SQLite

# 
TCC += -D_HAVE_SQLITE_CONFIG_H -DBUILD_sqlite

# Define -DNDEBUG to compile without debugging (i.e., for production usage)
# Omitting the define will cause extra debugging code to be inserted and
# includes extra comments when "EXPLAIN stmt" is used.
#
TCC += @TARGET_DEBUG@

# Compiler options needed for programs that use the TCL library.
#
TCC += @TCL_INCLUDE_SPEC@

# The library that programs using TCL must link against.
#

  $(TOP)/src/malloc.c \
  $(TOP)/src/mem0.c \
  $(TOP)/src/mem1.c \
  $(TOP)/src/mem2.c \
  $(TOP)/src/mem3.c \
  $(TOP)/src/mem5.c \
  $(TOP)/src/memjournal.c \
  $(TOP)/src/msvc.h \
  $(TOP)/src/mutex.c \
  $(TOP)/src/mutex.h \
  $(TOP)/src/mutex_noop.c \
  $(TOP)/src/mutex_unix.c \
  $(TOP)/src/mutex_w32.c \
  $(TOP)/src/notify.c \
  $(TOP)/src/os.c \

#
HDR = \
   $(TOP)/src/btree.h \
   $(TOP)/src/btreeInt.h \
   $(TOP)/src/hash.h \
   $(TOP)/src/hwtime.h \
   keywordhash.h \
   $(TOP)/src/msvc.h \
   $(TOP)/src/mutex.h \
   opcodes.h \
   $(TOP)/src/os.h \
   $(TOP)/src/os_common.h \
   $(TOP)/src/os_setup.h \
   $(TOP)/src/os_win.h \
   $(TOP)/src/pager.h \

TOP = .

# Set this non-0 to create and use the SQLite amalgamation file.
#
!IFNDEF USE_AMALGAMATION
USE_AMALGAMATION = 1
!ENDIF

# Set this non-0 to enable full warnings (-W4, etc) when compiling.
#
!IFNDEF USE_FULLWARN
USE_FULLWARN = 0
!ENDIF

# If necessary, create a list of harmless compiler warnings to disable when
# compiling the build tools.  For the SQLite source code itself, warnings,
# if any, will be disabled from within it.
#
!IFNDEF NO_WARN
!IF $(USE_FULLWARN)!=0
NO_WARN = -wd4054 -wd4055 -wd4100 -wd4127 -wd4152 -wd4189 -wd4206 -wd4210
NO_WARN = $(NO_WARN) -wd4232 -wd4244 -wd4305 -wd4306 -wd4702 -wd4706
!ENDIF
!ENDIF

# Set this non-0 to use the library paths and other options necessary for
# Windows Phone 8.1.
#
!IFNDEF USE_WP81_OPTS
USE_WP81_OPTS = 0
!ENDIF

!ENDIF

NSDKLIBPATH = $(NSDKLIBPATH:\\=\)

# C compiler and options for use in building executables that
# will run on the platform that is doing the build.
#
!IF $(USE_FULLWARN)!=0
BCC = $(NCC) -W4
!ELSE
BCC = $(NCC) -W3
!ENDIF

# Check if assembly code listings should be generated for the source
# code files to be compiled.
#
!IF $(USE_LISTINGS)!=0
BCC = $(BCC) -FAcs
!ENDIF

# Check if the native library paths should be used when compiling
# the command line tools used during the compilation process.  If
# so, set the necessary macro now.
#
!IF $(USE_NATIVE_LIBPATHS)!=0
NLTLIBPATHS = "/LIBPATH:$(NCRTLIBPATH)" "/LIBPATH:$(NSDKLIBPATH)"
!ENDIF

# C compiler and options for use in building executables that
# will run on the target platform.  (BCC and TCC are usually the
# same unless your are cross-compiling.)
#
!IF $(USE_FULLWARN)!=0
TCC = $(CC) -W4 -DINCLUDE_MSVC_H=1
!ELSE
TCC = $(CC) -W3
!ENDIF

TCC = $(TCC) -DSQLITE_OS_WIN=1 -I. -I$(TOP) -I$(TOP)\src -fp:precise
RCC = $(RC) -DSQLITE_OS_WIN=1 -I$(TOP) -I$(TOP)\src

# Check if assembly code listings should be generated for the source
# code files to be compiled.
#
!IF $(USE_LISTINGS)!=0
TCC = $(TCC) -FAcs

  $(TOP)\src\malloc.c \
  $(TOP)\src\mem0.c \
  $(TOP)\src\mem1.c \
  $(TOP)\src\mem2.c \
  $(TOP)\src\mem3.c \
  $(TOP)\src\mem5.c \
  $(TOP)\src\memjournal.c \
  $(TOP)\src\msvc.h \
  $(TOP)\src\mutex.c \
  $(TOP)\src\mutex.h \
  $(TOP)\src\mutex_noop.c \
  $(TOP)\src\mutex_unix.c \
  $(TOP)\src\mutex_w32.c \
  $(TOP)\src\notify.c \
  $(TOP)\src\os.c \

#
HDR = \
   $(TOP)\src\btree.h \
   $(TOP)\src\btreeInt.h \
   $(TOP)\src\hash.h \
   $(TOP)\src\hwtime.h \
   keywordhash.h \
   $(TOP)\src\msvc.h \
   $(TOP)\src\mutex.h \
   opcodes.h \
   $(TOP)\src\os.h \
   $(TOP)\src\os_common.h \
   $(TOP)\src\os_setup.h \
   $(TOP)\src\os_win.h \
   $(TOP)\src\pager.h \

libsqlite3.lib:	$(LIBOBJ)
	$(LTLIB) $(LTLIBOPTS) /OUT:$@ $(LIBOBJ) $(TLIBS)

libtclsqlite3.lib:	tclsqlite.lo libsqlite3.lib
	$(LTLIB) $(LTLIBOPTS) $(LTLIBPATHS) /OUT:$@ tclsqlite.lo libsqlite3.lib $(LIBTCL:tcl=tclstub) $(TLIBS)

sqlite3.exe:	$(TOP)\src\shell.c libsqlite3.lib $(LIBRESOBJS) sqlite3.h
	$(LTLINK) $(READLINE_FLAGS) $(TOP)\src\shell.c \

		/link $(LTLINKOPTS) $(LTLIBPATHS) libsqlite3.lib $(LIBRESOBJS) $(LIBREADLINE) $(LTLIBS) $(TLIBS)

mptester.exe:	$(TOP)\mptest\mptest.c libsqlite3.lib $(LIBRESOBJS) sqlite3.h
	$(LTLINK) $(TOP)\mptest\mptest.c \
		/link $(LTLINKOPTS) $(LTLIBPATHS) libsqlite3.lib $(LIBRESOBJS) $(LIBREADLINE) $(LTLIBS) $(TLIBS)

# This target creates a directory named "tsrc" and fills it with

# Rules to build the LEMON compiler generator
#
lempar.c:	$(TOP)\src\lempar.c
	copy $(TOP)\src\lempar.c .

lemon.exe:	$(TOP)\tool\lemon.c lempar.c
	$(BCC) $(NO_WARN) -Daccess=_access \
		-Fe$@ $(TOP)\tool\lemon.c /link $(NLTLINKOPTS) $(NLTLIBPATHS)

# Rules to build individual *.lo files from generated *.c files. This
# applies to:
#
#     parse.lo
#     opcodes.lo
#

	move parse.h parse.h.temp
	$(NAWK) -f $(TOP)\addopcodes.awk parse.h.temp > parse.h

sqlite3.h:	$(TOP)\src\sqlite.h.in $(TOP)\manifest.uuid $(TOP)\VERSION
	$(TCLSH_CMD) $(TOP)\tool\mksqlite3h.tcl $(TOP:\=/) > sqlite3.h

mkkeywordhash.exe:	$(TOP)\tool\mkkeywordhash.c
	$(BCC) $(NO_WARN) -Fe$@ $(REQ_FEATURE_FLAGS) $(OPT_FEATURE_FLAGS) $(OPTS) \
		$(TOP)\tool\mkkeywordhash.c /link $(NLTLINKOPTS) $(NLTLIBPATHS)

keywordhash.h:	$(TOP)\tool\mkkeywordhash.c mkkeywordhash.exe
	.\mkkeywordhash.exe > keywordhash.h



# Rules to build the extension objects.

#
# If using the amalgamation, use sqlite3.c directly to build the test
# fixture.  Otherwise link against libsqlite3.lib.  (This distinction is
# necessary because the test fixture requires non-API symbols which are
# hidden when the library is built via the amalgamation).
#
TESTFIXTURE_FLAGS = -DTCLSH=1 -DSQLITE_TEST=1 -DSQLITE_CRASH_TEST=1
TESTFIXTURE_FLAGS = $(TESTFIXTURE_FLAGS) -DSQLITE_SERVER=1 -DSQLITE_PRIVATE=""
TESTFIXTURE_FLAGS = $(TESTFIXTURE_FLAGS) -DSQLITE_CORE $(NO_WARN)

TESTFIXTURE_SRC0 = $(TESTEXT) $(TESTSRC2) libsqlite3.lib
TESTFIXTURE_SRC1 = $(TESTEXT) $(TESTSRC3) $(SQLITE3C)
!IF $(USE_AMALGAMATION)==0
TESTFIXTURE_SRC = $(TESTSRC) $(TOP)\src\tclsqlite.c $(TESTFIXTURE_SRC0)
!ELSE
TESTFIXTURE_SRC = $(TESTSRC) $(TOP)\src\tclsqlite.c $(TESTFIXTURE_SRC1)

  $(TOP)/src/malloc.c \
  $(TOP)/src/mem0.c \
  $(TOP)/src/mem1.c \
  $(TOP)/src/mem2.c \
  $(TOP)/src/mem3.c \
  $(TOP)/src/mem5.c \
  $(TOP)/src/memjournal.c \
  $(TOP)/src/msvc.h \
  $(TOP)/src/mutex.c \
  $(TOP)/src/mutex.h \
  $(TOP)/src/mutex_noop.c \
  $(TOP)/src/mutex_unix.c \
  $(TOP)/src/mutex_w32.c \
  $(TOP)/src/notify.c \
  $(TOP)/src/os.c \

#
HDR = \
   $(TOP)/src/btree.h \
   $(TOP)/src/btreeInt.h \
   $(TOP)/src/hash.h \
   $(TOP)/src/hwtime.h \
   keywordhash.h \
   $(TOP)/src/msvc.h \
   $(TOP)/src/mutex.h \
   opcodes.h \
   $(TOP)/src/os.h \
   $(TOP)/src/os_common.h \
   $(TOP)/src/os_setup.h \
   $(TOP)/src/os_win.h \
   $(TOP)/src/pager.h \

#undef HAVE_INT8_T

/* Define to 1 if the system has the type `intptr_t'. */
#undef HAVE_INTPTR_T

/* Define to 1 if you have the <inttypes.h> header file. */
#undef HAVE_INTTYPES_H

/* Define to 1 if you have the `isnan' function. */
#undef HAVE_ISNAN

/* Define to 1 if you have the `localtime_r' function. */
#undef HAVE_LOCALTIME_R

/* Define to 1 if you have the `localtime_s' function. */
#undef HAVE_LOCALTIME_S

#undef HAVE_MEMORY_H

/* Define to 1 if you have the <stdint.h> header file. */
#undef HAVE_STDINT_H

/* Define to 1 if you have the <stdlib.h> header file. */
#undef HAVE_STDLIB_H

/* Define to 1 if you have the strchrnul() function */
#undef HAVE_STRCHRNUL

/* Define to 1 if you have the <strings.h> header file. */
#undef HAVE_STRINGS_H

/* Define to 1 if you have the <string.h> header file. */
#undef HAVE_STRING_H

TCLLIBDIR
program_prefix
VERSION
RELEASE
VERSION_NUMBER
BUILD_CC
SQLITE_THREADSAFE

ALLOWRELEASE
TEMP_STORE
BUILD_EXEEXT
SQLITE_OS_UNIX
SQLITE_OS_WIN
TARGET_EXEEXT
TCL_VERSION

enable_shared
enable_static
with_pic
enable_fast_install
with_gnu_ld
enable_libtool_lock
enable_largefile

enable_threadsafe

enable_releasemode
enable_tempstore
enable_tcl
with_tcl
enable_readline
with_readline_lib
with_readline_inc

  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
  --enable-shared[=PKGS]  build shared libraries [default=yes]
  --enable-static[=PKGS]  build static libraries [default=yes]
  --enable-fast-install[=PKGS]
                          optimize for fast installation [default=yes]
  --disable-libtool-lock  avoid locking (might break parallel builds)
  --disable-largefile     omit support for large files
  --disable-threadsafe    Disable mutexing


  --enable-releasemode    Support libtool link to release mode
  --enable-tempstore      Use an in-ram database for temporary tables
                          (never,no,yes,always)
  --disable-tcl           do not build TCL extension
  --disable-readline      disable readline support [default=detect]
  --enable-debug          enable debugging & verbose explain
  --disable-amalgamation  Disable the amalgamation and instead build all files
                          separately
  --disable-load-extension
                          Disable loading of external extensions
  --enable-gcov           Enable coverage testing using gcov

Optional Packages:
  --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
  --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
  --with-pic              try to use only PIC/non-PIC objects [default=use
                          both]
  --with-gnu-ld           assume the C compiler uses GNU ld [default=no]

  --with-tcl=DIR          directory containing tcl configuration
                          (tclConfig.sh)
  --with-readline-lib     specify readline library
  --with-readline-inc     specify readline include paths

Some influential environment variables:
  CC          C compiler command

$as_echo "$as_me: error: configure script is out of date:
 configure \$PACKAGE_VERSION = $PACKAGE_VERSION
 top level VERSION file     = $sqlite_version_sanity_check
please regen with autoconf" >&2;}
   { (exit 1); exit 1; }; }
fi




#########
# Programs needed
#
case `pwd` in
  *\ * | *\	*)
    { $as_echo "$as_me:$LINENO: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&5
$as_echo "$as_me: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&2;} ;;

{ $as_echo "$as_me:$LINENO: checking the name lister ($NM) interface" >&5
$as_echo_n "checking the name lister ($NM) interface... " >&6; }
if test "${lt_cv_nm_interface+set}" = set; then
  $as_echo_n "(cached) " >&6
else
  lt_cv_nm_interface="BSD nm"
  echo "int some_variable = 0;" > conftest.$ac_ext
  (eval echo "\"\$as_me:3727: $ac_compile\"" >&5)
  (eval "$ac_compile" 2>conftest.err)
  cat conftest.err >&5
  (eval echo "\"\$as_me:3730: $NM \\\"conftest.$ac_objext\\\"\"" >&5)
  (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out)
  cat conftest.err >&5
  (eval echo "\"\$as_me:3733: output\"" >&5)
  cat conftest.out >&5
  if $GREP 'External.*some_variable' conftest.out > /dev/null; then
    lt_cv_nm_interface="MS dumpbin"
  fi
  rm -f conftest*
fi
{ $as_echo "$as_me:$LINENO: result: $lt_cv_nm_interface" >&5

	;;
    esac
  fi
  rm -rf conftest*
  ;;
*-*-irix6*)
  # Find out which ABI we are using.
  echo '#line 4955 "configure"' > conftest.$ac_ext
  if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
  (eval $ac_compile) 2>&5
  ac_status=$?
  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
  (exit $ac_status); }; then
    if test "$lt_cv_prog_gnu_ld" = yes; then
      case `/usr/bin/file conftest.$ac_objext` in

   # Note that $ac_compile itself does not contain backslashes and begins
   # with a dollar sign (not a hyphen), so the echo should work correctly.
   # The option is referenced via a variable to avoid confusing sed.
   lt_compile=`echo "$ac_compile" | $SED \
   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
   -e 's:$: $lt_compiler_flag:'`
   (eval echo "\"\$as_me:6824: $lt_compile\"" >&5)
   (eval "$lt_compile" 2>conftest.err)
   ac_status=$?
   cat conftest.err >&5
   echo "$as_me:6828: \$? = $ac_status" >&5
   if (exit $ac_status) && test -s "$ac_outfile"; then
     # The compiler can only warn and ignore the option if not recognized
     # So say no if there are warnings other than the usual output.
     $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
     $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
     if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
       lt_cv_prog_compiler_rtti_exceptions=yes

   # Note that $ac_compile itself does not contain backslashes and begins
   # with a dollar sign (not a hyphen), so the echo should work correctly.
   # The option is referenced via a variable to avoid confusing sed.
   lt_compile=`echo "$ac_compile" | $SED \
   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
   -e 's:$: $lt_compiler_flag:'`
   (eval echo "\"\$as_me:7163: $lt_compile\"" >&5)
   (eval "$lt_compile" 2>conftest.err)
   ac_status=$?
   cat conftest.err >&5
   echo "$as_me:7167: \$? = $ac_status" >&5
   if (exit $ac_status) && test -s "$ac_outfile"; then
     # The compiler can only warn and ignore the option if not recognized
     # So say no if there are warnings other than the usual output.
     $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
     $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
     if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
       lt_cv_prog_compiler_pic_works=yes

