u8 openMode;           /* SHELL_OPEN_NORMAL, _APPENDVFS, or _ZIPFILE */
  u8 doXdgOpen;          /* Invoke start/open/xdg-open in output_reset() */
  u8 nEqpLevel;          /* Depth of the EQP output graph */
  u8 eTraceType;         /* SHELL_TRACE_* value for type of trace */
  unsigned mEqpLines;    /* Mask of veritical lines in the EQP output graph */
  int outCount;          /* Revert to stdout when reaching zero */
  int cnt;               /* Number of records displayed so far */

  FILE *in;              /* Read commands from this stream */
  FILE *out;             /* Write results here */
  FILE *traceOut;        /* Output for sqlite3_trace() */
  int nErr;              /* Number of errors seen */
  int mode;              /* An output mode setting */
  int modePrior;         /* Saved mode */
  int cMode;             /* temporary output mode for the current query */
................................................................................
/*
** Reconstruct an in-memory database using the output from the "dbtotxt"
** program.  Read content from the file in p->zDbFilename.  If p->zDbFilename
** is 0, then read from standard input.
*/
static unsigned char *readHexDb(ShellState *p, int *pnData){
  unsigned char *a = 0;
  int nLine = 1;
  int n = 0;
  int pgsz = 0;
  int iOffset = 0;
  int j, k;
  int rc;
  FILE *in;
  unsigned char x[16];
  char zLine[100];
  if( p->zDbFilename ){
    in = fopen(p->zDbFilename, "r");
    if( in==0 ){
      utf8_printf(stderr, "cannot open \"%s\" for reading\n", p->zDbFilename);
      return 0;
    }

  }else{
    in = p->in;

  }
  *pnData = 0;

  if( fgets(zLine, sizeof(zLine), in)==0 ) goto readHexDb_error;
  rc = sscanf(zLine, "| size %d pagesize %d", &n, &pgsz);
  if( rc!=2 ) goto readHexDb_error;
  if( n<=0 ) goto readHexDb_error;
  a = sqlite3_malloc( n );
  if( a==0 ){
    utf8_printf(stderr, "Out of memory!\n");
................................................................................
    goto readHexDb_error;
  }
  memset(a, 0, n);
  if( pgsz<512 || pgsz>65536 || (pgsz & (pgsz-1))!=0 ){
    utf8_printf(stderr, "invalid pagesize\n");
    goto readHexDb_error;
  }
  for(nLine=2; fgets(zLine, sizeof(zLine), in)!=0; nLine++){
    rc = sscanf(zLine, "| page %d offset %d", &j, &k);
    if( rc==2 ){
      iOffset = k;
      continue;
    }
    if( strncmp(zLine, "| end ", 6)==0 ){
      break;
................................................................................
        utf8_printf(stderr, "continue exceeds file size\n");
        goto readHexDb_error;
      }
      memcpy(a+k, x, 16);
    }
  }
  *pnData = n;
  if( in!=p->in ) fclose(in);




  return a;

readHexDb_error:
  if( in!=stdin ){
    fclose(in);
  }else{
    while( fgets(zLine, sizeof(zLine), p->in)!=0 ){

      if(strncmp(zLine, "| end ", 6)==0 ) break;
    }

  }
  sqlite3_free(a);
  utf8_printf(stderr,"Error on line %d of --hexdb input\n", nLine);
  return 0;
}
#endif /* SQLITE_ENABLE_DESERIALIZE */

................................................................................

  if( c=='q' && strncmp(azArg[0], "quit", n)==0 ){
    rc = 2;
  }else

  if( c=='r' && n>=3 && strncmp(azArg[0], "read", n)==0 ){
    FILE *inSaved = p->in;

    if( nArg!=2 ){
      raw_printf(stderr, "Usage: .read FILE\n");
      rc = 1;
      goto meta_command_exit;
    }
    p->in = fopen(azArg[1], "rb");
    if( p->in==0 ){
................................................................................
      utf8_printf(stderr,"Error: cannot open \"%s\"\n", azArg[1]);
      rc = 1;
    }else{
      rc = process_input(p);
      fclose(p->in);
    }
    p->in = inSaved;

  }else

  if( c=='r' && n>=3 && strncmp(azArg[0], "restore", n)==0 ){
    const char *zSrcFile;
    const char *zDb;
    sqlite3 *pSrc;
    sqlite3_backup *pBackup;
................................................................................
  char *zSql = 0;           /* Accumulated SQL text */
  int nLine;                /* Length of current line */
  int nSql = 0;             /* Bytes of zSql[] used */
  int nAlloc = 0;           /* Allocated zSql[] space */
  int nSqlPrior = 0;        /* Bytes of zSql[] used by prior line */
  int rc;                   /* Error code */
  int errCnt = 0;           /* Number of errors seen */
  int lineno = 0;           /* Current line number */
  int startline = 0;        /* Line number for start of current input */


