}

/*
** Write content into a quota_FILE.  Invoke the quota callback and block
** the write if we exceed quota.
*/
size_t sqlite3_quota_fwrite(
  void *pBuf,            /* Take content to write from here */
  size_t size,           /* Size of each element */
  size_t nmemb,          /* Number of elements */
  quota_FILE *p          /* Write to this quota_FILE objecct */
){
  sqlite3_int64 iOfst;
  sqlite3_int64 iEnd;
  sqlite3_int64 szNew;
  quotaFile *pFile;
  size_t rc;
  
  iOfst = ftell(p->f);
  iEnd = iOfst + size*nmemb;
  pFile = p->pFile;
  if( pFile && pFile->iSize<iEnd ){
    quotaGroup *pGroup = pFile->pGroup;
    quotaEnter();
    szNew = pGroup->iSize - pFile->iSize + iEnd;
................................................................................
    sqlite3_int64 iNewEnd = iOfst + size*nWritten;
    if( iNewEnd<iEnd ) iNewEnd = iEnd;
    quotaEnter();
    pFile->pGroup->iSize += iNewEnd - pFile->iSize;
    pFile->iSize = iNewEnd;
    quotaLeave();
  }
  return rc;    
}

/*
** Close an open quota_FILE stream.
*/
int sqlite3_quota_fclose(quota_FILE *p){
  int rc;
................................................................................

/*
** Tell the current location of a quota_FILE stream.
*/
long sqlite3_quota_ftell(quota_FILE *p){
  return ftell(p->f);
}








/*
** Truncate a file to szNew bytes.
*/
int sqlite3_quota_ftruncate(quota_FILE *p, sqlite3_int64 szNew){
  quotaFile *pFile = p->pFile;
  int rc;
................................................................................

/*
** Return the size of the file, as it is known to the quota subsystem.
*/
sqlite3_int64 sqlite3_quota_file_size(quota_FILE *p){
  return p->pFile ? p->pFile->iSize : -1;
}




















/*
** Remove a managed file.  Update quotas accordingly.
*/
int sqlite3_quota_remove(const char *zFilename){
  char *zFull;            /* Full pathname for zFilename */
  size_t nFull;           /* Number of bytes in zFilename */
................................................................................
  }
  zPattern = Tcl_GetString(objv[1]);
  zText = Tcl_GetString(objv[2]);
  rc = quotaStrglob(zPattern, zText);
  Tcl_SetObjResult(interp, Tcl_NewIntObj(rc));
  return TCL_OK;
}
















































/*
** This routine registers the custom TCL commands defined in this
** module.  This should be the only procedure visible from outside
** of this module.
*/
int Sqlitequota_Init(Tcl_Interp *interp){
................................................................................
    { "sqlite3_quota_ftell",         test_quota_ftell },
    { "sqlite3_quota_ftruncate",     test_quota_ftruncate },
    { "sqlite3_quota_file_size",     test_quota_file_size },
    { "sqlite3_quota_file_truesize", test_quota_file_truesize },
    { "sqlite3_quota_file_mtime",    test_quota_file_mtime },
    { "sqlite3_quota_remove",        test_quota_remove },
    { "sqlite3_quota_glob",          test_quota_glob },


  };
  int i;

  for(i=0; i<sizeof(aCmd)/sizeof(aCmd[0]); i++){
    Tcl_CreateObjCommand(interp, aCmd[i].zName, aCmd[i].xProc, 0, 0);
  }

  return TCL_OK;
}
#endif

}

/*
** Write content into a quota_FILE.  Invoke the quota callback and block
** the write if we exceed quota.
*/
size_t sqlite3_quota_fwrite(
  const void *pBuf,      /* Take content to write from here */
  size_t size,           /* Size of each element */
  size_t nmemb,          /* Number of elements */
  quota_FILE *p          /* Write to this quota_FILE objecct */
){
  sqlite3_int64 iOfst;
  sqlite3_int64 iEnd;
  sqlite3_int64 szNew;
  quotaFile *pFile;
  size_t rc;

  iOfst = ftell(p->f);
  iEnd = iOfst + size*nmemb;
  pFile = p->pFile;
  if( pFile && pFile->iSize<iEnd ){
    quotaGroup *pGroup = pFile->pGroup;
    quotaEnter();
    szNew = pGroup->iSize - pFile->iSize + iEnd;
................................................................................
    sqlite3_int64 iNewEnd = iOfst + size*nWritten;
    if( iNewEnd<iEnd ) iNewEnd = iEnd;
    quotaEnter();
    pFile->pGroup->iSize += iNewEnd - pFile->iSize;
    pFile->iSize = iNewEnd;
    quotaLeave();
  }
  return rc;
}

/*
** Close an open quota_FILE stream.
*/
int sqlite3_quota_fclose(quota_FILE *p){
  int rc;
................................................................................

