*/
#define ORIGVFS(p) ((sqlite3_vfs*)((p)->pAppData))

/* An open file */
struct MemFile {
  sqlite3_file base;              /* IO methods */
  sqlite3_int64 sz;               /* Size of the file */

  sqlite3_int64 szMax;            /* Space allocated to aData */
  unsigned char *aData;           /* content of the file */
  int nMmap;                      /* Number of memory mapped pages */
  unsigned mFlags;                /* Flags */
  int eLock;                      /* Most recent lock against this file */
};






/*
** Methods for MemFile
*/
static int memdbClose(sqlite3_file*);
static int memdbRead(sqlite3_file*, void*, int iAmt, sqlite3_int64 iOfst);
static int memdbWrite(sqlite3_file*,const void*,int iAmt, sqlite3_int64 iOfst);
................................................................................
** Try to enlarge the memory allocation to hold at least sz bytes
*/
static int memdbEnlarge(MemFile *p, sqlite3_int64 newSz){
  unsigned char *pNew;
  if( (p->mFlags & SQLITE_DESERIALIZE_RESIZEABLE)==0 || p->nMmap>0 ){
    return SQLITE_FULL;
  }





  pNew = sqlite3_realloc64(p->aData, newSz);
  if( pNew==0 ) return SQLITE_NOMEM;
  p->aData = pNew;
  p->szMax = newSz;
  return SQLITE_OK;
}

/*
** Write data to an memdb-file.
*/
static int memdbWrite(
  sqlite3_file *pFile,
  const void *z,
  int iAmt,
  sqlite_int64 iOfst
){
  MemFile *p = (MemFile *)pFile;

  if( iOfst+iAmt>p->sz ){
    int rc;
    if( iOfst+iAmt>p->szMax
     && (rc = memdbEnlarge(p, (iOfst+iAmt)*2))!=SQLITE_OK
    ){
      return rc;
    }
    if( iOfst>p->sz ) memset(p->aData+p->sz, 0, iOfst-p->sz);
    p->sz = iOfst+iAmt;
  }
  memcpy(p->aData+iOfst, z, iAmt);
................................................................................
static int memdbFileControl(sqlite3_file *pFile, int op, void *pArg){
  MemFile *p = (MemFile *)pFile;
  int rc = SQLITE_NOTFOUND;
  if( op==SQLITE_FCNTL_VFSNAME ){
    *(char**)pArg = sqlite3_mprintf("memdb(%p,%lld)", p->aData, p->sz);
    rc = SQLITE_OK;
  }













  return rc;
}

#if 0  /* Not used because of SQLITE_IOCAP_POWERSAFE_OVERWRITE */
/*
** Return the sector-size in bytes for an memdb-file.
*/
................................................................................
    return ORIGVFS(pVfs)->xOpen(ORIGVFS(pVfs), zName, pFile, flags, pOutFlags);
  }
  memset(p, 0, sizeof(*p));
  p->mFlags = SQLITE_DESERIALIZE_RESIZEABLE | SQLITE_DESERIALIZE_FREEONCLOSE;
  assert( pOutFlags!=0 );  /* True because flags==SQLITE_OPEN_MAIN_DB */
  *pOutFlags = flags | SQLITE_OPEN_MEMORY;
  p->base.pMethods = &memdb_io_methods;

  return SQLITE_OK;
}

#if 0 /* Only used to delete rollback journals, master journals, and WAL
      ** files, none of which exist in memdb.  So this routine is never used */
/*
** Delete the file located at zPath. If the dirSync argument is true,
................................................................................
  }
  p = memdbFromDbSchema(db, zSchema);
  if( p==0 ){
    rc = SQLITE_ERROR;
  }else{
    p->aData = pData;
    p->sz = szDb;

    p->szMax = szBuf;



    p->mFlags = mFlags;
    rc = SQLITE_OK;
  }

end_deserialize:
  sqlite3_finalize(pStmt);
  sqlite3_mutex_leave(db->mutex);

*/
#define ORIGVFS(p) ((sqlite3_vfs*)((p)->pAppData))

/* An open file */
struct MemFile {
  sqlite3_file base;              /* IO methods */
  sqlite3_int64 sz;               /* Size of the file */
  sqlite3_int64 szAlloc;          /* Space allocated to aData */
  sqlite3_int64 szMax;            /* Maximum allowed size of the file */
  unsigned char *aData;           /* content of the file */
  int nMmap;                      /* Number of memory mapped pages */
  unsigned mFlags;                /* Flags */
  int eLock;                      /* Most recent lock against this file */
};

