**    May you find forgiveness for yourself and forgive others.
**    May you share freely, never taking more than you give.
**
*************************************************************************
** This file contains C code routines that are called by the parser
** to handle SELECT statements in SQLite.
**
** $Id: select.c,v 1.456 2008/07/15 00:27:35 drh Exp $
*/
#include "sqliteInt.h"


/*
** Delete all the content of a Select structure but do not deallocate
** the select structure itself.
................................................................................

/*
** Given a SELECT statement, generate a Table structure that describes
** the result set of that SELECT.
*/
Table *sqlite3ResultSetOfSelect(Parse *pParse, char *zTabName, Select *pSelect){
  Table *pTab;
  int i, j;
  ExprList *pEList;
  Column *aCol, *pCol;
  sqlite3 *db = pParse->db;





  if( sqlite3SelectResolve(pParse, pSelect, 0) ){
    return 0;
  }


  while( pSelect->pPrior ) pSelect = pSelect->pPrior;
  if( prepSelectStmt(pParse, pSelect) ){
    return 0;


  }
  if( sqlite3SelectResolve(pParse, pSelect, 0) ){



    return 0;
  }
  pTab = sqlite3DbMallocZero(db, sizeof(Table) );
  if( pTab==0 ){
    return 0;
  }
  pTab->nRef = 1;
................................................................................
    ** If we get here it means the result set contains one or more "*"
    ** operators that need to be expanded.  Loop through each expression
    ** in the result set and expand them one by one.
    */
    struct ExprList_item *a = pEList->a;
    ExprList *pNew = 0;
    int flags = pParse->db->flags;
    int longNames = (flags & SQLITE_FullColNames)!=0 &&
                      (flags & SQLITE_ShortColNames)==0;

    for(k=0; k<pEList->nExpr; k++){
      Expr *pE = a[k].pExpr;
      if( pE->op!=TK_ALL &&
           (pE->op!=TK_DOT || pE->pRight==0 || pE->pRight->op!=TK_ALL) ){
        /* This particular expression does not need to be expanded.
        */
................................................................................
            if( pRight==0 ) break;
            setQuotedToken(pParse, &pRight->token, zName);
            if( longNames || pTabList->nSrc>1 ){
              Expr *pLeft = sqlite3PExpr(pParse, TK_ID, 0, 0, 0);
              pExpr = sqlite3PExpr(pParse, TK_DOT, pLeft, pRight, 0);
              if( pExpr==0 ) break;
              setQuotedToken(pParse, &pLeft->token, zTabName);

              setToken(&pExpr->span, 
                  sqlite3MPrintf(db, "%s.%s", zTabName, zName));
              pExpr->span.dyn = 1;




              pExpr->token.z = 0;
              pExpr->token.n = 0;
              pExpr->token.dyn = 0;
            }else{
              pExpr = pRight;
              pExpr->span = pExpr->token;
              pExpr->span.dyn = 0;

**    May you find forgiveness for yourself and forgive others.
**    May you share freely, never taking more than you give.
**
*************************************************************************
** This file contains C code routines that are called by the parser
** to handle SELECT statements in SQLite.
**
** $Id: select.c,v 1.457 2008/07/15 20:56:17 drh Exp $
*/
#include "sqliteInt.h"


/*
** Delete all the content of a Select structure but do not deallocate
** the select structure itself.
................................................................................

/*
** Given a SELECT statement, generate a Table structure that describes
** the result set of that SELECT.
*/
Table *sqlite3ResultSetOfSelect(Parse *pParse, char *zTabName, Select *pSelect){
  Table *pTab;
  int i, j, rc;
  ExprList *pEList;
  Column *aCol, *pCol;
  sqlite3 *db = pParse->db;
  int savedFlags;

  savedFlags = db->flags;
  db->flags &= ~SQLITE_FullColNames;
  db->flags |= SQLITE_ShortColNames;
  rc = sqlite3SelectResolve(pParse, pSelect, 0);



  if( rc==SQLITE_OK ){
    while( pSelect->pPrior ) pSelect = pSelect->pPrior;
    rc = prepSelectStmt(pParse, pSelect);

