SQLite

/*
** 2004 April 6
**
** The author disclaims copyright to this source code.  In place of
** a legal notice, here is a blessing:
**
**    May you do good and not evil.
**    May you find forgiveness for yourself and forgive others.
**    May you share freely, never taking more than you give.
**
*************************************************************************
** $Id: btree.c,v 1.378 2007/05/08 14:51:37 drh Exp $
**
** This file implements a external (disk-based) database using BTrees.
** See the header comment on "btreeInt.h" for additional information.
** Including a description of file format and an overview of operation.
*/
#include "btreeInt.h"

*/
int sqlite3BtreeGetPageSize(Btree *p){
  return p->pBt->pageSize;
}
int sqlite3BtreeGetReserve(Btree *p){
  return p->pBt->pageSize - p->pBt->usableSize;
}

/*
** Set the maximum page count for a database if mxPage is positive.
** No changes are made if mxPage is 0 or negative.
** Regardless of the value of mxPage, return the maximum page count.
*/
int sqlite3BtreeMaxPageCount(Btree *p, int mxPage){
  return sqlite3PagerMaxPageCount(p->pBt->pPager, mxPage);
}
#endif /* !defined(SQLITE_OMIT_PAGER_PRAGMAS) || !defined(SQLITE_OMIT_VACUUM) */

/*
** Change the 'auto-vacuum' property of the database. If the 'autoVacuum'
** parameter is non-zero, then auto-vacuum mode is enabled. If zero, it
** is disabled. The default value for the auto-vacuum property is 
** determined by the SQLITE_DEFAULT_AUTOVACUUM macro.

**    May you share freely, never taking more than you give.
**
*************************************************************************
** This header file defines the interface that the sqlite B-Tree file
** subsystem.  See comments in the source code for a detailed description
** of what each interface routine does.
**
** @(#) $Id: btree.h,v 1.81 2007/05/08 14:51:37 drh Exp $
*/
#ifndef _BTREE_H_
#define _BTREE_H_

/* TODO: This definition is just included so other modules compile. It
** needs to be revisited.
*/

int sqlite3BtreeClose(Btree*);
int sqlite3BtreeSetBusyHandler(Btree*,BusyHandler*);
int sqlite3BtreeSetCacheSize(Btree*,int);
int sqlite3BtreeSetSafetyLevel(Btree*,int,int);
int sqlite3BtreeSyncDisabled(Btree*);
int sqlite3BtreeSetPageSize(Btree*,int,int);
int sqlite3BtreeGetPageSize(Btree*);
int sqlite3BtreeMaxPageCount(Btree*,int);
int sqlite3BtreeGetReserve(Btree*);
int sqlite3BtreeSetAutoVacuum(Btree *, int);
int sqlite3BtreeGetAutoVacuum(Btree *);
int sqlite3BtreeBeginTrans(Btree*,int);
int sqlite3BtreeCommitPhaseOne(Btree*, const char *zMaster);
int sqlite3BtreeCommitPhaseTwo(Btree*);
int sqlite3BtreeCommit(Btree*);

**    May you find forgiveness for yourself and forgive others.
**    May you share freely, never taking more than you give.
**
*************************************************************************
** 
** This file defines various limits of what SQLite can process.
**
** @(#) $Id: limits.h,v 1.3 2007/05/08 14:51:37 drh Exp $
*/

/*
** The maximum length of a TEXT or BLOB in bytes.   This also
** limits the size of a row in a table or index.
**
** The hard limit is the ability of a 32-bit signed integer

*/
#ifndef SQLITE_MAX_PAGE_SIZE
# define SQLITE_MAX_PAGE_SIZE 32768
#endif

/*
** Maximum number of pages in one database file.
**
** This is really just the default value for the max_page_count pragma.
** This value can be lowered (or raised) at run-time using that the
** max_page_count macro.
*/
#ifndef SQLITE_MAX_PAGE_COUNT
# define SQLITE_MAX_PAGE_COUNT 1073741823
#endif

** The pager is used to access a database disk file.  It implements
** atomic commit and rollback through the use of a journal file that
** is separate from the database file.  The pager also implements file
** locking to prevent two processes from writing the same database
** file simultaneously, or one process from reading the database while
** another is writing.
**
** @(#) $Id: pager.c,v 1.337 2007/05/08 14:51:37 drh Exp $
*/
#ifndef SQLITE_OMIT_DISKIO
#include "sqliteInt.h"
#include "os.h"
#include "pager.h"
#include <assert.h>
#include <string.h>

