SQLite

soaktest:	testfixture$(TEXE) sqlite3$(TEXE)
	./testfixture$(TEXE) $(TOP)/test/all.test -soak=1

test:	testfixture$(TEXE) sqlite3$(TEXE)
	./testfixture$(TEXE) $(TOP)/test/veryquick.test

sqlite3_analyzer$(TEXE):	$(TESTFIXTURE_SRC) $(TOP)/tool/spaceanal.tcl
	sed \
	  -e '/^#/d' \

	  -e 's,\\,\\\\,g' \
	  -e 's,",\\",g' \
	  -e 's,^,",' \
	  -e 's,$$,\\n",' \
	  $(TOP)/tool/spaceanal.tcl >spaceanal_tcl.h
	$(LTLINK) -DTCLSH=2 -DSQLITE_TEST=1 -DSQLITE_CRASH_TEST=1 \
		-DSQLITE_SERVER=1 -DSQLITE_PRIVATE="" -DSQLITE_CORE \
		$(TEMP_STORE) -o $@ $(TESTFIXTURE_SRC) $(LIBTCL) $(TLIBS)





# Standard install and cleanup targets
#
lib_install:	libsqlite3.la
	$(INSTALL) -d $(DESTDIR)$(libdir)
	$(LTINSTALL) libsqlite3.la $(DESTDIR)$(libdir)
	

	rm -f sqlite3.h opcodes.*
	rm -rf .libs .deps
	rm -f lemon$(BEXE) lempar.c parse.* sqlite*.tar.gz
	rm -f mkkeywordhash$(BEXE) keywordhash.h
	rm -f $(PUBLISH)
	rm -f *.da *.bb *.bbg gmon.out
	rm -rf tsrc .target_source

	rm -f testfixture$(TEXE) test.db
	rm -f sqlite3.dll sqlite3.lib sqlite3.def
	rm -f sqlite3.c


distclean:	clean
	rm -f config.log config.status libtool Makefile sqlite3.pc

#
# Windows section
#

soaktest:	testfixture.exe sqlite3.exe
	.\testfixture.exe $(TOP)\test\all.test -soak=1

test:	testfixture.exe sqlite3.exe
	.\testfixture.exe $(TOP)\test\veryquick.test

spaceanal_tcl.h:	$(TOP)\tool\spaceanal.tcl
	$(NAWK) -f $(TOP)/tool/tostr.awk \


		$(TOP)\tool\spaceanal.tcl > spaceanal_tcl.h


sqlite3_analyzer.exe:	$(TESTFIXTURE_SRC) spaceanal_tcl.h
	$(LTLINK) -DTCLSH=2 -DSQLITE_TEST=1 -DSQLITE_CRASH_TEST=1 \
		-DSQLITE_SERVER=1 -DSQLITE_PRIVATE="" -DSQLITE_CORE \
		-DBUILD_sqlite -I$(TCLINCDIR) \
		$(TESTFIXTURE_SRC) \
		/link $(LTLINKOPTS) /LIBPATH:$(TCLLIBDIR) $(LIBTCL) $(TLIBS)

clean:
	del /Q *.lo *.ilk *.lib *.obj *.pdb sqlite3.exe libsqlite3.lib
	del /Q sqlite3.h opcodes.c opcodes.h
	del /Q lemon.exe lempar.c parse.*
	del /Q mkkeywordhash.exe keywordhash.h
	-rmdir /Q/S tsrc
	del /Q .target_source

	del /Q testfixture.exe testfixture.exp test.db
	del /Q sqlite3.dll sqlite3.lib sqlite3.exp sqlite3.def
	del /Q sqlite3.c
	del /Q sqlite3_analyzer.exe sqlite3_analyzer.exp spaceanal_tcl.h

#
# Windows section
#
dll: sqlite3.dll

sqlite3.def: libsqlite3.lib

3.7.8

#! /bin/sh
# Guess values for system-dependent variables and create Makefiles.
# Generated by GNU Autoconf 2.65 for sqlite 3.7.8.
#
#
# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
# 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation,
# Inc.
#
#
# This configure script is free software; the Free Software Foundation
# gives unlimited permission to copy, distribute and modify it.
## -------------------- ##
## M4sh Initialization. ##
## -------------------- ##

	    s//\1/
	    q
	  }
	  s/.*/./; q'`
      test -d "$as_dir" && break
    done
    test -z "$as_dirs" || eval "mkdir $as_dirs"
  } || test -d "$as_dir" || as_fn_error "cannot create directory $as_dir"


} # as_fn_mkdir_p
# as_fn_append VAR VALUE
# ----------------------
# Append the text in VALUE to the end of the definition contained in VAR. Take
# advantage of any shell optimizations that allow amortized linear growth over

  as_fn_arith ()
  {
    as_val=`expr "$@" || test $? -eq 1`
  }
fi # as_fn_arith


# as_fn_error ERROR [LINENO LOG_FD]
# ---------------------------------
# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
# script with status $?, using 1 if that was 0.
as_fn_error ()
{
  as_status=$?; test $as_status -eq 0 && as_status=1
  if test "$3"; then
    as_lineno=${as_lineno-"$2"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
    $as_echo "$as_me:${as_lineno-$LINENO}: error: $1" >&$3
  fi
  $as_echo "$as_me: error: $1" >&2
  as_fn_exit $as_status
} # as_fn_error

if expr a : '\(a\)' >/dev/null 2>&1 &&
   test "X`expr 00001 : '.*\(...\)'`" = X001; then
  as_expr=expr
else

test -n "$DJDIR" || exec 7<&0 </dev/null
exec 6>&1

# Name of the host.
# hostname on some systems (SVR3.2, Linux) returns a bogus exit status,
# so uname gets run too.
ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`

#
# Initializations.
#
ac_default_prefix=/usr/local
ac_clean_files=
ac_config_libobj_dir=.
LIBOBJS=
cross_compiling=no
subdirs=
MFLAGS=
MAKEFLAGS=

# Identity of this package.
PACKAGE_NAME='sqlite'
PACKAGE_TARNAME='sqlite'
PACKAGE_VERSION='3.7.8'
PACKAGE_STRING='sqlite 3.7.8'
PACKAGE_BUGREPORT=''
PACKAGE_URL=''

# Factoring default headers for most tests.
ac_includes_default="\
#include <stdio.h>
#ifdef HAVE_SYS_TYPES_H

  if test -n "$ac_prev"; then
    eval $ac_prev=\$ac_option
    ac_prev=
    continue
  fi

  case $ac_option in
  *=*)	ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;;

  *)	ac_optarg=yes ;;
  esac

  # Accept the important Cygnus configure options, so we can diagnose typos.

  case $ac_dashdash$ac_option in
  --)
    ac_dashdash=yes ;;

  | --dataroot=* | --dataroo=* | --dataro=* | --datar=*)
    datarootdir=$ac_optarg ;;

  -disable-* | --disable-*)
    ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
    # Reject names that are not valid shell variable names.
    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
      as_fn_error "invalid feature name: $ac_useropt"
    ac_useropt_orig=$ac_useropt
    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
    case $ac_user_opts in
      *"
"enable_$ac_useropt"
"*) ;;
      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig"

  -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*)
    dvidir=$ac_optarg ;;

  -enable-* | --enable-*)
    ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
    # Reject names that are not valid shell variable names.
    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
      as_fn_error "invalid feature name: $ac_useropt"
    ac_useropt_orig=$ac_useropt
    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
    case $ac_user_opts in
      *"
"enable_$ac_useropt"
"*) ;;
      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig"

  -version | --version | --versio | --versi | --vers | -V)
    ac_init_version=: ;;

  -with-* | --with-*)
    ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
    # Reject names that are not valid shell variable names.
    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
      as_fn_error "invalid package name: $ac_useropt"
    ac_useropt_orig=$ac_useropt
    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
    case $ac_user_opts in
      *"
"with_$ac_useropt"
"*) ;;
      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig"
	 ac_unrecognized_sep=', ';;
    esac
    eval with_$ac_useropt=\$ac_optarg ;;

  -without-* | --without-*)
    ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'`
    # Reject names that are not valid shell variable names.
    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
      as_fn_error "invalid package name: $ac_useropt"
    ac_useropt_orig=$ac_useropt
    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
    case $ac_user_opts in
      *"
"with_$ac_useropt"
"*) ;;
      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig"

  -x-libraries | --x-libraries | --x-librarie | --x-librari \
  | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
    ac_prev=x_libraries ;;
  -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
  | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
    x_libraries=$ac_optarg ;;

  -*) as_fn_error "unrecognized option: \`$ac_option'
Try \`$0 --help' for more information."
    ;;

  *=*)
    ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`
    # Reject names that are not valid shell variable names.
    case $ac_envvar in #(
      '' | [0-9]* | *[!_$as_cr_alnum]* )
      as_fn_error "invalid variable name: \`$ac_envvar'" ;;
    esac
    eval $ac_envvar=\$ac_optarg
    export $ac_envvar ;;

  *)
    # FIXME: should be removed in autoconf 3.0.
    $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2
    expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null &&
      $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2
    : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}
    ;;

  esac
done

if test -n "$ac_prev"; then
  ac_option=--`echo $ac_prev | sed 's/_/-/g'`
  as_fn_error "missing argument to $ac_option"
fi

if test -n "$ac_unrecognized_opts"; then
  case $enable_option_checking in
    no) ;;
    fatal) as_fn_error "unrecognized options: $ac_unrecognized_opts" ;;
    *)     $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;;
  esac
fi

# Check all directory arguments for consistency.
for ac_var in	exec_prefix prefix bindir sbindir libexecdir datarootdir \
		datadir sysconfdir sharedstatedir localstatedir includedir \

      eval $ac_var=\$ac_val;;
  esac
  # Be sure to have absolute directory names.
  case $ac_val in
    [\\/$]* | ?:[\\/]* )  continue;;
    NONE | '' ) case $ac_var in *prefix ) continue;; esac;;
  esac
  as_fn_error "expected an absolute directory name for --$ac_var: $ac_val"
done

# There might be people who depend on the old broken behavior: `$host'
# used to hold the argument of --host etc.
# FIXME: To remove some day.
build=$build_alias
host=$host_alias
target=$target_alias

# FIXME: To remove some day.
if test "x$host_alias" != x; then
  if test "x$build_alias" = x; then
    cross_compiling=maybe
    $as_echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host.
    If a cross compiler is detected then cross compile mode will be used." >&2
  elif test "x$build_alias" != "x$host_alias"; then
    cross_compiling=yes
  fi
fi

ac_tool_prefix=
test -n "$host_alias" && ac_tool_prefix=$host_alias-

test "$silent" = yes && exec 6>/dev/null


ac_pwd=`pwd` && test -n "$ac_pwd" &&
ac_ls_di=`ls -di .` &&
ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` ||
  as_fn_error "working directory cannot be determined"
test "X$ac_ls_di" = "X$ac_pwd_ls_di" ||
  as_fn_error "pwd does not report name of working directory"


# Find the source files, if location was not specified.
if test -z "$srcdir"; then
  ac_srcdir_defaulted=yes
  # Try the directory containing this script, then the parent directory.
  ac_confdir=`$as_dirname -- "$as_myself" ||

    srcdir=..
  fi
else
  ac_srcdir_defaulted=no
fi
if test ! -r "$srcdir/$ac_unique_file"; then
  test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .."
  as_fn_error "cannot find sources ($ac_unique_file) in $srcdir"
fi
ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work"
ac_abs_confdir=`(
	cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error "$ac_msg"
	pwd)`
# When building in place, set srcdir=.
if test "$ac_abs_confdir" = "$ac_pwd"; then
  srcdir=.
fi
# Remove unnecessary trailing slashes from srcdir.
# Double slashes in file names in object file debugging info

#
# Report the --help message.
#
if test "$ac_init_help" = "long"; then
  # Omit some internal or obsolete options to make the list less imposing.
  # This message is too long to be a string in the A/UX 3.1 sh.
  cat <<_ACEOF
\`configure' configures sqlite 3.7.8 to adapt to many kinds of systems.