    if( rc==SQLITE_OK ){
      rc = sqlite3SelectResolve(pParse, pSelect, 0);
    }

  }
  db->flags = savedFlags;
  if( rc ){
    return 0;
  }
  pTab = sqlite3DbMallocZero(db, sizeof(Table) );
  if( pTab==0 ){
    return 0;
  }
  pTab->nRef = 1;
................................................................................
    ** If we get here it means the result set contains one or more "*"
    ** operators that need to be expanded.  Loop through each expression
    ** in the result set and expand them one by one.
    */
    struct ExprList_item *a = pEList->a;
    ExprList *pNew = 0;
    int flags = pParse->db->flags;
    int longNames = (flags & SQLITE_FullColNames)!=0
                      && (flags & SQLITE_ShortColNames)==0;

    for(k=0; k<pEList->nExpr; k++){
      Expr *pE = a[k].pExpr;
      if( pE->op!=TK_ALL &&
           (pE->op!=TK_DOT || pE->pRight==0 || pE->pRight->op!=TK_ALL) ){
        /* This particular expression does not need to be expanded.
        */
................................................................................
            if( pRight==0 ) break;
            setQuotedToken(pParse, &pRight->token, zName);
            if( longNames || pTabList->nSrc>1 ){
              Expr *pLeft = sqlite3PExpr(pParse, TK_ID, 0, 0, 0);
              pExpr = sqlite3PExpr(pParse, TK_DOT, pLeft, pRight, 0);
              if( pExpr==0 ) break;
              setQuotedToken(pParse, &pLeft->token, zTabName);
#if 1
              setToken(&pExpr->span, 
                  sqlite3MPrintf(db, "%s.%s", zTabName, zName));
              pExpr->span.dyn = 1;
#else
              pExpr->span = pRight->token;
              pExpr->span.dyn = 0;
#endif
              pExpr->token.z = 0;
              pExpr->token.n = 0;
              pExpr->token.dyn = 0;
            }else{
              pExpr = pRight;
              pExpr->span = pExpr->token;
              pExpr->span.dyn = 0;

# 2008 July 15
#
# The author disclaims copyright to this source code.  In place of
# a legal notice, here is a blessing:
#
#    May you do good and not evil.
#    May you find forgiveness for yourself and forgive others.
#    May you share freely, never taking more than you give.
#
#***********************************************************************
# This file implements regression tests for SQLite library. 
#
# The focus of this file is testing how SQLite generates the names
# of columns in a result set.
#
# $Id: colname.test,v 1.1 2008/07/15 20:56:17 drh Exp $

set testdir [file dirname $argv0]
source $testdir/tester.tcl

# Rules (applied in order):
#
# (1) If there is an AS clause, use it.
#
# (2) A non-trival expression (not a table column name) then the name is
#     a copy of the expression text.
#
# (3) If short_column_names=ON, then just the abbreviated column name without
#     the table name.
#
# (4) When short_column_names=OFF and full_column_names=OFF then
#     use case (2) for simple queries and case (5) for joins.
#
# (5) When short_column_names=OFF and full_column_names=ON then
#     use the form: TABLE.COLUMN
#


# Verify the default settings for short_column_name and full_column_name
#
do_test colname-1.1 {
  db eval {PRAGMA short_column_names}
} {1}
do_test colname-1.2 {
  db eval {PRAGMA full_column_names}
} {0}

# Tests for then short=ON and full=any
#
do_test colname-2.1 {
  db eval {
    CREATE TABLE tabc(a,b,c);
    INSERT INTO tabc VALUES(1,2,3);
    CREATE TABLE txyz(x,y,z);
    INSERT INTO txyz VALUES(4,5,6);
    CREATE TABLE tboth(a,b,c,x,y,z);
    INSERT INTO tboth VALUES(11,12,13,14,15,16);
    CREATE VIEW v1 AS SELECT tabC.a, txyZ.x, * 
      FROM tabc, txyz ORDER BY 1 LIMIT 1;
    CREATE VIEW v2 AS SELECT tabC.a, txyZ.x, tboTh.a, tbotH.x, *
      FROM tabc, txyz, tboth ORDER BY 1 LIMIT 1;
  }
  execsql2 {
    SELECT * FROM tabc;
  }
} {a 1 b 2 c 3}
do_test colname-2.2 {
  execsql2 {
    SELECT Tabc.a, tAbc.b, taBc.c, * FROM tabc
  }
} {a 1 b 2 c 3 a 1 b 2 c 3}
do_test colname-2.3 {
  execsql2 {
    SELECT +tabc.a, -tabc.b, tabc.c, * FROM tabc
  }
} {+tabc.a 1 -tabc.b -2 c 3 a 1 b 2 c 3}
do_test colname-2.4 {
  execsql2 {
    SELECT +tabc.a AS AAA, -tabc.b AS BBB, tabc.c CCC, * FROM tabc
  }
} {AAA 1 BBB -2 CCC 3 a 1 b 2 c 3}
do_test colname-2.5 {
  execsql2 {
    SELECT tabc.a, txyz.x, * FROM tabc, txyz;
  }
} {a 1 x 4 a 1 b 2 c 3 x 4 y 5 z 6}
do_test colname-2.6 {
  execsql2 {
    SELECT tabc.a, txyz.x, tabc.*, txyz.* FROM tabc, txyz;
  }
} {a 1 x 4 a 1 b 2 c 3 x 4 y 5 z 6}
do_test colname-2.7 {
  execsql2 {
    SELECT tabc.a, txyz.x, tboth.a, tboth.x, * FROM tabc, txyz, tboth;
  }
} {a 11 x 14 a 11 x 14 a 11 b 12 c 13 x 14 y 15 z 16 a 11 b 12 c 13 x 14 y 15 z 16}
do_test colname-2.8 {
  execsql2 {
    SELECT * FROM v1 ORDER BY 2;
  }
} {a 1 x 4 a:1 1 b 2 c 3 x:1 4 y 5 z 6}
do_test colname-2.9 {
  execsql2 {
    SELECT * FROM v2 ORDER BY 2;
  }
} {a 1 x 4 a:1 11 x:1 14 a:2 1 b 2 c 3 x:2 4 y 5 z 6 a:3 11 b:1 12 c:1 13 x:3 14 y:1 15 z:1 16}


