually exec the command.
      exec_cmd='"$cmd"$args'
    else
      # Display what would be done.
      if test -n "$shlibpath_var"; then
	eval "\$echo \"\$shlibpath_var=\$$shlibpath_var\""
	$echo "export $shlibpath_var"
      fi
      $echo "$cmd$args"
................................................................................
	  *" $objdir "*) ;;
	  *) rmdirs="$rmdirs $objdir" ;;
	esac
      fi

      # Don't error if the file doesn't exist and rm -f was used.
      if (test -L "$file") >/dev/null 2>&1 \
        || (test -h "$file") >/dev/null 2>&1 \
	|| test -f "$file"; then
        :
      elif test -d "$file"; then
        exit_status=1
	continue
      elif test "$rmforce" = yes; then
        continue
      fi

      rmfiles="$file"

      case $name in
      *.la)
	# Possibly a libtool archive, so verify it.
	if (sed -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
	  . $dir/$name

	  # Delete the libtool libraries and symlinks.
	  for n in $library_names; do
	    rmfiles="$rmfiles $objdir/$n"
	  done
	  test -n "$old_library" && rmfiles="$rmfiles $objdir/$old_library"
	  test $mode = clean && rmfiles="$rmfiles $objdir/$name $objdir/${name}i"

	  if test $mode = uninstall; then
	    if test -n "$library_names"; then
	      # Do each command in the postuninstall commands.
	      eval cmds=\"$postuninstall_cmds\"
	      IFS="${IFS= 	}"; save_ifs="$IFS"; IFS='~'
	      for cmd in $cmds; do
		IFS="$save_ifs"
		$show "$cmd"
		$run eval "$cmd"
		if test $? != 0 && test "$rmforce" != yes; then
		  exit_status=1
		fi
................................................................................
	      done
	      IFS="$save_ifs"
	    fi

	    if test -n "$old_library"; then
	      # Do each command in the old_postuninstall commands.
	      eval cmds=\"$old_postuninstall_cmds\"
	      IFS="${IFS= 	}"; save_ifs="$IFS"; IFS='~'
	      for cmd in $cmds; do
		IFS="$save_ifs"
		$show "$cmd"
		$run eval "$cmd"
		if test $? != 0 && test "$rmforce" != yes; then
		  exit_status=1
		fi
................................................................................
	    fi
	    # FIXME: should reinstall the best remaining shared library.
	  fi
	fi
	;;

      *.lo)
	# Possibly a libtool object, so verify it.
	if (sed -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then

          # Read the .lo file
          . $dir/$name

	  # Add PIC object to the list of files to remove.
          if test -n "$pic_object" \
             && test "$pic_object" != none; then
	    rmfiles="$rmfiles $dir/$pic_object"
          fi

	  # Add non-PIC object to the list of files to remove.
          if test -n "$non_pic_object" \
             && test "$non_pic_object" != none; then
	    rmfiles="$rmfiles $dir/$non_pic_object"
          fi
	fi
	;;

      *)
	# Do a test to see if this is a libtool program.
	if test $mode = clean &&
	   (sed -e '4q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
	  relink_command=
	  . $dir/$file

	  rmfiles="$rmfiles $objdir/$name $objdir/${name}S.${objext}"
	  if test "$fast_install" = yes && test -n "$relink_command"; then
	    rmfiles="$rmfiles $objdir/lt-$name"
	  fi
................................................................................
-n, --dry-run         display commands without modifying any files
    --features        display basic configuration information and exit
    --finish          same as \`--mode=finish'
    --help            display this help message and exit
    --mode=MODE       use operation mode MODE [default=inferred from MODE-ARGS]
    --quiet           same as \`--silent'
    --silent          don't print informational messages
    --tag=TAG         use configuration variables from tag TAG
    --version         print version information

MODE must be one of the following:

      clean           remove files from the build directory
      compile         compile a source file into a libtool object
      execute         automatically set library path, then run a program
................................................................................
  -LLIBDIR          search LIBDIR for required installed libraries
  -lNAME            OUTPUT-FILE requires the installed library libNAME
  -module           build a library that can dlopened
  -no-fast-install  disable the fast-install mode
  -no-install       link a not-installable executable
  -no-undefined     declare that a library does not refer to external symbols
  -o OUTPUT-FILE    create OUTPUT-FILE from the specified objects
  -objectlist FILE  Use a list of object files found in FILE to specify objects
  -release RELEASE  specify package release information
  -rpath LIBDIR     the created library will eventually be installed in LIBDIR
  -R[ ]LIBDIR       add LIBDIR to the runtime path of programs and libraries
  -static           do not do any dynamic linking of libtool libraries
  -version-info CURRENT[:REVISION[:AGE]]
		    specify library version info [each variable defaults to 0]