/* The default maximum size of an in-memory database */
#ifndef SQLITE_MEMDB_DEFAULT_MAXSIZE
# define SQLITE_MEMDB_DEFAULT_MAXSIZE 1073741824
#endif

/*
** Methods for MemFile
*/
static int memdbClose(sqlite3_file*);
static int memdbRead(sqlite3_file*, void*, int iAmt, sqlite3_int64 iOfst);
static int memdbWrite(sqlite3_file*,const void*,int iAmt, sqlite3_int64 iOfst);
................................................................................
** Try to enlarge the memory allocation to hold at least sz bytes
*/
static int memdbEnlarge(MemFile *p, sqlite3_int64 newSz){
  unsigned char *pNew;
  if( (p->mFlags & SQLITE_DESERIALIZE_RESIZEABLE)==0 || p->nMmap>0 ){
    return SQLITE_FULL;
  }
  if( newSz>p->szMax ){
    return SQLITE_FULL;
  }
  newSz *= 2;
  if( newSz>p->szMax ) newSz = p->szMax;
  pNew = sqlite3_realloc64(p->aData, newSz);
  if( pNew==0 ) return SQLITE_NOMEM;
  p->aData = pNew;
  p->szAlloc = newSz;
  return SQLITE_OK;
}

/*
** Write data to an memdb-file.
*/
static int memdbWrite(
  sqlite3_file *pFile,
  const void *z,
  int iAmt,
  sqlite_int64 iOfst
){
  MemFile *p = (MemFile *)pFile;
  if( p->mFlags & SQLITE_DESERIALIZE_READONLY ) return SQLITE_READONLY;
  if( iOfst+iAmt>p->sz ){
    int rc;
    if( iOfst+iAmt>p->szAlloc
     && (rc = memdbEnlarge(p, iOfst+iAmt))!=SQLITE_OK
    ){
      return rc;
    }
    if( iOfst>p->sz ) memset(p->aData+p->sz, 0, iOfst-p->sz);
    p->sz = iOfst+iAmt;
  }
  memcpy(p->aData+iOfst, z, iAmt);
................................................................................
static int memdbFileControl(sqlite3_file *pFile, int op, void *pArg){
  MemFile *p = (MemFile *)pFile;
  int rc = SQLITE_NOTFOUND;
  if( op==SQLITE_FCNTL_VFSNAME ){
    *(char**)pArg = sqlite3_mprintf("memdb(%p,%lld)", p->aData, p->sz);
    rc = SQLITE_OK;
  }
  if( op==SQLITE_FCNTL_SIZE_LIMIT ){
    sqlite3_int64 iLimit = *(sqlite3_int64*)pArg;
    if( iLimit<p->sz ){
      if( iLimit<0 ){
        iLimit = p->szMax;
      }else{
        iLimit = p->sz;
      }
    }
    p->szMax = iLimit;
    *(sqlite3_int64*)pArg = iLimit;
    rc = SQLITE_OK;
  }
  return rc;
}

#if 0  /* Not used because of SQLITE_IOCAP_POWERSAFE_OVERWRITE */
/*
** Return the sector-size in bytes for an memdb-file.
*/
................................................................................
    return ORIGVFS(pVfs)->xOpen(ORIGVFS(pVfs), zName, pFile, flags, pOutFlags);
  }
  memset(p, 0, sizeof(*p));
  p->mFlags = SQLITE_DESERIALIZE_RESIZEABLE | SQLITE_DESERIALIZE_FREEONCLOSE;
  assert( pOutFlags!=0 );  /* True because flags==SQLITE_OPEN_MAIN_DB */
  *pOutFlags = flags | SQLITE_OPEN_MEMORY;
  p->base.pMethods = &memdb_io_methods;
  p->szMax = SQLITE_MEMDB_DEFAULT_MAXSIZE;
  return SQLITE_OK;
}