Usage: $0 [OPTION]... [VAR=VALUE]...

To assign environment variables (e.g., CC, CFLAGS...), specify them as
VAR=VALUE.  See below for descriptions of some of the useful variables.

Defaults for the options are specified in brackets.

Configuration:
  -h, --help              display this help and exit
      --help=short        display options specific to this package
      --help=recursive    display the short help of all the included packages
  -V, --version           display version information and exit
  -q, --quiet, --silent   do not print \`checking...' messages
      --cache-file=FILE   cache test results in FILE [disabled]
  -C, --config-cache      alias for \`--cache-file=config.cache'
  -n, --no-create         do not create output files
      --srcdir=DIR        find the sources in DIR [configure dir or \`..']

Installation directories:
  --prefix=PREFIX         install architecture-independent files in PREFIX

  --build=BUILD     configure for building on BUILD [guessed]
  --host=HOST       cross-compile to build programs to run on HOST [BUILD]
_ACEOF
fi

if test -n "$ac_init_help"; then
  case $ac_init_help in
     short | recursive ) echo "Configuration of sqlite 3.7.8:";;
   esac
  cat <<\_ACEOF

Optional Features:
  --disable-option-checking  ignore unrecognized --enable/--with options
  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]

    cd "$ac_pwd" || { ac_status=$?; break; }
  done
fi

test -n "$ac_init_help" && exit $ac_status
if $ac_init_version; then
  cat <<\_ACEOF
sqlite configure 3.7.8
generated by GNU Autoconf 2.65

Copyright (C) 2009 Free Software Foundation, Inc.
This configure script is free software; the Free Software Foundation
gives unlimited permission to copy, distribute and modify it.
_ACEOF
  exit
fi

## ------------------------ ##

# Tests whether HEADER exists and can be compiled using the include files in
# INCLUDES, setting the cache variable VAR accordingly.
ac_fn_c_check_header_compile ()
{
  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
$as_echo_n "checking for $2... " >&6; }
if { as_var=$3; eval "test \"\${$as_var+set}\" = set"; }; then :
  $as_echo_n "(cached) " >&6
else
  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h.  */
$4
#include <$2>
_ACEOF

  ac_status=$?
  if test -s conftest.err; then
    grep -v '^ *+' conftest.err >conftest.er1
    cat conftest.er1 >&5
    mv -f conftest.er1 conftest.err
  fi
  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
  test $ac_status = 0; } >/dev/null && {
	 test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
	 test ! -s conftest.err
       }; then :
  ac_retval=0
else
  $as_echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5

# ----------------------------------
# Tests whether FUNC exists, setting the cache variable VAR accordingly
ac_fn_c_check_func ()
{
  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
$as_echo_n "checking for $2... " >&6; }
if { as_var=$3; eval "test \"\${$as_var+set}\" = set"; }; then :
  $as_echo_n "(cached) " >&6
else
  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h.  */
/* Define $2 to an innocuous variant, in case <limits.h> declares $2.
   For example, HP-UX 11i <limits.h> declares gettimeofday.  */
#define $2 innocuous_$2

# Tests whether TYPE exists after having included INCLUDES, setting cache
# variable VAR accordingly.
ac_fn_c_check_type ()
{
  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
$as_echo_n "checking for $2... " >&6; }
if { as_var=$3; eval "test \"\${$as_var+set}\" = set"; }; then :
  $as_echo_n "(cached) " >&6
else
  eval "$3=no"
  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h.  */
$4
int

# -------------------------------------------------------
# Tests whether HEADER exists, giving a warning if it cannot be compiled using
# the include files in INCLUDES and setting the cache variable VAR
# accordingly.
ac_fn_c_check_header_mongrel ()
{
  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
  if { as_var=$3; eval "test \"\${$as_var+set}\" = set"; }; then :
  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
$as_echo_n "checking for $2... " >&6; }
if { as_var=$3; eval "test \"\${$as_var+set}\" = set"; }; then :
  $as_echo_n "(cached) " >&6
fi
eval ac_res=\$$3
	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
$as_echo "$ac_res" >&6; }
else
  # Is the header compilable?

#include <$2>
_ACEOF
if ac_fn_c_try_cpp "$LINENO"; then :
  ac_header_preproc=yes
else
  ac_header_preproc=no
fi
rm -f conftest.err conftest.$ac_ext
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_preproc" >&5
$as_echo "$ac_header_preproc" >&6; }

# So?  What about this header?
case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in #((
  yes:no: )
    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&5

$as_echo "$as_me: WARNING: $2:     section \"Present But Cannot Be Compiled\"" >&2;}
    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5
$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;}
    ;;
esac
  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
$as_echo_n "checking for $2... " >&6; }
if { as_var=$3; eval "test \"\${$as_var+set}\" = set"; }; then :
  $as_echo_n "(cached) " >&6
else
  eval "$3=\$ac_header_compiler"
fi
eval ac_res=\$$3
	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
$as_echo "$ac_res" >&6; }
fi
  eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}

} # ac_fn_c_check_header_mongrel
cat >config.log <<_ACEOF
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.

It was created by sqlite $as_me 3.7.8, which was
generated by GNU Autoconf 2.65.  Invocation command line was

  $ $0 $@

_ACEOF
exec 5>>config.log
{
cat <<_ASUNAME

# WARNING: Use '\'' to represent an apostrophe within the trap.
# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug.
trap 'exit_status=$?
  # Save into config.log some information that might help in debugging.
  {
    echo

    cat <<\_ASBOX
## ---------------- ##
## Cache variables. ##
## ---------------- ##
_ASBOX
    echo
    # The following way of writing the cache mishandles newlines in values,
(
  for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do
    eval ac_val=\$$ac_var
    case $ac_val in #(
    *${as_nl}*)

      sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
      ;;
    esac |
    sort
)
    echo

    cat <<\_ASBOX
## ----------------- ##
## Output variables. ##
## ----------------- ##
_ASBOX
    echo
    for ac_var in $ac_subst_vars
    do
      eval ac_val=\$$ac_var
      case $ac_val in
      *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
      esac
      $as_echo "$ac_var='\''$ac_val'\''"
    done | sort
    echo

    if test -n "$ac_subst_files"; then
      cat <<\_ASBOX
## ------------------- ##
## File substitutions. ##
## ------------------- ##
_ASBOX
      echo
      for ac_var in $ac_subst_files
      do
	eval ac_val=\$$ac_var
	case $ac_val in
	*\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
	esac
	$as_echo "$ac_var='\''$ac_val'\''"
      done | sort
      echo
    fi

    if test -s confdefs.h; then
      cat <<\_ASBOX
## ----------- ##
## confdefs.h. ##
## ----------- ##
_ASBOX
      echo
      cat confdefs.h
      echo
    fi
    test "$ac_signal" != 0 &&
      $as_echo "$as_me: caught signal $ac_signal"
    $as_echo "$as_me: exit $exit_status"

# Let the site file select an alternate cache file if it wants to.
# Prefer an explicitly selected file to automatically selected ones.
ac_site_file1=NONE
ac_site_file2=NONE
if test -n "$CONFIG_SITE"; then



  ac_site_file1=$CONFIG_SITE


elif test "x$prefix" != xNONE; then
  ac_site_file1=$prefix/share/config.site
  ac_site_file2=$prefix/etc/config.site
else
  ac_site_file1=$ac_default_prefix/share/config.site
  ac_site_file2=$ac_default_prefix/etc/config.site
fi
for ac_site_file in "$ac_site_file1" "$ac_site_file2"
do
  test "x$ac_site_file" = xNONE && continue
  if test /dev/null != "$ac_site_file" && test -r "$ac_site_file"; then
    { $as_echo "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5
$as_echo "$as_me: loading site script $ac_site_file" >&6;}
    sed 's/^/| /' "$ac_site_file" >&5
    . "$ac_site_file"




  fi
done

if test -r "$cache_file"; then
  # Some versions of bash will fail to source /dev/null (special files
  # actually), so we avoid doing that.  DJGPP emulates it as a regular file.
  if test /dev/null != "$cache_file" && test -f "$cache_file"; then

  fi
done
if $ac_cache_corrupted; then
  { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
  { $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5
$as_echo "$as_me: error: changes in the environment can compromise the build" >&2;}
  as_fn_error "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5
fi
## -------------------- ##
## Main body of script. ##
## -------------------- ##

ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu



sqlite_version_sanity_check=`cat $srcdir/VERSION | tr -d '\n'`
if test "$PACKAGE_VERSION" != "$sqlite_version_sanity_check" ; then
as_fn_error "configure script is out of date:
 configure \$PACKAGE_VERSION = $PACKAGE_VERSION
 top level VERSION file     = $sqlite_version_sanity_check
please regen with autoconf" "$LINENO" 5
fi

# The following RCS revision string applies to configure.in
# $Revision: 1.56 $

ltmain="$ac_aux_dir/ltmain.sh"

ac_aux_dir=
for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do
  for ac_t in install-sh install.sh shtool; do
    if test -f "$ac_dir/$ac_t"; then
      ac_aux_dir=$ac_dir








      ac_install_sh="$ac_aux_dir/$ac_t -c"
      break 2
    fi
  done
done
if test -z "$ac_aux_dir"; then
  as_fn_error "cannot find install-sh, install.sh, or shtool in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" "$LINENO" 5
fi

# These three variables are undocumented and unsupported,
# and are intended to be withdrawn in a future Autoconf release.
# They can cause serious problems if a builder's source tree is in a directory
# whose full name contains unusual characters.
ac_config_guess="$SHELL $ac_aux_dir/config.guess"  # Please don't use this var.
ac_config_sub="$SHELL $ac_aux_dir/config.sub"  # Please don't use this var.
ac_configure="$SHELL $ac_aux_dir/configure"  # Please don't use this var.


