<title>Query Planning</title>
<tcl>
hd_keywords {indexing} {indexing tutorial}
proc figure {fignum tag img title} {
  if {$tag!=""} {
    set tag [string trim $tag #]
    hd_puts "<a name='$tag'></a>\n"
  }
  hd_puts "<p><center>\n"
  hd_puts "<img src=\"images/qp/$img\" alt=\"figure $fignum\"><br>\n"
  hd_puts "Figure $fignum: $title\n"
  hd_puts "</center></p>\n"
}
proc code {txt} {
  hd_puts "<center><table><tr><td><pre>\n"
  regsub {^[ \n]*\n} $txt {} txt
  hd_puts [string trimright $txt]\n
  hd_puts "</pre></table></center>\n"
}
</tcl>

<table_of_contents>

<h2 style="margin-left:1.0em" notoc id=overview> Overview</h2> 

<p>
The best feature of SQL (in <u>all</u> its implementations, not just SQLite)
is that it is a <i>declarative</i> language, not a <i>procedural</i>
language.  When programming in SQL you tell the system <i>what</i> you
want to compute, not <i>how</i> to compute it.  The task of figuring out
the <i>how</i> is delegated to the <i>query planner</i> subsystem within 
the SQL database engine.</p>

<p>For any given SQL statement, there might be hundreds or thousands or
even millions of different algorithms of performing the operation.  All
of these algorithms will get the correct answer, though some will run
faster than others.
The query planner is an 
[https://en.wikipedia.org/wiki/Artificial_intelligence|AI] that 
tries to pick the fastest and most efficient algorithm for each SQL
statement.
</p>

<p>
Most of the time, the query planner in SQLite does a good job.
However, the query planner needs indices to
work with.  
These indices must normally be added by programmers.
Rarely, the query planner AI will make a suboptimal algorithm
choice.
In those cases, programmers may want to provide additional
hints to help the query planner do a better job.
</p>

<p>
This document provides background information about how the
SQLite query planner and query engine work.
Programmers can use this information to help create better
indexes, and provide hints to help the query planner when
needed.
</p>

<p>
Additional information is provided in the
[next generation query planner] document.
</p>

<tcl>hd_fragment searching strategies</tcl>
<h1> Searching</h1>

<h2> Tables Without Indices</h2>

<p>
Most tables in SQLite consist of zero or more rows with a unique integer
key (the [rowid] or [INTEGER PRIMARY KEY]) followed by content.  
(The exception is [WITHOUT ROWID] tables.)
The rows
are logically stored in order of increasing rowid.  As an example, this
article uses a table named "FruitsForSale" which relates various fruits 
to the state
where they are grown and their unit price at market.  The schema is this:
</p>

<tcl>code {
CREATE TABLE FruitsForSale(
  Fruit TEXT,
  State TEXT,
  Price REAL
);
}</tcl>

<p>
With some (arbitrary) data, such a table might be logically stored on disk
as shown in figure 1:
</p>

<tcl>figure 1 #fig1 tab.gif {Logical Layout Of Table "FruitsForSale"}</tcl>

<p>
In this example, the rowids are not
consecutive but they are ordered.  SQLite usually creates rowids beginning
with one and increasing by one with each added row.  But if rows are 
deleted, gaps can appear in the sequence.  And the application can control
the rowid assigned if desired, so that rows are not necessarily inserted 
at the bottom.  But regardless of what happens, the rowids are always 
unique and in strictly ascending order.
</p>

<p>
Suppose you want to look up the price of peaches.  The query would
be as follows:
</p>

<tcl>code {
SELECT price FROM fruitsforsale WHERE fruit='Peach';
}</tcl>

<p>
To satisfy this query, SQLite reads every row out of the
table, checks to see if the "fruit" column has the value of "Peach" and if
so, outputs the "price" column from that row.  The process is illustrated
by <a href="#fig2">figure 2</a> below.
This is algorithm is called a <i>full table scan</i> 
since the entire content of the
table must be read and examined in order to find the one row of interest.
With a table of only 7 rows, a full table scan is acceptable, 
but if the table contained 7 million rows, a full table scan might read 
megabytes of content in order to find a single 8-byte number.  
For that reason, one normally tries to avoid full table scans.
</p>

