/*
** 2017-10-11
**
** The author disclaims copyright to this source code.  In place of
** a legal notice, here is a blessing:
**
**    May you do good and not evil.
**    May you find forgiveness for yourself and forgive others.
**    May you share freely, never taking more than you give.
**
******************************************************************************
**
*/

#if !defined(SQLITE_TEST) || defined(SQLITE_OS_UNIX)

#include "sqlite3.h"
#include <string.h>
#include <pthread.h>

/*
** API declarations.
*/
typedef struct Checkpointer Checkpointer;
int sqlite3_bgckpt_create(const char *zFilename, Checkpointer **pp);
int sqlite3_bgckpt_checkpoint(Checkpointer *p, int bBlock);
void sqlite3_bgckpt_destroy(Checkpointer *p);


struct Checkpointer {
  sqlite3 *db;                    /* Database handle */

  pthread_t thread;               /* Background thread */
  pthread_mutex_t mutex;
  pthread_cond_t cond;

  int rc;                         /* Error from "PRAGMA wal_checkpoint" */
  int bCkpt;                      /* True if checkpoint requested */
  int bExit;                      /* True if exit requested */
};

static void *bgckptThreadMain(void *pCtx){
  int rc = SQLITE_OK;
  Checkpointer *p = (Checkpointer*)pCtx;

  while( rc==SQLITE_OK ){
    int bExit;

    pthread_mutex_lock(&p->mutex);
    if( p->bCkpt==0 && p->bExit==0 ){
      pthread_cond_wait(&p->cond, &p->mutex);
    }
    p->bCkpt = 0;
    bExit = p->bExit;
    pthread_mutex_unlock(&p->mutex);

    if( bExit ) break;
    rc = sqlite3_exec(p->db, "PRAGMA wal_checkpoint", 0, 0, 0);
    if( rc==SQLITE_BUSY ){
      rc = SQLITE_OK;
    }
  }

  pthread_mutex_lock(&p->mutex);
  p->rc = rc;
  pthread_mutex_unlock(&p->mutex);
  return 0;
}

void sqlite3_bgckpt_destroy(Checkpointer *p){
  if( p ){
    void *ret = 0;

    /* Signal the background thread to exit */
    pthread_mutex_lock(&p->mutex);
    p->bExit = 1;
    pthread_cond_broadcast(&p->cond);
    pthread_mutex_unlock(&p->mutex);

    pthread_join(p->thread, &ret);
    sqlite3_close(p->db);
    sqlite3_free(p);
  }
}


int sqlite3_bgckpt_create(const char *zFilename, Checkpointer **pp){
  Checkpointer *pNew = 0;
  int rc;

  pNew = (Checkpointer*)sqlite3_malloc(sizeof(Checkpointer));
  if( pNew==0 ){
    rc = SQLITE_NOMEM;
  }else{
    memset(pNew, 0, sizeof(Checkpointer));
    rc = sqlite3_open(zFilename, &pNew->db);
  }

  if( rc==SQLITE_OK ){
    pthread_mutex_init(&pNew->mutex, 0);
    pthread_cond_init(&pNew->cond, 0);
    pthread_create(&pNew->thread, 0, bgckptThreadMain, (void*)pNew);
  }

  if( rc!=SQLITE_OK ){
    sqlite3_bgckpt_destroy(pNew);
    pNew = 0;
  }
  *pp = pNew;
  return rc;
}

int sqlite3_bgckpt_checkpoint(Checkpointer *p, int bBlock){
  int rc;
  pthread_mutex_lock(&p->mutex);
  rc = p->rc;
  if( rc==SQLITE_OK ){
    p->bCkpt = 1;
    pthread_cond_broadcast(&p->cond);
  }
  pthread_mutex_unlock(&p->mutex);
  return rc;
}

#ifdef SQLITE_TEST

#if defined(INCLUDE_SQLITE_TCL_H)
#  include "sqlite_tcl.h"
#else
#  include "tcl.h"
#  ifndef SQLITE_TCLAPI
#    define SQLITE_TCLAPI
#  endif
#endif

const char *sqlite3ErrName(int rc);

static void SQLITE_TCLAPI bgckpt_del(void * clientData){
  Checkpointer *pCkpt = (Checkpointer*)clientData;
  sqlite3_bgckpt_destroy(pCkpt);
}

/*
** Tclcmd: $ckpt SUBCMD ...
*/
static int SQLITE_TCLAPI bgckpt_obj_cmd(
  void * clientData,
  Tcl_Interp *interp,
  int objc,
  Tcl_Obj *CONST objv[]
){
  Checkpointer *pCkpt = (Checkpointer*)clientData;
  const char *aCmd[] = { "checkpoint", "destroy", 0 };
  int iCmd;

  if( objc<2 ){
    Tcl_WrongNumArgs(interp, 1, objv, "SUBCMD ...");
    return TCL_ERROR;
  }

  if( Tcl_GetIndexFromObj(interp, objv[1], aCmd, "sub-command", 0, &iCmd) ){
    return TCL_ERROR;
  }

  switch( iCmd ){
    case 0: {
      int rc;
      int bBlock = 0;

      if( objc>3 ){
        Tcl_WrongNumArgs(interp, 2, objv, "?BLOCKING?");
        return TCL_ERROR;
      }
      if( objc==3 && Tcl_GetBooleanFromObj(interp, objv[2], &bBlock) ){
        return TCL_ERROR;
      }

      rc = sqlite3_bgckpt_checkpoint(pCkpt, bBlock);
      if( rc!=SQLITE_OK ){
        Tcl_SetObjResult(interp, Tcl_NewStringObj(sqlite3ErrName(rc), -1));
        return TCL_ERROR;
      }
      break;
    }

    case 1: {
      Tcl_DeleteCommand(interp, Tcl_GetString(objv[0]));
      break;
    }
  }

  return TCL_OK;
}

/*
** Tclcmd: bgckpt CMDNAME FILENAME
*/
static int SQLITE_TCLAPI bgckpt_cmd(
  void * clientData,
  Tcl_Interp *interp,
  int objc,
  Tcl_Obj *CONST objv[]
){
  const char *zCmd;
  const char *zFilename;
  int rc;
  Checkpointer *pCkpt;

  if( objc!=3 ){
    Tcl_WrongNumArgs(interp, 1, objv, "CMDNAME FILENAME");
    return TCL_ERROR;
  }
  zCmd = Tcl_GetString(objv[1]);
  zFilename = Tcl_GetString(objv[2]);

  rc = sqlite3_bgckpt_create(zFilename, &pCkpt);
  if( rc!=SQLITE_OK ){
    Tcl_SetObjResult(interp, Tcl_NewStringObj(sqlite3ErrName(rc), -1));
    return TCL_ERROR;
  }

  Tcl_CreateObjCommand(interp, zCmd, bgckpt_obj_cmd, (void*)pCkpt, bgckpt_del);
  Tcl_SetObjResult(interp, objv[1]);
  return TCL_OK;
}

int Bgckpt_Init(Tcl_Interp *interp){
  Tcl_CreateObjCommand(interp, "bgckpt", bgckpt_cmd, 0, 0);
  return TCL_OK;
}
#endif   /* SQLITE_TEST */

#else
#if defined(INCLUDE_SQLITE_TCL_H)
#  include "sqlite_tcl.h"
#else
#  include "tcl.h"
#  ifndef SQLITE_TCLAPI
#    define SQLITE_TCLAPI
#  endif
#endif
int Bgckpt_Init(Tcl_Interp *interp){ return TCL_OK; }
#endif

  $(TOP)/src/test_window.c \
  $(TOP)/src/test_wsd.c

# Extensions to be statically loaded.
#
TESTSRC += \
  $(TOP)/ext/misc/amatch.c \

  $(TOP)/ext/misc/carray.c \
  $(TOP)/ext/misc/closure.c \
  $(TOP)/ext/misc/csv.c \
  $(TOP)/ext/misc/eval.c \
  $(TOP)/ext/misc/explain.c \
  $(TOP)/ext/misc/fileio.c \
  $(TOP)/ext/misc/fuzzer.c \

  $(TOP)/src/test_window.c \
  $(TOP)/src/test_wsd.c

# Extensions to be statically loaded.
#
TESTSRC += \
  $(TOP)/ext/misc/amatch.c \
  $(TOP)/ext/misc/bgckpt.c \
  $(TOP)/ext/misc/carray.c \
  $(TOP)/ext/misc/closure.c \
  $(TOP)/ext/misc/csv.c \
  $(TOP)/ext/misc/eval.c \
  $(TOP)/ext/misc/explain.c \
  $(TOP)/ext/misc/fileio.c \
  $(TOP)/ext/misc/fuzzer.c \

    if( page1[18]>1 ){
      pBt->btsFlags |= BTS_READ_ONLY;
    }
    if( page1[19]>1 ){
      goto page1_init_failed;
    }
#else
    if( page1[18]>2 ){
      pBt->btsFlags |= BTS_READ_ONLY;
    }
    if( page1[19]>2 ){
      goto page1_init_failed;
    }

    /* If the write version is set to 2, this database should be accessed
    ** in WAL mode. If the log is not already open, open it now. Then 
    ** return SQLITE_OK and return without populating BtShared.pPage1.
    ** The caller detects this and calls this function again. This is
    ** required as the version of page 1 currently in the page1 buffer
    ** may not be the latest version - there may be a newer one in the log
    ** file.
    */
    if( page1[19]==2 && (pBt->btsFlags & BTS_NO_WAL)==0 ){
      int isOpen = 0;
      rc = sqlite3PagerOpenWal(pBt->pPager, &isOpen);
      if( rc!=SQLITE_OK ){
        goto page1_init_failed;
      }else{
        setDefaultSyncFlag(pBt, SQLITE_DEFAULT_WAL_SYNCHRONOUS+1);
        if( isOpen==0 ){
          releasePageOne(pPage1);
          return SQLITE_OK;
................................................................................
** "write version" (single byte at byte offset 19) fields in the database
** header to iVersion.
*/
int sqlite3BtreeSetVersion(Btree *pBtree, int iVersion){
  BtShared *pBt = pBtree->pBt;
  int rc;                         /* Return code */
 
  assert( iVersion==1 || iVersion==2 );

  /* If setting the version fields to 1, do not automatically open the
  ** WAL connection, even if the version fields are currently set to 2.
  */
  pBt->btsFlags &= ~BTS_NO_WAL;
  if( iVersion==1 ) pBt->btsFlags |= BTS_NO_WAL;

    if( page1[18]>1 ){
      pBt->btsFlags |= BTS_READ_ONLY;
    }
    if( page1[19]>1 ){
      goto page1_init_failed;
    }
#else
    if( page1[18]>3 ){
      pBt->btsFlags |= BTS_READ_ONLY;
    }
    if( page1[19]>3 ){
      goto page1_init_failed;
    }

    /* If the write version is set to 2, this database should be accessed
    ** in WAL mode. If the log is not already open, open it now. Then 
    ** return SQLITE_OK and return without populating BtShared.pPage1.
    ** The caller detects this and calls this function again. This is
    ** required as the version of page 1 currently in the page1 buffer
    ** may not be the latest version - there may be a newer one in the log
    ** file.
    */
    if( page1[19]>=2 && (pBt->btsFlags & BTS_NO_WAL)==0 ){
      int isOpen = 0;
      rc = sqlite3PagerOpenWal(pBt->pPager, (page1[19]==3), &isOpen);
      if( rc!=SQLITE_OK ){
        goto page1_init_failed;
      }else{
        setDefaultSyncFlag(pBt, SQLITE_DEFAULT_WAL_SYNCHRONOUS+1);
        if( isOpen==0 ){
          releasePageOne(pPage1);
          return SQLITE_OK;
................................................................................
** "write version" (single byte at byte offset 19) fields in the database
** header to iVersion.
*/
int sqlite3BtreeSetVersion(Btree *pBtree, int iVersion){
  BtShared *pBt = pBtree->pBt;
  int rc;                         /* Return code */
 
  assert( iVersion==1 || iVersion==2 || iVersion==3 );

  /* If setting the version fields to 1, do not automatically open the
  ** WAL connection, even if the version fields are currently set to 2.
  */
  pBt->btsFlags &= ~BTS_NO_WAL;
  if( iVersion==1 ) pBt->btsFlags |= BTS_NO_WAL;

  /* Access to the unixShmNode object is serialized by the caller */
  pShmNode = pFile->pInode->pShmNode;
  assert( pShmNode->nRef==0 || sqlite3_mutex_held(pShmNode->pShmMutex) );
  assert( pShmNode->nRef>0 || unixMutexHeld() );

  /* Shared locks never span more than one byte */
  assert( n==1 || lockType!=F_RDLCK );

  /* Locks are within range */
  assert( n>=1 && n<=SQLITE_SHM_NLOCK );

  if( pShmNode->hShm>=0 ){
    /* Initialize the locking parameters */
    f.l_type = lockType;
................................................................................
  assert( pShmNode->pInode==pDbFd->pInode );
  assert( ofst>=0 && ofst+n<=SQLITE_SHM_NLOCK );
  assert( n>=1 );
  assert( flags==(SQLITE_SHM_LOCK | SQLITE_SHM_SHARED)
       || flags==(SQLITE_SHM_LOCK | SQLITE_SHM_EXCLUSIVE)
       || flags==(SQLITE_SHM_UNLOCK | SQLITE_SHM_SHARED)
       || flags==(SQLITE_SHM_UNLOCK | SQLITE_SHM_EXCLUSIVE) );
  assert( n==1 || (flags & SQLITE_SHM_EXCLUSIVE)!=0 );
  assert( pShmNode->hShm>=0 || pDbFd->pInode->bProcessLock==1 );
  assert( pShmNode->hShm<0 || pDbFd->pInode->bProcessLock==0 );

  mask = (1<<(ofst+n)) - (1<<ofst);
  assert( n>1 || mask==(1<<ofst) );
  sqlite3_mutex_enter(pShmNode->pShmMutex);
  if( flags & SQLITE_SHM_UNLOCK ){

  /* Access to the unixShmNode object is serialized by the caller */
  pShmNode = pFile->pInode->pShmNode;
  assert( pShmNode->nRef==0 || sqlite3_mutex_held(pShmNode->pShmMutex) );
  assert( pShmNode->nRef>0 || unixMutexHeld() );

  /* Shared locks never span more than one byte */
  /* assert( n==1 || lockType!=F_RDLCK ); */

  /* Locks are within range */
  assert( n>=1 && n<=SQLITE_SHM_NLOCK );

  if( pShmNode->hShm>=0 ){
    /* Initialize the locking parameters */
    f.l_type = lockType;
................................................................................
  assert( pShmNode->pInode==pDbFd->pInode );
  assert( ofst>=0 && ofst+n<=SQLITE_SHM_NLOCK );
  assert( n>=1 );
  assert( flags==(SQLITE_SHM_LOCK | SQLITE_SHM_SHARED)
       || flags==(SQLITE_SHM_LOCK | SQLITE_SHM_EXCLUSIVE)
       || flags==(SQLITE_SHM_UNLOCK | SQLITE_SHM_SHARED)
       || flags==(SQLITE_SHM_UNLOCK | SQLITE_SHM_EXCLUSIVE) );
  /* assert( n==1 || (flags & SQLITE_SHM_EXCLUSIVE)!=0 ); */
  assert( pShmNode->hShm>=0 || pDbFd->pInode->bProcessLock==1 );
  assert( pShmNode->hShm<0 || pDbFd->pInode->bProcessLock==0 );

  mask = (1<<(ofst+n)) - (1<<ofst);
  assert( n>1 || mask==(1<<ofst) );
  sqlite3_mutex_enter(pShmNode->pShmMutex);
  if( flags & SQLITE_SHM_UNLOCK ){

#endif

/*
** The maximum legal page number is (2^31 - 1).
*/
#define PAGER_MAX_PGNO 2147483647

/*
** The argument to this macro is a file descriptor (type sqlite3_file*).
** Return 0 if it is not open, or non-zero (but not 1) if it is.
**
** This is so that expressions can be written as:
**
**   if( isOpen(pPager->jfd) ){ ...
**
** instead of
**
**   if( pPager->jfd->pMethods ){ ...
*/
#define isOpen(pFd) ((pFd)->pMethods!=0)

#ifdef SQLITE_DIRECT_OVERFLOW_READ
/*
** Return true if page pgno can be read directly from the database file
** by the b-tree layer. This is the case if:
**
**   * the database file is open,
**   * there are no dirty pages in the cache, and
................................................................................
        ** a rollback transaction that switches from journal_mode=off
        ** to journal_mode=wal.
        */
        assert( p->eLock>=RESERVED_LOCK );
        assert( isOpen(p->jfd) 
             || p->journalMode==PAGER_JOURNALMODE_OFF 
             || p->journalMode==PAGER_JOURNALMODE_WAL 

        );
      }
      assert( pPager->dbOrigSize==pPager->dbFileSize );
      assert( pPager->dbOrigSize==pPager->dbHintSize );
      break;

    case PAGER_WRITER_DBMOD:
................................................................................
      assert( p->eLock==EXCLUSIVE_LOCK );
      assert( pPager->errCode==SQLITE_OK );
      assert( !pagerUseWal(pPager) );
      assert( p->eLock>=EXCLUSIVE_LOCK );
      assert( isOpen(p->jfd) 
           || p->journalMode==PAGER_JOURNALMODE_OFF 
           || p->journalMode==PAGER_JOURNALMODE_WAL 

           || (sqlite3OsDeviceCharacteristics(p->fd)&SQLITE_IOCAP_BATCH_ATOMIC)
      );
      assert( pPager->dbOrigSize<=pPager->dbHintSize );
      break;

    case PAGER_WRITER_FINISHED:
      assert( p->eLock==EXCLUSIVE_LOCK );
      assert( pPager->errCode==SQLITE_OK );
      assert( !pagerUseWal(pPager) );
      assert( isOpen(p->jfd) 
           || p->journalMode==PAGER_JOURNALMODE_OFF 
           || p->journalMode==PAGER_JOURNALMODE_WAL 

           || (sqlite3OsDeviceCharacteristics(p->fd)&SQLITE_IOCAP_BATCH_ATOMIC)
      );
      break;

    case PAGER_ERROR:
      /* There must be at least one outstanding reference to the pager if
      ** in ERROR state. Otherwise the pager should have already dropped
................................................................................
          ** https://bugzilla.mozilla.org/show_bug.cgi?id=1072773
          */
          rc = sqlite3OsSync(pPager->jfd, pPager->syncFlags);
        }
      }
      pPager->journalOff = 0;
    }else if( pPager->journalMode==PAGER_JOURNALMODE_PERSIST
      || (pPager->exclusiveMode && pPager->journalMode!=PAGER_JOURNALMODE_WAL)
    ){
      rc = zeroJournalHdr(pPager, hasMaster||pPager->tempFile);
      pPager->journalOff = 0;
    }else{
      /* This branch may be executed with Pager.journalMode==MEMORY if
      ** a hot-journal was just rolled back. In this case the journal
      ** file should be closed and deleted. If this connection writes to
      ** the database file, it will do so using an in-memory journal.
      */
      int bDelete = !pPager->tempFile;
      assert( sqlite3JournalIsInMemory(pPager->jfd)==0 );
      assert( pPager->journalMode==PAGER_JOURNALMODE_DELETE 
           || pPager->journalMode==PAGER_JOURNALMODE_MEMORY 
           || pPager->journalMode==PAGER_JOURNALMODE_WAL 

      );
      sqlite3OsClose(pPager->jfd);
      if( bDelete ){
        rc = sqlite3OsDelete(pPager->pVfs, pPager->zJournal, pPager->extraSync);
      }
    }
  }
................................................................................

        rc = pagerPagecount(pPager, &nPage);
        if( rc ) return rc;
        if( nPage==0 ){
          rc = sqlite3OsDelete(pPager->pVfs, pPager->zWal, 0);
        }else{
          testcase( sqlite3PcachePagecount(pPager->pPCache)==0 );
          rc = sqlite3PagerOpenWal(pPager, 0);
        }
      }else if( pPager->journalMode==PAGER_JOURNALMODE_WAL ){
        pPager->journalMode = PAGER_JOURNALMODE_DELETE;
      }
    }
  }
  return rc;
}
#endif
................................................................................

  /* The eMode parameter is always valid */
  assert(      eMode==PAGER_JOURNALMODE_DELETE
            || eMode==PAGER_JOURNALMODE_TRUNCATE
            || eMode==PAGER_JOURNALMODE_PERSIST
            || eMode==PAGER_JOURNALMODE_OFF 
            || eMode==PAGER_JOURNALMODE_WAL 

            || eMode==PAGER_JOURNALMODE_MEMORY );

  /* This routine is only called from the OP_JournalMode opcode, and
  ** the logic there will never allow a temporary file to be changed
  ** to WAL mode.
  */
  assert( pPager->tempFile==0 || eMode!=PAGER_JOURNALMODE_WAL );
................................................................................
    */
    assert( (PAGER_JOURNALMODE_TRUNCATE & 5)==1 );
    assert( (PAGER_JOURNALMODE_PERSIST & 5)==1 );
    assert( (PAGER_JOURNALMODE_DELETE & 5)==0 );
    assert( (PAGER_JOURNALMODE_MEMORY & 5)==4 );
    assert( (PAGER_JOURNALMODE_OFF & 5)==0 );
    assert( (PAGER_JOURNALMODE_WAL & 5)==5 );


    assert( isOpen(pPager->fd) || pPager->exclusiveMode );
    if( !pPager->exclusiveMode && (eOld & 5)==1 && (eMode & 1)==0 ){



      /* In this case we would like to delete the journal file. If it is
      ** not possible, then that is not a problem. Deleting the journal file
      ** here is an optimization only.
      **
      ** Before deleting the journal file, obtain a RESERVED lock on the
      ** database file. This ensures that the journal file is not deleted
................................................................................

/*
** Call sqlite3WalOpen() to open the WAL handle. If the pager is in 
** exclusive-locking mode when this function is called, take an EXCLUSIVE
** lock on the database file and use heap-memory to store the wal-index
** in. Otherwise, use the normal shared-memory.
*/
static int pagerOpenWal(Pager *pPager){
  int rc = SQLITE_OK;

  assert( pPager->pWal==0 && pPager->tempFile==0 );
  assert( pPager->eLock==SHARED_LOCK || pPager->eLock==EXCLUSIVE_LOCK );

  /* If the pager is already in exclusive-mode, the WAL module will use 
  ** heap-memory for the wal-index instead of the VFS shared-memory 
................................................................................

  /* Open the connection to the log file. If this operation fails, 
  ** (e.g. due to malloc() failure), return an error code.
  */
  if( rc==SQLITE_OK ){
    rc = sqlite3WalOpen(pPager->pVfs,
        pPager->fd, pPager->zWal, pPager->exclusiveMode,
        pPager->journalSizeLimit, &pPager->pWal
    );
  }
  pagerFixMaplimit(pPager);

  return rc;
}

................................................................................
**
** If the pager is open on a temp-file (or in-memory database), or if
** the WAL file is already open, set *pbOpen to 1 and return SQLITE_OK
** without doing anything.
*/
int sqlite3PagerOpenWal(
  Pager *pPager,                  /* Pager object */

  int *pbOpen                     /* OUT: Set to true if call is a no-op */
){
  int rc = SQLITE_OK;             /* Return code */

  assert( assert_pager_state(pPager) );
  assert( pPager->eState==PAGER_OPEN   || pbOpen );
  assert( pPager->eState==PAGER_READER || !pbOpen );
................................................................................

  if( !pPager->tempFile && !pPager->pWal ){
    if( !sqlite3PagerWalSupported(pPager) ) return SQLITE_CANTOPEN;

    /* Close any rollback journal previously open */
    sqlite3OsClose(pPager->jfd);

    rc = pagerOpenWal(pPager);
    if( rc==SQLITE_OK ){
      pPager->journalMode = PAGER_JOURNALMODE_WAL;
      pPager->eState = PAGER_OPEN;
    }
  }else{
    *pbOpen = 1;
  }

  return rc;
................................................................................
** EXCLUSIVE lock on the database file. If this cannot be obtained, an
** error (SQLITE_BUSY) is returned and the log connection is not closed.
** If successful, the EXCLUSIVE lock is not released before returning.
*/
int sqlite3PagerCloseWal(Pager *pPager, sqlite3 *db){
  int rc = SQLITE_OK;

  assert( pPager->journalMode==PAGER_JOURNALMODE_WAL );



  /* If the log file is not already open, but does exist in the file-system,
  ** it may need to be checkpointed before the connection can switch to
  ** rollback mode. Open it now so this can happen.
  */
  if( !pPager->pWal ){
    int logexists = 0;
................................................................................
    rc = pagerLockDb(pPager, SHARED_LOCK);
    if( rc==SQLITE_OK ){
      rc = sqlite3OsAccess(
          pPager->pVfs, pPager->zWal, SQLITE_ACCESS_EXISTS, &logexists
      );
    }
    if( rc==SQLITE_OK && logexists ){
      rc = pagerOpenWal(pPager);
    }
  }
    
  /* Checkpoint and close the log. Because an EXCLUSIVE lock is held on
  ** the database file, the log and log-summary files will be deleted.
  */
  if( rc==SQLITE_OK && pPager->pWal ){

#endif

/*
** The maximum legal page number is (2^31 - 1).
*/
#define PAGER_MAX_PGNO 2147483647















#ifdef SQLITE_DIRECT_OVERFLOW_READ
/*
** Return true if page pgno can be read directly from the database file
** by the b-tree layer. This is the case if:
**
**   * the database file is open,
**   * there are no dirty pages in the cache, and
................................................................................
        ** a rollback transaction that switches from journal_mode=off
        ** to journal_mode=wal.
        */
        assert( p->eLock>=RESERVED_LOCK );
        assert( isOpen(p->jfd) 
             || p->journalMode==PAGER_JOURNALMODE_OFF 
             || p->journalMode==PAGER_JOURNALMODE_WAL 
             || p->journalMode==PAGER_JOURNALMODE_WAL2
        );
      }
      assert( pPager->dbOrigSize==pPager->dbFileSize );
      assert( pPager->dbOrigSize==pPager->dbHintSize );
      break;

    case PAGER_WRITER_DBMOD:
................................................................................
      assert( p->eLock==EXCLUSIVE_LOCK );
      assert( pPager->errCode==SQLITE_OK );
      assert( !pagerUseWal(pPager) );
      assert( p->eLock>=EXCLUSIVE_LOCK );
      assert( isOpen(p->jfd) 
           || p->journalMode==PAGER_JOURNALMODE_OFF 
           || p->journalMode==PAGER_JOURNALMODE_WAL 
           || p->journalMode==PAGER_JOURNALMODE_WAL2
           || (sqlite3OsDeviceCharacteristics(p->fd)&SQLITE_IOCAP_BATCH_ATOMIC)
      );
      assert( pPager->dbOrigSize<=pPager->dbHintSize );
      break;

    case PAGER_WRITER_FINISHED:
      assert( p->eLock==EXCLUSIVE_LOCK );
      assert( pPager->errCode==SQLITE_OK );
      assert( !pagerUseWal(pPager) );
      assert( isOpen(p->jfd) 
           || p->journalMode==PAGER_JOURNALMODE_OFF 
           || p->journalMode==PAGER_JOURNALMODE_WAL 
           || p->journalMode==PAGER_JOURNALMODE_WAL2
           || (sqlite3OsDeviceCharacteristics(p->fd)&SQLITE_IOCAP_BATCH_ATOMIC)
      );
      break;

    case PAGER_ERROR:
      /* There must be at least one outstanding reference to the pager if
      ** in ERROR state. Otherwise the pager should have already dropped
................................................................................
          ** https://bugzilla.mozilla.org/show_bug.cgi?id=1072773
          */
          rc = sqlite3OsSync(pPager->jfd, pPager->syncFlags);
        }
      }
      pPager->journalOff = 0;
    }else if( pPager->journalMode==PAGER_JOURNALMODE_PERSIST
      || (pPager->exclusiveMode && pPager->journalMode<PAGER_JOURNALMODE_WAL)
    ){
      rc = zeroJournalHdr(pPager, hasMaster||pPager->tempFile);
      pPager->journalOff = 0;
    }else{
      /* This branch may be executed with Pager.journalMode==MEMORY if
      ** a hot-journal was just rolled back. In this case the journal
      ** file should be closed and deleted. If this connection writes to
      ** the database file, it will do so using an in-memory journal.
      */
      int bDelete = !pPager->tempFile;
      assert( sqlite3JournalIsInMemory(pPager->jfd)==0 );
      assert( pPager->journalMode==PAGER_JOURNALMODE_DELETE 
           || pPager->journalMode==PAGER_JOURNALMODE_MEMORY 
           || pPager->journalMode==PAGER_JOURNALMODE_WAL
           || pPager->journalMode==PAGER_JOURNALMODE_WAL2
      );
      sqlite3OsClose(pPager->jfd);
      if( bDelete ){
        rc = sqlite3OsDelete(pPager->pVfs, pPager->zJournal, pPager->extraSync);
      }
    }
  }
................................................................................

        rc = pagerPagecount(pPager, &nPage);
        if( rc ) return rc;
        if( nPage==0 ){
          rc = sqlite3OsDelete(pPager->pVfs, pPager->zWal, 0);
        }else{
          testcase( sqlite3PcachePagecount(pPager->pPCache)==0 );
          rc = sqlite3PagerOpenWal(pPager, 0, 0);
        }
      }else if( pPager->journalMode>=PAGER_JOURNALMODE_WAL ){
        pPager->journalMode = PAGER_JOURNALMODE_DELETE;
      }
    }
  }
  return rc;
}
#endif
................................................................................

  /* The eMode parameter is always valid */
  assert(      eMode==PAGER_JOURNALMODE_DELETE
            || eMode==PAGER_JOURNALMODE_TRUNCATE
            || eMode==PAGER_JOURNALMODE_PERSIST
            || eMode==PAGER_JOURNALMODE_OFF 
            || eMode==PAGER_JOURNALMODE_WAL 
            || eMode==PAGER_JOURNALMODE_WAL2
            || eMode==PAGER_JOURNALMODE_MEMORY );

  /* This routine is only called from the OP_JournalMode opcode, and
  ** the logic there will never allow a temporary file to be changed
  ** to WAL mode.
  */
  assert( pPager->tempFile==0 || eMode!=PAGER_JOURNALMODE_WAL );
................................................................................
    */
    assert( (PAGER_JOURNALMODE_TRUNCATE & 5)==1 );
    assert( (PAGER_JOURNALMODE_PERSIST & 5)==1 );
    assert( (PAGER_JOURNALMODE_DELETE & 5)==0 );
    assert( (PAGER_JOURNALMODE_MEMORY & 5)==4 );
    assert( (PAGER_JOURNALMODE_OFF & 5)==0 );
    assert( (PAGER_JOURNALMODE_WAL & 5)==5 );
    assert( (PAGER_JOURNALMODE_WAL2 & 5)==4 );

    assert( isOpen(pPager->fd) || pPager->exclusiveMode );
    if( !pPager->exclusiveMode && (eOld & 5)==1 && (eMode & 1)==0 
     && eMode!=PAGER_JOURNALMODE_WAL2       /* TODO: fix this if possible */
    ){

      /* In this case we would like to delete the journal file. If it is
      ** not possible, then that is not a problem. Deleting the journal file
      ** here is an optimization only.
      **
      ** Before deleting the journal file, obtain a RESERVED lock on the
      ** database file. This ensures that the journal file is not deleted
................................................................................

/*
** Call sqlite3WalOpen() to open the WAL handle. If the pager is in 
** exclusive-locking mode when this function is called, take an EXCLUSIVE
** lock on the database file and use heap-memory to store the wal-index
** in. Otherwise, use the normal shared-memory.
*/
static int pagerOpenWal(Pager *pPager, int bWal2){
  int rc = SQLITE_OK;

  assert( pPager->pWal==0 && pPager->tempFile==0 );
  assert( pPager->eLock==SHARED_LOCK || pPager->eLock==EXCLUSIVE_LOCK );

  /* If the pager is already in exclusive-mode, the WAL module will use 
  ** heap-memory for the wal-index instead of the VFS shared-memory 
................................................................................

