Documentation Source Text

Artifact Content
Login

Artifact 53cf9d802402c54cdccab77a342f3a0da6527eda:


<title>SQLite TH3</title>
<tcl>hd_keywords {TH3}</tcl>

<h1 align="center">TH3: SQLite Test Harness #3</h1>

<h2>1.0 Overview</h2>

<p>SQLite Test Harness #3 (hereafter "TH3") is one of
[three test harnesses] used for testing SQLite.
TH3 is designed to meet the following objectives:</p>

<ul>
<li><p> TH3 is able to run on embedded platforms that lack the support
     infrastructure of workstations.</p></li>

<li><p> TH3 tests SQLite in an as-deployed configuration using only
     published and documented interfaces.
     In other words, TH3 tests the compiled object code, not
     the source code, thus verifying that no problems were introduced
     by compiler bugs.  "Fly what you test and test what you fly."</p></li>

<li><p> TH3 checks SQLite's response to out-of-memory errors, disk I/O
     errors, and power loss during transaction commit. </p></li>

<li><p> TH3 exercises SQLite in a variety of run-time configurations
     (UTF8 vs UTF16, different pages sizes, varying journal modes, etc.)
     </p></li>

<li><p> TH3 achieves 100% branch test coverage (and 100% MC/DC)
    over the SQLite core.
    (Test coverage of the operating-system specific [VFSes] and extensions
    such as FTS and RTREE is less than 100%). </p></li>
</ul>

<p>TH3 was originally written for validation testing only, but has
subsequently been used for development testing and debugging
as well, and has proven very helpful in those roles.  A full-coverage
test takes less than five minutes on a workstation and hence
serves as a fast regression test during day-to-day maintenance
of the SQLite code base.</p>

<h2>2.0 Operation</h2>

<p>TH3 is a test program generator.  The output of TH3 is a program
implemented in C-code and intended to be
linked against the SQLite library under test.  The generated test
program is compiled and run on the target platform in order to verify
correct operation of SQLite on that platform.</p>

<p>The inputs to TH3 are test modules written in C or SQL and
small configuration
files that determine how to initialize SQLite.  The
TH3 package includes over eleven hundred test
modules and more than three dozen configuration files.
New modules and configurations
can be added to customize TH3 for specialized applications.
Each time TH3 is run, it reads
a subset of the available test modules and configuration files to generate
a custom C program that performs all of the specified tests under all
specified configurations.  A complete test of SQLite normally involves running
TH3 multiple times to generate multiple test programs covering different
aspects of SQLite's operation, then linking all test programs against
a common SQLite library and running them separately on the target platform.
SQLite will be found to work if all test programs pass.</p>

<p>There are no arbitrary limits in TH3.  One could generate a
single test program that contained all test modules and all configuration files.
However, such a test program might be too large to deploy on embedded
platforms.  Hence, TH3 provides the ability to break the library of test
modules up into smaller, more easily digested pieces.</p>

<p>Each individual test module might contain dozens, hundreds, or thousands
of separate tests.  The test modules can be written in C or as scripts of
SQL or a mixture of the two.  About two-thirds of the existing test modules are
written SQL with the remainder either in pure C or a combination of C and SQL.
</p>

<p>Each test module file contains a header which describes the circumstances
under which the test is valid.  For a particular configuration, only those
modules that are compatible with the configuration are run.  </p>

<h2>3.0 Generating A Test Program</h2>

<p>The TH3 program generator is a TCL script named "<tt>mkth3.tcl</tt>".
To generate a test program, one has merely to run this script and supply
the names of files containing test modules and configurations on the
command line.  Test modules are files that use the "<tt>.test</tt>" suffix
and configurations are files that use the "<tt>.cfg</tt>" suffix.  A
typical invocation of mkth3.tcl might look something like the following:</p>

<blockquote><pre>
tclsh mkth3.tcl *.test *.cfg &gt;testprog1.c
</pre></blockquote>