<tcl>figure 2 #fig2 fullscan.gif {Full Table Scan}</tcl>

<h2> Lookup By Rowid</h2>

<p>
One technique for avoiding a full table scan is to do lookups by
rowid (or by the equivalent [INTEGER PRIMARY KEY]).   To lookup the
price of peaches, one would query for the entry with a rowid of 4:
</p>

<tcl>code {
SELECT price FROM fruitsforsale WHERE rowid=4;
}</tcl>

<p>
Since the information is stored in the table in rowid order, SQLite
can find the correct row using a binary search.
If the table contains N element, the time required to look up the
desired row is proportional to logN rather than being proportional
to N as in a full table scan.  If the table contains 10 million elements,
that means the query will be on the order of N/logN or about 1 million
times faster.
</p>

<tcl>figure 3 #fig3 rowidlu.gif {Lookup By Rowid}</tcl>

<h2> Lookup By Index</h2>
<p>
The problem with looking up information by rowid is that you probably
do not care what the price of "item 4" is - you want to know the price
of peaches.  And so a rowid lookup is not helpful.
</p>

<p>
To make the original query more efficient, we can add an index on the
"fruit" column of the "fruitsforsale" table like this:
</p>

<tcl>code {
CREATE INDEX Idx1 ON fruitsforsale(fruit);
}</tcl>

<p>
An index is another table similar to the original "fruitsforsale" table
but with the content (the fruit column in this case) stored in front of the
rowid and with all rows in content order.
<a href="#fig4">Figure 4</a> gives a logical view of the Idx1 index.
The "fruit" column is the primary key used to order the elements of the
table and the "rowid" is the secondary key used to break the tie when
two or more rows have the same "fruit".  In the example, the rowid
has to be used as a tie-breaker for the "Orange" rows.
Notice that since the rowid
is always unique over all elements of the original table, the composite key
of "fruit" followed by "rowid" will be unique over all elements of the index.
</p>

<tcl>figure 4 #fig4 idx1.gif {An Index On The Fruit Column}</tcl>

<p>
This new index can be used to implement a faster algorithm for the
original "Price of Peaches" query.
</p>

<tcl>code {
SELECT price FROM fruitsforsale WHERE fruit='Peach';
}</tcl>

<p>
The query starts by doing a binary search on the Idx1 index for entries
that have fruit='Peach'.  SQLite can do this binary search on the Idx1 index
but not on the original FruitsForSale table because the rows in Idx1 are sorted
by the "fruit" column.  Having found a row in the Idx1 index that has
fruit='Peach', the database engine can extract the rowid for that row.
Then the database engines does a second binary search
on the original FruitsForSale table to find the
original row that contains fruit='Peach'.  
From the row in the FruitsForSale table,
SQLite can then extract the value of the price column.
This procedure is illustrated by <a href="#fig5">figure 5</a>.
</p>

<tcl>figure 5 #fig5 idx1lu1.gif {Indexed Lookup For The Price Of Peaches}</tcl>

<p>
SQLite has to do two binary searches to find the price of peaches using
the method show above.  But for a table with a large number of rows, this
is still much faster than doing a full table scan.
</p>

<h2> Multiple Result Rows</h2>

<p>
In the previous query the fruit='Peach' constraint narrowed the result
down to a single row.  But the same technique works even if multiple
rows are obtained.  Suppose we looked up the price of Oranges instead of
Peaches:
</p>

<tcl>
code {SELECT price FROM fruitsforsale WHERE fruit='Orange'}
figure 6 #fig6 idx1lu2.gif {Indexed Lookup For The Price Of Oranges}
</tcl>

<p>
In this case, SQLite still does a single binary search to find the first
entry of the index where fruit='Orange'.  Then it extracts the rowid from
the index and uses that rowid to lookup the original table entry via
binary search and output the price from the original table.  But instead
of quitting, the database engine then advances to the next row of index
to repeat the process for next fruit='Orange' entry.  Advancing to the
next row of an index (or table) is much less costly than doing a binary
search since the next row is often located on the same database page as
the current row.  In fact, the cost of advancing to the next row is so
cheap in comparison to a binary search that we usually ignore it.  So
our estimate for the total cost of this query is 3 binary searches.
If the number of rows of output is K and the number of rows in the table
is N, then in general the cost of doing the query is proportional
to (K+1)*logN.
</p>

<h2> Multiple AND-Connected WHERE-Clause Terms</h2>

<p>
Next, suppose that you want to look up the price of not just any orange,
but specifically California-grown oranges.  The appropriate query would
be as follows:
</p>