  /* Open the connection to the log file. If this operation fails, 
  ** (e.g. due to malloc() failure), return an error code.
  */
  if( rc==SQLITE_OK ){
    rc = sqlite3WalOpen(pPager->pVfs,
        pPager->fd, pPager->zWal, pPager->exclusiveMode,
        pPager->journalSizeLimit, bWal2, &pPager->pWal
    );
  }
  pagerFixMaplimit(pPager);

  return rc;
}

................................................................................
**
** If the pager is open on a temp-file (or in-memory database), or if
** the WAL file is already open, set *pbOpen to 1 and return SQLITE_OK
** without doing anything.
*/
int sqlite3PagerOpenWal(
  Pager *pPager,                  /* Pager object */
  int bWal2,                      /* Open in wal2 mode if not already open */
  int *pbOpen                     /* OUT: Set to true if call is a no-op */
){
  int rc = SQLITE_OK;             /* Return code */

  assert( assert_pager_state(pPager) );
  assert( pPager->eState==PAGER_OPEN   || pbOpen );
  assert( pPager->eState==PAGER_READER || !pbOpen );
................................................................................

  if( !pPager->tempFile && !pPager->pWal ){
    if( !sqlite3PagerWalSupported(pPager) ) return SQLITE_CANTOPEN;

    /* Close any rollback journal previously open */
    sqlite3OsClose(pPager->jfd);

    rc = pagerOpenWal(pPager, bWal2);
    if( rc==SQLITE_OK ){
      pPager->journalMode = bWal2?PAGER_JOURNALMODE_WAL2:PAGER_JOURNALMODE_WAL;
      pPager->eState = PAGER_OPEN;
    }
  }else{
    *pbOpen = 1;
  }

  return rc;
................................................................................
** EXCLUSIVE lock on the database file. If this cannot be obtained, an
** error (SQLITE_BUSY) is returned and the log connection is not closed.
** If successful, the EXCLUSIVE lock is not released before returning.
*/
int sqlite3PagerCloseWal(Pager *pPager, sqlite3 *db){
  int rc = SQLITE_OK;

  assert( pPager->journalMode==PAGER_JOURNALMODE_WAL 
       || pPager->journalMode==PAGER_JOURNALMODE_WAL2
  );

  /* If the log file is not already open, but does exist in the file-system,
  ** it may need to be checkpointed before the connection can switch to
  ** rollback mode. Open it now so this can happen.
  */
  if( !pPager->pWal ){
    int logexists = 0;
................................................................................
    rc = pagerLockDb(pPager, SHARED_LOCK);
    if( rc==SQLITE_OK ){
      rc = sqlite3OsAccess(
          pPager->pVfs, pPager->zWal, SQLITE_ACCESS_EXISTS, &logexists
      );
    }
    if( rc==SQLITE_OK && logexists ){
      rc = pagerOpenWal(pPager, 0);
    }
  }
    
  /* Checkpoint and close the log. Because an EXCLUSIVE lock is held on
  ** the database file, the log and log-summary files will be deleted.
  */
  if( rc==SQLITE_OK && pPager->pWal ){

#define PAGER_JOURNALMODE_QUERY     (-1)  /* Query the value of journalmode */
#define PAGER_JOURNALMODE_DELETE      0   /* Commit by deleting journal file */
#define PAGER_JOURNALMODE_PERSIST     1   /* Commit by zeroing journal header */
#define PAGER_JOURNALMODE_OFF         2   /* Journal omitted.  */
#define PAGER_JOURNALMODE_TRUNCATE    3   /* Commit by truncating journal */
#define PAGER_JOURNALMODE_MEMORY      4   /* In-memory journal file */
#define PAGER_JOURNALMODE_WAL         5   /* Use write-ahead logging */


















/*
** Flags that make up the mask passed to sqlite3PagerGet().
*/
#define PAGER_GET_NOCONTENT     0x01  /* Do not load data from disk */
#define PAGER_GET_READONLY      0x02  /* Read-only page is acceptable */

................................................................................
int sqlite3PagerSharedLock(Pager *pPager);


#ifndef SQLITE_OMIT_WAL
  int sqlite3PagerCheckpoint(Pager *pPager, sqlite3*, int, int*, int*);
  int sqlite3PagerWalSupported(Pager *pPager);
  int sqlite3PagerWalCallback(Pager *pPager);
  int sqlite3PagerOpenWal(Pager *pPager, int *pisOpen);
  int sqlite3PagerCloseWal(Pager *pPager, sqlite3*);
# ifdef SQLITE_ENABLE_SNAPSHOT
  int sqlite3PagerSnapshotGet(Pager *pPager, sqlite3_snapshot **ppSnapshot);
  int sqlite3PagerSnapshotOpen(Pager *pPager, sqlite3_snapshot *pSnapshot);
  int sqlite3PagerSnapshotRecover(Pager *pPager);
  int sqlite3PagerSnapshotCheck(Pager *pPager, sqlite3_snapshot *pSnapshot);
  void sqlite3PagerSnapshotUnlock(Pager *pPager);

#define PAGER_JOURNALMODE_QUERY     (-1)  /* Query the value of journalmode */
#define PAGER_JOURNALMODE_DELETE      0   /* Commit by deleting journal file */
#define PAGER_JOURNALMODE_PERSIST     1   /* Commit by zeroing journal header */
#define PAGER_JOURNALMODE_OFF         2   /* Journal omitted.  */
#define PAGER_JOURNALMODE_TRUNCATE    3   /* Commit by truncating journal */
#define PAGER_JOURNALMODE_MEMORY      4   /* In-memory journal file */
#define PAGER_JOURNALMODE_WAL         5   /* Use write-ahead logging */
#define PAGER_JOURNALMODE_WAL2        6   /* Use write-ahead logging mode 2 */

#define isWalMode(x) ((x)==PAGER_JOURNALMODE_WAL || (x)==PAGER_JOURNALMODE_WAL2)

/*
** The argument to this macro is a file descriptor (type sqlite3_file*).
** Return 0 if it is not open, or non-zero (but not 1) if it is.
**
** This is so that expressions can be written as:
**
**   if( isOpen(pPager->jfd) ){ ...
**
** instead of
**
**   if( pPager->jfd->pMethods ){ ...
*/
#define isOpen(pFd) ((pFd)->pMethods!=0)

/*
** Flags that make up the mask passed to sqlite3PagerGet().
*/
#define PAGER_GET_NOCONTENT     0x01  /* Do not load data from disk */
#define PAGER_GET_READONLY      0x02  /* Read-only page is acceptable */

................................................................................
int sqlite3PagerSharedLock(Pager *pPager);


#ifndef SQLITE_OMIT_WAL
  int sqlite3PagerCheckpoint(Pager *pPager, sqlite3*, int, int*, int*);
  int sqlite3PagerWalSupported(Pager *pPager);
  int sqlite3PagerWalCallback(Pager *pPager);
  int sqlite3PagerOpenWal(Pager *pPager, int, int *pisOpen);
  int sqlite3PagerCloseWal(Pager *pPager, sqlite3*);
# ifdef SQLITE_ENABLE_SNAPSHOT
  int sqlite3PagerSnapshotGet(Pager *pPager, sqlite3_snapshot **ppSnapshot);
  int sqlite3PagerSnapshotOpen(Pager *pPager, sqlite3_snapshot *pSnapshot);
  int sqlite3PagerSnapshotRecover(Pager *pPager);
  int sqlite3PagerSnapshotCheck(Pager *pPager, sqlite3_snapshot *pSnapshot);
  void sqlite3PagerSnapshotUnlock(Pager *pPager);

** defined in pager.h. This function returns the associated lowercase
** journal-mode name.
*/
const char *sqlite3JournalModename(int eMode){
  static char * const azModeName[] = {
    "delete", "persist", "off", "truncate", "memory"
#ifndef SQLITE_OMIT_WAL
     , "wal"
#endif
  };
  assert( PAGER_JOURNALMODE_DELETE==0 );
  assert( PAGER_JOURNALMODE_PERSIST==1 );
  assert( PAGER_JOURNALMODE_OFF==2 );
  assert( PAGER_JOURNALMODE_TRUNCATE==3 );
  assert( PAGER_JOURNALMODE_MEMORY==4 );
  assert( PAGER_JOURNALMODE_WAL==5 );

  assert( eMode>=0 && eMode<=ArraySize(azModeName) );

  if( eMode==ArraySize(azModeName) ) return 0;
  return azModeName[eMode];
}

/*

** defined in pager.h. This function returns the associated lowercase
** journal-mode name.
*/
const char *sqlite3JournalModename(int eMode){
  static char * const azModeName[] = {
    "delete", "persist", "off", "truncate", "memory"
#ifndef SQLITE_OMIT_WAL
     , "wal", "wal2"
#endif
  };
  assert( PAGER_JOURNALMODE_DELETE==0 );
  assert( PAGER_JOURNALMODE_PERSIST==1 );
  assert( PAGER_JOURNALMODE_OFF==2 );
  assert( PAGER_JOURNALMODE_TRUNCATE==3 );
  assert( PAGER_JOURNALMODE_MEMORY==4 );
  assert( PAGER_JOURNALMODE_WAL==5 );
  assert( PAGER_JOURNALMODE_WAL2==6 );
  assert( eMode>=0 && eMode<=ArraySize(azModeName) );

  if( eMode==ArraySize(azModeName) ) return 0;
  return azModeName[eMode];
}

/*

#if defined(SQLITE_ENABLE_SESSION) && defined(SQLITE_ENABLE_PREUPDATE_HOOK)
  extern int TestSession_Init(Tcl_Interp*);
#endif
  extern int Md5_Init(Tcl_Interp*);
  extern int Fts5tcl_Init(Tcl_Interp *);
  extern int SqliteRbu_Init(Tcl_Interp*);
  extern int Sqlitetesttcl_Init(Tcl_Interp*);

#if defined(SQLITE_ENABLE_FTS3) || defined(SQLITE_ENABLE_FTS4)
  extern int Sqlitetestfts3_Init(Tcl_Interp *interp);
#endif
#ifdef SQLITE_ENABLE_ZIPVFS
  extern int Zipvfs_Init(Tcl_Interp*);
#endif
  extern int TestExpert_Init(Tcl_Interp*);
................................................................................
  SqlitetestSyscall_Init(interp);
#if defined(SQLITE_ENABLE_SESSION) && defined(SQLITE_ENABLE_PREUPDATE_HOOK)
  TestSession_Init(interp);
#endif
  Fts5tcl_Init(interp);
  SqliteRbu_Init(interp);
  Sqlitetesttcl_Init(interp);



#if defined(SQLITE_ENABLE_FTS3) || defined(SQLITE_ENABLE_FTS4)
  Sqlitetestfts3_Init(interp);
#endif
  TestExpert_Init(interp);
  Sqlitetest_window_Init(interp);

#if defined(SQLITE_ENABLE_SESSION) && defined(SQLITE_ENABLE_PREUPDATE_HOOK)
  extern int TestSession_Init(Tcl_Interp*);
#endif
  extern int Md5_Init(Tcl_Interp*);
  extern int Fts5tcl_Init(Tcl_Interp *);
  extern int SqliteRbu_Init(Tcl_Interp*);
  extern int Sqlitetesttcl_Init(Tcl_Interp*);
  extern int Bgckpt_Init(Tcl_Interp*);
#if defined(SQLITE_ENABLE_FTS3) || defined(SQLITE_ENABLE_FTS4)
  extern int Sqlitetestfts3_Init(Tcl_Interp *interp);
#endif
#ifdef SQLITE_ENABLE_ZIPVFS
  extern int Zipvfs_Init(Tcl_Interp*);
#endif
  extern int TestExpert_Init(Tcl_Interp*);
................................................................................
  SqlitetestSyscall_Init(interp);
#if defined(SQLITE_ENABLE_SESSION) && defined(SQLITE_ENABLE_PREUPDATE_HOOK)
  TestSession_Init(interp);
#endif
  Fts5tcl_Init(interp);
  SqliteRbu_Init(interp);
  Sqlitetesttcl_Init(interp);
  Bgckpt_Init(interp);


#if defined(SQLITE_ENABLE_FTS3) || defined(SQLITE_ENABLE_FTS4)
  Sqlitetestfts3_Init(interp);
#endif
  TestExpert_Init(interp);
  Sqlitetest_window_Init(interp);

  eNew = pOp->p3;
  assert( eNew==PAGER_JOURNALMODE_DELETE 
       || eNew==PAGER_JOURNALMODE_TRUNCATE 
       || eNew==PAGER_JOURNALMODE_PERSIST 
       || eNew==PAGER_JOURNALMODE_OFF
       || eNew==PAGER_JOURNALMODE_MEMORY
       || eNew==PAGER_JOURNALMODE_WAL

       || eNew==PAGER_JOURNALMODE_QUERY
  );
  assert( pOp->p1>=0 && pOp->p1<db->nDb );
  assert( p->readOnly==0 );

  pBt = db->aDb[pOp->p1].pBt;
  pPager = sqlite3BtreePager(pBt);
................................................................................

#ifndef SQLITE_OMIT_WAL
  zFilename = sqlite3PagerFilename(pPager, 1);

  /* Do not allow a transition to journal_mode=WAL for a database
  ** in temporary storage or if the VFS does not support shared memory 
  */
  if( eNew==PAGER_JOURNALMODE_WAL
   && (sqlite3Strlen30(zFilename)==0           /* Temp file */
       || !sqlite3PagerWalSupported(pPager))   /* No shared-memory support */
  ){
    eNew = eOld;
  }

  if( (eNew!=eOld)
   && (eOld==PAGER_JOURNALMODE_WAL || eNew==PAGER_JOURNALMODE_WAL)






  ){




    if( !db->autoCommit || db->nVdbeRead>1 ){
      rc = SQLITE_ERROR;
      sqlite3VdbeError(p,
          "cannot change %s wal mode from within a transaction",
          (eNew==PAGER_JOURNALMODE_WAL ? "into" : "out of")
      );
      goto abort_due_to_error;
    }else{
 

      if( eOld==PAGER_JOURNALMODE_WAL ){
        /* If leaving WAL mode, close the log file. If successful, the call
        ** to PagerCloseWal() checkpoints and deletes the write-ahead-log 
        ** file. An EXCLUSIVE lock may still be held on the database file 
        ** after a successful return. 
        */
        rc = sqlite3PagerCloseWal(pPager, db);
        if( rc==SQLITE_OK ){
          sqlite3PagerSetJournalMode(pPager, eNew);
        }
      }else if( eOld==PAGER_JOURNALMODE_MEMORY ){
        /* Cannot transition directly from MEMORY to WAL.  Use mode OFF
        ** as an intermediate */
        sqlite3PagerSetJournalMode(pPager, PAGER_JOURNALMODE_OFF);
      }
  
      /* Open a transaction on the database file. Regardless of the journal
      ** mode, this transaction always uses a rollback journal.
      */
      assert( sqlite3BtreeIsInTrans(pBt)==0 );
      if( rc==SQLITE_OK ){

        rc = sqlite3BtreeSetVersion(pBt, (eNew==PAGER_JOURNALMODE_WAL ? 2 : 1));
      }


    }
  }
#endif /* ifndef SQLITE_OMIT_WAL */

  if( rc ) eNew = eOld;
  eNew = sqlite3PagerSetJournalMode(pPager, eNew);

  eNew = pOp->p3;
  assert( eNew==PAGER_JOURNALMODE_DELETE 
       || eNew==PAGER_JOURNALMODE_TRUNCATE 
       || eNew==PAGER_JOURNALMODE_PERSIST 
       || eNew==PAGER_JOURNALMODE_OFF
       || eNew==PAGER_JOURNALMODE_MEMORY
       || eNew==PAGER_JOURNALMODE_WAL
       || eNew==PAGER_JOURNALMODE_WAL2
       || eNew==PAGER_JOURNALMODE_QUERY
  );
  assert( pOp->p1>=0 && pOp->p1<db->nDb );
  assert( p->readOnly==0 );

  pBt = db->aDb[pOp->p1].pBt;
  pPager = sqlite3BtreePager(pBt);
................................................................................

#ifndef SQLITE_OMIT_WAL
  zFilename = sqlite3PagerFilename(pPager, 1);

  /* Do not allow a transition to journal_mode=WAL for a database
  ** in temporary storage or if the VFS does not support shared memory 
  */
  if( isWalMode(eNew)
   && (sqlite3Strlen30(zFilename)==0           /* Temp file */
       || !sqlite3PagerWalSupported(pPager))   /* No shared-memory support */
  ){
    eNew = eOld;
  }

  if( eNew!=eOld && (isWalMode(eNew) || isWalMode(eOld)) ){


    /* Prevent changing directly to wal2 from wal mode. And vice versa. */
    if( isWalMode(eNew) && isWalMode(eOld) ){
      rc = SQLITE_ERROR;
      sqlite3VdbeError(p, "cannot change from %s to %s mode",
          sqlite3JournalModename(eOld), sqlite3JournalModename(eNew)
      );
      goto abort_due_to_error;
    }

    /* Prevent switching into or out of wal/wal2 mode mid-transaction */
    if( !db->autoCommit || db->nVdbeRead>1 ){
      rc = SQLITE_ERROR;
      sqlite3VdbeError(p,
          "cannot change %s wal mode from within a transaction",
          (eNew==PAGER_JOURNALMODE_WAL ? "into" : "out of")
      );
      goto abort_due_to_error;

    }
 
    if( isWalMode(eOld) ){
      /* If leaving WAL mode, close the log file. If successful, the call
      ** to PagerCloseWal() checkpoints and deletes the write-ahead-log 
      ** file. An EXCLUSIVE lock may still be held on the database file 
      ** after a successful return. 
      */
      rc = sqlite3PagerCloseWal(pPager, db);
      if( rc==SQLITE_OK ){
        sqlite3PagerSetJournalMode(pPager, eNew);
      }
    }else if( eOld==PAGER_JOURNALMODE_MEMORY ){
      /* Cannot transition directly from MEMORY to WAL.  Use mode OFF
      ** as an intermediate */
      sqlite3PagerSetJournalMode(pPager, PAGER_JOURNALMODE_OFF);
    }

    /* Open a transaction on the database file. Regardless of the journal
    ** mode, this transaction always uses a rollback journal.
    */
    assert( sqlite3BtreeIsInTrans(pBt)==0 );
    if( rc==SQLITE_OK ){
      /* 1==rollback, 2==wal, 3==wal2 */
      rc = sqlite3BtreeSetVersion(pBt, 

          1 + isWalMode(eNew) + (eNew==PAGER_JOURNALMODE_WAL2)
      );
    }
  }
#endif /* ifndef SQLITE_OMIT_WAL */

  if( rc ) eNew = eOld;
  eNew = sqlite3PagerSetJournalMode(pPager, eNew);

** being considered valid at the same time and being checkpointing together
** following a crash.
**
** READER ALGORITHM
**
** To read a page from the database (call it page number P), a reader
** first checks the WAL to see if it contains page P.  If so, then the
** last valid instance of page P that is a followed by a commit frame
** or is a commit frame itself becomes the value read.  If the WAL
** contains no copies of page P that are valid and which are a commit
** frame or are followed by a commit frame, then page P is read from
** the database file.
**
** To start a read transaction, the reader records the index of the last
** valid frame in the WAL.  The reader uses this recorded "mxFrame" value
................................................................................
**
** Note that entries are added in order of increasing K.  Hence, one
** reader might be using some value K0 and a second reader that started
** at a later time (after additional transactions were added to the WAL
** and to the wal-index) might be using a different value K1, where K1>K0.
** Both readers can use the same hash table and mapping section to get
** the correct result.  There may be entries in the hash table with
** K>K0 but to the first reader, those entries will appear to be unused
** slots in the hash table and so the first reader will get an answer as
** if no values greater than K0 had ever been inserted into the hash table
** in the first place - which is what reader one wants.  Meanwhile, the
** second reader using K1 will see additional values that were inserted
** later, which is exactly what reader two wants.  
**
** When a rollback occurs, the value of K is decreased. Hash table entries
** that correspond to frames greater than the new K value are removed
** from the hash table at this point.
*/
































































































































































#ifndef SQLITE_OMIT_WAL

#include "wal.h"

/*
** Trace output macros
*/
................................................................................
# define AtomicStore(PTR,VAL)  __atomic_store_n((PTR),(VAL),__ATOMIC_RELAXED)
#else
# define AtomicLoad(PTR)       (*(PTR))
# define AtomicStore(PTR,VAL)  (*(PTR) = (VAL))
#endif

/*
** The maximum (and only) versions of the wal and wal-index formats
** that may be interpreted by this version of SQLite.
**
** If a client begins recovering a WAL file and finds that (a) the checksum
** values in the wal-header are correct and (b) the version field is not
** WAL_MAX_VERSION, recovery fails and SQLite returns SQLITE_CANTOPEN.
**
** Similarly, if a client successfully reads a wal-index header (i.e. the 
** checksum test is successful) and finds that the version field is not
** WALINDEX_MAX_VERSION, then no read-transaction is opened and SQLite
** returns SQLITE_CANTOPEN.
*/

#define WAL_MAX_VERSION      3007000
#define WALINDEX_MAX_VERSION 3007000

/*
** Index numbers for various locking bytes.   WAL_NREADER is the number
** of available reader locks and should be at least 3.  The default
** is SQLITE_SHM_NLOCK==8 and  WAL_NREADER==5.
**
** Technically, the various VFSes are free to implement these locks however
................................................................................
#define WAL_WRITE_LOCK         0
#define WAL_ALL_BUT_WRITE      1
#define WAL_CKPT_LOCK          1
#define WAL_RECOVER_LOCK       2
#define WAL_READ_LOCK(I)       (3+(I))
#define WAL_NREADER            (SQLITE_SHM_NLOCK-3)































/* Object declarations */
typedef struct WalIndexHdr WalIndexHdr;
typedef struct WalIterator WalIterator;
typedef struct WalCkptInfo WalCkptInfo;


................................................................................
** For all versions of SQLite through 3.10.0 and probably beyond,
** the locking bytes (WalCkptInfo.aLock) start at offset 120 and
** the total header size is 136 bytes.
**
** The szPage value can be any power of 2 between 512 and 32768, inclusive.
** Or it can be 1 to represent a 65536-byte page.  The latter case was
** added in 3.7.1 when support for 64K pages was added.  






*/
struct WalIndexHdr {
  u32 iVersion;                   /* Wal-index version */
  u32 unused;                     /* Unused (padding) field */
  u32 iChange;                    /* Counter incremented each transaction */
  u8 isInit;                      /* 1 when initialized */
  u8 bigEndCksum;                 /* True if checksums in WAL are big-endian */
  u16 szPage;                     /* Database page size in bytes. 1==64K */
  u32 mxFrame;                    /* Index of last valid frame in the WAL */
  u32 nPage;                      /* Size of database in pages */
  u32 aFrameCksum[2];             /* Checksum of last frame in log */
  u32 aSalt[2];                   /* Two salt values copied from WAL header */
  u32 aCksum[2];                  /* Checksum over all prior fields */
};






































/*
** A copy of the following object occurs in the wal-index immediately
** following the second copy of the WalIndexHdr.  This object stores
** information used by checkpoint.
**
** nBackfill is the number of frames in the WAL that have been written
** back into the database. (We call the act of moving content from WAL to
................................................................................
/*
** An open write-ahead log file is represented by an instance of the
** following object.
*/
struct Wal {
  sqlite3_vfs *pVfs;         /* The VFS used to create pDbFd */
  sqlite3_file *pDbFd;       /* File handle for the database file */
  sqlite3_file *pWalFd;      /* File handle for WAL file */
  u32 iCallback;             /* Value to pass to log callback (or 0) */
  i64 mxWalSize;             /* Truncate WAL to this size upon reset */
  int nWiData;               /* Size of array apWiData */
  int szFirstBlock;          /* Size of first block written to WAL file */
  volatile u32 **apWiData;   /* Pointer to wal-index content in memory */
  u32 szPage;                /* Database page size */
  i16 readLock;              /* Which read lock is being held.  -1 for none */
................................................................................
  u8 padToSectorBoundary;    /* Pad transactions out to the next sector */
  u8 bShmUnreliable;         /* SHM content is read-only and unreliable */
  WalIndexHdr hdr;           /* Wal-index header for current transaction */
  u32 minFrame;              /* Ignore wal frames before this one */
  u32 iReCksum;              /* On commit, recalculate checksums from here */
  u32 nPriorFrame;           /* For sqlite3WalInfo() */
  const char *zWalName;      /* Name of WAL file */

  u32 nCkpt;                 /* Checkpoint sequence counter in the wal-header */
#ifdef SQLITE_DEBUG
  u8 lockError;              /* True if a locking error has occurred */
#endif
#ifdef SQLITE_ENABLE_SNAPSHOT
  WalIndexHdr *pSnapshot;    /* Start transaction here if not NULL */
#endif

};

/*
** Candidate values for Wal.exclusiveMode.
*/
#define WAL_NORMAL_MODE     0
#define WAL_EXCLUSIVE_MODE  1     
................................................................................
*/
static void walIndexWriteHdr(Wal *pWal){
  volatile WalIndexHdr *aHdr = walIndexHdr(pWal);
  const int nCksum = offsetof(WalIndexHdr, aCksum);

  assert( pWal->writeLock );
  pWal->hdr.isInit = 1;
  pWal->hdr.iVersion = WALINDEX_MAX_VERSION;
  walChecksumBytes(1, (u8*)&pWal->hdr, nCksum, 0, pWal->hdr.aCksum);
  memcpy((void*)&aHdr[1], (const void*)&pWal->hdr, sizeof(WalIndexHdr));
  walShmBarrier(pWal);
  memcpy((void*)&aHdr[0], (const void*)&pWal->hdr, sizeof(WalIndexHdr));
}

/*
................................................................................
  */
  pgno = sqlite3Get4byte(&aFrame[0]);
  if( pgno==0 ){
    return 0;
  }

  /* A frame is only valid if a checksum of the WAL header,
  ** all prior frams, the first 16 bytes of this frame-header, 
  ** and the frame-data matches the checksum in the last 8 
  ** bytes of this frame-header.
  */
  nativeCksum = (pWal->hdr.bigEndCksum==SQLITE_BIGENDIAN);
  walChecksumBytes(nativeCksum, aFrame, 8, aCksum, aCksum);
  walChecksumBytes(nativeCksum, aData, pWal->szPage, aCksum, aCksum);
  if( aCksum[0]!=sqlite3Get4byte(&aFrame[16]) 
................................................................................
static void walUnlockExclusive(Wal *pWal, int lockIdx, int n){
  if( pWal->exclusiveMode ) return;
  (void)sqlite3OsShmLock(pWal->pDbFd, lockIdx, n,
                         SQLITE_SHM_UNLOCK | SQLITE_SHM_EXCLUSIVE);
  WALTRACE(("WAL%p: release EXCLUSIVE-%s cnt=%d\n", pWal,
             walLockName(lockIdx), n));
}































/*
** Compute a hash on a page number.  The resulting hash value must land
** between 0 and (HASHTABLE_NSLOT-1).  The walHashNext() function advances
** the hash to the next value in the event of a collision.
*/
static int walHash(u32 iPage){
................................................................................
    }else{
      pLoc->iZero = HASHTABLE_NPAGE_ONE + (iHash-1)*HASHTABLE_NPAGE;
    }
    pLoc->aPgno = &pLoc->aPgno[-1];
  }
  return rc;
}






































/*
** Return the number of the wal-index page that contains the hash-table
** and page-number array that contain entries corresponding to WAL frame
** iFrame. The wal-index is broken up into 32KB pages. Wal-index pages 
** are numbered starting from 0.
*/
................................................................................
       && (iHash>=1 || iFrame<=HASHTABLE_NPAGE_ONE)
       && (iHash<=1 || iFrame>(HASHTABLE_NPAGE_ONE+HASHTABLE_NPAGE))
       && (iHash>=2 || iFrame<=HASHTABLE_NPAGE_ONE+HASHTABLE_NPAGE)
       && (iHash<=2 || iFrame>(HASHTABLE_NPAGE_ONE+2*HASHTABLE_NPAGE))
  );
  return iHash;
}

















/*
** Return the page number associated with frame iFrame in this WAL.
*/
static u32 walFramePgno(Wal *pWal, u32 iFrame){
  int iHash = walFramePage(iFrame);
  if( iHash==0 ){
    return pWal->apWiData[0][WALINDEX_HDR_SIZE/sizeof(u32) + iFrame - 1];
  }
  return pWal->apWiData[iHash][(iFrame-1-HASHTABLE_NPAGE_ONE)%HASHTABLE_NPAGE];
}





/*
** Remove entries from the hash table that point to WAL slots greater
** than pWal->hdr.mxFrame.
**
** This function is called whenever pWal->hdr.mxFrame is decreased due
** to a rollback or savepoint.
................................................................................
** actually needed.
*/
static void walCleanupHash(Wal *pWal){
  WalHashLoc sLoc;                /* Hash table location */
  int iLimit = 0;                 /* Zero values greater than this */
  int nByte;                      /* Number of bytes to zero in aPgno[] */
  int i;                          /* Used to iterate through aHash[] */











  assert( pWal->writeLock );
  testcase( pWal->hdr.mxFrame==HASHTABLE_NPAGE_ONE-1 );
  testcase( pWal->hdr.mxFrame==HASHTABLE_NPAGE_ONE );
  testcase( pWal->hdr.mxFrame==HASHTABLE_NPAGE_ONE+1 );

  if( pWal->hdr.mxFrame==0 ) return;

  /* Obtain pointers to the hash-table and page-number array containing 
  ** the entry that corresponds to frame pWal->hdr.mxFrame. It is guaranteed
  ** that the page said hash-table and array reside on is already mapped.
  */
  assert( pWal->nWiData>walFramePage(pWal->hdr.mxFrame) );
  assert( pWal->apWiData[walFramePage(pWal->hdr.mxFrame)] );
  walHashGet(pWal, walFramePage(pWal->hdr.mxFrame), &sLoc);

  /* Zero all hash-table entries that correspond to frame numbers greater
  ** than pWal->hdr.mxFrame.
  */
  iLimit = pWal->hdr.mxFrame - sLoc.iZero;
  assert( iLimit>0 );
  for(i=0; i<HASHTABLE_NSLOT; i++){
    if( sLoc.aHash[i]>iLimit ){
      sLoc.aHash[i] = 0;
    }
  }
  
  /* Zero the entries in the aPgno array that correspond to frames with
  ** frame numbers greater than pWal->hdr.mxFrame. 
  */
  nByte = (int)((char *)sLoc.aHash - (char *)&sLoc.aPgno[iLimit+1]);
  memset((void *)&sLoc.aPgno[iLimit+1], 0, nByte);

#ifdef SQLITE_ENABLE_EXPENSIVE_ASSERT
  /* Verify that the every entry in the mapping region is still reachable
  ** via the hash table even after the cleanup.
  */
................................................................................
      }
      assert( sLoc.aHash[iKey]==j );
    }
  }
#endif /* SQLITE_ENABLE_EXPENSIVE_ASSERT */
}


/*
** Set an entry in the wal-index that will map database page number
** pPage into WAL frame iFrame.
*/
static int walIndexAppend(Wal *pWal, u32 iFrame, u32 iPage){
  int rc;                         /* Return code */
  WalHashLoc sLoc;                /* Wal-index hash table location */









  rc = walHashGet(pWal, walFramePage(iFrame), &sLoc);

  /* Assuming the wal-index file was successfully mapped, populate the
  ** page number array and hash table entry.
  */
  if( rc==SQLITE_OK ){
    int iKey;                     /* Hash table key */
    int idx;                      /* Value to write to hash-table slot */
    int nCollide;                 /* Number of hash collisions */

    idx = iFrame - sLoc.iZero;
    assert( idx <= HASHTABLE_NSLOT/2 + 1 );
    
    /* If this is the first entry to be added to this hash-table, zero the
    ** entire hash table and aPgno[] array before proceeding. 
    */
    if( idx==1 ){
      int nByte = (int)((u8 *)&sLoc.aHash[HASHTABLE_NSLOT]
................................................................................
#endif /* SQLITE_ENABLE_EXPENSIVE_ASSERT */
  }


  return rc;
}
















































































































































/*
** Recover the wal-index by reading the write-ahead log file. 
**
** This routine first tries to establish an exclusive lock on the
** wal-index to prevent other threads/processes from doing anything
** with the WAL or wal-index while recovery is running.  The
** WAL_RECOVER_LOCK is also held so that other threads will know
** that this thread is running recovery.  If unable to establish
** the necessary locks, this routine returns SQLITE_BUSY.
*/
static int walIndexRecover(Wal *pWal){
  int rc;                         /* Return Code */
  i64 nSize;                      /* Size of log file */
  u32 aFrameCksum[2] = {0, 0};
  int iLock;                      /* Lock offset to lock for checkpoint */





  /* Obtain an exclusive lock on all byte in the locking range not already
  ** locked by the caller. The caller is guaranteed to have locked the
  ** WAL_WRITE_LOCK byte, and may have also locked the WAL_CKPT_LOCK byte.
  ** If successful, the same bytes that are locked here are concurrent before
  ** this function returns.
  */
................................................................................
  }
  if( rc ){
    return rc;
  }

  WALTRACE(("WAL%p: recovery begin...\n", pWal));

  memset(&pWal->hdr, 0, sizeof(WalIndexHdr));
























  rc = sqlite3OsFileSize(pWal->pWalFd, &nSize);








  if( rc!=SQLITE_OK ){
    goto recovery_error;


  }

  if( nSize>WAL_HDRSIZE ){
    u8 aBuf[WAL_HDRSIZE];         /* Buffer to load WAL header into */
    u8 *aFrame = 0;               /* Malloc'd buffer to load entire frame */
    int szFrame;                  /* Number of bytes in buffer aFrame[] */
    u8 *aData;                    /* Pointer to data part of aFrame buffer */
    int iFrame;                   /* Index of last frame read */
    i64 iOffset;                  /* Next offset to read from log file */
    int szPage;                   /* Page size according to the log */
    u32 magic;                    /* Magic value read from WAL header */
    u32 version;                  /* Magic value read from WAL header */
    int isValid;                  /* True if this frame is valid */

    /* Read in the WAL header. */
    rc = sqlite3OsRead(pWal->pWalFd, aBuf, WAL_HDRSIZE, 0);
    if( rc!=SQLITE_OK ){
      goto recovery_error;
    }



    /* If the database page size is not a power of two, or is greater than
    ** SQLITE_MAX_PAGE_SIZE, conclude that the WAL file contains no valid 
    ** data. Similarly, if the 'magic' value is invalid, ignore the whole
    ** WAL file.
    */
    magic = sqlite3Get4byte(&aBuf[0]);
    szPage = sqlite3Get4byte(&aBuf[8]);
    if( (magic&0xFFFFFFFE)!=WAL_MAGIC 
     || szPage&(szPage-1) 
     || szPage>SQLITE_MAX_PAGE_SIZE 
     || szPage<512 