  while( errCnt==0 || !bail_on_error || (p->in==0 && stdin_is_interactive) ){
    fflush(p->out);
    zLine = one_input_line(p->in, zLine, nSql>0);
    if( zLine==0 ){
      /* End of input */
      if( p->in==0 && stdin_is_interactive ) printf("\n");
      break;
    }
    if( seenInterrupt ){
      if( p->in!=0 ) break;
      seenInterrupt = 0;
    }
    lineno++;
    if( nSql==0 && _all_whitespace(zLine) ){
      if( ShellHasFlag(p, SHFLG_Echo) ) printf("%s\n", zLine);
      continue;
    }
    if( zLine && (zLine[0]=='.' || zLine[0]=='#') && nSql==0 ){
      if( ShellHasFlag(p, SHFLG_Echo) ) printf("%s\n", zLine);
      if( zLine[0]=='.' ){
................................................................................
    }
    nSqlPrior = nSql;
    if( nSql==0 ){
      int i;
      for(i=0; zLine[i] && IsSpace(zLine[i]); i++){}
      assert( nAlloc>0 && zSql!=0 );
      memcpy(zSql, zLine+i, nLine+1-i);
      startline = lineno;
      nSql = nLine-i;
    }else{
      zSql[nSql++] = '\n';
      memcpy(zSql+nSql, zLine, nLine+1);
      nSql += nLine;
    }
    if( nSql && line_contains_semicolon(&zSql[nSqlPrior], nSql-nSqlPrior)
................................................................................
  ShellState *p,                  /* Configuration data */
  const char *sqliterc_override   /* Name of config file. NULL to use default */
){
  char *home_dir = NULL;
  const char *sqliterc = sqliterc_override;
  char *zBuf = 0;
  FILE *inSaved = p->in;


  if (sqliterc == NULL) {
    home_dir = find_home_dir(0);
    if( home_dir==0 ){
      raw_printf(stderr, "-- warning: cannot find home directory;"
                      " cannot read ~/.sqliterc\n");
      return;
................................................................................
    if( stdin_is_interactive ){
      utf8_printf(stderr,"-- Loading resources from %s\n",sqliterc);
    }
    process_input(p);
    fclose(p->in);
  }
  p->in = inSaved;

  sqlite3_free(zBuf);
}

/*
** Show available command line options
*/
static const char zOptions[] =

  u8 openMode;           /* SHELL_OPEN_NORMAL, _APPENDVFS, or _ZIPFILE */
  u8 doXdgOpen;          /* Invoke start/open/xdg-open in output_reset() */
  u8 nEqpLevel;          /* Depth of the EQP output graph */
  u8 eTraceType;         /* SHELL_TRACE_* value for type of trace */
  unsigned mEqpLines;    /* Mask of veritical lines in the EQP output graph */
  int outCount;          /* Revert to stdout when reaching zero */
  int cnt;               /* Number of records displayed so far */
  int lineno;            /* Line number of last line read from in */
  FILE *in;              /* Read commands from this stream */
  FILE *out;             /* Write results here */
  FILE *traceOut;        /* Output for sqlite3_trace() */
  int nErr;              /* Number of errors seen */
  int mode;              /* An output mode setting */
  int modePrior;         /* Saved mode */
  int cMode;             /* temporary output mode for the current query */
................................................................................
/*
** Reconstruct an in-memory database using the output from the "dbtotxt"
** program.  Read content from the file in p->zDbFilename.  If p->zDbFilename
** is 0, then read from standard input.
*/
static unsigned char *readHexDb(ShellState *p, int *pnData){
  unsigned char *a = 0;
  int nLine;
  int n = 0;
  int pgsz = 0;
  int iOffset = 0;
  int j, k;
  int rc;
  FILE *in;
  unsigned char x[16];
  char zLine[1000];
  if( p->zDbFilename ){
    in = fopen(p->zDbFilename, "r");
    if( in==0 ){
      utf8_printf(stderr, "cannot open \"%s\" for reading\n", p->zDbFilename);
      return 0;
    }
    nLine = 0;
  }else{
    in = p->in;
    nLine = p->lineno;
  }
  *pnData = 0;
  nLine++;
  if( fgets(zLine, sizeof(zLine), in)==0 ) goto readHexDb_error;
  rc = sscanf(zLine, "| size %d pagesize %d", &n, &pgsz);
  if( rc!=2 ) goto readHexDb_error;
  if( n<=0 ) goto readHexDb_error;
  a = sqlite3_malloc( n );
  if( a==0 ){
    utf8_printf(stderr, "Out of memory!\n");
................................................................................
    goto readHexDb_error;
  }
  memset(a, 0, n);
  if( pgsz<512 || pgsz>65536 || (pgsz & (pgsz-1))!=0 ){
    utf8_printf(stderr, "invalid pagesize\n");
    goto readHexDb_error;
  }
  for(nLine++; fgets(zLine, sizeof(zLine), in)!=0; nLine++){
    rc = sscanf(zLine, "| page %d offset %d", &j, &k);
    if( rc==2 ){
      iOffset = k;
      continue;
    }
    if( strncmp(zLine, "| end ", 6)==0 ){
      break;
................................................................................
        utf8_printf(stderr, "continue exceeds file size\n");
        goto readHexDb_error;
      }
      memcpy(a+k, x, 16);
    }
  }
  *pnData = n;
  if( in!=p->in ){
    fclose(in);
  }else{
    p->lineno = nLine;
  }
  return a;

