SQLite

  if( pCur->pFullScan ){
    *pRowid = sqlite3_column_int64(pCur->pFullScan, 4);
  }else{
    *pRowid = pCur->a[pCur->iRow].iRowid;
  }
  return SQLITE_OK;
}

/*
** This function is called by the xUpdate() method. It returns a string
** containing the conflict mode that xUpdate() should use for the current
** operation. One of: "ROLLBACK", "IGNORE", "ABORT" or "REPLACE".
*/
static const char *spellfix1GetConflict(sqlite3 *db){
  static const char *azConflict[] = {
    /* Note: Instead of "FAIL" - "ABORT". */
    "ROLLBACK", "IGNORE", "ABORT", "ABORT", "REPLACE"
  };
  int eConflict = sqlite3_vtab_on_conflict(db);

  assert( eConflict==SQLITE_ROLLBACK || eConflict==SQLITE_IGNORE
       || eConflict==SQLITE_FAIL || eConflict==SQLITE_ABORT
       || eConflict==SQLITE_REPLACE
  );
  assert( SQLITE_ROLLBACK==1 );
  assert( SQLITE_IGNORE==2 );
  assert( SQLITE_FAIL==3 );
  assert( SQLITE_ABORT==4 );
  assert( SQLITE_REPLACE==5 );

  return azConflict[eConflict-1];
}

/*
** The xUpdate() method.
*/
static int spellfix1Update(
  sqlite3_vtab *pVTab,
  int argc,

    int iRank = sqlite3_value_int(argv[SPELLFIX_COL_RANK+2]);
    const unsigned char *zSoundslike =
           sqlite3_value_text(argv[SPELLFIX_COL_SOUNDSLIKE+2]);
    int nSoundslike = sqlite3_value_bytes(argv[SPELLFIX_COL_SOUNDSLIKE+2]);
    char *zK1, *zK2;
    int i;
    char c;
    const char *zConflict = spellfix1GetConflict(db);

    if( zWord==0 ){
      /* Inserts of the form:  INSERT INTO table(command) VALUES('xyzzy');
      ** cause zWord to be NULL, so we look at the "command" column to see
      ** what special actions to take */
      const char *zCmd = 
         (const char*)sqlite3_value_text(argv[SPELLFIX_COL_COMMAND+2]);

               "VALUES(%d,%d,%Q,%Q,%Q)",
               p->zDbName, p->zTableName,
               iRank, iLang, zWord, zK1, zK2
        );
      }else{
        newRowid = sqlite3_value_int64(argv[1]);
        spellfix1DbExec(&rc, db,
            "INSERT OR %s INTO \"%w\".\"%w_vocab\"(id,rank,langid,word,k1,k2) "
            "VALUES(%lld,%d,%d,%Q,%Q,%Q)",
            zConflict, p->zDbName, p->zTableName,
            newRowid, iRank, iLang, zWord, zK1, zK2
        );
      }
      *pRowid = sqlite3_last_insert_rowid(db);
    }else{
      rowid = sqlite3_value_int64(argv[0]);
      newRowid = *pRowid = sqlite3_value_int64(argv[1]);
      spellfix1DbExec(&rc, db,
             "UPDATE OR %s \"%w\".\"%w_vocab\" SET id=%lld, rank=%d, langid=%d,"
             " word=%Q, k1=%Q, k2=%Q WHERE id=%lld",
             zConflict, p->zDbName, p->zTableName, newRowid, iRank, iLang,
             zWord, zK1, zK2, rowid
      );
    }
    sqlite3_free(zK1);
    sqlite3_free(zK2);
  }
  return rc;

*/
static void invalidateIncrblobCursors(
  Btree *pBtree,          /* The database file to check */
  i64 iRow,               /* The rowid that might be changing */
  int isClearTable        /* True if all rows are being deleted */
){
  BtCursor *p;
  if( pBtree->hasIncrblobCur==0 ) return;
  assert( sqlite3BtreeHoldsMutex(pBtree) );
  pBtree->hasIncrblobCur = 0;
  for(p=pBtree->pBt->pCursor; p; p=p->pNext){
    if( (p->curFlags & BTCF_Incrblob)!=0 ){
      pBtree->hasIncrblobCur = 1;
      if( isClearTable || p->info.nKey==iRow ){

        p->eState = CURSOR_INVALID;
      }
    }
  }
}

#else
  /* Stub function when INCRBLOB is omitted */
  #define invalidateIncrblobCursors(x,y,z)

** the page, 1 means the second cell, and so forth) return a pointer
** to the cell content.
**
** This routine works only for pages that do not contain overflow cells.
*/
#define findCell(P,I) \
  ((P)->aData + ((P)->maskPage & get2byte(&(P)->aCellIdx[2*(I)])))

/*
** This is common tail processing for btreeParseCellPtr() and
** btreeParseCellPtrIndex() for the case when the cell does not fit entirely
** on a single B-tree page.  Make necessary adjustments to the CellInfo
** structure.
*/
static SQLITE_NOINLINE void btreeParseCellAdjustSizeForOverflow(
  MemPage *pPage,         /* Page containing the cell */
  u8 *pCell,              /* Pointer to the cell text. */
  CellInfo *pInfo         /* Fill in this structure */
){
  /* If the payload will not fit completely on the local page, we have
  ** to decide how much to store locally and how much to spill onto
  ** overflow pages.  The strategy is to minimize the amount of unused
  ** space on overflow pages while keeping the amount of local storage
  ** in between minLocal and maxLocal.
  **
  ** Warning:  changing the way overflow payload is distributed in any
  ** way will result in an incompatible file format.
  */
  int minLocal;  /* Minimum amount of payload held locally */
  int maxLocal;  /* Maximum amount of payload held locally */
  int surplus;   /* Overflow payload available for local storage */

  minLocal = pPage->minLocal;
  maxLocal = pPage->maxLocal;
  surplus = minLocal + (pInfo->nPayload - minLocal)%(pPage->pBt->usableSize-4);
  testcase( surplus==maxLocal );
  testcase( surplus==maxLocal+1 );
  if( surplus <= maxLocal ){
    pInfo->nLocal = (u16)surplus;
  }else{
    pInfo->nLocal = (u16)minLocal;
  }
  pInfo->iOverflow = (u16)(&pInfo->pPayload[pInfo->nLocal] - pCell);
  pInfo->nSize = pInfo->iOverflow + 4;
}

/*
** The following routines are implementations of the MemPage.xParseCell()
** method.
**
** Parse a cell content block and fill in the CellInfo structure.
**
** btreeParseCellPtr()        =>   table btree leaf nodes
** btreeParseCellNoPayload()  =>   table btree internal nodes
** btreeParseCellPtrIndex()   =>   index btree nodes
**
** There is also a wrapper function btreeParseCell() that works for
** all MemPage types and that references the cell by index rather than
** by pointer.
*/
static void btreeParseCellPtrNoPayload(
  MemPage *pPage,         /* Page containing the cell */
  u8 *pCell,              /* Pointer to the cell text. */
  CellInfo *pInfo         /* Fill in this structure */
){
  assert( sqlite3_mutex_held(pPage->pBt->mutex) );
  assert( pPage->leaf==0 );

  assert( pPage->noPayload );


  assert( pPage->childPtrSize==4 );

  pInfo->nSize = 4 + getVarint(&pCell[4], (u64*)&pInfo->nKey);


  pInfo->nPayload = 0;
  pInfo->nLocal = 0;
  pInfo->iOverflow = 0;
  pInfo->pPayload = 0;
  return;
}







static void btreeParseCellPtr(
  MemPage *pPage,         /* Page containing the cell */
  u8 *pCell,              /* Pointer to the cell text. */
  CellInfo *pInfo         /* Fill in this structure */
){
  u8 *pIter;              /* For scanning through pCell */
  u32 nPayload;           /* Number of bytes of cell payload */
  u64 iKey;               /* Extracted Key value */

  assert( sqlite3_mutex_held(pPage->pBt->mutex) );
  assert( pPage->leaf==0 || pPage->leaf==1 );
  assert( pPage->intKeyLeaf || pPage->noPayload );
  assert( pPage->noPayload==0 );
  assert( pPage->intKeyLeaf );
  assert( pPage->childPtrSize==0 );
  pIter = pCell;

  /* The next block of code is equivalent to:
  **
  **     pIter += getVarint32(pIter, nPayload);
  **
  ** The code is inlined to avoid a function call.
  */
  nPayload = *pIter;
  if( nPayload>=0x80 ){
    u8 *pEnd = &pIter[8];
    nPayload &= 0x7f;
    do{
      nPayload = (nPayload<<7) | (*++pIter & 0x7f);
    }while( (*pIter)>=0x80 && pIter<pEnd );
  }
  pIter++;

  /* The next block of code is equivalent to:
  **
  **     pIter += getVarint(pIter, (u64*)&pInfo->nKey);
  **
  ** The code is inlined to avoid a function call.
  */
  iKey = *pIter;
  if( iKey>=0x80 ){
    u8 *pEnd = &pIter[7];
    iKey &= 0x7f;
    while(1){
      iKey = (iKey<<7) | (*++pIter & 0x7f);
      if( (*pIter)<0x80 ) break;
      if( pIter>=pEnd ){
        iKey = (iKey<<8) | *++pIter;
        break;
      }
    }
  }
  pIter++;

  pInfo->nKey = *(i64*)&iKey;
  pInfo->nPayload = nPayload;
  pInfo->pPayload = pIter;
  testcase( nPayload==pPage->maxLocal );
  testcase( nPayload==pPage->maxLocal+1 );
  if( nPayload<=pPage->maxLocal ){
    /* This is the (easy) common case where the entire payload fits
    ** on the local page.  No overflow is required.
    */
    pInfo->nSize = nPayload + (u16)(pIter - pCell);
    if( pInfo->nSize<4 ) pInfo->nSize = 4;
    pInfo->nLocal = (u16)nPayload;
    pInfo->iOverflow = 0;
  }else{
    btreeParseCellAdjustSizeForOverflow(pPage, pCell, pInfo);
  }
}
static void btreeParseCellPtrIndex(
  MemPage *pPage,         /* Page containing the cell */
  u8 *pCell,              /* Pointer to the cell text. */
  CellInfo *pInfo         /* Fill in this structure */
){
  u8 *pIter;              /* For scanning through pCell */
  u32 nPayload;           /* Number of bytes of cell payload */

  assert( sqlite3_mutex_held(pPage->pBt->mutex) );
  assert( pPage->leaf==0 || pPage->leaf==1 );
  assert( pPage->intKeyLeaf==0 );



  assert( pPage->noPayload==0 );
  pIter = pCell + pPage->childPtrSize;

  nPayload = *pIter;


  if( nPayload>=0x80 ){


    u8 *pEnd = &pIter[8];
    nPayload &= 0x7f;
    do{
      nPayload = (nPayload<<7) | (*++pIter & 0x7f);
    }while( *(pIter)>=0x80 && pIter<pEnd );
  }
  pIter++;
  pInfo->nKey = nPayload;
  pInfo->nPayload = nPayload;
  pInfo->pPayload = pIter;
  testcase( nPayload==pPage->maxLocal );
  testcase( nPayload==pPage->maxLocal+1 );
  if( nPayload<=pPage->maxLocal ){
    /* This is the (easy) common case where the entire payload fits
    ** on the local page.  No overflow is required.
    */
    pInfo->nSize = nPayload + (u16)(pIter - pCell);
    if( pInfo->nSize<4 ) pInfo->nSize = 4;
    pInfo->nLocal = (u16)nPayload;
    pInfo->iOverflow = 0;
  }else{












    btreeParseCellAdjustSizeForOverflow(pPage, pCell, pInfo);












  }
}
static void btreeParseCell(
  MemPage *pPage,         /* Page containing the cell */
  int iCell,              /* The cell index.  First cell is 0 */
  CellInfo *pInfo         /* Fill in this structure */
){
  pPage->xParseCell(pPage, findCell(pPage, iCell), pInfo);
}

/*
** The following routines are implementations of the MemPage.xCellSize
** method.
**
** Compute the total number of bytes that a Cell needs in the cell
** data area of the btree-page.  The return number includes the cell
** data header and the local payload, but not any overflow page or
** the space used by the cell pointer.
**
** cellSizePtrNoPayload()    =>   table internal nodes
** cellSizePtr()             =>   all index nodes & table leaf nodes
*/
static u16 cellSizePtr(MemPage *pPage, u8 *pCell){
  u8 *pIter = pCell + pPage->childPtrSize; /* For looping over bytes of pCell */
  u8 *pEnd;                                /* End mark for a varint */
  u32 nSize;                               /* Size value to return */

#ifdef SQLITE_DEBUG
  /* The value returned by this function should always be the same as
  ** the (CellInfo.nSize) value found by doing a full parse of the
  ** cell. If SQLITE_DEBUG is defined, an assert() at the bottom of
  ** this function verifies that this invariant is not violated. */
  CellInfo debuginfo;
  pPage->xParseCell(pPage, pCell, &debuginfo);
#endif

  assert( pPage->noPayload==0 );





  nSize = *pIter;
  if( nSize>=0x80 ){
    pEnd = &pIter[8];
    nSize &= 0x7f;
    do{
      nSize = (nSize<<7) | (*++pIter & 0x7f);
    }while( *(pIter)>=0x80 && pIter<pEnd );
  }
  pIter++;
  if( pPage->intKey ){

      nSize = minLocal;
    }
    nSize += 4 + (u16)(pIter - pCell);
  }
  assert( nSize==debuginfo.nSize || CORRUPT_DB );
  return (u16)nSize;
}
static u16 cellSizePtrNoPayload(MemPage *pPage, u8 *pCell){
  u8 *pIter = pCell + 4; /* For looping over bytes of pCell */
  u8 *pEnd;              /* End mark for a varint */

