SQLite

# Databases containing fuzzer test cases
#
FUZZDATA = \
  $(TOP)/test/fuzzdata1.db \
  $(TOP)/test/fuzzdata2.db \
  $(TOP)/test/fuzzdata3.db

# Standard options to testfixture
#
TESTOPTS = --verbose=file --output=test-out.txt

# This is the default Makefile target.  The objects listed here
# are what get build when you type just "make" with no arguments.
#
all:	sqlite3.h libsqlite3.la sqlite3$(TEXE) $(HAVE_TCL:1=libtclsqlite3.la)

Makefile: $(TOP)/Makefile.in
	./config.status

testfixture$(TEXE):	$(TESTFIXTURE_SRC)
	$(LTLINK) -DSQLITE_NO_SYNC=1 $(TEMP_STORE) $(TESTFIXTURE_FLAGS) \
		-o $@ $(TESTFIXTURE_SRC) $(LIBTCL) $(TLIBS)

# A very detailed test running most or all test cases
fulltest:	$(TESTPROGS) fuzztest
	./testfixture$(TEXE) $(TOP)/test/all.test $(TESTOPTS)

# Really really long testing
soaktest:	$(TESTPROGS)
	./testfixture$(TEXE) $(TOP)/test/all.test -soak=1 $(TESTOPTS)

# Do extra testing but not everything.
fulltestonly:	$(TESTPROGS)
	./testfixture$(TEXE) $(TOP)/test/full.test

# Fuzz testing
fuzztest:	fuzzcheck$(TEXE) $(FUZZDATA)
	./fuzzcheck$(TEXE) $(FUZZDATA)

valgrindfuzz:	fuzzcheck$(TEXT) $(FUZZDATA)
	valgrind ./fuzzcheck$(TEXE) --cell-size-check --quiet $(FUZZDATA)

# Minimal testing that runs in less than 3 minutes
#
quicktest:	./testfixture$(TEXE)
	./testfixture$(TEXE) $(TOP)/test/extraquick.test $(TESTOPTS)

# This is the common case.  Run many tests that do not take too long,

# including fuzzcheck, sqlite3_analyzer, and sqldiff tests.
#
test:	$(TESTPROGS) fuzztest
	./testfixture$(TEXE) $(TOP)/test/veryquick.test $(TESTOPTS)

# Run a test using valgrind.  This can take a really long time
# because valgrind is so much slower than a native machine.
#
valgrindtest:	$(TESTPROGS) valgrindfuzz
	OMIT_MISUSE=1 valgrind -v ./testfixture$(TEXE) $(TOP)/test/permutations.test valgrind $(TESTOPTS)

# A very fast test that checks basic sanity.  The name comes from
# the 60s-era electronics testing:  "Turn it on and see if smoke
# comes out."
#
smoketest:	$(TESTPROGS) fuzzcheck$(TEXE)
	./testfixture$(TEXE) $(TOP)/test/main.test $(TESTOPTS)

sqlite3_analyzer.c: sqlite3.c $(TOP)/src/tclsqlite.c $(TOP)/tool/spaceanal.tcl
	echo "#define TCLSH 2" > $@
	echo "#define SQLITE_ENABLE_DBSTAT_VTAB 1" >> $@
	cat sqlite3.c $(TOP)/src/tclsqlite.c >> $@
	echo "static const char *tclsh_main_loop(void){" >> $@
	echo "static const char *zMainloop = " >> $@

# Databases containing fuzzer test cases
#
FUZZDATA = \
  $(TOP)\test\fuzzdata1.db \
  $(TOP)\test\fuzzdata2.db \
  $(TOP)\test\fuzzdata3.db

# Standard options to testfixture
#
TESTOPTS = --verbose=file --output=test-out.txt

# This is the default Makefile target.  The objects listed here
# are what get build when you type just "make" with no arguments.
#
all:	dll libsqlite3.lib sqlite3.exe libtclsqlite3.lib

libsqlite3.lib:	$(LIBOBJ)

testfixture.exe:	$(TESTFIXTURE_SRC) $(LIBRESOBJS) $(HDR)
	$(LTLINK) -DSQLITE_NO_SYNC=1 $(TESTFIXTURE_FLAGS) \
		-DBUILD_sqlite -I$(TCLINCDIR) \
		$(TESTFIXTURE_SRC) \
		/link $(LTLINKOPTS) $(LTLIBPATHS) $(LIBRESOBJS) $(LTLIBS) $(TLIBS)

extensiontest: testfixture.exe testloadext.dll
	.\testfixture.exe $(TOP)\test\loadext.test $(TESTOPTS)

fulltest:	$(TESTPROGS) fuzztest
	.\testfixture.exe $(TOP)\test\all.test $(TESTOPTS)

soaktest:	$(TESTPROGS)
	.\testfixture.exe $(TOP)\test\all.test -soak=1 $(TESTOPTS)

fulltestonly:	$(TESTPROGS) fuzztest
	.\testfixture.exe $(TOP)\test\full.test

queryplantest:	testfixture.exe sqlite3.exe
	.\testfixture.exe $(TOP)\test\permutations.test queryplanner $(TESTOPTS)

fuzztest:	fuzzcheck.exe
	.\fuzzcheck.exe $(FUZZDATA)