# Make sure we can run config.sub.
$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 ||
  as_fn_error "cannot run $SHELL $ac_aux_dir/config.sub" "$LINENO" 5

{ $as_echo "$as_me:${as_lineno-$LINENO}: checking build system type" >&5
$as_echo_n "checking build system type... " >&6; }
if test "${ac_cv_build+set}" = set; then :
  $as_echo_n "(cached) " >&6
else
  ac_build_alias=$build_alias
test "x$ac_build_alias" = x &&
  ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"`
test "x$ac_build_alias" = x &&
  as_fn_error "cannot guess build type; you must specify one" "$LINENO" 5
ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` ||
  as_fn_error "$SHELL $ac_aux_dir/config.sub $ac_build_alias failed" "$LINENO" 5

fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_build" >&5
$as_echo "$ac_cv_build" >&6; }
case $ac_cv_build in
*-*-*) ;;
*) as_fn_error "invalid value of canonical build" "$LINENO" 5;;
esac
build=$ac_cv_build
ac_save_IFS=$IFS; IFS='-'
set x $ac_cv_build
shift
build_cpu=$1
build_vendor=$2

if test "${ac_cv_host+set}" = set; then :
  $as_echo_n "(cached) " >&6
else
  if test "x$host_alias" = x; then
  ac_cv_host=$ac_cv_build
else
  ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` ||
    as_fn_error "$SHELL $ac_aux_dir/config.sub $host_alias failed" "$LINENO" 5
fi

fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_host" >&5
$as_echo "$ac_cv_host" >&6; }
case $ac_cv_host in
*-*-*) ;;
*) as_fn_error "invalid value of canonical host" "$LINENO" 5;;
esac
host=$ac_cv_host
ac_save_IFS=$IFS; IFS='-'
set x $ac_cv_host
shift
host_cpu=$1
host_vendor=$2

fi

fi


test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
as_fn_error "no acceptable C compiler found in \$PATH
See \`config.log' for more details." "$LINENO" 5; }

# Provide some information about the compiler.
$as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5
set X $ac_compile
ac_compiler=$2
for ac_option in --version -v -V -qversion; do
  { { ac_try="$ac_compiler $ac_option >&5"

  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
$as_echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5

{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
{ as_fn_set_status 77
as_fn_error "C compiler cannot create executables
See \`config.log' for more details." "$LINENO" 5; }; }
else
  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
$as_echo "yes" >&6; }
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler default output file name" >&5
$as_echo_n "checking for C compiler default output file name... " >&6; }
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_file" >&5

	  break;;
    * ) break;;
  esac
done
else
  { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
as_fn_error "cannot compute suffix of executables: cannot compile and link
See \`config.log' for more details." "$LINENO" 5; }
fi
rm -f conftest conftest$ac_cv_exeext
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5
$as_echo "$ac_cv_exeext" >&6; }

rm -f conftest.$ac_ext
EXEEXT=$ac_cv_exeext

    cross_compiling=no
  else
    if test "$cross_compiling" = maybe; then
	cross_compiling=yes
    else
	{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
as_fn_error "cannot run C compiled programs.
If you meant to cross compile, use \`--host'.
See \`config.log' for more details." "$LINENO" 5; }
    fi
  fi
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $cross_compiling" >&5
$as_echo "$cross_compiling" >&6; }

rm -f conftest.$ac_ext conftest$ac_cv_exeext conftest.out

done
else
  $as_echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5

{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
as_fn_error "cannot compute suffix of object files: cannot compile
See \`config.log' for more details." "$LINENO" 5; }
fi
rm -f conftest.$ac_cv_objext conftest.$ac_ext
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_objext" >&5
$as_echo "$ac_cv_objext" >&6; }
OBJEXT=$ac_cv_objext
ac_objext=$OBJEXT

      $ac_path_SED_found && break 3
    done
  done
  done
IFS=$as_save_IFS
  if test -z "$ac_cv_path_SED"; then
    as_fn_error "no acceptable sed could be found in \$PATH" "$LINENO" 5
  fi
else
  ac_cv_path_SED=$SED
fi

fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_SED" >&5

      $ac_path_GREP_found && break 3
    done
  done
  done
IFS=$as_save_IFS
  if test -z "$ac_cv_path_GREP"; then
    as_fn_error "no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
  fi
else
  ac_cv_path_GREP=$GREP
fi

fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_GREP" >&5

      $ac_path_EGREP_found && break 3
    done
  done
  done
IFS=$as_save_IFS
  if test -z "$ac_cv_path_EGREP"; then
    as_fn_error "no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
  fi
else
  ac_cv_path_EGREP=$EGREP
fi

   fi
fi

      $ac_path_FGREP_found && break 3
    done
  done
  done
IFS=$as_save_IFS
  if test -z "$ac_cv_path_FGREP"; then
    as_fn_error "no acceptable fgrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
  fi
else
  ac_cv_path_FGREP=$FGREP
fi

   fi
fi

if test -n "$LD"; then
  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LD" >&5
$as_echo "$LD" >&6; }
else
  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi
test -z "$LD" && as_fn_error "no acceptable ld found in \$PATH" "$LINENO" 5
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if the linker ($LD) is GNU ld" >&5
$as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; }
if test "${lt_cv_prog_gnu_ld+set}" = set; then :
  $as_echo_n "(cached) " >&6
else
  # I'd rather use --version here, but apparently some GNU lds only accept -v.
case `$LD -v 2>&1 </dev/null` in

{ $as_echo "$as_me:${as_lineno-$LINENO}: checking the name lister ($NM) interface" >&5
$as_echo_n "checking the name lister ($NM) interface... " >&6; }
if test "${lt_cv_nm_interface+set}" = set; then :
  $as_echo_n "(cached) " >&6
else
  lt_cv_nm_interface="BSD nm"
  echo "int some_variable = 0;" > conftest.$ac_ext
  (eval echo "\"\$as_me:3891: $ac_compile\"" >&5)
  (eval "$ac_compile" 2>conftest.err)
  cat conftest.err >&5
  (eval echo "\"\$as_me:3894: $NM \\\"conftest.$ac_objext\\\"\"" >&5)
  (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out)
  cat conftest.err >&5
  (eval echo "\"\$as_me:3897: output\"" >&5)
  cat conftest.out >&5
  if $GREP 'External.*some_variable' conftest.out > /dev/null; then
    lt_cv_nm_interface="MS dumpbin"
  fi
  rm -f conftest*
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_nm_interface" >&5

	;;
    esac
  fi
  rm -rf conftest*
  ;;
*-*-irix6*)
  # Find out which ABI we are using.
  echo '#line 5103 "configure"' > conftest.$ac_ext
  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
  (eval $ac_compile) 2>&5
  ac_status=$?
  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
  test $ac_status = 0; }; then
    if test "$lt_cv_prog_gnu_ld" = yes; then
      case `/usr/bin/file conftest.$ac_objext` in

_ACEOF
if ac_fn_c_try_cpp "$LINENO"; then :

else
  # Broken: fails on valid input.
continue
fi
rm -f conftest.err conftest.$ac_ext

  # OK, works on sane cases.  Now check whether nonexistent headers
  # can be detected and how.
  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h.  */
#include <ac_nonexistent.h>
_ACEOF
if ac_fn_c_try_cpp "$LINENO"; then :
  # Broken: success on invalid input.
continue
else
  # Passes both tests.
ac_preproc_ok=:
break
fi
rm -f conftest.err conftest.$ac_ext

done
# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
rm -f conftest.err conftest.$ac_ext
if $ac_preproc_ok; then :
  break
fi

    done
    ac_cv_prog_CPP=$CPP

_ACEOF
if ac_fn_c_try_cpp "$LINENO"; then :

else
  # Broken: fails on valid input.
continue
fi
rm -f conftest.err conftest.$ac_ext

  # OK, works on sane cases.  Now check whether nonexistent headers
  # can be detected and how.
  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h.  */
#include <ac_nonexistent.h>
_ACEOF
if ac_fn_c_try_cpp "$LINENO"; then :
  # Broken: success on invalid input.
continue
else
  # Passes both tests.
ac_preproc_ok=:
break
fi
rm -f conftest.err conftest.$ac_ext

done
# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
rm -f conftest.err conftest.$ac_ext
if $ac_preproc_ok; then :

else
  { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
as_fn_error "C preprocessor \"$CPP\" fails sanity check
See \`config.log' for more details." "$LINENO" 5; }
fi

ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu

# On IRIX 5.3, sys/types and inttypes.h are conflicting.
for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \
		  inttypes.h stdint.h unistd.h
do :
  as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
ac_fn_c_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default
"
eval as_val=\$$as_ac_Header
   if test "x$as_val" = x""yes; then :
  cat >>confdefs.h <<_ACEOF
#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
_ACEOF

fi

done

   # Note that $ac_compile itself does not contain backslashes and begins
   # with a dollar sign (not a hyphen), so the echo should work correctly.
   # The option is referenced via a variable to avoid confusing sed.
   lt_compile=`echo "$ac_compile" | $SED \
   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
   -e 's:$: $lt_compiler_flag:'`
   (eval echo "\"\$as_me:6629: $lt_compile\"" >&5)
   (eval "$lt_compile" 2>conftest.err)
   ac_status=$?
   cat conftest.err >&5
   echo "$as_me:6633: \$? = $ac_status" >&5
   if (exit $ac_status) && test -s "$ac_outfile"; then
     # The compiler can only warn and ignore the option if not recognized
     # So say no if there are warnings other than the usual output.
     $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
     $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
     if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
       lt_cv_prog_compiler_rtti_exceptions=yes

   # Note that $ac_compile itself does not contain backslashes and begins
   # with a dollar sign (not a hyphen), so the echo should work correctly.
   # The option is referenced via a variable to avoid confusing sed.
   lt_compile=`echo "$ac_compile" | $SED \
   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
   -e 's:$: $lt_compiler_flag:'`
   (eval echo "\"\$as_me:6968: $lt_compile\"" >&5)
   (eval "$lt_compile" 2>conftest.err)
   ac_status=$?
   cat conftest.err >&5
   echo "$as_me:6972: \$? = $ac_status" >&5
   if (exit $ac_status) && test -s "$ac_outfile"; then
     # The compiler can only warn and ignore the option if not recognized
     # So say no if there are warnings other than the usual output.
     $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
     $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
     if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
       lt_cv_prog_compiler_pic_works=yes

   # (2) before a word containing "conftest.", or (3) at the end.
   # Note that $ac_compile itself does not contain backslashes and begins
   # with a dollar sign (not a hyphen), so the echo should work correctly.
   lt_compile=`echo "$ac_compile" | $SED \
   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
   -e 's:$: $lt_compiler_flag:'`
   (eval echo "\"\$as_me:7073: $lt_compile\"" >&5)
   (eval "$lt_compile" 2>out/conftest.err)
   ac_status=$?
   cat out/conftest.err >&5
   echo "$as_me:7077: \$? = $ac_status" >&5
   if (exit $ac_status) && test -s out/conftest2.$ac_objext
   then
     # The compiler can only warn and ignore the option if not recognized
     # So say no if there are warnings
     $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
     $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
     if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then