    ){
      goto finished;





    }
    pWal->hdr.bigEndCksum = (u8)(magic&0x00000001);
    pWal->szPage = szPage;
    pWal->nCkpt = sqlite3Get4byte(&aBuf[12]);
    memcpy(&pWal->hdr.aSalt, &aBuf[16], 8);


    /* Verify that the WAL header checksum is correct */
    walChecksumBytes(pWal->hdr.bigEndCksum==SQLITE_BIGENDIAN, 
        aBuf, WAL_HDRSIZE-2*4, 0, pWal->hdr.aFrameCksum
    );


    if( pWal->hdr.aFrameCksum[0]!=sqlite3Get4byte(&aBuf[24])
     || pWal->hdr.aFrameCksum[1]!=sqlite3Get4byte(&aBuf[28])
    ){
      goto finished;
    }

    /* Verify that the version number on the WAL format is one that
    ** are able to understand */
    version = sqlite3Get4byte(&aBuf[4]);
    if( version!=WAL_MAX_VERSION ){
      rc = SQLITE_CANTOPEN_BKPT;
      goto finished;
    }

    /* Malloc a buffer to read frames into. */
    szFrame = szPage + WAL_FRAME_HDRSIZE;
    aFrame = (u8 *)sqlite3_malloc64(szFrame);
    if( !aFrame ){
      rc = SQLITE_NOMEM_BKPT;
      goto recovery_error;
    }
    aData = &aFrame[WAL_FRAME_HDRSIZE];

    /* Read all frames from the log file. */
    iFrame = 0;
    for(iOffset=WAL_HDRSIZE; (iOffset+szFrame)<=nSize; iOffset+=szFrame){
      u32 pgno;                   /* Database page number for frame */
      u32 nTruncate;              /* dbsize field from frame header */

      /* Read and decode the next log frame. */
      iFrame++;
      rc = sqlite3OsRead(pWal->pWalFd, aFrame, szFrame, iOffset);
      if( rc!=SQLITE_OK ) break;
      isValid = walDecodeFrame(pWal, &pgno, &nTruncate, aData, aFrame);
      if( !isValid ) break;
      rc = walIndexAppend(pWal, iFrame, pgno);
      if( rc!=SQLITE_OK ) break;

      /* If nTruncate is non-zero, this is a commit record. */
      if( nTruncate ){
        pWal->hdr.mxFrame = iFrame;
        pWal->hdr.nPage = nTruncate;
        pWal->hdr.szPage = (u16)((szPage&0xff00) | (szPage>>16));
        testcase( szPage<=32768 );
        testcase( szPage>=65536 );
        aFrameCksum[0] = pWal->hdr.aFrameCksum[0];
        aFrameCksum[1] = pWal->hdr.aFrameCksum[1];

      }



    }

    sqlite3_free(aFrame);
  }

finished:
  if( rc==SQLITE_OK ){
    volatile WalCkptInfo *pInfo;
    int i;
    pWal->hdr.aFrameCksum[0] = aFrameCksum[0];
    pWal->hdr.aFrameCksum[1] = aFrameCksum[1];
    walIndexWriteHdr(pWal);

    /* Reset the checkpoint-header. This is safe because this thread is 
    ** currently holding locks that exclude all other readers, writers and
    ** checkpointers.
    */
    pInfo = walCkptInfo(pWal);
    pInfo->nBackfill = 0;



    pInfo->nBackfillAttempted = pWal->hdr.mxFrame;
    pInfo->aReadMark[0] = 0;
    for(i=1; i<WAL_NREADER; i++) pInfo->aReadMark[i] = READMARK_NOT_USED;
    if( pWal->hdr.mxFrame ) pInfo->aReadMark[1] = pWal->hdr.mxFrame;


    /* If more than one frame was recovered from the log file, report an
    ** event via sqlite3_log(). This is to help with identifying performance
    ** problems caused by applications routinely shutting down without
    ** checkpointing the log file.
    */
    if( pWal->hdr.nPage ){

      sqlite3_log(SQLITE_NOTICE_RECOVER_WAL,






          "recovered %d frames from WAL file %s",
          pWal->hdr.mxFrame, pWal->zWalName
      );

    }
  }

recovery_error:
  WALTRACE(("WAL%p: recovery %s\n", pWal, rc ? "failed" : "ok"));
  walUnlockExclusive(pWal, iLock, WAL_READ_LOCK(0)-iLock);
  walUnlockExclusive(pWal, WAL_READ_LOCK(1), WAL_NREADER-1);
  return rc;
}

/*
** Close an open wal-index.
*/
static void walIndexClose(Wal *pWal, int isDelete){
  if( pWal->exclusiveMode==WAL_HEAPMEMORY_MODE || pWal->bShmUnreliable ){
    int i;
    for(i=0; i<pWal->nWiData; i++){
      sqlite3_free((void *)pWal->apWiData[i]);
      pWal->apWiData[i] = 0;
    }
  }
  if( pWal->exclusiveMode!=WAL_HEAPMEMORY_MODE ){
    sqlite3OsShmUnmap(pWal->pDbFd, isDelete);
  }


}

/* 
** Open a connection to the WAL file zWalName. The database file must 
** already be opened on connection pDbFd. The buffer that zWalName points
** to must remain valid for the lifetime of the returned Wal* handle.
**
................................................................................
*/
int sqlite3WalOpen(
  sqlite3_vfs *pVfs,              /* vfs module to open wal and wal-index */
  sqlite3_file *pDbFd,            /* The open database file */
  const char *zWalName,           /* Name of the WAL file */
  int bNoShm,                     /* True to run in heap-memory mode */
  i64 mxWalSize,                  /* Truncate WAL to this size on reset */

  Wal **ppWal                     /* OUT: Allocated Wal handle */
){
  int rc;                         /* Return Code */
  Wal *pRet;                      /* Object to allocate and return */
  int flags;                      /* Flags passed to OsOpen() */



  assert( zWalName && zWalName[0] );
  assert( pDbFd );

  /* In the amalgamation, the os_unix.c and os_win.c source files come before
  ** this source file.  Verify that the #defines of the locking byte offsets
  ** in os_unix.c and os_win.c agree with the WALINDEX_LOCK_OFFSET value.
................................................................................
#ifdef WIN_SHM_BASE
  assert( WIN_SHM_BASE==WALINDEX_LOCK_OFFSET );
#endif
#ifdef UNIX_SHM_BASE
  assert( UNIX_SHM_BASE==WALINDEX_LOCK_OFFSET );
#endif




  /* Allocate an instance of struct Wal to return. */
  *ppWal = 0;
  pRet = (Wal*)sqlite3MallocZero(sizeof(Wal) + pVfs->szOsFile);
  if( !pRet ){
    return SQLITE_NOMEM_BKPT;
  }

  pRet->pVfs = pVfs;
  pRet->pWalFd = (sqlite3_file *)&pRet[1];

  pRet->pDbFd = pDbFd;
  pRet->readLock = -1;
  pRet->mxWalSize = mxWalSize;
  pRet->zWalName = zWalName;
  pRet->syncHeader = 1;
  pRet->padToSectorBoundary = 1;
  pRet->exclusiveMode = (bNoShm ? WAL_HEAPMEMORY_MODE: WAL_NORMAL_MODE);







  /* Open file handle on the write-ahead log file. */
  flags = (SQLITE_OPEN_READWRITE|SQLITE_OPEN_CREATE|SQLITE_OPEN_WAL);
  rc = sqlite3OsOpen(pVfs, zWalName, pRet->pWalFd, flags, &flags);
  if( rc==SQLITE_OK && flags&SQLITE_OPEN_READONLY ){
    pRet->readOnly = WAL_RDONLY;
  }

  if( rc!=SQLITE_OK ){
    walIndexClose(pRet, 0);
    sqlite3OsClose(pRet->pWalFd);
    sqlite3_free(pRet);
  }else{
    int iDC = sqlite3OsDeviceCharacteristics(pDbFd);
    if( iDC & SQLITE_IOCAP_SEQUENTIAL ){ pRet->syncHeader = 0; }
    if( iDC & SQLITE_IOCAP_POWERSAFE_OVERWRITE ){
      pRet->padToSectorBoundary = 0;
    }
................................................................................
*/
static void walIteratorFree(WalIterator *p){
  sqlite3_free(p);
}

/*
** Construct a WalInterator object that can be used to loop over all 
** pages in the WAL following frame nBackfill in ascending order. Frames
** nBackfill or earlier may be included - excluding them is an optimization
** only. The caller must hold the checkpoint lock.
**
** On success, make *pp point to the newly allocated WalInterator object
** return SQLITE_OK. Otherwise, return an error code. If this routine
** returns an error, the value of *pp is undefined.
**
** The calling routine should invoke walIteratorFree() to destroy the
** WalIterator object when it has finished with it.
*/
static int walIteratorInit(Wal *pWal, u32 nBackfill, WalIterator **pp){





  WalIterator *p;                 /* Return value */
  int nSegment;                   /* Number of segments to merge */
  u32 iLast;                      /* Last frame in log */
  int nByte;                      /* Number of bytes to allocate */
  int i;                          /* Iterator variable */

  ht_slot *aTmp;                  /* Temp space used by merge-sort */
  int rc = SQLITE_OK;             /* Return Code */





  /* This routine only runs while holding the checkpoint lock. And
  ** it only runs if there is actually content in the log (mxFrame>0).
  */

  assert( pWal->ckptLock && pWal->hdr.mxFrame>0 );
  iLast = pWal->hdr.mxFrame;








  /* Allocate space for the WalIterator object. */
  nSegment = walFramePage(iLast) + 1;
  nByte = sizeof(WalIterator) 
        + (nSegment-1)*sizeof(struct WalSegment)
        + iLast*sizeof(ht_slot);
  p = (WalIterator *)sqlite3_malloc64(nByte);
  if( !p ){
    return SQLITE_NOMEM_BKPT;
  }
................................................................................
  aTmp = (ht_slot *)sqlite3_malloc64(
      sizeof(ht_slot) * (iLast>HASHTABLE_NPAGE?HASHTABLE_NPAGE:iLast)
  );
  if( !aTmp ){
    rc = SQLITE_NOMEM_BKPT;
  }

  for(i=walFramePage(nBackfill+1); rc==SQLITE_OK && i<nSegment; i++){

    WalHashLoc sLoc;

    rc = walHashGet(pWal, i, &sLoc);
    if( rc==SQLITE_OK ){
      int j;                      /* Counter variable */
      int nEntry;                 /* Number of entries in this segment */
      ht_slot *aIndex;            /* Sorted index for this segment */










      sLoc.aPgno++;
      if( (i+1)==nSegment ){

        nEntry = (int)(iLast - sLoc.iZero);
      }else{
        nEntry = (int)((u32*)sLoc.aHash - (u32*)sLoc.aPgno);
      }
      aIndex = &((ht_slot *)&p->aSegment[p->nSegment])[sLoc.iZero];
      sLoc.iZero++;
  
      for(j=0; j<nEntry; j++){
        aIndex[j] = (ht_slot)j;
      }
      walMergesort((u32 *)sLoc.aPgno, aTmp, aIndex, &nEntry);
      p->aSegment[i].iZero = sLoc.iZero;
      p->aSegment[i].nEntry = nEntry;
      p->aSegment[i].aIndex = aIndex;
      p->aSegment[i].aPgno = (u32 *)sLoc.aPgno;
    }
  }
  sqlite3_free(aTmp);

  if( rc!=SQLITE_OK ){
    walIteratorFree(p);
    p = 0;
................................................................................
** new wal-index header. It should be passed a pseudo-random value (i.e. 
** one obtained from sqlite3_randomness()).
*/
static void walRestartHdr(Wal *pWal, u32 salt1){
  volatile WalCkptInfo *pInfo = walCkptInfo(pWal);
  int i;                          /* Loop counter */
  u32 *aSalt = pWal->hdr.aSalt;   /* Big-endian salt values */

  pWal->nCkpt++;
  pWal->hdr.mxFrame = 0;
  sqlite3Put4byte((u8*)&aSalt[0], 1 + sqlite3Get4byte((u8*)&aSalt[0]));
  memcpy(&pWal->hdr.aSalt[1], &salt1, 4);
  walIndexWriteHdr(pWal);
  pInfo->nBackfill = 0;
  pInfo->nBackfillAttempted = 0;
................................................................................
  WalIterator *pIter = 0;         /* Wal iterator context */
  u32 iDbpage = 0;                /* Next database page to write */
  u32 iFrame = 0;                 /* Wal frame containing data for iDbpage */
  u32 mxSafeFrame;                /* Max frame that can be backfilled */
  u32 mxPage;                     /* Max database page to write */
  int i;                          /* Loop counter */
  volatile WalCkptInfo *pInfo;    /* The checkpoint status information */




  szPage = walPagesize(pWal);
  testcase( szPage<=32768 );
  testcase( szPage>=65536 );
  pInfo = walCkptInfo(pWal);

  if( pInfo->nBackfill<pWal->hdr.mxFrame ){












    /* EVIDENCE-OF: R-62920-47450 The busy-handler callback is never invoked
    ** in the SQLITE_CHECKPOINT_PASSIVE mode. */
    assert( eMode!=SQLITE_CHECKPOINT_PASSIVE || xBusy==0 );

    /* Compute in mxSafeFrame the index of the last frame of the WAL that is
    ** safe to write into the database.  Frames beyond mxSafeFrame might
    ** overwrite database pages that are in use by active readers and thus
    ** cannot be backfilled from the WAL.
    */

    mxSafeFrame = pWal->hdr.mxFrame;
    mxPage = pWal->hdr.nPage;
    for(i=1; i<WAL_NREADER; i++){
      /* Thread-sanitizer reports that the following is an unsafe read,
      ** as some other thread may be in the process of updating the value
      ** of the aReadMark[] slot. The assumption here is that if that is
      ** happening, the other client may only be increasing the value,
      ** not decreasing it. So assuming either that either the "old" or
      ** "new" version of the value is read, and not some arbitrary value
      ** that would never be written by a real client, things are still 
      ** safe.  */
      u32 y = pInfo->aReadMark[i];
      if( mxSafeFrame>y ){
        assert( y<=pWal->hdr.mxFrame );
        rc = walBusyLock(pWal, xBusy, pBusyArg, WAL_READ_LOCK(i), 1);
        if( rc==SQLITE_OK ){
          pInfo->aReadMark[i] = (i==1 ? mxSafeFrame : READMARK_NOT_USED);
          walUnlockExclusive(pWal, WAL_READ_LOCK(i), 1);
        }else if( rc==SQLITE_BUSY ){
          mxSafeFrame = y;
          xBusy = 0;
        }else{
          goto walcheckpoint_out;
        }
      }
    }


    /* Allocate the iterator */
    if( pInfo->nBackfill<mxSafeFrame ){

      rc = walIteratorInit(pWal, pInfo->nBackfill, &pIter);
      assert( rc==SQLITE_OK || pIter==0 );
    }

    if( pIter
     && (rc = walBusyLock(pWal, xBusy, pBusyArg, WAL_READ_LOCK(0),1))==SQLITE_OK
    ){
      u32 nBackfill = pInfo->nBackfill;


      pInfo->nBackfillAttempted = mxSafeFrame;

      /* Sync the WAL to disk */

      rc = sqlite3OsSync(pWal->pWalFd, CKPT_SYNC_FLAGS(sync_flags));

      /* If the database may grow as a result of this checkpoint, hint
      ** about the eventual size of the db file to the VFS layer.
      */
      if( rc==SQLITE_OK ){
        i64 nReq = ((i64)mxPage * szPage);
        i64 nSize;                    /* Current size of database file */
        rc = sqlite3OsFileSize(pWal->pDbFd, &nSize);
        if( rc==SQLITE_OK && nSize<nReq ){
          sqlite3OsFileControlHint(pWal->pDbFd, SQLITE_FCNTL_SIZE_HINT, &nReq);
        }
      }


      /* Iterate through the contents of the WAL, copying data to the db file */
      while( rc==SQLITE_OK && 0==walIteratorNext(pIter, &iDbpage, &iFrame) ){
        i64 iOffset;

        assert( walFramePgno(pWal, iFrame)==iDbpage );


        if( db->u1.isInterrupted ){
          rc = db->mallocFailed ? SQLITE_NOMEM_BKPT : SQLITE_INTERRUPT;
          break;
        }
        if( iFrame<=nBackfill || iFrame>mxSafeFrame || iDbpage>mxPage ){

          continue;
        }
        iOffset = walFrameOffset(iFrame, szPage) + WAL_FRAME_HDRSIZE;



        /* testcase( IS_BIG_INT(iOffset) ); // requires a 4GiB WAL file */
        rc = sqlite3OsRead(pWal->pWalFd, zBuf, szPage, iOffset);
        if( rc!=SQLITE_OK ) break;
        iOffset = (iDbpage-1)*(i64)szPage;
        testcase( IS_BIG_INT(iOffset) );
        rc = sqlite3OsWrite(pWal->pDbFd, zBuf, szPage, iOffset);
        if( rc!=SQLITE_OK ) break;
      }

      /* If work was actually accomplished... */
      if( rc==SQLITE_OK ){
        if( mxSafeFrame==walIndexHdr(pWal)->mxFrame ){

          i64 szDb = pWal->hdr.nPage*(i64)szPage;
          testcase( IS_BIG_INT(szDb) );
          rc = sqlite3OsTruncate(pWal->pDbFd, szDb);

          if( rc==SQLITE_OK ){
            rc = sqlite3OsSync(pWal->pDbFd, CKPT_SYNC_FLAGS(sync_flags));
          }
        }
        if( rc==SQLITE_OK ){
          pInfo->nBackfill = mxSafeFrame;
        }
      }

      /* Release the reader lock held while backfilling */
      walUnlockExclusive(pWal, WAL_READ_LOCK(0), 1);
    }

    if( rc==SQLITE_BUSY ){
      /* Reset the return code so as not to report a checkpoint failure
      ** just because there are active readers.  */
      rc = SQLITE_OK;
    }
................................................................................
  }

  /* If this is an SQLITE_CHECKPOINT_RESTART or TRUNCATE operation, and the
  ** entire wal file has been copied into the database file, then block 
  ** until all readers have finished using the wal file. This ensures that 
  ** the next process to write to the database restarts the wal file.
  */
  if( rc==SQLITE_OK && eMode!=SQLITE_CHECKPOINT_PASSIVE ){
    assert( pWal->writeLock );
    if( pInfo->nBackfill<pWal->hdr.mxFrame ){
      rc = SQLITE_BUSY;
    }else if( eMode>=SQLITE_CHECKPOINT_RESTART ){
      u32 salt1;
      sqlite3_randomness(4, &salt1);
      assert( pInfo->nBackfill==pWal->hdr.mxFrame );
................................................................................
          ** writer clients should see that the entire log file has been
          ** checkpointed and behave accordingly. This seems unsafe though,
          ** as it would leave the system in a state where the contents of
          ** the wal-index header do not match the contents of the 
          ** file-system. To avoid this, update the wal-index header to
          ** indicate that the log file contains zero valid frames.  */
          walRestartHdr(pWal, salt1);
          rc = sqlite3OsTruncate(pWal->pWalFd, 0);
        }
        walUnlockExclusive(pWal, WAL_READ_LOCK(1), WAL_NREADER-1);
      }
    }
  }

 walcheckpoint_out:
................................................................................
}

/*
** If the WAL file is currently larger than nMax bytes in size, truncate
** it to exactly nMax bytes. If an error occurs while doing so, ignore it.
*/
static void walLimitSize(Wal *pWal, i64 nMax){

  i64 sz;
  int rx;
  sqlite3BeginBenignMalloc();
  rx = sqlite3OsFileSize(pWal->pWalFd, &sz);
  if( rx==SQLITE_OK && (sz > nMax ) ){
    rx = sqlite3OsTruncate(pWal->pWalFd, nMax);
  }
  sqlite3EndBenignMalloc();
  if( rx ){
    sqlite3_log(rx, "cannot limit WAL size: %s", pWal->zWalName);

  }
}

/*
** Close a connection to a log file.
*/
int sqlite3WalClose(
................................................................................
    ** the wal and wal-index files.
    **
    ** The EXCLUSIVE lock is not released before returning.
    */
    if( zBuf!=0
     && SQLITE_OK==(rc = sqlite3OsLock(pWal->pDbFd, SQLITE_LOCK_EXCLUSIVE))
    ){

      if( pWal->exclusiveMode==WAL_NORMAL_MODE ){
        pWal->exclusiveMode = WAL_EXCLUSIVE_MODE;
      }

      rc = sqlite3WalCheckpoint(pWal, db, 
          SQLITE_CHECKPOINT_PASSIVE, 0, 0, sync_flags, nBuf, zBuf, 0, 0
      );
      if( rc==SQLITE_OK ){
        int bPersist = -1;
        sqlite3OsFileControlHint(
            pWal->pDbFd, SQLITE_FCNTL_PERSIST_WAL, &bPersist
        );
        if( bPersist!=1 ){
          /* Try to delete the WAL file if the checkpoint completed and
          ** fsyned (rc==SQLITE_OK) and if we are not in persistent-wal
          ** mode (!bPersist) */
          isDelete = 1;
        }else if( pWal->mxWalSize>=0 ){
          /* Try to truncate the WAL file to zero bytes if the checkpoint
          ** completed and fsynced (rc==SQLITE_OK) and we are in persistent
          ** WAL mode (bPersist) and if the PRAGMA journal_size_limit is a
          ** non-negative value (pWal->mxWalSize>=0).  Note that we truncate
          ** to zero bytes as truncating to the journal_size_limit might
          ** leave a corrupt WAL file on disk. */
          walLimitSize(pWal, 0);
        }









      }
    }

    walIndexClose(pWal, isDelete);
    sqlite3OsClose(pWal->pWalFd);
    if( isDelete ){
      sqlite3BeginBenignMalloc();
      sqlite3OsDelete(pWal->pVfs, pWal->zWalName, 0);

      sqlite3EndBenignMalloc();
    }
    WALTRACE(("WAL%p: closed\n", pWal));
    sqlite3_free((void *)pWal->apWiData);
    sqlite3_free(pWal);
  }
  return rc;
................................................................................
    }
  }

  /* If the header is read successfully, check the version number to make
  ** sure the wal-index was not constructed with some future format that
  ** this version of SQLite cannot understand.
  */

  if( badHdr==0 && pWal->hdr.iVersion!=WALINDEX_MAX_VERSION ){

    rc = SQLITE_CANTOPEN_BKPT;
  }
  if( pWal->bShmUnreliable ){
    if( rc!=SQLITE_OK ){
      walIndexClose(pWal, 0);
      pWal->bShmUnreliable = 0;
      assert( pWal->nWiData>0 && pWal->apWiData[0]==0 );
................................................................................
  ** into pWal->hdr.
  */
  memcpy(&pWal->hdr, (void*)walIndexHdr(pWal), sizeof(WalIndexHdr));

  /* Make sure some writer hasn't come in and changed the WAL file out
  ** from under us, then disconnected, while we were not looking.
  */
  rc = sqlite3OsFileSize(pWal->pWalFd, &szWal);
  if( rc!=SQLITE_OK ){
    goto begin_unreliable_shm_out;
  }
  if( szWal<WAL_HDRSIZE ){
    /* If the wal file is too small to contain a wal-header and the
    ** wal-index header has mxFrame==0, then it must be safe to proceed
    ** reading the database file only. However, the page cache cannot
................................................................................
    ** since this client's last read transaction.  */
    *pChanged = 1;
    rc = (pWal->hdr.mxFrame==0 ? SQLITE_OK : WAL_RETRY);
    goto begin_unreliable_shm_out;
  }

  /* Check the salt keys at the start of the wal file still match. */
  rc = sqlite3OsRead(pWal->pWalFd, aBuf, WAL_HDRSIZE, 0);
  if( rc!=SQLITE_OK ){
    goto begin_unreliable_shm_out;
  }
  if( memcmp(&pWal->hdr.aSalt, &aBuf[16], 8) ){
    /* Some writer has wrapped the WAL file while we were not looking.
    ** Return WAL_RETRY which will cause the in-memory WAL-index to be
    ** rebuilt. */
................................................................................
      iOffset+szFrame<=szWal; 
      iOffset+=szFrame
  ){
    u32 pgno;                   /* Database page number for frame */
    u32 nTruncate;              /* dbsize field from frame header */

    /* Read and decode the next log frame. */
    rc = sqlite3OsRead(pWal->pWalFd, aFrame, szFrame, iOffset);
    if( rc!=SQLITE_OK ) break;
    if( !walDecodeFrame(pWal, &pgno, &nTruncate, aData, aFrame) ) break;

    /* If nTruncate is non-zero, then a complete transaction has been
    ** appended to this wal file. Set rc to WAL_RETRY and break out of
    ** the loop.  */
    if( nTruncate ){
................................................................................
** checkpoint process do as much work as possible.  This routine might
** update values of the aReadMark[] array in the header, but if it does
** so it takes care to hold an exclusive lock on the corresponding
** WAL_READ_LOCK() while changing values.
*/
static int walTryBeginRead(Wal *pWal, int *pChanged, int useWal, int cnt){
  volatile WalCkptInfo *pInfo;    /* Checkpoint information in wal-index */
  u32 mxReadMark;                 /* Largest aReadMark[] value */
  int mxI;                        /* Index of largest aReadMark[] value */
  int i;                          /* Loop counter */
  int rc = SQLITE_OK;             /* Return code  */
  u32 mxFrame;                    /* Wal frame to lock to */

  assert( pWal->readLock<0 );     /* Not currently locked */

  /* useWal may only be set for read/write connections */
  assert( (pWal->readOnly & WAL_SHM_RDONLY)==0 || useWal==0 );

  /* Take steps to avoid spinning forever if there is a protocol error.
  **
  ** Circumstances that cause a RETRY should only last for the briefest
................................................................................
      return walBeginShmUnreliable(pWal, pChanged);
    }
  }

  assert( pWal->nWiData>0 );
  assert( pWal->apWiData[0]!=0 );
  pInfo = walCkptInfo(pWal);























  if( !useWal && pInfo->nBackfill==pWal->hdr.mxFrame
#ifdef SQLITE_ENABLE_SNAPSHOT
   && (pWal->pSnapshot==0 || pWal->hdr.mxFrame==0)
#endif
  ){
    /* The WAL has been completely backfilled (or it is empty).
    ** and can be safely ignored.
    */
    rc = walLockShared(pWal, WAL_READ_LOCK(0));
    walShmBarrier(pWal);
    if( rc==SQLITE_OK ){
      if( memcmp((void *)walIndexHdr(pWal), &pWal->hdr, sizeof(WalIndexHdr)) ){
        /* It is not safe to allow the reader to continue here if frames
        ** may have been appended to the log before READ_LOCK(0) was obtained.
        ** When holding READ_LOCK(0), the reader ignores the entire log file,
        ** which implies that the database file contains a trustworthy
        ** snapshot. Since holding READ_LOCK(0) prevents a checkpoint from
        ** happening, this is usually correct.
        **
        ** However, if frames have been appended to the log (or if the log 
        ** is wrapped and written for that matter) before the READ_LOCK(0)
        ** is obtained, that is not necessarily true. A checkpointer may
        ** have started to backfill the appended frames but crashed before
        ** it finished. Leaving a corrupt image in the database file.
        */
        walUnlockShared(pWal, WAL_READ_LOCK(0));
        return WAL_RETRY;
      }
      pWal->readLock = 0;
      return SQLITE_OK;
    }else if( rc!=SQLITE_BUSY ){
      return rc;
    }
  }

  /* If we get this far, it means that the reader will want to use
  ** the WAL to get at content from recent commits.  The job now is
  ** to select one of the aReadMark[] entries that is closest to
  ** but not exceeding pWal->hdr.mxFrame and lock that entry.
  */
  mxReadMark = 0;
  mxI = 0;
  mxFrame = pWal->hdr.mxFrame;
#ifdef SQLITE_ENABLE_SNAPSHOT
  if( pWal->pSnapshot && pWal->pSnapshot->mxFrame<mxFrame ){
    mxFrame = pWal->pSnapshot->mxFrame;
  }
#endif
  for(i=1; i<WAL_NREADER; i++){
    u32 thisMark = AtomicLoad(pInfo->aReadMark+i);
    if( mxReadMark<=thisMark && thisMark<=mxFrame ){
      assert( thisMark!=READMARK_NOT_USED );
      mxReadMark = thisMark;
      mxI = i;
    }
  }
  if( (pWal->readOnly & WAL_SHM_RDONLY)==0
   && (mxReadMark<mxFrame || mxI==0)
  ){
    for(i=1; i<WAL_NREADER; i++){
      rc = walLockExclusive(pWal, WAL_READ_LOCK(i), 1);
      if( rc==SQLITE_OK ){
        mxReadMark = AtomicStore(pInfo->aReadMark+i,mxFrame);
        mxI = i;
        walUnlockExclusive(pWal, WAL_READ_LOCK(i), 1);
        break;
      }else if( rc!=SQLITE_BUSY ){
        return rc;
      }
    }
  }
  if( mxI==0 ){
    assert( rc==SQLITE_BUSY || (pWal->readOnly & WAL_SHM_RDONLY)!=0 );
    return rc==SQLITE_BUSY ? WAL_RETRY : SQLITE_READONLY_CANTINIT;
  }

  rc = walLockShared(pWal, WAL_READ_LOCK(mxI));
  if( rc ){
    return rc==SQLITE_BUSY ? WAL_RETRY : rc;
  }
  /* Now that the read-lock has been obtained, check that neither the
  ** value in the aReadMark[] array or the contents of the wal-index
  ** header have changed.
  **
  ** It is necessary to check that the wal-index header did not change
  ** between the time it was read and when the shared-lock was obtained
  ** on WAL_READ_LOCK(mxI) was obtained to account for the possibility
  ** that the log file may have been wrapped by a writer, or that frames
  ** that occur later in the log than pWal->hdr.mxFrame may have been
  ** copied into the database by a checkpointer. If either of these things
  ** happened, then reading the database with the current value of
  ** pWal->hdr.mxFrame risks reading a corrupted snapshot. So, retry
  ** instead.
  **
  ** Before checking that the live wal-index header has not changed
  ** since it was read, set Wal.minFrame to the first frame in the wal
  ** file that has not yet been checkpointed. This client will not need
  ** to read any frames earlier than minFrame from the wal file - they
  ** can be safely read directly from the database file.
  **
  ** Because a ShmBarrier() call is made between taking the copy of 
  ** nBackfill and checking that the wal-header in shared-memory still
  ** matches the one cached in pWal->hdr, it is guaranteed that the 
  ** checkpointer that set nBackfill was not working with a wal-index
  ** header newer than that cached in pWal->hdr. If it were, that could
  ** cause a problem. The checkpointer could omit to checkpoint
  ** a version of page X that lies before pWal->minFrame (call that version
  ** A) on the basis that there is a newer version (version B) of the same
  ** page later in the wal file. But if version B happens to like past
  ** frame pWal->hdr.mxFrame - then the client would incorrectly assume
  ** that it can read version A from the database file. However, since
  ** we can guarantee that the checkpointer that set nBackfill could not
  ** see any pages past pWal->hdr.mxFrame, this problem does not come up.
  */
  pWal->minFrame = AtomicLoad(&pInfo->nBackfill)+1;
  walShmBarrier(pWal);
  if( AtomicLoad(pInfo->aReadMark+mxI)!=mxReadMark
   || memcmp((void *)walIndexHdr(pWal), &pWal->hdr, sizeof(WalIndexHdr))
  ){
    walUnlockShared(pWal, WAL_READ_LOCK(mxI));
    return WAL_RETRY;
  }else{
    assert( mxReadMark<=pWal->hdr.mxFrame );
    pWal->readLock = (i16)mxI;

  }
  return rc;
}

#ifdef SQLITE_ENABLE_SNAPSHOT
/*
** Attempt to reduce the value of the WalCkptInfo.nBackfillAttempted 
................................................................................
          rc = walHashGet(pWal, walFramePage(i), &sLoc);
          if( rc!=SQLITE_OK ) break;
          pgno = sLoc.aPgno[i-sLoc.iZero];
          iDbOff = (i64)(pgno-1) * szPage;

          if( iDbOff+szPage<=szDb ){
            iWalOff = walFrameOffset(i, szPage) + WAL_FRAME_HDRSIZE;
            rc = sqlite3OsRead(pWal->pWalFd, pBuf1, szPage, iWalOff);

            if( rc==SQLITE_OK ){
              rc = sqlite3OsRead(pWal->pDbFd, pBuf2, szPage, iDbOff);
            }

            if( rc!=SQLITE_OK || 0==memcmp(pBuf1, pBuf2, szPage) ){
              break;
................................................................................
  do{
    rc = walTryBeginRead(pWal, pChanged, 0, ++cnt);
  }while( rc==WAL_RETRY );
  testcase( (rc&0xff)==SQLITE_BUSY );
  testcase( (rc&0xff)==SQLITE_IOERR );
  testcase( rc==SQLITE_PROTOCOL );
  testcase( rc==SQLITE_OK );





  pWal->nPriorFrame = pWal->hdr.mxFrame;
#ifdef SQLITE_ENABLE_SNAPSHOT
  if( rc==SQLITE_OK ){
    if( pSnapshot && memcmp(pSnapshot, &pWal->hdr, sizeof(WalIndexHdr))!=0 ){
      /* At this point the client has a lock on an aReadMark[] slot holding
      ** a value equal to or smaller than pSnapshot->mxFrame, but pWal->hdr
................................................................................