   # (2) before a word containing "conftest.", or (3) at the end.
   # Note that $ac_compile itself does not contain backslashes and begins
   # with a dollar sign (not a hyphen), so the echo should work correctly.
   lt_compile=`echo "$ac_compile" | $SED \
   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
   -e 's:$: $lt_compiler_flag:'`
   (eval echo "\"\$as_me:7268: $lt_compile\"" >&5)
   (eval "$lt_compile" 2>out/conftest.err)
   ac_status=$?
   cat out/conftest.err >&5
   echo "$as_me:7272: \$? = $ac_status" >&5
   if (exit $ac_status) && test -s out/conftest2.$ac_objext
   then
     # The compiler can only warn and ignore the option if not recognized
     # So say no if there are warnings
     $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
     $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
     if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then

   # (2) before a word containing "conftest.", or (3) at the end.
   # Note that $ac_compile itself does not contain backslashes and begins
   # with a dollar sign (not a hyphen), so the echo should work correctly.
   lt_compile=`echo "$ac_compile" | $SED \
   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
   -e 's:$: $lt_compiler_flag:'`
   (eval echo "\"\$as_me:7323: $lt_compile\"" >&5)
   (eval "$lt_compile" 2>out/conftest.err)
   ac_status=$?
   cat out/conftest.err >&5
   echo "$as_me:7327: \$? = $ac_status" >&5
   if (exit $ac_status) && test -s out/conftest2.$ac_objext
   then
     # The compiler can only warn and ignore the option if not recognized
     # So say no if there are warnings
     $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
     $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
     if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then

else
  	  if test "$cross_compiling" = yes; then :
  lt_cv_dlopen_self=cross
else
  lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
  lt_status=$lt_dlunknown
  cat > conftest.$ac_ext <<_LT_EOF
#line 10136 "configure"
#include "confdefs.h"

#if HAVE_DLFCN_H
#include <dlfcn.h>
#endif

#include <stdio.h>

else
  	  if test "$cross_compiling" = yes; then :
  lt_cv_dlopen_self_static=cross
else
  lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
  lt_status=$lt_dlunknown
  cat > conftest.$ac_ext <<_LT_EOF
#line 10232 "configure"
#include "confdefs.h"

#if HAVE_DLFCN_H
#include <dlfcn.h>
#endif

#include <stdio.h>

for ac_func in fdatasync gmtime_r isnan localtime_r localtime_s malloc_usabel_size strchrnul usleep utime
do
as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh`
{ $as_echo "$as_me:$LINENO: checking for $ac_func" >&5
$as_echo_n "checking for $ac_func... " >&6; }
if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then
  $as_echo_n "(cached) " >&6
else

VERSION_NUMBER=`cat $srcdir/VERSION \
                           | sed 's/[^0-9]/ /g' \
                | awk '{printf "%d%03d%03d",$1,$2,$3}'`
{ $as_echo "$as_me:$LINENO: Version number set to $VERSION_NUMBER" >&5
$as_echo "$as_me: Version number set to $VERSION_NUMBER" >&6;}









































#########
# Locate a compiler for the build machine.  This compiler should
# generate command-line programs that run on the build machine.
#
if test x"$cross_compiling" = xno; then
	BUILD_CC=$CC
	BUILD_CFLAGS=$CFLAGS

ac_res=$ac_cv_search_pthread_create
if test "$ac_res" != no; then
  test "$ac_res" = "none required" || LIBS="$ac_res $LIBS"

fi

fi


























##########
# Do we want to support release
#
# Check whether --enable-releasemode was given.
if test "${enable_releasemode+set}" = set; then
  enableval=$enable_releasemode;

#########
# See whether we should allow loadable extensions
# Check whether --enable-load-extension was given.
if test "${enable_load_extension+set}" = set; then
  enableval=$enable_load_extension; use_loadextension=$enableval
else
  use_loadextension=yes
fi

if test "${use_loadextension}" = "yes" ; then
  OPT_FEATURE_FLAGS=""
  { $as_echo "$as_me:$LINENO: checking for library containing dlopen" >&5
$as_echo_n "checking for library containing dlopen... " >&6; }
if test "${ac_cv_search_dlopen+set}" = set; then

#        to find <readline.h> on its own, then this can be blank.
#
#    TARGET_EXEEXT
#
#        The filename extension for executables on the
#        target platform.  "" for Unix and ".exe" for windows.
#













# This configure.in file is easy to reuse on other projects.  Just
# change the argument to AC_INIT().  And disable any features that
# you don't need (for example BLT) by erasing or commenting out
# the corresponding code.
#
AC_INIT(sqlite, m4_esyscmd([cat VERSION | tr -d '\n']))

dnl Make sure the local VERSION file matches this configure script
sqlite_version_sanity_check=`cat $srcdir/VERSION | tr -d '\n'`
if test "$PACKAGE_VERSION" != "$sqlite_version_sanity_check" ; then
AC_MSG_ERROR([configure script is out of date:
 configure \$PACKAGE_VERSION = $PACKAGE_VERSION
 top level VERSION file     = $sqlite_version_sanity_check
please regen with autoconf])
fi






#########
# Programs needed
#
AC_PROG_LIBTOOL
AC_PROG_INSTALL
AC_PROG_AWK

#########
# Check for needed/wanted headers
AC_CHECK_HEADERS([sys/types.h stdlib.h stdint.h inttypes.h malloc.h])

#########
# Figure out whether or not we have these functions
#
AC_CHECK_FUNCS([fdatasync gmtime_r isnan localtime_r localtime_s malloc_usabel_size strchrnul usleep utime])

#########
# By default, we use the amalgamation (this may be changed below...)
#
USE_AMALGAMATION=1

#########

AC_SUBST(RELEASE)
VERSION_NUMBER=[`cat $srcdir/VERSION \
                           | sed 's/[^0-9]/ /g' \
                | awk '{printf "%d%03d%03d",$1,$2,$3}'`]
AC_MSG_NOTICE(Version number set to $VERSION_NUMBER)
AC_SUBST(VERSION_NUMBER)




































#########
# Locate a compiler for the build machine.  This compiler should
# generate command-line programs that run on the build machine.
#
if test x"$cross_compiling" = xno; then
	BUILD_CC=$CC
	BUILD_CFLAGS=$CFLAGS

fi
AC_SUBST(BUILD_CC)

##########
# Do we want to support multithreaded use of sqlite
#
AC_ARG_ENABLE(threadsafe, 
AC_HELP_STRING([--disable-threadsafe],[Disable mutexing]),,enable_threadsafe=yes)
AC_MSG_CHECKING([whether to support threadsafe operation])
if test "$enable_threadsafe" = "no"; then
  SQLITE_THREADSAFE=0
  AC_MSG_RESULT([no])
else
  SQLITE_THREADSAFE=1
  AC_MSG_RESULT([yes])
fi
AC_SUBST(SQLITE_THREADSAFE)

if test "$SQLITE_THREADSAFE" = "1"; then
  AC_SEARCH_LIBS(pthread_create, pthread)
fi


















##########
# Do we want to support release
#
AC_ARG_ENABLE(releasemode, 
AC_HELP_STRING([--enable-releasemode],[Support libtool link to release mode]),,enable_releasemode=no)
AC_MSG_CHECKING([whether to support shared library linked as release mode or not])
if test "$enable_releasemode" = "no"; then

if test "${use_amalgamation}" != "yes" ; then
  USE_AMALGAMATION=0
fi
AC_SUBST(USE_AMALGAMATION)

#########
# See whether we should allow loadable extensions
AC_ARG_ENABLE(load-extension, AC_HELP_STRING([--disable-load-extension],
      [Disable loading of external extensions]),
      [use_loadextension=$enableval],[use_loadextension=yes])
if test "${use_loadextension}" = "yes" ; then
  OPT_FEATURE_FLAGS=""
  AC_SEARCH_LIBS(dlopen, dl)
else
  OPT_FEATURE_FLAGS="-DSQLITE_OMIT_LOAD_EXTENSION=1"
fi

  const char *zTerm,              /* Term to select leaves for */
  int nTerm,                      /* Size of term zTerm in bytes */
  const char *zNode,              /* Buffer containing segment interior node */
  int nNode,                      /* Size of buffer at zNode */
  sqlite3_int64 *piLeaf,          /* Selected leaf node */
  sqlite3_int64 *piLeaf2          /* Selected leaf node */
){
  int rc = SQLITE_OK;             /* Return code */
  int iHeight;                    /* Height of this node in tree */

  assert( piLeaf || piLeaf2 );

  fts3GetVarint32(zNode, &iHeight);
  rc = fts3ScanInteriorNode(zTerm, nTerm, zNode, nNode, piLeaf, piLeaf2);
  assert( !piLeaf2 || !piLeaf || rc!=SQLITE_OK || (*piLeaf<=*piLeaf2) );

  if( rc==SQLITE_OK && iHeight>1 ){
    char *zBlob = 0;              /* Blob read from %_segments table */
    int nBlob = 0;                /* Size of zBlob in bytes */

    if( piLeaf && piLeaf2 && (*piLeaf!=*piLeaf2) ){
      rc = sqlite3Fts3ReadBlock(p, *piLeaf, &zBlob, &nBlob, 0);
      if( rc==SQLITE_OK ){
        rc = fts3SelectLeaf(p, zTerm, nTerm, zBlob, nBlob, piLeaf, 0);
      }
      sqlite3_free(zBlob);

static int fts3FilterMethod(
  sqlite3_vtab_cursor *pCursor,   /* The cursor used for this query */
  int idxNum,                     /* Strategy index */
  const char *idxStr,             /* Unused */
  int nVal,                       /* Number of elements in apVal */
  sqlite3_value **apVal           /* Arguments for the indexing scheme */
){
  int rc = SQLITE_OK;
  char *zSql;                     /* SQL statement used to access %_content */
  int eSearch;
  Fts3Table *p = (Fts3Table *)pCursor->pVtab;
  Fts3Cursor *pCsr = (Fts3Cursor *)pCursor;

  sqlite3_value *pCons = 0;       /* The MATCH or rowid constraint, if any */
  sqlite3_value *pLangid = 0;     /* The "langid = ?" constraint, if any */

  sqlite3 *db,                    /* Database connection */
  void *pHash,                    /* Hash table of tokenizers */
  int argc,                       /* Number of elements in argv array */
  const char * const *argv,       /* xCreate/xConnect argument array */
  sqlite3_vtab **ppVtab,          /* OUT: New sqlite3_vtab object */
  char **pzErr                    /* OUT: sqlite3_malloc'd error message */
){
  Fts3tokTable *pTab = 0;
  const sqlite3_tokenizer_module *pMod = 0;
  sqlite3_tokenizer *pTok = 0;
  int rc;
  char **azDequote = 0;
  int nDequote;

  rc = sqlite3_declare_vtab(db, FTS3_TOK_SCHEMA);

      }
      bOk = 1;
    }
    rc = sqlite3_reset(pRange);

    if( bOk ){
      int iIdx = 0;
      sqlite3_stmt *pUpdate1 = 0;
      sqlite3_stmt *pUpdate2 = 0;

      if( rc==SQLITE_OK ){
        rc = fts3SqlStmt(p, SQL_UPDATE_LEVEL_IDX, &pUpdate1, 0);
      }
      if( rc==SQLITE_OK ){
        rc = fts3SqlStmt(p, SQL_UPDATE_LEVEL, &pUpdate2, 0);
      }

}

/* Remove node pOld from the tree.  pOld must be an element of the tree or
** the AVL tree will become corrupt.
*/
static void amatchAvlRemove(amatch_avl **ppHead, amatch_avl *pOld){
  amatch_avl **ppParent;
  amatch_avl *pBalance = 0;
  /* assert( amatchAvlSearch(*ppHead, pOld->zKey)==pOld ); */
  ppParent = amatchAvlFromPtr(pOld, ppHead);
  if( pOld->pBefore==0 && pOld->pAfter==0 ){
    *ppParent = 0;
    pBalance = pOld->pUp;
  }else if( pOld->pBefore && pOld->pAfter ){
    amatch_avl *pX, *pY;

** then this value is always the number of bytes in zB (i.e. strlen(zB)).
** If zA does end in a '*', then it is the number of bytes in the prefix
** of zB that was deemed to match zA.
*/
static int editdist1(const char *zA, const char *zB, int *pnMatch){
  int nA, nB;            /* Number of characters in zA[] and zB[] */
  int xA, xB;            /* Loop counters for zA[] and zB[] */
  char cA = 0, cB;       /* Current character of zA and zB */
  char cAprev, cBprev;   /* Previous character of zA and zB */
  char cAnext, cBnext;   /* Next character in zA and zB */
  int d;                 /* North-west cost value */
  int dc = 0;            /* North-west character value */
  int res;               /* Final result */
  int *m;                /* The cost matrix */
  char *cx;              /* Corresponding character values */

** Functions to deserialize a 16 bit integer, 32 bit real number and
** 64 bit integer. The deserialized value is returned.
*/
static int readInt16(u8 *p){
  return (p[0]<<8) + p[1];
}
static void readCoord(u8 *p, RtreeCoord *pCoord){
  pCoord->u = (
    (((u32)p[0]) << 24) + 
    (((u32)p[1]) << 16) + 
    (((u32)p[2]) <<  8) + 
    (((u32)p[3]) <<  0)
  );

}
static i64 readInt64(u8 *p){
  return (
    (((i64)p[0]) << 56) + 
    (((i64)p[1]) << 48) + 
    (((i64)p[2]) << 40) + 
    (((i64)p[3]) << 32) + 

  p[1] = (i>> 0)&0xFF;
  return 2;
}
static int writeCoord(u8 *p, RtreeCoord *pCoord){
  u32 i;
  assert( sizeof(RtreeCoord)==4 );
  assert( sizeof(u32)==4 );
  i = pCoord->u;
  p[0] = (i>>24)&0xFF;
  p[1] = (i>>16)&0xFF;
  p[2] = (i>> 8)&0xFF;
  p[3] = (i>> 0)&0xFF;
  return 4;
}
static int writeInt64(u8 *p, i64 i){

static void nodeGetCell(
  Rtree *pRtree,               /* The overall R-Tree */
  RtreeNode *pNode,            /* The node containing the cell to be read */
  int iCell,                   /* Index of the cell within the node */
  RtreeCell *pCell             /* OUT: Write the cell contents here */
){
  u8 *pData;

  RtreeCoord *pCoord;
  int ii;
  pCell->iRowid = nodeGetRowid(pRtree, pNode, iCell);
  pData = pNode->zData + (12 + pRtree->nBytesPerCell*iCell);

  pCoord = pCell->aCoord;
  for(ii=0; ii<pRtree->nDim*2; ii++){
    readCoord(&pData[ii*4], &pCoord[ii]);
  }
}


/* Forward declaration for the function that does the work of
** the virtual table module xCreate() and xConnect() methods.
*/

  Rtree *pRtree = (Rtree *)pVtab;
  int rc = SQLITE_OK;
  RtreeCell cell;                 /* New cell to insert if nData>1 */
  int bHaveRowid = 0;             /* Set to 1 after new rowid is determined */

  rtreeReference(pRtree);
  assert(nData>=1);

  cell.iRowid = 0;  /* Used only to suppress a compiler warning */

  /* Constraint handling. A write operation on an r-tree table may return
  ** SQLITE_CONSTRAINT for two reasons:
  **
  **   1. A duplicate rowid value, or
  **   2. The supplied data violates the "x2>=x1" constraint.
  **

  $(TOP)/src/malloc.c \
  $(TOP)/src/mem0.c \
  $(TOP)/src/mem1.c \
  $(TOP)/src/mem2.c \
  $(TOP)/src/mem3.c \
  $(TOP)/src/mem5.c \
  $(TOP)/src/memjournal.c \
  $(TOP)/src/msvc.h \
  $(TOP)/src/mutex.c \
  $(TOP)/src/mutex.h \
  $(TOP)/src/mutex_noop.c \
  $(TOP)/src/mutex_unix.c \
  $(TOP)/src/mutex_w32.c \
  $(TOP)/src/notify.c \
  $(TOP)/src/os.c \

#
HDR = \
   $(TOP)/src/btree.h \
   $(TOP)/src/btreeInt.h \
   $(TOP)/src/hash.h \
   $(TOP)/src/hwtime.h \
   keywordhash.h \
   $(TOP)/src/msvc.h \
   $(TOP)/src/mutex.h \
   opcodes.h \
   $(TOP)/src/os.h \
   $(TOP)/src/os_common.h \
   $(TOP)/src/os_setup.h \
   $(TOP)/src/os_win.h \
   $(TOP)/src/pager.h \

static const char * const azCompileOpt[] = {

/* These macros are provided to "stringify" the value of the define
** for those options in which the value is meaningful. */
#define CTIMEOPT_VAL_(opt) #opt
#define CTIMEOPT_VAL(opt) CTIMEOPT_VAL_(opt)

