--enable-shared[=PKGS]
                          build shared libraries [default=yes]
  --enable-static[=PKGS]
                          build static libraries [default=yes]
  --enable-fast-install[=PKGS]
                          optimize for fast installation [default=yes]
  --disable-libtool-lock  avoid locking (might break parallel builds)
  --enable-threadsafe           Support threadsafe operation

  --enable-cross-thread-connections   Allow connection sharing across threads

  --enable-threads-override-locks     Threads can override each others locks
  --enable-releasemode           Support libtool link to release mode
  --enable-tempstore     Use an in-ram database for temporary tables (never,no,yes,always)

  --disable-tcl       do not build TCL extension
  --enable-debug         enable debugging & verbose explain

Optional Packages:
  --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
  --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
  --with-gnu-ld           assume the C compiler uses GNU ld [default=no]
  --with-pic              try to use only PIC/non-PIC objects [default=use
                          both]
  --with-tags[=TAGS]
                          include additional configurations [automatic]
  --with-hints=FILE       Read configuration options from FILE
  --with-tcl=DIR          directory containing tcl configuration (tclConfig.sh)


Some influential environment variables:
  CC          C compiler command
  CFLAGS      C compiler flags
  LDFLAGS     linker flags, e.g. -L<lib dir> if you have libraries in a
              nonstandard directory <lib dir>
  CPPFLAGS    C/C++ preprocessor flags, e.g. -I<include dir> if you have
................................................................................






# The following RCS revision string applies to configure.in
# $Revision: 1.37 $

#########
# Programs needed
#
# Check whether --enable-shared or --disable-shared was given.
if test "${enable_shared+set}" = set; then
  enableval="$enable_shared"
................................................................................
      ;;
    esac
  fi
  rm -rf conftest*
  ;;
*-*-irix6*)
  # Find out which ABI we are using.
  echo '#line 3060 "configure"' > conftest.$ac_ext
  if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
  (eval $ac_compile) 2>&5
  ac_status=$?
  echo "$as_me:$LINENO: \$? = $ac_status" >&5
  (exit $ac_status); }; then
   if test "$lt_cv_prog_gnu_ld" = yes; then
    case `/usr/bin/file conftest.$ac_objext` in
................................................................................
done

  F77=$ac_ct_F77
fi


# Provide some information about the compiler.
echo "$as_me:4523:" \
     "checking for Fortran 77 compiler version" >&5
ac_compiler=`set X $ac_compile; echo $2`
{ (eval echo "$as_me:$LINENO: \"$ac_compiler --version </dev/null >&5\"") >&5
  (eval $ac_compiler --version </dev/null >&5) 2>&5
  ac_status=$?
  echo "$as_me:$LINENO: \$? = $ac_status" >&5
  (exit $ac_status); }
................................................................................
   # Note that $ac_compile itself does not contain backslashes and begins
   # with a dollar sign (not a hyphen), so the echo should work correctly.
   # The option is referenced via a variable to avoid confusing sed.
   lt_compile=`echo "$ac_compile" | $SED \
   -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \
   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
   -e 's:$: $lt_compiler_flag:'`
   (eval echo "\"\$as_me:5557: $lt_compile\"" >&5)
   (eval "$lt_compile" 2>conftest.err)
   ac_status=$?
   cat conftest.err >&5
   echo "$as_me:5561: \$? = $ac_status" >&5
   if (exit $ac_status) && test -s "$ac_outfile"; then
     # The compiler can only warn and ignore the option if not recognized
     # So say no if there are warnings
     if test ! -s conftest.err; then
       lt_cv_prog_compiler_rtti_exceptions=yes
     fi
   fi
................................................................................
   # Note that $ac_compile itself does not contain backslashes and begins
   # with a dollar sign (not a hyphen), so the echo should work correctly.
   # The option is referenced via a variable to avoid confusing sed.
   lt_compile=`echo "$ac_compile" | $SED \
   -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \
   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
   -e 's:$: $lt_compiler_flag:'`
   (eval echo "\"\$as_me:5790: $lt_compile\"" >&5)
   (eval "$lt_compile" 2>conftest.err)
   ac_status=$?
   cat conftest.err >&5
   echo "$as_me:5794: \$? = $ac_status" >&5
   if (exit $ac_status) && test -s "$ac_outfile"; then
     # The compiler can only warn and ignore the option if not recognized
     # So say no if there are warnings
     if test ! -s conftest.err; then
       lt_prog_compiler_pic_works=yes
     fi
   fi
................................................................................
   # (2) before a word containing "conftest.", or (3) at the end.
   # Note that $ac_compile itself does not contain backslashes and begins
   # with a dollar sign (not a hyphen), so the echo should work correctly.
   lt_compile=`echo "$ac_compile" | $SED \
   -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \
   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
   -e 's:$: $lt_compiler_flag:'`
   (eval echo "\"\$as_me:5850: $lt_compile\"" >&5)
   (eval "$lt_compile" 2>out/conftest.err)
   ac_status=$?
   cat out/conftest.err >&5
   echo "$as_me:5854: \$? = $ac_status" >&5
   if (exit $ac_status) && test -s out/conftest2.$ac_objext
   then
     # The compiler can only warn and ignore the option if not recognized
     # So say no if there are warnings
     if test ! -s out/conftest.err; then
       lt_cv_prog_compiler_c_o=yes
     fi
................................................................................
else
  	  if test "$cross_compiling" = yes; then :
  lt_cv_dlopen_self=cross
else
  lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
  lt_status=$lt_dlunknown
  cat > conftest.$ac_ext <<EOF
#line 8034 "configure"
#include "confdefs.h"

