return SQLITE_OK;
    }
    dropCell(pPage, idx, info.nSize, &rc);
    if( rc ) goto end_insert;
  }else if( loc<0 && pPage->nCell>0 ){
    assert( pPage->leaf );
    idx = ++pCur->ix;

  }else{
    assert( pPage->leaf );
  }
  insertCell(pPage, idx, newCell, szNew, 0, 0, &rc);
  assert( pPage->nOverflow==0 || rc==SQLITE_OK );
  assert( rc!=SQLITE_OK || pPage->nCell>0 || pPage->nOverflow>0 );

      return SQLITE_OK;
    }
    dropCell(pPage, idx, info.nSize, &rc);
    if( rc ) goto end_insert;
  }else if( loc<0 && pPage->nCell>0 ){
    assert( pPage->leaf );
    idx = ++pCur->ix;
    pCur->curFlags &= ~BTCF_ValidNKey;
  }else{
    assert( pPage->leaf );
  }
  insertCell(pPage, idx, newCell, szNew, 0, 0, &rc);
  assert( pPage->nOverflow==0 || rc==SQLITE_OK );
  assert( rc!=SQLITE_OK || pPage->nCell>0 || pPage->nOverflow>0 );

#
# This file focuses on making sure that combinations of REPLACE,
# IGNORE, and FAIL conflict resolution play well together.
#

set testdir [file dirname $argv0]
source $testdir/tester.tcl


ifcapable !conflict {
  finish_test
  return
}

do_execsql_test conflict-1.1 {
  CREATE TABLE t1(
    a INTEGER PRIMARY KEY ON CONFLICT REPLACE, 
    b UNIQUE ON CONFLICT IGNORE,
    c UNIQUE ON CONFLICT FAIL
  );
  INSERT INTO t1(a,b,c) VALUES(1,2,3), (2,3,4);
  SELECT a,b,c FROM t1 ORDER BY a;
} {1 2 3 2 3 4}

# Insert a row that conflicts on column B.  The insert should be ignored.
#
do_execsql_test conflict-1.2 {
  INSERT INTO t1(a,b,c) VALUES(3,2,5);
  SELECT a,b,c FROM t1 ORDER BY a;
} {1 2 3 2 3 4}

# Insert two rows where the second conflicts on C.  The first row show go
# and and then there should be a constraint error.
#
do_test conflict-1.3 {
  catchsql {INSERT INTO t1(a,b,c) VALUES(4,5,6), (5,6,4);}
} {1 {UNIQUE constraint failed: t1.c}}
do_execsql_test conflict-1.4 {
  SELECT a,b,c FROM t1 ORDER BY a;
} {1 2 3 2 3 4 4 5 6}

# Replete the tests above, but this time on a table non-INTEGER primary key.
#
do_execsql_test conflict-2.1 {
  DROP TABLE t1;
  CREATE TABLE t1(
    a INT PRIMARY KEY ON CONFLICT REPLACE, 
    b UNIQUE ON CONFLICT IGNORE,
    c UNIQUE ON CONFLICT FAIL
  );
  INSERT INTO t1(a,b,c) VALUES(1,2,3), (2,3,4);
  SELECT a,b,c FROM t1 ORDER BY a;
} {1 2 3 2 3 4}

# Insert a row that conflicts on column B.  The insert should be ignored.
#
do_execsql_test conflict-2.2 {
  INSERT INTO t1(a,b,c) VALUES(3,2,5);
  SELECT a,b,c FROM t1 ORDER BY a;
} {1 2 3 2 3 4}

# Insert two rows where the second conflicts on C.  The first row show go
# and and then there should be a constraint error.
#
do_test conflict-2.3 {
  catchsql {INSERT INTO t1(a,b,c) VALUES(4,5,6), (5,6,4);}
} {1 {UNIQUE constraint failed: t1.c}}
do_execsql_test conflict-2.4 {
  SELECT a,b,c FROM t1 ORDER BY a;
} {1 2 3 2 3 4 4 5 6}

# Replete again on a WITHOUT ROWID table.
#
do_execsql_test conflict-3.1 {
  DROP TABLE t1;
  CREATE TABLE t1(
    a INT PRIMARY KEY ON CONFLICT REPLACE, 
    b UNIQUE ON CONFLICT IGNORE,
    c UNIQUE ON CONFLICT FAIL
  ) WITHOUT ROWID;
  INSERT INTO t1(a,b,c) VALUES(1,2,3), (2,3,4);
  SELECT a,b,c FROM t1 ORDER BY a;
} {1 2 3 2 3 4}

