Documentation Source Text

-- Run this script with "sqlite3 --append docapp" to append the appropriate
-- SQLAR database onto the end of the raw docapp binary.
--
DROP TABLE IF EXISTS sqlar;
.ar -c main.tcl wapp.tcl doc
DELETE FROM sqlar WHERE name LIKE '%/matrix/%';
PRAGMA page_size=512;
VACUUM;

eval [db one {SELECT sqlar_uncompress(data,sz) FROM sqlar
               WHERE name='wapp.tcl'}]
proc wapp-default {} {
  global wapp
  set x [string trimleft [dict get $wapp PATH_INFO] /]
  if {$x==""} {set x index.html}
  set doc [db one {SELECT sqlar_uncompress(data,sz)
                   FROM sqlar WHERE name=('doc/' || $x)}]
  if {$doc==""} {
    wapp-subst {<h1>Not Found: %html(/$x)</h1>}
    return
  }
  dict set wapp .reply $doc
  switch -glob -- $x {
    *.html {wapp-mimetype text/html}
    *.gif {wapp-mimetype image/gif}
    *.jpg {wapp-mimetype image/jpeg}
    *.png {wapp-mimetype image/png}
    *.css {wapp-mimetype text/css}
    default {wapp-mimetype text/html}
  }
}
wapp-start $argv

# Copyright (c) 2017 D. Richard Hipp
# 
# This program is free software; you can redistribute it and/or
# modify it under the terms of the Simplified BSD License (also
# known as the "2-Clause License" or "FreeBSD License".)
#
# This program is distributed in the hope that it will be useful,
# but without any warranty; without even the implied warranty of
# merchantability or fitness for a particular purpose.
#
#---------------------------------------------------------------------------
#
# Design rules:
#
#   (1)  All identifiers in the global namespace begin with "wapp"
#
#   (2)  Indentifiers intended for internal use only begin with "wappInt"
#

# Add text to the end of the HTTP reply.  wapp and wapp-safe work the
# same.  The only difference is in how wapp-safety-check deals with these
# procs during analysis.
#
proc wapp {txt} {
  global wapp
  dict append wapp .reply $txt
}
proc wapp-unsafe {txt} {
  global wapp
  dict append wapp .reply $txt
}

# Append text after escaping it for HTML.
#
# The following commands are the same:
#
#      wapp-escape-html TEXT
#      wapp-subst %html(TEXT)
#
proc wapp-escape-html {txt} {
  global wapp
  dict append wapp .reply [string map {& &amp; < &lt; > &gt;} $txt]
}

# Append text after escaping it for URL query parameters.
#
# The following commands are the same:
#
#      wapp-escape-url TEXT
#      wapp-subst %url(TEXT)
#
proc wapp-escape-url {txt} {
  global wapp
  dict append wapp .reply [wappInt-enc-url $txt]
}

# The argument should be in {...}.  Substitions of %html(...) encode ...
# escaped for safe insertion into HTML.  %url(...) substitions encode the
# argument for safe insertion into query parameters of URLs.  Backslash
# substitutions are also performed, but variable substitutions are not,
# except within %html() and %url().
#
proc wapp-subst {txt} {
  global wapp
  regsub -all {%(html|url|qp|unsafe)\(([^)]+)\)} $txt \
         {[wappInt-enc-\1 "\2"]} txt
  dict append wapp .reply [uplevel 1 [list subst -novariables $txt]]
}

# There must be a wappInt-enc-NAME routine for each possible substitution
# in wapp-subst.  Thus there are routines for "html", "url", "qp", and "unsafe".
#
#    wappInt-enc-html           Escape text so that it is safe to use in the
#                               body of an HTML document.
#
#    wappInt-enc-url            Escape text so that it is safe to pass as an
#                               argument to href= and src= attributes in HTML.
#
#    wappInt-enc-qp             Escape text so that it is safe to use as the
#                               value of a query parameter in a URL or in
#                               post data or in a cookie.
#
#    wappInt-enc-unsafe         Perform no encoding at all.  Unsafe.
#
proc wappInt-enc-html {txt} {
  return [string map {& &amp; < &lt; > &gt;} $txt]
}
proc wappInt-enc-unsafe {txt} {
  return $txt
}
proc wappInt-enc-url {s} {
  if {[regsub -all {[^-{}@~?=#_.:/a-zA-Z0-9]} $s {[wappInt-%HHchar {&}]} s]} {
    set s [subst -novar -noback $s]
  }
  if {[regsub -all {[{}]} $s {[wappInt-%HHchar \\&]} s]} {
    set s [subst -novar -noback $s]
  }
  return $s
}
proc wappInt-enc-qp {s} {
  if {[regsub -all {[^-{}_.a-zA-Z0-9]} $s {[wappInt-%HHchar {&}]} s]} {
    set s [subst -novar -noback $s]
  }
  if {[regsub -all {[{}]} $s {[wappInt-%HHchar \\&]} s]} {
    set s [subst -novar -noback $s]
  }
  return $s
}