# Minimal testing that runs in less than 3 minutes (on a fast machine)
#
quicktest:	.\testfixture.exe
	.\testfixture.exe $(TOP)\test\extraquick.test $(TESTOPTS)

# This is the common case.  Run many tests that do not take too long,
# including fuzzcheck, sqlite3_analyzer, and sqldiff tests.
#
test:	$(TESTPROGS) fuzztest
	.\testfixture.exe $(TOP)\test\veryquick.test $(TESTOPTS)

smoketest:	$(TESTPROGS)
	.\testfixture.exe $(TOP)\test\main.test $(TESTOPTS)

sqlite3_analyzer.c: $(SQLITE3C) $(TOP)\src\tclsqlite.c $(TOP)\tool\spaceanal.tcl
	echo #define TCLSH 2 > $@
	echo #define SQLITE_ENABLE_DBSTAT_VTAB 1 >> $@
	copy $@ + $(SQLITE3C) + $(TOP)\src\tclsqlite.c $@
	echo static const char *tclsh_main_loop(void){ >> $@
	echo static const char *zMainloop = >> $@

# Databases containing fuzzer test cases
#
FUZZDATA = \
  $(TOP)/test/fuzzdata1.db \
  $(TOP)/test/fuzzdata2.db \
  $(TOP)/test/fuzzdata3.db

# Standard options to testfixture
#
TESTOPTS = --verbose=file --output=test-out.txt

# This is the default Makefile target.  The objects listed here
# are what get build when you type just "make" with no arguments.
#
all:	sqlite3.h libsqlite3.a sqlite3$(EXE)

libsqlite3.a:	$(LIBOBJ)
	$(AR) libsqlite3.a $(LIBOBJ)

fts3-testfixture$(EXE): sqlite3.c fts3amal.c $(TESTSRC) $(TOP)/src/tclsqlite.c
	$(TCCX) $(TCL_FLAGS) -DTCLSH=1 $(TESTFIXTURE_FLAGS)                  \
	-DSQLITE_ENABLE_FTS3=1                                               \
		$(TESTSRC) $(TOP)/src/tclsqlite.c sqlite3.c fts3amal.c       \
		-o testfixture$(EXE) $(LIBTCL) $(THREADLIB)

fulltest:	$(TESTPROGS) fuzztest
	./testfixture$(EXE) $(TOP)/test/all.test $(TESTOPTS)

soaktest:	$(TESTPROGS)
	./testfixture$(EXE) $(TOP)/test/all.test -soak=1 $(TESTOPTS)

fulltestonly:	$(TESTPROGS) fuzztest
	./testfixture$(EXE) $(TOP)/test/full.test $(TESTOPTS)

queryplantest:	testfixture$(EXE) sqlite3$(EXE)
	./testfixture$(EXE) $(TOP)/test/permutations.test queryplanner $(TESTOPTS)

fuzztest:	fuzzcheck$(EXE) $(FUZZDATA)
	./fuzzcheck$(EXE) $(FUZZDATA)

valgrindfuzz:	fuzzcheck$(EXE) $(FUZZDATA)
	valgrind ./fuzzcheck$(EXE) --cell-size-check --quiet $(FUZZDATA)

# A very quick test using only testfixture and omitting all the slower
# tests.  Designed to run in under 3 minutes on a workstation.
#
quicktest:	./testfixture$(EXE)
	./testfixture$(EXE) $(TOP)/test/extraquick.test $(TESTOPTS)

# The default test case.  Runs most of the faster standard TCL tests,
# and fuzz tests, and sqlite3_analyzer and sqldiff tests.
#
test:	$(TESTPROGS) fuzztest
	./testfixture$(EXE) $(TOP)/test/veryquick.test $(TESTOPTS)

# Run a test using valgrind.  This can take a really long time
# because valgrind is so much slower than a native machine.
#
valgrindtest:	$(TESTPROGS) valgrindfuzz
	OMIT_MISUSE=1 valgrind -v \
	./testfixture$(EXE) $(TOP)/test/permutations.test valgrind $(TESTOPTS)

# A very fast test that checks basic sanity.  The name comes from
# the 60s-era electronics testing:  "Turn it on and see if smoke
# comes out."
#
smoketest:	$(TESTPROGS) fuzzcheck$(EXE)
	./testfixture$(EXE) $(TOP)/test/main.test $(TESTOPTS)

