for(ii=0; ii<NCELL(&node); ii++){
    char zCell[512];
    int nCell = 0;
    RtreeCell cell;
    int jj;

    nodeGetCell(&tree, &node, ii, &cell);
    sqlite3_snprintf(512-nCell,&zCell[nCell],"%d", cell.iRowid);
    nCell = strlen(zCell);
    for(jj=0; jj<tree.nDim*2; jj++){
      sqlite3_snprintf(512-nCell,&zCell[nCell]," %f",(double)cell.aCoord[jj].f);
      nCell = strlen(zCell);
    }

    if( zText ){

  for(ii=0; ii<NCELL(&node); ii++){
    char zCell[512];
    int nCell = 0;
    RtreeCell cell;
    int jj;

    nodeGetCell(&tree, &node, ii, &cell);
    sqlite3_snprintf(512-nCell,&zCell[nCell],"%lld", cell.iRowid);
    nCell = strlen(zCell);
    for(jj=0; jj<tree.nDim*2; jj++){
      sqlite3_snprintf(512-nCell,&zCell[nCell]," %f",(double)cell.aCoord[jj].f);
      nCell = strlen(zCell);
    }

    if( zText ){

# 2011 March 2
#
# The author disclaims copyright to this source code.  In place of
# a legal notice, here is a blessing:
#
#    May you do good and not evil.
#    May you find forgiveness for yourself and forgive others.
#    May you share freely, never taking more than you give.
#
#***********************************************************************
# Make sure the rtreenode() testing function can handle entries with
# 64-bit rowids.
# 

if {![info exists testdir]} {
  set testdir [file join [file dirname [info script]] .. .. test]
} 
source $testdir/tester.tcl
ifcapable !rtree { finish_test ; return }

do_test rtreeB-1.1 {
  db eval {
    CREATE VIRTUAL TABLE t1 USING rtree(ii, x0, y0, x1, y1);
    INSERT INTO t1 VALUES(1073741824, 0.0, 0.0, 100.0, 100.0);
    INSERT INTO t1 VALUES(2147483646, 0.0, 0.0, 200.0, 200.0);
    INSERT INTO t1 VALUES(4294967296, 0.0, 0.0, 300.0, 300.0);
    INSERT INTO t1 VALUES(8589934592, 20.0, 20.0, 150.0, 150.0);
    INSERT INTO t1 VALUES(9223372036854775807, 150, 150, 400, 400);
    SELECT rtreenode(2, data) FROM t1_node;
  }
} {{{1073741824 0.000000 0.000000 100.000000 100.000000} {2147483646 0.000000 0.000000 200.000000 200.000000} {4294967296 0.000000 0.000000 300.000000 300.000000} {8589934592 20.000000 20.000000 150.000000 150.000000} {9223372036854775807 150.000000 150.000000 400.000000 400.000000}}}


finish_test

        if( rc ){
          goto end_allocate_page;
        }
        if( nearby>0 ){
          u32 i;
          int dist;
          closest = 0;
          dist = get4byte(&aData[8]) - nearby;
          if( dist<0 ) dist = -dist;
          for(i=1; i<k; i++){
            int d2 = get4byte(&aData[8+i*4]) - nearby;
            if( d2<0 ) d2 = -d2;
            if( d2<dist ){
              closest = i;
              dist = d2;
            }
          }
        }else{
          closest = 0;
................................................................................
    for(j=i+1; j<k; j++){
      if( apNew[j]->pgno<(unsigned)minV ){
        minI = j;
        minV = apNew[j]->pgno;
      }
    }
    if( minI>i ){
      int t;
      MemPage *pT;
      t = apNew[i]->pgno;
      pT = apNew[i];
      apNew[i] = apNew[minI];
      apNew[minI] = pT;
    }
  }
  TRACE(("new: %d(%d) %d(%d) %d(%d) %d(%d) %d(%d)\n",
    apNew[0]->pgno, szNew[0],

        if( rc ){
          goto end_allocate_page;
        }
        if( nearby>0 ){
          u32 i;
          int dist;
          closest = 0;
          dist = sqlite3AbsInt32(get4byte(&aData[8]) - nearby);

          for(i=1; i<k; i++){
            int d2 = sqlite3AbsInt32(get4byte(&aData[8+i*4]) - nearby);

            if( d2<dist ){
              closest = i;
              dist = d2;
            }
          }
        }else{
          closest = 0;
................................................................................
    for(j=i+1; j<k; j++){
      if( apNew[j]->pgno<(unsigned)minV ){
        minI = j;
        minV = apNew[j]->pgno;
      }
    }
    if( minI>i ){

      MemPage *pT;

      pT = apNew[i];
      apNew[i] = apNew[minI];
      apNew[minI] = pT;
    }
  }
  TRACE(("new: %d(%d) %d(%d) %d(%d) %d(%d) %d(%d)\n",
    apNew[0]->pgno, szNew[0],

  "OMIT_TRACE",
#endif
#ifdef SQLITE_OMIT_TRIGGER
  "OMIT_TRIGGER",
#endif
#ifdef SQLITE_OMIT_TRUNCATE_OPTIMIZATION
  "OMIT_TRUNCATE_OPTIMIZATION",



#endif
#ifdef SQLITE_OMIT_UTF16
  "OMIT_UTF16",
#endif
#ifdef SQLITE_OMIT_VACUUM
  "OMIT_VACUUM",
#endif

  "OMIT_TRACE",
#endif
#ifdef SQLITE_OMIT_TRIGGER
  "OMIT_TRIGGER",
#endif
#ifdef SQLITE_OMIT_TRUNCATE_OPTIMIZATION
  "OMIT_TRUNCATE_OPTIMIZATION",
#endif
#ifdef SQLITE_OMIT_UNIQUE_ENFORCEMENT
  "OMIT_UNIQUE_ENFORCEMENT",
#endif
#ifdef SQLITE_OMIT_UTF16
  "OMIT_UTF16",
#endif
#ifdef SQLITE_OMIT_VACUUM
  "OMIT_VACUUM",
#endif

  int nExtra = 0;
  int iValue = 0;

  if( pToken ){
    if( op!=TK_INTEGER || pToken->z==0
          || sqlite3GetInt32(pToken->z, &iValue)==0 ){
      nExtra = pToken->n+1;

    }
  }
  pNew = sqlite3DbMallocZero(db, sizeof(Expr)+nExtra);
  if( pNew ){
    pNew->op = (u8)op;
    pNew->iAgg = -1;
    if( pToken ){
................................................................................
}

/*
** Recursively delete an expression tree.
*/
void sqlite3ExprDelete(sqlite3 *db, Expr *p){
  if( p==0 ) return;


  if( !ExprHasAnyProperty(p, EP_TokenOnly) ){
    sqlite3ExprDelete(db, p->pLeft);
    sqlite3ExprDelete(db, p->pRight);
    if( !ExprHasProperty(p, EP_Reduced) && (p->flags2 & EP2_MallocedToken)!=0 ){
      sqlite3DbFree(db, p->u.zToken);
    }
    if( ExprHasProperty(p, EP_xIsSelect) ){
................................................................................
        *pValue = -v;
        rc = 1;
      }
      break;
    }
    default: break;
  }
  if( rc ){
    assert( ExprHasAnyProperty(p, EP_Reduced|EP_TokenOnly)
               || (p->flags2 & EP2_MallocedToken)==0 );
    p->op = TK_INTEGER;
    p->flags |= EP_IntValue;
    p->u.iValue = *pValue;
  }
  return rc;
}

/*
** Return FALSE if there is no chance that the expression can be NULL.
**
** If the expression might be NULL or if the expression is too complex
................................................................................
**
** Expr.u.zToken is always UTF8 and zero-terminated.
*/
static void codeInteger(Parse *pParse, Expr *pExpr, int negFlag, int iMem){
  Vdbe *v = pParse->pVdbe;
  if( pExpr->flags & EP_IntValue ){
    int i = pExpr->u.iValue;

    if( negFlag ) i = -i;
    sqlite3VdbeAddOp2(v, OP_Integer, i, iMem);
  }else{
    int c;
    i64 value;
    const char *z = pExpr->u.zToken;
    assert( z!=0 );
    c = sqlite3Atoi64(z, &value, sqlite3Strlen30(z), SQLITE_UTF8);
    if( c==0 || (c==2 && negFlag) ){
      char *zV;
      if( negFlag ){ value = -value; }
      zV = dup8bytes(v, (char*)&value);
      sqlite3VdbeAddOp4(v, OP_Int64, 0, iMem, 0, zV, P4_INT64);
    }else{
#ifdef SQLITE_OMIT_FLOATING_POINT
      sqlite3ErrorMsg(pParse, "oversized integer: %s%s", negFlag ? "-" : "", z);
#else
      codeReal(v, z, negFlag, iMem);

  int nExtra = 0;
  int iValue = 0;

  if( pToken ){
    if( op!=TK_INTEGER || pToken->z==0
          || sqlite3GetInt32(pToken->z, &iValue)==0 ){
      nExtra = pToken->n+1;
      assert( iValue>=0 );
    }
  }
  pNew = sqlite3DbMallocZero(db, sizeof(Expr)+nExtra);
  if( pNew ){
    pNew->op = (u8)op;
    pNew->iAgg = -1;
    if( pToken ){
................................................................................
}

/*
** Recursively delete an expression tree.
*/
void sqlite3ExprDelete(sqlite3 *db, Expr *p){
  if( p==0 ) return;
  /* Sanity check: Assert that the IntValue is non-negative if it exists */
  assert( !ExprHasProperty(p, EP_IntValue) || p->u.iValue>=0 );
  if( !ExprHasAnyProperty(p, EP_TokenOnly) ){
    sqlite3ExprDelete(db, p->pLeft);
    sqlite3ExprDelete(db, p->pRight);
    if( !ExprHasProperty(p, EP_Reduced) && (p->flags2 & EP2_MallocedToken)!=0 ){
      sqlite3DbFree(db, p->u.zToken);
    }
    if( ExprHasProperty(p, EP_xIsSelect) ){
................................................................................
        *pValue = -v;
        rc = 1;
      }
      break;
    }
    default: break;
  }







  return rc;
}

/*
** Return FALSE if there is no chance that the expression can be NULL.
**
** If the expression might be NULL or if the expression is too complex
................................................................................
**
** Expr.u.zToken is always UTF8 and zero-terminated.
*/
static void codeInteger(Parse *pParse, Expr *pExpr, int negFlag, int iMem){
  Vdbe *v = pParse->pVdbe;
  if( pExpr->flags & EP_IntValue ){
    int i = pExpr->u.iValue;
    assert( i>=0 );
    if( negFlag ) i = -i;
    sqlite3VdbeAddOp2(v, OP_Integer, i, iMem);
  }else{
    int c;
    i64 value;
    const char *z = pExpr->u.zToken;
    assert( z!=0 );
    c = sqlite3Atoi64(z, &value, sqlite3Strlen30(z), SQLITE_UTF8);
    if( c==0 || (c==2 && negFlag) ){
      char *zV;
      if( negFlag ){ value = c==2 ? SMALLEST_INT64 : -value; }
      zV = dup8bytes(v, (char*)&value);
      sqlite3VdbeAddOp4(v, OP_Int64, 0, iMem, 0, zV, P4_INT64);
    }else{
#ifdef SQLITE_OMIT_FLOATING_POINT
      sqlite3ErrorMsg(pParse, "oversized integer: %s%s", negFlag ? "-" : "", z);
#else
      codeReal(v, z, negFlag, iMem);

void sqlite3FkCheck(
  Parse *pParse,                  /* Parse context */
  Table *pTab,                    /* Row is being deleted from this table */ 
  int regOld,                     /* Previous row data is stored here */
  int regNew                      /* New row data is stored here */
){
  sqlite3 *db = pParse->db;       /* Database handle */
  Vdbe *v;                        /* VM to write code to */
  FKey *pFKey;                    /* Used to iterate through FKs */
  int iDb;                        /* Index of database containing pTab */
  const char *zDb;                /* Name of database containing pTab */
  int isIgnoreErrors = pParse->disableTriggers;

  /* Exactly one of regOld and regNew should be non-zero. */
  assert( (regOld==0)!=(regNew==0) );

  /* If foreign-keys are disabled, this function is a no-op. */
  if( (db->flags&SQLITE_ForeignKeys)==0 ) return;

  v = sqlite3GetVdbe(pParse);
  iDb = sqlite3SchemaToIndex(db, pTab->pSchema);
  zDb = db->aDb[iDb].zName;

  /* Loop through all the foreign key constraints for which pTab is the
  ** child table (the table that the foreign key definition is part of).  */
  for(pFKey=pTab->pFKey; pFKey; pFKey=pFKey->pNextFrom){
    Table *pTo;                   /* Parent table of foreign key pFKey */

void sqlite3FkCheck(
  Parse *pParse,                  /* Parse context */
  Table *pTab,                    /* Row is being deleted from this table */ 
  int regOld,                     /* Previous row data is stored here */
  int regNew                      /* New row data is stored here */
){
  sqlite3 *db = pParse->db;       /* Database handle */

  FKey *pFKey;                    /* Used to iterate through FKs */
  int iDb;                        /* Index of database containing pTab */
  const char *zDb;                /* Name of database containing pTab */
  int isIgnoreErrors = pParse->disableTriggers;

  /* Exactly one of regOld and regNew should be non-zero. */
  assert( (regOld==0)!=(regNew==0) );

  /* If foreign-keys are disabled, this function is a no-op. */
  if( (db->flags&SQLITE_ForeignKeys)==0 ) return;


  iDb = sqlite3SchemaToIndex(db, pTab->pSchema);
  zDb = db->aDb[iDb].zName;

  /* Loop through all the foreign key constraints for which pTab is the
  ** child table (the table that the foreign key definition is part of).  */
  for(pFKey=pTab->pFKey; pFKey; pFKey=pFKey->pNextFrom){
    Table *pTo;                   /* Parent table of foreign key pFKey */

  p = sqlite3_aggregate_context(context, sizeof(*p));
  type = sqlite3_value_numeric_type(argv[0]);
  if( p && type!=SQLITE_NULL ){
    p->cnt++;
    if( type==SQLITE_INTEGER ){
      i64 v = sqlite3_value_int64(argv[0]);
      p->rSum += v;
      if( (p->approx|p->overflow)==0 ){
        i64 iNewSum = p->iSum + v;
        int s1 = (int)(p->iSum >> (sizeof(i64)*8-1));
        int s2 = (int)(v       >> (sizeof(i64)*8-1));
        int s3 = (int)(iNewSum >> (sizeof(i64)*8-1));
        p->overflow = ((s1&s2&~s3) | (~s1&~s2&s3))?1:0;
        p->iSum = iNewSum;
      }
    }else{
      p->rSum += sqlite3_value_double(argv[0]);
      p->approx = 1;
    }
  }
}

  p = sqlite3_aggregate_context(context, sizeof(*p));
  type = sqlite3_value_numeric_type(argv[0]);
  if( p && type!=SQLITE_NULL ){
    p->cnt++;
    if( type==SQLITE_INTEGER ){
      i64 v = sqlite3_value_int64(argv[0]);
      p->rSum += v;
      if( (p->approx|p->overflow)==0 && sqlite3AddInt64(&p->iSum, v) ){




        p->overflow = 1;

      }
    }else{
      p->rSum += sqlite3_value_double(argv[0]);
      p->approx = 1;
    }
  }
}

  /* Register allocations */
  int regFromSelect = 0;/* Base register for data coming from SELECT */
  int regAutoinc = 0;   /* Register holding the AUTOINCREMENT counter */
  int regRowCount = 0;  /* Memory cell used for the row counter */
  int regIns;           /* Block of regs holding rowid+data being inserted */
  int regRowid;         /* registers holding insert rowid */
  int regData;          /* register holding first column to insert */
  int regRecord;        /* Holds the assemblied row record */
  int regEof = 0;       /* Register recording end of SELECT data */
  int *aRegIdx = 0;     /* One register allocated to each index */

#ifndef SQLITE_OMIT_TRIGGER
  int isView;                 /* True if attempting to insert into a view */
  Trigger *pTrigger;          /* List of triggers on pTab, if required */
  int tmask;                  /* Mask of trigger times */
................................................................................
    addrCont = sqlite3VdbeAddOp1(v, OP_Yield, dest.iParm);
    addrInsTop = sqlite3VdbeAddOp1(v, OP_If, regEof);
  }

  /* Allocate registers for holding the rowid of the new row,
  ** the content of the new row, and the assemblied row record.
  */
  regRecord = ++pParse->nMem;
  regRowid = regIns = pParse->nMem+1;
  pParse->nMem += pTab->nCol + 1;
  if( IsVirtual(pTab) ){
    regRowid++;
    pParse->nMem++;
  }
  regData = regRowid+1;
................................................................................
        || onError==OE_Ignore || onError==OE_Replace );
    switch( onError ){
      case OE_Abort:
        sqlite3MayAbort(pParse);
      case OE_Rollback:
      case OE_Fail: {
        char *zMsg;
        j1 = sqlite3VdbeAddOp3(v, OP_HaltIfNull,
                                  SQLITE_CONSTRAINT, onError, regData+i);
        zMsg = sqlite3MPrintf(pParse->db, "%s.%s may not be NULL",
                              pTab->zName, pTab->aCol[i].zName);
        sqlite3VdbeChangeP4(v, -1, zMsg, P4_DYNAMIC);
        break;
      }
      case OE_Ignore: {
................................................................................

  /* Test all UNIQUE constraints by creating entries for each UNIQUE
  ** index and making sure that duplicate entries do not already exist.
  ** Add the new records to the indices as we go.
  */
  for(iCur=0, pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext, iCur++){
    int regIdx;

    int regR;


    if( aRegIdx[iCur]==0 ) continue;  /* Skip unused indices */

    /* Create a key for accessing the index entry */
    regIdx = sqlite3GetTempRange(pParse, pIdx->nColumn+1);
    for(i=0; i<pIdx->nColumn; i++){
      int idx = pIdx->aiColumn[i];
      if( idx==pTab->iPKey ){
................................................................................
        sqlite3VdbeAddOp2(v, OP_SCopy, regData+idx, regIdx+i);
      }
    }
    sqlite3VdbeAddOp2(v, OP_SCopy, regRowid, regIdx+i);
    sqlite3VdbeAddOp3(v, OP_MakeRecord, regIdx, pIdx->nColumn+1, aRegIdx[iCur]);
    sqlite3VdbeChangeP4(v, -1, sqlite3IndexAffinityStr(v, pIdx), 0);
    sqlite3ExprCacheAffinityChange(pParse, regIdx, pIdx->nColumn+1);






    /* Find out what action to take in case there is an indexing conflict */
    onError = pIdx->onError;
    if( onError==OE_None ){ 
      sqlite3ReleaseTempRange(pParse, regIdx, pIdx->nColumn+1);
      continue;  /* pIdx is not a UNIQUE index */
    }
................................................................................
        );
        seenReplace = 1;
        break;
      }
    }
    sqlite3VdbeJumpHere(v, j3);
    sqlite3ReleaseTempReg(pParse, regR);

  }
  
  if( pbMayReplace ){
    *pbMayReplace = seenReplace;
  }
}

  /* Register allocations */
  int regFromSelect = 0;/* Base register for data coming from SELECT */
  int regAutoinc = 0;   /* Register holding the AUTOINCREMENT counter */
  int regRowCount = 0;  /* Memory cell used for the row counter */
  int regIns;           /* Block of regs holding rowid+data being inserted */
  int regRowid;         /* registers holding insert rowid */
  int regData;          /* register holding first column to insert */

  int regEof = 0;       /* Register recording end of SELECT data */
  int *aRegIdx = 0;     /* One register allocated to each index */

#ifndef SQLITE_OMIT_TRIGGER
  int isView;                 /* True if attempting to insert into a view */
  Trigger *pTrigger;          /* List of triggers on pTab, if required */
  int tmask;                  /* Mask of trigger times */
................................................................................
    addrCont = sqlite3VdbeAddOp1(v, OP_Yield, dest.iParm);
    addrInsTop = sqlite3VdbeAddOp1(v, OP_If, regEof);
  }

  /* Allocate registers for holding the rowid of the new row,
  ** the content of the new row, and the assemblied row record.
  */

  regRowid = regIns = pParse->nMem+1;
  pParse->nMem += pTab->nCol + 1;
  if( IsVirtual(pTab) ){
    regRowid++;
    pParse->nMem++;
  }
  regData = regRowid+1;
................................................................................
        || onError==OE_Ignore || onError==OE_Replace );
    switch( onError ){
      case OE_Abort:
        sqlite3MayAbort(pParse);
      case OE_Rollback:
      case OE_Fail: {
        char *zMsg;
        sqlite3VdbeAddOp3(v, OP_HaltIfNull,
                                  SQLITE_CONSTRAINT, onError, regData+i);
        zMsg = sqlite3MPrintf(pParse->db, "%s.%s may not be NULL",
                              pTab->zName, pTab->aCol[i].zName);
        sqlite3VdbeChangeP4(v, -1, zMsg, P4_DYNAMIC);
        break;
      }
      case OE_Ignore: {
................................................................................

  /* Test all UNIQUE constraints by creating entries for each UNIQUE
  ** index and making sure that duplicate entries do not already exist.
  ** Add the new records to the indices as we go.
  */
  for(iCur=0, pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext, iCur++){
    int regIdx;
#ifndef SQLITE_OMIT_UNIQUE_ENFORCEMENT
    int regR;

#endif
    if( aRegIdx[iCur]==0 ) continue;  /* Skip unused indices */

    /* Create a key for accessing the index entry */
    regIdx = sqlite3GetTempRange(pParse, pIdx->nColumn+1);
    for(i=0; i<pIdx->nColumn; i++){
      int idx = pIdx->aiColumn[i];
      if( idx==pTab->iPKey ){
................................................................................
        sqlite3VdbeAddOp2(v, OP_SCopy, regData+idx, regIdx+i);
      }
    }
    sqlite3VdbeAddOp2(v, OP_SCopy, regRowid, regIdx+i);
    sqlite3VdbeAddOp3(v, OP_MakeRecord, regIdx, pIdx->nColumn+1, aRegIdx[iCur]);
    sqlite3VdbeChangeP4(v, -1, sqlite3IndexAffinityStr(v, pIdx), 0);
    sqlite3ExprCacheAffinityChange(pParse, regIdx, pIdx->nColumn+1);

#ifdef SQLITE_OMIT_UNIQUE_ENFORCEMENT
    sqlite3ReleaseTempRange(pParse, regIdx, pIdx->nColumn+1);
    continue;  /* Treat pIdx as if it is not a UNIQUE index */
#else

    /* Find out what action to take in case there is an indexing conflict */
    onError = pIdx->onError;
    if( onError==OE_None ){ 
      sqlite3ReleaseTempRange(pParse, regIdx, pIdx->nColumn+1);
      continue;  /* pIdx is not a UNIQUE index */
    }
................................................................................
        );
        seenReplace = 1;
        break;
      }
    }
    sqlite3VdbeJumpHere(v, j3);
    sqlite3ReleaseTempReg(pParse, regR);
#endif
  }
  
  if( pbMayReplace ){
    *pbMayReplace = seenReplace;
  }
}

#if defined(SQLITE_ENABLE_MEMSYS3) || defined(SQLITE_ENABLE_MEMSYS5)
    case SQLITE_CONFIG_HEAP: {
      /* Designate a buffer for heap memory space */
      sqlite3GlobalConfig.pHeap = va_arg(ap, void*);
      sqlite3GlobalConfig.nHeap = va_arg(ap, int);
      sqlite3GlobalConfig.mnReq = va_arg(ap, int);








      if( sqlite3GlobalConfig.pHeap==0 ){
        /* If the heap pointer is NULL, then restore the malloc implementation
        ** back to NULL pointers too.  This will cause the malloc to go
        ** back to its default implementation when sqlite3_initialize() is
        ** run.
        */

#if defined(SQLITE_ENABLE_MEMSYS3) || defined(SQLITE_ENABLE_MEMSYS5)
    case SQLITE_CONFIG_HEAP: {
      /* Designate a buffer for heap memory space */
      sqlite3GlobalConfig.pHeap = va_arg(ap, void*);
      sqlite3GlobalConfig.nHeap = va_arg(ap, int);
      sqlite3GlobalConfig.mnReq = va_arg(ap, int);

      if( sqlite3GlobalConfig.mnReq<1 ){
        sqlite3GlobalConfig.mnReq = 1;
      }else if( sqlite3GlobalConfig.mnReq>(1<<12) ){
        /* cap min request size at 2^12 */
        sqlite3GlobalConfig.mnReq = (1<<12);
      }

      if( sqlite3GlobalConfig.pHeap==0 ){
        /* If the heap pointer is NULL, then restore the malloc implementation
        ** back to NULL pointers too.  This will cause the malloc to go
        ** back to its default implementation when sqlite3_initialize() is
        ** run.
        */

**             memsys5Log(4) -> 2
**             memsys5Log(5) -> 3
**             memsys5Log(8) -> 3
**             memsys5Log(9) -> 4
*/
static int memsys5Log(int iValue){
  int iLog;
  for(iLog=0; (1<<iLog)<iValue; iLog++);
  return iLog;
}

/*
** Initialize the memory allocator.
**
** This routine is not threadsafe.  The caller must be holding a mutex
................................................................................
  */
  assert( (sizeof(Mem5Link)&(sizeof(Mem5Link)-1))==0 );

  nByte = sqlite3GlobalConfig.nHeap;
  zByte = (u8*)sqlite3GlobalConfig.pHeap;
  assert( zByte!=0 );  /* sqlite3_config() does not allow otherwise */


  nMinLog = memsys5Log(sqlite3GlobalConfig.mnReq);
  mem5.szAtom = (1<<nMinLog);
  while( (int)sizeof(Mem5Link)>mem5.szAtom ){
    mem5.szAtom = mem5.szAtom << 1;
  }

  mem5.nBlock = (nByte / (mem5.szAtom+sizeof(u8)));

**             memsys5Log(4) -> 2
**             memsys5Log(5) -> 3
**             memsys5Log(8) -> 3
**             memsys5Log(9) -> 4
*/
static int memsys5Log(int iValue){
  int iLog;
  for(iLog=0; (iLog<((sizeof(int)*8)-1)) && (1<<iLog)<iValue; iLog++);
  return iLog;
}

/*
** Initialize the memory allocator.
**
** This routine is not threadsafe.  The caller must be holding a mutex
................................................................................
  */
  assert( (sizeof(Mem5Link)&(sizeof(Mem5Link)-1))==0 );

  nByte = sqlite3GlobalConfig.nHeap;
  zByte = (u8*)sqlite3GlobalConfig.pHeap;
  assert( zByte!=0 );  /* sqlite3_config() does not allow otherwise */

  /* boundaries on sqlite3GlobalConfig.mnReq are enforced in sqlite3_config() */
  nMinLog = memsys5Log(sqlite3GlobalConfig.mnReq);
  mem5.szAtom = (1<<nMinLog);
  while( (int)sizeof(Mem5Link)>mem5.szAtom ){
    mem5.szAtom = mem5.szAtom << 1;
  }

  mem5.nBlock = (nByte / (mem5.szAtom+sizeof(u8)));

/*
** The mutex object
** Each recursive mutex is an instance of the following structure.
*/
struct sqlite3_mutex {
  HMTX mutex;       /* Mutex controlling the lock */
  int  id;          /* Mutex type */
  int  nRef;        /* Number of references */
  TID  owner;       /* Thread holding this mutex */

};




#define OS2_MUTEX_INITIALIZER   0,0,0,0


/*
** Initialize and deinitialize the mutex subsystem.
*/
static int os2MutexInit(void){ return SQLITE_OK; }
static int os2MutexEnd(void){ return SQLITE_OK; }

................................................................................
** The sqlite3_mutex_alloc() routine allocates a new
** mutex and returns a pointer to it.  If it returns NULL
** that means that a mutex could not be allocated. 
** SQLite will unwind its stack and return an error.  The argument
** to sqlite3_mutex_alloc() is one of these integer constants:
**
** <ul>
** <li>  SQLITE_MUTEX_FAST               0
** <li>  SQLITE_MUTEX_RECURSIVE          1
** <li>  SQLITE_MUTEX_STATIC_MASTER      2
** <li>  SQLITE_MUTEX_STATIC_MEM         3

** <li>  SQLITE_MUTEX_STATIC_PRNG        4


** </ul>
**
** The first two constants cause sqlite3_mutex_alloc() to create
** a new mutex.  The new mutex is recursive when SQLITE_MUTEX_RECURSIVE
** is used but not necessarily so when SQLITE_MUTEX_FAST is used.
** The mutex implementation does not need to make a distinction
** between SQLITE_MUTEX_RECURSIVE and SQLITE_MUTEX_FAST if it does
** not want to.  But SQLite will only request a recursive mutex in
** cases where it really needs one.  If a faster non-recursive mutex
** implementation is available on the host platform, the mutex subsystem
** might return such a mutex in response to SQLITE_MUTEX_FAST.
**
** The other allowed parameters to sqlite3_mutex_alloc() each return
** a pointer to a static preexisting mutex.  Three static mutexes are
** used by the current version of SQLite.  Future versions of SQLite
** may add additional static mutexes.  Static mutexes are for internal
** use by SQLite only.  Applications that use SQLite mutexes should
** use only the dynamic mutexes returned by SQLITE_MUTEX_FAST or
** SQLITE_MUTEX_RECURSIVE.
**
** Note that if one of the dynamic mutex parameters (SQLITE_MUTEX_FAST
................................................................................
          p = NULL;
        }
      }
      break;
    }
    default: {
      static volatile int isInit = 0;
      static sqlite3_mutex staticMutexes[] = {
        { OS2_MUTEX_INITIALIZER, },
        { OS2_MUTEX_INITIALIZER, },
        { OS2_MUTEX_INITIALIZER, },
        { OS2_MUTEX_INITIALIZER, },
        { OS2_MUTEX_INITIALIZER, },
        { OS2_MUTEX_INITIALIZER, },
      };
      if ( !isInit ){
        APIRET rc;
        PTIB ptib;
        PPIB ppib;
        HMTX mutex;
        char name[32];
................................................................................


/*
** This routine deallocates a previously allocated mutex.
** SQLite is careful to deallocate every mutex that it allocates.
*/
static void os2MutexFree(sqlite3_mutex *p){
  if( p==0 ) return;




  assert( p->nRef==0 );
  assert( p->id==SQLITE_MUTEX_FAST || p->id==SQLITE_MUTEX_RECURSIVE );

  DosCloseMutexSem( p->mutex );
  sqlite3_free( p );
}

#ifdef SQLITE_DEBUG
/*
** The sqlite3_mutex_held() and sqlite3_mutex_notheld() routine are
................................................................................
** intended for use inside assert() statements.
*/
static int os2MutexHeld(sqlite3_mutex *p){
  TID tid;
  PID pid;
  ULONG ulCount;
  PTIB ptib;
  if( p!=0 ) {
    DosQueryMutexSem(p->mutex, &pid, &tid, &ulCount);

  } else {
    DosGetInfoBlocks(&ptib, NULL);
    tid = ptib->tib_ptib2->tib2_ultid;
  }
  return p==0 || (p->nRef!=0 && p->owner==tid);
}
static int os2MutexNotheld(sqlite3_mutex *p){
  TID tid;
  PID pid;
  ULONG ulCount;
  PTIB ptib;
  if( p!= 0 ) {
    DosQueryMutexSem(p->mutex, &pid, &tid, &ulCount);

  } else {
    DosGetInfoBlocks(&ptib, NULL);
    tid = ptib->tib_ptib2->tib2_ultid;
  }
  return p==0 || p->nRef==0 || p->owner!=tid;





}
#endif

/*
** The sqlite3_mutex_enter() and sqlite3_mutex_try() routines attempt
** to enter a mutex.  If another thread is already within the mutex,
** sqlite3_mutex_enter() will block and sqlite3_mutex_try() will return
................................................................................
** upon successful entry.  Mutexes created using SQLITE_MUTEX_RECURSIVE can
** be entered multiple times by the same thread.  In such cases the,
** mutex must be exited an equal number of times before another thread
** can enter.  If the same thread tries to enter any other kind of mutex
** more than once, the behavior is undefined.
*/
static void os2MutexEnter(sqlite3_mutex *p){
  TID tid;
  PID holder1;
  ULONG holder2;
  if( p==0 ) return;
  assert( p->id==SQLITE_MUTEX_RECURSIVE || os2MutexNotheld(p) );
  DosRequestMutexSem(p->mutex, SEM_INDEFINITE_WAIT);
  DosQueryMutexSem(p->mutex, &holder1, &tid, &holder2);
  p->owner = tid;
  p->nRef++;



}
static int os2MutexTry(sqlite3_mutex *p){
  int rc;
  TID tid;
  PID holder1;
  ULONG holder2;
  if( p==0 ) return SQLITE_OK;
  assert( p->id==SQLITE_MUTEX_RECURSIVE || os2MutexNotheld(p) );
  if( DosRequestMutexSem(p->mutex, SEM_IMMEDIATE_RETURN) == NO_ERROR) {
    DosQueryMutexSem(p->mutex, &holder1, &tid, &holder2);
    p->owner = tid;
    p->nRef++;
    rc = SQLITE_OK;
  } else {
    rc = SQLITE_BUSY;


  }

  return rc;
}

/*
** The sqlite3_mutex_leave() routine exits a mutex that was
** previously entered by the same thread.  The behavior
** is undefined if the mutex is not currently entered or
** is not currently allocated.  SQLite will never do either.
*/
static void os2MutexLeave(sqlite3_mutex *p){
  TID tid;
  PID holder1;
  ULONG holder2;
  if( p==0 ) return;
  assert( p->nRef>0 );
  DosQueryMutexSem(p->mutex, &holder1, &tid, &holder2);
  assert( p->owner==tid );
  p->nRef--;
  assert( p->nRef==0 || p->id==SQLITE_MUTEX_RECURSIVE );
  DosReleaseMutexSem(p->mutex);



}

sqlite3_mutex_methods const *sqlite3DefaultMutex(void){
  static const sqlite3_mutex_methods sMutex = {
    os2MutexInit,
    os2MutexEnd,
    os2MutexAlloc,
    os2MutexFree,
    os2MutexEnter,
    os2MutexTry,
    os2MutexLeave,
#ifdef SQLITE_DEBUG
    os2MutexHeld,
    os2MutexNotheld



#endif
  };

  return &sMutex;
}
#endif /* SQLITE_MUTEX_OS2 */

/*
** The mutex object
** Each recursive mutex is an instance of the following structure.
*/
struct sqlite3_mutex {
  HMTX mutex;       /* Mutex controlling the lock */
  int  id;          /* Mutex type */
#ifdef SQLITE_DEBUG
 int   trace;       /* True to trace changes */
#endif
};

#ifdef SQLITE_DEBUG
#define SQLITE3_MUTEX_INITIALIZER { 0, 0, 0 }
#else
#define SQLITE3_MUTEX_INITIALIZER { 0, 0 }
#endif

/*
** Initialize and deinitialize the mutex subsystem.
*/
static int os2MutexInit(void){ return SQLITE_OK; }
static int os2MutexEnd(void){ return SQLITE_OK; }

................................................................................
** The sqlite3_mutex_alloc() routine allocates a new
** mutex and returns a pointer to it.  If it returns NULL
** that means that a mutex could not be allocated. 
** SQLite will unwind its stack and return an error.  The argument
** to sqlite3_mutex_alloc() is one of these integer constants:
**
** <ul>
** <li>  SQLITE_MUTEX_FAST
** <li>  SQLITE_MUTEX_RECURSIVE
** <li>  SQLITE_MUTEX_STATIC_MASTER
** <li>  SQLITE_MUTEX_STATIC_MEM
** <li>  SQLITE_MUTEX_STATIC_MEM2
** <li>  SQLITE_MUTEX_STATIC_PRNG
** <li>  SQLITE_MUTEX_STATIC_LRU
** <li>  SQLITE_MUTEX_STATIC_LRU2
** </ul>
**
** The first two constants cause sqlite3_mutex_alloc() to create
** a new mutex.  The new mutex is recursive when SQLITE_MUTEX_RECURSIVE
** is used but not necessarily so when SQLITE_MUTEX_FAST is used.
** The mutex implementation does not need to make a distinction
** between SQLITE_MUTEX_RECURSIVE and SQLITE_MUTEX_FAST if it does
** not want to.  But SQLite will only request a recursive mutex in
** cases where it really needs one.  If a faster non-recursive mutex
** implementation is available on the host platform, the mutex subsystem
** might return such a mutex in response to SQLITE_MUTEX_FAST.
**
** The other allowed parameters to sqlite3_mutex_alloc() each return
** a pointer to a static preexisting mutex.  Six static mutexes are
** used by the current version of SQLite.  Future versions of SQLite
** may add additional static mutexes.  Static mutexes are for internal
** use by SQLite only.  Applications that use SQLite mutexes should
** use only the dynamic mutexes returned by SQLITE_MUTEX_FAST or
** SQLITE_MUTEX_RECURSIVE.
**
** Note that if one of the dynamic mutex parameters (SQLITE_MUTEX_FAST
................................................................................
          p = NULL;
        }
      }
      break;
    }
    default: {
      static volatile int isInit = 0;
      static sqlite3_mutex staticMutexes[6] = {
        SQLITE3_MUTEX_INITIALIZER,
        SQLITE3_MUTEX_INITIALIZER,
        SQLITE3_MUTEX_INITIALIZER,
        SQLITE3_MUTEX_INITIALIZER,
        SQLITE3_MUTEX_INITIALIZER,
        SQLITE3_MUTEX_INITIALIZER,
      };
      if ( !isInit ){
        APIRET rc;
        PTIB ptib;
        PPIB ppib;
        HMTX mutex;
        char name[32];
................................................................................


/*
** This routine deallocates a previously allocated mutex.
** SQLite is careful to deallocate every mutex that it allocates.
*/
static void os2MutexFree(sqlite3_mutex *p){
#ifdef SQLITE_DEBUG
  TID tid;
  PID pid;
  ULONG ulCount;
  DosQueryMutexSem(p->mutex, &pid, &tid, &ulCount);
  assert( ulCount==0 );
  assert( p->id==SQLITE_MUTEX_FAST || p->id==SQLITE_MUTEX_RECURSIVE );
#endif
  DosCloseMutexSem( p->mutex );
  sqlite3_free( p );
}

#ifdef SQLITE_DEBUG
/*
** The sqlite3_mutex_held() and sqlite3_mutex_notheld() routine are
................................................................................
** intended for use inside assert() statements.
*/
static int os2MutexHeld(sqlite3_mutex *p){
  TID tid;
  PID pid;
  ULONG ulCount;
  PTIB ptib;

  DosQueryMutexSem(p->mutex, &pid, &tid, &ulCount);
  if( ulCount==0 || ( ulCount>1 && p->id!=SQLITE_MUTEX_RECURSIVE ) )
    return 0;
  DosGetInfoBlocks(&ptib, NULL);
  return tid==ptib->tib_ptib2->tib2_ultid;


}
static int os2MutexNotheld(sqlite3_mutex *p){
  TID tid;
  PID pid;
  ULONG ulCount;
  PTIB ptib;

  DosQueryMutexSem(p->mutex, &pid, &tid, &ulCount);
  if( ulCount==0 )
    return 1;
  DosGetInfoBlocks(&ptib, NULL);
  return tid!=ptib->tib_ptib2->tib2_ultid;
}
static void os2MutexTrace(sqlite3_mutex *p, char *pAction){
  TID   tid;
  PID   pid;
  ULONG ulCount;
  DosQueryMutexSem(p->mutex, &pid, &tid, &ulCount);
  printf("%s mutex %p (%d) with nRef=%ld\n", pAction, (void*)p, p->trace, ulCount);
}
#endif

/*
** The sqlite3_mutex_enter() and sqlite3_mutex_try() routines attempt
** to enter a mutex.  If another thread is already within the mutex,
** sqlite3_mutex_enter() will block and sqlite3_mutex_try() will return
................................................................................
** upon successful entry.  Mutexes created using SQLITE_MUTEX_RECURSIVE can
** be entered multiple times by the same thread.  In such cases the,
** mutex must be exited an equal number of times before another thread
** can enter.  If the same thread tries to enter any other kind of mutex
** more than once, the behavior is undefined.
*/
static void os2MutexEnter(sqlite3_mutex *p){




  assert( p->id==SQLITE_MUTEX_RECURSIVE || os2MutexNotheld(p) );
  DosRequestMutexSem(p->mutex, SEM_INDEFINITE_WAIT);



#ifdef SQLITE_DEBUG
  if( p->trace ) os2MutexTrace(p, "enter");
#endif
}
static int os2MutexTry(sqlite3_mutex *p){
  int rc = SQLITE_BUSY;




  assert( p->id==SQLITE_MUTEX_RECURSIVE || os2MutexNotheld(p) );
  if( DosRequestMutexSem(p->mutex, SEM_IMMEDIATE_RETURN) == NO_ERROR ) {



    rc = SQLITE_OK;

#ifdef SQLITE_DEBUG
    if( p->trace ) os2MutexTrace(p, "try");
#endif
  }

  return rc;
}

/*
** The sqlite3_mutex_leave() routine exits a mutex that was
** previously entered by the same thread.  The behavior
** is undefined if the mutex is not currently entered or
** is not currently allocated.  SQLite will never do either.
*/
static void os2MutexLeave(sqlite3_mutex *p){
  assert( os2MutexHeld(p) );








  DosReleaseMutexSem(p->mutex);
#ifdef SQLITE_DEBUG
  if( p->trace ) os2MutexTrace(p, "leave");
#endif
}

SQLITE_PRIVATE sqlite3_mutex_methods const *sqlite3DefaultMutex(void){
  static const sqlite3_mutex_methods sMutex = {
    os2MutexInit,
    os2MutexEnd,
    os2MutexAlloc,
    os2MutexFree,
    os2MutexEnter,
    os2MutexTry,
    os2MutexLeave,
#ifdef SQLITE_DEBUG
    os2MutexHeld,
    os2MutexNotheld
#else
    0,
    0
#endif
  };

  return &sMutex;
}
#endif /* SQLITE_MUTEX_OS2 */

    rc = SQLITE_OK;
  }
#else
  UNUSED_PARAMETER(p);
#endif
#ifdef SQLITE_DEBUG
  if( rc==SQLITE_OK && p->trace ){
    printf("enter mutex %p (%d) with nRef=%d\n", p, p->trace, p->nRef);
  }
#endif
  return rc;
}

/*
** The sqlite3_mutex_leave() routine exits a mutex that was

    rc = SQLITE_OK;
  }
#else
  UNUSED_PARAMETER(p);
#endif
#ifdef SQLITE_DEBUG
  if( rc==SQLITE_OK && p->trace ){
    printf("try mutex %p (%d) with nRef=%d\n", p, p->trace, p->nRef);
  }
#endif
  return rc;
}

/*
** The sqlite3_mutex_leave() routine exits a mutex that was

}

/*
** This vector defines all the methods that can operate on an
** sqlite3_file for os2.
*/
static const sqlite3_io_methods os2IoMethod = {
  1,                        /* iVersion */
  os2Close,
  os2Read,
  os2Write,
  os2Truncate,
  os2Sync,
  os2FileSize,
  os2Lock,
  os2Unlock,
  os2CheckReservedLock,
  os2FileControl,
  os2SectorSize,
  os2DeviceCharacteristics




};

/***************************************************************************
** Here ends the I/O methods that form the sqlite3_io_methods object.
**
** The next block of code implements the VFS methods.
****************************************************************************/
................................................................................