/*
** Finish with a read transaction.  All this does is release the
** read-lock.
*/
void sqlite3WalEndReadTransaction(Wal *pWal){
  sqlite3WalEndWriteTransaction(pWal);
  if( pWal->readLock>=0 ){



    walUnlockShared(pWal, WAL_READ_LOCK(pWal->readLock));

    pWal->readLock = -1;
  }
}





















































































/*
** Search the wal file for page pgno. If found, set *piRead to the frame that
** contains the page. Otherwise, if pgno is not in the wal file, set *piRead
** to zero.
**
** Return SQLITE_OK if successful, or an error code if an error occurs. If an
................................................................................
** error does occur, the final value of *piRead is undefined.
*/
int sqlite3WalFindFrame(
  Wal *pWal,                      /* WAL handle */
  Pgno pgno,                      /* Database page number to read data for */
  u32 *piRead                     /* OUT: Frame number (or zero) */
){



  u32 iRead = 0;                  /* If !=0, WAL frame to return data from */
  u32 iLast = pWal->hdr.mxFrame;  /* Last page in WAL for this reader */
  int iHash;                      /* Used to loop through N hash tables */
  int iMinHash;

  /* This routine is only be called from within a read transaction. */
  assert( pWal->readLock>=0 || pWal->lockError );

  /* If the "last page" field of the wal-index header snapshot is 0, then
  ** no data will be read from the wal under any circumstances. Return early
  ** in this case as an optimization.  Likewise, if pWal->readLock==0, 
  ** then the WAL is ignored by the reader so return early, as if the 
  ** WAL were empty.
  */







  if( iLast==0 || (pWal->readLock==0 && pWal->bShmUnreliable==0) ){
    *piRead = 0;
    return SQLITE_OK;
  }

  /* Each iteration of the following for() loop searches one
  ** hash table (each hash table indexes up to HASHTABLE_NPAGE frames).
  **
  ** This code might run concurrently to the code in walIndexAppend()
  ** that adds entries to the wal-index (and possibly to this hash 
  ** table). This means the value just read from the hash 
  ** slot (aHash[iKey]) may have been added before or after the 
  ** current read transaction was opened. Values added after the
  ** read transaction was opened may have been written incorrectly -
  ** i.e. these slots may contain garbage data. However, we assume
  ** that any slots written before the current read transaction was
  ** opened remain unmodified.
  **
  ** For the reasons above, the if(...) condition featured in the inner
  ** loop of the following block is more stringent that would be required 
  ** if we had exclusive access to the hash-table:
  **
  **   (aPgno[iFrame]==pgno): 
  **     This condition filters out normal hash-table collisions.
  **
  **   (iFrame<=iLast): 
  **     This condition filters out entries that were added to the hash
  **     table after the current read-transaction had started.
  */
  iMinHash = walFramePage(pWal->minFrame);
  for(iHash=walFramePage(iLast); iHash>=iMinHash; iHash--){
    WalHashLoc sLoc;              /* Hash table location */
    int iKey;                     /* Hash slot index */
    int nCollide;                 /* Number of hash collisions remaining */
    int rc;                       /* Error code */

    rc = walHashGet(pWal, iHash, &sLoc);
    if( rc!=SQLITE_OK ){
      return rc;








    }
    nCollide = HASHTABLE_NSLOT;
    for(iKey=walHash(pgno); sLoc.aHash[iKey]; iKey=walNextHash(iKey)){
      u32 iFrame = sLoc.aHash[iKey] + sLoc.iZero;
      if( iFrame<=iLast && iFrame>=pWal->minFrame
       && sLoc.aPgno[sLoc.aHash[iKey]]==pgno ){
        assert( iFrame>iRead || CORRUPT_DB );
        iRead = iFrame;
      }
      if( (nCollide--)==0 ){
        return SQLITE_CORRUPT_BKPT;
      }
    }

    if( iRead ) break;





  }


#ifdef SQLITE_ENABLE_EXPENSIVE_ASSERT
  /* If expensive assert() statements are available, do a linear search
  ** of the wal-index file content. Make sure the results agree with the
  ** result obtained using the hash indexes above.  */



  if( rc==SQLITE_OK ){
    u32 iRead2 = 0;
    u32 iTest;
    assert( pWal->bShmUnreliable || pWal->minFrame>0 );
    for(iTest=iLast; iTest>=pWal->minFrame && iTest>0; iTest--){
      if( walFramePgno(pWal, iTest)==pgno ){
        iRead2 = iTest;
................................................................................
/*
** Read the contents of frame iRead from the wal file into buffer pOut
** (which is nOut bytes in size). Return SQLITE_OK if successful, or an
** error code otherwise.
*/
int sqlite3WalReadFrame(
  Wal *pWal,                      /* WAL handle */
  u32 iRead,                      /* Frame to read */
  int nOut,                       /* Size of buffer pOut in bytes */
  u8 *pOut                        /* Buffer to write page data to */
){
  int sz;


  i64 iOffset;


  sz = pWal->hdr.szPage;
  sz = (sz&0xfe00) + ((sz&0x0001)<<16);
  testcase( sz<=32768 );
  testcase( sz>=65536 );










  iOffset = walFrameOffset(iRead, sz) + WAL_FRAME_HDRSIZE;
  /* testcase( IS_BIG_INT(iOffset) ); // requires a 4GiB WAL */
  return sqlite3OsRead(pWal->pWalFd, pOut, (nOut>sz ? sz : nOut), iOffset);
}

/* 
** Return the size of the database in pages (or zero, if unknown).
*/
Pgno sqlite3WalDbsize(Wal *pWal){
  if( pWal && ALWAYS(pWal->readLock>=0) ){
    return pWal->hdr.nPage;
  }
  return 0;
}

/*
** Take the WRITER lock on the WAL file. Return SQLITE_OK if successful,
................................................................................
              u8 aNew[4];
              u8 *aOld = &((u8*)pPage1->pData)[40];
              int sz;
              i64 iOffset;
              sz = pWal->hdr.szPage;
              sz = (sz&0xfe00) + ((sz&0x0001)<<16);
              iOffset = walFrameOffset(i+sLoc.iZero, sz) + WAL_FRAME_HDRSIZE+40;
              rc = sqlite3OsRead(pWal->pWalFd, aNew, sizeof(aNew), iOffset);
              if( rc==SQLITE_OK && memcmp(aOld, aNew, sizeof(aNew)) ){
                rc = SQLITE_BUSY_SNAPSHOT;
              }
            }else if( sqlite3BitvecTestNotNull(pAllRead, sLoc.aPgno[i]) ){
              *piConflict = sLoc.aPgno[i];
              rc = SQLITE_BUSY_SNAPSHOT;
            }else if( (pPg = sqlite3PagerLookup(pPager, sLoc.aPgno[i])) ){
................................................................................
**
** Otherwise, if the callback function does not return an error, this
** function returns SQLITE_OK.
*/
int sqlite3WalUndo(Wal *pWal, int (*xUndo)(void *, Pgno), void *pUndoCtx){
  int rc = SQLITE_OK;
  if( pWal->writeLock ){
    Pgno iMax = pWal->hdr.mxFrame;


    Pgno iFrame;
  


    /* Restore the clients cache of the wal-index header to the state it
    ** was in before the client began writing to the database. 
    */
    memcpy(&pWal->hdr, (void *)walIndexHdr(pWal), sizeof(WalIndexHdr));



    for(iFrame=pWal->hdr.mxFrame+1; 
        ALWAYS(rc==SQLITE_OK) && iFrame<=iMax; 
        iFrame++
    ){
      /* This call cannot fail. Unless the page for which the page number
      ** is passed as the second argument is (a) in the cache and 
      ** (b) has an outstanding reference, then xUndo is either a no-op
      ** (if (a) is false) or simply expels the page from the cache (if (b)
      ** is false).
      **
      ** If the upper layer is doing a rollback, it is guaranteed that there
      ** are no outstanding references to any page other than page 1. And
      ** page 1 is never written to the log until the transaction is
      ** committed. As a result, the call to xUndo may not fail.
      */




      assert( walFramePgno(pWal, iFrame)!=1 );


      rc = xUndo(pUndoCtx, walFramePgno(pWal, iFrame));
    }
    if( iMax!=pWal->hdr.mxFrame ) walCleanupHash(pWal);
  }
  return rc;
}

/* 
** Argument aWalData must point to an array of WAL_SAVEPOINT_NDATA u32 
** values. This function populates the array with values required to 
** "rollback" the write position of the WAL handle back to the current 
** point in the event of a savepoint rollback (via WalSavepointUndo()).
*/
void sqlite3WalSavepoint(Wal *pWal, u32 *aWalData){
  aWalData[0] = pWal->hdr.mxFrame;



  aWalData[1] = pWal->hdr.aFrameCksum[0];
  aWalData[2] = pWal->hdr.aFrameCksum[1];
  aWalData[3] = pWal->nCkpt;

}

/* 
** Move the write position of the WAL back to the point identified by
** the values in the aWalData[] array. aWalData must point to an array
** of WAL_SAVEPOINT_NDATA u32 values that has been previously populated
** by a call to WalSavepoint().
*/
int sqlite3WalSavepointUndo(Wal *pWal, u32 *aWalData){
  int rc = SQLITE_OK;



  assert( pWal->writeLock || aWalData[0]==pWal->hdr.mxFrame );
  assert( aWalData[3]!=pWal->nCkpt || aWalData[0]<=pWal->hdr.mxFrame );



  if( aWalData[3]!=pWal->nCkpt ){
    /* This savepoint was opened immediately after the write-transaction
    ** was started. Right after that, the writer decided to wrap around
    ** to the start of the log. Update the savepoint values to match.
    */
    aWalData[0] = 0;
    aWalData[3] = pWal->nCkpt;
  }

  if( aWalData[0]<pWal->hdr.mxFrame ){
    pWal->hdr.mxFrame = aWalData[0];
    pWal->hdr.aFrameCksum[0] = aWalData[1];
    pWal->hdr.aFrameCksum[1] = aWalData[2];
    walCleanupHash(pWal);
  }

  return rc;
}

/*



























** This function is called just before writing a set of frames to the log
** file (see sqlite3WalFrames()). It checks to see if, instead of appending
** to the current log file, it is possible to overwrite the start of the
** existing log file with the new frames (i.e. "reset" the log). If so,
** it sets pWal->hdr.mxFrame to 0. Otherwise, pWal->hdr.mxFrame is left
** unchanged.



**
** SQLITE_OK is returned if no error is encountered (regardless of whether
** or not pWal->hdr.mxFrame is modified). An SQLite error code is returned
** if an error occurs.
*/
static int walRestartLog(Wal *pWal){
  int rc = SQLITE_OK;































  if( pWal->readLock==0 ){
    volatile WalCkptInfo *pInfo = walCkptInfo(pWal);
    assert( pInfo->nBackfill==pWal->hdr.mxFrame );
    if( pInfo->nBackfill>0 ){
      u32 salt1;
      sqlite3_randomness(4, &salt1);
      rc = walLockExclusive(pWal, WAL_READ_LOCK(1), WAL_NREADER-1);
      if( rc==SQLITE_OK ){
................................................................................
    ** only - never from the wal file. This means that if a writer holding
    ** a lock on aReadmark[0] were to commit a transaction but not close the
    ** read-transaction, subsequent read operations would read directly from
    ** the database file - ignoring the new pages just appended
    ** to the wal file. */
    rc = walUpgradeReadlock(pWal);
  }

  return rc;
}

/*
** Information about the current state of the WAL file and where
** the next fsync should occur - passed from sqlite3WalFrames() into
** walWriteToLog().
................................................................................
  PgHdr *pPage,               /* The page of the frame to be written */
  int nTruncate,              /* The commit flag.  Usually 0.  >0 for commit */
  sqlite3_int64 iOffset       /* Byte offset at which to write */
){
  int rc;                         /* Result code from subfunctions */
  void *pData;                    /* Data actually written */
  u8 aFrame[WAL_FRAME_HDRSIZE];   /* Buffer to assemble frame-header in */












#if defined(SQLITE_HAS_CODEC)
  if( (pData = sqlite3PagerCodec(pPage))==0 ) return SQLITE_NOMEM_BKPT;
#else
  pData = pPage->pData;
#endif
  walEncodeFrame(p->pWal, pPage->pgno, nTruncate, pData, aFrame);
  rc = walWriteToLog(p, aFrame, sizeof(aFrame), iOffset);
................................................................................
** one or more frames have been overwritten. It updates the checksums for
** all frames written to the wal file by the current transaction starting
** with the earliest to have been overwritten.
**
** SQLITE_OK is returned if successful, or an SQLite error code otherwise.
*/
static int walRewriteChecksums(Wal *pWal, u32 iLast){
  const int szPage = pWal->szPage;/* Database page size */
  int rc = SQLITE_OK;             /* Return code */

  u8 *aBuf;                       /* Buffer to load data from wal file into */
  u8 aFrame[WAL_FRAME_HDRSIZE];   /* Buffer to assemble frame-headers in */
  u32 iRead;                      /* Next frame to read from wal file */
  i64 iCksumOff;


  aBuf = sqlite3_malloc(szPage + WAL_FRAME_HDRSIZE);
  if( aBuf==0 ) return SQLITE_NOMEM_BKPT;

  /* Find the checksum values to use as input for the recalculating the
  ** first checksum. If the first frame is frame 1 (implying that the current
  ** transaction restarted the wal file), these values must be read from the
................................................................................
  ** previous frame.  */
  assert( pWal->iReCksum>0 );
  if( pWal->iReCksum==1 ){
    iCksumOff = 24;
  }else{
    iCksumOff = walFrameOffset(pWal->iReCksum-1, szPage) + 16;
  }
  rc = sqlite3OsRead(pWal->pWalFd, aBuf, sizeof(u32)*2, iCksumOff);
  pWal->hdr.aFrameCksum[0] = sqlite3Get4byte(aBuf);
  pWal->hdr.aFrameCksum[1] = sqlite3Get4byte(&aBuf[sizeof(u32)]);

  iRead = pWal->iReCksum;
  pWal->iReCksum = 0;
  for(; rc==SQLITE_OK && iRead<=iLast; iRead++){
    i64 iOff = walFrameOffset(iRead, szPage);
    rc = sqlite3OsRead(pWal->pWalFd, aBuf, szPage+WAL_FRAME_HDRSIZE, iOff);
    if( rc==SQLITE_OK ){
      u32 iPgno, nDbSize;
      iPgno = sqlite3Get4byte(aBuf);
      nDbSize = sqlite3Get4byte(&aBuf[4]);

      walEncodeFrame(pWal, iPgno, nDbSize, &aBuf[WAL_FRAME_HDRSIZE], aFrame);
      rc = sqlite3OsWrite(pWal->pWalFd, aFrame, sizeof(aFrame), iOff);
    }
  }

  sqlite3_free(aBuf);
  return rc;
}

................................................................................
  PgHdr *pLast = 0;               /* Last frame in list */
  int nExtra = 0;                 /* Number of extra copies of last page */
  int szFrame;                    /* The size of a single frame */
  i64 iOffset;                    /* Next byte to write in WAL file */
  WalWriter w;                    /* The writer */
  u32 iFirst = 0;                 /* First frame that may be overwritten */
  WalIndexHdr *pLive;             /* Pointer to shared header */



  assert( pList );
  assert( pWal->writeLock );

  /* If this frame set completes a transaction, then nTruncate>0.  If
  ** nTruncate==0 then this frame set does not complete the transaction. */
  assert( (isCommit!=0)==(nTruncate!=0) );

#if defined(SQLITE_TEST) && defined(SQLITE_DEBUG)
  { int cnt; for(cnt=0, p=pList; p; p=p->pDirty, cnt++){}
    WALTRACE(("WAL%p: frame write begin. %d frames. mxFrame=%d. %s\n",
              pWal, cnt, pWal->hdr.mxFrame, isCommit ? "Commit" : "Spill"));
  }
#endif

  pLive = (WalIndexHdr*)walIndexHdr(pWal);
  if( memcmp(&pWal->hdr, (void *)pLive, sizeof(WalIndexHdr))!=0 ){
    iFirst = pLive->mxFrame+1;


  }

  /* See if it is possible to write these frames into the start of the
  ** log file, instead of appending to it at pWal->hdr.mxFrame.
  */
  if( SQLITE_OK!=(rc = walRestartLog(pWal)) ){
    return rc;
  }

  /* If this is the first frame written into the log, write the WAL
  ** header to the start of the WAL file. See comments at the top of
  ** this source file for a description of the WAL header format.
  */
  iFrame = pWal->hdr.mxFrame;










  if( iFrame==0 ){

    u8 aWalHdr[WAL_HDRSIZE];      /* Buffer to assemble wal-header in */
    u32 aCksum[2];                /* Checksum for wal-header */

    sqlite3Put4byte(&aWalHdr[0], (WAL_MAGIC | SQLITE_BIGENDIAN));
    sqlite3Put4byte(&aWalHdr[4], WAL_MAX_VERSION);
    sqlite3Put4byte(&aWalHdr[8], szPage);












    sqlite3Put4byte(&aWalHdr[12], pWal->nCkpt);
    if( pWal->nCkpt==0 ) sqlite3_randomness(8, pWal->hdr.aSalt);
    memcpy(&aWalHdr[16], pWal->hdr.aSalt, 8);
    walChecksumBytes(1, aWalHdr, WAL_HDRSIZE-2*4, 0, aCksum);
    sqlite3Put4byte(&aWalHdr[24], aCksum[0]);
    sqlite3Put4byte(&aWalHdr[28], aCksum[1]);
    
    pWal->szPage = szPage;
    pWal->hdr.bigEndCksum = SQLITE_BIGENDIAN;
    pWal->hdr.aFrameCksum[0] = aCksum[0];
    pWal->hdr.aFrameCksum[1] = aCksum[1];
    pWal->truncateOnCommit = 1;

    rc = sqlite3OsWrite(pWal->pWalFd, aWalHdr, sizeof(aWalHdr), 0);
    WALTRACE(("WAL%p: wal-header write %s\n", pWal, rc ? "failed" : "ok"));
    if( rc!=SQLITE_OK ){
      return rc;
    }

    /* Sync the header (unless SQLITE_IOCAP_SEQUENTIAL is true or unless
    ** all syncing is turned off by PRAGMA synchronous=OFF).  Otherwise
    ** an out-of-order write following a WAL restart could result in
    ** database corruption.  See the ticket:
    **
    **     https://sqlite.org/src/info/ff5be73dee
    */
    if( pWal->syncHeader ){
      rc = sqlite3OsSync(pWal->pWalFd, CKPT_SYNC_FLAGS(sync_flags));
      if( rc ) return rc;
    }
  }
  assert( (int)pWal->szPage==szPage );

  /* Setup information needed to write frames into the WAL */
  w.pWal = pWal;
  w.pFd = pWal->pWalFd;
  w.iSyncPoint = 0;
  w.syncFlags = sync_flags;
  w.szPage = szPage;
  iOffset = walFrameOffset(iFrame+1, szPage);
  szFrame = szPage + WAL_FRAME_HDRSIZE;

  /* Write all frames into the log file exactly once */
................................................................................

    /* Check if this page has already been written into the wal file by
    ** the current transaction. If so, overwrite the existing frame and
    ** set Wal.writeLock to WAL_WRITELOCK_RECKSUM - indicating that 
    ** checksums must be recomputed when the transaction is committed.  */
    if( iFirst && (p->pDirty || isCommit==0) ){
      u32 iWrite = 0;
      VVA_ONLY(rc =) sqlite3WalFindFrame(pWal, p->pgno, &iWrite);
      assert( rc==SQLITE_OK || iWrite==0 );



      if( iWrite>=iFirst ){
        i64 iOff = walFrameOffset(iWrite, szPage) + WAL_FRAME_HDRSIZE;
        void *pData;
        if( pWal->iReCksum==0 || iWrite<pWal->iReCksum ){
          pWal->iReCksum = iWrite;
        }
#if defined(SQLITE_HAS_CODEC)
        if( (pData = sqlite3PagerCodec(p))==0 ) return SQLITE_NOMEM;
#else
        pData = p->pData;
#endif
        rc = sqlite3OsWrite(pWal->pWalFd, pData, szPage, iOff);
        if( rc ) return rc;
        p->flags &= ~PGHDR_WAL_APPEND;
        continue;
      }
    }

    iFrame++;
................................................................................
  ** boundary is crossed.  Only the part of the WAL prior to the last
  ** sector boundary is synced; the part of the last frame that extends
  ** past the sector boundary is written after the sync.
  */
  if( isCommit && WAL_SYNC_FLAGS(sync_flags)!=0 ){
    int bSync = 1;
    if( pWal->padToSectorBoundary ){
      int sectorSize = sqlite3SectorSize(pWal->pWalFd);
      w.iSyncPoint = ((iOffset+sectorSize-1)/sectorSize)*sectorSize;
      bSync = (w.iSyncPoint==iOffset);
      testcase( bSync );
      while( iOffset<w.iSyncPoint ){
        rc = walWriteOneFrame(&w, pLast, nTruncate, iOffset);
        if( rc ) return rc;
        iOffset += szFrame;
................................................................................
  }

  /* Append data to the wal-index. It is not necessary to lock the 
  ** wal-index to do this as the SQLITE_SHM_WRITE lock held on the wal-index
  ** guarantees that there are no other writers, and no data that may
  ** be in use by existing readers is being overwritten.
  */
  iFrame = pWal->hdr.mxFrame;
  for(p=pList; p && rc==SQLITE_OK; p=p->pDirty){
    if( (p->flags & PGHDR_WAL_APPEND)==0 ) continue;
    iFrame++;
    rc = walIndexAppend(pWal, iFrame, p->pgno);
  }
  while( rc==SQLITE_OK && nExtra>0 ){
    iFrame++;
    nExtra--;
    rc = walIndexAppend(pWal, iFrame, pLast->pgno);
  }

  if( rc==SQLITE_OK ){
    /* Update the private copy of the header. */
    pWal->hdr.szPage = (u16)((szPage&0xff00) | (szPage>>16));
    testcase( szPage<=32768 );
    testcase( szPage>=65536 );
    pWal->hdr.mxFrame = iFrame;
    if( isCommit ){
      pWal->hdr.iChange++;
      pWal->hdr.nPage = nTruncate;
    }
    /* If this is a commit, update the wal-index header too. */
    if( isCommit ){
      walIndexWriteHdr(pWal);









      pWal->iCallback = iFrame;

    }
  }

  WALTRACE(("WAL%p: frame write %s\n", pWal, rc ? "failed" : "ok"));
  return rc;
}

................................................................................
    if( isChanged && pWal->pDbFd->pMethods->iVersion>=3 ){
      sqlite3OsUnfetch(pWal->pDbFd, 0, 0);
    }
  }

  /* Copy data from the log to the database file. */
  if( rc==SQLITE_OK ){
    if( pWal->hdr.mxFrame && walPagesize(pWal)!=nBuf ){


      rc = SQLITE_CORRUPT_BKPT;
    }else{
      rc = walCheckpoint(pWal, db, eMode2, xBusy2, pBusyArg, sync_flags, zBuf);
    }

    /* If no error occurred, set the output variables. */
    if( rc==SQLITE_OK || rc==SQLITE_BUSY ){
      if( pnLog ) *pnLog = (int)pWal->hdr.mxFrame;




      if( pnCkpt ) *pnCkpt = (int)(walCkptInfo(pWal)->nBackfill);








    }
  }

  if( isChanged ){
    /* If a new wal-index header was loaded before the checkpoint was 
    ** performed, then the pager-cache associated with pWal is now
    ** out of date. So zero the cached wal-index header to ensure that
................................................................................
** If op is negative, then do a dry-run of the op==1 case but do
** not actually change anything. The pager uses this to see if it
** should acquire the database exclusive lock prior to invoking
** the op==1 case.
*/
int sqlite3WalExclusiveMode(Wal *pWal, int op){
  int rc;

  assert( pWal->writeLock==0 );
  assert( pWal->exclusiveMode!=WAL_HEAPMEMORY_MODE || op==-1 );

  /* pWal->readLock is usually set, but might be -1 if there was a 
  ** prior error while attempting to acquire are read-lock. This cannot 
  ** happen if the connection is actually in exclusive mode (as no xShmLock
  ** locks are taken in this case). Nor should the pager attempt to
  ** upgrade to exclusive-mode following such an error.
  */
  assert( pWal->readLock>=0 || pWal->lockError );
  assert( pWal->readLock>=0 || (op<=0 && pWal->exclusiveMode==0) );

  if( op==0 ){
    if( pWal->exclusiveMode!=WAL_NORMAL_MODE ){
      pWal->exclusiveMode = WAL_NORMAL_MODE;



      if( walLockShared(pWal, WAL_READ_LOCK(pWal->readLock))!=SQLITE_OK ){


        pWal->exclusiveMode = WAL_EXCLUSIVE_MODE;
      }
      rc = pWal->exclusiveMode==WAL_NORMAL_MODE;
    }else{
      /* Already in locking_mode=NORMAL */
      rc = 0;
    }
  }else if( op>0 ){
    assert( pWal->exclusiveMode==WAL_NORMAL_MODE );
    assert( pWal->readLock>=0 );



    walUnlockShared(pWal, WAL_READ_LOCK(pWal->readLock));

    pWal->exclusiveMode = WAL_EXCLUSIVE_MODE;
    rc = 1;
  }else{
    rc = pWal->exclusiveMode==WAL_NORMAL_MODE;
  }
  return rc;
}
................................................................................
  return (pWal ? pWal->szPage : 0);
}
#endif

/* Return the sqlite3_file object for the WAL file
*/
sqlite3_file *sqlite3WalFile(Wal *pWal){
  return pWal->pWalFd;
}

/* 
** Return the values required by sqlite3_wal_info().
*/
int sqlite3WalInfo(Wal *pWal, u32 *pnPrior, u32 *pnFrame){
  int rc = SQLITE_OK;

** being considered valid at the same time and being checkpointing together
** following a crash.
**
** READER ALGORITHM
**
** To read a page from the database (call it page number P), a reader
** first checks the WAL to see if it contains page P.  If so, then the
** last valid instance of page P that is followed by a commit frame
** or is a commit frame itself becomes the value read.  If the WAL
** contains no copies of page P that are valid and which are a commit
** frame or are followed by a commit frame, then page P is read from
** the database file.
**
** To start a read transaction, the reader records the index of the last
** valid frame in the WAL.  The reader uses this recorded "mxFrame" value
................................................................................
**
** Note that entries are added in order of increasing K.  Hence, one
** reader might be using some value K0 and a second reader that started
** at a later time (after additional transactions were added to the WAL
** and to the wal-index) might be using a different value K1, where K1>K0.
** Both readers can use the same hash table and mapping section to get
** the correct result.  There may be entries in the hash table with
** K>K0, but to the first reader those entries will appear to be unused
** slots in the hash table and so the first reader will get an answer as
** if no values greater than K0 had ever been inserted into the hash table
** in the first place - which is what reader one wants.  Meanwhile, the
** second reader using K1 will see additional values that were inserted
** later, which is exactly what reader two wants.  
**
** When a rollback occurs, the value of K is decreased. Hash table entries
** that correspond to frames greater than the new K value are removed
** from the hash table at this point.
*/

/*
** WAL2 NOTES
**
** This file also contains the implementation of "wal2" mode - activated
** using "PRAGMA journal_mode = wal2". Wal2 mode is very similar to wal
** mode, except that it uses two wal files instead of one. Under some
** circumstances, wal2 mode provides more concurrency than legacy wal 
** mode.
**
** THE PROBLEM WAL2 SOLVES:
**
** In legacy wal mode, if a writer wishes to write to the database while
** a checkpoint is ongoing, it may append frames to the existing wal file.
** This means that after the checkpoint has finished, the wal file consists
** of a large block of checkpointed frames, followed by a block of
** uncheckpointed frames. In a deployment that features a high volume of
** write traffic, this may mean that the wal file is never completely
** checkpointed. And so grows indefinitely.
**
** An alternative is to use "PRAGMA wal_checkpoint=RESTART" or similar to
** force a complete checkpoint of the wal file. But this must:
**
**   1) Wait on all existing readers to finish,
**   2) Wait on any existing writer, and then block all new writers,
**   3) Do the checkpoint,
**   4) Wait on any new readers that started during steps 2 and 3. Writers
**      are still blocked during this step.
**
** This means that in order to avoid the wal file growing indefinitely 
** in a busy system, writers must periodically pause to allow a checkpoint
** to complete. In a system with long running readers, such pauses may be
** for a non-trivial amount of time.
**
** OVERVIEW OF SOLUTION
**
** Wal2 mode uses two wal files. After writers have grown the first wal 
** file to a pre-configured size, they begin appending transactions to 
** the second wal file. Once all existing readers are reading snapshots
** new enough to include the entire first wal file, a checkpointer can
** checkpoint it.
**
** Meanwhile, writers are writing transactions to the second wal file.
** Once that wal file has grown larger than the pre-configured size, each
** new writer checks if:
**
**    * the first wal file has been checkpointed, and if so, if
**    * there are no readers still reading from the first wal file (once
**      it has been checkpointed, new readers read only from the second
**      wal file).
**
** If both these conditions are true, the writer may switch back to the
** first wal file. Eventually, a checkpointer can checkpoint the second
** wal file, and so on.
**
** The wal file that writers are currently appending to (the one they
** don't have to check the above two criteria before writing to) is called
** the "current" wal file.
**
** The first wal file takes the same name as the wal file in legacy wal
** mode systems - "<db>-wal". The second is named "<db>-wal2".
**
** WAL FILE FORMAT
**
** The file format used for each wal file in wal2 mode is the same as for
** legacy wal mode.  Except, the file format field is set to 3021000 
** instead of 3007000.
**
** WAL-INDEX FORMAT
**
** The wal-index format is also very similar. Even though there are two
** wal files, there is still a single wal-index shared-memory area (*-shm
** file with the default unix or win32 VFS). The wal-index header is the
** same size, with the following exceptions it has the same format:
**
**   * The version field is set to 3021000 instead of 3007000.
**
**   * An unused 32-bit field in the legacy wal-index header is
**     now used to store (a) a single bit indicating which of the
**     two wal files writers should append to and (b) the number
**     of frames in the second wal file (31 bits).
**
** The first hash table in the wal-index contains entries corresponding
** to the first HASHTABLE_NPAGE_ONE frames stored in the first wal file.
** The second hash table in the wal-index contains entries indexing the
** first HASHTABLE_NPAGE frames in the second wal file. The third hash
** table contains the next HASHTABLE_NPAGE frames in the first wal file,
** and so on.
**
** LOCKS
**
** Read-locks are simpler than for legacy wal mode. There are no locking
** slots that contain frame numbers. Instead, there are four distinct
** combinations of read locks a reader may hold:
**
**   WAL_LOCK_PART1:       "part" lock on first wal, none of second.
**   WAL_LOCK_PART1_FULL2: "part" lock on first wal, "full" of second.
**   WAL_LOCK_PART2: no lock on first wal, "part" lock on second.
**   WAL_LOCK_PART2_FULL1: "full" lock on first wal, "part" lock on second.
**
** When a reader reads the wal-index header as part of opening a read
** transaction, it takes a "part" lock on the current wal file. "Part" 
** because the wal file may grow while the read transaction is active, in 
** which case the reader would be reading only part of the wal file. 
** A part lock prevents a checkpointer from checkpointing the wal file 
** on which it is held.
**
** If there is data in the non-current wal file that has not been 
** checkpointed, the reader takes a "full" lock on that wal file. A 
** "full" lock indicates that the reader is using the entire wal file.
** A full lock prevents a writer from overwriting the wal file on which
** it is held, but does not prevent a checkpointer from checkpointing 
** it.
**
** There is still a single WRITER and a single CHECKPOINTER lock. The
** recovery procedure still takes the same exclusive lock on the entire
** range of SQLITE_SHM_NLOCK shm-locks. This works because the read-locks
** above use four of the six read-locking slots used by legacy wal mode.
** See the header comment for function walLockReader() for details.
**
** STARTUP/RECOVERY
**
** The read and write version fields of the database header in a wal2
** database are set to 0x03, instead of 0x02 as in legacy wal mode.
**
** The wal file format used in wal2 mode is the same as the format used
** in legacy wal mode. However, in order to support recovery, there are two
** differences in the way wal file header fields are populated, as follows:
**
**   * When the first wal file is first created, the "nCkpt" field in
**     the wal file header is set to 0. Thereafter, each time the writer
**     switches wal file, it sets the nCkpt field in the new wal file
**     header to ((nCkpt0 + 1) & 0x0F), where nCkpt0 is the value in
**     the previous wal file header. This means that the first wal file
**     always has an even value in the nCkpt field, and the second wal
**     file always has an odd value.
**
**   * When a writer switches wal file, it sets the salt values in the
**     new wal file to a copy of the checksum for the final frame in
**     the previous wal file.
**
** Recovery proceeds as follows:
**
** 1. Each wal file is recovered separately. Except, if the first wal 
**    file does not exist or is zero bytes in size, the second wal file
**    is truncated to zero bytes before it is "recovered".
**
** 2. If both wal files contain valid headers, then the nCkpt fields
**    are compared to see which of the two wal files is older. If the
**    salt keys in the second wal file match the final frame checksum 
**    in the older wal file, then both wal files are used. Otherwise,
**    the newer wal file is ignored.
**
** 3. Or, if only one or neither of the wal files has a valid header, 
**    then only a single or no wal files are recovered into the 
**    reconstructed wal-index.
**
** Refer to header comments for walIndexRecover() for further details.
*/

#ifndef SQLITE_OMIT_WAL

#include "wal.h"

/*
** Trace output macros
*/
................................................................................
# define AtomicStore(PTR,VAL)  __atomic_store_n((PTR),(VAL),__ATOMIC_RELAXED)
#else
# define AtomicLoad(PTR)       (*(PTR))
# define AtomicStore(PTR,VAL)  (*(PTR) = (VAL))
#endif

/*
** Both the wal-file and the wal-index contain version fields 
** indicating the current version of the system. If a client
** reads the header of a wal file (as part of recovery), or the
** wal-index (as part of opening a read transaction) and (a) the
** header checksum is correct but (b) the version field is not
** recognized, the operation fails with SQLITE_CANTOPEN.
**
** Currently, clients support both version-1 ("journal_mode=wal") and
** version-2 ("journal_mode=wal2"). Legacy clients may support version-1
** only.

