SQLITE_WSD struct Sqlite3Config sqlite3Config = {
   SQLITE_DEFAULT_MEMSTATUS,  /* bMemstat */
   1,                         /* bCoreMutex */
   SQLITE_THREADSAFE==1,      /* bFullMutex */
   SQLITE_USE_URI,            /* bOpenUri */
   SQLITE_ALLOW_COVERING_INDEX_SCAN,   /* bUseCis */
   0x7ffffffe,                /* mxStrlen */

   128,                       /* szLookaside */
   500,                       /* nLookaside */
   {0,0,0,0,0,0,0,0},         /* m */
   {0,0,0,0,0,0,0,0,0},       /* mutex */
   {0,0,0,0,0,0,0,0,0,0,0,0,0},/* pcache2 */
   (void*)0,                  /* pHeap */
   0,                         /* nHeap */
................................................................................
   0,                         /* pLogArg */
   0,                         /* bLocaltimeFault */
#ifdef SQLITE_ENABLE_SQLLOG
   0,                         /* xSqllog */
   0                          /* pSqllogArg */
#endif
};


/*
** Hash table for global functions - functions common to all
** database connections.  After initialization, this table is
** read-only.
*/
SQLITE_WSD FuncDefHash sqlite3GlobalFunctions;

SQLITE_WSD struct Sqlite3Config sqlite3Config = {
   SQLITE_DEFAULT_MEMSTATUS,  /* bMemstat */
   1,                         /* bCoreMutex */
   SQLITE_THREADSAFE==1,      /* bFullMutex */
   SQLITE_USE_URI,            /* bOpenUri */
   SQLITE_ALLOW_COVERING_INDEX_SCAN,   /* bUseCis */
   0x7ffffffe,                /* mxStrlen */
   0,                         /* neverCorrupt */
   128,                       /* szLookaside */
   500,                       /* nLookaside */
   {0,0,0,0,0,0,0,0},         /* m */
   {0,0,0,0,0,0,0,0,0},       /* mutex */
   {0,0,0,0,0,0,0,0,0,0,0,0,0},/* pcache2 */
   (void*)0,                  /* pHeap */
   0,                         /* nHeap */
................................................................................
   0,                         /* pLogArg */
   0,                         /* bLocaltimeFault */
#ifdef SQLITE_ENABLE_SQLLOG
   0,                         /* xSqllog */
   0                          /* pSqllogArg */
#endif
};


/*
** Hash table for global functions - functions common to all
** database connections.  After initialization, this table is
** read-only.
*/
SQLITE_WSD FuncDefHash sqlite3GlobalFunctions;

    case SQLITE_TESTCTRL_EXPLAIN_STMT: {
      sqlite3_stmt *pStmt = va_arg(ap, sqlite3_stmt*);
      const char **pzRet = va_arg(ap, const char**);
      *pzRet = sqlite3VdbeExplanation((Vdbe*)pStmt);
      break;
    }
#endif














  }
  va_end(ap);
#endif /* SQLITE_OMIT_BUILTIN_TEST */
  return rc;
}

    case SQLITE_TESTCTRL_EXPLAIN_STMT: {
      sqlite3_stmt *pStmt = va_arg(ap, sqlite3_stmt*);
      const char **pzRet = va_arg(ap, const char**);
      *pzRet = sqlite3VdbeExplanation((Vdbe*)pStmt);
      break;
    }
#endif

    /*   sqlite3_test_control(SQLITE_TESTCTRL_NEVER_CORRUPT, int);
    **
    ** Set or clear a flag that indicates that the database file is always well-
    ** formed and never corrupt.  This flag is clear by default, indicating that
    ** database files might have arbitrary corruption.  Setting the flag during
    ** testing causes certain assert() statements in the code to be activated
    ** that demonstrat invariants on well-formed database files.
    */
    case SQLITE_TESTCTRL_NEVER_CORRUPT: {
      sqlite3Config.neverCorrupt = va_arg(ap, int);
      break;
    }