# This is a helper routine for wappInt-enc-url and wappInt-enc-qp.  It returns
# an appropriate %HH encoding for the single character c.  If c is a unicode
# character, then this routine might return multiple bytes:  %HH%HH%HH
#
proc wappInt-%HHchar {c} {
  if {$c==" "} {return +}
  return [regsub -all .. [binary encode hex [encoding convertto utf-8 $c]] {%&}]
}


# Undo the www-url-encoded format.
#
# HT: This code stolen from ncgi.tcl
#
proc wappInt-decode-url {str} {
  set str [string map [list + { } "\\" "\\\\" \[ \\\[ \] \\\]] $str]
  regsub -all -- \
      {%([Ee][A-Fa-f0-9])%([89ABab][A-Fa-f0-9])%([89ABab][A-Fa-f0-9])} \
      $str {[encoding convertfrom utf-8 [binary decode hex \1\2\3]]} str
  regsub -all -- \
      {%([CDcd][A-Fa-f0-9])%([89ABab][A-Fa-f0-9])}                     \
      $str {[encoding convertfrom utf-8 [binary decode hex \1\2]]} str
  regsub -all -- {%([0-7][A-Fa-f0-9])} $str {\\u00\1} str
  return [subst -novar $str]
}

# Do URL encoding
#

# Reset the document back to an empty string.
#
proc wapp-reset {} {
  global wapp
  dict set wapp .reply {}
}

# Change the mime-type of the result document.
proc wapp-mimetype {x} {
  global wapp
  dict set wapp .mimetype $x
}

# Change the reply code.
#
proc wapp-reply-code {x} {
  global wapp
  dict set wapp .reply-code $x
}

# Set a cookie
#
proc wapp-set-cookie {name value} {
  global wapp
  dict lappend wapp .new-cookies $name $value
}

# Examine the bodys of all procedures in this program looking for
# unsafe calls to "wapp".  Return a text string containing warnings.
# Return an empty string if all is ok.
#
# This routine is advisory only.  It misses some constructs that are
# dangerous and flags others that are safe.
#
proc wapp-safety-check {} {
  set res {}
  foreach p [info procs] {
    set ln 0
    foreach x [split [info body $p] \n] {
      incr ln
      if {[regexp {^[ \t]*wapp[ \t]+([^\n]+)} $x all tail]
       && [string index $tail 0]!="\173"
       && [regexp {[[$]} $tail]
      } {
        append res "$p:$ln: unsafe \"wapp\" call: \"[string trim $x]\"\n"
      }
      if {[regexp {^[ \t]*wapp-subst[ \t]+[^\173]} $x]} {
        append res "$p:$ln: unsafe \"wapp-subst\" call: \"[string trim $x]\"\n"
      }
    }
  }
  return $res
}

# Start up the wapp framework.  Parameters are a list passed as the
# single argument.
#
#    -server $PORT         Listen for HTTP requests on this TCP port $PORT
#
#    -scgi $PORT           Listen for SCGI requests on TCP port $PORT
#
#    -cgi                  Perform a single CGI request
#
# With no arguments, the behavior is called "auto".  In "auto" mode,
# if the GATEWAY_INTERFACE environment variable indicates CGI, then run
# as CGI.  Otherwise, start an HTTP server bound to the loopback address
# only, on an arbitrary TCP port, and automatically launch a web browser
# on that TCP port.
#
proc wapp-start {arglist} {
  global env
  set mode auto
  set port 0
  set n [llength $arglist]
  for {set i 0} {$i<$n} {incr i} {
    set term [lindex $arglist $i]
    if {[string match --* $term]} {set term [string range $term 1 end]}
    switch -- $term {
      -server {
        incr i;
        set mode "server"
        set port [lindex $arglist $i]
      }
      -scgi {
        incr i;
        set mode "scgi"
        set port [lindex $arglist $i]
      }
      -cgi {
        set mode "cgi"
      }
      default {
        error "unknown option: $term"
      }
    }
  }
  if {($mode=="auto"
       && [info exists env(GATEWAY_INTERFACE)]
       && $env(GATEWAY_INTERFACE)=="CGI/1.0")
    || $mode=="cgi"
  } {
    wappInt-handle-cgi-request
    return
  }
  if {$mode=="scgi"} {
    wappInt-start-listener $port 1 0 1
  } elseif {$mode=="server"} {
    wappInt-start-listener $port 0 0 0
  } else {
    wappInt-start-listener $port 1 1 0
  }
  vwait ::forever
}

