/ Artifact Content
Login

Artifact c05c68d4dc2700a982f89133ce103a1a84cc285f:


# 2010 March 17
#
# The author disclaims copyright to this source code.  In place of
# a legal notice, here is a blessing:
#
#    May you do good and not evil.
#    May you find forgiveness for yourself and forgive others.
#    May you share freely, never taking more than you give.
#
#***********************************************************************
# This file implements regression tests for SQLite library.  The
# focus of this file is testing the operation of the library in
# "PRAGMA journal_mode=WAL" mode. The tests in this file use 
# brute force methods, so may take a while to run.
#

set testdir [file dirname $argv0]
source $testdir/tester.tcl
source $testdir/wal_common.tcl
source $testdir/lock_common.tcl

ifcapable !wal {finish_test ; return }

set testprefix walslow

proc reopen_db {} {
  catch { db close }
  forcedelete test.db test.db-wal
  sqlite3 db test.db
  execsql { PRAGMA journal_mode = wal }
}

db close
save_prng_state
for {set seed 1} {$seed<10} {incr seed} {
  expr srand($seed)
  restore_prng_state
  reopen_db
  do_test walslow-1.seed=$seed.0 {
    execsql { CREATE TABLE t1(a, b) }
    execsql { CREATE INDEX i1 ON t1(a) }
    execsql { CREATE INDEX i2 ON t1(b) }
  } {}

  for {set iTest 1} {$iTest < 100} {incr iTest} {

    do_test walslow-1.seed=$seed.$iTest.1 {
      set w [expr int(rand()*2000)]
      set x [expr int(rand()*2000)]
      execsql { INSERT INTO t1 VALUES(randomblob($w), randomblob($x)) }
      execsql { PRAGMA integrity_check }
    } {ok}

    do_test walslow-1.seed=$seed.$iTest.2 {
      execsql "PRAGMA wal_checkpoint;"
      execsql { PRAGMA integrity_check }
    } {ok}

    do_test walslow-1.seed=$seed.$iTest.3 {
      forcedelete testX.db testX.db-wal
      copy_file test.db testX.db
      copy_file test.db-wal testX.db-wal
  
      sqlite3 db2 testX.db
      execsql { PRAGMA journal_mode = WAL } db2
      execsql { PRAGMA integrity_check } db2
    } {ok}
  
    do_test walslow-1.seed=$seed.$iTest.4 {
      execsql { SELECT count(*) FROM t1 WHERE a!=b } db2
    } [execsql { SELECT count(*) FROM t1 WHERE a!=b }]
    db2 close
  }
}

#-------------------------------------------------------------------------
# Test case walslow-3.* tests that the checksum calculation detects single 
# byte changes to frame or frame-header data and considers the frame
# invalid as a result.
#
reset_db
do_test 3.1 {

  execsql {
    PRAGMA synchronous = NORMAL;
    PRAGMA page_size = 1024;
    CREATE TABLE t1(a, b);
    INSERT INTO t1 VALUES(1, randomblob(300));
    INSERT INTO t1 VALUES(2, randomblob(300));
    PRAGMA journal_mode = WAL;
    INSERT INTO t1 VALUES(3, randomblob(300));
  }

  file size test.db-wal
} [wal_file_size 1 1024]
do_test 3.2 {
  forcecopy test.db-wal test2.db-wal
  forcecopy test.db test2.db
  sqlite3 db2 test2.db
  execsql { SELECT a FROM t1 } db2
} {1 2 3}
db2 close
forcecopy test.db test2.db

foreach incr {1 2 3 20 40 60 80 100 120 140 160 180 200 220 240 253 254 255} {
  do_test 3.3.$incr {
    set FAIL 0
    for {set iOff 0} {$iOff < [wal_file_size 1 1024]} {incr iOff} {

      forcecopy test.db-wal test2.db-wal
      set fd [open test2.db-wal r+]
      fconfigure $fd -encoding binary
      fconfigure $fd -translation binary
  
      seek $fd $iOff
      binary scan [read $fd 1] c x
      seek $fd $iOff
      puts -nonewline $fd [binary format c [expr {($x+$incr)&0xFF}]]
      close $fd
    
      sqlite3 db2 test2.db
      if { [execsql { SELECT a FROM t1 } db2] != "1 2" } {set FAIL 1}
      db2 close
    }
    set FAIL
  } {0}
}