# Tests for short=OFF and full=OFF
#
do_test colname-3.1 {
  db eval {
    PRAGMA short_column_names=OFF;
    PRAGMA full_column_names=OFF;
    CREATE VIEW v3 AS SELECT tabC.a, txyZ.x, *
      FROM tabc, txyz ORDER BY 1 LIMIT 1;
    CREATE VIEW v4 AS SELECT tabC.a, txyZ.x, tboTh.a, tbotH.x, * 
      FROM tabc, txyz, tboth ORDER BY 1 LIMIT 1;
  }
  execsql2 {
    SELECT * FROM tabc;
  }
} {a 1 b 2 c 3}
do_test colname-3.2 {
  execsql2 {
    SELECT Tabc.a, tAbc.b, taBc.c FROM tabc
  }
} {Tabc.a 1 tAbc.b 2 taBc.c 3}
do_test colname-3.3 {
  execsql2 {
    SELECT +tabc.a, -tabc.b, tabc.c FROM tabc
  }
} {+tabc.a 1 -tabc.b -2 tabc.c 3}
do_test colname-3.4 {
  execsql2 {
    SELECT +tabc.a AS AAA, -tabc.b AS BBB, tabc.c CCC FROM tabc
  }
} {AAA 1 BBB -2 CCC 3}
do_test colname-3.5 {
  execsql2 {
    SELECT Tabc.a, Txyz.x, * FROM tabc, txyz;
  }
} {Tabc.a 1 Txyz.x 4 a 1 b 2 c 3 x 4 y 5 z 6}
do_test colname-3.6 {
  execsql2 {
    SELECT tabc.*, txyz.* FROM tabc, txyz;
  }
} {a 1 b 2 c 3 x 4 y 5 z 6}
do_test colname-3.7 {
  execsql2 {
    SELECT * FROM tabc, txyz, tboth;
  }
} {a 11 b 12 c 13 x 14 y 15 z 16 a 11 b 12 c 13 x 14 y 15 z 16}
do_test colname-3.8 {
  execsql2 {
    SELECT v1.a, * FROM v1 ORDER BY 2;
  }
} {v1.a 1 a 1 x 4 a:1 1 b 2 c 3 x:1 4 y 5 z 6}
do_test colname-3.9 {
  execsql2 {
    SELECT * FROM v2 ORDER BY 2;
  }
} {a 1 x 4 a:1 11 x:1 14 a:2 1 b 2 c 3 x:2 4 y 5 z 6 a:3 11 b:1 12 c:1 13 x:3 14 y:1 15 z:1 16}
do_test colname-3.10 {
  execsql2 {
    SELECT * FROM v3 ORDER BY 2;
  }
} {a 1 x 4 a:1 1 b 2 c 3 x:1 4 y 5 z 6}
do_test colname-3.11 {
  execsql2 {
    SELECT * FROM v4 ORDER BY 2;
  }
} {a 1 x 4 a:1 11 x:1 14 a:2 1 b 2 c 3 x:2 4 y 5 z 6 a:3 11 b:1 12 c:1 13 x:3 14 y:1 15 z:1 16}