  int stmtSize;               /* Size of database (in pages) at stmt_begin() */
  int nRec;                   /* Number of pages written to the journal */
  u32 cksumInit;              /* Quasi-random value added to every checksum */
  int stmtNRec;               /* Number of records in stmt subjournal */
  int nExtra;                 /* Add this many bytes to each in-memory page */
  int pageSize;               /* Number of bytes in a page */
  int nPage;                  /* Total number of in-memory pages */

  int nRef;                   /* Number of in-memory pages with PgHdr.nRef>0 */
  int mxPage;                 /* Maximum number of pages to hold in cache */
  Pgno mxPgno;                /* Maximum allowed size of the database */
  u8 *aInJournal;             /* One bit for each page in the database file */
  u8 *aInStmt;                /* One bit for each page in the database */
  char *zFilename;            /* Name of the database file */
  char *zJournal;             /* Name of the journal file */
  char *zDirectory;           /* Directory hold database and journal files */
  OsFile *fd, *jfd;           /* File descriptors for database and journal */
  OsFile *stfd;               /* File descriptor for the statement subjournal*/

  /* pPager->stmtInUse = 0; */
  /* pPager->nRef = 0; */
  pPager->dbSize = memDb-1;
  pPager->pageSize = SQLITE_DEFAULT_PAGE_SIZE;
  /* pPager->stmtSize = 0; */
  /* pPager->stmtJSize = 0; */
  /* pPager->nPage = 0; */

  pPager->mxPage = 100;
  pPager->mxPgno = SQLITE_MAX_PAGE_COUNT;
  assert( PAGER_UNLOCK==0 );
  /* pPager->state = PAGER_UNLOCK; */
  /* pPager->errMask = 0; */
  pPager->tempFile = tempFile;
  assert( tempFile==PAGER_LOCKINGMODE_NORMAL 
          || tempFile==PAGER_LOCKINGMODE_EXCLUSIVE );
  assert( PAGER_LOCKINGMODE_EXCLUSIVE==1 );

  if( !pPager->memDb && pPager->nRef==0 ){
    pager_reset(pPager);
    pPager->pageSize = pageSize;
    pPager->pTmpSpace = sqlite3ReallocOrFree(pPager->pTmpSpace, pageSize);
  }
  return pPager->pageSize;
}

/*
** Attempt to set the maximum database page count if mxPage is positive. 
** Make no changes if mxPage is zero or negative.  And never reduce the
** maximum page count below the current size of the database.
**
** Regardless of mxPage, return the current maximum page count.
*/
int sqlite3PagerMaxPageCount(Pager *pPager, int mxPage){
  if( mxPage>0 ){
    pPager->mxPgno = mxPage;
  }
  sqlite3PagerPagecount(pPager);
  return pPager->mxPgno;
}

/*
** The following set of routines are used to disable the simulated
** I/O error mechanism.  These routines are used to avoid simulated
** errors in places where we do not care about errors.
**
** Unless -DSQLITE_TEST=1 is used, these routines are all no-ops

    }
    if( pPager->state!=PAGER_UNLOCK ){
      pPager->dbSize = n;
    }
  }
  if( n==(PENDING_BYTE/pPager->pageSize) ){
    n++;
  }
  if( n>pPager->mxPgno ){
    pPager->mxPgno = n;
  }
  return n;
}


#ifndef SQLITE_OMIT_MEMORYDB
/*

    if( MEMDB ){
      memset(PGHDR_TO_HIST(pPg, pPager), 0, sizeof(PgHistory));
    }
    pPg->pPager = pPager;
    pPg->pNextAll = pPager->pAll;
    pPager->pAll = pPg;
    pPager->nPage++;




  }else{
    /* Recycle an existing page with a zero ref-count. */
    rc = pager_recycle(pPager, 1, &pPg);
    if( rc!=SQLITE_OK ){
      goto pager_allocate_out;
    }
    assert( pPager->state>=SHARED_LOCK );

      return rc;
    }

    /* Populate the page with data, either by reading from the database
    ** file, or by setting the entire page to zero.
    */
    if( nMax<(int)pgno || MEMDB || (noContent && !pPager->alwaysRollback) ){
      if( pgno>pPager->mxPgno ){
        return SQLITE_FULL;
      }
      memset(PGHDR_TO_DATA(pPg), 0, pPager->pageSize);
      pPg->needRead = noContent && !pPager->alwaysRollback;
      IOTRACE(("ZERO %p %d\n", pPager, pgno));
    }else{
      rc = readDbPage(pPager, pPg, pgno);
      if( rc!=SQLITE_OK && rc!=SQLITE_IOERR_SHORT_READ ){
        pPg->pgno = 0;