/*
** Tell the current location of a quota_FILE stream.
*/
long sqlite3_quota_ftell(quota_FILE *p){
  return ftell(p->f);
}

/*
** Test the error indicator for the given file.
*/
int sqlite3_quota_ferror(quota_FILE *p){
  return ferror(p->f);
}

/*
** Truncate a file to szNew bytes.
*/
int sqlite3_quota_ftruncate(quota_FILE *p, sqlite3_int64 szNew){
  quotaFile *pFile = p->pFile;
  int rc;
................................................................................

/*
** Return the size of the file, as it is known to the quota subsystem.
*/
sqlite3_int64 sqlite3_quota_file_size(quota_FILE *p){
  return p->pFile ? p->pFile->iSize : -1;
}
 
/*
** Determine the amount of data in bytes available for reading
** in the given file.
*/
long sqlite3_quota_file_available(quota_FILE *p){
  FILE* f = p->f;
  long pos1, pos2;
  int rc;
  pos1 = ftell(f);
  if ( pos1 < 0 ) return -1;
  rc = fseek(f, 0, SEEK_END);
  if ( rc != 0 ) return -1;
  pos2 = ftell(f);
  if ( pos2 < 0 ) return -1;
  rc = fseek(f, pos1, SEEK_SET);
  if ( rc != 0 ) return -1;
  return pos2 - pos1;
}

/*
** Remove a managed file.  Update quotas accordingly.
*/
int sqlite3_quota_remove(const char *zFilename){
  char *zFull;            /* Full pathname for zFilename */
  size_t nFull;           /* Number of bytes in zFilename */
................................................................................
  }
  zPattern = Tcl_GetString(objv[1]);
  zText = Tcl_GetString(objv[2]);
  rc = quotaStrglob(zPattern, zText);
  Tcl_SetObjResult(interp, Tcl_NewIntObj(rc));
  return TCL_OK;
}

/*
** tclcmd: sqlite3_quota_file_available HANDLE
**
** Return the number of bytes from the current file point to the end of
** the file.
*/
static int test_quota_file_available(
  void * clientData,
  Tcl_Interp *interp,
  int objc,
  Tcl_Obj *CONST objv[]
){
  quota_FILE *p;
  sqlite3_int64 x;
  if( objc!=2 ){
    Tcl_WrongNumArgs(interp, 1, objv, "HANDLE");
    return TCL_ERROR;
  }
  p = sqlite3TestTextToPtr(Tcl_GetString(objv[1]));
  x = sqlite3_quota_file_available(p);
  Tcl_SetObjResult(interp, Tcl_NewWideIntObj(x));
  return TCL_OK;
}

/*
** tclcmd: sqlite3_quota_ferror HANDLE
**
** Return true if the file handle is in the error state.
*/
static int test_quota_ferror(
  void * clientData,
  Tcl_Interp *interp,
  int objc,
  Tcl_Obj *CONST objv[]
){
  quota_FILE *p;
  int x;
  if( objc!=2 ){
    Tcl_WrongNumArgs(interp, 1, objv, "HANDLE");
    return TCL_ERROR;
  }
  p = sqlite3TestTextToPtr(Tcl_GetString(objv[1]));
  x = sqlite3_quota_ferror(p);
  Tcl_SetObjResult(interp, Tcl_NewIntObj(x));
  return TCL_OK;
}

/*
** This routine registers the custom TCL commands defined in this
** module.  This should be the only procedure visible from outside
** of this module.
*/
int Sqlitequota_Init(Tcl_Interp *interp){
................................................................................
    { "sqlite3_quota_ftell",         test_quota_ftell },
    { "sqlite3_quota_ftruncate",     test_quota_ftruncate },
    { "sqlite3_quota_file_size",     test_quota_file_size },
    { "sqlite3_quota_file_truesize", test_quota_file_truesize },
    { "sqlite3_quota_file_mtime",    test_quota_file_mtime },
    { "sqlite3_quota_remove",        test_quota_remove },
    { "sqlite3_quota_glob",          test_quota_glob },
    { "sqlite3_quota_file_available",test_quota_file_available },
    { "sqlite3_quota_ferror",        test_quota_ferror },
  };
  int i;

  for(i=0; i<sizeof(aCmd)/sizeof(aCmd[0]); i++){
    Tcl_CreateObjCommand(interp, aCmd[i].zName, aCmd[i].xProc, 0, 0);
  }

  return TCL_OK;
}
#endif

/*
** Perform I/O against a quota_FILE object.  When doing writes, the
** quota mechanism may result in a short write, in order to prevent
** the sum of sizes of all files from going over quota.
*/
size_t sqlite3_quota_fread(void*, size_t, size_t, quota_FILE*);
size_t sqlite3_quota_fwrite(void*, size_t, size_t, quota_FILE*);