# Insert a row that conflicts on column B.  The insert should be ignored.
#
do_execsql_test conflict-3.2 {
  INSERT INTO t1(a,b,c) VALUES(3,2,5);
  SELECT a,b,c FROM t1 ORDER BY a;
} {1 2 3 2 3 4}

# Insert two rows where the second conflicts on C.  The first row show go
# and and then there should be a constraint error.
#
do_test conflict-3.3 {
  catchsql {INSERT INTO t1(a,b,c) VALUES(4,5,6), (5,6,4);}
} {1 {UNIQUE constraint failed: t1.c}}
do_execsql_test conflict-3.4 {
  SELECT a,b,c FROM t1 ORDER BY a;
} {1 2 3 2 3 4 4 5 6}

# Arrange the table rows in a different order and repeat.
#
do_execsql_test conflict-4.1 {
  DROP TABLE t1;
  CREATE TABLE t1(
    b UNIQUE ON CONFLICT IGNORE,
    c UNIQUE ON CONFLICT FAIL,
    a INT PRIMARY KEY ON CONFLICT REPLACE
  ) WITHOUT ROWID;
  INSERT INTO t1(a,b,c) VALUES(1,2,3), (2,3,4);
  SELECT a,b,c FROM t1 ORDER BY a;
} {1 2 3 2 3 4}

# Insert a row that conflicts on column B.  The insert should be ignored.
#
do_execsql_test conflict-4.2 {
  INSERT INTO t1(a,b,c) VALUES(3,2,5);
  SELECT a,b,c FROM t1 ORDER BY a;
} {1 2 3 2 3 4}

# Insert two rows where the second conflicts on C.  The first row show go
# and and then there should be a constraint error.
#
do_test conflict-4.3 {
  catchsql {INSERT INTO t1(a,b,c) VALUES(4,5,6), (5,6,4);}
} {1 {UNIQUE constraint failed: t1.c}}
do_execsql_test conflict-4.4 {
  SELECT a,b,c FROM t1 ORDER BY a;
} {1 2 3 2 3 4 4 5 6}

# Arrange the table rows in a different order and repeat.
#
do_execsql_test conflict-5.1 {
  DROP TABLE t1;
  CREATE TABLE t1(
    b UNIQUE ON CONFLICT IGNORE,
    a INT PRIMARY KEY ON CONFLICT REPLACE,
    c UNIQUE ON CONFLICT FAIL
  );
  INSERT INTO t1(a,b,c) VALUES(1,2,3), (2,3,4);
  SELECT a,b,c FROM t1 ORDER BY a;
} {1 2 3 2 3 4}

# Insert a row that conflicts on column B.  The insert should be ignored.
#
do_execsql_test conflict-5.2 {
  INSERT INTO t1(a,b,c) VALUES(3,2,5);
  SELECT a,b,c FROM t1 ORDER BY a;
} {1 2 3 2 3 4}

# Insert two rows where the second conflicts on C.  The first row show go
# and and then there should be a constraint error.
#
do_test conflict-5.3 {
  catchsql {INSERT INTO t1(a,b,c) VALUES(4,5,6), (5,6,4);}
} {1 {UNIQUE constraint failed: t1.c}}
do_execsql_test conflict-5.4 {
  SELECT a,b,c FROM t1 ORDER BY a;
} {1 2 3 2 3 4 4 5 6}

# Arrange the table rows in a different order and repeat.
#
do_execsql_test conflict-6.1 {
  DROP TABLE t1;
  CREATE TABLE t1(
    c UNIQUE ON CONFLICT FAIL,
    a INT PRIMARY KEY ON CONFLICT REPLACE,
    b UNIQUE ON CONFLICT IGNORE
  );
  INSERT INTO t1(a,b,c) VALUES(1,2,3), (2,3,4);
  SELECT a,b,c FROM t1 ORDER BY a;
} {1 2 3 2 3 4}

# Insert a row that conflicts on column B.  The insert should be ignored.
#
do_execsql_test conflict-6.2 {
  INSERT INTO t1(a,b,c) VALUES(3,2,5);
  SELECT a,b,c FROM t1 ORDER BY a;
} {1 2 3 2 3 4}