#if SQLITE_32BIT_ROWID
  "32BIT_ROWID",
#endif
#if SQLITE_4_BYTE_ALIGNED_MALLOC
  "4_BYTE_ALIGNED_MALLOC",
#endif
#if SQLITE_CASE_SENSITIVE_LIKE
  "CASE_SENSITIVE_LIKE",
#endif
#if SQLITE_CHECK_PAGES
  "CHECK_PAGES",
#endif
#if SQLITE_COVERAGE_TEST
  "COVERAGE_TEST",
#endif
#if SQLITE_DEBUG
  "DEBUG",
#endif
#if SQLITE_DEFAULT_LOCKING_MODE
  "DEFAULT_LOCKING_MODE=" CTIMEOPT_VAL(SQLITE_DEFAULT_LOCKING_MODE),
#endif
#if defined(SQLITE_DEFAULT_MMAP_SIZE) && !defined(SQLITE_DEFAULT_MMAP_SIZE_xc)
  "DEFAULT_MMAP_SIZE=" CTIMEOPT_VAL(SQLITE_DEFAULT_MMAP_SIZE),
#endif
#if SQLITE_DISABLE_DIRSYNC
  "DISABLE_DIRSYNC",
#endif
#if SQLITE_DISABLE_LFS
  "DISABLE_LFS",
#endif
#if SQLITE_ENABLE_API_ARMOR
  "ENABLE_API_ARMOR",
#endif
#if SQLITE_ENABLE_ATOMIC_WRITE
  "ENABLE_ATOMIC_WRITE",
#endif
#if SQLITE_ENABLE_CEROD
  "ENABLE_CEROD",
#endif
#if SQLITE_ENABLE_COLUMN_METADATA
  "ENABLE_COLUMN_METADATA",
#endif
#if SQLITE_ENABLE_EXPENSIVE_ASSERT
  "ENABLE_EXPENSIVE_ASSERT",
#endif
#if SQLITE_ENABLE_FTS1
  "ENABLE_FTS1",
#endif
#if SQLITE_ENABLE_FTS2
  "ENABLE_FTS2",
#endif
#if SQLITE_ENABLE_FTS3
  "ENABLE_FTS3",
#endif
#if SQLITE_ENABLE_FTS3_PARENTHESIS
  "ENABLE_FTS3_PARENTHESIS",
#endif
#if SQLITE_ENABLE_FTS4
  "ENABLE_FTS4",
#endif
#if SQLITE_ENABLE_ICU
  "ENABLE_ICU",
#endif
#if SQLITE_ENABLE_IOTRACE
  "ENABLE_IOTRACE",
#endif
#if SQLITE_ENABLE_LOAD_EXTENSION
  "ENABLE_LOAD_EXTENSION",
#endif
#if SQLITE_ENABLE_LOCKING_STYLE
  "ENABLE_LOCKING_STYLE=" CTIMEOPT_VAL(SQLITE_ENABLE_LOCKING_STYLE),
#endif
#if SQLITE_ENABLE_MEMORY_MANAGEMENT
  "ENABLE_MEMORY_MANAGEMENT",
#endif
#if SQLITE_ENABLE_MEMSYS3
  "ENABLE_MEMSYS3",
#endif
#if SQLITE_ENABLE_MEMSYS5
  "ENABLE_MEMSYS5",
#endif
#if SQLITE_ENABLE_OVERSIZE_CELL_CHECK
  "ENABLE_OVERSIZE_CELL_CHECK",
#endif
#if SQLITE_ENABLE_RTREE
  "ENABLE_RTREE",
#endif
#if defined(SQLITE_ENABLE_STAT4)
  "ENABLE_STAT4",
#elif defined(SQLITE_ENABLE_STAT3)
  "ENABLE_STAT3",
#endif
#if SQLITE_ENABLE_UNLOCK_NOTIFY
  "ENABLE_UNLOCK_NOTIFY",
#endif
#if SQLITE_ENABLE_UPDATE_DELETE_LIMIT
  "ENABLE_UPDATE_DELETE_LIMIT",
#endif
#if SQLITE_HAS_CODEC
  "HAS_CODEC",
#endif
#if HAVE_ISNAN || SQLITE_HAVE_ISNAN
  "HAVE_ISNAN",
#endif
#if SQLITE_HOMEGROWN_RECURSIVE_MUTEX
  "HOMEGROWN_RECURSIVE_MUTEX",
#endif
#if SQLITE_IGNORE_AFP_LOCK_ERRORS
  "IGNORE_AFP_LOCK_ERRORS",
#endif
#if SQLITE_IGNORE_FLOCK_LOCK_ERRORS
  "IGNORE_FLOCK_LOCK_ERRORS",
#endif
#ifdef SQLITE_INT64_TYPE
  "INT64_TYPE",
#endif
#if SQLITE_LOCK_TRACE
  "LOCK_TRACE",
#endif
#if defined(SQLITE_MAX_MMAP_SIZE) && !defined(SQLITE_MAX_MMAP_SIZE_xc)
  "MAX_MMAP_SIZE=" CTIMEOPT_VAL(SQLITE_MAX_MMAP_SIZE),
#endif
#ifdef SQLITE_MAX_SCHEMA_RETRY
  "MAX_SCHEMA_RETRY=" CTIMEOPT_VAL(SQLITE_MAX_SCHEMA_RETRY),
#endif
#if SQLITE_MEMDEBUG
  "MEMDEBUG",
#endif
#if SQLITE_MIXED_ENDIAN_64BIT_FLOAT
  "MIXED_ENDIAN_64BIT_FLOAT",
#endif
#if SQLITE_NO_SYNC
  "NO_SYNC",
#endif
#if SQLITE_OMIT_ALTERTABLE
  "OMIT_ALTERTABLE",
#endif
#if SQLITE_OMIT_ANALYZE
  "OMIT_ANALYZE",
#endif
#if SQLITE_OMIT_ATTACH
  "OMIT_ATTACH",
#endif
#if SQLITE_OMIT_AUTHORIZATION
  "OMIT_AUTHORIZATION",
#endif
#if SQLITE_OMIT_AUTOINCREMENT
  "OMIT_AUTOINCREMENT",
#endif
#if SQLITE_OMIT_AUTOINIT
  "OMIT_AUTOINIT",
#endif
#if SQLITE_OMIT_AUTOMATIC_INDEX
  "OMIT_AUTOMATIC_INDEX",
#endif
#if SQLITE_OMIT_AUTORESET
  "OMIT_AUTORESET",
#endif
#if SQLITE_OMIT_AUTOVACUUM
  "OMIT_AUTOVACUUM",
#endif
#if SQLITE_OMIT_BETWEEN_OPTIMIZATION
  "OMIT_BETWEEN_OPTIMIZATION",
#endif
#if SQLITE_OMIT_BLOB_LITERAL
  "OMIT_BLOB_LITERAL",
#endif
#if SQLITE_OMIT_BTREECOUNT
  "OMIT_BTREECOUNT",
#endif
#if SQLITE_OMIT_BUILTIN_TEST
  "OMIT_BUILTIN_TEST",
#endif
#if SQLITE_OMIT_CAST
  "OMIT_CAST",
#endif
#if SQLITE_OMIT_CHECK
  "OMIT_CHECK",
#endif
#if SQLITE_OMIT_COMPLETE
  "OMIT_COMPLETE",
#endif
#if SQLITE_OMIT_COMPOUND_SELECT
  "OMIT_COMPOUND_SELECT",
#endif
#if SQLITE_OMIT_CTE
  "OMIT_CTE",
#endif
#if SQLITE_OMIT_DATETIME_FUNCS
  "OMIT_DATETIME_FUNCS",
#endif
#if SQLITE_OMIT_DECLTYPE
  "OMIT_DECLTYPE",
#endif
#if SQLITE_OMIT_DEPRECATED
  "OMIT_DEPRECATED",
#endif
#if SQLITE_OMIT_DISKIO
  "OMIT_DISKIO",
#endif
#if SQLITE_OMIT_EXPLAIN
  "OMIT_EXPLAIN",
#endif
#if SQLITE_OMIT_FLAG_PRAGMAS
  "OMIT_FLAG_PRAGMAS",
#endif
#if SQLITE_OMIT_FLOATING_POINT
  "OMIT_FLOATING_POINT",
#endif
#if SQLITE_OMIT_FOREIGN_KEY
  "OMIT_FOREIGN_KEY",
#endif
#if SQLITE_OMIT_GET_TABLE
  "OMIT_GET_TABLE",
#endif
#if SQLITE_OMIT_INCRBLOB
  "OMIT_INCRBLOB",
#endif
#if SQLITE_OMIT_INTEGRITY_CHECK
  "OMIT_INTEGRITY_CHECK",
#endif
#if SQLITE_OMIT_LIKE_OPTIMIZATION
  "OMIT_LIKE_OPTIMIZATION",
#endif
#if SQLITE_OMIT_LOAD_EXTENSION
  "OMIT_LOAD_EXTENSION",
#endif
#if SQLITE_OMIT_LOCALTIME
  "OMIT_LOCALTIME",
#endif
#if SQLITE_OMIT_LOOKASIDE
  "OMIT_LOOKASIDE",
#endif
#if SQLITE_OMIT_MEMORYDB
  "OMIT_MEMORYDB",
#endif
#if SQLITE_OMIT_OR_OPTIMIZATION
  "OMIT_OR_OPTIMIZATION",
#endif
#if SQLITE_OMIT_PAGER_PRAGMAS
  "OMIT_PAGER_PRAGMAS",
#endif
#if SQLITE_OMIT_PRAGMA
  "OMIT_PRAGMA",
#endif
#if SQLITE_OMIT_PROGRESS_CALLBACK
  "OMIT_PROGRESS_CALLBACK",
#endif
#if SQLITE_OMIT_QUICKBALANCE
  "OMIT_QUICKBALANCE",
#endif
#if SQLITE_OMIT_REINDEX
  "OMIT_REINDEX",
#endif
#if SQLITE_OMIT_SCHEMA_PRAGMAS
  "OMIT_SCHEMA_PRAGMAS",
#endif
#if SQLITE_OMIT_SCHEMA_VERSION_PRAGMAS
  "OMIT_SCHEMA_VERSION_PRAGMAS",
#endif
#if SQLITE_OMIT_SHARED_CACHE
  "OMIT_SHARED_CACHE",
#endif
#if SQLITE_OMIT_SUBQUERY
  "OMIT_SUBQUERY",
#endif
#if SQLITE_OMIT_TCL_VARIABLE
  "OMIT_TCL_VARIABLE",
#endif
#if SQLITE_OMIT_TEMPDB
  "OMIT_TEMPDB",
#endif
#if SQLITE_OMIT_TRACE
  "OMIT_TRACE",
#endif
#if SQLITE_OMIT_TRIGGER
  "OMIT_TRIGGER",
#endif
#if SQLITE_OMIT_TRUNCATE_OPTIMIZATION
  "OMIT_TRUNCATE_OPTIMIZATION",
#endif
#if SQLITE_OMIT_UTF16
  "OMIT_UTF16",
#endif
#if SQLITE_OMIT_VACUUM
  "OMIT_VACUUM",
#endif
#if SQLITE_OMIT_VIEW
  "OMIT_VIEW",
#endif
#if SQLITE_OMIT_VIRTUALTABLE
  "OMIT_VIRTUALTABLE",
#endif
#if SQLITE_OMIT_WAL
  "OMIT_WAL",
#endif
#if SQLITE_OMIT_WSD
  "OMIT_WSD",
#endif
#if SQLITE_OMIT_XFER_OPT
  "OMIT_XFER_OPT",
#endif
#if SQLITE_PERFORMANCE_TRACE
  "PERFORMANCE_TRACE",
#endif
#if SQLITE_PROXY_DEBUG
  "PROXY_DEBUG",
#endif
#if SQLITE_RTREE_INT_ONLY
  "RTREE_INT_ONLY",
#endif
#if SQLITE_SECURE_DELETE
  "SECURE_DELETE",
#endif
#if SQLITE_SMALL_STACK
  "SMALL_STACK",
#endif
#if SQLITE_SOUNDEX
  "SOUNDEX",
#endif
#if SQLITE_SYSTEM_MALLOC
  "SYSTEM_MALLOC",
#endif
#if SQLITE_TCL
  "TCL",
#endif
#if defined(SQLITE_TEMP_STORE) && !defined(SQLITE_TEMP_STORE_xc)
  "TEMP_STORE=" CTIMEOPT_VAL(SQLITE_TEMP_STORE),
#endif
#if SQLITE_TEST
  "TEST",
#endif
#if defined(SQLITE_THREADSAFE)
  "THREADSAFE=" CTIMEOPT_VAL(SQLITE_THREADSAFE),
#endif
#if SQLITE_USE_ALLOCA
  "USE_ALLOCA",
#endif
#if SQLITE_USER_AUTHENTICATION
  "USER_AUTHENTICATION",
#endif
#if SQLITE_WIN32_MALLOC
  "WIN32_MALLOC",
#endif
#if SQLITE_ZERO_MALLOC
  "ZERO_MALLOC"
#endif
};

/*
** Given the name of a compile-time option, return true if that option
** was used and false if not.
**
** The name can optionally begin with "SQLITE_" but the "SQLITE_" prefix
** is not required for a match.
*/
int sqlite3_compileoption_used(const char *zOptName){
  int i, n;

#if SQLITE_ENABLE_API_ARMOR
  if( zOptName==0 ){
    (void)SQLITE_MISUSE_BKPT;
    return 0;
  }
#endif
  if( sqlite3StrNICmp(zOptName, "SQLITE_", 7)==0 ) zOptName += 7;
  n = sqlite3Strlen30(zOptName);

**
** See http://msdn.microsoft.com/en-us/library/a442x3ye(VS.80).aspx.
**
** If the user has not indicated to use localtime_r() or localtime_s()
** already, check for an MSVC build environment that provides 
** localtime_s().
*/
#if !HAVE_LOCALTIME_R && !HAVE_LOCALTIME_S \
    && defined(_MSC_VER) && defined(_CRT_INSECURE_DEPRECATE)
#undef  HAVE_LOCALTIME_S
#define HAVE_LOCALTIME_S 1
#endif

#ifndef SQLITE_OMIT_LOCALTIME
/*
** The following routine implements the rough equivalent of localtime_r()
** using whatever operating-system specific localtime facility that
** is available.  This routine returns 0 on success and
** non-zero on any kind of error.
**
** If the sqlite3GlobalConfig.bLocaltimeFault variable is true then this
** routine will always fail.
**
** EVIDENCE-OF: R-62172-00036 In this implementation, the standard C
** library function localtime_r() is used to assist in the calculation of
** local time.
*/
static int osLocaltime(time_t *t, struct tm *pTm){
  int rc;
#if !HAVE_LOCALTIME_R && !HAVE_LOCALTIME_S

  struct tm *pX;
#if SQLITE_THREADSAFE>0
  sqlite3_mutex *mutex = sqlite3MutexAlloc(SQLITE_MUTEX_STATIC_MASTER);
#endif
  sqlite3_mutex_enter(mutex);
  pX = localtime(t);
#ifndef SQLITE_OMIT_BUILTIN_TEST
  if( sqlite3GlobalConfig.bLocaltimeFault ) pX = 0;
#endif
  if( pX ) *pTm = *pX;
  sqlite3_mutex_leave(mutex);
  rc = pX==0;
#else
#ifndef SQLITE_OMIT_BUILTIN_TEST
  if( sqlite3GlobalConfig.bLocaltimeFault ) return 1;
#endif
#if HAVE_LOCALTIME_R
  rc = localtime_r(t, pTm)==0;
#else
  rc = localtime_s(pTm, t);
#endif /* HAVE_LOCALTIME_R */
#endif /* HAVE_LOCALTIME_R || HAVE_LOCALTIME_S */
  return rc;
}

  sqlite3_value **argv
){
  DateTime x;
  u64 n;
  size_t i,j;
  char *z;
  sqlite3 *db;
  const char *zFmt;
  char zBuf[100];
  if( argc==0 ) return;
  zFmt = (const char*)sqlite3_value_text(argv[0]);
  if( zFmt==0 || isDate(context, argc-1, argv+1, &x) ) return;
  db = sqlite3_context_db_handle(context);
  for(i=0, n=1; zFmt[i]; i++, n++){
    if( zFmt[i]=='%' ){
      switch( zFmt[i+1] ){
        case 'd':
        case 'H':

  UNUSED_PARAMETER(argc);
  UNUSED_PARAMETER(argv);

  iT = sqlite3StmtCurrentTime(context);
  if( iT<=0 ) return;
  t = iT/1000 - 10000*(sqlite3_int64)21086676;
#if HAVE_GMTIME_R
  pTm = gmtime_r(&t, &sNow);
#else
  sqlite3_mutex_enter(sqlite3MutexAlloc(SQLITE_MUTEX_STATIC_MASTER));
  pTm = gmtime(&t);
  if( pTm ) memcpy(&sNow, pTm, sizeof(sNow));
  sqlite3_mutex_leave(sqlite3MutexAlloc(SQLITE_MUTEX_STATIC_MASTER));
#endif