  }
  va_end(ap);
#endif /* SQLITE_OMIT_BUILTIN_TEST */
  return rc;
}

#define SQLITE_TESTCTRL_ALWAYS                  13
#define SQLITE_TESTCTRL_RESERVE                 14
#define SQLITE_TESTCTRL_OPTIMIZATIONS           15
#define SQLITE_TESTCTRL_ISKEYWORD               16
#define SQLITE_TESTCTRL_SCRATCHMALLOC           17
#define SQLITE_TESTCTRL_LOCALTIME_FAULT         18
#define SQLITE_TESTCTRL_EXPLAIN_STMT            19

#define SQLITE_TESTCTRL_LAST                    19

/*
** CAPI3REF: SQLite Runtime Status
**
** ^This interface is used to retrieve runtime status information
** about the performance of SQLite, and optionally to reset various
** highwater marks.  ^The first argument is an integer code for

#define SQLITE_TESTCTRL_ALWAYS                  13
#define SQLITE_TESTCTRL_RESERVE                 14
#define SQLITE_TESTCTRL_OPTIMIZATIONS           15
#define SQLITE_TESTCTRL_ISKEYWORD               16
#define SQLITE_TESTCTRL_SCRATCHMALLOC           17
#define SQLITE_TESTCTRL_LOCALTIME_FAULT         18
#define SQLITE_TESTCTRL_EXPLAIN_STMT            19
#define SQLITE_TESTCTRL_NEVER_CORRUPT           20
#define SQLITE_TESTCTRL_LAST                    20

/*
** CAPI3REF: SQLite Runtime Status
**
** ^This interface is used to retrieve runtime status information
** about the performance of SQLite, and optionally to reset various
** highwater marks.  ^The first argument is an integer code for

struct Sqlite3Config {
  int bMemstat;                     /* True to enable memory status */
  int bCoreMutex;                   /* True to enable core mutexing */
  int bFullMutex;                   /* True to enable full mutexing */
  int bOpenUri;                     /* True to interpret filenames as URIs */
  int bUseCis;                      /* Use covering indices for full-scans */
  int mxStrlen;                     /* Maximum string length */

  int szLookaside;                  /* Default lookaside buffer size */
  int nLookaside;                   /* Default lookaside buffer count */
  sqlite3_mem_methods m;            /* Low-level memory allocation interface */
  sqlite3_mutex_methods mutex;      /* Low-level mutex interface */
  sqlite3_pcache_methods2 pcache2;  /* Low-level page-cache interface */
  void *pHeap;                      /* Heap storage space */
  int nHeap;                        /* Size of pHeap[] */
................................................................................
  int bLocaltimeFault;              /* True to fail localtime() calls */
#ifdef SQLITE_ENABLE_SQLLOG
  void(*xSqllog)(void*,sqlite3*,const char*, int);
  void *pSqllogArg;
#endif
};


















/*
** Context pointer passed down through the tree-walk.
*/
struct Walker {
  int (*xExprCallback)(Walker*, Expr*);     /* Callback for expressions */
  int (*xSelectCallback)(Walker*,Select*);  /* Callback for SELECTs */
  Parse *pParse;                            /* Parser context.  */

struct Sqlite3Config {
  int bMemstat;                     /* True to enable memory status */
  int bCoreMutex;                   /* True to enable core mutexing */
  int bFullMutex;                   /* True to enable full mutexing */
  int bOpenUri;                     /* True to interpret filenames as URIs */
  int bUseCis;                      /* Use covering indices for full-scans */
  int mxStrlen;                     /* Maximum string length */
  int neverCorrupt;                 /* Database is always well-formed */
  int szLookaside;                  /* Default lookaside buffer size */
  int nLookaside;                   /* Default lookaside buffer count */
  sqlite3_mem_methods m;            /* Low-level memory allocation interface */
  sqlite3_mutex_methods mutex;      /* Low-level mutex interface */
  sqlite3_pcache_methods2 pcache2;  /* Low-level page-cache interface */
  void *pHeap;                      /* Heap storage space */
  int nHeap;                        /* Size of pHeap[] */
................................................................................
  int bLocaltimeFault;              /* True to fail localtime() calls */
#ifdef SQLITE_ENABLE_SQLLOG
  void(*xSqllog)(void*,sqlite3*,const char*, int);
  void *pSqllogArg;
#endif
};