   # (2) before a word containing "conftest.", or (3) at the end.
   # Note that $ac_compile itself does not contain backslashes and begins
   # with a dollar sign (not a hyphen), so the echo should work correctly.
   lt_compile=`echo "$ac_compile" | $SED \
   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
   -e 's:$: $lt_compiler_flag:'`
   (eval echo "\"\$as_me:7128: $lt_compile\"" >&5)
   (eval "$lt_compile" 2>out/conftest.err)
   ac_status=$?
   cat out/conftest.err >&5
   echo "$as_me:7132: \$? = $ac_status" >&5
   if (exit $ac_status) && test -s out/conftest2.$ac_objext
   then
     # The compiler can only warn and ignore the option if not recognized
     # So say no if there are warnings
     $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
     $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
     if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then

else
  	  if test "$cross_compiling" = yes; then :
  lt_cv_dlopen_self=cross
else
  lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
  lt_status=$lt_dlunknown
  cat > conftest.$ac_ext <<_LT_EOF
#line 9508 "configure"
#include "confdefs.h"

#if HAVE_DLFCN_H
#include <dlfcn.h>
#endif

#include <stdio.h>

else
  	  if test "$cross_compiling" = yes; then :
  lt_cv_dlopen_self_static=cross
else
  lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
  lt_status=$lt_dlunknown
  cat > conftest.$ac_ext <<_LT_EOF
#line 9604 "configure"
#include "confdefs.h"

#if HAVE_DLFCN_H
#include <dlfcn.h>
#endif

#include <stdio.h>

#########
# Check for needed/wanted headers
for ac_header in sys/types.h stdlib.h stdint.h inttypes.h
do :
  as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
ac_fn_c_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default"
eval as_val=\$$as_ac_Header
   if test "x$as_val" = x""yes; then :
  cat >>confdefs.h <<_ACEOF
#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
_ACEOF

fi

done


#########
# Figure out whether or not we have these functions
#
for ac_func in usleep fdatasync localtime_r gmtime_r localtime_s utime
do :
  as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh`
ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var"
eval as_val=\$$as_ac_var
   if test "x$as_val" = x""yes; then :
  cat >>confdefs.h <<_ACEOF
#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1
_ACEOF

fi
done

else

    # First check to see if --with-tcl was specified.
    if test x"${with_tclconfig}" != x ; then
      if test -f "${with_tclconfig}/tclConfig.sh" ; then
        ac_cv_c_tclconfig=`(cd ${with_tclconfig}; pwd)`
      else
        as_fn_error "${with_tclconfig} directory doesn't contain tclConfig.sh" "$LINENO" 5
      fi
    fi

    # Start autosearch by asking tclsh
    if test x"$cross_compiling" = xno; then
      for i in `echo 'puts stdout $auto_path' | ${TCLSH_CMD}`
      do

			found="no"
			if test "$cross_compiling" != yes; then
				for dir in /usr /usr/local /usr/local/readline /usr/contrib /mingw; do
					for subdir in include include/readline; do
						as_ac_File=`$as_echo "ac_cv_file_$dir/$subdir/readline.h" | $as_tr_sh`
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $dir/$subdir/readline.h" >&5
$as_echo_n "checking for $dir/$subdir/readline.h... " >&6; }
if { as_var=$as_ac_File; eval "test \"\${$as_var+set}\" = set"; }; then :
  $as_echo_n "(cached) " >&6
else
  test "$cross_compiling" = yes &&
  as_fn_error "cannot check for file existence when cross compiling" "$LINENO" 5
if test -r "$dir/$subdir/readline.h"; then
  eval "$as_ac_File=yes"
else
  eval "$as_ac_File=no"
fi
fi
eval ac_res=\$$as_ac_File
	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
$as_echo "$ac_res" >&6; }
eval as_val=\$$as_ac_File
   if test "x$as_val" = x""yes; then :
  found=yes
fi

						if test "$found" = "yes"; then
							TARGET_READLINE_INC="-I$dir/$subdir"
							break
						fi

# Let make expand exec_prefix.
test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'

DEFS=-DHAVE_CONFIG_H

ac_libobjs=
ac_ltlibobjs=

for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
  # 1. Remove the extension, and $U if already installed.
  ac_script='s/\$U\././;s/\.o$//;s/\.obj$//'
  ac_i=`$as_echo "$ac_i" | sed "$ac_script"`
  # 2. Prepend LIBOBJDIR.  When used with automake>=1.10 LIBOBJDIR
  #    will be set to the directory where LIBOBJS objects are built.
  as_fn_append ac_libobjs " \${LIBOBJDIR}$ac_i\$U.$ac_objext"

LANGUAGE=C
export LANGUAGE

# CDPATH.
(unset CDPATH) >/dev/null 2>&1 && unset CDPATH


# as_fn_error ERROR [LINENO LOG_FD]
# ---------------------------------
# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
# script with status $?, using 1 if that was 0.
as_fn_error ()
{
  as_status=$?; test $as_status -eq 0 && as_status=1
  if test "$3"; then
    as_lineno=${as_lineno-"$2"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
    $as_echo "$as_me:${as_lineno-$LINENO}: error: $1" >&$3
  fi
  $as_echo "$as_me: error: $1" >&2
  as_fn_exit $as_status
} # as_fn_error


# as_fn_set_status STATUS
# -----------------------
# Set $? to STATUS, without forking.

	    s//\1/
	    q
	  }
	  s/.*/./; q'`
      test -d "$as_dir" && break
    done
    test -z "$as_dirs" || eval "mkdir $as_dirs"
  } || test -d "$as_dir" || as_fn_error "cannot create directory $as_dir"


} # as_fn_mkdir_p
if mkdir -p . 2>/dev/null; then
  as_mkdir_p='mkdir -p "$as_dir"'
else
  test -d ./-p && rmdir ./-p

test $as_write_fail = 0 && chmod +x $CONFIG_STATUS || ac_write_fail=1

cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
# Save the log message, to keep $0 and so on meaningful, and to
# report actual input values of CONFIG_FILES etc. instead of their
# values after options handling.
ac_log="
This file was extended by sqlite $as_me 3.7.8, which was
generated by GNU Autoconf 2.65.  Invocation command line was

  CONFIG_FILES    = $CONFIG_FILES
  CONFIG_HEADERS  = $CONFIG_HEADERS
  CONFIG_LINKS    = $CONFIG_LINKS
  CONFIG_COMMANDS = $CONFIG_COMMANDS
  $ $0 $@

Report bugs to the package provider."

_ACEOF
cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`"
ac_cs_version="\\
sqlite config.status 3.7.8
configured by $0, generated by GNU Autoconf 2.65,
  with options \\"\$ac_cs_config\\"

Copyright (C) 2009 Free Software Foundation, Inc.
This config.status script is free software; the Free Software Foundation
gives unlimited permission to copy, distribute and modify it."

ac_pwd='$ac_pwd'
srcdir='$srcdir'
INSTALL='$INSTALL'
AWK='$AWK'
test -n "\$AWK" || AWK=awk
_ACEOF

cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
# The default lists apply if the user does not specify any file.
ac_need_defaults=:
while test $# != 0
do
  case $1 in
  --*=*)
    ac_option=`expr "X$1" : 'X\([^=]*\)='`
    ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'`
    ac_shift=:
    ;;





  *)
    ac_option=$1
    ac_optarg=$2
    ac_shift=shift
    ;;
  esac

    $as_echo "$ac_cs_config"; exit ;;
  --debug | --debu | --deb | --de | --d | -d )
    debug=: ;;
  --file | --fil | --fi | --f )
    $ac_shift
    case $ac_optarg in
    *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;

    esac
    as_fn_append CONFIG_FILES " '$ac_optarg'"
    ac_need_defaults=false;;
  --header | --heade | --head | --hea )
    $ac_shift
    case $ac_optarg in
    *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
    esac
    as_fn_append CONFIG_HEADERS " '$ac_optarg'"
    ac_need_defaults=false;;
  --he | --h)
    # Conflict between --help and --header
    as_fn_error "ambiguous option: \`$1'
Try \`$0 --help' for more information.";;
  --help | --hel | -h )
    $as_echo "$ac_cs_usage"; exit ;;
  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
  | -silent | --silent | --silen | --sile | --sil | --si | --s)
    ac_cs_silent=: ;;

  # This is an error.
  -*) as_fn_error "unrecognized option: \`$1'
Try \`$0 --help' for more information." ;;

  *) as_fn_append ac_config_targets " $1"
     ac_need_defaults=false ;;

  esac
  shift

do
  case $ac_config_target in
    "libtool") CONFIG_COMMANDS="$CONFIG_COMMANDS libtool" ;;
    "config.h") CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;;
    "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;;
    "sqlite3.pc") CONFIG_FILES="$CONFIG_FILES sqlite3.pc" ;;

  *) as_fn_error "invalid argument: \`$ac_config_target'" "$LINENO" 5;;
  esac
done


# If the user did not use the arguments to specify the items to instantiate,
# then the envvar interface is used.  Set only those that are not.
# We use the long form for the default assignment because of an extremely

{
  tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` &&
  test -n "$tmp" && test -d "$tmp"
}  ||
{
  tmp=./conf$$-$RANDOM
  (umask 077 && mkdir "$tmp")
} || as_fn_error "cannot create a temporary directory in ." "$LINENO" 5

# Set up the scripts for CONFIG_FILES section.
# No need to generate them if there are no CONFIG_FILES.
# This happens for instance with `./config.status config.h'.
if test -n "$CONFIG_FILES"; then


ac_cr=`echo X | tr X '\015'`
# On cygwin, bash can eat \r inside `` if the user requested igncr.
# But we know of no other shell where ac_cr would be empty at this
# point, so we can use a bashism as a fallback.
if test "x$ac_cr" = x; then
  eval ac_cr=\$\'\\r\'
fi
ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' </dev/null 2>/dev/null`
if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then
  ac_cs_awk_cr='\r'
else
  ac_cs_awk_cr=$ac_cr
fi

echo 'BEGIN {' >"$tmp/subs1.awk" &&
_ACEOF


{
  echo "cat >conf$$subs.awk <<_ACEOF" &&
  echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' &&
  echo "_ACEOF"
} >conf$$subs.sh ||
  as_fn_error "could not make $CONFIG_STATUS" "$LINENO" 5
ac_delim_num=`echo "$ac_subst_vars" | grep -c '$'`
ac_delim='%!_!# '
for ac_last_try in false false false false false :; do
  . ./conf$$subs.sh ||
    as_fn_error "could not make $CONFIG_STATUS" "$LINENO" 5

  ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X`
  if test $ac_delim_n = $ac_delim_num; then
    break
  elif $ac_last_try; then
    as_fn_error "could not make $CONFIG_STATUS" "$LINENO" 5
  else
    ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
  fi
done
rm -f conf$$subs.sh

cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1

_ACEOF
cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then
  sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g"
else
  cat
fi < "$tmp/subs1.awk" > "$tmp/subs.awk" \
  || as_fn_error "could not setup config files machinery" "$LINENO" 5
_ACEOF