  Vdbe *v;               /* The virtual database engine */
  Table *pTab;           /* The table from which records will be deleted */
  const char *zDb;       /* Name of database holding pTab */
  int i;                 /* Loop counter */
  WhereInfo *pWInfo;     /* Information about the WHERE clause */
  Index *pIdx;           /* For looping over indices of the table */
  int iTabCur;           /* Cursor number for the table */
  int iDataCur = 0;      /* VDBE cursor for the canonical data source */
  int iIdxCur = 0;       /* Cursor number of the first index */
  int nIdx;              /* Number of indices */
  sqlite3 *db;           /* Main database structure */
  AuthContext sContext;  /* Authorization context */
  NameContext sNC;       /* Name context to resolve expressions in */
  int iDb;               /* Database number */
  int memCnt = -1;       /* Memory cell used for change counting */
  int rcauth;            /* Value returned by authorization callback */

  Parse *pParse,          /* Parsing context */
  int op,                 /* Expression opcode */
  Expr *pLeft,            /* Left operand */
  Expr *pRight,           /* Right operand */
  const Token *pToken     /* Argument token */
){
  Expr *p;
  if( op==TK_AND && pLeft && pRight && pParse->nErr==0 ){
    /* Take advantage of short-circuit false optimization for AND */
    p = sqlite3ExprAnd(pParse->db, pLeft, pRight);
  }else{
    p = sqlite3ExprAlloc(pParse->db, op, pToken, 1);
    sqlite3ExprAttachSubtrees(pParse->db, p, pLeft, pRight);
  }
  if( p ) {

  ** TK_COLUMNs have not yet been converted into TK_AGG_COLUMN.  If
  ** sqlite3FunctionUsesThisSrc() is used differently in the future, the
  ** NEVER() will need to be removed. */
  if( pExpr->op==TK_COLUMN || NEVER(pExpr->op==TK_AGG_COLUMN) ){
    int i;
    struct SrcCount *p = pWalker->u.pSrcCount;
    SrcList *pSrc = p->pSrc;
    int nSrc = pSrc ? pSrc->nSrc : 0;
    for(i=0; i<nSrc; i++){
      if( pExpr->iTable==pSrc->a[i].iCursor ) break;
    }
    if( i<nSrc ){
      p->nThis++;
    }else{
      p->nOther++;
    }
  }
  return WRC_Continue;
}

** an integer number of milliseconds passed in as the first
** argument.
*/
static int sqliteDefaultBusyCallback(
 void *ptr,               /* Database connection */
 int count                /* Number of times table has been busy */
){
#if SQLITE_OS_WIN || HAVE_USLEEP
  static const u8 delays[] =
     { 1, 2, 5, 10, 15, 20, 25, 25,  25,  50,  50, 100 };
  static const u8 totals[] =
     { 0, 1, 3,  8, 18, 33, 53, 78, 103, 128, 178, 228 };
# define NDELAY ArraySize(delays)
  sqlite3 *db = (sqlite3 *)ptr;
  int timeout = db->busyTimeout;

  int *pPrimaryKey,           /* OUTPUT: True if column part of PK */
  int *pAutoinc               /* OUTPUT: True if column is auto-increment */
){
  int rc;
  char *zErrMsg = 0;
  Table *pTab = 0;
  Column *pCol = 0;
  int iCol = 0;

  char const *zDataType = 0;
  char const *zCollSeq = 0;
  int notnull = 0;
  int primarykey = 0;
  int autoinc = 0;

#define SQLITE_FREE(x)               free(x)
#define SQLITE_REALLOC(x,y)          realloc((x),(y))

/*
** The malloc.h header file is needed for malloc_usable_size() function
** on some systems (e.g. Linux).
*/
#if HAVE_MALLOC_H && HAVE_MALLOC_USABLE_SIZE
#  define SQLITE_USE_MALLOC_H 1
#  define SQLITE_USE_MALLOC_USABLE_SIZE 1
/*
** The MSVCRT has malloc_usable_size(), but it is called _msize().  The
** use of _msize() is automatic, but can be disabled by compiling with
** -DSQLITE_WITHOUT_MSIZE.  Using the _msize() function also requires
** the malloc.h header file.
*/
#elif defined(_MSC_VER) && !defined(SQLITE_WITHOUT_MSIZE)

/*
** 2015 January 12
**
** The author disclaims copyright to this source code.  In place of
** a legal notice, here is a blessing:
**
**    May you do good and not evil.
**    May you find forgiveness for yourself and forgive others.
**    May you share freely, never taking more than you give.
**
******************************************************************************
**
** This file contains code that is specific to MSVC.
*/
#ifndef _MSVC_H_
#define _MSVC_H_

#if defined(_MSC_VER)
#pragma warning(disable : 4054)
#pragma warning(disable : 4055)
#pragma warning(disable : 4100)
#pragma warning(disable : 4127)
#pragma warning(disable : 4152)
#pragma warning(disable : 4189)
#pragma warning(disable : 4206)
#pragma warning(disable : 4210)
#pragma warning(disable : 4232)
#pragma warning(disable : 4244)
#pragma warning(disable : 4305)
#pragma warning(disable : 4306)
#pragma warning(disable : 4702)
#pragma warning(disable : 4706)
#endif /* defined(_MSC_VER) */

#endif /* _MSVC_H_ */

int sqlite3_fullsync_count = 0;
#endif

/*
** We do not trust systems to provide a working fdatasync().  Some do.
** Others do no.  To be safe, we will stick with the (slightly slower)
** fsync(). If you know that your system does support fdatasync() correctly,
** then simply compile with -Dfdatasync=fdatasync or -DHAVE_FDATASYNC
*/
#if !defined(fdatasync) && !HAVE_FDATASYNC
# define fdatasync fsync
#endif

/*
** Define HAVE_FULLFSYNC to 0 or 1 depending on whether or not
** the F_FULLFSYNC macro is defined.  F_FULLFSYNC is currently
** only available on Mac OS X.  But that could change.

  u8 eCreate;                         /* eCreate value for for xFetch() */
  int (*xStress)(void*,PgHdr*);       /* Call to try make a page clean */
  void *pStress;                      /* Argument to xStress */
  sqlite3_pcache *pCache;             /* Pluggable cache module */
  PgHdr *pPage1;                      /* Reference to page 1 */
};













/********************************** Linked List Management ********************/

/* Allowed values for second argument to pcacheManageDirtyList() */
#define PCACHE_DIRTYLIST_REMOVE   1    /* Remove pPage from dirty list */
#define PCACHE_DIRTYLIST_ADD      2    /* Add pPage to the dirty list */
#define PCACHE_DIRTYLIST_FRONT    3    /* Move pPage to the front of the list */

){
  char *zLeft = 0;       /* Nul-terminated UTF-8 string <id> */
  char *zRight = 0;      /* Nul-terminated UTF-8 string <value>, or NULL */
  const char *zDb = 0;   /* The database name */
  Token *pId;            /* Pointer to <id> token */
  char *aFcntl[4];       /* Argument to SQLITE_FCNTL_PRAGMA */
  int iDb;               /* Database index for <database> */
  int lwr, upr, mid = 0;       /* Binary search bounds */
  int rc;                      /* return value form SQLITE_FCNTL_PRAGMA */
  sqlite3 *db = pParse->db;    /* The database connection */
  Db *pDb;                     /* The specific database being pragmaed */
  Vdbe *v = sqlite3GetVdbe(pParse);  /* Prepared statement */

  if( v==0 ) return;
  sqlite3VdbeRunOnlyOnce(v);

**
** This file contains code for a set of "printf"-like routines.  These
** routines format strings much like the printf() from the standard C
** library, though the implementation here has enhancements to support
** SQLlite.
*/
#include "sqliteInt.h"












/*
** Conversion types fall into various categories as defined by the
** following enumeration.
*/
#define etRADIX       1 /* Integer types.  %d, %x, %o, and so forth */
#define etFLOAT       2 /* Floating point.  %f */

** utility for accessing SQLite databases.
*/
#if (defined(_WIN32) || defined(WIN32)) && !defined(_CRT_SECURE_NO_WARNINGS)
/* This needs to come before any includes for MSVC compiler */
#define _CRT_SECURE_NO_WARNINGS
#endif

/*
** If requested, include the SQLite compiler options file for MSVC.
*/
#if defined(INCLUDE_MSVC_H)
#include "msvc.h"
#endif

/*
** Enable large-file support for fopen() and friends on unix.
*/
#ifndef SQLITE_DISABLE_LFS
# define _LARGE_FILE       1
# ifndef _FILE_OFFSET_BITS
#   define _FILE_OFFSET_BITS 64

# if !defined(__RTP__) && !defined(_WRS_KERNEL)
#  include <pwd.h>
# endif
# include <unistd.h>
# include <sys/types.h>
#endif

#if HAVE_READLINE
# include <readline/readline.h>
# include <readline/history.h>
#endif
#if HAVE_EDITLINE
# undef HAVE_READLINE


# define HAVE_READLINE 1
# include <editline/readline.h>
#endif
#if !HAVE_READLINE
# define add_history(X)
# define read_history(X)
# define write_history(X)
# define stifle_history(X)
#endif

#if defined(_WIN32) || defined(WIN32)

static char *one_input_line(FILE *in, char *zPrior, int isContinuation){
  char *zPrompt;
  char *zResult;
  if( in!=0 ){
    zResult = local_getline(zPrior, in);
  }else{
    zPrompt = isContinuation ? continuePrompt : mainPrompt;
#if HAVE_READLINE
    free(zPrior);
    zResult = readline(zPrompt);
    if( zResult && *zResult ) add_history(zResult);
#else
    printf("%s", zPrompt);
    fflush(stdout);
    zResult = local_getline(zPrior, stdin);

  FILE *traceOut;        /* Output for sqlite3_trace() */
  int nErr;              /* Number of errors seen */
  int mode;              /* An output mode setting */
  int writableSchema;    /* True if PRAGMA writable_schema=ON */
  int showHeader;        /* True to show column names in List or Column mode */
  unsigned shellFlgs;    /* Various flags */
  char *zDestTable;      /* Name of destination table when MODE_Insert */
  char colSeparator[20]; /* Column separator character for several modes */
  char rowSeparator[20]; /* Row separator character for MODE_Ascii */
  int colWidth[100];     /* Requested width of each column when in column mode*/
  int actualWidth[100];  /* Actual width of each column */
  char nullValue[20];    /* The text to print when a NULL comes back from
                         ** the database */
  SavedModeInfo normalMode;/* Holds the mode just before .explain ON */
  char outfile[FILENAME_MAX]; /* Filename for *out */
  const char *zDbFilename;    /* name of the database file */
  char *zFreeOnClose;         /* Filename to free when closing */
  const char *zVfs;           /* Name of VFS to use */
  sqlite3_stmt *pStmt;   /* Current statement if any. */

#define MODE_List     2  /* One record per line with a separator */
#define MODE_Semi     3  /* Same as MODE_List but append ";" to each line */
#define MODE_Html     4  /* Generate an XHTML table */
#define MODE_Insert   5  /* Generate SQL "insert" statements */
#define MODE_Tcl      6  /* Generate ANSI-C or TCL quoted elements */
#define MODE_Csv      7  /* Quote strings, numbers are plain */
#define MODE_Explain  8  /* Like MODE_Column, but do not truncate data */
#define MODE_Ascii    9  /* Use ASCII unit and record separators (0x1F/0x1E) */

static const char *modeDescr[] = {
  "line",
  "column",
  "list",
  "semi",
  "html",
  "insert",
  "tcl",
  "csv",
  "explain",
  "ascii",
};

/*
** These are the column/row/line separators used by the various
** import/export modes.
*/
#define SEP_Column    "|"
#define SEP_Row       "\n"
#define SEP_Tab       "\t"
#define SEP_Space     " "
#define SEP_Comma     ","
#define SEP_CrLf      "\r\n"
#define SEP_Unit      "\x1F"
#define SEP_Record    "\x1E"

/*
** Number of elements in an array
*/
#define ArraySize(X)  (int)(sizeof(X)/sizeof(X[0]))

/*
** Compute a string length that is limited to what can be stored in

  1, 1, 1, 1, 1, 1, 1, 1,   1, 1, 1, 1, 1, 1, 1, 1,   
  1, 1, 1, 1, 1, 1, 1, 1,   1, 1, 1, 1, 1, 1, 1, 1,   
  1, 1, 1, 1, 1, 1, 1, 1,   1, 1, 1, 1, 1, 1, 1, 1,   
  1, 1, 1, 1, 1, 1, 1, 1,   1, 1, 1, 1, 1, 1, 1, 1,   
};

/*
** Output a single term of CSV.  Actually, p->colSeparator is used for
** the separator, which may or may not be a comma.  p->nullValue is
** the null value.  Strings are quoted if necessary.  The separator
** is only issued if bSep is true.
*/
static void output_csv(ShellState *p, const char *z, int bSep){
  FILE *out = p->out;
  if( z==0 ){
    fprintf(out,"%s",p->nullValue);
  }else{
    int i;
    int nSep = strlen30(p->colSeparator);
    for(i=0; z[i]; i++){
      if( needCsvQuote[((unsigned char*)z)[i]] 
         || (z[i]==p->colSeparator[0] && 
             (nSep==1 || memcmp(z, p->colSeparator, nSep)==0)) ){
        i = 0;
        break;
      }
    }
    if( i==0 ){
      putc('"', out);
      for(i=0; z[i]; i++){
        if( z[i]=='"' ) putc('"', out);
        putc(z[i], out);
      }
      putc('"', out);
    }else{
      fprintf(out, "%s", z);
    }
  }
  if( bSep ){
    fprintf(p->out, "%s", p->colSeparator);
  }
}

#ifdef SIGINT
/*
** This routine runs when the user presses Ctrl-C
*/

    case MODE_Line: {
      int w = 5;
      if( azArg==0 ) break;
      for(i=0; i<nArg; i++){
        int len = strlen30(azCol[i] ? azCol[i] : "");
        if( len>w ) w = len;
      }
      if( p->cnt++>0 ) fprintf(p->out, "%s", p->rowSeparator);
      for(i=0; i<nArg; i++){
        fprintf(p->out,"%*s = %s%s", w, azCol[i],
                azArg[i] ? azArg[i] : p->nullValue, p->rowSeparator);
      }
      break;
    }
    case MODE_Explain:
    case MODE_Column: {
      if( p->cnt++==0 ){
        for(i=0; i<nArg; i++){
          int w, n;
          if( i<ArraySize(p->colWidth) ){
            w = p->colWidth[i];
          }else{
            w = 0;
          }
          if( w==0 ){
            w = strlen30(azCol[i] ? azCol[i] : "");
            if( w<10 ) w = 10;
            n = strlen30(azArg && azArg[i] ? azArg[i] : p->nullValue);
            if( w<n ) w = n;
          }
          if( i<ArraySize(p->actualWidth) ){
            p->actualWidth[i] = w;
          }
          if( p->showHeader ){
            if( w<0 ){
              fprintf(p->out,"%*.*s%s",-w,-w,azCol[i],
                      i==nArg-1 ? p->rowSeparator : "  ");
            }else{
              fprintf(p->out,"%-*.*s%s",w,w,azCol[i],
                      i==nArg-1 ? p->rowSeparator : "  ");
            }
          }
        }
        if( p->showHeader ){
          for(i=0; i<nArg; i++){
            int w;
            if( i<ArraySize(p->actualWidth) ){
               w = p->actualWidth[i];
               if( w<0 ) w = -w;
            }else{
               w = 10;
            }
            fprintf(p->out,"%-*.*s%s",w,w,"-----------------------------------"
                   "----------------------------------------------------------",
                    i==nArg-1 ? p->rowSeparator : "  ");
          }
        }
      }
      if( azArg==0 ) break;
      for(i=0; i<nArg; i++){
        int w;
        if( i<ArraySize(p->actualWidth) ){

          if( p->iIndent<p->nIndent ){
            fprintf(p->out, "%*.s", p->aiIndent[p->iIndent], "");
          }
          p->iIndent++;
        }
        if( w<0 ){
          fprintf(p->out,"%*.*s%s",-w,-w,
              azArg[i] ? azArg[i] : p->nullValue,
              i==nArg-1 ? p->rowSeparator : "  ");
        }else{
          fprintf(p->out,"%-*.*s%s",w,w,
              azArg[i] ? azArg[i] : p->nullValue,
              i==nArg-1 ? p->rowSeparator : "  ");
        }
      }
      break;
    }
    case MODE_Semi:
    case MODE_List: {
      if( p->cnt++==0 && p->showHeader ){
        for(i=0; i<nArg; i++){
          fprintf(p->out,"%s%s",azCol[i],
                  i==nArg-1 ? p->rowSeparator : p->colSeparator);
        }
      }
      if( azArg==0 ) break;
      for(i=0; i<nArg; i++){
        char *z = azArg[i];
        if( z==0 ) z = p->nullValue;
        fprintf(p->out, "%s", z);
        if( i<nArg-1 ){
          fprintf(p->out, "%s", p->colSeparator);
        }else if( p->mode==MODE_Semi ){
          fprintf(p->out, ";%s", p->rowSeparator);
        }else{
          fprintf(p->out, "%s", p->rowSeparator);
        }
      }
      break;
    }
    case MODE_Html: {
      if( p->cnt++==0 && p->showHeader ){
        fprintf(p->out,"<TR>");
        for(i=0; i<nArg; i++){
          fprintf(p->out,"<TH>");
          output_html_string(p->out, azCol[i]);
          fprintf(p->out,"</TH>\n");
        }
        fprintf(p->out,"</TR>\n");
      }
      if( azArg==0 ) break;
      fprintf(p->out,"<TR>");
      for(i=0; i<nArg; i++){
        fprintf(p->out,"<TD>");
        output_html_string(p->out, azArg[i] ? azArg[i] : p->nullValue);
        fprintf(p->out,"</TD>\n");
      }
      fprintf(p->out,"</TR>\n");
      break;
    }
    case MODE_Tcl: {
      if( p->cnt++==0 && p->showHeader ){
        for(i=0; i<nArg; i++){
          output_c_string(p->out,azCol[i] ? azCol[i] : "");
          if(i<nArg-1) fprintf(p->out, "%s", p->colSeparator);
        }
        fprintf(p->out, "%s", p->rowSeparator);
      }
      if( azArg==0 ) break;
      for(i=0; i<nArg; i++){
        output_c_string(p->out, azArg[i] ? azArg[i] : p->nullValue);
        if(i<nArg-1) fprintf(p->out, "%s", p->colSeparator);
      }
      fprintf(p->out, "%s", p->rowSeparator);
      break;
    }
    case MODE_Csv: {
#if defined(WIN32) || defined(_WIN32)
      fflush(p->out);
      _setmode(_fileno(p->out), _O_BINARY);
#endif
      if( p->cnt++==0 && p->showHeader ){
        for(i=0; i<nArg; i++){
          output_csv(p, azCol[i] ? azCol[i] : "", i<nArg-1);
        }
        fprintf(p->out, "%s", p->rowSeparator);
      }
      if( nArg>0 ){
        for(i=0; i<nArg; i++){
          output_csv(p, azArg[i], i<nArg-1);
        }
        fprintf(p->out, "%s", p->rowSeparator);
      }
#if defined(WIN32) || defined(_WIN32)
      fflush(p->out);
      _setmode(_fileno(p->out), _O_TEXT);
#endif
      break;
    }