# Insert two rows where the second conflicts on C.  The first row show go
# and and then there should be a constraint error.
#
do_test conflict-6.3 {
  catchsql {INSERT INTO t1(a,b,c) VALUES(4,5,6), (5,6,4);}
} {1 {UNIQUE constraint failed: t1.c}}
do_execsql_test conflict-6.4 {
  SELECT a,b,c FROM t1 ORDER BY a;
} {1 2 3 2 3 4 4 5 6}

# Change which column is the PRIMARY KEY
#
do_execsql_test conflict-7.1 {
  DROP TABLE t1;
  CREATE TABLE t1(
    a UNIQUE ON CONFLICT REPLACE, 
    b INTEGER PRIMARY KEY ON CONFLICT IGNORE,
    c UNIQUE ON CONFLICT FAIL
  );
  INSERT INTO t1(a,b,c) VALUES(1,2,3), (2,3,4);
  SELECT a,b,c FROM t1 ORDER BY a;
} {1 2 3 2 3 4}

# Insert a row that conflicts on column B.  The insert should be ignored.
#
do_execsql_test conflict-7.2 {
  INSERT INTO t1(a,b,c) VALUES(3,2,5);
  SELECT a,b,c FROM t1 ORDER BY a;
} {1 2 3 2 3 4}

# Insert two rows where the second conflicts on C.  The first row show go
# and and then there should be a constraint error.
#
do_test conflict-7.3 {
  catchsql {INSERT INTO t1(a,b,c) VALUES(4,5,6), (5,6,4);}
} {1 {UNIQUE constraint failed: t1.c}}
do_execsql_test conflict-7.4 {
  SELECT a,b,c FROM t1 ORDER BY a;
} {1 2 3 2 3 4 4 5 6}

# Change which column is the PRIMARY KEY
#
do_execsql_test conflict-8.1 {
  DROP TABLE t1;
  CREATE TABLE t1(
    a UNIQUE ON CONFLICT REPLACE, 
    b INT PRIMARY KEY ON CONFLICT IGNORE,
    c UNIQUE ON CONFLICT FAIL
  );
  INSERT INTO t1(a,b,c) VALUES(1,2,3), (2,3,4);
  SELECT a,b,c FROM t1 ORDER BY a;
} {1 2 3 2 3 4}

# Insert a row that conflicts on column B.  The insert should be ignored.
#
do_execsql_test conflict-8.2 {
  INSERT INTO t1(a,b,c) VALUES(3,2,5);
  SELECT a,b,c FROM t1 ORDER BY a;
} {1 2 3 2 3 4}

# Insert two rows where the second conflicts on C.  The first row show go
# and and then there should be a constraint error.
#
do_test conflict-8.3 {
  catchsql {INSERT INTO t1(a,b,c) VALUES(4,5,6), (5,6,4);}
} {1 {UNIQUE constraint failed: t1.c}}
do_execsql_test conflict-8.4 {
  SELECT a,b,c FROM t1 ORDER BY a;
} {1 2 3 2 3 4 4 5 6}

# Change which column is the PRIMARY KEY
#
do_execsql_test conflict-9.1 {
  DROP TABLE t1;
  CREATE TABLE t1(
    a UNIQUE ON CONFLICT REPLACE, 
    b INT PRIMARY KEY ON CONFLICT IGNORE,
    c UNIQUE ON CONFLICT FAIL
  ) WITHOUT ROWID;
  INSERT INTO t1(a,b,c) VALUES(1,2,3), (2,3,4);
  SELECT a,b,c FROM t1 ORDER BY a;
} {1 2 3 2 3 4}

# Insert a row that conflicts on column B.  The insert should be ignored.
#
do_execsql_test conflict-9.2 {
  INSERT INTO t1(a,b,c) VALUES(3,2,5);
  SELECT a,b,c FROM t1 ORDER BY a;
} {1 2 3 2 3 4}

# Insert two rows where the second conflicts on C.  The first row show go
# and and then there should be a constraint error.
#
do_test conflict-9.3 {
  catchsql {INSERT INTO t1(a,b,c) VALUES(4,5,6), (5,6,4);}
} {1 {UNIQUE constraint failed: t1.c}}
do_execsql_test conflict-9.4 {
  SELECT a,b,c FROM t1 ORDER BY a;
} {1 2 3 2 3 4 4 5 6}