#if HAVE_DLFCN_H
#include <dlfcn.h>
#endif

#include <stdio.h>
................................................................................
else
  	  if test "$cross_compiling" = yes; then :
  lt_cv_dlopen_self_static=cross
else
  lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
  lt_status=$lt_dlunknown
  cat > conftest.$ac_ext <<EOF
#line 8132 "configure"
#include "confdefs.h"

#if HAVE_DLFCN_H
#include <dlfcn.h>
#endif

#include <stdio.h>
................................................................................
   # Note that $ac_compile itself does not contain backslashes and begins
   # with a dollar sign (not a hyphen), so the echo should work correctly.
   # The option is referenced via a variable to avoid confusing sed.
   lt_compile=`echo "$ac_compile" | $SED \
   -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \
   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
   -e 's:$: $lt_compiler_flag:'`
   (eval echo "\"\$as_me:10311: $lt_compile\"" >&5)
   (eval "$lt_compile" 2>conftest.err)
   ac_status=$?
   cat conftest.err >&5
   echo "$as_me:10315: \$? = $ac_status" >&5
   if (exit $ac_status) && test -s "$ac_outfile"; then
     # The compiler can only warn and ignore the option if not recognized
     # So say no if there are warnings
     if test ! -s conftest.err; then
       lt_prog_compiler_pic_works_CXX=yes
     fi
   fi
................................................................................
   # (2) before a word containing "conftest.", or (3) at the end.
   # Note that $ac_compile itself does not contain backslashes and begins
   # with a dollar sign (not a hyphen), so the echo should work correctly.
   lt_compile=`echo "$ac_compile" | $SED \
   -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \
   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
   -e 's:$: $lt_compiler_flag:'`
   (eval echo "\"\$as_me:10371: $lt_compile\"" >&5)
   (eval "$lt_compile" 2>out/conftest.err)
   ac_status=$?
   cat out/conftest.err >&5
   echo "$as_me:10375: \$? = $ac_status" >&5
   if (exit $ac_status) && test -s out/conftest2.$ac_objext
   then
     # The compiler can only warn and ignore the option if not recognized
     # So say no if there are warnings
     if test ! -s out/conftest.err; then
       lt_cv_prog_compiler_c_o_CXX=yes
     fi
................................................................................
else
  	  if test "$cross_compiling" = yes; then :
  lt_cv_dlopen_self=cross
else
  lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
  lt_status=$lt_dlunknown
  cat > conftest.$ac_ext <<EOF
#line 11732 "configure"
#include "confdefs.h"

#if HAVE_DLFCN_H
#include <dlfcn.h>
#endif

#include <stdio.h>
................................................................................
else
  	  if test "$cross_compiling" = yes; then :
  lt_cv_dlopen_self_static=cross
else
  lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
  lt_status=$lt_dlunknown
  cat > conftest.$ac_ext <<EOF
#line 11830 "configure"
#include "confdefs.h"