/*
** Open a file.
*/
static int os2Open(
  sqlite3_vfs *pVfs,            /* Not used */
  const char *zName,            /* Name of the file */
  sqlite3_file *id,             /* Write the SQLite file handle here */
  int flags,                    /* Open mode flags */
  int *pOutFlags                /* Status return flags */
){
  HFILE h;
  ULONG ulFileAttribute = FILE_NORMAL;
  ULONG ulOpenFlags = 0;
  ULONG ulOpenMode = 0;


  os2File *pFile = (os2File*)id;
  APIRET rc = NO_ERROR;
  ULONG ulAction;
  char *zNameCp;
  char zTmpname[CCHMAXPATH+1];    /* Buffer to hold name of temp file */















































  /* If the second argument to this function is NULL, generate a 
  ** temporary file name to use 
  */
  if( !zName ){

    int rc = getTempname(CCHMAXPATH+1, zTmpname);
    if( rc!=SQLITE_OK ){
      return rc;
    }
    zName = zTmpname;
  }


  memset( pFile, 0, sizeof(*pFile) );

  OSTRACE(( "OPEN want %d\n", flags ));

  if( flags & SQLITE_OPEN_READWRITE ){

    ulOpenMode |= OPEN_ACCESS_READWRITE;
    OSTRACE(( "OPEN read/write\n" ));
  }else{
    ulOpenMode |= OPEN_ACCESS_READONLY;
    OSTRACE(( "OPEN read only\n" ));
  }

  if( flags & SQLITE_OPEN_CREATE ){
    ulOpenFlags |= OPEN_ACTION_OPEN_IF_EXISTS | OPEN_ACTION_CREATE_IF_NEW;
    OSTRACE(( "OPEN open new/create\n" ));
  }else{
    ulOpenFlags |= OPEN_ACTION_OPEN_IF_EXISTS | OPEN_ACTION_FAIL_IF_NEW;
    OSTRACE(( "OPEN open existing\n" ));







  }








  if( flags & SQLITE_OPEN_MAIN_DB ){
    ulOpenMode |= OPEN_SHARE_DENYNONE;
    OSTRACE(( "OPEN share read/write\n" ));

  }else{
    ulOpenMode |= OPEN_SHARE_DENYWRITE;
    OSTRACE(( "OPEN share read only\n" ));

  }

  if( flags & SQLITE_OPEN_DELETEONCLOSE ){


    char pathUtf8[CCHMAXPATH];
#ifdef NDEBUG /* when debugging we want to make sure it is deleted */
    ulFileAttribute = FILE_HIDDEN;
#endif
    os2FullPathname( pVfs, zName, CCHMAXPATH, pathUtf8 );
    pFile->pathToDel = convertUtf8PathToCp( pathUtf8 );
    OSTRACE(( "OPEN hidden/delete on close file attributes\n" ));
  }else{
    pFile->pathToDel = NULL;
    OSTRACE(( "OPEN normal file attribute\n" ));
  }

  /* always open in random access mode for possibly better speed */
  ulOpenMode |= OPEN_FLAGS_RANDOM;
  ulOpenMode |= OPEN_FLAGS_FAIL_ON_ERROR;
  ulOpenMode |= OPEN_FLAGS_NOINHERIT;

  zNameCp = convertUtf8PathToCp( zName );
  rc = DosOpen( (PSZ)zNameCp,
                &h,
                &ulAction,
                0L,
                ulFileAttribute,
                ulOpenFlags,
                ulOpenMode,
                (PEAOP2)NULL );
  free( zNameCp );

  if( rc != NO_ERROR ){
    OSTRACE(( "OPEN Invalid handle rc=%d: zName=%s, ulAction=%#lx, ulAttr=%#lx, ulFlags=%#lx, ulMode=%#lx\n",
              rc, zName, ulAction, ulFileAttribute, ulOpenFlags, ulOpenMode ));
    if( pFile->pathToDel )
      free( pFile->pathToDel );
    pFile->pathToDel = NULL;
    if( flags & SQLITE_OPEN_READWRITE ){

      OSTRACE(( "OPEN %d Invalid handle\n",
                ((flags | SQLITE_OPEN_READONLY) & ~SQLITE_OPEN_READWRITE) ));
      return os2Open( pVfs, zName, id,
                      ((flags | SQLITE_OPEN_READONLY) & ~SQLITE_OPEN_READWRITE),

                      pOutFlags );
    }else{
      return SQLITE_CANTOPEN;
    }
  }

  if( pOutFlags ){
    *pOutFlags = flags & SQLITE_OPEN_READWRITE ? SQLITE_OPEN_READWRITE : SQLITE_OPEN_READONLY;
  }

  pFile->pMethod = &os2IoMethod;
  pFile->h = h;
  OpenCounter(+1);
  OSTRACE(( "OPEN %d pOutFlags=%d\n", pFile->h, pOutFlags ));
  return SQLITE_OK;
}

/*
................................................................................
** Delete the named file.
*/
static int os2Delete(
  sqlite3_vfs *pVfs,                     /* Not used on os2 */
  const char *zFilename,                 /* Name of file to delete */
  int syncDir                            /* Not used on os2 */
){
  APIRET rc = NO_ERROR;
  char *zFilenameCp = convertUtf8PathToCp( zFilename );
  SimulateIOError( return SQLITE_IOERR_DELETE );

  rc = DosDelete( (PSZ)zFilenameCp );
  free( zFilenameCp );
  OSTRACE(( "DELETE \"%s\"\n", zFilename ));


  return rc == NO_ERROR ? SQLITE_OK : SQLITE_IOERR_DELETE;
}

/*
** Check the existance and status of a file.
*/
static int os2Access(
  sqlite3_vfs *pVfs,        /* Not used on os2 */
................................................................................
/*
** A no-op since the error code is returned on the DosLoadModule call.
** os2Dlopen returns zero if DosLoadModule is not successful.
*/
static void os2DlError(sqlite3_vfs *pVfs, int nBuf, char *zBufOut){
/* no-op */
}
static void *os2DlSym(sqlite3_vfs *pVfs, void *pHandle, const char *zSymbol){
  PFN pfn;
  APIRET rc;
  rc = DosQueryProcAddr((HMODULE)pHandle, 0L, zSymbol, &pfn);
  if( rc != NO_ERROR ){
    /* if the symbol itself was not found, search again for the same
     * symbol with an extra underscore, that might be needed depending
     * on the calling convention */
    char _zSymbol[256] = "_";
    strncat(_zSymbol, zSymbol, 255);
    rc = DosQueryProcAddr((HMODULE)pHandle, 0L, _zSymbol, &pfn);
  }
  return rc != NO_ERROR ? 0 : (void*)pfn;
}
static void os2DlClose(sqlite3_vfs *pVfs, void *pHandle){
  DosFreeModule((HMODULE)pHandle);
}
#else /* if SQLITE_OMIT_LOAD_EXTENSION is defined: */
  #define os2DlOpen 0
  #define os2DlError 0
................................................................................
** Find the current time (in Universal Coordinated Time).  Write the
** current time and date as a Julian Day number into *prNow and
** return 0.  Return 1 if the time and date cannot be found.
*/
int os2CurrentTime( sqlite3_vfs *pVfs, double *prNow ){
  double now;
  SHORT minute; /* needs to be able to cope with negative timezone offset */
  USHORT second, hour,
         day, month, year;
  DATETIME dt;
  DosGetDateTime( &dt );

  second = (USHORT)dt.seconds;
  minute = (SHORT)dt.minutes + dt.timezone;
  hour = (USHORT)dt.hours;
  day = (USHORT)dt.day;
  month = (USHORT)dt.month;
  year = (USHORT)dt.year;

................................................................................
    367*(month - 2 - (month - 14)/12*12)/12 -
    3*((year + 4900 + (month - 14)/12)/100)/4;

  /* Add the fractional hours, mins and seconds */
  now += (hour + 12.0)/24.0;
  now += minute/1440.0;
  now += second/86400.0;

  *prNow = now;
#ifdef SQLITE_TEST
  if( sqlite3_current_time ){
    *prNow = sqlite3_current_time/86400.0 + 2440587.5;
  }
#endif
  return 0;
}

















static int os2GetLastError(sqlite3_vfs *pVfs, int nBuf, char *zBuf){
  return 0;
}

/*
** Initialize and deinitialize the operating system interface.
*/
int sqlite3_os_init(void){
  static sqlite3_vfs os2Vfs = {
    1,                 /* iVersion */
    sizeof(os2File),   /* szOsFile */
    CCHMAXPATH,        /* mxPathname */
    0,                 /* pNext */
    "os2",             /* zName */
    0,                 /* pAppData */

    os2Open,           /* xOpen */
................................................................................
    os2DlError,        /* xDlError */
    os2DlSym,          /* xDlSym */
    os2DlClose,        /* xDlClose */
    os2Randomness,     /* xRandomness */
    os2Sleep,          /* xSleep */
    os2CurrentTime,    /* xCurrentTime */
    os2GetLastError,   /* xGetLastError */




  };
  sqlite3_vfs_register(&os2Vfs, 1);
  initUconvObjects();
  return SQLITE_OK;
}
int sqlite3_os_end(void){
  freeUconvObjects();
  return SQLITE_OK;
}

#endif /* SQLITE_OS_OS2 */

}

/*
** This vector defines all the methods that can operate on an
** sqlite3_file for os2.
*/
static const sqlite3_io_methods os2IoMethod = {
  1,                              /* iVersion */
  os2Close,                       /* xClose */
  os2Read,                        /* xRead */
  os2Write,                       /* xWrite */
  os2Truncate,                    /* xTruncate */
  os2Sync,                        /* xSync */
  os2FileSize,                    /* xFileSize */
  os2Lock,                        /* xLock */
  os2Unlock,                      /* xUnlock */
  os2CheckReservedLock,           /* xCheckReservedLock */
  os2FileControl,                 /* xFileControl */
  os2SectorSize,                  /* xSectorSize */
  os2DeviceCharacteristics,       /* xDeviceCharacteristics */
  0,                              /* xShmMap */
  0,                              /* xShmLock */
  0,                              /* xShmBarrier */
  0                               /* xShmUnmap */
};

/***************************************************************************
** Here ends the I/O methods that form the sqlite3_io_methods object.
**
** The next block of code implements the VFS methods.
****************************************************************************/
................................................................................


/*
** Open a file.
*/
static int os2Open(
  sqlite3_vfs *pVfs,            /* Not used */
  const char *zName,            /* Name of the file (UTF-8) */
  sqlite3_file *id,             /* Write the SQLite file handle here */
  int flags,                    /* Open mode flags */
  int *pOutFlags                /* Status return flags */
){
  HFILE h;

  ULONG ulOpenFlags = 0;
  ULONG ulOpenMode = 0;
  ULONG ulAction = 0;
  ULONG rc;
  os2File *pFile = (os2File*)id;

  const char *zUtf8Name = zName;
  char *zNameCp;
  char  zTmpname[CCHMAXPATH];

  int isExclusive  = (flags & SQLITE_OPEN_EXCLUSIVE);
  int isDelete     = (flags & SQLITE_OPEN_DELETEONCLOSE);
  int isCreate     = (flags & SQLITE_OPEN_CREATE);
  int isReadWrite  = (flags & SQLITE_OPEN_READWRITE);
#ifndef NDEBUG
  int isReadonly   = (flags & SQLITE_OPEN_READONLY);
  int eType        = (flags & 0xFFFFFF00);
  int isOpenJournal = (isCreate && (
        eType==SQLITE_OPEN_MASTER_JOURNAL 
     || eType==SQLITE_OPEN_MAIN_JOURNAL 
     || eType==SQLITE_OPEN_WAL
  ));
#endif

  UNUSED_PARAMETER(pVfs);
  assert( id!=0 );

  /* Check the following statements are true: 
  **
  **   (a) Exactly one of the READWRITE and READONLY flags must be set, and 
  **   (b) if CREATE is set, then READWRITE must also be set, and
  **   (c) if EXCLUSIVE is set, then CREATE must also be set.
  **   (d) if DELETEONCLOSE is set, then CREATE must also be set.
  */
  assert((isReadonly==0 || isReadWrite==0) && (isReadWrite || isReadonly));
  assert(isCreate==0 || isReadWrite);
  assert(isExclusive==0 || isCreate);
  assert(isDelete==0 || isCreate);

  /* The main DB, main journal, WAL file and master journal are never 
  ** automatically deleted. Nor are they ever temporary files.  */
  assert( (!isDelete && zName) || eType!=SQLITE_OPEN_MAIN_DB );
  assert( (!isDelete && zName) || eType!=SQLITE_OPEN_MAIN_JOURNAL );
  assert( (!isDelete && zName) || eType!=SQLITE_OPEN_MASTER_JOURNAL );
  assert( (!isDelete && zName) || eType!=SQLITE_OPEN_WAL );

  /* Assert that the upper layer has set one of the "file-type" flags. */
  assert( eType==SQLITE_OPEN_MAIN_DB      || eType==SQLITE_OPEN_TEMP_DB 
       || eType==SQLITE_OPEN_MAIN_JOURNAL || eType==SQLITE_OPEN_TEMP_JOURNAL 
       || eType==SQLITE_OPEN_SUBJOURNAL   || eType==SQLITE_OPEN_MASTER_JOURNAL 
       || eType==SQLITE_OPEN_TRANSIENT_DB || eType==SQLITE_OPEN_WAL
  );

  memset( pFile, 0, sizeof(*pFile) );
  pFile->pMethod = &os2IoMethod;

  /* If the second argument to this function is NULL, generate a 
  ** temporary file name to use 
  */
  if( !zUtf8Name ){
    assert(isDelete && !isOpenJournal);
    rc = getTempname(CCHMAXPATH, zTmpname);
    if( rc!=SQLITE_OK ){
      return rc;
    }
    zUtf8Name = zTmpname;
  }







  if( isReadWrite ){
    ulOpenMode |= OPEN_ACCESS_READWRITE;

  }else{
    ulOpenMode |= OPEN_ACCESS_READONLY;

  }







  /* Open in random access mode for possibly better speed.  Allow full
  ** sharing because file locks will provide exclusive access when needed.
  */
  ulOpenMode |= OPEN_FLAGS_RANDOM;
  ulOpenMode |= OPEN_FLAGS_FAIL_ON_ERROR;
  ulOpenMode |= OPEN_FLAGS_NOINHERIT;
  ulOpenMode |= OPEN_SHARE_DENYNONE;


  /* SQLITE_OPEN_EXCLUSIVE is used to make sure that a new file is 
  ** created. SQLite doesn't use it to indicate "exclusive access" 
  ** as it is usually understood.
  */
  if( isExclusive ){
    /* Creates a new file, only if it does not already exist. */
    /* If the file exists, it fails. */
    ulOpenFlags |= OPEN_ACTION_CREATE_IF_NEW | OPEN_ACTION_FAIL_IF_EXISTS;
  }else if( isCreate ){
    /* Open existing file, or create if it doesn't exist */
    ulOpenFlags |= OPEN_ACTION_CREATE_IF_NEW | OPEN_ACTION_OPEN_IF_EXISTS;
  }else{

    /* Opens a file, only if it exists. */
    ulOpenFlags |= OPEN_ACTION_FAIL_IF_NEW | OPEN_ACTION_OPEN_IF_EXISTS;
  }


  /* For DELETEONCLOSE, save a pointer to the converted filename */
  if( isDelete ){
    char pathUtf8[CCHMAXPATH];



    os2FullPathname( pVfs, zUtf8Name, CCHMAXPATH, pathUtf8 );
    pFile->pathToDel = convertUtf8PathToCp( pathUtf8 );




  }






  zNameCp = convertUtf8PathToCp( zUtf8Name );
  rc = DosOpen( (PSZ)zNameCp,
                &h,
                &ulAction,
                0L,
                FILE_NORMAL,
                ulOpenFlags,
                ulOpenMode,
                (PEAOP2)NULL );
  free( zNameCp );

  if( rc != NO_ERROR ){
    OSTRACE(( "OPEN Invalid handle rc=%d: zName=%s, ulAction=%#lx, ulFlags=%#lx, ulMode=%#lx\n",
              rc, zUtf8Name, ulAction, ulOpenFlags, ulOpenMode ));
    if( pFile->pathToDel )
      free( pFile->pathToDel );
    pFile->pathToDel = NULL;


    if( isReadWrite ){

      return os2Open( pVfs, zName, id,

                      ((flags|SQLITE_OPEN_READONLY)&~(SQLITE_OPEN_CREATE|SQLITE_OPEN_READWRITE)),
                      pOutFlags );
    }else{
      return SQLITE_CANTOPEN;
    }
  }

  if( pOutFlags ){
    *pOutFlags = isReadWrite ? SQLITE_OPEN_READWRITE : SQLITE_OPEN_READONLY;
  }


  pFile->h = h;
  OpenCounter(+1);
  OSTRACE(( "OPEN %d pOutFlags=%d\n", pFile->h, pOutFlags ));
  return SQLITE_OK;
}

/*
................................................................................
** Delete the named file.
*/
static int os2Delete(
  sqlite3_vfs *pVfs,                     /* Not used on os2 */
  const char *zFilename,                 /* Name of file to delete */
  int syncDir                            /* Not used on os2 */
){
  APIRET rc;
  char *zFilenameCp;
  SimulateIOError( return SQLITE_IOERR_DELETE );
  zFilenameCp = convertUtf8PathToCp( zFilename );
  rc = DosDelete( (PSZ)zFilenameCp );
  free( zFilenameCp );
  OSTRACE(( "DELETE \"%s\"\n", zFilename ));
  return (rc == NO_ERROR ||
          rc == ERROR_FILE_NOT_FOUND ||
          rc == ERROR_PATH_NOT_FOUND ) ? SQLITE_OK : SQLITE_IOERR_DELETE;
}

/*
** Check the existance and status of a file.
*/
static int os2Access(
  sqlite3_vfs *pVfs,        /* Not used on os2 */
................................................................................
/*
** A no-op since the error code is returned on the DosLoadModule call.
** os2Dlopen returns zero if DosLoadModule is not successful.
*/
static void os2DlError(sqlite3_vfs *pVfs, int nBuf, char *zBufOut){
/* no-op */
}
static void (*os2DlSym(sqlite3_vfs *pVfs, void *pHandle, const char *zSymbol))(void){
  PFN pfn;
  APIRET rc;
  rc = DosQueryProcAddr((HMODULE)pHandle, 0L, zSymbol, &pfn);
  if( rc != NO_ERROR ){
    /* if the symbol itself was not found, search again for the same
     * symbol with an extra underscore, that might be needed depending
     * on the calling convention */
    char _zSymbol[256] = "_";
    strncat(_zSymbol, zSymbol, 255);
    rc = DosQueryProcAddr((HMODULE)pHandle, 0L, _zSymbol, &pfn);
  }
  return rc != NO_ERROR ? 0 : (void(*)(void))pfn;
}
static void os2DlClose(sqlite3_vfs *pVfs, void *pHandle){
  DosFreeModule((HMODULE)pHandle);
}
#else /* if SQLITE_OMIT_LOAD_EXTENSION is defined: */
  #define os2DlOpen 0
  #define os2DlError 0
................................................................................
** Find the current time (in Universal Coordinated Time).  Write the
** current time and date as a Julian Day number into *prNow and
** return 0.  Return 1 if the time and date cannot be found.
*/
int os2CurrentTime( sqlite3_vfs *pVfs, double *prNow ){
  double now;
  SHORT minute; /* needs to be able to cope with negative timezone offset */
  USHORT hundredths, second, hour,
         day, month, year;
  DATETIME dt;
  DosGetDateTime( &dt );
  hundredths = (USHORT)dt.hundredths;
  second = (USHORT)dt.seconds;
  minute = (SHORT)dt.minutes + dt.timezone;
  hour = (USHORT)dt.hours;
  day = (USHORT)dt.day;
  month = (USHORT)dt.month;
  year = (USHORT)dt.year;

................................................................................
    367*(month - 2 - (month - 14)/12*12)/12 -
    3*((year + 4900 + (month - 14)/12)/100)/4;

  /* Add the fractional hours, mins and seconds */
  now += (hour + 12.0)/24.0;
  now += minute/1440.0;
  now += second/86400.0;
  now += hundredths/8640000.0;
  *prNow = now;
#ifdef SQLITE_TEST
  if( sqlite3_current_time ){
    *prNow = sqlite3_current_time/86400.0 + 2440587.5;
  }
#endif
  return 0;
}

/*
** Find the current time (in Universal Coordinated Time).  Write into *piNow
** the current time and date as a Julian Day number times 86_400_000.  In
** other words, write into *piNow the number of milliseconds since the Julian
** epoch of noon in Greenwich on November 24, 4714 B.C according to the
** proleptic Gregorian calendar.
**
** On success, return 0.  Return 1 if the time and date cannot be found.
*/
static int os2CurrentTimeInt64(sqlite3_vfs *pVfs, sqlite3_int64 *piNow){
  double now;
  os2CurrentTime(pVfs, &now);
  *piNow = now * 86400000;
  return 0;
}

static int os2GetLastError(sqlite3_vfs *pVfs, int nBuf, char *zBuf){
  return 0;
}

/*
** Initialize and deinitialize the operating system interface.
*/
int sqlite3_os_init(void){
  static sqlite3_vfs os2Vfs = {
    3,                 /* iVersion */
    sizeof(os2File),   /* szOsFile */
    CCHMAXPATH,        /* mxPathname */
    0,                 /* pNext */
    "os2",             /* zName */
    0,                 /* pAppData */

    os2Open,           /* xOpen */
................................................................................
    os2DlError,        /* xDlError */
    os2DlSym,          /* xDlSym */
    os2DlClose,        /* xDlClose */
    os2Randomness,     /* xRandomness */
    os2Sleep,          /* xSleep */
    os2CurrentTime,    /* xCurrentTime */
    os2GetLastError,   /* xGetLastError */
    os2CurrentTimeInt64 /* xCurrentTimeInt64 */
    0,                 /* xSetSystemCall */
    0,                 /* xGetSystemCall */
    0,                 /* xNextSystemCall */
  };
  sqlite3_vfs_register(&os2Vfs, 1);
  initUconvObjects();
  return SQLITE_OK;
}
int sqlite3_os_end(void){
  freeUconvObjects();
  return SQLITE_OK;
}

#endif /* SQLITE_OS_OS2 */

typedef struct unixFile unixFile;
struct unixFile {
  sqlite3_io_methods const *pMethod;  /* Always the first entry */
  unixInodeInfo *pInode;              /* Info about locks on this inode */
  int h;                              /* The file descriptor */
  int dirfd;                          /* File descriptor for the directory */
  unsigned char eFileLock;            /* The type of lock held on this fd */

  int lastErrno;                      /* The unix errno from last I/O error */
  void *lockingContext;               /* Locking style specific state */
  UnixUnusedFd *pUnused;              /* Pre-allocated UnixUnusedFd */
  int fileFlags;                      /* Miscellanous flags */
  const char *zPath;                  /* Name of the file */
  unixShm *pShm;                      /* Shared memory segment information */
  int szChunk;                        /* Configured by FCNTL_CHUNK_SIZE */
#if SQLITE_ENABLE_LOCKING_STYLE
  int openFlags;                      /* The flags specified at open() */
#endif
#if SQLITE_ENABLE_LOCKING_STYLE || defined(__APPLE__)
................................................................................
  ** it is larger than the struct CrashFile defined in test6.c.
  */
  char aPadding[32];
#endif
};

/*
** The following macros define bits in unixFile.fileFlags
*/
#define SQLITE_WHOLE_FILE_LOCKING  0x0001   /* Use whole-file locking */


/*
** Include code that is common to all os_*.c files
*/
#include "os_common.h"

/*
................................................................................
#ifndef O_NOFOLLOW
# define O_NOFOLLOW 0
#endif
#ifndef O_BINARY
# define O_BINARY 0
#endif

/*




































** The DJGPP compiler environment looks mostly like Unix, but it
** lacks the fcntl() system call.  So redefine fcntl() to be something
** that always succeeds.  This means that locking does not occur under
** DJGPP.  But it is DOS - what did you expect?
*/
#ifdef __DJGPP__
# define fcntl(A,B,C) 0





#endif























































/*
** The threadid macro resolves to the thread-id or to 0.  Used for
** testing and debugging only.




*/














#if SQLITE_THREADSAFE
#define threadid pthread_self()


#else
#define threadid 0
#endif





























































/*
** Helper functions to obtain and relinquish the global mutex. The
** global mutex is used to protect the unixInodeInfo and
** vxworksFileId objects used by this file, all of which may be 
** shared by multiple threads.
**
................................................................................
  int s;
  int savedErrno;
  if( op==F_GETLK ){
    zOpName = "GETLK";
  }else if( op==F_SETLK ){
    zOpName = "SETLK";
  }else{
    s = fcntl(fd, op, p);
    sqlite3DebugPrintf("fcntl unknown %d %d %d\n", fd, op, s);
    return s;
  }
  if( p->l_type==F_RDLCK ){
    zType = "RDLCK";
  }else if( p->l_type==F_WRLCK ){
    zType = "WRLCK";
  }else if( p->l_type==F_UNLCK ){
    zType = "UNLCK";
  }else{
    assert( 0 );
  }
  assert( p->l_whence==SEEK_SET );
  s = fcntl(fd, op, p);
  savedErrno = errno;
  sqlite3DebugPrintf("fcntl %d %d %s %s %d %d %d %d\n",
     threadid, fd, zOpName, zType, (int)p->l_start, (int)p->l_len,
     (int)p->l_pid, s);
  if( s==(-1) && op==F_SETLK && (p->l_type==F_RDLCK || p->l_type==F_WRLCK) ){
    struct flock l2;
    l2 = *p;
    fcntl(fd, F_GETLK, &l2);
    if( l2.l_type==F_RDLCK ){
      zType = "RDLCK";
    }else if( l2.l_type==F_WRLCK ){
      zType = "WRLCK";
    }else if( l2.l_type==F_UNLCK ){
      zType = "UNLCK";
    }else{
................................................................................
    }
    sqlite3DebugPrintf("fcntl-failure-reason: %s %d %d %d\n",
       zType, (int)l2.l_start, (int)l2.l_len, (int)l2.l_pid);
  }
  errno = savedErrno;
  return s;
}
#define fcntl lockTrace
#endif /* SQLITE_LOCK_TRACE */


/*
** Retry ftruncate() calls that fail due to EINTR
*/
#ifdef EINTR
static int robust_ftruncate(int h, sqlite3_int64 sz){
  int rc;
  do{ rc = ftruncate(h,sz); }while( rc<0 && errno==EINTR );
  return rc;
}
#else
# define robust_ftruncate(a,b) ftruncate(a,b)
#endif 


/*
** This routine translates a standard POSIX errno code into something
** useful to the clients of the sqlite3 functions.  Specifically, it is
** intended to translate a variety of "try again" errors into SQLITE_BUSY
** and a variety of "please close the file descriptor NOW" errors into 
** SQLITE_IOERR
................................................................................
** A single inode can have multiple file descriptors, so each unixFile
** structure contains a pointer to an instance of this object and this
** object keeps a count of the number of unixFile pointing to it.
*/
struct unixInodeInfo {
  struct unixFileId fileId;       /* The lookup key */
  int nShared;                    /* Number of SHARED locks held */
  int eFileLock;                  /* One of SHARED_LOCK, RESERVED_LOCK etc. */

  int nRef;                       /* Number of pointers to this structure */
  unixShmNode *pShmNode;          /* Shared memory associated with this inode */
  int nLock;                      /* Number of outstanding file locks */
  UnixUnusedFd *pUnused;          /* Unused file descriptors to close */
  unixInodeInfo *pNext;           /* List of all unixInodeInfo objects */
  unixInodeInfo *pPrev;           /*    .... doubly linked */
#if defined(SQLITE_ENABLE_LOCKING_STYLE)
................................................................................
**
** The first argument passed to the macro should be the error code that
** will be returned to SQLite (e.g. SQLITE_IOERR_DELETE, SQLITE_CANTOPEN). 
** The two subsequent arguments should be the name of the OS function that
** failed (e.g. "unlink", "open") and the the associated file-system path,
** if any.
*/
#define unixLogError(a,b,c)     unixLogError_x(a,b,c,__LINE__)
static int unixLogError_x(
  int errcode,                    /* SQLite error code */
  const char *zFunc,              /* Name of OS function that failed */
  const char *zPath,              /* File path associated with error */
  int iLine                       /* Source line number where error occurred */
){
  char *zErr;                     /* Message from strerror() or equivalent */


  /* If this is not a threadsafe build (SQLITE_THREADSAFE==0), then use
  ** the strerror() function to obtain the human-readable error message
  ** equivalent to errno. Otherwise, use strerror_r().
  */ 
#if SQLITE_THREADSAFE && defined(HAVE_STRERROR_R)
  char aErr[80];
................................................................................
  ** available, the error message will often be an empty string. Not a
  ** huge problem. Incorrectly concluding that the GNU version is available 
  ** could lead to a segfault though.
  */
#if defined(STRERROR_R_CHAR_P) || defined(__USE_GNU)
  zErr = 
# endif
  strerror_r(errno, aErr, sizeof(aErr)-1);

#elif SQLITE_THREADSAFE
  /* This is a threadsafe build, but strerror_r() is not available. */
  zErr = "";
#else
  /* Non-threadsafe build, use strerror(). */
  zErr = strerror(errno);
#endif

  assert( errcode!=SQLITE_OK );

  sqlite3_log(errcode,
      "os_unix.c: %s() at line %d - \"%s\" errno=%d path=%s",
      zFunc, iLine, zErr, errno, (zPath ? zPath : "n/a")

  );

  return errcode;
}





















/*
** Close all file descriptors accumuated in the unixInodeInfo->pUnused list.
** If all such file descriptors are closed without error, the list is
** cleared and SQLITE_OK returned.
**
** Otherwise, if an error occurs, then successfully closed file descriptor
** entries are removed from the list, and SQLITE_IOERR_CLOSE returned. 
** not deleted and SQLITE_IOERR_CLOSE returned.
*/ 
static int closePendingFds(unixFile *pFile){
  int rc = SQLITE_OK;
  unixInodeInfo *pInode = pFile->pInode;
  UnixUnusedFd *pError = 0;
  UnixUnusedFd *p;
  UnixUnusedFd *pNext;
  for(p=pInode->pUnused; p; p=pNext){
    pNext = p->pNext;
    if( close(p->fd) ){
      pFile->lastErrno = errno;
      rc = unixLogError(SQLITE_IOERR_CLOSE, "close", pFile->zPath);
      p->pNext = pError;
      pError = p;
    }else{
      sqlite3_free(p);
    }
  }
  pInode->pUnused = pError;
  return rc;
}

/*
** Release a unixInodeInfo structure previously allocated by findInodeInfo().
**
** The mutex entered using the unixEnterMutex() function must be held
** when this function is called.
................................................................................

  assert( unixMutexHeld() );

  /* Get low-level information about the file that we can used to
  ** create a unique name for the file.
  */
  fd = pFile->h;
  rc = fstat(fd, &statbuf);
  if( rc!=0 ){
    pFile->lastErrno = errno;
#ifdef EOVERFLOW
    if( pFile->lastErrno==EOVERFLOW ) return SQLITE_NOLFS;
#endif
    return SQLITE_IOERR;
  }
................................................................................
  ** prior to accessing the inode number.  The one byte written is
  ** an ASCII 'S' character which also happens to be the first byte
  ** in the header of every SQLite database.  In this way, if there
  ** is a race condition such that another thread has already populated
  ** the first page of the database, no damage is done.
  */
  if( statbuf.st_size==0 && (pFile->fsFlags & SQLITE_FSFLAGS_IS_MSDOS)!=0 ){
    do{ rc = write(fd, "S", 1); }while( rc<0 && errno==EINTR );
    if( rc!=1 ){
      pFile->lastErrno = errno;
      return SQLITE_IOERR;
    }
    rc = fstat(fd, &statbuf);
    if( rc!=0 ){
      pFile->lastErrno = errno;
      return SQLITE_IOERR;
    }
  }
#endif

................................................................................
  if( pFile->pInode->eFileLock>SHARED_LOCK ){
    reserved = 1;
  }

  /* Otherwise see if some other process holds it.
  */
#ifndef __DJGPP__
  if( !reserved ){
    struct flock lock;
    lock.l_whence = SEEK_SET;
    lock.l_start = RESERVED_BYTE;
    lock.l_len = 1;
    lock.l_type = F_WRLCK;
    if (-1 == fcntl(pFile->h, F_GETLK, &lock)) {
      int tErrno = errno;
      rc = sqliteErrorFromPosixError(tErrno, SQLITE_IOERR_CHECKRESERVEDLOCK);
      pFile->lastErrno = tErrno;
    } else if( lock.l_type!=F_UNLCK ){
      reserved = 1;
    }
  }
................................................................................
  
  unixLeaveMutex();
  OSTRACE(("TEST WR-LOCK %d %d %d (unix)\n", pFile->h, rc, reserved));

  *pResOut = reserved;
  return rc;
}













































/*
** Lock the file with the lock specified by parameter eFileLock - one
** of the following:
**
**     (1) SHARED_LOCK
**     (2) RESERVED_LOCK
................................................................................
  lock.l_len = 1L;
  lock.l_whence = SEEK_SET;
  if( eFileLock==SHARED_LOCK 
      || (eFileLock==EXCLUSIVE_LOCK && pFile->eFileLock<PENDING_LOCK)
  ){
    lock.l_type = (eFileLock==SHARED_LOCK?F_RDLCK:F_WRLCK);
    lock.l_start = PENDING_BYTE;
    s = fcntl(pFile->h, F_SETLK, &lock);
    if( s==(-1) ){
      tErrno = errno;
      rc = sqliteErrorFromPosixError(tErrno, SQLITE_IOERR_LOCK);
      if( IS_LOCK_ERROR(rc) ){
        pFile->lastErrno = tErrno;
      }
      goto end_lock;
................................................................................
  if( eFileLock==SHARED_LOCK ){
    assert( pInode->nShared==0 );
    assert( pInode->eFileLock==0 );

    /* Now get the read-lock */
    lock.l_start = SHARED_FIRST;
    lock.l_len = SHARED_SIZE;
    if( (s = fcntl(pFile->h, F_SETLK, &lock))==(-1) ){
      tErrno = errno;
    }
    /* Drop the temporary PENDING lock */
    lock.l_start = PENDING_BYTE;
    lock.l_len = 1L;
    lock.l_type = F_UNLCK;
    if( fcntl(pFile->h, F_SETLK, &lock)!=0 ){
      if( s != -1 ){
        /* This could happen with a network mount */
        tErrno = errno; 
        rc = sqliteErrorFromPosixError(tErrno, SQLITE_IOERR_UNLOCK); 
        if( IS_LOCK_ERROR(rc) ){
          pFile->lastErrno = tErrno;
        }
................................................................................
      case EXCLUSIVE_LOCK:
        lock.l_start = SHARED_FIRST;
        lock.l_len = SHARED_SIZE;
        break;
      default:
        assert(0);
    }
    s = fcntl(pFile->h, F_SETLK, &lock);
    if( s==(-1) ){
      tErrno = errno;
      rc = sqliteErrorFromPosixError(tErrno, SQLITE_IOERR_LOCK);
      if( IS_LOCK_ERROR(rc) ){
        pFile->lastErrno = tErrno;
      }
    }
................................................................................
** 
** If handleNFSUnlock is true, then on downgrading an EXCLUSIVE_LOCK to SHARED
** the byte range is divided into 2 parts and the first part is unlocked then
** set to a read lock, then the other part is simply unlocked.  This works 
** around a bug in BSD NFS lockd (also seen on MacOSX 10.3+) that fails to 
** remove the write lock on a region when a read lock is set.
*/
static int _posixUnlock(sqlite3_file *id, int eFileLock, int handleNFSUnlock){
  unixFile *pFile = (unixFile*)id;
  unixInodeInfo *pInode;
  struct flock lock;
  int rc = SQLITE_OK;
  int h;
  int tErrno;                      /* Error code from system call errors */

................................................................................
    **  2:   [....W]
    **  3:   [RRRRW]
    **  4:   [RRRR.]
    */
    if( eFileLock==SHARED_LOCK ){

#if !defined(__APPLE__) || !SQLITE_ENABLE_LOCKING_STYLE

      assert( handleNFSUnlock==0 );
#endif
#if defined(__APPLE__) && SQLITE_ENABLE_LOCKING_STYLE
      if( handleNFSUnlock ){
        off_t divSize = SHARED_SIZE - 1;
        
        lock.l_type = F_UNLCK;
        lock.l_whence = SEEK_SET;
        lock.l_start = SHARED_FIRST;
        lock.l_len = divSize;
        if( fcntl(h, F_SETLK, &lock)==(-1) ){
          tErrno = errno;
          rc = sqliteErrorFromPosixError(tErrno, SQLITE_IOERR_UNLOCK);
          if( IS_LOCK_ERROR(rc) ){
            pFile->lastErrno = tErrno;
          }
          goto end_unlock;
        }
        lock.l_type = F_RDLCK;
        lock.l_whence = SEEK_SET;
        lock.l_start = SHARED_FIRST;
        lock.l_len = divSize;
        if( fcntl(h, F_SETLK, &lock)==(-1) ){
          tErrno = errno;
          rc = sqliteErrorFromPosixError(tErrno, SQLITE_IOERR_RDLOCK);
          if( IS_LOCK_ERROR(rc) ){
            pFile->lastErrno = tErrno;
          }
          goto end_unlock;
        }
        lock.l_type = F_UNLCK;
        lock.l_whence = SEEK_SET;
        lock.l_start = SHARED_FIRST+divSize;
        lock.l_len = SHARED_SIZE-divSize;
        if( fcntl(h, F_SETLK, &lock)==(-1) ){
          tErrno = errno;
          rc = sqliteErrorFromPosixError(tErrno, SQLITE_IOERR_UNLOCK);
          if( IS_LOCK_ERROR(rc) ){
            pFile->lastErrno = tErrno;
          }
          goto end_unlock;
        }
................................................................................
      }else
#endif /* defined(__APPLE__) && SQLITE_ENABLE_LOCKING_STYLE */
      {
        lock.l_type = F_RDLCK;
        lock.l_whence = SEEK_SET;
        lock.l_start = SHARED_FIRST;
        lock.l_len = SHARED_SIZE;
        if( fcntl(h, F_SETLK, &lock)==(-1) ){
          tErrno = errno;
          rc = sqliteErrorFromPosixError(tErrno, SQLITE_IOERR_RDLOCK);
          if( IS_LOCK_ERROR(rc) ){
            pFile->lastErrno = tErrno;
          }
          goto end_unlock;
        }
      }
    }
    lock.l_type = F_UNLCK;
    lock.l_whence = SEEK_SET;
    lock.l_start = PENDING_BYTE;
    lock.l_len = 2L;  assert( PENDING_BYTE+1==RESERVED_BYTE );
    if( fcntl(h, F_SETLK, &lock)!=(-1) ){
      pInode->eFileLock = SHARED_LOCK;
    }else{
      tErrno = errno;
      rc = sqliteErrorFromPosixError(tErrno, SQLITE_IOERR_UNLOCK);
      if( IS_LOCK_ERROR(rc) ){
        pFile->lastErrno = tErrno;
      }
................................................................................
    if( pInode->nShared==0 ){
      lock.l_type = F_UNLCK;
      lock.l_whence = SEEK_SET;
      lock.l_start = lock.l_len = 0L;
      SimulateIOErrorBenign(1);
      SimulateIOError( h=(-1) )
      SimulateIOErrorBenign(0);
      if( fcntl(h, F_SETLK, &lock)!=(-1) ){
        pInode->eFileLock = NO_LOCK;
      }else{
        tErrno = errno;
        rc = sqliteErrorFromPosixError(tErrno, SQLITE_IOERR_UNLOCK);
        if( IS_LOCK_ERROR(rc) ){
          pFile->lastErrno = tErrno;
        }
................................................................................
    /* Decrement the count of locks against this same file.  When the
    ** count reaches zero, close any other file descriptors whose close
    ** was deferred because of outstanding locks.
    */
    pInode->nLock--;
    assert( pInode->nLock>=0 );
    if( pInode->nLock==0 ){
      int rc2 = closePendingFds(pFile);
      if( rc==SQLITE_OK ){
        rc = rc2;
      }
    }
  }
	
end_unlock:
  unixLeaveMutex();
  if( rc==SQLITE_OK ) pFile->eFileLock = eFileLock;
  return rc;
................................................................................
** Lower the locking level on file descriptor pFile to eFileLock.  eFileLock
** must be either NO_LOCK or SHARED_LOCK.
**
** If the locking level of the file descriptor is already at or below
** the requested locking level, this routine is a no-op.
*/
static int unixUnlock(sqlite3_file *id, int eFileLock){
  return _posixUnlock(id, eFileLock, 0);
}

/*
** This function performs the parts of the "close file" operation 
** common to all locking schemes. It closes the directory and file
** handles, if they are valid, and sets all fields of the unixFile
** structure to 0.
................................................................................
** even on VxWorks.  A mutex will be acquired on VxWorks by the
** vxworksReleaseFileId() routine.
*/
static int closeUnixFile(sqlite3_file *id){
  unixFile *pFile = (unixFile*)id;
  if( pFile ){
    if( pFile->dirfd>=0 ){
      int err = close(pFile->dirfd);
      if( err ){
        pFile->lastErrno = errno;
        return unixLogError(SQLITE_IOERR_DIR_CLOSE, "close", pFile->zPath);
      }else{
        pFile->dirfd=-1;
      }
    }
    if( pFile->h>=0 ){

      int err = close(pFile->h);
      if( err ){
        pFile->lastErrno = errno;
        return unixLogError(SQLITE_IOERR_CLOSE, "close", pFile->zPath);
      }
    }
#if OS_VXWORKS
    if( pFile->pId ){
      if( pFile->isDelete ){
        unlink(pFile->pId->zCanonicalName);
      }
      vxworksReleaseFileId(pFile->pId);
................................................................................
*/
static int unixClose(sqlite3_file *id){
  int rc = SQLITE_OK;
  if( id ){
    unixFile *pFile = (unixFile *)id;
    unixUnlock(id, NO_LOCK);
    unixEnterMutex();


    if( pFile->pInode && pFile->pInode->nLock ){
      /* If there are outstanding locks, do not actually close the file just
      ** yet because that would clear those locks.  Instead, add the file
      ** descriptor to pInode->pUnused list.  It will be automatically closed 
      ** when the last lock is cleared.
      */
      setPendingFd(pFile);
................................................................................
  if( pFile->eFileLock>SHARED_LOCK ){
    /* Either this connection or some other connection in the same process
    ** holds a lock on the file.  No need to check further. */
    reserved = 1;
  }else{
    /* The lock is held if and only if the lockfile exists */
    const char *zLockFile = (const char*)pFile->lockingContext;
    reserved = access(zLockFile, 0)==0;
  }
  OSTRACE(("TEST WR-LOCK %d %d %d (dotlock)\n", pFile->h, rc, reserved));
  *pResOut = reserved;
  return rc;
}

/*
................................................................................
    /* Always update the timestamp on the old file */
    utimes(zLockFile, NULL);
#endif
    return SQLITE_OK;
  }
  