        }else{
          if( zSep[0] ) fprintf(p->out,"%s",zSep);
          output_quoted_string(p->out, azArg[i]);
        }
      }
      fprintf(p->out,");\n");
      break;
    }
    case MODE_Ascii: {
      if( p->cnt++==0 && p->showHeader ){
        for(i=0; i<nArg; i++){
          if( i>0 ) fprintf(p->out, "%s", p->colSeparator);
          fprintf(p->out,"%s",azCol[i] ? azCol[i] : "");
        }
        fprintf(p->out, "%s", p->rowSeparator);
      }
      if( azArg==0 ) break;
      for(i=0; i<nArg; i++){
        if( i>0 ) fprintf(p->out, "%s", p->colSeparator);
        fprintf(p->out,"%s",azArg[i] ? azArg[i] : p->nullValue);
      }
      fprintf(p->out, "%s", p->rowSeparator);
      break;
    }
  }
  return 0;
}

/*
** This is the callback routine that the SQLite library

  ".iotrace FILE          Enable I/O diagnostic logging to FILE\n"
#endif
#ifndef SQLITE_OMIT_LOAD_EXTENSION
  ".load FILE ?ENTRY?     Load an extension library\n"
#endif
  ".log FILE|off          Turn logging on or off.  FILE can be stderr/stdout\n"
  ".mode MODE ?TABLE?     Set output mode where MODE is one of:\n"
  "                         ascii    Columns/rows delimited by 0x1F and 0x1E\n"
  "                         csv      Comma-separated values\n"
  "                         column   Left-aligned columns.  (See .width)\n"
  "                         html     HTML <table> code\n"
  "                         insert   SQL insert statements for TABLE\n"
  "                         line     One value per line\n"
  "                         list     Values delimited by .separator strings\n"
  "                         tabs     Tab-separated values\n"
  "                         tcl      TCL list elements\n"
  ".nullvalue STRING      Use STRING in place of NULL values\n"
  ".once FILENAME         Output for the next SQL command only to FILENAME\n"
  ".open ?FILENAME?       Close existing database and reopen FILENAME\n"
  ".output ?FILENAME?     Send output to FILENAME or stdout\n"
  ".print STRING...       Print literal STRING\n"
  ".prompt MAIN CONTINUE  Replace the standard prompts\n"
  ".quit                  Exit this program\n"
  ".read FILENAME         Execute SQL in FILENAME\n"
  ".restore ?DB? FILE     Restore content of DB (default \"main\") from FILE\n"
  ".save FILE             Write in-memory database into FILE\n"
  ".scanstats on|off      Turn sqlite3_stmt_scanstatus() metrics on or off\n"
  ".schema ?TABLE?        Show the CREATE statements\n"
  "                         If TABLE specified, only show tables matching\n"
  "                         LIKE pattern TABLE.\n"
  ".separator COL ?ROW?   Change the column separator and optionally the row\n"
  "                         separator for both the output mode and .import\n"
#if defined(SQLITE_ENABLE_SESSION)
  ".session CMD ...       Create or control sessions\n"
#endif
  ".shell CMD ARGS...     Run CMD ARGS... in a system shell\n"
  ".show                  Show the current values for various settings\n"
  ".stats on|off          Turn stats on or off\n"
  ".system CMD ARGS...    Run CMD ARGS... in a system shell\n"

*/
static void test_breakpoint(void){
  static int nCall = 0;
  nCall++;
}

/*
** An object used to read a CSV and other files for import.
*/
typedef struct ImportCtx ImportCtx;
struct ImportCtx {
  const char *zFile;  /* Name of the input file */
  FILE *in;           /* Read the CSV text from this input stream */
  char *z;            /* Accumulated text for a field */
  int n;              /* Number of bytes in z */
  int nAlloc;         /* Space allocated for z[] */
  int nLine;          /* Current line number */
  int cTerm;          /* Character that terminated the most recent field */
  int cColSep;        /* The column separator character.  (Usually ",") */
  int cRowSep;        /* The row separator character.  (Usually "\n") */
};

/* Append a single byte to z[] */
static void import_append_char(ImportCtx *p, int c){
  if( p->n+1>=p->nAlloc ){
    p->nAlloc += p->nAlloc + 100;
    p->z = sqlite3_realloc(p->z, p->nAlloc);
    if( p->z==0 ){
      fprintf(stderr, "out of memory\n");
      exit(1);
    }
  }
  p->z[p->n++] = (char)c;
}

/* Read a single field of CSV text.  Compatible with rfc4180 and extended
** with the option of having a separator other than ",".
**
**   +  Input comes from p->in.
**   +  Store results in p->z of length p->n.  Space to hold p->z comes
**      from sqlite3_malloc().
**   +  Use p->cSep as the column separator.  The default is ",".
**   +  Use p->rSep as the row separator.  The default is "\n".
**   +  Keep track of the line number in p->nLine.
**   +  Store the character that terminates the field in p->cTerm.  Store
**      EOF on end-of-file.
**   +  Report syntax errors on stderr
*/
static char *csv_read_one_field(ImportCtx *p){
  int c;
  int cSep = p->cColSep;
  int rSep = p->cRowSep;
  p->n = 0;
  c = fgetc(p->in);
  if( c==EOF || seenInterrupt ){
    p->cTerm = EOF;
    return 0;
  }
  if( c=='"' ){
    int pc, ppc;
    int startLine = p->nLine;
    int cQuote = c;
    pc = ppc = 0;
    while( 1 ){
      c = fgetc(p->in);
      if( c==rSep ) p->nLine++;
      if( c==cQuote ){
        if( pc==cQuote ){
          pc = 0;
          continue;
        }
      }
      if( (c==cSep && pc==cQuote)
       || (c==rSep && pc==cQuote)
       || (c==rSep && pc=='\r' && ppc==cQuote)
       || (c==EOF && pc==cQuote)
      ){
        do{ p->n--; }while( p->z[p->n]!=cQuote );
        p->cTerm = c;
        break;
      }
      if( pc==cQuote && c!='\r' ){
        fprintf(stderr, "%s:%d: unescaped %c character\n",
                p->zFile, p->nLine, cQuote);
      }
      if( c==EOF ){
        fprintf(stderr, "%s:%d: unterminated %c-quoted field\n",
                p->zFile, startLine, cQuote);
        p->cTerm = c;
        break;
      }
      import_append_char(p, c);
      ppc = pc;
      pc = c;
    }
  }else{
    while( c!=EOF && c!=cSep && c!=rSep ){
      import_append_char(p, c);
      c = fgetc(p->in);
    }
    if( c==rSep ){
      p->nLine++;
      if( p->n>0 && p->z[p->n-1]=='\r' ) p->n--;
    }
    p->cTerm = c;
  }
  if( p->z ) p->z[p->n] = 0;
  return p->z;
}

/* Read a single field of ASCII delimited text.
**
**   +  Input comes from p->in.
**   +  Store results in p->z of length p->n.  Space to hold p->z comes
**      from sqlite3_malloc().
**   +  Use p->cSep as the column separator.  The default is "\x1F".
**   +  Use p->rSep as the row separator.  The default is "\x1E".
**   +  Keep track of the row number in p->nLine.
**   +  Store the character that terminates the field in p->cTerm.  Store
**      EOF on end-of-file.
**   +  Report syntax errors on stderr
*/
static char *ascii_read_one_field(ImportCtx *p){
  int c;
  int cSep = p->cColSep;
  int rSep = p->cRowSep;
  p->n = 0;
  c = fgetc(p->in);
  if( c==EOF || seenInterrupt ){
    p->cTerm = EOF;
    return 0;
  }
  while( c!=EOF && c!=cSep && c!=rSep ){
    import_append_char(p, c);
    c = fgetc(p->in);
  }
  if( c==rSep ){
    p->nLine++;
  }
  p->cTerm = c;
  if( p->z ) p->z[p->n] = 0;
  return p->z;
}

/*
** Try to transfer data for table zTable.  If an error is seen while
** moving forward, try to go backwards.  The backwards movement won't
** work for WITHOUT ROWID tables.
*/
static void tryToCloneData(

    char *zTable;               /* Insert data into this table */
    char *zFile;                /* Name of file to extra content from */
    sqlite3_stmt *pStmt = NULL; /* A statement */
    int nCol;                   /* Number of columns in the table */
    int nByte;                  /* Number of bytes in an SQL string */
    int i, j;                   /* Loop counters */
    int needCommit;             /* True to COMMIT or ROLLBACK at end */
    int nSep;                   /* Number of bytes in p->colSeparator[] */
    char *zSql;                 /* An SQL statement */
    ImportCtx sCtx;             /* Reader context */
    char *(*xRead)(ImportCtx*); /* Procedure to read one value */
    int (*xCloser)(FILE*);      /* Procedure to close th3 connection */

    if( nArg!=3 ){
      fprintf(stderr, "Usage: .import FILE TABLE\n");
      goto meta_command_exit;
    }
    zFile = azArg[1];
    zTable = azArg[2];
    seenInterrupt = 0;
    memset(&sCtx, 0, sizeof(sCtx));
    open_db(p, 0);
    nSep = strlen30(p->colSeparator);
    if( nSep==0 ){
      fprintf(stderr, "Error: non-null column separator required for import\n");
      return 1;
    }
    if( nSep>1 ){
      fprintf(stderr, "Error: multi-character column separators not allowed"
                      " for import\n");
      return 1;
    }
    nSep = strlen30(p->rowSeparator);
    if( nSep==0 ){
      fprintf(stderr, "Error: non-null row separator required for import\n");
      return 1;
    }
    if( nSep==2 && p->mode==MODE_Csv && strcmp(p->rowSeparator, SEP_CrLf)==0 ){
      /* When importing CSV (only), if the row separator is set to the
      ** default output row separator, change it to the default input
      ** row separator.  This avoids having to maintain different input
      ** and output row separators. */
      sqlite3_snprintf(sizeof(p->rowSeparator), p->rowSeparator, SEP_Row);
      nSep = strlen30(p->rowSeparator);
    }
    if( nSep>1 ){
      fprintf(stderr, "Error: multi-character row separators not allowed"
                      " for import\n");
      return 1;
    }
    sCtx.zFile = zFile;
    sCtx.nLine = 1;
    if( sCtx.zFile[0]=='|' ){
      sCtx.in = popen(sCtx.zFile+1, "r");
      sCtx.zFile = "<pipe>";
      xCloser = pclose;
    }else{
      sCtx.in = fopen(sCtx.zFile, "rb");
      xCloser = fclose;
    }
    if( p->mode==MODE_Ascii ){
      xRead = ascii_read_one_field;
    }else{
      xRead = csv_read_one_field;
    }
    if( sCtx.in==0 ){
      fprintf(stderr, "Error: cannot open \"%s\"\n", zFile);
      return 1;
    }
    sCtx.cColSep = p->colSeparator[0];
    sCtx.cRowSep = p->rowSeparator[0];
    zSql = sqlite3_mprintf("SELECT * FROM %s", zTable);
    if( zSql==0 ){
      fprintf(stderr, "Error: out of memory\n");
      xCloser(sCtx.in);
      return 1;
    }
    nByte = strlen30(zSql);
    rc = sqlite3_prepare_v2(p->db, zSql, -1, &pStmt, 0);
    import_append_char(&sCtx, 0);    /* To ensure sCtx.z is allocated */
    if( rc && sqlite3_strglob("no such table: *", sqlite3_errmsg(db))==0 ){
      char *zCreate = sqlite3_mprintf("CREATE TABLE %s", zTable);
      char cSep = '(';
      while( xRead(&sCtx) ){
        zCreate = sqlite3_mprintf("%z%c\n  \"%s\" TEXT", zCreate, cSep, sCtx.z);
        cSep = ',';
        if( sCtx.cTerm!=sCtx.cColSep ) break;
      }
      if( cSep=='(' ){
        sqlite3_free(zCreate);
        sqlite3_free(sCtx.z);
        xCloser(sCtx.in);
        fprintf(stderr,"%s: empty file\n", sCtx.zFile);
        return 1;
      }
      zCreate = sqlite3_mprintf("%z\n)", zCreate);
      rc = sqlite3_exec(p->db, zCreate, 0, 0, 0);
      sqlite3_free(zCreate);
      if( rc ){
        fprintf(stderr, "CREATE TABLE %s(...) failed: %s\n", zTable,
                sqlite3_errmsg(db));
        sqlite3_free(sCtx.z);
        xCloser(sCtx.in);
        return 1;
      }
      rc = sqlite3_prepare_v2(p->db, zSql, -1, &pStmt, 0);
    }
    sqlite3_free(zSql);
    if( rc ){
      if (pStmt) sqlite3_finalize(pStmt);
      fprintf(stderr,"Error: %s\n", sqlite3_errmsg(db));
      xCloser(sCtx.in);
      return 1;
    }
    nCol = sqlite3_column_count(pStmt);
    sqlite3_finalize(pStmt);
    pStmt = 0;
    if( nCol==0 ) return 0; /* no columns, no error */
    zSql = sqlite3_malloc( nByte*2 + 20 + nCol*2 );
    if( zSql==0 ){
      fprintf(stderr, "Error: out of memory\n");
      xCloser(sCtx.in);
      return 1;
    }
    sqlite3_snprintf(nByte+20, zSql, "INSERT INTO \"%w\" VALUES(?", zTable);
    j = strlen30(zSql);
    for(i=1; i<nCol; i++){
      zSql[j++] = ',';
      zSql[j++] = '?';
    }
    zSql[j++] = ')';
    zSql[j] = 0;
    rc = sqlite3_prepare_v2(p->db, zSql, -1, &pStmt, 0);
    sqlite3_free(zSql);
    if( rc ){
      fprintf(stderr, "Error: %s\n", sqlite3_errmsg(db));
      if (pStmt) sqlite3_finalize(pStmt);
      xCloser(sCtx.in);
      return 1;
    }
    needCommit = sqlite3_get_autocommit(db);
    if( needCommit ) sqlite3_exec(db, "BEGIN", 0, 0, 0);
    do{
      int startLine = sCtx.nLine;
      for(i=0; i<nCol; i++){
        char *z = xRead(&sCtx);
        /*
        ** Did we reach end-of-file before finding any columns?
        ** If so, stop instead of NULL filling the remaining columns.
        */
        if( z==0 && i==0 ) break;
        /*
        ** Did we reach end-of-file OR end-of-line before finding any
        ** columns in ASCII mode?  If so, stop instead of NULL filling
        ** the remaining columns.
        */
        if( p->mode==MODE_Ascii && (z==0 || z[0]==0) && i==0 ) break;
        sqlite3_bind_text(pStmt, i+1, z, -1, SQLITE_TRANSIENT);
        if( i<nCol-1 && sCtx.cTerm!=sCtx.cColSep ){
          fprintf(stderr, "%s:%d: expected %d columns but found %d - "
                          "filling the rest with NULL\n",
                          sCtx.zFile, startLine, nCol, i+1);
          i++;
          while( i<=nCol ){ sqlite3_bind_null(pStmt, i); i++; }
        }
      }
      if( sCtx.cTerm==sCtx.cColSep ){
        do{
          xRead(&sCtx);
          i++;
        }while( sCtx.cTerm==sCtx.cColSep );
        fprintf(stderr, "%s:%d: expected %d columns but found %d - "
                        "extras ignored\n",
                        sCtx.zFile, startLine, nCol, i);
      }
      if( i>=nCol ){
        sqlite3_step(pStmt);
        rc = sqlite3_reset(pStmt);
        if( rc!=SQLITE_OK ){
          fprintf(stderr, "%s:%d: INSERT failed: %s\n", sCtx.zFile, startLine,
                  sqlite3_errmsg(db));
        }
      }
    }while( sCtx.cTerm!=EOF );