<p>The output from the mkth3.tcl script is a C program that contains
everything needed to run the tests - everything that is except for
the SQLite library itself.  The generated test program contains 
implementations for all of the support interfaces used by the test
modules and it contains the <tt>main()</tt> routine that drives the
tests.  To convert the test program into a working executable, simply
compile it against SQLite:</p>

<blockquote><pre>
cc -o testprog1 testprog1.c sqlite3.c
</pre></blockquote>

<p>The compilation step shown immediately above is merely representative.
In a working installation, one would normally want
to specify optimization parameters and compile-time switches on the
compiler command line.</p>

<p>For testing on embedded systems, the mkth3.tcl script and the compiler
steps shown above are performed on an ordinary workstation using
a cross-compiler, then the resulting test program is
transfer onto the device to be run.</p>

<p>Once the test program is generated, it is run with no arguments to
perform the tests.  Progress information as well as error diagnostics
appear on standard output.  (Alternative output arrangements can be made
using a compile-time option for embedded devices that lack a standard
output channel.) The program returns zero if there are no
errors and non-zero if any problems were detected.</p>

<p>Typical output from a single TH3 test program run looks like this:

<blockquote><pre>
With SQLite 3.8.11 2015-05-15 04:13:15 56ef98a04765c34c1c2f3ed7a6f03a732f3b886e
-DSQLITE_COVERAGE_TEST
-DSQLITE_NO_SYNC
-DSQLITE_SYSTEM_MALLOC
-DSQLITE_THREADSAFE=1
Config-begin c1.
Begin c1.pager08
End c1.pager08
Begin c1.build33
End c1.build33
Begin c1.orderby01
End c1.orderby01
<i>... 15014 lines of output omitted ....</i>
Begin 64k.syscall01
End 64k.syscall01
Begin 64k.build01
End 64k.build01
Begin 64k.auth01
End 64k.auth01
Config-end 64k. TH3 memory used: 6373738
Config-begin wal1.
Begin wal1.wal37
End wal1.wal37
Config-end wal1. TH3 memory used: 100961
All 226 VDBE coverage points reached
th3: 0 errors out of 1442264 tests in 213.741 seconds. 64-bit little-endian
th3: SQLite 3.8.11 2015-05-15 04:13:15 56ef98a04765c34c1c2f3ed7a6f03a732f3b886e
</pre></blockquote>

<p>The output begins with a report of the [SQLITE_SOURCE_ID]
(cross-checked again [sqlite3_sourceid()]) for the
SQLite under test and the compile-time options used as reported
by [sqlite3_compileoption_get()].  The output concludes with a summary
of the test results and a repeat of the [SQLITE_SOURCE_ID].  If any
errors are detected, additional lines detail the problem.  The error
reporting lines always begin with a single space character so that they
can be quickly extracted from large output files using:

<blockquote><pre>
grep "&#94; "
</pre></blockquote>

<p>The default output shows the beginning and end of each configuration
and test module combination.  In the example above "c1" and "64k" are
configurations and "pager08", "build33", "orderby01", etc. are test modules.
Compile-time and run-time options are available to increase or decrease
the amount of output.
The output can be increased by showing each test case within each
test module.  The output can be decreased
by degrees: omitting test modules starts and stops,
omitting configuration starts and stops, and finally by omitting all output.
<h3>3.1 Test Automation Scripts</h3>

<p>TH3 comes with additional TCL scripts that help automate the testing
process on workstations.  The "th3make" script automatically runs "mkth3.tcl"
and "gcc" and then runs the resulting test program and checks the results.
Arguments to th3make include all of the "*.test" test modules and 
"*.cfg" configurations that are to be included in the test.  Additional
options to th3make can cause the test program to be compiled using different
compilers (GCC, Clang, MSVC), to use different output verbosity levels, to
run the test program under valgrind, to check the output for coverage using
gcov, and so forth.  The th3make script also accepts "*.rc" filenames as
arguments.  These *.rc files are just collections of other arguments that
are commonly used together for a single purpose.  For example, the "quick.rc"
file contains a set of eight arguments to th3make that run a fast (3-minute)
full-coverage test.  This allows the operator to type "./th3make quick.rc" as
a short-cut to typing out all of the required command-line options.  The
following are a few of the more than 40 available *.rc files:

<ul>
<li><b>alignment</b><i>N</i><b>.rc</b> - 
    These files contain -D options to the compiler that are used by
    various notable downstreams.
<li><b>cov.rc</b> - Options for measuring test coverage
<li><b>extensions.rc</b> - Options to enable [FTS4], [R-Trees],
    and [SQLITE_STAT4|STAT4].
<li><b>fast.rc</b> - Run mosts tests, including those not needed for
    coverage, skipping only soak tests, using delivery compiler options
    (ex: -O3)
<li><b>memdebug.rc</b> - like test.rc but also enable
    [SQLITE_MEMDEBUG|-DSQLITE_MEMDEBUG].
<li><b>min.rc</b> - Run the minimum set of tests needed for 100% coverage.
<li><b>quick.rc</b> - Run all tests required for 100% coverage tests
    using -Os and [SQLITE_DEBUG|-DSQLITE_DEBUG].
<li><b>test.rc</b> - Run the same tests as in fast.rc but without
    compiler optimization and enabling options like
    [SQLITE_DEBUG|-DSQLITE_DEBUG] and
    -DSQLITE_ENABLE_EXPENSIVE_ASSERT.
<li><b>test-ex.rc</b> - long-running soak tests.
</ul>

<p>The TH3 repository also includes the "multitest.tcl" script, another
TCL script used to automate TH3 testing on workstations.  Multitest.tcl
automatically compiles SQLite, then
runs ./th3make repeatedly with a variety of alignments, and captures
the output in a succinct summary screen.  A typical multitest.tcl run
generates output that looks like this:

<blockquote><pre>
file mkdir sqlite3bld
cd sqlite3bld
exec sh /home/drh/sqlite/sqlite/configure
file copy -force config.h ../config.h
exec make clean sqlite3.c
file rename sqlite3.c ../sqlite3.c
aa4f0f90c9c77424943e026a2ecee4a6c7f9e0d3  ../sqlite3.c
file rename sqlite3.h ../sqlite3.h
exec make clean sqlite3.c OPTS=-DSQLITE_ENABLE_UPDATE_DELETE_LIMIT=1
file rename sqlite3.c ../sqlite3udl.c
0d3bbc92c433f940253bb2c7c19de7783133929d  ../sqlite3udl.c
exec make clean sqlite3.c OPTS=-DSQLITE_SMALL_STACK=1
file rename sqlite3.c ../sqlite3ss.c
fcf6963e94096324461076d3b9e9dc1888e066e1  ../sqlite3ss.c
cd ..
*******************************************************************************
t01: quick.rc.................................................. Ok   (00:04:00)
t02: cov.rc.................................................... Ok   (00:04:40)
t03: quick.rc extensions.rc -D_HAVE_SQLITE_CONFIG_H............ Ok   (00:05:22)
t04: cov.rc -DSQLITE_ENABLE_STAT4 -D_HAVE_SQLITE_CONFIG_H...... Ok   (00:05:20)
t05: test.rc ../th3private/*.test.............................. Ok   (00:00:17)
t06: test.rc ../th3private/*.test -DSQLITE_ENABLE_STAT4........ Ok   (00:00:43)
t07: quick.rc -DSQLITE_TEST_REALLOC_STRESS -funsigned-char..... Ok   (00:04:56)
t08: quick.rc -DSQLITE_THREADSAFE=0 -fsigned-char.............. Ok   (00:03:12)
t09: quick.rc sqlite3ss.c -DSQLITE_MAX_ATTACHED=125............ Ok   (00:04:04)
t10: quick.rc -DSQLITE_RUNTIME_BYTEORDER....................... Ok   (00:03:58)
t11: quick.rc -DSQLITE_DIRECT_OVERFLOW_READ.................... Ok   (00:04:01)
t12: fast.rc................................................... Ok   (00:14:19)
t13: fast.rc alignment1.rc -m32................................ Ok   (00:20:51)
t14: fast.rc alignment2.rc sqlite3udl.c........................ Ok   (00:16:06)
t15: fast.rc alignment4.rc..................................... Ok   (00:12:55)
t16: fast.rc alignment5.rc..................................... Ok   (00:14:58)
t17: fast.rc alignment6.rc..................................... Ok   (00:14:31)
t18: fast.rc alignment7.rc..................................... Ok   (00:16:06)
t19: fast.rc alignment8.rc sqlite3udl.c........................ Ok   (00:24:09)
t20: test.rc alignment1.rc..................................... Ok   (00:49:27)
t21: test.rc alignment2.rc sqlite3udl.c........................ Ok   (00:38:43)
t22: test.rc alignment4.rc -m32 CC=clang....................... Ok   (00:39:49)
t23: test.rc alignment5.rc..................................... Ok   (00:36:33)
t24: test.rc alignment6.rc..................................... Ok   (00:33:53)
t25: test.rc alignment7.rc..................................... Ok   (00:42:16)
t26: test.rc alignment8.rc sqlite3udl.c........................ Ok   (01:05:22)
t27: memdebug.rc extensions.rc................................. Ok   (01:35:56)
t28: fast.rc -fsanitize=undefined.............................. Ok   (00:15:09)
t29: min.rc -O3 -valgrind...................................... Ok   (01:26:10)
t30: min.rc -O3 -valgrind extensions.rc........................ Ok   (01:47:12)
t31: test-ex.rc................................................ Ok   (03:20:18)
*******************************************************************************
0 failures on 31 th3make runs and 166721387 tests in (16:25:29)
SQLite 3.8.10 2015-05-05 18:52:54 04afa3febee32854fbb09ef8d4ffffd432119716
</pre></blockquote>