#if HAVE_DLFCN_H
#include <dlfcn.h>
#endif

#include <stdio.h>
................................................................................
   # Note that $ac_compile itself does not contain backslashes and begins
   # with a dollar sign (not a hyphen), so the echo should work correctly.
   # The option is referenced via a variable to avoid confusing sed.
   lt_compile=`echo "$ac_compile" | $SED \
   -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \
   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
   -e 's:$: $lt_compiler_flag:'`
   (eval echo "\"\$as_me:12657: $lt_compile\"" >&5)
   (eval "$lt_compile" 2>conftest.err)
   ac_status=$?
   cat conftest.err >&5
   echo "$as_me:12661: \$? = $ac_status" >&5
   if (exit $ac_status) && test -s "$ac_outfile"; then
     # The compiler can only warn and ignore the option if not recognized
     # So say no if there are warnings
     if test ! -s conftest.err; then
       lt_prog_compiler_pic_works_F77=yes
     fi
   fi
................................................................................
   # (2) before a word containing "conftest.", or (3) at the end.
   # Note that $ac_compile itself does not contain backslashes and begins
   # with a dollar sign (not a hyphen), so the echo should work correctly.
   lt_compile=`echo "$ac_compile" | $SED \
   -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \
   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
   -e 's:$: $lt_compiler_flag:'`
   (eval echo "\"\$as_me:12717: $lt_compile\"" >&5)
   (eval "$lt_compile" 2>out/conftest.err)
   ac_status=$?
   cat out/conftest.err >&5
   echo "$as_me:12721: \$? = $ac_status" >&5
   if (exit $ac_status) && test -s out/conftest2.$ac_objext
   then
     # The compiler can only warn and ignore the option if not recognized
     # So say no if there are warnings
     if test ! -s out/conftest.err; then
       lt_cv_prog_compiler_c_o_F77=yes
     fi
................................................................................
   # Note that $ac_compile itself does not contain backslashes and begins
   # with a dollar sign (not a hyphen), so the echo should work correctly.
   # The option is referenced via a variable to avoid confusing sed.
   lt_compile=`echo "$ac_compile" | $SED \
   -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \
   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
   -e 's:$: $lt_compiler_flag:'`
   (eval echo "\"\$as_me:14751: $lt_compile\"" >&5)
   (eval "$lt_compile" 2>conftest.err)
   ac_status=$?
   cat conftest.err >&5
   echo "$as_me:14755: \$? = $ac_status" >&5
   if (exit $ac_status) && test -s "$ac_outfile"; then
     # The compiler can only warn and ignore the option if not recognized
     # So say no if there are warnings
     if test ! -s conftest.err; then
       lt_cv_prog_compiler_rtti_exceptions=yes
     fi
   fi
................................................................................
   # Note that $ac_compile itself does not contain backslashes and begins
   # with a dollar sign (not a hyphen), so the echo should work correctly.
   # The option is referenced via a variable to avoid confusing sed.
   lt_compile=`echo "$ac_compile" | $SED \
   -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \
   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
   -e 's:$: $lt_compiler_flag:'`
   (eval echo "\"\$as_me:14984: $lt_compile\"" >&5)
   (eval "$lt_compile" 2>conftest.err)
   ac_status=$?
   cat conftest.err >&5
   echo "$as_me:14988: \$? = $ac_status" >&5
   if (exit $ac_status) && test -s "$ac_outfile"; then
     # The compiler can only warn and ignore the option if not recognized
     # So say no if there are warnings
     if test ! -s conftest.err; then
       lt_prog_compiler_pic_works_GCJ=yes
     fi
   fi
................................................................................
   # (2) before a word containing "conftest.", or (3) at the end.
   # Note that $ac_compile itself does not contain backslashes and begins
   # with a dollar sign (not a hyphen), so the echo should work correctly.
   lt_compile=`echo "$ac_compile" | $SED \
   -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \
   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
   -e 's:$: $lt_compiler_flag:'`
   (eval echo "\"\$as_me:15044: $lt_compile\"" >&5)
   (eval "$lt_compile" 2>out/conftest.err)
   ac_status=$?
   cat out/conftest.err >&5
   echo "$as_me:15048: \$? = $ac_status" >&5
   if (exit $ac_status) && test -s out/conftest2.$ac_objext
   then
     # The compiler can only warn and ignore the option if not recognized
     # So say no if there are warnings
     if test ! -s out/conftest.err; then
       lt_cv_prog_compiler_c_o_GCJ=yes
     fi
................................................................................
else
  	  if test "$cross_compiling" = yes; then :
  lt_cv_dlopen_self=cross
else
  lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
  lt_status=$lt_dlunknown
  cat > conftest.$ac_ext <<EOF
#line 17228 "configure"
#include "confdefs.h"

#if HAVE_DLFCN_H
#include <dlfcn.h>
#endif

#include <stdio.h>
................................................................................
else
  	  if test "$cross_compiling" = yes; then :
  lt_cv_dlopen_self_static=cross
else
  lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
  lt_status=$lt_dlunknown
  cat > conftest.$ac_ext <<EOF
#line 17326 "configure"
#include "confdefs.h"

#if HAVE_DLFCN_H
#include <dlfcn.h>
#endif

#include <stdio.h>

  --enable-shared[=PKGS]
                          build shared libraries [default=yes]
  --enable-static[=PKGS]
                          build static libraries [default=yes]
  --enable-fast-install[=PKGS]
                          optimize for fast installation [default=yes]
  --disable-libtool-lock  avoid locking (might break parallel builds)
  --enable-threadsafe     Support threadsafe operation
  --enable-cross-thread-connections
                          Allow connection sharing across threads
  --enable-threads-override-locks
                          Threads can override each others locks
  --enable-releasemode    Support libtool link to release mode
  --enable-tempstore      Use an in-ram database for temporary tables
                          (never,no,yes,always)
  --disable-tcl           do not build TCL extension
  --enable-debug          enable debugging & verbose explain

Optional Packages:
  --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
  --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
  --with-gnu-ld           assume the C compiler uses GNU ld [default=no]
  --with-pic              try to use only PIC/non-PIC objects [default=use
                          both]
  --with-tags[=TAGS]
                          include additional configurations [automatic]
  --with-hints=FILE       Read configuration options from FILE
  --with-tcl=DIR          directory containing tcl configuration
                          (tclConfig.sh)

Some influential environment variables:
  CC          C compiler command
  CFLAGS      C compiler flags
  LDFLAGS     linker flags, e.g. -L<lib dir> if you have libraries in a
              nonstandard directory <lib dir>
  CPPFLAGS    C/C++ preprocessor flags, e.g. -I<include dir> if you have
................................................................................