/*
** This macro is used inside of assert() statements to indicate that
** the assert is only valid on a well-formed database.  Instead of:
**
**     assert( X );
**
** One writes:
**
**     assert( X || CORRUPTIBLE );
**
** CORRUPTIBLE is true during normal operation.  But for many test cases,
** it is set to false using a sqlite3_test_control().  This enables assert()
** statements to prove things that are always true for well-formed
** databases.
*/
#define CORRUPTIBLE  (sqlite3Config.neverCorrupt==0)

/*
** Context pointer passed down through the tree-walk.
*/
struct Walker {
  int (*xExprCallback)(Walker*, Expr*);     /* Callback for expressions */
  int (*xSelectCallback)(Walker*,Select*);  /* Callback for SELECTs */
  Parse *pParse;                            /* Parser context.  */

  Tcl_Interp *interp,    /* The TCL interpreter that invoked this command */
  int objc,              /* Number of arguments */
  Tcl_Obj *CONST objv[]  /* Command arguments */
){
  sqlite3_test_control(SQLITE_TESTCTRL_PRNG_RESET);
  return TCL_OK;
}
































/*
** tclcmd:  pcache_stats
*/
static int test_pcache_stats(
  ClientData clientData, /* Pointer to sqlite3_enable_XXX function */
  Tcl_Interp *interp,    /* The TCL interpreter that invoked this command */
................................................................................
     { "sqlite3_enable_load_extension", test_enable_load,        0},
     { "sqlite3_extended_result_codes", test_extended_result_codes, 0},
     { "sqlite3_limit",                 test_limit,                 0},

     { "save_prng_state",               save_prng_state,    0 },
     { "restore_prng_state",            restore_prng_state, 0 },
     { "reset_prng_state",              reset_prng_state,   0 },


     { "optimization_control",          optimization_control,0},
#if SQLITE_OS_WIN
     { "lock_win32_file",               win32_file_lock,    0 },
     { "exists_win32_path",             win32_exists_path,  0 },
     { "find_win32_file",               win32_find_file,    0 },
     { "delete_win32_file",             win32_delete_file,  0 },
     { "make_win32_dir",                win32_mkdir,        0 },

  Tcl_Interp *interp,    /* The TCL interpreter that invoked this command */
  int objc,              /* Number of arguments */
  Tcl_Obj *CONST objv[]  /* Command arguments */
){
  sqlite3_test_control(SQLITE_TESTCTRL_PRNG_RESET);
  return TCL_OK;
}

/*
** tclcmd:  database_may_be_corrupt
**
** Indicate that database files might be corrupt.  In other words, set the normal
** state of operation.
*/
static int database_may_be_corrupt(
  ClientData clientData, /* Pointer to sqlite3_enable_XXX function */
  Tcl_Interp *interp,    /* The TCL interpreter that invoked this command */
  int objc,              /* Number of arguments */
  Tcl_Obj *CONST objv[]  /* Command arguments */
){
  sqlite3_test_control(SQLITE_TESTCTRL_NEVER_CORRUPT, 0);
  return TCL_OK;
}
/*
** tclcmd:  database_never_corrupt
**
** Indicate that database files are always well-formed.  This enables extra assert()
** statements that test conditions that are always true for well-formed databases.
*/
static int database_never_corrupt(
  ClientData clientData, /* Pointer to sqlite3_enable_XXX function */
  Tcl_Interp *interp,    /* The TCL interpreter that invoked this command */
  int objc,              /* Number of arguments */
  Tcl_Obj *CONST objv[]  /* Command arguments */
){
  sqlite3_test_control(SQLITE_TESTCTRL_NEVER_CORRUPT, 1);
  return TCL_OK;
}

/*
** tclcmd:  pcache_stats
*/
static int test_pcache_stats(
  ClientData clientData, /* Pointer to sqlite3_enable_XXX function */
  Tcl_Interp *interp,    /* The TCL interpreter that invoked this command */
................................................................................
     { "sqlite3_enable_load_extension", test_enable_load,        0},
     { "sqlite3_extended_result_codes", test_extended_result_codes, 0},
     { "sqlite3_limit",                 test_limit,                 0},