<tcl>
code {SELECT price FROM fruitsforsale WHERE fruit='Orange' AND state='CA'}
figure 7 #fig7 idx1lu3.gif {Indexed Lookup Of California Oranges}
</tcl>

<p>
One approach to this query is to use the fruit='Orange' term of the WHERE
clause to find all rows dealing with oranges, then filter those rows
by rejecting any that are from states other than California.  This
process is shown by <a href="#fig7">figure 7</a> above.  This is a perfectly
reasonable approach in most cases.  Yes, the database engine did have
to do an extra binary search for the Florida orange row that was
later rejected, so it was not as efficient as we might hope, though
for many applications it is efficient enough.  
</p>

<p>
Suppose that in addition to the index on "fruit" there was also
an index on "state".
</p>

<tcl>
code {CREATE INDEX Idx2 ON fruitsforsale(state);}
figure 8 #fig8 idx2.gif {Index On The State Column}
</tcl>

<p>
The "state" index works just like the "fruit" index in that it is a
new table with an extra column in front of the rowid and sorted by
that extra column as the primary key.  The only difference is that
in Idx2, the first column is "state" instead of "fruit" as it is with
Idx1.  In our example data set, there is more redundancy in the "state"
column and so they are more duplicate entries.  The ties are still
resolved using the rowid.
</p>

<p>
Using the new Idx2 index on "state", SQLite has another option for
lookup up the price of California oranges:  it can look up every row
that contains fruit from California and filter out those rows that
are not oranges.
</p>

<tcl>figure 9 #fig9 idx2lu1.gif {Indexed Lookup Of California Oranges}</tcl>

<p>
Using Idx2 instead of Idx1 causes SQLite to examine a different set of
rows, but it gets the same answer in the end (which is very important -
remember that indices should never change the answer, only help SQLite to
get to the answer more quickly) and it does the same amount of work.
So the Idx2 index did not help performance in this case.
</p>

<p>
The last two queries take the same amount of time, in our example.
So which index, Idx1 or Idx2, will SQLite choose?  If the
[ANALYZE] command has been run on the database, so that SQLite has
had an opportunity to gather statistics about the available indices,
then SQLite will know that the Idx1 index usually narrows the search
down to a single item (our example of fruit='Orange' is the exception
to this rule) whereas the Idx2 index will normally only narrow the 
search down to two rows.  So, if all else is equal, SQLite will
choose Idx1 with the hope of narrowing the search to as small
a number of rows as possible.  This choice is only possible because
of the statistics provided by [ANALYZE].  If [ANALYZE] has not been
run then the choice of which index to use is arbitrary.
</p>

<h2> Multi-Column Indices</h2>

<p>
To get the maximum performance out of a query with multiple AND-connected
terms in the WHERE clause, you really want a multi-column index with
columns for each of the AND terms.  In this case we create a new index
on the "fruit" and "state" columns of FruitsForSale:
</p>

<tcl>
code {CREATE INDEX Idx3 ON FruitsForSale(fruit, state);}
figure 1 #fig10 idx3.gif {A Two-Column Index}
</tcl>

<p>
A multi-column index follows the same pattern as a single-column index;
the indexed columns are added in front of the rowid.  The only difference
is that now multiple columns are added.  The left-most column is the
primary key used for ordering the rows in the index.  The second column is
used to break ties in the left-most column.  If there were a third column,
it would be used to break ties for the first two columns.  And so forth for
all columns in the index.  Because rowid is guaranteed
to be unique, every row of the index will be unique even if all of the
content columns for two rows are the same.  That case does not happen
in our sample data, but there is one case (fruit='Orange') where there
is a tie on the first column which must be broken by the second column.
</p>

<p>
Given the new multi-column Idx3 index, it is now possible for SQLite
to find the price of California oranges using only 2 binary searches:
</p>

<tcl>
code {SELECT price FROM fruitsforsale WHERE fruit='Orange' AND state='CA'}
figure 11 #fig11 idx3lu1.gif {Lookup Using A Two-Column Index}
</tcl>

<p>
With the Idx3 index on both columns that are constrained by the WHERE clause,
SQLite can do a single binary search against Idx3 to find the one rowid
for California oranges, then do a single binary search to find the price
for that item in the original table.  There are no dead-ends and no
wasted binary searches.  This is a more efficient query.
</p>