# Change which column is the PRIMARY KEY
#
do_execsql_test conflict-10.1 {
  DROP TABLE t1;
  CREATE TABLE t1(
    a UNIQUE ON CONFLICT REPLACE, 
    b UNIQUE ON CONFLICT IGNORE,
    c INTEGER PRIMARY KEY ON CONFLICT FAIL
  );
  INSERT INTO t1(a,b,c) VALUES(1,2,3), (2,3,4);
  SELECT a,b,c FROM t1 ORDER BY a;
} {1 2 3 2 3 4}

# Insert a row that conflicts on column B.  The insert should be ignored.
#
do_execsql_test conflict-10.2 {
  INSERT INTO t1(a,b,c) VALUES(3,2,5);
  SELECT a,b,c FROM t1 ORDER BY a;
} {1 2 3 2 3 4}

# Insert two rows where the second conflicts on C.  The first row show go
# and and then there should be a constraint error.
#
do_test conflict-10.3 {
  catchsql {INSERT INTO t1(a,b,c) VALUES(4,5,6), (5,6,4);}
} {1 {UNIQUE constraint failed: t1.c}}
do_execsql_test conflict-10.4 {
  SELECT a,b,c FROM t1 ORDER BY a;
} {1 2 3 2 3 4 4 5 6}

# Change which column is the PRIMARY KEY
#
do_execsql_test conflict-11.1 {
  DROP TABLE t1;
  CREATE TABLE t1(
    a UNIQUE ON CONFLICT REPLACE, 
    b UNIQUE ON CONFLICT IGNORE,
    c PRIMARY KEY ON CONFLICT FAIL
  ) WITHOUT ROWID;
  INSERT INTO t1(a,b,c) VALUES(1,2,3), (2,3,4);
  SELECT a,b,c FROM t1 ORDER BY a;
} {1 2 3 2 3 4}

# Insert a row that conflicts on column B.  The insert should be ignored.
#
do_execsql_test conflict-11.2 {
  INSERT INTO t1(a,b,c) VALUES(3,2,5);
  SELECT a,b,c FROM t1 ORDER BY a;
} {1 2 3 2 3 4}

# Insert two rows where the second conflicts on C.  The first row show go
# and and then there should be a constraint error.
#
do_test conflict-11.3 {
  catchsql {INSERT INTO t1(a,b,c) VALUES(4,5,6), (5,6,4);}
} {1 {UNIQUE constraint failed: t1.c}}
do_execsql_test conflict-11.4 {
  SELECT a,b,c FROM t1 ORDER BY a;
} {1 2 3 2 3 4 4 5 6}















finish_test

#
# This file focuses on making sure that combinations of REPLACE,
# IGNORE, and FAIL conflict resolution play well together.
#

set testdir [file dirname $argv0]
source $testdir/tester.tcl
set testprefix conflict3

ifcapable !conflict {
  finish_test
  return
}

do_execsql_test 1.1 {
  CREATE TABLE t1(
    a INTEGER PRIMARY KEY ON CONFLICT REPLACE, 
    b UNIQUE ON CONFLICT IGNORE,
    c UNIQUE ON CONFLICT FAIL
  );
  INSERT INTO t1(a,b,c) VALUES(1,2,3), (2,3,4);
  SELECT a,b,c FROM t1 ORDER BY a;
} {1 2 3 2 3 4}

# Insert a row that conflicts on column B.  The insert should be ignored.
#
do_execsql_test 1.2 {
  INSERT INTO t1(a,b,c) VALUES(3,2,5);
  SELECT a,b,c FROM t1 ORDER BY a;
} {1 2 3 2 3 4}

# Insert two rows where the second conflicts on C.  The first row show go
# and and then there should be a constraint error.
#
do_test 1.3 {
  catchsql {INSERT INTO t1(a,b,c) VALUES(4,5,6), (5,6,4);}
} {1 {UNIQUE constraint failed: t1.c}}
do_execsql_test 1.4 {
  SELECT a,b,c FROM t1 ORDER BY a;
} {1 2 3 2 3 4 4 5 6}