    xCloser(sCtx.in);
    sqlite3_free(sCtx.z);
    sqlite3_finalize(pStmt);
    if( needCommit ) sqlite3_exec(db, "COMMIT", 0, 0, 0);
  }else

  if( c=='i' && strncmp(azArg[0], "indices", n)==0 ){
    ShellState data;
    char *zErrMsg = 0;

      p->mode = MODE_Column;
    }else if( c2=='l' && n2>2 && strncmp(azArg[1],"list",n2)==0 ){
      p->mode = MODE_List;
    }else if( c2=='h' && strncmp(azArg[1],"html",n2)==0 ){
      p->mode = MODE_Html;
    }else if( c2=='t' && strncmp(azArg[1],"tcl",n2)==0 ){
      p->mode = MODE_Tcl;
      sqlite3_snprintf(sizeof(p->colSeparator), p->colSeparator, SEP_Space);
    }else if( c2=='c' && strncmp(azArg[1],"csv",n2)==0 ){
      p->mode = MODE_Csv;
      sqlite3_snprintf(sizeof(p->colSeparator), p->colSeparator, SEP_Comma);
      sqlite3_snprintf(sizeof(p->rowSeparator), p->rowSeparator, SEP_CrLf);
    }else if( c2=='t' && strncmp(azArg[1],"tabs",n2)==0 ){
      p->mode = MODE_List;
      sqlite3_snprintf(sizeof(p->colSeparator), p->colSeparator, SEP_Tab);
    }else if( c2=='i' && strncmp(azArg[1],"insert",n2)==0 ){
      p->mode = MODE_Insert;
      set_table_name(p, nArg>=3 ? azArg[2] : "table");
    }else if( c2=='a' && strncmp(azArg[1],"ascii",n2)==0 ){
      p->mode = MODE_Ascii;
      sqlite3_snprintf(sizeof(p->colSeparator), p->colSeparator, SEP_Unit);
      sqlite3_snprintf(sizeof(p->rowSeparator), p->rowSeparator, SEP_Record);
    }else {
      fprintf(stderr,"Error: mode should be one of: "
         "ascii column csv html insert line list tabs tcl\n");
      rc = 1;
    }
  }else

  if( c=='n' && strncmp(azArg[0], "nullvalue", n)==0 ){
    if( nArg==2 ){
      sqlite3_snprintf(sizeof(p->nullValue), p->nullValue,
                       "%.*s", (int)ArraySize(p->nullValue)-1, azArg[1]);
    }else{
      fprintf(stderr, "Usage: .nullvalue STRING\n");
      rc = 1;
    }
  }else

  if( c=='o' && strncmp(azArg[0], "open", n)==0 && n>=2 ){

      }
    }
  }else
#endif

  if( c=='s' && strncmp(azArg[0], "separator", n)==0 ){
    if( nArg<2 || nArg>3 ){
      fprintf(stderr, "Usage: .separator COL ?ROW?\n");
      rc = 1;
    }
    if( nArg>=2 ){
      sqlite3_snprintf(sizeof(p->colSeparator), p->colSeparator,
                       "%.*s", (int)ArraySize(p->colSeparator)-1, azArg[1]);
    }
    if( nArg>=3 ){
      sqlite3_snprintf(sizeof(p->rowSeparator), p->rowSeparator,
                       "%.*s", (int)ArraySize(p->rowSeparator)-1, azArg[2]);
    }
  }else

  if( c=='s'
   && (strncmp(azArg[0], "shell", n)==0 || strncmp(azArg[0],"system",n)==0)
  ){
    char *zCmd;

  if( c=='s' && strncmp(azArg[0], "show", n)==0 ){
    int i;
    if( nArg!=1 ){
      fprintf(stderr, "Usage: .show\n");
      rc = 1;
      goto meta_command_exit;
    }
    fprintf(p->out,"%12.12s: %s\n","echo", p->echoOn ? "on" : "off");
    fprintf(p->out,"%12.12s: %s\n","eqp", p->autoEQP ? "on" : "off");
    fprintf(p->out,"%9.9s: %s\n","explain", p->normalMode.valid ? "on" :"off");
    fprintf(p->out,"%12.12s: %s\n","headers", p->showHeader ? "on" : "off");
    fprintf(p->out,"%12.12s: %s\n","mode", modeDescr[p->mode]);
    fprintf(p->out,"%12.12s: ", "nullvalue");
      output_c_string(p->out, p->nullValue);
      fprintf(p->out, "\n");
    fprintf(p->out,"%12.12s: %s\n","output",
            strlen30(p->outfile) ? p->outfile : "stdout");
    fprintf(p->out,"%12.12s: ", "colseparator");
      output_c_string(p->out, p->colSeparator);
      fprintf(p->out, "\n");
    fprintf(p->out,"%12.12s: ", "rowseparator");
      output_c_string(p->out, p->rowSeparator);
      fprintf(p->out, "\n");
    fprintf(p->out,"%12.12s: %s\n","stats", p->statsOn ? "on" : "off");
    fprintf(p->out,"%12.12s: ","width");
    for (i=0;i<(int)ArraySize(p->colWidth) && p->colWidth[i] != 0;i++) {
      fprintf(p->out,"%d ",p->colWidth[i]);
    }
    fprintf(p->out,"\n");
  }else

  if( c=='s' && strncmp(azArg[0], "stats", n)==0 ){

  return rc;
}

/*
** Show available command line options
*/
static const char zOptions[] = 
  "   -ascii               set output mode to 'ascii'\n"
  "   -bail                stop after hitting an error\n"
  "   -batch               force batch I/O\n"
  "   -column              set output mode to 'column'\n"
  "   -cmd COMMAND         run \"COMMAND\" before reading stdin\n"
  "   -csv                 set output mode to 'csv'\n"
  "   -echo                print commands before execution\n"
  "   -init FILENAME       read/process named file\n"

  "   -line                set output mode to 'line'\n"
  "   -list                set output mode to 'list'\n"
  "   -lookaside SIZE N    use N entries of SZ bytes for lookaside memory\n"
  "   -mmap N              default mmap size set to N\n"
#ifdef SQLITE_ENABLE_MULTIPLEX
  "   -multiplex           enable the multiplexor VFS\n"
#endif
  "   -newline SEP         set output row separator. Default: '\\n'\n"
  "   -nullvalue TEXT      set text string for NULL values. Default ''\n"
  "   -pagecache SIZE N    use N slots of SZ bytes each for page cache memory\n"
  "   -scratch SIZE N      use N slots of SZ bytes each for scratch memory\n"
  "   -separator SEP       set output column separator. Default: '|'\n"
  "   -stats               print memory stats before each finalize\n"
  "   -version             show SQLite version\n"
  "   -vfs NAME            use NAME as the default VFS\n"
#ifdef SQLITE_ENABLE_VFSTRACE
  "   -vfstrace            enable tracing of all VFS calls\n"
#endif
;

/*
** Initialize the state information in data
*/
static void main_init(ShellState *data) {
  memset(data, 0, sizeof(*data));
  data->mode = MODE_List;
  memcpy(data->colSeparator,SEP_Column, 2);
  memcpy(data->rowSeparator,SEP_Row, 2);
  data->showHeader = 0;
  data->shellFlgs = SHFLG_Lookaside;
  sqlite3_config(SQLITE_CONFIG_URI, 1);
  sqlite3_config(SQLITE_CONFIG_LOG, shellLog, data);
  sqlite3_config(SQLITE_CONFIG_MULTITHREAD);
  sqlite3_snprintf(sizeof(mainPrompt), mainPrompt,"sqlite> ");
  sqlite3_snprintf(sizeof(continuePrompt), continuePrompt,"   ...> ");

      data.mode = MODE_List;
    }else if( strcmp(z,"-line")==0 ){
      data.mode = MODE_Line;
    }else if( strcmp(z,"-column")==0 ){
      data.mode = MODE_Column;
    }else if( strcmp(z,"-csv")==0 ){
      data.mode = MODE_Csv;
      memcpy(data.colSeparator,",",2);
    }else if( strcmp(z,"-ascii")==0 ){
      data.mode = MODE_Ascii;
      sqlite3_snprintf(sizeof(data.colSeparator), data.colSeparator,
                       SEP_Unit);
      sqlite3_snprintf(sizeof(data.rowSeparator), data.rowSeparator,
                       SEP_Record);
    }else if( strcmp(z,"-separator")==0 ){
      sqlite3_snprintf(sizeof(data.colSeparator), data.colSeparator,
                       "%s",cmdline_option_value(argc,argv,++i));
    }else if( strcmp(z,"-newline")==0 ){
      sqlite3_snprintf(sizeof(data.rowSeparator), data.rowSeparator,
                       "%s",cmdline_option_value(argc,argv,++i));
    }else if( strcmp(z,"-nullvalue")==0 ){
      sqlite3_snprintf(sizeof(data.nullValue), data.nullValue,
                       "%s",cmdline_option_value(argc,argv,++i));
    }else if( strcmp(z,"-header")==0 ){
      data.showHeader = 1;
    }else if( strcmp(z,"-noheader")==0 ){
      data.showHeader = 0;
    }else if( strcmp(z,"-echo")==0 ){
      data.echoOn = 1;

      zHome = find_home_dir();
      if( zHome ){
        nHistory = strlen30(zHome) + 20;
        if( (zHistory = malloc(nHistory))!=0 ){
          sqlite3_snprintf(nHistory, zHistory,"%s/.sqlite_history", zHome);
        }
      }
#if HAVE_READLINE
      if( zHistory ) read_history(zHistory);
#endif
      rc = process_input(&data, 0);
      if( zHistory ){
        stifle_history(100);
        write_history(zHistory);
        free(zHistory);

** CAPI3REF: Prepared Statement Scan Status Opcodes
** KEYWORDS: {scanstatus options}
**
** The following constants can be used for the T parameter to the
** [sqlite3_stmt_scanstatus(S,X,T,V)] interface.  Each constant designates a
** different metric for sqlite3_stmt_scanstatus() to return.
**
** When the value returned to V is a string, space to hold that string is
** managed by the prepared statement S and will be automatically freed when
** S is finalized.
**
** <dl>
** [[SQLITE_SCANSTAT_NLOOP]] <dt>SQLITE_SCANSTAT_NLOOP</dt>
** <dd>^The [sqlite3_int64] variable pointed to by the T parameter will be
** set to the total number of times that the X-th loop has run.</dd>
**
** [[SQLITE_SCANSTAT_NVISIT]] <dt>SQLITE_SCANSTAT_NVISIT</dt>
** <dd>^The [sqlite3_int64] variable pointed to by the T parameter will be set

#define SQLITE_SCANSTAT_NAME     3
#define SQLITE_SCANSTAT_EXPLAIN  4
#define SQLITE_SCANSTAT_SELECTID 5

/*
** CAPI3REF: Prepared Statement Scan Status
**
** This interface returns information about the predicted and measured
** performance for pStmt.  Advanced applications can use this
** interface to compare the predicted and the measured performance and
** issue warnings and/or rerun [ANALYZE] if discrepancies are found.
**
** Since this interface is expected to be rarely used, it is only
** available if SQLite is compiled using the [SQLITE_ENABLE_STMT_SCANSTATUS]
** compile-time option.
**
** The "iScanStatusOp" parameter determines which status information to return.
** The "iScanStatusOp" must be one of the [scanstatus options] or the behavior
** of this interface is undefined.
** ^The requested measurement is written into a variable pointed to by
** the "pOut" parameter.
** Parameter "idx" identifies the specific loop to retrieve statistics for.
** Loops are numbered starting from zero. ^If idx is out of range - less than
** zero or greater than or equal to the total number of loops used to implement
** the statement - a non-zero value is returned and the variable that pOut
** points to is unchanged.
**
** ^Statistics might not be available for all loops in all statements. ^In cases
** where there exist loops with no available statistics, this function behaves
** as if the loop did not exist - it returns non-zero and leave the variable
** that pOut points to unchanged.
**



** See also: [sqlite3_stmt_scanstatus_reset()]
*/
SQLITE_EXPERIMENTAL int sqlite3_stmt_scanstatus(
  sqlite3_stmt *pStmt,      /* Prepared statement for which info desired */
  int idx,                  /* Index of loop to report on */
  int iScanStatusOp,        /* Information desired.  SQLITE_SCANSTAT_* */
  void *pOut                /* Result written here */

*************************************************************************
** Internal interface definitions for SQLite.
**
*/
#ifndef _SQLITEINT_H_
#define _SQLITEINT_H_

/*
** Include the header file used to customize the compiler options for MSVC.
** This should be done first so that it can successfully prevent spurious
** compiler warnings due to subsequent content in this file and other files
** that are included by this file.
*/
#include "msvc.h"

/*
** These #defines should enable >2GB file support on POSIX if the
** underlying operating system supports it.  If the OS lacks
** large file support, or if the OS is windows, these should be no-ops.
**
** Ticket #2739:  The _LARGEFILE_SOURCE macro must appear before any
** system #includes.  Hence, this block of code must be the very first

/*
** FTS4 is really an extension for FTS3.  It is enabled using the
** SQLITE_ENABLE_FTS3 macro.  But to avoid confusion we also call
** the SQLITE_ENABLE_FTS4 macro to serve as an alias for SQLITE_ENABLE_FTS3.
*/
#if defined(SQLITE_ENABLE_FTS4) && !defined(SQLITE_ENABLE_FTS3)
# define SQLITE_ENABLE_FTS3 1
#endif

/*
** The ctype.h header is needed for non-ASCII systems.  It is also
** needed by FTS3 when FTS3 is included in the amalgamation.
*/
#if !defined(SQLITE_ASCII) || \

**                        generating MD5 checksums:  md5, md5file,
**                        md5-10x8, and md5file-10x8.
**
**  -DSQLITE_TEST         When used in conjuction with -DTCLSH=1, add
**                        hundreds of new commands used for testing
**                        SQLite.  This option implies -DSQLITE_TCLMD5.
*/

/*
** If requested, include the SQLite compiler options file for MSVC.
*/
#if defined(INCLUDE_MSVC_H)
#include "msvc.h"
#endif

#include "tcl.h"
#include <errno.h>

/*
** Some additional include files are needed if this file is not
** appended to the amalgamation.
*/

static int dbPrepareAndBind(
  SqliteDb *pDb,                  /* Database object */
  char const *zIn,                /* SQL to compile */
  char const **pzOut,             /* OUT: Pointer to next SQL statement */
  SqlPreparedStmt **ppPreStmt     /* OUT: Object used to cache statement */
){
  const char *zSql = zIn;         /* Pointer to first SQL statement in zIn */
  sqlite3_stmt *pStmt = 0;        /* Prepared statement object */
  SqlPreparedStmt *pPreStmt;      /* Pointer to cached statement */
  int nSql;                       /* Length of zSql in bytes */
  int nVar = 0;                   /* Number of variables in statement */
  int iParm = 0;                  /* Next free entry in apParm */
  char c;
  int i;
  Tcl_Interp *interp = pDb->interp;

  *ppPreStmt = 0;

** if the extension only supplies one new name!)  The "sqlite" command is
** used to open a new SQLite database.  See the DbMain() routine above
** for additional information.
**
** The EXTERN macros are required by TCL in order to work on windows.
*/
EXTERN int Sqlite3_Init(Tcl_Interp *interp){
  int rc = Tcl_InitStubs(interp, "8.4", 0) ? TCL_OK : TCL_ERROR;
  if( rc==TCL_OK ){
    Tcl_CreateObjCommand(interp, "sqlite3", (Tcl_ObjCmdProc*)DbMain, 0, 0);
#ifndef SQLITE_3_SUFFIX_ONLY
    /* The "sqlite" alias is undocumented.  It is here only to support
    ** legacy scripts.  All new scripts should use only the "sqlite3"
    ** command. */
    Tcl_CreateObjCommand(interp, "sqlite", (Tcl_ObjCmdProc*)DbMain, 0, 0);

#ifdef SQLITE_SSE
    Sqlitetestsse_Init(interp);
#endif
  }
#endif
}

/* Needed for the setrlimit() system call on unix */
#if defined(unix)
#include <sys/resource.h>
#endif

#define TCLSH_MAIN main   /* Needed to fake out mktclapp */
int TCLSH_MAIN(int argc, char **argv){
  Tcl_Interp *interp;

#if !defined(_WIN32_WCE)
  if( getenv("BREAK") ){
    fprintf(stderr,
        "attach debugger to process %d and press any key to continue.\n",
        GETPID());
    fgetc(stdin);
  }
#endif

