<title>Why SQLite Does Not Use Git</title>

<table_of_contents>

<h1>Introduction</h1>

<p>
SQLite does not use the
[https://git-scm.org|Git] version control system.
SQLite uses
[https://fossil-scm.org/|Fossil] instead, which is a
version control system that was specifically designed
and written to support SQLite.

<p>
People sometimes ask why SQLite does not use the
[https://git-scm.org|Git] version control system like everybody
else.
This article attempts to answer that question.  Also,
in <a href="#getthecode">section 3</a>, 
this article provides hints to Git enthusiasts
as to how they can easily access the SQLite source code.

<h2>Revisions To This Article</h2>

<p>
Less than 24 hours after first publication, the original text
of this article was being
[https://news.ycombinator.com/item?id=16806114|hotly debated on Hacker News],
and was rebuked for inaccuracies, distortions, and
exaggerations.
The version you are now reading is a re-write that
attempts to correct those problems and to use a softer
and less confrontational tone.

<h1>A Few Reasons Why SQLite Does Not Use Git</h1>

<p>
One could summarize the reason why SQLite does not use Git in
a single sentence:  The lead SQLite developer finds Git to be
unpalatable.  If you like Git and want to use it, that's great.
I do not like Git and would rather use something that I think
is better.

<p>
The following are a few of the reasons why I do not like Git:

<h2>Git makes it difficult to find successors (descendents)
of a check-in</h2>

<p>
Git allows you to go backwards in time easily.  Given the latest
check-in on a branch, Git lets you see all the ancestors of that
check-in.  But Git makes it difficult to move in the other
direction.  Given some historical check-in, it is quite challenging
in Git to find out what came next.  It can be done, but it is sufficiently
difficult and people rarely do it.  Common interfaces for Git,
such as GitHub, do not support the ability.

<p>It is not impossible to find the descendents of a check-in
in Git.  It is merely difficult.  For example,
there is a 
[https://stackoverflow.com/questions/27960605/find-all-the-direct-descendants-of-a-given-commit#27962018|stackoverflow page]
showing the command sequence for finding the descendents of a check-in
in unix:

<codeblock>
git rev-list --all --parents | grep "^.\{40\}.*<PARENT_SHA1>.*" | awk '{print $1}'
</codeblock>

<p>
This command sequence is a lot to memorize and type.  (One would want
to create a bash alias or short shell script if it were used frequently.)
Furthermore, it is not quite the same thing.  The command above gives
one a list of descendents without showing the branching structure, which
is important for understanding what happened.
In contrast, Fossil offers displays such as
[https://sqlite.org/src/timeline?d=8a439a6dda390d74&n=15], which
is a tremendous help in analyzing the aftermath of historical changes.

<p>
And it is not really about just finding the descendents of a check-in
from time to time.  The fact that descendents are readily available in
Fossil means that the information pervades the web pages provided by
Fossil.  One example: Every Fossil check-in information page
([https://www.sqlite.org/src/info/ec7addc87f97bcff|example]) shows
a small "Context" graph of the immediate predecessor and successors 
to that check-in.  This helps the user maintain better situational
awareness, and it provides useful capabilities, such as the ability
click forward to the next check-in in sequence.  Another example:
Fossil easily shows the context around a specific check-in
([https://www.sqlite.org/src/timeline?c=2018-03-16&n=10|example])
which again helps to promote situational awareness and a deeper
understanding of what is happening in the code.

<p>
All of the above is possible with Git, given the right extensions
and tools and using the right commands.  But it is not easy to do,
and so it rarely gets done.  Consequently, developers have less awareness
of what is happening in the code.

<h2>The mental model for Git is needlessly complex</h2>

<p>
The complexity of Git
distracts attention from the software under development.  A user of Git
needs to keep all of the following in mind:
<ol type='a'>
<li> The working directory
<li> The "index" or staging area
<li> The local head
<li> The local copy of the remote head
<li> The actual remote head
</ol>
<p>
Git contains commands (or options on commands) for moving and
comparing content between all of these locations. 

<p>In contrast,
Fossil users only need to think about their working directory and
the check-in they are working on.  That is 60% less distraction.
Every developer has a finite number of brain-cycles.  Fossil
requires fewer brain-cycles to operate, thus freeing up 
intellectual resources to focus on the software under development.

<p>One user of both Git and Fossil
[https://news.ycombinator.com/item?id=16806955|writes in HN]:

<blockquote><i>
Fossil gives me peace of mind that I have everything ... synced to 
the server with a single command....
I never get this peace of mind with git.
</i></blockquote>

<h2>Git does not track historical branch names</h2>

<p>
Git keeps the complete DAG of the check-in sequence.  But branch
tags are local information that is not synced and not retained
once a branch closes.
This makes review of historical
branches tedious.

<p>
As an example, consider display of a single historical
branch of SQLite as rendered by GitHub and by Fossil:

<ul>
<li><b>GitHub:</b> [https://github.com/mackyle/sqlite/commits/prefer-coroutine-sort-subquery]
<li><b>Fossil:</b> [https://sqlite.org/src/timeline?r=prefer-coroutine-sort-subquery]
</ul>

<p>
The Fossil view clearly shows that the branch was eventually merged back into
trunk.  It shows where the branch started, and it shows two occasions where changes
on trunk were merged into the branch.  GitHub shows none of this.  In fact, the
GitHub display is mostly useless in trying to figure out what happened.

