/ Artifact Content
Login

Artifact aa45339b4afa435dde5d88e71a95459cc221a3f4:


# 2010 April 19
#
# The author disclaims copyright to this source code.  In place of
# a legal notice, here is a blessing:
#
#    May you do good and not evil.
#    May you find forgiveness for yourself and forgive others.
#    May you share freely, never taking more than you give.
#
#***********************************************************************
# This file implements regression tests for SQLite library.  The
# focus of this file is testing the operation of the library in
# "PRAGMA journal_mode=WAL" mode.
#

set testdir [file dirname $argv0]
source $testdir/tester.tcl
source $testdir/malloc_common.tcl

# If the library was compiled without WAL support, check that the 
# "PRAGMA journal_mode=WAL" treats "WAL" as an unrecognized mode.
#
ifcapable !wal {

  do_test walmode-0.1 {
    execsql { PRAGMA journal_mode = wal }
  } {delete}
  do_test walmode-0.2 {
    execsql { PRAGMA main.journal_mode = wal }
  } {delete}
  do_test walmode-0.3 {
    execsql { PRAGMA main.journal_mode }
  } {delete}

  finish_test
  return
}
if { ![wal_is_ok] && ![path_is_dos "."]} {
  do_test walmode-0.1 {
    execsql { PRAGMA journal_mode = wal }
  } {delete}
  do_test walmode-0.2 {
    execsql { PRAGMA main.journal_mode = wal }
  } {delete}
  do_test walmode-0.3 {
    execsql { PRAGMA main.journal_mode }
  } {delete}

  finish_test
  return
}

do_test walmode-1.1 {
  set sqlite_sync_count 0
  execsql { PRAGMA page_size = 1024 }
  execsql { PRAGMA journal_mode = wal }
} {wal}
do_test walmode-1.2 {
  file size test.db
} {1024}

# Determine how many sync() calls to expect from the "journal_mode=WAL" 
# command above. Note that if DEFAULT_WAL_SAFETYLEVEL is defined, the
# safety-level may have been modified while compiling the "journal_mode=WAL"
# statement.
switch -- [db eval {PRAGMA main.synchronous}] {
  0        { set expected_sync_count 0 }
  1        { set expected_sync_count 2 }
  default  { set expected_sync_count 3 }
}
if {$::tcl_platform(platform)!="windows"} {
  ifcapable dirsync {
    incr expected_sync_count
  }
}
do_test walmode-1.3 {
  set sqlite_sync_count
} $expected_sync_count

do_test walmode-1.4 {
  file exists test.db-wal
} {0}
do_test walmode-1.5 {
  execsql { CREATE TABLE t1(a, b) }
  file size test.db
} {1024}
do_test walmode-1.6 {
  file exists test.db-wal
} {1}
do_test walmode-1.7 {
  ifcapable enable_persist_wal {
    file_control_persist_wal db 0
  }
  db close
  file exists test.db-wal
} {0}

# There is now a database file with the read and write versions set to 2
# in the file system. This file should default to WAL mode.
#
do_test walmode-2.1 {
  sqlite3 db test.db
  file exists test.db-wal
} {0}
do_test walmode-2.2 {
  execsql { SELECT * FROM sqlite_master }
  file exists test.db-wal
} {1}
do_test walmode-2.3 {
  ifcapable enable_persist_wal {
    file_control_persist_wal db 0
  }
  db close
  file exists test.db-wal
} {0}

# If the first statement executed is "PRAGMA journal_mode = wal", and
# the file is already configured for WAL (read and write versions set
# to 2), then there should be no need to write the database. The 
# statement should cause the client to connect to the log file.
#
set sqlite_sync_count 0
do_test walmode-3.1 {
  sqlite3 db test.db
  execsql { PRAGMA journal_mode = wal }
} {wal}
do_test walmode-3.2 {
  list $sqlite_sync_count [file exists test.db-wal] [file size test.db-wal]
} {0 1 0}

# Test that changing back to journal_mode=persist works.
#
do_test walmode-4.1 {
  execsql { INSERT INTO t1 VALUES(1, 2) }
  ifcapable enable_persist_wal {
    file_control_persist_wal db 0
  }
  execsql { PRAGMA journal_mode = persist }
} {persist}
do_test walmode-4.2 {
  list [file exists test.db-journal] [file exists test.db-wal]
} {1 0}
do_test walmode-4.3 {
  execsql { SELECT * FROM t1 }
} {1 2}
do_test walmode-4.4 {
  db close
  sqlite3 db test.db
  execsql { SELECT * FROM t1 }
} {1 2}
do_test walmode-4.5 {
  list [file exists test.db-journal] [file exists test.db-wal]
} {1 0}