**    May you share freely, never taking more than you give.
**
*************************************************************************
** This header file defines the interface that the sqlite page cache
** subsystem.  The page cache subsystem reads and writes a file a page
** at a time and provides a journal for rollback.
**
** @(#) $Id: pager.h,v 1.60 2007/05/08 14:51:37 drh Exp $
*/

#ifndef _PAGER_H_
#define _PAGER_H_

/*
** The type used to represent a page number.  The first page in a file

*/
int sqlite3PagerOpen(Pager **ppPager, const char *zFilename,
                     int nExtra, int flags);
void sqlite3PagerSetBusyhandler(Pager*, BusyHandler *pBusyHandler);
void sqlite3PagerSetDestructor(Pager*, void(*)(DbPage*,int));
void sqlite3PagerSetReiniter(Pager*, void(*)(DbPage*,int));
int sqlite3PagerSetPagesize(Pager*, int);
int sqlite3PagerMaxPageCount(Pager*, int);
int sqlite3PagerReadFileheader(Pager*, int, unsigned char*);
void sqlite3PagerSetCachesize(Pager*, int);
int sqlite3PagerClose(Pager *pPager);
int sqlite3PagerAcquire(Pager *pPager, Pgno pgno, DbPage **ppPage, int clrFlag);
#define sqlite3PagerGet(A,B,C) sqlite3PagerAcquire(A,B,C,0)
DbPage *sqlite3PagerLookup(Pager *pPager, Pgno pgno);
int sqlite3PagerRef(DbPage*);

/*
** 2003 April 6
**
** The author disclaims copyright to this source code.  In place of
** a legal notice, here is a blessing:
**
**    May you do good and not evil.
**    May you find forgiveness for yourself and forgive others.
**    May you share freely, never taking more than you give.
**
*************************************************************************
** This file contains code used to implement the PRAGMA command.
**
** $Id: pragma.c,v 1.136 2007/05/08 14:51:37 drh Exp $
*/
#include "sqliteInt.h"
#include "os.h"
#include <ctype.h>

/* Ignore this whole file if pragmas are disabled
*/

      int size = pBt ? sqlite3BtreeGetPageSize(pBt) : 0;
      returnSingleInt(pParse, "page_size", size);
    }else{
      sqlite3BtreeSetPageSize(pBt, atoi(zRight), -1);
    }
  }else

  /*
  **  PRAGMA [database.]max_page_count
  **  PRAGMA [database.]max_page_count=N
  **
  ** The first form reports the current setting for the
  ** maximum number of pages in the database file.  The 
  ** second form attempts to change this setting.  Both
  ** forms return the current setting.
  */
  if( sqlite3StrICmp(zLeft,"max_page_count")==0 ){
    Btree *pBt = pDb->pBt;
    int newMax = 0;
    if( zRight ){
      newMax = atoi(zRight);
    }
    if( pBt ){
      newMax = sqlite3BtreeMaxPageCount(pBt, newMax);
    }
    returnSingleInt(pParse, "max_page_count", newMax);
  }else

  /*
  **  PRAGMA [database.]locking_mode
  **  PRAGMA [database.]locking_mode = (normal|exclusive)
  */
  if( sqlite3StrICmp(zLeft,"locking_mode")==0 ){
    const char *zRet = "normal";
    int eMode = getLockingMode(zRight);

#
# Run this Tcl script to generate the pragma.html file.
#
set rcsid {$Id: pragma.tcl,v 1.24 2007/05/08 14:51:37 drh Exp $}
source common.tcl
header {Pragma statements supported by SQLite}

proc Section {name {label {}}} {
  puts "\n<hr />"
  if {$label!=""} {
    puts "<a name=\"$label\"></a>"

    may only be set if the database has not yet been created. The page
    size must be a power of two greater than or equal to 512 and less
    than or equal to 8192. The upper limit may be modified by setting
    the value of macro SQLITE_MAX_PAGE_SIZE during compilation.  The
    maximum upper bound is 32768.
    </p>
</li>

<a name="pragma_max_page_count"></a>
<li><p><b>PRAGMA max_page_count;
       <br>PRAGMA max_page_count = </b><i>N</i><b>;</b></p>
    <p>Query or set the maximum number of pages in the database file.
    Both forms of the pragma return the maximum page count.  The second
    form attempts to modify the maximum page count.  The maximum page
    count cannot be reduced below the current database size.
    </p>
</li>

<a name="pragma_read_uncommitted"></a>
<li><p><b>PRAGMA read_uncommitted;
       <br>PRAGMA read_uncommitted = </b><i>0 | 1</i><b>;</b></p>
    <p>Query, set, or clear READ UNCOMMITTED isolation.  The default isolation
    level for SQLite is SERIALIZABLE.  Any process or thread can select
    READ UNCOMMITTED isolation, but SERIALIZABLE will still be used except