#-------------------------------------------------------------------------
# Test large log summaries.
#
# In this case "large" usually means a log file that requires a wal-index
# mapping larger than 64KB (the default initial allocation). A 64KB wal-index
# is large enough for a log file that contains approximately 13100 frames.
# So the following tests create logs containing at least this many frames.
#
# 4.1.*: This test case creates a very large log file within the
#        file-system (around 200MB). The log file does not contain
#        any valid frames. Test that the database file can still be
#        opened and queried, and that the invalid log file causes no 
#        problems.
#
# 4.2.*: Test that a process may create a large log file and query
#        the database (including the log file that it itself created).
#
# 4.3.*: Test that if a very large log file is created, and then a
#        second connection is opened on the database file, it is possible
#        to query the database (and the very large log) using the
#        second connection.
#
# 4.4.*: Same test as wal-13.3.*. Except in this case the second
#        connection is opened by an external process.
#
set ::blobcnt 0
proc blob {nByte} {
  incr ::blobcnt
  return [string range [string repeat "${::blobcnt}x" $nByte] 1 $nByte]
}

reset_db
do_execsql_test 4.1 {
  PRAGMA journal_mode = wal;
  CREATE TABLE t1(x, y);
  INSERT INTO "t1" VALUES('A',0);
  CREATE TABLE t2(x, y);
  INSERT INTO "t2" VALUES('B',2);
} {wal}
db close

do_test 4.1.1 {
  list [file exists test.db] [file exists test.db-wal]
} {1 0}
do_test 4.1.2 {
  set fd [open test.db-wal w]
  seek $fd [expr 200*1024*1024]
  puts $fd ""
  close $fd
  sqlite3 db test.db
  execsql { SELECT * FROM t2 }
} {B 2}
do_test 4.1.3 {
  db close
  file exists test.db-wal
} {0}

do_test 4.2.1 {
  sqlite3 db test.db
  execsql { SELECT count(*) FROM t2 }
} {1}
do_test 4.2.2 {
  db function blob blob
  for {set i 0} {$i < 16} {incr i} {
    execsql { INSERT INTO t2 SELECT blob(400), blob(400) FROM t2 }
  }
  execsql { SELECT count(*) FROM t2 }
} [expr int(pow(2, 16))]
do_test 4.2.3 {
  expr [file size test.db-wal] > [wal_file_size 33000 1024]
} 1

do_multiclient_test tn {
  incr tn 2

  do_test 4.$tn.0 {
    sql1 {
      PRAGMA journal_mode = WAL;
      CREATE TABLE t1(x);
      INSERT INTO t1 SELECT randomblob(800);
    }
    sql1 { SELECT count(*) FROM t1 }
  } {1}

  for {set ii 1} {$ii<16} {incr ii} {
    do_test 4.$tn.$ii.a {
      sql2 { INSERT INTO t1 SELECT randomblob(800) FROM t1 }
      sql2 { SELECT count(*) FROM t1 }
    } [expr (1<<$ii)]
    do_test 4.$tn.$ii.b {
      sql1 { SELECT count(*) FROM t1 }
    } [expr (1<<$ii)]
    do_test 4.$tn.$ii.c {
      sql1 { SELECT count(*) FROM t1 }
    } [expr (1<<$ii)]
    do_test 4.$tn.$ii.d {
      sql1 { PRAGMA integrity_check }
    } {ok}
  }
}

finish_test