# Replete the tests above, but this time on a table non-INTEGER primary key.
#
do_execsql_test 2.1 {
  DROP TABLE t1;
  CREATE TABLE t1(
    a INT PRIMARY KEY ON CONFLICT REPLACE, 
    b UNIQUE ON CONFLICT IGNORE,
    c UNIQUE ON CONFLICT FAIL
  );
  INSERT INTO t1(a,b,c) VALUES(1,2,3), (2,3,4);
  SELECT a,b,c FROM t1 ORDER BY a;
} {1 2 3 2 3 4}

# Insert a row that conflicts on column B.  The insert should be ignored.
#
do_execsql_test 2.2 {
  INSERT INTO t1(a,b,c) VALUES(3,2,5);
  SELECT a,b,c FROM t1 ORDER BY a;
} {1 2 3 2 3 4}

# Insert two rows where the second conflicts on C.  The first row show go
# and and then there should be a constraint error.
#
do_test 2.3 {
  catchsql {INSERT INTO t1(a,b,c) VALUES(4,5,6), (5,6,4);}
} {1 {UNIQUE constraint failed: t1.c}}
do_execsql_test 2.4 {
  SELECT a,b,c FROM t1 ORDER BY a;
} {1 2 3 2 3 4 4 5 6}

# Replete again on a WITHOUT ROWID table.
#
do_execsql_test 3.1 {
  DROP TABLE t1;
  CREATE TABLE t1(
    a INT PRIMARY KEY ON CONFLICT REPLACE, 
    b UNIQUE ON CONFLICT IGNORE,
    c UNIQUE ON CONFLICT FAIL
  ) WITHOUT ROWID;
  INSERT INTO t1(a,b,c) VALUES(1,2,3), (2,3,4);
  SELECT a,b,c FROM t1 ORDER BY a;
} {1 2 3 2 3 4}

# Insert a row that conflicts on column B.  The insert should be ignored.
#
do_execsql_test 3.2 {
  INSERT INTO t1(a,b,c) VALUES(3,2,5);
  SELECT a,b,c FROM t1 ORDER BY a;
} {1 2 3 2 3 4}

# Insert two rows where the second conflicts on C.  The first row show go
# and and then there should be a constraint error.
#
do_test 3.3 {
  catchsql {INSERT INTO t1(a,b,c) VALUES(4,5,6), (5,6,4);}
} {1 {UNIQUE constraint failed: t1.c}}
do_execsql_test 3.4 {
  SELECT a,b,c FROM t1 ORDER BY a;
} {1 2 3 2 3 4 4 5 6}

# Arrange the table rows in a different order and repeat.
#
do_execsql_test 4.1 {
  DROP TABLE t1;
  CREATE TABLE t1(
    b UNIQUE ON CONFLICT IGNORE,
    c UNIQUE ON CONFLICT FAIL,
    a INT PRIMARY KEY ON CONFLICT REPLACE
  ) WITHOUT ROWID;
  INSERT INTO t1(a,b,c) VALUES(1,2,3), (2,3,4);
  SELECT a,b,c FROM t1 ORDER BY a;
} {1 2 3 2 3 4}

# Insert a row that conflicts on column B.  The insert should be ignored.
#
do_execsql_test 4.2 {
  INSERT INTO t1(a,b,c) VALUES(3,2,5);
  SELECT a,b,c FROM t1 ORDER BY a;
} {1 2 3 2 3 4}

# Insert two rows where the second conflicts on C.  The first row show go
# and and then there should be a constraint error.
#
do_test 4.3 {
  catchsql {INSERT INTO t1(a,b,c) VALUES(4,5,6), (5,6,4);}
} {1 {UNIQUE constraint failed: t1.c}}
do_execsql_test 4.4 {
  SELECT a,b,c FROM t1 ORDER BY a;
} {1 2 3 2 3 4 4 5 6}

# Arrange the table rows in a different order and repeat.
#
do_execsql_test 5.1 {
  DROP TABLE t1;
  CREATE TABLE t1(
    b UNIQUE ON CONFLICT IGNORE,
    a INT PRIMARY KEY ON CONFLICT REPLACE,
    c UNIQUE ON CONFLICT FAIL
  );
  INSERT INTO t1(a,b,c) VALUES(1,2,3), (2,3,4);
  SELECT a,b,c FROM t1 ORDER BY a;
} {1 2 3 2 3 4}