#if 0 /* Only used to delete rollback journals, master journals, and WAL
      ** files, none of which exist in memdb.  So this routine is never used */
/*
** Delete the file located at zPath. If the dirSync argument is true,
................................................................................
  }
  p = memdbFromDbSchema(db, zSchema);
  if( p==0 ){
    rc = SQLITE_ERROR;
  }else{
    p->aData = pData;
    p->sz = szDb;
    p->szAlloc = szBuf;
    p->szMax = szBuf;
    if( p->szMax<SQLITE_MEMDB_DEFAULT_MAXSIZE ){
      p->szMax = SQLITE_MEMDB_DEFAULT_MAXSIZE;
    }
    p->mFlags = mFlags;
    rc = SQLITE_OK;
  }

end_deserialize:
  sqlite3_finalize(pStmt);
  sqlite3_mutex_leave(db->mutex);

  int modePrior;         /* Saved mode */
  int cMode;             /* temporary output mode for the current query */
  int normalMode;        /* Output mode before ".explain on" */
  int writableSchema;    /* True if PRAGMA writable_schema=ON */
  int showHeader;        /* True to show column names in List or Column mode */
  int nCheck;            /* Number of ".check" commands run */
  unsigned shellFlgs;    /* Various flags */

  char *zDestTable;      /* Name of destination table when MODE_Insert */
  char *zTempFile;       /* Temporary file that might need deleting */
  char zTestcase[30];    /* Name of current test case */
  char colSeparator[20]; /* Column separator character for several modes */
  char rowSeparator[20]; /* Row separator character for MODE_Ascii */
  char colSepPrior[20];  /* Saved column separator */
  char rowSepPrior[20];  /* Saved row separator */
................................................................................
  "       -x    Open in a spreadsheet",
  ".open ?OPTIONS? ?FILE?   Close existing database and reopen FILE",
  "     Options:",
  "        --append        Use appendvfs to append database to the end of FILE",
#ifdef SQLITE_ENABLE_DESERIALIZE
  "        --deserialize   Load into memory useing sqlite3_deserialize()",
  "        --hexdb         Load the output of \"dbtotxt\" as an in-memory database",

#endif
  "        --new           Initialize FILE to an empty database",
  "        --readonly      Open FILE readonly",
  "        --zip           FILE is a ZIP archive",
  ".output ?FILE?           Send output to FILE or stdout if FILE is omitted",
  "     If FILE begins with '|' then open it as a pipe.",
  ".print STRING...         Print literal STRING",
................................................................................
      }
      rc = sqlite3_deserialize(p->db, "main", aData, nData, nData,
                   SQLITE_DESERIALIZE_RESIZEABLE |
                   SQLITE_DESERIALIZE_FREEONCLOSE);
      if( rc ){
        utf8_printf(stderr, "Error: sqlite3_deserialize() returns %d\n", rc);
      }



    }
#endif
  }
}

/*
** Attempt to close the databaes connection.  Report errors.
................................................................................
    session_close_all(p);
    close_db(p->db);
    p->db = 0;
    p->zDbFilename = 0;
    sqlite3_free(p->zFreeOnClose);
    p->zFreeOnClose = 0;
    p->openMode = SHELL_OPEN_UNSPEC;

    /* Check for command-line arguments */
    for(iName=1; iName<nArg && azArg[iName][0]=='-'; iName++){
      const char *z = azArg[iName];
      if( optionMatch(z,"new") ){
        newFlag = 1;
#ifdef SQLITE_HAVE_ZLIB
      }else if( optionMatch(z, "zip") ){
................................................................................
      }else if( optionMatch(z, "readonly") ){
        p->openMode = SHELL_OPEN_READONLY;
#ifdef SQLITE_ENABLE_DESERIALIZE
      }else if( optionMatch(z, "deserialize") ){
        p->openMode = SHELL_OPEN_DESERIALIZE;
      }else if( optionMatch(z, "hexdb") ){
        p->openMode = SHELL_OPEN_HEXDB;


#endif /* SQLITE_ENABLE_DESERIALIZE */
      }else if( z[0]=='-' ){
        utf8_printf(stderr, "unknown option: %s\n", z);
        rc = 1;
        goto meta_command_exit;
      }
    }
................................................................................
  "   -append              append the database to the end of the file\n"
  "   -ascii               set output mode to 'ascii'\n"
  "   -bail                stop after hitting an error\n"
  "   -batch               force batch I/O\n"
  "   -column              set output mode to 'column'\n"
  "   -cmd COMMAND         run \"COMMAND\" before reading stdin\n"
  "   -csv                 set output mode to 'csv'\n"