  /* grab an exclusive lock */
  fd = open(zLockFile,O_RDONLY|O_CREAT|O_EXCL,0600);
  if( fd<0 ){
    /* failed to open/create the file, someone else may have stolen the lock */
    int tErrno = errno;
    if( EEXIST == tErrno ){
      rc = SQLITE_BUSY;
    } else {
      rc = sqliteErrorFromPosixError(tErrno, SQLITE_IOERR_LOCK);
      if( IS_LOCK_ERROR(rc) ){
        pFile->lastErrno = tErrno;
      }
    }
    return rc;
  } 
  if( close(fd) ){
    pFile->lastErrno = errno;
    rc = SQLITE_IOERR_CLOSE;
  }
  
  /* got it, set the type and return ok */
  pFile->eFileLock = eFileLock;
  return rc;
}

/*
................................................................................
        pFile->eFileLock = NO_LOCK;
      }
    }
    if( rc==SQLITE_OK ){
      pInode->nLock--;
      assert( pInode->nLock>=0 );
      if( pInode->nLock==0 ){
        rc = closePendingFds(pFile);
      }
    }
  }
  
  unixLeaveMutex();
  if( rc==SQLITE_OK ) pFile->eFileLock = eFileLock;
  return rc;
................................................................................
 ** Lower the locking level on file descriptor pFile to eFileLock.  eFileLock
 ** must be either NO_LOCK or SHARED_LOCK.
 **
 ** If the locking level of the file descriptor is already at or below
 ** the requested locking level, this routine is a no-op.
 */
static int nfsUnlock(sqlite3_file *id, int eFileLock){
  return _posixUnlock(id, eFileLock, 1);
}

#endif /* defined(__APPLE__) && SQLITE_ENABLE_LOCKING_STYLE */
/*
** The code above is the NFS lock implementation.  The code is specific
** to MacOSX and does not work on other unix platforms.  No alternative
** is available.  
................................................................................
static int seekAndRead(unixFile *id, sqlite3_int64 offset, void *pBuf, int cnt){
  int got;
#if (!defined(USE_PREAD) && !defined(USE_PREAD64))
  i64 newOffset;
#endif
  TIMER_START;
#if defined(USE_PREAD)
  do{ got = pread(id->h, pBuf, cnt, offset); }while( got<0 && errno==EINTR );
  SimulateIOError( got = -1 );
#elif defined(USE_PREAD64)
  do{ got = pread64(id->h, pBuf, cnt, offset); }while( got<0 && errno==EINTR );
  SimulateIOError( got = -1 );
#else
  newOffset = lseek(id->h, offset, SEEK_SET);
  SimulateIOError( newOffset-- );
  if( newOffset!=offset ){
    if( newOffset == -1 ){
      ((unixFile*)id)->lastErrno = errno;
    }else{
      ((unixFile*)id)->lastErrno = 0;			
    }
    return -1;
  }
  do{ got = read(id->h, pBuf, cnt); }while( got<0 && errno==EINTR );
#endif
  TIMER_END;
  if( got<0 ){
    ((unixFile*)id)->lastErrno = errno;
  }
  OSTRACE(("READ    %-3d %5d %7lld %llu\n", id->h, got, offset, TIMER_ELAPSED));
  return got;
................................................................................
static int seekAndWrite(unixFile *id, i64 offset, const void *pBuf, int cnt){
  int got;
#if (!defined(USE_PREAD) && !defined(USE_PREAD64))
  i64 newOffset;
#endif
  TIMER_START;
#if defined(USE_PREAD)
  do{ got = pwrite(id->h, pBuf, cnt, offset); }while( got<0 && errno==EINTR );
#elif defined(USE_PREAD64)
  do{ got = pwrite64(id->h, pBuf, cnt, offset); }while( got<0 && errno==EINTR );
#else
  newOffset = lseek(id->h, offset, SEEK_SET);
  if( newOffset!=offset ){
    if( newOffset == -1 ){
      ((unixFile*)id)->lastErrno = errno;
    }else{
      ((unixFile*)id)->lastErrno = 0;			
    }
    return -1;
  }
  do{ got = write(id->h, pBuf, cnt); }while( got<0 && errno==EINTR );
#endif
  TIMER_END;
  if( got<0 ){
    ((unixFile*)id)->lastErrno = errno;
  }

  OSTRACE(("WRITE   %-3d %5d %7lld %llu\n", id->h, got, offset, TIMER_ELAPSED));
................................................................................
  /* If we compiled with the SQLITE_NO_SYNC flag, then syncing is a
  ** no-op
  */
#ifdef SQLITE_NO_SYNC
  rc = SQLITE_OK;
#elif HAVE_FULLFSYNC
  if( fullSync ){
    rc = fcntl(fd, F_FULLFSYNC, 0);
  }else{
    rc = 1;
  }
  /* If the FULLFSYNC failed, fall back to attempting an fsync().
  ** It shouldn't be possible for fullfsync to fail on the local 
  ** file system (on OSX), so failure indicates that FULLFSYNC
  ** isn't supported for this file system. So, attempt an fsync 
................................................................................
  rc = full_fsync(pFile->h, isFullsync, isDataOnly);
  SimulateIOError( rc=1 );
  if( rc ){
    pFile->lastErrno = errno;
    return unixLogError(SQLITE_IOERR_FSYNC, "full_fsync", pFile->zPath);
  }
  if( pFile->dirfd>=0 ){
    int err;
    OSTRACE(("DIRSYNC %-3d (have_fullfsync=%d fullsync=%d)\n", pFile->dirfd,
            HAVE_FULLFSYNC, isFullsync));
#ifndef SQLITE_DISABLE_DIRSYNC
    /* The directory sync is only attempted if full_fsync is
    ** turned off or unavailable.  If a full_fsync occurred above,
    ** then the directory sync is superfluous.
    */
................................................................................
       ** A failed directory sync is not a big deal.  So it seems
       ** better to ignore the error.  Ticket #1657
       */
       /* pFile->lastErrno = errno; */
       /* return SQLITE_IOERR; */
    }
#endif
    err = close(pFile->dirfd); /* Only need to sync once, so close the */
    if( err==0 ){              /* directory when we are done */
      pFile->dirfd = -1;
    }else{
      pFile->lastErrno = errno;
      rc = unixLogError(SQLITE_IOERR_DIR_CLOSE, "close", pFile->zPath);
    }
  }
  return rc;
}

/*
** Truncate an open file to a specified size
*/
................................................................................
/*
** Determine the current size of a file in bytes
*/
static int unixFileSize(sqlite3_file *id, i64 *pSize){
  int rc;
  struct stat buf;
  assert( id );
  rc = fstat(((unixFile*)id)->h, &buf);
  SimulateIOError( rc=1 );
  if( rc!=0 ){
    ((unixFile*)id)->lastErrno = errno;
    return SQLITE_IOERR_FSTAT;
  }
  *pSize = buf.st_size;

................................................................................
** SQLITE_FCNTL_SIZE_HINT operation is a no-op for Unix.
*/
static int fcntlSizeHint(unixFile *pFile, i64 nByte){
  if( pFile->szChunk ){
    i64 nSize;                    /* Required file size */
    struct stat buf;              /* Used to hold return values of fstat() */
   
    if( fstat(pFile->h, &buf) ) return SQLITE_IOERR_FSTAT;

    nSize = ((nByte+pFile->szChunk-1) / pFile->szChunk) * pFile->szChunk;
    if( nSize>(i64)buf.st_size ){
#if defined(HAVE_POSIX_FALLOCATE) && HAVE_POSIX_FALLOCATE
      int rc;
      do{
        rc = posix_fallocate(pFile-.h, buf.st_size, nSize-buf.st_size;
      }while( rc<0 && errno=EINTR );
      if( rc ) return SQLITE_IOERR_WRITE;
#else
      /* If the OS does not have posix_fallocate(), fake it. First use
      ** ftruncate() to set the file size, then write a single byte to
      ** the last byte in each block within the extended region. This
      ** is the same technique used by glibc to implement posix_fallocate()
................................................................................

  /* Shared locks never span more than one byte */
  assert( n==1 || lockType!=F_RDLCK );

  /* Locks are within range */
  assert( n>=1 && n<SQLITE_SHM_NLOCK );


  /* Initialize the locking parameters */
  memset(&f, 0, sizeof(f));
  f.l_type = lockType;
  f.l_whence = SEEK_SET;
  f.l_start = ofst;
  f.l_len = n;

  rc = fcntl(pShmNode->h, F_SETLK, &f);
  rc = (rc!=(-1)) ? SQLITE_OK : SQLITE_BUSY;


  /* Update the global lock state and do debug tracing */
#ifdef SQLITE_DEBUG
  { u16 mask;
  OSTRACE(("SHM-LOCK "));
  mask = (1<<(ofst+n)) - (1<<ofst);
  if( rc==SQLITE_OK ){
................................................................................
  unixShmNode *p = pFd->pInode->pShmNode;
  assert( unixMutexHeld() );
  if( p && p->nRef==0 ){
    int i;
    assert( p->pInode==pFd->pInode );
    if( p->mutex ) sqlite3_mutex_free(p->mutex);
    for(i=0; i<p->nRegion; i++){

      munmap(p->apRegion[i], p->szRegion);


    }

    sqlite3_free(p->apRegion);
    if( p->h>=0 ) close(p->h);



    p->pInode->pShmNode = 0;
    sqlite3_free(p);
  }
}

/*
** Open a shared-memory area associated with open database file pDbFd.  
................................................................................
** same database file at the same time, database corruption will likely
** result. The SQLITE_SHM_DIRECTORY compile-time option is considered
** "unsupported" and may go away in a future SQLite release.
**
** When opening a new shared-memory file, if no other instances of that
** file are currently open, in this process or in other processes, then
** the file must be truncated to zero length or have its header cleared.






*/
static int unixOpenSharedMemory(unixFile *pDbFd){
  struct unixShm *p = 0;          /* The connection to be opened */
  struct unixShmNode *pShmNode;   /* The underlying mmapped file */
  int rc;                         /* Result code */
  unixInodeInfo *pInode;          /* The inode of fd */
  char *zShmFilename;             /* Name of the file used for SHM */
................................................................................
    struct stat sStat;                 /* fstat() info for database file */

    /* Call fstat() to figure out the permissions on the database file. If
    ** a new *-shm file is created, an attempt will be made to create it
    ** with the same permissions. The actual permissions the file is created
    ** with are subject to the current umask setting.
    */
    if( fstat(pDbFd->h, &sStat) ){
      rc = SQLITE_IOERR_FSTAT;
      goto shm_open_err;
    }

#ifdef SQLITE_SHM_DIRECTORY
    nShmFilename = sizeof(SQLITE_SHM_DIRECTORY) + 30;
#else
................................................................................
    pShmNode->pInode = pDbFd->pInode;
    pShmNode->mutex = sqlite3_mutex_alloc(SQLITE_MUTEX_FAST);
    if( pShmNode->mutex==0 ){
      rc = SQLITE_NOMEM;
      goto shm_open_err;
    }



    pShmNode->h = open(zShmFilename, O_RDWR|O_CREAT, (sStat.st_mode & 0777));
    if( pShmNode->h<0 ){
      rc = unixLogError(SQLITE_CANTOPEN_BKPT, "open", zShmFilename);
      goto shm_open_err;
    }

    /* Check to see if another process is holding the dead-man switch.
    ** If not, truncate the file to zero length. 
    */
    rc = SQLITE_OK;
    if( unixShmSystemLock(pShmNode, F_WRLCK, UNIX_SHM_DMS, 1)==SQLITE_OK ){
      if( robust_ftruncate(pShmNode->h, 0) ){
        rc = unixLogError(SQLITE_IOERR_SHMOPEN, "ftruncate", zShmFilename);
      }
    }
    if( rc==SQLITE_OK ){
      rc = unixShmSystemLock(pShmNode, F_RDLCK, UNIX_SHM_DMS, 1);
    }
    if( rc ) goto shm_open_err;

  }

  /* Make the new connection a child of the unixShmNode */
  p->pShmNode = pShmNode;
#ifdef SQLITE_DEBUG
  p->id = pShmNode->nextShmId++;
#endif
................................................................................
    if( rc!=SQLITE_OK ) return rc;
  }

  p = pDbFd->pShm;
  pShmNode = p->pShmNode;
  sqlite3_mutex_enter(pShmNode->mutex);
  assert( szRegion==pShmNode->szRegion || pShmNode->nRegion==0 );




  if( pShmNode->nRegion<=iRegion ){
    char **apNew;                      /* New apRegion[] array */
    int nByte = (iRegion+1)*szRegion;  /* Minimum required file size */
    struct stat sStat;                 /* Used by fstat() */

    pShmNode->szRegion = szRegion;


    /* The requested region is not mapped into this processes address space.
    ** Check to see if it has been allocated (i.e. if the wal-index file is
    ** large enough to contain the requested region).
    */
    if( fstat(pShmNode->h, &sStat) ){
      rc = SQLITE_IOERR_SHMSIZE;
      goto shmpage_out;
    }

    if( sStat.st_size<nByte ){
      /* The requested memory region does not exist. If bExtend is set to
      ** false, exit early. *pp will be set to NULL and SQLITE_OK returned.
      **
      ** Alternatively, if bExtend is true, use ftruncate() to allocate
      ** the requested memory region.
      */
      if( !bExtend ) goto shmpage_out;
      if( robust_ftruncate(pShmNode->h, nByte) ){
        rc = unixLogError(SQLITE_IOERR_SHMSIZE,"ftruncate",pShmNode->zFilename);

        goto shmpage_out;
      }

    }

    /* Map the requested memory region into this processes address space. */
    apNew = (char **)sqlite3_realloc(
        pShmNode->apRegion, (iRegion+1)*sizeof(char *)
    );
    if( !apNew ){
      rc = SQLITE_IOERR_NOMEM;
      goto shmpage_out;
    }
    pShmNode->apRegion = apNew;
    while(pShmNode->nRegion<=iRegion){


      void *pMem = mmap(0, szRegion, PROT_READ|PROT_WRITE, 
          MAP_SHARED, pShmNode->h, pShmNode->nRegion*szRegion
      );
      if( pMem==MAP_FAILED ){
        rc = SQLITE_IOERR;
        goto shmpage_out;








      }
      pShmNode->apRegion[pShmNode->nRegion] = pMem;
      pShmNode->nRegion++;
    }
  }

shmpage_out:
................................................................................
  assert( ofst>=0 && ofst+n<=SQLITE_SHM_NLOCK );
  assert( n>=1 );
  assert( flags==(SQLITE_SHM_LOCK | SQLITE_SHM_SHARED)
       || flags==(SQLITE_SHM_LOCK | SQLITE_SHM_EXCLUSIVE)
       || flags==(SQLITE_SHM_UNLOCK | SQLITE_SHM_SHARED)
       || flags==(SQLITE_SHM_UNLOCK | SQLITE_SHM_EXCLUSIVE) );
  assert( n==1 || (flags & SQLITE_SHM_EXCLUSIVE)!=0 );



  mask = (1<<(ofst+n)) - (1<<ofst);
  assert( n>1 || mask==(1<<ofst) );
  sqlite3_mutex_enter(pShmNode->mutex);
  if( flags & SQLITE_SHM_UNLOCK ){
    u16 allMask = 0; /* Mask of locks held by siblings */

................................................................................

  /* If pShmNode->nRef has reached 0, then close the underlying
  ** shared-memory file, too */
  unixEnterMutex();
  assert( pShmNode->nRef>0 );
  pShmNode->nRef--;
  if( pShmNode->nRef==0 ){
    if( deleteFlag ) unlink(pShmNode->zFilename);
    unixShmPurge(pDbFd);
  }
  unixLeaveMutex();

  return SQLITE_OK;
}

................................................................................
  ** Test byte-range lock using fcntl(). If the call succeeds, 
  ** assume that the file-system supports POSIX style locks. 
  */
  lockInfo.l_len = 1;
  lockInfo.l_start = 0;
  lockInfo.l_whence = SEEK_SET;
  lockInfo.l_type = F_RDLCK;
  if( fcntl(pNew->h, F_GETLK, &lockInfo)!=-1 ) {
    if( strcmp(fsInfo.f_fstypename, "nfs")==0 ){
      return &nfsIoMethods;
    } else {
      return &posixIoMethods;
    }
  }else{
    return &dotlockIoMethods;
................................................................................
  /* Test if fcntl() is supported and use POSIX style locks.
  ** Otherwise fall back to the named semaphore method.
  */
  lockInfo.l_len = 1;
  lockInfo.l_start = 0;
  lockInfo.l_whence = SEEK_SET;
  lockInfo.l_type = F_RDLCK;
  if( fcntl(pNew->h, F_GETLK, &lockInfo)!=-1 ) {
    return &posixIoMethods;
  }else{
    return &semIoMethods;
  }
}
static const sqlite3_io_methods 
  *(*const autolockIoFinder)(const char*,unixFile*) = autolockIoFinderImpl;
................................................................................
static int fillInUnixFile(
  sqlite3_vfs *pVfs,      /* Pointer to vfs object */
  int h,                  /* Open file descriptor of file being opened */
  int dirfd,              /* Directory file descriptor */
  sqlite3_file *pId,      /* Write to the unixFile structure here */
  const char *zFilename,  /* Name of the file being opened */
  int noLock,             /* Omit locking if true */
  int isDelete            /* Delete on close if true */

){
  const sqlite3_io_methods *pLockingStyle;
  unixFile *pNew = (unixFile *)pId;
  int rc = SQLITE_OK;

  assert( pNew->pInode==NULL );

................................................................................
#else
  assert( zFilename==0 || zFilename[0]=='/' );
#endif

  OSTRACE(("OPEN    %-3d %s\n", h, zFilename));
  pNew->h = h;
  pNew->dirfd = dirfd;
  pNew->fileFlags = 0;
  pNew->zPath = zFilename;









#if OS_VXWORKS
  pNew->pId = vxworksFindFileId(zFilename);
  if( pNew->pId==0 ){
    noLock = 1;
    rc = SQLITE_NOMEM;
  }
................................................................................
      ** handle h - as it is guaranteed that no posix locks will be released
      ** by doing so.
      **
      ** If scenario (a) caused the error then things are not so safe. The
      ** implicit assumption here is that if fstat() fails, things are in
      ** such bad shape that dropping a lock or two doesn't matter much.
      */
      close(h);
      h = -1;
    }
    unixLeaveMutex();
  }

#if SQLITE_ENABLE_LOCKING_STYLE && defined(__APPLE__)
  else if( pLockingStyle == &afpIoMethods ){
................................................................................
      pCtx->dbPath = zFilename;
      pCtx->reserved = 0;
      srandomdev();
      unixEnterMutex();
      rc = findInodeInfo(pNew, &pNew->pInode);
      if( rc!=SQLITE_OK ){
        sqlite3_free(pNew->lockingContext);
        close(h);
        h = -1;
      }
      unixLeaveMutex();        
    }
  }
#endif

................................................................................
    unixLeaveMutex();
  }
#endif
  
  pNew->lastErrno = 0;
#if OS_VXWORKS
  if( rc!=SQLITE_OK ){
    if( h>=0 ) close(h);
    h = -1;
    unlink(zFilename);
    isDelete = 0;
  }
  pNew->isDelete = isDelete;
#endif
  if( rc!=SQLITE_OK ){
    if( dirfd>=0 ) close(dirfd); /* silent leak if fail, already in error */
    if( h>=0 ) close(h);
  }else{
    pNew->pMethod = pLockingStyle;
    OpenCounter(+1);
  }
  return rc;
}

................................................................................
  int fd = -1;
  char zDirname[MAX_PATHNAME+1];

  sqlite3_snprintf(MAX_PATHNAME, zDirname, "%s", zFilename);
  for(ii=(int)strlen(zDirname); ii>1 && zDirname[ii]!='/'; ii--);
  if( ii>0 ){
    zDirname[ii] = '\0';
    fd = open(zDirname, O_RDONLY|O_BINARY, 0);
    if( fd>=0 ){
#ifdef FD_CLOEXEC
      fcntl(fd, F_SETFD, fcntl(fd, F_GETFD, 0) | FD_CLOEXEC);
#endif
      OSTRACE(("OPENDIR %-3d %s\n", fd, zDirname));
    }
  }
  *pFd = fd;
  return (fd>=0?SQLITE_OK:unixLogError(SQLITE_CANTOPEN_BKPT, "open", zDirname));
}
................................................................................
  struct stat buf;
  const char *zDir = 0;

  azDirs[0] = sqlite3_temp_directory;
  if( !azDirs[1] ) azDirs[1] = getenv("TMPDIR");
  for(i=0; i<sizeof(azDirs)/sizeof(azDirs[0]); zDir=azDirs[i++]){
    if( zDir==0 ) continue;
    if( stat(zDir, &buf) ) continue;
    if( !S_ISDIR(buf.st_mode) ) continue;
    if( access(zDir, 07) ) continue;
    break;
  }
  return zDir;
}

/*
** Create a temporary file name in zBuf.  zBuf must be allocated
................................................................................
    sqlite3_snprintf(nBuf-17, zBuf, "%s/"SQLITE_TEMP_FILE_PREFIX, zDir);
    j = (int)strlen(zBuf);
    sqlite3_randomness(15, &zBuf[j]);
    for(i=0; i<15; i++, j++){
      zBuf[j] = (char)zChars[ ((unsigned char)zBuf[j])%(sizeof(zChars)-1) ];
    }
    zBuf[j] = 0;
  }while( access(zBuf,0)==0 );
  return SQLITE_OK;
}

#if SQLITE_ENABLE_LOCKING_STYLE && defined(__APPLE__)
/*
** Routine to transform a unixFile into a proxy-locking unixFile.
** Implementation in the proxy-lock division, but used by unixOpen()
................................................................................
    mode_t openMode;              /* Permissions to create file with */
    rc = findCreateFileMode(zName, flags, &openMode);
    if( rc!=SQLITE_OK ){
      assert( !p->pUnused );
      assert( eType==SQLITE_OPEN_WAL || eType==SQLITE_OPEN_MAIN_JOURNAL );
      return rc;
    }
    fd = open(zName, openFlags, openMode);
    OSTRACE(("OPENX   %-3d %s 0%o\n", fd, zName, openFlags));
    if( fd<0 && errno!=EISDIR && isReadWrite && !isExclusive ){
      /* Failed to open the file for read/write access. Try read-only. */
      flags &= ~(SQLITE_OPEN_READWRITE|SQLITE_OPEN_CREATE);
      openFlags &= ~(O_RDWR|O_CREAT);
      flags |= SQLITE_OPEN_READONLY;
      openFlags |= O_RDONLY;

      fd = open(zName, openFlags, openMode);
    }
    if( fd<0 ){
      rc = unixLogError(SQLITE_CANTOPEN_BKPT, "open", zName);
      goto open_finished;
    }
  }
  assert( fd>=0 );
................................................................................
    rc = openDirectory(zPath, &dirfd);
    if( rc!=SQLITE_OK ){
      /* It is safe to close fd at this point, because it is guaranteed not
      ** to be open on a database file. If it were open on a database file,
      ** it would not be safe to close as this would release any locks held
      ** on the file by this process.  */
      assert( eType!=SQLITE_OPEN_MAIN_DB );
      close(fd);             /* silently leak if fail, already in error */
      goto open_finished;
    }
  }

#ifdef FD_CLOEXEC
  fcntl(fd, F_SETFD, fcntl(fd, F_GETFD, 0) | FD_CLOEXEC);
#endif

  noLock = eType!=SQLITE_OPEN_MAIN_DB;

  
#if defined(__APPLE__) || SQLITE_ENABLE_LOCKING_STYLE
  struct statfs fsInfo;
  if( fstatfs(fd, &fsInfo) == -1 ){
    ((unixFile*)pFile)->lastErrno = errno;
    if( dirfd>=0 ) close(dirfd); /* silently leak if fail, in error */
    close(fd); /* silently leak if fail, in error */
    return SQLITE_IOERR_ACCESS;
  }
  if (0 == strncmp("msdos", fsInfo.f_fstypename, 5)) {
    ((unixFile*)pFile)->fsFlags |= SQLITE_FSFLAGS_IS_MSDOS;
  }
#endif
  
................................................................................
        ** on that file that are currently holding advisory locks on it,
        ** then the call to close() will cancel those locks. In practice,
        ** we're assuming that statfs() doesn't fail very often. At least
        ** not while other file descriptors opened by the same process on
        ** the same file are working.  */
        p->lastErrno = errno;
        if( dirfd>=0 ){
          close(dirfd); /* silently leak if fail, in error */
        }
        close(fd); /* silently leak if fail, in error */
        rc = SQLITE_IOERR_ACCESS;
        goto open_finished;
      }
      useProxy = !(fsInfo.f_flags&MNT_LOCAL);
    }
    if( useProxy ){
      rc = fillInUnixFile(pVfs, fd, dirfd, pFile, zPath, noLock, isDelete);

      if( rc==SQLITE_OK ){
        rc = proxyTransformUnixFile((unixFile*)pFile, ":auto:");
        if( rc!=SQLITE_OK ){
          /* Use unixClose to clean up the resources added in fillInUnixFile 
          ** and clear all the structure's references.  Specifically, 
          ** pFile->pMethods will be NULL so sqlite3OsClose will be a no-op 
          */
................................................................................
        }
      }
      goto open_finished;
    }
  }
#endif
  
  rc = fillInUnixFile(pVfs, fd, dirfd, pFile, zPath, noLock, isDelete);

open_finished:
  if( rc!=SQLITE_OK ){
    sqlite3_free(p->pUnused);
  }
  return rc;
}

................................................................................
      if( fsync(fd)==-1 )
#else
      if( fsync(fd) )
#endif
      {
        rc = unixLogError(SQLITE_IOERR_DIR_FSYNC, "fsync", zPath);
      }
      if( close(fd)&&!rc ){
        rc = unixLogError(SQLITE_IOERR_DIR_CLOSE, "close", zPath);
      }
    }
  }
#endif
  return rc;
}

/*
................................................................................
    case SQLITE_ACCESS_READ:
      amode = R_OK;
      break;

    default:
      assert(!"Invalid flags argument");
  }
  *pResOut = (access(zPath, amode)==0);
  if( flags==SQLITE_ACCESS_EXISTS && *pResOut ){
    struct stat buf;
    if( 0==stat(zPath, &buf) && buf.st_size==0 ){
      *pResOut = 0;
    }
  }
  return SQLITE_OK;
................................................................................
  UNUSED_PARAMETER(pVfs);

  zOut[nOut-1] = '\0';
  if( zPath[0]=='/' ){
    sqlite3_snprintf(nOut, zOut, "%s", zPath);
  }else{
    int nCwd;
    if( getcwd(zOut, nOut-1)==0 ){
      return unixLogError(SQLITE_CANTOPEN_BKPT, "getcwd", zPath);
    }
    nCwd = (int)strlen(zOut);
    sqlite3_snprintf(nOut-nCwd, &zOut[nCwd], "/%s", zPath);
  }
  return SQLITE_OK;
}
................................................................................
  ** that we always use the same random number sequence.  This makes the
  ** tests repeatable.
  */
  memset(zBuf, 0, nBuf);
#if !defined(SQLITE_TEST)
  {
    int pid, fd;
    fd = open("/dev/urandom", O_RDONLY);
    if( fd<0 ){
      time_t t;
      time(&t);
      memcpy(zBuf, &t, sizeof(t));
      pid = getpid();
      memcpy(&zBuf[sizeof(t)], &pid, sizeof(pid));
      assert( sizeof(t)+sizeof(pid)<=(size_t)nBuf );
      nBuf = sizeof(t) + sizeof(pid);
    }else{
      do{ nBuf = read(fd, zBuf, nBuf); }while( nBuf<0 && errno==EINTR );
      close(fd);
    }
  }
#endif
  return nBuf;
}


................................................................................
  }else{
    pUnused = sqlite3_malloc(sizeof(*pUnused));
    if( !pUnused ){
      return SQLITE_NOMEM;
    }
  }
  if( fd<0 ){
    fd = open(path, openFlags, SQLITE_DEFAULT_FILE_PERMISSIONS);
    terrno = errno;
    if( fd<0 && errno==ENOENT && islockfile ){
      if( proxyCreateLockPath(path) == SQLITE_OK ){
        fd = open(path, openFlags, SQLITE_DEFAULT_FILE_PERMISSIONS);
      }
    }
  }
  if( fd<0 ){
    openFlags = O_RDONLY;
    fd = open(path, openFlags, SQLITE_DEFAULT_FILE_PERMISSIONS);
    terrno = errno;
  }
  if( fd<0 ){
    if( islockfile ){
      return SQLITE_BUSY;
    }
    switch (terrno) {
................................................................................
  memset(pNew, 0, sizeof(unixFile));
  pNew->openFlags = openFlags;
  dummyVfs.pAppData = (void*)&autolockIoFinder;
  pUnused->fd = fd;
  pUnused->flags = openFlags;
  pNew->pUnused = pUnused;
  
  rc = fillInUnixFile(&dummyVfs, fd, dirfd, (sqlite3_file*)pNew, path, 0, 0);
  if( rc==SQLITE_OK ){
    *ppFile = pNew;
    return SQLITE_OK;
  }
end_create_proxy:    
  close(fd); /* silently leak fd if error, we're already in error */
  sqlite3_free(pNew);
  sqlite3_free(pUnused);
  return rc;
}

#ifdef SQLITE_TEST
/* simulate multiple hosts by creating unique hostid file paths */
................................................................................
  pathLen = strlcpy(tPath, cPath, MAXPATHLEN);
  if( pathLen>MAXPATHLEN || pathLen<6 || 
     (strlcpy(&tPath[pathLen-5], "break", 6) != 5) ){
    sqlite3_snprintf(sizeof(errmsg),errmsg,"path error (len %d)",(int)pathLen);
    goto end_breaklock;
  }
  /* read the conch content */
  readLen = pread(conchFile->h, buf, PROXY_MAXCONCHLEN, 0);
  if( readLen<PROXY_PATHINDEX ){
    sqlite3_snprintf(sizeof(errmsg),errmsg,"read error (len %d)",(int)readLen);
    goto end_breaklock;
  }
  /* write it out to the temporary break file */

  fd = open(tPath, (O_RDWR|O_CREAT|O_EXCL), SQLITE_DEFAULT_FILE_PERMISSIONS);
  if( fd<0 ){
    sqlite3_snprintf(sizeof(errmsg), errmsg, "create failed (%d)", errno);
    goto end_breaklock;
  }
  if( pwrite(fd, buf, readLen, 0) != (ssize_t)readLen ){
    sqlite3_snprintf(sizeof(errmsg), errmsg, "write failed (%d)", errno);
    goto end_breaklock;
  }
  if( rename(tPath, cPath) ){
    sqlite3_snprintf(sizeof(errmsg), errmsg, "rename failed (%d)", errno);
    goto end_breaklock;
  }
  rc = 0;
  fprintf(stderr, "broke stale lock on %s\n", cPath);
  close(conchFile->h);
  conchFile->h = fd;
  conchFile->openFlags = O_RDWR | O_CREAT;

end_breaklock:
  if( rc ){
    if( fd>=0 ){
      unlink(tPath);
      close(fd);
    }
    fprintf(stderr, "failed to break stale lock on %s, %s\n", cPath, errmsg);
  }
  return rc;
}

/* Take the requested lock on the conch file and break a stale lock if the 
................................................................................
      /* If the lock failed (busy):
       * 1st try: get the mod time of the conch, wait 0.5s and try again. 
       * 2nd try: fail if the mod time changed or host id is different, wait 
       *           10 sec and try again
       * 3rd try: break the lock unless the mod time has changed.
       */
      struct stat buf;
      if( fstat(conchFile->h, &buf) ){
        pFile->lastErrno = errno;
        return SQLITE_IOERR_LOCK;
      }
      
      if( nTries==1 ){
        conchModTime = buf.st_mtimespec;
        usleep(500000); /* wait 0.5 sec and try the lock again*/
................................................................................
      if( conchModTime.tv_sec != buf.st_mtimespec.tv_sec || 
         conchModTime.tv_nsec != buf.st_mtimespec.tv_nsec ){
        return SQLITE_BUSY;
      }
      
      if( nTries==2 ){  
        char tBuf[PROXY_MAXCONCHLEN];
        int len = pread(conchFile->h, tBuf, PROXY_MAXCONCHLEN, 0);
        if( len<0 ){
          pFile->lastErrno = errno;
          return SQLITE_IOERR_LOCK;
        }
        if( len>PROXY_PATHINDEX && tBuf[0]==(char)PROXY_CONCHVERSION){
          /* don't break the lock if the host id doesn't match */
          if( 0!=memcmp(&tBuf[PROXY_HEADERLEN], myHostID, PROXY_HOSTIDLEN) ){
................................................................................
        rc = unixWrite((sqlite3_file *)conchFile, writeBuffer, writeSize, 0);
        fsync(conchFile->h);
        /* If we created a new conch file (not just updated the contents of a 
         ** valid conch file), try to match the permissions of the database 
         */
        if( rc==SQLITE_OK && createConch ){
          struct stat buf;
          int rc;
          int err = fstat(pFile->h, &buf);
          if( err==0 ){
            mode_t cmode = buf.st_mode&(S_IRUSR|S_IWUSR | S_IRGRP|S_IWGRP |
                                        S_IROTH|S_IWOTH);
            /* try to match the database file R/W permissions, ignore failure */
#ifndef SQLITE_PROXY_DEBUG
            fchmod(conchFile->h, cmode);
#else
            do{
              rc = fchmod(conchFile->h, cmode);
            }while( rc==(-1) && errno==EINTR );
            if( rc!=0 ){
              int code = errno;
              fprintf(stderr, "fchmod %o FAILED with %d %s\n",
                      cmode, code, strerror(code));
            } else {
              fprintf(stderr, "fchmod %o SUCCEDED\n",cmode);
................................................................................
      }
      conchFile->pMethod->xUnlock((sqlite3_file*)conchFile, SHARED_LOCK);
      
    end_takeconch:
      OSTRACE(("TRANSPROXY: CLOSE  %d\n", pFile->h));
      if( rc==SQLITE_OK && pFile->openFlags ){
        if( pFile->h>=0 ){
#ifdef STRICT_CLOSE_ERROR
          if( close(pFile->h) ){
            pFile->lastErrno = errno;
            return SQLITE_IOERR_CLOSE;
          }
#else
          close(pFile->h); /* silently leak fd if fail */
#endif
        }
        pFile->h = -1;
        int fd = open(pCtx->dbPath, pFile->openFlags,
                      SQLITE_DEFAULT_FILE_PERMISSIONS);
        OSTRACE(("TRANSPROXY: OPEN  %d\n", fd));
        if( fd>=0 ){
          pFile->h = fd;
        }else{
          rc=SQLITE_CANTOPEN_BKPT; /* SQLITE_BUSY? proxyTakeConch called
           during locking */
................................................................................
      ** Ugh, since O_RDONLY==0x0000 we test for !O_RDWR since unixOpen asserts
      ** that openFlags will have only one of O_RDONLY or O_RDWR.
      */
      struct statfs fsInfo;
      struct stat conchInfo;
      int goLockless = 0;

      if( stat(pCtx->conchFilePath, &conchInfo) == -1 ) {
        int err = errno;
        if( (err==ENOENT) && (statfs(dbPath, &fsInfo) != -1) ){
          goLockless = (fsInfo.f_flags&MNT_RDONLY) == MNT_RDONLY;
        }
      }
      if( goLockless ){
        pCtx->conchHeld = -1; /* read only FS/ lockless */
................................................................................
  ** Most finders simply return a pointer to a fixed sqlite3_io_methods
  ** object.  But the "autolockIoFinder" available on MacOSX does a little
  ** more than that; it looks at the filesystem type that hosts the 
  ** database file and tries to choose an locking method appropriate for
  ** that filesystem time.
  */
  #define UNIXVFS(VFSNAME, FINDER) {                        \
    2,                    /* iVersion */                    \
    sizeof(unixFile),     /* szOsFile */                    \
    MAX_PATHNAME,         /* mxPathname */                  \
    0,                    /* pNext */                       \
    VFSNAME,              /* zName */                       \
    (void*)&FINDER,       /* pAppData */                    \
    unixOpen,             /* xOpen */                       \
    unixDelete,           /* xDelete */                     \
................................................................................
    unixDlSym,            /* xDlSym */                      \
    unixDlClose,          /* xDlClose */                    \
    unixRandomness,       /* xRandomness */                 \
    unixSleep,            /* xSleep */                      \
    unixCurrentTime,      /* xCurrentTime */                \
    unixGetLastError,     /* xGetLastError */               \
    unixCurrentTimeInt64, /* xCurrentTimeInt64 */           \



  }

  /*
  ** All default VFSes for unix are contained in the following array.
  **
  ** Note that the sqlite3_vfs.pNext field of the VFS object is modified
  ** by the SQLite core when the VFS is registered.  So the following
................................................................................
#if SQLITE_ENABLE_LOCKING_STYLE && (OS_VXWORKS || defined(__APPLE__))
    UNIXVFS("unix",          autolockIoFinder ),
#else
    UNIXVFS("unix",          posixIoFinder ),
#endif
    UNIXVFS("unix-none",     nolockIoFinder ),
    UNIXVFS("unix-dotfile",  dotlockIoFinder ),

#if OS_VXWORKS
    UNIXVFS("unix-namedsem", semIoFinder ),
#endif
#if SQLITE_ENABLE_LOCKING_STYLE
    UNIXVFS("unix-posix",    posixIoFinder ),
#if !OS_VXWORKS
    UNIXVFS("unix-flock",    flockIoFinder ),

typedef struct unixFile unixFile;
struct unixFile {
  sqlite3_io_methods const *pMethod;  /* Always the first entry */
  unixInodeInfo *pInode;              /* Info about locks on this inode */
  int h;                              /* The file descriptor */
  int dirfd;                          /* File descriptor for the directory */
  unsigned char eFileLock;            /* The type of lock held on this fd */
  unsigned char ctrlFlags;            /* Behavioral bits.  UNIXFILE_* flags */
  int lastErrno;                      /* The unix errno from last I/O error */
  void *lockingContext;               /* Locking style specific state */
  UnixUnusedFd *pUnused;              /* Pre-allocated UnixUnusedFd */

  const char *zPath;                  /* Name of the file */
  unixShm *pShm;                      /* Shared memory segment information */
  int szChunk;                        /* Configured by FCNTL_CHUNK_SIZE */
#if SQLITE_ENABLE_LOCKING_STYLE
  int openFlags;                      /* The flags specified at open() */
#endif
#if SQLITE_ENABLE_LOCKING_STYLE || defined(__APPLE__)
................................................................................
  ** it is larger than the struct CrashFile defined in test6.c.
  */
  char aPadding[32];
#endif
};

/*
** Allowed values for the unixFile.ctrlFlags bitmask:
*/
#define UNIXFILE_EXCL   0x01     /* Connections from one process only */
#define UNIXFILE_RDONLY 0x02     /* Connection is read only */

/*
** Include code that is common to all os_*.c files
*/
#include "os_common.h"

/*
................................................................................
#ifndef O_NOFOLLOW
# define O_NOFOLLOW 0
#endif
#ifndef O_BINARY
# define O_BINARY 0
#endif

/*
** The threadid macro resolves to the thread-id or to 0.  Used for
** testing and debugging only.
*/
#if SQLITE_THREADSAFE
#define threadid pthread_self()
#else
#define threadid 0
#endif

/*
** Many system calls are accessed through pointer-to-functions so that
** they may be overridden at runtime to facilitate fault injection during
** testing and sandboxing.  The following array holds the names and pointers
** to all overrideable system calls.
*/
static struct unix_syscall {
  const char *zName;      /* Name of the sytem call */
  void *pCurrent;         /* Current value of the system call */
  void *pDefault;         /* Default value */
} aSyscall[] = {
  { "open",         (void*)open,       0  },
#define osOpen      ((int(*)(const char*,int,int))aSyscall[0].pCurrent)

  { "close",        (void*)close,      0  },
#define osClose     ((int(*)(int))aSyscall[1].pCurrent)

  { "access",       (void*)access,     0  },
#define osAccess    ((int(*)(const char*,int))aSyscall[2].pCurrent)

  { "getcwd",       (void*)getcwd,     0  },
#define osGetcwd    ((char*(*)(char*,size_t))aSyscall[3].pCurrent)

  { "stat",         (void*)stat,       0  },
#define osStat      ((int(*)(const char*,struct stat*))aSyscall[4].pCurrent)

/*
** The DJGPP compiler environment looks mostly like Unix, but it
** lacks the fcntl() system call.  So redefine fcntl() to be something
** that always succeeds.  This means that locking does not occur under
** DJGPP.  But it is DOS - what did you expect?
*/
#ifdef __DJGPP__

  { "fstat",        0,                 0  },
#define osFstat(a,b,c)    0
#else     
  { "fstat",        (void*)fstat,      0  },
#define osFstat     ((int(*)(int,struct stat*))aSyscall[5].pCurrent)
#endif

  { "ftruncate",    (void*)ftruncate,  0  },
#define osFtruncate ((int(*)(int,off_t))aSyscall[6].pCurrent)

  { "fcntl",        (void*)fcntl,      0  },
#define osFcntl     ((int(*)(int,int,...))aSyscall[7].pCurrent)

  { "read",         (void*)read,       0  },
#define osRead      ((ssize_t(*)(int,void*,size_t))aSyscall[8].pCurrent)

#if defined(USE_PREAD) || defined(SQLITE_ENABLE_LOCKING_STYLE)
  { "pread",        (void*)pread,      0  },
#else
  { "pread",        (void*)0,          0  },
#endif
#define osPread     ((ssize_t(*)(int,void*,size_t,off_t))aSyscall[9].pCurrent)

#if defined(USE_PREAD64)
  { "pread64",      (void*)pread64,    0  },
#else
  { "pread64",      (void*)0,          0  },
#endif
#define osPread64   ((ssize_t(*)(int,void*,size_t,off_t))aSyscall[10].pCurrent)

  { "write",        (void*)write,      0  },
#define osWrite     ((ssize_t(*)(int,const void*,size_t))aSyscall[11].pCurrent)

#if defined(USE_PREAD) || defined(SQLITE_ENABLE_LOCKING_STYLE)
  { "pwrite",       (void*)pwrite,     0  },
#else
  { "pwrite",       (void*)0,          0  },
#endif
#define osPwrite    ((ssize_t(*)(int,const void*,size_t,off_t))\
                    aSyscall[12].pCurrent)

#if defined(USE_PREAD64)
  { "pwrite64",     (void*)pwrite64,   0  },
#else
  { "pwrite64",     (void*)0,          0  },
#endif
#define osPwrite64  ((ssize_t(*)(int,const void*,size_t,off_t))\
                    aSyscall[13].pCurrent)

  { "fchmod",       (void*)fchmod,     0  },
#define osFchmod    ((int(*)(int,mode_t))aSyscall[14].pCurrent)

#if defined(HAVE_POSIX_FALLOCATE) && HAVE_POSIX_FALLOCATE
  { "fallocate",    (void*)posix_fallocate,  0 },
#else
  { "fallocate",    (void*)0,                0 },
#endif
#define osFallocate ((int(*)(int,off_t,off_t)aSyscall[15].pCurrent)

