SQLite

** column.
*/
void sqlite3AddGenerated(Parse *pParse, Expr *pExpr, Token *pType){
#ifndef SQLITE_OMIT_GENERATED_COLUMNS
  u8 eType = COLFLAG_VIRTUAL;
  Table *pTab = pParse->pNewTable;
  Column *pCol;
  if( NEVER(pTab==0) ) goto generated_done;
  pCol = &(pTab->aCol[pTab->nCol-1]);
  if( IN_DECLARE_VTAB ){
    sqlite3ErrorMsg(pParse, "virtual tables cannot use computed columns");
    goto generated_done;
  }
  if( pCol->pDflt ) goto generated_error;
  if( pType ){

  /* If there is no IDLIST term but the table has an integer primary
  ** key, the set the ipkColumn variable to the integer primary key 
  ** column index in the original table definition.
  */
  if( pColumn==0 && nColumn>0 ){
    ipkColumn = pTab->iPKey;
#ifndef SQLITE_OMIT_GENERATED_COLUMNS
    if( ipkColumn>=0 && (pTab->tabFlags & TF_HasGenerated)!=0 ){
      testcase( pTab->tabFlags & TF_HasVirtual );
      testcase( pTab->tabFlags & TF_HasStored );
      for(i=ipkColumn-1; i>=0; i--){
        if( pTab->aCol[i].colFlags & COLFLAG_GENERATED ){
          testcase( pTab->aCol[i].colFlags & COLFLAG_VIRTUAL );
          testcase( pTab->aCol[i].colFlags & COLFLAG_STORED );
          ipkColumn--;
        }
      }
    }
#endif
  }

#ifdef SQLITE_ENABLE_HIDDEN_COLUMNS
    if( (db->mDbFlags & DBFLAG_Vacuum)==0 
     && (pDestCol->colFlags | pSrcCol->colFlags) & COLFLAG_HIDDEN 
    ){
      return 0;    /* Neither table may have __hidden__ columns */
    }
#endif
#ifndef SQLITE_OMIT_GENERATED_COLUMNS
    /* Even if tables t1 and t2 have identical schemas, if they contain
    ** generated columns, then this statement is semantically incorrect:
    **
    **     INSERT INTO t2 SELECT * FROM t1;
    **
    ** The reason is that generated column values are returned by the
    ** the SELECT statement on the right but the INSERT statement on the
    ** left wants them to be omitted.
    **
    ** Nevertheless, this is a useful notational shorthand to tell SQLite
    ** to do a bulk transfer all of the content from t1 over to t2.
    ** 
    ** We could, in theory, disable this (except for internal use by the
    ** VACUUM command where it is actually needed).  But why do that?  It
    ** seems harmless enough, and provides a useful service.
    */
    if( (pDestCol->colFlags & COLFLAG_GENERATED) !=
        (pSrcCol->colFlags & COLFLAG_GENERATED) ){
      return 0;    /* Both columns have the same generated-column type */
    }
    /* But the transfer is only allowed if both the source and destination
    ** tables have the exact same expressions for generated columns.
    ** This requirement could be relaxed for VIRTUAL columns, I suppose.
    */
    if( (pDestCol->colFlags & COLFLAG_GENERATED)!=0 ){
      if( sqlite3ExprCompare(0, pSrcCol->pDflt, pDestCol->pDflt, -1)!=0 ){
        testcase( pDestCol->colFlags & COLFLAG_VIRTUAL );
        testcase( pDestCol->colFlags & COLFLAG_STORED );
        return 0;  /* Different generator expressions */
      }
    }
#endif
    if( pDestCol->affinity!=pSrcCol->affinity ){
      return 0;    /* Affinity must be the same on all columns */
    }
    if( sqlite3_stricmp(pDestCol->zColl, pSrcCol->zColl)!=0 ){
      return 0;    /* Collating sequence must be the same on all columns */
    }
    if( pDestCol->notNull && !pSrcCol->notNull ){
      return 0;    /* tab2 must be NOT NULL if tab1 is */
    }
    /* Default values for second and subsequent columns need to match. */
    if( (pDestCol->colFlags & COLFLAG_GENERATED)==0 && i>0 ){
      assert( pDestCol->pDflt==0 || pDestCol->pDflt->op==TK_SPAN );
      assert( pSrcCol->pDflt==0 || pSrcCol->pDflt->op==TK_SPAN );
      if( (pDestCol->pDflt==0)!=(pSrcCol->pDflt==0) 
       || (pDestCol->pDflt && strcmp(pDestCol->pDflt->u.zToken,
                                       pSrcCol->pDflt->u.zToken)!=0)
      ){
        return 0;    /* Default values must be the same for all columns */
      }
    }








  }
  for(pDestIdx=pDest->pIndex; pDestIdx; pDestIdx=pDestIdx->pNext){
    if( IsUniqueIndex(pDestIdx) ){
      destHasUniqueIdx = 1;
    }
    for(pSrcIdx=pSrc->pIndex; pSrcIdx; pSrcIdx=pSrcIdx->pNext){
      if( xferCompatibleIndex(pDestIdx, pSrcIdx) ) break;

  if( (pNC->ncFlags & validMask)!=0 ){
    const char *zIn = "partial index WHERE clauses";
    if( pNC->ncFlags & NC_IdxExpr )      zIn = "index expressions";
#ifndef SQLITE_OMIT_CHECK
    else if( pNC->ncFlags & NC_IsCheck ) zIn = "CHECK constraints";
#endif
#ifndef SQLITE_OMIT_GENERATED_COLUMNS
    else if( pNC->ncFlags & NC_GenCol ) zIn = "generated columns";
#endif
    sqlite3ErrorMsg(pParse, "%s prohibited in %s", zMsg, zIn);
  }
}

/*
** Expression p should encode a floating point value between 1.0 and 0.0.

          chngRowid = 1;
          pRowidExpr = pChanges->a[i].pExpr;
        }else if( pPk && (pTab->aCol[j].colFlags & COLFLAG_PRIMKEY)!=0 ){
          chngPk = 1;
        }
#ifndef SQLITE_OMIT_GENERATED_COLUMNS
        else if( pTab->aCol[j].colFlags & COLFLAG_GENERATED ){
          testcase( pTab->aCol[j].colFlags & COLFLAG_VIRTUAL );
          testcase( pTab->aCol[j].colFlags & COLFLAG_STORED );
          sqlite3ErrorMsg(pParse, 
             "cannot UPDATE generated column \"%s\"",
             pTab->aCol[j].zName);
          goto update_cleanup;
        }
#endif
        aXRef[j] = i;

    }
    if( sqlite3VdbeHalt(p)==SQLITE_BUSY ){
      p->pc = (int)(pOp - aOp);
      db->autoCommit = (u8)(1-desiredAutoCommit);
      p->rc = rc = SQLITE_BUSY;
      goto vdbe_return;
    }

    sqlite3CloseSavepoints(db);
    if( p->rc==SQLITE_OK ){
      rc = SQLITE_DONE;
    }else{
      rc = SQLITE_ERROR;
    }
    goto vdbe_return;