/*
** Flush all written content held in memory buffers out to disk.
** This is the equivalent of fflush() in the standard library.
**
** If the hardSync parameter is true (non-zero) then this routine
** also forces OS buffers to disk - the equivalent of fsync().
................................................................................
** Move the read/write pointer for a quota_FILE object.  Or tell the
** current location of the read/write pointer.
*/
int sqlite3_quota_fseek(quota_FILE*, long, int);
void sqlite3_quota_rewind(quota_FILE*);
long sqlite3_quota_ftell(quota_FILE*);








/*
** Truncate a file previously opened by sqlite3_quota_fopen().  Return
** zero on success and non-zero on any kind of failure.
**
** The newSize argument must be less than or equal to the current file size.
** Any attempt to "truncate" a file to a larger size results in 
** undefined behavior.
*/
int sqlite3_quota_ftrunate(quota_FILE*, sqlite3_int64 newSize);

/*
** Return the last modification time of the opened file, in seconds
** since 1970.
*/
int sqlite3_quota_file_mtime(quota_FILE*, time_t *pTime);

................................................................................
** pending writes have not yet been flushed to disk.
**
** Return -1 if the file does not exist or if the size of the file
** cannot be determined for some reason.
*/
sqlite3_int64 sqlite3_quota_file_truesize(quota_FILE*);









/*
** Delete a file from the disk, if that file is under quota management.
** Adjust quotas accordingly.
**
** If zFilename is the name of a directory that matches one of the
** quota glob patterns, then all files under quota management that
** are contained within that directory are deleted.

/*
** Perform I/O against a quota_FILE object.  When doing writes, the
** quota mechanism may result in a short write, in order to prevent
** the sum of sizes of all files from going over quota.
*/
size_t sqlite3_quota_fread(void*, size_t, size_t, quota_FILE*);
size_t sqlite3_quota_fwrite(const void*, size_t, size_t, quota_FILE*);

/*
** Flush all written content held in memory buffers out to disk.
** This is the equivalent of fflush() in the standard library.
**
** If the hardSync parameter is true (non-zero) then this routine
** also forces OS buffers to disk - the equivalent of fsync().
................................................................................
** Move the read/write pointer for a quota_FILE object.  Or tell the
** current location of the read/write pointer.
*/
int sqlite3_quota_fseek(quota_FILE*, long, int);
void sqlite3_quota_rewind(quota_FILE*);
long sqlite3_quota_ftell(quota_FILE*);

/*
** Test the error indicator for the given file.
**
** Return non-zero if the error indicator is set.
*/
int sqlite3_quota_ferror(quota_FILE*);

/*
** Truncate a file previously opened by sqlite3_quota_fopen().  Return
** zero on success and non-zero on any kind of failure.
**
** The newSize argument must be less than or equal to the current file size.
** Any attempt to "truncate" a file to a larger size results in 
** undefined behavior.
*/
int sqlite3_quota_ftruncate(quota_FILE*, sqlite3_int64 newSize);

/*
** Return the last modification time of the opened file, in seconds
** since 1970.
*/
int sqlite3_quota_file_mtime(quota_FILE*, time_t *pTime);

................................................................................
** pending writes have not yet been flushed to disk.
**
** Return -1 if the file does not exist or if the size of the file
** cannot be determined for some reason.
*/
sqlite3_int64 sqlite3_quota_file_truesize(quota_FILE*);

/*
** Determine the amount of data in bytes available for reading
** in the given file.
**
** Return -1 if the amount cannot be determined for some reason.
*/
long sqlite3_quota_file_available(quota_FILE*);

/*
** Delete a file from the disk, if that file is under quota management.
** Adjust quotas accordingly.
**
** If zFilename is the name of a directory that matches one of the
** quota glob patterns, then all files under quota management that
** are contained within that directory are deleted.

