SQLite

#include "sqliteInt.h"

/* Size of the Bitvec structure in bytes. */
#define BITVEC_SZ        512

/* Round the union size down to the nearest pointer boundary, since that's how 
** it will be aligned within the Bitvec struct. */
#define BITVEC_USIZE \
    (((BITVEC_SZ-(3*sizeof(u32)))/sizeof(Bitvec*))*sizeof(Bitvec*))

/* Type of the array "element" for the bitmap representation. 
** Should be a power of 2, and ideally, evenly divide into BITVEC_USIZE. 
** Setting this to the "natural word" size of your CPU may improve
** performance. */
#define BITVEC_TELEM     u8
/* Size, in bits, of the bitmap element. */

  */
  if( !ExprHasProperty(pExpr, EP_VarSelect) ){
    jmpIfDynamic = sqlite3CodeOnce(pParse); VdbeCoverage(v);
  }

#ifndef SQLITE_OMIT_EXPLAIN
  if( pParse->explain==2 ){
    char *zMsg = sqlite3MPrintf(pParse->db, "EXECUTE %s%s SUBQUERY %d",
        jmpIfDynamic>=0?"":"CORRELATED ",
        pExpr->op==TK_IN?"LIST":"SCALAR",
        pParse->iNextSelectId
    );
    sqlite3VdbeAddOp4(v, OP_Explain, pParse->iSelectId, 0, 0, zMsg, P4_DYNAMIC);
  }
#endif

  switch( pExpr->op ){
    case TK_IN: {

  ** power of two that we can represent using 32-bit signed integers.
  */
  if( nByte > 0x40000000 ){
    return 0;
  }

  /* Round nByte up to the next valid power of two */
  for(iFullSz=mem5.szAtom,iLogsize=0; iFullSz<nByte; iFullSz*=2,iLogsize++){}

  /* Make sure mem5.aiFreelist[iLogsize] contains at least one free
  ** block.  If not, then split a block of the next larger power of
  ** two in order to create a new free block of size iLogsize.
  */
  for(iBin=iLogsize; iBin<=LOGMAX && mem5.aiFreelist[iBin]<0; iBin++){}
  if( iBin>LOGMAX ){

#if SQLITE_MUTEX_NREF
  volatile int nRef;         /* Number of entrances */
  volatile pthread_t owner;  /* Thread that is within this mutex */
  int trace;                 /* True to trace changes */
#endif
};
#if SQLITE_MUTEX_NREF
#define SQLITE3_MUTEX_INITIALIZER {PTHREAD_MUTEX_INITIALIZER,0,0,(pthread_t)0,0}
#else
#define SQLITE3_MUTEX_INITIALIZER { PTHREAD_MUTEX_INITIALIZER }
#endif

/*
** The sqlite3_mutex_held() and sqlite3_mutex_notheld() routine are
** intended for use only inside assert() statements.  On some platforms,

          }
        }
      }
      start=i+1;
    }
    buf[i] = lockPath[i];
  }
  OSTRACE(("CREATELOCKPATH  proxy lock path=%s pid=%d\n",lockPath,osGetpid(0)));
  return 0;
}

/*
** Create a new VFS file descriptor (stored in memory obtained from
** sqlite3_malloc) and open the file named "path" in the file descriptor.
**

  OSTRACE(("TEST-WR-LOCK file=%p, pResOut=%p\n", pFile->h, pResOut));

  assert( id!=0 );
  if( pFile->locktype>=RESERVED_LOCK ){
    res = 1;
    OSTRACE(("TEST-WR-LOCK file=%p, result=%d (local)\n", pFile->h, res));
  }else{
    res = winLockFile(&pFile->h, SQLITE_LOCKFILEEX_FLAGS,RESERVED_BYTE,0,1,0);
    if( res ){
      winUnlockFile(&pFile->h, RESERVED_BYTE, 0, 1, 0);
    }
    res = !res;
    OSTRACE(("TEST-WR-LOCK file=%p, result=%d (remote)\n", pFile->h, res));
  }
  *pResOut = res;

