** The pager is used to access a database disk file.  It implements
** atomic commit and rollback through the use of a journal file that
** is separate from the database file.  The pager also implements file
** locking to prevent two processes from writing the same database
** file simultaneously, or one process from reading the database while
** another is writing.
**
** @(#) $Id: pager.c,v 1.44 2002/03/06 22:01:36 drh Exp $
*/
#include "sqliteInt.h"
#include "pager.h"
#include "os.h"
#include <assert.h>
#include <string.h>

................................................................................
  u8 ckptOpen;                /* True if the checkpoint journal is open */
  u8 noSync;                  /* Do not sync the journal if true */
  u8 state;                   /* SQLITE_UNLOCK, _READLOCK or _WRITELOCK */
  u8 errMask;                 /* One of several kinds of errors */
  u8 tempFile;                /* zFilename is a temporary file */
  u8 readOnly;                /* True for a read-only database */
  u8 needSync;                /* True if an fsync() is needed on the journal */

  u8 *aInJournal;             /* One bit for each page in the database file */
  u8 *aInCkpt;                /* One bit for each page in the database */
  PgHdr *pFirst, *pLast;      /* List of free pages */
  PgHdr *pAll;                /* List of all pages */
  PgHdr *aHash[N_PG_HASH];    /* Hash table to map page number of PgHdr */
};

................................................................................
** calls to sqliteOsSync().  The pager runs much faster with noSync on,
** but if the operating system crashes or there is an abrupt power 
** failure, the database file might be left in an inconsistent and
** unrepairable state.  
*/
void sqlitepager_set_cachesize(Pager *pPager, int mxPage){
  if( mxPage>=0 ){
    pPager->noSync = 0;
  }else{
    pPager->noSync = 1;
    mxPage = -mxPage;
  }
  if( mxPage>10 ){
    pPager->mxPage = mxPage;
  }
................................................................................
  pPager->nPage = 0;
  pPager->mxPage = mxPage>5 ? mxPage : 10;
  pPager->state = SQLITE_UNLOCK;
  pPager->errMask = 0;
  pPager->tempFile = tempFile;
  pPager->readOnly = readOnly;
  pPager->needSync = 0;

  pPager->pFirst = 0;
  pPager->pLast = 0;
  pPager->nExtra = nExtra;
  memset(pPager->aHash, 0, sizeof(pPager->aHash));
  *ppPager = pPager;
  return SQLITE_OK;
}
................................................................................
    if( rc!=SQLITE_OK ){
      sqliteFree(pPager->aInJournal);
      pPager->aInJournal = 0;
      sqliteOsReadLock(&pPager->fd);
      return SQLITE_CANTOPEN;
    }
    pPager->journalOpen = 1;
    pPager->needSync = !pPager->noSync;

    pPager->state = SQLITE_WRITELOCK;
    sqlitepager_pagecount(pPager);
    pPager->origDbSize = pPager->dbSize;
    rc = sqliteOsWrite(&pPager->jfd, aJournalMagic, sizeof(aJournalMagic));
    if( rc==SQLITE_OK ){
      rc = sqliteOsWrite(&pPager->jfd, &pPager->dbSize, sizeof(Pgno));
    }
................................................................................
  }

  /* Mark the page as dirty.  If the page has already been written
  ** to the journal then we can return right away.
  */
  pPg->dirty = 1;
  if( pPg->inJournal && (pPg->inCkpt || pPager->ckptOpen==0) ){

    return SQLITE_OK;
  }

  /* If we get this far, it means that the page needs to be
  ** written to the transaction journal or the ckeckpoint journal
  ** or both.
  **
  ** First check to see that the transaction journal exists and
  ** create it if it does not.
  */
  assert( pPager->state!=SQLITE_UNLOCK );
  rc = sqlitepager_begin(pData);

  if( rc!=SQLITE_OK ) return rc;
  assert( pPager->state==SQLITE_WRITELOCK );
  assert( pPager->journalOpen );

  /* The transaction journal now exists and we have a write lock on the
  ** main database file.  Write the current page to the transaction 
  ** journal if it is not there already.
................................................................................
    rc = pager_errcode(pPager);
    return rc;
  }
  if( pPager->state!=SQLITE_WRITELOCK ){
    return SQLITE_ERROR;
  }
  assert( pPager->journalOpen );







  if( pPager->needSync && sqliteOsSync(&pPager->jfd)!=SQLITE_OK ){
    goto commit_abort;
  }
  for(pPg=pPager->pAll; pPg; pPg=pPg->pNextAll){
    if( pPg->dirty==0 ) continue;
    rc = sqliteOsSeek(&pPager->fd, (pPg->pgno-1)*SQLITE_PAGE_SIZE);
    if( rc!=SQLITE_OK ) goto commit_abort;

** The pager is used to access a database disk file.  It implements
** atomic commit and rollback through the use of a journal file that
** is separate from the database file.  The pager also implements file
** locking to prevent two processes from writing the same database
** file simultaneously, or one process from reading the database while
** another is writing.
**
** @(#) $Id: pager.c,v 1.45 2002/04/18 01:56:58 drh Exp $
*/
#include "sqliteInt.h"
#include "pager.h"
#include "os.h"
#include <assert.h>
#include <string.h>