}; /* End of the overrideable system calls */

/*


** This is the xSetSystemCall() method of sqlite3_vfs for all of the
** "unix" VFSes.  Return SQLITE_OK opon successfully updating the
** system call pointer, or SQLITE_NOTFOUND if there is no configurable
** system call named zName.
*/
static int unixSetSystemCall(
  sqlite3_vfs *pNotUsed,     /* The VFS pointer.  Not used */
  const char *zName,         /* Name of system call to override */
  void *pNewFunc             /* Pointer to new system call value */
){
  int i;
  int rc = SQLITE_NOTFOUND;
  if( zName==0 ){
    /* If no zName is given, restore all system calls to their default
    ** settings and return NULL
    */
    for(i=0; i<sizeof(aSyscall)/sizeof(aSyscall[0]); i++){
      if( aSyscall[i].pDefault ){
        aSyscall[i].pCurrent = aSyscall[i].pDefault;
        rc = SQLITE_OK;

      }
    }
  }else{


    /* If zName is specified, operate on only the one system call
    ** specified.
    */
    for(i=0; i<sizeof(aSyscall)/sizeof(aSyscall[0]); i++){
      if( strcmp(zName, aSyscall[i].zName)==0 ){
        if( aSyscall[i].pDefault==0 ){
          aSyscall[i].pDefault = aSyscall[i].pCurrent;
        }
        rc = SQLITE_OK;
        if( pNewFunc==0 ) pNewFunc = aSyscall[i].pDefault;
        aSyscall[i].pCurrent = pNewFunc;
        break;
      }
    }
  }
  return rc;
}

/*
** Return the value of a system call.  Return NULL if zName is not a
** recognized system call name.  NULL is also returned if the system call
** is currently undefined.
*/
static void *unixGetSystemCall(sqlite3_vfs *pNotUsed, const char *zName){
  int i;
  for(i=0; i<sizeof(aSyscall)/sizeof(aSyscall[0]); i++){
    if( strcmp(zName, aSyscall[i].zName)==0 ) return aSyscall[i].pCurrent;
  }
  return 0;
}

/*
** Return the name of the first system call after zName.  If zName==NULL
** then return the name of the first system call.  Return NULL if zName
** is the last system call or if zName is not the name of a valid
** system call.
*/
static const char *unixNextSystemCall(sqlite3_vfs *p, const char *zName){
  int i;
  if( zName==0 ){
    i = -1;
  }else{
    for(i=0; i<sizeof(aSyscall)/sizeof(aSyscall[0])-1; i++){
      if( strcmp(zName, aSyscall[0].zName)==0 ) break;
    }
  }
  for(i++; i<sizeof(aSyscall)/sizeof(aSyscall[0]); i++){
    if( aSyscall[0].pCurrent!=0 ) return aSyscall[0].zName;
  }
  return 0;
}

/*
** Retry open() calls that fail due to EINTR
*/
static int robust_open(const char *z, int f, int m){
  int rc;
  do{ rc = osOpen(z,f,m); }while( rc<0 && errno==EINTR );
  return rc;
}

/*
** Helper functions to obtain and relinquish the global mutex. The
** global mutex is used to protect the unixInodeInfo and
** vxworksFileId objects used by this file, all of which may be 
** shared by multiple threads.
**
................................................................................
  int s;
  int savedErrno;
  if( op==F_GETLK ){
    zOpName = "GETLK";
  }else if( op==F_SETLK ){
    zOpName = "SETLK";
  }else{
    s = osFcntl(fd, op, p);
    sqlite3DebugPrintf("fcntl unknown %d %d %d\n", fd, op, s);
    return s;
  }
  if( p->l_type==F_RDLCK ){
    zType = "RDLCK";
  }else if( p->l_type==F_WRLCK ){
    zType = "WRLCK";
  }else if( p->l_type==F_UNLCK ){
    zType = "UNLCK";
  }else{
    assert( 0 );
  }
  assert( p->l_whence==SEEK_SET );
  s = osFcntl(fd, op, p);
  savedErrno = errno;
  sqlite3DebugPrintf("fcntl %d %d %s %s %d %d %d %d\n",
     threadid, fd, zOpName, zType, (int)p->l_start, (int)p->l_len,
     (int)p->l_pid, s);
  if( s==(-1) && op==F_SETLK && (p->l_type==F_RDLCK || p->l_type==F_WRLCK) ){
    struct flock l2;
    l2 = *p;
    osFcntl(fd, F_GETLK, &l2);
    if( l2.l_type==F_RDLCK ){
      zType = "RDLCK";
    }else if( l2.l_type==F_WRLCK ){
      zType = "WRLCK";
    }else if( l2.l_type==F_UNLCK ){
      zType = "UNLCK";
    }else{
................................................................................
    }
    sqlite3DebugPrintf("fcntl-failure-reason: %s %d %d %d\n",
       zType, (int)l2.l_start, (int)l2.l_len, (int)l2.l_pid);
  }
  errno = savedErrno;
  return s;
}
#undef osFcntl
#define osFcntl lockTrace
#endif /* SQLITE_LOCK_TRACE */

/*
** Retry ftruncate() calls that fail due to EINTR
*/

static int robust_ftruncate(int h, sqlite3_int64 sz){
  int rc;
  do{ rc = osFtruncate(h,sz); }while( rc<0 && errno==EINTR );
  return rc;
}





/*
** This routine translates a standard POSIX errno code into something
** useful to the clients of the sqlite3 functions.  Specifically, it is
** intended to translate a variety of "try again" errors into SQLITE_BUSY
** and a variety of "please close the file descriptor NOW" errors into 
** SQLITE_IOERR
................................................................................
** A single inode can have multiple file descriptors, so each unixFile
** structure contains a pointer to an instance of this object and this
** object keeps a count of the number of unixFile pointing to it.
*/
struct unixInodeInfo {
  struct unixFileId fileId;       /* The lookup key */
  int nShared;                    /* Number of SHARED locks held */
  unsigned char eFileLock;        /* One of SHARED_LOCK, RESERVED_LOCK etc. */
  unsigned char bProcessLock;     /* An exclusive process lock is held */
  int nRef;                       /* Number of pointers to this structure */
  unixShmNode *pShmNode;          /* Shared memory associated with this inode */
  int nLock;                      /* Number of outstanding file locks */
  UnixUnusedFd *pUnused;          /* Unused file descriptors to close */
  unixInodeInfo *pNext;           /* List of all unixInodeInfo objects */
  unixInodeInfo *pPrev;           /*    .... doubly linked */
#if defined(SQLITE_ENABLE_LOCKING_STYLE)
................................................................................
**
** The first argument passed to the macro should be the error code that
** will be returned to SQLite (e.g. SQLITE_IOERR_DELETE, SQLITE_CANTOPEN). 
** The two subsequent arguments should be the name of the OS function that
** failed (e.g. "unlink", "open") and the the associated file-system path,
** if any.
*/
#define unixLogError(a,b,c)     unixLogErrorAtLine(a,b,c,__LINE__)
static int unixLogErrorAtLine(
  int errcode,                    /* SQLite error code */
  const char *zFunc,              /* Name of OS function that failed */
  const char *zPath,              /* File path associated with error */
  int iLine                       /* Source line number where error occurred */
){
  char *zErr;                     /* Message from strerror() or equivalent */
  int iErrno = errno;             /* Saved syscall error number */

  /* If this is not a threadsafe build (SQLITE_THREADSAFE==0), then use
  ** the strerror() function to obtain the human-readable error message
  ** equivalent to errno. Otherwise, use strerror_r().
  */ 
#if SQLITE_THREADSAFE && defined(HAVE_STRERROR_R)
  char aErr[80];
................................................................................
  ** available, the error message will often be an empty string. Not a
  ** huge problem. Incorrectly concluding that the GNU version is available 
  ** could lead to a segfault though.
  */
#if defined(STRERROR_R_CHAR_P) || defined(__USE_GNU)
  zErr = 
# endif
  strerror_r(iErrno, aErr, sizeof(aErr)-1);

#elif SQLITE_THREADSAFE
  /* This is a threadsafe build, but strerror_r() is not available. */
  zErr = "";
#else
  /* Non-threadsafe build, use strerror(). */
  zErr = strerror(iErrno);
#endif

  assert( errcode!=SQLITE_OK );
  if( zPath==0 ) zPath = "";
  sqlite3_log(errcode,

      "os_unix.c:%d: (%d) %s(%s) - %s",
      iLine, iErrno, zFunc, zPath, zErr
  );

  return errcode;
}

/*
** Close a file descriptor.
**
** We assume that close() almost always works, since it is only in a
** very sick application or on a very sick platform that it might fail.
** If it does fail, simply leak the file descriptor, but do log the
** error.
**
** Note that it is not safe to retry close() after EINTR since the
** file descriptor might have already been reused by another thread.
** So we don't even try to recover from an EINTR.  Just log the error
** and move on.
*/
static void robust_close(unixFile *pFile, int h, int lineno){
  if( osClose(h) ){
    unixLogErrorAtLine(SQLITE_IOERR_CLOSE, "close",
                       pFile ? pFile->zPath : 0, lineno);
  }
}

/*
** Close all file descriptors accumuated in the unixInodeInfo->pUnused list.






*/ 
static void closePendingFds(unixFile *pFile){

  unixInodeInfo *pInode = pFile->pInode;

  UnixUnusedFd *p;
  UnixUnusedFd *pNext;
  for(p=pInode->pUnused; p; p=pNext){
    pNext = p->pNext;
    robust_close(pFile, p->fd, __LINE__);





    sqlite3_free(p);
  }

  pInode->pUnused = 0;

}

/*
** Release a unixInodeInfo structure previously allocated by findInodeInfo().
**
** The mutex entered using the unixEnterMutex() function must be held
** when this function is called.
................................................................................

  assert( unixMutexHeld() );

  /* Get low-level information about the file that we can used to
  ** create a unique name for the file.
  */
  fd = pFile->h;
  rc = osFstat(fd, &statbuf);
  if( rc!=0 ){
    pFile->lastErrno = errno;
#ifdef EOVERFLOW
    if( pFile->lastErrno==EOVERFLOW ) return SQLITE_NOLFS;
#endif
    return SQLITE_IOERR;
  }
................................................................................
  ** prior to accessing the inode number.  The one byte written is
  ** an ASCII 'S' character which also happens to be the first byte
  ** in the header of every SQLite database.  In this way, if there
  ** is a race condition such that another thread has already populated
  ** the first page of the database, no damage is done.
  */
  if( statbuf.st_size==0 && (pFile->fsFlags & SQLITE_FSFLAGS_IS_MSDOS)!=0 ){
    do{ rc = osWrite(fd, "S", 1); }while( rc<0 && errno==EINTR );
    if( rc!=1 ){
      pFile->lastErrno = errno;
      return SQLITE_IOERR;
    }
    rc = osFstat(fd, &statbuf);
    if( rc!=0 ){
      pFile->lastErrno = errno;
      return SQLITE_IOERR;
    }
  }
#endif

................................................................................
  if( pFile->pInode->eFileLock>SHARED_LOCK ){
    reserved = 1;
  }

  /* Otherwise see if some other process holds it.
  */
#ifndef __DJGPP__
  if( !reserved && !pFile->pInode->bProcessLock ){
    struct flock lock;
    lock.l_whence = SEEK_SET;
    lock.l_start = RESERVED_BYTE;
    lock.l_len = 1;
    lock.l_type = F_WRLCK;
    if (-1 == osFcntl(pFile->h, F_GETLK, &lock)) {
      int tErrno = errno;
      rc = sqliteErrorFromPosixError(tErrno, SQLITE_IOERR_CHECKRESERVEDLOCK);
      pFile->lastErrno = tErrno;
    } else if( lock.l_type!=F_UNLCK ){
      reserved = 1;
    }
  }
................................................................................
  
  unixLeaveMutex();
  OSTRACE(("TEST WR-LOCK %d %d %d (unix)\n", pFile->h, rc, reserved));

  *pResOut = reserved;
  return rc;
}

/*
** Attempt to set a system-lock on the file pFile.  The lock is 
** described by pLock.
**
** If the pFile was opened read/write from unix-excl, then the only lock
** ever obtained is an exclusive lock, and it is obtained exactly once
** the first time any lock is attempted.  All subsequent system locking
** operations become no-ops.  Locking operations still happen internally,
** in order to coordinate access between separate database connections
** within this process, but all of that is handled in memory and the
** operating system does not participate.
**
** This function is a pass-through to fcntl(F_SETLK) if pFile is using
** any VFS other than "unix-excl" or if pFile is opened on "unix-excl"
** and is read-only.
*/
static int unixFileLock(unixFile *pFile, struct flock *pLock){
  int rc;
  unixInodeInfo *pInode = pFile->pInode;
  assert( unixMutexHeld() );
  assert( pInode!=0 );
  if( ((pFile->ctrlFlags & UNIXFILE_EXCL)!=0 || pInode->bProcessLock)
   && ((pFile->ctrlFlags & UNIXFILE_RDONLY)==0)
  ){
    if( pInode->bProcessLock==0 ){
      struct flock lock;
      assert( pInode->nLock==0 );
      lock.l_whence = SEEK_SET;
      lock.l_start = SHARED_FIRST;
      lock.l_len = SHARED_SIZE;
      lock.l_type = F_WRLCK;
      rc = osFcntl(pFile->h, F_SETLK, &lock);
      if( rc<0 ) return rc;
      pInode->bProcessLock = 1;
      pInode->nLock++;
    }else{
      rc = 0;
    }
  }else{
    rc = osFcntl(pFile->h, F_SETLK, pLock);
  }
  return rc;
}

/*
** Lock the file with the lock specified by parameter eFileLock - one
** of the following:
**
**     (1) SHARED_LOCK
**     (2) RESERVED_LOCK
................................................................................
  lock.l_len = 1L;
  lock.l_whence = SEEK_SET;
  if( eFileLock==SHARED_LOCK 
      || (eFileLock==EXCLUSIVE_LOCK && pFile->eFileLock<PENDING_LOCK)
  ){
    lock.l_type = (eFileLock==SHARED_LOCK?F_RDLCK:F_WRLCK);
    lock.l_start = PENDING_BYTE;
    s = unixFileLock(pFile, &lock);
    if( s==(-1) ){
      tErrno = errno;
      rc = sqliteErrorFromPosixError(tErrno, SQLITE_IOERR_LOCK);
      if( IS_LOCK_ERROR(rc) ){
        pFile->lastErrno = tErrno;
      }
      goto end_lock;
................................................................................
  if( eFileLock==SHARED_LOCK ){
    assert( pInode->nShared==0 );
    assert( pInode->eFileLock==0 );

    /* Now get the read-lock */
    lock.l_start = SHARED_FIRST;
    lock.l_len = SHARED_SIZE;
    if( (s = unixFileLock(pFile, &lock))==(-1) ){
      tErrno = errno;
    }
    /* Drop the temporary PENDING lock */
    lock.l_start = PENDING_BYTE;
    lock.l_len = 1L;
    lock.l_type = F_UNLCK;
    if( unixFileLock(pFile, &lock)!=0 ){
      if( s != -1 ){
        /* This could happen with a network mount */
        tErrno = errno; 
        rc = sqliteErrorFromPosixError(tErrno, SQLITE_IOERR_UNLOCK); 
        if( IS_LOCK_ERROR(rc) ){
          pFile->lastErrno = tErrno;
        }
................................................................................
      case EXCLUSIVE_LOCK:
        lock.l_start = SHARED_FIRST;
        lock.l_len = SHARED_SIZE;
        break;
      default:
        assert(0);
    }
    s = unixFileLock(pFile, &lock);
    if( s==(-1) ){
      tErrno = errno;
      rc = sqliteErrorFromPosixError(tErrno, SQLITE_IOERR_LOCK);
      if( IS_LOCK_ERROR(rc) ){
        pFile->lastErrno = tErrno;
      }
    }
................................................................................
** 
** If handleNFSUnlock is true, then on downgrading an EXCLUSIVE_LOCK to SHARED
** the byte range is divided into 2 parts and the first part is unlocked then
** set to a read lock, then the other part is simply unlocked.  This works 
** around a bug in BSD NFS lockd (also seen on MacOSX 10.3+) that fails to 
** remove the write lock on a region when a read lock is set.
*/
static int posixUnlock(sqlite3_file *id, int eFileLock, int handleNFSUnlock){
  unixFile *pFile = (unixFile*)id;
  unixInodeInfo *pInode;
  struct flock lock;
  int rc = SQLITE_OK;
  int h;
  int tErrno;                      /* Error code from system call errors */

................................................................................
    **  2:   [....W]
    **  3:   [RRRRW]
    **  4:   [RRRR.]
    */
    if( eFileLock==SHARED_LOCK ){

#if !defined(__APPLE__) || !SQLITE_ENABLE_LOCKING_STYLE
      (void)handleNFSUnlock;
      assert( handleNFSUnlock==0 );
#endif
#if defined(__APPLE__) && SQLITE_ENABLE_LOCKING_STYLE
      if( handleNFSUnlock ){
        off_t divSize = SHARED_SIZE - 1;
        
        lock.l_type = F_UNLCK;
        lock.l_whence = SEEK_SET;
        lock.l_start = SHARED_FIRST;
        lock.l_len = divSize;
        if( unixFileLock(pFile,, &lock)==(-1) ){
          tErrno = errno;
          rc = sqliteErrorFromPosixError(tErrno, SQLITE_IOERR_UNLOCK);
          if( IS_LOCK_ERROR(rc) ){
            pFile->lastErrno = tErrno;
          }
          goto end_unlock;
        }
        lock.l_type = F_RDLCK;
        lock.l_whence = SEEK_SET;
        lock.l_start = SHARED_FIRST;
        lock.l_len = divSize;
        if( unixFileLock(pFile, &lock)==(-1) ){
          tErrno = errno;
          rc = sqliteErrorFromPosixError(tErrno, SQLITE_IOERR_RDLOCK);
          if( IS_LOCK_ERROR(rc) ){
            pFile->lastErrno = tErrno;
          }
          goto end_unlock;
        }
        lock.l_type = F_UNLCK;
        lock.l_whence = SEEK_SET;
        lock.l_start = SHARED_FIRST+divSize;
        lock.l_len = SHARED_SIZE-divSize;
        if( unixFileLock(pFile, &lock)==(-1) ){
          tErrno = errno;
          rc = sqliteErrorFromPosixError(tErrno, SQLITE_IOERR_UNLOCK);
          if( IS_LOCK_ERROR(rc) ){
            pFile->lastErrno = tErrno;
          }
          goto end_unlock;
        }
................................................................................
      }else
#endif /* defined(__APPLE__) && SQLITE_ENABLE_LOCKING_STYLE */
      {
        lock.l_type = F_RDLCK;
        lock.l_whence = SEEK_SET;
        lock.l_start = SHARED_FIRST;
        lock.l_len = SHARED_SIZE;
        if( unixFileLock(pFile, &lock)==(-1) ){
          tErrno = errno;
          rc = sqliteErrorFromPosixError(tErrno, SQLITE_IOERR_RDLOCK);
          if( IS_LOCK_ERROR(rc) ){
            pFile->lastErrno = tErrno;
          }
          goto end_unlock;
        }
      }
    }
    lock.l_type = F_UNLCK;
    lock.l_whence = SEEK_SET;
    lock.l_start = PENDING_BYTE;
    lock.l_len = 2L;  assert( PENDING_BYTE+1==RESERVED_BYTE );
    if( unixFileLock(pFile, &lock)!=(-1) ){
      pInode->eFileLock = SHARED_LOCK;
    }else{
      tErrno = errno;
      rc = sqliteErrorFromPosixError(tErrno, SQLITE_IOERR_UNLOCK);
      if( IS_LOCK_ERROR(rc) ){
        pFile->lastErrno = tErrno;
      }
................................................................................
    if( pInode->nShared==0 ){
      lock.l_type = F_UNLCK;
      lock.l_whence = SEEK_SET;
      lock.l_start = lock.l_len = 0L;
      SimulateIOErrorBenign(1);
      SimulateIOError( h=(-1) )
      SimulateIOErrorBenign(0);
      if( unixFileLock(pFile, &lock)!=(-1) ){
        pInode->eFileLock = NO_LOCK;
      }else{
        tErrno = errno;
        rc = sqliteErrorFromPosixError(tErrno, SQLITE_IOERR_UNLOCK);
        if( IS_LOCK_ERROR(rc) ){
          pFile->lastErrno = tErrno;
        }
................................................................................
    /* Decrement the count of locks against this same file.  When the
    ** count reaches zero, close any other file descriptors whose close
    ** was deferred because of outstanding locks.
    */
    pInode->nLock--;
    assert( pInode->nLock>=0 );
    if( pInode->nLock==0 ){
      closePendingFds(pFile);



    }
  }
	
end_unlock:
  unixLeaveMutex();
  if( rc==SQLITE_OK ) pFile->eFileLock = eFileLock;
  return rc;
................................................................................
** Lower the locking level on file descriptor pFile to eFileLock.  eFileLock
** must be either NO_LOCK or SHARED_LOCK.
**
** If the locking level of the file descriptor is already at or below
** the requested locking level, this routine is a no-op.
*/
static int unixUnlock(sqlite3_file *id, int eFileLock){
  return posixUnlock(id, eFileLock, 0);
}

/*
** This function performs the parts of the "close file" operation 
** common to all locking schemes. It closes the directory and file
** handles, if they are valid, and sets all fields of the unixFile
** structure to 0.
................................................................................
** even on VxWorks.  A mutex will be acquired on VxWorks by the
** vxworksReleaseFileId() routine.
*/
static int closeUnixFile(sqlite3_file *id){
  unixFile *pFile = (unixFile*)id;
  if( pFile ){
    if( pFile->dirfd>=0 ){
      robust_close(pFile, pFile->dirfd, __LINE__);




      pFile->dirfd=-1;
    }

    if( pFile->h>=0 ){
      robust_close(pFile, pFile->h, __LINE__);
      pFile->h = -1;




    }
#if OS_VXWORKS
    if( pFile->pId ){
      if( pFile->isDelete ){
        unlink(pFile->pId->zCanonicalName);
      }
      vxworksReleaseFileId(pFile->pId);
................................................................................
*/
static int unixClose(sqlite3_file *id){
  int rc = SQLITE_OK;
  if( id ){
    unixFile *pFile = (unixFile *)id;
    unixUnlock(id, NO_LOCK);
    unixEnterMutex();
    assert( pFile->pInode==0 || pFile->pInode->nLock>0
            || pFile->pInode->bProcessLock==0 );
    if( pFile->pInode && pFile->pInode->nLock ){
      /* If there are outstanding locks, do not actually close the file just
      ** yet because that would clear those locks.  Instead, add the file
      ** descriptor to pInode->pUnused list.  It will be automatically closed 
      ** when the last lock is cleared.
      */
      setPendingFd(pFile);
................................................................................
  if( pFile->eFileLock>SHARED_LOCK ){
    /* Either this connection or some other connection in the same process
    ** holds a lock on the file.  No need to check further. */
    reserved = 1;
  }else{
    /* The lock is held if and only if the lockfile exists */
    const char *zLockFile = (const char*)pFile->lockingContext;
    reserved = osAccess(zLockFile, 0)==0;
  }
  OSTRACE(("TEST WR-LOCK %d %d %d (dotlock)\n", pFile->h, rc, reserved));
  *pResOut = reserved;
  return rc;
}

/*
................................................................................
    /* Always update the timestamp on the old file */
    utimes(zLockFile, NULL);
#endif
    return SQLITE_OK;
  }
  
  /* grab an exclusive lock */
  fd = robust_open(zLockFile,O_RDONLY|O_CREAT|O_EXCL,0600);
  if( fd<0 ){
    /* failed to open/create the file, someone else may have stolen the lock */
    int tErrno = errno;
    if( EEXIST == tErrno ){
      rc = SQLITE_BUSY;
    } else {
      rc = sqliteErrorFromPosixError(tErrno, SQLITE_IOERR_LOCK);
      if( IS_LOCK_ERROR(rc) ){
        pFile->lastErrno = tErrno;
      }
    }
    return rc;
  } 
  robust_close(pFile, fd, __LINE__);



  
  /* got it, set the type and return ok */
  pFile->eFileLock = eFileLock;
  return rc;
}

/*
................................................................................
        pFile->eFileLock = NO_LOCK;
      }
    }
    if( rc==SQLITE_OK ){
      pInode->nLock--;
      assert( pInode->nLock>=0 );
      if( pInode->nLock==0 ){
        closePendingFds(pFile);
      }
    }
  }
  
  unixLeaveMutex();
  if( rc==SQLITE_OK ) pFile->eFileLock = eFileLock;
  return rc;
................................................................................
 ** Lower the locking level on file descriptor pFile to eFileLock.  eFileLock
 ** must be either NO_LOCK or SHARED_LOCK.
 **
 ** If the locking level of the file descriptor is already at or below
 ** the requested locking level, this routine is a no-op.
 */
static int nfsUnlock(sqlite3_file *id, int eFileLock){
  return posixUnlock(id, eFileLock, 1);
}

#endif /* defined(__APPLE__) && SQLITE_ENABLE_LOCKING_STYLE */
/*
** The code above is the NFS lock implementation.  The code is specific
** to MacOSX and does not work on other unix platforms.  No alternative
** is available.  
................................................................................
static int seekAndRead(unixFile *id, sqlite3_int64 offset, void *pBuf, int cnt){
  int got;
#if (!defined(USE_PREAD) && !defined(USE_PREAD64))
  i64 newOffset;
#endif
  TIMER_START;
#if defined(USE_PREAD)
  do{ got = osPread(id->h, pBuf, cnt, offset); }while( got<0 && errno==EINTR );
  SimulateIOError( got = -1 );
#elif defined(USE_PREAD64)
  do{ got = osPread64(id->h, pBuf, cnt, offset); }while( got<0 && errno==EINTR);
  SimulateIOError( got = -1 );
#else
  newOffset = lseek(id->h, offset, SEEK_SET);
  SimulateIOError( newOffset-- );
  if( newOffset!=offset ){
    if( newOffset == -1 ){
      ((unixFile*)id)->lastErrno = errno;
    }else{
      ((unixFile*)id)->lastErrno = 0;			
    }
    return -1;
  }
  do{ got = osRead(id->h, pBuf, cnt); }while( got<0 && errno==EINTR );
#endif
  TIMER_END;
  if( got<0 ){
    ((unixFile*)id)->lastErrno = errno;
  }
  OSTRACE(("READ    %-3d %5d %7lld %llu\n", id->h, got, offset, TIMER_ELAPSED));
  return got;
................................................................................
static int seekAndWrite(unixFile *id, i64 offset, const void *pBuf, int cnt){
  int got;
#if (!defined(USE_PREAD) && !defined(USE_PREAD64))
  i64 newOffset;
#endif
  TIMER_START;
#if defined(USE_PREAD)
  do{ got = osPwrite(id->h, pBuf, cnt, offset); }while( got<0 && errno==EINTR );
#elif defined(USE_PREAD64)
  do{ got = osPwrite64(id->h, pBuf, cnt, offset);}while( got<0 && errno==EINTR);
#else
  newOffset = lseek(id->h, offset, SEEK_SET);
  if( newOffset!=offset ){
    if( newOffset == -1 ){
      ((unixFile*)id)->lastErrno = errno;
    }else{
      ((unixFile*)id)->lastErrno = 0;			
    }
    return -1;
  }
  do{ got = osWrite(id->h, pBuf, cnt); }while( got<0 && errno==EINTR );
#endif
  TIMER_END;
  if( got<0 ){
    ((unixFile*)id)->lastErrno = errno;
  }

  OSTRACE(("WRITE   %-3d %5d %7lld %llu\n", id->h, got, offset, TIMER_ELAPSED));
................................................................................
  /* If we compiled with the SQLITE_NO_SYNC flag, then syncing is a
  ** no-op
  */
#ifdef SQLITE_NO_SYNC
  rc = SQLITE_OK;
#elif HAVE_FULLFSYNC
  if( fullSync ){
    rc = osFcntl(fd, F_FULLFSYNC, 0);
  }else{
    rc = 1;
  }
  /* If the FULLFSYNC failed, fall back to attempting an fsync().
  ** It shouldn't be possible for fullfsync to fail on the local 
  ** file system (on OSX), so failure indicates that FULLFSYNC
  ** isn't supported for this file system. So, attempt an fsync 
................................................................................
  rc = full_fsync(pFile->h, isFullsync, isDataOnly);
  SimulateIOError( rc=1 );
  if( rc ){
    pFile->lastErrno = errno;
    return unixLogError(SQLITE_IOERR_FSYNC, "full_fsync", pFile->zPath);
  }
  if( pFile->dirfd>=0 ){

    OSTRACE(("DIRSYNC %-3d (have_fullfsync=%d fullsync=%d)\n", pFile->dirfd,
            HAVE_FULLFSYNC, isFullsync));
#ifndef SQLITE_DISABLE_DIRSYNC
    /* The directory sync is only attempted if full_fsync is
    ** turned off or unavailable.  If a full_fsync occurred above,
    ** then the directory sync is superfluous.
    */
................................................................................
       ** A failed directory sync is not a big deal.  So it seems
       ** better to ignore the error.  Ticket #1657
       */
       /* pFile->lastErrno = errno; */
       /* return SQLITE_IOERR; */
    }
#endif
    /* Only need to sync once, so close the  directory when we are done */
    robust_close(pFile, pFile->dirfd, __LINE__);
    pFile->dirfd = -1;




  }
  return rc;
}

/*
** Truncate an open file to a specified size
*/
................................................................................
/*
** Determine the current size of a file in bytes
*/
static int unixFileSize(sqlite3_file *id, i64 *pSize){
  int rc;
  struct stat buf;
  assert( id );
  rc = osFstat(((unixFile*)id)->h, &buf);
  SimulateIOError( rc=1 );
  if( rc!=0 ){
    ((unixFile*)id)->lastErrno = errno;
    return SQLITE_IOERR_FSTAT;
  }
  *pSize = buf.st_size;

................................................................................
** SQLITE_FCNTL_SIZE_HINT operation is a no-op for Unix.
*/
static int fcntlSizeHint(unixFile *pFile, i64 nByte){
  if( pFile->szChunk ){
    i64 nSize;                    /* Required file size */
    struct stat buf;              /* Used to hold return values of fstat() */
   
    if( osFstat(pFile->h, &buf) ) return SQLITE_IOERR_FSTAT;

    nSize = ((nByte+pFile->szChunk-1) / pFile->szChunk) * pFile->szChunk;
    if( nSize>(i64)buf.st_size ){
#if defined(HAVE_POSIX_FALLOCATE) && HAVE_POSIX_FALLOCATE
      int rc;
      do{
        rc = osFallocate(pFile->.h, buf.st_size, nSize-buf.st_size;
      }while( rc<0 && errno=EINTR );
      if( rc ) return SQLITE_IOERR_WRITE;
#else
      /* If the OS does not have posix_fallocate(), fake it. First use
      ** ftruncate() to set the file size, then write a single byte to
      ** the last byte in each block within the extended region. This
      ** is the same technique used by glibc to implement posix_fallocate()
................................................................................

  /* Shared locks never span more than one byte */
  assert( n==1 || lockType!=F_RDLCK );

  /* Locks are within range */
  assert( n>=1 && n<SQLITE_SHM_NLOCK );

  if( pShmNode->h>=0 ){
    /* Initialize the locking parameters */
    memset(&f, 0, sizeof(f));
    f.l_type = lockType;
    f.l_whence = SEEK_SET;
    f.l_start = ofst;
    f.l_len = n;

    rc = osFcntl(pShmNode->h, F_SETLK, &f);
    rc = (rc!=(-1)) ? SQLITE_OK : SQLITE_BUSY;
  }

  /* Update the global lock state and do debug tracing */
#ifdef SQLITE_DEBUG
  { u16 mask;
  OSTRACE(("SHM-LOCK "));
  mask = (1<<(ofst+n)) - (1<<ofst);
  if( rc==SQLITE_OK ){
................................................................................
  unixShmNode *p = pFd->pInode->pShmNode;
  assert( unixMutexHeld() );
  if( p && p->nRef==0 ){
    int i;
    assert( p->pInode==pFd->pInode );
    if( p->mutex ) sqlite3_mutex_free(p->mutex);
    for(i=0; i<p->nRegion; i++){
      if( p->h>=0 ){
        munmap(p->apRegion[i], p->szRegion);
      }else{
        sqlite3_free(p->apRegion[i]);
      }
    }
    sqlite3_free(p->apRegion);
    if( p->h>=0 ){
      robust_close(pFd, p->h, __LINE__);
      p->h = -1;
    }
    p->pInode->pShmNode = 0;
    sqlite3_free(p);
  }
}

/*
** Open a shared-memory area associated with open database file pDbFd.  
................................................................................
** same database file at the same time, database corruption will likely
** result. The SQLITE_SHM_DIRECTORY compile-time option is considered
** "unsupported" and may go away in a future SQLite release.
**
** When opening a new shared-memory file, if no other instances of that
** file are currently open, in this process or in other processes, then
** the file must be truncated to zero length or have its header cleared.
**
** If the original database file (pDbFd) is using the "unix-excl" VFS
** that means that an exclusive lock is held on the database file and
** that no other processes are able to read or write the database.  In
** that case, we do not really need shared memory.  No shared memory
** file is created.  The shared memory will be simulated with heap memory.
*/
static int unixOpenSharedMemory(unixFile *pDbFd){
  struct unixShm *p = 0;          /* The connection to be opened */
  struct unixShmNode *pShmNode;   /* The underlying mmapped file */
  int rc;                         /* Result code */
  unixInodeInfo *pInode;          /* The inode of fd */
  char *zShmFilename;             /* Name of the file used for SHM */
................................................................................
    struct stat sStat;                 /* fstat() info for database file */

    /* Call fstat() to figure out the permissions on the database file. If
    ** a new *-shm file is created, an attempt will be made to create it
    ** with the same permissions. The actual permissions the file is created
    ** with are subject to the current umask setting.
    */
    if( osFstat(pDbFd->h, &sStat) && pInode->bProcessLock==0 ){
      rc = SQLITE_IOERR_FSTAT;
      goto shm_open_err;
    }

#ifdef SQLITE_SHM_DIRECTORY
    nShmFilename = sizeof(SQLITE_SHM_DIRECTORY) + 30;
#else
................................................................................
    pShmNode->pInode = pDbFd->pInode;
    pShmNode->mutex = sqlite3_mutex_alloc(SQLITE_MUTEX_FAST);
    if( pShmNode->mutex==0 ){
      rc = SQLITE_NOMEM;
      goto shm_open_err;
    }

    if( pInode->bProcessLock==0 ){
      pShmNode->h = robust_open(zShmFilename, O_RDWR|O_CREAT,
                               (sStat.st_mode & 0777));
      if( pShmNode->h<0 ){
        rc = unixLogError(SQLITE_CANTOPEN_BKPT, "open", zShmFilename);
        goto shm_open_err;
      }
  
      /* Check to see if another process is holding the dead-man switch.
      ** If not, truncate the file to zero length. 
      */
      rc = SQLITE_OK;
      if( unixShmSystemLock(pShmNode, F_WRLCK, UNIX_SHM_DMS, 1)==SQLITE_OK ){
        if( robust_ftruncate(pShmNode->h, 0) ){
          rc = unixLogError(SQLITE_IOERR_SHMOPEN, "ftruncate", zShmFilename);
        }
      }
      if( rc==SQLITE_OK ){
        rc = unixShmSystemLock(pShmNode, F_RDLCK, UNIX_SHM_DMS, 1);
      }
      if( rc ) goto shm_open_err;
    }
  }

  /* Make the new connection a child of the unixShmNode */
  p->pShmNode = pShmNode;
#ifdef SQLITE_DEBUG
  p->id = pShmNode->nextShmId++;
#endif
................................................................................
    if( rc!=SQLITE_OK ) return rc;
  }

  p = pDbFd->pShm;
  pShmNode = p->pShmNode;
  sqlite3_mutex_enter(pShmNode->mutex);
  assert( szRegion==pShmNode->szRegion || pShmNode->nRegion==0 );
  assert( pShmNode->pInode==pDbFd->pInode );
  assert( pShmNode->h>=0 || pDbFd->pInode->bProcessLock==1 );
  assert( pShmNode->h<0 || pDbFd->pInode->bProcessLock==0 );

  if( pShmNode->nRegion<=iRegion ){
    char **apNew;                      /* New apRegion[] array */
    int nByte = (iRegion+1)*szRegion;  /* Minimum required file size */
    struct stat sStat;                 /* Used by fstat() */

    pShmNode->szRegion = szRegion;

    if( pShmNode->h>=0 ){
      /* The requested region is not mapped into this processes address space.
      ** Check to see if it has been allocated (i.e. if the wal-index file is
      ** large enough to contain the requested region).
      */
      if( osFstat(pShmNode->h, &sStat) ){
        rc = SQLITE_IOERR_SHMSIZE;
        goto shmpage_out;
      }
  
      if( sStat.st_size<nByte ){
        /* The requested memory region does not exist. If bExtend is set to
        ** false, exit early. *pp will be set to NULL and SQLITE_OK returned.
        **
        ** Alternatively, if bExtend is true, use ftruncate() to allocate
        ** the requested memory region.
        */
        if( !bExtend ) goto shmpage_out;
        if( robust_ftruncate(pShmNode->h, nByte) ){
          rc = unixLogError(SQLITE_IOERR_SHMSIZE, "ftruncate",
                            pShmNode->zFilename);
          goto shmpage_out;
        }
      }
    }

    /* Map the requested memory region into this processes address space. */
    apNew = (char **)sqlite3_realloc(
        pShmNode->apRegion, (iRegion+1)*sizeof(char *)
    );
    if( !apNew ){
      rc = SQLITE_IOERR_NOMEM;
      goto shmpage_out;
    }
    pShmNode->apRegion = apNew;
    while(pShmNode->nRegion<=iRegion){
      void *pMem;
      if( pShmNode->h>=0 ){
        pMem = mmap(0, szRegion, PROT_READ|PROT_WRITE, 
            MAP_SHARED, pShmNode->h, pShmNode->nRegion*szRegion
        );
        if( pMem==MAP_FAILED ){
          rc = SQLITE_IOERR;
          goto shmpage_out;
        }
      }else{
        pMem = sqlite3_malloc(szRegion);
        if( pMem==0 ){
          rc = SQLITE_NOMEM;
          goto shmpage_out;
        }
        memset(pMem, 0, szRegion);
      }
      pShmNode->apRegion[pShmNode->nRegion] = pMem;
      pShmNode->nRegion++;
    }
  }

shmpage_out:
................................................................................
  assert( ofst>=0 && ofst+n<=SQLITE_SHM_NLOCK );
  assert( n>=1 );
  assert( flags==(SQLITE_SHM_LOCK | SQLITE_SHM_SHARED)
       || flags==(SQLITE_SHM_LOCK | SQLITE_SHM_EXCLUSIVE)
       || flags==(SQLITE_SHM_UNLOCK | SQLITE_SHM_SHARED)
       || flags==(SQLITE_SHM_UNLOCK | SQLITE_SHM_EXCLUSIVE) );
  assert( n==1 || (flags & SQLITE_SHM_EXCLUSIVE)!=0 );
  assert( pShmNode->h>=0 || pDbFd->pInode->bProcessLock==1 );
  assert( pShmNode->h<0 || pDbFd->pInode->bProcessLock==0 );

  mask = (1<<(ofst+n)) - (1<<ofst);
  assert( n>1 || mask==(1<<ofst) );
  sqlite3_mutex_enter(pShmNode->mutex);
  if( flags & SQLITE_SHM_UNLOCK ){
    u16 allMask = 0; /* Mask of locks held by siblings */

................................................................................