*/
#define WAL_VERSION1 3007000      /* For "journal_mode=wal" */
#define WAL_VERSION2 3021000      /* For "journal_mode=wal2" */


/*
** Index numbers for various locking bytes.   WAL_NREADER is the number
** of available reader locks and should be at least 3.  The default
** is SQLITE_SHM_NLOCK==8 and  WAL_NREADER==5.
**
** Technically, the various VFSes are free to implement these locks however
................................................................................
#define WAL_WRITE_LOCK         0
#define WAL_ALL_BUT_WRITE      1
#define WAL_CKPT_LOCK          1
#define WAL_RECOVER_LOCK       2
#define WAL_READ_LOCK(I)       (3+(I))
#define WAL_NREADER            (SQLITE_SHM_NLOCK-3)

/*
** Values that may be stored in Wal.readLock in wal2 mode.
**
** In wal mode, the Wal.readLock member is set to -1 when no read-lock
** is held, or else is the index of the read-mark on which a lock is
** held.
**
** In wal2 mode, Wal.readLock must be set to one of the following values.
** A value of -1 still indicates that no read-lock is held, but the other
** values are symbolic. See the implementation of walLockReader() for
** details of how the symbols map to OS level locks.
*/
#define WAL_LOCK_NONE        -1
#define WAL_LOCK_PART1        1
#define WAL_LOCK_PART1_FULL2  2
#define WAL_LOCK_PART2        3
#define WAL_LOCK_PART2_FULL1  4

/* 
** This constant is used in wal2 mode only.
**
** In wal2 mode, when committing a transaction, if the current wal file 
** is sufficiently large and there are no conflicting locks held, the
** writer writes the new transaction into the start of the other wal
** file. Usually, "sufficiently large" is defined by the value configured
** using "PRAGMA journal_size_limit". However, if no such value has been
** configured, sufficiently large defaults to WAL_DEFAULT_WALSIZE frames.
*/
#define WAL_DEFAULT_WALSIZE 1000

/* Object declarations */
typedef struct WalIndexHdr WalIndexHdr;
typedef struct WalIterator WalIterator;
typedef struct WalCkptInfo WalCkptInfo;


................................................................................
** For all versions of SQLite through 3.10.0 and probably beyond,
** the locking bytes (WalCkptInfo.aLock) start at offset 120 and
** the total header size is 136 bytes.
**
** The szPage value can be any power of 2 between 512 and 32768, inclusive.
** Or it can be 1 to represent a 65536-byte page.  The latter case was
** added in 3.7.1 when support for 64K pages was added.  
**
** WAL2 mode notes: Member variable mxFrame2 is only used in wal2 mode
** (when iVersion is set to WAL_VERSION2). The lower 31 bits store
** the maximum frame number in file *-wal2. The most significant bit
** is a flag - set if clients are currently appending to *-wal2, clear
** otherwise.
*/
struct WalIndexHdr {
  u32 iVersion;                   /* Wal-index version */
  u32 mxFrame2;                   /* See "WAL2 mode notes" above */
  u32 iChange;                    /* Counter incremented each transaction */
  u8 isInit;                      /* 1 when initialized */
  u8 bigEndCksum;                 /* True if checksums in WAL are big-endian */
  u16 szPage;                     /* Database page size in bytes. 1==64K */
  u32 mxFrame;                    /* Index of last valid frame in each WAL */
  u32 nPage;                      /* Size of database in pages */
  u32 aFrameCksum[2];             /* Checksum of last frame in log */
  u32 aSalt[2];                   /* Two salt values copied from WAL header */
  u32 aCksum[2];                  /* Checksum over all prior fields */
};

/*
** The following macros and functions are get/set methods for the maximum
** frame numbers and current wal file values stored in the WalIndexHdr
** structure. These are helpful because of the unorthodox way in which
** the values are stored in wal2 mode (see above). They are equivalent
** to functions with the following signatures.
**
**   u32  walidxGetMxFrame(WalIndexHdr*, int iWal);          // get mxFrame
**   void walidxSetMxFrame(WalIndexHdr*, int iWal, u32 val); // set mxFrame
**   int  walidxGetFile(WalIndexHdr*)                        // get file
**   void walidxSetFile(WalIndexHdr*, int val);              // set file
*/
#define walidxGetMxFrame(pHdr, iWal) \
  ((iWal) ? ((pHdr)->mxFrame2 & 0x7FFFFFF) : (pHdr)->mxFrame)

static void walidxSetMxFrame(WalIndexHdr *pHdr, int iWal, u32 mxFrame){
  if( iWal ){
    pHdr->mxFrame2 = (pHdr->mxFrame2 & 0x80000000) | mxFrame;
  }else{
    pHdr->mxFrame = mxFrame;
  }
  assert( walidxGetMxFrame(pHdr, iWal)==mxFrame );
}

#define walidxGetFile(pHdr) ((pHdr)->mxFrame2 >> 31)

#define walidxSetFile(pHdr, iWal) (                                   \
    (pHdr)->mxFrame2 = ((pHdr)->mxFrame2 & 0x7FFFFFFF) | ((iWal)<<31) \
)

/*
** Argument is a pointer to a Wal structure. Return true if the current
** cache of the wal-index header indicates "journal_mode=wal2" mode, or
** false otherwise.
*/
#define isWalMode2(pWal) ((pWal)->hdr.iVersion==WAL_VERSION2)

/*
** A copy of the following object occurs in the wal-index immediately
** following the second copy of the WalIndexHdr.  This object stores
** information used by checkpoint.
**
** nBackfill is the number of frames in the WAL that have been written
** back into the database. (We call the act of moving content from WAL to
................................................................................
/*
** An open write-ahead log file is represented by an instance of the
** following object.
*/
struct Wal {
  sqlite3_vfs *pVfs;         /* The VFS used to create pDbFd */
  sqlite3_file *pDbFd;       /* File handle for the database file */
  sqlite3_file *apWalFd[2];  /* File handle for "*-wal" and "*-wal2" */
  u32 iCallback;             /* Value to pass to log callback (or 0) */
  i64 mxWalSize;             /* Truncate WAL to this size upon reset */
  int nWiData;               /* Size of array apWiData */
  int szFirstBlock;          /* Size of first block written to WAL file */
  volatile u32 **apWiData;   /* Pointer to wal-index content in memory */
  u32 szPage;                /* Database page size */
  i16 readLock;              /* Which read lock is being held.  -1 for none */
................................................................................
  u8 padToSectorBoundary;    /* Pad transactions out to the next sector */
  u8 bShmUnreliable;         /* SHM content is read-only and unreliable */
  WalIndexHdr hdr;           /* Wal-index header for current transaction */
  u32 minFrame;              /* Ignore wal frames before this one */
  u32 iReCksum;              /* On commit, recalculate checksums from here */
  u32 nPriorFrame;           /* For sqlite3WalInfo() */
  const char *zWalName;      /* Name of WAL file */
  char *zWalName2;           /* Name of second WAL file */
  u32 nCkpt;                 /* Checkpoint sequence counter in the wal-header */
#ifdef SQLITE_DEBUG
  u8 lockError;              /* True if a locking error has occurred */
#endif
#ifdef SQLITE_ENABLE_SNAPSHOT
  WalIndexHdr *pSnapshot;    /* Start transaction here if not NULL */
#endif
  int bWal2;                 /* bWal2 flag passed to WalOpen() */
};

/*
** Candidate values for Wal.exclusiveMode.
*/
#define WAL_NORMAL_MODE     0
#define WAL_EXCLUSIVE_MODE  1     
................................................................................
*/
static void walIndexWriteHdr(Wal *pWal){
  volatile WalIndexHdr *aHdr = walIndexHdr(pWal);
  const int nCksum = offsetof(WalIndexHdr, aCksum);

  assert( pWal->writeLock );
  pWal->hdr.isInit = 1;
  assert( pWal->hdr.iVersion==WAL_VERSION1||pWal->hdr.iVersion==WAL_VERSION2 );
  walChecksumBytes(1, (u8*)&pWal->hdr, nCksum, 0, pWal->hdr.aCksum);
  memcpy((void*)&aHdr[1], (const void*)&pWal->hdr, sizeof(WalIndexHdr));
  walShmBarrier(pWal);
  memcpy((void*)&aHdr[0], (const void*)&pWal->hdr, sizeof(WalIndexHdr));
}

/*
................................................................................
  */
  pgno = sqlite3Get4byte(&aFrame[0]);
  if( pgno==0 ){
    return 0;
  }

  /* A frame is only valid if a checksum of the WAL header,
  ** all prior frames, the first 16 bytes of this frame-header, 
  ** and the frame-data matches the checksum in the last 8 
  ** bytes of this frame-header.
  */
  nativeCksum = (pWal->hdr.bigEndCksum==SQLITE_BIGENDIAN);
  walChecksumBytes(nativeCksum, aFrame, 8, aCksum, aCksum);
  walChecksumBytes(nativeCksum, aData, pWal->szPage, aCksum, aCksum);
  if( aCksum[0]!=sqlite3Get4byte(&aFrame[16]) 
................................................................................
static void walUnlockExclusive(Wal *pWal, int lockIdx, int n){
  if( pWal->exclusiveMode ) return;
  (void)sqlite3OsShmLock(pWal->pDbFd, lockIdx, n,
                         SQLITE_SHM_UNLOCK | SQLITE_SHM_EXCLUSIVE);
  WALTRACE(("WAL%p: release EXCLUSIVE-%s cnt=%d\n", pWal,
             walLockName(lockIdx), n));
}

/*
** This function is used to take and release read-locks in wal2 mode.
**
** Use of WAL_READ_LOCK(x) slots for (1<=x<=4).
**
** 1) Partial read of *-wal-1   (blocks checkpointer from checkpointing)
** 2) Full read of *-wal-2      (blocks writer from writing)
** 3) Partial read of *-wal-2   (blocks checkpointer from checkpointing)
** 4) Full read of *-wal-1      (blocks writer from writing)
*/
static int walLockReader(Wal *pWal, int eLock, int bLock){
  int i;                          /* Index of first readmark to lock */
  int n;                          /* Number of readmarks to lock */

  assert( pWal->hdr.iVersion==WAL_VERSION2 );
  if( pWal->exclusiveMode ) return SQLITE_OK;

  switch( eLock ){
    case WAL_LOCK_PART1      : i = 1; n = 1; break; 
    case WAL_LOCK_PART1_FULL2: i = 1; n = 2; break; 
    case WAL_LOCK_PART2      : i = 3; n = 1; break; 
    case WAL_LOCK_PART2_FULL1: i = 3; n = 2; break; 
    default: assert( !"cannot happen" );
  }

  return sqlite3OsShmLock(pWal->pDbFd, WAL_READ_LOCK(i), n,
      SQLITE_SHM_SHARED | (bLock ? SQLITE_SHM_LOCK : SQLITE_SHM_UNLOCK) 
  );
}

/*
** Compute a hash on a page number.  The resulting hash value must land
** between 0 and (HASHTABLE_NSLOT-1).  The walHashNext() function advances
** the hash to the next value in the event of a collision.
*/
static int walHash(u32 iPage){
................................................................................
    }else{
      pLoc->iZero = HASHTABLE_NPAGE_ONE + (iHash-1)*HASHTABLE_NPAGE;
    }
    pLoc->aPgno = &pLoc->aPgno[-1];
  }
  return rc;
}

static u32 walExternalEncode(int iWal, u32 iFrame){
  u32 iRet;
  if( iWal ){
    iRet = HASHTABLE_NPAGE_ONE + iFrame;
    iRet += ((iFrame-1) / HASHTABLE_NPAGE) * HASHTABLE_NPAGE;
  }else{
    iRet = iFrame;
    iFrame += HASHTABLE_NPAGE - HASHTABLE_NPAGE_ONE;
    iRet += ((iFrame-1) / HASHTABLE_NPAGE) * HASHTABLE_NPAGE;
  }
  return iRet;
}

/*
** Parameter iExternal is an external frame identifier. This function
** transforms it to a wal file number (0 or 1) and frame number within
** this wal file (reported via output parameter *piRead).
*/
static int walExternalDecode(u32 iExternal, u32 *piRead){
  int iHash = (iExternal+HASHTABLE_NPAGE-HASHTABLE_NPAGE_ONE-1)/HASHTABLE_NPAGE;

  if( 0==(iHash & 0x01) ){
    /* A frame in wal file 0 */
    *piRead = (iExternal <= HASHTABLE_NPAGE_ONE) ? iExternal :
      iExternal - (iHash/2) * HASHTABLE_NPAGE;
    return 0;
  }
  if( iHash==0 ){
    *piRead = iExternal;
    return 0;
  }else{
    *piRead = iExternal - HASHTABLE_NPAGE_ONE - ((iHash-1)/2) * HASHTABLE_NPAGE;
  }

  return (iHash % 2);
}

/*
** Return the number of the wal-index page that contains the hash-table
** and page-number array that contain entries corresponding to WAL frame
** iFrame. The wal-index is broken up into 32KB pages. Wal-index pages 
** are numbered starting from 0.
*/
................................................................................
       && (iHash>=1 || iFrame<=HASHTABLE_NPAGE_ONE)
       && (iHash<=1 || iFrame>(HASHTABLE_NPAGE_ONE+HASHTABLE_NPAGE))
       && (iHash>=2 || iFrame<=HASHTABLE_NPAGE_ONE+HASHTABLE_NPAGE)
       && (iHash<=2 || iFrame>(HASHTABLE_NPAGE_ONE+2*HASHTABLE_NPAGE))
  );
  return iHash;
}

/*
** Return the index of the hash-table corresponding to frame iFrame of wal
** file iWal.
*/
static int walFramePage2(int iWal, u32 iFrame){
  int iRet;
  assert( iWal==0 || iWal==1 );
  assert( iFrame>0 );
  if( iWal==0 ){
    iRet = 2*((iFrame+HASHTABLE_NPAGE-HASHTABLE_NPAGE_ONE-1)/HASHTABLE_NPAGE);
  }else{
    iRet = 1 + 2 * ((iFrame-1) / HASHTABLE_NPAGE);
  }
  return iRet;
}

/*
** Return the page number associated with frame iFrame in this WAL.
*/
static u32 walFramePgno(Wal *pWal, u32 iFrame){
  int iHash = walFramePage(iFrame);
  if( iHash==0 ){
    return pWal->apWiData[0][WALINDEX_HDR_SIZE/sizeof(u32) + iFrame - 1];
  }
  return pWal->apWiData[iHash][(iFrame-1-HASHTABLE_NPAGE_ONE)%HASHTABLE_NPAGE];
}

static u32 walFramePgno2(Wal *pWal, int iWal, u32 iFrame){
  return walFramePgno(pWal, walExternalEncode(iWal, iFrame));
}

/*
** Remove entries from the hash table that point to WAL slots greater
** than pWal->hdr.mxFrame.
**
** This function is called whenever pWal->hdr.mxFrame is decreased due
** to a rollback or savepoint.
................................................................................
** actually needed.
*/
static void walCleanupHash(Wal *pWal){
  WalHashLoc sLoc;                /* Hash table location */
  int iLimit = 0;                 /* Zero values greater than this */
  int nByte;                      /* Number of bytes to zero in aPgno[] */
  int i;                          /* Used to iterate through aHash[] */
  int iWal = walidxGetFile(&pWal->hdr);
  u32 mxFrame = walidxGetMxFrame(&pWal->hdr, iWal);

  u32 iExternal;
  if( isWalMode2(pWal) ){
    iExternal = walExternalEncode(iWal, mxFrame);
  }else{
    assert( iWal==0 );
    iExternal = mxFrame;
  }

  assert( pWal->writeLock );
  testcase( mxFrame==HASHTABLE_NPAGE_ONE-1 );
  testcase( mxFrame==HASHTABLE_NPAGE_ONE );
  testcase( mxFrame==HASHTABLE_NPAGE_ONE+1 );

  if( mxFrame==0 ) return;

  /* Obtain pointers to the hash-table and page-number array containing 
  ** the entry that corresponds to frame pWal->hdr.mxFrame. It is guaranteed
  ** that the page said hash-table and array reside on is already mapped.
  */
  assert( pWal->nWiData>walFramePage(iExternal) );
  assert( pWal->apWiData[walFramePage(iExternal)] );
  walHashGet(pWal, walFramePage(iExternal), &sLoc);

  /* Zero all hash-table entries that correspond to frame numbers greater
  ** than pWal->hdr.mxFrame.
  */
  iLimit = iExternal - sLoc.iZero;
  assert( iLimit>0 );
  for(i=0; i<HASHTABLE_NSLOT; i++){
    if( sLoc.aHash[i]>iLimit ){
      sLoc.aHash[i] = 0;
    }
  }
  
  /* Zero the entries in the aPgno array that correspond to frames with
  ** frame numbers greater than pWal->hdr.mxFrame.  */

  nByte = (int)((char *)sLoc.aHash - (char *)&sLoc.aPgno[iLimit+1]);
  memset((void *)&sLoc.aPgno[iLimit+1], 0, nByte);

#ifdef SQLITE_ENABLE_EXPENSIVE_ASSERT
  /* Verify that the every entry in the mapping region is still reachable
  ** via the hash table even after the cleanup.
  */
................................................................................
      }
      assert( sLoc.aHash[iKey]==j );
    }
  }
#endif /* SQLITE_ENABLE_EXPENSIVE_ASSERT */
}


/*
** Set an entry in the wal-index that will map database page number
** pPage into WAL frame iFrame.
*/
static int walIndexAppend(Wal *pWal, int iWal, u32 iFrame, u32 iPage){
  int rc;                         /* Return code */
  WalHashLoc sLoc;                /* Wal-index hash table location */
  u32 iExternal;
  
  if( isWalMode2(pWal) ){
    iExternal = walExternalEncode(iWal, iFrame);
  }else{
    assert( iWal==0 );
    iExternal = iFrame;
  }

  rc = walHashGet(pWal, walFramePage(iExternal), &sLoc);

  /* Assuming the wal-index file was successfully mapped, populate the
  ** page number array and hash table entry.
  */
  if( rc==SQLITE_OK ){
    int iKey;                     /* Hash table key */
    int idx;                      /* Value to write to hash-table slot */
    int nCollide;                 /* Number of hash collisions */

    idx = iExternal - sLoc.iZero;
    assert( idx <= HASHTABLE_NSLOT/2 + 1 );
    
    /* If this is the first entry to be added to this hash-table, zero the
    ** entire hash table and aPgno[] array before proceeding. 
    */
    if( idx==1 ){
      int nByte = (int)((u8 *)&sLoc.aHash[HASHTABLE_NSLOT]
................................................................................
#endif /* SQLITE_ENABLE_EXPENSIVE_ASSERT */
  }


  return rc;
}

/*
** Recover a single wal file - *-wal if iWal==0, or *-wal2 if iWal==1.
*/
static int walIndexRecoverOne(Wal *pWal, int iWal, u32 *pnCkpt, int *pbZero){
  i64 nSize;                      /* Size of log file */
  u32 aFrameCksum[2] = {0, 0};
  int rc;
  sqlite3_file *pWalFd = pWal->apWalFd[iWal];

  assert( iWal==0 || iWal==1 );

  memset(&pWal->hdr, 0, sizeof(WalIndexHdr));
  sqlite3_randomness(8, pWal->hdr.aSalt);

  rc = sqlite3OsFileSize(pWalFd, &nSize);
  if( rc==SQLITE_OK ){
    if( nSize>WAL_HDRSIZE ){
      u8 aBuf[WAL_HDRSIZE];         /* Buffer to load WAL header into */
      u8 *aFrame = 0;               /* Malloc'd buffer to load entire frame */
      int szFrame;                  /* Number of bytes in buffer aFrame[] */
      u8 *aData;                    /* Pointer to data part of aFrame buffer */
      int iFrame;                   /* Index of last frame read */
      i64 iOffset;                  /* Next offset to read from log file */
      int szPage;                   /* Page size according to the log */
      u32 magic;                    /* Magic value read from WAL header */
      u32 version;                  /* Magic value read from WAL header */
      int isValid;                  /* True if this frame is valid */
  
      /* Read in the WAL header. */
      rc = sqlite3OsRead(pWalFd, aBuf, WAL_HDRSIZE, 0);
      if( rc!=SQLITE_OK ){
        return rc;
      }
  
      /* If the database page size is not a power of two, or is greater than
      ** SQLITE_MAX_PAGE_SIZE, conclude that the WAL file contains no valid 
      ** data. Similarly, if the 'magic' value is invalid, ignore the whole
      ** WAL file.
      */
      magic = sqlite3Get4byte(&aBuf[0]);
      szPage = sqlite3Get4byte(&aBuf[8]);
      if( (magic&0xFFFFFFFE)!=WAL_MAGIC 
       || szPage&(szPage-1) 
       || szPage>SQLITE_MAX_PAGE_SIZE 
       || szPage<512 
      ){
        return SQLITE_OK;
      }
      pWal->hdr.bigEndCksum = (u8)(magic&0x00000001);
      pWal->szPage = szPage;
  
      /* Verify that the WAL header checksum is correct */
      walChecksumBytes(pWal->hdr.bigEndCksum==SQLITE_BIGENDIAN, 
          aBuf, WAL_HDRSIZE-2*4, 0, pWal->hdr.aFrameCksum
      );
      if( pWal->hdr.aFrameCksum[0]!=sqlite3Get4byte(&aBuf[24])
       || pWal->hdr.aFrameCksum[1]!=sqlite3Get4byte(&aBuf[28])
      ){
        return SQLITE_OK;
      }
  
      memcpy(&pWal->hdr.aSalt, &aBuf[16], 8);
      *pnCkpt = sqlite3Get4byte(&aBuf[12]);
  
      /* Verify that the version number on the WAL format is one that
      ** are able to understand */
      version = sqlite3Get4byte(&aBuf[4]);
      if( version!=WAL_VERSION1 && version!=WAL_VERSION2 ){
        return SQLITE_CANTOPEN_BKPT;
      }
      pWal->hdr.iVersion = version;
  
      /* Malloc a buffer to read frames into. */
      szFrame = szPage + WAL_FRAME_HDRSIZE;
      aFrame = (u8 *)sqlite3_malloc64(szFrame);
      if( !aFrame ){
        return SQLITE_NOMEM_BKPT;
      }
      aData = &aFrame[WAL_FRAME_HDRSIZE];
  
      /* Read all frames from the log file. */
      iFrame = 0;
      for(iOffset=WAL_HDRSIZE; (iOffset+szFrame)<=nSize; iOffset+=szFrame){
        u32 pgno;                   /* Database page number for frame */
        u32 nTruncate;              /* dbsize field from frame header */
  
        /* Read and decode the next log frame. */
        iFrame++;
        rc = sqlite3OsRead(pWalFd, aFrame, szFrame, iOffset);
        if( rc!=SQLITE_OK ) break;
        isValid = walDecodeFrame(pWal, &pgno, &nTruncate, aData, aFrame);
        if( !isValid ) break;
        rc = walIndexAppend(pWal, iWal, iFrame, pgno);
        if( rc!=SQLITE_OK ) break;
  
        /* If nTruncate is non-zero, this is a commit record. */
        if( nTruncate ){
          pWal->hdr.mxFrame = iFrame;
          pWal->hdr.nPage = nTruncate;
          pWal->hdr.szPage = (u16)((szPage&0xff00) | (szPage>>16));
          testcase( szPage<=32768 );
          testcase( szPage>=65536 );
          aFrameCksum[0] = pWal->hdr.aFrameCksum[0];
          aFrameCksum[1] = pWal->hdr.aFrameCksum[1];
        }
      }
  
      sqlite3_free(aFrame);
    }else if( pbZero && nSize==0 ){
      *pbZero = 1;
    }
  }

  pWal->hdr.aFrameCksum[0] = aFrameCksum[0];
  pWal->hdr.aFrameCksum[1] = aFrameCksum[1];

  return rc;
}

static int walOpenWal2(Wal *pWal){
  int rc = SQLITE_OK;
  if( !isOpen(pWal->apWalFd[1]) ){
    int f = (SQLITE_OPEN_READWRITE|SQLITE_OPEN_CREATE|SQLITE_OPEN_WAL);
    rc = sqlite3OsOpen(pWal->pVfs, pWal->zWalName2, pWal->apWalFd[1], f, &f);
  }
  return rc;
}

static int walTruncateWal2(Wal *pWal){
  int bIs;
  int rc;
  assert( !isOpen(pWal->apWalFd[1]) );
  rc = sqlite3OsAccess(pWal->pVfs, pWal->zWalName2, SQLITE_ACCESS_EXISTS, &bIs);
  if( rc==SQLITE_OK && bIs ){
    rc = walOpenWal2(pWal);
    if( rc==SQLITE_OK ){
      rc = sqlite3OsTruncate(pWal->apWalFd[1], 0);
      sqlite3OsClose(pWal->apWalFd[1]);
    }
  }
  return rc;
}

/*
** Recover the wal-index by reading the write-ahead log file. 
**
** This routine first tries to establish an exclusive lock on the
** wal-index to prevent other threads/processes from doing anything
** with the WAL or wal-index while recovery is running.  The
** WAL_RECOVER_LOCK is also held so that other threads will know
** that this thread is running recovery.  If unable to establish
** the necessary locks, this routine returns SQLITE_BUSY.
*/
static int walIndexRecover(Wal *pWal){
  int rc;                         /* Return Code */


  int iLock;                      /* Lock offset to lock for checkpoint */
  u32 nCkpt1 = 0xFFFFFFFF;
  u32 nCkpt2 = 0xFFFFFFFF;
  int bZero = 0;
  WalIndexHdr hdr;

  /* Obtain an exclusive lock on all byte in the locking range not already
  ** locked by the caller. The caller is guaranteed to have locked the
  ** WAL_WRITE_LOCK byte, and may have also locked the WAL_CKPT_LOCK byte.
  ** If successful, the same bytes that are locked here are concurrent before
  ** this function returns.
  */
................................................................................
  }
  if( rc ){
    return rc;
  }

  WALTRACE(("WAL%p: recovery begin...\n", pWal));

  /* Recover the *-wal file. If a valid version-1 header is recovered
  ** from it, do not open the *-wal2 file. Even if it exists.
  **
  ** Otherwise, if the *-wal2 file exists or if the "wal2" flag was 
  ** specified when sqlite3WalOpen() was called, open and recover
  ** the *-wal2 file. Except, if the *-wal file was zero bytes in size,
  ** truncate the *-wal2 to zero bytes in size.
  **
  ** After this block has run, if the *-wal2 file is open the system
  ** starts up in VERSION2 mode. In this case pWal->hdr contains the 
  ** wal-index header considering only *-wal2. Stack variable hdr
  ** contains the wal-index header considering only *-wal. The hash 
  ** tables are populated for both.  
  **
  ** Or, if the *-wal2 file is not open, start up in VERSION1 mode.
  ** pWal->hdr is already populated.
  */
  rc = walIndexRecoverOne(pWal, 0, &nCkpt1, &bZero);
  assert( pWal->hdr.iVersion==0 
      || pWal->hdr.iVersion==WAL_VERSION1 
      || pWal->hdr.iVersion==WAL_VERSION2 
  );
  if( rc==SQLITE_OK && bZero ){
    rc = walTruncateWal2(pWal);
  }

  if( rc==SQLITE_OK && pWal->hdr.iVersion!=WAL_VERSION1 ){
    int bOpen = 1;
    sqlite3_vfs *pVfs = pWal->pVfs;
    if( pWal->hdr.iVersion==0 && pWal->bWal2==0 ){
      rc = sqlite3OsAccess(pVfs, pWal->zWalName2, SQLITE_ACCESS_EXISTS, &bOpen);
    }
    if( rc==SQLITE_OK && bOpen ){
      rc = walOpenWal2(pWal);
      if( rc==SQLITE_OK ){

        hdr = pWal->hdr;
        rc = walIndexRecoverOne(pWal, 1, &nCkpt2, 0);
      }
    }











  }





  if( rc==SQLITE_OK ){
    volatile WalCkptInfo *pInfo;












    if( isOpen(pWal->apWalFd[1]) ){
      /* The case where *-wal2 may follow *-wal */
      if( nCkpt2<=0x0F && nCkpt2==nCkpt1+1 ){
        if( sqlite3Get4byte((u8*)(&pWal->hdr.aSalt[0]))==hdr.aFrameCksum[0]
            && sqlite3Get4byte((u8*)(&pWal->hdr.aSalt[1]))==hdr.aFrameCksum[1]
          ){

          walidxSetFile(&pWal->hdr, 1);
          walidxSetMxFrame(&pWal->hdr, 1, pWal->hdr.mxFrame);
          walidxSetMxFrame(&pWal->hdr, 0, hdr.mxFrame);
        }else{
          pWal->hdr = hdr;
        }




      }else





      /* When *-wal may follow *-wal2 */
      if( (nCkpt2==0x0F && nCkpt1==0) || (nCkpt2<0x0F && nCkpt2==nCkpt1-1) ){
        if( sqlite3Get4byte((u8*)(&hdr.aSalt[0]))==pWal->hdr.aFrameCksum[0]
         && sqlite3Get4byte((u8*)(&hdr.aSalt[1]))==pWal->hdr.aFrameCksum[1]
        ){











          SWAP(WalIndexHdr, pWal->hdr, hdr);
          walidxSetMxFrame(&pWal->hdr, 1, hdr.mxFrame);
        }else{
          walidxSetFile(&pWal->hdr, 1);
          walidxSetMxFrame(&pWal->hdr, 1, pWal->hdr.mxFrame);
          walidxSetMxFrame(&pWal->hdr, 0, 0);
        }
      }else

      /* Fallback */
      if( nCkpt1<=nCkpt2 ){
        pWal->hdr = hdr;
      }else{
        walidxSetFile(&pWal->hdr, 1);












        walidxSetMxFrame(&pWal->hdr, 1, pWal->hdr.mxFrame);






        walidxSetMxFrame(&pWal->hdr, 0, 0);
      }
      pWal->hdr.iVersion = WAL_VERSION2;
    }else{
      pWal->hdr.iVersion = WAL_VERSION1;
    }










    walIndexWriteHdr(pWal);

    /* Reset the checkpoint-header. This is safe because this thread is 
    ** currently holding locks that exclude all other readers, writers and
    ** checkpointers.  */

    pInfo = walCkptInfo(pWal);

    memset((void*)pInfo, 0, sizeof(WalCkptInfo));
    if( 0==isWalMode2(pWal) ){
      int i;
      pInfo->nBackfillAttempted = pWal->hdr.mxFrame;
      pInfo->aReadMark[0] = 0;
      for(i=1; i<WAL_NREADER; i++) pInfo->aReadMark[i] = READMARK_NOT_USED;
      if( pWal->hdr.mxFrame ) pInfo->aReadMark[1] = pWal->hdr.mxFrame;
    }

    /* If more than one frame was recovered from the log file, report an
    ** event via sqlite3_log(). This is to help with identifying performance
    ** problems caused by applications routinely shutting down without
    ** checkpointing the log file.  */

    if( pWal->hdr.nPage ){
      if( isWalMode2(pWal) ){
        sqlite3_log(SQLITE_NOTICE_RECOVER_WAL,
            "recovered (%d,%d) frames from WAL files %s[2] (%s mode)",
            walidxGetMxFrame(&pWal->hdr, 0), walidxGetMxFrame(&pWal->hdr, 1), 
            pWal->zWalName, isWalMode2(pWal) ? "wal2" : "wal"
        );
      }else{
        sqlite3_log(SQLITE_NOTICE_RECOVER_WAL,
            "recovered %d frames from WAL file %s",
            pWal->hdr.mxFrame, pWal->zWalName
        );
      }
    }
  }


  WALTRACE(("WAL%p: recovery %s\n", pWal, rc ? "failed" : "ok"));
  walUnlockExclusive(pWal, iLock, WAL_READ_LOCK(0)-iLock);
  walUnlockExclusive(pWal, WAL_READ_LOCK(1), WAL_NREADER-1);
  return rc;
}