#ifdef SQLITE_DEBUG
  /* The value returned by this function should always be the same as
  ** the (CellInfo.nSize) value found by doing a full parse of the
  ** cell. If SQLITE_DEBUG is defined, an assert() at the bottom of
  ** this function verifies that this invariant is not violated. */
  CellInfo debuginfo;
  pPage->xParseCell(pPage, pCell, &debuginfo);
#endif

  assert( pPage->childPtrSize==4 );
  pEnd = pIter + 9;
  while( (*pIter++)&0x80 && pIter<pEnd );
  assert( debuginfo.nSize==(u16)(pIter - pCell) || CORRUPT_DB );
  return (u16)(pIter - pCell);
}


#ifdef SQLITE_DEBUG
/* This variation on cellSizePtr() is used inside of assert() statements
** only. */
static u16 cellSize(MemPage *pPage, int iCell){
  return pPage->xCellSize(pPage, findCell(pPage, iCell));
}
#endif

#ifndef SQLITE_OMIT_AUTOVACUUM
/*
** If the cell pCell, part of page pPage contains a pointer
** to an overflow page, insert an entry into the pointer-map
** for the overflow page.
*/
static void ptrmapPutOvflPtr(MemPage *pPage, u8 *pCell, int *pRC){
  CellInfo info;
  if( *pRC ) return;
  assert( pCell!=0 );
  pPage->xParseCell(pPage, pCell, &info);
  if( info.iOverflow ){
    Pgno ovfl = get4byte(&pCell[info.iOverflow]);
    ptrmapPut(pPage->pBt, ovfl, PTRMAP_OVERFLOW1, pPage->pgno, pRC);
  }
}
#endif

    /* These conditions have already been verified in btreeInitPage()
    ** if PRAGMA cell_size_check=ON.
    */
    if( pc<iCellFirst || pc>iCellLast ){
      return SQLITE_CORRUPT_BKPT;
    }
    assert( pc>=iCellFirst && pc<=iCellLast );
    size = pPage->xCellSize(pPage, &src[pc]);
    cbrk -= size;
    if( cbrk<iCellFirst || pc+size>usableSize ){
      return SQLITE_CORRUPT_BKPT;
    }
    assert( cbrk+size<=usableSize && cbrk>=iCellFirst );
    testcase( cbrk+size==usableSize );
    testcase( pc+size==usableSize );

  gap = pPage->cellOffset + 2*pPage->nCell;
  assert( gap<=65536 );
  /* EVIDENCE-OF: R-29356-02391 If the database uses a 65536-byte page size
  ** and the reserved space is zero (the usual value for reserved space)
  ** then the cell content offset of an empty page wants to be 65536.
  ** However, that integer is too large to be stored in a 2-byte unsigned
  ** integer, so a value of 0 is used in its place. */
  top = get2byte(&data[hdr+5]);
  assert( top<=pPage->pBt->usableSize ); /* Prevent by getAndInitPage() */
  if( gap>top ){

    if( top==0 && pPage->pBt->usableSize==65536 ){
      top = 65536;
    }else{
      return SQLITE_CORRUPT_BKPT;
    }
  }

  /* If there is enough space between gap and top for one more cell pointer
  ** array entry offset, and if the freelist is not empty, then search the
  ** freelist looking for a free slot big enough to satisfy the request.
  */
  testcase( gap+2==top );

  BtShared *pBt;     /* A copy of pPage->pBt */

  assert( pPage->hdrOffset==(pPage->pgno==1 ? 100 : 0) );
  assert( sqlite3_mutex_held(pPage->pBt->mutex) );
  pPage->leaf = (u8)(flagByte>>3);  assert( PTF_LEAF == 1<<3 );
  flagByte &= ~PTF_LEAF;
  pPage->childPtrSize = 4-4*pPage->leaf;
  pPage->xCellSize = cellSizePtr;
  pBt = pPage->pBt;
  if( flagByte==(PTF_LEAFDATA | PTF_INTKEY) ){
    /* EVIDENCE-OF: R-03640-13415 A value of 5 means the page is an interior
    ** table b-tree page. */
    assert( (PTF_LEAFDATA|PTF_INTKEY)==5 );
    /* EVIDENCE-OF: R-20501-61796 A value of 13 means the page is a leaf
    ** table b-tree page. */
    assert( (PTF_LEAFDATA|PTF_INTKEY|PTF_LEAF)==13 );
    pPage->intKey = 1;
    if( pPage->leaf ){
      pPage->intKeyLeaf = 1;
      pPage->noPayload = 0;
      pPage->xParseCell = btreeParseCellPtr;
    }else{
      pPage->intKeyLeaf = 0;
      pPage->noPayload = 1;
      pPage->xCellSize = cellSizePtrNoPayload;
      pPage->xParseCell = btreeParseCellPtrNoPayload;
    }
    pPage->maxLocal = pBt->maxLeaf;
    pPage->minLocal = pBt->minLeaf;
  }else if( flagByte==PTF_ZERODATA ){
    /* EVIDENCE-OF: R-27225-53936 A value of 2 means the page is an interior
    ** index b-tree page. */
    assert( (PTF_ZERODATA)==2 );
    /* EVIDENCE-OF: R-16571-11615 A value of 10 means the page is a leaf
    ** index b-tree page. */
    assert( (PTF_ZERODATA|PTF_LEAF)==10 );
    pPage->intKey = 0;
    pPage->intKeyLeaf = 0;
    pPage->noPayload = 0;
    pPage->xParseCell = btreeParseCellPtrIndex;
    pPage->maxLocal = pBt->maxLocal;
    pPage->minLocal = pBt->minLocal;
  }else{
    /* EVIDENCE-OF: R-47608-56469 Any other value for the b-tree page type is
    ** an error. */
    return SQLITE_CORRUPT_BKPT;
  }

      for(i=0; i<pPage->nCell; i++){
        pc = get2byte(&data[cellOffset+i*2]);
        testcase( pc==iCellFirst );
        testcase( pc==iCellLast );
        if( pc<iCellFirst || pc>iCellLast ){
          return SQLITE_CORRUPT_BKPT;
        }
        sz = pPage->xCellSize(pPage, &data[pc]);
        testcase( pc+sz==usableSize );
        if( pc+sz>usableSize ){
          return SQLITE_CORRUPT_BKPT;
        }
      }
      if( !pPage->leaf ) iCellLast++;
    }  

    if( rc ) return rc;
    nCell = pPage->nCell;

    for(i=0; i<nCell; i++){
      u8 *pCell = findCell(pPage, i);
      if( eType==PTRMAP_OVERFLOW1 ){
        CellInfo info;
        pPage->xParseCell(pPage, pCell, &info);
        if( info.iOverflow
         && pCell+info.iOverflow+3<=pPage->aData+pPage->maskPage
         && iFrom==get4byte(&pCell[info.iOverflow])
        ){
          put4byte(&pCell[info.iOverflow], iTo);
          break;
        }

          **
          ** If the record is corrupt, the xRecordCompare routine may read
          ** up to two varints past the end of the buffer. An extra 18 
          ** bytes of padding is allocated at the end of the buffer in
          ** case this happens.  */
          void *pCellKey;
          u8 * const pCellBody = pCell - pPage->childPtrSize;
          pPage->xParseCell(pPage, pCellBody, &pCur->info);
          nCell = (int)pCur->info.nKey;
          testcase( nCell<0 );   /* True if key size is 2^32 or more */
          testcase( nCell==0 );  /* Invalid key size:  0x80 0x80 0x00 */
          testcase( nCell==1 );  /* Invalid key size:  0x80 0x80 0x01 */
          testcase( nCell==2 );  /* Minimum legal index key size */
          if( nCell<2 ){
            rc = SQLITE_CORRUPT_BKPT;

  if( n>=mxPage ){
    return SQLITE_CORRUPT_BKPT;
  }
  if( n>0 ){
    /* There are pages on the freelist.  Reuse one of those pages. */
    Pgno iTrunk;
    u8 searchList = 0; /* If the free-list must be searched for 'nearby' */
    u32 nSearch = 0;   /* Count of the number of search attempts */
    
    /* If eMode==BTALLOC_EXACT and a query of the pointer-map
    ** shows that the page 'nearby' is somewhere on the free-list, then
    ** the entire-list will be searched for that page.
    */
#ifndef SQLITE_OMIT_AUTOVACUUM
    if( eMode==BTALLOC_EXACT ){

      }else{
        /* EVIDENCE-OF: R-59841-13798 The 4-byte big-endian integer at offset 32
        ** stores the page number of the first page of the freelist, or zero if
        ** the freelist is empty. */
        iTrunk = get4byte(&pPage1->aData[32]);
      }
      testcase( iTrunk==mxPage );
      if( iTrunk>mxPage || nSearch++ > n ){
        rc = SQLITE_CORRUPT_BKPT;
      }else{
        rc = btreeGetUnusedPage(pBt, iTrunk, &pTrunk, 0);
      }
      if( rc ){
        pTrunk = 0;
        goto end_allocate_page;

  CellInfo info;
  Pgno ovflPgno;
  int rc;
  int nOvfl;
  u32 ovflPageSize;

  assert( sqlite3_mutex_held(pPage->pBt->mutex) );
  pPage->xParseCell(pPage, pCell, &info);
  *pnSize = info.nSize;
  if( info.iOverflow==0 ){
    return SQLITE_OK;  /* No overflow pages. Return without doing anything */
  }
  if( pCell+info.iOverflow+3 > pPage->aData+pPage->maskPage ){
    return SQLITE_CORRUPT_BKPT;  /* Cell extends past end of page */
  }

  **
  ** Use a call to btreeParseCellPtr() to verify that the values above
  ** were computed correctly.
  */
#if SQLITE_DEBUG
  {
    CellInfo info;
    pPage->xParseCell(pPage, pCell, &info);
    assert( nHeader=(int)(info.pPayload - pCell) );
    assert( info.nKey==nKey );
    assert( *pnSize == info.nSize );
    assert( spaceLeft == info.nLocal );
    assert( pPrior == &pCell[info.iOverflow] );
  }
#endif

  assert( ArraySize(pPage->apOvfl)==ArraySize(pPage->aiOvfl) );
  assert( sqlite3_mutex_held(pPage->pBt->mutex) );
  /* The cell should normally be sized correctly.  However, when moving a
  ** malformed cell from a leaf page to an interior page, if the cell size
  ** wanted to be less than 4 but got rounded up to 4 on the leaf, then size
  ** might be less than 8 (leaf-size + pointer) on the interior node.  Hence
  ** the term after the || in the following assert(). */
  assert( sz==pPage->xCellSize(pPage, pCell) || (sz==8 && iChild>0) );
  if( pPage->nOverflow || sz+2>pPage->nFree ){
    if( pTemp ){
      memcpy(pTemp, pCell, sz);
      pCell = pTemp;
    }
    if( iChild ){
      put4byte(pCell, iChild);
    }
    j = pPage->nOverflow++;
    assert( j<(int)(sizeof(pPage->apOvfl)/sizeof(pPage->apOvfl[0])) );
    pPage->apOvfl[j] = pCell;
    pPage->aiOvfl[j] = (u16)i;

    /* When multiple overflows occur, they are always sequential and in
    ** sorted order.  This invariants arise because multiple overflows can
    ** only occur when inserting divider cells into the parent page during
    ** balancing, and the dividers are adjacent and sorted.
    */
    assert( j==0 || pPage->aiOvfl[j-1]<(u16)i ); /* Overflows in sorted order */
    assert( j==0 || i==pPage->aiOvfl[j-1]+1 );   /* Overflows are sequential */
  }else{
    int rc = sqlite3PagerWrite(pPage->pDbPage);
    if( rc!=SQLITE_OK ){
      *pRC = rc;
      return;
    }
    assert( sqlite3PagerIswriteable(pPage->pDbPage) );

      ** the entry for the overflow page into the pointer map.
      */
      ptrmapPutOvflPtr(pPage, pCell, pRC);
    }
#endif
  }
}

/*
** A CellArray object contains a cache of pointers and sizes for a
** consecutive sequence of cells that might be held multiple pages.
*/
typedef struct CellArray CellArray;
struct CellArray {
  int nCell;              /* Number of cells in apCell[] */
  MemPage *pRef;          /* Reference page */
  u8 **apCell;            /* All cells begin balanced */
  u16 *szCell;            /* Local size of all cells in apCell[] */
};

/*
** Make sure the cell sizes at idx, idx+1, ..., idx+N-1 have been
** computed.
*/
static void populateCellCache(CellArray *p, int idx, int N){
  assert( idx>=0 && idx+N<=p->nCell );
  while( N>0 ){
    assert( p->apCell[idx]!=0 );
    if( p->szCell[idx]==0 ){
      p->szCell[idx] = p->pRef->xCellSize(p->pRef, p->apCell[idx]);
    }else{
      assert( CORRUPT_DB ||
              p->szCell[idx]==p->pRef->xCellSize(p->pRef, p->apCell[idx]) );
    }
    idx++;
    N--;
  }
}

/*
** Return the size of the Nth element of the cell array
*/
static SQLITE_NOINLINE u16 computeCellSize(CellArray *p, int N){
  assert( N>=0 && N<p->nCell );
  assert( p->szCell[N]==0 );
  p->szCell[N] = p->pRef->xCellSize(p->pRef, p->apCell[N]);
  return p->szCell[N];
}
static u16 cachedCellSize(CellArray *p, int N){
  assert( N>=0 && N<p->nCell );
  if( p->szCell[N] ) return p->szCell[N];
  return computeCellSize(p, N);
}