<p>
Many readers have recommended various third-party GUIs for Git that
might do a better job of showing historical development activity.  Maybe
some of them do work better than native Git and/or GitHub, though they
will all be hampered by the fact that Git does not preserve historical
branch names across syncs.  And even if those other tools are better,
the fact that it is necessary to go to a third-party tool to get the information
desired does not speak well of the core system.

<h2>Git requires more administrative support</h2>

<p>
Git is complex software.
One needs an installer of some kind to put Git on a developer
workstation, or to upgrade to a newer version of Git.
Setting up a Git server is non-trivial.  One could use GitHub,
but that introduces another third-party dependency and a
centralized service, which mitigate the key advantage of Git
which is that it is "distributed".  There are various free
alternatives to GitHub, such as GitLab, but those too require
a lot of dependences and a lot of server setup.

<p>
In contrast, Fossil is a single standalone binary which one
installs by placing it to $PATH.  That one binary contains all
the functionality of core Git and also GitHub or GitLab.  It
manages a community server with wiki and bug tracking, provides
packaged downloads for consumers, login managements, and so forth,
with no extra software required.

<p>
Less administration means that programmers spend more time working
on the software (SQLite in this case) and less time fussing with
the version control system.

<h2>Git provides a poor user experience</h2>

<p>The following [https://xkcd.com/1579/] cartoon is an
exaggeration, yet hits close to home:

<p>
<img src="https://www.fossil-scm.org/fossil/doc/trunk/www/xkcd-git.gif">

<p>Let's be real.  Few people seriously dispute that Git provides
a suboptimal user experience.  A lot of 
the underlying implementation shows through into the user
interface.  The interface is so bad that there is even a
parody site that generates
[https://git-man-page-generator.lokaltog.net/|fake git man pages].

<p>Designing software is hard.  It takes a lot of focus.
A good version control system should provide the developer with
assistance, not frustration.  Git has gotten better in this
regard over the past decade, but it still has a long way to go.
And so, the developers of SQLite plan to continue using a 
difference version control system for now.

<a name="getthecode"></a>
<h1>A Git-User's Guide To Accessing SQLite Source Code</h1>

<p>
If you are a devoted Git user, you can still easily access SQLite.  
This section gives some hints on how to do so.

<h2>GitHub Mirrors</h2>

<p>
There is a mirror of the SQLite source tree on GitHub at
[https://github.com/mackyle/sqlite].  This mirror is maintained
by user "mackyle" who is unaffiliated with, and unknown to,
the official SQLite development team.  We do not know mackyle,
but we observe that he does a terrific job of keeping his mirror
current, and so if you want to access the SQLite source code on
GitHub, his mirror is the recommended source.

<h2>Web Access</h2>

<p>
The [https://sqlite.org/src/timeline|SQLite Fossil Repository] contains links
for downloading  a Tarball, ZIP Archive, or [SQLite Archive] for any
historical version of SQLite.  The URLs for these downloads are
simple and can be incorporated easily into automated tools.  The format is:

<center>
<tt>https://sqlite.org/src/tarball/</tt><i>VERSION</i><tt>/sqlite.tar.gz</tt>
</center>

<p>
Simply replace <i>VERSION</i> with some description of the version to be
downloaded.  The <i>VERSION</i> can be a prefix of the cryptographic hash
name of a specific check-in, or the name of a branch (in which case the
most recent version of the branch is fetched) or a tag for a specific
check-in like "version-3.23.0".

<h2>Fossil Access</h2>

<p>
Fossil is really easy to install and use.  Here are the steps for unix.
(Windows is similar.)

<ol>
<li>
Download the self-contained Fossil executable from
[https://fossil-scm.org/fossil/uv/download.html] and put the executable
somewhere on your $PATH.
<li><tt>mkdir ~/fossils</tt>
<li><tt>fossil clone https://sqlite.org/src ~/fossils/sqlite.fossil</tt>
<li><tt>mkdir ~/sqlite; cd ~/sqlite</tt>
<li><tt>fossil open ~/fossils/sqlite.fossil</tt>
</ol>

<p>
Subsequently, to update your check-out, simply type:

<blockquote>
<tt>fossil up </tt><i>VERSION</i>
</blockquote>

<p>
Use "trunk" for version to get the latest trunk version of SQLite.
Or use a prefix of a cryptographic hash name, or the name of some branch
or tag.

<p>
Use the "<tt>fossil ui</tt>" command from within the ~/sqlite checkout to
bring up a local copy of the website.

<h1>See Also</h1>

<p>Other pages that talk about Fossil and Git include:
<ul>
<li><p>[https://fossil-scm.org/fossil/doc/trunk/www/fossil-v-git.wiki|Fossil vs. Git]
<li><p>[https://www.fossil-scm.org/fossil/doc/trunk/www/quotes.wiki|What others say about Fossil and Git]
</ul>