# Start up a listening socket.  Arrange to invoke wappInt-new-connection
# for each inbound HTTP connection.
#
#    localonly   -   If true, listen on 127.0.0.1 only
#
#    browser     -   If true, launch a web browser pointing to the new server
#
proc wappInt-start-listener {port localonly browser scgi} {
  if {$scgi} {
    set type SCGI
    set server [list wappInt-new-connection wappInt-scgi-readable]
  } else {
    set type HTTP
    set server [list wappInt-new-connection wappInt-http-readable]
  }
  if {$localonly} {
    set x [socket -server $server -myaddr 127.0.0.1 $port]
  } else {
    set x [socket -server $server $port]
  }
  set coninfo [chan configure $x -sockname]
  set port [lindex $coninfo 2]
  if {$browser} {
    wappInt-start-browser http://127.0.0.1:$port/
  } else {
    puts "Listening for $type requests on TCP port $port"
  }
}

# Start a web-browser and point it at $URL
#
proc wappInt-start-browser {url} {
  global tcl_platform
  if {$tcl_platform(platform)=="windows"} {
    exec cmd /c start $url &
  } elseif {$tcl_platform(os)=="Darwin"} {
    exec open $url &
  } elseif {[catch {exec xdg-open $url}]} {
    exec firefox $url &
  }
}

# Accept a new inbound HTTP request
#
proc wappInt-new-connection {callback chan ip port} {
  upvar #0 wappInt-$chan W
  set W [dict create REMOTE_ADDR $ip REMOTE_PORT $port .header {}]
  fconfigure $chan -blocking 0 -translation binary
  fileevent $chan readable [list $callback $chan]
}

# Close an input channel
#
proc wappInt-close-channel {chan} {
  if {$chan=="stdout"} {
    # This happens after completing a CGI request
    exit 0
  } else {
    unset ::wappInt-$chan
    close $chan
  }
}

# Process new text received on an inbound HTTP request
#
proc wappInt-http-readable {chan} {
  if {[catch [list wappInt-http-readable-unsafe $chan] msg]} {
    puts stderr "$msg\n$::errorInfo"
    wappInt-close-channel $chan
  }
}
proc wappInt-http-readable-unsafe {chan} {
  upvar #0 wappInt-$chan W wapp wapp
  if {![dict exists $W .toread]} {
    # If the .toread key is not set, that means we are still reading
    # the header
    set line [string trimright [gets $chan]]
    set n [string length $line]
    if {$n>0} {
      if {[dict get $W .header]=="" || [regexp {^\s+} $line]} {
        dict append W .header $line
      } else {
        dict append W .header \n$line
      }
      if {[string length [dict get $W .header]]>100000} {
        error "HTTP request header too big - possible DOS attack"
      }
    } elseif {$n==0} {
      # We have reached the blank line that terminates the header.
      if {[wappInt-parse-header $chan]} {
        catch {close $chan}
        return
      }
      set len 0
      if {[dict exists $W CONTENT_LENGTH]} {
        set len [dict get $W CONTENT_LENGTH]
      }
      if {$len>0} {
        # Still need to read the query content
        dict set W .toread $len
      } else {
        # There is no query content, so handle the request immediately
        set wapp $W
        wappInt-handle-request $chan 0
      }
    }
  } else {
    # If .toread is set, that means we are reading the query content.
    # Continue reading until .toread reaches zero.
    set got [read $chan [dict get $W .toread]]
    dict append W CONTENT $got
    dict set W .toread [expr {[dict get $W .toread]-[string length $got]}]
    if {[dict get $W .toread]<=0} {
      # Handle the request as soon as all the query content is received
      set wapp $W
      wappInt-handle-request $chan 0
    }
  }
}