/*
** Array apCell[] contains pointers to nCell b-tree page cells. The 
** szCell[] array contains the size in bytes of each cell. This function
** replaces the current contents of page pPg with the contents of the cell
** array.
**
** Some of the cells in apCell[] may currently be stored in pPg. This
** function works around problems caused by this by making a copy of any 
** such cells before overwriting the page data.
**
** The MemPage.nFree field is invalidated by this function. It is the 
** responsibility of the caller to set it correctly.
*/
static int rebuildPage(
  MemPage *pPg,                   /* Edit this page */
  int nCell,                      /* Final number of cells on page */
  u8 **apCell,                    /* Array of cells */
  u16 *szCell                     /* Array of cell sizes */
){
  const int hdr = pPg->hdrOffset;          /* Offset of header on pPg */
  u8 * const aData = pPg->aData;           /* Pointer to data for pPg */

  pData = pEnd;
  for(i=0; i<nCell; i++){
    u8 *pCell = apCell[i];
    if( pCell>aData && pCell<pEnd ){
      pCell = &pTmp[pCell - aData];
    }
    pData -= szCell[i];

    put2byte(pCellptr, (pData - aData));
    pCellptr += 2;
    if( pData < pCellptr ) return SQLITE_CORRUPT_BKPT;
    memcpy(pData, pCell, szCell[i]);
    assert( szCell[i]==pPg->xCellSize(pPg, pCell) || CORRUPT_DB );
    testcase( szCell[i]!=pPg->xCellSize(pPg,pCell) );
  }

  /* The pPg->nFree field is now set incorrectly. The caller will fix it. */
  pPg->nCell = nCell;
  pPg->nOverflow = 0;

  put2byte(&aData[hdr+1], 0);
  put2byte(&aData[hdr+3], pPg->nCell);
  put2byte(&aData[hdr+5], pData - aData);
  aData[hdr+7] = 0x00;
  return SQLITE_OK;
}

/*
** Array apCell[] contains nCell pointers to b-tree cells. Array szCell
** contains the size in bytes of each such cell. This function attempts to 
** add the cells stored in the array to page pPg. If it cannot (because 
** the page needs to be defragmented before the cells will fit), non-zero

** cells in apCell[], then the cells do not fit and non-zero is returned.
*/
static int pageInsertArray(
  MemPage *pPg,                   /* Page to add cells to */
  u8 *pBegin,                     /* End of cell-pointer array */
  u8 **ppData,                    /* IN/OUT: Page content -area pointer */
  u8 *pCellptr,                   /* Pointer to cell-pointer area */
  int iFirst,                     /* Index of first cell to add */
  int nCell,                      /* Number of cells to add to pPg */
  CellArray *pCArray              /* Array of cells */

){
  int i;
  u8 *aData = pPg->aData;
  u8 *pData = *ppData;
  const int bFreelist = aData[1] || aData[2];
  int iEnd = iFirst + nCell;
  assert( CORRUPT_DB || pPg->hdrOffset==0 );    /* Never called on page 1 */
  for(i=iFirst; i<iEnd; i++){
    int sz, rc;

    u8 *pSlot;
    sz = cachedCellSize(pCArray, i);
    if( bFreelist==0 || (pSlot = pageFindSlot(pPg, sz, &rc, 0))==0 ){
      pData -= sz;
      if( pData<pBegin ) return 1;
      pSlot = pData;
    }
    memcpy(pSlot, pCArray->apCell[i], sz);
    put2byte(pCellptr, (pSlot - aData));
    pCellptr += 2;
  }
  *ppData = pData;
  return 0;
}

/*
** Array apCell[] contains nCell pointers to b-tree cells. Array szCell 
** contains the size in bytes of each such cell. This function adds the
** space associated with each cell in the array that is currently stored 
** within the body of pPg to the pPg free-list. The cell-pointers and other
** fields of the page are not updated.
**
** This function returns the total number of cells added to the free-list.
*/
static int pageFreeArray(
  MemPage *pPg,                   /* Page to edit */
  int iFirst,                     /* First cell to delete */
  int nCell,                      /* Cells to delete */
  CellArray *pCArray              /* Array of cells */

){
  u8 * const aData = pPg->aData;
  u8 * const pEnd = &aData[pPg->pBt->usableSize];
  u8 * const pStart = &aData[pPg->hdrOffset + 8 + pPg->childPtrSize];
  int nRet = 0;
  int i;
  int iEnd = iFirst + nCell;
  u8 *pFree = 0;
  int szFree = 0;

  for(i=iFirst; i<iEnd; i++){
    u8 *pCell = pCArray->apCell[i];
    if( pCell>=pStart && pCell<pEnd ){
      int sz;
      /* No need to use cachedCellSize() here.  The sizes of all cells that
      ** are to be freed have already been computing while deciding which
      ** cells need freeing */
      sz = pCArray->szCell[i];  assert( sz>0 );
      if( pFree!=(pCell + sz) ){
        if( pFree ){
          assert( pFree>aData && (pFree - aData)<65536 );
          freeSpace(pPg, (u16)(pFree - aData), szFree);
        }
        pFree = pCell;
        szFree = sz;

**
** This routine makes the necessary adjustments to pPg so that it contains
** the correct cells after being balanced.
**
** The pPg->nFree field is invalid when this function returns. It is the
** responsibility of the caller to set it correctly.
*/
static int editPage(
  MemPage *pPg,                   /* Edit this page */
  int iOld,                       /* Index of first cell currently on page */
  int iNew,                       /* Index of new first cell on page */
  int nNew,                       /* Final number of cells on page */
  CellArray *pCArray              /* Array of cells and sizes */

){
  u8 * const aData = pPg->aData;
  const int hdr = pPg->hdrOffset;
  u8 *pBegin = &pPg->aCellIdx[nNew * 2];
  int nCell = pPg->nCell;       /* Cells stored on pPg */
  u8 *pData;
  u8 *pCellptr;
  int i;
  int iOldEnd = iOld + pPg->nCell + pPg->nOverflow;
  int iNewEnd = iNew + nNew;

#ifdef SQLITE_DEBUG
  u8 *pTmp = sqlite3PagerTempSpace(pPg->pBt->pPager);
  memcpy(pTmp, aData, pPg->pBt->usableSize);
#endif

  /* Remove cells from the start and end of the page */
  if( iOld<iNew ){
    int nShift = pageFreeArray(pPg, iOld, iNew-iOld, pCArray);


    memmove(pPg->aCellIdx, &pPg->aCellIdx[nShift*2], nCell*2);
    nCell -= nShift;
  }
  if( iNewEnd < iOldEnd ){
    nCell -= pageFreeArray(pPg, iNewEnd, iOldEnd - iNewEnd, pCArray);


  }

  pData = &aData[get2byteNotZero(&aData[hdr+5])];
  if( pData<pBegin ) goto editpage_fail;

  /* Add cells to the start of the page */
  if( iNew<iOld ){
    int nAdd = MIN(nNew,iOld-iNew);
    assert( (iOld-iNew)<nNew || nCell==0 || CORRUPT_DB );
    pCellptr = pPg->aCellIdx;
    memmove(&pCellptr[nAdd*2], pCellptr, nCell*2);
    if( pageInsertArray(
          pPg, pBegin, &pData, pCellptr,
          iNew, nAdd, pCArray
    ) ) goto editpage_fail;
    nCell += nAdd;
  }

  /* Add any overflow cells */
  for(i=0; i<pPg->nOverflow; i++){
    int iCell = (iOld + pPg->aiOvfl[i]) - iNew;
    if( iCell>=0 && iCell<nNew ){
      pCellptr = &pPg->aCellIdx[iCell * 2];
      memmove(&pCellptr[2], pCellptr, (nCell - iCell) * 2);
      nCell++;
      if( pageInsertArray(
            pPg, pBegin, &pData, pCellptr,
            iCell+iNew, 1, pCArray
      ) ) goto editpage_fail;
    }
  }

  /* Append cells to the end of the page */
  pCellptr = &pPg->aCellIdx[nCell*2];
  if( pageInsertArray(
        pPg, pBegin, &pData, pCellptr,
        iNew+nCell, nNew-nCell, pCArray
  ) ) goto editpage_fail;

  pPg->nCell = nNew;
  pPg->nOverflow = 0;

  put2byte(&aData[hdr+3], pPg->nCell);
  put2byte(&aData[hdr+5], pData - aData);

#ifdef SQLITE_DEBUG
  for(i=0; i<nNew && !CORRUPT_DB; i++){
    u8 *pCell = pCArray->apCell[i+iNew];
    int iOff = get2byte(&pPg->aCellIdx[i*2]);
    if( pCell>=aData && pCell<&aData[pPg->pBt->usableSize] ){
      pCell = &pTmp[pCell - aData];
    }
    assert( 0==memcmp(pCell, &aData[iOff],
            pCArray->pRef->xCellSize(pCArray->pRef, pCArray->apCell[i+iNew])) );
  }
#endif

  return SQLITE_OK;
 editpage_fail:
  /* Unable to edit this page. Rebuild it from scratch instead. */
  populateCellCache(pCArray, iNew, nNew);
  return rebuildPage(pPg, nNew, &pCArray->apCell[iNew], &pCArray->szCell[iNew]);
}

/*
** The following parameters determine how many adjacent pages get involved
** in a balancing operation.  NN is the number of neighbors on either side
** of the page that participate in the balancing operation.  NB is the
** total number of pages that participate, including the target page and

  */
  rc = allocateBtreePage(pBt, &pNew, &pgnoNew, 0, 0);

  if( rc==SQLITE_OK ){

    u8 *pOut = &pSpace[4];
    u8 *pCell = pPage->apOvfl[0];
    u16 szCell = pPage->xCellSize(pPage, pCell);
    u8 *pStop;

    assert( sqlite3PagerIswriteable(pNew->pDbPage) );
    assert( pPage->aData[0]==(PTF_INTKEY|PTF_LEAFDATA|PTF_LEAF) );
    zeroPage(pNew, PTF_INTKEY|PTF_LEAFDATA|PTF_LEAF);
    rc = rebuildPage(pNew, 1, &pCell, &szCell);
    if( NEVER(rc) ) return rc;
    pNew->nFree = pBt->usableSize - pNew->cellOffset - 2 - szCell;

    /* If this is an auto-vacuum database, update the pointer map
    ** with entries for the new page, and any pointer from the 
    ** cell on the page to an overflow page. If either of these
    ** operations fails, the return code is set, but the contents
    ** of the parent page are still manipulated by thh code below.

    assert( pPage->isInit );

    for(j=0; j<pPage->nCell; j++){
      CellInfo info;
      u8 *z;
     
      z = findCell(pPage, j);
      pPage->xParseCell(pPage, z, &info);
      if( info.iOverflow ){
        Pgno ovfl = get4byte(&z[info.iOverflow]);
        ptrmapGet(pBt, ovfl, &e, &n);
        assert( n==pPage->pgno && e==PTRMAP_OVERFLOW1 );
      }
      if( !pPage->leaf ){
        Pgno child = get4byte(z);

  MemPage *pParent,               /* Parent page of siblings being balanced */
  int iParentIdx,                 /* Index of "the page" in pParent */
  u8 *aOvflSpace,                 /* page-size bytes of space for parent ovfl */
  int isRoot,                     /* True if pParent is a root-page */
  int bBulk                       /* True if this call is part of a bulk load */
){
  BtShared *pBt;               /* The whole database */

  int nMaxCells = 0;           /* Allocated size of apCell, szCell, aFrom. */
  int nNew = 0;                /* Number of pages in apNew[] */
  int nOld;                    /* Number of pages in apOld[] */
  int i, j, k;                 /* Loop counters */
  int nxDiv;                   /* Next divider slot in pParent->aCell[] */
  int rc = SQLITE_OK;          /* The return code */
  u16 leafCorrection;          /* 4 if pPage is a leaf.  0 if not */
  int leafData;                /* True if pPage is a leaf of a LEAFDATA tree */
  int usableSpace;             /* Bytes in pPage beyond the header */
  int pageFlags;               /* Value of pPage->aData[0] */

  int iSpace1 = 0;             /* First unused byte of aSpace1[] */
  int iOvflSpace = 0;          /* First unused byte of aOvflSpace[] */
  int szScratch;               /* Size of scratch memory requested */
  MemPage *apOld[NB];          /* pPage and up to two siblings */
  MemPage *apNew[NB+2];        /* pPage and up to NB siblings after balancing */
  u8 *pRight;                  /* Location in parent of right-sibling pointer */
  u8 *apDiv[NB-1];             /* Divider cells in pParent */
  int cntNew[NB+2];            /* Index in b.paCell[] of cell after i-th page */
  int cntOld[NB+2];            /* Old index in b.apCell[] */
  int szNew[NB+2];             /* Combined size of cells placed on i-th page */


  u8 *aSpace1;                 /* Space for copies of dividers cells */
  Pgno pgno;                   /* Temp var to store a page number in */
  u8 abDone[NB+2];             /* True after i'th new page is populated */
  Pgno aPgno[NB+2];            /* Page numbers of new pages before shuffling */
  Pgno aPgOrder[NB+2];         /* Copy of aPgno[] used for sorting pages */
  u16 aPgFlags[NB+2];          /* flags field of new pages before shuffling */
  CellArray b;                  /* Parsed information on cells being balanced */

  memset(abDone, 0, sizeof(abDone));
  b.nCell = 0;
  b.apCell = 0;
  pBt = pParent->pBt;
  assert( sqlite3_mutex_held(pBt->mutex) );
  assert( sqlite3PagerIswriteable(pParent->pDbPage) );

#if 0
  TRACE(("BALANCE: begin page %d child of %d\n", pPage->pgno, pParent->pgno));
#endif

    }
    nMaxCells += 1+apOld[i]->nCell+apOld[i]->nOverflow;
    if( (i--)==0 ) break;

    if( i+nxDiv==pParent->aiOvfl[0] && pParent->nOverflow ){
      apDiv[i] = pParent->apOvfl[0];
      pgno = get4byte(apDiv[i]);
      szNew[i] = pParent->xCellSize(pParent, apDiv[i]);
      pParent->nOverflow = 0;
    }else{
      apDiv[i] = findCell(pParent, i+nxDiv-pParent->nOverflow);
      pgno = get4byte(apDiv[i]);
      szNew[i] = pParent->xCellSize(pParent, apDiv[i]);

      /* Drop the cell from the parent page. apDiv[i] still points to
      ** the cell within the parent, even though it has been dropped.
      ** This is safe because dropping a cell only overwrites the first
      ** four bytes of it, and this function does not need the first
      ** four bytes of the divider cell. So the pointer is safe to use
      ** later on.  