................................................................................
esac

echo
$echo "Try \`$modename --help' for more information about other modes."

exit 0

# The TAGs below are defined such that we never get into a situation
# in which we disable both kinds of libraries.  Given conflicting
# choices, we go for a static library, that is the most portable,
# since we can't tell whether shared libraries were disabled because
# the user asked for that or because the platform doesn't support
# them.  This is particularly important on AIX, because we don't
# support having both static and shared libraries enabled at the same
# time on that platform, so we default to a shared-only configuration.
# If a disable-shared tag is given, we'll fallback to a static-only
# configuration.  But we'll never go from static-only to shared-only.

# ### BEGIN LIBTOOL TAG CONFIG: disable-shared
build_libtool_libs=no
build_old_libs=yes
# ### END LIBTOOL TAG CONFIG: disable-shared

# ### BEGIN LIBTOOL TAG CONFIG: disable-static
build_old_libs=`case $build_libtool_libs in yes) echo no;; *) echo yes;; esac`
# ### END LIBTOOL TAG CONFIG: disable-static

# Local Variables:
# mode:shell-script
# sh-indentation:2
# End:
# ### BEGIN LIBTOOL TAG CONFIG: CXX

# Libtool was configured on host alice:

# Shell to use when invoking shell scripts.
SHELL="/bin/sh"

# Whether or not to build shared libraries.
build_libtool_libs=yes

# Whether or not to build static libraries.
build_old_libs=yes

# Whether or not to add -lc for building shared libraries.
build_libtool_need_lc=yes

# Whether or not to optimize for fast installation.
fast_install=yes

# The host system.
host_alias=
host=i686-pc-linux-gnu

# An echo program that does not interpret backslashes.
echo="echo"

# The archiver.
AR="ar"
AR_FLAGS="cru"

# A C compiler.
LTCC=gcc

# A language-specific compiler.
CC="g++"

# Is the compiler the GNU C compiler?
with_gcc=yes

# The linker used to build libraries.
LD="/usr/bin/ld"

# Whether we need hard or soft links.
LN_S="ln -s"

# A BSD-compatible nm program.
NM="/usr/bin/nm -B"

# A symbol stripping program
STRIP=strip

# Used to examine libraries when file_magic_cmd begins "file"
MAGIC_CMD=file

# Used on cygwin: DLL creation program.
DLLTOOL="dlltool"

# Used on cygwin: object dumper.
OBJDUMP="objdump"

# Used on cygwin: assembler.
AS="as"

# The name of the directory that contains temporary libtool files.
objdir=.libs

# How to create reloadable object files.
reload_flag=" -r"
reload_cmds="\$LD\$reload_flag -o \$output\$reload_objs"

# How to pass a linker flag through the compiler.
wl="-Wl,"

# Object file suffix (normally "o").
objext="o"

# Old archive suffix (normally "a").
libext="a"

# Executable file suffix (normally "").
exeext=""

# Additional compiler flags for building library objects.
pic_flag=" -fPIC -DPIC"
pic_mode=default

# What is the maximum length of a command?
max_cmd_len=49153

# Does compiler simultaneously support -c and -o options?
compiler_c_o="yes"

# Must we lock files when doing compilation ?
need_locks="no"

# Do we need the lib prefix for modules?
need_lib_prefix=no

# Do we need a version for libraries?
need_version=no

# Whether dlopen is supported.
dlopen_support=unknown

# Whether dlopen of programs is supported.
dlopen_self=unknown

# Whether dlopen of statically linked programs is supported.
dlopen_self_static=unknown

# Compiler flag to prevent dynamic linking.
link_static_flag="-static"

# Compiler flag to turn off builtin functions.
no_builtin_flag=" -fno-builtin"

# Compiler flag to allow reflexive dlopens.
export_dynamic_flag_spec="\${wl}--export-dynamic"

# Compiler flag to generate shared objects directly from archives.
whole_archive_flag_spec="\${wl}--whole-archive\$convenience \${wl}--no-whole-archive"

# Compiler flag to generate thread-safe objects.
thread_safe_flag_spec=""

# Library versioning type.
version_type=linux

# Format of library name prefix.
libname_spec="lib\$name"

# List of archive names.  First name is the real one, the rest are links.
# The last name is the one that the linker finds with -lNAME.
library_names_spec="\${libname}\${release}.so\$versuffix \${libname}\${release}.so\$major \$libname.so"