     { "save_prng_state",               save_prng_state,    0 },
     { "restore_prng_state",            restore_prng_state, 0 },
     { "reset_prng_state",              reset_prng_state,   0 },
     { "database_never_corrupt",        database_never_corrupt, 0},
     { "database_may_be_corrupt",       database_may_be_corrupt, 0},
     { "optimization_control",          optimization_control,0},
#if SQLITE_OS_WIN
     { "lock_win32_file",               win32_file_lock,    0 },
     { "exists_win32_path",             win32_exists_path,  0 },
     { "find_win32_file",               win32_find_file,    0 },
     { "delete_win32_file",             win32_delete_file,  0 },
     { "make_win32_dir",                win32_mkdir,        0 },

  ** impact, since this routine is a very high runner.  And so, we choose
  ** to ignore the compiler warnings and leave this variable uninitialized.
  */
  /*  mem1.u.i = 0;  // not needed, here to silence compiler warning */
  
  idx1 = getVarint32(aKey1, szHdr1);
  d1 = szHdr1;
  assert( pKeyInfo->nField+pKeyInfo->nXField>=pPKey2->nField );
  assert( pKeyInfo->aSortOrder!=0 );

  do{
    u32 serial_type1;

    /* Read the serial types for the next element in each key. */
    idx1 += getVarint32( aKey1+idx1, serial_type1 );

    /* Verify that there is enough key space remaining to avoid

  ** impact, since this routine is a very high runner.  And so, we choose
  ** to ignore the compiler warnings and leave this variable uninitialized.
  */
  /*  mem1.u.i = 0;  // not needed, here to silence compiler warning */
  
  idx1 = getVarint32(aKey1, szHdr1);
  d1 = szHdr1;
  assert( pKeyInfo->nField+pKeyInfo->nXField>=pPKey2->nField || CORRUPTIBLE );
  assert( pKeyInfo->aSortOrder!=0 );
  assert( (idx1<=szHdr1 && i<pPKey2->nField) || CORRUPTIBLE );
  do{
    u32 serial_type1;

    /* Read the serial types for the next element in each key. */
    idx1 += getVarint32( aKey1+idx1, serial_type1 );

    /* Verify that there is enough key space remaining to avoid

set testdir [file dirname $argv0]
source $testdir/tester.tcl

# Do not use a codec for tests in this file, as the database file is
# manipulated directly using tcl scripts (using the [hexio_write] command).
#
do_not_use_codec





# Construct a large database for testing.
#
do_test corrupt-1.1 {
  execsql {
    BEGIN;
    CREATE TABLE t1(x);

set testdir [file dirname $argv0]
source $testdir/tester.tcl

# Do not use a codec for tests in this file, as the database file is
# manipulated directly using tcl scripts (using the [hexio_write] command).
#
do_not_use_codec

# These tests deal with corrupt database files
#
database_may_be_corrupt

# Construct a large database for testing.
#
do_test corrupt-1.1 {
  execsql {
    BEGIN;
    CREATE TABLE t1(x);

set testdir [file dirname $argv0]
source $testdir/tester.tcl

# Do not use a codec for tests in this file, as the database file is
# manipulated directly using tcl scripts (using the [hexio_write] command).
#
do_not_use_codec





set presql ""
catch { set presql "$::G(perm:presql);" }
unset -nocomplain ::G(perm:presql)

# The following tests - corrupt2-1.* - create some databases corrupted in
# specific ways and ensure that SQLite detects them as corrupt.

set testdir [file dirname $argv0]
source $testdir/tester.tcl

# Do not use a codec for tests in this file, as the database file is
# manipulated directly using tcl scripts (using the [hexio_write] command).
#
do_not_use_codec

# These tests deal with corrupt database files
#
database_may_be_corrupt

set presql ""
catch { set presql "$::G(perm:presql);" }
unset -nocomplain ::G(perm:presql)

# The following tests - corrupt2-1.* - create some databases corrupted in
# specific ways and ensure that SQLite detects them as corrupt.