# VPATH may cause trouble with some makes, so we remove $(srcdir),
# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and
# trailing colons and then remove the whole line if VPATH becomes empty
# (actually we leave an empty line to preserve line numbers).
if test "x$srcdir" = x.; then
  ac_vpsub='/^[	 ]*VPATH[	 ]*=/{




s/:*\$(srcdir):*/:/
s/:*\${srcdir}:*/:/
s/:*@srcdir@:*/:/
s/^\([^=]*=[	 ]*\):*/\1/
s/:*$//




s/^[^=]*=[	 ]*$//
}'
fi

cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
fi # test -n "$CONFIG_FILES"

# handling of long lines.
ac_delim='%!_!# '
for ac_last_try in false false :; do
  ac_t=`sed -n "/$ac_delim/p" confdefs.h`
  if test -z "$ac_t"; then
    break
  elif $ac_last_try; then
    as_fn_error "could not make $CONFIG_HEADERS" "$LINENO" 5
  else
    ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
  fi
done

# For the awk script, D is an array of macro values keyed by name,
# likewise P contains macro parameters if any.  Preserve backslash

    }
  }
}
{ print }
_ACAWK
_ACEOF
cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
  as_fn_error "could not setup config headers machinery" "$LINENO" 5
fi # test -n "$CONFIG_HEADERS"


eval set X "  :F $CONFIG_FILES  :H $CONFIG_HEADERS    :C $CONFIG_COMMANDS"
shift
for ac_tag
do
  case $ac_tag in
  :[FHLC]) ac_mode=$ac_tag; continue;;
  esac
  case $ac_mode$ac_tag in
  :[FHL]*:*);;
  :L* | :C*:*) as_fn_error "invalid tag \`$ac_tag'" "$LINENO" 5;;
  :[FH]-) ac_tag=-:-;;
  :[FH]*) ac_tag=$ac_tag:$ac_tag.in;;
  esac
  ac_save_IFS=$IFS
  IFS=:
  set x $ac_tag
  IFS=$ac_save_IFS

	 # (if the path is not absolute).  The absolute path cannot be DOS-style,
	 # because $ac_f cannot contain `:'.
	 test -f "$ac_f" ||
	   case $ac_f in
	   [\\/$]*) false;;
	   *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";;
	   esac ||
	   as_fn_error "cannot find input file: \`$ac_f'" "$LINENO" 5;;
      esac
      case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac
      as_fn_append ac_file_inputs " '$ac_f'"
    done

    # Let's still pretend it is `configure' which instantiates (i.e., don't
    # use $as_me), people would be surprised to read:

       ac_sed_conf_input=`$as_echo "$configure_input" |
       sed 's/[\\\\&|]/\\\\&/g'`;; #(
    *) ac_sed_conf_input=$configure_input;;
    esac

    case $ac_tag in
    *:-:* | *:-) cat >"$tmp/stdin" \
      || as_fn_error "could not create $ac_file" "$LINENO" 5 ;;
    esac
    ;;
  esac

  ac_dir=`$as_dirname -- "$ac_file" ||
$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
	 X"$ac_file" : 'X\(//\)[^/]' \| \

s&@builddir@&$ac_builddir&;t t
s&@abs_builddir@&$ac_abs_builddir&;t t
s&@abs_top_builddir@&$ac_abs_top_builddir&;t t
s&@INSTALL@&$ac_INSTALL&;t t
$ac_datarootdir_hack
"
eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$tmp/subs.awk" >$tmp/out \
  || as_fn_error "could not create $ac_file" "$LINENO" 5

test -z "$ac_datarootdir_hack$ac_datarootdir_seen" &&
  { ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } &&
  { ac_out=`sed -n '/^[	 ]*datarootdir[	 ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } &&
  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir'
which seems to be undefined.  Please make sure it is defined." >&5
$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir'
which seems to be undefined.  Please make sure it is defined." >&2;}

  rm -f "$tmp/stdin"
  case $ac_file in
  -) cat "$tmp/out" && rm -f "$tmp/out";;
  *) rm -f "$ac_file" && mv "$tmp/out" "$ac_file";;
  esac \
  || as_fn_error "could not create $ac_file" "$LINENO" 5
 ;;
  :H)
  #
  # CONFIG_HEADER
  #
  if test x"$ac_file" != x-; then
    {
      $as_echo "/* $configure_input  */" \
      && eval '$AWK -f "$tmp/defines.awk"' "$ac_file_inputs"
    } >"$tmp/config.h" \
      || as_fn_error "could not create $ac_file" "$LINENO" 5
    if diff "$ac_file" "$tmp/config.h" >/dev/null 2>&1; then
      { $as_echo "$as_me:${as_lineno-$LINENO}: $ac_file is unchanged" >&5
$as_echo "$as_me: $ac_file is unchanged" >&6;}
    else
      rm -f "$ac_file"
      mv "$tmp/config.h" "$ac_file" \
	|| as_fn_error "could not create $ac_file" "$LINENO" 5
    fi
  else
    $as_echo "/* $configure_input  */" \
      && eval '$AWK -f "$tmp/defines.awk"' "$ac_file_inputs" \
      || as_fn_error "could not create -" "$LINENO" 5
  fi
 ;;

  :C)  { $as_echo "$as_me:${as_lineno-$LINENO}: executing $ac_file commands" >&5
$as_echo "$as_me: executing $ac_file commands" >&6;}
 ;;
  esac

as_fn_exit 0
_ACEOF
ac_clean_files=$ac_clean_files_save

test $ac_write_fail = 0 ||
  as_fn_error "write failure creating $CONFIG_STATUS" "$LINENO" 5


# configure is writing to config.log, and then calls config.status.
# config.status does its own redirection, appending to config.log.
# Unfortunately, on DOS this fails, as config.log is still kept open
# by configure, so config.status won't be able to write to it; its
# output is simply discarded.  So we exec the FD to /dev/null,
# effectively closing config.log, so it can be properly (re)opened and
# appended to by config.status.  When coming back to configure, we
# need to make the FD available again.
if test "$no_create" != yes; then
  ac_cs_success=:
  ac_config_status_args=
  test "$silent" = yes &&
    ac_config_status_args="$ac_config_status_args --quiet"
  exec 5>/dev/null
  $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false
  exec 5>>config.log
  # Use ||, not &&, to avoid exiting from the if with $? = 1, which
  # would make configure fail if this is the last instruction.
  $ac_cs_success || as_fn_exit $?
fi
if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then
  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5
$as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;}
fi

# Rules for building test programs and for running tests
#
tclsqlite3:	$(TOP)/src/tclsqlite.c libsqlite3.a
	$(TCCX) $(TCL_FLAGS) -DTCLSH=1 -o tclsqlite3 \
		$(TOP)/src/tclsqlite.c libsqlite3.a $(LIBTCL) $(THREADLIB)












# Rules to build the 'testfixture' application.
#
TESTFIXTURE_FLAGS  = -DSQLITE_TEST=1 -DSQLITE_CRASH_TEST=1
TESTFIXTURE_FLAGS += -DSQLITE_SERVER=1 -DSQLITE_PRIVATE="" -DSQLITE_CORE 

testfixture$(EXE): $(TESTSRC2) libsqlite3.a $(TESTSRC) $(TOP)/src/tclsqlite.c

threadtest3$(EXE): sqlite3.o $(TOP)/test/threadtest3.c $(TOP)/test/tt3_checkpoint.c
	$(TCCX) -O2 sqlite3.o $(TOP)/test/threadtest3.c \
		-o threadtest3$(EXE) $(THREADLIB)

threadtest: threadtest3$(EXE)
	./threadtest3$(EXE)

sqlite3_analyzer$(EXE):	$(TOP)/src/tclsqlite.c sqlite3.c $(TESTSRC) \
			$(TOP)/tool/spaceanal.tcl
	$(NAWK) -f $(TOP)/tool/tostr.awk $(TOP)/tool/spaceanal.tcl \
		 >spaceanal_tcl.h
	$(TCCX) $(TCL_FLAGS) -DTCLSH=2 $(TESTFIXTURE_FLAGS)                    \
		-DSQLITE_TEST=1 -DSQLITE_PRIVATE=""                            \
		$(TESTSRC) $(TOP)/src/tclsqlite.c sqlite3.c                    \
		-o sqlite3_analyzer$(EXE)                                      \
		$(LIBTCL) $(THREADLIB)

TEST_EXTENSION = $(SHPREFIX)testloadext.$(SO)
$(TEST_EXTENSION): $(TOP)/src/test_loadext.c
	$(MKSHLIB) $(TOP)/src/test_loadext.c -o $(TEST_EXTENSION)

extensiontest: testfixture$(EXE) $(TEST_EXTENSION)
	./testfixture$(EXE) $(TOP)/test/loadext.test

#
install:	sqlite3 libsqlite3.a sqlite3.h
	mv sqlite3 /usr/bin
	mv libsqlite3.a /usr/lib
	mv sqlite3.h /usr/include

clean:	
	rm -f *.o sqlite3 libsqlite3.a sqlite3.h opcodes.*
	rm -f lemon lempar.c parse.* sqlite*.tar.gz mkkeywordhash keywordhash.h
	rm -f $(PUBLISH)
	rm -f *.da *.bb *.bbg gmon.out
	rm -rf tsrc target_source
	rm -f testloadext.dll libtestloadext.so




	rm -f sqlite3.c fts?amal.c tclsqlite3.c

#endif
#ifdef SQLITE_OMIT_WSD
  "OMIT_WSD",
#endif
#ifdef SQLITE_OMIT_XFER_OPT
  "OMIT_XFER_OPT",
#endif
#ifdef SQLITE_PAGECACHE_BLOCKALLOC
  "PAGECACHE_BLOCKALLOC",
#endif
#ifdef SQLITE_PERFORMANCE_TRACE
  "PERFORMANCE_TRACE",
#endif
#ifdef SQLITE_PROXY_DEBUG
  "PROXY_DEBUG",
#endif
#ifdef SQLITE_SECURE_DELETE

  int pageSize;               /* Number of bytes in a page */
  Pgno mxPgno;                /* Maximum allowed size of the database */
  i64 journalSizeLimit;       /* Size limit for persistent journal files */
  char *zFilename;            /* Name of the database file */
  char *zJournal;             /* Name of the journal file */
  int (*xBusyHandler)(void*); /* Function to call when busy */
  void *pBusyHandlerArg;      /* Context argument for xBusyHandler */

#ifdef SQLITE_TEST
  int nHit, nMiss;            /* Cache hits and missing */
  int nRead, nWrite;          /* Database pages read/written */
#endif
  void (*xReiniter)(DbPage*); /* Call this routine when reloading pages */
#ifdef SQLITE_HAS_CODEC
  void *(*xCodec)(void*,void*,Pgno,int); /* Routine for en/decoding data */
  void (*xCodecSizeChng)(void*,int,int); /* Notify of page size changes */
  void (*xCodecFree)(void*);             /* Destructor for the codec */