readHexDb_error:
  if( in!=stdin ){
    fclose(in);
  }else{
    while( fgets(zLine, sizeof(zLine), p->in)!=0 ){
      nLine++;
      if(strncmp(zLine, "| end ", 6)==0 ) break;
    }
    p->lineno = nLine;
  }
  sqlite3_free(a);
  utf8_printf(stderr,"Error on line %d of --hexdb input\n", nLine);
  return 0;
}
#endif /* SQLITE_ENABLE_DESERIALIZE */

................................................................................

  if( c=='q' && strncmp(azArg[0], "quit", n)==0 ){
    rc = 2;
  }else

  if( c=='r' && n>=3 && strncmp(azArg[0], "read", n)==0 ){
    FILE *inSaved = p->in;
    int savedLineno = p->lineno;
    if( nArg!=2 ){
      raw_printf(stderr, "Usage: .read FILE\n");
      rc = 1;
      goto meta_command_exit;
    }
    p->in = fopen(azArg[1], "rb");
    if( p->in==0 ){
................................................................................
      utf8_printf(stderr,"Error: cannot open \"%s\"\n", azArg[1]);
      rc = 1;
    }else{
      rc = process_input(p);
      fclose(p->in);
    }
    p->in = inSaved;
    p->lineno = savedLineno;
  }else

  if( c=='r' && n>=3 && strncmp(azArg[0], "restore", n)==0 ){
    const char *zSrcFile;
    const char *zDb;
    sqlite3 *pSrc;
    sqlite3_backup *pBackup;
................................................................................
  char *zSql = 0;           /* Accumulated SQL text */
  int nLine;                /* Length of current line */
  int nSql = 0;             /* Bytes of zSql[] used */
  int nAlloc = 0;           /* Allocated zSql[] space */
  int nSqlPrior = 0;        /* Bytes of zSql[] used by prior line */
  int rc;                   /* Error code */
  int errCnt = 0;           /* Number of errors seen */

  int startline = 0;        /* Line number for start of current input */

  p->lineno = 0;
  while( errCnt==0 || !bail_on_error || (p->in==0 && stdin_is_interactive) ){
    fflush(p->out);
    zLine = one_input_line(p->in, zLine, nSql>0);
    if( zLine==0 ){
      /* End of input */
      if( p->in==0 && stdin_is_interactive ) printf("\n");
      break;
    }
    if( seenInterrupt ){
      if( p->in!=0 ) break;
      seenInterrupt = 0;
    }
    p->lineno++;
    if( nSql==0 && _all_whitespace(zLine) ){
      if( ShellHasFlag(p, SHFLG_Echo) ) printf("%s\n", zLine);
      continue;
    }
    if( zLine && (zLine[0]=='.' || zLine[0]=='#') && nSql==0 ){
      if( ShellHasFlag(p, SHFLG_Echo) ) printf("%s\n", zLine);
      if( zLine[0]=='.' ){
................................................................................
    }
    nSqlPrior = nSql;
    if( nSql==0 ){
      int i;
      for(i=0; zLine[i] && IsSpace(zLine[i]); i++){}
      assert( nAlloc>0 && zSql!=0 );
      memcpy(zSql, zLine+i, nLine+1-i);
      startline = p->lineno;
      nSql = nLine-i;
    }else{
      zSql[nSql++] = '\n';
      memcpy(zSql+nSql, zLine, nLine+1);
      nSql += nLine;
    }
    if( nSql && line_contains_semicolon(&zSql[nSqlPrior], nSql-nSqlPrior)
................................................................................
  ShellState *p,                  /* Configuration data */
  const char *sqliterc_override   /* Name of config file. NULL to use default */
){
  char *home_dir = NULL;
  const char *sqliterc = sqliterc_override;
  char *zBuf = 0;
  FILE *inSaved = p->in;
  int savedLineno = p->lineno;

  if (sqliterc == NULL) {
    home_dir = find_home_dir(0);
    if( home_dir==0 ){
      raw_printf(stderr, "-- warning: cannot find home directory;"
                      " cannot read ~/.sqliterc\n");
      return;
................................................................................
    if( stdin_is_interactive ){
      utf8_printf(stderr,"-- Loading resources from %s\n",sqliterc);
    }
    process_input(p);
    fclose(p->in);
  }
  p->in = inSaved;
  p->lineno = savedLineno;
  sqlite3_free(zBuf);
}

/*
** Show available command line options
*/
static const char zOptions[] =