  /* If pShmNode->nRef has reached 0, then close the underlying
  ** shared-memory file, too */
  unixEnterMutex();
  assert( pShmNode->nRef>0 );
  pShmNode->nRef--;
  if( pShmNode->nRef==0 ){
    if( deleteFlag && pShmNode->h>=0 ) unlink(pShmNode->zFilename);
    unixShmPurge(pDbFd);
  }
  unixLeaveMutex();

  return SQLITE_OK;
}

................................................................................
  ** Test byte-range lock using fcntl(). If the call succeeds, 
  ** assume that the file-system supports POSIX style locks. 
  */
  lockInfo.l_len = 1;
  lockInfo.l_start = 0;
  lockInfo.l_whence = SEEK_SET;
  lockInfo.l_type = F_RDLCK;
  if( osFcntl(pNew->h, F_GETLK, &lockInfo)!=-1 ) {
    if( strcmp(fsInfo.f_fstypename, "nfs")==0 ){
      return &nfsIoMethods;
    } else {
      return &posixIoMethods;
    }
  }else{
    return &dotlockIoMethods;
................................................................................
  /* Test if fcntl() is supported and use POSIX style locks.
  ** Otherwise fall back to the named semaphore method.
  */
  lockInfo.l_len = 1;
  lockInfo.l_start = 0;
  lockInfo.l_whence = SEEK_SET;
  lockInfo.l_type = F_RDLCK;
  if( osFcntl(pNew->h, F_GETLK, &lockInfo)!=-1 ) {
    return &posixIoMethods;
  }else{
    return &semIoMethods;
  }
}
static const sqlite3_io_methods 
  *(*const autolockIoFinder)(const char*,unixFile*) = autolockIoFinderImpl;
................................................................................
static int fillInUnixFile(
  sqlite3_vfs *pVfs,      /* Pointer to vfs object */
  int h,                  /* Open file descriptor of file being opened */
  int dirfd,              /* Directory file descriptor */
  sqlite3_file *pId,      /* Write to the unixFile structure here */
  const char *zFilename,  /* Name of the file being opened */
  int noLock,             /* Omit locking if true */
  int isDelete,           /* Delete on close if true */
  int isReadOnly          /* True if the file is opened read-only */
){
  const sqlite3_io_methods *pLockingStyle;
  unixFile *pNew = (unixFile *)pId;
  int rc = SQLITE_OK;

  assert( pNew->pInode==NULL );

................................................................................
#else
  assert( zFilename==0 || zFilename[0]=='/' );
#endif

  OSTRACE(("OPEN    %-3d %s\n", h, zFilename));
  pNew->h = h;
  pNew->dirfd = dirfd;

  pNew->zPath = zFilename;
  if( memcmp(pVfs->zName,"unix-excl",10)==0 ){
    pNew->ctrlFlags = UNIXFILE_EXCL;
  }else{
    pNew->ctrlFlags = 0;
  }
  if( isReadOnly ){
    pNew->ctrlFlags |= UNIXFILE_RDONLY;
  }

#if OS_VXWORKS
  pNew->pId = vxworksFindFileId(zFilename);
  if( pNew->pId==0 ){
    noLock = 1;
    rc = SQLITE_NOMEM;
  }
................................................................................
      ** handle h - as it is guaranteed that no posix locks will be released
      ** by doing so.
      **
      ** If scenario (a) caused the error then things are not so safe. The
      ** implicit assumption here is that if fstat() fails, things are in
      ** such bad shape that dropping a lock or two doesn't matter much.
      */
      robust_close(pNew, h, __LINE__);
      h = -1;
    }
    unixLeaveMutex();
  }

#if SQLITE_ENABLE_LOCKING_STYLE && defined(__APPLE__)
  else if( pLockingStyle == &afpIoMethods ){
................................................................................
      pCtx->dbPath = zFilename;
      pCtx->reserved = 0;
      srandomdev();
      unixEnterMutex();
      rc = findInodeInfo(pNew, &pNew->pInode);
      if( rc!=SQLITE_OK ){
        sqlite3_free(pNew->lockingContext);
        robust_close(pNew, h, __LINE__);
        h = -1;
      }
      unixLeaveMutex();        
    }
  }
#endif

................................................................................
    unixLeaveMutex();
  }
#endif
  
  pNew->lastErrno = 0;
#if OS_VXWORKS
  if( rc!=SQLITE_OK ){
    if( h>=0 ) robust_close(pNew, h, __LINE__);
    h = -1;
    unlink(zFilename);
    isDelete = 0;
  }
  pNew->isDelete = isDelete;
#endif
  if( rc!=SQLITE_OK ){
    if( dirfd>=0 ) robust_close(pNew, dirfd, __LINE__);
    if( h>=0 ) robust_close(pNew, h, __LINE__);
  }else{
    pNew->pMethod = pLockingStyle;
    OpenCounter(+1);
  }
  return rc;
}

................................................................................
  int fd = -1;
  char zDirname[MAX_PATHNAME+1];

  sqlite3_snprintf(MAX_PATHNAME, zDirname, "%s", zFilename);
  for(ii=(int)strlen(zDirname); ii>1 && zDirname[ii]!='/'; ii--);
  if( ii>0 ){
    zDirname[ii] = '\0';
    fd = robust_open(zDirname, O_RDONLY|O_BINARY, 0);
    if( fd>=0 ){
#ifdef FD_CLOEXEC
      osFcntl(fd, F_SETFD, osFcntl(fd, F_GETFD, 0) | FD_CLOEXEC);
#endif
      OSTRACE(("OPENDIR %-3d %s\n", fd, zDirname));
    }
  }
  *pFd = fd;
  return (fd>=0?SQLITE_OK:unixLogError(SQLITE_CANTOPEN_BKPT, "open", zDirname));
}
................................................................................
  struct stat buf;
  const char *zDir = 0;

  azDirs[0] = sqlite3_temp_directory;
  if( !azDirs[1] ) azDirs[1] = getenv("TMPDIR");
  for(i=0; i<sizeof(azDirs)/sizeof(azDirs[0]); zDir=azDirs[i++]){
    if( zDir==0 ) continue;
    if( osStat(zDir, &buf) ) continue;
    if( !S_ISDIR(buf.st_mode) ) continue;
    if( osAccess(zDir, 07) ) continue;
    break;
  }
  return zDir;
}

/*
** Create a temporary file name in zBuf.  zBuf must be allocated
................................................................................
    sqlite3_snprintf(nBuf-17, zBuf, "%s/"SQLITE_TEMP_FILE_PREFIX, zDir);
    j = (int)strlen(zBuf);
    sqlite3_randomness(15, &zBuf[j]);
    for(i=0; i<15; i++, j++){
      zBuf[j] = (char)zChars[ ((unsigned char)zBuf[j])%(sizeof(zChars)-1) ];
    }
    zBuf[j] = 0;
  }while( osAccess(zBuf,0)==0 );
  return SQLITE_OK;
}

#if SQLITE_ENABLE_LOCKING_STYLE && defined(__APPLE__)
/*
** Routine to transform a unixFile into a proxy-locking unixFile.
** Implementation in the proxy-lock division, but used by unixOpen()
................................................................................
    mode_t openMode;              /* Permissions to create file with */
    rc = findCreateFileMode(zName, flags, &openMode);
    if( rc!=SQLITE_OK ){
      assert( !p->pUnused );
      assert( eType==SQLITE_OPEN_WAL || eType==SQLITE_OPEN_MAIN_JOURNAL );
      return rc;
    }
    fd = robust_open(zName, openFlags, openMode);
    OSTRACE(("OPENX   %-3d %s 0%o\n", fd, zName, openFlags));
    if( fd<0 && errno!=EISDIR && isReadWrite && !isExclusive ){
      /* Failed to open the file for read/write access. Try read-only. */
      flags &= ~(SQLITE_OPEN_READWRITE|SQLITE_OPEN_CREATE);
      openFlags &= ~(O_RDWR|O_CREAT);
      flags |= SQLITE_OPEN_READONLY;
      openFlags |= O_RDONLY;
      isReadonly = 1;
      fd = robust_open(zName, openFlags, openMode);
    }
    if( fd<0 ){
      rc = unixLogError(SQLITE_CANTOPEN_BKPT, "open", zName);
      goto open_finished;
    }
  }
  assert( fd>=0 );
................................................................................
    rc = openDirectory(zPath, &dirfd);
    if( rc!=SQLITE_OK ){
      /* It is safe to close fd at this point, because it is guaranteed not
      ** to be open on a database file. If it were open on a database file,
      ** it would not be safe to close as this would release any locks held
      ** on the file by this process.  */
      assert( eType!=SQLITE_OPEN_MAIN_DB );
      robust_close(p, fd, __LINE__);
      goto open_finished;
    }
  }

#ifdef FD_CLOEXEC
  osFcntl(fd, F_SETFD, osFcntl(fd, F_GETFD, 0) | FD_CLOEXEC);
#endif

  noLock = eType!=SQLITE_OPEN_MAIN_DB;

  
#if defined(__APPLE__) || SQLITE_ENABLE_LOCKING_STYLE
  struct statfs fsInfo;
  if( fstatfs(fd, &fsInfo) == -1 ){
    ((unixFile*)pFile)->lastErrno = errno;
    if( dirfd>=0 ) robust_close(p, dirfd, __LINE__);
    robust_close(p, fd, __LINE__);
    return SQLITE_IOERR_ACCESS;
  }
  if (0 == strncmp("msdos", fsInfo.f_fstypename, 5)) {
    ((unixFile*)pFile)->fsFlags |= SQLITE_FSFLAGS_IS_MSDOS;
  }
#endif
  
................................................................................
        ** on that file that are currently holding advisory locks on it,
        ** then the call to close() will cancel those locks. In practice,
        ** we're assuming that statfs() doesn't fail very often. At least
        ** not while other file descriptors opened by the same process on
        ** the same file are working.  */
        p->lastErrno = errno;
        if( dirfd>=0 ){
          robust_close(p, dirfd, __LINE__);
        }
        robust_close(p, fd, __LINE__);
        rc = SQLITE_IOERR_ACCESS;
        goto open_finished;
      }
      useProxy = !(fsInfo.f_flags&MNT_LOCAL);
    }
    if( useProxy ){
      rc = fillInUnixFile(pVfs, fd, dirfd, pFile, zPath, noLock,
                          isDelete, isReadonly);
      if( rc==SQLITE_OK ){
        rc = proxyTransformUnixFile((unixFile*)pFile, ":auto:");
        if( rc!=SQLITE_OK ){
          /* Use unixClose to clean up the resources added in fillInUnixFile 
          ** and clear all the structure's references.  Specifically, 
          ** pFile->pMethods will be NULL so sqlite3OsClose will be a no-op 
          */
................................................................................
        }
      }
      goto open_finished;
    }
  }
#endif
  
  rc = fillInUnixFile(pVfs, fd, dirfd, pFile, zPath, noLock,
                      isDelete, isReadonly);
open_finished:
  if( rc!=SQLITE_OK ){
    sqlite3_free(p->pUnused);
  }
  return rc;
}

................................................................................
      if( fsync(fd)==-1 )
#else
      if( fsync(fd) )
#endif
      {
        rc = unixLogError(SQLITE_IOERR_DIR_FSYNC, "fsync", zPath);
      }
      robust_close(0, fd, __LINE__);


    }
  }
#endif
  return rc;
}

/*
................................................................................
    case SQLITE_ACCESS_READ:
      amode = R_OK;
      break;

    default:
      assert(!"Invalid flags argument");
  }
  *pResOut = (osAccess(zPath, amode)==0);
  if( flags==SQLITE_ACCESS_EXISTS && *pResOut ){
    struct stat buf;
    if( 0==stat(zPath, &buf) && buf.st_size==0 ){
      *pResOut = 0;
    }
  }
  return SQLITE_OK;
................................................................................
  UNUSED_PARAMETER(pVfs);

  zOut[nOut-1] = '\0';
  if( zPath[0]=='/' ){
    sqlite3_snprintf(nOut, zOut, "%s", zPath);
  }else{
    int nCwd;
    if( osGetcwd(zOut, nOut-1)==0 ){
      return unixLogError(SQLITE_CANTOPEN_BKPT, "getcwd", zPath);
    }
    nCwd = (int)strlen(zOut);
    sqlite3_snprintf(nOut-nCwd, &zOut[nCwd], "/%s", zPath);
  }
  return SQLITE_OK;
}
................................................................................
  ** that we always use the same random number sequence.  This makes the
  ** tests repeatable.
  */
  memset(zBuf, 0, nBuf);
#if !defined(SQLITE_TEST)
  {
    int pid, fd;
    fd = robust_open("/dev/urandom", O_RDONLY, 0);
    if( fd<0 ){
      time_t t;
      time(&t);
      memcpy(zBuf, &t, sizeof(t));
      pid = getpid();
      memcpy(&zBuf[sizeof(t)], &pid, sizeof(pid));
      assert( sizeof(t)+sizeof(pid)<=(size_t)nBuf );
      nBuf = sizeof(t) + sizeof(pid);
    }else{
      do{ nBuf = osRead(fd, zBuf, nBuf); }while( nBuf<0 && errno==EINTR );
      robust_close(0, fd, __LINE__);
    }
  }
#endif
  return nBuf;
}


................................................................................
  }else{
    pUnused = sqlite3_malloc(sizeof(*pUnused));
    if( !pUnused ){
      return SQLITE_NOMEM;
    }
  }
  if( fd<0 ){
    fd = robust_open(path, openFlags, SQLITE_DEFAULT_FILE_PERMISSIONS);
    terrno = errno;
    if( fd<0 && errno==ENOENT && islockfile ){
      if( proxyCreateLockPath(path) == SQLITE_OK ){
        fd = robust_open(path, openFlags, SQLITE_DEFAULT_FILE_PERMISSIONS);
      }
    }
  }
  if( fd<0 ){
    openFlags = O_RDONLY;
    fd = robust_open(path, openFlags, SQLITE_DEFAULT_FILE_PERMISSIONS);
    terrno = errno;
  }
  if( fd<0 ){
    if( islockfile ){
      return SQLITE_BUSY;
    }
    switch (terrno) {
................................................................................
  memset(pNew, 0, sizeof(unixFile));
  pNew->openFlags = openFlags;
  dummyVfs.pAppData = (void*)&autolockIoFinder;
  pUnused->fd = fd;
  pUnused->flags = openFlags;
  pNew->pUnused = pUnused;
  
  rc = fillInUnixFile(&dummyVfs, fd, dirfd, (sqlite3_file*)pNew, path, 0, 0, 0);
  if( rc==SQLITE_OK ){
    *ppFile = pNew;
    return SQLITE_OK;
  }
end_create_proxy:    
  robust_close(pNew, fd, __LINE__);
  sqlite3_free(pNew);
  sqlite3_free(pUnused);
  return rc;
}

#ifdef SQLITE_TEST
/* simulate multiple hosts by creating unique hostid file paths */
................................................................................
  pathLen = strlcpy(tPath, cPath, MAXPATHLEN);
  if( pathLen>MAXPATHLEN || pathLen<6 || 
     (strlcpy(&tPath[pathLen-5], "break", 6) != 5) ){
    sqlite3_snprintf(sizeof(errmsg),errmsg,"path error (len %d)",(int)pathLen);
    goto end_breaklock;
  }
  /* read the conch content */
  readLen = osPread(conchFile->h, buf, PROXY_MAXCONCHLEN, 0);
  if( readLen<PROXY_PATHINDEX ){
    sqlite3_snprintf(sizeof(errmsg),errmsg,"read error (len %d)",(int)readLen);
    goto end_breaklock;
  }
  /* write it out to the temporary break file */
  fd = robust_open(tPath, (O_RDWR|O_CREAT|O_EXCL),
                   SQLITE_DEFAULT_FILE_PERMISSIONS);
  if( fd<0 ){
    sqlite3_snprintf(sizeof(errmsg), errmsg, "create failed (%d)", errno);
    goto end_breaklock;
  }
  if( osPwrite(fd, buf, readLen, 0) != (ssize_t)readLen ){
    sqlite3_snprintf(sizeof(errmsg), errmsg, "write failed (%d)", errno);
    goto end_breaklock;
  }
  if( rename(tPath, cPath) ){
    sqlite3_snprintf(sizeof(errmsg), errmsg, "rename failed (%d)", errno);
    goto end_breaklock;
  }
  rc = 0;
  fprintf(stderr, "broke stale lock on %s\n", cPath);
  robust_close(pFile, conchFile->h, __LINE__);
  conchFile->h = fd;
  conchFile->openFlags = O_RDWR | O_CREAT;

end_breaklock:
  if( rc ){
    if( fd>=0 ){
      unlink(tPath);
      robust_close(pFile, fd, __LINE__);
    }
    fprintf(stderr, "failed to break stale lock on %s, %s\n", cPath, errmsg);
  }
  return rc;
}

/* Take the requested lock on the conch file and break a stale lock if the 
................................................................................
      /* If the lock failed (busy):
       * 1st try: get the mod time of the conch, wait 0.5s and try again. 
       * 2nd try: fail if the mod time changed or host id is different, wait 
       *           10 sec and try again
       * 3rd try: break the lock unless the mod time has changed.
       */
      struct stat buf;
      if( osFstat(conchFile->h, &buf) ){
        pFile->lastErrno = errno;
        return SQLITE_IOERR_LOCK;
      }
      
      if( nTries==1 ){
        conchModTime = buf.st_mtimespec;
        usleep(500000); /* wait 0.5 sec and try the lock again*/
................................................................................
      if( conchModTime.tv_sec != buf.st_mtimespec.tv_sec || 
         conchModTime.tv_nsec != buf.st_mtimespec.tv_nsec ){
        return SQLITE_BUSY;
      }
      
      if( nTries==2 ){  
        char tBuf[PROXY_MAXCONCHLEN];
        int len = osPread(conchFile->h, tBuf, PROXY_MAXCONCHLEN, 0);
        if( len<0 ){
          pFile->lastErrno = errno;
          return SQLITE_IOERR_LOCK;
        }
        if( len>PROXY_PATHINDEX && tBuf[0]==(char)PROXY_CONCHVERSION){
          /* don't break the lock if the host id doesn't match */
          if( 0!=memcmp(&tBuf[PROXY_HEADERLEN], myHostID, PROXY_HOSTIDLEN) ){
................................................................................
        rc = unixWrite((sqlite3_file *)conchFile, writeBuffer, writeSize, 0);
        fsync(conchFile->h);
        /* If we created a new conch file (not just updated the contents of a 
         ** valid conch file), try to match the permissions of the database 
         */
        if( rc==SQLITE_OK && createConch ){
          struct stat buf;

          int err = osFstat(pFile->h, &buf);
          if( err==0 ){
            mode_t cmode = buf.st_mode&(S_IRUSR|S_IWUSR | S_IRGRP|S_IWGRP |
                                        S_IROTH|S_IWOTH);
            /* try to match the database file R/W permissions, ignore failure */
#ifndef SQLITE_PROXY_DEBUG
            osFchmod(conchFile->h, cmode);
#else
            do{
              rc = osFchmod(conchFile->h, cmode);
            }while( rc==(-1) && errno==EINTR );
            if( rc!=0 ){
              int code = errno;
              fprintf(stderr, "fchmod %o FAILED with %d %s\n",
                      cmode, code, strerror(code));
            } else {
              fprintf(stderr, "fchmod %o SUCCEDED\n",cmode);
................................................................................
      }
      conchFile->pMethod->xUnlock((sqlite3_file*)conchFile, SHARED_LOCK);
      
    end_takeconch:
      OSTRACE(("TRANSPROXY: CLOSE  %d\n", pFile->h));
      if( rc==SQLITE_OK && pFile->openFlags ){
        if( pFile->h>=0 ){
          robust_close(pFile, pFile->h, __LINE__);



        }




        pFile->h = -1;
        int fd = robust_open(pCtx->dbPath, pFile->openFlags,
                      SQLITE_DEFAULT_FILE_PERMISSIONS);
        OSTRACE(("TRANSPROXY: OPEN  %d\n", fd));
        if( fd>=0 ){
          pFile->h = fd;
        }else{
          rc=SQLITE_CANTOPEN_BKPT; /* SQLITE_BUSY? proxyTakeConch called
           during locking */
................................................................................
      ** Ugh, since O_RDONLY==0x0000 we test for !O_RDWR since unixOpen asserts
      ** that openFlags will have only one of O_RDONLY or O_RDWR.
      */
      struct statfs fsInfo;
      struct stat conchInfo;
      int goLockless = 0;

      if( osStat(pCtx->conchFilePath, &conchInfo) == -1 ) {
        int err = errno;
        if( (err==ENOENT) && (statfs(dbPath, &fsInfo) != -1) ){
          goLockless = (fsInfo.f_flags&MNT_RDONLY) == MNT_RDONLY;
        }
      }
      if( goLockless ){
        pCtx->conchHeld = -1; /* read only FS/ lockless */
................................................................................
  ** Most finders simply return a pointer to a fixed sqlite3_io_methods
  ** object.  But the "autolockIoFinder" available on MacOSX does a little
  ** more than that; it looks at the filesystem type that hosts the 
  ** database file and tries to choose an locking method appropriate for
  ** that filesystem time.
  */
  #define UNIXVFS(VFSNAME, FINDER) {                        \
    3,                    /* iVersion */                    \
    sizeof(unixFile),     /* szOsFile */                    \
    MAX_PATHNAME,         /* mxPathname */                  \
    0,                    /* pNext */                       \
    VFSNAME,              /* zName */                       \
    (void*)&FINDER,       /* pAppData */                    \
    unixOpen,             /* xOpen */                       \
    unixDelete,           /* xDelete */                     \
................................................................................
    unixDlSym,            /* xDlSym */                      \
    unixDlClose,          /* xDlClose */                    \
    unixRandomness,       /* xRandomness */                 \
    unixSleep,            /* xSleep */                      \
    unixCurrentTime,      /* xCurrentTime */                \
    unixGetLastError,     /* xGetLastError */               \
    unixCurrentTimeInt64, /* xCurrentTimeInt64 */           \
    unixSetSystemCall,    /* xSetSystemCall */              \
    unixGetSystemCall,    /* xGetSystemCall */              \
    unixNextSystemCall,   /* xNextSystemCall */             \
  }

  /*
  ** All default VFSes for unix are contained in the following array.
  **
  ** Note that the sqlite3_vfs.pNext field of the VFS object is modified
  ** by the SQLite core when the VFS is registered.  So the following
................................................................................
#if SQLITE_ENABLE_LOCKING_STYLE && (OS_VXWORKS || defined(__APPLE__))
    UNIXVFS("unix",          autolockIoFinder ),
#else
    UNIXVFS("unix",          posixIoFinder ),
#endif
    UNIXVFS("unix-none",     nolockIoFinder ),
    UNIXVFS("unix-dotfile",  dotlockIoFinder ),
    UNIXVFS("unix-excl",     posixIoFinder ),
#if OS_VXWORKS
    UNIXVFS("unix-namedsem", semIoFinder ),
#endif
#if SQLITE_ENABLE_LOCKING_STYLE
    UNIXVFS("unix-posix",    posixIoFinder ),
#if !OS_VXWORKS
    UNIXVFS("unix-flock",    flockIoFinder ),

/*
** Initialize and deinitialize the operating system interface.
*/
int sqlite3_os_init(void){
  static sqlite3_vfs winVfs = {
    2,                   /* iVersion */
    sizeof(winFile),     /* szOsFile */
    MAX_PATH,            /* mxPathname */
    0,                   /* pNext */
    "win32",             /* zName */
    0,                   /* pAppData */
    winOpen,             /* xOpen */
    winDelete,           /* xDelete */
................................................................................
    winDlSym,            /* xDlSym */
    winDlClose,          /* xDlClose */
    winRandomness,       /* xRandomness */
    winSleep,            /* xSleep */
    winCurrentTime,      /* xCurrentTime */
    winGetLastError,     /* xGetLastError */
    winCurrentTimeInt64, /* xCurrentTimeInt64 */



  };

#ifndef SQLITE_OMIT_WAL
  /* get memory map allocation granularity */
  memset(&winSysInfo, 0, sizeof(SYSTEM_INFO));
  GetSystemInfo(&winSysInfo);
  assert(winSysInfo.dwAllocationGranularity > 0);

/*
** Initialize and deinitialize the operating system interface.
*/
int sqlite3_os_init(void){
  static sqlite3_vfs winVfs = {
    3,                   /* iVersion */
    sizeof(winFile),     /* szOsFile */
    MAX_PATH,            /* mxPathname */
    0,                   /* pNext */
    "win32",             /* zName */
    0,                   /* pAppData */
    winOpen,             /* xOpen */
    winDelete,           /* xDelete */
................................................................................
    winDlSym,            /* xDlSym */
    winDlClose,          /* xDlClose */
    winRandomness,       /* xRandomness */
    winSleep,            /* xSleep */
    winCurrentTime,      /* xCurrentTime */
    winGetLastError,     /* xGetLastError */
    winCurrentTimeInt64, /* xCurrentTimeInt64 */
    0,                   /* xSetSystemCall */
    0,                   /* xGetSystemCall */
    0,                   /* xNextSystemCall */
  };

#ifndef SQLITE_OMIT_WAL
  /* get memory map allocation granularity */
  memset(&winSysInfo, 0, sizeof(SYSTEM_INFO));
  GetSystemInfo(&winSysInfo);
  assert(winSysInfo.dwAllocationGranularity > 0);

      sqlite3VdbeSetColName(v, 0, COLNAME_NAME, "cache_size", SQLITE_STATIC);
      pParse->nMem += 2;
      addr = sqlite3VdbeAddOpList(v, ArraySize(getCacheSize), getCacheSize);
      sqlite3VdbeChangeP1(v, addr, iDb);
      sqlite3VdbeChangeP1(v, addr+1, iDb);
      sqlite3VdbeChangeP1(v, addr+6, SQLITE_DEFAULT_CACHE_SIZE);
    }else{
      int size = sqlite3Atoi(zRight);
      if( size<0 ) size = -size;
      sqlite3BeginWriteOperation(pParse, 0, iDb);
      sqlite3VdbeAddOp2(v, OP_Integer, size, 1);
      sqlite3VdbeAddOp3(v, OP_SetCookie, iDb, BTREE_DEFAULT_CACHE_SIZE, 1);
      pDb->pSchema->cache_size = size;
      sqlite3BtreeSetCacheSize(pDb->pBt, pDb->pSchema->cache_size);
    }
  }else
................................................................................
  ** N should be a positive integer.
  */
  if( sqlite3StrICmp(zLeft,"cache_size")==0 ){
    if( sqlite3ReadSchema(pParse) ) goto pragma_out;
    if( !zRight ){
      returnSingleInt(pParse, "cache_size", pDb->pSchema->cache_size);
    }else{
      int size = sqlite3Atoi(zRight);
      if( size<0 ) size = -size;
      pDb->pSchema->cache_size = size;
      sqlite3BtreeSetCacheSize(pDb->pBt, pDb->pSchema->cache_size);
    }
  }else

  /*
  **   PRAGMA temp_store

      sqlite3VdbeSetColName(v, 0, COLNAME_NAME, "cache_size", SQLITE_STATIC);
      pParse->nMem += 2;
      addr = sqlite3VdbeAddOpList(v, ArraySize(getCacheSize), getCacheSize);
      sqlite3VdbeChangeP1(v, addr, iDb);
      sqlite3VdbeChangeP1(v, addr+1, iDb);
      sqlite3VdbeChangeP1(v, addr+6, SQLITE_DEFAULT_CACHE_SIZE);
    }else{
      int size = sqlite3AbsInt32(sqlite3Atoi(zRight));

      sqlite3BeginWriteOperation(pParse, 0, iDb);
      sqlite3VdbeAddOp2(v, OP_Integer, size, 1);
      sqlite3VdbeAddOp3(v, OP_SetCookie, iDb, BTREE_DEFAULT_CACHE_SIZE, 1);
      pDb->pSchema->cache_size = size;
      sqlite3BtreeSetCacheSize(pDb->pBt, pDb->pSchema->cache_size);
    }
  }else
................................................................................
  ** N should be a positive integer.
  */
  if( sqlite3StrICmp(zLeft,"cache_size")==0 ){
    if( sqlite3ReadSchema(pParse) ) goto pragma_out;
    if( !zRight ){
      returnSingleInt(pParse, "cache_size", pDb->pSchema->cache_size);
    }else{
      int size = sqlite3AbsInt32(sqlite3Atoi(zRight));

      pDb->pSchema->cache_size = size;
      sqlite3BtreeSetCacheSize(pDb->pBt, pDb->pSchema->cache_size);
    }
  }else

  /*
  **   PRAGMA temp_store

  int size;
  Table *pTab;
  Db *pDb;
  char const *azArg[4];
  int meta[5];
  InitData initData;
  char const *zMasterSchema;
  char const *zMasterName = SCHEMA_TABLE(iDb);
  int openedTransaction = 0;

  /*
  ** The master database table has a structure like this
  */
  static const char master_schema[] = 
     "CREATE TABLE sqlite_master(\n"
................................................................................
    }
  }else{
    DbSetProperty(db, iDb, DB_Empty);
  }
  pDb->pSchema->enc = ENC(db);

  if( pDb->pSchema->cache_size==0 ){
    size = meta[BTREE_DEFAULT_CACHE_SIZE-1];
    if( size==0 ){ size = SQLITE_DEFAULT_CACHE_SIZE; }
    if( size<0 ) size = -size;
    pDb->pSchema->cache_size = size;
    sqlite3BtreeSetCacheSize(pDb->pBt, pDb->pSchema->cache_size);
  }

  /*
  ** file_format==1    Version 3.0.0.
  ** file_format==2    Version 3.1.3.  // ALTER TABLE ADD COLUMN

  int size;
  Table *pTab;
  Db *pDb;
  char const *azArg[4];
  int meta[5];
  InitData initData;
  char const *zMasterSchema;
  char const *zMasterName;
  int openedTransaction = 0;

  /*
  ** The master database table has a structure like this
  */
  static const char master_schema[] = 
     "CREATE TABLE sqlite_master(\n"
................................................................................
    }
  }else{
    DbSetProperty(db, iDb, DB_Empty);
  }
  pDb->pSchema->enc = ENC(db);

  if( pDb->pSchema->cache_size==0 ){
    size = sqlite3AbsInt32(meta[BTREE_DEFAULT_CACHE_SIZE-1]);
    if( size==0 ){ size = SQLITE_DEFAULT_CACHE_SIZE; }

    pDb->pSchema->cache_size = size;
    sqlite3BtreeSetCacheSize(pDb->pBt, pDb->pSchema->cache_size);
  }

  /*
  ** file_format==1    Version 3.0.0.
  ** file_format==2    Version 3.1.3.  // ALTER TABLE ADD COLUMN

            v = va_arg(ap,i64);
          }else if( flag_long ){
            v = va_arg(ap,long int);
          }else{
            v = va_arg(ap,int);
          }
          if( v<0 ){



            longvalue = -v;

            prefix = '-';
          }else{
            longvalue = v;
            if( flag_plussign )        prefix = '+';
            else if( flag_blanksign )  prefix = ' ';
            else                       prefix = 0;
          }

            v = va_arg(ap,i64);
          }else if( flag_long ){
            v = va_arg(ap,long int);
          }else{
            v = va_arg(ap,int);
          }
          if( v<0 ){
            if( v==SMALLEST_INT64 ){
              longvalue = ((u64)1)<<63;
            }else{
              longvalue = -v;
            }
            prefix = '-';
          }else{
            longvalue = v;
            if( flag_plussign )        prefix = '+';
            else if( flag_blanksign )  prefix = ' ';
            else                       prefix = 0;
          }

  char nullvalue[20];    /* The text to print when a NULL comes back from
                         ** the database */
  struct previous_mode_data explainPrev;
                         /* Holds the mode information just before
                         ** .explain ON */
  char outfile[FILENAME_MAX]; /* Filename for *out */
  const char *zDbFilename;    /* name of the database file */

  sqlite3_stmt *pStmt;   /* Current statement if any. */
  FILE *pLog;            /* Write log output here */
};

/*
** These are the allowed modes.
*/
................................................................................
        printf("\n");
      }
    }
    sqlite3_free_table(azResult);
  }else

  if( c=='t' && n>=8 && strncmp(azArg[0], "testctrl", n)==0 && nArg>=2 ){



















    int testctrl = -1;
    int rc = 0;

    open_db(p);

    /* convert testctrl text option to value. allow only the first 
    ** three characters of the option to be used or the numerical 
    ** value. */
         if( strncmp( azArg[1], "prng_save", 6 )==0 )            testctrl = SQLITE_TESTCTRL_PRNG_SAVE;                        
    else if( strncmp( azArg[1], "prng_restore", 10 )==0 )        testctrl = SQLITE_TESTCTRL_PRNG_RESTORE;        
    else if( strncmp( azArg[1], "prng_reset", 10 )==0 )          testctrl = SQLITE_TESTCTRL_PRNG_RESET;          
    else if( strncmp( azArg[1], "bitvec_test", 6 )==3 )          testctrl = SQLITE_TESTCTRL_BITVEC_TEST;         
    else if( strncmp( azArg[1], "fault_install", 6 )==3 )        testctrl = SQLITE_TESTCTRL_FAULT_INSTALL;       
    else if( strncmp( azArg[1], "benign_malloc_hooks", 3 )==0 )  testctrl = SQLITE_TESTCTRL_BENIGN_MALLOC_HOOKS; 
    else if( strncmp( azArg[1], "pending_byte", 3 )==0 )         testctrl = SQLITE_TESTCTRL_PENDING_BYTE;        
    else if( strncmp( azArg[1], "assert", 3 )==0 )               testctrl = SQLITE_TESTCTRL_ASSERT;              
    else if( strncmp( azArg[1], "always", 3 )==0 )               testctrl = SQLITE_TESTCTRL_ALWAYS;              
    else if( strncmp( azArg[1], "reserve", 3 )==0 )              testctrl = SQLITE_TESTCTRL_RESERVE;             
    else if( strncmp( azArg[1], "optimizations", 3 )==0 )        testctrl = SQLITE_TESTCTRL_OPTIMIZATIONS;       
    else if( strncmp( azArg[1], "iskeyword", 3 )==0 )            testctrl = SQLITE_TESTCTRL_ISKEYWORD;           
    else if( strncmp( azArg[1], "pghdrsz", 3 )==0 )              testctrl = SQLITE_TESTCTRL_PGHDRSZ;             
    else if( strncmp( azArg[1], "scratchmalloc", 3 )==0 )        testctrl = SQLITE_TESTCTRL_SCRATCHMALLOC;       
    else                                                         testctrl = atoi(azArg[1]);














    if( (testctrl<SQLITE_TESTCTRL_FIRST) || (testctrl>SQLITE_TESTCTRL_LAST) ){
      fprintf(stderr,"Error: invalid testctrl option: %s\n", azArg[1]);
    }else{
      switch(testctrl){

        /* sqlite3_test_control(int, db, int) */
        case SQLITE_TESTCTRL_OPTIMIZATIONS:
        case SQLITE_TESTCTRL_RESERVE:             
          if( nArg==3 ){
            int opt = (int)strtol(azArg[2], 0, 0);        
            rc = sqlite3_test_control(testctrl, p->db, opt);
            printf("%d (0x%08x)\n", rc, rc);
          } else {
            fprintf(stderr,"Error: testctrl %s takes a single int option\n", azArg[1]);

          }
          break;

        /* sqlite3_test_control(int) */
        case SQLITE_TESTCTRL_PRNG_SAVE:           
        case SQLITE_TESTCTRL_PRNG_RESTORE:        
        case SQLITE_TESTCTRL_PRNG_RESET:
................................................................................
        /* sqlite3_test_control(int, uint) */
        case SQLITE_TESTCTRL_PENDING_BYTE:        
          if( nArg==3 ){
            unsigned int opt = (unsigned int)atoi(azArg[2]);        
            rc = sqlite3_test_control(testctrl, opt);
            printf("%d (0x%08x)\n", rc, rc);
          } else {
            fprintf(stderr,"Error: testctrl %s takes a single unsigned int option\n", azArg[1]);

          }
          break;
          
        /* sqlite3_test_control(int, int) */
        case SQLITE_TESTCTRL_ASSERT:              
        case SQLITE_TESTCTRL_ALWAYS:              
          if( nArg==3 ){
            int opt = atoi(azArg[2]);        
            rc = sqlite3_test_control(testctrl, opt);
            printf("%d (0x%08x)\n", rc, rc);
          } else {
            fprintf(stderr,"Error: testctrl %s takes a single int option\n", azArg[1]);

          }
          break;

        /* sqlite3_test_control(int, char *) */
#ifdef SQLITE_N_KEYWORD
        case SQLITE_TESTCTRL_ISKEYWORD:           
          if( nArg==3 ){
            const char *opt = azArg[2];        
            rc = sqlite3_test_control(testctrl, opt);
            printf("%d (0x%08x)\n", rc, rc);
          } else {
            fprintf(stderr,"Error: testctrl %s takes a single char * option\n", azArg[1]);

          }
          break;
#endif

        case SQLITE_TESTCTRL_BITVEC_TEST:         
        case SQLITE_TESTCTRL_FAULT_INSTALL:       
        case SQLITE_TESTCTRL_BENIGN_MALLOC_HOOKS: 
        case SQLITE_TESTCTRL_SCRATCHMALLOC:       
        default:
          fprintf(stderr,"Error: CLI support for testctrl %s not implemented\n", azArg[1]);

          break;
      }
    }
  }else

  if( c=='t' && n>4 && strncmp(azArg[0], "timeout", n)==0 && nArg==2 ){
    open_db(p);
    sqlite3_busy_timeout(p->db, atoi(azArg[1]));
  }else
    
  if( HAS_TIMER && c=='t' && n>=5 && strncmp(azArg[0], "timer", n)==0 && nArg==2 ){


    enableTimer = booleanValue(azArg[1]);
  }else
  
  if( c=='w' && strncmp(azArg[0], "width", n)==0 && nArg>1 ){
    int j;
    assert( nArg<=ArraySize(azArg) );
    for(j=1; j<nArg && j<ArraySize(p->colWidth); j++){
................................................................................
      }
      free(zSql);
      zSql = 0;
      nSql = 0;
    }
  }
  if( zSql ){

    if( !_all_whitespace(zSql) ) fprintf(stderr, "Error: incomplete SQL: %s\n", zSql);

    free(zSql);
  }
  free(zLine);
  return errCnt;
}

/*
................................................................................
  "   -html                set output mode to HTML\n"
  "   -line                set output mode to 'line'\n"
  "   -list                set output mode to 'list'\n"
  "   -separator 'x'       set output field separator (|)\n"
  "   -stats               print memory stats before each finalize\n"
  "   -nullvalue 'text'    set text string for NULL values\n"
  "   -version             show SQLite version\n"




;
static void usage(int showDetail){
  fprintf(stderr,
      "Usage: %s [OPTIONS] FILENAME [SQL]\n"  
      "FILENAME is the name of an SQLite database. A new database is created\n"
      "if the file does not previously exist.\n", Argv0);
  if( showDetail ){
................................................................................
        if( c=='K' ){ szHeap *= 1000; break; }
        if( c=='G' ){ szHeap *= 1000000000; break; }
      }
      if( szHeap>0x7fff0000 ) szHeap = 0x7fff0000;
#if defined(SQLITE_ENABLE_MEMSYS3) || defined(SQLITE_ENABLE_MEMSYS5)
      sqlite3_config(SQLITE_CONFIG_HEAP, malloc((int)szHeap), (int)szHeap, 64);
#endif



















    }
  }
  if( i<argc ){
#if defined(SQLITE_OS_OS2) && SQLITE_OS_OS2
    data.zDbFilename = (const char *)convertCpPathToUtf8( argv[i++] );
#else
    data.zDbFilename = argv[i++];
................................................................................
      return 0;
    }else if( strcmp(z,"-interactive")==0 ){
      stdin_is_interactive = 1;
    }else if( strcmp(z,"-batch")==0 ){
      stdin_is_interactive = 0;
    }else if( strcmp(z,"-heap")==0 ){
      i++;




    }else if( strcmp(z,"-help")==0 || strcmp(z, "--help")==0 ){
      usage(1);
    }else{
      fprintf(stderr,"%s: Error: unknown option: %s\n", Argv0, z);
      fprintf(stderr,"Use -help for a list of options.\n");
      return 1;
    }

  char nullvalue[20];    /* The text to print when a NULL comes back from
                         ** the database */
  struct previous_mode_data explainPrev;
                         /* Holds the mode information just before
                         ** .explain ON */
  char outfile[FILENAME_MAX]; /* Filename for *out */
  const char *zDbFilename;    /* name of the database file */
  const char *zVfs;           /* Name of VFS to use */
  sqlite3_stmt *pStmt;   /* Current statement if any. */
  FILE *pLog;            /* Write log output here */
};

/*
** These are the allowed modes.
*/
................................................................................
        printf("\n");
      }
    }
    sqlite3_free_table(azResult);
  }else

  if( c=='t' && n>=8 && strncmp(azArg[0], "testctrl", n)==0 && nArg>=2 ){
    static const struct {
       const char *zCtrlName;   /* Name of a test-control option */
       int ctrlCode;            /* Integer code for that option */
    } aCtrl[] = {
      { "prng_save",             SQLITE_TESTCTRL_PRNG_SAVE              },
      { "prng_restore",          SQLITE_TESTCTRL_PRNG_RESTORE           },
      { "prng_reset",            SQLITE_TESTCTRL_PRNG_RESET             },
      { "bitvec_test",           SQLITE_TESTCTRL_BITVEC_TEST            },
      { "fault_install",         SQLITE_TESTCTRL_FAULT_INSTALL          },
      { "benign_malloc_hooks",   SQLITE_TESTCTRL_BENIGN_MALLOC_HOOKS    },
      { "pending_byte",          SQLITE_TESTCTRL_PENDING_BYTE           },
      { "assert",                SQLITE_TESTCTRL_ASSERT                 },
      { "always",                SQLITE_TESTCTRL_ALWAYS                 },
      { "reserve",               SQLITE_TESTCTRL_RESERVE                },
      { "optimizations",         SQLITE_TESTCTRL_OPTIMIZATIONS          },
      { "iskeyword",             SQLITE_TESTCTRL_ISKEYWORD              },
      { "pghdrsz",               SQLITE_TESTCTRL_PGHDRSZ                },
      { "scratchmalloc",         SQLITE_TESTCTRL_SCRATCHMALLOC          },
    };
    int testctrl = -1;
    int rc = 0;
    int i, n;
    open_db(p);

    /* convert testctrl text option to value. allow any unique prefix

















    ** of the option name, or a numerical value. */
    n = strlen(azArg[1]);
    for(i=0; i<sizeof(aCtrl)/sizeof(aCtrl[0]); i++){
      if( strncmp(azArg[1], aCtrl[i].zCtrlName, n)==0 ){
        if( testctrl<0 ){
          testctrl = aCtrl[i].ctrlCode;
        }else{
          fprintf(stderr, "ambiguous option name: \"%s\"\n", azArg[i]);
          testctrl = -1;
          break;
        }
      }
    }
    if( testctrl<0 ) testctrl = atoi(azArg[1]);
    if( (testctrl<SQLITE_TESTCTRL_FIRST) || (testctrl>SQLITE_TESTCTRL_LAST) ){
      fprintf(stderr,"Error: invalid testctrl option: %s\n", azArg[1]);
    }else{
      switch(testctrl){

        /* sqlite3_test_control(int, db, int) */
        case SQLITE_TESTCTRL_OPTIMIZATIONS:
        case SQLITE_TESTCTRL_RESERVE:             
          if( nArg==3 ){
            int opt = (int)strtol(azArg[2], 0, 0);        
            rc = sqlite3_test_control(testctrl, p->db, opt);
            printf("%d (0x%08x)\n", rc, rc);
          } else {
            fprintf(stderr,"Error: testctrl %s takes a single int option\n",
                    azArg[1]);
          }
          break;

        /* sqlite3_test_control(int) */
        case SQLITE_TESTCTRL_PRNG_SAVE:           
        case SQLITE_TESTCTRL_PRNG_RESTORE:        
        case SQLITE_TESTCTRL_PRNG_RESET:
................................................................................
        /* sqlite3_test_control(int, uint) */
        case SQLITE_TESTCTRL_PENDING_BYTE:        
          if( nArg==3 ){
            unsigned int opt = (unsigned int)atoi(azArg[2]);        
            rc = sqlite3_test_control(testctrl, opt);
            printf("%d (0x%08x)\n", rc, rc);
          } else {
            fprintf(stderr,"Error: testctrl %s takes a single unsigned"
                           " int option\n", azArg[1]);
          }
          break;
          
        /* sqlite3_test_control(int, int) */
        case SQLITE_TESTCTRL_ASSERT:              
        case SQLITE_TESTCTRL_ALWAYS:              
          if( nArg==3 ){
            int opt = atoi(azArg[2]);        
            rc = sqlite3_test_control(testctrl, opt);
            printf("%d (0x%08x)\n", rc, rc);
          } else {
            fprintf(stderr,"Error: testctrl %s takes a single int option\n",
                            azArg[1]);
          }
          break;

        /* sqlite3_test_control(int, char *) */
#ifdef SQLITE_N_KEYWORD
        case SQLITE_TESTCTRL_ISKEYWORD:           
          if( nArg==3 ){
            const char *opt = azArg[2];        
            rc = sqlite3_test_control(testctrl, opt);
            printf("%d (0x%08x)\n", rc, rc);
          } else {
            fprintf(stderr,"Error: testctrl %s takes a single char * option\n",
                            azArg[1]);
          }
          break;
#endif

        case SQLITE_TESTCTRL_BITVEC_TEST:         
        case SQLITE_TESTCTRL_FAULT_INSTALL:       
        case SQLITE_TESTCTRL_BENIGN_MALLOC_HOOKS: 
        case SQLITE_TESTCTRL_SCRATCHMALLOC:       
        default:
          fprintf(stderr,"Error: CLI support for testctrl %s not implemented\n",
                  azArg[1]);
          break;
      }
    }
  }else

  if( c=='t' && n>4 && strncmp(azArg[0], "timeout", n)==0 && nArg==2 ){
    open_db(p);
    sqlite3_busy_timeout(p->db, atoi(azArg[1]));
  }else
    
  if( HAS_TIMER && c=='t' && n>=5 && strncmp(azArg[0], "timer", n)==0
   && nArg==2
  ){
    enableTimer = booleanValue(azArg[1]);
  }else
  
  if( c=='w' && strncmp(azArg[0], "width", n)==0 && nArg>1 ){
    int j;
    assert( nArg<=ArraySize(azArg) );
    for(j=1; j<nArg && j<ArraySize(p->colWidth); j++){
................................................................................
      }
      free(zSql);
      zSql = 0;
      nSql = 0;
    }
  }
  if( zSql ){
    if( !_all_whitespace(zSql) ){
      fprintf(stderr, "Error: incomplete SQL: %s\n", zSql);
    }
    free(zSql);
  }
  free(zLine);
  return errCnt;
}

/*
................................................................................
  "   -html                set output mode to HTML\n"
  "   -line                set output mode to 'line'\n"
  "   -list                set output mode to 'list'\n"
  "   -separator 'x'       set output field separator (|)\n"
  "   -stats               print memory stats before each finalize\n"
  "   -nullvalue 'text'    set text string for NULL values\n"
  "   -version             show SQLite version\n"
  "   -vfs NAME            use NAME as the default VFS\n"
#ifdef SQLITE_ENABLE_VFSTRACE
  "   -vfstrace            enable tracing of all VFS calls\n"
#endif
;
static void usage(int showDetail){
  fprintf(stderr,
      "Usage: %s [OPTIONS] FILENAME [SQL]\n"  
      "FILENAME is the name of an SQLite database. A new database is created\n"
      "if the file does not previously exist.\n", Argv0);
  if( showDetail ){
................................................................................
        if( c=='K' ){ szHeap *= 1000; break; }
        if( c=='G' ){ szHeap *= 1000000000; break; }
      }
      if( szHeap>0x7fff0000 ) szHeap = 0x7fff0000;
#if defined(SQLITE_ENABLE_MEMSYS3) || defined(SQLITE_ENABLE_MEMSYS5)
      sqlite3_config(SQLITE_CONFIG_HEAP, malloc((int)szHeap), (int)szHeap, 64);
#endif
#ifdef SQLITE_ENABLE_VFSTRACE
    }else if( strcmp(argv[i],"-vfstrace")==0 ){
      extern int vfstrace_register(
         const char *zTraceName,
         const char *zOldVfsName,
         int (*xOut)(const char*,void*),
         void *pOutArg,
         int makeDefault
      );
      vfstrace_register("trace",0,(int(*)(const char*,void*))fputs,stderr,1);
#endif
    }else if( strcmp(argv[i],"-vfs")==0 ){
      sqlite3_vfs *pVfs = sqlite3_vfs_find(argv[++i]);
      if( pVfs ){
        sqlite3_vfs_register(pVfs, 1);
      }else{
        fprintf(stderr, "no such VFS: \"%s\"\n", argv[i]);
        exit(1);
      }
    }
  }
  if( i<argc ){
#if defined(SQLITE_OS_OS2) && SQLITE_OS_OS2
    data.zDbFilename = (const char *)convertCpPathToUtf8( argv[i++] );
#else
    data.zDbFilename = argv[i++];
................................................................................
      return 0;
    }else if( strcmp(z,"-interactive")==0 ){
      stdin_is_interactive = 1;
    }else if( strcmp(z,"-batch")==0 ){
      stdin_is_interactive = 0;
    }else if( strcmp(z,"-heap")==0 ){
      i++;
    }else if( strcmp(z,"-vfs")==0 ){
      i++;
    }else if( strcmp(z,"-vfstrace")==0 ){
      i++;
    }else if( strcmp(z,"-help")==0 || strcmp(z, "--help")==0 ){
      usage(1);
    }else{
      fprintf(stderr,"%s: Error: unknown option: %s\n", Argv0, z);
      fprintf(stderr,"Use -help for a list of options.\n");
      return 1;
    }

** ^The xCurrentTimeInt64() method returns, as an integer, the Julian
** Day Number multipled by 86400000 (the number of milliseconds in 
** a 24-hour day).  
** ^SQLite will use the xCurrentTimeInt64() method to get the current
** date and time if that method is available (if iVersion is 2 or 
** greater and the function pointer is not NULL) and will fall back
** to xCurrentTime() if xCurrentTimeInt64() is unavailable.