set testdir [file dirname $argv0]
source $testdir/tester.tcl

# Do not use a codec for tests in this file, as the database file is
# manipulated directly using tcl scripts (using the [hexio_write] command).
#
do_not_use_codec





# We must have the page_size pragma for these tests to work.
#
ifcapable !pager_pragmas||direct_read {
  finish_test
  return
}

set testdir [file dirname $argv0]
source $testdir/tester.tcl

# Do not use a codec for tests in this file, as the database file is
# manipulated directly using tcl scripts (using the [hexio_write] command).
#
do_not_use_codec

# These tests deal with corrupt database files
#
database_may_be_corrupt

# We must have the page_size pragma for these tests to work.
#
ifcapable !pager_pragmas||direct_read {
  finish_test
  return
}

set testdir [file dirname $argv0]
source $testdir/tester.tcl

# Do not use a codec for tests in this file, as the database file is
# manipulated directly using tcl scripts (using the [hexio_write] command).
#
do_not_use_codec





# We must have the page_size pragma for these tests to work.
#
ifcapable !pager_pragmas {
  finish_test
  return
}

set testdir [file dirname $argv0]
source $testdir/tester.tcl

# Do not use a codec for tests in this file, as the database file is
# manipulated directly using tcl scripts (using the [hexio_write] command).
#
do_not_use_codec

# These tests deal with corrupt database files
#
database_may_be_corrupt

# We must have the page_size pragma for these tests to work.
#
ifcapable !pager_pragmas {
  finish_test
  return
}

# segfault if it sees a corrupt database file.  Checks for 
# malformed schema.
#
# $Id: corrupt5.test,v 1.3 2009/06/04 02:47:04 shane Exp $

set testdir [file dirname $argv0]
source $testdir/tester.tcl





# We must have the page_size pragma for these tests to work.
#
ifcapable !pager_pragmas {
  finish_test
  return
}

# segfault if it sees a corrupt database file.  Checks for 
# malformed schema.
#
# $Id: corrupt5.test,v 1.3 2009/06/04 02:47:04 shane Exp $

set testdir [file dirname $argv0]
source $testdir/tester.tcl

# These tests deal with corrupt database files
#
database_may_be_corrupt

# We must have the page_size pragma for these tests to work.
#
ifcapable !pager_pragmas {
  finish_test
  return
}

set testdir [file dirname $argv0]
source $testdir/tester.tcl

# Do not use a codec for tests in this file, as the database file is
# manipulated directly using tcl scripts (using the [hexio_write] command).
#
do_not_use_codec





# We must have the page_size pragma for these tests to work.
#
ifcapable !pager_pragmas {
  finish_test
  return
}

set testdir [file dirname $argv0]
source $testdir/tester.tcl

# Do not use a codec for tests in this file, as the database file is
# manipulated directly using tcl scripts (using the [hexio_write] command).
#
do_not_use_codec

# These tests deal with corrupt database files
#
database_may_be_corrupt

# We must have the page_size pragma for these tests to work.
#
ifcapable !pager_pragmas {
  finish_test
  return
}

set testdir [file dirname $argv0]
source $testdir/tester.tcl

# Do not use a codec for tests in this file, as the database file is
# manipulated directly using tcl scripts (using the [hexio_write] command).
#
do_not_use_codec





# We must have the page_size pragma for these tests to work.
#
ifcapable !pager_pragmas {
  finish_test
  return
}

set testdir [file dirname $argv0]
source $testdir/tester.tcl

# Do not use a codec for tests in this file, as the database file is
# manipulated directly using tcl scripts (using the [hexio_write] command).
#
do_not_use_codec

# These tests deal with corrupt database files
#
database_may_be_corrupt

# We must have the page_size pragma for these tests to work.
#
ifcapable !pager_pragmas {
  finish_test
  return
}

set testdir [file dirname $argv0]
source $testdir/tester.tcl

# Do not use a codec for tests in this file, as the database file is
# manipulated directly using tcl scripts (using the [hexio_write] command).
#
do_not_use_codec