# The coded name of the library, if different from the real name.
soname_spec="\${libname}\${release}.so\$major"

# Commands used to build and install an old-style archive.
RANLIB="ranlib"
old_archive_cmds="\$AR \$AR_FLAGS \$oldlib\$oldobjs\$old_deplibs~\$RANLIB \$oldlib"
old_postinstall_cmds="\$RANLIB \$oldlib~chmod 644 \$oldlib"
old_postuninstall_cmds=""

# Create an old-style archive from a shared archive.
old_archive_from_new_cmds=""

# Create a temporary old-style archive to link instead of a shared archive.
old_archive_from_expsyms_cmds=""

# Commands used to build and install a shared archive.
archive_cmds="\$CC -shared -nostdlib \$predep_objects \$libobjs \$deplibs \$postdep_objects \$compiler_flags \${wl}-soname \$wl\$soname -o \$lib"
archive_expsym_cmds="\$CC -shared -nostdlib \$predep_objects \$libobjs \$deplibs \$postdep_objects \$compiler_flags \${wl}-soname \$wl\$soname \${wl}-retain-symbols-file \$wl\$export_symbols -o \$lib"
postinstall_cmds=""
postuninstall_cmds=""

# Commands to strip libraries.
old_striplib="strip --strip-debug"
striplib="strip --strip-unneeded"

# Dependencies to place before the objects being linked to create a
# shared library.
predep_objects="/usr/lib/crti.o /usr/lib/gcc-lib/i386-linux/2.95.4/crtbeginS.o"

# Dependencies to place after the objects being linked to create a
# shared library.
postdep_objects="/usr/lib/gcc-lib/i386-linux/2.95.4/crtendS.o /usr/lib/crtn.o"

# Dependencies to place before the objects being linked to create a
# shared library.
predeps=""

# Dependencies to place after the objects being linked to create a
# shared library.
postdeps="-lstdc++ -lm -lgcc -lc -lgcc"

# The library search path used internally by the compiler when linking
# a shared library.
compiler_lib_search_path="-L/usr/lib/gcc-lib/i386-linux/2.95.4"

# Method to check whether dependent libraries are shared objects.
deplibs_check_method="pass_all"

# Command to use when deplibs_check_method == file_magic.
file_magic_cmd="\$MAGIC_CMD"

# Flag that allows shared libraries with undefined symbols to be built.
allow_undefined_flag=""

# Flag that forces no undefined symbols.
no_undefined_flag=""

# Commands used to finish a libtool library installation in a directory.
finish_cmds="PATH=\\\"\\\$PATH:/sbin\\\" ldconfig -n \$libdir"

# Same as above, but a single script fragment to be evaled but not shown.
finish_eval=""

# Take the output of nm and produce a listing of raw symbols and C names.
global_symbol_pipe="sed -n -e 's/^.*[ 	]\\([ABCDGISTW][ABCDGISTW]*\\)[ 	][ 	]*\\(\\)\\([_A-Za-z][_A-Za-z0-9]*\\)\$/\\1 \\2\\3 \\3/p'"

# Transform the output of nm in a proper C declaration
global_symbol_to_cdecl="sed -n -e 's/^. .* \\(.*\\)\$/extern int \\1;/p'"

# Transform the output of nm in a C name address pair
global_symbol_to_c_name_address="sed -n -e 's/^: \\([^ ]*\\) \$/  {\\\"\\1\\\", (lt_ptr) 0},/p' -e 's/^[BCDEGRST] \\([^ ]*\\) \\([^ ]*\\)\$/  {\"\\2\", (lt_ptr) \\&\\2},/p'"

# This is the shared library runtime path variable.
runpath_var=LD_RUN_PATH

# This is the shared library path variable.
shlibpath_var=LD_LIBRARY_PATH

# Is shlibpath searched before the hard-coded library search path?
shlibpath_overrides_runpath=no

# How to hardcode a shared library path into an executable.
hardcode_action=immediate

# Whether we should hardcode library paths into libraries.
hardcode_into_libs=yes

# Flag to hardcode $libdir into a binary during linking.
# This must work even if $libdir does not exist.
hardcode_libdir_flag_spec="\${wl}--rpath \${wl}\$libdir"

# Whether we need a single -rpath flag with a separated argument.
hardcode_libdir_separator=""

# Set to yes if using DIR/libNAME.so during linking hardcodes DIR into the
# resulting binary.
hardcode_direct=no

# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
# resulting binary.
hardcode_minus_L=no

# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
# the resulting binary.
hardcode_shlibpath_var=