  ** pages belonging to the same sector.
  **
  ** The doNotSpill flag inhibits all cache spilling regardless of whether
  ** or not a sync is required.  This is set during a rollback.
  **
  ** Spilling is also prohibited when in an error state since that could
  ** lead to database corruption.   In the current implementaton it 
  ** is impossible for sqlite3PCacheFetch() to be called with createFlag==1
  ** while in the error state, hence it is impossible for this routine to
  ** be called in the error state.  Nevertheless, we include a NEVER()
  ** test for the error state as a safeguard against future changes.
  */
  if( NEVER(pPager->errCode) ) return SQLITE_OK;
  if( pPager->doNotSpill ) return SQLITE_OK;
  if( pPager->doNotSyncSpill && (pPg->flags & PGHDR_NEED_SYNC)!=0 ){

  assert( (*ppPage)->pgno==pgno );
  assert( (*ppPage)->pPager==pPager || (*ppPage)->pPager==0 );

  if( (*ppPage)->pPager && !noContent ){
    /* In this case the pcache already contains an initialized copy of
    ** the page. Return without further ado.  */
    assert( pgno<=PAGER_MAX_PGNO && pgno!=PAGER_MJ_PGNO(pPager) );
    PAGER_INCR(pPager->nHit);
    return SQLITE_OK;

  }else{
    /* The pager cache has created a new page. Its content needs to 
    ** be initialized.  */

    PAGER_INCR(pPager->nMiss);
    pPg = *ppPage;
    pPg->pPager = pPager;

    /* The maximum page number is 2^31. Return SQLITE_CORRUPT if a page
    ** number greater than this, or the unused locking-page, is requested. */
    if( pgno>PAGER_MAX_PGNO || pgno==PAGER_MJ_PGNO(pPager) ){
      rc = SQLITE_CORRUPT_BKPT;

        testcase( rc==SQLITE_NOMEM );
        sqlite3EndBenignMalloc();
      }
      memset(pPg->pData, 0, pPager->pageSize);
      IOTRACE(("ZERO %p %d\n", pPager, pgno));
    }else{
      assert( pPg->pPager==pPager );

      rc = readDbPage(pPg);
      if( rc!=SQLITE_OK ){
        goto pager_acquire_err;
      }
    }
    pager_set_pagehash(pPg);
  }

  a[7] = pPager->nMiss;
  a[8] = 0;  /* Used to be pPager->nOvfl */
  a[9] = pPager->nRead;
  a[10] = pPager->nWrite;
  return a;
}
#endif


























/*
** Return true if this is an in-memory pager.
*/
int sqlite3PagerIsMemdb(Pager *pPager){
  return MEMDB;
}

const char *sqlite3PagerFilename(Pager*);
const sqlite3_vfs *sqlite3PagerVfs(Pager*);
sqlite3_file *sqlite3PagerFile(Pager*);
const char *sqlite3PagerJournalname(Pager*);
int sqlite3PagerNosync(Pager*);
void *sqlite3PagerTempSpace(Pager*);
int sqlite3PagerIsMemdb(Pager*);


/* Functions used to truncate the database file. */
void sqlite3PagerTruncateImage(Pager*,Pgno);

#if defined(SQLITE_HAS_CODEC) && !defined(SQLITE_OMIT_WAL)
void *sqlite3PagerCodec(DbPage *);
#endif

#include "sqliteInt.h"

typedef struct PCache1 PCache1;
typedef struct PgHdr1 PgHdr1;
typedef struct PgFreeslot PgFreeslot;
typedef struct PGroup PGroup;

typedef struct PGroupBlock PGroupBlock;
typedef struct PGroupBlockList PGroupBlockList;

/* Each page cache (or PCache) belongs to a PGroup.  A PGroup is a set 
** of one or more PCaches that are able to recycle each others unpinned
** pages when they are under memory pressure.  A PGroup is an instance of
** the following object.
**
** This page cache implementation works in one of two modes:

struct PGroup {
  sqlite3_mutex *mutex;          /* MUTEX_STATIC_LRU or NULL */
  int nMaxPage;                  /* Sum of nMax for purgeable caches */
  int nMinPage;                  /* Sum of nMin for purgeable caches */
  int mxPinned;                  /* nMaxpage + 10 - nMinPage */
  int nCurrentPage;              /* Number of purgeable pages allocated */
  PgHdr1 *pLruHead, *pLruTail;   /* LRU list of unpinned pages */
#ifdef SQLITE_PAGECACHE_BLOCKALLOC
  int isBusy;                    /* Do not run ReleaseMemory() if true */
  PGroupBlockList *pBlockList;   /* List of block-lists for this group */
#endif
};

/*
** If SQLITE_PAGECACHE_BLOCKALLOC is defined when the library is built,
** each PGroup structure has a linked list of the the following starting
** at PGroup.pBlockList. There is one entry for each distinct page-size 
** currently used by members of the PGroup (i.e. 1024 bytes, 4096 bytes
** etc.). Variable PGroupBlockList.nByte is set to the actual allocation
** size requested by each pcache, which is the database page-size plus
** the various header structures used by the pcache, pager and btree layers.
** Usually around (pgsz+200) bytes.
**
** This size (pgsz+200) bytes is not allocated efficiently by some
** implementations of malloc. In particular, some implementations are only
** able to allocate blocks of memory chunks of 2^N bytes, where N is some
** integer value. Since the page-size is a power of 2, this means we
** end up wasting (pgsz-200) bytes in each allocation.
**
** If SQLITE_PAGECACHE_BLOCKALLOC is defined, the (pgsz+200) byte blocks
** are not allocated directly. Instead, blocks of roughly M*(pgsz+200) bytes 
** are requested from malloc allocator. After a block is returned,
** sqlite3MallocSize() is used to determine how many (pgsz+200) byte
** allocations can fit in the space returned by malloc(). This value may
** be more than M.
**
** The blocks are stored in a doubly-linked list. Variable PGroupBlock.nEntry
** contains the number of allocations that will fit in the aData[] space.
** nEntry is limited to the number of bits in bitmask mUsed. If a slot
** within aData is in use, the corresponding bit in mUsed is set. Thus
** when (mUsed+1==(1 << nEntry)) the block is completely full.
**
** Each time a slot within a block is freed, the block is moved to the start
** of the linked-list. And if a block becomes completely full, then it is
** moved to the end of the list. As a result, when searching for a free
** slot, only the first block in the list need be examined. If it is full,
** then it is guaranteed that all blocks are full.
*/
struct PGroupBlockList {
  int nByte;                     /* Size of each allocation in bytes */
  PGroupBlock *pFirst;           /* First PGroupBlock in list */
  PGroupBlock *pLast;            /* Last PGroupBlock in list */
  PGroupBlockList *pNext;        /* Next block-list attached to group */
};

struct PGroupBlock {
  Bitmask mUsed;                 /* Mask of used slots */
  int nEntry;                    /* Maximum number of allocations in aData[] */
  u8 *aData;                     /* Pointer to data block */
  PGroupBlock *pNext;            /* Next PGroupBlock in list */
  PGroupBlock *pPrev;            /* Previous PGroupBlock in list */
  PGroupBlockList *pList;        /* Owner list */
};

/* Minimum value for PGroupBlock.nEntry */
#define PAGECACHE_BLOCKALLOC_MINENTRY 15

/* Each page cache is an instance of the following object.  Every
** open database file (including each in-memory database and each
** temporary or transient database) has a single page cache which
** is an instance of this object.
**
** Pointers to structures of this type are cast and returned as 

** a pointer to a block of szPage bytes of data and the return value is
** a pointer to the associated PgHdr1 structure.
**
**   assert( PGHDR1_TO_PAGE(PAGE_TO_PGHDR1(pCache, X))==X );
*/
#define PGHDR1_TO_PAGE(p)    (void*)(((char*)p) - p->pCache->szPage)
#define PAGE_TO_PGHDR1(c, p) (PgHdr1*)(((char*)p) + c->szPage)

/*
** Blocks used by the SQLITE_PAGECACHE_BLOCKALLOC blocks to store/retrieve 
** a PGroupBlock pointer based on a pointer to a page buffer. 
*/
#define PAGE_SET_BLOCKPTR(pCache, pPg, pBlock) \
  ( *(PGroupBlock **)&(((u8*)pPg)[sizeof(PgHdr1) + pCache->szPage]) = pBlock )

#define PAGE_GET_BLOCKPTR(pCache, pPg) \
  ( *(PGroupBlock **)&(((u8*)pPg)[sizeof(PgHdr1) + pCache->szPage]) )


/*
** Macros to enter and leave the PCache LRU mutex.
*/
#define pcache1EnterMutex(X) sqlite3_mutex_enter((X)->mutex)
#define pcache1LeaveMutex(X) sqlite3_mutex_leave((X)->mutex)

    iSize = sqlite3MallocSize(p);
    sqlite3MemdebugSetType(p, MEMTYPE_PCACHE);
    return iSize;
  }
}
#endif /* SQLITE_ENABLE_MEMORY_MANAGEMENT */

#ifdef SQLITE_PAGECACHE_BLOCKALLOC
/*
** The block pBlock belongs to list pList but is not currently linked in.
** Insert it into the start of the list.
*/
static void addBlockToList(PGroupBlockList *pList, PGroupBlock *pBlock){
  pBlock->pPrev = 0;
  pBlock->pNext = pList->pFirst;
  pList->pFirst = pBlock;
  if( pBlock->pNext ){
    pBlock->pNext->pPrev = pBlock;
  }else{
    assert( pList->pLast==0 );
    pList->pLast = pBlock;
  }
}

/*
** If there are no blocks in the list headed by pList, remove pList
** from the pGroup->pBlockList list and free it with sqlite3_free().
*/
static void freeListIfEmpty(PGroup *pGroup, PGroupBlockList *pList){
  assert( sqlite3_mutex_held(pGroup->mutex) );
  if( pList->pFirst==0 ){
    PGroupBlockList **pp;
    for(pp=&pGroup->pBlockList; *pp!=pList; pp=&(*pp)->pNext);
    *pp = (*pp)->pNext;
    sqlite3_free(pList);
  }
}
#endif /* SQLITE_PAGECACHE_BLOCKALLOC */

/*
** Allocate a new page object initially associated with cache pCache.
*/
static PgHdr1 *pcache1AllocPage(PCache1 *pCache){
  int nByte = sizeof(PgHdr1) + pCache->szPage;
  void *pPg = 0;
  PgHdr1 *p;