  ** alignment */
  nMaxCells = (nMaxCells + 3)&~3;

  /*
  ** Allocate space for memory structures
  */
  szScratch =
       nMaxCells*sizeof(u8*)                       /* b.apCell */
     + nMaxCells*sizeof(u16)                       /* b.szCell */
     + pBt->pageSize;                              /* aSpace1 */

  /* EVIDENCE-OF: R-28375-38319 SQLite will never request a scratch buffer
  ** that is more than 6 times the database page size. */
  assert( szScratch<=6*(int)pBt->pageSize );
  b.apCell = sqlite3ScratchMalloc( szScratch ); 
  if( b.apCell==0 ){
    rc = SQLITE_NOMEM;
    goto balance_cleanup;
  }
  b.szCell = (u16*)&b.apCell[nMaxCells];
  aSpace1 = (u8*)&b.szCell[nMaxCells];
  assert( EIGHT_BYTE_ALIGNMENT(aSpace1) );

  /*
  ** Load pointers to all cells on sibling pages and the divider cells
  ** into the local b.apCell[] array.  Make copies of the divider cells
  ** into space obtained from aSpace1[]. The divider cells have already
  ** been removed from pParent.
  **
  ** If the siblings are on leaf pages, then the child pointers of the
  ** divider cells are stripped from the cells before they are copied
  ** into aSpace1[].  In this way, all cells in b.apCell[] are without
  ** child pointers.  If siblings are not leaves, then all cell in
  ** b.apCell[] include child pointers.  Either way, all cells in b.apCell[]
  ** are alike.
  **
  ** leafCorrection:  4 if pPage is a leaf.  0 if pPage is not a leaf.
  **       leafData:  1 if pPage holds key+data and pParent holds only keys.
  */
  b.pRef = apOld[0];
  leafCorrection = b.pRef->leaf*4;
  leafData = b.pRef->intKeyLeaf;
  for(i=0; i<nOld; i++){

    MemPage *pOld = apOld[i];
    int limit = pOld->nCell;
    u8 *aData = pOld->aData;
    u16 maskPage = pOld->maskPage;
    u8 *piCell = aData + pOld->cellOffset;
    u8 *piEnd;

    /* Verify that all sibling pages are of the same "type" (table-leaf,
    ** table-interior, index-leaf, or index-interior).
    */
    if( pOld->aData[0]!=apOld[0]->aData[0] ){
      rc = SQLITE_CORRUPT_BKPT;
      goto balance_cleanup;
    }

    /* Load b.apCell[] with pointers to all cells in pOld.  If pOld
    ** constains overflow cells, include them in the b.apCell[] array
    ** in the correct spot.
    **
    ** Note that when there are multiple overflow cells, it is always the
    ** case that they are sequential and adjacent.  This invariant arises
    ** because multiple overflows can only occurs when inserting divider
    ** cells into a parent on a prior balance, and divider cells are always
    ** adjacent and are inserted in order.  There is an assert() tagged
    ** with "NOTE 1" in the overflow cell insertion loop to prove this
    ** invariant.
    **
    ** This must be done in advance.  Once the balance starts, the cell
    ** offset section of the btree page will be overwritten and we will no
    ** long be able to find the cells if a pointer to each cell is not saved
    ** first.
    */
    memset(&b.szCell[b.nCell], 0, sizeof(b.szCell[0])*limit);
    if( pOld->nOverflow>0 ){
      memset(&b.szCell[b.nCell+limit], 0, sizeof(b.szCell[0])*pOld->nOverflow);
      limit = pOld->aiOvfl[0];
      for(j=0; j<limit; j++){

        b.apCell[b.nCell] = aData + (maskPage & get2byte(piCell));
        piCell += 2;
        b.nCell++;
      }

      for(k=0; k<pOld->nOverflow; k++){
        assert( k==0 || pOld->aiOvfl[k-1]+1==pOld->aiOvfl[k] );/* NOTE 1 */
        b.apCell[b.nCell] = pOld->apOvfl[k];
        b.nCell++;
      }
    }
    piEnd = aData + pOld->cellOffset + 2*pOld->nCell;

    while( piCell<piEnd ){
      assert( b.nCell<nMaxCells );
      b.apCell[b.nCell] = aData + (maskPage & get2byte(piCell));
      piCell += 2;
      b.nCell++;
    }

    cntOld[i] = b.nCell;
    if( i<nOld-1 && !leafData){
      u16 sz = (u16)szNew[i];
      u8 *pTemp;
      assert( b.nCell<nMaxCells );
      b.szCell[b.nCell] = sz;
      pTemp = &aSpace1[iSpace1];
      iSpace1 += sz;
      assert( sz<=pBt->maxLocal+23 );
      assert( iSpace1 <= (int)pBt->pageSize );
      memcpy(pTemp, apDiv[i], sz);
      b.apCell[b.nCell] = pTemp+leafCorrection;
      assert( leafCorrection==0 || leafCorrection==4 );
      b.szCell[b.nCell] = b.szCell[b.nCell] - leafCorrection;
      if( !pOld->leaf ){
        assert( leafCorrection==0 );
        assert( pOld->hdrOffset==0 );
        /* The right pointer of the child page pOld becomes the left
        ** pointer of the divider cell */
        memcpy(b.apCell[b.nCell], &pOld->aData[8], 4);
      }else{
        assert( leafCorrection==4 );
        while( b.szCell[b.nCell]<4 ){
          /* Do not allow any cells smaller than 4 bytes. If a smaller cell
          ** does exist, pad it with 0x00 bytes. */
          assert( b.szCell[b.nCell]==3 || CORRUPT_DB );
          assert( b.apCell[b.nCell]==&aSpace1[iSpace1-3] || CORRUPT_DB );
          aSpace1[iSpace1++] = 0x00;
          b.szCell[b.nCell]++;
        }
      }
      b.nCell++;
    }
  }

  /*
  ** Figure out the number of pages needed to hold all b.nCell cells.
  ** Store this number in "k".  Also compute szNew[] which is the total
  ** size of all cells on the i-th page and cntNew[] which is the index
  ** in b.apCell[] of the cell that divides page i from page i+1.  
  ** cntNew[k] should equal b.nCell.
  **
  ** Values computed by this block:
  **
  **           k: The total number of sibling pages
  **    szNew[i]: Spaced used on the i-th sibling page.
  **   cntNew[i]: Index in b.apCell[] and b.szCell[] for the first cell to
  **              the right of the i-th sibling page.
  ** usableSpace: Number of bytes of space available on each sibling.
  ** 
  */
  usableSpace = pBt->usableSize - 12 + leafCorrection;
  for(i=0; i<nOld; i++){
    MemPage *p = apOld[i];
    szNew[i] = usableSpace - p->nFree;
    if( szNew[i]<0 ){ rc = SQLITE_CORRUPT_BKPT; goto balance_cleanup; }
    for(j=0; j<p->nOverflow; j++){
      szNew[i] += 2 + p->xCellSize(p, p->apOvfl[j]);
    }
    cntNew[i] = cntOld[i];
  }
  k = nOld;
  for(i=0; i<k; i++){
    int sz;
    while( szNew[i]>usableSpace ){
      if( i+1>=k ){
        k = i+2;
        if( k>NB+2 ){ rc = SQLITE_CORRUPT_BKPT; goto balance_cleanup; }
        szNew[k-1] = 0;
        cntNew[k-1] = b.nCell;
      }
      sz = 2 + cachedCellSize(&b, cntNew[i]-1);
      szNew[i] -= sz;
      if( !leafData ){
        if( cntNew[i]<b.nCell ){
          sz = 2 + cachedCellSize(&b, cntNew[i]);
        }else{
          sz = 0;


        }
      }
      szNew[i+1] += sz;
      cntNew[i]--;
    }
    while( cntNew[i]<b.nCell ){
      sz = 2 + cachedCellSize(&b, cntNew[i]);
      if( szNew[i]+sz>usableSpace ) break;
      szNew[i] += sz;
      cntNew[i]++;
      if( !leafData ){
        if( cntNew[i]<b.nCell ){
          sz = 2 + cachedCellSize(&b, cntNew[i]);
        }else{
          sz = 0;
        }
      }
      szNew[i+1] -= sz;
    }
    if( cntNew[i]>=b.nCell ){
      k = i+1;
    }else if( cntNew[i] <= (i>0 ? cntNew[i-1] : 0) ){
      rc = SQLITE_CORRUPT_BKPT;
      goto balance_cleanup;
    }
  }

  /*
  ** The packing computed by the previous block is biased toward the siblings
  ** on the left side (siblings with smaller keys). The left siblings are
  ** always nearly full, while the right-most sibling might be nearly empty.
  ** The next block of code attempts to adjust the packing of siblings to
  ** get a better balance.
  **
  ** This adjustment is more than an optimization.  The packing above might
  ** be so out of balance as to be illegal.  For example, the right-most
  ** sibling might be completely empty.  This adjustment is not optional.
  */
  for(i=k-1; i>0; i--){
    int szRight = szNew[i];  /* Size of sibling on the right */
    int szLeft = szNew[i-1]; /* Size of sibling on the left */
    int r;              /* Index of right-most cell in left sibling */
    int d;              /* Index of first cell to the left of right sibling */

    r = cntNew[i-1] - 1;
    d = r + 1 - leafData;
    (void)cachedCellSize(&b, d);
    do{
      assert( d<nMaxCells );
      assert( r<nMaxCells );
      (void)cachedCellSize(&b, r);
      if( szRight!=0
       && (bBulk || szRight+b.szCell[d]+2 > szLeft-(b.szCell[r]+2)) ){

        break;
      }
      szRight += b.szCell[d] + 2;
      szLeft -= b.szCell[r] + 2;
      cntNew[i-1] = r;


      r--;
      d--;
    }while( r>=0 );
    szNew[i] = szRight;
    szNew[i-1] = szLeft;
    if( cntNew[i-1] <= (i>1 ? cntNew[i-2] : 0) ){
      rc = SQLITE_CORRUPT_BKPT;
      goto balance_cleanup;
    }
  }

  /* Sanity check:  For a non-corrupt database file one of the follwing
  ** must be true:
  **    (1) We found one or more cells (cntNew[0])>0), or
  **    (2) pPage is a virtual root page.  A virtual root page is when
  **        the real root page is page 1 and we are the only child of

    }else{
      assert( i>0 );
      rc = allocateBtreePage(pBt, &pNew, &pgno, (bBulk ? 1 : pgno), 0);
      if( rc ) goto balance_cleanup;
      zeroPage(pNew, pageFlags);
      apNew[i] = pNew;
      nNew++;
      cntOld[i] = b.nCell;

      /* Set the pointer-map entry for the new sibling page. */
      if( ISAUTOVACUUM ){
        ptrmapPut(pBt, pNew->pgno, PTRMAP_BTREE, pParent->pgno, &rc);
        if( rc!=SQLITE_OK ){
          goto balance_cleanup;
        }

    MemPage *pNew = apNew[0];
    u8 *aOld = pNew->aData;
    int cntOldNext = pNew->nCell + pNew->nOverflow;
    int usableSize = pBt->usableSize;
    int iNew = 0;
    int iOld = 0;

    for(i=0; i<b.nCell; i++){
      u8 *pCell = b.apCell[i];
      if( i==cntOldNext ){
        MemPage *pOld = (++iOld)<nNew ? apNew[iOld] : apOld[iOld];
        cntOldNext += pOld->nCell + pOld->nOverflow + !leafData;
        aOld = pOld->aData;
      }
      if( i==cntNew[iNew] ){
        pNew = apNew[++iNew];

       || pNew->pgno!=aPgno[iOld]
       || pCell<aOld
       || pCell>=&aOld[usableSize]
      ){
        if( !leafCorrection ){
          ptrmapPut(pBt, get4byte(pCell), PTRMAP_BTREE, pNew->pgno, &rc);
        }
        if( cachedCellSize(&b,i)>pNew->minLocal ){
          ptrmapPutOvflPtr(pNew, pCell, &rc);
        }
        if( rc ) goto balance_cleanup;
      }
    }
  }

  /* Insert new divider cells into pParent. */
  for(i=0; i<nNew-1; i++){
    u8 *pCell;
    u8 *pTemp;
    int sz;
    MemPage *pNew = apNew[i];
    j = cntNew[i];

    assert( j<nMaxCells );
    assert( b.apCell[j]!=0 );
    pCell = b.apCell[j];
    sz = b.szCell[j] + leafCorrection;
    pTemp = &aOvflSpace[iOvflSpace];
    if( !pNew->leaf ){
      memcpy(&pNew->aData[8], pCell, 4);
    }else if( leafData ){
      /* If the tree is a leaf-data tree, and the siblings are leaves, 
      ** then there is no divider cell in b.apCell[]. Instead, the divider 
      ** cell consists of the integer key for the right-most cell of 
      ** the sibling-page assembled above only.
      */
      CellInfo info;
      j--;
      pNew->xParseCell(pNew, b.apCell[j], &info);
      pCell = pTemp;
      sz = 4 + putVarint(&pCell[4], info.nKey);
      pTemp = 0;
    }else{
      pCell -= 4;
      /* Obscure case for non-leaf-data trees: If the cell at pCell was
      ** previously stored on a leaf node, and its reported size was 4
      ** bytes, then it may actually be smaller than this 
      ** (see btreeParseCellPtr(), 4 bytes is the minimum size of
      ** any cell). But it is important to pass the correct size to 
      ** insertCell(), so reparse the cell now.
      **
      ** Note that this can never happen in an SQLite data file, as all
      ** cells are at least 4 bytes. It only happens in b-trees used
      ** to evaluate "IN (SELECT ...)" and similar clauses.
      */
      if( b.szCell[j]==4 ){
        assert(leafCorrection==4);
        sz = pParent->xCellSize(pParent, pCell);
      }
    }
    iOvflSpace += sz;
    assert( sz<=pBt->maxLocal+23 );
    assert( iOvflSpace <= (int)pBt->pageSize );
    insertCell(pParent, nxDiv+i, pCell, sz, pTemp, pNew->pgno, &rc);
    if( rc!=SQLITE_OK ) goto balance_cleanup;