# The following RCS revision string applies to configure.in
# $Revision: 1.38 $

#########
# Programs needed
#
# Check whether --enable-shared or --disable-shared was given.
if test "${enable_shared+set}" = set; then
  enableval="$enable_shared"
................................................................................
      ;;
    esac
  fi
  rm -rf conftest*
  ;;
*-*-irix6*)
  # Find out which ABI we are using.
  echo '#line 3064 "configure"' > conftest.$ac_ext
  if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
  (eval $ac_compile) 2>&5
  ac_status=$?
  echo "$as_me:$LINENO: \$? = $ac_status" >&5
  (exit $ac_status); }; then
   if test "$lt_cv_prog_gnu_ld" = yes; then
    case `/usr/bin/file conftest.$ac_objext` in
................................................................................
done

  F77=$ac_ct_F77
fi


# Provide some information about the compiler.
echo "$as_me:4527:" \
     "checking for Fortran 77 compiler version" >&5
ac_compiler=`set X $ac_compile; echo $2`
{ (eval echo "$as_me:$LINENO: \"$ac_compiler --version </dev/null >&5\"") >&5
  (eval $ac_compiler --version </dev/null >&5) 2>&5
  ac_status=$?
  echo "$as_me:$LINENO: \$? = $ac_status" >&5
  (exit $ac_status); }
................................................................................
   # Note that $ac_compile itself does not contain backslashes and begins
   # with a dollar sign (not a hyphen), so the echo should work correctly.
   # The option is referenced via a variable to avoid confusing sed.
   lt_compile=`echo "$ac_compile" | $SED \
   -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \
   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
   -e 's:$: $lt_compiler_flag:'`
   (eval echo "\"\$as_me:5561: $lt_compile\"" >&5)
   (eval "$lt_compile" 2>conftest.err)
   ac_status=$?
   cat conftest.err >&5
   echo "$as_me:5565: \$? = $ac_status" >&5
   if (exit $ac_status) && test -s "$ac_outfile"; then
     # The compiler can only warn and ignore the option if not recognized
     # So say no if there are warnings
     if test ! -s conftest.err; then
       lt_cv_prog_compiler_rtti_exceptions=yes
     fi
   fi
................................................................................
   # Note that $ac_compile itself does not contain backslashes and begins
   # with a dollar sign (not a hyphen), so the echo should work correctly.
   # The option is referenced via a variable to avoid confusing sed.
   lt_compile=`echo "$ac_compile" | $SED \
   -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \
   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
   -e 's:$: $lt_compiler_flag:'`
   (eval echo "\"\$as_me:5794: $lt_compile\"" >&5)
   (eval "$lt_compile" 2>conftest.err)
   ac_status=$?
   cat conftest.err >&5
   echo "$as_me:5798: \$? = $ac_status" >&5
   if (exit $ac_status) && test -s "$ac_outfile"; then
     # The compiler can only warn and ignore the option if not recognized
     # So say no if there are warnings
     if test ! -s conftest.err; then
       lt_prog_compiler_pic_works=yes
     fi
   fi
................................................................................
   # (2) before a word containing "conftest.", or (3) at the end.
   # Note that $ac_compile itself does not contain backslashes and begins
   # with a dollar sign (not a hyphen), so the echo should work correctly.
   lt_compile=`echo "$ac_compile" | $SED \
   -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \
   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
   -e 's:$: $lt_compiler_flag:'`
   (eval echo "\"\$as_me:5854: $lt_compile\"" >&5)
   (eval "$lt_compile" 2>out/conftest.err)
   ac_status=$?
   cat out/conftest.err >&5
   echo "$as_me:5858: \$? = $ac_status" >&5
   if (exit $ac_status) && test -s out/conftest2.$ac_objext
   then
     # The compiler can only warn and ignore the option if not recognized
     # So say no if there are warnings
     if test ! -s out/conftest.err; then
       lt_cv_prog_compiler_c_o=yes
     fi
................................................................................
else
  	  if test "$cross_compiling" = yes; then :
  lt_cv_dlopen_self=cross
else
  lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
  lt_status=$lt_dlunknown
  cat > conftest.$ac_ext <<EOF
#line 8038 "configure"
#include "confdefs.h"

#if HAVE_DLFCN_H
#include <dlfcn.h>
#endif

#include <stdio.h>
................................................................................
else
  	  if test "$cross_compiling" = yes; then :
  lt_cv_dlopen_self_static=cross
else
  lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
  lt_status=$lt_dlunknown
  cat > conftest.$ac_ext <<EOF
#line 8136 "configure"
#include "confdefs.h"