  "   -echo                print commands before execution\n"
  "   -init FILENAME       read/process named file\n"
  "   -[no]header          turn headers on or off\n"
#if defined(SQLITE_ENABLE_MEMSYS3) || defined(SQLITE_ENABLE_MEMSYS5)
  "   -heap SIZE           Size of heap for memsys3 or memsys5\n"
#endif
  "   -help                show this message\n"
  "   -html                set output mode to HTML\n"
  "   -interactive         force interactive I/O\n"
  "   -line                set output mode to 'line'\n"
  "   -list                set output mode to 'list'\n"
  "   -lookaside SIZE N    use N entries of SZ bytes for lookaside memory\n"



  "   -mmap N              default mmap size set to N\n"
#ifdef SQLITE_ENABLE_MULTIPLEX
  "   -multiplex           enable the multiplexor VFS\n"
#endif
  "   -newline SEP         set output row separator. Default: '\\n'\n"
  "   -nullvalue TEXT      set text string for NULL values. Default ''\n"
  "   -pagecache SIZE N    use N slots of SZ bytes each for page cache memory\n"
................................................................................
      data.openMode = SHELL_OPEN_ZIPFILE;
#endif
    }else if( strcmp(z,"-append")==0 ){
      data.openMode = SHELL_OPEN_APPENDVFS;
#ifdef SQLITE_ENABLE_DESERIALIZE
    }else if( strcmp(z,"-deserialize")==0 ){
      data.openMode = SHELL_OPEN_DESERIALIZE;


#endif
    }else if( strcmp(z,"-readonly")==0 ){
      data.openMode = SHELL_OPEN_READONLY;
#if !defined(SQLITE_OMIT_VIRTUALTABLE) && defined(SQLITE_HAVE_ZLIB)
    }else if( strncmp(z, "-A",2)==0 ){
      /* All remaining command-line arguments are passed to the ".archive"
      ** command, so ignore them */
................................................................................
      data.openMode = SHELL_OPEN_ZIPFILE;
#endif
    }else if( strcmp(z,"-append")==0 ){
      data.openMode = SHELL_OPEN_APPENDVFS;
#ifdef SQLITE_ENABLE_DESERIALIZE
    }else if( strcmp(z,"-deserialize")==0 ){
      data.openMode = SHELL_OPEN_DESERIALIZE;


#endif
    }else if( strcmp(z,"-readonly")==0 ){
      data.openMode = SHELL_OPEN_READONLY;
    }else if( strcmp(z,"-ascii")==0 ){
      data.mode = MODE_Ascii;
      sqlite3_snprintf(sizeof(data.colSeparator), data.colSeparator,
                       SEP_Unit);

  int modePrior;         /* Saved mode */
  int cMode;             /* temporary output mode for the current query */
  int normalMode;        /* Output mode before ".explain on" */
  int writableSchema;    /* True if PRAGMA writable_schema=ON */
  int showHeader;        /* True to show column names in List or Column mode */
  int nCheck;            /* Number of ".check" commands run */
  unsigned shellFlgs;    /* Various flags */
  sqlite3_int64 szMax;   /* --maxsize argument to .open */
  char *zDestTable;      /* Name of destination table when MODE_Insert */
  char *zTempFile;       /* Temporary file that might need deleting */
  char zTestcase[30];    /* Name of current test case */
  char colSeparator[20]; /* Column separator character for several modes */
  char rowSeparator[20]; /* Row separator character for MODE_Ascii */
  char colSepPrior[20];  /* Saved column separator */
  char rowSepPrior[20];  /* Saved row separator */
................................................................................
  "       -x    Open in a spreadsheet",
  ".open ?OPTIONS? ?FILE?   Close existing database and reopen FILE",
  "     Options:",
  "        --append        Use appendvfs to append database to the end of FILE",
#ifdef SQLITE_ENABLE_DESERIALIZE
  "        --deserialize   Load into memory useing sqlite3_deserialize()",
  "        --hexdb         Load the output of \"dbtotxt\" as an in-memory database",
  "        --maxsize N     Maximum size for --hexdb or --deserialized database",
#endif
  "        --new           Initialize FILE to an empty database",
  "        --readonly      Open FILE readonly",
  "        --zip           FILE is a ZIP archive",
  ".output ?FILE?           Send output to FILE or stdout if FILE is omitted",
  "     If FILE begins with '|' then open it as a pipe.",
  ".print STRING...         Print literal STRING",
................................................................................
      }
      rc = sqlite3_deserialize(p->db, "main", aData, nData, nData,
                   SQLITE_DESERIALIZE_RESIZEABLE |
                   SQLITE_DESERIALIZE_FREEONCLOSE);
      if( rc ){
        utf8_printf(stderr, "Error: sqlite3_deserialize() returns %d\n", rc);
      }
      if( p->szMax>0 ){
        sqlite3_file_control(p->db, "main", SQLITE_FCNTL_SIZE_LIMIT, &p->szMax);
      }
    }
#endif
  }
}