# Decode the HTTP request header.
#
# This routine is always running inside of a [catch], so if
# any problems arise, simply raise an error.
#
proc wappInt-parse-header {chan} {
  upvar #0 wappInt-$chan W
  set hdr [split [dict get $W .header] \n]
  if {$hdr==""} {return 1}
  set req [lindex $hdr 0]
  dict set W REQUEST_METHOD [set method [lindex $req 0]]
  if {[lsearch {GET HEAD POST} $method]<0} {
    error "unsupported request method: \"[dict get $W REQUEST_METHOD]\""
  }
  set uri [lindex $req 1]
  set split_uri [split $uri ?]
  set uri0 [lindex $split_uri 0]
  if {![regexp {^/[-.a-z0-9_/]*$} $uri0]} {
    error "invalid request uri: \"$uri0\""
  }
  dict set W REQUEST_URI $uri0
  dict set W PATH_INFO $uri0
  set uri1 [lindex $split_uri 1]
  dict set W QUERY_STRING $uri1
  set n [llength $hdr]
  for {set i 1} {$i<$n} {incr i} {
    set x [lindex $hdr $i]
    if {![regexp {^(.+): +(.*)$} $x all name value]} {
      error "invalid header line: \"$x\""
    }
    set name [string toupper $name]
    switch -- $name {
      REFERER {set name HTTP_REFERER}
      USER-AGENT {set name HTTP_USER_AGENT}
      CONTENT-LENGTH {set name CONTENT_LENGTH}
      CONTENT-TYPE {set name CONTENT_TYPE}
      HOST {set name HTTP_HOST}
      COOKIE {set name HTTP_COOKIE}
      default {set name .hdr:$name}
    }
    dict set W $name $value
  }
  return 0
}

# Invoke application-supplied methods to generate a reply to
# a single HTTP request.
#
# This routine always runs within [catch], so handle exceptions by
# invoking [error].
#
proc wappInt-handle-request {chan useCgi} {
  global wapp
  dict set wapp .reply {}
  dict set wapp .mimetype {text/html; charset=utf-8}
  dict set wapp .reply-code {200 Ok}

  # Set up additional CGI environment values
  #
  if {![dict exists $wapp HTTP_HOST]} {
    dict set wapp BASE_URL {}
  } elseif {[dict exists $wapp HTTPS]} {
    dict set wapp BASE_URL https://[dict get $wapp HTTP_HOST]
  } else {
    dict set wapp BASE_URL http://[dict get $wapp HTTP_HOST]
  }
  if {![dict exists $wapp REQUEST_URI]} {
    dict set wapp REQUEST_URI /
  } elseif {[regsub {\?.*} [dict get $wapp REQUEST_URI] {} newR]} {
    # Some servers (ex: nginx) append the query parameters to REQUEST_URI.
    # These need to be stripped off
    dict set wapp REQUEST_URI $newR
  }
  if {[dict exists $wapp SCRIPT_NAME]} {
    dict append wapp BASE_URL [dict get $wapp SCRIPT_NAME]
  } else {
    dict set wapp SCRIPT_NAME {}
  }
  if {![dict exists $wapp PATH_INFO]} {
    # If PATH_INFO is missing (ex: nginx) the construct it
    set URI [dict get $wapp REQUEST_URI]
    set skip [string length [dict get $wapp SCRIPT_NAME]]
    dict set wapp PATH_INFO [string range $URI $skip end]
  }
  if {[regexp {^/([^/]+)(.*)$} [dict get $wapp PATH_INFO] all head tail]} {
    dict set wapp PATH_HEAD $head
    dict set wapp PATH_TAIL [string trimleft $tail /]
  } else {
    dict set wapp PATH_INFO {}
    dict set wapp PATH_HEAD {}
    dict set wapp PATH_TAIL {}
  }
  dict set wapp SELF_URL [dict get $wapp BASE_URL]/[dict get $wapp PATH_HEAD]