      ** only after iPg+1 has already been updated. */
      assert( cntNew[iPg]>=cntOld[iPg] || abDone[iPg+1] );

      if( iPg==0 ){
        iNew = iOld = 0;
        nNewCell = cntNew[0];
      }else{
        iOld = iPg<nOld ? (cntOld[iPg-1] + !leafData) : b.nCell;
        iNew = cntNew[iPg-1] + !leafData;
        nNewCell = cntNew[iPg] - iNew;
      }

      rc = editPage(apNew[iPg], iOld, iNew, nNewCell, &b);
      if( rc ) goto balance_cleanup;
      abDone[iPg]++;
      apNew[iPg]->nFree = usableSpace-szNew[iPg];
      assert( apNew[iPg]->nOverflow==0 );
      assert( apNew[iPg]->nCell==nNewCell );
    }
  }

      u32 key = get4byte(&apNew[i]->aData[8]);
      ptrmapPut(pBt, key, PTRMAP_BTREE, apNew[i]->pgno, &rc);
    }
  }

  assert( pParent->isInit );
  TRACE(("BALANCE: finished: old=%d new=%d cells=%d\n",
          nOld, nNew, b.nCell));

  /* Free any old pages that were not reused as new pages.
  */
  for(i=nNew; i<nOld; i++){
    freePage(apOld[i], &rc);
  }

  }
#endif

  /*
  ** Cleanup before returning.
  */
balance_cleanup:
  sqlite3ScratchFree(b.apCell);
  for(i=0; i<nOld; i++){
    releasePage(apOld[i]);
  }
  for(i=0; i<nNew; i++){
    releasePage(apNew[i]);
  }

          pCur->pgnoRoot, nKey, nData, pPage->pgno,
          loc==0 ? "overwrite" : "new entry"));
  assert( pPage->isInit );
  newCell = pBt->pTmpSpace;
  assert( newCell!=0 );
  rc = fillInCell(pPage, newCell, pKey, nKey, pData, nData, nZero, &szNew);
  if( rc ) goto end_insert;
  assert( szNew==pPage->xCellSize(pPage, newCell) );
  assert( szNew <= MX_CELL_SIZE(pBt) );
  idx = pCur->aiIdx[pCur->iPage];
  if( loc==0 ){
    u16 szOld;
    assert( idx<pPage->nCell );
    rc = sqlite3PagerWrite(pPage->pDbPage);
    if( rc ){

    MemPage *pLeaf = pCur->apPage[pCur->iPage];
    int nCell;
    Pgno n = pCur->apPage[iCellDepth+1]->pgno;
    unsigned char *pTmp;

    pCell = findCell(pLeaf, pLeaf->nCell-1);
    if( pCell<&pLeaf->aData[4] ) return SQLITE_CORRUPT_BKPT;
    nCell = pLeaf->xCellSize(pLeaf, pCell);
    assert( MX_CELL_SIZE(pBt) >= nCell );
    pTmp = pBt->pTmpSpace;
    assert( pTmp!=0 );
    rc = sqlite3PagerWrite(pLeaf->pDbPage);
    insertCell(pPage, iCellIdx, pCell-4, nCell+4, pTmp, n, &rc);
    dropCell(pLeaf, pLeaf->nCell-1, nCell, &rc);
    if( rc ) return rc;

    /* Check payload overflow pages
    */
    pCheck->zPfx = "On tree page %d cell %d: ";
    pCheck->v1 = iPage;
    pCheck->v2 = i;
    pCell = findCell(pPage,i);
    pPage->xParseCell(pPage, pCell, &info);
    sz = info.nPayload;
    /* For intKey pages, check that the keys are in order.
    */
    if( pPage->intKey ){
      if( i==0 ){
        nMinKey = nMaxKey = info.nKey;
      }else if( info.nKey <= nMaxKey ){

    cellStart = hdr + 12 - 4*pPage->leaf;
    /* EVIDENCE-OF: R-02776-14802 The cell pointer array consists of K 2-byte
    ** integer offsets to the cell contents. */
    for(i=0; i<nCell; i++){
      int pc = get2byte(&data[cellStart+i*2]);
      u32 size = 65536;
      if( pc<=usableSize-4 ){
        size = pPage->xCellSize(pPage, &data[pc]);
      }
      if( (int)(pc+size-1)>=usableSize ){
        pCheck->zPfx = 0;
        checkAppendMsg(pCheck,
            "Corruption detected in cell %d on page %d",i,iPage);
      }else{
        btreeHeapInsert(heap, (pc<<16)|(pc+size-1));

}

/* 
** Mark this cursor as an incremental blob cursor.
*/
void sqlite3BtreeIncrblobCursor(BtCursor *pCur){
  pCur->curFlags |= BTCF_Incrblob;
  pCur->pBtree->hasIncrblobCur = 1;
}
#endif

/*
** Set both the "read version" (single byte at byte offset 18) and 
** "write version" (single byte at byte offset 19) fields in the database
** header to iVersion.

** small cells will be rare, but they are possible.
*/
#define MX_CELL(pBt) ((pBt->pageSize-8)/6)

/* Forward declarations */
typedef struct MemPage MemPage;
typedef struct BtLock BtLock;
typedef struct CellInfo CellInfo;

/*
** This is a magic string that appears at the beginning of every
** SQLite database in order to identify the file as a real database.
**
** You can change this value at compile-time by specifying a
** -DSQLITE_FILE_HEADER="..." on the compiler command-line.  The

                       ** non-overflow cell */
  u8 *apOvfl[5];       /* Pointers to the body of overflow cells */
  BtShared *pBt;       /* Pointer to BtShared that this page is part of */
  u8 *aData;           /* Pointer to disk image of the page data */
  u8 *aDataEnd;        /* One byte past the end of usable data */
  u8 *aCellIdx;        /* The cell index area */
  DbPage *pDbPage;     /* Pager page handle */
  u16 (*xCellSize)(MemPage*,u8*);             /* cellSizePtr method */
  void (*xParseCell)(MemPage*,u8*,CellInfo*); /* btreeParseCell method */
  Pgno pgno;           /* Page number for this page */
};

/*
** The in-memory image of a disk page has the auxiliary information appended
** to the end.  EXTRA_SIZE is the number of bytes of space needed to hold
** that extra information.

*/
struct Btree {
  sqlite3 *db;       /* The database connection holding this btree */
  BtShared *pBt;     /* Sharable content of this btree */
  u8 inTrans;        /* TRANS_NONE, TRANS_READ or TRANS_WRITE */
  u8 sharable;       /* True if we can share pBt with another db */
  u8 locked;         /* True if db currently has pBt locked */
  u8 hasIncrblobCur; /* True if there are one or more Incrblob cursors */
  int wantToLock;    /* Number of nested calls to sqlite3BtreeEnter() */
  int nBackup;       /* Number of backup operations reading this btree */
  u32 iDataVersion;  /* Combines with pBt->pPager->iDataVersion */
  Btree *pNext;      /* List of other sharable Btrees from the same db */
  Btree *pPrev;      /* Back pointer of the same list */
#ifndef SQLITE_OMIT_SHARED_CACHE
  BtLock lock;       /* Object used to lock page 1 */

#define BTS_PENDING          0x0040   /* Waiting for read-locks to clear */

/*
** An instance of the following structure is used to hold information
** about a cell.  The parseCellPtr() function fills in this structure
** based on information extract from the raw disk page.
*/

struct CellInfo {
  i64 nKey;      /* The key for INTKEY tables, or nPayload otherwise */
  u8 *pPayload;  /* Pointer to the start of payload */
  u32 nPayload;  /* Bytes of payload */
  u16 nLocal;    /* Amount of payload held locally, not on overflow */
  u16 iOverflow; /* Offset to overflow page number.  Zero if no overflow */
  u16 nSize;     /* Size of the cell content on the main b-tree page */

      }

      /* The UNLIKELY() function is a no-op.  The result is the value
      ** of the first argument.
      */
      if( pDef->funcFlags & SQLITE_FUNC_UNLIKELY ){
        assert( nFarg>=1 );
        inReg = sqlite3ExprCodeTarget(pParse, pFarg->a[0].pExpr, target);
        break;
      }

      for(i=0; i<nFarg; i++){
        if( i<32 && sqlite3ExprIsConstant(pFarg->a[i].pExpr) ){
          testcase( i==31 );
          constMask |= MASKBIT32(i);

        if( ExprHasProperty(pItem->pExpr, EP_Agg) ){
          sqlite3ErrorMsg(pParse, "aggregate functions are not allowed in "
              "the GROUP BY clause");
          return WRC_Abort;
        }
      }
    }

    /* If this is part of a compound SELECT, check that it has the right
    ** number of expressions in the select list. */
    if( p->pNext && p->pEList->nExpr!=p->pNext->pEList->nExpr ){
      sqlite3SelectWrongNumTermsError(pParse, p->pNext);
      return WRC_Abort;
    }

    /* Advance to the next term of the compound
    */
    p = p->pPrior;
    nCompound++;
  }

*/
static void setJoinExpr(Expr *p, int iTable){
  while( p ){
    ExprSetProperty(p, EP_FromJoin);
    assert( !ExprHasProperty(p, EP_TokenOnly|EP_Reduced) );
    ExprSetVVAProperty(p, EP_NoReduce);
    p->iRightJoinTable = (i16)iTable;
    if( p->op==TK_FUNCTION && p->x.pList ){
      int i;
      for(i=0; i<p->x.pList->nExpr; i++){
        setJoinExpr(p->x.pList->a[i].pExpr, iTable);
      }
    }
    setJoinExpr(p->pLeft, iTable);
    p = p->pRight;
  } 
}

/*
** This routine processes the join information for a SELECT statement.

      assert( pTab && pExpr->pTab==pTab );
      if( pS ){
        /* The "table" is actually a sub-select or a view in the FROM clause
        ** of the SELECT statement. Return the declaration type and origin
        ** data for the result-set column of the sub-select.
        */
        if( iCol>=0 && ALWAYS(iCol<pS->pEList->nExpr) ){
          /* If iCol is less than zero, then the expression requests the
          ** rowid of the sub-select or view. This expression is legal (see 
          ** test case misc2.2.2) - it always evaluates to NULL.
          **
          ** The ALWAYS() is because iCol>=pS->pEList->nExpr will have been
          ** caught already by name resolution.
          */
          NameContext sNC;
          Expr *p = pS->pEList->a[iCol].pExpr;
          sNC.pSrcList = pS->pSrc;
          sNC.pNext = pNC;
          sNC.pParse = pNC->pParse;
          zType = columnType(&sNC, p,&zOrigDb,&zOrigTab,&zOrigCol, &estWidth); 

  CollSeq *pRet;
  if( p->pPrior ){
    pRet = multiSelectCollSeq(pParse, p->pPrior, iCol);
  }else{
    pRet = 0;
  }
  assert( iCol>=0 );
  /* iCol must be less than p->pEList->nExpr.  Otherwise an error would
  ** have been thrown during name resolution and we would not have gotten
  ** this far */
  if( pRet==0 && ALWAYS(iCol<p->pEList->nExpr) ){
    pRet = sqlite3ExprCollSeq(pParse, p->pEList->a[iCol].pExpr);
  }
  return pRet;
}

/*
** The select statement passed as the second parameter is a compound SELECT

  SelectDest *pDest     /* What to do with query results */
);

/*
** Error message for when two or more terms of a compound select have different
** size result sets.
*/
void sqlite3SelectWrongNumTermsError(Parse *pParse, Select *p){
  if( p->selFlags & SF_Values ){
    sqlite3ErrorMsg(pParse, "all VALUES must have the same number of terms");
  }else{
    sqlite3ErrorMsg(pParse, "SELECTs to the left and right of %s"
      " do not have the same number of result columns", selectOpName(p->op));
  }
}

*/
static int multiSelectValues(
  Parse *pParse,        /* Parsing context */
  Select *p,            /* The right-most of SELECTs to be coded */
  SelectDest *pDest     /* What to do with query results */
){
  Select *pPrior;

  int nRow = 1;
  int rc = 0;
  assert( p->selFlags & SF_MultiValue );
  do{
    assert( p->selFlags & SF_Values );
    assert( p->op==TK_ALL || (p->op==TK_SELECT && p->pPrior==0) );
    assert( p->pLimit==0 );
    assert( p->pOffset==0 );
    assert( p->pNext==0 || p->pEList->nExpr==p->pNext->pEList->nExpr );



    if( p->pPrior==0 ) break;
    assert( p->pPrior->pNext==p );
    p = p->pPrior;
    nRow++;
  }while(1);
  while( p ){
    pPrior = p->pPrior;

    goto multi_select_end;
  }

  /* Make sure all SELECTs in the statement have the same number of elements
  ** in their result sets.
  */
  assert( p->pEList && pPrior->pEList );
  assert( p->pEList->nExpr==pPrior->pEList->nExpr );





#ifndef SQLITE_OMIT_CTE
  if( p->selFlags & SF_Recursive ){
    generateWithRecursiveQuery(pParse, p, &dest);
  }else
#endif