<p>
Note that Idx3 contains all the same information as the original 
<a href="#fig3">Idx1</a>.  And so if we have Idx3, we do not really need Idx1
any more.  The "price of peaches" query can be satisfied using Idx3
by simply ignoring the "state" column of Idx3:
</p>

<tcl>
code {SELECT price FROM fruitsforsale WHERE fruit='Peach'}
figure 12 #fig12 idx3lu2.gif {Single-Column Lookup On A Multi-Column Index}
</tcl>

<p>
Hence, a good rule of thumb is that your database schema should never
contain two indices where one index is a prefix of the other.  Drop the
index with fewer columns.  SQLite will still be able to do efficient
lookups with the longer index.
</p>

<tcl>hd_fragment covidx {covering index} {covering indices}</tcl>
<h2> Covering Indices</h2>

<p>
The "price of California oranges" query was made more efficient through
the use of a two-column index.  But SQLite can do even better with a
three-column index that also includes the "price" column:
</p>

<tcl>
code {CREATE INDEX Idx4 ON FruitsForSale(fruit, state, price);}
figure 13 #fig13 idx4.gif {A Covering Index}
</tcl>

<p>
This new index contains all the columns of the original FruitsForSale table that
are used by the query - both the search terms and the output.  We call
this a "covering index".  Because all of the information needed is in
the covering index, SQLite never needs to consult the original table
in order to find the price.
</p>

<tcl>
code {SELECT price FROM fruitsforsale WHERE fruit='Orange' AND state='CA';}
figure 14 #fig14 idx4lu1.gif {Query Using A Covering Index}
</tcl>

<p>
Hence, by adding extra "output" columns onto the end of an index, one
can avoid having to reference the original table and thereby
cut the number of binary searches for a query in half.  This is a
constant-factor improvement in performance (roughly a doubling of
the speed).  But on the other hand, it is also just a refinement;
A two-fold performance increase is not nearly as dramatic as the
one-million-fold increase seen when the table was first indexed.
And for most queries, the difference between 1 microsecond and
2 microseconds is unlikely to be noticed.
</p>

<tcl>hd_fragment or_in_where or-connected-terms</tcl>
<h2> OR-Connected Terms In The WHERE Clause</h2>

<p>
Multi-column indices only work if the constraint terms in the WHERE
clause of the query are connected by AND.
So Idx3 and Idx4 are helpful when the search is for items that
are both Oranges and grown in California, but neither index would
be that useful if we wanted all items that were either oranges
<i>or</i> are grown in California.
</p>

<tcl>code {
SELECT price FROM FruitsForSale WHERE fruit='Orange' OR state='CA';
}</tcl>

<p>
When confronted with OR-connected terms in a WHERE clause, SQLite 
examines each OR term separately and tries to use an index to
find the rowids associated with each term.
It then takes the union of the resulting rowid sets to find
the end result.  The following figure illustrates this process:
</p>

<tcl>figure 15 #fig15 orquery.gif {Query With OR Constraints}</tcl>

<p>
The diagram above implies that SQLite computes all of the rowids first
and then combines them with a union operation before starting to do
rowid lookups on the original table.  In reality, the rowid lookups
are interspersed with rowid computations.  SQLite uses one index at
a time to find rowids while remembering which rowids it has seen
before so as to avoid duplicates.  That is just an implementation
detail, though.  The diagram, while not 100% accurate, provides a good
overview of what is happening.
</p>

<p>
In order for the OR-by-UNION technique shown above to be useful, there
must be an index available that helps resolve every OR-connected term
in the WHERE clause.  If even a single OR-connected term is not indexed,
then a full table scan would have to be done in order to find the rowids
generated by the one term, and if SQLite has to do a full table scan, it
might as well do it on the original table and get all of the results in
a single pass without having to mess with union operations and follow-on
binary searches.
</p>

<p>
One can see how the OR-by-UNION technique could also be leveraged to
use multiple indices on queries where the WHERE clause has terms connected
by AND, by using an intersect operator in place of union.  Many SQL
database engines will do just that.  But the performance gain over using
just a single index is slight and so SQLite does not implement that technique
at this time.  However, a future version SQLite might be enhanced to support
AND-by-INTERSECT.
</p>

<tcl>hd_fragment sorting sorting</tcl>
<h1> Sorting</h1>

<p>
SQLite (like all other SQL database engines) can also use indices to
satisfy the ORDER BY clauses in a query, in addition to expediting
lookup.  In other words, indices can be used to speed up sorting as
well as searching.
</p>