# Variables whose values should be saved in libtool wrapper scripts and
# restored at relink time.
variables_saved_for_relink="PATH LD_LIBRARY_PATH LD_RUN_PATH GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"

# Whether libtool must link a program against all its dependency libraries.
link_all_deplibs=unknown

# Compile-time system search path for libraries
sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"

# Run-time system search path for libraries
sys_lib_dlsearch_path_spec="/lib /usr/lib"

# Fix the shell variable $srcfile for the compiler.
fix_srcfile_path=""

# Set to yes if exported symbols are required.
always_export_symbols=no

# The commands to list exported symbols.
export_symbols_cmds=""

# The commands to extract the exported symbol list from a shared archive.
extract_expsyms_cmds=""

# Symbols that should not be listed in the preloaded symbols.
exclude_expsyms=""

# Symbols that must always be exported.
include_expsyms=""

# ### END LIBTOOL TAG CONFIG: CXX

# ### BEGIN LIBTOOL TAG CONFIG: GCJ

# Libtool was configured on host alice:

# Shell to use when invoking shell scripts.
SHELL="/bin/sh"

# Whether or not to build shared libraries.
build_libtool_libs=yes

# Whether or not to build static libraries.
build_old_libs=yes

# Whether or not to add -lc for building shared libraries.
build_libtool_need_lc=yes

# Whether or not to optimize for fast installation.
fast_install=yes

# The host system.
host_alias=
host=i686-pc-linux-gnu

# An echo program that does not interpret backslashes.
echo="echo"

# The archiver.
AR="ar"
AR_FLAGS="cru"

# A C compiler.
LTCC=gcc

# A language-specific compiler.
CC="gcj"

# Is the compiler the GNU C compiler?
with_gcc=

# The linker used to build libraries.
LD=""

# Whether we need hard or soft links.
LN_S="ln -s"

# A BSD-compatible nm program.
NM="/usr/bin/nm -B"

# A symbol stripping program
STRIP=strip

# Used to examine libraries when file_magic_cmd begins "file"
MAGIC_CMD=file

# Used on cygwin: DLL creation program.
DLLTOOL="dlltool"

# Used on cygwin: object dumper.
OBJDUMP="objdump"

# Used on cygwin: assembler.
AS="as"

# The name of the directory that contains temporary libtool files.
objdir=.libs

# How to create reloadable object files.
reload_flag=" -r"
reload_cmds="\$LD\$reload_flag -o \$output\$reload_objs"

# How to pass a linker flag through the compiler.
wl="-Wl,"

# Object file suffix (normally "o").
objext="o"

# Old archive suffix (normally "a").
libext="a"

# Executable file suffix (normally "").
exeext=""

# Additional compiler flags for building library objects.
pic_flag=" -DPIC"
pic_mode=default

# What is the maximum length of a command?
max_cmd_len=49153

# Does compiler simultaneously support -c and -o options?
compiler_c_o="no"

# Must we lock files when doing compilation ?
need_locks="no"

# Do we need the lib prefix for modules?
need_lib_prefix=no

# Do we need a version for libraries?
need_version=no

# Whether dlopen is supported.
dlopen_support=unknown

# Whether dlopen of programs is supported.
dlopen_self=unknown

# Whether dlopen of statically linked programs is supported.
dlopen_self_static=unknown

# Compiler flag to prevent dynamic linking.
link_static_flag="-static"

# Compiler flag to turn off builtin functions.
no_builtin_flag=" -fno-builtin -fno-rtti -fno-exceptions"

# Compiler flag to allow reflexive dlopens.
export_dynamic_flag_spec="\${wl}--export-dynamic"

# Compiler flag to generate shared objects directly from archives.
whole_archive_flag_spec="\${wl}--whole-archive\$convenience \${wl}--no-whole-archive"

# Compiler flag to generate thread-safe objects.
thread_safe_flag_spec=""

# Library versioning type.
version_type=linux

# Format of library name prefix.
libname_spec="lib\$name"

# List of archive names.  First name is the real one, the rest are links.
# The last name is the one that the linker finds with -lNAME.
library_names_spec="\${libname}\${release}.so\$versuffix \${libname}\${release}.so\$major \$libname.so"

# The coded name of the library, if different from the real name.
soname_spec="\${libname}\${release}.so\$major"

# Commands used to build and install an old-style archive.
RANLIB="ranlib"
old_archive_cmds=""
old_postinstall_cmds="\$RANLIB \$oldlib~chmod 644 \$oldlib"
old_postuninstall_cmds=""