  /* Since the primary use case for this binary is testing of SQLite,
  ** be sure to generate core files if we crash */
#if defined(SQLITE_TEST) && defined(unix)
  { struct rlimit x;
    getrlimit(RLIMIT_CORE, &x);
    x.rlim_cur = x.rlim_max;
    setrlimit(RLIMIT_CORE, &x);
  }
#endif /* SQLITE_TEST && unix */


  /* Call sqlite3_shutdown() once before doing anything else. This is to
  ** test that sqlite3_shutdown() can be safely called by a process before
  ** sqlite3_initialize() is. */
  sqlite3_shutdown();

  Tcl_FindExecutable(argv[0]);

  int argc,              /* Number of arguments */
  char **argv            /* Text of each argument */
){
  sqlite3 *db;
  Tcl_DString str;
  int rc;
  char *zErr = 0;
  int nRow = 0, nCol = 0;
  char **aResult;
  int i;
  char zBuf[30];
  char *zSql;
  int resCount = -1;
  if( argc==5 ){
    if( Tcl_GetInt(interp, argv[4], &resCount) ) return TCL_ERROR;

static int test_stmt_status(
  void * clientData,
  Tcl_Interp *interp,
  int objc,
  Tcl_Obj *CONST objv[]
){
  int iValue;
  int i, op = 0, resetFlag;
  const char *zOpName;
  sqlite3_stmt *pStmt;

  static const struct {
    const char *zName;
    int op;
  } aOp[] = {

  void * clientData,
  Tcl_Interp *interp,
  int objc,
  Tcl_Obj *CONST objv[]
){
  sqlite3_stmt *pStmt;
  int idx;
  double value = 0;
  int rc;
  const char *zVal;
  int i;
  static const struct {
    const char *zName;     /* Name of the special floating point value */
    unsigned int iUpper;   /* Upper 32 bits */
    unsigned int iLower;   /* Lower 32 bits */

    { "SQLITE_LIMIT_TRIGGER_DEPTH",       SQLITE_LIMIT_TRIGGER_DEPTH        },
    { "SQLITE_LIMIT_WORKER_THREADS",      SQLITE_LIMIT_WORKER_THREADS       },
    
    /* Out of range test cases */
    { "SQLITE_LIMIT_TOOSMALL",            -1,                               },
    { "SQLITE_LIMIT_TOOBIG",              SQLITE_LIMIT_WORKER_THREADS+1     },
  };
  int i, id = 0;
  int val;
  const char *zId;

  if( objc!=4 ){
    Tcl_AppendResult(interp, "wrong # args: should be \"",
        Tcl_GetStringFromObj(objv[0], 0), " DB ID VALUE", 0);
    return TCL_ERROR;

** warning.  This is used to verify that errors and warnings output by those
** tools are detected by the test scripts.
**
**       TYPE       BEHAVIOR
**       1          Overflow a signed integer
**       2          Jump based on an uninitialized variable
**       3          Read after free
**       4          Panic
*/
static int test_bad_behavior(
  ClientData clientData, /* Pointer to an integer containing zero */
  Tcl_Interp *interp,    /* The TCL interpreter that invoked this command */
  int objc,              /* Number of arguments */
  Tcl_Obj *CONST objv[]  /* Command arguments */
){

    }
    case 3: {
      a = malloc( sizeof(int)*10 );
      for(j=0; j<10; j++) a[j] = j;
      free(a);
      Tcl_SetObjResult(interp, Tcl_NewIntObj(a[i]));
      break;
    }
    case 4: {
      Tcl_Panic("Deliberate panic");
      break;
    }
  }
  return TCL_OK;
}  
  

/*

  void *NotUsed,
  Tcl_Interp *interp,    /* The TCL interpreter that invoked this command */
  int argc,              /* Number of arguments */
  const char **argv      /* Text of each argument */
){
  Pager *pPager;
  char zBuf[100];
  DbPage *pPage = 0;
  int pgno;
  int rc;
  if( argc!=3 ){
    Tcl_AppendResult(interp, "wrong # args: should be \"", argv[0],
       " ID PGNO\"", 0);
    return TCL_ERROR;
  }

  char *zNew;
  int nArg = 0;
  const char *zSep = "WHERE";
  echo_vtab *pVtab = (echo_vtab *)tab;
  sqlite3_stmt *pStmt = 0;
  Tcl_Interp *interp = pVtab->interp;

  int nRow = 0;
  int useIdx = 0;
  int rc = SQLITE_OK;
  int useCost = 0;
  double cost = 0;
  int isIgnoreUsable = 0;
  if( Tcl_GetVar(interp, "echo_module_ignore_usable", TCL_GLOBAL_ONLY) ){
    isIgnoreUsable = 1;
  }

  if( simulateVtabError(pVtab, "xBestIndex") ){
    return SQLITE_ERROR;

  sqlite3_value **apData, 
  sqlite_int64 *pRowid
){
  echo_vtab *pVtab = (echo_vtab *)tab;
  sqlite3 *db = pVtab->db;
  int rc = SQLITE_OK;

  sqlite3_stmt *pStmt = 0;
  char *z = 0;               /* SQL statement to execute */
  int bindArgZero = 0;       /* True to bind apData[0] to sql var no. nData */
  int bindArgOne = 0;        /* True to bind apData[1] to sql var no. 1 */
  int i;                     /* Counter variable used by for loops */

  assert( nData==pVtab->nCol+2 || nData==1 );

/*
** This routine sets entries in the global ::sqlite_options() array variable
** according to the compile-time configuration of the database.  Test
** procedures use this to determine when tests should be omitted.
*/
static void set_options(Tcl_Interp *interp){
#if HAVE_MALLOC_USABLE_SIZE
  Tcl_SetVar2(interp, "sqlite_options", "malloc_usable_size", "1",
              TCL_GLOBAL_ONLY);
#else
  Tcl_SetVar2(interp, "sqlite_options", "malloc_usable_size", "0",
              TCL_GLOBAL_ONLY);
#endif

    if( rc==SQLITE_OK ){
      int ii;
      for(ii=0; rc==SQLITE_OK && ii<(int)pMain->nPage; ii++){
        i64 iOff = (i64)(pMain->nPagesize) * (i64)ii;
        if( iOff==PENDING_BYTE ) continue;
        rc = sqlite3OsRead(pMain->pReal, aData, pMain->nPagesize, iOff);
        pMain->aCksum[ii] = genCksum(aData, pMain->nPagesize);
        if( ii+1==(int)pMain->nPage && rc==SQLITE_IOERR_SHORT_READ ){
          rc = SQLITE_OK;
        }
      }
    }

    start_ioerr_simulation(iSave, iSave2);
  }

  sqlite3_free(aData);

      /* No-op. This special case is hit when the backup code is copying a
      ** to a database with a larger page-size than the source database and
      ** it needs to fill in the non-locking-region part of the original
      ** pending-byte page.
      */
    }else{
      u32 pgno = (u32)(iOfst/p->nPagesize + 1);
      assert( (iAmt==1||iAmt==(int)p->nPagesize) &&
              ((iOfst+iAmt)%p->nPagesize)==0 );
      assert( pgno<=p->nPage || p->nSync>0 );
      assert( pgno>p->nPage || sqlite3BitvecTest(p->pWritable, pgno) );
    }
  }

  rc = sqlite3OsWrite(p->pReal, zBuf, iAmt, iOfst);
  if( (p->flags&SQLITE_OPEN_MAIN_JOURNAL) && iAmt==12 ){

static int test_status(
  void * clientData,
  Tcl_Interp *interp,
  int objc,
  Tcl_Obj *CONST objv[]
){
  int rc, iValue, mxValue;
  int i, op = 0, resetFlag;
  const char *zOpName;
  static const struct {
    const char *zName;
    int op;
  } aOp[] = {
    { "SQLITE_STATUS_MEMORY_USED",         SQLITE_STATUS_MEMORY_USED         },
    { "SQLITE_STATUS_MALLOC_SIZE",         SQLITE_STATUS_MALLOC_SIZE         },

static int test_db_status(
  void * clientData,
  Tcl_Interp *interp,
  int objc,
  Tcl_Obj *CONST objv[]
){
  int rc, iValue, mxValue;
  int i, op = 0, resetFlag;
  const char *zOpName;
  sqlite3 *db;
  extern int getDbPointer(Tcl_Interp*, const char*, sqlite3**);
  static const struct {
    const char *zName;
    int op;
  } aOp[] = {

static void multiplexControlFunc(
  sqlite3_context *context,
  int argc,
  sqlite3_value **argv
){
  int rc = SQLITE_OK;
  sqlite3 *db = sqlite3_context_db_handle(context);
  int op = 0;
  int iVal;

  if( !db || argc!=2 ){ 
    rc = SQLITE_ERROR; 
  }else{
    /* extract params */
    op = sqlite3_value_int(argv[0]);

  }

  if( rc==SQLITE_OK ){
    const char *zUri = (flags & SQLITE_OPEN_URI) ? zName : 0;
    /* assign pointers to extra space allocated */
    memset(pGroup, 0, sz);
    pMultiplexOpen->pGroup = pGroup;
    pGroup->bEnabled = (unsigned char)-1;
    pGroup->bTruncate = sqlite3_uri_boolean(zUri, "truncate", 
                                   (flags & SQLITE_OPEN_MAIN_DB)==0);
    pGroup->szChunk = (int)sqlite3_uri_int64(zUri, "chunksize",
                                        SQLITE_MULTIPLEX_CHUNK_SIZE);
    pGroup->szChunk = (pGroup->szChunk+0xffff)&~0xffff;
    if( zName ){
      char *p = (char *)&pGroup[1];

}

/*
** Bring the named file under quota management.  Or if it is already under
** management, update its size.
*/
int sqlite3_quota_file(const char *zFilename){
  char *zFull = 0;
  sqlite3_file *fd;
  int rc;
  int outFlags = 0;
  sqlite3_int64 iSize;
  int nAlloc = gQuota.sThisVfs.szOsFile + gQuota.sThisVfs.mxPathname+2;

  /* Allocate space for a file-handle and the full path for file zFilename */

*/
static int tvfsSync(sqlite3_file *pFile, int flags){
  int rc = SQLITE_OK;
  TestvfsFd *pFd = tvfsGetFd(pFile);
  Testvfs *p = (Testvfs *)pFd->pVfs->pAppData;

  if( p->pScript && p->mask&TESTVFS_SYNC_MASK ){
    char *zFlags = 0;

    switch( flags ){
      case SQLITE_SYNC_NORMAL:
        zFlags = "normal";
        break;
      case SQLITE_SYNC_FULL:
        zFlags = "full";

    ** TESTVFS ioerr ?IFAIL PERSIST?
    **
    **   Where IFAIL is an integer and PERSIST is boolean.
    */
    case CMD_CANTOPENERR:
    case CMD_IOERR:
    case CMD_FULLERR: {
      TestFaultInject *pTest = 0;
      int iRet;

      switch( aSubcmd[i].eCmd ){
        case CMD_IOERR: pTest = &p->ioerr_err; break;
        case CMD_FULLERR: pTest = &p->full_err; break;
        case CMD_CANTOPENERR: pTest = &p->cantopen_err; break;
        default: assert(0);

**
** This file contains functions for allocating memory, comparing
** strings, and stuff like that.
**
*/
#include "sqliteInt.h"
#include <stdarg.h>
#if HAVE_ISNAN || SQLITE_HAVE_ISNAN
# include <math.h>
#endif

/*
** Routine needed to support the testcase() macro.
*/
#ifdef SQLITE_COVERAGE_TEST

** Return true if the floating point value is Not a Number (NaN).
**
** Use the math library isnan() function if compiled with SQLITE_HAVE_ISNAN.
** Otherwise, we have our own implementation that works on most systems.
*/
int sqlite3IsNaN(double x){
  int rc;   /* The value return */
#if !SQLITE_HAVE_ISNAN && !HAVE_ISNAN
  /*
  ** Systems that support the isnan() library function should probably
  ** make use of it by compiling with -DSQLITE_HAVE_ISNAN.  But we have
  ** found that many systems do not have a working isnan() function so
  ** this implementation is provided as an alternative.
  **
  ** This NaN test sometimes fails if compiled on GCC with -ffast-math.

  */
#ifdef __FAST_MATH__
# error SQLite will not work correctly with the -ffast-math option of GCC.
#endif
  volatile double y = x;
  volatile double z = y;
  rc = (y!=z);
#else  /* if HAVE_ISNAN */
  rc = isnan(x);
#endif /* HAVE_ISNAN */
  testcase( rc );
  return rc;
}
#endif /* SQLITE_OMIT_FLOATING_POINT */

/*
** Compute a string length that is limited to what can be stored in

    sqlite3VdbeRecordUnpack(pC->pKeyInfo, pIn3->n, pIn3->z, pIdxKey);
  }
  pIdxKey->default_rc = 0;
  if( pOp->opcode==OP_NoConflict ){
    /* For the OP_NoConflict opcode, take the jump if any of the
    ** input fields are NULL, since any key with a NULL will not
    ** conflict */
    for(ii=0; ii<pIdxKey->nField; ii++){
      if( pIdxKey->aMem[ii].flags & MEM_Null ){
        pc = pOp->p2 - 1; VdbeBranchTaken(1,2);
        break;
      }
    }
  }
  rc = sqlite3BtreeMovetoUnpacked(pC->pCursor, pIdxKey, 0, 0, &res);
  if( pOp->p4.i==0 ){

#if SQLITE_MAX_WORKER_THREADS>0
    if( pSorter->bUseThreads ){
      rc = vdbePmaReaderNext(pSorter->pReader);
      *pbEof = (pSorter->pReader->pFd==0);
    }else
#endif
    /*if( !pSorter->bUseThreads )*/ {
      assert( pSorter->pMerger!=0 );
      assert( pSorter->pMerger->pTask==(&pSorter->aTask[0]) );
      rc = vdbeMergeEngineStep(pSorter->pMerger, pbEof);
    }
  }else{
    SorterRecord *pFree = pSorter->list.pList;
    pSorter->list.pList = pFree->u.pNext;
    pFree->u.pNext = 0;

source $testdir/tester.tcl
source $testdir/wal_common.tcl
set testprefix e_walauto


proc read_nbackfill {} {
  seek $::shmfd 96
  binary scan [read $::shmfd 4] n nBackfill
  set nBackfill
}
proc read_mxframe {} {
  seek $::shmfd 16
  binary scan [read $::shmfd 4] n mxFrame
  set mxFrame
}

# Assuming that the main db for database handle
#
proc do_autocommit_threshold_test {tn value} {

#    May you share freely, never taking more than you give.
#
#***********************************************************************
# This file implements regression tests for SQLite library. 
#
# This file checks error recovery from malformed SQL strings.
#


set testdir [file dirname $argv0]
source $testdir/tester.tcl


proc fuzzcatch {sql} {
  return [lindex [catchsql $sql] 0]

} {1}
do_test fuzz2-5.4 {
  fuzzcatch {REPLACE INTO AAAAAA SELECT DISTINCT "AAAAAA" . * WHERE AAAAAA ( AAAAAA ( ) ) GROUP BY AAAAAA . AAAAAA . "AAAAAA" IN "AAAAAA" | AAAAAA ( ALL , ) ORDER BY #238, #92 DESC LIMIT 0 OFFSET - RAISE ( IGNORE ) NOT NULL > RAISE ( IGNORE ) IS NULL}
} {1}
do_test fuzz2-5.5 {
  fuzzcatch {SELECT ALL * GROUP BY EXISTS ( SELECT "AAAAAA" . * , AAAAAA ( * ) AS AAAAAA FROM "AAAAAA" . "AAAAAA" AS "AAAAAA" USING ( AAAAAA , "AAAAAA" , "AAAAAA" ) WHERE AAAAAA ( DISTINCT ) - RAISE ( FAIL , "AAAAAA" ) HAVING "AAAAAA" . "AAAAAA" . AAAAAA ORDER BY #182 , #55 ) BETWEEN EXISTS ( SELECT ALL * FROM ( ( }
} {1}

# Test cases discovered by Michal Zalewski on 2015-01-03 and reported on the
# sqlite-users mailing list.  All of these cases cause segfaults in 
# SQLite 3.8.7.4 and earlier.
#
do_test fuzz2-6.1 {
  catchsql {SELECT n()AND+#0;}
} {1 {near "#0": syntax error}}
do_test fuzz2-6.2 {
  catchsql {SELECT strftime()}
} {0 {{}}}
do_test fuzz2-6.3 {
  catchsql {DETACH(SELECT group_concat(q));}
} {1 {no such column: q}}
do_test fuzz2-6.4a {
  db eval {DROP TABLE IF EXISTS t0; CREATE TABLE t0(t);}
  catchsql {INSERT INTO t0 SELECT strftime();}
} {0 {}}
do_test fuzz2-6.4b {
  db eval {SELECT quote(t) FROM t0} 
} {NULL}


finish_test

  test_set $allquicktests -exclude *malloc* *ioerr* *fault* -include malloc.test
]

test_suite "valgrind" -prefix "" -description {
  Run the "veryquick" test suite with a couple of multi-process tests (that
  fail under valgrind) omitted.
} -files [
  test_set $allquicktests -exclude *malloc* *ioerr* *fault* wal.test \
              shell*.test crash8.test atof1.test selectG.test \
              tkt-fc62af4523.test
] -initialize {
  set ::G(valgrind) 1
} -shutdown {
  unset -nocomplain ::G(valgrind)
}

test_suite "valgrind-nolookaside" -prefix "" -description {

$tcl_platform(os) and $tcl_platform(machine) variables. Supported
platforms are "Linux-x86", "Linux-x86_64" and "Darwin-i386".