# Test that nothing goes wrong if a connection is prevented from changing
# from WAL to rollback mode because a second connection has the database
# open. Or from rollback to WAL.
#
do_test walmode-4.6 {
  sqlite3 db2 test.db
  ifcapable enable_persist_wal {
    file_control_persist_wal db2 0
  }
  execsql { PRAGMA main.journal_mode } db2
} {delete}
do_test walmode-4.7 {
  execsql { PRAGMA main.journal_mode = wal } db
} {wal}
do_test walmode-4.8 {
  execsql { SELECT * FROM t1 } db2
} {1 2}
do_test walmode-4.9 {
  catchsql { PRAGMA journal_mode = delete } db
} {1 {database is locked}}
do_test walmode-4.10 {
  execsql { PRAGMA main.journal_mode } db
} {wal}

do_test walmode-4.11 {
  db2 close
  ifcapable enable_persist_wal {
    file_control_persist_wal db 0
  }
  execsql { PRAGMA journal_mode = delete } db
} {delete}
do_test walmode-4.12 {
  execsql { PRAGMA main.journal_mode } db
} {delete}
do_test walmode-4.13 {
  list [file exists test.db-journal] [file exists test.db-wal]
} {0 0}
do_test walmode-4.14 {
  sqlite3 db2 test.db
  execsql {
    BEGIN;
      SELECT * FROM t1;
  } db2
} {1 2}

do_test walmode-4.16 { execsql { PRAGMA main.journal_mode } db  } {delete}
do_test walmode-4.17 { execsql { PRAGMA main.journal_mode } db2 } {delete}

do_test walmode-4.17 {
  catchsql { PRAGMA main.journal_mode = wal } db
} {1 {database is locked}}
do_test walmode-4.18 {
  execsql { PRAGMA main.journal_mode } db
} {delete}
catch { db close }
catch { db2 close }

# Test that it is not possible to change a temporary or in-memory database
# to WAL mode. WAL mode is for persistent file-backed databases only.
#
#   walmode-5.1.*: Try to set journal_mode=WAL on [sqlite3 db :memory:] database.
#   walmode-5.2.*: Try to set journal_mode=WAL on [sqlite3 db ""] database.
#   walmode-5.3.*: Try to set temp.journal_mode=WAL.
#
do_test walmode-5.1.1 {
  sqlite3 db :memory:
  execsql { PRAGMA main.journal_mode }
} {memory}
do_test walmode-5.1.2 {
  execsql { PRAGMA main.journal_mode = wal }
} {memory}
do_test walmode-5.1.3 {
  execsql {
    BEGIN;
      CREATE TABLE t1(a, b);
      INSERT INTO t1 VALUES(1, 2);
    COMMIT;
    SELECT * FROM t1;
    PRAGMA main.journal_mode;
  }
} {1 2 memory}
do_test walmode-5.1.4 {
  execsql { PRAGMA main.journal_mode = wal }
} {memory}
do_test walmode-5.1.5 {
  execsql { 
    INSERT INTO t1 VALUES(3, 4);
    SELECT * FROM t1;
    PRAGMA main.journal_mode;
  }
} {1 2 3 4 memory}

if {$TEMP_STORE>=2} {
  set tempJrnlMode memory
} else {
  set tempJrnlMode delete
}
do_test walmode-5.2.1 {
  sqlite3 db ""
  execsql { PRAGMA main.journal_mode }
} $tempJrnlMode
do_test walmode-5.2.2 {
  execsql { PRAGMA main.journal_mode = wal }
} $tempJrnlMode
do_test walmode-5.2.3 {
  execsql {
    BEGIN;
      CREATE TABLE t1(a, b);
      INSERT INTO t1 VALUES(1, 2);
    COMMIT;
    SELECT * FROM t1;
    PRAGMA main.journal_mode;
  }
} [list 1 2 $tempJrnlMode]
do_test walmode-5.2.4 {
  execsql { PRAGMA main.journal_mode = wal }
} $tempJrnlMode
do_test walmode-5.2.5 {
  execsql { 
    INSERT INTO t1 VALUES(3, 4);
    SELECT * FROM t1;
    PRAGMA main.journal_mode;
  }
} [list 1 2 3 4 $tempJrnlMode]

do_test walmode-5.3.1 {
  sqlite3 db test.db
  execsql { PRAGMA temp.journal_mode }
} $tempJrnlMode
do_test walmode-5.3.2 {
  execsql { PRAGMA temp.journal_mode = wal }
} $tempJrnlMode
do_test walmode-5.3.3 {
  execsql {
    BEGIN;
      CREATE TEMP TABLE t1(a, b);
      INSERT INTO t1 VALUES(1, 2);
    COMMIT;
    SELECT * FROM t1;
    PRAGMA temp.journal_mode;
  }
} [list 1 2 $tempJrnlMode]
do_test walmode-5.3.4 {
  execsql { PRAGMA temp.journal_mode = wal }
} $tempJrnlMode
do_test walmode-5.3.5 {
  execsql { 
    INSERT INTO t1 VALUES(3, 4);
    SELECT * FROM t1;
    PRAGMA temp.journal_mode;
  }
} [list 1 2 3 4 $tempJrnlMode]