  ** collation.
  */
  aPermute = sqlite3DbMallocRaw(db, sizeof(int)*nOrderBy);
  if( aPermute ){
    struct ExprList_item *pItem;
    for(i=0, pItem=pOrderBy->a; i<nOrderBy; i++, pItem++){
      assert( pItem->u.x.iOrderByCol>0 );
      assert( pItem->u.x.iOrderByCol<=p->pEList->nExpr );


      aPermute[i] = pItem->u.x.iOrderByCol - 1;
    }
    pKeyMerge = multiSelectOrderByKeyInfo(pParse, p, 1);
  }else{
    pKeyMerge = 0;
  }

    if( isAgg || (p->selFlags & SF_Distinct)!=0 || pSrc->nSrc!=1 ){
      return 0;
    }
    for(pSub1=pSub; pSub1; pSub1=pSub1->pPrior){
      testcase( (pSub1->selFlags & (SF_Distinct|SF_Aggregate))==SF_Distinct );
      testcase( (pSub1->selFlags & (SF_Distinct|SF_Aggregate))==SF_Aggregate );
      assert( pSub->pSrc!=0 );
      assert( pSub->pEList->nExpr==pSub1->pEList->nExpr );
      if( (pSub1->selFlags & (SF_Distinct|SF_Aggregate))!=0
       || (pSub1->pPrior && pSub1->op!=TK_ALL) 
       || pSub1->pSrc->nSrc<1

      ){
        return 0;
      }
      testcase( pSub1->pSrc->nSrc>1 );
    }

    /* Restriction 18. */

# define SHELL_USE_LOCAL_GETLINE 1
#endif


#if defined(_WIN32) || defined(WIN32)
# include <io.h>
# include <fcntl.h>
# define isatty(h) _isatty(h)
# ifndef access
#  define access(f,m) _access((f),(m))
# endif
# undef popen
# define popen _popen
# undef pclose
# define pclose _pclose
#else
 /* Make sure isatty() has a prototype. */

 extern int isatty(int);

# if !defined(__RTP__) && !defined(_WRS_KERNEL)
  /* popen and pclose are not C89 functions and so are
  ** sometimes omitted from the <stdio.h> header */
   extern FILE *popen(const char*,const char*);
   extern int pclose(FILE*);
# else
#  define SQLITE_OMIT_POPEN 1
# endif

#endif

#if defined(_WIN32_WCE)
/* Windows CE (arm-wince-mingw32ce-gcc) does not provide isatty()
 * thus we always assume that we have a console. That can be
 * overridden with the -batch command line option.
 */

void sqlite3AlterFunctions(void);
void sqlite3AlterRenameTable(Parse*, SrcList*, Token*);
int sqlite3GetToken(const unsigned char *, int *);
void sqlite3NestedParse(Parse*, const char*, ...);
void sqlite3ExpirePreparedStatements(sqlite3*);
int sqlite3CodeSubselect(Parse *, Expr *, int, int);
void sqlite3SelectPrep(Parse*, Select*, NameContext*);
void sqlite3SelectWrongNumTermsError(Parse *pParse, Select *p);
int sqlite3MatchSpanName(const char*, const char*, const char*, const char*);
int sqlite3ResolveExprNames(NameContext*, Expr*);
void sqlite3ResolveSelectNames(Parse*, Select*, NameContext*);
void sqlite3ResolveSelfReference(Parse*,Table*,int,Expr*,ExprList*);
int sqlite3ResolveOrderGroupBy(Parse*, Select*, ExprList*, const char*);
void sqlite3ColumnDefault(Vdbe *, Table *, int, int);
void sqlite3AlterFinishAddColumn(Parse *, Token *);

/*
** Generate a human-readable explanation of an expression tree.
*/
void sqlite3TreeViewExpr(TreeView *pView, const Expr *pExpr, u8 moreToFollow){
  const char *zBinOp = 0;   /* Binary operator */
  const char *zUniOp = 0;   /* Unary operator */
  char zFlgs[30];
  pView = sqlite3TreeViewPush(pView, moreToFollow);
  if( pExpr==0 ){
    sqlite3TreeViewLine(pView, "nil");
    sqlite3TreeViewPop(pView);
    return;
  }
  if( pExpr->flags ){
    sqlite3_snprintf(sizeof(zFlgs),zFlgs,"  flags=0x%x",pExpr->flags);
  }else{
    zFlgs[0] = 0;
  }
  switch( pExpr->op ){
    case TK_AGG_COLUMN: {
      sqlite3TreeViewLine(pView, "AGG{%d:%d}%s",
            pExpr->iTable, pExpr->iColumn, zFlgs);
      break;
    }
    case TK_COLUMN: {
      if( pExpr->iTable<0 ){
        /* This only happens when coding check constraints */
        sqlite3TreeViewLine(pView, "COLUMN(%d)%s", pExpr->iColumn, zFlgs);
      }else{
        sqlite3TreeViewLine(pView, "{%d:%d}%s",
                             pExpr->iTable, pExpr->iColumn, zFlgs);
      }
      break;
    }
    case TK_INTEGER: {
      if( pExpr->flags & EP_IntValue ){
        sqlite3TreeViewLine(pView, "%d", pExpr->u.iValue);
      }else{

#endif
    default: {
      sqlite3TreeViewLine(pView, "op=%d", pExpr->op);
      break;
    }
  }
  if( zBinOp ){
    sqlite3TreeViewLine(pView, "%s%s", zBinOp, zFlgs);
    sqlite3TreeViewExpr(pView, pExpr->pLeft, 1);
    sqlite3TreeViewExpr(pView, pExpr->pRight, 0);
  }else if( zUniOp ){
    sqlite3TreeViewLine(pView, "%s%s", zUniOp, zFlgs);
    sqlite3TreeViewExpr(pView, pExpr->pLeft, 0);
  }
  sqlite3TreeViewPop(pView);
}

/*
** Generate a human-readable explanation of an expression list.

  assert( p->explain==0 );
  p->pResultSet = 0;
  db->busyHandler.nBusy = 0;
  if( db->u1.isInterrupted ) goto abort_due_to_interrupt;
  sqlite3VdbeIOTraceSql(p);
#ifndef SQLITE_OMIT_PROGRESS_CALLBACK
  if( db->xProgress ){
    u32 iPrior = p->aCounter[SQLITE_STMTSTATUS_VM_STEP];
    assert( 0 < db->nProgressOps );


    nProgressLimit = db->nProgressOps - (iPrior % db->nProgressOps);



  }
#endif
#ifdef SQLITE_DEBUG
  sqlite3BeginBenignMalloc();
  if( p->pc==0
   && (p->db->flags & (SQLITE_VdbeListing|SQLITE_VdbeEQP|SQLITE_VdbeTrace))!=0
  ){

/*
** Make an shallow copy of pFrom into pTo.  Prior contents of
** pTo are freed.  The pFrom->z field is not duplicated.  If
** pFrom->z is used, then pTo->z points to the same thing as pFrom->z
** and flags gets srcType (either MEM_Ephem or MEM_Static).
*/
static SQLITE_NOINLINE void vdbeClrCopy(Mem *pTo, const Mem *pFrom, int eType){
  vdbeMemClearExternAndSetNull(pTo);
  assert( !VdbeMemDynamic(pTo) );
  sqlite3VdbeMemShallowCopy(pTo, pFrom, eType);
}
void sqlite3VdbeMemShallowCopy(Mem *pTo, const Mem *pFrom, int srcType){
  assert( (pFrom->flags & MEM_RowSet)==0 );
  assert( pTo->db==pFrom->db );
  if( VdbeMemDynamic(pTo) ){ vdbeClrCopy(pTo,pFrom,srcType); return; }
  memcpy(pTo, pFrom, MEMCELLSIZE);
  if( (pFrom->flags&MEM_Static)==0 ){
    pTo->flags &= ~(MEM_Dyn|MEM_Static|MEM_Ephem);
    assert( srcType==MEM_Ephem || srcType==MEM_Static );
    pTo->flags |= srcType;
  }
}

  PRAGMA auto_vacuum=0;
  CREATE TABLE t1(x);
  INSERT INTO t1 VALUES(zeroblob(300));
  INSERT INTO t1 VALUES(zeroblob(600));
} {}
do_test 6.1 {
  db close
  hexio_write test.db 616 8FFFFFFF7F02
  sqlite3 db test.db
  breakpoint
  execsql { DELETE FROM t1 WHERE rowid=2 }
} {}

#-------------------------------------------------------------------------
# See what happens if the sqlite_master entry associated with a PRIMARY

/*
** 2015-05-25
**
** The author disclaims copyright to this source code.  In place of
** a legal notice, here is a blessing:
**
**    May you do good and not evil.
**    May you find forgiveness for yourself and forgive others.
**    May you share freely, never taking more than you give.
**
*************************************************************************
**
** This is a utility program designed to aid running regressions tests on
** the SQLite library using data from an external fuzzer, such as American
** Fuzzy Lop (AFL) (http://lcamtuf.coredump.cx/afl/).
**
** This program reads content from an SQLite database file with the following
** schema:
**
**     CREATE TABLE db(
**       dbid INTEGER PRIMARY KEY, -- database id
**       dbcontent BLOB            -- database disk file image
**     );
**     CREATE TABLE xsql(
**       sqlid INTEGER PRIMARY KEY,   -- SQL script id
**       sqltext TEXT                 -- Text of SQL statements to run
**     );
**     CREATE TABLE IF NOT EXISTS readme(
**       msg TEXT -- Human-readable description of this test collection
**     );
**
** For each database file in the DB table, the SQL text in the XSQL table
** is run against that database.  All README.MSG values are printed prior
** to the start of the test (unless the --quiet option is used).  If the
** DB table is empty, then all entries in XSQL are run against an empty
** in-memory database.
**
** This program is looking for crashes, assertion faults, and/or memory leaks.
** No attempt is made to verify the output.  The assumption is that either all
** of the database files or all of the SQL statements are malformed inputs,
** generated by a fuzzer, that need to be checked to make sure they do not
** present a security risk.
**
** This program also includes some command-line options to help with 
** creation and maintenance of the source content database.  The command
**
**     ./fuzzcheck database.db --load-sql FILE...
**
** Loads all FILE... arguments into the XSQL table.  The --load-db option
** works the same but loads the files into the DB table.  The -m option can
** be used to initialize the README table.  The "database.db" file is created
** if it does not previously exist.  Example:
**
**     ./fuzzcheck new.db --load-sql *.sql
**     ./fuzzcheck new.db --load-db *.db
**     ./fuzzcheck new.db -m 'New test cases'
**
** The three commands above will create the "new.db" file and initialize all
** tables.  Then do "./fuzzcheck new.db" to run the tests.
**
** DEBUGGING HINTS:
**
** If fuzzcheck does crash, it can be run in the debugger and the content
** of the global variable g.zTextName[] will identify the specific XSQL and
** DB values that were running when the crash occurred.
*/
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <stdarg.h>
#include <ctype.h>
#include "sqlite3.h"

#ifdef __unix__
# include <signal.h>
# include <unistd.h>
#endif

/*
** Files in the virtual file system.
*/
typedef struct VFile VFile;
struct VFile {
  char *zFilename;        /* Filename.  NULL for delete-on-close. From malloc() */

  va_start(ap, zFormat);
  vfprintf(stderr, zFormat, ap);
  va_end(ap);
  fprintf(stderr, "\n");
  exit(1);
}

/*
** Timeout handler
*/
#ifdef __unix__
static void timeoutHandler(int NotUsed){
  (void)NotUsed;
  fatalError("timeout\n");
}
#endif

/*
** Set the an alarm to go off after N seconds.  Disable the alarm
** if N==0
*/
static void setAlarm(int N){
#ifdef __unix__
  alarm(N);
#else
  (void)N;
#endif
}

#ifndef SQLITE_OMIT_PROGRESS_CALLBACK
/*
** This an SQL progress handler.  After an SQL statement has run for
** many steps, we want to interrupt it.  This guards against infinite
** loops from recursive common table expressions.
**
** *pVdbeLimitFlag is true if the --limit-vdbe command-line option is used.
** In that case, hitting the progress handler is a fatal error.
*/
static int progressHandler(void *pVdbeLimitFlag){
  if( *(int*)pVdbeLimitFlag ) fatalError("too many VDBE cycles");
  return 1;
}
#endif

/*
** Reallocate memory.  Show and error and quit if unable.
*/
static void *safe_realloc(void *pOld, int szNew){
  void *pNew = realloc(pOld, szNew);
  if( pNew==0 ) fatalError("unable to realloc for %d bytes", szNew);
  return pNew;

          }
        }
      }         
      sqlite3_finalize(pStmt);
    }
  }
}

/*
** Rebuild the database file.
**
**    (1)  Remove duplicate entries
**    (2)  Put all entries in order
**    (3)  Vacuum
*/
static void rebuild_database(sqlite3 *db){
  int rc;
  rc = sqlite3_exec(db, 
     "BEGIN;\n"
     "CREATE TEMP TABLE dbx AS SELECT DISTINCT dbcontent FROM db;\n"
     "DELETE FROM db;\n"
     "INSERT INTO db(dbid, dbcontent) SELECT NULL, dbcontent FROM dbx ORDER BY 2;\n"
     "DROP TABLE dbx;\n"
     "CREATE TEMP TABLE sx AS SELECT DISTINCT sqltext FROM xsql;\n"
     "DELETE FROM xsql;\n"
     "INSERT INTO xsql(sqlid,sqltext) SELECT NULL, sqltext FROM sx ORDER BY 2;\n"
     "DROP TABLE sx;\n"
     "COMMIT;\n"
     "PRAGMA page_size=1024;\n"
     "VACUUM;\n", 0, 0, 0);
  if( rc ) fatalError("cannot rebuild: %s", sqlite3_errmsg(db));
}