*/
typedef struct sqlite3_vfs sqlite3_vfs;
struct sqlite3_vfs {
  int iVersion;            /* Structure version number (currently 2) */
  int szOsFile;            /* Size of subclassed sqlite3_file */
  int mxPathname;          /* Maximum file pathname length */
  sqlite3_vfs *pNext;      /* Next registered VFS */
  const char *zName;       /* Name of this virtual file system */
  void *pAppData;          /* Pointer to application-specific data */
  int (*xOpen)(sqlite3_vfs*, const char *zName, sqlite3_file*,
               int flags, int *pOutFlags);
................................................................................
  /*
  ** The methods above are in version 1 of the sqlite_vfs object
  ** definition.  Those that follow are added in version 2 or later
  */
  int (*xCurrentTimeInt64)(sqlite3_vfs*, sqlite3_int64*);
  /*
  ** The methods above are in versions 1 and 2 of the sqlite_vfs object.







  ** New fields may be appended in figure versions.  The iVersion
  ** value will increment whenever this happens. 
  */
};

/*
** CAPI3REF: Flags for the xAccess VFS method
................................................................................
** ^If the first pointer (the memory pointer) is NULL, then SQLite reverts
** to using its default memory allocator (the system malloc() implementation),
** undoing any prior invocation of [SQLITE_CONFIG_MALLOC].  ^If the
** memory pointer is not NULL and either [SQLITE_ENABLE_MEMSYS3] or
** [SQLITE_ENABLE_MEMSYS5] are defined, then the alternative memory
** allocator is engaged to handle all of SQLites memory allocation needs.
** The first pointer (the memory pointer) must be aligned to an 8-byte
** boundary or subsequent behavior of SQLite will be undefined.</dd>


**
** <dt>SQLITE_CONFIG_MUTEX</dt>
** <dd> ^(This option takes a single argument which is a pointer to an
** instance of the [sqlite3_mutex_methods] structure.  The argument specifies
** alternative low-level mutex routines to be used in place
** the mutex routines built into SQLite.)^  ^SQLite makes a copy of the
** content of the [sqlite3_mutex_methods] structure before the call to

** ^The xCurrentTimeInt64() method returns, as an integer, the Julian
** Day Number multipled by 86400000 (the number of milliseconds in 
** a 24-hour day).  
** ^SQLite will use the xCurrentTimeInt64() method to get the current
** date and time if that method is available (if iVersion is 2 or 
** greater and the function pointer is not NULL) and will fall back
** to xCurrentTime() if xCurrentTimeInt64() is unavailable.
**
** ^The xSetSystemCall(), xGetSystemCall(), and xNestSystemCall() interfaces
** are not used by the SQLite core.  These optional interfaces are provided
** by some VFSes to facilitate testing of the VFS code. By overriding 
** system calls with functions under its control, a test program can
** simulate faults and error conditions that would otherwise be difficult
** or impossible to induce.  The set of system calls that can be overridden
** varies from one VFS to another, and from one version of the same VFS to the
** next.  Applications that use these interfaces must be prepared for any
** or all of these interfaces to be NULL or for their behavior to change
** from one release to the next.  Applications must not attempt to access
** any of these methods if the iVersion of the VFS is less than 3.
*/
typedef struct sqlite3_vfs sqlite3_vfs;
struct sqlite3_vfs {
  int iVersion;            /* Structure version number (currently 3) */
  int szOsFile;            /* Size of subclassed sqlite3_file */
  int mxPathname;          /* Maximum file pathname length */
  sqlite3_vfs *pNext;      /* Next registered VFS */
  const char *zName;       /* Name of this virtual file system */
  void *pAppData;          /* Pointer to application-specific data */
  int (*xOpen)(sqlite3_vfs*, const char *zName, sqlite3_file*,
               int flags, int *pOutFlags);
................................................................................
  /*
  ** The methods above are in version 1 of the sqlite_vfs object
  ** definition.  Those that follow are added in version 2 or later
  */
  int (*xCurrentTimeInt64)(sqlite3_vfs*, sqlite3_int64*);
  /*
  ** The methods above are in versions 1 and 2 of the sqlite_vfs object.
  ** Those below are for version 3 and greater.
  */
  int (*xSetSystemCall)(sqlite3_vfs*, const char *zName, void *pFunc);
  void *(*xGetSystemCall)(sqlite3_vfs*, const char *zName);
  const char *(*xNextSystemCall)(sqlite3_vfs*, const char *zName);
  /*
  ** The methods above are in versions 1 through 3 of the sqlite_vfs object.
  ** New fields may be appended in figure versions.  The iVersion
  ** value will increment whenever this happens. 
  */
};

/*
** CAPI3REF: Flags for the xAccess VFS method
................................................................................
** ^If the first pointer (the memory pointer) is NULL, then SQLite reverts
** to using its default memory allocator (the system malloc() implementation),
** undoing any prior invocation of [SQLITE_CONFIG_MALLOC].  ^If the
** memory pointer is not NULL and either [SQLITE_ENABLE_MEMSYS3] or
** [SQLITE_ENABLE_MEMSYS5] are defined, then the alternative memory
** allocator is engaged to handle all of SQLites memory allocation needs.
** The first pointer (the memory pointer) must be aligned to an 8-byte
** boundary or subsequent behavior of SQLite will be undefined.
** The minimum allocation size is capped at 2^12. Reasonable values
** for the minimum allocation size are 2^5 through 2^8.</dd>
**
** <dt>SQLITE_CONFIG_MUTEX</dt>
** <dd> ^(This option takes a single argument which is a pointer to an
** instance of the [sqlite3_mutex_methods] structure.  The argument specifies
** alternative low-level mutex routines to be used in place
** the mutex routines built into SQLite.)^  ^SQLite makes a copy of the
** content of the [sqlite3_mutex_methods] structure before the call to

*/
struct Expr {
  u8 op;                 /* Operation performed by this node */
  char affinity;         /* The affinity of the column or 0 if not a column */
  u16 flags;             /* Various flags.  EP_* See below */
  union {
    char *zToken;          /* Token value. Zero terminated and dequoted */
    int iValue;            /* Integer value if EP_IntValue */
  } u;

  /* If the EP_TokenOnly flag is set in the Expr.flags mask, then no
  ** space is allocated for the fields below this point. An attempt to
  ** access them will result in a segfault or malfunction. 
  *********************************************************************/

................................................................................
CollSeq *sqlite3LocateCollSeq(Parse *pParse, const char*zName);
CollSeq *sqlite3ExprCollSeq(Parse *pParse, Expr *pExpr);
Expr *sqlite3ExprSetColl(Expr*, CollSeq*);
Expr *sqlite3ExprSetCollByToken(Parse *pParse, Expr*, Token*);
int sqlite3CheckCollSeq(Parse *, CollSeq *);
int sqlite3CheckObjectName(Parse *, const char *);
void sqlite3VdbeSetChanges(sqlite3 *, int);





const void *sqlite3ValueText(sqlite3_value*, u8);
int sqlite3ValueBytes(sqlite3_value*, u8);
void sqlite3ValueSetStr(sqlite3_value*, int, const void *,u8, 
                        void(*)(void*));
void sqlite3ValueFree(sqlite3_value*);
sqlite3_value *sqlite3ValueNew(sqlite3 *);

*/
struct Expr {
  u8 op;                 /* Operation performed by this node */
  char affinity;         /* The affinity of the column or 0 if not a column */
  u16 flags;             /* Various flags.  EP_* See below */
  union {
    char *zToken;          /* Token value. Zero terminated and dequoted */
    int iValue;            /* Non-negative integer value if EP_IntValue */
  } u;

  /* If the EP_TokenOnly flag is set in the Expr.flags mask, then no
  ** space is allocated for the fields below this point. An attempt to
  ** access them will result in a segfault or malfunction. 
  *********************************************************************/

................................................................................
CollSeq *sqlite3LocateCollSeq(Parse *pParse, const char*zName);
CollSeq *sqlite3ExprCollSeq(Parse *pParse, Expr *pExpr);
Expr *sqlite3ExprSetColl(Expr*, CollSeq*);
Expr *sqlite3ExprSetCollByToken(Parse *pParse, Expr*, Token*);
int sqlite3CheckCollSeq(Parse *, CollSeq *);
int sqlite3CheckObjectName(Parse *, const char *);
void sqlite3VdbeSetChanges(sqlite3 *, int);
int sqlite3AddInt64(i64*,i64);
int sqlite3SubInt64(i64*,i64);
int sqlite3MulInt64(i64*,i64);
int sqlite3AbsInt32(int);

const void *sqlite3ValueText(sqlite3_value*, u8);
int sqlite3ValueBytes(sqlite3_value*, u8);
void sqlite3ValueSetStr(sqlite3_value*, int, const void *,u8, 
                        void(*)(void*));
void sqlite3ValueFree(sqlite3_value*);
sqlite3_value *sqlite3ValueNew(sqlite3 *);

#endif

#ifdef SQLITE_OMIT_TRUNCATE_OPTIMIZATION
  Tcl_SetVar2(interp, "sqlite_options", "truncate_opt", "0", TCL_GLOBAL_ONLY);
#else
  Tcl_SetVar2(interp, "sqlite_options", "truncate_opt", "1", TCL_GLOBAL_ONLY);
#endif







#ifdef SQLITE_OMIT_UTF16
  Tcl_SetVar2(interp, "sqlite_options", "utf16", "0", TCL_GLOBAL_ONLY);
#else
  Tcl_SetVar2(interp, "sqlite_options", "utf16", "1", TCL_GLOBAL_ONLY);
#endif

#endif

#ifdef SQLITE_OMIT_TRUNCATE_OPTIMIZATION
  Tcl_SetVar2(interp, "sqlite_options", "truncate_opt", "0", TCL_GLOBAL_ONLY);
#else
  Tcl_SetVar2(interp, "sqlite_options", "truncate_opt", "1", TCL_GLOBAL_ONLY);
#endif

#ifdef SQLITE_OMIT_UNIQUE_ENFORCEMENT
  Tcl_SetVar2(interp, "sqlite_options", "unique_enforcement", "0", TCL_GLOBAL_ONLY);
#else
  Tcl_SetVar2(interp, "sqlite_options", "unique_enforcement", "1", TCL_GLOBAL_ONLY);
#endif

#ifdef SQLITE_OMIT_UTF16
  Tcl_SetVar2(interp, "sqlite_options", "utf16", "0", TCL_GLOBAL_ONLY);
#else
  Tcl_SetVar2(interp, "sqlite_options", "utf16", "1", TCL_GLOBAL_ONLY);
#endif

/*
** 2011 March 16
**
** The author disclaims copyright to this source code.  In place of
** a legal notice, here is a blessing:
**
**    May you do good and not evil.
**    May you find forgiveness for yourself and forgive others.
**    May you share freely, never taking more than you give.
**
******************************************************************************
**
** This file contains code implements a VFS shim that writes diagnostic
** output for each VFS call, similar to "strace".
*/
#include <stdlib.h>
#include <string.h>
#include "sqlite3.h"

/*
** An instance of this structure is attached to the each trace VFS to
** provide auxiliary information.
*/
typedef struct vfstrace_info vfstrace_info;
struct vfstrace_info {
  sqlite3_vfs *pRootVfs;              /* The underlying real VFS */
  int (*xOut)(const char*, void*);    /* Send output here */
  void *pOutArg;                      /* First argument to xOut */
  const char *zVfsName;               /* Name of this trace-VFS */
  sqlite3_vfs *pTraceVfs;             /* Pointer back to the trace VFS */
};

/*
** The sqlite3_file object for the trace VFS
*/
typedef struct vfstrace_file vfstrace_file;
struct vfstrace_file {
  sqlite3_file base;        /* Base class.  Must be first */
  vfstrace_info *pInfo;     /* The trace-VFS to which this file belongs */
  const char *zFName;       /* Base name of the file */
  sqlite3_file *pReal;      /* The real underlying file */
};

/*
** Method declarations for vfstrace_file.
*/
static int vfstraceClose(sqlite3_file*);
static int vfstraceRead(sqlite3_file*, void*, int iAmt, sqlite3_int64 iOfst);
static int vfstraceWrite(sqlite3_file*,const void*,int iAmt, sqlite3_int64);
static int vfstraceTruncate(sqlite3_file*, sqlite3_int64 size);
static int vfstraceSync(sqlite3_file*, int flags);
static int vfstraceFileSize(sqlite3_file*, sqlite3_int64 *pSize);
static int vfstraceLock(sqlite3_file*, int);
static int vfstraceUnlock(sqlite3_file*, int);
static int vfstraceCheckReservedLock(sqlite3_file*, int *);
static int vfstraceFileControl(sqlite3_file*, int op, void *pArg);
static int vfstraceSectorSize(sqlite3_file*);
static int vfstraceDeviceCharacteristics(sqlite3_file*);
static int vfstraceShmLock(sqlite3_file*,int,int,int);
static int vfstraceShmMap(sqlite3_file*,int,int,int, void volatile **);
static void vfstraceShmBarrier(sqlite3_file*);
static int vfstraceShmUnmap(sqlite3_file*,int);

/*
** Method declarations for vfstrace_vfs.
*/
static int vfstraceOpen(sqlite3_vfs*, const char *, sqlite3_file*, int , int *);
static int vfstraceDelete(sqlite3_vfs*, const char *zName, int syncDir);
static int vfstraceAccess(sqlite3_vfs*, const char *zName, int flags, int *);
static int vfstraceFullPathname(sqlite3_vfs*, const char *zName, int, char *);
static void *vfstraceDlOpen(sqlite3_vfs*, const char *zFilename);
static void vfstraceDlError(sqlite3_vfs*, int nByte, char *zErrMsg);
static void (*vfstraceDlSym(sqlite3_vfs*,void*, const char *zSymbol))(void);
static void vfstraceDlClose(sqlite3_vfs*, void*);
static int vfstraceRandomness(sqlite3_vfs*, int nByte, char *zOut);
static int vfstraceSleep(sqlite3_vfs*, int microseconds);
static int vfstraceCurrentTime(sqlite3_vfs*, double*);
static int vfstraceGetLastError(sqlite3_vfs*, int, char*);
static int vfstraceCurrentTimeInt64(sqlite3_vfs*, sqlite3_int64*);
static int vfstraceSetSystemCall(sqlite3_vfs*, const char *zName, void *pFunc);
static void *vfstraceGetSystemCall(sqlite3_vfs*, const char *zName);
static const char *vfstraceNextSystemCall(sqlite3_vfs*, const char *zName);

/*
** Return a pointer to the tail of the pathname.  Examples:
**
**     /home/drh/xyzzy.txt -> xyzzy.txt
**     xyzzy.txt           -> xyzzy.txt
*/
static const char *fileTail(const char *z){
  int i;
  if( z==0 ) return 0;
  i = strlen(z)-1;
  while( i>0 && z[i-1]!='/' ){ i--; }
  return &z[i];
}

/*
** Send trace output defined by zFormat and subsequent arguments.
*/
static void vfstrace_printf(
  vfstrace_info *pInfo,
  const char *zFormat,
  ...
){
  va_list ap;
  char *zMsg;
  va_start(ap, zFormat);
  zMsg = sqlite3_vmprintf(zFormat, ap);
  va_end(ap);
  pInfo->xOut(zMsg, pInfo->pOutArg);
  sqlite3_free(zMsg);
}

/*
** Convert value rc into a string and print it using zFormat.  zFormat
** should have exactly one %s
*/
static void vfstrace_print_errcode(
  vfstrace_info *pInfo,
  const char *zFormat,
  int rc
){
  char zBuf[50];
  char *zVal;
  switch( rc ){
    case SQLITE_OK:         zVal = "SQLITE_OK";          break;
    case SQLITE_ERROR:      zVal = "SQLITE_ERROR";       break;
    case SQLITE_PERM:       zVal = "SQLITE_PERM";        break;
    case SQLITE_ABORT:      zVal = "SQLITE_ABORT";       break;
    case SQLITE_BUSY:       zVal = "SQLITE_BUSY";        break;
    case SQLITE_NOMEM:      zVal = "SQLITE_NOMEM";       break;
    case SQLITE_READONLY:   zVal = "SQLITE_READONLY";    break;
    case SQLITE_INTERRUPT:  zVal = "SQLITE_INTERRUPT";   break;
    case SQLITE_IOERR:      zVal = "SQLITE_IOERR";       break;
    case SQLITE_CORRUPT:    zVal = "SQLITE_CORRUPT";     break;
    case SQLITE_FULL:       zVal = "SQLITE_FULL";        break;
    case SQLITE_CANTOPEN:   zVal = "SQLITE_CANTOPEN";    break;
    case SQLITE_PROTOCOL:   zVal = "SQLITE_PROTOCOL";    break;
    case SQLITE_EMPTY:      zVal = "SQLITE_EMPTY";       break;
    case SQLITE_SCHEMA:     zVal = "SQLITE_SCHEMA";      break;
    case SQLITE_CONSTRAINT: zVal = "SQLITE_CONSTRAINT";  break;
    case SQLITE_MISMATCH:   zVal = "SQLITE_MISMATCH";    break;
    case SQLITE_MISUSE:     zVal = "SQLITE_MISUSE";      break;
    case SQLITE_NOLFS:      zVal = "SQLITE_NOLFS";       break;
    case SQLITE_IOERR_READ:         zVal = "SQLITE_IOERR_READ";         break;
    case SQLITE_IOERR_SHORT_READ:   zVal = "SQLITE_IOERR_SHORT_READ";   break;
    case SQLITE_IOERR_WRITE:        zVal = "SQLITE_IOERR_WRITE";        break;
    case SQLITE_IOERR_FSYNC:        zVal = "SQLITE_IOERR_FSYNC";        break;
    case SQLITE_IOERR_DIR_FSYNC:    zVal = "SQLITE_IOERR_DIR_FSYNC";    break;
    case SQLITE_IOERR_TRUNCATE:     zVal = "SQLITE_IOERR_TRUNCATE";     break;
    case SQLITE_IOERR_FSTAT:        zVal = "SQLITE_IOERR_FSTAT";        break;
    case SQLITE_IOERR_UNLOCK:       zVal = "SQLITE_IOERR_UNLOCK";       break;
    case SQLITE_IOERR_RDLOCK:       zVal = "SQLITE_IOERR_RDLOCK";       break;
    case SQLITE_IOERR_DELETE:       zVal = "SQLITE_IOERR_DELETE";       break;
    case SQLITE_IOERR_BLOCKED:      zVal = "SQLITE_IOERR_BLOCKED";      break;
    case SQLITE_IOERR_NOMEM:        zVal = "SQLITE_IOERR_NOMEM";        break;
    case SQLITE_IOERR_ACCESS:       zVal = "SQLITE_IOERR_ACCESS";       break;
    case SQLITE_IOERR_CHECKRESERVEDLOCK:
                               zVal = "SQLITE_IOERR_CHECKRESERVEDLOCK"; break;
    case SQLITE_IOERR_LOCK:         zVal = "SQLITE_IOERR_LOCK";         break;
    case SQLITE_IOERR_CLOSE:        zVal = "SQLITE_IOERR_CLOSE";        break;
    case SQLITE_IOERR_DIR_CLOSE:    zVal = "SQLITE_IOERR_DIR_CLOSE";    break;
    case SQLITE_IOERR_SHMOPEN:      zVal = "SQLITE_IOERR_SHMOPEN";      break;
    case SQLITE_IOERR_SHMSIZE:      zVal = "SQLITE_IOERR_SHMSIZE";      break;
    case SQLITE_IOERR_SHMLOCK:      zVal = "SQLITE_IOERR_SHMLOCK";      break;
    case SQLITE_LOCKED_SHAREDCACHE: zVal = "SQLITE_LOCKED_SHAREDCACHE"; break;
    case SQLITE_BUSY_RECOVERY:      zVal = "SQLITE_BUSY_RECOVERY";      break;
    case SQLITE_CANTOPEN_NOTEMPDIR: zVal = "SQLITE_CANTOPEN_NOTEMPDIR"; break;
    default: {
       sqlite3_snprintf(sizeof(zBuf), zBuf, "%d", rc);
       zVal = zBuf;
       break;
    }
  }
  vfstrace_printf(pInfo, zFormat, zVal);
}

/*
** Append to a buffer.
*/
static void strappend(char *z, int *pI, const char *zAppend){
  int i = *pI;
  while( zAppend[0] ){ z[i++] = *(zAppend++); }
  z[i] = 0;
  *pI = i;
}

/*
** Close an vfstrace-file.
*/
static int vfstraceClose(sqlite3_file *pFile){
  vfstrace_file *p = (vfstrace_file *)pFile;
  vfstrace_info *pInfo = p->pInfo;
  int rc;
  vfstrace_printf(pInfo, "%s.xClose(%s)", pInfo->zVfsName, p->zFName);
  rc = p->pReal->pMethods->xClose(p->pReal);
  vfstrace_print_errcode(pInfo, " -> %s\n", rc);
  if( rc==SQLITE_OK ){
    sqlite3_free((void*)p->base.pMethods);
    p->base.pMethods = 0;
  }
  return rc;
}

/*
** Read data from an vfstrace-file.
*/
static int vfstraceRead(
  sqlite3_file *pFile, 
  void *zBuf, 
  int iAmt, 
  sqlite_int64 iOfst
){
  vfstrace_file *p = (vfstrace_file *)pFile;
  vfstrace_info *pInfo = p->pInfo;
  int rc;
  vfstrace_printf(pInfo, "%s.xRead(%s,n=%d,ofst=%lld)",
                  pInfo->zVfsName, p->zFName, iAmt, iOfst);
  rc = p->pReal->pMethods->xRead(p->pReal, zBuf, iAmt, iOfst);
  vfstrace_print_errcode(pInfo, " -> %s\n", rc);
  return rc;
}

/*
** Write data to an vfstrace-file.
*/
static int vfstraceWrite(
  sqlite3_file *pFile, 
  const void *zBuf, 
  int iAmt, 
  sqlite_int64 iOfst
){
  vfstrace_file *p = (vfstrace_file *)pFile;
  vfstrace_info *pInfo = p->pInfo;
  int rc;
  vfstrace_printf(pInfo, "%s.xWrite(%s,n=%d,ofst=%lld)",
                  pInfo->zVfsName, p->zFName, iAmt, iOfst);
  rc = p->pReal->pMethods->xWrite(p->pReal, zBuf, iAmt, iOfst);
  vfstrace_print_errcode(pInfo, " -> %s\n", rc);
  return rc;
}

/*
** Truncate an vfstrace-file.
*/
static int vfstraceTruncate(sqlite3_file *pFile, sqlite_int64 size){
  vfstrace_file *p = (vfstrace_file *)pFile;
  vfstrace_info *pInfo = p->pInfo;
  int rc;
  vfstrace_printf(pInfo, "%s.xTruncate(%s,%lld)", pInfo->zVfsName, p->zFName,
                  size);
  rc = p->pReal->pMethods->xTruncate(p->pReal, size);
  vfstrace_printf(pInfo, " -> %d\n", rc);
  return rc;
}

/*
** Sync an vfstrace-file.
*/
static int vfstraceSync(sqlite3_file *pFile, int flags){
  vfstrace_file *p = (vfstrace_file *)pFile;
  vfstrace_info *pInfo = p->pInfo;
  int rc;
  int i;
  char zBuf[100];
  memcpy(zBuf, "|0", 3);
  i = 0;
  if( flags & SQLITE_SYNC_FULL )        strappend(zBuf, &i, "|FULL");
  else if( flags & SQLITE_SYNC_NORMAL ) strappend(zBuf, &i, "|NORMAL");
  if( flags & SQLITE_SYNC_DATAONLY )    strappend(zBuf, &i, "|DATAONLY");
  if( flags & ~(SQLITE_SYNC_FULL|SQLITE_SYNC_DATAONLY) ){
    sqlite3_snprintf(sizeof(zBuf)-i, &zBuf[i], "|0x%x", flags);
  }
  vfstrace_printf(pInfo, "%s.xSync(%s,%s)", pInfo->zVfsName, p->zFName,
                  &zBuf[1]);
  rc = p->pReal->pMethods->xSync(p->pReal, flags);
  vfstrace_printf(pInfo, " -> %d\n", rc);
  return rc;
}

/*
** Return the current file-size of an vfstrace-file.
*/
static int vfstraceFileSize(sqlite3_file *pFile, sqlite_int64 *pSize){
  vfstrace_file *p = (vfstrace_file *)pFile;
  vfstrace_info *pInfo = p->pInfo;
  int rc;
  vfstrace_printf(pInfo, "%s.xFileSize(%s)", pInfo->zVfsName, p->zFName);
  rc = p->pReal->pMethods->xFileSize(p->pReal, pSize);
  vfstrace_print_errcode(pInfo, " -> %s,", rc);
  vfstrace_printf(pInfo, " size=%lld\n", *pSize);
  return rc;
}

/*
** Return the name of a lock.
*/
static const char *lockName(int eLock){
  const char *azLockNames[] = {
     "NONE", "SHARED", "RESERVED", "PENDING", "EXCLUSIVE"
  };
  if( eLock<0 || eLock>=sizeof(azLockNames)/sizeof(azLockNames[0]) ){
    return "???";
  }else{
    return azLockNames[eLock];
  }
}

/*
** Lock an vfstrace-file.
*/
static int vfstraceLock(sqlite3_file *pFile, int eLock){
  vfstrace_file *p = (vfstrace_file *)pFile;
  vfstrace_info *pInfo = p->pInfo;
  int rc;
  vfstrace_printf(pInfo, "%s.xLock(%s,%s)", pInfo->zVfsName, p->zFName,
                  lockName(eLock));
  rc = p->pReal->pMethods->xLock(p->pReal, eLock);
  vfstrace_print_errcode(pInfo, " -> %s\n", rc);
  return rc;
}

/*
** Unlock an vfstrace-file.
*/
static int vfstraceUnlock(sqlite3_file *pFile, int eLock){
  vfstrace_file *p = (vfstrace_file *)pFile;
  vfstrace_info *pInfo = p->pInfo;
  int rc;
  vfstrace_printf(pInfo, "%s.xUnlock(%s,%s)", pInfo->zVfsName, p->zFName,
                  lockName(eLock));
  rc = p->pReal->pMethods->xUnlock(p->pReal, eLock);
  vfstrace_print_errcode(pInfo, " -> %s\n", rc);
  return rc;
}

/*
** Check if another file-handle holds a RESERVED lock on an vfstrace-file.
*/
static int vfstraceCheckReservedLock(sqlite3_file *pFile, int *pResOut){
  vfstrace_file *p = (vfstrace_file *)pFile;
  vfstrace_info *pInfo = p->pInfo;
  int rc;
  vfstrace_printf(pInfo, "%s.xCheckReservedLock(%s,%d)", 
                  pInfo->zVfsName, p->zFName);
  rc = p->pReal->pMethods->xCheckReservedLock(p->pReal, pResOut);
  vfstrace_print_errcode(pInfo, " -> %s", rc);
  vfstrace_printf(pInfo, ", out=%d\n", *pResOut);
  return rc;
}

/*
** File control method. For custom operations on an vfstrace-file.
*/
static int vfstraceFileControl(sqlite3_file *pFile, int op, void *pArg){
  vfstrace_file *p = (vfstrace_file *)pFile;
  vfstrace_info *pInfo = p->pInfo;
  int rc;
  char zBuf[100];
  char *zOp;
  switch( op ){
    case SQLITE_FCNTL_LOCKSTATE:    zOp = "LOCKSTATE";          break;
    case SQLITE_GET_LOCKPROXYFILE:  zOp = "GET_LOCKPROXYFILE";  break;
    case SQLITE_SET_LOCKPROXYFILE:  zOp = "SET_LOCKPROXYFILE";  break;
    case SQLITE_LAST_ERRNO:         zOp = "LAST_ERRNO";         break;
    case SQLITE_FCNTL_SIZE_HINT: {
      sqlite3_snprintf(sizeof(zBuf), zBuf, "SIZE_HINT,%lld",
                       *(sqlite3_int64*)pArg);
      zOp = zBuf;
      break;
    }
    case SQLITE_FCNTL_CHUNK_SIZE: {
      sqlite3_snprintf(sizeof(zBuf), zBuf, "CHUNK_SIZE,%d", *(int*)pArg);
      zOp = zBuf;
      break;
    }
    case SQLITE_FCNTL_FILE_POINTER: zOp = "FILE_POINTER";       break;
    case SQLITE_FCNTL_SYNC_OMITTED: zOp = "SYNC_OMITTED";       break;
    case 0xca093fa0:                zOp = "DB_UNCHANGED";       break;
    default: {
      sqlite3_snprintf(sizeof zBuf, zBuf, "%d", op);
      zOp = zBuf;
      break;
    }
  }
  vfstrace_printf(pInfo, "%s.xFileControl(%s,%s)",
                  pInfo->zVfsName, p->zFName, zOp);
  rc = p->pReal->pMethods->xFileControl(p->pReal, op, pArg);
  vfstrace_print_errcode(pInfo, " -> %s\n", rc);
  return rc;
}

/*
** Return the sector-size in bytes for an vfstrace-file.
*/
static int vfstraceSectorSize(sqlite3_file *pFile){
  vfstrace_file *p = (vfstrace_file *)pFile;
  vfstrace_info *pInfo = p->pInfo;
  int rc;
  vfstrace_printf(pInfo, "%s.xSectorSize(%s)", pInfo->zVfsName, p->zFName);
  rc = p->pReal->pMethods->xSectorSize(p->pReal);
  vfstrace_printf(pInfo, " -> %d\n", rc);
  return rc;
}

/*
** Return the device characteristic flags supported by an vfstrace-file.
*/
static int vfstraceDeviceCharacteristics(sqlite3_file *pFile){
  vfstrace_file *p = (vfstrace_file *)pFile;
  vfstrace_info *pInfo = p->pInfo;
  int rc;
  vfstrace_printf(pInfo, "%s.xDeviceCharacteristics(%s)",
                  pInfo->zVfsName, p->zFName);
  rc = p->pReal->pMethods->xDeviceCharacteristics(p->pReal);
  vfstrace_printf(pInfo, " -> 0x%08x\n", rc);
  return rc;
}

/*
** Shared-memory operations.
*/
static int vfstraceShmLock(sqlite3_file *pFile, int ofst, int n, int flags){
  vfstrace_file *p = (vfstrace_file *)pFile;
  vfstrace_info *pInfo = p->pInfo;
  int rc;
  char zLck[100];
  int i = 0;
  memcpy(zLck, "|0", 3);
  if( flags & SQLITE_SHM_UNLOCK )    strappend(zLck, &i, "|UNLOCK");
  if( flags & SQLITE_SHM_LOCK )      strappend(zLck, &i, "|LOCK");
  if( flags & SQLITE_SHM_SHARED )    strappend(zLck, &i, "|SHARED");
  if( flags & SQLITE_SHM_EXCLUSIVE ) strappend(zLck, &i, "|EXCLUSIVE");
  if( flags & ~(0xf) ){
     sqlite3_snprintf(sizeof(zLck)-i, &zLck[i], "|0x%x", flags);
  }
  vfstrace_printf(pInfo, "%s.xShmLock(%s,ofst=%d,n=%d,%s)",
                  pInfo->zVfsName, p->zFName, ofst, n, &zLck[1]);
  rc = p->pReal->pMethods->xShmLock(p->pReal, ofst, n, flags);
  vfstrace_print_errcode(pInfo, " -> %s\n", rc);
  return rc;
}
static int vfstraceShmMap(
  sqlite3_file *pFile, 
  int iRegion, 
  int szRegion, 
  int isWrite, 
  void volatile **pp
){
  vfstrace_file *p = (vfstrace_file *)pFile;
  vfstrace_info *pInfo = p->pInfo;
  int rc;
  vfstrace_printf(pInfo, "%s.xShmMap(%s,iRegion=%d,szRegion=%d,isWrite=%d,*)",
                  pInfo->zVfsName, p->zFName, iRegion, szRegion, isWrite);
  rc = p->pReal->pMethods->xShmMap(p->pReal, iRegion, szRegion, isWrite, pp);
  vfstrace_print_errcode(pInfo, " -> %s\n", rc);
  return rc;
}
static void vfstraceShmBarrier(sqlite3_file *pFile){
  vfstrace_file *p = (vfstrace_file *)pFile;
  vfstrace_info *pInfo = p->pInfo;
  vfstrace_printf(pInfo, "%s.xShmBarrier(%s)\n", pInfo->zVfsName, p->zFName);
  p->pReal->pMethods->xShmBarrier(p->pReal);
}
static int vfstraceShmUnmap(sqlite3_file *pFile, int delFlag){
  vfstrace_file *p = (vfstrace_file *)pFile;
  vfstrace_info *pInfo = p->pInfo;
  int rc;
  vfstrace_printf(pInfo, "%s.xShmUnmap(%s,delFlag=%d)",
                  pInfo->zVfsName, p->zFName, delFlag);
  rc = p->pReal->pMethods->xShmUnmap(p->pReal, delFlag);
  vfstrace_print_errcode(pInfo, " -> %s\n", rc);
  return rc;
}



/*
** Open an vfstrace file handle.
*/
static int vfstraceOpen(
  sqlite3_vfs *pVfs,
  const char *zName,
  sqlite3_file *pFile,
  int flags,
  int *pOutFlags
){
  int rc;
  vfstrace_file *p = (vfstrace_file *)pFile;
  vfstrace_info *pInfo = (vfstrace_info*)pVfs->pAppData;
  sqlite3_vfs *pRoot = pInfo->pRootVfs;
  p->pInfo = pInfo;
  p->zFName = zName ? fileTail(zName) : "<temp>";
  p->pReal = (sqlite3_file *)&p[1];
  rc = pRoot->xOpen(pRoot, zName, p->pReal, flags, pOutFlags);
  vfstrace_printf(pInfo, "%s.xOpen(%s,flags=0x%x)",
                  pInfo->zVfsName, p->zFName, flags);
  if( p->pReal->pMethods ){
    sqlite3_io_methods *pNew = sqlite3_malloc( sizeof(*pNew) );
    const sqlite3_io_methods *pSub = p->pReal->pMethods;
    memset(pNew, 0, sizeof(*pNew));
    pNew->iVersion = pSub->iVersion;
    pNew->xClose = vfstraceClose;
    pNew->xRead = vfstraceRead;
    pNew->xWrite = vfstraceWrite;
    pNew->xTruncate = vfstraceTruncate;
    pNew->xSync = vfstraceSync;
    pNew->xFileSize = vfstraceFileSize;
    pNew->xLock = vfstraceLock;
    pNew->xUnlock = vfstraceUnlock;
    pNew->xCheckReservedLock = vfstraceCheckReservedLock;
    pNew->xFileControl = vfstraceFileControl;
    pNew->xSectorSize = vfstraceSectorSize;
    pNew->xDeviceCharacteristics = vfstraceDeviceCharacteristics;
    if( pNew->iVersion>=2 ){
      pNew->xShmMap = pSub->xShmMap ? vfstraceShmMap : 0;
      pNew->xShmLock = pSub->xShmLock ? vfstraceShmLock : 0;
      pNew->xShmBarrier = pSub->xShmBarrier ? vfstraceShmBarrier : 0;
      pNew->xShmUnmap = pSub->xShmUnmap ? vfstraceShmUnmap : 0;
    }
    pFile->pMethods = pNew;
  }
  vfstrace_print_errcode(pInfo, " -> %s", rc);
  if( pOutFlags ){
    vfstrace_printf(pInfo, ", outFlags=0x%x\n", *pOutFlags);
  }else{
    vfstrace_printf(pInfo, "\n");
  }
  return rc;
}

/*
** Delete the file located at zPath. If the dirSync argument is true,
** ensure the file-system modifications are synced to disk before
** returning.
*/
static int vfstraceDelete(sqlite3_vfs *pVfs, const char *zPath, int dirSync){
  vfstrace_info *pInfo = (vfstrace_info*)pVfs->pAppData;
  sqlite3_vfs *pRoot = pInfo->pRootVfs;
  int rc;
  vfstrace_printf(pInfo, "%s.xDelete(\"%s\",%d)",
                  pInfo->zVfsName, zPath, dirSync);
  rc = pRoot->xDelete(pRoot, zPath, dirSync);
  vfstrace_print_errcode(pInfo, " -> %s\n", rc);
  return rc;
}

/*
** Test for access permissions. Return true if the requested permission
** is available, or false otherwise.
*/
static int vfstraceAccess(
  sqlite3_vfs *pVfs, 
  const char *zPath, 
  int flags, 
  int *pResOut
){
  vfstrace_info *pInfo = (vfstrace_info*)pVfs->pAppData;
  sqlite3_vfs *pRoot = pInfo->pRootVfs;
  int rc;
  vfstrace_printf(pInfo, "%s.xDelete(\"%s\",%d)",
                  pInfo->zVfsName, zPath, flags);
  rc = pRoot->xAccess(pRoot, zPath, flags, pResOut);
  vfstrace_print_errcode(pInfo, " -> %s", rc);
  vfstrace_printf(pInfo, ", out=%d\n", *pResOut);
  return rc;
}

/*
** Populate buffer zOut with the full canonical pathname corresponding
** to the pathname in zPath. zOut is guaranteed to point to a buffer
** of at least (DEVSYM_MAX_PATHNAME+1) bytes.
*/
static int vfstraceFullPathname(
  sqlite3_vfs *pVfs, 
  const char *zPath, 
  int nOut, 
  char *zOut
){
  vfstrace_info *pInfo = (vfstrace_info*)pVfs->pAppData;
  sqlite3_vfs *pRoot = pInfo->pRootVfs;
  int rc;
  vfstrace_printf(pInfo, "%s.xFullPathname(\"%s\")",
                  pInfo->zVfsName, zPath);
  rc = pRoot->xFullPathname(pRoot, zPath, nOut, zOut);
  vfstrace_print_errcode(pInfo, " -> %s", rc);
  vfstrace_printf(pInfo, ", out=\"%.*s\"\n", nOut, zOut);
  return rc;
}

/*
** Open the dynamic library located at zPath and return a handle.
*/
static void *vfstraceDlOpen(sqlite3_vfs *pVfs, const char *zPath){
  vfstrace_info *pInfo = (vfstrace_info*)pVfs->pAppData;
  sqlite3_vfs *pRoot = pInfo->pRootVfs;
  vfstrace_printf(pInfo, "%s.xDlOpen(\"%s\")\n", pInfo->zVfsName, zPath);
  return pRoot->xDlOpen(pRoot, zPath);
}

/*
** Populate the buffer zErrMsg (size nByte bytes) with a human readable
** utf-8 string describing the most recent error encountered associated 
** with dynamic libraries.
*/
static void vfstraceDlError(sqlite3_vfs *pVfs, int nByte, char *zErrMsg){
  vfstrace_info *pInfo = (vfstrace_info*)pVfs->pAppData;
  sqlite3_vfs *pRoot = pInfo->pRootVfs;
  vfstrace_printf(pInfo, "%s.xDlError(%d)", pInfo->zVfsName, nByte);
  pRoot->xDlError(pRoot, nByte, zErrMsg);
  vfstrace_printf(pInfo, " -> \"%s\"", zErrMsg);
}

/*
** Return a pointer to the symbol zSymbol in the dynamic library pHandle.
*/
static void (*vfstraceDlSym(sqlite3_vfs *pVfs,void *p,const char *zSym))(void){
  vfstrace_info *pInfo = (vfstrace_info*)pVfs->pAppData;
  sqlite3_vfs *pRoot = pInfo->pRootVfs;
  vfstrace_printf(pInfo, "%s.xDlSym(\"%s\")\n", pInfo->zVfsName, zSym);
  return pRoot->xDlSym(pRoot, p, zSym);
}

/*
** Close the dynamic library handle pHandle.
*/
static void vfstraceDlClose(sqlite3_vfs *pVfs, void *pHandle){
  vfstrace_info *pInfo = (vfstrace_info*)pVfs->pAppData;
  sqlite3_vfs *pRoot = pInfo->pRootVfs;
  vfstrace_printf(pInfo, "%s.xDlOpen()\n", pInfo->zVfsName);
  pRoot->xDlClose(pRoot, pHandle);
}

/*
** Populate the buffer pointed to by zBufOut with nByte bytes of 
** random data.
*/
static int vfstraceRandomness(sqlite3_vfs *pVfs, int nByte, char *zBufOut){
  vfstrace_info *pInfo = (vfstrace_info*)pVfs->pAppData;
  sqlite3_vfs *pRoot = pInfo->pRootVfs;
  vfstrace_printf(pInfo, "%s.xRandomness(%d)\n", pInfo->zVfsName, nByte);
  return pRoot->xRandomness(pRoot, nByte, zBufOut);
}