/*
** Close an open wal-index and wal files.
*/
static void walIndexClose(Wal *pWal, int isDelete){
  if( pWal->exclusiveMode==WAL_HEAPMEMORY_MODE || pWal->bShmUnreliable ){
    int i;
    for(i=0; i<pWal->nWiData; i++){
      sqlite3_free((void *)pWal->apWiData[i]);
      pWal->apWiData[i] = 0;
    }
  }
  if( pWal->exclusiveMode!=WAL_HEAPMEMORY_MODE ){
    sqlite3OsShmUnmap(pWal->pDbFd, isDelete);
  }
  sqlite3OsClose(pWal->apWalFd[0]);
  sqlite3OsClose(pWal->apWalFd[1]);
}

/* 
** Open a connection to the WAL file zWalName. The database file must 
** already be opened on connection pDbFd. The buffer that zWalName points
** to must remain valid for the lifetime of the returned Wal* handle.
**
................................................................................
*/
int sqlite3WalOpen(
  sqlite3_vfs *pVfs,              /* vfs module to open wal and wal-index */
  sqlite3_file *pDbFd,            /* The open database file */
  const char *zWalName,           /* Name of the WAL file */
  int bNoShm,                     /* True to run in heap-memory mode */
  i64 mxWalSize,                  /* Truncate WAL to this size on reset */
  int bWal2,                      /* True to open in wal2 mode */
  Wal **ppWal                     /* OUT: Allocated Wal handle */
){
  int rc;                         /* Return Code */
  Wal *pRet;                      /* Object to allocate and return */
  int flags;                      /* Flags passed to OsOpen() */
  int nWalName;                   /* Length of zWalName in bytes */
  int nByte;                      /* Bytes of space to allocate */

  assert( zWalName && zWalName[0] );
  assert( pDbFd );

  /* In the amalgamation, the os_unix.c and os_win.c source files come before
  ** this source file.  Verify that the #defines of the locking byte offsets
  ** in os_unix.c and os_win.c agree with the WALINDEX_LOCK_OFFSET value.
................................................................................
#ifdef WIN_SHM_BASE
  assert( WIN_SHM_BASE==WALINDEX_LOCK_OFFSET );
#endif
#ifdef UNIX_SHM_BASE
  assert( UNIX_SHM_BASE==WALINDEX_LOCK_OFFSET );
#endif

  nWalName = sqlite3Strlen30(zWalName);
  nByte = sizeof(Wal) + pVfs->szOsFile*2 + nWalName+2;

  /* Allocate an instance of struct Wal to return. */
  *ppWal = 0;
  pRet = (Wal*)sqlite3MallocZero(nByte);
  if( !pRet ){
    return SQLITE_NOMEM_BKPT;
  }

  pRet->pVfs = pVfs;
  pRet->apWalFd[0] = (sqlite3_file*)((char*)pRet+sizeof(Wal));
  pRet->apWalFd[1] = (sqlite3_file*)((char*)pRet+sizeof(Wal)+pVfs->szOsFile);
  pRet->pDbFd = pDbFd;
  pRet->readLock = WAL_LOCK_NONE;
  pRet->mxWalSize = mxWalSize;
  pRet->zWalName = zWalName;
  pRet->syncHeader = 1;
  pRet->padToSectorBoundary = 1;
  pRet->exclusiveMode = (bNoShm ? WAL_HEAPMEMORY_MODE: WAL_NORMAL_MODE);
  pRet->bWal2 = bWal2;

  pRet->zWalName2 = (char*)pRet + sizeof(Wal) + 2*pVfs->szOsFile;
  memcpy(pRet->zWalName2, zWalName, nWalName);
  pRet->zWalName2[nWalName] = '2';
  pRet->zWalName2[nWalName+1] = '\0';

  /* Open a file handle on the first write-ahead log file. */
  flags = (SQLITE_OPEN_READWRITE|SQLITE_OPEN_CREATE|SQLITE_OPEN_WAL);
  rc = sqlite3OsOpen(pVfs, zWalName, pRet->apWalFd[0], flags, &flags);
  if( rc==SQLITE_OK && flags&SQLITE_OPEN_READONLY ){
    pRet->readOnly = WAL_RDONLY;
  }

  if( rc!=SQLITE_OK ){
    walIndexClose(pRet, 0);

    sqlite3_free(pRet);
  }else{
    int iDC = sqlite3OsDeviceCharacteristics(pDbFd);
    if( iDC & SQLITE_IOCAP_SEQUENTIAL ){ pRet->syncHeader = 0; }
    if( iDC & SQLITE_IOCAP_POWERSAFE_OVERWRITE ){
      pRet->padToSectorBoundary = 0;
    }
................................................................................
*/
static void walIteratorFree(WalIterator *p){
  sqlite3_free(p);
}

/*
** Construct a WalInterator object that can be used to loop over all 
** pages in wal file iWal following frame nBackfill in ascending order. Frames
** nBackfill or earlier may be included - excluding them is an optimization
** only. The caller must hold the checkpoint lock.
**
** On success, make *pp point to the newly allocated WalIterator object
** and return SQLITE_OK. Otherwise, return an error code. If this routine
** returns an error, the final value of *pp is undefined.
**
** The calling routine should invoke walIteratorFree() to destroy the
** WalIterator object when it has finished with it.
*/
static int walIteratorInit(
  Wal *pWal, 
  int iWal, 
  u32 nBackfill, 
  WalIterator **pp
){
  WalIterator *p;                 /* Return value */
  int nSegment;                   /* Number of segments to merge */
  u32 iLast;                      /* Last frame in log */
  int nByte;                      /* Number of bytes to allocate */
  int i;                          /* Iterator variable */
  int iLastSeg;                   /* Last hash table to iterate though */
  ht_slot *aTmp;                  /* Temp space used by merge-sort */
  int rc = SQLITE_OK;             /* Return Code */
  int iMode = isWalMode2(pWal) ? 2 : 1;

  assert( isWalMode2(pWal) || iWal==0 );
  assert( 0==isWalMode2(pWal) || nBackfill==0 );

  /* This routine only runs while holding the checkpoint lock. And
  ** it only runs if there is actually content in the log (mxFrame>0).
  */
  iLast = walidxGetMxFrame(&pWal->hdr, iWal);
  assert( pWal->ckptLock && iLast>0 );


  if( iMode==2 ){
    iLastSeg = walFramePage2(iWal, iLast);
  }else{
    iLastSeg = walFramePage(iLast);
  }
  nSegment = 1 + (iLastSeg/iMode);

  /* Allocate space for the WalIterator object. */

  nByte = sizeof(WalIterator) 
        + (nSegment-1)*sizeof(struct WalSegment)
        + iLast*sizeof(ht_slot);
  p = (WalIterator *)sqlite3_malloc64(nByte);
  if( !p ){
    return SQLITE_NOMEM_BKPT;
  }
................................................................................
  aTmp = (ht_slot *)sqlite3_malloc64(
      sizeof(ht_slot) * (iLast>HASHTABLE_NPAGE?HASHTABLE_NPAGE:iLast)
  );
  if( !aTmp ){
    rc = SQLITE_NOMEM_BKPT;
  }

  i = iMode==2 ? iWal : walFramePage(nBackfill+1);
  for(; rc==SQLITE_OK && i<=iLastSeg; i+=iMode){
    WalHashLoc sLoc;

    rc = walHashGet(pWal, i, &sLoc);
    if( rc==SQLITE_OK ){
      int j;                      /* Counter variable */
      int nEntry;                 /* Number of entries in this segment */
      ht_slot *aIndex;            /* Sorted index for this segment */
      u32 iZero;

      if( iMode==2 ){
        walExternalDecode(sLoc.iZero+1, &iZero);
        iZero--;
        assert( iZero==0 || i>=2 );
      }else{
        iZero = sLoc.iZero;
      }

      sLoc.aPgno++;

      if( i==iLastSeg ){
        nEntry = (int)(iLast - iZero);
      }else{
        nEntry = (int)((u32*)sLoc.aHash - (u32*)sLoc.aPgno);
      }
      aIndex = &((ht_slot *)&p->aSegment[p->nSegment])[iZero];
      iZero++;
  
      for(j=0; j<nEntry; j++){
        aIndex[j] = (ht_slot)j;
      }
      walMergesort((u32*)sLoc.aPgno, aTmp, aIndex, &nEntry);
      p->aSegment[i/iMode].iZero = iZero;
      p->aSegment[i/iMode].nEntry = nEntry;
      p->aSegment[i/iMode].aIndex = aIndex;
      p->aSegment[i/iMode].aPgno = (u32*)sLoc.aPgno;
    }
  }
  sqlite3_free(aTmp);

  if( rc!=SQLITE_OK ){
    walIteratorFree(p);
    p = 0;
................................................................................
** new wal-index header. It should be passed a pseudo-random value (i.e. 
** one obtained from sqlite3_randomness()).
*/
static void walRestartHdr(Wal *pWal, u32 salt1){
  volatile WalCkptInfo *pInfo = walCkptInfo(pWal);
  int i;                          /* Loop counter */
  u32 *aSalt = pWal->hdr.aSalt;   /* Big-endian salt values */
  assert( isWalMode2(pWal)==0 );
  pWal->nCkpt++;
  pWal->hdr.mxFrame = 0;
  sqlite3Put4byte((u8*)&aSalt[0], 1 + sqlite3Get4byte((u8*)&aSalt[0]));
  memcpy(&pWal->hdr.aSalt[1], &salt1, 4);
  walIndexWriteHdr(pWal);
  pInfo->nBackfill = 0;
  pInfo->nBackfillAttempted = 0;
................................................................................
  WalIterator *pIter = 0;         /* Wal iterator context */
  u32 iDbpage = 0;                /* Next database page to write */
  u32 iFrame = 0;                 /* Wal frame containing data for iDbpage */
  u32 mxSafeFrame;                /* Max frame that can be backfilled */
  u32 mxPage;                     /* Max database page to write */
  int i;                          /* Loop counter */
  volatile WalCkptInfo *pInfo;    /* The checkpoint status information */
  int bWal2 = isWalMode2(pWal);   /* True for wal2 connections */
  int iCkpt = bWal2 ? !walidxGetFile(&pWal->hdr) : 0;

  mxSafeFrame = walidxGetMxFrame(&pWal->hdr, iCkpt);
  szPage = walPagesize(pWal);
  testcase( szPage<=32768 );
  testcase( szPage>=65536 );
  pInfo = walCkptInfo(pWal);
  if( (bWal2==1 && pInfo->nBackfill==0 && mxSafeFrame) 
   || (bWal2==0 && pInfo->nBackfill<mxSafeFrame)
  ){
    sqlite3_file *pWalFd = pWal->apWalFd[iCkpt];
    mxPage = pWal->hdr.nPage;

    /* If this is a wal2 system, check for a reader holding a lock 
    ** preventing this checkpoint operation. If one is found, return
    ** early.  */
    if( bWal2 ){
      rc = walLockExclusive(pWal, WAL_READ_LOCK(1 + iCkpt*2), 1);
      if( rc!=SQLITE_OK ) return rc;
    }

    /* EVIDENCE-OF: R-62920-47450 The busy-handler callback is never invoked
    ** in the SQLITE_CHECKPOINT_PASSIVE mode. */
    assert( eMode!=SQLITE_CHECKPOINT_PASSIVE || xBusy==0 );

    /* If this is a wal system (not wal2), compute in mxSafeFrame the index 
    ** of the last frame of the WAL that is safe to write into the database.
    ** Frames beyond mxSafeFrame might overwrite database pages that are in 
    ** use by active readers and thus cannot be backfilled from the WAL.
    */
    if( bWal2==0 ){
      mxSafeFrame = pWal->hdr.mxFrame;
      mxPage = pWal->hdr.nPage;
      for(i=1; i<WAL_NREADER; i++){
        /* Thread-sanitizer reports that the following is an unsafe read,
        ** as some other thread may be in the process of updating the value
        ** of the aReadMark[] slot. The assumption here is that if that is
        ** happening, the other client may only be increasing the value,
        ** not decreasing it. So assuming either that either the "old" or
        ** "new" version of the value is read, and not some arbitrary value
        ** that would never be written by a real client, things are still 
        ** safe.  */
        u32 y = pInfo->aReadMark[i];
        if( mxSafeFrame>y ){
          assert( y<=pWal->hdr.mxFrame );
          rc = walBusyLock(pWal, xBusy, pBusyArg, WAL_READ_LOCK(i), 1);
          if( rc==SQLITE_OK ){
            pInfo->aReadMark[i] = (i==1 ? mxSafeFrame : READMARK_NOT_USED);
            walUnlockExclusive(pWal, WAL_READ_LOCK(i), 1);
          }else if( rc==SQLITE_BUSY ){
            mxSafeFrame = y;
            xBusy = 0;
          }else{
            goto walcheckpoint_out;
          }
        }
      }
    }

    /* Allocate the iterator */
    if( bWal2 || pInfo->nBackfill<mxSafeFrame ){
      assert( bWal2==0 || pInfo->nBackfill==0 );
      rc = walIteratorInit(pWal, iCkpt, pInfo->nBackfill, &pIter);
      assert( rc==SQLITE_OK || pIter==0 );
    }

    if( pIter
     && (rc = walBusyLock(pWal, xBusy, pBusyArg, WAL_READ_LOCK(0),1))==SQLITE_OK
    ){
      u32 nBackfill = pInfo->nBackfill;

      assert( bWal2==0 || nBackfill==0 );
      pInfo->nBackfillAttempted = mxSafeFrame;


      /* Sync the wal file being checkpointed to disk */
      rc = sqlite3OsSync(pWalFd, CKPT_SYNC_FLAGS(sync_flags));

      /* If the database may grow as a result of this checkpoint, hint
      ** about the eventual size of the db file to the VFS layer.  */

      if( rc==SQLITE_OK ){
        i64 nReq = ((i64)mxPage * szPage);
        i64 nSize;                    /* Current size of database file */
        rc = sqlite3OsFileSize(pWal->pDbFd, &nSize);
        if( rc==SQLITE_OK && nSize<nReq ){
          sqlite3OsFileControlHint(pWal->pDbFd, SQLITE_FCNTL_SIZE_HINT, &nReq);
        }
      }


      /* Iterate through the contents of the WAL, copying data to the db file */
      while( rc==SQLITE_OK && 0==walIteratorNext(pIter, &iDbpage, &iFrame) ){
        i64 iOffset;

        assert( bWal2==1 || walFramePgno(pWal, iFrame)==iDbpage );
        assert( bWal2==0 || walFramePgno2(pWal, iCkpt, iFrame)==iDbpage );

        if( db->u1.isInterrupted ){
          rc = db->mallocFailed ? SQLITE_NOMEM_BKPT : SQLITE_INTERRUPT;
          break;
        }
        if( iFrame<=nBackfill || iFrame>mxSafeFrame || iDbpage>mxPage ){
          assert( bWal2==0 || iDbpage>mxPage );
          continue;
        }
        iOffset = walFrameOffset(iFrame, szPage) + WAL_FRAME_HDRSIZE;
        WALTRACE(("WAL%p: checkpoint frame %d of wal %d to db page %d\n",
              pWal, (int)iFrame, iCkpt, (int)iDbpage
        ));
        /* testcase( IS_BIG_INT(iOffset) ); // requires a 4GiB WAL file */
        rc = sqlite3OsRead(pWalFd, zBuf, szPage, iOffset);
        if( rc!=SQLITE_OK ) break;
        iOffset = (iDbpage-1)*(i64)szPage;
        testcase( IS_BIG_INT(iOffset) );
        rc = sqlite3OsWrite(pWal->pDbFd, zBuf, szPage, iOffset);
        if( rc!=SQLITE_OK ) break;
      }

      /* If work was actually accomplished, truncate the db file, sync the wal
      ** file and set WalCkptInfo.nBackfill to indicate so. */
      if( rc==SQLITE_OK && (bWal2 || mxSafeFrame==walIndexHdr(pWal)->mxFrame) ){
        if( !bWal2 ){
          i64 szDb = pWal->hdr.nPage*(i64)szPage;
          testcase( IS_BIG_INT(szDb) );
          rc = sqlite3OsTruncate(pWal->pDbFd, szDb);
        }
        if( rc==SQLITE_OK ){
          rc = sqlite3OsSync(pWal->pDbFd, CKPT_SYNC_FLAGS(sync_flags));
        }
      }
      if( rc==SQLITE_OK ){
        pInfo->nBackfill = bWal2 ? 1 : mxSafeFrame;
      }


      /* Release the reader lock held while backfilling */
      walUnlockExclusive(pWal, WAL_READ_LOCK(bWal2 ? 1 + iCkpt*2 : 0), 1);
    }

    if( rc==SQLITE_BUSY ){
      /* Reset the return code so as not to report a checkpoint failure
      ** just because there are active readers.  */
      rc = SQLITE_OK;
    }
................................................................................
  }

  /* If this is an SQLITE_CHECKPOINT_RESTART or TRUNCATE operation, and the
  ** entire wal file has been copied into the database file, then block 
  ** until all readers have finished using the wal file. This ensures that 
  ** the next process to write to the database restarts the wal file.
  */
  if( bWal2==0 && rc==SQLITE_OK && eMode!=SQLITE_CHECKPOINT_PASSIVE ){
    assert( pWal->writeLock );
    if( pInfo->nBackfill<pWal->hdr.mxFrame ){
      rc = SQLITE_BUSY;
    }else if( eMode>=SQLITE_CHECKPOINT_RESTART ){
      u32 salt1;
      sqlite3_randomness(4, &salt1);
      assert( pInfo->nBackfill==pWal->hdr.mxFrame );
................................................................................
          ** writer clients should see that the entire log file has been
          ** checkpointed and behave accordingly. This seems unsafe though,
          ** as it would leave the system in a state where the contents of
          ** the wal-index header do not match the contents of the 
          ** file-system. To avoid this, update the wal-index header to
          ** indicate that the log file contains zero valid frames.  */
          walRestartHdr(pWal, salt1);
          rc = sqlite3OsTruncate(pWal->apWalFd[0], 0);
        }
        walUnlockExclusive(pWal, WAL_READ_LOCK(1), WAL_NREADER-1);
      }
    }
  }

 walcheckpoint_out:
................................................................................
}

/*
** If the WAL file is currently larger than nMax bytes in size, truncate
** it to exactly nMax bytes. If an error occurs while doing so, ignore it.
*/
static void walLimitSize(Wal *pWal, i64 nMax){
  if( isWalMode2(pWal)==0 ){
    i64 sz;
    int rx;
    sqlite3BeginBenignMalloc();
    rx = sqlite3OsFileSize(pWal->apWalFd[0], &sz);
    if( rx==SQLITE_OK && (sz > nMax ) ){
      rx = sqlite3OsTruncate(pWal->apWalFd[0], nMax);
    }
    sqlite3EndBenignMalloc();
    if( rx ){
      sqlite3_log(rx, "cannot limit WAL size: %s", pWal->zWalName);
    }
  }
}

/*
** Close a connection to a log file.
*/
int sqlite3WalClose(
................................................................................
    ** the wal and wal-index files.
    **
    ** The EXCLUSIVE lock is not released before returning.
    */
    if( zBuf!=0
     && SQLITE_OK==(rc = sqlite3OsLock(pWal->pDbFd, SQLITE_LOCK_EXCLUSIVE))
    ){
      int i;
      if( pWal->exclusiveMode==WAL_NORMAL_MODE ){
        pWal->exclusiveMode = WAL_EXCLUSIVE_MODE;
      }
      for(i=0; rc==SQLITE_OK && i<2; i++){
        rc = sqlite3WalCheckpoint(pWal, db, 
            SQLITE_CHECKPOINT_PASSIVE, 0, 0, sync_flags, nBuf, zBuf, 0, 0
        );
        if( rc==SQLITE_OK ){
          int bPersist = -1;
          sqlite3OsFileControlHint(
              pWal->pDbFd, SQLITE_FCNTL_PERSIST_WAL, &bPersist
          );
          if( bPersist!=1 ){
            /* Try to delete the WAL file if the checkpoint completed and
            ** fsyned (rc==SQLITE_OK) and if we are not in persistent-wal
            ** mode (!bPersist) */
            isDelete = 1;
          }else if( pWal->mxWalSize>=0 ){
            /* Try to truncate the WAL file to zero bytes if the checkpoint
            ** completed and fsynced (rc==SQLITE_OK) and we are in persistent
            ** WAL mode (bPersist) and if the PRAGMA journal_size_limit is a
            ** non-negative value (pWal->mxWalSize>=0).  Note that we truncate
            ** to zero bytes as truncating to the journal_size_limit might
            ** leave a corrupt WAL file on disk. */
            walLimitSize(pWal, 0);
          }
        }

        if( isWalMode2(pWal)==0 ) break;

        walCkptInfo(pWal)->nBackfill = 0;
        walidxSetFile(&pWal->hdr, !walidxGetFile(&pWal->hdr));
        pWal->writeLock = 1;
        walIndexWriteHdr(pWal);
        pWal->writeLock = 0;
      }
    }

    walIndexClose(pWal, isDelete);

    if( isDelete ){
      sqlite3BeginBenignMalloc();
      sqlite3OsDelete(pWal->pVfs, pWal->zWalName, 0);
      sqlite3OsDelete(pWal->pVfs, pWal->zWalName2, 0);
      sqlite3EndBenignMalloc();
    }
    WALTRACE(("WAL%p: closed\n", pWal));
    sqlite3_free((void *)pWal->apWiData);
    sqlite3_free(pWal);
  }
  return rc;
................................................................................
    }
  }

  /* If the header is read successfully, check the version number to make
  ** sure the wal-index was not constructed with some future format that
  ** this version of SQLite cannot understand.
  */
  if( badHdr==0 
   && pWal->hdr.iVersion!=WAL_VERSION1 && pWal->hdr.iVersion!=WAL_VERSION2
  ){
    rc = SQLITE_CANTOPEN_BKPT;
  }
  if( pWal->bShmUnreliable ){
    if( rc!=SQLITE_OK ){
      walIndexClose(pWal, 0);
      pWal->bShmUnreliable = 0;
      assert( pWal->nWiData>0 && pWal->apWiData[0]==0 );
................................................................................
  ** into pWal->hdr.
  */
  memcpy(&pWal->hdr, (void*)walIndexHdr(pWal), sizeof(WalIndexHdr));

  /* Make sure some writer hasn't come in and changed the WAL file out
  ** from under us, then disconnected, while we were not looking.
  */
  rc = sqlite3OsFileSize(pWal->apWalFd[0], &szWal);
  if( rc!=SQLITE_OK ){
    goto begin_unreliable_shm_out;
  }
  if( szWal<WAL_HDRSIZE ){
    /* If the wal file is too small to contain a wal-header and the
    ** wal-index header has mxFrame==0, then it must be safe to proceed
    ** reading the database file only. However, the page cache cannot
................................................................................
    ** since this client's last read transaction.  */
    *pChanged = 1;
    rc = (pWal->hdr.mxFrame==0 ? SQLITE_OK : WAL_RETRY);
    goto begin_unreliable_shm_out;
  }

  /* Check the salt keys at the start of the wal file still match. */
  rc = sqlite3OsRead(pWal->apWalFd[0], aBuf, WAL_HDRSIZE, 0);
  if( rc!=SQLITE_OK ){
    goto begin_unreliable_shm_out;
  }
  if( memcmp(&pWal->hdr.aSalt, &aBuf[16], 8) ){
    /* Some writer has wrapped the WAL file while we were not looking.
    ** Return WAL_RETRY which will cause the in-memory WAL-index to be
    ** rebuilt. */
................................................................................
      iOffset+szFrame<=szWal; 
      iOffset+=szFrame
  ){
    u32 pgno;                   /* Database page number for frame */
    u32 nTruncate;              /* dbsize field from frame header */

    /* Read and decode the next log frame. */
    rc = sqlite3OsRead(pWal->apWalFd[0], aFrame, szFrame, iOffset);
    if( rc!=SQLITE_OK ) break;
    if( !walDecodeFrame(pWal, &pgno, &nTruncate, aData, aFrame) ) break;

    /* If nTruncate is non-zero, then a complete transaction has been
    ** appended to this wal file. Set rc to WAL_RETRY and break out of
    ** the loop.  */
    if( nTruncate ){
................................................................................
** checkpoint process do as much work as possible.  This routine might
** update values of the aReadMark[] array in the header, but if it does
** so it takes care to hold an exclusive lock on the corresponding
** WAL_READ_LOCK() while changing values.
*/
static int walTryBeginRead(Wal *pWal, int *pChanged, int useWal, int cnt){
  volatile WalCkptInfo *pInfo;    /* Checkpoint information in wal-index */



  int rc = SQLITE_OK;             /* Return code  */


  assert( pWal->readLock==WAL_LOCK_NONE );     /* Not currently locked */

  /* useWal may only be set for read/write connections */
  assert( (pWal->readOnly & WAL_SHM_RDONLY)==0 || useWal==0 );

  /* Take steps to avoid spinning forever if there is a protocol error.
  **
  ** Circumstances that cause a RETRY should only last for the briefest
................................................................................
      return walBeginShmUnreliable(pWal, pChanged);
    }
  }

  assert( pWal->nWiData>0 );
  assert( pWal->apWiData[0]!=0 );
  pInfo = walCkptInfo(pWal);
  if( isWalMode2(pWal) ){
    int eLock = 1 + (walidxGetFile(&pWal->hdr)*2);
    if( pInfo->nBackfill==0 ){
      eLock += walidxGetMxFrame(&pWal->hdr, !walidxGetFile(&pWal->hdr))>0;
    }
    rc = walLockReader(pWal, eLock, 1);
    if( rc!=SQLITE_OK ){
      return rc;
    }

    walShmBarrier(pWal);
    if( memcmp((void *)walIndexHdr(pWal), &pWal->hdr, sizeof(WalIndexHdr)) ){
      walLockReader(pWal, eLock, 0);
      return WAL_RETRY;
    }else{
      pWal->readLock = eLock;
    }
    assert( pWal->minFrame==0 && walFramePage(pWal->minFrame)==0 );
  }else{
    u32 mxReadMark;               /* Largest aReadMark[] value */
    int mxI;                      /* Index of largest aReadMark[] value */
    int i;                        /* Loop counter */
    u32 mxFrame;                  /* Wal frame to lock to */
    if( !useWal && pInfo->nBackfill==pWal->hdr.mxFrame
  #ifdef SQLITE_ENABLE_SNAPSHOT
     && (pWal->pSnapshot==0 || pWal->hdr.mxFrame==0)
  #endif
    ){
      /* The WAL has been completely backfilled (or it is empty).
      ** and can be safely ignored.
      */
      rc = walLockShared(pWal, WAL_READ_LOCK(0));
      walShmBarrier(pWal);
      if( rc==SQLITE_OK ){
        if( memcmp((void *)walIndexHdr(pWal), &pWal->hdr,sizeof(WalIndexHdr)) ){
          /* It is not safe to allow the reader to continue here if frames
          ** may have been appended to the log before READ_LOCK(0) was obtained.
          ** When holding READ_LOCK(0), the reader ignores the entire log file,
          ** which implies that the database file contains a trustworthy
          ** snapshot. Since holding READ_LOCK(0) prevents a checkpoint from
          ** happening, this is usually correct.
          **
          ** However, if frames have been appended to the log (or if the log 
          ** is wrapped and written for that matter) before the READ_LOCK(0)
          ** is obtained, that is not necessarily true. A checkpointer may
          ** have started to backfill the appended frames but crashed before
          ** it finished. Leaving a corrupt image in the database file.
          */
          walUnlockShared(pWal, WAL_READ_LOCK(0));
          return WAL_RETRY;
        }
        pWal->readLock = 0;
        return SQLITE_OK;
      }else if( rc!=SQLITE_BUSY ){
        return rc;
      }
    }
  
    /* If we get this far, it means that the reader will want to use
    ** the WAL to get at content from recent commits.  The job now is
    ** to select one of the aReadMark[] entries that is closest to
    ** but not exceeding pWal->hdr.mxFrame and lock that entry.
    */
    mxReadMark = 0;
    mxI = 0;
    mxFrame = pWal->hdr.mxFrame;
  #ifdef SQLITE_ENABLE_SNAPSHOT
    if( pWal->pSnapshot && pWal->pSnapshot->mxFrame<mxFrame ){
      mxFrame = pWal->pSnapshot->mxFrame;
    }
  #endif
    for(i=1; i<WAL_NREADER; i++){
      u32 thisMark = AtomicLoad(pInfo->aReadMark+i);
      if( mxReadMark<=thisMark && thisMark<=mxFrame ){
        assert( thisMark!=READMARK_NOT_USED );
        mxReadMark = thisMark;
        mxI = i;
      }
    }
    if( (pWal->readOnly & WAL_SHM_RDONLY)==0
     && (mxReadMark<mxFrame || mxI==0)
    ){
      for(i=1; i<WAL_NREADER; i++){
        rc = walLockExclusive(pWal, WAL_READ_LOCK(i), 1);
        if( rc==SQLITE_OK ){
          mxReadMark = AtomicStore(pInfo->aReadMark+i,mxFrame);
          mxI = i;
          walUnlockExclusive(pWal, WAL_READ_LOCK(i), 1);
          break;
        }else if( rc!=SQLITE_BUSY ){
          return rc;
        }
      }
    }
    if( mxI==0 ){
      assert( rc==SQLITE_BUSY || (pWal->readOnly & WAL_SHM_RDONLY)!=0 );
      return rc==SQLITE_BUSY ? WAL_RETRY : SQLITE_READONLY_CANTINIT;
    }
  
    rc = walLockShared(pWal, WAL_READ_LOCK(mxI));
    if( rc ){
      return rc==SQLITE_BUSY ? WAL_RETRY : rc;
    }
    /* Now that the read-lock has been obtained, check that neither the
    ** value in the aReadMark[] array or the contents of the wal-index
    ** header have changed.
    **
    ** It is necessary to check that the wal-index header did not change
    ** between the time it was read and when the shared-lock was obtained
    ** on WAL_READ_LOCK(mxI) was obtained to account for the possibility
    ** that the log file may have been wrapped by a writer, or that frames
    ** that occur later in the log than pWal->hdr.mxFrame may have been
    ** copied into the database by a checkpointer. If either of these things
    ** happened, then reading the database with the current value of
    ** pWal->hdr.mxFrame risks reading a corrupted snapshot. So, retry
    ** instead.
    **
    ** Before checking that the live wal-index header has not changed
    ** since it was read, set Wal.minFrame to the first frame in the wal
    ** file that has not yet been checkpointed. This client will not need
    ** to read any frames earlier than minFrame from the wal file - they
    ** can be safely read directly from the database file.
    **
    ** Because a ShmBarrier() call is made between taking the copy of 
    ** nBackfill and checking that the wal-header in shared-memory still
    ** matches the one cached in pWal->hdr, it is guaranteed that the 
    ** checkpointer that set nBackfill was not working with a wal-index
    ** header newer than that cached in pWal->hdr. If it were, that could
    ** cause a problem. The checkpointer could omit to checkpoint
    ** a version of page X that lies before pWal->minFrame (call that version
    ** A) on the basis that there is a newer version (version B) of the same
    ** page later in the wal file. But if version B happens to like past
    ** frame pWal->hdr.mxFrame - then the client would incorrectly assume
    ** that it can read version A from the database file. However, since
    ** we can guarantee that the checkpointer that set nBackfill could not
    ** see any pages past pWal->hdr.mxFrame, this problem does not come up.
    */
    pWal->minFrame = AtomicLoad(&pInfo->nBackfill)+1;
    walShmBarrier(pWal);
    if( AtomicLoad(pInfo->aReadMark+mxI)!=mxReadMark
     || memcmp((void *)walIndexHdr(pWal), &pWal->hdr, sizeof(WalIndexHdr))
    ){
      walUnlockShared(pWal, WAL_READ_LOCK(mxI));
      return WAL_RETRY;
    }else{
      assert( mxReadMark<=pWal->hdr.mxFrame );
      pWal->readLock = (i16)mxI;
    }
  }
  return rc;
}

#ifdef SQLITE_ENABLE_SNAPSHOT
/*
** Attempt to reduce the value of the WalCkptInfo.nBackfillAttempted 
................................................................................
          rc = walHashGet(pWal, walFramePage(i), &sLoc);
          if( rc!=SQLITE_OK ) break;
          pgno = sLoc.aPgno[i-sLoc.iZero];
          iDbOff = (i64)(pgno-1) * szPage;

          if( iDbOff+szPage<=szDb ){
            iWalOff = walFrameOffset(i, szPage) + WAL_FRAME_HDRSIZE;
            rc = sqlite3OsRead(pWal->apWalFd[0], pBuf1, szPage, iWalOff);

            if( rc==SQLITE_OK ){
              rc = sqlite3OsRead(pWal->pDbFd, pBuf2, szPage, iDbOff);
            }

            if( rc!=SQLITE_OK || 0==memcmp(pBuf1, pBuf2, szPage) ){
              break;
................................................................................
  do{
    rc = walTryBeginRead(pWal, pChanged, 0, ++cnt);
  }while( rc==WAL_RETRY );
  testcase( (rc&0xff)==SQLITE_BUSY );
  testcase( (rc&0xff)==SQLITE_IOERR );
  testcase( rc==SQLITE_PROTOCOL );
  testcase( rc==SQLITE_OK );
  
  if( rc==SQLITE_OK && pWal->hdr.iVersion==WAL_VERSION2 ){
    rc = walOpenWal2(pWal);
  }

  pWal->nPriorFrame = pWal->hdr.mxFrame;
#ifdef SQLITE_ENABLE_SNAPSHOT
  if( rc==SQLITE_OK ){
    if( pSnapshot && memcmp(pSnapshot, &pWal->hdr, sizeof(WalIndexHdr))!=0 ){
      /* At this point the client has a lock on an aReadMark[] slot holding
      ** a value equal to or smaller than pSnapshot->mxFrame, but pWal->hdr
................................................................................