# Insert a row that conflicts on column B.  The insert should be ignored.
#
do_execsql_test 5.2 {
  INSERT INTO t1(a,b,c) VALUES(3,2,5);
  SELECT a,b,c FROM t1 ORDER BY a;
} {1 2 3 2 3 4}

# Insert two rows where the second conflicts on C.  The first row show go
# and and then there should be a constraint error.
#
do_test 5.3 {
  catchsql {INSERT INTO t1(a,b,c) VALUES(4,5,6), (5,6,4);}
} {1 {UNIQUE constraint failed: t1.c}}
do_execsql_test 5.4 {
  SELECT a,b,c FROM t1 ORDER BY a;
} {1 2 3 2 3 4 4 5 6}

# Arrange the table rows in a different order and repeat.
#
do_execsql_test 6.1 {
  DROP TABLE t1;
  CREATE TABLE t1(
    c UNIQUE ON CONFLICT FAIL,
    a INT PRIMARY KEY ON CONFLICT REPLACE,
    b UNIQUE ON CONFLICT IGNORE
  );
  INSERT INTO t1(a,b,c) VALUES(1,2,3), (2,3,4);
  SELECT a,b,c FROM t1 ORDER BY a;
} {1 2 3 2 3 4}

# Insert a row that conflicts on column B.  The insert should be ignored.
#
do_execsql_test 6.2 {
  INSERT INTO t1(a,b,c) VALUES(3,2,5);
  SELECT a,b,c FROM t1 ORDER BY a;
} {1 2 3 2 3 4}

# Insert two rows where the second conflicts on C.  The first row show go
# and and then there should be a constraint error.
#
do_test 6.3 {
  catchsql {INSERT INTO t1(a,b,c) VALUES(4,5,6), (5,6,4);}
} {1 {UNIQUE constraint failed: t1.c}}
do_execsql_test 6.4 {
  SELECT a,b,c FROM t1 ORDER BY a;
} {1 2 3 2 3 4 4 5 6}

# Change which column is the PRIMARY KEY
#
do_execsql_test 7.1 {
  DROP TABLE t1;
  CREATE TABLE t1(
    a UNIQUE ON CONFLICT REPLACE, 
    b INTEGER PRIMARY KEY ON CONFLICT IGNORE,
    c UNIQUE ON CONFLICT FAIL
  );
  INSERT INTO t1(a,b,c) VALUES(1,2,3), (2,3,4);
  SELECT a,b,c FROM t1 ORDER BY a;
} {1 2 3 2 3 4}

# Insert a row that conflicts on column B.  The insert should be ignored.
#
do_execsql_test 7.2 {
  INSERT INTO t1(a,b,c) VALUES(3,2,5);
  SELECT a,b,c FROM t1 ORDER BY a;
} {1 2 3 2 3 4}

# Insert two rows where the second conflicts on C.  The first row show go
# and and then there should be a constraint error.
#
do_test 7.3 {
  catchsql {INSERT INTO t1(a,b,c) VALUES(4,5,6), (5,6,4);}
} {1 {UNIQUE constraint failed: t1.c}}
do_execsql_test 7.4 {
  SELECT a,b,c FROM t1 ORDER BY a;
} {1 2 3 2 3 4 4 5 6}

# Change which column is the PRIMARY KEY
#
do_execsql_test 8.1 {
  DROP TABLE t1;
  CREATE TABLE t1(
    a UNIQUE ON CONFLICT REPLACE, 
    b INT PRIMARY KEY ON CONFLICT IGNORE,
    c UNIQUE ON CONFLICT FAIL
  );
  INSERT INTO t1(a,b,c) VALUES(1,2,3), (2,3,4);
  SELECT a,b,c FROM t1 ORDER BY a;
} {1 2 3 2 3 4}

# Insert a row that conflicts on column B.  The insert should be ignored.
#
do_execsql_test 8.2 {
  INSERT INTO t1(a,b,c) VALUES(3,2,5);
  SELECT a,b,c FROM t1 ORDER BY a;
} {1 2 3 2 3 4}

# Insert two rows where the second conflicts on C.  The first row show go
# and and then there should be a constraint error.
#
do_test 8.3 {
  catchsql {INSERT INTO t1(a,b,c) VALUES(4,5,6), (5,6,4);}
} {1 {UNIQUE constraint failed: t1.c}}
do_execsql_test 8.4 {
  SELECT a,b,c FROM t1 ORDER BY a;
} {1 2 3 2 3 4 4 5 6}