# Test for short=OFF and full=ON
#
do_test colname-4.1 {
breakpoint
  db eval {
    PRAGMA short_column_names=OFF;
    PRAGMA full_column_names=ON;
    CREATE VIEW v5 AS SELECT tabC.a, txyZ.x, *
      FROM tabc, txyz ORDER BY 1 LIMIT 1;
    CREATE VIEW v6 AS SELECT tabC.a, txyZ.x, tboTh.a, tbotH.x, * 
      FROM tabc, txyz, tboth ORDER BY 1 LIMIT 1;
  }
  execsql2 {
    SELECT * FROM tabc;
  }
} {tabc.a 1 tabc.b 2 tabc.c 3}
do_test colname-4.2 {
  execsql2 {
    SELECT Tabc.a, tAbc.b, taBc.c FROM tabc
  }
} {tabc.a 1 tabc.b 2 tabc.c 3}
do_test colname-4.3 {
  execsql2 {
    SELECT +tabc.a, -tabc.b, tabc.c FROM tabc
  }
} {+tabc.a 1 -tabc.b -2 tabc.c 3}
do_test colname-4.4 {
  execsql2 {
    SELECT +tabc.a AS AAA, -tabc.b AS BBB, tabc.c CCC FROM tabc
  }
} {AAA 1 BBB -2 CCC 3}
do_test colname-4.5 {
  execsql2 {
    SELECT Tabc.a, Txyz.x, * FROM tabc, txyz;
  }
} {tabc.a 1 txyz.x 4 tabc.a 1 tabc.b 2 tabc.c 3 txyz.x 4 txyz.y 5 txyz.z 6}
do_test colname-4.6 {
  execsql2 {
    SELECT tabc.*, txyz.* FROM tabc, txyz;
  }
} {tabc.a 1 tabc.b 2 tabc.c 3 txyz.x 4 txyz.y 5 txyz.z 6}
do_test colname-4.7 {
  execsql2 {
    SELECT * FROM tabc, txyz, tboth;
  }
} {tabc.a 1 tabc.b 2 tabc.c 3 txyz.x 4 txyz.y 5 txyz.z 6 tboth.a 11 tboth.b 12 tboth.c 13 tboth.x 14 tboth.y 15 tboth.z 16}
do_test colname-4.8 {
  execsql2 {
    SELECT * FROM v1 ORDER BY 2;
  }
} {v1.a 1 v1.x 4 v1.a:1 1 v1.b 2 v1.c 3 v1.x:1 4 v1.y 5 v1.z 6}
do_test colname-4.9 {
  execsql2 {
    SELECT * FROM v2 ORDER BY 2;
  }
} {v2.a 1 v2.x 4 v2.a:1 11 v2.x:1 14 v2.a:2 1 v2.b 2 v2.c 3 v2.x:2 4 v2.y 5 v2.z 6 v2.a:3 11 v2.b:1 12 v2.c:1 13 v2.x:3 14 v2.y:1 15 v2.z:1 16}
do_test colname-4.10 {
  execsql2 {
    SELECT * FROM v3 ORDER BY 2;
  }
} {v3.a 1 v3.x 4 v3.a:1 1 v3.b 2 v3.c 3 v3.x:1 4 v3.y 5 v3.z 6}
do_test colname-4.11 {
  execsql2 {
    SELECT * FROM v4 ORDER BY 2;
  }
} {v4.a 1 v4.x 4 v4.a:1 11 v4.x:1 14 v4.a:2 1 v4.b 2 v4.c 3 v4.x:2 4 v4.y 5 v4.z 6 v4.a:3 11 v4.b:1 12 v4.c:1 13 v4.x:3 14 v4.y:1 15 v4.z:1 16}
do_test colname-4.12 {
breakpoint
  execsql2 {
    SELECT * FROM v5 ORDER BY 2;
  }
} {v5.a 1 v5.x 4 v5.a:1 1 v5.b 2 v5.c 3 v5.x:1 4 v5.y 5 v5.z 6}
do_test colname-4.13 {
  execsql2 {
    SELECT * FROM v6 ORDER BY 2;
  }
} {v6.a 1 v6.x 4 v6.a:1 11 v6.x:1 14 v6.a:2 1 v6.b 2 v6.c 3 v6.x:2 4 v6.y 5 v6.z 6 v6.a:3 11 v6.b:1 12 v6.c:1 13 v6.x:3 14 v6.y:1 15 v6.z:1 16}


finish_test