#-------------------------------------------------------------------------
# Test changing to WAL mode from journal_mode=off or journal_mode=memory
#
foreach {tn mode} {
  1 off
  2 memory
  3 persist
  4 delete
  5 truncate
} {
  do_test walmode-6.$tn {
    faultsim_delete_and_reopen
    execsql "
      PRAGMA journal_mode = $mode;
      PRAGMA journal_mode = wal;
    "
  } [list $mode wal]
}
db close

#-------------------------------------------------------------------------
# Test the effect of a "PRAGMA journal_mode" command being the first 
# thing executed by a new connection. This means that the schema is not
# loaded when sqlite3_prepare_v2() is called to compile the statement.
#
do_test walmode-7.0 {
  forcedelete test.db
  sqlite3 db test.db
  ifcapable enable_persist_wal {
    file_control_persist_wal db 0
  }
  execsql {
    PRAGMA journal_mode = WAL;
    CREATE TABLE t1(a, b);
  }
} {wal}
foreach {tn sql result} {
  1  "PRAGMA journal_mode"                wal
  2  "PRAGMA main.journal_mode"           wal
  3  "PRAGMA journal_mode = delete"       delete
  4  "PRAGMA journal_mode"                delete
  5  "PRAGMA main.journal_mode"           delete
  6  "PRAGMA journal_mode = wal"          wal
  7  "PRAGMA journal_mode"                wal
  8  "PRAGMA main.journal_mode"           wal

  9  "PRAGMA journal_mode"                wal
 10  "PRAGMA main.journal_mode"           wal
 11  "PRAGMA main.journal_mode = delete"  delete
 12  "PRAGMA journal_mode"                delete
 13  "PRAGMA main.journal_mode"           delete
 14  "PRAGMA main.journal_mode = wal"     wal
 15  "PRAGMA journal_mode"                wal
 16  "PRAGMA main.journal_mode"           wal
} {
  do_test walmode-7.$tn { 
    db close
    sqlite3 db test.db
    execsql $sql
  } $result
}
db close

#-------------------------------------------------------------------------
# Test the effect of a "PRAGMA journal_mode" command on an attached 
# database.
#
faultsim_delete_and_reopen
do_execsql_test walmode-8.1 {
  CREATE TABLE t1(a, b);
  PRAGMA journal_mode = WAL;
  ATTACH 'test.db2' AS two;
  CREATE TABLE two.t2(a, b);
} {wal}
do_execsql_test walmode-8.2 { PRAGMA main.journal_mode }         {wal}
do_execsql_test walmode-8.3 { PRAGMA two.journal_mode  }         {delete}
do_execsql_test walmode-8.4 { PRAGMA two.journal_mode = DELETE } {delete}

db close
sqlite3 db test.db
do_execsql_test walmode-8.5  { ATTACH 'test.db2' AS two }          {}
do_execsql_test walmode-8.6  { PRAGMA main.journal_mode }          {wal}
do_execsql_test walmode-8.7  { PRAGMA two.journal_mode  }          {delete}
do_execsql_test walmode-8.8  { INSERT INTO two.t2 DEFAULT VALUES } {}
do_execsql_test walmode-8.9  { PRAGMA two.journal_mode  }          {delete}
do_execsql_test walmode-8.10 { INSERT INTO t1 DEFAULT VALUES } {}
do_execsql_test walmode-8.11 { PRAGMA main.journal_mode  }         {wal}
do_execsql_test walmode-8.12 { PRAGMA journal_mode  }              {wal}

# Change to WAL mode on test2.db and make sure (in the tests that follow)
# that this mode change persists. 
do_test walmode-8.x1 {
  execsql {
     PRAGMA two.journal_mode=WAL;
     PRAGMA two.journal_mode;
  }
} {wal wal}

db close
sqlite3 db test.db
do_execsql_test walmode-8.13 { PRAGMA journal_mode = WAL }         {wal}
do_execsql_test walmode-8.14 { ATTACH 'test.db2' AS two  }         {}
do_execsql_test walmode-8.15 { PRAGMA main.journal_mode  }         {wal}
do_execsql_test walmode-8.16 { PRAGMA two.journal_mode   }         {wal}
do_execsql_test walmode-8.17 { INSERT INTO two.t2 DEFAULT VALUES } {}
do_execsql_test walmode-8.18 { PRAGMA two.journal_mode   }         {wal}
 
sqlite3 db2 test.db2
do_test walmode-8.19 { execsql { PRAGMA main.journal_mode } db2 }  {wal}
db2 close

do_execsql_test walmode-8.20 { PRAGMA journal_mode = DELETE } {delete}
do_execsql_test walmode-8.21 { PRAGMA main.journal_mode }     {delete}
do_execsql_test walmode-8.22 { PRAGMA two.journal_mode }      {delete}
do_execsql_test walmode-8.21 { PRAGMA journal_mode = WAL }    {wal}
do_execsql_test walmode-8.21 { PRAGMA main.journal_mode }     {wal}
do_execsql_test walmode-8.22 { PRAGMA two.journal_mode }      {wal}

finish_test