/*
** Finish with a read transaction.  All this does is release the
** read-lock.
*/
void sqlite3WalEndReadTransaction(Wal *pWal){
  sqlite3WalEndWriteTransaction(pWal);
  if( pWal->readLock!=WAL_LOCK_NONE ){
    if( isWalMode2(pWal) ){
      (void)walLockReader(pWal, pWal->readLock, 0);
    }else{
      walUnlockShared(pWal, WAL_READ_LOCK(pWal->readLock));
    }
    pWal->readLock = WAL_LOCK_NONE;
  }
}

/* Search hash table iHash for an entry matching page number
** pgno. Each call to this function searches a single hash table
** (each hash table indexes up to HASHTABLE_NPAGE frames).
**
** This code might run concurrently to the code in walIndexAppend()
** that adds entries to the wal-index (and possibly to this hash 
** table). This means the value just read from the hash 
** slot (aHash[iKey]) may have been added before or after the 
** current read transaction was opened. Values added after the
** read transaction was opened may have been written incorrectly -
** i.e. these slots may contain garbage data. However, we assume
** that any slots written before the current read transaction was
** opened remain unmodified.
**
** For the reasons above, the if(...) condition featured in the inner
** loop of the following block is more stringent that would be required 
** if we had exclusive access to the hash-table:
**
**   (aPgno[iFrame]==pgno): 
**     This condition filters out normal hash-table collisions.
**
**   (iFrame<=iLast): 
**     This condition filters out entries that were added to the hash
**     table after the current read-transaction had started.
*/
static int walSearchHash(
  Wal *pWal, 
  u32 iLast,
  int iHash, 
  Pgno pgno, 
  u32 *piRead
){
  WalHashLoc sLoc;                /* Hash table location */
  int iKey;                       /* Hash slot index */
  int nCollide;                   /* Number of hash collisions remaining */
  int rc;                         /* Error code */

  rc = walHashGet(pWal, iHash, &sLoc);
  if( rc!=SQLITE_OK ){
    return rc;
  }
  nCollide = HASHTABLE_NSLOT;
  for(iKey=walHash(pgno); sLoc.aHash[iKey]; iKey=walNextHash(iKey)){
    u32 iFrame = sLoc.aHash[iKey] + sLoc.iZero;
    if( iFrame<=iLast 
     && iFrame>=pWal->minFrame 
     && sLoc.aPgno[sLoc.aHash[iKey]]==pgno 
    ){
      assert( iFrame>*piRead || CORRUPT_DB );
      *piRead = iFrame;
    }
    if( (nCollide--)==0 ){
      return SQLITE_CORRUPT_BKPT;
    }
  }

  return SQLITE_OK;
}

static int walSearchWal(
  Wal *pWal, 
  int iWal, 
  Pgno pgno, 
  u32 *piRead
){
  int rc = SQLITE_OK;
  int bWal2 = isWalMode2(pWal);
  u32 iLast = walidxGetMxFrame(&pWal->hdr, iWal);
  if( iLast ){
    int iHash;
    int iMinHash = walFramePage(pWal->minFrame);
    u32 iExternal = bWal2 ? walExternalEncode(iWal, iLast) : iLast;
    assert( bWal2==0 || pWal->minFrame==0 );
    for(iHash=walFramePage(iExternal); 
        iHash>=iMinHash && *piRead==0; 
        iHash-=(1+bWal2)
    ){
      rc = walSearchHash(pWal, iExternal, iHash, pgno, piRead);
      if( rc!=SQLITE_OK ) break;
    }
  }
  return rc;
}

/*
** Search the wal file for page pgno. If found, set *piRead to the frame that
** contains the page. Otherwise, if pgno is not in the wal file, set *piRead
** to zero.
**
** Return SQLITE_OK if successful, or an error code if an error occurs. If an
................................................................................
** error does occur, the final value of *piRead is undefined.
*/
int sqlite3WalFindFrame(
  Wal *pWal,                      /* WAL handle */
  Pgno pgno,                      /* Database page number to read data for */
  u32 *piRead                     /* OUT: Frame number (or zero) */
){
  int bWal2 = isWalMode2(pWal);
  int iApp = walidxGetFile(&pWal->hdr);
  int rc = SQLITE_OK;
  u32 iRead = 0;                  /* If !=0, WAL frame to return data from */




  /* This routine is only be called from within a read transaction. */
  assert( pWal->readLock!=WAL_LOCK_NONE );

  /* If this is a wal2 system, the client must have a partial-wal lock 
  ** on wal file iApp. Or if it is a wal system, iApp==0 must be true.  */
  assert( bWal2==0 || iApp==1
       || pWal->readLock==WAL_LOCK_PART1 || pWal->readLock==WAL_LOCK_PART1_FULL2


  );
  assert( bWal2==0 || iApp==0
       || pWal->readLock==WAL_LOCK_PART2 || pWal->readLock==WAL_LOCK_PART2_FULL1
  );
  assert( bWal2 || iApp==0 );

  /* Return early if read-lock 0 is held. */
  if( (pWal->readLock==0 && pWal->bShmUnreliable==0) ){
    *piRead = 0;
    return SQLITE_OK;
  }






  /* Search the wal file that the client holds a partial lock on first */
  rc = walSearchWal(pWal, iApp, pgno, &iRead);



























  /* If the requested page was not found, no error has occured, and 
  ** the client holds a full-wal lock on the other wal file, search it
  ** too.  */
  if( rc==SQLITE_OK && bWal2 && iRead==0 && (
        pWal->readLock==WAL_LOCK_PART1_FULL2 
     || pWal->readLock==WAL_LOCK_PART2_FULL1
  )){
    rc = walSearchWal(pWal, !iApp, pgno, &iRead);
  }












#if defined(SQLITE_TEST) && defined(SQLITE_DEBUG)
  if( iRead ){ 
    u32 iFrame;
    int iWal = walExternalDecode(iRead, &iFrame);
    WALTRACE(("WAL%p: page %d @ frame %d wal %d\n",pWal,(int)pgno,iFrame,iWal));
  }else{
    WALTRACE(("WAL%p: page %d not found\n", pWal, (int)pgno));
  }
#endif

#ifdef SQLITE_ENABLE_EXPENSIVE_ASSERT
  /* If expensive assert() statements are available, do a linear search
  ** of the wal-index file content. Make sure the results agree with the
  ** result obtained using the hash indexes above.  
  **
  ** TODO: This is broken for wal2.
  */
  if( rc==SQLITE_OK ){
    u32 iRead2 = 0;
    u32 iTest;
    assert( pWal->bShmUnreliable || pWal->minFrame>0 );
    for(iTest=iLast; iTest>=pWal->minFrame && iTest>0; iTest--){
      if( walFramePgno(pWal, iTest)==pgno ){
        iRead2 = iTest;
................................................................................
/*
** Read the contents of frame iRead from the wal file into buffer pOut
** (which is nOut bytes in size). Return SQLITE_OK if successful, or an
** error code otherwise.
*/
int sqlite3WalReadFrame(
  Wal *pWal,                      /* WAL handle */
  u32 iExternal,                  /* Frame to read */
  int nOut,                       /* Size of buffer pOut in bytes */
  u8 *pOut                        /* Buffer to write page data to */
){
  int sz;
  int iWal = 0;
  u32 iRead;
  i64 iOffset;

  /* Figure out the page size */
  sz = pWal->hdr.szPage;
  sz = (sz&0xfe00) + ((sz&0x0001)<<16);
  testcase( sz<=32768 );
  testcase( sz>=65536 );

  if( isWalMode2(pWal) ){
    /* Figure out which of the two wal files, and the frame within, that 
    ** iExternal refers to.  */
    iWal = walExternalDecode(iExternal, &iRead);
  }else{
    iRead = iExternal;
  }

  WALTRACE(("WAL%p: reading frame %d wal %d\n", pWal, iRead, iWal));
  iOffset = walFrameOffset(iRead, sz) + WAL_FRAME_HDRSIZE;
  /* testcase( IS_BIG_INT(iOffset) ); // requires a 4GiB WAL */
  return sqlite3OsRead(pWal->apWalFd[iWal], pOut, (nOut>sz?sz:nOut), iOffset);
}

/* 
** Return the size of the database in pages (or zero, if unknown).
*/
Pgno sqlite3WalDbsize(Wal *pWal){
  if( pWal && ALWAYS(pWal->readLock!=WAL_LOCK_NONE) ){
    return pWal->hdr.nPage;
  }
  return 0;
}

/*
** Take the WRITER lock on the WAL file. Return SQLITE_OK if successful,
................................................................................
              u8 aNew[4];
              u8 *aOld = &((u8*)pPage1->pData)[40];
              int sz;
              i64 iOffset;
              sz = pWal->hdr.szPage;
              sz = (sz&0xfe00) + ((sz&0x0001)<<16);
              iOffset = walFrameOffset(i+sLoc.iZero, sz) + WAL_FRAME_HDRSIZE+40;
              rc = sqlite3OsRead(pWal->apWalFd[0], aNew, sizeof(aNew), iOffset);
              if( rc==SQLITE_OK && memcmp(aOld, aNew, sizeof(aNew)) ){
                rc = SQLITE_BUSY_SNAPSHOT;
              }
            }else if( sqlite3BitvecTestNotNull(pAllRead, sLoc.aPgno[i]) ){
              *piConflict = sLoc.aPgno[i];
              rc = SQLITE_BUSY_SNAPSHOT;
            }else if( (pPg = sqlite3PagerLookup(pPager, sLoc.aPgno[i])) ){
................................................................................
**
** Otherwise, if the callback function does not return an error, this
** function returns SQLITE_OK.
*/
int sqlite3WalUndo(Wal *pWal, int (*xUndo)(void *, Pgno), void *pUndoCtx){
  int rc = SQLITE_OK;
  if( pWal->writeLock ){
    int iWal = walidxGetFile(&pWal->hdr);
    Pgno iMax = walidxGetMxFrame(&pWal->hdr, iWal);
    Pgno iNew;
    Pgno iFrame;

    assert( isWalMode2(pWal) || iWal==0 );

    /* Restore the clients cache of the wal-index header to the state it
    ** was in before the client began writing to the database. 
    */
    memcpy(&pWal->hdr, (void *)walIndexHdr(pWal), sizeof(WalIndexHdr));
    assert( walidxGetFile(&pWal->hdr)==iWal );
    iNew = walidxGetMxFrame(&pWal->hdr, walidxGetFile(&pWal->hdr));


    for(iFrame=iNew+1; ALWAYS(rc==SQLITE_OK) && iFrame<=iMax; iFrame++){


      /* This call cannot fail. Unless the page for which the page number
      ** is passed as the second argument is (a) in the cache and 
      ** (b) has an outstanding reference, then xUndo is either a no-op
      ** (if (a) is false) or simply expels the page from the cache (if (b)
      ** is false).
      **
      ** If the upper layer is doing a rollback, it is guaranteed that there
      ** are no outstanding references to any page other than page 1. And
      ** page 1 is never written to the log until the transaction is
      ** committed. As a result, the call to xUndo may not fail.
      */
      Pgno pgno;
      if( isWalMode2(pWal) ){
        pgno = walFramePgno2(pWal, iWal, iFrame);
      }else{
        pgno = walFramePgno(pWal, iFrame);
      }
      assert( pgno!=1 );
      rc = xUndo(pUndoCtx, pgno);
    }
    if( iMax!=iNew ) walCleanupHash(pWal);
  }
  return rc;
}

/* 
** Argument aWalData must point to an array of WAL_SAVEPOINT_NDATA u32 
** values. This function populates the array with values required to 
** "rollback" the write position of the WAL handle back to the current 
** point in the event of a savepoint rollback (via WalSavepointUndo()).
*/
void sqlite3WalSavepoint(Wal *pWal, u32 *aWalData){
  int iWal = walidxGetFile(&pWal->hdr);
  assert( pWal->writeLock );
  assert( isWalMode2(pWal) || iWal==0 );
  aWalData[0] = walidxGetMxFrame(&pWal->hdr, iWal);
  aWalData[1] = pWal->hdr.aFrameCksum[0];
  aWalData[2] = pWal->hdr.aFrameCksum[1];

  aWalData[3] = isWalMode2(pWal) ? iWal : pWal->nCkpt;
}

/* 
** Move the write position of the WAL back to the point identified by
** the values in the aWalData[] array. aWalData must point to an array
** of WAL_SAVEPOINT_NDATA u32 values that has been previously populated
** by a call to WalSavepoint().
*/
int sqlite3WalSavepointUndo(Wal *pWal, u32 *aWalData){
  int rc = SQLITE_OK;
  int iWal = walidxGetFile(&pWal->hdr);
  int iCmp = isWalMode2(pWal) ? iWal : pWal->nCkpt;

  assert( pWal->writeLock || aWalData[0]==pWal->hdr.mxFrame );

  assert( isWalMode2(pWal) || iWal==0 );
  assert( aWalData[3]!=iCmp || aWalData[0]<=walidxGetMxFrame(&pWal->hdr,iWal) );

  if( aWalData[3]!=iCmp ){
    /* This savepoint was opened immediately after the write-transaction
    ** was started. Right after that, the writer decided to wrap around
    ** to the start of the log. Update the savepoint values to match.
    */
    aWalData[0] = 0;
    aWalData[3] = iCmp;
  }

  if( aWalData[0]<walidxGetMxFrame(&pWal->hdr, iWal) ){
    walidxSetMxFrame(&pWal->hdr, iWal, aWalData[0]);
    pWal->hdr.aFrameCksum[0] = aWalData[1];
    pWal->hdr.aFrameCksum[1] = aWalData[2];
    walCleanupHash(pWal);
  }

  return rc;
}

/*
** This function is used in wal2 mode.
**
** This function is called when writer pWal is just about to start 
** writing out frames. The "other" wal file (wal file !pWal->hdr.iAppend)
** has been fully checkpointed. This function returns SQLITE_OK if there
** are no readers preventing the writer from switching to the other wal
** file. Or SQLITE_BUSY if there are.
*/
static int walRestartOk(Wal *pWal){
  int rc;                                        /* Return code */
  int iApp = walidxGetFile(&pWal->hdr);          /* Current WAL file */

  /* No reader can be doing a "partial" read of wal file !iApp - in that
  ** case it would not have been possible to checkpoint the file. So
  ** it is only necessary to test for "full" readers. See the comment
  ** above walLockReader() function for exactly what this means in terms
  ** of locks.  */
  int i = (iApp==0) ? 2 : 4;

  rc = walLockExclusive(pWal, WAL_READ_LOCK(i), 1);
  if( rc==SQLITE_OK ){
    walUnlockExclusive(pWal, WAL_READ_LOCK(i), 1);
  }
  return rc;
}

/*
** This function is called just before writing a set of frames to the log
** file (see sqlite3WalFrames()). It checks to see if, instead of appending
** to the current log file, it is possible and desirable to switch to the



** other log file and write the new transaction to the start of it.
** If so, the wal-index header is updated accordingly - both in heap memory
** and in the *-shm file.
**
** SQLITE_OK is returned if no error is encountered (regardless of whether
** or not the wal-index header is modified). An SQLite error code is returned
** if an error occurs.
*/
static int walRestartLog(Wal *pWal){
  int rc = SQLITE_OK;

  if( isWalMode2(pWal) ){
    int iApp = walidxGetFile(&pWal->hdr);
    int nWalSize = WAL_DEFAULT_WALSIZE;
    if( pWal->mxWalSize>0 ){
      nWalSize = (pWal->mxWalSize-WAL_HDRSIZE+pWal->szPage+WAL_FRAME_HDRSIZE-1) 
        / (pWal->szPage+WAL_FRAME_HDRSIZE);
      nWalSize = MAX(nWalSize, 1);
    }

    if( walidxGetMxFrame(&pWal->hdr, iApp)>=nWalSize ){
      volatile WalCkptInfo *pInfo = walCkptInfo(pWal);
      if( walidxGetMxFrame(&pWal->hdr, !iApp)==0 || pInfo->nBackfill ){
        rc = walRestartOk(pWal);
        if( rc==SQLITE_OK ){
          iApp = !iApp;
          pWal->nCkpt++;
          walidxSetFile(&pWal->hdr, iApp);
          walidxSetMxFrame(&pWal->hdr, iApp, 0);
          sqlite3Put4byte((u8*)&pWal->hdr.aSalt[0], pWal->hdr.aFrameCksum[0]);
          sqlite3Put4byte((u8*)&pWal->hdr.aSalt[1], pWal->hdr.aFrameCksum[1]);
          walIndexWriteHdr(pWal);
          pInfo->nBackfill = 0;
          walLockReader(pWal, pWal->readLock, 0);
          pWal->readLock = iApp ? WAL_LOCK_PART2_FULL1 : WAL_LOCK_PART1_FULL2;
          rc = walLockReader(pWal, pWal->readLock, 1);
        }else if( rc==SQLITE_BUSY ){
          rc = SQLITE_OK;
        }
      }
    }
  }else if( pWal->readLock==0 ){
    volatile WalCkptInfo *pInfo = walCkptInfo(pWal);
    assert( pInfo->nBackfill==pWal->hdr.mxFrame );
    if( pInfo->nBackfill>0 ){
      u32 salt1;
      sqlite3_randomness(4, &salt1);
      rc = walLockExclusive(pWal, WAL_READ_LOCK(1), WAL_NREADER-1);
      if( rc==SQLITE_OK ){
................................................................................
    ** only - never from the wal file. This means that if a writer holding
    ** a lock on aReadmark[0] were to commit a transaction but not close the
    ** read-transaction, subsequent read operations would read directly from
    ** the database file - ignoring the new pages just appended
    ** to the wal file. */
    rc = walUpgradeReadlock(pWal);
  }

  return rc;
}

/*
** Information about the current state of the WAL file and where
** the next fsync should occur - passed from sqlite3WalFrames() into
** walWriteToLog().
................................................................................
  PgHdr *pPage,               /* The page of the frame to be written */
  int nTruncate,              /* The commit flag.  Usually 0.  >0 for commit */
  sqlite3_int64 iOffset       /* Byte offset at which to write */
){
  int rc;                         /* Result code from subfunctions */
  void *pData;                    /* Data actually written */
  u8 aFrame[WAL_FRAME_HDRSIZE];   /* Buffer to assemble frame-header in */

#if defined(SQLITE_TEST) && defined(SQLITE_DEBUG)
  { 
    int iWal = walidxGetFile(&p->pWal->hdr);
    int iFrame = 1 + (iOffset / (WAL_FRAME_HDRSIZE + p->pWal->szPage));
    assert( p->pWal->apWalFd[iWal]==p->pFd );
    WALTRACE(("WAL%p: page %d written to frame %d of wal %d\n",
          p->pWal, (int)pPage->pgno, iFrame, iWal
    ));
  }
#endif

#if defined(SQLITE_HAS_CODEC)
  if( (pData = sqlite3PagerCodec(pPage))==0 ) return SQLITE_NOMEM_BKPT;
#else
  pData = pPage->pData;
#endif
  walEncodeFrame(p->pWal, pPage->pgno, nTruncate, pData, aFrame);
  rc = walWriteToLog(p, aFrame, sizeof(aFrame), iOffset);
................................................................................
** one or more frames have been overwritten. It updates the checksums for
** all frames written to the wal file by the current transaction starting
** with the earliest to have been overwritten.
**
** SQLITE_OK is returned if successful, or an SQLite error code otherwise.
*/
static int walRewriteChecksums(Wal *pWal, u32 iLast){

  int rc = SQLITE_OK;             /* Return code */
  const int szPage = pWal->szPage;/* Database page size */
  u8 *aBuf;                       /* Buffer to load data from wal file into */
  u8 aFrame[WAL_FRAME_HDRSIZE];   /* Buffer to assemble frame-headers in */
  u32 iRead;                      /* Next frame to read from wal file */
  i64 iCksumOff;
  sqlite3_file *pWalFd = pWal->apWalFd[walidxGetFile(&pWal->hdr)];

  aBuf = sqlite3_malloc(szPage + WAL_FRAME_HDRSIZE);
  if( aBuf==0 ) return SQLITE_NOMEM_BKPT;

  /* Find the checksum values to use as input for the recalculating the
  ** first checksum. If the first frame is frame 1 (implying that the current
  ** transaction restarted the wal file), these values must be read from the
................................................................................
  ** previous frame.  */
  assert( pWal->iReCksum>0 );
  if( pWal->iReCksum==1 ){
    iCksumOff = 24;
  }else{
    iCksumOff = walFrameOffset(pWal->iReCksum-1, szPage) + 16;
  }
  rc = sqlite3OsRead(pWalFd, aBuf, sizeof(u32)*2, iCksumOff);
  pWal->hdr.aFrameCksum[0] = sqlite3Get4byte(aBuf);
  pWal->hdr.aFrameCksum[1] = sqlite3Get4byte(&aBuf[sizeof(u32)]);

  iRead = pWal->iReCksum;
  pWal->iReCksum = 0;
  for(; rc==SQLITE_OK && iRead<=iLast; iRead++){
    i64 iOff = walFrameOffset(iRead, szPage);
    rc = sqlite3OsRead(pWalFd, aBuf, szPage+WAL_FRAME_HDRSIZE, iOff);
    if( rc==SQLITE_OK ){
      u32 iPgno, nDbSize;
      iPgno = sqlite3Get4byte(aBuf);
      nDbSize = sqlite3Get4byte(&aBuf[4]);

      walEncodeFrame(pWal, iPgno, nDbSize, &aBuf[WAL_FRAME_HDRSIZE], aFrame);
      rc = sqlite3OsWrite(pWalFd, aFrame, sizeof(aFrame), iOff);
    }
  }

  sqlite3_free(aBuf);
  return rc;
}

................................................................................
  PgHdr *pLast = 0;               /* Last frame in list */
  int nExtra = 0;                 /* Number of extra copies of last page */
  int szFrame;                    /* The size of a single frame */
  i64 iOffset;                    /* Next byte to write in WAL file */
  WalWriter w;                    /* The writer */
  u32 iFirst = 0;                 /* First frame that may be overwritten */
  WalIndexHdr *pLive;             /* Pointer to shared header */
  int iApp;
  int bWal2 = isWalMode2(pWal);

  assert( pList );
  assert( pWal->writeLock );

  /* If this frame set completes a transaction, then nTruncate>0.  If
  ** nTruncate==0 then this frame set does not complete the transaction. */
  assert( (isCommit!=0)==(nTruncate!=0) );








  pLive = (WalIndexHdr*)walIndexHdr(pWal);
  if( memcmp(&pWal->hdr, (void *)pLive, sizeof(WalIndexHdr))!=0 ){

    /* if( isWalMode2(pWal)==0 ) */
    iFirst = walidxGetMxFrame(pLive, walidxGetFile(pLive))+1;
  }

  /* See if it is possible to write these frames into the start of the
  ** log file, instead of appending to it at pWal->hdr.mxFrame.
  */
  else if( SQLITE_OK!=(rc = walRestartLog(pWal)) ){
    return rc;
  }

  /* If this is the first frame written into the log, write the WAL
  ** header to the start of the WAL file. See comments at the top of
  ** this source file for a description of the WAL header format.
  */
  iApp = walidxGetFile(&pWal->hdr);
  iFrame = walidxGetMxFrame(&pWal->hdr, iApp);
  assert( iApp==0 || bWal2 );

#if defined(SQLITE_TEST) && defined(SQLITE_DEBUG)
  { int cnt; for(cnt=0, p=pList; p; p=p->pDirty, cnt++){}
    WALTRACE(("WAL%p: frame write begin. %d frames. iWal=%d. mxFrame=%d. %s\n",
              pWal, cnt, iApp, iFrame, isCommit ? "Commit" : "Spill"));
  }
#endif

  if( iFrame==0 ){
    u32 iCkpt = 0;
    u8 aWalHdr[WAL_HDRSIZE];      /* Buffer to assemble wal-header in */
    u32 aCksum[2];                /* Checksum for wal-header */

    sqlite3Put4byte(&aWalHdr[0], (WAL_MAGIC | SQLITE_BIGENDIAN));
    sqlite3Put4byte(&aWalHdr[4], pWal->hdr.iVersion);
    sqlite3Put4byte(&aWalHdr[8], szPage);
    if( bWal2 ){
      if( walidxGetMxFrame(&pWal->hdr, !iApp)>0 ){
        u8 aPrev[4];
        rc = sqlite3OsRead(pWal->apWalFd[!iApp], aPrev, 4, 12);
        if( rc!=SQLITE_OK ){
          return rc;
        }
        iCkpt = (sqlite3Get4byte(aPrev) + 1) & 0x0F;
      }
    }else{
      iCkpt = pWal->nCkpt;
    }
    sqlite3Put4byte(&aWalHdr[12], iCkpt);

    memcpy(&aWalHdr[16], pWal->hdr.aSalt, 8);
    walChecksumBytes(1, aWalHdr, WAL_HDRSIZE-2*4, 0, aCksum);
    sqlite3Put4byte(&aWalHdr[24], aCksum[0]);
    sqlite3Put4byte(&aWalHdr[28], aCksum[1]);

    pWal->szPage = szPage;
    pWal->hdr.bigEndCksum = SQLITE_BIGENDIAN;
    pWal->hdr.aFrameCksum[0] = aCksum[0];
    pWal->hdr.aFrameCksum[1] = aCksum[1];
    pWal->truncateOnCommit = 1;

    rc = sqlite3OsWrite(pWal->apWalFd[iApp], aWalHdr, sizeof(aWalHdr), 0);
    WALTRACE(("WAL%p: wal-header write %s\n", pWal, rc ? "failed" : "ok"));
    if( rc!=SQLITE_OK ){
      return rc;
    }

    /* Sync the header (unless SQLITE_IOCAP_SEQUENTIAL is true or unless
    ** all syncing is turned off by PRAGMA synchronous=OFF).  Otherwise
    ** an out-of-order write following a WAL restart could result in
    ** database corruption.  See the ticket:
    **
    **     https://sqlite.org/src/info/ff5be73dee
    */
    if( pWal->syncHeader ){
      rc = sqlite3OsSync(pWal->apWalFd[iApp], CKPT_SYNC_FLAGS(sync_flags));
      if( rc ) return rc;
    }
  }
  assert( (int)pWal->szPage==szPage );

  /* Setup information needed to write frames into the WAL */
  w.pWal = pWal;
  w.pFd = pWal->apWalFd[iApp];
  w.iSyncPoint = 0;
  w.syncFlags = sync_flags;
  w.szPage = szPage;
  iOffset = walFrameOffset(iFrame+1, szPage);
  szFrame = szPage + WAL_FRAME_HDRSIZE;

  /* Write all frames into the log file exactly once */
................................................................................

    /* Check if this page has already been written into the wal file by
    ** the current transaction. If so, overwrite the existing frame and
    ** set Wal.writeLock to WAL_WRITELOCK_RECKSUM - indicating that 
    ** checksums must be recomputed when the transaction is committed.  */
    if( iFirst && (p->pDirty || isCommit==0) ){
      u32 iWrite = 0;
      VVA_ONLY(rc =) walSearchWal(pWal, iApp, p->pgno, &iWrite);
      assert( rc==SQLITE_OK || iWrite==0 );
      if( iWrite && bWal2 ){
        walExternalDecode(iWrite, &iWrite);
      }
      if( iWrite>=iFirst ){
        i64 iOff = walFrameOffset(iWrite, szPage) + WAL_FRAME_HDRSIZE;
        void *pData;
        if( pWal->iReCksum==0 || iWrite<pWal->iReCksum ){
          pWal->iReCksum = iWrite;
        }
#if defined(SQLITE_HAS_CODEC)
        if( (pData = sqlite3PagerCodec(p))==0 ) return SQLITE_NOMEM;
#else
        pData = p->pData;
#endif
        rc = sqlite3OsWrite(pWal->apWalFd[iApp], pData, szPage, iOff);
        if( rc ) return rc;
        p->flags &= ~PGHDR_WAL_APPEND;
        continue;
      }
    }

    iFrame++;
................................................................................
  ** boundary is crossed.  Only the part of the WAL prior to the last
  ** sector boundary is synced; the part of the last frame that extends
  ** past the sector boundary is written after the sync.
  */
  if( isCommit && WAL_SYNC_FLAGS(sync_flags)!=0 ){
    int bSync = 1;
    if( pWal->padToSectorBoundary ){
      int sectorSize = sqlite3SectorSize(w.pFd);
      w.iSyncPoint = ((iOffset+sectorSize-1)/sectorSize)*sectorSize;
      bSync = (w.iSyncPoint==iOffset);
      testcase( bSync );
      while( iOffset<w.iSyncPoint ){
        rc = walWriteOneFrame(&w, pLast, nTruncate, iOffset);
        if( rc ) return rc;
        iOffset += szFrame;
................................................................................
  }

  /* Append data to the wal-index. It is not necessary to lock the 
  ** wal-index to do this as the SQLITE_SHM_WRITE lock held on the wal-index
  ** guarantees that there are no other writers, and no data that may
  ** be in use by existing readers is being overwritten.
  */
  iFrame = walidxGetMxFrame(&pWal->hdr, iApp);
  for(p=pList; p && rc==SQLITE_OK; p=p->pDirty){
    if( (p->flags & PGHDR_WAL_APPEND)==0 ) continue;
    iFrame++;
    rc = walIndexAppend(pWal, iApp, iFrame, p->pgno);
  }
  while( rc==SQLITE_OK && nExtra>0 ){
    iFrame++;
    nExtra--;
    rc = walIndexAppend(pWal, iApp, iFrame, pLast->pgno);
  }

  if( rc==SQLITE_OK ){
    /* Update the private copy of the header. */
    pWal->hdr.szPage = (u16)((szPage&0xff00) | (szPage>>16));
    testcase( szPage<=32768 );
    testcase( szPage>=65536 );
    walidxSetMxFrame(&pWal->hdr, iApp, iFrame);
    if( isCommit ){
      pWal->hdr.iChange++;
      pWal->hdr.nPage = nTruncate;
    }
    /* If this is a commit, update the wal-index header too. */
    if( isCommit ){
      walIndexWriteHdr(pWal);
      if( bWal2 ){
        int iOther = !walidxGetFile(&pWal->hdr);
        if( walidxGetMxFrame(&pWal->hdr, iOther) 
            && !walCkptInfo(pWal)->nBackfill 
        ){
          pWal->iCallback = walidxGetMxFrame(&pWal->hdr, 0);
          pWal->iCallback += walidxGetMxFrame(&pWal->hdr, 1);
        }
      }else{
        pWal->iCallback = iFrame;
      }
    }
  }

  WALTRACE(("WAL%p: frame write %s\n", pWal, rc ? "failed" : "ok"));
  return rc;
}

................................................................................
    if( isChanged && pWal->pDbFd->pMethods->iVersion>=3 ){
      sqlite3OsUnfetch(pWal->pDbFd, 0, 0);
    }
  }

  /* Copy data from the log to the database file. */
  if( rc==SQLITE_OK ){
    if( (walPagesize(pWal)!=nBuf) 
     && (walidxGetMxFrame(&pWal->hdr, 0) || walidxGetMxFrame(&pWal->hdr, 1))
    ){
      rc = SQLITE_CORRUPT_BKPT;
    }else{
      rc = walCheckpoint(pWal, db, eMode2, xBusy2, pBusyArg, sync_flags, zBuf);
    }

    /* If no error occurred, set the output variables. */
    if( rc==SQLITE_OK || rc==SQLITE_BUSY ){
      if( pnLog ){
        *pnLog = walidxGetMxFrame(&pWal->hdr,0)+walidxGetMxFrame(&pWal->hdr,1);
      }
      if( pnCkpt ){
        if( isWalMode2(pWal) ){
          if( (int)(walCkptInfo(pWal)->nBackfill) ){
            *pnCkpt = walidxGetMxFrame(&pWal->hdr, !walidxGetFile(&pWal->hdr));
          }else{
            *pnCkpt = 0;
          }
        }else{
          *pnCkpt = walCkptInfo(pWal)->nBackfill;
        }
      }
    }
  }

  if( isChanged ){
    /* If a new wal-index header was loaded before the checkpoint was 
    ** performed, then the pager-cache associated with pWal is now
    ** out of date. So zero the cached wal-index header to ensure that
................................................................................
** If op is negative, then do a dry-run of the op==1 case but do
** not actually change anything. The pager uses this to see if it
** should acquire the database exclusive lock prior to invoking
** the op==1 case.
*/
int sqlite3WalExclusiveMode(Wal *pWal, int op){
  int rc;

  assert( pWal->writeLock==0 );
  assert( pWal->exclusiveMode!=WAL_HEAPMEMORY_MODE || op==-1 );

  /* pWal->readLock is usually set, but might be -1 if there was a 
  ** prior error while attempting to acquire are read-lock. This cannot 
  ** happen if the connection is actually in exclusive mode (as no xShmLock
  ** locks are taken in this case). Nor should the pager attempt to
  ** upgrade to exclusive-mode following such an error.
  */
  assert( pWal->readLock!=WAL_LOCK_NONE || pWal->lockError );
  assert( pWal->readLock!=WAL_LOCK_NONE || (op<=0 && pWal->exclusiveMode==0) );

  if( op==0 ){
    if( pWal->exclusiveMode ){
      pWal->exclusiveMode = WAL_NORMAL_MODE;
      if( isWalMode2(pWal) ){
        rc = walLockReader(pWal, pWal->readLock, 1);
      }else{
        rc = walLockShared(pWal, WAL_READ_LOCK(pWal->readLock));
      }
      if( rc!=SQLITE_OK ){
        pWal->exclusiveMode = WAL_EXCLUSIVE_MODE;
      }
      rc = pWal->exclusiveMode==WAL_NORMAL_MODE;
    }else{
      /* Already in locking_mode=NORMAL */
      rc = 0;
    }
  }else if( op>0 ){
    assert( pWal->exclusiveMode==WAL_NORMAL_MODE );
    assert( pWal->readLock>=0 );
    if( isWalMode2(pWal) ){
      walLockReader(pWal, pWal->readLock, 0);
    }else{
      walUnlockShared(pWal, WAL_READ_LOCK(pWal->readLock));
    }
    pWal->exclusiveMode = WAL_EXCLUSIVE_MODE;
    rc = 1;
  }else{
    rc = pWal->exclusiveMode==WAL_NORMAL_MODE;
  }
  return rc;
}
................................................................................
  return (pWal ? pWal->szPage : 0);
}
#endif

/* Return the sqlite3_file object for the WAL file
*/
sqlite3_file *sqlite3WalFile(Wal *pWal){
  return pWal->apWalFd[0];
}

/* 
** Return the values required by sqlite3_wal_info().
*/
int sqlite3WalInfo(Wal *pWal, u32 *pnPrior, u32 *pnFrame){
  int rc = SQLITE_OK;

/* Macros for extracting appropriate sync flags for either transaction
** commits (WAL_SYNC_FLAGS(X)) or for checkpoint ops (CKPT_SYNC_FLAGS(X)):
*/
#define WAL_SYNC_FLAGS(X)   ((X)&0x03)
#define CKPT_SYNC_FLAGS(X)  (((X)>>2)&0x03)

#ifdef SQLITE_OMIT_WAL
# define sqlite3WalOpen(x,y,z)                   0
# define sqlite3WalLimit(x,y)
# define sqlite3WalClose(v,w,x,y,z)              0
# define sqlite3WalBeginReadTransaction(y,z)     0
# define sqlite3WalEndReadTransaction(z)
# define sqlite3WalDbsize(y)                     0
# define sqlite3WalBeginWriteTransaction(y)      0
# define sqlite3WalEndWriteTransaction(x)        0
................................................................................