Every test begins with a fresh run of the configure script at the top
of the SQLite source tree.
}

# Omit comments (text between # and \n) in a long multi-line string.
#
proc strip_comments {in} {
  regsub -all {#[^\n]*\n} $in {} out
  return $out
}

array set ::Configs [strip_comments {
  "Default" {
    -O2
    --disable-amalgamation --disable-shared
  }
  "Sanitize" {
    CC=clang -fsanitize=undefined
    -DSQLITE_ENABLE_STAT4
  }
  "Have-Not" {
    # The "Have-Not" configuration sets all possible -UHAVE_feature options
    # in order to verify that the code works even on platforms that lack
    # these support services.
    -DHAVE_FDATASYNC=0
    -DHAVE_GMTIME_R=0
    -DHAVE_ISNAN=0
    -DHAVE_LOCALTIME_R=0
    -DHAVE_LOCALTIME_S=0
    -DHAVE_MALLOC_USABLE_SIZE=0
    -DHAVE_STRCHRNUL=0
    -DHAVE_USLEEP=0
    -DHAVE_UTIME=0
  }
  "Unlock-Notify" {
    -O2
    -DSQLITE_ENABLE_UNLOCK_NOTIFY
    -DSQLITE_THREADSAFE
    -DSQLITE_TCL_DEFAULT_FULLMUTEX=1
  }
  "Secure-Delete" {
    -O2
    -DSQLITE_SECURE_DELETE=1
    -DSQLITE_SOUNDEX=1
  }
  "Update-Delete-Limit" {
    -O2
    -DSQLITE_DEFAULT_FILE_FORMAT=4
    -DSQLITE_ENABLE_UPDATE_DELETE_LIMIT=1
    -DSQLITE_ENABLE_STMT_SCANSTATUS
  }
  "Check-Symbols" {
    -DSQLITE_MEMDEBUG=1
    -DSQLITE_ENABLE_FTS3_PARENTHESIS=1
    -DSQLITE_ENABLE_FTS3=1
    -DSQLITE_ENABLE_RTREE=1
    -DSQLITE_ENABLE_MEMSYS5=1
    -DSQLITE_ENABLE_MEMSYS3=1
    -DSQLITE_ENABLE_COLUMN_METADATA=1
    -DSQLITE_ENABLE_UPDATE_DELETE_LIMIT=1
    -DSQLITE_SECURE_DELETE=1
    -DSQLITE_SOUNDEX=1
    -DSQLITE_ENABLE_ATOMIC_WRITE=1
    -DSQLITE_ENABLE_MEMORY_MANAGEMENT=1
    -DSQLITE_ENABLE_OVERSIZE_CELL_CHECK=1
    -DSQLITE_ENABLE_STAT4
    -DSQLITE_ENABLE_STMT_SCANSTATUS
  }
  "Debug-One" {
    --disable-shared
    -O2
    -DSQLITE_DEBUG=1
    -DSQLITE_MEMDEBUG=1
    -DSQLITE_MUTEX_NOOP=1

    -DHAVE_USLEEP=1
  }
  "Valgrind" {
    -DSQLITE_ENABLE_STAT4
    -DSQLITE_ENABLE_FTS4
    -DSQLITE_ENABLE_RTREE
  }

  # The next group of configurations are used only by the
  # Failure-Detection platform.  They are all the same, but we need
  # different names for them all so that they results appear in separate
  # subdirectories.
  #
  Fail0 {-O0}
  Fail2 {-O0}
  Fail3 {-O0}
  Fail4 {-O0}
}]

array set ::Platforms [strip_comments {
  Linux-x86_64 {
    "Check-Symbols"           checksymbols
    "Debug-One"               "mptest test"
    "Have-Not"                test
    "Secure-Delete"           test
    "Unlock-Notify"           "QUICKTEST_INCLUDE=notify2.test test"
    "Update-Delete-Limit"     test
    "Extra-Robustness"        test
    "Device-Two"              test
    "No-lookaside"            test
    "Devkit"                  test
    "Sanitize"                {QUICKTEST_OMIT=func4.test,nan.test test}
    "Valgrind"                valgrindtest
    "Default"                 "threadtest fulltest"
    "Device-One"              fulltest
  }
  Linux-i686 {
    "Devkit"                  test
    "Have-Not"                test
    "Unlock-Notify"           "QUICKTEST_INCLUDE=notify2.test test"
    "Device-One"              test
    "Device-Two"              test
    "Default"                 "threadtest fulltest"
  }
  Darwin-i386 {
    "Locking-Style"           "mptest test"
    "Have-Not"                test
    "OS-X"                    "threadtest fulltest"
  }
  Darwin-x86_64 {
    "Locking-Style"           "mptest test"
    "Have-Not"                test
    "OS-X"                    "threadtest fulltest"
  }
  "Windows NT-intel" {
    "Default"                 "mptest fulltestonly"
    "Have-Not"                test
  }

  # The Failure-Detection platform runs various tests that deliberately
  # fail.  This is used as a test of this script to verify that this script
  # correctly identifies failures.
  #
  Failure-Detection {
    Fail0     "TEST_FAILURE=0 test"
    Sanitize  "TEST_FAILURE=1 test"
    Fail2     "TEST_FAILURE=2 valgrindtest"
    Fail3     "TEST_FAILURE=3 valgrindtest"
    Fail4     "TEST_FAILURE=4 test"
  }
}]


# End of configuration section.
#########################################################################
#########################################################################

foreach {key value} [array get ::Platforms] {

      }
    }
  }
  close $fd
  if {!$seen} {
    set rc 1
    set errmsg "Test did not complete"
    if {[file readable core]} {
      append errmsg " - core file exists"
    }
  }
}

proc run_test_suite {name testtarget config} {
  # Tcl variable $opts is used to build up the value used to set the
  # OPTS Makefile variable. Variable $cflags holds the value for
  # CFLAGS. The makefile will pass OPTS to both gcc and lemon, but
  # CFLAGS is only passed to gcc.
  #
  set cflags "-g"
  set opts ""
  set title ${name}($testtarget)
  set configOpts ""

  regsub -all {#[^\n]*\n} $config \n config
  foreach arg $config {
    if {[regexp {^-[UD]} $arg]} {
      lappend opts $arg
    } elseif {[regexp {^[A-Z]+=} $arg]} {
      lappend testtarget $arg
    } elseif {[regexp {^--(enable|disable)-} $arg]} {
      lappend configOpts $arg
    } else {
      lappend cflags $arg
    }
  }

  set rc 0
  set tm1 [clock seconds]
  set origdir [pwd]
  trace_cmd file mkdir $dir
  trace_cmd cd $dir
  set errmsg {}
  catch {file delete core}
  set rc [catch [configureCommand $configOpts]]
  if {!$rc} {
    set rc [catch [makeCommand $testtarget $cflags $opts]]
    count_tests_and_errors test.log rc errmsg
  }
  trace_cmd cd $origdir
  set tm2 [clock seconds]

  catchcmd "test.db" ".explain \"OFF"
} {0 {}}
do_test shell1-2.2.4 {
  catchcmd "test.db" ".explain \'OFF"
} {0 {}}
do_test shell1-2.2.5 {
  catchcmd "test.db" ".mode \"insert FOO"
} {1 {Error: mode should be one of: ascii column csv html insert line list tabs tcl}}
do_test shell1-2.2.6 {
  catchcmd "test.db" ".mode \'insert FOO"
} {1 {Error: mode should be one of: ascii column csv html insert line list tabs tcl}}

# check multiple tokens, and quoted tokens
do_test shell1-2.3.1 {
  catchcmd "test.db" ".explain 1"
} {0 {}}
do_test shell1-2.3.2 {
  catchcmd "test.db" ".explain on"

do_test shell1-2.3.7 {
  catchcmd "test.db" ".\'explain\' \'OFF\'"
} {0 {}}

# check quoted args are unquoted
do_test shell1-2.4.1 {
  catchcmd "test.db" ".mode FOO"
} {1 {Error: mode should be one of: ascii column csv html insert line list tabs tcl}}
do_test shell1-2.4.2 {
  catchcmd "test.db" ".mode csv"
} {0 {}}
do_test shell1-2.4.2 {
  catchcmd "test.db" ".mode \"csv\""
} {0 {}}

} {0 {}}
do_test shell1-3.12.3 {
  # too many arguments
  catchcmd "test.db" ".indices FOO BAD"
} {1 {Usage: .indices ?LIKE-PATTERN?}}

# .mode MODE ?TABLE?     Set output mode where MODE is one of:
#                          ascii    Columns/rows delimited by 0x1F and 0x1E
#                          csv      Comma-separated values
#                          column   Left-aligned columns.  (See .width)
#                          html     HTML <table> code
#                          insert   SQL insert statements for TABLE
#                          line     One value per line
#                          list     Values delimited by .separator strings
#                          tabs     Tab-separated values
#                          tcl      TCL list elements
do_test shell1-3.13.1 {
  catchcmd "test.db" ".mode"
} {1 {Error: mode should be one of: ascii column csv html insert line list tabs tcl}}
do_test shell1-3.13.2 {
  catchcmd "test.db" ".mode FOO"
} {1 {Error: mode should be one of: ascii column csv html insert line list tabs tcl}}
do_test shell1-3.13.3 {
  catchcmd "test.db" ".mode csv"
} {0 {}}
do_test shell1-3.13.4 {
  catchcmd "test.db" ".mode column"
} {0 {}}
do_test shell1-3.13.5 {

  # extra arguments ignored
  catchcmd "test.db" ".mode tcl BAD"
} {0 {}}

# don't allow partial mode type matches
do_test shell1-3.13.12 {
  catchcmd "test.db" ".mode l"
} {1 {Error: mode should be one of: ascii column csv html insert line list tabs tcl}}
do_test shell1-3.13.13 {
  catchcmd "test.db" ".mode li"
} {1 {Error: mode should be one of: ascii column csv html insert line list tabs tcl}}
do_test shell1-3.13.14 {
  catchcmd "test.db" ".mode lin"
} {0 {}}

# .nullvalue STRING      Print STRING in place of NULL values
do_test shell1-3.14.1 {
  catchcmd "test.db" ".nullvalue"

  }
  catchcmd "test.db" ".schema"
} {0 {CREATE TABLE t1(x);
CREATE VIEW v2 AS SELECT x+1 AS y FROM t1;
CREATE VIEW v1 AS SELECT y+1 FROM v2;}}
db eval {DROP VIEW v1; DROP VIEW v2; DROP TABLE t1;}

# .separator STRING  Change column separator used by output and .import
do_test shell1-3.22.1 {
  catchcmd "test.db" ".separator"
} {1 {Usage: .separator COL ?ROW?}}
do_test shell1-3.22.2 {
  catchcmd "test.db" ".separator FOO"
} {0 {}}
do_test shell1-3.22.3 {
  catchcmd "test.db" ".separator ABC XYZ"
} {0 {}}
do_test shell1-3.22.4 {
  # too many arguments
  catchcmd "test.db" ".separator FOO BAD BAD2"
} {1 {Usage: .separator COL ?ROW?}}

# .show                  Show the current values for various settings
do_test shell1-3.23.1 {
  set res [catchcmd "test.db" ".show"]
  list [regexp {echo:} $res] \
       [regexp {explain:} $res] \
       [regexp {headers:} $res] \
       [regexp {mode:} $res] \
       [regexp {nullvalue:} $res] \
       [regexp {output:} $res] \
       [regexp {colseparator:} $res] \
       [regexp {rowseparator:} $res] \
       [regexp {stats:} $res] \
       [regexp {width:} $res]
} {1 1 1 1 1 1 1 1 1 1}
do_test shell1-3.23.2 {
  # too many arguments
  catchcmd "test.db" ".show BAD"
} {1 {Usage: .show}}

# .stats ON|OFF          Turn stats on or off
do_test shell1-3.23b.1 {

  # too many arguments
  catchcmd "test.db" ".import FOO BAR BAD"
} {1 {Usage: .import FILE TABLE}}

# .separator STRING      Change separator used by output mode and .import
do_test shell5-1.2.1 {
  catchcmd "test.db" ".separator"
} {1 {Usage: .separator COL ?ROW?}}
do_test shell5-1.2.2 {
  catchcmd "test.db" ".separator ONE"
} {0 {}}
do_test shell5-1.2.3 {
  catchcmd "test.db" ".separator ONE TWO"
} {0 {}}
do_test shell5-1.2.4 {
  # too many arguments
  catchcmd "test.db" ".separator ONE TWO THREE"
} {1 {Usage: .separator COL ?ROW?}}

# column separator should default to "|"
do_test shell5-1.3.1.1 {
  set res [catchcmd "test.db" ".show"]
  list [regexp {colseparator: \"\|\"} $res]
} {1}

# row separator should default to "\n"
do_test shell5-1.3.1.2 {
  set res [catchcmd "test.db" ".show"]
  list [regexp {rowseparator: \"\\n\"} $res]
} {1}

# set separator to different value.
# check that .show reports new value
do_test shell5-1.3.2 {
  set res [catchcmd "test.db" {.separator ,
.show}]

.mode csv
CREATE TABLE t4(a, b);
.import shell5.csv t4
  }]
  db eval { SELECT * FROM t4 }
} {xy\" hello one 2 {} {}}

#----------------------------------------------------------------------------
# Tests for the shell "ascii" import/export mode.
#
do_test shell5-3.1 {
  set fd [open shell5.csv w]
  fconfigure $fd -encoding binary -translation binary
  puts -nonewline $fd "\"test 1\"\x1F,test 2\r\n\x1E"
  puts -nonewline $fd "test 3\x1Ftest 4\n"
  close $fd
  catchcmd test.db {
.mode ascii
CREATE TABLE t5(a, b);
.import shell5.csv t5
  }
  db eval { SELECT * FROM t5 }
} "\{\"test 1\"} \{,test 2\r\n\} \{test 3\} \{test 4\n\}"

do_test shell5-3.2 {
  set x [catchcmd test.db {
.mode ascii
SELECT * FROM t5;
  }]
  # Handle platform end-of-line differences
  regsub -all {[\n\r]?\n} $x <EOL> x
  set x
} "0 \{\"test 1\"\x1F,test 2<EOL>\x1Etest 3\x1Ftest 4<EOL>\x1E\}"

finish_test

        psp->errorcnt++;
      }
      break;
    case WAITING_FOR_DECL_ARG:
      if( x[0]=='{' || x[0]=='\"' || isalnum(x[0]) ){
        const char *zOld, *zNew;
        char *zBuf, *z;
        int nOld, n, nLine = 0, nNew, nBack;
        int addLineMacro;
        char zLine[50];
        zNew = x;
        if( zNew[0]=='"' || zNew[0]=='{' ) zNew++;
        nNew = lemonStrlen(zNew);
        if( *psp->declargslot ){
          zOld = *psp->declargslot;

** the appropriate data structures in the global state vector "gp".
*/
void Parse(struct lemon *gp)
{
  struct pstate ps;
  FILE *fp;
  char *filebuf;
  unsigned int filesize;
  int lineno;
  int c;
  char *cp, *nextcp;
  int startline = 0;

  memset(&ps, '\0', sizeof(ps));
  ps.gp = gp;

    }else{                          /* All other (one character) operators */
      cp++;
      nextcp = cp;
    }
    c = *cp;
    *cp = 0;                        /* Null terminate the token */
    parseonetoken(&ps);             /* Parse the token */
    *cp = (char)c;                  /* Restore the buffer */
    cp = nextcp;
  }
  free(filebuf);                    /* Release the buffer after parsing */
  gp->rule = ps.firstrule;
  gp->errorcnt = ps.errorcnt;
}
/*************************** From the file "plink.c" *********************/

      lemon_sprintf(zInt, "%d", p1);
      p1 = p2;
      lemon_strcpy(&z[used], zInt);
      used += lemonStrlen(&z[used]);
      zText++;
      n--;
    }else{
      z[used++] = (char)c;
    }
  }
  z[used] = 0;
  return z;
}

/*

#
foreach hdr {
   btree.h
   btreeInt.h
   hash.h
   hwtime.h
   keywordhash.h
   msvc.h
   mutex.h
   opcodes.h
   os_common.h
   os_setup.h
   os_win.h
   os.h
   pager.h

   fts3.h
   fts3Int.h
   fts3_hash.h
   fts3_tokenizer.h
   hash.h
   hwtime.h
   keywordhash.h
   msvc.h
   mutex.h
   opcodes.h
   os_common.h
   os_setup.h
   os_win.h
   os.h
   pager.h

#
foreach hdr {
   btree.h
   btreeInt.h
   hash.h
   hwtime.h
   keywordhash.h
   msvc.h
   opcodes.h
   os_common.h
   os_setup.h
   os_win.h
   os.h
   pager.h
   parse.h