................................................................................
  u8 ckptOpen;                /* True if the checkpoint journal is open */
  u8 noSync;                  /* Do not sync the journal if true */
  u8 state;                   /* SQLITE_UNLOCK, _READLOCK or _WRITELOCK */
  u8 errMask;                 /* One of several kinds of errors */
  u8 tempFile;                /* zFilename is a temporary file */
  u8 readOnly;                /* True for a read-only database */
  u8 needSync;                /* True if an fsync() is needed on the journal */
  u8 dirtyFile;               /* True if database file has changed in any way */
  u8 *aInJournal;             /* One bit for each page in the database file */
  u8 *aInCkpt;                /* One bit for each page in the database */
  PgHdr *pFirst, *pLast;      /* List of free pages */
  PgHdr *pAll;                /* List of all pages */
  PgHdr *aHash[N_PG_HASH];    /* Hash table to map page number of PgHdr */
};

................................................................................
** calls to sqliteOsSync().  The pager runs much faster with noSync on,
** but if the operating system crashes or there is an abrupt power 
** failure, the database file might be left in an inconsistent and
** unrepairable state.  
*/
void sqlitepager_set_cachesize(Pager *pPager, int mxPage){
  if( mxPage>=0 ){
    pPager->noSync = pPager->tempFile;
  }else{
    pPager->noSync = 1;
    mxPage = -mxPage;
  }
  if( mxPage>10 ){
    pPager->mxPage = mxPage;
  }
................................................................................
  pPager->nPage = 0;
  pPager->mxPage = mxPage>5 ? mxPage : 10;
  pPager->state = SQLITE_UNLOCK;
  pPager->errMask = 0;
  pPager->tempFile = tempFile;
  pPager->readOnly = readOnly;
  pPager->needSync = 0;
  pPager->noSync = pPager->tempFile;
  pPager->pFirst = 0;
  pPager->pLast = 0;
  pPager->nExtra = nExtra;
  memset(pPager->aHash, 0, sizeof(pPager->aHash));
  *ppPager = pPager;
  return SQLITE_OK;
}
................................................................................
    if( rc!=SQLITE_OK ){
      sqliteFree(pPager->aInJournal);
      pPager->aInJournal = 0;
      sqliteOsReadLock(&pPager->fd);
      return SQLITE_CANTOPEN;
    }
    pPager->journalOpen = 1;
    pPager->needSync = 0;
    pPager->dirtyFile = 0;
    pPager->state = SQLITE_WRITELOCK;
    sqlitepager_pagecount(pPager);
    pPager->origDbSize = pPager->dbSize;
    rc = sqliteOsWrite(&pPager->jfd, aJournalMagic, sizeof(aJournalMagic));
    if( rc==SQLITE_OK ){
      rc = sqliteOsWrite(&pPager->jfd, &pPager->dbSize, sizeof(Pgno));
    }
................................................................................
  }

  /* Mark the page as dirty.  If the page has already been written
  ** to the journal then we can return right away.
  */
  pPg->dirty = 1;
  if( pPg->inJournal && (pPg->inCkpt || pPager->ckptOpen==0) ){
    pPager->dirtyFile = 1;
    return SQLITE_OK;
  }

  /* If we get this far, it means that the page needs to be
  ** written to the transaction journal or the ckeckpoint journal
  ** or both.
  **
  ** First check to see that the transaction journal exists and
  ** create it if it does not.
  */
  assert( pPager->state!=SQLITE_UNLOCK );
  rc = sqlitepager_begin(pData);
  pPager->dirtyFile = 1;
  if( rc!=SQLITE_OK ) return rc;
  assert( pPager->state==SQLITE_WRITELOCK );
  assert( pPager->journalOpen );

  /* The transaction journal now exists and we have a write lock on the
  ** main database file.  Write the current page to the transaction 
  ** journal if it is not there already.
................................................................................
    rc = pager_errcode(pPager);
    return rc;
  }
  if( pPager->state!=SQLITE_WRITELOCK ){
    return SQLITE_ERROR;
  }
  assert( pPager->journalOpen );
  if( pPager->dirtyFile==0 ){
    /* Exit early (without doing the time-consuming sqliteOsSync() calls)
    ** if there have been no changes to the database file. */
    rc = pager_unwritelock(pPager);
    pPager->dbSize = -1;
    return rc;
  }
  if( pPager->needSync && sqliteOsSync(&pPager->jfd)!=SQLITE_OK ){
    goto commit_abort;
  }
  for(pPg=pPager->pAll; pPg; pPg=pPg->pNextAll){
    if( pPg->dirty==0 ) continue;
    rc = sqliteOsSeek(&pPager->fd, (pPg->pgno-1)*SQLITE_PAGE_SIZE);
    if( rc!=SQLITE_OK ) goto commit_abort;