#if HAVE_DLFCN_H
#include <dlfcn.h>
#endif

#include <stdio.h>
................................................................................
   # Note that $ac_compile itself does not contain backslashes and begins
   # with a dollar sign (not a hyphen), so the echo should work correctly.
   # The option is referenced via a variable to avoid confusing sed.
   lt_compile=`echo "$ac_compile" | $SED \
   -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \
   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
   -e 's:$: $lt_compiler_flag:'`
   (eval echo "\"\$as_me:10315: $lt_compile\"" >&5)
   (eval "$lt_compile" 2>conftest.err)
   ac_status=$?
   cat conftest.err >&5
   echo "$as_me:10319: \$? = $ac_status" >&5
   if (exit $ac_status) && test -s "$ac_outfile"; then
     # The compiler can only warn and ignore the option if not recognized
     # So say no if there are warnings
     if test ! -s conftest.err; then
       lt_prog_compiler_pic_works_CXX=yes
     fi
   fi
................................................................................
   # (2) before a word containing "conftest.", or (3) at the end.
   # Note that $ac_compile itself does not contain backslashes and begins
   # with a dollar sign (not a hyphen), so the echo should work correctly.
   lt_compile=`echo "$ac_compile" | $SED \
   -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \
   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
   -e 's:$: $lt_compiler_flag:'`
   (eval echo "\"\$as_me:10375: $lt_compile\"" >&5)
   (eval "$lt_compile" 2>out/conftest.err)
   ac_status=$?
   cat out/conftest.err >&5
   echo "$as_me:10379: \$? = $ac_status" >&5
   if (exit $ac_status) && test -s out/conftest2.$ac_objext
   then
     # The compiler can only warn and ignore the option if not recognized
     # So say no if there are warnings
     if test ! -s out/conftest.err; then
       lt_cv_prog_compiler_c_o_CXX=yes
     fi
................................................................................
else
  	  if test "$cross_compiling" = yes; then :
  lt_cv_dlopen_self=cross
else
  lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
  lt_status=$lt_dlunknown
  cat > conftest.$ac_ext <<EOF
#line 11736 "configure"
#include "confdefs.h"

#if HAVE_DLFCN_H
#include <dlfcn.h>
#endif

#include <stdio.h>
................................................................................
else
  	  if test "$cross_compiling" = yes; then :
  lt_cv_dlopen_self_static=cross
else
  lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
  lt_status=$lt_dlunknown
  cat > conftest.$ac_ext <<EOF
#line 11834 "configure"
#include "confdefs.h"