<p>
When no appropriate indices are available, a query with an ORDER BY
clause must be sorted as a separate step.  Consider this query:
</p>

<tcl>code {SELECT * FROM fruitsforsale ORDER BY fruit;}</tcl>

<p>
SQLite processes this by gathering all the output of query and then
running that output through a sorter.
</p>

<tcl>figure 16 #fig16 obfruitnoidx.gif {Sorting Without An Index}</tcl>

<p>
If the number of output rows is K, then the time needed to sort is
proportional to KlogK.  If K is small, the sorting time is usually
not a factor, but in a query such as the above where K==N, the time
needed to sort can be much greater than the time needed to do a
full table scan.  Furthermore, the entire output is accumulated in
temporary storage (which might be either in main memory or on disk,
depending on various compile-time and run-time settings)
which can mean that a lot of temporary storage is required to complete
the query.
</p>

<h2> Sorting By Rowid</h2>

<p>
Because sorting can be expensive, SQLite works hard to convert ORDER BY
clauses into no-ops.  If SQLite determines that output will
naturally appear in the order specified, then no sorting is done.
So, for example, if you request the output in rowid order, no sorting
will be done:
</p>

<tcl>
code {SELECT * FROM fruitsforsale ORDER BY rowid;}
figure 17 #fig17 obrowid.gif {Sorting By Rowid}
</tcl>

<p>
You can also request a reverse-order sort like this:
</p>

<tcl>code {SELECT * FROM fruitsforsale ORDER BY rowid DESC;}</tcl>

<p>
SQLite will still omit the sorting step.  But in order for output to
appear in the correct order, SQLite will do the table scan starting at
the end and working toward the beginning, rather than starting at the
beginning and working toward the end as shown in 
<a href="#fig17">figure 17</a>.
</p>

<h2> Sorting By Index</h2>

<p>
Of course, ordering the output of a query by rowid is seldom useful.
Usually one wants to order the output by some other column.
</p>

<p>
If an index is available on the ORDER BY column, that index can be used
for sorting.  Consider the request for all items sorted by "fruit":
</p>

<tcl>code {SELECT * FROM fruitsforsale ORDER BY fruit;}</tcl>

<tcl>figure 18 #fig18 obfruitidx1.gif {Sorting With An Index}</tcl>

<p>
The Idx1 index is scanned from top to bottom (or from bottom to top if
"ORDER BY fruit DESC" is used) in order to find the rowids for each item
in order by fruit.  Then for each rowid, a binary search is done to lookup
and output that row.  In this way, the output appears in the requested order
without the need to gather the entire output and sort it using a separate step.
</p>

<p>
But does this really save time?  The number of steps in the 
<a href="#fig16">original indexless sort</a> is proportional to NlogN since
that is how much time it takes to sort N rows.  But when we use Idx1 as
shown here, we have to do N rowid lookups which take logN time each, so
the total time of NlogN is the same!
</p>

<p>
SQLite uses a cost-based query planner.  When there are two or more ways
of solving the same query, SQLite tries to estimate the total amount of
time needed to run the query using each plan, and then uses the plan with
the lowest estimated cost.  A cost is computed mostly from the estimated
time, and so this case could go either way depending on the table size and
what WHERE clause constraints were available, and so forth.  But generally
speaking, the indexed sort would probably be chosen, if for no other
reason, because it does not need to accumulate the entire result set in
temporary storage before sorting and thus uses much less temporary storage.
</p>

<h2> Sorting By Covering Index</h2>

<p>
If a covering index can be used for a query, then the multiple rowid lookups
can be avoided and the cost of the query drops dramatically.
</p>

<tcl>
figure 19 #fig19 obfruitidx4.gif {Sorting With A Covering Index}
</tcl>

<p>
With a covering index, SQLite can simply walk the index from one end to the
other and deliver the output in time proportional to N and without having
allocate a large buffer to hold the result set.
</p>

<h1> Searching And Sorting At The Same Time</h1>

<p>
The previous discussion has treated searching and sorting as separate
topics.  But in practice, it is often the case that one wants to search
and sort at the same time.  Fortunately, it is possible to do this
using a single index.
</p>

<h2> Searching And Sorting With A Multi-Column Index</h2>

<p>
Suppose we want to find the prices of all kinds of oranges sorted in
order of the state where they are grown.  The query is this:
</p>

<tcl>
code {SELECT price FROM fruitforsale WHERE fruit='Orange' ORDER BY state}
</tcl>