# Create an old-style archive from a shared archive.
old_archive_from_new_cmds=""

# Create a temporary old-style archive to link instead of a shared archive.
old_archive_from_expsyms_cmds=""

# Commands used to build and install a shared archive.
archive_cmds="\$CC -shared \$libobjs \$deplibs \$compiler_flags \${wl}-soname \$wl\$soname -o \$lib"
archive_expsym_cmds="\$CC -shared \$libobjs \$deplibs \$compiler_flags \${wl}-soname \$wl\$soname \${wl}-retain-symbols-file \$wl\$export_symbols -o \$lib"
postinstall_cmds=""
postuninstall_cmds=""

# Commands to strip libraries.
old_striplib="strip --strip-debug"
striplib="strip --strip-unneeded"

# Dependencies to place before the objects being linked to create a
# shared library.
predep_objects=""

# Dependencies to place after the objects being linked to create a
# shared library.
postdep_objects=""

# Dependencies to place before the objects being linked to create a
# shared library.
predeps=""

# Dependencies to place after the objects being linked to create a
# shared library.
postdeps=""

# The library search path used internally by the compiler when linking
# a shared library.
compiler_lib_search_path=""

# Method to check whether dependent libraries are shared objects.
deplibs_check_method="pass_all"

# Command to use when deplibs_check_method == file_magic.
file_magic_cmd="\$MAGIC_CMD"

# Flag that allows shared libraries with undefined symbols to be built.
allow_undefined_flag=""

# Flag that forces no undefined symbols.
no_undefined_flag=""

# Commands used to finish a libtool library installation in a directory.
finish_cmds="PATH=\\\"\\\$PATH:/sbin\\\" ldconfig -n \$libdir"

# Same as above, but a single script fragment to be evaled but not shown.
finish_eval=""

# Take the output of nm and produce a listing of raw symbols and C names.
global_symbol_pipe="sed -n -e 's/^.*[ 	]\\([ABCDGISTW][ABCDGISTW]*\\)[ 	][ 	]*\\(\\)\\([_A-Za-z][_A-Za-z0-9]*\\)\$/\\1 \\2\\3 \\3/p'"

# Transform the output of nm in a proper C declaration
global_symbol_to_cdecl="sed -n -e 's/^. .* \\(.*\\)\$/extern int \\1;/p'"

# Transform the output of nm in a C name address pair
global_symbol_to_c_name_address="sed -n -e 's/^: \\([^ ]*\\) \$/  {\\\"\\1\\\", (lt_ptr) 0},/p' -e 's/^[BCDEGRST] \\([^ ]*\\) \\([^ ]*\\)\$/  {\"\\2\", (lt_ptr) \\&\\2},/p'"

# This is the shared library runtime path variable.
runpath_var=LD_RUN_PATH

# This is the shared library path variable.
shlibpath_var=LD_LIBRARY_PATH

# Is shlibpath searched before the hard-coded library search path?
shlibpath_overrides_runpath=no

# How to hardcode a shared library path into an executable.
hardcode_action=immediate

# Whether we should hardcode library paths into libraries.
hardcode_into_libs=yes

# Flag to hardcode $libdir into a binary during linking.
# This must work even if $libdir does not exist.
hardcode_libdir_flag_spec="\${wl}--rpath \${wl}\$libdir"

# Whether we need a single -rpath flag with a separated argument.
hardcode_libdir_separator=""

# Set to yes if using DIR/libNAME.so during linking hardcodes DIR into the
# resulting binary.
hardcode_direct=no

# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
# resulting binary.
hardcode_minus_L=no

# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
# the resulting binary.
hardcode_shlibpath_var=unsupported

# Variables whose values should be saved in libtool wrapper scripts and
# restored at relink time.
variables_saved_for_relink="PATH LD_LIBRARY_PATH LD_RUN_PATH GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"

# Whether libtool must link a program against all its dependency libraries.
link_all_deplibs=unknown

# Compile-time system search path for libraries
sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"

# Run-time system search path for libraries
sys_lib_dlsearch_path_spec="/lib /usr/lib"

# Fix the shell variable $srcfile for the compiler.
fix_srcfile_path=""

# Set to yes if exported symbols are required.
always_export_symbols=no

# The commands to list exported symbols.
export_symbols_cmds="\$NM \$libobjs \$convenience | \$global_symbol_pipe | sed 's/.* //' | sort | uniq > \$export_symbols"

# The commands to extract the exported symbol list from a shared archive.
extract_expsyms_cmds=""

# Symbols that should not be listed in the preloaded symbols.
exclude_expsyms="_GLOBAL_OFFSET_TABLE_"

# Symbols that must always be exported.
include_expsyms=""

# ### END LIBTOOL TAG CONFIG: GCJ