/* Connection to a write-ahead log (WAL) file. 
** There is one object of this type for each pager. 
*/
typedef struct Wal Wal;

/* Open and close a connection to a write-ahead log. */
int sqlite3WalOpen(sqlite3_vfs*, sqlite3_file*, const char *, int, i64, Wal**);
int sqlite3WalClose(Wal *pWal, sqlite3*, int sync_flags, int, u8 *);

/* Set the limiting size of a WAL file. */
void sqlite3WalLimit(Wal*, i64);

/* Used by readers to open (lock) and close (unlock) a snapshot.  A 
** snapshot is like a read-transaction.  It is the state of the database

/* Macros for extracting appropriate sync flags for either transaction
** commits (WAL_SYNC_FLAGS(X)) or for checkpoint ops (CKPT_SYNC_FLAGS(X)):
*/
#define WAL_SYNC_FLAGS(X)   ((X)&0x03)
#define CKPT_SYNC_FLAGS(X)  (((X)>>2)&0x03)

#ifdef SQLITE_OMIT_WAL
# define sqlite3WalOpen(w,x,y,z)                 0
# define sqlite3WalLimit(x,y)
# define sqlite3WalClose(v,w,x,y,z)              0
# define sqlite3WalBeginReadTransaction(y,z)     0
# define sqlite3WalEndReadTransaction(z)
# define sqlite3WalDbsize(y)                     0
# define sqlite3WalBeginWriteTransaction(y)      0
# define sqlite3WalEndWriteTransaction(x)        0
................................................................................

/* Connection to a write-ahead log (WAL) file. 
** There is one object of this type for each pager. 
*/
typedef struct Wal Wal;

/* Open and close a connection to a write-ahead log. */
int sqlite3WalOpen(sqlite3_vfs*, sqlite3_file*, const char *,int,i64,int,Wal**);
int sqlite3WalClose(Wal *pWal, sqlite3*, int sync_flags, int, u8 *);

/* Set the limiting size of a WAL file. */
void sqlite3WalLimit(Wal*, i64);

/* Used by readers to open (lock) and close (unlock) a snapshot.  A 
** snapshot is like a read-transaction.  It is the state of the database

# Corrupt the file header in various ways and make sure the corruption
# is detected when opening the database file.
#
db close
forcecopy test.db test.db-template

set unreadable_version 02
ifcapable wal { set unreadable_version 03 }
do_test corruptA-2.1 {
  forcecopy test.db-template test.db
  hexio_write test.db 19 $unreadable_version   ;# the read format number
  sqlite3 db test.db
  catchsql {SELECT * FROM t1}  
} {1 {file is not a database}}
 

# Corrupt the file header in various ways and make sure the corruption
# is detected when opening the database file.
#
db close
forcecopy test.db test.db-template

set unreadable_version 02
ifcapable wal { set unreadable_version 04 }
do_test corruptA-2.1 {
  forcecopy test.db-template test.db
  hexio_write test.db 19 $unreadable_version   ;# the read format number
  sqlite3 db test.db
  catchsql {SELECT * FROM t1}  
} {1 {file is not a database}}
 

    insert.test   insert2.test  insert3.test rollback.test 
    select1.test  select2.test  select3.test
  }
}

test_suite "wal" -description {
  Run tests with journal_mode=WAL

















} -initialize {
  set ::G(savepoint6_iterations) 100
} -shutdown {
  unset -nocomplain ::G(savepoint6_iterations)
} -files {
  savepoint.test     savepoint2.test     savepoint6.test
  trans.test         avtrans.test

    insert.test   insert2.test  insert3.test rollback.test 
    select1.test  select2.test  select3.test
  }
}

test_suite "wal" -description {
  Run tests with journal_mode=WAL
} -initialize {
  set ::G(savepoint6_iterations) 100
} -shutdown {
  unset -nocomplain ::G(savepoint6_iterations)
} -files {
  savepoint.test     savepoint2.test     savepoint6.test
  trans.test         avtrans.test

  fts3aa.test  fts3ab.test  fts3ac.test  fts3ad.test
  fts3ae.test  fts3af.test  fts3ag.test  fts3ah.test
  fts3ai.test  fts3aj.test  fts3ak.test  fts3al.test
  fts3am.test  fts3an.test  fts3ao.test  fts3b.test
  fts3c.test   fts3d.test   fts3e.test   fts3query.test 
}

test_suite "wal2" -description {
  Run tests with journal_mode=WAL2
} -initialize {
  set ::G(savepoint6_iterations) 100
} -shutdown {
  unset -nocomplain ::G(savepoint6_iterations)
} -files {
  savepoint.test     savepoint2.test     savepoint6.test
  trans.test         avtrans.test

# returns 1 if the database N of connection D is read-only, 0 if it is
# read/write, or -1 if N is not the name of a database on connection D.
#
do_test rdonly-1.1.1 {
  sqlite3_db_readonly db main
} {0}

# Changes the write version from 1 to 3.  Verify that the database
# can be read but not written.
#
do_test rdonly-1.2 {
  db close
  hexio_get_int [hexio_read test.db 18 1]
} 1
do_test rdonly-1.3 {
  hexio_write test.db 18 03
  sqlite3 db test.db
  execsql {
    SELECT * FROM t1;
  }
} {1}
do_test rdonly-1.3.1 {
  sqlite3_db_readonly db main
................................................................................

# Now, after connection [db] has loaded the database schema, modify the
# write-version of the file (and the change-counter, so that the 
# write-version is reloaded). This way, SQLite does not discover that
# the database is read-only until after it is locked.
#
set ro_version 02
ifcapable wal { set ro_version 03 }
do_test rdonly-1.6 {
  hexio_write test.db 18 $ro_version     ; # write-version
  hexio_write test.db 24 11223344        ; # change-counter
  catchsql {
    INSERT INTO t1 VALUES(2);
  }
} {1 {attempt to write a readonly database}}

finish_test

# returns 1 if the database N of connection D is read-only, 0 if it is
# read/write, or -1 if N is not the name of a database on connection D.
#
do_test rdonly-1.1.1 {
  sqlite3_db_readonly db main
} {0}

# Changes the write version from 1 to 4.  Verify that the database
# can be read but not written.
#
do_test rdonly-1.2 {
  db close
  hexio_get_int [hexio_read test.db 18 1]
} 1
do_test rdonly-1.3 {
  hexio_write test.db 18 04
  sqlite3 db test.db
  execsql {
    SELECT * FROM t1;
  }
} {1}
do_test rdonly-1.3.1 {
  sqlite3_db_readonly db main
................................................................................

# Now, after connection [db] has loaded the database schema, modify the
# write-version of the file (and the change-counter, so that the 
# write-version is reloaded). This way, SQLite does not discover that
# the database is read-only until after it is locked.
#
set ro_version 02
ifcapable wal { set ro_version 04 }
do_test rdonly-1.6 {
  hexio_write test.db 18 $ro_version     ; # write-version
  hexio_write test.db 24 11223344        ; # change-counter
  catchsql {
    INSERT INTO t1 VALUES(2);
  }
} {1 {attempt to write a readonly database}}

finish_test

do_test savepoint-1.1 {
  wal_set_journal_mode
  execsql {
    SAVEPOINT sp1;
    RELEASE sp1;
  }
} {}

do_test savepoint-1.2 {
  execsql {
    SAVEPOINT sp1;
    ROLLBACK TO sp1;
  }
} {}
do_test savepoint-1.3 {

do_test savepoint-1.1 {
  wal_set_journal_mode
  execsql {
    SAVEPOINT sp1;
    RELEASE sp1;
  }
} {}
wal_check_journal_mode savepoint-1.1
do_test savepoint-1.2 {
  execsql {
    SAVEPOINT sp1;
    ROLLBACK TO sp1;
  }
} {}
do_test savepoint-1.3 {

#
# $Id: savepoint6.test,v 1.4 2009/06/05 17:09:12 drh Exp $

set testdir [file dirname $argv0]
source $testdir/tester.tcl

proc sql {zSql} {




  uplevel db eval [list $zSql]
  #puts stderr "$zSql ;"
}

set DATABASE_SCHEMA {
    PRAGMA auto_vacuum = incremental;
    CREATE TABLE t1(x, y);
................................................................................
#   rollback  NAME
#   release   NAME
#
#   insert_rows XVALUES
#   delete_rows XVALUES
#
proc savepoint {zName} {

  catch { sql "SAVEPOINT $zName" }
  lappend ::lSavepoint [list $zName [array get ::aEntry]]
}

proc rollback {zName} {

  catch { sql "ROLLBACK TO $zName" }
  for {set i [expr {[llength $::lSavepoint]-1}]} {$i>=0} {incr i -1} {
    set zSavepoint [lindex $::lSavepoint $i 0]
    if {$zSavepoint eq $zName} {
      unset -nocomplain ::aEntry
      array set ::aEntry [lindex $::lSavepoint $i 1]

................................................................................
      }
      break
    }
  }
}

proc release {zName} {

  catch { sql "RELEASE $zName" }
  for {set i [expr {[llength $::lSavepoint]-1}]} {$i>=0} {incr i -1} {
    set zSavepoint [lindex $::lSavepoint $i 0]
    if {$zSavepoint eq $zName} {
      set ::lSavepoint [lreplace $::lSavepoint $i end]
      break
    }
................................................................................

  if {[llength $::lSavepoint] == 0} {
    #puts stderr "-- End of transaction!!!!!!!!!!!!!"
  }
}

proc insert_rows {lX} {

  foreach x $lX {
    set y [x_to_y $x]

    # Update database [db]
    sql "INSERT OR REPLACE INTO t1 VALUES($x, '$y')"

    # Update the Tcl database.
    set ::aEntry($x) $y
  }
}

proc delete_rows {lX} {

  foreach x $lX {
    # Update database [db]
    sql "DELETE FROM t1 WHERE x = $x"

    # Update the Tcl database.
    unset -nocomplain ::aEntry($x)
  }
................................................................................
  set ret [list]
  for {set i 0} {$i<$nRes} {incr i} {
    lappend ret [expr int(rand()*$nRange)]
  }
  return $ret
} 
#-------------------------------------------------------------------------






proc database_op {} {
  set i [expr int(rand()*2)] 
  if {$i==0} {
    insert_rows [random_integers 100 1000]
  }
  if {$i==1} {
................................................................................
proc savepoint_op {} {
  set names {one two three four five}
  set cmds  {savepoint savepoint savepoint savepoint release rollback}

  set C [lindex $cmds [expr int(rand()*6)]]
  set N [lindex $names [expr int(rand()*5)]]

  #puts stderr "   $C $N ;  "
  #flush stderr

  $C $N
  return ok
}

expr srand(0)

############################################################################

#
# $Id: savepoint6.test,v 1.4 2009/06/05 17:09:12 drh Exp $

set testdir [file dirname $argv0]
source $testdir/tester.tcl

proc sql {zSql} {
  if {0 && $::debug_op} {
    puts stderr "$zSql ;"
    flush stderr
  }
  uplevel db eval [list $zSql]
  #puts stderr "$zSql ;"
}

set DATABASE_SCHEMA {
    PRAGMA auto_vacuum = incremental;
    CREATE TABLE t1(x, y);
................................................................................
#   rollback  NAME
#   release   NAME
#
#   insert_rows XVALUES
#   delete_rows XVALUES
#
proc savepoint {zName} {
  if {$::debug_op} { puts stderr "savepoint $zName" ; flush stderr }
  catch { sql "SAVEPOINT $zName" }
  lappend ::lSavepoint [list $zName [array get ::aEntry]]
}

proc rollback {zName} {
  if {$::debug_op} { puts stderr "rollback $zName" ; flush stderr }
  catch { sql "ROLLBACK TO $zName" }
  for {set i [expr {[llength $::lSavepoint]-1}]} {$i>=0} {incr i -1} {
    set zSavepoint [lindex $::lSavepoint $i 0]
    if {$zSavepoint eq $zName} {
      unset -nocomplain ::aEntry
      array set ::aEntry [lindex $::lSavepoint $i 1]

................................................................................
      }
      break
    }
  }
}

proc release {zName} {
  if {$::debug_op} { puts stderr "release $zName" ; flush stderr }
  catch { sql "RELEASE $zName" }
  for {set i [expr {[llength $::lSavepoint]-1}]} {$i>=0} {incr i -1} {
    set zSavepoint [lindex $::lSavepoint $i 0]
    if {$zSavepoint eq $zName} {
      set ::lSavepoint [lreplace $::lSavepoint $i end]
      break
    }
................................................................................

  if {[llength $::lSavepoint] == 0} {
    #puts stderr "-- End of transaction!!!!!!!!!!!!!"
  }
}

proc insert_rows {lX} {
  if {$::debug_op} { puts stderr "insert_rows $lX" ; flush stderr }
  foreach x $lX {
    set y [x_to_y $x]

    # Update database [db]
    sql "INSERT OR REPLACE INTO t1 VALUES($x, '$y')"

    # Update the Tcl database.
    set ::aEntry($x) $y
  }
}

proc delete_rows {lX} {
  if {$::debug_op} { puts stderr "delete_rows $lX" ; flush stderr }
  foreach x $lX {
    # Update database [db]
    sql "DELETE FROM t1 WHERE x = $x"

    # Update the Tcl database.
    unset -nocomplain ::aEntry($x)
  }
................................................................................
  set ret [list]
  for {set i 0} {$i<$nRes} {incr i} {
    lappend ret [expr int(rand()*$nRange)]
  }
  return $ret
} 
#-------------------------------------------------------------------------

set ::debug_op 0
proc debug_ops {} {
  set ::debug_op 1
}

proc database_op {} {
  set i [expr int(rand()*2)] 
  if {$i==0} {
    insert_rows [random_integers 100 1000]
  }
  if {$i==1} {
................................................................................
proc savepoint_op {} {
  set names {one two three four five}
  set cmds  {savepoint savepoint savepoint savepoint release rollback}

  set C [lindex $cmds [expr int(rand()*6)]]
  set N [lindex $names [expr int(rand()*5)]]




  $C $N
  return ok
}

expr srand(0)

############################################################################

# Create a test database
#
proc reset_db {} {
  catch {db close}
  forcedelete test.db
  forcedelete test.db-journal
  forcedelete test.db-wal

  sqlite3 db ./test.db
  set ::DB [sqlite3_connection_pointer db]
  if {[info exists ::SETUP_SQL]} {
    db eval $::SETUP_SQL
  }
}
reset_db
................................................................................
#     Otherwise (if not running a WAL permutation) this is a no-op.
#
#   wal_is_wal_mode
#
#     Returns true if this test should be run in WAL mode. False otherwise.
#
proc wal_is_wal_mode {} {
  expr {[permutation] eq "wal"}


}
proc wal_set_journal_mode {{db db}} {
  if { [wal_is_wal_mode] } {




    $db eval "PRAGMA journal_mode = WAL"





  }
}
proc wal_check_journal_mode {testname {db db}} {
  if { [wal_is_wal_mode] } {
    $db eval { SELECT * FROM sqlite_master }




    do_test $testname [list $db eval "PRAGMA main.journal_mode"] {wal}
  }
}

proc wal_is_capable {} {
  ifcapable !wal { return 0 }
  if {[permutation]=="journaltest"} { return 0 }
  return 1

# Create a test database
#
proc reset_db {} {
  catch {db close}
  forcedelete test.db
  forcedelete test.db-journal
  forcedelete test.db-wal
  forcedelete test.db-wal2
  sqlite3 db ./test.db
  set ::DB [sqlite3_connection_pointer db]
  if {[info exists ::SETUP_SQL]} {
    db eval $::SETUP_SQL
  }
}
reset_db
................................................................................
#     Otherwise (if not running a WAL permutation) this is a no-op.
#
#   wal_is_wal_mode
#
#     Returns true if this test should be run in WAL mode. False otherwise.
#
proc wal_is_wal_mode {} {
  if {[permutation] eq "wal"} { return 1 }
  if {[permutation] eq "wal2"} { return 2 }
  return 0
}
proc wal_set_journal_mode {{db db}} {
  switch -- [wal_is_wal_mode] {
    0 {
    }

    1 {
      $db eval "PRAGMA journal_mode = WAL"
    }

    2 {
      $db eval "PRAGMA journal_mode = WAL2"
    }
  }
}
proc wal_check_journal_mode {testname {db db}} {
  if { [wal_is_wal_mode] } {
    $db eval { SELECT * FROM sqlite_master }
    set expected "wal"
    if {[wal_is_wal_mode]==2} {
      set expected "wal2"
    }
    do_test $testname [list $db eval "PRAGMA main.journal_mode"] $expected
  }
}

proc wal_is_capable {} {
  ifcapable !wal { return 0 }
  if {[permutation]=="journaltest"} { return 0 }
  return 1

      CREATE TABLE aux.t2(a, b);
      PRAGMA main.journal_mode = WAL;
      PRAGMA aux.journal_mode = WAL;
      INSERT INTO t1 VALUES('x', 'y');
      INSERT INTO t2 VALUES('x', 'y');
    }
    lsort [array names ::T1]
  } {test.db1 test.db1-journal test.db1-wal}
  
  do_test 5.1.2 {
    lsort [array names ::T2]
  } {test.db2 test.db2-journal test.db2-wal}
  db close
  
  tvfs1 delete
  tvfs2 delete
}

#-------------------------------------------------------------------------

      CREATE TABLE aux.t2(a, b);
      PRAGMA main.journal_mode = WAL;
      PRAGMA aux.journal_mode = WAL;
      INSERT INTO t1 VALUES('x', 'y');
      INSERT INTO t2 VALUES('x', 'y');
    }
    lsort [array names ::T1]
  } {test.db1 test.db1-journal test.db1-wal test.db1-wal2}
  
  do_test 5.1.2 {
    lsort [array names ::T2]
  } {test.db2 test.db2-journal test.db2-wal test.db2-wal2}
  db close
  
  tvfs1 delete
  tvfs2 delete
}

#-------------------------------------------------------------------------

# 2017 September 19
#
# The author disclaims copyright to this source code.  In place of
# a legal notice, here is a blessing:
#
#    May you do good and not evil.
#    May you find forgiveness for yourself and forgive others.
#    May you share freely, never taking more than you give.
#
#***********************************************************************
# This file implements regression tests for SQLite library.  The
# focus of this file is testing the operation of the library in
# "PRAGMA journal_mode=WAL2" mode.
#

set testdir [file dirname $argv0]
source $testdir/tester.tcl
source $testdir/lock_common.tcl
source $testdir/malloc_common.tcl
source $testdir/wal_common.tcl

set testprefix wal2rewrite
ifcapable !wal {finish_test ; return }

proc filesize {filename} {
  if {[file exists $filename]} {
    return [file size $filename]
  }
  return 0
}

foreach {tn jrnlmode} {
  1 wal
  2 wal2
} {
  reset_db
  execsql "PRAGMA journal_mode = $jrnlmode"
  do_execsql_test $tn.1 {
    PRAGMA journal_size_limit = 10000;
    PRAGMA cache_size = 5;
    PRAGMA wal_autocheckpoint = 10;
  
    CREATE TABLE t1(a INTEGER PRIMARY KEY, b INTEGER, c BLOB);
    CREATE INDEX t1b ON t1(b);
    CREATE INDEX t1c ON t1(c);
  
    WITH s(i) AS (
      SELECT 1 UNION SELECT i+1 FROM s WHERE i<10
    )
    INSERT INTO t1 SELECT i, i, randomblob(800) FROM s;
  } {10000 10}
  
  for {set i 0} {$i < 4} {incr i} {
    do_execsql_test $tn.$i.1 {
      UPDATE t1 SET c=randomblob(800) WHERE (b%10)==5 AND ($i%2)
    }
    do_execsql_test $tn.$i.2 {
      BEGIN;
      UPDATE t1 SET b=b+10, c=randomblob(800);
      UPDATE t1 SET b=b+10, c=randomblob(800);
      UPDATE t1 SET b=b+10, c=randomblob(800);
      UPDATE t1 SET b=b+10, c=randomblob(800);
      UPDATE t1 SET b=b+10, c=randomblob(800);
      UPDATE t1 SET b=b+10, c=randomblob(800);
      UPDATE t1 SET b=b+10, c=randomblob(800);
      UPDATE t1 SET b=b+10, c=randomblob(800);
      UPDATE t1 SET b=b+10, c=randomblob(800);
      UPDATE t1 SET b=b+10, c=randomblob(800);
    }
    execsql COMMIT

    do_test $tn.$i.3 { expr [filesize test.db-wal]  < 100000 } 1
    do_test $tn.$i.4 { expr [filesize test.db-wal2] < 100000 } 1

    set sum [db eval {SELECT sum(b), md5sum(c) FROM t1}]

    do_test $tn.$i.5 {
      foreach f [glob -nocomplain test.db2*] {forcedelete $f}
      foreach f [glob -nocomplain test.db*] {
        forcecopy $f [string map {test.db test.db2} $f]
      }

      sqlite3 db2 test.db2
      db2 eval {SELECT sum(b), md5sum(c) FROM t1}
    } $sum
    db2 close
  }
}
    


finish_test

# 2017 September 19
#
# The author disclaims copyright to this source code.  In place of
# a legal notice, here is a blessing:
#
#    May you do good and not evil.
#    May you find forgiveness for yourself and forgive others.
#    May you share freely, never taking more than you give.
#
#***********************************************************************
# This file implements regression tests for SQLite library.  The
# focus of this file is testing the operation of the library in
# "PRAGMA journal_mode=WAL2" mode.
#

set testdir [file dirname $argv0]
source $testdir/tester.tcl
source $testdir/lock_common.tcl
source $testdir/malloc_common.tcl
source $testdir/wal_common.tcl

set testprefix wal2simple
ifcapable !wal {finish_test ; return }

#-------------------------------------------------------------------------
# The following tests verify that a client can switch in and out of wal
# and wal2 mode. But that it is not possible to change directly from wal
# to wal2, or from wal2 to wal mode.
#
do_execsql_test 1.1.0 {
  PRAGMA journal_mode = wal2
} {wal2}
execsql { SELECT * FROM sqlite_master} 
do_execsql_test 1.x {
  PRAGMA journal_mode;
  PRAGMA main.journal_mode;
} {wal2 wal2}
db close
do_test 1.1.1 { file size test.db } {1024}
do_test 1.1.2 { hexio_read test.db 18 2 } 0303

sqlite3 db test.db
do_execsql_test 1.2.0 {
  SELECT * FROM sqlite_master;
  PRAGMA journal_mode = delete;
} {delete}
db close
do_test 1.2.1 { file size test.db } {1024}
do_test 1.2.2 { hexio_read test.db 18 2 } 0101

sqlite3 db test.db
do_execsql_test 1.3.0 {
  SELECT * FROM sqlite_master;
  PRAGMA journal_mode = wal;
} {wal}
db close
do_test 1.3.1 { file size test.db } {1024}
do_test 1.3.2 { hexio_read test.db 18 2 } 0202

sqlite3 db test.db
do_catchsql_test 1.4.0 {
  PRAGMA journal_mode = wal2;
} {1 {cannot change from wal to wal2 mode}}
do_execsql_test 1.4.1 {
  PRAGMA journal_mode = wal;
  PRAGMA journal_mode = delete;
  PRAGMA journal_mode = wal2;
  PRAGMA journal_mode = wal2;
} {wal delete wal2 wal2}
do_catchsql_test 1.4.2 {
  PRAGMA journal_mode = wal;
} {1 {cannot change from wal2 to wal mode}}
db close
do_test 1.4.3 { hexio_read test.db 18 2 } 0303

#-------------------------------------------------------------------------
# Test that recovery in wal2 mode works.
#
forcedelete test.db test.db-wal test.db-wal2
reset_db
do_execsql_test 2.0 {
  CREATE TABLE t1(a INTEGER PRIMARY KEY, b);
  PRAGMA journal_mode = wal2;
  PRAGMA journal_size_limit = 5000;
} {wal2 5000}

proc wal_hook {DB nm nFrame} { $DB eval { PRAGMA wal_checkpoint } }
db wal_hook {wal_hook db}

for {set i 1} {$i <= 200} {incr i} {
  execsql { INSERT INTO t1 VALUES(NULL, randomblob(100)) }
  set res [db eval { SELECT sum(a), md5sum(b) FROM t1 }]

  do_test 2.1.$i {
    foreach f [glob -nocomplain test.db2*] { forcedelete $f }
    forcecopy test.db      test.db2
    forcecopy test.db-wal  test.db2-wal
    forcecopy test.db-wal2 test.db2-wal2

    sqlite3 db2 test.db2
    db2 eval { SELECT sum(a), md5sum(b) FROM t1 }
  } $res

  db2 close
}

#-------------------------------------------------------------------------

reset_db
do_execsql_test 3.0 {
  CREATE TABLE t1(x BLOB, y INTEGER PRIMARY KEY);
  CREATE INDEX i1 ON t1(x);
  PRAGMA cache_size = 5;
  PRAGMA journal_mode = wal2;
} {wal2}

breakpoint
do_test 3.1 {
  execsql BEGIN
  for {set i 1} {$i < 1000} {incr i} {
    execsql { INSERT INTO t1 VALUES(randomblob(800), $i) }
  }
  execsql COMMIT
} {}

do_execsql_test 3.2 {
  PRAGMA integrity_check;
} {ok}

#-------------------------------------------------------------------------
catch { db close }
foreach f [glob -nocomplain test.db*] { forcedelete $f }
reset_db
do_execsql_test 4.0 {
  CREATE TABLE t1(x, y);
  PRAGMA journal_mode = wal2;
} {wal2}

do_execsql_test 4.1 {
  SELECT * FROM t1;
} {}

do_execsql_test 4.2 {
  INSERT INTO t1 VALUES(1, 2);
} {}

do_execsql_test 4.3 {
  SELECT * FROM t1;
} {1 2}

do_test 4.4 {
  sqlite3 db2 test.db
  execsql { SELECT * FROM t1 } db2
} {1 2}

do_test 4.5 {
  lsort [glob test.db*]
} {test.db test.db-shm test.db-wal test.db-wal2}

do_test 4.6 {
  db close
  db2 close
  sqlite3 db test.db
  execsql { SELECT * FROM t1 }
} {1 2}

do_execsql_test 4.7 {
  PRAGMA journal_size_limit = 4000;
  INSERT INTO t1 VALUES(3, 4);
  INSERT INTO t1 VALUES(5, 6);
  INSERT INTO t1 VALUES(7, 8);
  INSERT INTO t1 VALUES(9, 10);
  INSERT INTO t1 VALUES(11, 12);
  INSERT INTO t1 VALUES(13, 14);
  INSERT INTO t1 VALUES(15, 16);
  INSERT INTO t1 VALUES(17, 18);
  SELECT * FROM t1;
} {4000 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18}

do_test 4.8 {
  sqlite3 db2 test.db
  execsql { SELECT * FROM t1 } db2
} {1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18}

do_test 4.9 {
  db close
  db2 close
  lsort [glob test.db*]
} {test.db}

#-------------------------------------------------------------------------
reset_db
do_execsql_test 5.0 {
  CREATE TABLE t1(a INTEGER PRIMARY KEY, b, c);
  CREATE INDEX i1 ON t1(b, c);
  PRAGMA journal_mode = wal2;
  PRAGMA journal_size_limit = 4000;
} {wal2 4000}

proc wal_hook {DB nm nFrame} {
  $DB eval { PRAGMA wal_checkpoint }
}
db wal_hook [list wal_hook db]


foreach js {4000 8000 12000} {
  foreach NROW [list 100 200 300 400 500 600 1000] {
    do_test 5.$js.$NROW.1 {
      db eval "DELETE FROM t1"
      db eval "PRAGMA journal_size_limit = $js"
      set nTotal 0
      for {set i 0} {$i < $NROW} {incr i} {
        db eval { INSERT INTO t1 VALUES($i, $i, randomblob(abs(random()%50))) }
        incr nTotal $i
      }
      set {} {}
    } {}

    do_test 5.$js.$NROW.2 {
      sqlite3 db2 test.db
      db2 eval { 
        PRAGMA integrity_check;
        SELECT count(*), sum(b) FROM t1;
      }
    } [list ok $NROW $nTotal]

    db2 close
  }
}


#-------------------------------------------------------------------------
reset_db
do_execsql_test 6.0 {
  CREATE TABLE tx(x);
  PRAGMA journal_mode = wal2;
  PRAGMA journal_size_limit = 3500;
} {wal2 3500}

do_test 6.1 {
  for {set i 0} {$i < 10} {incr i} {
    execsql "CREATE TABLE t$i (x);"
  }
} {}

puts "[file size test.db-wal] [file size test.db-wal2]"

do_test 6.2.1 {
  foreach f [glob -nocomplain test.db2*] { forcedelete $f }
  forcecopy test.db-wal2 test.db2-wal2
  sqlite3 db2 test.db2
  db2 eval { SELECT * FROM sqlite_master }
} {}
do_test 6.2.2 {
  db2 eval {
    PRAGMA journal_mode = wal2;
    SELECT * FROM sqlite_master;
  }
} {wal2}

do_test 6.3.1 {
  db2 close
  foreach f [glob -nocomplain test.db2*] { forcedelete $f }
  forcecopy test.db-wal2 test.db2-wal2
  forcecopy test.db test.db2
  sqlite3 db2 test.db2
  db2 eval { SELECT * FROM sqlite_master }
} {table tx tx 2 {CREATE TABLE tx(x)}}
do_test 6.3.2 {
  db2 eval {
    PRAGMA journal_mode = wal2;
    SELECT * FROM sqlite_master;
  }
} {wal2 table tx tx 2 {CREATE TABLE tx(x)}}

do_test 6.4.1 {
  db2 close
  foreach f [glob -nocomplain test.db2*] { forcedelete $f }
  forcecopy test.db-wal2 test.db2-wal2
  forcecopy test.db-wal test.db2-wal
  sqlite3 db2 test.db2
  db2 eval { SELECT * FROM sqlite_master }
} {}
do_test 6.4.2 {
  db2 eval {
    PRAGMA journal_mode = wal2;
    SELECT * FROM sqlite_master;
  }
} {wal2}
db2 close

finish_test

#
proc lock_callback {method filename handle lock} {
  if {$lock=="0 1 lock exclusive"} {
    proc lock_callback {method filename handle lock} {}
    db2 eval { INSERT INTO x VALUES('x') }
  }
}
db timeout 10
do_catchsql_test 2.4 {
  BEGIN EXCLUSIVE;
} {0 {}}
do_execsql_test 2.5 {
  SELECT * FROM x;
  COMMIT;
} {z y x}

finish_test

#
proc lock_callback {method filename handle lock} {
  if {$lock=="0 1 lock exclusive"} {
    proc lock_callback {method filename handle lock} {}
    db2 eval { INSERT INTO x VALUES('x') }
  }
}
db timeout 1100
do_catchsql_test 2.4 {
  BEGIN EXCLUSIVE;
} {0 {}}
do_execsql_test 2.5 {
  SELECT * FROM x;
  COMMIT;
} {z y x}

finish_test