/*
** Sleep for nMicro microseconds. Return the number of microseconds 
** actually slept.
*/
static int vfstraceSleep(sqlite3_vfs *pVfs, int nMicro){
  vfstrace_info *pInfo = (vfstrace_info*)pVfs->pAppData;
  sqlite3_vfs *pRoot = pInfo->pRootVfs;
  return pRoot->xSleep(pRoot, nMicro);
}

/*
** Return the current time as a Julian Day number in *pTimeOut.
*/
static int vfstraceCurrentTime(sqlite3_vfs *pVfs, double *pTimeOut){
  vfstrace_info *pInfo = (vfstrace_info*)pVfs->pAppData;
  sqlite3_vfs *pRoot = pInfo->pRootVfs;
  return pRoot->xCurrentTime(pRoot, pTimeOut);
}
static int vfstraceCurrentTimeInt64(sqlite3_vfs *pVfs, sqlite3_int64 *pTimeOut){
  vfstrace_info *pInfo = (vfstrace_info*)pVfs->pAppData;
  sqlite3_vfs *pRoot = pInfo->pRootVfs;
  return pRoot->xCurrentTimeInt64(pRoot, pTimeOut);
}

/*
** Return th3 emost recent error code and message
*/
static int vfstraceGetLastError(sqlite3_vfs *pVfs, int iErr, char *zErr){
  vfstrace_info *pInfo = (vfstrace_info*)pVfs->pAppData;
  sqlite3_vfs *pRoot = pInfo->pRootVfs;
  return pRoot->xGetLastError(pRoot, iErr, zErr);
}

/*
** Override system calls.
*/
static int vfstraceSetSystemCall(
  sqlite3_vfs *pVfs,
  const char *zName,
  void *pFunc
){
  vfstrace_info *pInfo = (vfstrace_info*)pVfs->pAppData;
  sqlite3_vfs *pRoot = pInfo->pRootVfs;
  return pRoot->xSetSystemCall(pRoot, zName, pFunc);
}
static void *vfstraceGetSystemCall(sqlite3_vfs *pVfs, const char *zName){
  vfstrace_info *pInfo = (vfstrace_info*)pVfs->pAppData;
  sqlite3_vfs *pRoot = pInfo->pRootVfs;
  return pRoot->xGetSystemCall(pRoot, zName);
}
static const char *vfstraceNextSystemCall(sqlite3_vfs *pVfs, const char *zName){
  vfstrace_info *pInfo = (vfstrace_info*)pVfs->pAppData;
  sqlite3_vfs *pRoot = pInfo->pRootVfs;
  return pRoot->xNextSystemCall(pRoot, zName);
}


/*
** Clients invoke this routine to construct a new trace-vfs shim.
**
** Return SQLITE_OK on success.  
**
** SQLITE_NOMEM is returned in the case of a memory allocation error.
** SQLITE_NOTFOUND is returned if zOldVfsName does not exist.
*/
int vfstrace_register(
   const char *zTraceName,           /* Name of the newly constructed VFS */
   const char *zOldVfsName,          /* Name of the underlying VFS */
   int (*xOut)(const char*,void*),   /* Output routine.  ex: fputs */
   void *pOutArg,                    /* 2nd argument to xOut.  ex: stderr */
   int makeDefault                   /* True to make the new VFS the default */
){
  sqlite3_vfs *pNew;
  sqlite3_vfs *pRoot;
  vfstrace_info *pInfo;
  int nName;
  int nByte;

  pRoot = sqlite3_vfs_find(zOldVfsName);
  if( pRoot==0 ) return SQLITE_NOTFOUND;
  nName = strlen(zTraceName);
  nByte = sizeof(*pNew) + sizeof(*pInfo) + nName + 1;
  pNew = sqlite3_malloc( nByte );
  if( pNew==0 ) return SQLITE_NOMEM;
  memset(pNew, 0, nByte);
  pInfo = (vfstrace_info*)&pNew[1];
  pNew->iVersion = pRoot->iVersion;
  pNew->szOsFile = pRoot->szOsFile + sizeof(vfstrace_file);
  pNew->mxPathname = pRoot->mxPathname;
  pNew->zName = (char*)&pInfo[1];
  memcpy((char*)&pInfo[1], zTraceName, nName+1);
  pNew->pAppData = pInfo;
  pNew->xOpen = vfstraceOpen;
  pNew->xDelete = vfstraceDelete;
  pNew->xAccess = vfstraceAccess;
  pNew->xFullPathname = vfstraceFullPathname;
  pNew->xDlOpen = pRoot->xDlOpen==0 ? 0 : vfstraceDlOpen;
  pNew->xDlError = pRoot->xDlError==0 ? 0 : vfstraceDlError;
  pNew->xDlSym = pRoot->xDlSym==0 ? 0 : vfstraceDlSym;
  pNew->xDlClose = pRoot->xDlClose==0 ? 0 : vfstraceDlClose;
  pNew->xRandomness = vfstraceRandomness;
  pNew->xSleep = vfstraceSleep;
  pNew->xCurrentTime = vfstraceCurrentTime;
  pNew->xGetLastError = pRoot->xGetLastError==0 ? 0 : vfstraceGetLastError;
  if( pNew->iVersion>=2 ){
    pNew->xCurrentTimeInt64 = pRoot->xCurrentTimeInt64==0 ? 0 :
                                   vfstraceCurrentTimeInt64;
    if( pNew->iVersion>=3 ){
      pNew->xSetSystemCall = pRoot->xSetSystemCall==0 ? 0 : 
                                   vfstraceSetSystemCall;
      pNew->xGetSystemCall = pRoot->xGetSystemCall==0 ? 0 : 
                                   vfstraceGetSystemCall;
      pNew->xNextSystemCall = pRoot->xNextSystemCall==0 ? 0 : 
                                   vfstraceNextSystemCall;
    }
  }
  pInfo->pRootVfs = pRoot;
  pInfo->xOut = xOut;
  pInfo->pOutArg = pOutArg;
  pInfo->zVfsName = pNew->zName;
  pInfo->pTraceVfs = pNew;
  vfstrace_printf(pInfo, "%s.enabled_for(\"%s\")\n",
       pInfo->zVfsName, pRoot->zName);
  return sqlite3_vfs_register(pNew, makeDefault);
}

  Trigger *pTrig = pParse->pNewTrigger;   /* Trigger being finished */
  char *zName;                            /* Name of trigger */
  sqlite3 *db = pParse->db;               /* The database */
  DbFixer sFix;                           /* Fixer object */
  int iDb;                                /* Database containing the trigger */
  Token nameToken;                        /* Trigger name for error reporting */

  pTrig = pParse->pNewTrigger;
  pParse->pNewTrigger = 0;
  if( NEVER(pParse->nErr) || !pTrig ) goto triggerfinish_cleanup;
  zName = pTrig->zName;
  iDb = sqlite3SchemaToIndex(pParse->db, pTrig->pSchema);
  pTrig->step_list = pStepList;
  while( pStepList ){
    pStepList->pTrig = pTrig;

  Trigger *pTrig = pParse->pNewTrigger;   /* Trigger being finished */
  char *zName;                            /* Name of trigger */
  sqlite3 *db = pParse->db;               /* The database */
  DbFixer sFix;                           /* Fixer object */
  int iDb;                                /* Database containing the trigger */
  Token nameToken;                        /* Trigger name for error reporting */


  pParse->pNewTrigger = 0;
  if( NEVER(pParse->nErr) || !pTrig ) goto triggerfinish_cleanup;
  zName = pTrig->zName;
  iDb = sqlite3SchemaToIndex(pParse->db, pTrig->pSchema);
  pTrig->step_list = pStepList;
  while( pStepList ){
    pStepList->pTrig = pTrig;

  /* Register Allocations */
  int regRowCount = 0;   /* A count of rows changed */
  int regOldRowid;       /* The old rowid */
  int regNewRowid;       /* The new rowid */
  int regNew;
  int regOld = 0;
  int regRowSet = 0;     /* Rowset of rows to be updated */
  int regRec;            /* Register used for new table record to insert */

  memset(&sContext, 0, sizeof(sContext));
  db = pParse->db;
  if( pParse->nErr || db->mallocFailed ){
    goto update_cleanup;
  }
  assert( pTabList->nSrc==1 );
................................................................................
    pParse->nMem += pTab->nCol;
  }
  if( chngRowid || pTrigger || hasFK ){
    regNewRowid = ++pParse->nMem;
  }
  regNew = pParse->nMem + 1;
  pParse->nMem += pTab->nCol;
  regRec = ++pParse->nMem;

  /* Start the view context. */
  if( isView ){
    sqlite3AuthContextPush(pParse, &sContext, pTab->zName);
  }

  /* If we are trying to update a view, realize that view into
................................................................................
  ** with the required old.* column data.  */
  if( hasFK || pTrigger ){
    u32 oldmask = (hasFK ? sqlite3FkOldmask(pParse, pTab) : 0);
    oldmask |= sqlite3TriggerColmask(pParse, 
        pTrigger, pChanges, 0, TRIGGER_BEFORE|TRIGGER_AFTER, pTab, onError
    );
    for(i=0; i<pTab->nCol; i++){
      if( aXRef[i]<0 || oldmask==0xffffffff || (oldmask & (1<<i)) ){
        sqlite3ExprCodeGetColumnOfTable(v, pTab, iCur, i, regOld+i);
      }else{
        sqlite3VdbeAddOp2(v, OP_Null, 0, regOld+i);
      }
    }
    if( chngRowid==0 ){
      sqlite3VdbeAddOp2(v, OP_Copy, regOldRowid, regNewRowid);

  /* Register Allocations */
  int regRowCount = 0;   /* A count of rows changed */
  int regOldRowid;       /* The old rowid */
  int regNewRowid;       /* The new rowid */
  int regNew;
  int regOld = 0;
  int regRowSet = 0;     /* Rowset of rows to be updated */


  memset(&sContext, 0, sizeof(sContext));
  db = pParse->db;
  if( pParse->nErr || db->mallocFailed ){
    goto update_cleanup;
  }
  assert( pTabList->nSrc==1 );
................................................................................
    pParse->nMem += pTab->nCol;
  }
  if( chngRowid || pTrigger || hasFK ){
    regNewRowid = ++pParse->nMem;
  }
  regNew = pParse->nMem + 1;
  pParse->nMem += pTab->nCol;


  /* Start the view context. */
  if( isView ){
    sqlite3AuthContextPush(pParse, &sContext, pTab->zName);
  }

  /* If we are trying to update a view, realize that view into
................................................................................
  ** with the required old.* column data.  */
  if( hasFK || pTrigger ){
    u32 oldmask = (hasFK ? sqlite3FkOldmask(pParse, pTab) : 0);
    oldmask |= sqlite3TriggerColmask(pParse, 
        pTrigger, pChanges, 0, TRIGGER_BEFORE|TRIGGER_AFTER, pTab, onError
    );
    for(i=0; i<pTab->nCol; i++){
      if( aXRef[i]<0 || oldmask==0xffffffff || (i<32 && (oldmask & (1<<i))) ){
        sqlite3ExprCodeGetColumnOfTable(v, pTab, iCur, i, regOld+i);
      }else{
        sqlite3VdbeAddOp2(v, OP_Null, 0, regOld+i);
      }
    }
    if( chngRowid==0 ){
      sqlite3VdbeAddOp2(v, OP_Copy, regOldRowid, regNewRowid);

    testcase( c==(+1) );
  }
  return c;
}


/*
** Convert zNum to a 64-bit signed integer and write
** the value of the integer into *pNum.
** If zNum is exactly 9223372036854665808, return 2.
** This is a special case as the context will determine
** if it is too big (used as a negative).
** If zNum is not an integer or is an integer that 
** is too large to be expressed with 64 bits,
** then return 1.  Otherwise return 0.



**
** length is the number of bytes in the string (bytes, not characters).
** The string is not necessarily zero-terminated.  The encoding is
** given by enc.
*/
int sqlite3Atoi64(const char *zNum, i64 *pNum, int length, u8 enc){
  int incr = (enc==SQLITE_UTF8?1:2);
  i64 v = 0;
  int neg = 0; /* assume positive */
  int i;
  int c = 0;
  const char *zStart;
  const char *zEnd = zNum + length;
  if( enc==SQLITE_UTF16BE ) zNum++;
  while( zNum<zEnd && sqlite3Isspace(*zNum) ) zNum+=incr;
  if( zNum>=zEnd ) goto do_atoi_calc;
  if( *zNum=='-' ){
    neg = 1;
    zNum+=incr;
  }else if( *zNum=='+' ){
    zNum+=incr;
  }
do_atoi_calc:

  zStart = zNum;
  while( zNum<zEnd && zNum[0]=='0' ){ zNum+=incr; } /* Skip leading zeros. */
  for(i=0; &zNum[i]<zEnd && (c=zNum[i])>='0' && c<='9'; i+=incr){
    v = v*10 + c - '0';
  }



  *pNum = neg ? -v : v;



  testcase( i==18 );
  testcase( i==19 );
  testcase( i==20 );
  if( (c!=0 && &zNum[i]<zEnd) || (i==0 && zStart==zNum) || i>19*incr ){
    /* zNum is empty or contains non-numeric text or is longer
    ** than 19 digits (thus guaranteeing that it is too large) */
    return 1;
  }else if( i<19*incr ){
    /* Less than 19 digits, so we know that it fits in 64 bits */

    return 0;
  }else{
    /* 19-digit numbers must be no larger than 9223372036854775807 if positive
    ** or 9223372036854775808 if negative.  Note that 9223372036854665808
    ** is 2^63. Return 1 if to large */
    c=compare2pow63(zNum, incr);

    if( c==0 && neg==0 ) return 2; /* too big, exactly 9223372036854665808 */

    return c<neg ? 0 : 1;










  }
}

/*
** If zNum represents an integer that will fit in 32-bits, then set
** *pValue to that integer and return true.  Otherwise return false.
**
................................................................................
    testcase( sqlite3GlobalConfig.xLog!=0 );
    logBadConnection("invalid");
    return 0;
  }else{
    return 1;
  }
}

    testcase( c==(+1) );
  }
  return c;
}


/*
** Convert zNum to a 64-bit signed integer.
**
** If the zNum value is representable as a 64-bit twos-complement 
** integer, then write that value into *pNum and return 0.
**
** If zNum is exactly 9223372036854665808, return 2.  This special
** case is broken out because while 9223372036854665808 cannot be a 
** signed 64-bit integer, its negative -9223372036854665808 can be.
**
** If zNum is too big for a 64-bit integer and is not
** 9223372036854665808 then return 1.
**
** length is the number of bytes in the string (bytes, not characters).
** The string is not necessarily zero-terminated.  The encoding is
** given by enc.
*/
int sqlite3Atoi64(const char *zNum, i64 *pNum, int length, u8 enc){
  int incr = (enc==SQLITE_UTF8?1:2);
  u64 u = 0;
  int neg = 0; /* assume positive */
  int i;
  int c = 0;
  const char *zStart;
  const char *zEnd = zNum + length;
  if( enc==SQLITE_UTF16BE ) zNum++;
  while( zNum<zEnd && sqlite3Isspace(*zNum) ) zNum+=incr;
  if( zNum<zEnd ){
    if( *zNum=='-' ){
      neg = 1;
      zNum+=incr;
    }else if( *zNum=='+' ){
      zNum+=incr;
    }

  }
  zStart = zNum;
  while( zNum<zEnd && zNum[0]=='0' ){ zNum+=incr; } /* Skip leading zeros. */
  for(i=0; &zNum[i]<zEnd && (c=zNum[i])>='0' && c<='9'; i+=incr){
    u = u*10 + c - '0';
  }
  if( u>LARGEST_INT64 ){
    *pNum = SMALLEST_INT64;
  }else if( neg ){
    *pNum = -(i64)u;
  }else{
    *pNum = (i64)u;
  }
  testcase( i==18 );
  testcase( i==19 );
  testcase( i==20 );
  if( (c!=0 && &zNum[i]<zEnd) || (i==0 && zStart==zNum) || i>19*incr ){
    /* zNum is empty or contains non-numeric text or is longer
    ** than 19 digits (thus guaranteeing that it is too large) */
    return 1;
  }else if( i<19*incr ){
    /* Less than 19 digits, so we know that it fits in 64 bits */
    assert( u<=LARGEST_INT64 );
    return 0;
  }else{

    /* zNum is a 19-digit numbers.  Compare it against 9223372036854775808. */

    c = compare2pow63(zNum, incr);
    if( c<0 ){
      /* zNum is less than 9223372036854775808 so it fits */
      assert( u<=LARGEST_INT64 );
      return 0;
    }else if( c>0 ){
      /* zNum is greater than 9223372036854775808 so it overflows */
      return 1;
    }else{
      /* zNum is exactly 9223372036854775808.  Fits if negative.  The
      ** special case 2 overflow if positive */
      assert( u-1==LARGEST_INT64 );
      assert( (*pNum)==SMALLEST_INT64 );
      return neg ? 0 : 2;
    }
  }
}

/*
** If zNum represents an integer that will fit in 32-bits, then set
** *pValue to that integer and return true.  Otherwise return false.
**
................................................................................
    testcase( sqlite3GlobalConfig.xLog!=0 );
    logBadConnection("invalid");
    return 0;
  }else{
    return 1;
  }
}

/*
** Attempt to add, substract, or multiply the 64-bit signed value iB against
** the other 64-bit signed integer at *pA and store the result in *pA.
** Return 0 on success.  Or if the operation would have resulted in an
** overflow, leave *pA unchanged and return 1.
*/
int sqlite3AddInt64(i64 *pA, i64 iB){
  i64 iA = *pA;
  testcase( iA==0 ); testcase( iA==1 );
  testcase( iB==-1 ); testcase( iB==0 );
  if( iB>=0 ){
    testcase( iA>0 && LARGEST_INT64 - iA == iB );
    testcase( iA>0 && LARGEST_INT64 - iA == iB - 1 );
    if( iA>0 && LARGEST_INT64 - iA < iB ) return 1;
    *pA += iB;
  }else{
    testcase( iA<0 && -(iA + LARGEST_INT64) == iB + 1 );
    testcase( iA<0 && -(iA + LARGEST_INT64) == iB + 2 );
    if( iA<0 && -(iA + LARGEST_INT64) > iB + 1 ) return 1;
    *pA += iB;
  }
  return 0; 
}
int sqlite3SubInt64(i64 *pA, i64 iB){
  testcase( iB==SMALLEST_INT64+1 );
  if( iB==SMALLEST_INT64 ){
    testcase( (*pA)==(-1) ); testcase( (*pA)==0 );
    if( (*pA)>=0 ) return 1;
    *pA -= iB;
    return 0;
  }else{
    return sqlite3AddInt64(pA, -iB);
  }
}
#define TWOPOWER32 (((i64)1)<<32)
#define TWOPOWER31 (((i64)1)<<31)
int sqlite3MulInt64(i64 *pA, i64 iB){
  i64 iA = *pA;
  i64 iA1, iA0, iB1, iB0, r;

  iA1 = iA/TWOPOWER32;
  iA0 = iA % TWOPOWER32;
  iB1 = iB/TWOPOWER32;
  iB0 = iB % TWOPOWER32;
  if( iA1*iB1 != 0 ) return 1;
  assert( iA1*iB0==0 || iA0*iB1==0 );
  r = iA1*iB0 + iA0*iB1;
  testcase( r==(-TWOPOWER31)-1 );
  testcase( r==(-TWOPOWER31) );
  testcase( r==TWOPOWER31 );
  testcase( r==TWOPOWER31-1 );
  if( r<(-TWOPOWER31) || r>=TWOPOWER31 ) return 1;
  r *= TWOPOWER32;
  if( sqlite3AddInt64(&r, iA0*iB0) ) return 1;
  *pA = r;
  return 0;
}

/*
** Compute the absolute value of a 32-bit signed integer, of possible.  Or 
** if the integer has a value of -2147483648, return +2147483647
*/
int sqlite3AbsInt32(int x){
  if( x>=0 ) return x;
  if( x==(int)0x80000000 ) return 0x7fffffff;
  return -x;
}

  pOut = &aMem[pOp->p3];
  flags = pIn1->flags | pIn2->flags;
  if( (flags & MEM_Null)!=0 ) goto arithmetic_result_is_null;
  if( (pIn1->flags & pIn2->flags & MEM_Int)==MEM_Int ){
    iA = pIn1->u.i;
    iB = pIn2->u.i;
    switch( pOp->opcode ){
      case OP_Add:         iB += iA;       break;
      case OP_Subtract:    iB -= iA;       break;
      case OP_Multiply:    iB *= iA;       break;
      case OP_Divide: {
        if( iA==0 ) goto arithmetic_result_is_null;
        /* Dividing the largest possible negative 64-bit integer (1<<63) by 
        ** -1 returns an integer too large to store in a 64-bit data-type. On
        ** some architectures, the value overflows to (1<<63). On others,
        ** a SIGFPE is issued. The following statement normalizes this
        ** behavior so that all architectures behave as if integer 
        ** overflow occurred.
        */
        if( iA==-1 && iB==SMALLEST_INT64 ) iA = 1;
        iB /= iA;
        break;
      }
      default: {
        if( iA==0 ) goto arithmetic_result_is_null;
        if( iA==-1 ) iA = 1;
        iB %= iA;
        break;
      }
    }
    pOut->u.i = iB;
    MemSetTypeFlag(pOut, MEM_Int);
  }else{

    rA = sqlite3VdbeRealValue(pIn1);
    rB = sqlite3VdbeRealValue(pIn2);
    switch( pOp->opcode ){
      case OP_Add:         rB += rA;       break;
      case OP_Subtract:    rB -= rA;       break;
      case OP_Multiply:    rB *= rA;       break;
      case OP_Divide: {
................................................................................
** Store the result in register P3.
** If either input is NULL, the result is NULL.
*/
case OP_BitAnd:                 /* same as TK_BITAND, in1, in2, out3 */
case OP_BitOr:                  /* same as TK_BITOR, in1, in2, out3 */
case OP_ShiftLeft:              /* same as TK_LSHIFT, in1, in2, out3 */
case OP_ShiftRight: {           /* same as TK_RSHIFT, in1, in2, out3 */
  i64 a;

  i64 b;


  pIn1 = &aMem[pOp->p1];
  pIn2 = &aMem[pOp->p2];
  pOut = &aMem[pOp->p3];
  if( (pIn1->flags | pIn2->flags) & MEM_Null ){
    sqlite3VdbeMemSetNull(pOut);
    break;
  }
  a = sqlite3VdbeIntValue(pIn2);
  b = sqlite3VdbeIntValue(pIn1);
  switch( pOp->opcode ){
    case OP_BitAnd:      a &= b;     break;
    case OP_BitOr:       a |= b;     break;
















    case OP_ShiftLeft:   a <<= b;    break;
    default:  assert( pOp->opcode==OP_ShiftRight );
                         a >>= b;    break;





  }



  pOut->u.i = a;
  MemSetTypeFlag(pOut, MEM_Int);
  break;
}

/* Opcode: AddImm  P1 P2 * * *
** 
** Add the constant P2 to the value in register P1.
................................................................................
  ** Each type field is a varint representing the serial type of the 
  ** corresponding data element (see sqlite3VdbeSerialType()). The
  ** hdr-size field is also a varint which is the offset from the beginning
  ** of the record to data0.
  */
  nData = 0;         /* Number of bytes of data space */
  nHdr = 0;          /* Number of bytes of header space */
  nByte = 0;         /* Data space required for this record */
  nZero = 0;         /* Number of zero bytes at the end of the record */
  nField = pOp->p1;
  zAffinity = pOp->p4.z;
  assert( nField>0 && pOp->p2>0 && pOp->p2+nField<=p->nMem+1 );
  pData0 = &aMem[nField];
  nField = pOp->p2;
  pLast = &pData0[nField-1];
................................................................................
    **
    ** The second algorithm is to select a rowid at random and see if
    ** it already exists in the table.  If it does not exist, we have
    ** succeeded.  If the random rowid does exist, we select a new one
    ** and try again, up to 100 times.
    */
    assert( pC->isTable );
    cnt = 0;

#ifdef SQLITE_32BIT_ROWID
#   define MAX_ROWID 0x7fffffff
#else
    /* Some compilers complain about constants of the form 0x7fffffffffffffff.
    ** Others complain about 0x7ffffffffffffffffLL.  The following macro seems
    ** to provide the constant while making all compilers happy.

  pOut = &aMem[pOp->p3];
  flags = pIn1->flags | pIn2->flags;
  if( (flags & MEM_Null)!=0 ) goto arithmetic_result_is_null;
  if( (pIn1->flags & pIn2->flags & MEM_Int)==MEM_Int ){
    iA = pIn1->u.i;
    iB = pIn2->u.i;
    switch( pOp->opcode ){
      case OP_Add:       if( sqlite3AddInt64(&iB,iA) ) goto fp_math;  break;
      case OP_Subtract:  if( sqlite3SubInt64(&iB,iA) ) goto fp_math;  break;
      case OP_Multiply:  if( sqlite3MulInt64(&iB,iA) ) goto fp_math;  break;
      case OP_Divide: {
        if( iA==0 ) goto arithmetic_result_is_null;







        if( iA==-1 && iB==SMALLEST_INT64 ) goto fp_math;
        iB /= iA;
        break;
      }
      default: {
        if( iA==0 ) goto arithmetic_result_is_null;
        if( iA==-1 ) iA = 1;
        iB %= iA;
        break;
      }
    }
    pOut->u.i = iB;
    MemSetTypeFlag(pOut, MEM_Int);
  }else{
fp_math:
    rA = sqlite3VdbeRealValue(pIn1);
    rB = sqlite3VdbeRealValue(pIn2);
    switch( pOp->opcode ){
      case OP_Add:         rB += rA;       break;
      case OP_Subtract:    rB -= rA;       break;
      case OP_Multiply:    rB *= rA;       break;
      case OP_Divide: {
................................................................................
** Store the result in register P3.
** If either input is NULL, the result is NULL.
*/
case OP_BitAnd:                 /* same as TK_BITAND, in1, in2, out3 */
case OP_BitOr:                  /* same as TK_BITOR, in1, in2, out3 */
case OP_ShiftLeft:              /* same as TK_LSHIFT, in1, in2, out3 */
case OP_ShiftRight: {           /* same as TK_RSHIFT, in1, in2, out3 */
  i64 iA;
  u64 uA;
  i64 iB;
  u8 op;

  pIn1 = &aMem[pOp->p1];
  pIn2 = &aMem[pOp->p2];
  pOut = &aMem[pOp->p3];
  if( (pIn1->flags | pIn2->flags) & MEM_Null ){
    sqlite3VdbeMemSetNull(pOut);
    break;
  }
  iA = sqlite3VdbeIntValue(pIn2);
  iB = sqlite3VdbeIntValue(pIn1);
  op = pOp->opcode;
  if( op==OP_BitAnd ){
    iA &= iB;
  }else if( op==OP_BitOr ){
    iA |= iB;
  }else if( iB!=0 ){
    assert( op==OP_ShiftRight || op==OP_ShiftLeft );

    /* If shifting by a negative amount, shift in the other direction */
    if( iB<0 ){
      assert( OP_ShiftRight==OP_ShiftLeft+1 );
      op = 2*OP_ShiftLeft + 1 - op;
      iB = iB>(-64) ? -iB : 64;
    }

    if( iB>=64 ){
      iA = (iA>=0 || op==OP_ShiftLeft) ? 0 : -1;
    }else{
      memcpy(&uA, &iA, sizeof(uA));
      if( op==OP_ShiftLeft ){


        uA <<= iB;
      }else{
        uA >>= iB;
        /* Sign-extend on a right shift of a negative number */
        if( iA<0 ) uA |= ((((u64)0xffffffff)<<32)|0xffffffff) << (64-iB);
      }
      memcpy(&iA, &uA, sizeof(iA));
    }
  }
  pOut->u.i = iA;
  MemSetTypeFlag(pOut, MEM_Int);
  break;
}

/* Opcode: AddImm  P1 P2 * * *
** 
** Add the constant P2 to the value in register P1.
................................................................................
  ** Each type field is a varint representing the serial type of the 
  ** corresponding data element (see sqlite3VdbeSerialType()). The
  ** hdr-size field is also a varint which is the offset from the beginning
  ** of the record to data0.
  */
  nData = 0;         /* Number of bytes of data space */
  nHdr = 0;          /* Number of bytes of header space */

  nZero = 0;         /* Number of zero bytes at the end of the record */
  nField = pOp->p1;
  zAffinity = pOp->p4.z;
  assert( nField>0 && pOp->p2>0 && pOp->p2+nField<=p->nMem+1 );
  pData0 = &aMem[nField];
  nField = pOp->p2;
  pLast = &pData0[nField-1];
................................................................................
    **
    ** The second algorithm is to select a rowid at random and see if
    ** it already exists in the table.  If it does not exist, we have
    ** succeeded.  If the random rowid does exist, we select a new one
    ** and try again, up to 100 times.
    */
    assert( pC->isTable );


#ifdef SQLITE_32BIT_ROWID
#   define MAX_ROWID 0x7fffffff
#else
    /* Some compilers complain about constants of the form 0x7fffffffffffffff.
    ** Others complain about 0x7ffffffffffffffffLL.  The following macro seems
    ** to provide the constant while making all compilers happy.

** Check to see if column iCol of the given statement is valid.  If
** it is, return a pointer to the Mem for the value of that column.
** If iCol is not valid, return a pointer to a Mem which has a value
** of NULL.
*/
static Mem *columnMem(sqlite3_stmt *pStmt, int i){
  Vdbe *pVm;
  int vals;
  Mem *pOut;

  pVm = (Vdbe *)pStmt;
  if( pVm && pVm->pResultSet!=0 && i<pVm->nResColumn && i>=0 ){
    sqlite3_mutex_enter(pVm->db->mutex);
    vals = sqlite3_data_count(pStmt);
    pOut = &pVm->pResultSet[i];
  }else{
    /* If the value passed as the second argument is out of range, return
    ** a pointer to a static Mem object that contains the value SQL NULL. 
    */
    if( pVm && ALWAYS(pVm->db) ){
      sqlite3_mutex_enter(pVm->db->mutex);

** Check to see if column iCol of the given statement is valid.  If
** it is, return a pointer to the Mem for the value of that column.
** If iCol is not valid, return a pointer to a Mem which has a value
** of NULL.
*/
static Mem *columnMem(sqlite3_stmt *pStmt, int i){
  Vdbe *pVm;

  Mem *pOut;

  pVm = (Vdbe *)pStmt;
  if( pVm && pVm->pResultSet!=0 && i<pVm->nResColumn && i>=0 ){
    sqlite3_mutex_enter(pVm->db->mutex);

    pOut = &pVm->pResultSet[i];
  }else{
    /* If the value passed as the second argument is out of range, return
    ** a pointer to a static Mem object that contains the value SQL NULL. 
    */
    if( pVm && ALWAYS(pVm->db) ){
      sqlite3_mutex_enter(pVm->db->mutex);

/*
** Swap all content between two VDBE structures.
*/
void sqlite3VdbeSwap(Vdbe *pA, Vdbe *pB){
  Vdbe tmp, *pTmp;
  char *zTmp;

  tmp = *pA;
  *pA = *pB;
  *pB = tmp;
  pTmp = pA->pNext;
  pA->pNext = pB->pNext;
  pB->pNext = pTmp;
  pTmp = pA->pPrev;
................................................................................
** Also release any dynamic memory held by the VM in the Vdbe.aMem memory 
** cell array. This is necessary as the memory cell array may contain
** pointers to VdbeFrame objects, which may in turn contain pointers to
** open cursors.
*/
static void closeAllCursors(Vdbe *p){
  if( p->pFrame ){
    VdbeFrame *pFrame = p->pFrame;
    for(pFrame=p->pFrame; pFrame->pParent; pFrame=pFrame->pParent);
    sqlite3VdbeFrameRestore(pFrame);
  }
  p->pFrame = 0;
  p->nFrame = 0;

  if( p->apCsr ){
................................................................................
    /* Figure out whether to use 1, 2, 4, 6 or 8 bytes. */
#   define MAX_6BYTE ((((i64)0x00008000)<<32)-1)
    i64 i = pMem->u.i;
    u64 u;
    if( file_format>=4 && (i&1)==i ){
      return 8+(u32)i;
    }





    u = i<0 ? -i : i;

    if( u<=127 ) return 1;
    if( u<=32767 ) return 2;
    if( u<=8388607 ) return 3;
    if( u<=2147483647 ) return 4;
    if( u<=MAX_6BYTE ) return 5;
    return 6;
  }

/*
** Swap all content between two VDBE structures.
*/
void sqlite3VdbeSwap(Vdbe *pA, Vdbe *pB){
  Vdbe tmp, *pTmp;
  char *zTmp;
  assert( pA->db==pB->db );
  tmp = *pA;
  *pA = *pB;
  *pB = tmp;
  pTmp = pA->pNext;
  pA->pNext = pB->pNext;
  pB->pNext = pTmp;
  pTmp = pA->pPrev;
................................................................................
** Also release any dynamic memory held by the VM in the Vdbe.aMem memory 
** cell array. This is necessary as the memory cell array may contain
** pointers to VdbeFrame objects, which may in turn contain pointers to
** open cursors.
*/
static void closeAllCursors(Vdbe *p){
  if( p->pFrame ){
    VdbeFrame *pFrame;
    for(pFrame=p->pFrame; pFrame->pParent; pFrame=pFrame->pParent);
    sqlite3VdbeFrameRestore(pFrame);
  }
  p->pFrame = 0;
  p->nFrame = 0;

  if( p->apCsr ){
................................................................................
    /* Figure out whether to use 1, 2, 4, 6 or 8 bytes. */
#   define MAX_6BYTE ((((i64)0x00008000)<<32)-1)
    i64 i = pMem->u.i;
    u64 u;
    if( file_format>=4 && (i&1)==i ){
      return 8+(u32)i;
    }
    if( i<0 ){
      if( i<(-MAX_6BYTE) ) return 6;
      /* Previous test prevents:  u = -(-9223372036854775808) */
      u = -i;
    }else{
      u = i;
    }
    if( u<=127 ) return 1;
    if( u<=32767 ) return 2;
    if( u<=8388607 ) return 3;
    if( u<=2147483647 ) return 4;
    if( u<=MAX_6BYTE ) return 5;
    return 6;
  }

  assert( EIGHT_BYTE_ALIGNMENT(pMem) );
  flags = pMem->flags;
  if( flags & MEM_Int ){
    return pMem->u.i;
  }else if( flags & MEM_Real ){
    return doubleToInt64(pMem->r);
  }else if( flags & (MEM_Str|MEM_Blob) ){
    i64 value;
    assert( pMem->z || pMem->n==0 );
    testcase( pMem->z==0 );
    sqlite3Atoi64(pMem->z, &value, pMem->n, pMem->enc);
    return value;
  }else{
    return 0;
  }
................................................................................
    if( enc!=SQLITE_UTF8 ){
      sqlite3VdbeChangeEncoding(pVal, enc);
    }
  }else if( op==TK_UMINUS ) {
    /* This branch happens for multiple negative signs.  Ex: -(-5) */
    if( SQLITE_OK==sqlite3ValueFromExpr(db,pExpr->pLeft,enc,affinity,&pVal) ){
      sqlite3VdbeMemNumerify(pVal);
      pVal->u.i = -1 * pVal->u.i;
      /* (double)-1 In case of SQLITE_OMIT_FLOATING_POINT... */

      pVal->r = (double)-1 * pVal->r;




      sqlite3ValueApplyAffinity(pVal, affinity, enc);
    }
  }else if( op==TK_NULL ){
    pVal = sqlite3ValueNew(db);
    if( pVal==0 ) goto no_mem;
  }
#ifndef SQLITE_OMIT_BLOB_LITERAL

  assert( EIGHT_BYTE_ALIGNMENT(pMem) );
  flags = pMem->flags;
  if( flags & MEM_Int ){
    return pMem->u.i;
  }else if( flags & MEM_Real ){
    return doubleToInt64(pMem->r);
  }else if( flags & (MEM_Str|MEM_Blob) ){
    i64 value = 0;
    assert( pMem->z || pMem->n==0 );
    testcase( pMem->z==0 );
    sqlite3Atoi64(pMem->z, &value, pMem->n, pMem->enc);
    return value;
  }else{
    return 0;
  }
................................................................................
    if( enc!=SQLITE_UTF8 ){
      sqlite3VdbeChangeEncoding(pVal, enc);
    }
  }else if( op==TK_UMINUS ) {
    /* This branch happens for multiple negative signs.  Ex: -(-5) */
    if( SQLITE_OK==sqlite3ValueFromExpr(db,pExpr->pLeft,enc,affinity,&pVal) ){
      sqlite3VdbeMemNumerify(pVal);
      if( pVal->u.i==SMALLEST_INT64 ){
        pVal->flags &= MEM_Int;
        pVal->flags |= MEM_Real;
        pVal->r = (double)LARGEST_INT64;
      }else{
        pVal->u.i = -pVal->u.i;
      }
      pVal->r = -pVal->r;
      sqlite3ValueApplyAffinity(pVal, affinity, enc);
    }
  }else if( op==TK_NULL ){
    pVal = sqlite3ValueNew(db);
    if( pVal==0 ) goto no_mem;
  }
#ifndef SQLITE_OMIT_BLOB_LITERAL

  /* Allocate the iterator */
  rc = walIteratorInit(pWal, &pIter);
  if( rc!=SQLITE_OK ){
    return rc;
  }
  assert( pIter );

  mxPage = pWal->hdr.nPage;
  if( eMode!=SQLITE_CHECKPOINT_PASSIVE ) xBusy = xBusyCall;

  /* Compute in mxSafeFrame the index of the last frame of the WAL that is
  ** safe to write into the database.  Frames beyond mxSafeFrame might
  ** overwrite database pages that are in use by active readers and thus
  ** cannot be backfilled from the WAL.
  */

  /* Allocate the iterator */
  rc = walIteratorInit(pWal, &pIter);
  if( rc!=SQLITE_OK ){
    return rc;
  }
  assert( pIter );


  if( eMode!=SQLITE_CHECKPOINT_PASSIVE ) xBusy = xBusyCall;

  /* Compute in mxSafeFrame the index of the last frame of the WAL that is
  ** safe to write into the database.  Frames beyond mxSafeFrame might
  ** overwrite database pages that are in use by active readers and thus
  ** cannot be backfilled from the WAL.
  */

#ifdef SQLITE_ENABLE_STAT2
/*
** Estimate the number of rows that will be returned based on
** an equality constraint x=VALUE and where that VALUE occurs in
** the histogram data.  This only works when x is the left-most
** column of an index and sqlite_stat2 histogram data is available
** for that index.