    *pNum = -(i64)u;
  }else{
    *pNum = (i64)u;
  }
  testcase( i==18 );
  testcase( i==19 );
  testcase( i==20 );
  if( (c!=0 && &zNum[i]<zEnd) || (i==0 && zStart==zNum)
       || i>19*incr || nonNum ){
    /* zNum is empty or contains non-numeric text or is longer
    ** than 19 digits (thus guaranteeing that it is too large) */
    return 1;
  }else if( i<19*incr ){
    /* Less than 19 digits, so we know that it fits in 64 bits */
    assert( u<=LARGEST_INT64 );
    return 0;

  p++;
  a = a<<14;
  a |= *p;
  /* a: p0<<28 | p2<<14 | p4 (unmasked) */
  if (!(a&0x80))
  {
    /* we can skip these cause they were (effectively) done above
    ** while calculating s */
    /* a &= (0x7f<<28)|(0x7f<<14)|(0x7f); */
    /* b &= (0x7f<<14)|(0x7f); */
    b = b<<7;
    a |= b;
    s = s>>18;
    *v = ((u64)s)<<32 | a;
    return 5;

  pDest = &aMem[pOp->p3];
  memAboutToChange(p, pDest);
  assert( pOp->p1>=0 && pOp->p1<p->nCursor );
  pC = p->apCsr[pOp->p1];
  assert( pC!=0 );
  assert( p2<pC->nField );
  aOffset = pC->aOffset;
  assert( pC->eCurType!=CURTYPE_VTAB );
  assert( pC->eCurType!=CURTYPE_PSEUDO || pC->nullRow );
  assert( pC->eCurType!=CURTYPE_SORTER );
  pCrsr = pC->uc.pCursor;

  /* If the cursor cache is stale, bring it up-to-date */
  rc = sqlite3VdbeCursorMoveto(pC);
  if( rc ) goto abort_due_to_error;

      assert( pOp->p4type==P4_KEYINFO );
      rc = sqlite3BtreeCreateTable(pCx->pBt, &pgno, BTREE_BLOBKEY | pOp->p5); 
      if( rc==SQLITE_OK ){
        assert( pgno==MASTER_ROOT+1 );
        assert( pKeyInfo->db==db );
        assert( pKeyInfo->enc==ENC(db) );
        pCx->pKeyInfo = pKeyInfo;
        rc = sqlite3BtreeCursor(pCx->pBt, pgno, BTREE_WRCSR,
                                pKeyInfo, pCx->uc.pCursor);
      }
      pCx->isTable = 0;
    }else{
      rc = sqlite3BtreeCursor(pCx->pBt, MASTER_ROOT, BTREE_WRCSR,
                              0, pCx->uc.pCursor);
      pCx->isTable = 1;
    }
  }
  pCx->isOrdered = (pOp->p5!=BTREE_UNORDERED);
  break;
}

  VdbeCursor *pC;

  assert( pOp->p1>=0 && pOp->p1<p->nCursor );
  assert( pOp->p4type==P4_EXPR );
  pC = p->apCsr[pOp->p1];
  if( pC ){
    assert( pC->eCurType==CURTYPE_BTREE );
    sqlite3BtreeCursorHint(pC->uc.pCursor, BTREE_HINT_RANGE,
                           pOp->p4.pExpr, aMem);
  }
  break;
}
#endif /* SQLITE_ENABLE_CURSOR_HINTS */

/* Opcode: Noop * * * * *
**

  pWC->nTerm = 0;
  pWC->nSlot = ArraySize(pWC->aStatic);
  pWC->a = pWC->aStatic;
}

/*
** Deallocate a WhereClause structure.  The WhereClause structure
** itself is not freed.  This routine is the inverse of
** sqlite3WhereClauseInit().
*/
void sqlite3WhereClauseClear(WhereClause *pWC){
  int i;
  WhereTerm *a;
  sqlite3 *db = pWC->pWInfo->pParse->db;
  for(i=pWC->nTerm-1, a=pWC->a; i>=0; i--, a++){
    if( a->wtFlags & TERM_DYNAMIC ){

  Expr *pTerm;
  if( pItem->fg.isTabFunc==0 ) return;
  pTab = pItem->pTab;
  assert( pTab!=0 );
  pArgs = pItem->u1.pFuncArg;
  if( pArgs==0 ) return;
  for(j=k=0; j<pArgs->nExpr; j++){
    while( k<pTab->nCol && (pTab->aCol[k].colFlags & COLFLAG_HIDDEN)==0 ){k++;}
    if( k>=pTab->nCol ){
      sqlite3ErrorMsg(pParse, "too many arguments on %s() - max %d",
                      pTab->zName, j);
      return;
    }
    pColRef = sqlite3PExpr(pParse, TK_COLUMN, 0, 0, 0);
    if( pColRef==0 ) return;