#if HAVE_DLFCN_H
#include <dlfcn.h>
#endif

#include <stdio.h>
................................................................................
   # Note that $ac_compile itself does not contain backslashes and begins
   # with a dollar sign (not a hyphen), so the echo should work correctly.
   # The option is referenced via a variable to avoid confusing sed.
   lt_compile=`echo "$ac_compile" | $SED \
   -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \
   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
   -e 's:$: $lt_compiler_flag:'`
   (eval echo "\"\$as_me:12661: $lt_compile\"" >&5)
   (eval "$lt_compile" 2>conftest.err)
   ac_status=$?
   cat conftest.err >&5
   echo "$as_me:12665: \$? = $ac_status" >&5
   if (exit $ac_status) && test -s "$ac_outfile"; then
     # The compiler can only warn and ignore the option if not recognized
     # So say no if there are warnings
     if test ! -s conftest.err; then
       lt_prog_compiler_pic_works_F77=yes
     fi
   fi
................................................................................
   # (2) before a word containing "conftest.", or (3) at the end.
   # Note that $ac_compile itself does not contain backslashes and begins
   # with a dollar sign (not a hyphen), so the echo should work correctly.
   lt_compile=`echo "$ac_compile" | $SED \
   -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \
   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
   -e 's:$: $lt_compiler_flag:'`
   (eval echo "\"\$as_me:12721: $lt_compile\"" >&5)
   (eval "$lt_compile" 2>out/conftest.err)
   ac_status=$?
   cat out/conftest.err >&5
   echo "$as_me:12725: \$? = $ac_status" >&5
   if (exit $ac_status) && test -s out/conftest2.$ac_objext
   then
     # The compiler can only warn and ignore the option if not recognized
     # So say no if there are warnings
     if test ! -s out/conftest.err; then
       lt_cv_prog_compiler_c_o_F77=yes
     fi
................................................................................
   # Note that $ac_compile itself does not contain backslashes and begins
   # with a dollar sign (not a hyphen), so the echo should work correctly.
   # The option is referenced via a variable to avoid confusing sed.
   lt_compile=`echo "$ac_compile" | $SED \
   -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \
   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
   -e 's:$: $lt_compiler_flag:'`
   (eval echo "\"\$as_me:14755: $lt_compile\"" >&5)
   (eval "$lt_compile" 2>conftest.err)
   ac_status=$?
   cat conftest.err >&5
   echo "$as_me:14759: \$? = $ac_status" >&5
   if (exit $ac_status) && test -s "$ac_outfile"; then
     # The compiler can only warn and ignore the option if not recognized
     # So say no if there are warnings
     if test ! -s conftest.err; then
       lt_cv_prog_compiler_rtti_exceptions=yes
     fi
   fi
................................................................................
   # Note that $ac_compile itself does not contain backslashes and begins
   # with a dollar sign (not a hyphen), so the echo should work correctly.
   # The option is referenced via a variable to avoid confusing sed.
   lt_compile=`echo "$ac_compile" | $SED \
   -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \
   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
   -e 's:$: $lt_compiler_flag:'`
   (eval echo "\"\$as_me:14988: $lt_compile\"" >&5)
   (eval "$lt_compile" 2>conftest.err)
   ac_status=$?
   cat conftest.err >&5
   echo "$as_me:14992: \$? = $ac_status" >&5
   if (exit $ac_status) && test -s "$ac_outfile"; then
     # The compiler can only warn and ignore the option if not recognized
     # So say no if there are warnings
     if test ! -s conftest.err; then
       lt_prog_compiler_pic_works_GCJ=yes
     fi
   fi
................................................................................
   # (2) before a word containing "conftest.", or (3) at the end.
   # Note that $ac_compile itself does not contain backslashes and begins
   # with a dollar sign (not a hyphen), so the echo should work correctly.
   lt_compile=`echo "$ac_compile" | $SED \
   -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \
   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
   -e 's:$: $lt_compiler_flag:'`
   (eval echo "\"\$as_me:15048: $lt_compile\"" >&5)
   (eval "$lt_compile" 2>out/conftest.err)
   ac_status=$?
   cat out/conftest.err >&5
   echo "$as_me:15052: \$? = $ac_status" >&5
   if (exit $ac_status) && test -s out/conftest2.$ac_objext
   then
     # The compiler can only warn and ignore the option if not recognized
     # So say no if there are warnings
     if test ! -s out/conftest.err; then
       lt_cv_prog_compiler_c_o_GCJ=yes
     fi
................................................................................
else
  	  if test "$cross_compiling" = yes; then :
  lt_cv_dlopen_self=cross
else
  lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
  lt_status=$lt_dlunknown
  cat > conftest.$ac_ext <<EOF
#line 17232 "configure"
#include "confdefs.h"

#if HAVE_DLFCN_H
#include <dlfcn.h>
#endif

#include <stdio.h>
................................................................................
else
  	  if test "$cross_compiling" = yes; then :
  lt_cv_dlopen_self_static=cross
else
  lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
  lt_status=$lt_dlunknown
  cat > conftest.$ac_ext <<EOF
#line 17330 "configure"
#include "confdefs.h"

#if HAVE_DLFCN_H
#include <dlfcn.h>
#endif

#include <stdio.h>

# the corresponding code.
#
AC_INIT(src/sqlite.h.in)

dnl Put the RCS revision string after AC_INIT so that it will also
dnl show in in configure.
# The following RCS revision string applies to configure.in
# $Revision: 1.23 $

#########
# Programs needed
#
AC_PROG_LIBTOOL
AC_PROG_INSTALL
AC_PROG_AWK
................................................................................
# Check to see if the --with-hints=FILE option is used.  If there is none,
# then check for a files named "$host.hints" and ../$hosts.hints where
# $host is the hostname of the build system.  If still no hints are
# found, try looking in $system.hints and ../$system.hints where
# $system is the result of uname -s.
#
AC_ARG_WITH(hints,
  [  --with-hints=FILE       Read configuration options from FILE],
  hints=$withval)
if test "$hints" = ""; then
  host=`hostname | sed 's/\..*//'`
  if test -r $host.hints; then
    hints=$host.hints
  else
     if test -r ../$host.hints; then
................................................................................
  AC_MSG_RESULT(no)
fi

##########
# Do we want to support multithreaded use of sqlite
#
AC_ARG_ENABLE(threadsafe, 
[  --enable-threadsafe           Support threadsafe operation],,enable_threadsafe=no)
AC_MSG_CHECKING([whether to support threadsafe operation])
if test "$enable_threadsafe" = "no"; then
  THREADSAFE=0
  AC_MSG_RESULT([no])
else
  THREADSAFE=1
  AC_MSG_RESULT([yes])
................................................................................