/*
** Attempt to close the databaes connection.  Report errors.
................................................................................
    session_close_all(p);
    close_db(p->db);
    p->db = 0;
    p->zDbFilename = 0;
    sqlite3_free(p->zFreeOnClose);
    p->zFreeOnClose = 0;
    p->openMode = SHELL_OPEN_UNSPEC;
    p->szMax = 0;
    /* Check for command-line arguments */
    for(iName=1; iName<nArg && azArg[iName][0]=='-'; iName++){
      const char *z = azArg[iName];
      if( optionMatch(z,"new") ){
        newFlag = 1;
#ifdef SQLITE_HAVE_ZLIB
      }else if( optionMatch(z, "zip") ){
................................................................................
      }else if( optionMatch(z, "readonly") ){
        p->openMode = SHELL_OPEN_READONLY;
#ifdef SQLITE_ENABLE_DESERIALIZE
      }else if( optionMatch(z, "deserialize") ){
        p->openMode = SHELL_OPEN_DESERIALIZE;
      }else if( optionMatch(z, "hexdb") ){
        p->openMode = SHELL_OPEN_HEXDB;
      }else if( optionMatch(z, "maxsize") && iName+1<nArg ){
        p->szMax = integerValue(azArg[++iName]);
#endif /* SQLITE_ENABLE_DESERIALIZE */
      }else if( z[0]=='-' ){
        utf8_printf(stderr, "unknown option: %s\n", z);
        rc = 1;
        goto meta_command_exit;
      }
    }
................................................................................
  "   -append              append the database to the end of the file\n"
  "   -ascii               set output mode to 'ascii'\n"
  "   -bail                stop after hitting an error\n"
  "   -batch               force batch I/O\n"
  "   -column              set output mode to 'column'\n"
  "   -cmd COMMAND         run \"COMMAND\" before reading stdin\n"
  "   -csv                 set output mode to 'csv'\n"
#if defined(SQLITE_ENABLE_DESERIALIZE)
  "   -deserialize         open the database using sqlite3_deserialize()\n"
#endif
  "   -echo                print commands before execution\n"
  "   -init FILENAME       read/process named file\n"
  "   -[no]header          turn headers on or off\n"
#if defined(SQLITE_ENABLE_MEMSYS3) || defined(SQLITE_ENABLE_MEMSYS5)
  "   -heap SIZE           Size of heap for memsys3 or memsys5\n"
#endif
  "   -help                show this message\n"
  "   -html                set output mode to HTML\n"
  "   -interactive         force interactive I/O\n"
  "   -line                set output mode to 'line'\n"
  "   -list                set output mode to 'list'\n"
  "   -lookaside SIZE N    use N entries of SZ bytes for lookaside memory\n"
#if defined(SQLITE_ENABLE_DESERIALIZE)
  "   -maxsize N           maximum size for a --deserialize database\n"
#endif
  "   -mmap N              default mmap size set to N\n"
#ifdef SQLITE_ENABLE_MULTIPLEX
  "   -multiplex           enable the multiplexor VFS\n"
#endif
  "   -newline SEP         set output row separator. Default: '\\n'\n"
  "   -nullvalue TEXT      set text string for NULL values. Default ''\n"
  "   -pagecache SIZE N    use N slots of SZ bytes each for page cache memory\n"
................................................................................
      data.openMode = SHELL_OPEN_ZIPFILE;
#endif
    }else if( strcmp(z,"-append")==0 ){
      data.openMode = SHELL_OPEN_APPENDVFS;
#ifdef SQLITE_ENABLE_DESERIALIZE
    }else if( strcmp(z,"-deserialize")==0 ){
      data.openMode = SHELL_OPEN_DESERIALIZE;
    }else if( strcmp(z,"-maxsize")==0 && i+1<argc ){
      data.szMax = integerValue(argv[++i]);
#endif
    }else if( strcmp(z,"-readonly")==0 ){
      data.openMode = SHELL_OPEN_READONLY;
#if !defined(SQLITE_OMIT_VIRTUALTABLE) && defined(SQLITE_HAVE_ZLIB)
    }else if( strncmp(z, "-A",2)==0 ){
      /* All remaining command-line arguments are passed to the ".archive"
      ** command, so ignore them */
................................................................................
      data.openMode = SHELL_OPEN_ZIPFILE;
#endif
    }else if( strcmp(z,"-append")==0 ){
      data.openMode = SHELL_OPEN_APPENDVFS;
#ifdef SQLITE_ENABLE_DESERIALIZE
    }else if( strcmp(z,"-deserialize")==0 ){
      data.openMode = SHELL_OPEN_DESERIALIZE;
    }else if( strcmp(z,"-maxsize")==0 && i+1<argc ){
      data.szMax = integerValue(argv[++i]);
#endif
    }else if( strcmp(z,"-readonly")==0 ){
      data.openMode = SHELL_OPEN_READONLY;
    }else if( strcmp(z,"-ascii")==0 ){
      data.mode = MODE_Ascii;
      sqlite3_snprintf(sizeof(data.colSeparator), data.colSeparator,
                       SEP_Unit);