  # Parse query parameters from the query string, the cookies, and
  # POST data
  #
  if {[dict exists $wapp HTTP_COOKIE]} {
    foreach qterm [split [dict get $wapp HTTP_COOKIE] {;}] {
      set qsplit [split [string trim $qterm] =]
      set nm [lindex $qsplit 0]
      if {[regexp {^[a-z][-a-z0-9_]*$} $nm]} {
        dict set wapp $nm [wappInt-decode-url [lindex $qsplit 1]]
      }
    }
  }
  if {[dict exists $wapp QUERY_STRING]} {
    foreach qterm [split [dict get $wapp QUERY_STRING] &] {
      set qsplit [split $qterm =]
      set nm [lindex $qsplit 0]
      if {[regexp {^[a-z][a-z0-9]*$} $nm]} {
        dict set wapp $nm [wappInt-decode-url [lindex $qsplit 1]]
      }
    }
  }
  # POST data is only decoded if the HTTP_REFERER is from the same
  # application, as a defense against Cross-Site Request Forgery (CSRF)
  # attacks.
  if {[dict exists $wapp CONTENT_TYPE]
   && [dict get $wapp CONTENT_TYPE]=="application/x-www-form-urlencoded"
   && [dict exists $wapp CONTENT]
   && [dict exists $wapp HTTP_REFERER]
   && [string match [dict get $wapp BASE_URL]/* [dict get $wapp HTTP_REFERER]]
  } {
    foreach qterm [split [string trim [dict get $wapp CONTENT]] &] {
      set qsplit [split $qterm =]
      set nm [lindex $qsplit 0]
      if {[regexp {^[a-z][-a-z0-9_]*$} $nm]} {
        dict set wapp $nm [wappInt-decode-url [lindex $qsplit 1]]
      }
    }
  }
  # To-Do:  Perhaps add support for multipart/form-data decoding.
  # Alternatively, perhaps multipart/form-data decoding can be done
  # by application code using a separate helper function, like
  # "wapp_decode_multipart_formdata" or somesuch.

  # Invoke the application-defined handler procedure for this page
  # request.  If an error occurs while running that procedure, generate
  # an HTTP reply that contains the error message.
  #
  set mname [dict get $wapp PATH_HEAD]
  if {[catch {
    if {$mname!="" && [llength [info commands wapp-page-$mname]]>0} {
      wapp-page-$mname
    } else {
      wapp-default
    }
  } msg]} {
    wapp-reset
    wapp-reply-code "500 Internal Server Error"
    wapp-mimetype text/html
    wapp "<h1>Wapp Application Error</h1>\n"
    wapp "<pre>\n"
    wapp-escape-html $::errorInfo
    wapp "</pre>\n"
    dict unset wapp .new-cookies
  }

  # Transmit the HTTP reply
  #
  if {$chan=="stdout"} {
    puts $chan "Status: [dict get $wapp .reply-code]\r"
  } else {
    puts $chan "HTTP/1.0 [dict get $wapp .reply-code]\r"
    puts $chan "Server: wapp\r"
    puts $chan "Content-Length: [string length [dict get $wapp .reply]]\r"
    puts $chan "Connection: Closed\r"
  }
  set mimetype [dict get $wapp .mimetype]
  puts $chan "Content-Type: $mimetype\r"
  if {[dict exists $wapp .new-cookies]} {
    foreach {nm val} [dict get $wapp .new-cookies] {
      if {[regexp {^[a-z][-a-z0-9_]*$} $nm]} {
        set val [wappInt-enc-url $val]
        puts $chan "Set-Cookie: $nm=$val; HttpOnly; Path=/\r"
      }
    }
  }
  puts $chan "\r"
  if {[string match text/* $mimetype]} {
    puts $chan [encoding convertto utf-8 [dict get $wapp .reply]]
  } else {
    puts $chan [dict get $wapp .reply]
  }
  flush $chan
  wappInt-close-channel $chan
}

# Process a single CGI request
#
proc wappInt-handle-cgi-request {} {
  global wapp env
  foreach key {
    CONTENT_LENGTH
    CONTENT_TYPE
    HTTP_COOKIE
    HTTP_HOST
    HTTP_REFERER
    HTTP_USER_AGENT
    PATH_INFO
    QUERY_STRING
    REMOTE_ADDR
    REQUEST_METHOD
    REQUEST_URI
    REMOTE_USER
    SCRIPT_NAME
    SERVER_NAME
    SERVER_PORT
    SERVER_PROTOCOL
  } {
    if {[info exists env($key)]} {
      dict set wapp $key $env($key)
    }
  }
  set len 0
  if {[dict exists $wapp CONTENT_LENGTH]} {
    set len [dict get $wapp CONTENT_LENGTH]
  }
  if {$len>0} {
    fconfigure stdin -translation binary
    dict set wapp CONTENT [read stdin $len]
  }
  wappInt-handle-request stdout 1
}