##########
# Do we want to allow a connection created in one thread to be used
# in another thread.  This does not work on many Linux systems (ex: RedHat 9)
# due to bugs in the threading implementations.  This is thus off by default.
#
AC_ARG_ENABLE(cross-thread-connections, 
[  --enable-cross-thread-connections   Allow connection sharing across threads],,enable_xthreadconnect=no)
AC_MSG_CHECKING([whether to allow connections to be shared across threads])
if test "$enable_xthreadconnect" = "no"; then
  XTHREADCONNECT=''
  AC_MSG_RESULT([no])
else
  XTHREADCONNECT='-DSQLITE_ALLOW_XTHREAD_CONNECT=1'
  AC_MSG_RESULT([yes])
................................................................................
##########
# Do we want to set threadsOverrideEachOthersLocks variable to be 1 (true) by
# default. Normally, a test at runtime is performed to determine the
# appropriate value of this variable. Use this option only if you're sure that
# threads can safely override each others locks in all runtime situations.
#
AC_ARG_ENABLE(threads-override-locks, 
[  --enable-threads-override-locks     Threads can override each others locks],,enable_threads_override_locks=no)
AC_MSG_CHECKING([whether threads can override each others locks])
if test "$enable_threads_override_locks" = "no"; then
  THREADSOVERRIDELOCKS='-1'
  AC_MSG_RESULT([no])
else
  THREADSOVERRIDELOCKS='1'
  AC_MSG_RESULT([yes])
................................................................................
fi
AC_SUBST(THREADSOVERRIDELOCKS)

##########
# Do we want to support release
#
AC_ARG_ENABLE(releasemode, 
[  --enable-releasemode           Support libtool link to release mode],,enable_releasemode=no)
AC_MSG_CHECKING([whether to support shared library linked as release mode or not])
if test "$enable_releasemode" = "no"; then
  ALLOWRELEASE=""
  AC_MSG_RESULT([no])
else
  ALLOWRELEASE="-release `cat VERSION`"
  AC_MSG_RESULT([yes])
................................................................................
fi
AC_SUBST(ALLOWRELEASE)

##########
# Do we want temporary databases in memory
#
AC_ARG_ENABLE(tempstore, 
[  --enable-tempstore     Use an in-ram database for temporary tables (never,no,yes,always)],,enable_tempstore=no)
AC_MSG_CHECKING([whether to use an in-ram database for temporary tables])
case "$enable_tempstore" in
  never ) 
    TEMP_STORE=0
    AC_MSG_RESULT([never])
  ;;
  no ) 
................................................................................
# Figure out all the parameters needed to compile against Tcl.
#
# This code is derived from the SC_PATH_TCLCONFIG and SC_LOAD_TCLCONFIG
# macros in the in the tcl.m4 file of the standard TCL distribution.
# Those macros could not be used directly since we have to make some
# minor changes to accomodate systems that do not have TCL installed.
#
AC_ARG_ENABLE(tcl, [  --disable-tcl       do not build TCL extension],
      [use_tcl=$enableval],[use_tcl=yes])
if test "${use_tcl}" = "yes" ; then
  AC_ARG_WITH(tcl, [  --with-tcl=DIR          directory containing tcl configuration (tclConfig.sh)], with_tclconfig=${withval})
  AC_MSG_CHECKING([for Tcl configuration])
  AC_CACHE_VAL(ac_cv_c_tclconfig,[
    # First check to see if --with-tcl was specified.
    if test x"${with_tclconfig}" != x ; then
      if test -f "${with_tclconfig}/tclConfig.sh" ; then
        ac_cv_c_tclconfig=`(cd ${with_tclconfig}; pwd)`
      else
................................................................................
  TARGET_HAVE_READLINE=0
fi
AC_SUBST(TARGET_READLINE_INC)
AC_SUBST(TARGET_HAVE_READLINE)

#########
# check for debug enabled
AC_ARG_ENABLE(debug, [  --enable-debug         enable debugging & verbose explain],
      [use_debug=$enableval],[use_debug=no])
if test "${use_debug}" = "yes" ; then
  TARGET_DEBUG=""
else
  TARGET_DEBUG="-DNDEBUG"
fi
AC_SUBST(TARGET_DEBUG)

# the corresponding code.
#
AC_INIT(src/sqlite.h.in)

dnl Put the RCS revision string after AC_INIT so that it will also
dnl show in in configure.
# The following RCS revision string applies to configure.in
# $Revision: 1.24 $

#########
# Programs needed
#
AC_PROG_LIBTOOL
AC_PROG_INSTALL
AC_PROG_AWK
................................................................................
# Check to see if the --with-hints=FILE option is used.  If there is none,
# then check for a files named "$host.hints" and ../$hosts.hints where
# $host is the hostname of the build system.  If still no hints are
# found, try looking in $system.hints and ../$system.hints where
# $system is the result of uname -s.
#
AC_ARG_WITH(hints,
  AC_HELP_STRING([--with-hints=FILE],[Read configuration options from FILE]),
  hints=$withval)
if test "$hints" = ""; then
  host=`hostname | sed 's/\..*//'`
  if test -r $host.hints; then
    hints=$host.hints
  else
     if test -r ../$host.hints; then
................................................................................
  AC_MSG_RESULT(no)
fi

##########
# Do we want to support multithreaded use of sqlite
#
AC_ARG_ENABLE(threadsafe, 
AC_HELP_STRING([--enable-threadsafe],[Support threadsafe operation]),,enable_threadsafe=no)
AC_MSG_CHECKING([whether to support threadsafe operation])
if test "$enable_threadsafe" = "no"; then
  THREADSAFE=0
  AC_MSG_RESULT([no])
else
  THREADSAFE=1
  AC_MSG_RESULT([yes])
................................................................................