# We must have the page_size pragma for these tests to work.
#
ifcapable !pager_pragmas||!autovacuum {
  finish_test
  return
}

set testdir [file dirname $argv0]
source $testdir/tester.tcl

# Do not use a codec for tests in this file, as the database file is
# manipulated directly using tcl scripts (using the [hexio_write] command).
#
do_not_use_codec

# These tests deal with corrupt database files
#
database_may_be_corrupt

# We must have the page_size pragma for these tests to work.
#
ifcapable !pager_pragmas||!autovacuum {
  finish_test
  return
}

set testdir [file dirname $argv0]
source $testdir/tester.tcl

# Do not use a codec for tests in this file, as the database file is
# manipulated directly using tcl scripts (using the [hexio_write] command).
#
do_not_use_codec





# We must have the page_size pragma for these tests to work.
#
ifcapable !pager_pragmas {
  finish_test
  return
}

set testdir [file dirname $argv0]
source $testdir/tester.tcl

# Do not use a codec for tests in this file, as the database file is
# manipulated directly using tcl scripts (using the [hexio_write] command).
#
do_not_use_codec

# These tests deal with corrupt database files
#
database_may_be_corrupt

# We must have the page_size pragma for these tests to work.
#
ifcapable !pager_pragmas {
  finish_test
  return
}

set testdir [file dirname $argv0]
source $testdir/tester.tcl

# Do not use a codec for tests in this file, as the database file is
# manipulated directly using tcl scripts (using the [hexio_write] command).
#
do_not_use_codec






# Create a database to work with.
#
do_test corruptA-1.1 {
  execsql {
    CREATE TABLE t1(x);

set testdir [file dirname $argv0]
source $testdir/tester.tcl

# Do not use a codec for tests in this file, as the database file is
# manipulated directly using tcl scripts (using the [hexio_write] command).
#
do_not_use_codec

# These tests deal with corrupt database files
#
database_may_be_corrupt


# Create a database to work with.
#
do_test corruptA-1.1 {
  execsql {
    CREATE TABLE t1(x);

set testdir [file dirname $argv0]
source $testdir/tester.tcl

# Do not use a codec for tests in this file, as the database file is
# manipulated directly using tcl scripts (using the [hexio_write] command).
#
do_not_use_codec






do_test corruptB-1.1 {
  execsql {
    PRAGMA auto_vacuum = 1;
    CREATE TABLE t1(x);
    INSERT INTO t1 VALUES(randomblob(200));

set testdir [file dirname $argv0]
source $testdir/tester.tcl

# Do not use a codec for tests in this file, as the database file is
# manipulated directly using tcl scripts (using the [hexio_write] command).
#
do_not_use_codec

# These tests deal with corrupt database files
#
database_may_be_corrupt


do_test corruptB-1.1 {
  execsql {
    PRAGMA auto_vacuum = 1;
    CREATE TABLE t1(x);
    INSERT INTO t1 VALUES(randomblob(200));

set testdir [file dirname $argv0]
source $testdir/tester.tcl

# Do not use a codec for tests in this file, as the database file is
# manipulated directly using tcl scripts (using the [hexio_write] command).
#
do_not_use_codec





# Construct a compact, dense database for testing.
#
do_test corruptC-1.1 {
  execsql {
    PRAGMA auto_vacuum = 0;
    PRAGMA legacy_file_format=1;

set testdir [file dirname $argv0]
source $testdir/tester.tcl

# Do not use a codec for tests in this file, as the database file is
# manipulated directly using tcl scripts (using the [hexio_write] command).
#
do_not_use_codec

# These tests deal with corrupt database files
#
database_may_be_corrupt

# Construct a compact, dense database for testing.
#
do_test corruptC-1.1 {
  execsql {
    PRAGMA auto_vacuum = 0;
    PRAGMA legacy_file_format=1;

set testdir [file dirname $argv0]
source $testdir/tester.tcl

# Do not use a codec for tests in this file, as the database file is
# manipulated directly using tcl scripts (using the [hexio_write] command).
#
do_not_use_codec





#--------------------------------------------------------------------------
# OVERVIEW
#
#   This test file attempts to verify that SQLite does not read past the 
#   end of any in-memory buffers as a result of corrupted database page 
#   images. Usually this happens because a field within a database page

set testdir [file dirname $argv0]
source $testdir/tester.tcl

# Do not use a codec for tests in this file, as the database file is
# manipulated directly using tcl scripts (using the [hexio_write] command).
#
do_not_use_codec