/*
** Print sketchy documentation for this utility program
*/
static void showHelp(void){
  printf("Usage: %s [options] SOURCE-DB ?ARGS...?\n", g.zArgv0);
  printf(
"Read databases and SQL scripts from SOURCE-DB and execute each script against\n"
"each database, checking for crashes and memory leaks.\n"
"Options:\n"
"  --cell-size-check     Set the PRAGMA cell_size_check=ON\n"
"  --dbid N              Use only the database where dbid=N\n"
"  --help                Show this help text\n"
"  -q                    Reduced output\n"
"  --quiet               Reduced output\n"
"  --limit-vdbe          Panic if an sync SQL runs for more than 100,000 cycles\n"
"  --load-sql ARGS...    Load SQL scripts fro files into SOURCE-DB\n"
"  --load-db ARGS...     Load template databases from files into SOURCE_DB\n"
"  -m TEXT               Add a description to the database\n"
"  --native-vfs          Use the native VFS for initially empty database files\n"
"  --rebuild             Rebuild and vacuum the database file\n"
"  --result-trace        Show the results of each SQL command\n"
"  --sqlid N             Use only SQL where sqlid=N\n"
"  --timeline N          Abort if any single test case needs more than N seconds\n"
"  -v                    Increased output\n"
"  --verbose             Increased output\n"
  );
}

int main(int argc, char **argv){
  sqlite3_int64 iBegin;        /* Start time of this program */
  int quietFlag = 0;           /* True if --quiet or -q */
  int verboseFlag = 0;         /* True if --verbose or -v */
  char *zInsSql = 0;           /* SQL statement for --load-db or --load-sql */
  int iFirstInsArg = 0;        /* First argv[] to use for --load-db or --load-sql */
  sqlite3 *db = 0;             /* The open database connection */
  sqlite3_stmt *pStmt;         /* A prepared statement */
  int rc;                      /* Result code from SQLite interface calls */
  Blob *pSql;                  /* For looping over SQL scripts */
  Blob *pDb;                   /* For looping over template databases */
  int i;                       /* Loop index for the argv[] loop */
  int onlySqlid = -1;          /* --sqlid */
  int onlyDbid = -1;           /* --dbid */
  int nativeFlag = 0;          /* --native-vfs */
  int rebuildFlag = 0;         /* --rebuild */
  int vdbeLimitFlag = 0;       /* --limit-vdbe */
  int timeoutTest = 0;         /* undocumented --timeout-test flag */
  int runFlags = 0;            /* Flags sent to runSql() */
  char *zMsg = 0;              /* Add this message */
  int nSrcDb = 0;              /* Number of source databases */
  char **azSrcDb = 0;          /* Array of source database names */
  int iSrcDb;                  /* Loop over all source databases */
  int nTest = 0;               /* Total number of tests performed */
  char *zDbName = "";          /* Appreviated name of a source database */
  const char *zFailCode = 0;   /* Value of the TEST_FAILURE environment variable */
  int cellSzCkFlag = 0;        /* --cell-size-check */
  int sqlFuzz = 0;             /* True for SQL fuzz testing. False for DB fuzz */
  int iTimeout = 120;          /* Default 120-second timeout */

  iBegin = timeOfDay();
#ifdef __unix__
  signal(SIGALRM, timeoutHandler);
#endif
  g.zArgv0 = argv[0];
  zFailCode = getenv("TEST_FAILURE");
  for(i=1; i<argc; i++){
    const char *z = argv[i];
    if( z[0]=='-' ){
      z++;
      if( z[0]=='-' ) z++;
      if( strcmp(z,"cell-size-check")==0 ){
        cellSzCkFlag = 1;
      }else
      if( strcmp(z,"dbid")==0 ){
        if( i>=argc-1 ) fatalError("missing arguments on %s", argv[i]);
        onlyDbid = atoi(argv[++i]);
      }else
      if( strcmp(z,"help")==0 ){
        showHelp();
        return 0;
      }else
      if( strcmp(z,"limit-vdbe")==0 ){
        vdbeLimitFlag = 1;
      }else
      if( strcmp(z,"load-sql")==0 ){
        zInsSql = "INSERT INTO xsql(sqltext) VALUES(CAST(readfile(?1) AS text))";
        iFirstInsArg = i+1;
        break;
      }else
      if( strcmp(z,"load-db")==0 ){

      }else
      if( strcmp(z,"native-vfs")==0 ){
        nativeFlag = 1;
      }else
      if( strcmp(z,"quiet")==0 || strcmp(z,"q")==0 ){
        quietFlag = 1;
        verboseFlag = 0;
      }else
      if( strcmp(z,"rebuild")==0 ){
        rebuildFlag = 1;
      }else
      if( strcmp(z,"result-trace")==0 ){
        runFlags |= SQL_OUTPUT;
      }else
      if( strcmp(z,"sqlid")==0 ){
        if( i>=argc-1 ) fatalError("missing arguments on %s", argv[i]);
        onlySqlid = atoi(argv[++i]);
      }else
      if( strcmp(z,"timeout")==0 ){
        if( i>=argc-1 ) fatalError("missing arguments on %s", argv[i]);
        iTimeout = atoi(argv[++i]);
      }else
      if( strcmp(z,"timeout-test")==0 ){
        timeoutTest = 1;
#ifndef __unix__
        fatalError("timeout is not available on non-unix systems");
#endif
      }else
      if( strcmp(z,"verbose")==0 || strcmp(z,"v")==0 ){
        quietFlag = 0;
        verboseFlag = 1;
        runFlags |= SQL_TRACE;
      }else
      {

  /* Process each source database separately */
  for(iSrcDb=0; iSrcDb<nSrcDb; iSrcDb++){
    rc = sqlite3_open(azSrcDb[iSrcDb], &db);
    if( rc ){
      fatalError("cannot open source database %s - %s",
      azSrcDb[iSrcDb], sqlite3_errmsg(db));
    }
    rc = sqlite3_exec(db,
       "CREATE TABLE IF NOT EXISTS db(\n"
       "  dbid INTEGER PRIMARY KEY, -- database id\n"
       "  dbcontent BLOB            -- database disk file image\n"
       ");\n"
       "CREATE TABLE IF NOT EXISTS xsql(\n"
       "  sqlid INTEGER PRIMARY KEY,   -- SQL script id\n"
       "  sqltext TEXT                 -- Text of SQL statements to run\n"

        sqlite3_step(pStmt);
        rc = sqlite3_reset(pStmt);
        if( rc ) fatalError("insert failed for %s", argv[i]);
      }
      sqlite3_finalize(pStmt);
      rc = sqlite3_exec(db, "COMMIT", 0, 0, 0);
      if( rc ) fatalError("cannot commit the transaction: %s", sqlite3_errmsg(db));
      rebuild_database(db);
      sqlite3_close(db);
      return 0;
    }
  
    /* Load all SQL script content and all initial database images from the
    ** source db
    */
    blobListLoadFromDb(db, "SELECT sqlid, sqltext FROM xsql", onlySqlid,
                           &g.nSql, &g.pFirstSql);
    if( g.nSql==0 ) fatalError("need at least one SQL script");
    blobListLoadFromDb(db, "SELECT dbid, dbcontent FROM db", onlyDbid,
                       &g.nDb, &g.pFirstDb);
    if( g.nDb==0 ){
      g.pFirstDb = safe_realloc(0, sizeof(Blob));
      memset(g.pFirstDb, 0, sizeof(Blob));
      g.pFirstDb->id = 1;
      g.pFirstDb->seq = 0;
      g.nDb = 1;
      sqlFuzz = 1;
    }
  
    /* Print the description, if there is one */
    if( !quietFlag ){
      int i;
      zDbName = azSrcDb[iSrcDb];
      i = strlen(zDbName) - 1;
      while( i>0 && zDbName[i-1]!='/' && zDbName[i-1]!='\\' ){ i--; }
      zDbName += i;
      sqlite3_prepare_v2(db, "SELECT msg FROM readme", -1, &pStmt, 0);
      if( pStmt && sqlite3_step(pStmt)==SQLITE_ROW ){
        printf("%s: %s\n", zDbName, sqlite3_column_text(pStmt,0));
      }
      sqlite3_finalize(pStmt);
    }

    /* Rebuild the database, if requested */
    if( rebuildFlag ){
      if( !quietFlag ){
        printf("%s: rebuilding... ", zDbName);
        fflush(stdout);
      }
      rebuild_database(db);
      if( !quietFlag ) printf("done\n");
    }
  
    /* Close the source database.  Verify that no SQLite memory allocations are
    ** outstanding.
    */
    sqlite3_close(db);
    if( sqlite3_memory_used()>0 ){
      fatalError("SQLite has memory in use before the start of testing");

        if( nativeFlag && pDb->sz==0 ){
          openFlags |= SQLITE_OPEN_MEMORY;
          zVfs = 0;
        }
        rc = sqlite3_open_v2("main.db", &db, openFlags, zVfs);
        if( rc ) fatalError("cannot open inmem database");
        if( cellSzCkFlag ) runSql(db, "PRAGMA cell_size_check=ON", runFlags);
        setAlarm(iTimeout);
#ifndef SQLITE_OMIT_PROGRESS_CALLBACK
        if( sqlFuzz || vdbeLimitFlag ){
          sqlite3_progress_handler(db, 100000, progressHandler, &vdbeLimitFlag);
        }
#endif
        do{
          runSql(db, (char*)pSql->a, runFlags);
        }while( timeoutTest );
        setAlarm(0);
        sqlite3_close(db);
        if( sqlite3_memory_used()>0 ) fatalError("memory leak");
        reformatVfs();
        nTest++;
        g.zTestName[0] = 0;

        /* Simulate an error if the TEST_FAILURE environment variable is "5".

ifcapable compound {
do_test in-12.10 {
  catchsql {
    SELECT * FROM t2 WHERE a IN (
      SELECT a FROM t3 UNION ALL SELECT a, b FROM t2
    );
  }
} {1 {SELECTs to the left and right of UNION ALL do not have the same number of result columns}}
do_test in-12.11 {
  catchsql {
    SELECT * FROM t2 WHERE a IN (
      SELECT a FROM t3 UNION SELECT a, b FROM t2
    );
  }
} {1 {SELECTs to the left and right of UNION do not have the same number of result columns}}
do_test in-12.12 {
  catchsql {
    SELECT * FROM t2 WHERE a IN (
      SELECT a FROM t3 EXCEPT SELECT a, b FROM t2
    );
  }
} {1 {SELECTs to the left and right of EXCEPT do not have the same number of result columns}}
do_test in-12.13 {
  catchsql {
    SELECT * FROM t2 WHERE a IN (
      SELECT a FROM t3 INTERSECT SELECT a, b FROM t2
    );
  }
} {1 {SELECTs to the left and right of INTERSECT do not have the same number of result columns}}
do_test in-12.14 {
  catchsql {
    SELECT * FROM t2 WHERE a IN (
      SELECT a, b FROM t3 UNION ALL SELECT a, b FROM t2
    );
  }
} {1 {only a single result allowed for a SELECT that is part of an expression}}
do_test in-12.15 {
  catchsql {
    SELECT * FROM t2 WHERE a IN (
      SELECT a, b FROM t3 UNION ALL SELECT a FROM t2
    );
  }
} {1 {SELECTs to the left and right of UNION ALL do not have the same number of result columns}}
}; #ifcapable compound


#------------------------------------------------------------------------
# The following tests check that NULL is handled correctly when it 
# appears as part of a set of values on the right-hand side of an
# IN or NOT IN operator.

    SELECT * FROM abc;
  }
  execsql {
    SELECT * FROM sqlite_master;
    BEGIN;
    SELECT * FROM def;
  } db2
  value_in_range [expr $::pgalloc*2] 0.99 [sqlite3_release_memory]
} [value_in_range [expr $::pgalloc * 2] 0.99]
do_test malloc5-3.2 {
  concat \
    [execsql {SELECT * FROM abc; COMMIT}] \
    [execsql {SELECT * FROM def; COMMIT} db2]
} {1 2 3 4 5 6 7 8 9 10 11 12}

db2 close

# views.
#
# $Id: select7.test,v 1.11 2007/09/12 17:01:45 danielk1977 Exp $


set testdir [file dirname $argv0]
source $testdir/tester.tcl
set testprefix select7

ifcapable compound {

# A 3-way INTERSECT.  Ticket #875
ifcapable tempdb {
  do_test select7-1.1 {
    execsql {

do_test select7-7.7 {
  execsql {
    CREATE TABLE t5(a TEXT, b INT);
    INSERT INTO t5 VALUES(123, 456);
    SELECT typeof(a), a FROM t5 GROUP BY a HAVING a<b;
  }
} {text 123}

do_execsql_test 8.0 { 
  CREATE TABLE t01(x, y);
  CREATE TABLE t02(x, y);
}

do_catchsql_test 8.1 {
  SELECT * FROM (
    SELECT * FROM t01 UNION SELECT x FROM t02
  ) WHERE y=1
} {1 {SELECTs to the left and right of UNION do not have the same number of result columns}}

do_catchsql_test 8.2 {
  CREATE VIEW v0 as SELECT x, y FROM t01 UNION SELECT x FROM t02;
  EXPLAIN QUERY PLAN SELECT * FROM v0 WHERE x='0' OR y;
} {1 {SELECTs to the left and right of UNION do not have the same number of result columns}}


finish_test

#include <assert.h>
#include <stdio.h>
#include <stdlib.h>
#include <stdarg.h>
#include <string.h>
#include <ctype.h>

#if SQLITE_VERSION_NUMBER<3005000
# define sqlite3_int64 sqlite_int64
#endif
#ifdef SQLITE_ENABLE_OTA
# include "sqlite3ota.h"
#endif

/* All global state is held in this structure */
static struct Global {
  sqlite3 *db;               /* The open database connection */

  }
  if( v>0x7fffffff ) fatal_error("parameter too large - max 2147483648");
  return (int)(isNeg? -v : v);
}

/* Return the current wall-clock time, in milliseconds */
sqlite3_int64 speedtest1_timestamp(void){
#if SQLITE_VERSION_NUMBER<3005000
  return 0;
#else
  static sqlite3_vfs *clockVfs = 0;
  sqlite3_int64 t;
  if( clockVfs==0 ) clockVfs = sqlite3_vfs_find(0);
#if SQLITE_VERSION_NUMBER>=3007000
  if( clockVfs->iVersion>=2 && clockVfs->xCurrentTimeInt64!=0 ){
    clockVfs->xCurrentTimeInt64(clockVfs, &t);
  }else
#endif
  {
    double r;
    clockVfs->xCurrentTime(clockVfs, &r);
    t = (sqlite3_int64)(r*86400000.0);
  }
  return t;
#endif
}