##########
# Do we want to allow a connection created in one thread to be used
# in another thread.  This does not work on many Linux systems (ex: RedHat 9)
# due to bugs in the threading implementations.  This is thus off by default.
#
AC_ARG_ENABLE(cross-thread-connections, 
AC_HELP_STRING([--enable-cross-thread-connections],[Allow connection sharing across threads]),,enable_xthreadconnect=no)
AC_MSG_CHECKING([whether to allow connections to be shared across threads])
if test "$enable_xthreadconnect" = "no"; then
  XTHREADCONNECT=''
  AC_MSG_RESULT([no])
else
  XTHREADCONNECT='-DSQLITE_ALLOW_XTHREAD_CONNECT=1'
  AC_MSG_RESULT([yes])
................................................................................
##########
# Do we want to set threadsOverrideEachOthersLocks variable to be 1 (true) by
# default. Normally, a test at runtime is performed to determine the
# appropriate value of this variable. Use this option only if you're sure that
# threads can safely override each others locks in all runtime situations.
#
AC_ARG_ENABLE(threads-override-locks, 
AC_HELP_STRING([--enable-threads-override-locks],[Threads can override each others locks]),,enable_threads_override_locks=no)
AC_MSG_CHECKING([whether threads can override each others locks])
if test "$enable_threads_override_locks" = "no"; then
  THREADSOVERRIDELOCKS='-1'
  AC_MSG_RESULT([no])
else
  THREADSOVERRIDELOCKS='1'
  AC_MSG_RESULT([yes])
................................................................................
fi
AC_SUBST(THREADSOVERRIDELOCKS)

##########
# Do we want to support release
#
AC_ARG_ENABLE(releasemode, 
AC_HELP_STRING([--enable-releasemode],[Support libtool link to release mode]),,enable_releasemode=no)
AC_MSG_CHECKING([whether to support shared library linked as release mode or not])
if test "$enable_releasemode" = "no"; then
  ALLOWRELEASE=""
  AC_MSG_RESULT([no])
else
  ALLOWRELEASE="-release `cat VERSION`"
  AC_MSG_RESULT([yes])
................................................................................
fi
AC_SUBST(ALLOWRELEASE)

##########
# Do we want temporary databases in memory
#
AC_ARG_ENABLE(tempstore, 
AC_HELP_STRING([--enable-tempstore],[Use an in-ram database for temporary tables (never,no,yes,always)]),,enable_tempstore=no)
AC_MSG_CHECKING([whether to use an in-ram database for temporary tables])
case "$enable_tempstore" in
  never ) 
    TEMP_STORE=0
    AC_MSG_RESULT([never])
  ;;
  no ) 
................................................................................
# Figure out all the parameters needed to compile against Tcl.
#
# This code is derived from the SC_PATH_TCLCONFIG and SC_LOAD_TCLCONFIG
# macros in the in the tcl.m4 file of the standard TCL distribution.
# Those macros could not be used directly since we have to make some
# minor changes to accomodate systems that do not have TCL installed.
#
AC_ARG_ENABLE(tcl, AC_HELP_STRING([--disable-tcl],[do not build TCL extension]),
      [use_tcl=$enableval],[use_tcl=yes])
if test "${use_tcl}" = "yes" ; then
  AC_ARG_WITH(tcl, AC_HELP_STRING([--with-tcl=DIR],[directory containing tcl configuration (tclConfig.sh)]), with_tclconfig=${withval})
  AC_MSG_CHECKING([for Tcl configuration])
  AC_CACHE_VAL(ac_cv_c_tclconfig,[
    # First check to see if --with-tcl was specified.
    if test x"${with_tclconfig}" != x ; then
      if test -f "${with_tclconfig}/tclConfig.sh" ; then
        ac_cv_c_tclconfig=`(cd ${with_tclconfig}; pwd)`
      else
................................................................................
  TARGET_HAVE_READLINE=0
fi
AC_SUBST(TARGET_READLINE_INC)
AC_SUBST(TARGET_HAVE_READLINE)

#########
# check for debug enabled
AC_ARG_ENABLE(debug, AC_HELP_STRING([--enable-debug],[enable debugging & verbose explain]),
      [use_debug=$enableval],[use_debug=no])
if test "${use_debug}" = "yes" ; then
  TARGET_DEBUG=""
else
  TARGET_DEBUG="-DNDEBUG"
fi
AC_SUBST(TARGET_DEBUG)