# These tests deal with corrupt database files
#
database_may_be_corrupt

#--------------------------------------------------------------------------
# OVERVIEW
#
#   This test file attempts to verify that SQLite does not read past the 
#   end of any in-memory buffers as a result of corrupted database page 
#   images. Usually this happens because a field within a database page

set testdir [file dirname $argv0]
source $testdir/tester.tcl

# Do not use a codec for tests in this file, as the database file is
# manipulated directly using tcl scripts (using the [hexio_write] command).
#
do_not_use_codec





# Do not run the tests in this file if ENABLE_OVERSIZE_CELL_CHECK is on.
#
ifcapable oversize_cell_check {
  finish_test
  return
}

set testdir [file dirname $argv0]
source $testdir/tester.tcl

# Do not use a codec for tests in this file, as the database file is
# manipulated directly using tcl scripts (using the [hexio_write] command).
#
do_not_use_codec

# These tests deal with corrupt database files
#
database_may_be_corrupt

# Do not run the tests in this file if ENABLE_OVERSIZE_CELL_CHECK is on.
#
ifcapable oversize_cell_check {
  finish_test
  return
}

source $testdir/tester.tcl
set testprefix corruptF

# Do not use a codec for tests in this file, as the database file is
# manipulated directly using tcl scripts (using the [hexio_write] command).
#
do_not_use_codec





proc str {i} { format %08d $i }

# Create a 6 page database containing a single table - t1. Table t1 
# consists of page 2 (the root page) and pages 5 and 6 (leaf pages). 
# Database pages 3 and 4 are on the free list.
#

source $testdir/tester.tcl
set testprefix corruptF

# Do not use a codec for tests in this file, as the database file is
# manipulated directly using tcl scripts (using the [hexio_write] command).
#
do_not_use_codec

# These tests deal with corrupt database files
#
database_may_be_corrupt

proc str {i} { format %08d $i }

# Create a 6 page database containing a single table - t1. Table t1 
# consists of page 2 (the root page) and pages 5 and 6 (leaf pages). 
# Database pages 3 and 4 are on the free list.
#

source $testdir/tester.tcl
set testprefix corruptG

# Do not use a codec for tests in this file, as the database file is
# manipulated directly using tcl scripts (using the [hexio_write] command).
#
do_not_use_codec





# Create a simple database with a single entry.  Then corrupt the
# header-size varint on the index payload so that it maps into a
# negative number.  Try to use the database.
#

do_execsql_test 1.1 {

source $testdir/tester.tcl
set testprefix corruptG

# Do not use a codec for tests in this file, as the database file is
# manipulated directly using tcl scripts (using the [hexio_write] command).
#
do_not_use_codec

# These tests deal with corrupt database files
#
database_may_be_corrupt

# Create a simple database with a single entry.  Then corrupt the
# header-size varint on the index payload so that it maps into a
# negative number.  Try to use the database.
#

do_execsql_test 1.1 {

# If the library is compiled with the SQLITE_DEFAULT_AUTOVACUUM macro set
# to non-zero, then set the global variable $AUTOVACUUM to 1.
set AUTOVACUUM $sqlite_options(default_autovacuum)

# Make sure the FTS enhanced query syntax is disabled.
set sqlite_fts3_enable_parentheses 0







source $testdir/thread_common.tcl
source $testdir/malloc_common.tcl

# If the library is compiled with the SQLITE_DEFAULT_AUTOVACUUM macro set
# to non-zero, then set the global variable $AUTOVACUUM to 1.
set AUTOVACUUM $sqlite_options(default_autovacuum)

# Make sure the FTS enhanced query syntax is disabled.
set sqlite_fts3_enable_parentheses 0

# During testing, assume that all database files are well-formed.  The
# few test cases that deliberately corrupt database files should rescind 
# this setting by invoking "database_can_be_corrupt"
#
database_never_corrupt

source $testdir/thread_common.tcl
source $testdir/malloc_common.tcl