SQLite

/* The minimum PMA size is set to this value multiplied by the database
** page size in bytes.
*/
#ifndef SQLITE_SORTER_PMASZ
# define SQLITE_SORTER_PMASZ 250
#endif

/* Statement journals spill to disk when their size exceeds the following
** threashold (in bytes). 0 means that statement journals are created and
** written to disk immediately (the default behavior for SQLite versions
** before 3.12.0).  -1 means always keep the entire statement journal in
** memory.  (The statement journal is also always held entirely in memory
** if journal_mode=MEMORY or if temp_store=MEMORY, regardless of this
** setting.)
*/
#ifndef SQLITE_STMTJRNL_SPILL 
# define SQLITE_STMTJRNL_SPILL (64*1024)
#endif

/*
** The following singleton contains the global configuration for
** the SQLite library.
*/
SQLITE_WSD struct Sqlite3Config sqlite3Config = {
   SQLITE_DEFAULT_MEMSTATUS,  /* bMemstat */
   1,                         /* bCoreMutex */
   SQLITE_THREADSAFE==1,      /* bFullMutex */
   SQLITE_USE_URI,            /* bOpenUri */
   SQLITE_ALLOW_COVERING_INDEX_SCAN,   /* bUseCis */
   0x7ffffffe,                /* mxStrlen */
   0,                         /* neverCorrupt */
   128,                       /* szLookaside */
   500,                       /* nLookaside */
   SQLITE_STMTJRNL_SPILL,     /* nStmtSpill */
   {0,0,0,0,0,0,0,0},         /* m */
   {0,0,0,0,0,0,0,0,0},       /* mutex */
   {0,0,0,0,0,0,0,0,0,0,0,0,0},/* pcache2 */
   (void*)0,                  /* pHeap */
   0,                         /* nHeap */
   0, 0,                      /* mnHeap, mxHeap */
   SQLITE_DEFAULT_MMAP_SIZE,  /* szMmap */

    }
#endif

    case SQLITE_CONFIG_PMASZ: {
      sqlite3GlobalConfig.szPma = va_arg(ap, unsigned int);
      break;
    }

    case SQLITE_CONFIG_STMTJRNL_SPILL: {
      sqlite3GlobalConfig.nStmtSpill = va_arg(ap, int);
      break;
    }

    default: {
      rc = SQLITE_ERROR;
      break;
    }
  }
  va_end(ap);

*/
static int openSubJournal(Pager *pPager){
  int rc = SQLITE_OK;
  if( !isOpen(pPager->sjfd) ){
    const int flags =  SQLITE_OPEN_SUBJOURNAL | SQLITE_OPEN_READWRITE 
      | SQLITE_OPEN_CREATE | SQLITE_OPEN_EXCLUSIVE 
      | SQLITE_OPEN_DELETEONCLOSE;
    int nStmtSpill = sqlite3Config.nStmtSpill;
    if( pPager->journalMode==PAGER_JOURNALMODE_MEMORY || pPager->subjInMemory ){
      nStmtSpill = -1;
    }
    rc = sqlite3JournalOpen(pPager->pVfs, 0, pPager->sjfd, flags, nStmtSpill);
  }
  return rc;
}

/*
** Append a record of the current state of page pPg to the sub-journal. 
**

** is an unsigned integer and sets the "Minimum PMA Size" for the multithreaded
** sorter to that integer.  The default minimum PMA Size is set by the
** [SQLITE_SORTER_PMASZ] compile-time option.  New threads are launched
** to help with sort operations when multithreaded sorting
** is enabled (using the [PRAGMA threads] command) and the amount of content
** to be sorted exceeds the page size times the minimum of the
** [PRAGMA cache_size] setting and this value.
**
** [[SQLITE_CONFIG_STMTJRNL_SPILL]]
** <dt>SQLITE_CONFIG_STMTJRNL_SPILL
** <dd>^The SQLITE_CONFIG_STMTJRNL_SPILL option takes a single parameter which
** becomes the [statement journal] spill-to-disk threshold.  
** [Statement journals] are held in memory until their size (in bytes)
** exceeds this threshold, at which point they are written to disk.
** Or if the threshold is -1, statement journals are always held
** exclusively in memory.
** Since many statement journals never become large, setting the spill
** threshold to a value such as 64KiB can greatly reduce the amount of
** I/O required to support statement rollback.
** The default value for this setting is controlled by the
** [SQLITE_STMTJRNL_SPILL] compile-time option.
** </dl>
*/
#define SQLITE_CONFIG_SINGLETHREAD  1  /* nil */
#define SQLITE_CONFIG_MULTITHREAD   2  /* nil */
#define SQLITE_CONFIG_SERIALIZED    3  /* nil */
#define SQLITE_CONFIG_MALLOC        4  /* sqlite3_mem_methods* */
#define SQLITE_CONFIG_GETMALLOC     5  /* sqlite3_mem_methods* */

#define SQLITE_CONFIG_GETPCACHE2   19  /* sqlite3_pcache_methods2* */
#define SQLITE_CONFIG_COVERING_INDEX_SCAN 20  /* int */
#define SQLITE_CONFIG_SQLLOG       21  /* xSqllog, void* */
#define SQLITE_CONFIG_MMAP_SIZE    22  /* sqlite3_int64, sqlite3_int64 */
#define SQLITE_CONFIG_WIN32_HEAPSIZE      23  /* int nByte */
#define SQLITE_CONFIG_PCACHE_HDRSZ        24  /* int *psz */
#define SQLITE_CONFIG_PMASZ               25  /* unsigned int szPma */
#define SQLITE_CONFIG_STMTJRNL_SPILL      26  /* int nByte */

/*
** CAPI3REF: Database Connection Configuration Options
**
** These constants are the available integer configuration options that
** can be passed as the second argument to the [sqlite3_db_config()] interface.
**

  int bFullMutex;                   /* True to enable full mutexing */
  int bOpenUri;                     /* True to interpret filenames as URIs */
  int bUseCis;                      /* Use covering indices for full-scans */
  int mxStrlen;                     /* Maximum string length */
  int neverCorrupt;                 /* Database is always well-formed */
  int szLookaside;                  /* Default lookaside buffer size */
  int nLookaside;                   /* Default lookaside buffer count */
  int nStmtSpill;                   /* Stmt-journal spill-to-disk threshold */
  sqlite3_mem_methods m;            /* Low-level memory allocation interface */
  sqlite3_mutex_methods mutex;      /* Low-level mutex interface */
  sqlite3_pcache_methods2 pcache2;  /* Low-level page-cache interface */
  void *pHeap;                      /* Heap storage space */
  int nHeap;                        /* Size of pHeap[] */
  int mnReq, mxReq;                 /* Min and max heap requests sizes */
  sqlite3_int64 szMmap;             /* mmap() space per open file */