# Process new text received on an inbound SCGI request
#
proc wappInt-scgi-readable {chan} {
  if {[catch [list wappInt-scgi-readable-unsafe $chan] msg]} {
    puts stderr "$msg\n$::errorInfo"
    wappInt-close-channel $chan
  }
}
proc wappInt-scgi-readable-unsafe {chan} {
  upvar #0 wappInt-$chan W wapp wapp
  if {![dict exists $W .toread]} {
    # If the .toread key is not set, that means we are still reading
    # the header.
    #
    # An SGI header is short.  This implementation assumes the entire
    # header is available all at once.
    #
    set req [read $chan 15]
    set n [string length $req]
    scan $req %d:%s len hdr
    incr len [string length "$len:,"]
    append hdr [read $chan [expr {$len-15}]]
    foreach {nm val} [split $hdr \000] {
      if {$nm==","} break
      dict set W $nm $val
    }
    set len 0
    if {[dict exists $W CONTENT_LENGTH]} {
      set len [dict get $W CONTENT_LENGTH]
    }
    if {$len>0} {
      # Still need to read the query content
      dict set W .toread $len
    } else {
      # There is no query content, so handle the request immediately
      set wapp $W
      wappInt-handle-request $chan 0
    }
  } else {
    # If .toread is set, that means we are reading the query content.
    # Continue reading until .toread reaches zero.
    set got [read $chan [dict get $W .toread]]
    dict append W CONTENT $got
    dict set W .toread [expr {[dict get $W .toread]-[string length $got]}]
    if {[dict get $W .toread]<=0} {
      # Handle the request as soon as all the query content is received
      set wapp $W
      wappInt-handle-request $chan 0
    }
  }
}

# Call this version 1.0
package provide wapp 1.0

# invoked:
#
# DOC              The toplevel directory of the documentation source tree.
#
# SRC              The toplevel directory of the source code source tree.
#
# BLD              The directory in which the current source code has been
#                  built using "make sqlite3.c"
#
# TH3              The toplevel directory for TH3.  May be an empty string.
#
# SLT              The toplevel directory for SQLLogicTest.  May be an
#                  empty string
#
# TCLFLAGS         Extra C-compiler options needed to link against TCL
................................................................................
	cp $(DOC)/search/search.tcl doc/search.d/admin
	chmod +x doc/search.d/admin

fts5ext.so:	$(DOC)/search/fts5ext.c
	gcc -shared -fPIC -I. -DSQLITE_EXT \
		$(DOC)/search/fts5ext.c -o fts5ext.so










always:	

clean:	
	rm -rf $(TCLSH) doc sqlite3.h

# invoked:
#
# DOC              The toplevel directory of the documentation source tree.
#
# SRC              The toplevel directory of the source code source tree.
#
# BLD              The directory in which the current source code has been
#                  built using "make sqlite3.c sqlite3"
#
# TH3              The toplevel directory for TH3.  May be an empty string.
#
# SLT              The toplevel directory for SQLLogicTest.  May be an
#                  empty string
#
# TCLFLAGS         Extra C-compiler options needed to link against TCL
................................................................................
	cp $(DOC)/search/search.tcl doc/search.d/admin
	chmod +x doc/search.d/admin

fts5ext.so:	$(DOC)/search/fts5ext.c
	gcc -shared -fPIC -I. -DSQLITE_EXT \
		$(DOC)/search/fts5ext.c -o fts5ext.so

# Build the "docapp" application by adding an appropriate SQLAR
# repository onto the end of the "sqltclsh" application.  
#
docapp:	doc $(DOC)/docapp/main.tcl $(DOC)/docapp/wapp.tcl $(DOC)/docapp/build.sql
	cp $(DOC)/docapp/main.tcl $(DOC)/docapp/wapp.tcl .
	rm -f docapp
	cp $(BLD)/sqltclsh docapp
	$(BLD)/sqlite3 --append docapp <$(DOC)/docapp/build.sql

always:	

clean:	
	rm -rf $(TCLSH) doc sqlite3.h main.tcl wapp.tcl docapp.sqlar docapp