#ifdef SQLITE_PAGECACHE_BLOCKALLOC
  PGroup *pGroup = pCache->pGroup;
  PGroupBlockList *pList;
  PGroupBlock *pBlock;
  int i;

  nByte += sizeof(PGroupBlockList *);
  nByte = ROUND8(nByte);

  for(pList=pGroup->pBlockList; pList; pList=pList->pNext){
    if( pList->nByte==nByte ) break;
  }
  if( pList==0 ){
    PGroupBlockList *pNew;
    assert( pGroup->isBusy==0 );
    assert( sqlite3_mutex_held(pGroup->mutex) );
    pGroup->isBusy = 1;  /* Disable sqlite3PcacheReleaseMemory() */
    pNew = (PGroupBlockList *)sqlite3MallocZero(sizeof(PGroupBlockList));
    pGroup->isBusy = 0;  /* Reenable sqlite3PcacheReleaseMemory() */
    if( pNew==0 ){
      /* malloc() failure. Return early. */
      return 0;
    }
#ifdef SQLITE_DEBUG
    for(pList=pGroup->pBlockList; pList; pList=pList->pNext){
      assert( pList->nByte!=nByte );
    }
#endif
    pNew->nByte = nByte;
    pNew->pNext = pGroup->pBlockList;
    pGroup->pBlockList = pNew;
    pList = pNew;
  }

  pBlock = pList->pFirst;
  if( pBlock==0 || pBlock->mUsed==(((Bitmask)1<<pBlock->nEntry)-1) ){
    int sz;

    /* Allocate a new block. Try to allocate enough space for the PGroupBlock
    ** structure and MINENTRY allocations of nByte bytes each. If the 
    ** allocator returns more memory than requested, then more than MINENTRY 
    ** allocations may fit in it. */
    assert( sqlite3_mutex_held(pGroup->mutex) );
    pcache1LeaveMutex(pCache->pGroup);
    sz = sizeof(PGroupBlock) + PAGECACHE_BLOCKALLOC_MINENTRY * nByte;
    pBlock = (PGroupBlock *)sqlite3Malloc(sz);
    pcache1EnterMutex(pCache->pGroup);

    if( !pBlock ){
      freeListIfEmpty(pGroup, pList);
      return 0;
    }
    pBlock->nEntry = (sqlite3MallocSize(pBlock) - sizeof(PGroupBlock)) / nByte;
    if( pBlock->nEntry>=BMS ){
      pBlock->nEntry = BMS-1;
    }
    pBlock->pList = pList;
    pBlock->mUsed = 0;
    pBlock->aData = (u8 *)&pBlock[1];
    addBlockToList(pList, pBlock);

    sz = sqlite3MallocSize(pBlock);
    sqlite3_mutex_enter(pcache1.mutex);
    sqlite3StatusAdd(SQLITE_STATUS_PAGECACHE_OVERFLOW, sz);
    sqlite3_mutex_leave(pcache1.mutex);
  }

  for(i=0; pPg==0 && ALWAYS(i<pBlock->nEntry); i++){
    if( 0==(pBlock->mUsed & ((Bitmask)1<<i)) ){
      pBlock->mUsed |= ((Bitmask)1<<i);
      pPg = (void *)&pBlock->aData[pList->nByte * i];
    }
  }
  assert( pPg );
  PAGE_SET_BLOCKPTR(pCache, pPg, pBlock);

  /* If the block is now full, shift it to the end of the list */
  if( pBlock->mUsed==(((Bitmask)1<<pBlock->nEntry)-1) && pList->pLast!=pBlock ){
    assert( pList->pFirst==pBlock );
    assert( pBlock->pPrev==0 );
    assert( pList->pLast->pNext==0 );
    pList->pFirst = pBlock->pNext;
    pList->pFirst->pPrev = 0;
    pBlock->pPrev = pList->pLast;
    pBlock->pNext = 0;
    pList->pLast->pNext = pBlock;
    pList->pLast = pBlock;
  }
  p = PAGE_TO_PGHDR1(pCache, pPg);
  if( pCache->bPurgeable ){
    pCache->pGroup->nCurrentPage++;
  }
#else
  /* The group mutex must be released before pcache1Alloc() is called. This
  ** is because it may call sqlite3_release_memory(), which assumes that 
  ** this mutex is not held. */
  assert( sqlite3_mutex_held(pCache->pGroup->mutex) );
  pcache1LeaveMutex(pCache->pGroup);
  pPg = pcache1Alloc(nByte);
  pcache1EnterMutex(pCache->pGroup);

  if( pPg ){
    p = PAGE_TO_PGHDR1(pCache, pPg);
    if( pCache->bPurgeable ){
      pCache->pGroup->nCurrentPage++;
    }
  }else{
    p = 0;
  }
#endif
  return p;
}

/*
** Free a page object allocated by pcache1AllocPage().
**
** The pointer is allowed to be NULL, which is prudent.  But it turns out
** that the current implementation happens to never call this routine
** with a NULL pointer, so we mark the NULL test with ALWAYS().
*/
static void pcache1FreePage(PgHdr1 *p){
  if( ALWAYS(p) ){
    PCache1 *pCache = p->pCache;
    void *pPg = PGHDR1_TO_PAGE(p);

#ifdef SQLITE_PAGECACHE_BLOCKALLOC
    PGroupBlock *pBlock = PAGE_GET_BLOCKPTR(pCache, pPg);
    PGroupBlockList *pList = pBlock->pList;
    int i = ((u8 *)pPg - pBlock->aData) / pList->nByte;

    assert( pPg==(void *)&pBlock->aData[i*pList->nByte] );
    assert( pBlock->mUsed & ((Bitmask)1<<i) );
    pBlock->mUsed &= ~((Bitmask)1<<i);

    /* Remove the block from the list. If it is completely empty, free it.
    ** Or if it is not completely empty, re-insert it at the start of the
    ** list. */
    if( pList->pFirst==pBlock ){
      pList->pFirst = pBlock->pNext;
      if( pList->pFirst ) pList->pFirst->pPrev = 0;
    }else{
      pBlock->pPrev->pNext = pBlock->pNext;
    }
    if( pList->pLast==pBlock ){
      pList->pLast = pBlock->pPrev;
      if( pList->pLast ) pList->pLast->pNext = 0;
    }else{
      pBlock->pNext->pPrev = pBlock->pPrev;
    }

    if( pBlock->mUsed==0 ){
      PGroup *pGroup = p->pCache->pGroup;

      int sz = sqlite3MallocSize(pBlock);
      sqlite3_mutex_enter(pcache1.mutex);
      sqlite3StatusAdd(SQLITE_STATUS_PAGECACHE_OVERFLOW, -sz);
      sqlite3_mutex_leave(pcache1.mutex);
      freeListIfEmpty(pGroup, pList);
      sqlite3_free(pBlock);
    }else{
      addBlockToList(pList, pBlock);
    }
#else
    assert( sqlite3_mutex_held(p->pCache->pGroup->mutex) );
    pcache1Free(pPg);
#endif
    if( pCache->bPurgeable ){
      pCache->pGroup->nCurrentPage--;
    }
  }
}

/*

**
** nReq is the number of bytes of memory required. Once this much has
** been released, the function returns. The return value is the total number 
** of bytes of memory released.
*/
int sqlite3PcacheReleaseMemory(int nReq){
  int nFree = 0;
#ifdef SQLITE_PAGECACHE_BLOCKALLOC
  if( pcache1.grp.isBusy ) return 0;
#endif
  assert( sqlite3_mutex_notheld(pcache1.grp.mutex) );
  assert( sqlite3_mutex_notheld(pcache1.mutex) );
  if( pcache1.pStart==0 ){
    PgHdr1 *p;
    pcache1EnterMutex(&pcache1.grp);
    while( (nReq<0 || nFree<nReq) && ((p=pcache1.grp.pLruTail)!=0) ){
      nFree += pcache1MemSize(PGHDR1_TO_PAGE(p));

**
** [[SQLITE_DBSTATUS_STMT_USED]] ^(<dt>SQLITE_DBSTATUS_STMT_USED</dt>
** <dd>This parameter returns the approximate number of of bytes of heap
** and lookaside memory used by all prepared statements associated with
** the database connection.)^
** ^The highwater mark associated with SQLITE_DBSTATUS_STMT_USED is always 0.
** </dd>












** </dl>
*/
#define SQLITE_DBSTATUS_LOOKASIDE_USED       0
#define SQLITE_DBSTATUS_CACHE_USED           1
#define SQLITE_DBSTATUS_SCHEMA_USED          2
#define SQLITE_DBSTATUS_STMT_USED            3
#define SQLITE_DBSTATUS_LOOKASIDE_HIT        4
#define SQLITE_DBSTATUS_LOOKASIDE_MISS_SIZE  5
#define SQLITE_DBSTATUS_LOOKASIDE_MISS_FULL  6


#define SQLITE_DBSTATUS_MAX                  6   /* Largest defined DBSTATUS */


/*
** CAPI3REF: Prepared Statement Status
**
** ^(Each prepared statement maintains various
** [SQLITE_STMTSTATUS counters] that measure the number

**
** [[SQLITE_STMTSTATUS_AUTOINDEX]] <dt>SQLITE_STMTSTATUS_AUTOINDEX</dt>
** <dd>^This is the number of rows inserted into transient indices that
** were created automatically in order to help joins run faster.
** A non-zero value in this counter may indicate an opportunity to
** improvement performance by adding permanent indices that do not
** need to be reinitialized each time the statement is run.</dd>
**
** </dl>
*/
#define SQLITE_STMTSTATUS_FULLSCAN_STEP     1
#define SQLITE_STMTSTATUS_SORT              2
#define SQLITE_STMTSTATUS_AUTOINDEX         3

/*

      db->pnBytesFreed = 0;

      *pHighwater = 0;
      *pCurrent = nByte;

      break;
    }























    default: {
      rc = SQLITE_ERROR;
    }
  }
  sqlite3_mutex_leave(db->mutex);
  return rc;

/*
** If the macro TCLSH is one, then put in code this for the
** "main" routine that will initialize Tcl and take input from
** standard input, or if a file is named on the command line
** the TCL interpreter reads and evaluates that file.
*/
#if TCLSH==1

static char zMainloop[] =
  "set line {}\n"
  "while {![eof stdin]} {\n"
    "if {$line!=\"\"} {\n"
      "puts -nonewline \"> \"\n"
    "} else {\n"
      "puts -nonewline \"% \"\n"
    "}\n"
    "flush stdout\n"
    "append line [gets stdin]\n"
    "if {[info complete $line]} {\n"
      "if {[catch {uplevel #0 $line} result]} {\n"
        "puts stderr \"Error: $result\"\n"
      "} elseif {$result!=\"\"} {\n"
        "puts $result\n"
      "}\n"
      "set line {}\n"
    "} else {\n"
      "append line \\n\n"
    "}\n"
  "}\n"
;


#endif
#if TCLSH==2
static char zMainloop[] = 
#include "spaceanal_tcl.h"
;
#endif

#ifdef SQLITE_TEST
static void init_all(Tcl_Interp *);
static int init_all_cmd(
  ClientData cd,
  Tcl_Interp *interp,

*/
static void init_all(Tcl_Interp *interp){
  Sqlite3_Init(interp);