** The [SQLITE_FCNTL_SIZE_HINT] opcode is used by SQLite to give the VFS
** layer a hint of how large the database file will grow to be during the
** current transaction.  This hint is not guaranteed to be accurate but it
** is often close.  The underlying VFS might choose to preallocate database
** file space based on this hint in order to help writes to the database
** file run faster.
**









** <li>[[SQLITE_FCNTL_CHUNK_SIZE]]
** The [SQLITE_FCNTL_CHUNK_SIZE] opcode is used to request that the VFS
** extends and truncates the database file in chunks of a size specified
** by the user. The fourth argument to [sqlite3_file_control()] should 
** point to an integer (type int) containing the new chunk-size to use
** for the nominated database. Allocating database file space in large
** chunks (say 1MB at a time), may reduce file-system fragmentation and
................................................................................
#define SQLITE_FCNTL_WIN32_GET_HANDLE       29
#define SQLITE_FCNTL_PDB                    30
#define SQLITE_FCNTL_BEGIN_ATOMIC_WRITE     31
#define SQLITE_FCNTL_COMMIT_ATOMIC_WRITE    32
#define SQLITE_FCNTL_ROLLBACK_ATOMIC_WRITE  33
#define SQLITE_FCNTL_LOCK_TIMEOUT           34
#define SQLITE_FCNTL_DATA_VERSION           35


/* deprecated names */
#define SQLITE_GET_LOCKPROXYFILE      SQLITE_FCNTL_GET_LOCKPROXYFILE
#define SQLITE_SET_LOCKPROXYFILE      SQLITE_FCNTL_SET_LOCKPROXYFILE
#define SQLITE_LAST_ERRNO             SQLITE_FCNTL_LAST_ERRNO

** The [SQLITE_FCNTL_SIZE_HINT] opcode is used by SQLite to give the VFS
** layer a hint of how large the database file will grow to be during the
** current transaction.  This hint is not guaranteed to be accurate but it
** is often close.  The underlying VFS might choose to preallocate database
** file space based on this hint in order to help writes to the database
** file run faster.
**
** <li>[[SQLITE_FCNTL_SIZE_LIMIT]]
** The [SQLITE_FCNTL_SIZE_LIMIT] opcode is used by in-memory VFS that
** implements [sqlite3_deserialize()] to set an upper bound on the size
** of the in-memory database.  The argument is a pointer to a [sqlite3_int64].
** If the integer pointed to is negative, then it is filled in with the
** current limit.  Otherwise the limit is set to the larger of the value
** of the integer pointed to and the current database size.  The integer
** pointed to is set to the new limit.
**
** <li>[[SQLITE_FCNTL_CHUNK_SIZE]]
** The [SQLITE_FCNTL_CHUNK_SIZE] opcode is used to request that the VFS
** extends and truncates the database file in chunks of a size specified
** by the user. The fourth argument to [sqlite3_file_control()] should 
** point to an integer (type int) containing the new chunk-size to use
** for the nominated database. Allocating database file space in large
** chunks (say 1MB at a time), may reduce file-system fragmentation and
................................................................................
#define SQLITE_FCNTL_WIN32_GET_HANDLE       29
#define SQLITE_FCNTL_PDB                    30
#define SQLITE_FCNTL_BEGIN_ATOMIC_WRITE     31
#define SQLITE_FCNTL_COMMIT_ATOMIC_WRITE    32
#define SQLITE_FCNTL_ROLLBACK_ATOMIC_WRITE  33
#define SQLITE_FCNTL_LOCK_TIMEOUT           34
#define SQLITE_FCNTL_DATA_VERSION           35
#define SQLITE_FCNTL_SIZE_LIMIT             36