# Change which column is the PRIMARY KEY
#
do_execsql_test 9.1 {
  DROP TABLE t1;
  CREATE TABLE t1(
    a UNIQUE ON CONFLICT REPLACE, 
    b INT PRIMARY KEY ON CONFLICT IGNORE,
    c UNIQUE ON CONFLICT FAIL
  ) WITHOUT ROWID;
  INSERT INTO t1(a,b,c) VALUES(1,2,3), (2,3,4);
  SELECT a,b,c FROM t1 ORDER BY a;
} {1 2 3 2 3 4}

# Insert a row that conflicts on column B.  The insert should be ignored.
#
do_execsql_test 9.2 {
  INSERT INTO t1(a,b,c) VALUES(3,2,5);
  SELECT a,b,c FROM t1 ORDER BY a;
} {1 2 3 2 3 4}

# Insert two rows where the second conflicts on C.  The first row show go
# and and then there should be a constraint error.
#
do_test 9.3 {
  catchsql {INSERT INTO t1(a,b,c) VALUES(4,5,6), (5,6,4);}
} {1 {UNIQUE constraint failed: t1.c}}
do_execsql_test 9.4 {
  SELECT a,b,c FROM t1 ORDER BY a;
} {1 2 3 2 3 4 4 5 6}

# Change which column is the PRIMARY KEY
#
do_execsql_test 10.1 {
  DROP TABLE t1;
  CREATE TABLE t1(
    a UNIQUE ON CONFLICT REPLACE, 
    b UNIQUE ON CONFLICT IGNORE,
    c INTEGER PRIMARY KEY ON CONFLICT FAIL
  );
  INSERT INTO t1(a,b,c) VALUES(1,2,3), (2,3,4);
  SELECT a,b,c FROM t1 ORDER BY a;
} {1 2 3 2 3 4}

# Insert a row that conflicts on column B.  The insert should be ignored.
#
do_execsql_test 10.2 {
  INSERT INTO t1(a,b,c) VALUES(3,2,5);
  SELECT a,b,c FROM t1 ORDER BY a;
} {1 2 3 2 3 4}

# Insert two rows where the second conflicts on C.  The first row show go
# and and then there should be a constraint error.
#
do_test 10.3 {
  catchsql {INSERT INTO t1(a,b,c) VALUES(4,5,6), (5,6,4);}
} {1 {UNIQUE constraint failed: t1.c}}
do_execsql_test 10.4 {
  SELECT a,b,c FROM t1 ORDER BY a;
} {1 2 3 2 3 4 4 5 6}

# Change which column is the PRIMARY KEY
#
do_execsql_test 11.1 {
  DROP TABLE t1;
  CREATE TABLE t1(
    a UNIQUE ON CONFLICT REPLACE, 
    b UNIQUE ON CONFLICT IGNORE,
    c PRIMARY KEY ON CONFLICT FAIL
  ) WITHOUT ROWID;
  INSERT INTO t1(a,b,c) VALUES(1,2,3), (2,3,4);
  SELECT a,b,c FROM t1 ORDER BY a;
} {1 2 3 2 3 4}

# Insert a row that conflicts on column B.  The insert should be ignored.
#
do_execsql_test 11.2 {
  INSERT INTO t1(a,b,c) VALUES(3,2,5);
  SELECT a,b,c FROM t1 ORDER BY a;
} {1 2 3 2 3 4}

# Insert two rows where the second conflicts on C.  The first row show go
# and and then there should be a constraint error.
#
do_test 11.3 {
  catchsql {INSERT INTO t1(a,b,c) VALUES(4,5,6), (5,6,4);}
} {1 {UNIQUE constraint failed: t1.c}}
do_execsql_test 11.4 {
  SELECT a,b,c FROM t1 ORDER BY a;
} {1 2 3 2 3 4 4 5 6}

# Check that ticket [f68dc596c4] has been fixed.
#
do_execsql_test 12.1 {
  CREATE TABLE t2(a INTEGER PRIMARY KEY, b TEXT);
  INSERT INTO t2 VALUES(111, '111');
}
do_execsql_test 12.2 {
  REPLACE INTO t2 VALUES(NULL, '112'), (111, '111B');
}
do_execsql_test 12.3 {
  SELECT * FROM t2;
} {111 111B 112 112}


finish_test