do_test quota2-2.1 {
  set ::h1 [sqlite3_quota_fopen quota2c/xyz.txt w+b]
  sqlite3_quota_fwrite $::h1 1 7000 $bigtext
} {7000}
do_test quota2-2.2 {
  set ::quota
} {}
do_test quota2-2.3 {
  sqlite3_quota_rewind $::h1



  set ::x [sqlite3_quota_fread $::h1 1001 7]
  string length $::x
} {6006}



do_test quota2-2.4 {
  string match $::x [string range $::bigtext 0 6005]
} {1}
do_test quota2-2.5 {
  sqlite3_quota_fseek $::h1 0 SEEK_END
  sqlite3_quota_ftell $::h1
} {7000}
do_test quota2-2.6 {
  sqlite3_quota_fseek $::h1 -100 SEEK_END
  sqlite3_quota_ftell $::h1
} {6900}



do_test quota2-2.7 {
  sqlite3_quota_fseek $::h1 -100 SEEK_CUR
  sqlite3_quota_ftell $::h1
} {6800}



do_test quota2-2.8 {
  sqlite3_quota_fseek $::h1 50 SEEK_CUR
  sqlite3_quota_ftell $::h1
} {6850}



do_test quota2-2.9 {
  sqlite3_quota_fseek $::h1 50 SEEK_SET
  sqlite3_quota_ftell $::h1
} {50}



do_test quota2-2.10 {
  sqlite3_quota_rewind $::h1
  sqlite3_quota_ftell $::h1
} {0}






do_test quota2-2.11 {
  standard_path [sqlite3_quota_dump]
} {{*/quota2b/* 5000 0} {*/quota2a/* 4000 0}}
do_test quota2-2.12 {
  sqlite3_quota_fclose $::h1
  standard_path [sqlite3_quota_dump]
} {{*/quota2b/* 5000 0} {*/quota2a/* 4000 0}}

do_test quota2-2.1 {
  set ::h1 [sqlite3_quota_fopen quota2c/xyz.txt w+b]
  sqlite3_quota_fwrite $::h1 1 7000 $bigtext
} {7000}
do_test quota2-2.2 {
  set ::quota
} {}
do_test quota2-2.3.1 {
  sqlite3_quota_rewind $::h1
  sqlite3_quota_file_available $::h1
} {7000}
do_test quota2-2.3.2 {
  set ::x [sqlite3_quota_fread $::h1 1001 7]
  string length $::x
} {6006}
do_test quota2-2.3.3 {
  sqlite3_quota_file_available $::h1
} {0}
do_test quota2-2.4 {
  string match $::x [string range $::bigtext 0 6005]
} {1}
do_test quota2-2.5 {
  sqlite3_quota_fseek $::h1 0 SEEK_END
  sqlite3_quota_ftell $::h1
} {7000}
do_test quota2-2.6 {
  sqlite3_quota_fseek $::h1 -100 SEEK_END
  sqlite3_quota_ftell $::h1
} {6900}
do_test quota2-2.6.1 {
  sqlite3_quota_file_available $::h1
} {100}
do_test quota2-2.7 {
  sqlite3_quota_fseek $::h1 -100 SEEK_CUR
  sqlite3_quota_ftell $::h1
} {6800}
do_test quota2-2.7.1 {
  sqlite3_quota_file_available $::h1
} {200}
do_test quota2-2.8 {
  sqlite3_quota_fseek $::h1 50 SEEK_CUR
  sqlite3_quota_ftell $::h1
} {6850}
do_test quota2-2.8.1 {
  sqlite3_quota_file_available $::h1
} {150}
do_test quota2-2.9 {
  sqlite3_quota_fseek $::h1 50 SEEK_SET
  sqlite3_quota_ftell $::h1
} {50}
do_test quota2-2.9.1 {
  sqlite3_quota_file_available $::h1
} {6950}
do_test quota2-2.10 {
  sqlite3_quota_rewind $::h1
  sqlite3_quota_ftell $::h1
} {0}
do_test quota2-2.10.1 {
  sqlite3_quota_file_available $::h1
} {7000}
do_test quota2-2.10.2 {
  sqlite3_quota_ferror $::h1
} {0}
do_test quota2-2.11 {
  standard_path [sqlite3_quota_dump]
} {{*/quota2b/* 5000 0} {*/quota2a/* 4000 0}}
do_test quota2-2.12 {
  sqlite3_quota_fclose $::h1
  standard_path [sqlite3_quota_dump]
} {{*/quota2b/* 5000 0} {*/quota2a/* 4000 0}}