/* deprecated names */
#define SQLITE_GET_LOCKPROXYFILE      SQLITE_FCNTL_GET_LOCKPROXYFILE
#define SQLITE_SET_LOCKPROXYFILE      SQLITE_FCNTL_SET_LOCKPROXYFILE
#define SQLITE_LAST_ERRNO             SQLITE_FCNTL_LAST_ERRNO

                       (char*)0);
      rc = TCL_ERROR;
    }
    break;
  }

  /*
  **     $db deserialize ?DATABASE? VALUE
  **
  ** Reopen DATABASE (default "main") using the content in $VALUE
  */
  case DB_DESERIALIZE: {
#ifndef SQLITE_ENABLE_DESERIALIZE
    Tcl_AppendResult(interp, "MEMDB not available in this build",
                     (char*)0);
    rc = TCL_ERROR;
#else
    const char *zSchema;
    Tcl_Obj *pValue;
    unsigned char *pBA;
    unsigned char *pData;
    int len, xrc;



    

    if( objc==3 ){
      zSchema = 0;
      pValue = objv[2];
    }else if( objc==4 ){
      zSchema = Tcl_GetString(objv[2]);
      pValue = objv[3];
    }else{
      Tcl_WrongNumArgs(interp, 2, objv, "?DATABASE? VALUE");
      rc = TCL_ERROR;
      break;
    }





















    pBA = Tcl_GetByteArrayFromObj(pValue, &len);
    pData = sqlite3_malloc64( len );
    if( pData==0 && len>0 ){
      Tcl_AppendResult(interp, "out of memory", (char*)0);
      rc = TCL_ERROR;
    }else{

      if( len>0 ) memcpy(pData, pBA, len);
      xrc = sqlite3_deserialize(pDb->db, zSchema, pData, len, len,

                SQLITE_DESERIALIZE_FREEONCLOSE |

                SQLITE_DESERIALIZE_RESIZEABLE);


      if( xrc ){
        Tcl_AppendResult(interp, "unable to set MEMDB content", (char*)0);
        rc = TCL_ERROR;
      }


    }


#endif
    break; 
  }

  /*
  **    $db enable_load_extension BOOLEAN
  **

                       (char*)0);
      rc = TCL_ERROR;
    }
    break;
  }

  /*
  **     $db deserialize ?-maxsize N? ?-readonly BOOL? ?DATABASE? VALUE
  **
  ** Reopen DATABASE (default "main") using the content in $VALUE
  */
  case DB_DESERIALIZE: {
#ifndef SQLITE_ENABLE_DESERIALIZE
    Tcl_AppendResult(interp, "MEMDB not available in this build",
                     (char*)0);
    rc = TCL_ERROR;
#else
    const char *zSchema = 0;
    Tcl_Obj *pValue = 0;
    unsigned char *pBA;
    unsigned char *pData;
    int len, xrc;
    sqlite3_int64 mxSize = 0;
    int i;
    int isReadonly = 0;