/* Return a pseudo-random unsigned integer */
unsigned int speedtest1_random(void){
  g.x = (g.x>>1) ^ ((1+~(g.x&1)) & 0xd0000001);
  g.y = g.y*1103515245 + 12345;
  return g.x ^ g.y;

/* Print an SQL statement to standard output */
static void printSql(const char *zSql){
  int n = (int)strlen(zSql);
  while( n>0 && (zSql[n-1]==';' || isspace(zSql[n-1])) ){ n--; }
  if( g.bExplain ) printf("EXPLAIN ");
  printf("%.*s;\n", n, zSql);
  if( g.bExplain
#if SQLITE_VERSION_NUMBER>=3007017 
   && ( sqlite3_strglob("CREATE *", zSql)==0
     || sqlite3_strglob("DROP *", zSql)==0
     || sqlite3_strglob("ALTER *", zSql)==0
      )
#endif
  ){
    printf("%.*s;\n", n, zSql);

      if( g.nResult+len<sizeof(g.zResult)-2 ){
        if( g.nResult>0 ) g.zResult[g.nResult++] = ' ';
        memcpy(g.zResult + g.nResult, z, len+1);
        g.nResult += len;
      }
    }
  }
#if SQLITE_VERSION_NUMBER>=3006001
  if( g.bReprepare ){
    sqlite3_stmt *pNew;
    sqlite3_prepare_v2(g.db, sqlite3_sql(g.pStmt), -1, &pNew, 0);
    sqlite3_finalize(g.pStmt);
    g.pStmt = pNew;
  }else
#endif
  {
    sqlite3_reset(g.pStmt);
  }
}

/* The sqlite3_trace() callback function */
static void traceCallback(void *NotUsed, const char *zSql){
  int n = (int)strlen(zSql);

    }
  }
#if 0
  if( zDbName==0 ){
    fatal_error(zHelp, argv[0]);
  }
#endif
#if SQLITE_VERSION_NUMBER>=3006001
  if( nHeap>0 ){
    pHeap = malloc( nHeap );
    if( pHeap==0 ) fatal_error("cannot allocate %d-byte heap\n", nHeap);
    rc = sqlite3_config(SQLITE_CONFIG_HEAP, pHeap, nHeap, mnHeap);
    if( rc ) fatal_error("heap configuration failed: %d\n", rc);
  }
  if( nPCache>0 && szPCache>0 ){

                                 nScratch*(sqlite3_int64)szScratch);
    rc = sqlite3_config(SQLITE_CONFIG_SCRATCH, pScratch, szScratch, nScratch);
    if( rc ) fatal_error("scratch configuration failed: %d\n", rc);
  }
  if( nLook>0 ){
    sqlite3_config(SQLITE_CONFIG_LOOKASIDE, 0, 0);
  }
#endif
 
  /* Open the database and the input file */
  if( sqlite3_open(zDbName, &g.db) ){
    fatal_error("Cannot open database file: %s\n", zDbName);
  }
#if SQLITE_VERSION_NUMBER>=3006001
  if( nLook>0 && szLook>0 ){
    pLook = malloc( nLook*szLook );
    rc = sqlite3_db_config(g.db, SQLITE_DBCONFIG_LOOKASIDE, pLook, szLook,nLook);
    if( rc ) fatal_error("lookaside configuration failed: %d\n", rc);
  }
#endif

  /* Set database connection options */
  sqlite3_create_function(g.db, "random", 0, SQLITE_UTF8, 0, randomFunc, 0, 0);
  if( doTrace ) sqlite3_trace(g.db, traceCallback, 0);
  speedtest1_exec("PRAGMA threads=%d", nThread);
  if( zKey ){
    speedtest1_exec("PRAGMA key('%s')", zKey);

    sqlite3_db_status(g.db, SQLITE_DBSTATUS_STMT_USED, &iCur, &iHi, 0);
    printf("-- Statement Heap Usage:        %d bytes\n", iCur); 
  }
#endif

  sqlite3_close(g.db);

#if SQLITE_VERSION_NUMBER>=3006001
  /* Global memory usage statistics printed after the database connection
  ** has closed.  Memory usage should be zero at this point. */
  if( showStats ){
    sqlite3_status(SQLITE_STATUS_MEMORY_USED, &iCur, &iHi, 0);
    printf("-- Memory Used (bytes):         %d (max %d)\n", iCur,iHi);
#if SQLITE_VERSION_NUMBER>=3007000
    sqlite3_status(SQLITE_STATUS_MALLOC_COUNT, &iCur, &iHi, 0);
    printf("-- Outstanding Allocations:     %d (max %d)\n", iCur,iHi);
#endif
    sqlite3_status(SQLITE_STATUS_PAGECACHE_OVERFLOW, &iCur, &iHi, 0);
    printf("-- Pcache Overflow Bytes:       %d (max %d)\n", iCur,iHi);
    sqlite3_status(SQLITE_STATUS_SCRATCH_OVERFLOW, &iCur, &iHi, 0);
    printf("-- Scratch Overflow Bytes:      %d (max %d)\n", iCur,iHi);
    sqlite3_status(SQLITE_STATUS_MALLOC_SIZE, &iCur, &iHi, 0);
    printf("-- Largest Allocation:          %d bytes\n",iHi);
    sqlite3_status(SQLITE_STATUS_PAGECACHE_SIZE, &iCur, &iHi, 0);
    printf("-- Largest Pcache Allocation:   %d bytes\n",iHi);
    sqlite3_status(SQLITE_STATUS_SCRATCH_SIZE, &iCur, &iHi, 0);
    printf("-- Largest Scratch Allocation:  %d bytes\n", iHi);
  }
#endif

  /* Release memory */
  free( pLook );
  free( pPCache );
  free( pScratch );
  free( pHeap );
  return 0;
}

  do_tracesql_test 6.2.3 {
    SELECT word, distance FROM t3 WHERE rowid = 10 AND word MATCH 'kiiner';
  } {keener 300
    {SELECT id, word, rank, k1  FROM "main"."t3_vocab" WHERE langid=0 AND k2>=?1 AND k2<?2}
  }
}

#------------------------------------------------------------------------- 
# Test that the spellfix1 table supports conflict handling (OR REPLACE 
# and so on).
#
do_execsql_test 7.1 {
  CREATE VIRTUAL TABLE t4 USING spellfix1;
  PRAGMA table_info = t4;
} {
  0 word {} 0 {} 0 
  1 rank {} 0 {} 0 
  2 distance {} 0 {} 0 
  3 langid {} 0 {} 0 
  4 score {} 0 {} 0 
  5 matchlen {} 0 {} 0
}

do_execsql_test 7.2.1 {
  INSERT INTO t4(rowid, word) VALUES(1, 'Archilles');
  INSERT INTO t4(rowid, word) VALUES(2, 'Pluto');
  INSERT INTO t4(rowid, word) VALUES(3, 'Atrides');
  INSERT OR REPLACE INTO t4(rowid, word) VALUES(2, 'Apollo');
  SELECT rowid, word FROM t4;
} {
  1 Archilles   2 Apollo   3 Atrides
}
do_catchsql_test 7.2.2 {
  INSERT OR ABORT INTO t4(rowid, word) VALUES(1, 'Leto');
} {1 {constraint failed}}
do_catchsql_test 7.2.3 {
  INSERT OR ROLLBACK INTO t4(rowid, word) VALUES(3, 'Zeus');
} {1 {constraint failed}}
do_catchsql_test 7.2.4 {
  INSERT OR FAIL INTO t4(rowid, word) VALUES(3, 'Zeus');
} {1 {constraint failed}}
do_execsql_test 7.2.5 {
  INSERT OR IGNORE INTO t4(rowid, word) VALUES(3, 'Zeus');
  SELECT rowid, word FROM t4;
} {
  1 Archilles   2 Apollo   3 Atrides
}

do_execsql_test 7.3.1 {
  UPDATE OR REPLACE t4 SET rowid=3 WHERE rowid=1;
  SELECT rowid, word FROM t4;
} {2 Apollo 3 Archilles}
do_catchsql_test 7.3.2 {
  UPDATE OR ABORT t4 SET rowid=3 WHERE rowid=2;
} {1 {constraint failed}}
do_catchsql_test 7.3.3 {
  UPDATE OR ROLLBACK t4 SET rowid=3 WHERE rowid=2;
} {1 {constraint failed}}
do_catchsql_test 7.3.4 {
  UPDATE OR FAIL t4 SET rowid=3 WHERE rowid=2;
} {1 {constraint failed}}
do_execsql_test 7.3.5 {
  UPDATE OR IGNORE t4 SET rowid=3 WHERE rowid=2;
  SELECT rowid, word FROM t4;
} {2 Apollo  3 Archilles}

do_execsql_test 7.4.1 {
  DELETE FROM t4;
  INSERT INTO t4(rowid, word) VALUES(10, 'Agamemnon');
  INSERT INTO t4(rowid, word) VALUES(20, 'Patroclus');
  INSERT INTO t4(rowid, word) VALUES(30, 'Chryses');

  CREATE TABLE t5(i, w);
  INSERT INTO t5 VALUES(5,  'Poseidon');
  INSERT INTO t5 VALUES(20, 'Chronos');
  INSERT INTO t5 VALUES(30, 'Hera');
}

db_save_and_close
foreach {tn conflict err bRollback res} {
  0 ""            {1 {constraint failed}} 0
                  {10 Agamemnon 20 Patroclus 30 Chryses}
  1 "OR REPLACE"  {0 {}} 0
                  {5 Poseidon 10 Agamemnon 20 Chronos 30 Hera}
  2 "OR ABORT"    {1 {constraint failed}} 0
                  {10 Agamemnon 20 Patroclus 30 Chryses}
  3 "OR ROLLBACK" {1 {constraint failed}} 1
                  {10 Agamemnon 20 Patroclus 30 Chryses}
  5 "OR IGNORE"   {0 {}} 0
                  {5 Poseidon 10 Agamemnon 20 Patroclus 30 Chryses}
} {
  db_restore_and_reopen
  load_static_extension db spellfix nextchar

  execsql BEGIN
  set sql "INSERT $conflict INTO t4(rowid, word) SELECT i, w FROM t5"
  do_catchsql_test 7.4.2.$tn.1 $sql $err
  do_execsql_test 7.4.2.$tn.2 { SELECT rowid, word FROM t4 } $res

  do_test 7.4.2.$tn.3 { sqlite3_get_autocommit db } $bRollback
  catchsql ROLLBACK
}

foreach {tn conflict err bRollback res} {
  0 ""            {1 {constraint failed}} 0
                  {10 Agamemnon 20 Patroclus 30 Chryses}
  1 "OR REPLACE"  {0 {}} 0
                  {15 Agamemnon 45 Chryses}
  2 "OR ABORT"    {1 {constraint failed}} 0
                  {10 Agamemnon 20 Patroclus 30 Chryses}
  3 "OR ROLLBACK" {1 {constraint failed}} 1
                  {10 Agamemnon 20 Patroclus 30 Chryses}
  5 "OR IGNORE"   {0 {}} 0
                  {15 Agamemnon 20 Patroclus 45 Chryses}
} {
  db_restore_and_reopen
  load_static_extension db spellfix nextchar

  execsql BEGIN
  set sql "UPDATE $conflict t4 SET rowid=rowid + (rowid/2)"
  do_catchsql_test 7.5.2.$tn.1 $sql $err
  do_execsql_test 7.5.2.$tn.2 { SELECT rowid, word FROM t4 } $res
  do_test 7.5.2.$tn.3 { sqlite3_get_autocommit db } $bRollback
  catchsql ROLLBACK
}

finish_test

} {0 0 0 {SEARCH TABLE t1 USING INDEX i1 (a=?)}}
do_eqp_test 5.3.2 {
  SELECT * FROM t1 WHERE likelihood(a=?, 0.9)
} {0 0 0 {SCAN TABLE t1}}
do_eqp_test 5.3.3 {
  SELECT * FROM t1 WHERE likely(a=?)
} {0 0 0 {SCAN TABLE t1}}

# 2015-06-18
# Ticket [https://www.sqlite.org/see/tktview/472f0742a1868fb58862bc588ed70]
#
do_execsql_test 6.0 {
  DROP TABLE IF EXISTS t1;
  CREATE TABLE t1(i int, x, y, z);
  INSERT INTO t1 VALUES (1,1,1,1), (2,2,2,2), (3,3,3,3), (4,4,4,4);
  DROP TABLE IF EXISTS t2;
  CREATE TABLE t2(i int, bool char);
  INSERT INTO t2 VALUES(1,'T'), (2,'F');
  SELECT count(*) FROM t1 LEFT JOIN t2 ON t1.i=t2.i AND bool='T';
  SELECT count(*) FROM t1 LEFT JOIN t2 ON likely(t1.i=t2.i) AND bool='T';
} {4 4}

# 2015-06-20
# Crash discovered by AFL
#
do_execsql_test 7.0 {
  DROP TABLE IF EXISTS t1;
  CREATE TABLE t1(a, b, PRIMARY KEY(a,b));
  INSERT INTO t1 VALUES(9,1),(1,2);
  DROP TABLE IF EXISTS t2;
  CREATE TABLE t2(x, y, PRIMARY KEY(x,y));
  INSERT INTO t2 VALUES(3,3),(4,4);
  SELECT likely(a), x FROM t1, t2 ORDER BY 1, 2;
} {1 3 1 4 9 3 9 4}
do_execsql_test 7.1 {
  SELECT unlikely(a), x FROM t1, t2 ORDER BY 1, 2;
} {1 3 1 4 9 3 9 4}
do_execsql_test 7.2 {
  SELECT likelihood(a,0.5), x FROM t1, t2 ORDER BY 1, 2;
} {1 3 1 4 9 3 9 4}
do_execsql_test 7.3 {
  SELECT coalesce(a,a), x FROM t1, t2 ORDER BY 1, 2;
} {1 3 1 4 9 3 9 4}


finish_test