#if defined(SQLITE_TEST) || defined(SQLITE_TCLMD5)
  Md5_Init(interp);
#endif












#ifdef SQLITE_TEST
  {
    extern int Sqliteconfig_Init(Tcl_Interp*);
    extern int Sqlitetest1_Init(Tcl_Interp*);
    extern int Sqlitetest2_Init(Tcl_Interp*);
    extern int Sqlitetest3_Init(Tcl_Interp*);

    extern int Sqlitetesttclvar_Init(Tcl_Interp*);
    extern int SqlitetestThread_Init(Tcl_Interp*);
    extern int SqlitetestOnefile_Init();
    extern int SqlitetestOsinst_Init(Tcl_Interp*);
    extern int Sqlitetestbackup_Init(Tcl_Interp*);
    extern int Sqlitetestintarray_Init(Tcl_Interp*);
    extern int Sqlitetestvfs_Init(Tcl_Interp *);
    extern int SqlitetestStat_Init(Tcl_Interp*);
    extern int Sqlitetestrtree_Init(Tcl_Interp*);
    extern int Sqlitequota_Init(Tcl_Interp*);
    extern int Sqlitemultiplex_Init(Tcl_Interp*);
    extern int SqliteSuperlock_Init(Tcl_Interp*);
    extern int SqlitetestSyscall_Init(Tcl_Interp*);
    extern int Sqlitetestfuzzer_Init(Tcl_Interp*);
    extern int Sqlitetestwholenumber_Init(Tcl_Interp*);

    Sqlitetesttclvar_Init(interp);
    SqlitetestThread_Init(interp);
    SqlitetestOnefile_Init(interp);
    SqlitetestOsinst_Init(interp);
    Sqlitetestbackup_Init(interp);
    Sqlitetestintarray_Init(interp);
    Sqlitetestvfs_Init(interp);
    SqlitetestStat_Init(interp);
    Sqlitetestrtree_Init(interp);
    Sqlitequota_Init(interp);
    Sqlitemultiplex_Init(interp);
    SqliteSuperlock_Init(interp);
    SqlitetestSyscall_Init(interp);
    Sqlitetestfuzzer_Init(interp);
    Sqlitetestwholenumber_Init(interp);

  Tcl_Interp *interp;
  
  /* Call sqlite3_shutdown() once before doing anything else. This is to
  ** test that sqlite3_shutdown() can be safely called by a process before
  ** sqlite3_initialize() is. */
  sqlite3_shutdown();




#if TCLSH==2
  sqlite3_config(SQLITE_CONFIG_SINGLETHREAD);
#endif
  Tcl_FindExecutable(argv[0]);

  interp = Tcl_CreateInterp();
  init_all(interp);
  if( argc>=2 ){
    int i;
    char zArgc[32];
    sqlite3_snprintf(sizeof(zArgc), zArgc, "%d", argc-(3-TCLSH));
    Tcl_SetVar(interp,"argc", zArgc, TCL_GLOBAL_ONLY);
    Tcl_SetVar(interp,"argv0",argv[1],TCL_GLOBAL_ONLY);
    Tcl_SetVar(interp,"argv", "", TCL_GLOBAL_ONLY);
    for(i=3-TCLSH; i<argc; i++){
      Tcl_SetVar(interp, "argv", argv[i],
          TCL_GLOBAL_ONLY | TCL_LIST_ELEMENT | TCL_APPEND_VALUE);
    }
    if( TCLSH==1 && Tcl_EvalFile(interp, argv[1])!=TCL_OK ){
      const char *zInfo = Tcl_GetVar(interp, "errorInfo", TCL_GLOBAL_ONLY);
      if( zInfo==0 ) zInfo = Tcl_GetStringResult(interp);
      fprintf(stderr,"%s: %s\n", *argv, zInfo);
      return 1;
    }
  }
  if( TCLSH==2 || argc<=1 ){
    Tcl_GlobalEval(interp, zMainloop);
  }
  return 0;
}
#endif /* TCLSH */

#ifdef YYTRACKMAXSTACKDEPTH
  Tcl_SetVar2(interp, "sqlite_options", "yytrackmaxstackdepth", "1", TCL_GLOBAL_ONLY);
#else
  Tcl_SetVar2(interp, "sqlite_options", "yytrackmaxstackdepth", "0", TCL_GLOBAL_ONLY);
#endif

#ifdef SQLITE_PAGECACHE_BLOCKALLOC
  Tcl_SetVar2(interp, "sqlite_options", "blockalloc", "1", TCL_GLOBAL_ONLY);
#else
  Tcl_SetVar2(interp, "sqlite_options", "blockalloc", "0", TCL_GLOBAL_ONLY);
#endif

#define LINKVAR(x) { \
    static const int cv_ ## x = SQLITE_ ## x; \
    Tcl_LinkVar(interp, "SQLITE_" #x, (char *)&(cv_ ## x), \
                TCL_LINK_INT | TCL_LINK_READ_ONLY); }

  LINKVAR( MAX_LENGTH );
  LINKVAR( MAX_COLUMN );

  } aOp[] = {
    { "LOOKASIDE_USED",      SQLITE_DBSTATUS_LOOKASIDE_USED      },
    { "CACHE_USED",          SQLITE_DBSTATUS_CACHE_USED          },
    { "SCHEMA_USED",         SQLITE_DBSTATUS_SCHEMA_USED         },
    { "STMT_USED",           SQLITE_DBSTATUS_STMT_USED           },
    { "LOOKASIDE_HIT",       SQLITE_DBSTATUS_LOOKASIDE_HIT       },
    { "LOOKASIDE_MISS_SIZE", SQLITE_DBSTATUS_LOOKASIDE_MISS_SIZE },
    { "LOOKASIDE_MISS_FULL", SQLITE_DBSTATUS_LOOKASIDE_MISS_FULL }


  };
  Tcl_Obj *pResult;
  if( objc!=4 ){
    Tcl_WrongNumArgs(interp, 1, objv, "PARAMETER RESETFLAG");
    return TCL_ERROR;
  }
  if( getDbPointer(interp, Tcl_GetString(objv[1]), &db) ) return TCL_ERROR;
  zOpName = Tcl_GetString(objv[2]);
  if( memcmp(zOpName, "SQLITE_", 7)==0 ) zOpName += 7;
  if( memcmp(zOpName, "DBSTATUS_", 9)==0 ) zOpName += 9;
  for(i=0; i<ArraySize(aOp); i++){

**
** The dbstat virtual table is used to extract low-level formatting
** information from an SQLite database in order to implement the
** "sqlite3_analyzer" utility.  See the ../tool/spaceanal.tcl script
** for an example implementation.
*/


#include "sqliteInt.h"


#ifndef SQLITE_OMIT_VIRTUALTABLE

/*
** Page paths:
** 
**   The value of the 'path' column describes the path taken from the 

  };
  sqlite3_create_module(db, "dbstat", &dbstat_module, 0);
  return SQLITE_OK;
}

#endif

#ifdef SQLITE_TEST
#include <tcl.h>

static int test_dbstat(
  void *clientData,
  Tcl_Interp *interp,
  int objc,
  Tcl_Obj *CONST objv[]

#endif
}

int SqlitetestStat_Init(Tcl_Interp *interp){
  Tcl_CreateObjCommand(interp, "register_dbstat_vtab", test_dbstat, 0, 0);
  return TCL_OK;
}
#endif

#
# This file implements tests to make sure SQLite does not crash or
# segfault if it sees a corrupt database file.  It specifcally
# focuses on rowid order corruption.
#
# $Id: corruptE.test,v 1.14 2009/07/11 06:55:34 danielk1977 Exp $

catch {forcedelete test.db test.db-journal test.bu}

set testdir [file dirname $argv0]
source $testdir/tester.tcl

# Do not use a codec for tests in this file, as the database file is
# manipulated directly using tcl scripts (using the [hexio_write] command).
#
do_not_use_codec

# test 1 before array bounds (N=-1)
do_test ctime-2.5.$tc {
  set N -1
  set ans [ catchsql {
    SELECT sqlite_compileoption_get($N);
  } ]
} {0 {{}}}

ifcapable blockalloc {
  do_test ctime-3.1a {
    db eval {SELECT sqlite_compileoption_used('PAGECACHE_BLOCKALLOC')}
  } {1}
} else {
  do_test ctime-3.1b {
    db eval {SELECT sqlite_compileoption_used('PAGECACHE_BLOCKALLOC')}
  } {0}
}



finish_test

    DELETE FROM t1;
    SELECT count(*) FROM t1;
  }
} 0

# Test that auto-vacuum works with in-memory databases.
# 
ifcapable autovacuum&&!blockalloc {
  do_test memdb-9.1 {
    db close
    sqlite3 db test.db
    db cache size 0
    execsql {
      PRAGMA auto_vacuum = full;
      CREATE TABLE t1(a);

# will not work with the "memsubsys1" permutation.
#
if {[permutation] == "memsubsys1"} {
  finish_test
  return
}

# Nor will it work if the pager is allocating memory in blocks.
#
ifcapable blockalloc {
  finish_test
  return
}

# This procedure constructs a new database in test.db.  It fills
# this database with many small records (enough to force multiple
# rebalance operations in the btree-layer and to require a large
# page cache), verifies correct results, then returns.
#
proc build_test_db {testname pragmas} {
  catch {db close}

# This file is focused on testing the pcache module.
#
# $Id: pcache2.test,v 1.5 2009/07/18 14:36:24 danielk1977 Exp $

set testdir [file dirname $argv0]
source $testdir/tester.tcl

# If compiled with blockalloc, pagecache memory is not used. Which
# causes these tests to fail.
#
ifcapable blockalloc {
  finish_test
  return
}

# Set up a pcache memory pool so that we can easily track how many
# pages are being used for cache.
#
do_test pcache2-1.1 {
  db close
  sqlite3_reset_auto_extension
  sqlite3_shutdown

# Open the database
#
sqlite3 db $file_to_analyze
register_dbstat_vtab db

set pageSize [db one {PRAGMA page_size}]

#set DB [btree_open $file_to_analyze 1000 0]

# In-memory database for collecting statistics. This script loops through
# the tables and indices in the database being analyzed, adding a row for each
# to an in-memory database (for which the schema is shown below). It then
# queries the in-memory db to produce the space-analysis report.
#
sqlite3 mem :memory:

   ovfl_unused int,  -- Number of unused bytes on overflow pages
   gap_cnt int       -- Number of gaps in the page layout
);}
mem eval $tabledef

# Create a temporary "dbstat" virtual table.
#
db eval { 
  CREATE VIRTUAL TABLE temp.stat USING dbstat;
  CREATE TEMP TABLE dbstat AS SELECT * FROM temp.stat ORDER BY name, path;

  DROP TABLE temp.stat;
}

proc isleaf {pagetype is_index} {
  return [expr {$pagetype == "leaf" || ($pagetype == "internal" && $is_index)}]
}
proc isoverflow {pagetype is_index} {
  return [expr {$pagetype == "overflow"}]
}