# The next two rules are used to support the "threadtest" target. Building
# threadtest runs a few thread-safety tests that are implemented in C. This
# target is invoked by the releasetest.tcl script.
# 
THREADTEST3_SRC = $(TOP)/test/threadtest3.c    \
                  $(TOP)/test/tt3_checkpoint.c \

  return
}

if {$tcl_platform(platform)=="windows"} {
  set PROG "sqlite3_analyzer.exe"
} else {
  set PROG "./sqlite3_analyzer"
}
if {![file exe $PROG]} {
  puts "analyzer1 cannot run because $PROG is not available"
  finish_test
  return
}
db close
forcedelete test.db test.db-journal test.db-wal
sqlite3 db test.db

do_test analyzer1-1.0 {
  db eval {

#
#    May you do good and not evil.
#    May you find forgiveness for yourself and forgive others.
#    May you share freely, never taking more than you give.
#
#***********************************************************************
# This file runs most of the tests run by veryquick.test except for those
# that take a long time.
#

set testdir [file dirname $argv0]
source $testdir/permutations.test

run_test_suite extraquick

finish_test

if {$::tcl_platform(platform)!="unix"} {
  set alltests [test_set $alltests -exclude crash.test crash2.test]
}
set alltests [test_set $alltests -exclude {
  all.test        async.test         quick.test  veryquick.test
  memleak.test    permutations.test  soak.test   fts3.test
  mallocAll.test  rtree.test         full.test   extraquick.test
}]

set allquicktests [test_set $alltests -exclude {
  async2.test async3.test backup_ioerr.test corrupt.test
  corruptC.test crash.test crash2.test crash3.test crash4.test crash5.test
  crash6.test crash7.test delete3.test e_fts3.test fts3rnd.test
  fkey_malloc.test fuzz.test fuzz3.test fuzz_malloc.test in2.test loadext.test

#   veryquick
#   quick
#   full
#
lappend ::testsuitelist xxx

test_suite "veryquick" -prefix "" -description {
  "Very" quick test suite. Runs in minutes on a workstation.
  This test suite is the same as the "quick" tests, except that some files
  that test malloc and IO errors are omitted.
} -files [
  test_set $allquicktests -exclude *malloc* *ioerr* *fault* *bigfile*
]

test_suite "extraquick" -prefix "" -description {
  "Extra" quick test suite. Runs in a few minutes on a workstation.
  This test suite is the same as the "veryquick" tests, except that
  slower tests are omitted.
} -files [
  test_set $allquicktests -exclude *malloc* *ioerr* *fault* *bigfile* \
     wal3.test fts4merge* sort2.test mmap1.test walcrash* \
     percentile.test where8m.test walcksum.test savepoint3.test \
     fuzzer1.test fuzzer3.test fts3expr3.test
]

test_suite "mmap" -prefix "mm-" -description {
  Similar to veryquick. Except with memory mapping enabled.
} -presql {
  pragma mmap_size = 268435456;
} -files [

      }

      -info {
        puts "Command-line Options:"
        puts "   --srcdir $::SRCDIR"
        puts "   --platform [list $platform]"
        puts "   --config [list $config]"
        if {$::QUICK} {
          if {$::QUICK==1} {puts "   --quick"}
          if {$::QUICK==2} {puts "   --veryquick"}
        }
        if {$::MSVC}      {puts "   --msvc"}
        if {$::BUILDONLY} {puts "   --buildonly"}
        if {$::DRYRUN}    {puts "   --dryrun"}
        if {$::TRACE}     {puts "   --trace"}
        puts "\nAvailable --platform options:"
        foreach y [lsort [array names ::Platforms]] {
          puts "   [list $y]"

    if {$::MSVC && ($zConfig eq "Sanitize" || "checksymbols" in $target
           || "valgrindtest" in $target)} {
      puts "Skipping $zConfig / $target for MSVC..."
      continue
    }
    if {$target ne "checksymbols"} {
      switch -- $::QUICK {
         1 {set target quicktest}
         2 {set target smoketest}
      }
      if {$::BUILDONLY} {
        set target testfixture
        if {$::MSVC} {append target .exe}
      }
    }

set testdir [file dirname $argv0]
source $testdir/tester.tcl

if {$tcl_platform(platform)=="windows"} {
  set PROG "sqldiff.exe"
} else {
  set PROG "./sqldiff"
}
if {![file exe $PROG]} {
  puts "sqldiff cannot run because $PROG is not available"
  finish_test
  return
}
db close
forcedelete test.db test2.db
sqlite3 db test.db

do_test sqldiff-1.0 {
  db eval {