<p>
The query contains both a search restriction in the WHERE clause
and a sort order in the ORDER BY clause.  Both the search and the sort
can be accomplished at the same time using the two-column index Idx3.
</p>

<tcl>
figure 20 #fig20 fruitobstate0.gif {Search And Sort By Multi-Column Index}
</tcl>

<p>
The query does a binary search on the index to find the subset of rows
that have fruit='Orange'.  (Because the fruit column is the left-most column
of the index and the rows of the index are in sorted order, all such 
rows will be adjacent.)  Then it scans the matching index rows from top to
bottom to get the rowids for the original table, and for each rowid does
a binary search on the original table to find the price.
</p>

<p>
You will notice that there is no "sort" box anywhere in the above diagram.
The ORDER BY clause of the query has become a no-op.  No sorting has to be
done here because the output order is by the state column and the state
column also happens to be the first column after the fruit column in the
index.  So, if we scan entries of the index that have the same value for
the fruit column from top to bottom, those index entries are guaranteed to
be ordered by the state column.
</p>

<tcl>hd_fragment {srchsortcovidx}</tcl>
<h2> Searching And Sorting With A Covering Index</h2>

<p>
A [covering index] can also be used to search and sort at the same time.
Consider the following:
</p>

<tcl>
code {SELECT * FROM fruitforsale WHERE fruit='Orange' ORDER BY state}
figure 21 #fig21 fruitobstate.gif {Search And Sort By Covering Index}
</tcl>

<p>
As before, SQLite does single binary search
for the range of rows in the covering
index that satisfy the WHERE clause, the scans that range from top to 
bottom to get the desired results.  
The rows that satisfy the WHERE clause are guaranteed to be adjacent
since the WHERE clause is an equality constraint on the left-most
column of the index.  And by scanning the matching index rows from
top to bottom, the output is guaranteed to be ordered by state since the
state column is the very next column to the right of the fruit column.
And so the resulting query is very efficient.
</p>

<p>
SQLite can pull a similar trick for a descending ORDER BY:
</p>

<tcl>
code {SELECT * FROM fruitforsale WHERE fruit='Orange' ORDER BY state DESC}
</tcl>

<p>
The same basic algorithm is followed, except this time the matching rows
of the index are scanned from bottom to top instead of from top to bottom,
so that the states will appear in descending order.
</p>

<tcl>hd_fragment {partialsort} {partial sorting by index} {block sorting}</tcl>
<h2> Partial Sorting Using An Index (a.k.a. Block Sorting)</h2>

<p>
Sometimes only part of an ORDER BY clause can be satisfied using indexes.
Consider, for example, the following query:
</p>

<tcl>
code {SELECT * FROM fruitforsale ORDER BY fruit, price}
</tcl>

<p>
If the covering index is used for the scan, the "fruit" column will appear
naturally in the correct order, but when there are two or more rows with
the same fruit, the price might be out of order.  When this occurs, SQLite
does many small sorts, one sort for each distinct value of fruit, rather
than one large sort.  Figure 22 below illustrates the concept.
</p>

<tcl>
figure 22 #fig22 partial-sort.gif {Partial Sort By Index}
</tcl>

<p>
In the example, instead of a single sort of 7 elements, there
are 5 sorts of one-element each and 1 sort of 2 elements for the
case of fruit=='Orange'.

<p>
The advantages of doing many smaller sorts instead of a single large sort
are:
<ol>
<li>Multiple small sorts collectively use fewer CPU cycles than a single
    large sort.
<li>Each small sort is run independently, meaning that much less information
    needs to be kept in temporary storage at any one time.
<li>Those columns of the ORDER BY that are already in the correct order
    due to indexes can be omitted from the sort key, further reducing
    storage requirements and CPU time.
<li>Output rows can be returned to the application as each small sort
    completes, and well before the table scan is complete.
<li>If a LIMIT clause is present, it might be possible to avoid scanning
    the entire table.
</ol>

<p>Because of these advantages, SQLite always tries to do a partial sort using an
index even if a complete sort by index is not possible.</p>

<h1> WITHOUT ROWID tables</h1>

<p>
The basic principals described above apply to both ordinary rowid tables
and [WITHOUT ROWID] tables.
The only difference is that the rowid column that serves as the key for
tables and that appears as the right-most term in indexes is replaced by
the PRIMARY KEY.
</p>