    if( objc<3 ){






      Tcl_WrongNumArgs(interp, 2, objv, "?DATABASE? VALUE");
      rc = TCL_ERROR;
      break;
    }
    for(i=2; i<objc-1; i++){
      const char *z = Tcl_GetString(objv[i]);
      if( strcmp(z,"-maxsize")==0 && i<objc-2 ){
        rc = Tcl_GetWideIntFromObj(interp, objv[++i], &mxSize);
        if( rc ) goto deserialize_error;
        continue;
      }
      if( strcmp(z,"-readonly")==0 && i<objc-2 ){
        rc = Tcl_GetBooleanFromObj(interp, objv[++i], &isReadonly);
        if( rc ) goto deserialize_error;
        continue;
      }
      if( zSchema==0 && i==objc-2 && z[0]!='-' ){
        zSchema = z;
        continue;
      }
      Tcl_AppendResult(interp, "unknown option: ", z, (char*)0);
      rc = TCL_ERROR;
      goto deserialize_error;
    }
    pValue = objv[objc-1];
    pBA = Tcl_GetByteArrayFromObj(pValue, &len);
    pData = sqlite3_malloc64( len );
    if( pData==0 && len>0 ){
      Tcl_AppendResult(interp, "out of memory", (char*)0);
      rc = TCL_ERROR;
    }else{
      int flags;
      if( len>0 ) memcpy(pData, pBA, len);

      if( isReadonly ){
        flags = SQLITE_DESERIALIZE_FREEONCLOSE | SQLITE_DESERIALIZE_READONLY;
      }else{
        flags = SQLITE_DESERIALIZE_FREEONCLOSE | SQLITE_DESERIALIZE_RESIZEABLE;
      }
      xrc = sqlite3_deserialize(pDb->db, zSchema, pData, len, len, flags);
      if( xrc ){
        Tcl_AppendResult(interp, "unable to set MEMDB content", (char*)0);
        rc = TCL_ERROR;
      }
      if( mxSize>0 ){
        sqlite3_file_control(pDb->db, zSchema,SQLITE_FCNTL_SIZE_LIMIT,&mxSize);
      }
    }
deserialize_error:
#endif
    break; 
  }

  /*
  **    $db enable_load_extension BOOLEAN
  **

  DROP TABLE t2;
  PRAGMA page_count;
} {116}
do_execsql_test 140 {
  VACUUM;
  PRAGMA page_count;
} {2}


























# Build a largish on-disk database and serialize it.  Verify that the
# serialization works.
#
db close
forcedelete test.db
sqlite3 db test.db
................................................................................
do_test 600 {
  set rc [catch {db deserialize} msg]
  lappend rc $msg
} {1 {wrong # args: should be "db deserialize ?DATABASE? VALUE"}}
do_test 610 {
  set rc [catch {db deserialize a b c} msg]
  lappend rc $msg
} {1 {wrong # args: should be "db deserialize ?DATABASE? VALUE"}}
do_test 620 {
  set rc [catch {db serialize a b} msg]
  lappend rc $msg
} {1 {wrong # args: should be "db serialize ?DATABASE?"}}

finish_test

  DROP TABLE t2;
  PRAGMA page_count;
} {116}
do_execsql_test 140 {
  VACUUM;
  PRAGMA page_count;
} {2}

do_test 150 {
  catch {db deserialize -unknown 1 $db1} msg
  set msg
} {unknown option: -unknown}
do_test 151 {
  db deserialize -readonly 1 $db1
  db eval {SELECT * FROM t1}
} {1 2}
do_test 152 {
  catchsql {INSERT INTO t1 VALUES(3,4);}
} {1 {attempt to write a readonly database}}

breakpoint
do_test 160 {
  db deserialize -maxsize 32768 $db1
  db eval {SELECT * FROM t1}
} {1 2}
do_test 161 {
  db eval {INSERT INTO t1 VALUES(3,4); SELECT * FROM t1}
} {1 2 3 4}
do_test 162 {
  catchsql {INSERT INTO t1 VALUES(5,randomblob(100000))}
} {1 {database or disk is full}}


# Build a largish on-disk database and serialize it.  Verify that the
# serialization works.
#
db close
forcedelete test.db
sqlite3 db test.db
................................................................................
do_test 600 {
  set rc [catch {db deserialize} msg]
  lappend rc $msg
} {1 {wrong # args: should be "db deserialize ?DATABASE? VALUE"}}
do_test 610 {
  set rc [catch {db deserialize a b c} msg]
  lappend rc $msg
} {1 {unknown option: a}}
do_test 620 {
  set rc [catch {db serialize a b} msg]
  lappend rc $msg
} {1 {wrong # args: should be "db serialize ?DATABASE?"}}

finish_test