<p>As can be seen above, a single run
of multitest.tcl invokes th3make dozens times and takes between 12 and 24
hours.  The middle section of the output shows the arguments to each individual
th3make run and the result and elapse time for that th3make.
All build products and output for the separate th3make runs are
captures in subdirectories for post-test analysis.
The two-line summary at the bottom shows the total number of errors and tests
over all th3make runs and the total elapse time, together with the 
[SQLITE_SOURCE_ID] information for the version of SQLite that was
tested.  This summary information is recorded in the
<a href="https://www.sqlite.org/checklists/3081000/index#c6">release
checklist</a> during testing.

<h2>4.0 Test Coverage</h2>

<p>Using one particular subset of the available TH3 test modules (the "cov1"
tests) SQLite obtained 
[test coverage | 100% branch test coverage] and 100% [MC/DC] as measured
by [http://gcc.gnu.org/onlinedocs/gcc/Gcov.html | gcov]
on Linux x86 and x86_64 hardware.  All releases of SQLite since
[version 3.6.17] (circa 2009-08-10) have been tested to this standard. 
The SQLite developers 
are committed to maintaining 100% branch coverage and MC/DC for all 
future releases of SQLite.</p>

<p>The cov1 test set used to obtain 100% branch test coverage are only a
subset of the tests currently implemented using TH3.  New test modules are
added on a regular basis.</p>

<h2>5.0 TH3 License</h2>

<p>SQLite itself is in the <a href="copyright.html">public domain</a> and
can be used for any purpose.  But TH3 is proprietary and requires a license.
</p>

<p>Even though open-source users do not have direct access to TH3, all
users of SQLite benefit from TH3 indirectly since each version of SQLite is
validated running TH3 on multiple platforms (Linux, Windows, WinRT, Mac,
OpenBSD, Solaris Sparc) prior to release.  So anyone using an official release
of SQLite can deploy their application with the confidence of knowing that
it has been tested using TH3.  They simply cannot rerun those tests
themselves without purchasing a TH3 license.</p>