**
** Write the estimated row count into *pnRow and return SQLITE_OK. 
** If unable to make an estimate, leave *pnRow unchanged and return
** non-zero.
**
** This routine can fail if it is unable to load a collating sequence
** required for string comparison, or if unable to allocate memory
................................................................................
  int iLower, iUpper;       /* Range of histogram regions containing pRhs */
  u8 aff;                   /* Column affinity */
  int rc;                   /* Subfunction return code */
  double nRowEst;           /* New estimate of the number of rows */

  assert( p->aSample!=0 );
  aff = p->pTable->aCol[p->aiColumn[0]].affinity;

  rc = valueFromExpr(pParse, pExpr, aff, &pRhs);
  if( rc ) goto whereEqualScanEst_cancel;



  if( pRhs==0 ) return SQLITE_NOTFOUND;
  rc = whereRangeRegion(pParse, p, pRhs, 0, &iLower);
  if( rc ) goto whereEqualScanEst_cancel;
  rc = whereRangeRegion(pParse, p, pRhs, 1, &iUpper);
  if( rc ) goto whereEqualScanEst_cancel;
  WHERETRACE(("equality scan regions: %d..%d\n", iLower, iUpper));
  if( iLower>=iUpper ){
................................................................................
#ifdef SQLITE_ENABLE_STAT2
    /* If the constraint is of the form x=VALUE and histogram
    ** data is available for column x, then it might be possible
    ** to get a better estimate on the number of rows based on
    ** VALUE and how common that value is according to the histogram.
    */
    if( nRow>(double)1 && nEq==1 && pFirstTerm!=0 ){

      if( pFirstTerm->eOperator==WO_EQ ){

        whereEqualScanEst(pParse, pProbe, pFirstTerm->pExpr->pRight, &nRow);
      }else if( pFirstTerm->eOperator==WO_IN && bInEst==0 ){
        whereInScanEst(pParse, pProbe, pFirstTerm->pExpr->x.pList, &nRow);
      }
    }
#endif /* SQLITE_ENABLE_STAT2 */

................................................................................
      sqlite3ExprCacheStore(pParse, iCur, -1, iRowidReg);
      sqlite3VdbeAddOp2(v, OP_Seek, iCur, iRowidReg);  /* Deferred seek */
    }

    /* Record the instruction used to terminate the loop. Disable 
    ** WHERE clause terms made redundant by the index range scan.
    */

    pLevel->op = bRev ? OP_Prev : OP_Next;





    pLevel->p1 = iIdxCur;
  }else

#ifndef SQLITE_OMIT_OR_OPTIMIZATION
  if( pLevel->plan.wsFlags & WHERE_MULTI_OR ){
    /* Case 4:  Two or more separately indexed terms connected by OR
    **
................................................................................
    **
    **          Return     2                # Jump back to the Gosub
    **
    **       B: <after the loop>
    **
    */
    WhereClause *pOrWc;    /* The OR-clause broken out into subterms */
    WhereTerm *pFinal;     /* Final subterm within the OR-clause. */
    SrcList *pOrTab;       /* Shortened table list or OR-clause generation */

    int regReturn = ++pParse->nMem;           /* Register used with OP_Gosub */
    int regRowset = 0;                        /* Register for RowSet object */
    int regRowid = 0;                         /* Register holding rowid */
    int iLoopBody = sqlite3VdbeMakeLabel(v);  /* Start of loop body */
    int iRetInit;                             /* Address of regReturn init */
................................................................................
    int ii;
   
    pTerm = pLevel->plan.u.pTerm;
    assert( pTerm!=0 );
    assert( pTerm->eOperator==WO_OR );
    assert( (pTerm->wtFlags & TERM_ORINFO)!=0 );
    pOrWc = &pTerm->u.pOrInfo->wc;
    pFinal = &pOrWc->a[pOrWc->nTerm-1];
    pLevel->op = OP_Return;
    pLevel->p1 = regReturn;

    /* Set up a new SrcList ni pOrTab containing the table being scanned
    ** by this loop in the a[0] slot and all notReady tables in a[1..] slots.
    ** This becomes the SrcList in the recursive call to sqlite3WhereBegin().
    */
................................................................................
  /* Insert code to test every subexpression that can be completely
  ** computed using the current set of tables.
  **
  ** IMPLEMENTATION-OF: R-49525-50935 Terms that cannot be satisfied through
  ** the use of indices become tests that are evaluated against each row of
  ** the relevant input tables.
  */
  k = 0;
  for(pTerm=pWC->a, j=pWC->nTerm; j>0; j--, pTerm++){
    Expr *pE;
    testcase( pTerm->wtFlags & TERM_VIRTUAL ); /* IMP: R-30575-11662 */
    testcase( pTerm->wtFlags & TERM_CODED );
    if( pTerm->wtFlags & (TERM_VIRTUAL|TERM_CODED) ) continue;
    if( (pTerm->prereqAll & notReady)!=0 ){
      testcase( pWInfo->untestedTerms==0
................................................................................
    }
    pE = pTerm->pExpr;
    assert( pE!=0 );
    if( pLevel->iLeftJoin && !ExprHasProperty(pE, EP_FromJoin) ){
      continue;
    }
    sqlite3ExprIfFalse(pParse, pE, addrCont, SQLITE_JUMPIFNULL);
    k = 1;
    pTerm->wtFlags |= TERM_CODED;
  }

  /* For a LEFT OUTER JOIN, generate code that will record the fact that
  ** at least one row of the right table has matched the left table.  
  */
  if( pLevel->iLeftJoin ){
................................................................................
  **   pWInfo->a[].iIdxCur   The VDBE cursor for the index
  **   pWInfo->a[].pTerm     When wsFlags==WO_OR, the OR-clause term
  **
  ** This loop also figures out the nesting order of tables in the FROM
  ** clause.
  */
  notReady = ~(Bitmask)0;
  pTabItem = pTabList->a;
  pLevel = pWInfo->a;
  andFlags = ~0;
  WHERETRACE(("*** Optimizer Start ***\n"));
  for(i=iFrom=0, pLevel=pWInfo->a; i<nTabList; i++, pLevel++){
    WhereCost bestPlan;         /* Most efficient plan seen so far */
    Index *pIdx;                /* Index for FROM table at pTabItem */
    int j;                      /* For looping over FROM tables */
    int bestJ = -1;             /* The value of j */
................................................................................
        }

        /* Conditions under which this table becomes the best so far:
        **
        **   (1) The table must not depend on other tables that have not
        **       yet run.
        **
        **   (2) A full-table-scan plan cannot supercede another plan unless
        **       it is an "optimal" plan as defined above.
        **
        **   (3) All tables have an INDEXED BY clause or this table lacks an
        **       INDEXED BY clause or this table uses the specific
        **       index specified by its INDEXED BY clause.  This rule ensures
        **       that a best-so-far is always selected even if an impossible
        **       combination of INDEXED BY clauses are given.  The error
        **       will be detected and relayed back to the application later.
................................................................................
        **       An indexable full-table-scan from reaching rule (3).
        **
        **   (4) The plan cost must be lower than prior plans or else the
        **       cost must be the same and the number of rows must be lower.
        */
        if( (sCost.used&notReady)==0                       /* (1) */
            && (bestJ<0 || (notIndexed&m)!=0               /* (2) */

                || (sCost.plan.wsFlags & WHERE_NOT_FULLSCAN)!=0)
            && (nUnconstrained==0 || pTabItem->pIndex==0   /* (3) */
                || NEVER((sCost.plan.wsFlags & WHERE_NOT_FULLSCAN)!=0))
            && (bestJ<0 || sCost.rCost<bestPlan.rCost      /* (4) */
                || (sCost.rCost<=bestPlan.rCost 
                 && sCost.plan.nRow<bestPlan.plan.nRow))
        ){

#ifdef SQLITE_ENABLE_STAT2
/*
** Estimate the number of rows that will be returned based on
** an equality constraint x=VALUE and where that VALUE occurs in
** the histogram data.  This only works when x is the left-most
** column of an index and sqlite_stat2 histogram data is available
** for that index.  When pExpr==NULL that means the constraint is
** "x IS NULL" instead of "x=VALUE".
**
** Write the estimated row count into *pnRow and return SQLITE_OK. 
** If unable to make an estimate, leave *pnRow unchanged and return
** non-zero.
**
** This routine can fail if it is unable to load a collating sequence
** required for string comparison, or if unable to allocate memory
................................................................................
  int iLower, iUpper;       /* Range of histogram regions containing pRhs */
  u8 aff;                   /* Column affinity */
  int rc;                   /* Subfunction return code */
  double nRowEst;           /* New estimate of the number of rows */

  assert( p->aSample!=0 );
  aff = p->pTable->aCol[p->aiColumn[0]].affinity;
  if( pExpr ){
    rc = valueFromExpr(pParse, pExpr, aff, &pRhs);
    if( rc ) goto whereEqualScanEst_cancel;
  }else{
    pRhs = sqlite3ValueNew(pParse->db);
  }
  if( pRhs==0 ) return SQLITE_NOTFOUND;
  rc = whereRangeRegion(pParse, p, pRhs, 0, &iLower);
  if( rc ) goto whereEqualScanEst_cancel;
  rc = whereRangeRegion(pParse, p, pRhs, 1, &iUpper);
  if( rc ) goto whereEqualScanEst_cancel;
  WHERETRACE(("equality scan regions: %d..%d\n", iLower, iUpper));
  if( iLower>=iUpper ){
................................................................................
#ifdef SQLITE_ENABLE_STAT2
    /* If the constraint is of the form x=VALUE and histogram
    ** data is available for column x, then it might be possible
    ** to get a better estimate on the number of rows based on
    ** VALUE and how common that value is according to the histogram.
    */
    if( nRow>(double)1 && nEq==1 && pFirstTerm!=0 ){
      if( pFirstTerm->eOperator & (WO_EQ|WO_ISNULL) ){
        testcase( pFirstTerm->eOperator==WO_EQ );
        testcase( pFirstTerm->pOperator==WO_ISNULL );
        whereEqualScanEst(pParse, pProbe, pFirstTerm->pExpr->pRight, &nRow);
      }else if( pFirstTerm->eOperator==WO_IN && bInEst==0 ){
        whereInScanEst(pParse, pProbe, pFirstTerm->pExpr->x.pList, &nRow);
      }
    }
#endif /* SQLITE_ENABLE_STAT2 */

................................................................................
      sqlite3ExprCacheStore(pParse, iCur, -1, iRowidReg);
      sqlite3VdbeAddOp2(v, OP_Seek, iCur, iRowidReg);  /* Deferred seek */
    }

    /* Record the instruction used to terminate the loop. Disable 
    ** WHERE clause terms made redundant by the index range scan.
    */
    if( pLevel->plan.wsFlags & WHERE_UNIQUE ){
      pLevel->op = OP_Noop;
    }else if( bRev ){
      pLevel->op = OP_Prev;
    }else{
      pLevel->op = OP_Next;
    }
    pLevel->p1 = iIdxCur;
  }else

#ifndef SQLITE_OMIT_OR_OPTIMIZATION
  if( pLevel->plan.wsFlags & WHERE_MULTI_OR ){
    /* Case 4:  Two or more separately indexed terms connected by OR
    **
................................................................................
    **
    **          Return     2                # Jump back to the Gosub
    **
    **       B: <after the loop>
    **
    */
    WhereClause *pOrWc;    /* The OR-clause broken out into subterms */

    SrcList *pOrTab;       /* Shortened table list or OR-clause generation */

    int regReturn = ++pParse->nMem;           /* Register used with OP_Gosub */
    int regRowset = 0;                        /* Register for RowSet object */
    int regRowid = 0;                         /* Register holding rowid */
    int iLoopBody = sqlite3VdbeMakeLabel(v);  /* Start of loop body */
    int iRetInit;                             /* Address of regReturn init */
................................................................................
    int ii;
   
    pTerm = pLevel->plan.u.pTerm;
    assert( pTerm!=0 );
    assert( pTerm->eOperator==WO_OR );
    assert( (pTerm->wtFlags & TERM_ORINFO)!=0 );
    pOrWc = &pTerm->u.pOrInfo->wc;

    pLevel->op = OP_Return;
    pLevel->p1 = regReturn;

    /* Set up a new SrcList ni pOrTab containing the table being scanned
    ** by this loop in the a[0] slot and all notReady tables in a[1..] slots.
    ** This becomes the SrcList in the recursive call to sqlite3WhereBegin().
    */
................................................................................
  /* Insert code to test every subexpression that can be completely
  ** computed using the current set of tables.
  **
  ** IMPLEMENTATION-OF: R-49525-50935 Terms that cannot be satisfied through
  ** the use of indices become tests that are evaluated against each row of
  ** the relevant input tables.
  */

  for(pTerm=pWC->a, j=pWC->nTerm; j>0; j--, pTerm++){
    Expr *pE;
    testcase( pTerm->wtFlags & TERM_VIRTUAL ); /* IMP: R-30575-11662 */
    testcase( pTerm->wtFlags & TERM_CODED );
    if( pTerm->wtFlags & (TERM_VIRTUAL|TERM_CODED) ) continue;
    if( (pTerm->prereqAll & notReady)!=0 ){
      testcase( pWInfo->untestedTerms==0
................................................................................
    }
    pE = pTerm->pExpr;
    assert( pE!=0 );
    if( pLevel->iLeftJoin && !ExprHasProperty(pE, EP_FromJoin) ){
      continue;
    }
    sqlite3ExprIfFalse(pParse, pE, addrCont, SQLITE_JUMPIFNULL);

    pTerm->wtFlags |= TERM_CODED;
  }

  /* For a LEFT OUTER JOIN, generate code that will record the fact that
  ** at least one row of the right table has matched the left table.  
  */
  if( pLevel->iLeftJoin ){
................................................................................
  **   pWInfo->a[].iIdxCur   The VDBE cursor for the index
  **   pWInfo->a[].pTerm     When wsFlags==WO_OR, the OR-clause term
  **
  ** This loop also figures out the nesting order of tables in the FROM
  ** clause.
  */
  notReady = ~(Bitmask)0;


  andFlags = ~0;
  WHERETRACE(("*** Optimizer Start ***\n"));
  for(i=iFrom=0, pLevel=pWInfo->a; i<nTabList; i++, pLevel++){
    WhereCost bestPlan;         /* Most efficient plan seen so far */
    Index *pIdx;                /* Index for FROM table at pTabItem */
    int j;                      /* For looping over FROM tables */
    int bestJ = -1;             /* The value of j */
................................................................................
        }

        /* Conditions under which this table becomes the best so far:
        **
        **   (1) The table must not depend on other tables that have not
        **       yet run.
        **
        **   (2) A full-table-scan plan cannot supercede indexed plan unless
        **       the full-table-scan is an "optimal" plan as defined above.
        **
        **   (3) All tables have an INDEXED BY clause or this table lacks an
        **       INDEXED BY clause or this table uses the specific
        **       index specified by its INDEXED BY clause.  This rule ensures
        **       that a best-so-far is always selected even if an impossible
        **       combination of INDEXED BY clauses are given.  The error
        **       will be detected and relayed back to the application later.
................................................................................
        **       An indexable full-table-scan from reaching rule (3).
        **
        **   (4) The plan cost must be lower than prior plans or else the
        **       cost must be the same and the number of rows must be lower.
        */
        if( (sCost.used&notReady)==0                       /* (1) */
            && (bestJ<0 || (notIndexed&m)!=0               /* (2) */
                || (bestPlan.plan.wsFlags & WHERE_NOT_FULLSCAN)==0
                || (sCost.plan.wsFlags & WHERE_NOT_FULLSCAN)!=0)
            && (nUnconstrained==0 || pTabItem->pIndex==0   /* (3) */
                || NEVER((sCost.plan.wsFlags & WHERE_NOT_FULLSCAN)!=0))
            && (bestJ<0 || sCost.rCost<bestPlan.rCost      /* (4) */
                || (sCost.rCost<=bestPlan.rCost 
                 && sCost.plan.nRow<bestPlan.plan.nRow))
        ){

  215  {z IN (-1,3)}         t1z  150
  216  {z=-1 OR z=3}         t1z  150

  300  {y=0}                 {}   100
  301  {y=1}                 t1y   50
  302  {y=0.1}               t1y   50















































} {
  # Verify that the expected index is used with the expected row count
  do_test analyze5-1.${testid}a {
    set x [lindex [eqp "SELECT * FROM t1 WHERE $where"] 3]
    set idx {}
    regexp {INDEX (t1.) } $x all idx
    regexp {~([0-9]+) rows} $x all nrow
................................................................................
      set res ok
    } else {
      set res "a1=\[$a1\] a2=\[$a2\]"
    }
    set res
  } {ok}
}


finish_test

  215  {z IN (-1,3)}         t1z  150
  216  {z=-1 OR z=3}         t1z  150

  300  {y=0}                 {}   100
  301  {y=1}                 t1y   50
  302  {y=0.1}               t1y   50

  400  {x IS NULL}           t1x  400

} {
  # Verify that the expected index is used with the expected row count
  do_test analyze5-1.${testid}a {
    set x [lindex [eqp "SELECT * FROM t1 WHERE $where"] 3]
    set idx {}
    regexp {INDEX (t1.) } $x all idx
    regexp {~([0-9]+) rows} $x all nrow
    list $idx $nrow
  } [list $index $rows]

  # Verify that the same result is achieved regardless of whether or not
  # the index is used
  do_test analyze5-1.${testid}b {
    set w2 [string map {y +y z +z} $where]
    set a1 [db eval "SELECT rowid FROM t1 NOT INDEXED WHERE $w2\
                     ORDER BY +rowid"]
    set a2 [db eval "SELECT rowid FROM t1 WHERE $where ORDER BY +rowid"]
    if {$a1==$a2} {
      set res ok
    } else {
      set res "a1=\[$a1\] a2=\[$a2\]"
    }
    set res
  } {ok}
}

# Increase the number of NULLs in column x
#
db eval {
   UPDATE t1 SET x=NULL;
   UPDATE t1 SET x=rowid
    WHERE rowid IN (SELECT rowid FROM t1 ORDER BY random() LIMIT 5);
   ANALYZE;
}

# Verify that range queries generate the correct row count estimates
#
foreach {testid where index rows} {
  500  {x IS NULL AND u='charlie'}         t1u  20
  501  {x=1 AND u='charlie'}               t1x   5
  502  {x IS NULL}                          {} 100
  503  {x=1}                               t1x  50
  504  {x IS NOT NULL}                     t1x  25

} {
  # Verify that the expected index is used with the expected row count
  do_test analyze5-1.${testid}a {
    set x [lindex [eqp "SELECT * FROM t1 WHERE $where"] 3]
    set idx {}
    regexp {INDEX (t1.) } $x all idx
    regexp {~([0-9]+) rows} $x all nrow
................................................................................
      set res ok
    } else {
      set res "a1=\[$a1\] a2=\[$a2\]"
    }
    set res
  } {ok}
}


finish_test

# 2011 March 3
#
# The author disclaims copyright to this source code.  In place of
# a legal notice, here is a blessing:
#
#    May you do good and not evil.
#    May you find forgiveness for yourself and forgive others.
#    May you share freely, never taking more than you give.
#
#***********************************************************************
#
# This file implements tests for SQLite library.  The focus of the tests
# in this file a corner-case query planner optimization involving the
# join order of two tables of different sizes.
#

set testdir [file dirname $argv0]
source $testdir/tester.tcl

ifcapable !stat2 {
  finish_test
  return
}

set testprefix analyze6

proc eqp {sql {db db}} {
  uplevel execsql [list "EXPLAIN QUERY PLAN $sql"] $db
}

do_test analyze6-1.0 {
  db eval {
    CREATE TABLE cat(x INT);
    CREATE UNIQUE INDEX catx ON cat(x);
    /* Give cat 16 unique integers */
    INSERT INTO cat VALUES(1);
    INSERT INTO cat VALUES(2);
    INSERT INTO cat SELECT x+2 FROM cat;
    INSERT INTO cat SELECT x+4 FROM cat;
    INSERT INTO cat SELECT x+8 FROM cat;

    CREATE TABLE ev(y INT);
    CREATE INDEX evy ON ev(y);
    /* ev will hold 32 copies of 16 integers found in cat */
    INSERT INTO ev SELECT x FROM cat;
    INSERT INTO ev SELECT x FROM cat;
    INSERT INTO ev SELECT y FROM ev;
    INSERT INTO ev SELECT y FROM ev;
    INSERT INTO ev SELECT y FROM ev;
    INSERT INTO ev SELECT y FROM ev;
    ANALYZE;
    SELECT count(*) FROM cat;
    SELECT count(*) FROM ev;
  }
} {16 512}

# The lowest cost plan is to scan CAT and for each integer there, do a single
# lookup of the first corresponding entry in EV then read off the equal values
# in EV.  (Prior to the 2011-03-04 enhancement to where.c, this query would
# have used EV for the outer loop instead of CAT - which was about 3x slower.)
#
do_test analyze6-1.1 {
  eqp {SELECT count(*) FROM ev, cat WHERE x=y}
} {0 0 1 {SCAN TABLE cat (~16 rows)} 0 1 0 {SEARCH TABLE ev USING COVERING INDEX evy (y=?) (~32 rows)}}

# The same plan is chosen regardless of the order of the tables in the
# FROM clause.
#
do_test analyze6-1.2 {
  eqp {SELECT count(*) FROM cat, ev WHERE x=y}
} {0 0 0 {SCAN TABLE cat (~16 rows)} 0 1 1 {SEARCH TABLE ev USING COVERING INDEX evy (y=?) (~32 rows)}}


finish_test

test_expr expr-1.41 {i1=1, i2=2} {-(i2+i1)} {-3}
test_expr expr-1.42 {i1=1, i2=2} {i1|i2} {3}
test_expr expr-1.42b {i1=1, i2=2} {4|2} {6}
test_expr expr-1.43 {i1=1, i2=2} {i1&i2} {0}
test_expr expr-1.43b {i1=1, i2=2} {4&5} {4}
test_expr expr-1.44 {i1=1} {~i1} {-2}
test_expr expr-1.44b {i1=NULL} {~i1} {{}}
test_expr expr-1.45 {i1=1, i2=3} {i1<<i2} {8}






test_expr expr-1.46 {i1=32, i2=3} {i1>>i2} {4}




test_expr expr-1.47 {i1=9999999999, i2=8888888888} {i1<i2} 0
test_expr expr-1.48 {i1=9999999999, i2=8888888888} {i1=i2} 0
test_expr expr-1.49 {i1=9999999999, i2=8888888888} {i1>i2} 1
test_expr expr-1.50 {i1=99999999999, i2=99999999998} {i1<i2} 0
test_expr expr-1.51 {i1=99999999999, i2=99999999998} {i1=i2} 0
test_expr expr-1.52 {i1=99999999999, i2=99999999998} {i1>i2} 1
test_expr expr-1.53 {i1=099999999999, i2=99999999999} {i1<i2} 0
................................................................................
ifcapable floatingpoint {
  test_expr expr-1.103 {i1=0} {(-2147483648.0 % -1)} 0.0
  test_expr expr-1.104 {i1=0} {(-9223372036854775808.0 % -1)} 0.0
  test_expr expr-1.105 {i1=0} {(-9223372036854775808.0 / -1)>1} 1
}

if {[working_64bit_int]} {
  test_expr expr-1.106 {i1=0} {(1<<63)/-1} -9223372036854775808
}

test_expr expr-1.107 {i1=0} {(1<<63)%-1} 0
test_expr expr-1.108 {i1=0} {1%0} {{}}
test_expr expr-1.109 {i1=0} {1/0} {{}}

if {[working_64bit_int]} {
  test_expr expr-1.110 {i1=0} {-9223372036854775807/-1} 9223372036854775807
}

................................................................................
  {CASE WHEN i1 IS NOT i2 THEN 'yes' ELSE 'no' END} yes
test_expr expr-1.124 {i1=NULL, i2=NULL} \
  {CASE WHEN i1 IS NOT i2 THEN 'yes' ELSE 'no' END} no
test_expr expr-1.125 {i1=6, i2=NULL} \
  {CASE WHEN i1 IS NOT i2 THEN 'yes' ELSE 'no' END} yes
test_expr expr-1.126 {i1=8, i2=8} \
  {CASE WHEN i1 IS NOT i2 THEN 'yes' ELSE 'no' END} no






































































































ifcapable floatingpoint {
  test_expr expr-2.1 {r1=1.23, r2=2.34} {r1+r2} 3.57
  test_expr expr-2.2 {r1=1.23, r2=2.34} {r1-r2} -1.11
  test_expr expr-2.3 {r1=1.23, r2=2.34} {r1*r2} 2.8782
}
set tcl_precision 15

test_expr expr-1.41 {i1=1, i2=2} {-(i2+i1)} {-3}
test_expr expr-1.42 {i1=1, i2=2} {i1|i2} {3}
test_expr expr-1.42b {i1=1, i2=2} {4|2} {6}
test_expr expr-1.43 {i1=1, i2=2} {i1&i2} {0}
test_expr expr-1.43b {i1=1, i2=2} {4&5} {4}
test_expr expr-1.44 {i1=1} {~i1} {-2}
test_expr expr-1.44b {i1=NULL} {~i1} {{}}
test_expr expr-1.45a {i1=1, i2=3} {i1<<i2} {8}
test_expr expr-1.45b {i1=1, i2=-3} {i1>>i2} {8}
test_expr expr-1.45c {i1=1, i2=0} {i1<<i2} {1}
test_expr expr-1.45d {i1=1, i2=62} {i1<<i2} {4611686018427387904}
test_expr expr-1.45e {i1=1, i2=63} {i1<<i2} {-9223372036854775808}
test_expr expr-1.45f {i1=1, i2=64} {i1<<i2} {0}
test_expr expr-1.45g {i1=32, i2=-9223372036854775808} {i1>>i2} {0}
test_expr expr-1.46a {i1=32, i2=3} {i1>>i2} {4}
test_expr expr-1.46b {i1=32, i2=6} {i1>>i2} {0}
test_expr expr-1.46c {i1=-32, i2=3} {i1>>i2} {-4}
test_expr expr-1.46d {i1=-32, i2=100} {i1>>i2} {-1}
test_expr expr-1.46e {i1=32, i2=-3} {i1>>i2} {256}
test_expr expr-1.47 {i1=9999999999, i2=8888888888} {i1<i2} 0
test_expr expr-1.48 {i1=9999999999, i2=8888888888} {i1=i2} 0
test_expr expr-1.49 {i1=9999999999, i2=8888888888} {i1>i2} 1
test_expr expr-1.50 {i1=99999999999, i2=99999999998} {i1<i2} 0
test_expr expr-1.51 {i1=99999999999, i2=99999999998} {i1=i2} 0
test_expr expr-1.52 {i1=99999999999, i2=99999999998} {i1>i2} 1
test_expr expr-1.53 {i1=099999999999, i2=99999999999} {i1<i2} 0
................................................................................
ifcapable floatingpoint {
  test_expr expr-1.103 {i1=0} {(-2147483648.0 % -1)} 0.0
  test_expr expr-1.104 {i1=0} {(-9223372036854775808.0 % -1)} 0.0
  test_expr expr-1.105 {i1=0} {(-9223372036854775808.0 / -1)>1} 1
}

if {[working_64bit_int]} {
  test_expr expr-1.106 {i1=0} {-9223372036854775808/-1} 9.22337203685478e+18
}

test_expr expr-1.107 {i1=0} {-9223372036854775808%-1} 0
test_expr expr-1.108 {i1=0} {1%0} {{}}
test_expr expr-1.109 {i1=0} {1/0} {{}}

if {[working_64bit_int]} {
  test_expr expr-1.110 {i1=0} {-9223372036854775807/-1} 9223372036854775807
}

................................................................................
  {CASE WHEN i1 IS NOT i2 THEN 'yes' ELSE 'no' END} yes
test_expr expr-1.124 {i1=NULL, i2=NULL} \
  {CASE WHEN i1 IS NOT i2 THEN 'yes' ELSE 'no' END} no
test_expr expr-1.125 {i1=6, i2=NULL} \
  {CASE WHEN i1 IS NOT i2 THEN 'yes' ELSE 'no' END} yes
test_expr expr-1.126 {i1=8, i2=8} \
  {CASE WHEN i1 IS NOT i2 THEN 'yes' ELSE 'no' END} no

ifcapable floatingpoint {if {[working_64bit_int]} {
  test_expr expr-1.200\
      {i1=9223372036854775806, i2=1} {i1+i2}      9223372036854775807
  test_expr expr-1.201\
      {i1=9223372036854775806, i2=2} {i1+i2}      9.22337203685478e+18
  test_expr expr-1.202\
      {i1=9223372036854775806, i2=100000} {i1+i2} 9.22337203685488e+18
  test_expr expr-1.203\
      {i1=9223372036854775807, i2=0} {i1+i2}      9223372036854775807
  test_expr expr-1.204\
      {i1=9223372036854775807, i2=1} {i1+i2}      9.22337203685478e+18
  test_expr expr-1.205\
      {i2=9223372036854775806, i1=1} {i1+i2}      9223372036854775807
  test_expr expr-1.206\
      {i2=9223372036854775806, i1=2} {i1+i2}      9.22337203685478e+18
  test_expr expr-1.207\
      {i2=9223372036854775806, i1=100000} {i1+i2} 9.22337203685488e+18
  test_expr expr-1.208\
      {i2=9223372036854775807, i1=0} {i1+i2}      9223372036854775807
  test_expr expr-1.209\
      {i2=9223372036854775807, i1=1} {i1+i2}      9.22337203685478e+18
  test_expr expr-1.210\
      {i1=-9223372036854775807, i2=-1} {i1+i2}    -9223372036854775808
  test_expr expr-1.211\
      {i1=-9223372036854775807, i2=-2} {i1+i2}    -9.22337203685478e+18
  test_expr expr-1.212\
      {i1=-9223372036854775807, i2=-100000} {i1+i2} -9.22337203685488e+18
  test_expr expr-1.213\
      {i1=-9223372036854775808, i2=0} {i1+i2}     -9223372036854775808
  test_expr expr-1.214\
      {i1=-9223372036854775808, i2=-1} {i1+i2}    -9.22337203685478e+18
  test_expr expr-1.215\
      {i2=-9223372036854775807, i1=-1} {i1+i2}    -9223372036854775808
  test_expr expr-1.216\
      {i2=-9223372036854775807, i1=-2} {i1+i2}    -9.22337203685478e+18
  test_expr expr-1.217\
      {i2=-9223372036854775807, i1=-100000} {i1+i2} -9.22337203685488e+18
  test_expr expr-1.218\
      {i2=-9223372036854775808, i1=0} {i1+i2}     -9223372036854775808
  test_expr expr-1.219\
      {i2=-9223372036854775808, i1=-1} {i1+i2}    -9.22337203685478e+18
  test_expr expr-1.220\
      {i1=9223372036854775806, i2=-1} {i1-i2}     9223372036854775807
  test_expr expr-1.221\
      {i1=9223372036854775806, i2=-2} {i1-i2}      9.22337203685478e+18
  test_expr expr-1.222\
      {i1=9223372036854775806, i2=-100000} {i1-i2} 9.22337203685488e+18
  test_expr expr-1.223\
      {i1=9223372036854775807, i2=0} {i1-i2}      9223372036854775807
  test_expr expr-1.224\
      {i1=9223372036854775807, i2=-1} {i1-i2}      9.22337203685478e+18
  test_expr expr-1.225\
      {i2=-9223372036854775806, i1=1} {i1-i2}      9223372036854775807
  test_expr expr-1.226\
      {i2=-9223372036854775806, i1=2} {i1-i2}      9.22337203685478e+18
  test_expr expr-1.227\
      {i2=-9223372036854775806, i1=100000} {i1-i2} 9.22337203685488e+18
  test_expr expr-1.228\
      {i2=-9223372036854775807, i1=0} {i1-i2}      9223372036854775807
  test_expr expr-1.229\
      {i2=-9223372036854775807, i1=1} {i1-i2}      9.22337203685478e+18
  test_expr expr-1.230\
      {i1=-9223372036854775807, i2=1} {i1-i2}    -9223372036854775808
  test_expr expr-1.231\
      {i1=-9223372036854775807, i2=2} {i1-i2}    -9.22337203685478e+18
  test_expr expr-1.232\
      {i1=-9223372036854775807, i2=100000} {i1-i2} -9.22337203685488e+18
  test_expr expr-1.233\
      {i1=-9223372036854775808, i2=0} {i1-i2}     -9223372036854775808
  test_expr expr-1.234\
      {i1=-9223372036854775808, i2=1} {i1-i2}    -9.22337203685478e+18
  test_expr expr-1.235\
      {i2=9223372036854775807, i1=-1} {i1-i2}    -9223372036854775808
  test_expr expr-1.236\
      {i2=9223372036854775807, i1=-2} {i1-i2}    -9.22337203685478e+18
  test_expr expr-1.237\
      {i2=9223372036854775807, i1=-100000} {i1-i2} -9.22337203685488e+18
  test_expr expr-1.238\
      {i2=9223372036854775807, i1=0} {i1-i2}     -9223372036854775807
  test_expr expr-1.239\
      {i2=9223372036854775807, i1=-1} {i1-i2}    -9223372036854775808

  test_expr expr-1.250\
      {i1=4294967296, i2=2147483648} {i1*i2}      9.22337203685478e+18
  test_expr expr-1.251\
      {i1=4294967296, i2=2147483647} {i1*i2}      9223372032559808512
  test_expr expr-1.252\
      {i1=-4294967296, i2=2147483648} {i1*i2}     -9223372036854775808
  test_expr expr-1.253\
      {i1=-4294967296, i2=2147483647} {i1*i2}     -9223372032559808512
  test_expr expr-1.254\
      {i1=4294967296, i2=-2147483648} {i1*i2}     -9223372036854775808
  test_expr expr-1.255\
      {i1=4294967296, i2=-2147483647} {i1*i2}     -9223372032559808512
  test_expr expr-1.256\
      {i1=-4294967296, i2=-2147483648} {i1*i2}    9.22337203685478e+18
  test_expr expr-1.257\
      {i1=-4294967296, i2=-2147483647} {i1*i2}    9223372032559808512

}}

ifcapable floatingpoint {
  test_expr expr-2.1 {r1=1.23, r2=2.34} {r1+r2} 3.57
  test_expr expr-2.2 {r1=1.23, r2=2.34} {r1-r2} -1.11
  test_expr expr-2.3 {r1=1.23, r2=2.34} {r1*r2} 2.8782
}
set tcl_precision 15

    );
  }
  for {set i 1} {$i<=50} {incr i} {
    execsql "INSERT INTO t3 VALUES('x${i}x',$i,0.$i)"
  }
  set sqlite_search_count 0
  concat [execsql {SELECT c FROM t3 WHERE b==10}] $sqlite_search_count
} {0.1 3}
integrity_check index-11.2


# Numeric strings should compare as if they were numbers.  So even if the
# strings are not character-by-character the same, if they represent the
# same number they should compare equal to one another.  Verify that this
# is true in indices.

    );
  }
  for {set i 1} {$i<=50} {incr i} {
    execsql "INSERT INTO t3 VALUES('x${i}x',$i,0.$i)"
  }
  set sqlite_search_count 0
  concat [execsql {SELECT c FROM t3 WHERE b==10}] $sqlite_search_count
} {0.1 2}
integrity_check index-11.2


# Numeric strings should compare as if they were numbers.  So even if the
# strings are not character-by-character the same, if they represent the
# same number they should compare equal to one another.  Verify that this
# is true in indices.

# 2011 March 9
#
# The author disclaims copyright to this source code.  In place of
# a legal notice, here is a blessing:
#
#    May you do good and not evil.
#    May you find forgiveness for yourself and forgive others.
#    May you share freely, never taking more than you give.
#
#***********************************************************************
#
# This file contains tests of the mem5 allocation subsystem.
#

set testdir [file dirname $argv0]
source $testdir/tester.tcl

ifcapable !mem5 {
  finish_test
  return
}

# The tests in this file configure the lookaside allocator after a 
# connection is opened. This will not work if there is any "presql"
# configured (SQL run within the [sqlite3] wrapper in tester.tcl).
if {[info exists ::G(perm:presql)]} {
  finish_test
  return
}

do_test mem5-1.1 {
  catch {db close}
  sqlite3_shutdown
  sqlite3_config_heap 25000000 0
  sqlite3_config_lookaside 0 0
  sqlite3_initialize
} {SQLITE_OK}

# try with min request size = 2^30
do_test mem5-1.2 {
  catch {db close}
  sqlite3_shutdown
  sqlite3_config_heap 1 1073741824
  sqlite3_config_lookaside 0 0
  sqlite3_initialize
} {SQLITE_NOMEM}

# try with min request size = 2^30+1
# previously this was causing the memsys5Log() func to infinitely loop.
do_test mem5-1.3 {
  catch {db close}
  sqlite3_shutdown
  sqlite3_config_heap 1 1073741825
  sqlite3_config_lookaside 0 0
  sqlite3_initialize
} {SQLITE_NOMEM}

do_test mem5-1.4 {
  catch {db close}
  sqlite3_shutdown
  sqlite3_config_heap 0 0
  sqlite3_config_lookaside 0 0
  sqlite3_initialize
} {SQLITE_OK}

finish_test

# 2011 March 10
#
# The author disclaims copyright to this source code.  In place of
# a legal notice, here is a blessing:
#
#    May you do good and not evil.
#    May you find forgiveness for yourself and forgive others.
#    May you share freely, never taking more than you give.
#
#***********************************************************************
# This file implements regression tests for SQLite library.  The
# focus of this file is testing the SQLITE_OMIT_UNIQUE_ENFORCEMENT
# compiler option.
#

set testdir [file dirname $argv0]
source $testdir/tester.tcl

set uniq_enforced 1
ifcapable !unique_enforcement {
  set uniq_enforced 0
}

# table with UNIQUE keyword on column
do_test omitunique-1.1 {
  catchsql { CREATE TABLE t1(a TEXT UNIQUE); }
} {0 {}}

# table with UNIQUE clause on column
do_test omitunique-1.2 {
  catchsql { CREATE TABLE t2(a TEXT, UNIQUE(a)); }
} {0 {}}

# table with UNIQUE index on column
do_test omitunique-1.3 {
  catchsql {
    CREATE TABLE t3(a TEXT);
    CREATE UNIQUE INDEX t3a ON t3(a);
  }
} {0 {}}

# table with regular index on column
do_test omitunique-1.4 {
  catchsql {
    CREATE TABLE t4(a TEXT);
    CREATE INDEX t4a ON t4(a);
  }
} {0 {}}

# table with no index on column
do_test omitunique-1.5 {
  catchsql { CREATE TABLE t5(a TEXT); }
} {0 {}}

# run our tests using several table/index forms
foreach {j tbl uniq cnt qp_est stat_enforce stat_omit } {
1 {t1} 1 1 1      {2 1} {9 9}
2 {t2} 1 1 1      {2 1} {9 9}
3 {t3} 1 1 1      {2 1} {9 9}
4 {t4} 0 9 10     {9 9} {9 9}
5 {t5} 0 9 100000 9     9
} {

  do_test omitunique-2.0.$j.1 {
    catchsql [ subst {INSERT INTO $tbl (a) VALUES('abc'); }]
  } {0 {}}
  do_test omitunique-2.0.$j.2 {
    catchsql [ subst {INSERT INTO $tbl (a) VALUES('123'); }]
  } {0 {}}

  # check various INSERT commands
  foreach {i cmd err} {
    1 {INSERT}             1   
    2 {INSERT OR IGNORE}   0 
    3 {INSERT OR REPLACE}  0
    4 {REPLACE}            0
    5 {INSERT OR FAIL}     1
    6 {INSERT OR ABORT}    1
    7 {INSERT OR ROLLBACK} 1
  } {

    ifcapable explain {
      set x [execsql [ subst { EXPLAIN $cmd INTO $tbl (a) VALUES('abc'); }]]
      ifcapable unique_enforcement {
          do_test omitunique-2.1.$j.$i.1 {
            regexp { IsUnique } $x
          } $uniq
      }
      ifcapable !unique_enforcement {
          do_test omitunique-2.1.$j.$i.1 {
            regexp { IsUnique } $x
          } {0}
      }
    }

    if { $uniq_enforced==0 || $uniq==0 || $err==0 } { 
      set msg {0 {}}
    } {
      set msg {1 {column a is not unique}}
    }
    do_test omitunique-2.1.$j.$i.3 {
      catchsql [ subst {$cmd INTO $tbl (a) VALUES('abc'); }]
    } $msg

  }
  # end foreach cmd

  # check UPDATE command
  ifcapable explain {
    set x [execsql [ subst { EXPLAIN UPDATE $tbl SET a='abc'; }]]
    ifcapable unique_enforcement {
        do_test omitunique-2.2.$j.1 {
          regexp { IsUnique } $x
        } $uniq
    }
    ifcapable !unique_enforcement {
        do_test omitunique-2.2.$j.1 {
          regexp { IsUnique } $x
        } {0}
    }
  }
  if { $uniq_enforced==0 || $uniq==0 } { 
    set msg {0 {}}
  } {
    set msg {1 {column a is not unique}}
  }
  do_test omitunique-2.2.$j.3 {
    catchsql [ subst { UPDATE $tbl SET a='abc'; }]
  } $msg

  # check record counts
  do_test omitunique-2.3.$j {
    execsql [ subst { SELECT count(*) FROM $tbl WHERE a='abc'; }]
  } $cnt

  # make sure the query planner row estimate not affected because of omit enforcement
  ifcapable explain {
    do_test omitunique-2.4.$j {
      set x [ execsql [ subst { EXPLAIN QUERY PLAN SELECT count(*) FROM $tbl WHERE a='abc'; }]]
      set y [ subst {~$qp_est row} ]
      regexp $y $x
    } {1}
  }

  # make sure we omit extra OP_Next opcodes when the UNIQUE constraints 
  # mean there will only be a single pass through the code 
  ifcapable explain {
    set x [execsql [ subst { EXPLAIN SELECT * FROM $tbl WHERE a='abc'; }]]
    do_test omitunique-2.5.$j {
      if { [ regexp { Next } $x ] } { expr { 0 } } { expr { 1 } }
    } $uniq
  }

  # make sure analyze index stats correct
  ifcapable analyze {
    if { $uniq_enforced==0 } { 
      set msg [ list $stat_omit ]
    } {
      set msg [ list $stat_enforce ]
    }
    do_test omitunique-2.6.$j {
      execsql [ subst { ANALYZE $tbl; } ]
      execsql [ subst { SELECT stat FROM sqlite_stat1 WHERE tbl='$tbl'; } ]
    } $msg
  }

}
# end foreach tbl

finish_test

    for {set i 0} {$i < 2000} {incr i} { sqlite3 dbh_$i test.db -readonly 1 }
  } msg] $msg
} {1 {unable to open database file}}
do_test 1.1.2 {
  catch { for {set i 0} {$i < 2000} {incr i} { dbh_$i close } }
} {1}

do_re_test 1.1.3 { lindex $::log 0 } {^os_unix.c: open.*test.db$}


# Test a failure in open() due to the path being a directory.
#
do_test 1.2.1 {
  file mkdir dir.db
  set ::log [list]
  list [catch { sqlite3 dbh dir.db } msg] $msg
} {1 {unable to open database file}}

do_re_test 1.2.2 { lindex $::log 0 } {^os_unix.c: open.*dir.db$}

# Test a failure in open() due to the path not existing.
#
do_test 1.3.1 {
  set ::log [list]
  list [catch { sqlite3 dbh /x/y/z/test.db } msg] $msg
} {1 {unable to open database file}}

do_re_test 1.3.2 { lindex $::log 0 } {^os_unix.c: open.*test.db$}

# Test a failure in open() due to the path not existing.
#
do_test 1.4.1 {
  set ::log [list]
  list [catch { sqlite3 dbh /root/test.db } msg] $msg
} {1 {unable to open database file}}

do_re_test 1.4.2 { lindex $::log 0 } {^os_unix.c: open.*test.db$}

#--------------------------------------------------------------------------
# Tests oserror-1.* test failures in the unlink() system call.
#
do_test 2.1.1 {
  set ::log [list]
  file mkdir test.db-wal
  forcedelete test.db
  sqlite3 dbh test.db
  catchsql { SELECT * FROM sqlite_master } dbh
} {1 {disk I/O error}}

do_re_test 2.1.2 { lindex $::log 0 } {^os_unix.c: unlink.*test.db-wal$}
do_test 2.1.3 { 
  dbh close
  forcedelete test.db-wal
} {}
  

sqlite3_shutdown
test_sqlite3_log 
sqlite3_initialize
finish_test
  

    for {set i 0} {$i < 2000} {incr i} { sqlite3 dbh_$i test.db -readonly 1 }
  } msg] $msg
} {1 {unable to open database file}}
do_test 1.1.2 {
  catch { for {set i 0} {$i < 2000} {incr i} { dbh_$i close } }
} {1}

do_re_test 1.1.3 { lindex $::log 0 } {^os_unix.c:\d+: \(\d+\) open\(.*test.db\) - }


# Test a failure in open() due to the path being a directory.
#
do_test 1.2.1 {
  file mkdir dir.db
  set ::log [list]
  list [catch { sqlite3 dbh dir.db } msg] $msg
} {1 {unable to open database file}}

do_re_test 1.2.2 { lindex $::log 0 } {^os_unix.c:\d+: \(\d+\) open\(.*dir.db\) - }

# Test a failure in open() due to the path not existing.
#
do_test 1.3.1 {
  set ::log [list]
  list [catch { sqlite3 dbh /x/y/z/test.db } msg] $msg
} {1 {unable to open database file}}

do_re_test 1.3.2 { lindex $::log 0 } {^os_unix.c:\d+: \(\d+\) open\(.*test.db\) - }

# Test a failure in open() due to the path not existing.
#
do_test 1.4.1 {
  set ::log [list]
  list [catch { sqlite3 dbh /root/test.db } msg] $msg
} {1 {unable to open database file}}

do_re_test 1.4.2 { lindex $::log 0 } {^os_unix.c:\d*: \(\d+\) open\(.*test.db\) - }

#--------------------------------------------------------------------------
# Tests oserror-1.* test failures in the unlink() system call.
#
do_test 2.1.1 {
  set ::log [list]
  file mkdir test.db-wal
  forcedelete test.db
  sqlite3 dbh test.db
  catchsql { SELECT * FROM sqlite_master } dbh
} {1 {disk I/O error}}

do_re_test 2.1.2 { lindex $::log 0 } {^os_unix.c:\d+: \(\d+\) unlink\(.*test.db-wal\) - }
do_test 2.1.3 { 
  dbh close
  forcedelete test.db-wal
} {}
  

sqlite3_shutdown
test_sqlite3_log 
sqlite3_initialize
finish_test

    SQLITE_OMIT_SHARED_CACHE \
    SQLITE_OMIT_SUBQUERY \
    SQLITE_OMIT_TCL_VARIABLE \
    SQLITE_OMIT_TEMPDB \
    SQLITE_OMIT_TRACE \
    SQLITE_OMIT_TRIGGER \
    SQLITE_OMIT_TRUNCATE_OPTIMIZATION \

    SQLITE_OMIT_UTF16 \
    SQLITE_OMIT_VACUUM \
    SQLITE_OMIT_VIEW \
    SQLITE_OMIT_VIRTUALTABLE \
    SQLITE_OMIT_WAL \
    SQLITE_OMIT_WSD \
    SQLITE_OMIT_XFER_OPT \

    SQLITE_OMIT_SHARED_CACHE \
    SQLITE_OMIT_SUBQUERY \
    SQLITE_OMIT_TCL_VARIABLE \
    SQLITE_OMIT_TEMPDB \
    SQLITE_OMIT_TRACE \
    SQLITE_OMIT_TRIGGER \
    SQLITE_OMIT_TRUNCATE_OPTIMIZATION \
    SQLITE_OMIT_UNIQUE_ENFORCEMENT \
    SQLITE_OMIT_UTF16 \
    SQLITE_OMIT_VACUUM \
    SQLITE_OMIT_VIEW \
    SQLITE_OMIT_VIRTUALTABLE \
    SQLITE_OMIT_WAL \
    SQLITE_OMIT_WSD \
    SQLITE_OMIT_XFER_OPT \